Instead of maintaining the init refcount in regular event handlers that can
fire in case of hotplug or mode changes, use a dedicated sync callback
to wait for roundtrips.
The global_removal argument is the _name_ of the object.
We were comparing it to the _object id_ of the object.
To fix this, store the name at the time the object is bound.
We need to be a bit more careful when updating the screen
size - the code that was there would not do the right thing
if e.g. the width of one monitor was reduced.
We use a ref-count mechanism to track whether parts of the init sequence
still needs round trips to receive remaining initial state. Typically
we need a couple of roundtrips total to get the global list, then the
input and output configurations, but with the ref-count we avoid making
global assumptions like that.
https://bugzilla.gnome.org/show_bug.cgi?id=696340
Allow to set a GdkWindow to use a custom surface instead of a
wl_shell_surface. It allows to register the surface as a custom type
with some Wayland interface.
https://bugzilla.gnome.org/show_bug.cgi?id=695861
The GDK model for keymaps expects the keymap object to stay
around and emit a ::keys-changed signal. So, do that. This
should make layout changes work, but it remains untested since
weston does not support layout changes at runtime.
At the same time, plug a memory leak where GdkWaylandKeymap
forgot to free its xkb objects in finalize.
https://bugzilla.gnome.org/show_bug.cgi?id=696339
With this commit, we pick up xft settings from GSettings
as well. Among other things, this makes the Large Text
setting work. Still to do: pick up fontconfig changes without
having all clients use up inotify watches for all font
directories.
The check for GDK_CURSOR_IS_PIXMAP was ineffective, since _all_
cursors have this type, from the looks of it. Instead, store
buffer ownership information separately.
These might be candidates for a future settings interface; until
then, we use GSettings directly. Note again that we are careful
to avoid a dependency on GNOME schemas.
Key repeat under X is not affected by modifiers. And on some systems
(e.g my Thinkpad), NumLock is permanently on, rendering key repeat
nonfunctional. This commit changes the Wayland backend to do
key repeat regardless of modifiers.
http://bugzilla.gnome.org/show_bug.cgi?id=695497
Commit 0d9d808217 fixed the hotspot issue,
but commit f2cc52fddd then optimized away
cursor changes a little too aggressively. We always need to set the
cursor on enter. Make sure we clear the current cursor on leave so we
don't think it's already set on the next enter.
https://bugzilla.gnome.org/show_bug.cgi?id=695512
Until we figure out where we want to go with settings under
Wayland, this makes GTK+ applications a lot easier to deal
with under Wayland.
Note that we are careful to deal with the absence of schemas,
so this does not introduce a dependency on GNOME settings.
wl_pointer.set_cursor is rejected if the serial number doesn't match
the enter serial number for the wl_pointer. We passed the right serial
number when setting the cursor surface in response to the enter event.
Later set_cursor requests fail, but we can still attach new buffers to
our cursor surface, which is why the cursor changed, but the hotspot
didn't update. Clicking in the decoration results in a leave/enter pair
which triggers wl_pointer.set_cursor with the right serial. That's why
clicking the decoration sets the right cursor.
https://bugzilla.gnome.org/show_bug.cgi?id=695512
We need to pass the delta between the old and new hotspot
when attaching the new cursor surface, to keep the hotspot
at the same position. We can't deal with this in the compositor,
since the set_cursor call already overwrites the old hotspot,
so the information is lost by the time the attach happens.
Unfortunately, we can't query the initial hotspot from
the compositor, so the first cursor change will make the
hotspot jump.
https://bugzilla.gnome.org/show_bug.cgi?id=695512
Use separate fields for saving the window dimensions prior to fullscreening
and maximisation. Then use those fields to restore the window dimensions from.
With recent changes in attach semantics, we always need to attach before
committing. Without this changes to the window contents to not get reflected
in the content of the surface.
Signed-off-by: Rob Bradford <rob@linux.intel.com>
We currently use this information to display the title
string in the window list of the desktop shell.
Signed-off-by: Rob Bradford <rob@linux.intel.com>
When events are paused, we should not return TRUE from prepare() or check().
GTK+ handles this for events that are already in the GTK+ queue, but
we also need suppress checks for events that are in the system queue - if we
return TRUE indicating that there are events in the system queue, then we'll
call dispatch(), and do nothing. The event source will spin, and will never
run the other phases of the paint clock.
https://bugzilla.gnome.org/show_bug.cgi?id=694274
Deprecate gdk_window_enable_synchronized_configure() and
gdk_window_configure_done() and make them no-ops. Implement the
handling of _NET_WM_SYNC_REQUEST in terms of the frame cycle -
we know that all processing will be finished in the next frame
cycle after the ConfigureNotify is received.
Allows to access Wayland specific window information like wl_surface and
wl_shell_surface.
Add gdk_wayland_window_get_wl_surface for getting the Wayland wl_surface
and gdk_wayland_window_get_wl_shell_surface for getting the Wayland
wl_shell_surface.
In the Wayland backend implementation for gdk_display_get_keymap we enumerate
the known devices and look for an core keyboard device. These device objects
are created when we receive the capabilities for the seat. The seat
capabilities may be received after a request for the keymap so we handle this
by creating a temporary keymap which we then free later when we have the real
one.
libxkbcommon has had some changes to its API. However, it now has a
stable release (0.2.0), so this makes the necessary changes, and
replaces all uses of the deprecated API.
Signed-off-by: Ran Benita <ran234@gmail.com>
If we don't have a wl_seat - because a grab hasn't been initialised by GTK+
then fallback to making the shell surface transient to the parent rather than
a popup surface.
Review comment: I think the implementation of the vfuncs in gdkkeys-wayland.c
depend on that we're using the keysysm as the hardware keycode. I think that
needs to be evaluated for the future. But for now this patch gives reasonably
complete keyboard input.
Signed-off-by: Rob Bradford <rob@linux.intel.com>
This is then logically associated with the input device since each (keyboard)
input device has its own keymap.
Signed-off-by: Rob Bradford <rob@linux.intel.com>
Although GDK expects the keymap to be associated with the display under
Wayland this is really associated with the input device so expose this by
finding the first keyboard device.
Signed-off-by: Rob Bradford <rob@linux.intel.com>
We translate wayland pointer axis events to GDK smooth scroll events, to
implement pointer_handle_axis events.
https://bugzilla.gnome.org/show_bug.cgi?id=679986
Signed-off-by: Rob Bradford <rob@linux.intel.com>
This replaces the wl_input_device with wl_pointer, wl_keyboard, wl_touch all
tied together under a wl_seat.
This is quite a radical change in protocol and for now keyboard handling is
disabled.
This requires the SHM object be initialised - therefore this is the most
logical (if slightly ugly place.)
We also need to make sure that we do something clever to load the correct
cursor theme.
This allows combo box popup windows to appear in the correct place. This is a
workaround emulating root coordinates by calculating the offset for a chain
of windows that that are relative to each other.
Once we've made them popup windows we must also implement the popup_done event
handler on the shell surface listener. The best we can currently do is to hide
the window. This will then signal up to GTK which could then deactivate the
appropriate menu (see https://bugzilla.gnome.org/show_bug.cgi?id=670881)
This allows us to get the device if we need to make the window a popup. This
relies on the side effect that GTK calls into GDK to take a grab before the
popup window is shown.
Move g_return_if_fail() stuff from the backends to the public
functions in gdkscreen.c itself, and some fixes for ugly formatting in
the various gdkscreen-backend.c files.
Due to changes in the behaviour of the virtual modifiers around MOD1 the
implementation of the map_virtual_modifiers vfunc was mangling the modifiers
and making keybindings not work correctly.
This change updates the implementation to match the X11 implementation's
behaviour.
Callers of this function were passing in -1, -1 for the width and height if
they just wanted the window moving - rather than the size changing. We need to
respect that behaviour and don't try and set the width/height to those
dimensions.
Now pop-up windows (ala combo-boxes) work!
When we receive a configure event from Wayland telling us to resize our
surface we check against the geometry constraints for the window to ensure we
do not resize below the minimum and maximum limits.
Now that grab and ungrab vfuncs are implemented on GdkDevice then we can use
gdk_device_ungrab to break the implicit grab created by the button press that
triggered the resize and move.
An implicit grab is created inside GTK+ when the button is pressed down on a
window. The semantics of wl_shell_surface_resize means that you don't get a
corresponding release event that would ordinarily break the implicit grab. So
we must do it as part of the resize request.
This change follows on from a change in semantics in Wayland where calling
wl_input_device_attach with nil would make the compositor set the pointer
sprite to it's default cursor sprite.
The function returns the part of a monitors area that should be
used for positioning popups, menus, etc. The only non-trivial
implementation atm is in the X backend, all the other backends
just return the full monitor area. The X implementation is
currently suboptimal, since it requires roundtrips to collect
the necessary information. It should be changed to monitor
the properties for changes, when XFixes allows to monitor
individual properties.
https://bugzilla.gnome.org/show_bug.cgi?id=641999
Setup listener functions for the drag and drop events as well as the selection
events. Then create and save a data structure representing the data offer from
the other client.
This implementation is based on a hash table. The hard coded GtkSelection
atoms are preloaded into the hash table at the correct values. User generated
atoms start after the last preloaded atom.
The data device manager is a global object that provides the support
infrastructure around data devices. These data device objects are the basis
for handling drag and drop as well as selections in Wayland.
This means we don't have to have hardcoded "/usr/share/wayland" to find the
cursors.
This change also fixes up the warning messages for when loading fails.
Previously all the commands that acted on the shell took the surface that was
to be acted on as parameter. Now we retrieve an object from the shell that
represents its state for the surface. With that wl_shell_surface object we can
then call methods on that.
Signed-off-by: Kristian Høgsberg <krh@bitplanet.net>
In 2.x, the !HAVE_XCONVERTCASE fallback of keyval_convert_case() was
implicitly used as implementation for all !X11 backends.
In 3.x, when this function was virtualized in GdkDisplayManager,
this fallback was moved to the X11 backend and the other backends
"equipped" with /* FIXME implement */ implementations of
keyval_convert_case() which don't convert anything.
Move the fallback code back to gdk/ as default implementation
of GdkDisplayManager::keyval_convert_case() and remove its
implementations is all backends but X11. Also remove the
implementation in Wayland which was a plain copy of what
is now the default implementation.
(cherry picked from commit f46c1b76d8)
This will trigger a repaint of the window, but it may be more efficient
to just copy back the old surface contents and let gtk+ just update the
changed parts.
