The xdg_output interface has a `name` property that reflects the output
name coming from the compositor.
This is the closest thing we can get to a connector name.
Fixes: #1961
Previously, the GDK backend for Wayland would deduce the logical size
of the monitors from the wl_output size and scale.
With the addition of fractional scaling which advertises a larger scale
value and then scale down the client surface, the computed logical size
of the monitors in GDK would be wrong and confuse applications which
insist on using the monitor size and position (like Firefox).
The xdg-output protocol aims at describing outputs in a way which is more
in line with the concept of an output on desktop oriented systems by
presenting the outputs using their logical size and position appropriately
transformed.
Add support for the optional xdg-output protocol so that the size and
position of the monitors as reported by GDK is correct even when using
fractional scaling.
Fixes: https://gitlab.gnome.org/GNOME/gtk/issues/1828
Add private API to GDK to move these variables from the environment into
static scope. Also move the DESKTOP_STARTUP_ID validation here to reduce
code duplication.
Use constructors to read them as early as possible; however, do not
unset them until first requested. This avoids breaking gnome-shell and
gnome-settings-daemon, which want to use the DESKTOP_AUTOSTART_ID in
their own gnome-session clients.
Fixes https://gitlab.gnome.org/GNOME/gtk/issues/1761
The use of the startup ID is now twofold, we reply back with it to end any
corresponding startup notification, but we also use it on
gtk_surface1.request_focus to acknowledge that the activation might raise
the corresponding window.
We should preserve the startup ID for the second to work properly, so avoid
clearing it here. It is inconsequential if the underlying
gtk_shell1.set_startup_id request happens multiple times on no longer existing
startup IDs, so don't bother preventing that from happening.
Closes: https://gitlab.gnome.org/GNOME/gtk/issues/1754
This uses the gtk_surface1.request_focus request added in gtk-shell v3,
the given startup ID may be used by the compositor in order to determine
when was the request started, and whether user input happened in between.
Closes: https://gitlab.gnome.org/GNOME/gtk/issues/624
This functionality is similar to Linux's memfd. It creates anonymous shared memory without touching the filesystem, which allows it to work in Capsicum capability mode (sandbox).
This commit adds support the stable version of the xdg-shell protocol.
Support for the last version of the unstable series is left intact, but
will not receive new features.
The stable version is prioritized above the older version.
https://bugzilla.gnome.org/show_bug.cgi?id=791939
The internal known_globals hashtable is used to carry accounting for
interfaces that depend on others (as ordering is not guaranteed), extend
its usage so it also keeps track of unimplemented interfaces (here at
least).
The API call will then use this to allow querying the globals offered by
the compositor, it will be useful to determine whether we can use
text-input protocols or should fallback to other IMs.
If the compositor prefers server-side decorations and the client doesn't
customize the title bar, we disable client-side decorations and let the
compositor know. Otherwise, we continue to use client-side decorations.
Signed-off-by: Drew DeVault <sir@cmpwn.com>
https://bugzilla.gnome.org/show_bug.cgi?id=781909
Now that GTK windows have the ability to properly handle
per-edge tiling constraints, this patch extends GTK's
internal Wayland protocol to have a proper enum with the
relevant edge data.
Once this approach is validated, we can think of upstreaming
this work as an official Wayland protocol extension.
https://bugzilla.gnome.org/show_bug.cgi?id=783669
This adds support for the shortcut inhibitor protocol in gdk/wayland
backend.
A shortcut inhibitor request is issued from the gdk wayland backend for
both the older, deprecated API gdk_device_grab() and the new gdk seat
API gdk_seat_grab(), but only if the requested capability is for the
keyboard only.
https://bugzilla.gnome.org/show_bug.cgi?id=783343
If a bad behaving application tries to make the window/display beep too
often, throttle the beep requests so that we don't end up filling the
Wayland socket queue.
The throttle is set to 50 beeps per second, which far more beeps than
will ever make any sense from a user experience point of view, but will
avoid terminating due to an excessive amount of requests.
https://bugzilla.gnome.org/show_bug.cgi?id=778188
For wayland clients, the startup notification ID is currently only set
from the DESKTOP_STARTUP_ID environment variable. As that variable is
only set for clients launched via exec(), startup completion is not
indicated correctly for DBus-activated applications unless an explicit
ID is specified - usually that is not the case, as the default handling
uses gdk_notify_startup_complete().
To address this, we need API to set the startup notification ID from GTK
as we have on X11.
https://bugzilla.gnome.org/show_bug.cgi?id=768531
Add an API that enables an application to, given an exported window
handle, set its own window as a transient of the window associated with
the exported window handle.
https://bugzilla.gnome.org/show_bug.cgi?id=769788
Only update to using v2 headers/structs. The incompatible changes
to tool events are dealt with in the next commit. Pads aren't handled
in this commit either.
Debian stable currently ships with a 3.16 kernel, so
it doesn't have memfd available.
This commit adds shm_open fall back code for that case
(for now).
https://bugzilla.gnome.org/show_bug.cgi?id=766341
We currently use syscall() directly to invoke memfd_create,
since the function isn't available in libc headers yet.
The code, though, mishandles how errors are passed from syscall().
It assumes syscall returns the error code directly (but negative),
when in fact, syscall() uses errno.
Also, the code fails to retry on EINTR.
This commit moves the handling of memfd create to a helper function,
and changes the code to use errno and handle EINTR.
https://bugzilla.gnome.org/show_bug.cgi?id=766341
Given that Wayland has no global coordinate, the only way for gdk to
retrieve the monitor a window last entered is to retrieve it from the
GdkWaylandWindow itself.
Implement the backend specific get_monitor_at_window() to return the
monitor that was last entered by the window.
https://bugzilla.gnome.org/show_bug.cgi?id=766566
The naming of pointers to GdkWaylandDisplay's were inconsistent.
Running the following commands in gtk+/gdk/wayland illustrate the
inconsistency:
$ grep -r '\<display_wayland\>' *.[ch] | wc -l
195
$ grep -r '\<wayland_display\>' *.[ch] | wc -l
81
This patch renames all occurrences of "wayland_display" to
"display_wayland". This is also consistent with naming in the X11
backend. A couple of whitespace changes were done as well in places
where the rename was already done, that added line breaks to long lines
that stood out.
https://bugzilla.gnome.org/show_bug.cgi?id=765474
Only the management of tablets and tools is added so far. No tablet events
are yet interpreted.
As it's been the tradition in GTK+, erasers are split into their own device,
whereas the rest of the tools are meant to be routed through the
GDK_SOURCE_PEN device. Both pen/eraser devices are slaves to a master
pointer device, separate to wl_pointer's. This is so each tablet can
maintain its own cursor/positioning accounting.
Signed-off-by: Stephen Chandler Paul <thatslyude@gmail.com>
The gtk_shell protocol used some half baked unstable protocol semantics
that worked by only allowing binding the exact version of the
interface. This hack is a bit too confusing and it makes it impossible
to do any compatible changes without breaking things.
So, instead rename it to include a number in the interface names. This
way we can add requests and events without causing compatibility issues,
and we can later remove requests and events by bumping the number in
the interface names.
https://bugzilla.gnome.org/show_bug.cgi?id=763001
gdk_display_list_devices is deprecated and all the backends
implement the same fallback by delegating to the device manager
and caching the list (caching it is needed since the method does
not transfer ownership of the container).
The compat code can be shared among all backends and we can
initialize the list lazily only in the case someone calls the
deprecated method.
https://bugzilla.gnome.org/show_bug.cgi?id=762891
Implement it using the internal copy of the protocol. Otherwise,
we just deal with it the same than clipboard selection, just mapping
it to the PRIMARY atom instead of the CLIPBOARD one.
https://bugzilla.gnome.org/show_bug.cgi?id=762561
When running with a Wayland compositor which doesn't support the
xdg_shell interface, gtk+ will segfault while trying to access the
corresponding wl proxy.
Check for xdg_shell support and do not use Wayland if not present, so
that it can fallback to X11, hoping that Xwayland is usable.
Bugzilla: https://bugzilla.gnome.org/show_bug.cgi?id=762258
Right now we handle buffer releases coming from the
compositor in a central place. We add a listener when
first creating the shared buffers.
This is problematic because a buffer can only have
one listener on it at once so users of the buffer
can't get notified when it's released.
This commit moves the buffer listener code from the
centrally managed display code to the cursor and window
code.
https://bugzilla.gnome.org/show_bug.cgi?id=761312
The client and compositor share access to the window
pixel buffers. After the client hands off (commits)
the buffer to the compositor it's not supposed to write
to it again until it's released by the compositor.
The code tries to deal with this contention by allocating
a temporary buffer and using that in the mean time. This
temporary buffer is allocated by a higher layer of the code
when begin_paint returns TRUE. Unfortunately, that layer of
the code has no idea when the buffer is released, so it ends
up blitting the temporary buffer back to the shared buffer
prematurely.
This commit changes begin_paint to always return FALSE.
A future commit will address the contention problem in
a different way.
https://bugzilla.gnome.org/show_bug.cgi?id=761312
It looks like the gnome-continuous headers haven't quite
caught up yet, so try __NR_memfd_create instead.
If that doesn't work, i'll likely just add in a fallback
code path.
The tmpdir is used for a wide assortment of things, and
can easily fill up. If it fills then desktop will start
crashing with SIGBUS errors.
This commit changes the shm pool allocation code, to use
memfd_create, instead, so the shared memory files will
be anonymous and not associated with /tmp
https://bugzilla.gnome.org/show_bug.cgi?id=761095
create_shm_pool doesn't need the width or height, it just needs
the total size. By passing it in, we're requiring it to redo
stride calculation unnecessarily.
This commit drops the width and height parameters and makes the
function just take the total size directly.
https://bugzilla.gnome.org/show_bug.cgi?id=760897
Right now, we assume the stride for the image surface needs to
be 4 byte aligned. This is, in fact, true, but it's better to
ask cairo for the alignment requirement directly rather than
assume we know the alignment rules.
This commit changes the code to use cairo_format_stride_for_width
to calculate a suitable rowstride for pixman.
https://bugzilla.gnome.org/show_bug.cgi?id=760897
create_shm_pool unlinks the temporary file a little,
too late. It should be unlinked before ftruncate()
is called for two reasons:
1) if ftruncate fails, the file is currently not
getting cleaned up at all
2) in theory, if the file is public some other process
could muck with it
This commit just moves the unlink call a little higher
up.
https://bugzilla.gnome.org/show_bug.cgi?id=760897
This adds support for the new wl_pointer events available in v5.
The wl_pointer.axis_source events can be ignored for the purposes here, the
main reason they exist is so that the combination of axis_source=finger and
axis_stop triggers kinetic scrolling. We don't need to care about the source,
axis_stop is enough for us to tell us when we're scrolling.
The wl_pointer.frame events group events together and is intended as a
mechanism to coalesce events together. This for example allows us to now
send a single GTK scroll event for a diagonal scroll. Previously, the two
wl_pointer.axis events had to be handled separately.
The wl_pointer.axis_discrete event sends mouse wheel clicks where
appropriate, and is translated into up/down/left/right scroll events.
https://bugzilla.gnome.org/show_bug.cgi?id=756729
