g_input_stream_read_bytes() roughly provides the same guarantees
than g_input_stream_read() wrt the number of bytes being possibly
read (i.e. it being a best effort, but no real guarantees).
Instead, rely on the 0-len read that we'd get at the end of the
transfer.
Fixes clipboard/DnD transfers possibly being cut short, resulting
on "Broken pipe" errors on the other side.
https://gitlab.gnome.org/GNOME/gtk/issues/1Closes: #1
BTN_STYLUS3 is defined by the Linux 4.15 kernel and is sent when the
third button on a stylus is pressed. At the moment, only Wacom's "Pro
Pen 3D" has three stylus buttons. Pressing this button triggers a button
8 event to be sent under X11, so we use the same mapping here.
https://bugzilla.gnome.org/show_bug.cgi?id=790033
In order to map a window with the correct initial parent-child
relationship when a modal dialog is set up to be a child of an imported
foreign window, the relationship must be set up before the window is
mapped.
In order to do this, if a window is not yet mapped, postpone the
relationship setup until when the window is eventually mapped.
https://bugzilla.gnome.org/show_bug.cgi?id=791062
It is unlikely that popup windows will contain anything that requires this
(popup menus being more interested in redirecting keyboard focus to
themselves). OTOH popup implementations that just grab the keyboard are
commonplace enough, it makes sense not to trigger inhibition for these.
https://bugzilla.gnome.org/show_bug.cgi?id=789268
The wayland backend currently never emits GDK_SELECTION_CLEAR events.
GtkClipboard uses this signal in order to clear the clipboard owner when
the selection is set to something outside the application.
This commit ensures the wayland backend emits GDK_SELECTION_CLEAR before
setting the clipboard owner to NULL, as this means we lost the
selection.
Signed-off-by: Christophe Fergeau <cfergeau@redhat.com>
https://bugzilla.gnome.org/show_bug.cgi?id=790031
Otherwise, builds that include the Wayland backend fail.
Bug: https://bugzilla.gnome.org/show_bug.cgi?id=789630
Signed-off-by: Simon McVittie <smcv@debian.org>
Reviewed-by: Emmanuele Bassi <ebassi@gnome.org>
According to the documentation, gdk_monitor_get_geometry() reports the
monitor geometry in ”application pixels”, not in ”device pixels”,
meaning that the actual device resolution needs to be scaled down by the
scale factor of the output.
x11 backend does that downscaling, whereas Wayland backend did not,
causing a discrepancy depending on the backend used.
https://bugzilla.gnome.org/show_bug.cgi?id=783995
This state flag is used in several places in GTK+, for example to
ignore RESIZE_INC hints if tiled. Setting it is also necessary for
backwards compatibility with applications that changed their behaviour
when tiled, such as GNOME Terminal and its MATE fork.
Signed-off-by: Simon McVittie <smcv@debian.org>
https://bugzilla.gnome.org/show_bug.cgi?id=789357
If the compositor prefers server-side decorations and the client doesn't
customize the title bar, we disable client-side decorations and let the
compositor know. Otherwise, we continue to use client-side decorations.
Signed-off-by: Drew DeVault <sir@cmpwn.com>
https://bugzilla.gnome.org/show_bug.cgi?id=781909
Under Wayland, an xdg_surface.configure with size 0x0 means it's up to
the client to set its size.
When transitioning from maximized state to un-maximized, the Wayland
compositor will send such an 0x0 configure so that the client can
restore its original size.
However, the original size was already constrained, so re-applying
size constrains can lead to a smaller size when using size increments.
Avoid this caveat by not applying size constrains when we are restoring
the original size.
https://bugzilla.gnome.org/show_bug.cgi?id=777072
We were unnecessarily spewing warnings when blank cursors
were getting a new scale set. Standardize on "none" as the
name for blank cursors, and avoid the warning.
https://bugzilla.gnome.org/show_bug.cgi?id=775217
Now that GTK windows have the ability to properly handle
per-edge tiling constraints, this patch extends GTK's
internal Wayland protocol to have a proper enum with the
relevant edge data.
Once this approach is validated, we can think of upstreaming
this work as an official Wayland protocol extension.
https://bugzilla.gnome.org/show_bug.cgi?id=783669
This adds support for the shortcut inhibitor protocol in gdk/wayland
backend.
A shortcut inhibitor request is issued from the gdk wayland backend for
both the older, deprecated API gdk_device_grab() and the new gdk seat
API gdk_seat_grab(), but only if the requested capability is for the
keyboard only.
https://bugzilla.gnome.org/show_bug.cgi?id=783343
Adds support for creating scroll events from Wayland tablet wheel events.
Even though no Wacom tablet puck has a smooth-scrolling wheel, both event
types need to be generated to make the upper layers happy.
https://bugzilla.gnome.org/show_bug.cgi?id=783716
If a tablet device is used to perform actions like window moving or resizing,
GTK must provide the correct implicit grab serial number over Wayland to Mutter
in order for the action to succeed. This commit adds tablet support to the
implicit serial getters.
https://bugzilla.gnome.org/show_bug.cgi?id=777333
If a bad behaving application tries to make the window/display beep too
often, throttle the beep requests so that we don't end up filling the
Wayland socket queue.
The throttle is set to 50 beeps per second, which far more beeps than
will ever make any sense from a user experience point of view, but will
avoid terminating due to an excessive amount of requests.
https://bugzilla.gnome.org/show_bug.cgi?id=778188
Under Wayland, when multiple keys are pressed and the user releases a
key, key repeat should continue unless the key released is the one
currently repeating.
In the case of:
- key1 press
- key1 repeat
- key2 press -> key1 repeat stopped
- key2 repeat
- key2 release
The behavior should be to cancel keyboard repeat, though key1 is still
held down. This is consistent with prior X11/XWayland behavior.
The following also must work:
- key1 press
- key2 press
- key2 release
- key2 press
- key1 release
- key2 should continue to repeat
The fix for bug #778019 should continue to work:
- key1 press
- key1 repeat
- key2 press -> key1 repeat stopped
- key1 release
- key2 should repeat
The choice to change the counter nkeys to the flag repeat_active
helps to solve the second test case.
https://bugzilla.gnome.org/show_bug.cgi?id=781285
begin_resize_drag() and begin_move_drag() check for xdg_surface being
not null, but those apply on xdg_toplevel so they should check for
xdg_toplevel being non-null instead.
https://bugzilla.gnome.org/show_bug.cgi?id=781945
When an event is received while a tooltip is showing, the GtkTooltip's
event handling code can end up calling gdk_window_set_transient_for()
from gtk_tooltip_set_last_window().
The Wayland GDK backend will try to automatically create a subsurface
in gdk_wayland_window_set_transient_for() but if the parent surface is
gone meanwhile, this will will cause a crash when trying to create a
subsurface from a parent with a null surface.
Checking for the parent is not sufficient, we ought to check for the
parent surface as well to avoid the crash.
https://bugzilla.gnome.org/show_bug.cgi?id=782283
Applications can specify the type hint as utility even on toplevel
windows.
When that toplevel is also marked as a transient for another window,
GDK Wayland backend would translate that as an xdg_popup which is not
appropriate.
While utility temp windows should remain mapped as subsurfaces (such as
the ones used by treeviews), regular windows should not translate as
neither a subsurface nor an xdg_popup.
https://bugzilla.gnome.org/show_bug.cgi?id=781945
There is no need to have every application log a warning when the
Wayland display server goes away, and we are using _exit instead of
exit elsewhere.
This is also what the X11 backend does (see gdk_x_io_error).
https://bugzilla.gnome.org/show_bug.cgi?id=745289
Aborting the application makes it look like an application bug, when
it is the expected thing to do when the Wayland display server goes
way. eg., when the user logs out. The log level is also demoted to
avoid a storm of warnings in the log from all applications whenever
this happens.
This is also what the X11 backend does (see gdk_x_io_error).
https://bugzilla.gnome.org/show_bug.cgi?id=783047
Allow getting the same export handle multiple times by calling
gdk_wayland_window_export_handle() multiple times. For each time
export() is called, a unexport() must be called to unexport.
When the window is already exported, the exported callback is called
via a idle handler. If there are multiple export() calls, they are
invoked in order either when the handle is received by the display
server, or when the idle callback is invoked.
Calling unexport() will not affect future invokations of the exported
callback, unless all export() calls have their unexport() call count
matched.
https://bugzilla.gnome.org/show_bug.cgi?id=782325
Use the gravity enum values when converting to gravity. It doesn't fix
anything, since the enum values were identical, but it makes a coverity
warning go away.
https://bugzilla.gnome.org/show_bug.cgi?id=780301
With Wayland, GDK_DEBUG=events would log key events but not explicitly
state whether the event is a key press or release, or if it's
originating from a key repeat.
Add some more verbosity to make sure these informations are logged on
key delivery when GDK_DEBUG is set.
https://bugzilla.gnome.org/show_bug.cgi?id=781767
It is generally a good idea to license individual files under the
same terms as the project license (in particular when the mismatch
boils down to having copied the wrong license header), so relicense
the code under the LGPL.
https://bugzilla.gnome.org/show_bug.cgi?id=781422
