Commit c415bef5de introduced support for the new _GTK_EDGE_CONSTRAINTS
atom. If the compositor supports that atom, however, we were always
setting the tiled state, even if no actual tiling information is
available, where the correct action is to completely remove any traces
of the tiled state.
Fix that by correctly removing the tiled state when compositor supports
_GTK_EDGE_CONSTRAINTS Xatom.
https://bugzilla.gnome.org/show_bug.cgi?id=788516
Following the previous patch, where edge constraints support
was added to the Wayland backend, this patch introduces the
necessary code to handle the _GTK_EDGE_CONSTRAINTS atom from
X11 backend.
https://bugzilla.gnome.org/show_bug.cgi?id=783669
Now that GTK windows have the ability to properly handle
per-edge tiling constraints, this patch extends GTK's
internal Wayland protocol to have a proper enum with the
relevant edge data.
Once this approach is validated, we can think of upstreaming
this work as an official Wayland protocol extension.
https://bugzilla.gnome.org/show_bug.cgi?id=783669
These states will be consumed by GtkWindow in order to
have better edge management on tiling situations. Their
values are supplied by the compositor, and will be send
through and X11 Atom or a Wayland protocol extension.
https://bugzilla.gnome.org/show_bug.cgi?id=783669
gdk_seat_default_grab() grabs POINTER_EVENTS if the capability is
GDK_SEAT_CAPABILITY_ALL_POINTING. But that enumerator is a union that
includes GDK_SEAT_CAPABILITY_TOUCH, but we never grabbed TOUCH_EVENTS,
an unused macro that was presumably created with this purpose in mind.
So, check which of the ALL_POINTING capabilities we have, and set the
right mask of POINTER_EVENTS and/or TOUCH_EVENTS as required.
As part of this, explicitly let TABLET_STYLUS take over pointer events,
as this is the intended behaviour and was the effective result before.
This should fix touch events being lost in migrating from Device.grab()
to Seat.grab(GDK_SEAT_CAPABILITY_ALL_POINTING), as found by Inkscape.
https://bugzilla.gnome.org/show_bug.cgi?id=781757
Under X, we were not setting the right drag cursor initially,
because at current_action == action == 0, initially. Fix this
by explicitly using the right cursor when grabbing.
Commit 1d0fad3 revealed that there were some assumptions made that were
actually to compensate for the bug fixed by that commit, so we need to
remove those assumptions as they would result in AerSnap to not work
properly on HiDPI screens.
Also re-do how we set the x and y positions of our GdkWindow, so that we
are more consistent across the board when we go between a GDK window
coordinate and a Windows API window cooredinate.
This would also simplify the code a bit.
https://bugzilla.gnome.org/show_bug.cgi?id=785999
This property contains 5 integers, of which the last 2 respectively
contain the tool serial number and tool ID. We were only extracting the
first so far, but GdkDeviceTool also has API getters for the latter,
which remained 0.
https://bugzilla.gnome.org/show_bug.cgi?id=786400
This adds support for the shortcut inhibitor protocol in gdk/wayland
backend.
A shortcut inhibitor request is issued from the gdk wayland backend for
both the older, deprecated API gdk_device_grab() and the new gdk seat
API gdk_seat_grab(), but only if the requested capability is for the
keyboard only.
https://bugzilla.gnome.org/show_bug.cgi?id=783343
This check must be done explicitly on Wayland as the master device for
tablet tools differ from the Core Pointer. This ensures that whenever a
tablet tool is inside a window and the cursor is programmatically changed,
it will be visually updated too.
https://bugzilla.gnome.org/show_bug.cgi?id=785375
Adds support for creating scroll events from Wayland tablet wheel events.
Even though no Wacom tablet puck has a smooth-scrolling wheel, both event
types need to be generated to make the upper layers happy.
https://bugzilla.gnome.org/show_bug.cgi?id=783716
If a tablet device is used to perform actions like window moving or resizing,
GTK must provide the correct implicit grab serial number over Wayland to Mutter
in order for the action to succeed. This commit adds tablet support to the
implicit serial getters.
https://bugzilla.gnome.org/show_bug.cgi?id=777333
If a bad behaving application tries to make the window/display beep too
often, throttle the beep requests so that we don't end up filling the
Wayland socket queue.
The throttle is set to 50 beeps per second, which far more beeps than
will ever make any sense from a user experience point of view, but will
avoid terminating due to an excessive amount of requests.
https://bugzilla.gnome.org/show_bug.cgi?id=778188
Wacom tablets often have a "pad" device which houses multiple buttons. At
present, these devices are incorrectly marked as GDK_SOURCE_PEN which can
cause problems for some software.
https://bugzilla.gnome.org/show_bug.cgi?id=782040
Under Wayland, when multiple keys are pressed and the user releases a
key, key repeat should continue unless the key released is the one
currently repeating.
In the case of:
- key1 press
- key1 repeat
- key2 press -> key1 repeat stopped
- key2 repeat
- key2 release
The behavior should be to cancel keyboard repeat, though key1 is still
held down. This is consistent with prior X11/XWayland behavior.
The following also must work:
- key1 press
- key2 press
- key2 release
- key2 press
- key1 release
- key2 should continue to repeat
The fix for bug #778019 should continue to work:
- key1 press
- key1 repeat
- key2 press -> key1 repeat stopped
- key1 release
- key2 should repeat
The choice to change the counter nkeys to the flag repeat_active
helps to solve the second test case.
https://bugzilla.gnome.org/show_bug.cgi?id=781285
begin_resize_drag() and begin_move_drag() check for xdg_surface being
not null, but those apply on xdg_toplevel so they should check for
xdg_toplevel being non-null instead.
https://bugzilla.gnome.org/show_bug.cgi?id=781945
When an event is received while a tooltip is showing, the GtkTooltip's
event handling code can end up calling gdk_window_set_transient_for()
from gtk_tooltip_set_last_window().
The Wayland GDK backend will try to automatically create a subsurface
in gdk_wayland_window_set_transient_for() but if the parent surface is
gone meanwhile, this will will cause a crash when trying to create a
subsurface from a parent with a null surface.
Checking for the parent is not sufficient, we ought to check for the
parent surface as well to avoid the crash.
https://bugzilla.gnome.org/show_bug.cgi?id=782283
Applications can specify the type hint as utility even on toplevel
windows.
When that toplevel is also marked as a transient for another window,
GDK Wayland backend would translate that as an xdg_popup which is not
appropriate.
While utility temp windows should remain mapped as subsurfaces (such as
the ones used by treeviews), regular windows should not translate as
neither a subsurface nor an xdg_popup.
https://bugzilla.gnome.org/show_bug.cgi?id=781945
There is no need to have every application log a warning when the
Wayland display server goes away, and we are using _exit instead of
exit elsewhere.
This is also what the X11 backend does (see gdk_x_io_error).
https://bugzilla.gnome.org/show_bug.cgi?id=745289
Aborting the application makes it look like an application bug, when
it is the expected thing to do when the Wayland display server goes
way. eg., when the user logs out. The log level is also demoted to
avoid a storm of warnings in the log from all applications whenever
this happens.
This is also what the X11 backend does (see gdk_x_io_error).
https://bugzilla.gnome.org/show_bug.cgi?id=783047
Allow getting the same export handle multiple times by calling
gdk_wayland_window_export_handle() multiple times. For each time
export() is called, a unexport() must be called to unexport.
When the window is already exported, the exported callback is called
via a idle handler. If there are multiple export() calls, they are
invoked in order either when the handle is received by the display
server, or when the idle callback is invoked.
Calling unexport() will not affect future invokations of the exported
callback, unless all export() calls have their unexport() call count
matched.
https://bugzilla.gnome.org/show_bug.cgi?id=782325
We used to inject the inclusion of the generated header file into the
generated body of the marshallers source code in order to avoid compiler
warnings about missing prototypes. The glib-genmarshal utility has been
fixed in GLib to include the prototype in the generated source, so now
we're going to trip -Werror=redundant-decls.
Use the gravity enum values when converting to gravity. It doesn't fix
anything, since the enum values were identical, but it makes a coverity
warning go away.
https://bugzilla.gnome.org/show_bug.cgi?id=780301
With Wayland, GDK_DEBUG=events would log key events but not explicitly
state whether the event is a key press or release, or if it's
originating from a key repeat.
Add some more verbosity to make sure these informations are logged on
key delivery when GDK_DEBUG is set.
https://bugzilla.gnome.org/show_bug.cgi?id=781767
