Additionally to gtk_primary_selection, the gtk-private predecessor,
support the upstream unstable protocol.
This allows the primary selection to work on Kwin and potentially
other compositors, as well as dropping the private version eventually.
Closes https://gitlab.gnome.org/GNOME/gtk/-/issues/2591
If NULL is returned, probably the client shouldn't advertise the
mimetype. Make it sure we forget entirely about the attempt to
cache this mimetype, as it'll be mistaken as pending otherwise.
Dropping this cached selection will in consequence close the fd
of all pending readers, which seems appropriate for NULL content.
https://gitlab.gnome.org/GNOME/gtk/issues/2456
The only way to have G_IO_ERROR_CANCELLED in the write callback
goes through having the array of pending writers already cleared.
It should not access the invalid AsyncWriteData and StoredSelection
in that case.
Cache separately the selection contents for each given window/selection/atom
combination, and keep the requestors separate for each of those.
This allows us to incrementally request multiple mimetypes, and dispatch
the requestors as soon as the data is up. This stored selection content is
cached until the selection owner changes, at which point all pending readers
could get their transfers cancelled, and the stored content for the selection
forgotten.
We are interested in changing the owner window, so the upper bits know
that it is not this client who owns the selection. We are still not
interested in unsetting the selection desktop-wide though, so only avoid
emitting the relevant events then.
The same reasonings than in commit 7a891eeb6d apply otherwise.
This should just be called by the upper layers (and result in
wl_data_device.set_selection, etc). We should not trigger this within
the backend otherwise.
Related: https://gitlab.gnome.org/GNOME/mutter/issues/878
This should only be explicitly unset (face to the windowing) on
gdk_selection_owner_set() with a NULL window. Other circumstances
(eg. selection being taken over by another client) should just
trigger the SelectionClear event in GDK internally.
Related: https://gitlab.gnome.org/GNOME/mutter/issues/878
g_input_stream_read_bytes() roughly provides the same guarantees
than g_input_stream_read() wrt the number of bytes being possibly
read (i.e. it being a best effort, but no real guarantees).
Instead, rely on the 0-len read that we'd get at the end of the
transfer.
Fixes clipboard/DnD transfers possibly being cut short, resulting
on "Broken pipe" errors on the other side.
https://gitlab.gnome.org/GNOME/gtk/issues/1Closes: #1
The wayland backend currently never emits GDK_SELECTION_CLEAR events.
GtkClipboard uses this signal in order to clear the clipboard owner when
the selection is set to something outside the application.
This commit ensures the wayland backend emits GDK_SELECTION_CLEAR before
setting the clipboard owner to NULL, as this means we lost the
selection.
Signed-off-by: Christophe Fergeau <cfergeau@redhat.com>
https://bugzilla.gnome.org/show_bug.cgi?id=790031
This has most notably impact in selection buffers, because those were
shared across all selection atoms. This turned out wrong on 2 situations:
- Because the selection atom was set at SelectionBuffer creation time, the
GDK_SELECTION_NOTIFY events generated will have unexpected info if the
buffer is attempted to be reused for another selection.
- Anytime different selections imply different stored content for the same
target.
This is better separated into per-selection buffers, so it's not possible
to get collisions if a same target is used across different selections.
https://bugzilla.gnome.org/show_bug.cgi?id=768177
The sanitize_utf8() function has been copied from X11 so both
backends behave the same. This allows interaction with older clients
(mainly through Xwayland, and the STRING selection target) that
request non-utf8 text.
https://bugzilla.gnome.org/show_bug.cgi?id=768082
The naming of pointers to GdkWaylandDisplay's were inconsistent.
Running the following commands in gtk+/gdk/wayland illustrate the
inconsistency:
$ grep -r '\<display_wayland\>' *.[ch] | wc -l
195
$ grep -r '\<wayland_display\>' *.[ch] | wc -l
81
This patch renames all occurrences of "wayland_display" to
"display_wayland". This is also consistent with naming in the X11
backend. A couple of whitespace changes were done as well in places
where the rename was already done, that added line breaks to long lines
that stood out.
https://bugzilla.gnome.org/show_bug.cgi?id=765474
This request actually means nothing to the upper GDK layers,
we used to preempt a GDK_SELECTION_REQUEST event, but this is too
eager, and not like things work in X11.
Originally in wayland, this event may be used for feedback purposes.
We however don't perform any mimetype-based feedback, so we can
safely ignored.
This makes data_source_send() the only place where we actually
trigger GDK_SELECTION_REQUEST, this one is conceptually the same
than the X11 selection request event.
I am testing GTK+ master against mutter 3.19.90, so I'd
like GTK+ to survive even when the compositor does not
support the primary selection interface.
Implement it using the internal copy of the protocol. Otherwise,
we just deal with it the same than clipboard selection, just mapping
it to the PRIMARY atom instead of the CLIPBOARD one.
https://bugzilla.gnome.org/show_bug.cgi?id=762561
We should conform to a minimal set of reasons for the gtk side to emit
a better GtkDragResult than GTK_DRAG_RESULT_ERROR. This fixes the notebook
tab DnD feature, where we rely on GTK_DRAG_RESULT_NO_TARGET.
In the wayland side, unfortunately we can't honor either NO_TARGET nor
USER_CANCELLED, we don't know of the latter, so we could return false
positives on the former.
https://bugzilla.gnome.org/show_bug.cgi?id=761954
In most places, we can do with the pointer/keyboard of the default seat
instead of the client pointer. We can also remove some code from
gdk_input_init() because we know for sure there's no floating devices to
care about here.
If we "release" the button first, the drag will be eventually cancelled,
we must first signal GDK_DROP_FINISHED, and then release the button so
the success status prevails.
It doesn't make a lot of sense to have this stored as data offer data,
rather together with the source_targets array, which is what we're
poking here in the end.
https://bugzilla.gnome.org/show_bug.cgi?id=758713
Dissociate ownership from our maintenance of wl_data_source objects.
The only place where ownership must be updated together is
data_source.cancelled, for the other places GDK should take care of
setting up the right ownership, even if at a different order than
we'd expect here.
This fixes GTK+ apps on wayland being locally confused about the
current selection ownership. Because gtk_selection_add_targets()
results in a wl_data_source being created, and ownership being
updated right away, early callers of this will change the ownership
even if the widget it's being called on didn't explicitly request
the selection ownership yet.
https://bugzilla.gnome.org/show_bug.cgi?id=758660
We mistakenly forced the "STRING" type, which was able to confuse higher
layer helpers like gtk_selection_data_get_uris(). This fixes a crash
happening anytime a drop is attempted on a GtkPlacesSidebar.
Currently, due to the lack of progress information in the Wayland DnD
protocol, we assume a DnD operation is finished after the first
data_source.send is finished (It's either that or leaving stuck grabs).
This however breaks previous assumptions that dest widgets can request
the data multiple times, even in response to GtkWidget::drag-motion.
This leaves us with a NULL owner for the DnD atom when we aren't
finished receiving wl_data_source events yet, causing a crash.
This commit fixes the crash, the behavior left is still far from
desirable though...
We currently only hold the last offer received, which is wrong, as both
are independent and have different life cycles.
This means we have to store per-selection wl_data_offer and targets, and
maintain these as appropriate from the clipboard/DnD specific entry points.
This oddly can be reproduced with weston+weston-dnd, when dragging
anything from GTK+ into weston-dnd, it will insist on picking its
custom application/x-wayland-dnd-flower mimetype, and this request
forwarded by the compositor, even if GTK+ didn't announce it on
its wl_data_source mimetype list. (What should probably happen here
is that the request is silenced, and/or weston-dnd picks (null))
This should be harmless, we are leaking though the fd in that case,
because the emission of GdkEventSelection on an unhandled mimetype
results in NOP. In order to avoid this, we should check whether the
mimetype is supported at all on the backend code and possibly close
the fd, this involves storing these in the first place.
https://bugzilla.gnome.org/show_bug.cgi?id=751414
If the other peer requests data too fast (too rare/unlikely though),
we might receive multiple gdk_wayland_selection_request_target() calls
with no ending gdk_wayland_selection_check_write(), in which case the
fd is leaked as no GOutputStream was created to take over it.
https://bugzilla.gnome.org/show_bug.cgi?id=751414
We weren't catching all the places where the AsyncWriteData operation
should be cancelled, which could happen if we repeatedly request the
same target on different fds.
https://bugzilla.gnome.org/show_bug.cgi?id=751414
At the moment we create the AsyncWriteData, the ownership of the
fd is granted to the GOutputStream, and the fd set to -1, so at
this moment we're just silently getting EBADFD.
This partially reverts 25885ca600, the initialization of .fd
to -1 is valid and stays though.
https://bugzilla.gnome.org/show_bug.cgi?id=751414
The fd must be closed on async_write_data_free(), but we should also
initialize it to -1 so gdk_wayland_selection_check_write() doesn't wrongly
pick the stdin fd.
https://bugzilla.gnome.org/show_bug.cgi?id=751414
During copy/paste, it may be common that we receive several property changes
around the selection atom, this results in warnings when cancelling the previous
write attempt. We already honor the last request properly, so we should just
cancel silently.
The wl_data_source may be the clipboard's. Looking up the drag context in
order to get the display isn't going to fare well there. So, just use the
default display, and only look up the drag context when we know we need it.
https://bugzilla.gnome.org/show_bug.cgi?id=746386
