This gets the current cell area of a particular item. Its similar
to gtk_tree_view_get_cell_area().
The code is extracted from gtk_icon_view_set_tooltip_cell which now
just calls the old code.
https://bugzilla.gnome.org/show_bug.cgi?id=678418
If the icon view is empty, we cannot get a reasonable size request from
the cell renderers. So all values we would compute are pretty much
useless.
So we special case it.
This also gets rid of a bunch of crashers from div-by-0 in corner cases.
https://bugzilla.gnome.org/show_bug.cgi?id=677809
This is useful for 2 reasons:
(1) Items actually exist and are clickable
(2) Size computations don't divide by 0
I've not seen problems with this in the wild (mostly because
item-padding defaults to non-0), but noticed this while fixing other
bugs.
Minimum size is necessary so you can see the item. If we can't get that
we need to scroll.
Natural as the maximum is used so that the spacing between items doesn't
increase when resizing the iconview, but empty space is added to the
right/bottom instead.
https://bugzilla.gnome.org/show_bug.cgi?id=677809
While working on the "iconview: Don't shrink items" patch I noticed that
gtk_icon_view_compute_n_items_for_size modifies the natural and minimum
item sizes it got from gtk_icon_view_get_preferred_item_size when
calculating the max number of items which will fit, but later on it
checks against these sizes when calculating the item_size, and these
checks expect these values to be unmodified.
This patch fixes this by modifying the natural and minimum values in
advance and doing all computations with modified values.
https://bugzilla.gnome.org/show_bug.cgi?id=677809
The previous code assumed that the width was always enough for more than
one column, which is obviously not correct when a number of columns is
hardcoded.
With this patch, it will now always check that the width is enough and
otherwise cause scrolling.
https://bugzilla.gnome.org/show_bug.cgi?id=677809
Code was using different places to compute the icon size when layouting
and when doing size requests. This resulted in non-matching behavior in
obscure cases. And that lead to iconviews that were too small.
This ensures that items stay left-aligned instead of slowly expanding into
empty space when widening the iconview. It's also what the iconview did
pre-refactoring.
Note that for cases where natural width != minimum width, the cells
might still expand and shrink back.
Always assume max-columns and min-rows. The old approach was kinda
insane.
As an example, try to write an algorithm that optimizes the minimum size
for infinite (take a reasonably large number like 2520) word-wrapped
Monospace text cells containing the text "XXXXX XXX XXX XXXXX" (keep in
mind that this is the easy problem, because it's assuming equal cell
renderers). There's 4 ways to reasonably lay out this text:
19 glyphs (19x1):
XXXXX XXX XXX XXXXX
18 glyphs (9x2):
XXXXX XXX
XXX XXXXX
21 glyphs (7x3):
XXXXX
XXX XXX
XXXXX
20 glyphs (5x4):
XXXXX
XXX
XXX
XXXXX
The best thing to do usually is using the 9x2 approach, but that's
neither the one using the natural nor the one using the minimum size.
As a side note, this does not include spacing and padding, which might
also influence the decision. Nor does it include height-for-width
considerations. Look at this table (numbers given in glyphs, not pixels,
as for pixel-sizes it gets even more interesting):
given best solution
width columns sizing glyphs per cell
6 1 6x4 20
7 1 7x3 21
8 1 7x3 24
9 1 9x2 18
10 1/2 9x2/5x4 20
11 1/2 9x2/5x4 22
12 1/2 9x2/5x4 24
13 1/2 9x2/5x4 26
14 2 7x3 21
15 3 5x4 20
16 3 5x4 21.3
17 3 5x4 22.7
18 2 9x2 18
19 1/2 19x1/8x2 19
20 1/2/4 19x1/8x2/5x4 20
21 1-4 any 21
22 1-4 any 22
23 1-4 any 23
24 1-4 any 24
25 5 5x4 20
26 5 5x4 20.8
27 3 9x2 18
28 3 9x2 18.7
29 3 9x2 19.3
30 3/6 9x2/5x4 20
Now of course, nobody wants the number of columns to randomly change in
inexplicable ways while they enlarge or shrink an iconview, so we not
only have to optimize for smallest or other size measurements, but we
also have to optimize for "most pleasing to the eye".
And last but not least, I'd like to once again remind you - if you kept
up until now - that this discussion was for identically-sized cells
only.
Instead of just returning the last allocated numbers, we now compute the
proper sizes from scratch. This is a bit less trivial, but it results in
proper height-for-width handling.
This is a huge quest to remove all caching from GtkIconview to simplify
the code. As it turns out, iconview performance is a joke, so the caches
are kinda unnecessary.
If we need caching, we can add it in a useful way later.
If we use
&item->cell_area
instead of
(GdkRectangle *) item
there is no need anymore to keep the cell_area as the first member of
the the item. And we cget compile-time checks for changes to the item
struct.
This can cause lagging when scrolling as it causes us to repaint
on every scroll event. This wasn't historically a great problem,
but with smooth scrolling we get a lot more events, so this
now creates visible lagging on slower machines.
The widget window is usually covered by the bin_window.
Its background color will become relevant when we introduce
kinetic scrolling with overshooting.
As the draw handler expects the items to be laid out already, we cannot
queue a layout here to avoid a race condition with the resize that is
queued immediately after, which in turn would lead to a segfault later
in the paint_item() implementation.
https://bugzilla.gnome.org/show_bug.cgi?id=663138
which are SHIFT and MOD2 on the Mac, and SHIFT and CONTROL otherwise.
Use the new define all over the place and rename variables and
members to not say "shift" or "control".
Render GtkIconView cell items with the prelight state flag when they're
being mouse hovered.
This works basically in the same way it's done for GtkTreeView cells,
and e.g. GtkCellRendererPixbuf will need to have its follow-state
property to opt in to prelight rendering.
https://bugzilla.gnome.org/show_bug.cgi?id=615501
The code sets old_adj_ptr to the location containing the old weak ref,
but then wants to remove a weak ref from &view->old_hadj, causing warnings
when disposing the widget.
This commit introduces a new setting, gtk-visible-focus, backed
by the Gtk/VisibleFocus X setting. Its three values control how
focus rectangles are displayed.
'always' is equivalent to the traditional GTK+ behaviour of always
rendering focus rectangles.
'never' does what it says, and is intended for keyboardless
situations, e.g. tablets.
'automatic' hides focus rectangles initially, until the user
interacts with the keyboard, at which point focus rectangles
become visible.
https://bugzilla.gnome.org/show_bug.cgi?id=649567
In this patch we adress rows_reordered() and row_deleted() callbacks
(since some icon view subclasses manipulate the connected treemodel
from _init()).
Adding these cases here to cater to icon view subclasses that want to
access icon view APIs from the instance structure initializer instead
of properly waiting for the super class to initialize and adding renderers
from the ->constructor() vfunc.
I've decided that it is isn't feasible to make cell areas runtime-settable
in the time we have left before 3.0, therefore, I'm going with the
approach to allow init() functions to instantiate the default cell area
and issue a warning if a construct property is ignored.
This is not ideal, but it keeps existing icon view and combo box
subclasses working.
https://bugzilla.gnome.org/show_bug.cgi?id=639139
This change does not introduce any functionality change, mostly
cosmtic cleanups, like re-linebreak when introduced annotations messed
up indentation or whitespace errors fixes.
Seems the redraw was not happenning from keynav when set_focus_cell()
was called because keynav already updates the focus-cell. Now we
just unconditionally redraw the focus item when set_focus_cell() is
called.
Icon View was not initially setting focus on a cell when
focus initially comes into the view. Focusing into whatever
is the first cell in the cursor item when set_cursor_item
is called with a NULL cell fixes this.
GtkIconView sets the minimum width of the text cell to be at least 50
pixels and otherwise twice the width of the first pixbuf cell found
in the icon list.
GtkIconView should have a "grow-only" mode to handle optimization to
only allow icons to grow in width when rows change, however since
GtkIconView still does not handle large numbers of rows for now we'll
just relayout the whole thing whenever a series of rows change.
Also fixed up to watch the context incase of implicit resets.
of each row.
GtkIconView now properly calculates the height of each row separately
using a separate GtkCellAreaContext stored in an array which it can
always easily index with the item->row index for all purposes.
However, I'm going to have to figure a way to store the alignments
for rows separately, this may involve using a separate GtkCellAreaContext
for each row, unfortunately.
Some things still not sorted out, GtkCellAreaContext is not allocated
so icons dont recieve alignments yet, focus navigation is not exactly
what it used to be (maybe we can work around that by observing the
item orientation and explicitly setting focus to the same cell when
navigating in the wrong orientation).
This patch adds the GtkScrollablePolicy type property to GtkScrollable
and implements it in all subclasses. GtkScrolledWindow observes this
property to make a good guess about when to show/hide scrollbars for
height-for-width content.
Most scrollable children do not do height-for-width *yet* but
most certainly will (toolpalette, treeview, iconview, textview
widgets all TODO), for scrollable widgets that do have a minimum
and natural size, it's important for them to observe the state
of this property in order to properly drive the scroll adjustments
according to the desired GtkScrollablePolicy. This patch makes
GtkViewport do this.
Patch also adds tests/testscrolledwindow.c to display the effects
of this property.
It is just too annoying to have to implement these properties in
every scrollable. Instead, we now have ::min-content-height/width
in GtkScrolledWindow.
We also add GtkScrollablePolicy to determine how to size the
scrollable content.
The GtkScrollable interface provides "hadjustment" and "vadjustment"
properties that are used by GtkScrolledWindow. It replaces
the ::set_scroll_adjustment signal. The scrollable interface
also has ::min-display-width/height properties that can be
used to control the minimally visible part inside a scrolled window.
Remove the check for GTK_TREE_MODEL_LIST_ONLY and make the view
display only the first level of the tree, ignoring all insert, remove
etc. events on the model's branches. This enables generic application
code which always produces GtkTreeStores (also for flat lists) to
display grids of these flat trees.
gtk_icon_view_layout(), which can resize the bin window and thus
underlying surfaces, could be called from gtk_icon_view_draw(). So
we have to make sure that layouting is done before the draw handler is
called. We use the same construction as in tree view here, the layout
idle handler is installed with a higher priority than
GDK_PRIORITY_REDRAW and we wrap the call to gdk_window_process_updates()
in a new function that will flush the layout queue beforehand.
This mostly goes to keep consistency with the changes to GtkSizeRequest
in the last patch, as GtkCellSizeRequest requires GtkCellRenderer and
GtkCellRenderer implements GtkCellSizeRequest there's no use in keeping
them separate.
This patch renames the functions:
gtk_cell_size_request_get_request_mode()
=> gtk_cell_renderer_get_request_mode()
gtk_cell_size_request_get_width()
=> gtk_cell_renderer_get_preferred_width()
gtk_cell_size_request_get_height()
=> gtk_cell_renderer_get_preferred_height()
gtk_cell_size_request_get_size()
=> gtk_cell_renderer_get_preferred_size()
gtk_cell_size_request_get_width_for_height()
=> gtk_cell_renderer_get_preferred_width_for_height()
gtk_cell_size_request_get_height_for_width()
=> gtk_cell_renderer_get_preferred_height_for_width()
... and moves the corresponding vfuncs to GtkCellRenderer.
The patch also renames the implementations of these functions in cell
renderers to include the word "preferrred".
It doesn't make sense to keep them separate as GtkSizeRequest requires a
GtkWidget and GtkWidget implements GtkSizeRequest, so you can never have
one without the other.
It also makes the code a lot easier because no casts are required when
calling functions.
Also, the names would translate to gtk_widget_get_width() and people
agreed that this would be a too generic name, so a "preferred" was added
to the names.
So this patch moves the functions:
gtk_size_request_get_request_mode() => gtk_widget_get_request_mode()
gtk_size_request_get_width() => gtk_widget_get_preferred_width()
gtk_size_request_get_height() => gtk_widget_get_preferred_height()
gtk_size_request_get_size() => gtk_widget_get_preferred_size()
gtk_size_request_get_width_for_height() =>
gtk_widget_get_preferred_width_for_height()
gtk_size_request_get_height_for_width() =>
gtk_widget_get_preferred_height_for_width()
... and moves the corresponding vfuncs to the GtkWidgetClass.
The patch also renames the implementations of the vfuncs in widgets to
include the word "preferrred".
Fixed issues in my previous patch for bug 626939 removing GtkRequisition
cache: these widgets monitor the previous requested size and decide whether
to queue a resize when the content changes based on it's prior request.
The keysyms create a lot of potential namespace conflicts for
C, and are especially problematic for introspection, where we take
constants into the namespace, so GDK_Display conflicts with GdkDisplay.
For C application compatiblity, add gdkkeysyms-compat.h which uses
the old names.
Just one user in GTK+ continues to use gdkkeysyms-compat.h, which is
the gtkimcontextsimple.c, since porting that requires porting more
custom Perl code.
Since we have a new mechanism for requesting sizes: GtkSizeRequestIface;
it makes no sense to maintain this cache on the GtkWidget structure...
removing the requisition cache however does not break the old "size-request"
signal which is there for backwards compatability reasons.
In any case widget->requisition should not have been accessed,
gtk_widget_get_child_requisition() would have been the correct way
to consult the cache.
This commit also deprecates the newly added gtk_widget_get_requisition()
API and makes it fallback on gtk_size_request_get_size().
Rename the ::orientation property of GtkIconView to item-orientation,
which is both clearer and avoids the conflict with the orientation
property of GtkOrientable implementations.
Includes fixing all callers to use the cairo region API instead. This is
usually just replacing the function names, the only difference is
gdk_region_get_rectangles() being replaced by
cairo_region_num_rectangles() and cairo_region_get_rectangle() which
required a bit more work.
https://bugzilla.gnome.org/show_bug.cgi?id=613284
The old version wasn't introspectable as it didn't have a length
return parameter. Also, delete gtk_tree_path_get_indices_with_depth,
since it's no longer needed.
Use ::keynav-failed for arrow navigation in icon views, so that
it is possible to override error handling. Also add API to get the
row/col of an item. With this, it is possible to make arrow keynav
span adjacent icon views, which is desired in the new control-center
shell. testiconview-keynav demonstrates this.
In the early 2.14.x releases, GtkAdjustment was changed to enforce
that values are restricted to the range [lower, upper - page_size].
This has always been the documented behaviour, and the recommended
practice is to set page_size to 0 when using adjustments for simple
scalar values, like in a slider or spin button.
Due to the large number of applications that are affected by this
change, the behaviour has been reverted to the old behaviour in
2.14.3, with an explicit warning that this change will be
reintroduced in 2.90.
This reverts commit e6373738fc.
https://bugzilla.gnome.org/show_bug.cgi?id=619474
This commit was created using a script that searched for all docstrings
containing a parameter and the string 'or %NULL'.
Gdk backends and demos excluded as they are not part of a public API
https://bugzilla.gnome.org/show_bug.cgi?id=610474
Deprecate widget flag macros GTK_WIDGET_STATE, GTK_WIDGET_SAVED_STATE,
GTK_WIDGET_FLAGS, GTK_WIDGET_TOPLEVEL, GTK_WIDGET_NO_WINDOW and
GTK_WIDGET_COMPOSITE_CHILD.
Also deprecate the type macros GTK_WIDGET_TYPE, GTK_OBJECT_TYPE_NAME and
GTK_OBJECT_TYPE which have become redundant.
Instances of GTK_WIDGET_TOPLEVEL are replaced with gtk_widget_is_toplevel,
GTK_WIDGET_TYPE is replaced with G_OBJECT_TYPE, GTK_WIDGET_COMPOSITE_CHILD
is replaced with use of the "composite-child" property and uses of
GTK_WIDGET_NO_WINDOW are adjusted to use gtk_widget_get_has_window.
Uses of GTK_WIDGET_SAVED_STATE and GTK_WIDGET_FLAGS inside GtkWidget are
changed to direct flag usage.
Documentation is updated to refer to gtk_widget_set_has_window and
gtk_widget_get_has_window.
Gail and tests are updated as well.
Fixes: https://bugzilla.gnome.org/show_bug.cgi?id=69872
The Gtk-custom.c file in gir-repository contained a number of
introspection annotations. Merge those into the GTK source files.
Some documentation was moved from the tmpl/ files to accomodate
the addition of annotations.
Either g_type_register_static_simple (used by G_DEFINE_TYPE_EXTENDED)
and G_IMPLEMENT_INTERFACE use automatic variables for GTypeInfo and
GInterfaceInfo structs, while tutorials and source code often use
static variables. This commit consistently adopts the former method.
https://bugzilla.gnome.org/show_bug.cgi?id=600158
Run gtk_icon_view_layout() if necessary before attempting to paint the
icon view items during an expose event. This ensures all the items have
valid sizes, as some themes don't take kindly to negative dimensions.
* gtk/gtkiconview.c
(gtk_icon_view_item_accessible_image_set_image_description): Copy
the right string. Pointed out by Tommi Rantala
svn path=/trunk/; revision=22417
2008-12-23 Li Yuan <li.yuan@sun.com>
* gtk/gtkiconview.c: (gtk_icon_view_accessible_model_row_changed):
Bug #549251. No need to set name if there is no a11y item object.
svn path=/trunk/; revision=21926
2008-12-21 Yair Hershkovitz <yairhr@gmail.com>
Bug 565203: RTL locales: icons are misplaced when horizontal
gtkiconview is contained in a gtkscrolledwindow.
* gtk/gtkiconview.c (gtk_icon_view_layout_single_row):
Fix horizontal icon positions when in RTL locale.
svn path=/trunk/; revision=21918
* gtk/gtkiconview.c (gtk_icon_view_accessible_model_row_changed):
Handle separate append/set for rows. Patch by Li Yuan
svn path=/trunk/; revision=21884
2008-12-11 Sven Herzberg <sven@imendio.com>
Document the "set-scroll-adjustments" signal
Reviewed by Kristian Rietveld.
* gtk/gtkiconview.c,
* gtk/gtklayout.c,
* gtk/gtktextview.c,
* gtk/gtktreeview.c,
* gtk/gtkviewport.c: added proper documentation for the signal
svn path=/trunk/; revision=21871
2008-09-27 Denis Washington <denisw@svn.gnome.org>
* gtk/gtkiconview.c: only draw keyboard focus when keyboard navigation
is used, like GtkTreeView. (Bug #553575)
svn path=/trunk/; revision=21534
2008-09-24 Denis Washington <denisw@svn.gnome.org>
* gtk/gtkiconview.c: draw focus as a rectangle around the
complete item, not just the text. (Bug #38254)
svn path=/trunk/; revision=21506
2008-09-03 Matthias Clasen <mclasen@redhat.com>
Bug 550528 - IconView DND interface does not work if only used as
source
* gtk/gtkiconview.c: Make source-only DND work.
Found by Alex Simon
svn path=/trunk/; revision=21270
2008-08-12 Michael Natterer <mitch@imendio.com>
* gtk/*.c: consistently chain up using
GTK_FOO_CLASS(parent_class)->bar(instance) instead of
(*GTK_FOO_CLASS(parent_class))->bar(instance).
svn path=/trunk/; revision=21085
2008-08-06 Michael Natterer <mitch@imendio.com>
* gtk/gtkcombobox.c
* gtk/gtkiconview.c
* gtk/gtkrange.c
* gtk/gtkscrolledwindow.c
* gtk/gtktreeview.c: remove CLAMPing from values passed to
gtk_adjustment_set_value() since it does it right now.
svn path=/trunk/; revision=21021
