Use the set_minimized method of the xdg_toplevel
interface to implement minimization as well as possible.
It is not possible, since there is no corresponding
state that we could use to update our surface state,
but in practice, it works well enough.
Fixes: #2688
This commit fix the warning:
../gdk/wayland/gdkdisplay-wayland.c:1079: Warning: GdkWayland: gdk_wayland_display_set_cursor_theme: unknown parameter 'name' in documentation comment, should be 'theme'
Currently GTK can be built with G_ENABLE_DEBUG which enables various debug code and parsing
of those env vars, or without, which instead of parsing them prints a warning if they are set.
While building with G_ENABLE_DEBUG isn't strictly needed it's the only way to make GTK_DEBUG=interactive work,
which is a nice thing to have always.
This enables parsing of those env vars in any case and allows specific values being marked as also
available when not built with G_ENABLE_DEBUG (interactive for example). If not built with G_ENABLE_DEBUG
then all unavailable values will be marked as such in the help output and a note is added that
GTK needs to be built with G_ENABLE_DEBUG to use them, which should help discoverability.
In gdkdevice-win32.c we are interested in knowing which window
receives mouse input at a specific location.
Only WindowFromPoint is the right API for the task, other API's
(such as (Real)ChildWindowFromPoint(Ex)) have shortcomings because
they are really designed for other purposes. For example, only
WindowFromPoint is able to look through transparent layered windows.
So even if we want to find a direct child we have to use
WindowFromPoint and then walk up the hierarchy.
Fixes: #370, #417
See: !2800
Once we figure out what is going on with textures, changes are we'll be
able to let this stay a zero rect. But that is still a bit up in the air right now.
When we close grabbing popups due to an outside
click, check at each level if the click is still
outside. This makes closing the nested popover
menu in the popover on page 3 of widget-factory
work as expected, when you click the menubutton
again.
When an event happens on a non-grabbing popup that hangs off
a grabbing popup, don't trigger the autohide. This makes touch
text handles work inside the popover on page 3 of widget-factory.
We can just call gdk_surface_invalidate_rect here
like we do elsewhere in gdk, and I'm a bit uncertain
about the current code that adds an empty update
region.
The Cairo implementation for the Macos backend uses a toplevel
window with full transparency and a series of NSView to create opaque
regions. This improves compositor performance because it allows the
display server to avoid costly blends.
However, we want to ensure we clip better when exposing the
transparent region so that we only expose the shadows/corners as
necessary.
This typedef was not used in any public APIs, and is
only used in the MacOS backend. It is not worth preserving
as public API, move it to the only user.
This implements the basics for a GdkGLContext on macOS. Currently, rendering
only is fully working for the GskCairoRenderer case where we read back pixels
into a cairo surface for rendering. More work on synchronization is required for
the GL on GskGLRenderer case.
When we attempt to render a surface itself with GL, the context will ensure that
the new GdkMacosGLView is placed within the NSWindow. In other cases, we
use a dummy NSView and NSWindow for backing the NSOpenGLContext to
ensure that we can get accelerated drawing.
This gets GtkGLArea working when running with GSK_RENDERER=cairo.
This helps a situation where the window contents has not changed
in time for a drawing. Setting the texture gravity helps that side or
corner to be less jittery while moving.
Ideally, we can get to a point where we are synchronized and keeping
up with drawing fast enough to not need this. That may require some
work to drive frame clocks from drawRect: though.
The current code was marking queued events as flushed,
but left them in the queue. That doesn't make sense to
me - we should deliver all events we have before we
reach the paint phase of the frame cycle.
GLDEBUGPROC callback is defined with APIENTRY which is a windows
specific calling convention. That macro expands to nothing when building
on other platforms.
Fixes: #3268.
Call SetCapture() explcitly for the (new) modal window so that we make the
modal window respond to mouse input, and also call SetCapture() to the parent
of the transient window that we are destroying so that mouse input capture is
returned to the parent window.
This attempts to fix the following:
* Upon creating a new modal window, the new modal window does not receive
pointer input unless one switches to another program and back
* Upon closing a transient window, the parent window that activated the
transient window does not receive pointer input unless one switches to
another and back
This reverts commit fc2008f2.
Turns out, we *don't* have code to maintain Z-order. Restacking
code is not doint that, it just enforces a few weird Z-order-related
behaviours.
Make sure that we get the state of the modal window properly, and send out the
corresponding notification signals.
This will ensure that we do not try to activate windows that should have become
inactivated due to it opening modal windows and render the program unresponsive
because we are not activating the correct window that is due to receive user
input.
The 'has_uncommitted_ack_configure' state was added to make sure we're
responding to 'xdg_surface.configure' events with
'xdg_surface.ack_configure' requests, as is necessary according to spec.
What we didn't do was to clear this state when hiding, meaning that if
we hid the surface after a configure event, but before the frame
finished and we processed the 'has_uncommitted_ack_configure', we'd try
to acknowledge the surface configuration after having destroyed the
surface.
Closes: #3262
This was incorrectly reporting the toplevel surface instead of the
popup surface that was placed above it. This fixes event delivery
to popups for selecting menu items and more.
This fix is correct and fixes:
1) GL textures being upside down in the inspector. They are getting
downloaded because they've been created in a different GL context
2) GL textures being upside down in the cairo renderer (same reason)
However, it breaks the testsuite. We do the flipping via the projection
matrix, but most of the shaders don't care about that.
The GdkWayland API takes generic GDK types and performs a run time
check, which means we need to properly annotate the actual expected
type in order to have methods recognised as such.
When querying a device, we need to ensure we are providing coordinates
in the coordinate system of the surface. Further, we need to actually
provide the button and keyboard state.
This fixes some issues related to dragging scrollbars and selecting list
box rows more reliably.
The GdkWayland API takes generic GDK types and performs a run time
check, which means we need to properly annotate the actual expected
type in order to have methods recognised as such.
No users of gdk_display_peek_event, gdk_display_has_pending
_gdk_display_event_data_copy or _gdk_display_event_data_free,
so drop all of these, and related vfuncs.
Go back to installing our debug message callback
unconditionally if G_ENABLE_CONSISTENCY_CHECKS is
defined, and allow opting into it using GDK_DEBUG=gl-debug
otherwise.
Prevents GDK Popups from stealing focus from the parent window when
using Server Side Decorations on win32.
It uses `ShowWindow` and the `SW_SHOWNOACTIVATE` flag.
When using the saved size because the compositor
told us to, we were forgetting to readd the margins.
The visible symptom of this was the window getting
smaller every time we went to tiled state and back.
Don't remember the surface size when we are in tiled
state either. This matches the 'fixed_size' condition
in gdk_wayland_surface_configure_toplevel.
This change fixes an issue where moving a window first
to tiled, then to maximized state and back would lead
to the unmaximized window having the tiled dimensions.
We should not emit configure events before we are realized - size
changes at this point are not relevant.
This gets rid of a mysterious emission of GdkSurface::size-changed
with a size of 52x52, that is happening when GtkWindow sets the
shadow_width before the window is mapped.
Always install the debug message callback when we can
and GDK_DEBUG=gl-debug is specified. Previously, we
were only installing the callback when the build was
a non-optimized debug build.
If all your callers already initialize the array element as needed,
then we don't need to memset it to zero first.
This is pretty useful for the snapshot state stack, because due
to the per-node-type data area the elements on the stack are
quite large, but often a lot of it is not used.
This inlines the splice and reserver GdkArray calls. These are
typically only called from the gdk_array_(append/set_size) functions
anyway, and inlining the caller means we can constant propagate the
constant arguments in those calls. Its hard to get exact numbers, but
in fishbowl i noticed a significant decrease in the time spent in
the array code when pushing and poping states.
There is nothing really special about this code, its just a helper for
uploading pixel data to opengl, and we're not really in the business
of doing opengl-specific helper functions.
Do custom uploads rather than using gdk_cairo_surface_upload_to_gl(),
because this way we avoids a roundtrip (memcpy and possibly conversion)
to the cairo image surface format.
The gdk-pixbuf non-rgba format can be directly uploaded without
conversion.
The rgba format needs alpha premultiplication though, which is not
supported by GL during upload.
GLES doesn't support the GL_BGRA + GL_UNSIGNED_INT_24_8 hack that
we use on desktop OpenGL to upload textures directly in the cairo
pixel format. This adds the required conversions to all the places
that currently need it.
We also add a data_format to the internal gdk_gl_context_upload_texture()
function to make it clearer what the format are. Currently it is always
the cairo image surface format, but eventually we want to support other
formats so that we can avoid some of the unnecessary conversions we do.
Also, the current gdk_gl_context_upload_texture() code always converts
to a cairo format and uploads that like we did before. Later commits
will allow this to use other upload formats that gl supports to avoid
conversions.
This is the default OpenGL format, and in fact the only pixel format
that GLES supports uploading as. Actually, the premultiplied part is
really just about how we use the textures, but all textures in GTK
are premultiplied.
Most of the surface api we have in the Wayland backend
only makes sense for toplevels, so reshuffle things to
take a GdkToplevel instead of a GdkSurface.
Update all callers and the docs.
We must wl_surface.commit after xdg_surface.ack_configure to make it
have an effect. We failed to do so when a configure event didn't result
in new updates, so make sure we fall back on an simple
wl_surface.commit if there was no new actual frame painted.
Closes: #2910
In order to make the cairo renderer/context behave more similar to how
the OpenGL and Vulkan renderer/context behaves, request a frame callback
and commit in the end frame vfunc.
This means the end frame vfunc in cairo does
* attach buffer
* request frame callback
* sync surface state
* commit
Where as e.g. the OpenGL version of the same flow does
* attach buffer
* request frame callback
* sync surface state
* eglSwapBuffers()
where eglSwapBuffers() indirectly calls wl_surface_commit().
Since the changes to GDK to use surface subtypes, CSD windows were
broken because we did not set the window styles properly. Fix this by
first acquiring whether decorations are used by the GtkWindow, and based
on that result we set the decorations that we want to use accordingly
and so apply them.
Thanks to Matt Jakeman for investigating into the issue and providing
pointers to a proposed fix.
Fixes issue #3157, besides the part where window sizes are not correct
since that is likely caused a separate issue.
Don't pass 0x0 as size when calling gdk_surface_new().
The Wayland backend takes us literally, and we end
up with a surface that (temporarily) has these
dimensions, confusing other APIs that we pass the
size to, such as Vulkan.
We end up with a surface that has size 0x0 at the
time we create the Vulkan context, and that is a
size that Vulkan doesn't like, so ensure we request
at least 1x1.
Fixes: #3147
When using the gdk_display_close(), the handle to the Wayland compositor was not released. This could cause the consumption of all available handles, preventing other processes from accessing the display.
Fixing this by calling wl_display_disconnect() when releasing the GdkWaylandDisplay object.
Signed-off-by: Julien Ropé <jrope@redhat.com>
We want to ensure that the pointer position is reflected
when widget geometry changes, so add a function that tells
GDK "please create a motion event at the current position
on this surface, if one doesn't happen already".
Handle both these settings, and the older settings-daemon ones for
backwards compatibility. The keys are already checked for existence
in the schema, so it will just use the existing ones.
Prefer this location, but also look for the old location in
settings-daemon for backwards compatibility. This applies to both
direct settings lookups and via the settings portal.
If some node is fully outside the clip region we don't send it to the daemon.
This helps a lot in how much data we send for scrolling viewports.
However, sending partial trees makes node reuse a bit more tricky. We
can't save for reuse any node that could possibly clip different depending on
the clip region, as that could be different next frame. So, unless the
node is fully contained in the current clip (and we thus know it is not
parial) we don't allow reusing that next frame.
This fixes#3086
A year ago, we make this function not return the child
surface anymore. But the information whether the device
is actually over the surface is still useful, and we
should not loose it.
If alpha is 255, we use rgb() instead of rgba(), not if alpha is 0.
This makes the title bar gradient go from fully transparent to blue
rather than black to blue..
When we send an anchor rectangle with a width or
height of 0, mutter reponds with "Invalid anchor
rectangle size". So, don't do that.
This was seen as sudden disappearance of gtk4-demo
when you click the fishbowl benchmark all the way
through to the menubuttons.
Fixes: #3027
We might break the loop early, e.g. if we're unmapped before the round
trip finishes, and to avoid the callback to write to invalid stack
memory, destroy the callback so it won't be invoked.
Fixes: #3026
GTK will not up front know how to correctly calculate a size, since it
will not be able to reliably predict the constraints that may exist
where it will be mapped.
Thus, to handle this, calculate the size of the toplevel by having GDK
emitting a signal called 'compute-size' that will contain information
needed for computing a toplevel window size.
This signal may be emitted at any time, e.g. during
gdk_toplevel_present(), or spontaneously if constraints change.
This also drops the max size from the toplevel layout, while moving the
min size from the toplevel layout struct to the struct passed via the
signal,
This needs changes to a test case where we make sure we process
GDK_CONFIGURE etc, which means we also needs to show the window and
process all pending events in the test-focus-chain test case.
gdk_gl_context_has_framebuffer_blit() and gdk_gl_context_has_frame_terminator()
were only used by by GDK/Win32, and they do not provide performance advantages
in GTK master, so clean up the code a bit by dropping them.
Use gdk_surface_get_geometry() to get the correct x and y coordinates of the
window that we are resizing, so that the window does not reposition itself
automatically at the top-left corner at resizing as we to used hard-code the x
and y coordinates to 0.
By doing so, we ensure that resizes of windows will work on Vulkan renderer, by
first calling gdk_win32_surface_handle_queued_move_resize() before we proceed
as usual
Use the shared function that was added in the previous commit, to simplify
things.
Also make gdk_win32_surface_get_queued_window_rect() and
gdk_win32_surface_apply_queued_move_resize() back into static functions, since
they are now used only by the code in gdksurface-win32.c
Since we need to deal with queued moves and resizes in the Cairo, GL and Vulkan
draw contexts, and the logic involved in all three of these are largely
similar, add a function gdk_win32_surface_handle_queued_move_resize() that will
handle this, which will be shared between these three types of draw contexts.
Move gdk_win32_surface_get_queued_window_rect() and
gdk_win32_surface_apply_queued_move_resize() to gdksurface-win32.c, since these
functions are not only used for Cairo draw contexts, but is also used for GL
draw contexts, and will be used for Vulkan draw contexts.
Don't get the default display when we compute the Aerosnap region, but instead
get it from the underlying GdkSurface that we are using for the computation.
Also, don't unref the monitors that we obtain from the display in the wrong
place, which was why we had crashes whenever we triggered AeroSnap code (and we
are actually not supposed to do that as they are owned by the GdkDisplay that
is owned by the GdkSurface we are using), and this will eliminate lots of
criticals that are spewed as a result.
This check used to read if (grab || device_type != GDK_DEVICE_TYPE_PHYSICAL),
the grab check was only reserved to physical devices, which the current
pointer device definitely doesn't act like. So the condition was "fixed" the
wrong way around, and the latter check is now moot, so the condition should
really go away. We always want to check the new toplevel under the pointer
here.
Fixes: https://gitlab.gnome.org/GNOME/gtk/-/issues/2970
This allows us to use DPI_AWARENESS_CONTEXT_PER_MONITOR_AWARE_V2 for the
DPI awareness mode, which will help us to better support use cases with
multiple monitors. This is actualy a more advaned version of the
current PROCESS_PER_MONITOR_DPI_AWARE via using SetProcessDpiAwareness().
Note that this is not enabled by default, but also enabled via using
GDK_WIN32_PER_MONITOR_HIDPI, as in the PROCESS_PER_MONITOR_DPI_AWARE
case.
Note also, that appliation compatibility settings and DPI-awareness
manifests takes precedence over this API call, as before.
Like the other backends, we ought to create our WGL/EGL GL contexts like
the following:
"Create a global GL context that connects all GL contexts on a display
and lets us share textures between them."
If GLES support is enabled on Windows, force GLES mode if we are running
on a ARM64 version of Windows (i.e. Windows 10 for ARM).
This is required as ARM64 versions of Windows only provide a software
implementation of OpenGL 1.1/1.2, which is not enough for our purposes.
Thus, we could make instead use the GLES support provided via Google's
libANGLE (which emulates OpenGL/ES 3 with Direct3D 9/11), so that we
can run GtkGLArea programs under OpenGL/ES in ARM64 versions of Windows.
Note that eventually we could update the libepoxy build files for Windows
to not check nor enable WGL when building for ARM64 Windows, as the WGL
items do not work, although they do build.
We need to use GL_BGRA instead of GL_RGBA when doing glReadPixels() on
EGL on Windows (ANGLE) so that the red and blue bits won't be displayed
inverted.
Also fix the logic where we determine whether to bit blit or redraw
everything.
This is for adding a EGL-based renderer which is done via the ANGLE
project, which translate EGL calls to Direct3D 9/11. This is done as a
possible solution to issue #105, especially for cases where the needed
full GL extensions to map OpenGL to Direct3D is unavailable or
unreliable, or when the OpenGL implementation from the graphics drivers
are problematic.
To enable this, do the following:
-Build ANGLE and ensure the ANGLE libEGL.dll and libGLESv2.dll are
available. A sufficiently-recent ANGLE is needed for things to
work correctly--note that the copy of ANGLE that is included in
qtbase-5.10.1 is sufficient. ANGLE is licensed under a BSD 3-clause
license.
-Build libepoxy on Windows with EGL support enabled.
-Currently, prior to running GTK+ programs, the GDK_DEBUG envvar needs
to be set with gl-gles as at least one of the flags.
Known issues:
-Only OpenGL ES 3 is supported, ANGLE's ES 2 does not support the needed
extensions, notably GL_OES_vertex_array_object, but its ES 3 support is
sufficient.
-There is no autodetection or fallback mechanism to enable using
EGL/Angle automatically yet. There are no plans to do this in this
commit.
...EGL support needs to be explicitly enabled during the build of
libepoxy on Windows as it is not enabled by default on Windows.
With this, we can add an EGL renderer for Windows that make use of
Google's libANGLE, which is a library that translates OpenGL/ES calls
to Direct3D 9/11, which will provide better hardware compatibility
on Windows and would act as one of the foundations to resolve issue #105.
It's not a portable API, so remove it. The corresponding backend
specific functions are still available, if they were implemented, e.g.
gdk_macos_monitor_get_workarea() and gdk_x11_monitor_get_workarea().
Make GdkEvents hold a single GdkDevice. This device is closer to
the logical device conceptually, although it must be sufficient for
device checks (i.e. GdkInputSource), which makes it similar to the
physical devices.
Make the logical devices have a more accurate GdkInputSource where
needed, and conflate the event devices altogether.
Besides the implicit x/y assumptions, devices don't have axes. Those
are actually provided by the GdkDeviceTool driving the device, and
different tools may have different axes.
It does not make sense to offer this API that can change beneath
someone's feet, we now have gdk_device_tool_get_axes() which is static
to the tool.
Looking at the xf86-input-wacom driver code, this is not even a thing
anymore. Drop this device type, in modern days there's
GDK_DEVICE_TOOL_TYPE_MOUSE for this.
When converting DisplayLink frame presentation times, we need to take into
account the arch-specific types. This tracks changes in GNOME/GLib!1566 so
that precision is not lost.
This is fairly substantial rewrite of the GDK backend for quartz and
renamed to macOS to allow for a greenfield implementation.
Many things have come across from the quartz implementation fairly
intact such as the eventloop integration design and discovery of
event windows from the NSEvent.
However much has been changed to fit in with the new GDK design and
how removal of child GdkWindow have been completely eliminated.
Furthermore, the new GdkPopup allows for regular NSWindow to be used
to provide popovers unlike the previous implementation.
The object design more closely follows the ideal for a GDK backend.
Views have been broken out into subclasses so that we can support
multiple GSK renderer paths such as GL and Cairo (and Metal in the
future). However mixed mode GL and Cairo will not be supported. Currently
only the Cairo renderer has been implemented.
A new frame clock implementation using CVDisplayLink provides more
accurate information about when to draw drawing the next frame. Some
testing will need to be done here to understand the power implications
of this.
This implementation has also gained edge snapping for CSD windows. Some
work was also done to ensure that CSD windows have opaque regions
registered with the display server.
** This is still very much a work-in-progress **
Some outstanding work that needs to be done:
- Finish a GL context for macOS and alternate NSView for GL rendering
(possibly using speciailized CALayer for OpenGL).
- Input rework to ensure that we don't loose remapping of keys that was
dropped from GDK during GTK 4 development.
- Make sure input methods continue to work.
- Drag-n-Drop is still very much a work in progress
- High resolution input scrolling needs various work in GDK to land
first before we can plumb that to NSEvent.
- gtk/ has a number of things based on GDK_WINDOWING_QUARTZ that need
to be updated to use the macOS backend.
But this is good enough to start playing with and breaking things which
is what I'd like to see.
This was preventing any sort of building on macOS, even though the quartz
backend is currently non-functional. Fixing this is a pre-requisite to
getting a new macOS backend compiling.
Run the gdkkeysyms-update.pl script to pick up several
new keysyms:
GDK_dead_lowline
GDK_dead_aboveverticalline
GDK_dead_belowverticalline
GDK_dead_longsolidusoverlay
GDK_Keyboard
GDK_WWAN
GDK_RFKill
GDK_AudioPreset
* GDK_ARRAY_BY_VALUE
#define this to get GArray-like behavior
* gdk_array_splice (v, 0, 0, NULL, 25)
Adding items but passing NULL as the items will zero() them.
* gdk_array_set_size()
A nicer way to call gdk_array_splice()
* constify getters
This is a scary idea where you #define a bunch of preprocessor values
and then #include "gdkarrayimpl.c" and end up with a dynamic array for
that data type.
See https://en.wikipedia.org/wiki/X_Macro for what's going on.
What are the advantages over using GArray or GPtrArray?
* It's typesafe
Because it works like C++ templates, we can use the actual type of
the object instead of having to use gpointer.
* It's one less indirection
instead of 2 indirections via self->array->data, this array is
embedded, so self->array is the actual data, and just one indirection
away. This is pretty irrelevant in general, but can be very noticable
in tight loops.
* It's all inline
Because the whole API is defined as static inline functions, the
compiler has full access to everything and can (and does) optimize
out unnecessary calls, thereby speeding up some operations quite
significantly, when full optimizations are enabled.
* It has more features
In particular preallocation allows for avoiding malloc() calls, which
can again speed up tight loops a lot.
But there's also splice(), which is very useful when used with
listmodels.
