Tests that overdrawing of content inside an opacity node happens before
the opacity is applied.
This is broken in the GL renderer and causes the opacity.ui reftest to
fail.
This also switches the rendering code from using gsk_render_node_draw()
to gsk_renderer_render_texture().
Some tests are broken with the GL renderer, so this patch forces the
Cairo renderer until they get fixed.
The test used to test that GtkBox ordered it's children left-to-right in
CSS, no matter the text direction or pack-type.
But there is neither a pack-type anymore nor does GTK4 do that.
So that test has been broken for yers, it just didn't render anything
wrong.
This happens in the real world when using the inspector to look at a
node recording of a GStreamer video while the video is still playing.
GStreamer will use the GL context in a different thread while we are
busy trying to download it.
A test is included.
Use a GL renderer to upload textures (and then optionally download them
via release() again). This way, we can test that the GL renderer
properly uploads textures to the right formats (not losing information
for HDR for example) and downloads them again.
If the alpha channel is zero, it doesn't matter what the values of the
red, green and blue channels are: the pixel is still fully transparent.
On most architectures, fully transparent pixels end up all-zeroes
(fully transparent black), matching what's in the reference PNG file;
but on mips*el the blend-difference and blend-normal tests get all-ones
(fully transparent white) and a test failure.
Resolves: https://gitlab.gnome.org/GNOME/gtk/-/issues/4227
Signed-off-by: Simon McVittie <smcv@debian.org>
This adds support for sequences like <Compose>,G,u -> capital G with
breve. Previously, only a capital U was accepted for E, G, I and O
(but a lower-case u was accepted for A and U for some reason).
Signed-off-by: Simon McVittie <smcv@debian.org>
We can use the new binding helpers to make this
a little less bothersome. That way, it will need
tweaks less often (only when new fundamental types
are introduced).
Update all the places where we switch over
PangoAttrType to handle PANGO_ATTR_TEXT_TRANSFORM,
and do nothing for now - text-transform support
will land in 4.6.
Our compose table format is still limited to 16bit
values for keysyms, but what we see in key events
can be 32bit values, and we treat them as such now.
Fixes: #4149
Remove the limitation on the number of dead keys
that we match, and allow the result be be multiple
characters.
Regenerate the builtin sequences, since this changes
what dead key sequences we can reproduce algorithmically.
Update tests to match.
Fixes: #10
Make gtk_check_algorithmically take a GString
for the result. This is in preparation for allowing
multi-character results here, in the future.
Update all callers.
Set all settings to their default values, so we
are less dependent on the environment to be set
up just right. In particular, this fixes animations
being disabled when we happen to run in a vm.
Apply heuristics to avoid breaking users existing configurations
with the change to not always add the default sequences.
If we find a cache that was generated before 4.4, and the Compose
file does not have an include, and doesn't contain so many sequences
that it is probably a copy of the system one, we take steps to keep
things working, and thell the user about it.
All tables use the compact format now, and we generate
caches in that format too. Bump the cache version to 3
for this.
Replace the python script for generating the builtin table
by a small C program using the same code to generate the data
for the builtin table. This drops the restriction on only
generating a single character in the builtin sequences.
This lets us naturally replace matching sequences
while parsing. That means that the semantics are now
"last one wins" if the parser sees multiple entries
for the same sequence.
Add a testcase that checks the new replacement semantics.
Keep the list of composetables private to GtkIMContextSimple,
and just have an api that creates new GtkComposeTables, either
from a file or from data.
Update tests to use the new api.
We hardcoded the typelib directory for only an arch (and a distro),
while we can just get it from gobject-introspection pkg config if tests
are enabled.
This was comparing the included image-missing icon
with the one in the current icontheme on the test
system. Works fine as long as we don't change
the icons (which we just did). To avoid this, set
the icontheme to hicolor for this test, which does
not have the image-missing icon, so we end up getting
the builtin icon for both ui files.
If the session bus address is unset, GLib will
helpfully try to autolaunch a bus, which will
fail and timeout. If we set an empty address,
it gives up early.
Arrange things so that non-child parameters
are always printed before the children. This
greatly helps with readability, which really
suffers when there's hundreds of lines of indented
children between the node start and its parameters.
Update all affected tests.
This is a pet peeve of mine: When we call
g_test_init() before handling --generate,
the random seed spew pollutes the output.
Highly annoying. I've fixes many test binaries
over the years, but more keep popping up.
Compare clipped repeat nodes. Must skip cairo here
since it blurred the child by scaling after rendering.
Also skip the gl renderer, since it hasn't been fixed
for this yet. ngl passes this test.
It seems to make assumptions about text positioning that
are not holding with subpixel positioning. I'm not 100%
sure how that leads to exactly the artifacts that are seen
here, but I am just disabling the test until that is fully
understood.
It makes assumptions about text positioning that are
not holding with subpixel positioning. There is no
guarantee that the next word in a multi-word text
starts on an even pixel boundary, as it does when
you break the text into multiple, separately rendered
blocks.
We were not handling mnemonics vs markup right
in all cases. Rewrite the _-stripping code to
do it during the link parsing, instead of as
a separate function. This avoids the issue of
stripping _ from attribute names in markup.
Add tests.
Fixes: 3706
The primary goal here was to cleanup the current GL renderer to make
maintenance easier going forward. Furthermore, it tracks state to allow
us to implement more advanced renderer features going forward.
Reordering
This renderer will reorder batches by render target to reduce the number
of times render targets are changed.
In the future, we could also reorder by program within the render target
if we can determine that vertices do not overlap.
Uniform Snapshots
To allow for reordering of batches all uniforms need to be tracked for
the programs. This allows us to create the full uniform state when the
batch has been moved into a new position.
Some care was taken as it can be performance sensitive.
Attachment Snapshots
Similar to uniform snapshots, we need to know all of the texture
attachments so that we can rebind them when necessary.
Render Jobs
To help isolate the process of creating GL commands from the renderer
abstraction a render job abstraction was added. This could be extended
in the future if we decided to do tiling.
Command Queue
Render jobs create batches using the command queue. The command queue
will snapshot uniform and attachment state so that it can reorder
batches right before executing them.
Currently, the only reordering done is to ensure that we only visit
each render target once. We could extend this by tracking vertices,
attachments, and others.
This code currently uses an inline array helper to reduce overhead
from GArray which was showing up on profiles. It could be changed to
use GdkArray without too much work, but had roughly double the
instructions. Cycle counts have not yet been determined.
GLSL Programs
This was simplified to use XMACROS so that we can just extend one file
(gskglprograms.defs) instead of multiple places. The programs are added
as fields in the driver for easy access.
Driver
The driver manages textures, render targets, access to atlases,
programs, and more. There is one driver per display, by using the
shared GL context.
Some work could be done here to batch uploads so that we make fewer
calls to upload when sending icon theme data to the GPU. We'd need
to keep a copy of the atlas data for such purposes.
This is the only non-whitespace difference between the copies in
testsuite/reftests/ and testsuite/gsk/.
Signed-off-by: Simon McVittie <smcv@debian.org>
When we are rendering a texture node to an offscreen,
and we have a clip, we must force the offscreen rendering.
Otherwise, the code will notice: Hey, it already is a texture
node, so no need to render it to a texture again. But when
clipping is involved, that is exactly what we want to do.
Testcase included.
Fixes: #3651
This function was not doing the right thing.
Once we are doing the right thing and not compare
shadows as unequal, some reftests that inhibit
snapshots for a few frames now hang forever, since
we are no more redrawing unnecessarily. Fix that
with an explicit queue_draw.
Make it possible for gtk_compose_table_check to return
a string instead of just a single Unicode character.
Currently, we only ever return strings holding a single
character, still.
Visual Studio does not come with unistd.h, but Windows do have write() and
close() in io.h, so include io.h instead of unistd.h on Windows.
For MinGW, unistd.h in turn includes io.h.
This property needs to be treated as flags, not as
enum, since it should be possible to specify more
than one value, e.g.
text-decoration-line: underline overline;
Tests included.
Fixes: #3621
Unify the many copies of diff_with_file in one source
file, and patch it to detect diff at runtime and fall
back to a simple strcmp if we don't have it. Make all
tests use this new testutils.c, and stop requiring
diff for building the tests.
This should let us allow to build on Windows with the
default value for -Dbuild-tests.
If set to TRUE, does not call the free func for the removed items.
This can be used to move items between arrays without having to do the
refcounting dance.
It tested that a widget shown after the window was mapped deals with
window resizing appropriately when doing the follow-up allocation. Now,
doing this only allocates both at the same time, as allocation happens
during the frame dispatch.
To do the equivalent now, one would have to write code that shows the
label after the first frame was drawn, and that's not possible via a
reftest, so lets remove it.
Using GtkCssSection in public headers here may be
ok from the C perspective, since it all ends up in
the same library anyway. But it causes circular
dependency problems for our gir files that are still
split by namespace.
To avoid this problem, copy the GtkCssLocation struct
struct as GskParseLocation, and pass take two of them
instead of a GtkCssSection in the error callback.
Update all users.
Fixes: #2454
gtk-builder-tool simplify --3to4 now produces a
<requires lib="gtk" version="4.0"/>.
Adapt for that, and also add some tests that check that we
actually verify the requires, and accept 3.99 and 4.0, but
not 5.x.
Using GList is a bit lame, and makes the API more complicated to use
than necessary in the common case.
The only real use case for a GList is gtk_widget_add_mnemonic_label(),
and for that we can use the GValue-based API instead.
Fixes: #3343
Use a single environment variable for everything:
- select the ATContext implementation
- select the test ATContext
- disable ATContext entirely
We use the same pattern as GSK_RENDERER, GTK_DEBUG, etc.
The documentation needs to be updated to include the environment
variable.
The tests in subdirectories of testsuite/css were
using an environment defined in the parent directory,
causing them to not find their test data. Give each
test directory its own environment.
These tests are a bit fragile because the initial focus
that is taken depends on what ends up in the center of
the window, horizontally or vertically, which depends
on things like fonts, or theme spacing.
This commit makes some tweaks to push things in the
widget-factory example around far enough to make the
tests work again.
We should figure out a way to make this more robust.
Since we need to check at run time what kind of AT context to use, we
need a hook into the whole GDK backend machinery. The display connection
seems to be the best choice, in this case, as it allows us to determine
whether we're running on an X11 or Wayland system, and thus whether we
should create a GtkAtSpiContext.
This requires some surgery to fix the GtkATContext creation function, in
order to include a GdkDisplay instance.
This is rarely what you want, so lets turn it off
by default.
Update the one place in our demos where we want to
draw a value, add support for this to gtk-builder-tool,
add a test and mention this change in the migration
guide.
Make these functions return FALSE if they did not
return the exact position that was requested.
Adapt tests.
Based on a patch by Sebastien Wilmet
Fixes: #506
Make sure that every object property in GTK has accessors for getting
its value (if the property is readable) or setting it (if it is
writable).
Since we are still missing accessors, the test is allowed to
fail for now. Sadly, mesons xfail support is busted, so we just
disable the test entirely :(
Based on initial work by Benjamin Otte.
Related: #2440
When encoding big blobs of data in base64, insert newlines.
Base64 allows it, CSS allows it, so not need to make GtkTextView
struggle with multi-megabyte lines.
Update nodeparser tests to reflect this change.
GtkBuildable's get_name()/set_name() methods may shadow
GtkWidget's methods. Avoid that by renaming the API to
get_buildable_id()/set_buildable_id(), which also reflects
the name of the XML attribute the API refers to.
https://gitlab.gnome.org/GNOME/gtk/-/issues/3191
This is the default OpenGL format, and in fact the only pixel format
that GLES supports uploading as. Actually, the premultiplied part is
really just about how we use the textures, but all textures in GTK
are premultiplied.
