When sending render nodes from the client to the daemon we add an id,
and whenever we're about to re-send the entire tree node we instead
send the old id. We track all the nodes for the previous frame
of the surface this way.
Having the id on the daemon side will allow us do to much better deltas.
We want to delay some rendering, and to make that safe we need to correctly
refcount the use of blob uris for the textures so that we don't unref
it while something is scheduled to use it.
ImmIsIME() doesn't work (always returns TRUE) since Vista.
Use ITfActiveLanguageProfileNotifySink to detect TSF changes,
which are equal to IME changes for us.
Also make sure that IMMultiContext re-loads the IM when keyboard layout
changes, otherwise there's a subtle bug that could happen:
* Run GTK application with non-IME layout (US, for example)
* Focus on an editable widget (GtkEntry, for example)
* IM Context is initialized to use the simple IM
* Switch to an IME layout (such as Korean)
* Start typing
* Since IME module is not loaded yet, keypresses are handled
by a default MS IME handler
* Once IME commits a character, GDK will get a WM_KEYDOWN,
which will trigger a GdkKeyEvent, which will be handled by
an event filter in IM Context, which will finally re-evaluate
its status and load IME, and only after that GTK will get
to handle IME by itself - but by that point input would
already be broken.
To avoid this we can emit a dummy event (with Void keyval),
which will cause IM Context to load the appropriate module
immediately.
This is named gdkconstructor.h to avoid any possible conflicts. This fixes
the current usages of G_HAS_CONSTRUCTORS, as that header is not installed
by glib.
Change gdk_surface_get/set_user_data to private
API and rename them to get/set_widget.
Also remove an unused associated function.
The last two places where the surface API is used
are in gtkroot.c and gtkwidget.c. Make them
use the private api.
When the user approaches a tablet tool to the screen we get a proximity-in event
and in this moment we need to check the surface output scale to find the scaling
to be applied to the cursor.
And the same should be done when the tool is detached or the monitors
configuration changes.
https://gitlab.gnome.org/GNOME/gtk/issues/1675
This is necessary to give back focus to the Broadway elements when
content is embedded in an IFrame.
Signed-off-by: Mickael Istria <mistria@redhat.com>
The @filename@ directive will use the full path of the file being parsed
for enumeration types; we should use @basename@, instead, as it improves
the reproducibility of the build by using only the file name.
Some of the flags got lost in the meson transition or were demoted from
error flags to warning flags.
This commit reintroduces them.
It also includes fixes for the code that had warnings with those flags.
The big one being -Wshadow.
Setting it as qdata on the object doesn't save any memory since we use
the user_data as the event target, which every event has set these days.
This way is also faster since just reffing the object doesn't do any
locking.
g-ir-scanner incorrectly evaluates macro definition that include
references to other macro definitions. Provide a correct value as an
annotation.
Differences in generated gir files:
```diff
@@ -19017 +19017 @@
- <constant name="PRIORITY_REDRAW" value="20" c:type="GDK_PRIORITY_REDRAW">
+ <constant name="PRIORITY_REDRAW" value="120" c:type="GDK_PRIORITY_REDRAW">
@@ -74229,3 +74229,3 @@
</constant>
- <constant name="PRIORITY_RESIZE" value="10" c:type="GTK_PRIORITY_RESIZE">
+ <constant name="PRIORITY_RESIZE" value="110" c:type="GTK_PRIORITY_RESIZE">
<doc xml:space="preserve">Use this priority for functionality related to size allocation.
@@ -106786,3 +106786,3 @@
<constant name="TEXT_VIEW_PRIORITY_VALIDATE"
- value="5"
+ value="125"
c:type="GTK_TEXT_VIEW_PRIORITY_VALIDATE">
```
See !472
Tools on the same physical item have the same serial number, so the eraser
and the pen part of a single pen share that serial number. With the current
lookup code, we'll always return whichever tool comes first into proximity.
Change the code to use the hw id in addition to the serial number, this way we
can differ between two tools.
Generic tools (Bamboo, built-in tablets) always have the same serial number
assigned by the wacom driver. This includes the touch tool when the wacom
driver handles the touch evdev node (common where users require the wacom
gestures to work).
When the first device is the touch device, a tool is created with that serial.
All future tools now return the touch tool on lookup since they all share the
same serial number. Worse, this happens *across* devices, so the pen
event node gets assigned the touch tool because they all have the same serial.
Since we don't actually care about the touch as a tool, let's skip any unknown
tool. This captures pads as well.
Any wacom device currently sets the tool type to UNKNOWN. The wacom driver has
a property that exports the tool type as one of stylus, eraser, cursor, pad or
touch. Only three of those are useful here but that's better than having all
of them as unknown.
* We don't output spaces anywhere in the code, unlike the doc suggested.
* CSS explicitly forbids whitespace between function names and lparens:
https://stackoverflow.com/questions/13877198
This makes apps use "Segoe UI 9" by default instead of whatever matches "Sans 10".
It also cleans up the code and uses some new pango API while at it.
This was previously disabled in 9e686d1fb5 because it led to a poor glyph coverage
on certain versions of Windows which don't default to "Segoe UI 9" (Chinese, Korean, ..)
because the font fallback list was missing in pango.
This is about to get fixed in https://gitlab.gnome.org/GNOME/pango/merge_requests/34
so enable it again when we detect a new enough pango version.
(See !436 for the original MR)
GTK widgets expect the scroll deltas to be 1 or -1 and calculate a scroll value from that.
Multiplying the delta by the Windows scroll line setting (which defaults to 3) results
in a much larger delta and vastly different behaviour for running a GTK app on Windows
vs on Linux. For example text view and tree view scroll by 9 lines per scroll wheel tick
per default this way while on Linux it is around 3.
Remove the multiplication for now.
See !426 for the gtk3 MR
Enables hinting, antialiasing and set the subpixel orientation according to the
active clear type setting. This ensures that font rendering with the fontconfig backend
looks similar to the win32 backend, at least with the default system font.
See !437
Build the .rc files for Windows so that one can track the version info
more easily for Windows, as well as giving GTK+ apps a default icon.
Also, move back the manifest embedding for the themed Windows print
dialog back into gtk-win32.rc.body.in, so that we just have one way of
embedding this manifest file, making things easier for ourselves, as
this is supported in the later Visual Studio compilers as well, which is
2013 and later.
As per the spec:
> The back buffer can
> either be reported as invalid (has an age of 0) or it may be
> reported to contain the contents from n frames prior to the
> current frame.
So a buffer age of 1 means that the buffer was used in the last frame.
We were handling buffer_age==1 the same as buffer_age==0, i.e. we
returned the full damage for the surface.
[1] https://www.khronos.org/registry/EGL/extensions/EXT/EGL_EXT_buffer_age.txt
When we decide to fall back because the settings portal
is not present, adhere to that decision elsewhere. And
treat the fontconfig-timestamp like the other special-cased
settings, with G_TYPE_NONE.
Under Wayland, we are currently directly using GSettings
for desktop settings. But in a sandbox, we may not have
access to dconf, so this may fail. Use the new settings
portal instead.
As GSettings now supports session-specific defaults, GNOME Classic
no longer uses a separate schema and the decoration layout is always
determined by the regular schema.
This essentially reverts commit add67b516c (although the code was
moved since then).
https://gitlab.gnome.org/GNOME/gtk/merge_requests/400
By returning a default surface. The situation where there's no
currentContext arises when GtkCSS is trying to determine the
layout sizes so no actual display is necessary.
Closes: #1411
Do not lie to W32 about the formats that we provide or accept.
Originally the logic behind such lies was that GdkPixbuf allows us to
convert any supported image to BMP or PNG, and therefore we should
announce that we always provide/accept BMP and PNG along with other
formats.
But that's not how it works. GDK has built-in serializers and
deserializers for all pixbuf formats (where it just invokes GdkPixbuf
API) and will use them automatically to read or write GdkTexture
objects (internally wrapping GdkPixbuf objects where necessary). The
encoding and decoding of images is handled
by GdkContent(De)Serializers, backend has nothing to do with it.
Therefore W32 GDK backend should only offer formats that it can
actually do conversion for by itself (such as image/bmp <-> CF_DIB,
or text/uri-list <-> CFSTR_SHELLIDLIST).
Instead we just cache the monitor number and get
out of it the nsscreen when it is needed. This is
a requirement since it nsscreen it is not supposed
to be cached.
Fixes: https://gitlab.gnome.org/GNOME/gtk/issues/1312
This leverages the normal input context switching mechanism in GTK
by making it think that the gtk-im-module setting changed.
The backend returns gtk-im-module value as "ime" if W32
IME API says that an IME is in use. Otherwise it returns
and empty string - this still triggers an input context
switching code, which, not being able to create the desired context
(which is and empty string), falls back to looking at current
keyboard layout (currently that code is still a FIXME).
Paired with the code that signals gtk-im-module change on keyboard layout
switches, this is sufficient to make GTK capable of switching to
the appropriate IM context at runtime. At least, the kinds of context
that specify languages for which they are used automatically by default
(once locale matching is implemented), and the IME context.
Loading other kinds of IM context might still work via specifying
the gtk-im-module setting in gtk ini file, but doing so will likely
make GTK incapable of using the IME context that is used
for Korean, Chinese and Japanese (and some other languages).
Until someone figures out a way to actually change gtk-im-module
setting on Windows at runtime with meaningful values, the behaviour
introduced by this commit seems like a sufficient workaround.
Commit 359df028be changed the
code to send GDK_SCROLL_SMOOTH with deltas instead of
GDK_SCROLL_(UP|DOWN|LEFT|RIGHT).
Windows defines deltas inversed for vertical direction
(positive values mean the wheel was turned forward)
but not for horizontal direction
(positive values mean the wheel was turned towards the right).
This commit fixes behavior as both axes were inverted previously.
Commit d64467b334 changed the
code to send GDK_SCROLL_SMOOTH with deltas instead of
GDK_SCROLL_(UP|DOWN|LEFT|RIGHT). Change it again, to send
both the GDK_SCROLL_SMOOTH and the GDK_SCROLL_(UP|DOWN|LEFT|RIGHT)
event separately (with the discrete event marked as emulated),
as this is what other backends (such as wayland) do.
Let's just use the fact that a window was mapped as a subsurface to
remap it above another transient parent instead of relying on the more
complicated 'should-map-as-subsurface' helper function.
Set delta_x or delta_y for GdkScrollEvent.
HIWORD (wParam) in WM_MOUSE(H)WHEEL is the scroll delta.
A delta value of WHEEL_DELTA (which is 120) means scrolling
one full unit of something (for example, a line).
The delta should also be multiplied by the value that the
SystemParametersInfo (SPI_GETWHEELSCROLL(LINES|CHARS), 0, &value, 0)
call gives back, unless it gives back 0xffffffff, in which case
it indicates that scrolling is page- or screen-based, not line-based
(GDK doesn't support that at the moment).
Also, all deltas should be inverted, since MS sends negative deltas
when scrolling down (rotating the wheel back, in the direction of
the user).
With deltas set the mode should be set to GDK_SCROLL_SMOOTH.
Fixes issue 1263.
GLib master propagates argument types in g_clear_pointer(), which causes
the usual function pointer casts to GDestroyNotify to trip compiler
warnings. Additionally, this commit changes some cleanup functions where
appropriate (wl_data_source_destroy ->
gtk_primary_selection_source_destroy for struct
gtk_primary_selection_source).
GtkEntryCompletion can rapidly release and claim ownership of the
primary selection. This generates multiple XFixesSelectionNotify events,
first stating that no one owns the selection, then another stating that
we own the selection. The notification that no one owns the selection
causes GtkEntryCompletion to deselect the text, breaking inline
autocompletion.
This fixes it by ignoring any XFixesSelectionNotify with a timestamp
earlier than our clipboard timestamp.
Fixes#14
file_uri_deserializer splices a memory stream, as opposed to
string_deserializer, which uses a converter and filter stream. This
commit fixes erroneous use of GMemoryOutputStream as
GFilterOutputStream.
The previous attempt at removing configure events entirely
was causing some dialogs not to show up under Wayland.
Presumably due to ordering issues with emitting ::size-change
out of the backend.
Instead, keep configure events in the event queue, but handle
them on the gdk side. This keeps the ordering intact, while
still removing configure events from the api. The dialogs
show up now.
Change GdkDrag::action to GdkDrag::selected-action, which is
more clearly different from actions, and follows the existing
name of the struct field and getter.
This lets us drop the ::action-changed signal for the
property change notification. But, can just as well move
the signal class handers which just update the cursor
to the ::action setter. No need to do this in the backends.
Rename gdkdnd.h to gdkdrag.h, to go along with gdkdrop.h
This commit includes the necessary updates to the X11, Wayland
and Broadway backends. Other backends have to be updated separately.
This is to go along with the newly introduced GdkDrop.
This commit includes the necessary updates to the X11, Wayland
and Broadway backends. Other backends have to be updated separately.
Also update the cursor surfaces of every seat when an output changes
scale. This could for example happen when a monitor scale is changed via
Settings.
This functionality is similar to Linux's memfd. It creates anonymous shared memory without touching the filesystem, which allows it to work in Capsicum capability mode (sandbox).
* There's no GdkDragContext->dest_surface anymore.
Add dest_window field to GdkWin32DragContext,
and use that instead.
* Remove unused function prototypes
* Add more comments
* Rename variables and fields from 'window' to 'surface'
where appropriate
* Fix header indentation a bit
* Try to ensure that uninitialized/unknown handle variables
and fields are set to INVALID_HANDLE_VALUE instead of NULL,
as there may be cases where NULL is a valid handle value.
This might be foreign Windows and we don't want to create surfaces for
those.
Also, stop using GdkDragContext.dest_surface, that variable is meant to
go away.
In particular, this patch removes:
gdk_surface_get_events()
gdk_surface_set_events()
gdk_surface_get_device_events()
gdk_surface_set_device_events()
Event masks so far still exist for grabs.
GdkDragContext => GdkDrop
This is all in preparation of separation of the drag and drop.
Also, don't check for GDK_DRAG_PROTO_XDND anymore - it's the only
possible value for the protocol on the target side.
Use the new method of connecting to the xevent signal instead.
Also, don't consume the xevent, there might be other code listening for
it. And we don't use PropertyNotify in the generic code path anymore, so
it'll just be ignored there.
* Remove clipdrop->dnd_target_state, it's not used anymore
* Remove non-functioning _gdk_dropfiles_store(), store dropfiles
list in GdkWin32Drop instead
* Fix multiple comment typos
* Fix _gdk_win32_get_clipboard_format_name_as_interned_mimetype() to
leave names that look like mime/types alone
* Refactor _gdk_win32_add_w32format_to_pairs() to populate
GdkContentFormatsBuilder directly, instead of making a GList
* Rename context -> drag (still using GdkDragContext type,
but [almost?] all variables and comments say "drag" now)
* Rename GdkDropContext -> GdkDrop
* Rename some parameter names for clarity
* Rewrite local protocol to look more like OLE2 protocol
instead of mirroring the structure of the X11 API.
* Add handle_events field to GdkWin32DragContext,
to shut off event handling (temporary fix until GTK is patched up)
* Remove _gdk_win32_drag_context_find() - the drag object is stored
in GdkDrop instead. Use _gdk_win32_find_drag_for_dest_surface()
to get it initially.
* Remove target_ctx_for_window, droptarget context is stored
in the surface instead.
* Call gdk_drag_context_set_cursor() just like wayland backend does
(slightly broken for now)
* Clean up the action choosing code (filter source actions by using
keyboard state, pass that to GTK, get all actions supported by GTK in
response, match them up with filtered source actions, return the
result, falling back to COPY in case of multiple actions)
* Check drag_win32->protocol instead of the use_ole2_dnd variable where
possible
* Remove protocol checks from functions that are only used by the local
protocol
* Use event state to manufacture the keyboard state for WM_MOUSEMOVE
* Change function names printed by GDK_NOTE to name the actual
functions, not their theoretical generic GDK stack ancestors
* Consistently use drag_win32 and drop_win32 variables instead of a mix
of that and win32_drag/win32_drop
* Return FALSE from button handler to ensure that GTK gets the button
event to break implicit grab
* Emit leave event on failed idroptarget_drop() calls
Instead of looking at the list of contexts, just look at the current
drop context. There is only one, after all.
Then remove the is_source argument from gdk_drag_context_find().
The filters now return TRUE/FALSE and no longer a GdkFilterReturn. They
also don't conform to the GdkFilterFunc typedef anymore but instead take
the arguments that they need.
This is not needed because GTK must be run in the main thread these days,
which is the same one that runs the main loop. So when this function is
called, the main loop is awake.
https://bugzilla.gnome.org/show_bug.cgi?id=550989
This uses the new method without GDK_ACTION_ASK:
Either it is a single action (queryable via gdk_drag_action_is_unique())
or it is not and then the drop target has to make a decision
(potentially by asking someone).
The ultimate goal of this patch series is to split GdkDragContext into
GdkDrop + GdkDrag classes for the destination and source side of a dnd
operation.
The refactoring is meant to work something like this:
1. Introduce GdkDrop as a base class
2. Make all drop related code (like GdkEvent) use GdkDrop instead of
GdkDragContext. Move/duplicate APIs to allow that.
3. Port all drop contexts in the backends from GdkDragContext to GdkDrop
4. Delete all APIs in GdkDragContext that aren't needed anymore.
5. Make GdkDragContext no longer a GdkDrop subclass
6. Rename GdkDragContext to GdkDrag
In 01455399e8 ("gdk: do not deactivate surface on keyboard grabs"), we
made gdk avoid deactivating surfaces when another application takes a
keyboard grab, by using has_focus_window instead of has_focus. That however
broke activating surfaces when the gdk application acquired a grab itself,
in which case has_focus_window is false but has_focus is true.
We thus actually need to use both: surfaces should be activated either
because we have normal keyboard focus, or because we grabbed the keyboard.
This also renames HAS_FOCUS to APPEARS_FOCUSED to better reflect its
role.
Fixes#85
There is no reason why we shouldn't pass this flag every time
Z-order changes. We have separate routines that are used to
maintain relative Z-order, so it should be completely OK to
pass SWP_NOOWNERZORDER to let the OS know that it shouldn't try
to maintain relative Z-order of the windows when raising them.
Pass SWP_NOOWNERZORDER when rising TEMP surfaces to the top. This ensures that
they don't drag anything else to the top with them. The use-case for this is
a tooltip appearing for a non-foreground surface, causing said surface to rise
above other surfaces, some of which maybe foreground at the moment.
https://bugzilla.gnome.org/show_bug.cgi?id=784766
According to the old new thing[0], we should use the instance handle
of the GDK/GTK DLL when registering GDK-specific types in the system.
Using the instance handle for the whole application in these circumstances
is not an error, but can potentially clash with the types registered
by the application itself.
Also, extract window class icons from the GDK/GTK DLL, not from the
application executable.
[0]: https://blogs.msdn.microsoft.com/oldnewthing/20050418-59/?p=35873
The argument is eventually passed to g_conv(), so it should
be the charset, not the mime/type. Without this change the
contentype converter will fail to convert UTF-8 strings to, say,
CP-1251 later on.
Includes implementation for Wayland and X11, which are the only backends
implementing the Startup Notification Protocol, returns NULL otherwise.
https://gitlab.gnome.org/GNOME/gtk/issues/1084
Similar to what has been done recently for DESKTOP_AUTOSTART_ID [1],
we need to get rid of this call to g_unsetenv() in the displays'
backends for X11 and Wayland, so that it's guarantee to happen any
thread is created, while still being accessible when needed.
Let's stash the value of this environment variable when loading the
GDK library, and provide a private method so that it can be retrieved
from the displays' backend when implementing gdk_display_make_default().
[1] https://gitlab.gnome.org/GNOME/gtk/commit/22269902
Closes: https://gitlab.gnome.org/GNOME/gtk/issues/979
It's quite old, but mostly harmless (both "message == WM_KEYUP"
and "message = WM_KEYUP" evaluate to not-FALSE, and message
value is not used after that line).
