g_input_stream_read_bytes() roughly provides the same guarantees
than g_input_stream_read() wrt the number of bytes being possibly
read (i.e. it being a best effort, but no real guarantees).
Instead, rely on the 0-len read that we'd get at the end of the
transfer.
Fixes clipboard/DnD transfers possibly being cut short, resulting
on "Broken pipe" errors on the other side.
https://gitlab.gnome.org/GNOME/gtk/issues/1Closes: #1
BTN_STYLUS3 is defined by the Linux 4.15 kernel and is sent when the
third button on a stylus is pressed. At the moment, only Wacom's "Pro
Pen 3D" has three stylus buttons. Pressing this button triggers a button
8 event to be sent under X11, so we use the same mapping here.
https://bugzilla.gnome.org/show_bug.cgi?id=790033
_gdk_win32_data_to_string() is only available when G_ENABLE_DEBUG is
defined, so as in gdkproperty-win32.c, use GDK_NOTE on the parts where
we assemble and output the debug messages.
In order to map a window with the correct initial parent-child
relationship when a modal dialog is set up to be a child of an imported
foreign window, the relationship must be set up before the window is
mapped.
In order to do this, if a window is not yet mapped, postpone the
relationship setup until when the window is eventually mapped.
https://bugzilla.gnome.org/show_bug.cgi?id=791062
After a pointer emulating GDK_TOUCH_END event triggering a fake leave
notify with GDK_CROSSING_TOUCH_END mode, pointer_under_window will be
unset, which will make the next motion/touch_update event to trigger
an enter notify event again.
Up till there, that's fine, however the motion event is just consumed
in favor of the just synthesized enter notify event. This is unexpected
to clients like spice-gtk that will only update coordinates from motion
events, sending both enter and motion is more consistent with X11 and
will make them happy.
https://bugzilla.gnome.org/show_bug.cgi?id=791039
It is unlikely that popup windows will contain anything that requires this
(popup menus being more interested in redirecting keyboard focus to
themselves). OTOH popup implementations that just grab the keyboard are
commonplace enough, it makes sense not to trigger inhibition for these.
https://bugzilla.gnome.org/show_bug.cgi?id=789268
No idea why it's here, the hash table can store any kind of data,
there's no reason why it wouldn't be able to store an old X string type.
Might be a holdout from the old days, when strings were handled in
a special way (stored directly in the clipboard?).
https://bugzilla.gnome.org/show_bug.cgi?id=786509
This prevents GTK from throwing a bunch of warnings when it tries
to get drag source window -> screen of that window -> ipc widget for that screen,
and then tries to attach a signal handler to that widget.
Specifically, this happens when we get a DnD move from another
application.
https://bugzilla.gnome.org/show_bug.cgi?id=786509
1) Ensure that any DELETE requests from the target are sent to GDK, even if
both the source and the target are in the same process and it
is therefore possible to use a shortcut and call the handler directly
in GTK layer
2) Ensure that target GDK doesn't do anything when GTK asks it to send
a DELETE request, just report back immediately (the code up the stack
does not check for successfullness when request is DELETE, so not giving
it any data is OK).
The source code already synthesizes a DELETE request, so that side is
also taken care of.
https://bugzilla.gnome.org/show_bug.cgi?id=786509
We need to know the target atom value to know when we need to
do something with side-effects (since side-effects are expressed via
special target values). Previously, the code side-stepped that by looking
at the data type (which was rather unique for the one side-effect
target that we supported, signalled by the TARGETS target),
but for the DELETE target that seems to be no longer an option, hence the new
field to carry this information past the convert_selection() routine.
This prevents GDK from throwing a warning when trying to convert
a DELETE target, which has no format or data objects set.
The side-effects for the DELETE target happen earlier, in GTK layer.
By the point it gets to change_property(), it's a no-op.
https://bugzilla.gnome.org/show_bug.cgi?id=786509
The wayland backend currently never emits GDK_SELECTION_CLEAR events.
GtkClipboard uses this signal in order to clear the clipboard owner when
the selection is set to something outside the application.
This commit ensures the wayland backend emits GDK_SELECTION_CLEAR before
setting the clipboard owner to NULL, as this means we lost the
selection.
Signed-off-by: Christophe Fergeau <cfergeau@redhat.com>
https://bugzilla.gnome.org/show_bug.cgi?id=790031
To do that, run the message loop for one second or until the side-effect
of running the selection request handler is achieved (as opposed to
running it until the event is no longer queued).
The disavantage of this method is that if the event handling is
somehow missed (due to a variety of reasons - after all, it's not
a straight path from an event being queued to property_change()
being called), this will loop for one second. Since we do process
events during that time, this will not hang the application, but
might still restrict some of the functionality.
https://bugzilla.gnome.org/show_bug.cgi?id=786509
Handle WM_CANCELMODE and do nothing in response to it when DnD is
active. Otherwise pass it to DefWindowProc, which will call ReleaseCapture()
on our behalf.
This prevents us from losing mouse capture when alt-tabbing during DnD
(this includes the feature of Windows Explorer where dragging stuff over
a window button in the taskbar causes that window to receive focus, i.e.
keyboardless alt-tabbing).
https://bugzilla.gnome.org/show_bug.cgi?id=786509
Without this patch layered windows are only updated when they are moved
by the user or then their contents changes. This patch adds opacity
changes to the list of things that make GDK update a window. Without this
windows that don't redraw and are not moved by the used (DnD drag indicator
windows, for example) don't change their opacity.
https://bugzilla.gnome.org/show_bug.cgi?id=786509
Massive changes to OLE2 DnD protocol, which was completely broken before:
* Keep GdkDragContext and OLE2 objects separate (don't ref/unref them
together, don't necessarily create them together).
* Keep IDataObject formats in the object itself, not in a global variable.
* Fix getdata() to look up the request target in its format list, not in the
global hash table
* Create target GdkDragContext on each drag_enter, destroy it on drag_leave,
whereas IDropTarget is created when a window becomes a drag destination
and is re-used indefinitely.
* Query the source IDataObject for its supported types, cache them in the
target (!) context. This is how GTK+ works, honestly.
* Remember current_src_object when we initiate a drag, to be able
to detect later on that the data object is ours and use a
shortcut when querying targets
* Make sure GDK_DRAG_MOTION is only sent when something changes
* Support GTK drag cursors
* Ensure that exotic GTK clipboard formats are registered
(but try to avoid registering formats that can't be used between applications).
* Don't enumerate internal formats
* Ensure that DnD indicator window can't accept drags or receive any kind of input
(use WS_EX_TRANSPARENT).
* Remove unneeded indentation in _gdk_win32_dnd_do_dragdrop()
* Fix indentation in gdk_win32_drag_context_drop_finish()
* Remove obsolete comments in _gdk_win32_window_register_dnd()
* Check for DnD in progress when processing WM_KILLFOCUS, don't emit a grab
break event in such cases (this allows alt-tabbing while DnD is in progress,
though there may be lingering issues with focus after dropping...)
* Support Shell ID List -> text/uri-list conversion, now it's possible
to drop files (dragged from Explorer) on GTK+ applications
* Explicitly use RegisterClipboardFormatA() when we know that the string
is not in unicode. Otherwise explicitly use RegisterClipboardFormatW()
with a UTF8->UTF16 converted string
* Fix _gdk_win32_display_get_selection_owner() to correctly bail
when selection owner HWND is NULL (looking up GdkWindow for NULL
HWND always succeeds and returns the root window - not the intended
effect)
* More logging
* Send DROP_FINISHED event after DnD loop ends
* Send STATUS event on feedback
* Move GetKeyboardState() and related code into _gdk_win32_window_drag_begin(),
so that it's closer to the point where last_pt and start_pt are set
* Use & 0x80 to check for the key being pressed. Windows will set low-order bit
to 1 for all mouse buttons to indicate that they are toggled, so simply
checking for the value not being 0 is not enough anymore.
This is probably a new thing in modern W32 that didn't exist before
(OLE2 DnD code is old).
* Fixed (hopefully) and simplified HiDPI parts of the code.
Also adds managed DnD implementation for W32 GDK backend (for both
OLE2 and LOCAL protocols). Mostly a copy of the X11 backend code, but
there are some minor differences:
* doesn't use drag_window field in GdkDragContext,
uses the one in GdkWin32DragContext exclusively
* subtracts hotspot offset from the window coordinates when showing
the dragback animation
* tries to consistently support scaling and caches the scale
in the context
* Some keynav code is removed (places where grabbing/ungrabbing should
happen is marked with TODOs), and the rest is probably inert.
Also significantly changes the way selection (and clipboard) is handled
(as MSDN rightly notes, the handling for DnD and Clipboard
formats is virtually the same, so it makes sense to handle
both with the same code):
* Don't spam GDK_OWNER_CHANGE, send them only when owner
actually changes
* Open clipboard when our process becomes the clipboard owner
(we are doing it anyway, to empty the clipboard and *become* the owner),
and then don't close it until a scheduled selection request event
(with TARGETS target) is received. Process that event by announcing
all of our supported formats (by that time add_targets() should have
been called up the stack, thus the formats are known; just in case,
add_targets() will also schedule a selection request, if one isn't
scheduled already, so that late-coming formats can still be announced).
* Allow clipboard opening for selection_convert() to be delayed if it
fails initially.
* The last two points above should fix all the bugs about GTK+ rising
too much ruckus over OpenClipboard() failures, as owner change
*is allowed* to fail (though not all callers currently handle
that case), and selection_convert() is asynchronous to begin with.
Still, this is somewhat risky, as there's a possibility that the
code will work in unexpected ways and the clipboard will remain open.
There's now logging to track the clipboard being opened and closed,
and a number of failsafes that try to ensure that it isn't kept open
for no reason.
* Added copious notes on the way clipboard works on X11, Windows and GDK-W32,
also removed old comments in DnD implementation, replaced some of them
with the new ones
* A lot of crufty module-global variables are stuffed into a singleton
object, GdkWin32Selection. It's technically possible to make it a
sub-object of the Display object (the way Wayland backend does),
but since Display object on W32 is a singleton anyway... why bother?
* Fixed the send_change_events() a bit (was slightly broken in one of the
previous iterations)
* Ensure that there's no confusion between selection conversion (an artifact
term from X11) and selection transmutation (changing the data to be W32-compatible)
* Put all the transmutation code and format-target-matching code into gdkselection-win32.c,
now this code isn't spread across multiple files.
* Consequently, moved some code away from gdkproperty-win32.c and gdkdnd-win32.c
* Extensive format transmutation checks for OLE2 DnD and clipboard.
We now keep track of which format mappings are for transmutations,
and which aren't (for example, when formats are passed as-is, or when
a registered name is just an alias)
* Put transmutation code into separate functions
* Ensure that drop target keeps a format->target map for supported formats,
this is useful when selection_convert() is called, as it only receives a
single target and no hints on the format from which the data should
be transmuted into this target.
* Add clear_targets() on W32, to de called by GTK
* Use g_set_object() instead of g_ref_object() where it is allowed.
* Fix indentation (and convert tabs to spaces), remove unused variables
https://bugzilla.gnome.org/show_bug.cgi?id=786509
Instead of using a boolean to indicate a modal operation being in progress,
use a set of flags, and allow these to be set and unset independently.
Specifically, this allows WM_CAPTURECHANGED handler to only act when a drag-move or
drag-resize modal operation is in progress, and ignore DND (which can also cause
WM_CAPTURECHANGED to be posted). This avoids a crash due to assertion failure when
OLE2 DND code tries to end a modal operation that was already ended by the WM_CAPTURECHANGED
handler.
https://bugzilla.gnome.org/show_bug.cgi?id=786121
Since on Windows we need to use a good amount of temporary GL contexts,
we need to switch back to the original GL contexts we were using when
we are done with the temporary GL contexts, otherwise multi-GL windows
will cause confusions causing display artifacts and crashes.
Also, use the GdkWin32GLContext::gl_hdc consistently throughout
the code and remove the GdkWin32Display::gl_hdc as Lukas K pointed out
that GdkWin32Display::gl_hdc becomes out-of-date and so the HDC that the
GL context is bound to becomes incorrect in sceanarios using multiple
windows with GtkGLArea/GdkGLArea items (which would cause the artifacts in
programs that use multiple windows with GtkGLArea/GdkGLArea items, and it
turns out that GdkWin32Display::gl_hdc is actually not necessary to help
keep track of the HDCs we use for our GL contexts.
Partly based on patch from Lukas K <lu@0x83.eu>
https://bugzilla.gnome.org/show_bug.cgi?id=789213
Otherwise, builds that include the Wayland backend fail.
Bug: https://bugzilla.gnome.org/show_bug.cgi?id=789630
Signed-off-by: Simon McVittie <smcv@debian.org>
Reviewed-by: Emmanuele Bassi <ebassi@gnome.org>
According to the documentation, gdk_monitor_get_geometry() reports the
monitor geometry in ”application pixels”, not in ”device pixels”,
meaning that the actual device resolution needs to be scaled down by the
scale factor of the output.
x11 backend does that downscaling, whereas Wayland backend did not,
causing a discrepancy depending on the backend used.
https://bugzilla.gnome.org/show_bug.cgi?id=783995
This state flag is used in several places in GTK+, for example to
ignore RESIZE_INC hints if tiled. Setting it is also necessary for
backwards compatibility with applications that changed their behaviour
when tiled, such as GNOME Terminal and its MATE fork.
Signed-off-by: Simon McVittie <smcv@debian.org>
https://bugzilla.gnome.org/show_bug.cgi?id=789357
If the compositor prefers server-side decorations and the client doesn't
customize the title bar, we disable client-side decorations and let the
compositor know. Otherwise, we continue to use client-side decorations.
Signed-off-by: Drew DeVault <sir@cmpwn.com>
https://bugzilla.gnome.org/show_bug.cgi?id=781909
Under Wayland, an xdg_surface.configure with size 0x0 means it's up to
the client to set its size.
When transitioning from maximized state to un-maximized, the Wayland
compositor will send such an 0x0 configure so that the client can
restore its original size.
However, the original size was already constrained, so re-applying
size constrains can lead to a smaller size when using size increments.
Avoid this caveat by not applying size constrains when we are restoring
the original size.
https://bugzilla.gnome.org/show_bug.cgi?id=777072
We were unnecessarily spewing warnings when blank cursors
were getting a new scale set. Standardize on "none" as the
name for blank cursors, and avoid the warning.
https://bugzilla.gnome.org/show_bug.cgi?id=775217
Some clients (e.g. gnome-online-accounts) quickly unmap and map
a window. With some backends the backend surface will be replaced
causing the application to crash because the GL context is still
using the old surface. Clearing the GL context when a window is
withdrawn fixes this.
https://bugzilla.gnome.org/show_bug.cgi?id=789141
Commit c415bef5de introduced support for the new _GTK_EDGE_CONSTRAINTS
atom. If the compositor supports that atom, however, we were always
setting the tiled state, even if no actual tiling information is
available, where the correct action is to completely remove any traces
of the tiled state.
Fix that by correctly removing the tiled state when compositor supports
_GTK_EDGE_CONSTRAINTS Xatom.
https://bugzilla.gnome.org/show_bug.cgi?id=788516
Following the previous patch, where edge constraints support
was added to the Wayland backend, this patch introduces the
necessary code to handle the _GTK_EDGE_CONSTRAINTS atom from
X11 backend.
https://bugzilla.gnome.org/show_bug.cgi?id=783669
Now that GTK windows have the ability to properly handle
per-edge tiling constraints, this patch extends GTK's
internal Wayland protocol to have a proper enum with the
relevant edge data.
Once this approach is validated, we can think of upstreaming
this work as an official Wayland protocol extension.
https://bugzilla.gnome.org/show_bug.cgi?id=783669
These states will be consumed by GtkWindow in order to
have better edge management on tiling situations. Their
values are supplied by the compositor, and will be send
through and X11 Atom or a Wayland protocol extension.
https://bugzilla.gnome.org/show_bug.cgi?id=783669
gdk_seat_default_grab() grabs POINTER_EVENTS if the capability is
GDK_SEAT_CAPABILITY_ALL_POINTING. But that enumerator is a union that
includes GDK_SEAT_CAPABILITY_TOUCH, but we never grabbed TOUCH_EVENTS,
an unused macro that was presumably created with this purpose in mind.
So, check which of the ALL_POINTING capabilities we have, and set the
right mask of POINTER_EVENTS and/or TOUCH_EVENTS as required.
As part of this, explicitly let TABLET_STYLUS take over pointer events,
as this is the intended behaviour and was the effective result before.
This should fix touch events being lost in migrating from Device.grab()
to Seat.grab(GDK_SEAT_CAPABILITY_ALL_POINTING), as found by Inkscape.
https://bugzilla.gnome.org/show_bug.cgi?id=781757
Under X, we were not setting the right drag cursor initially,
because at current_action == action == 0, initially. Fix this
by explicitly using the right cursor when grabbing.
Commit 1d0fad3 revealed that there were some assumptions made that were
actually to compensate for the bug fixed by that commit, so we need to
remove those assumptions as they would result in AerSnap to not work
properly on HiDPI screens.
Also re-do how we set the x and y positions of our GdkWindow, so that we
are more consistent across the board when we go between a GDK window
coordinate and a Windows API window cooredinate.
This would also simplify the code a bit.
https://bugzilla.gnome.org/show_bug.cgi?id=785999
This property contains 5 integers, of which the last 2 respectively
contain the tool serial number and tool ID. We were only extracting the
first so far, but GdkDeviceTool also has API getters for the latter,
which remained 0.
https://bugzilla.gnome.org/show_bug.cgi?id=786400
This adds support for the shortcut inhibitor protocol in gdk/wayland
backend.
A shortcut inhibitor request is issued from the gdk wayland backend for
both the older, deprecated API gdk_device_grab() and the new gdk seat
API gdk_seat_grab(), but only if the requested capability is for the
keyboard only.
https://bugzilla.gnome.org/show_bug.cgi?id=783343
This check must be done explicitly on Wayland as the master device for
tablet tools differ from the Core Pointer. This ensures that whenever a
tablet tool is inside a window and the cursor is programmatically changed,
it will be visually updated too.
https://bugzilla.gnome.org/show_bug.cgi?id=785375
Adds support for creating scroll events from Wayland tablet wheel events.
Even though no Wacom tablet puck has a smooth-scrolling wheel, both event
types need to be generated to make the upper layers happy.
https://bugzilla.gnome.org/show_bug.cgi?id=783716
If a tablet device is used to perform actions like window moving or resizing,
GTK must provide the correct implicit grab serial number over Wayland to Mutter
in order for the action to succeed. This commit adds tablet support to the
implicit serial getters.
https://bugzilla.gnome.org/show_bug.cgi?id=777333
If a bad behaving application tries to make the window/display beep too
often, throttle the beep requests so that we don't end up filling the
Wayland socket queue.
The throttle is set to 50 beeps per second, which far more beeps than
will ever make any sense from a user experience point of view, but will
avoid terminating due to an excessive amount of requests.
https://bugzilla.gnome.org/show_bug.cgi?id=778188
Wacom tablets often have a "pad" device which houses multiple buttons. At
present, these devices are incorrectly marked as GDK_SOURCE_PEN which can
cause problems for some software.
https://bugzilla.gnome.org/show_bug.cgi?id=782040
Under Wayland, when multiple keys are pressed and the user releases a
key, key repeat should continue unless the key released is the one
currently repeating.
In the case of:
- key1 press
- key1 repeat
- key2 press -> key1 repeat stopped
- key2 repeat
- key2 release
The behavior should be to cancel keyboard repeat, though key1 is still
held down. This is consistent with prior X11/XWayland behavior.
The following also must work:
- key1 press
- key2 press
- key2 release
- key2 press
- key1 release
- key2 should continue to repeat
The fix for bug #778019 should continue to work:
- key1 press
- key1 repeat
- key2 press -> key1 repeat stopped
- key1 release
- key2 should repeat
The choice to change the counter nkeys to the flag repeat_active
helps to solve the second test case.
https://bugzilla.gnome.org/show_bug.cgi?id=781285
begin_resize_drag() and begin_move_drag() check for xdg_surface being
not null, but those apply on xdg_toplevel so they should check for
xdg_toplevel being non-null instead.
https://bugzilla.gnome.org/show_bug.cgi?id=781945
When an event is received while a tooltip is showing, the GtkTooltip's
event handling code can end up calling gdk_window_set_transient_for()
from gtk_tooltip_set_last_window().
The Wayland GDK backend will try to automatically create a subsurface
in gdk_wayland_window_set_transient_for() but if the parent surface is
gone meanwhile, this will will cause a crash when trying to create a
subsurface from a parent with a null surface.
Checking for the parent is not sufficient, we ought to check for the
parent surface as well to avoid the crash.
https://bugzilla.gnome.org/show_bug.cgi?id=782283
Applications can specify the type hint as utility even on toplevel
windows.
When that toplevel is also marked as a transient for another window,
GDK Wayland backend would translate that as an xdg_popup which is not
appropriate.
While utility temp windows should remain mapped as subsurfaces (such as
the ones used by treeviews), regular windows should not translate as
neither a subsurface nor an xdg_popup.
https://bugzilla.gnome.org/show_bug.cgi?id=781945
There is no need to have every application log a warning when the
Wayland display server goes away, and we are using _exit instead of
exit elsewhere.
This is also what the X11 backend does (see gdk_x_io_error).
https://bugzilla.gnome.org/show_bug.cgi?id=745289
Aborting the application makes it look like an application bug, when
it is the expected thing to do when the Wayland display server goes
way. eg., when the user logs out. The log level is also demoted to
avoid a storm of warnings in the log from all applications whenever
this happens.
This is also what the X11 backend does (see gdk_x_io_error).
https://bugzilla.gnome.org/show_bug.cgi?id=783047
Allow getting the same export handle multiple times by calling
gdk_wayland_window_export_handle() multiple times. For each time
export() is called, a unexport() must be called to unexport.
When the window is already exported, the exported callback is called
via a idle handler. If there are multiple export() calls, they are
invoked in order either when the handle is received by the display
server, or when the idle callback is invoked.
Calling unexport() will not affect future invokations of the exported
callback, unless all export() calls have their unexport() call count
matched.
https://bugzilla.gnome.org/show_bug.cgi?id=782325
We used to inject the inclusion of the generated header file into the
generated body of the marshallers source code in order to avoid compiler
warnings about missing prototypes. The glib-genmarshal utility has been
fixed in GLib to include the prototype in the generated source, so now
we're going to trip -Werror=redundant-decls.
Use the gravity enum values when converting to gravity. It doesn't fix
anything, since the enum values were identical, but it makes a coverity
warning go away.
https://bugzilla.gnome.org/show_bug.cgi?id=780301
With Wayland, GDK_DEBUG=events would log key events but not explicitly
state whether the event is a key press or release, or if it's
originating from a key repeat.
Add some more verbosity to make sure these informations are logged on
key delivery when GDK_DEBUG is set.
https://bugzilla.gnome.org/show_bug.cgi?id=781767
It is generally a good idea to license individual files under the
same terms as the project license (in particular when the mismatch
boils down to having copied the wrong license header), so relicense
the code under the LGPL.
https://bugzilla.gnome.org/show_bug.cgi?id=781422
GdkWindow's before_process_all_updates() and after_process_all_updates()
wrongly assume that all displays are from the same class, which is not
the case if for example a client open different displays with different
backends such as X11 and Wayland.
Use the actual class for each display in the display list to avoid a
crash when mixing displays from different classes.
Fix suggested by Christian Persch <chpe@gnome.org> in bug #776472.
https://bugzilla.gnome.org/show_bug.cgi?id=776472
Make sure to clear up the number of keys being pressed on enter/leave so
that we don't end up with leftovers if a new window is mapped by a
keyboard shortcut.
https://bugzilla.gnome.org/show_bug.cgi?id=779374
The key repeat is stopped as soon as a key is pressed, so if the user
quickly presses a key while another is already pressed and being
repeated, key repeat gets cancelled:
- key1 press
- key1 repeat
- key2 press -> key1 repeat stopped
- key1 release
- key 2 is not repeated even though it's kept depressed
This is a different behavior from X11, which confuses migrating users.
To mimic the X11 behavior, keep track of the number of keys pressed
simultaneously and cancel key repeat only when none is pressed.
This way, if a user pressed a key while another one is being repeated,
the new key press can possibly be repeated as well.
Bugzilla: https://bugzilla.gnome.org/show_bug.cgi?id=778019
When resizing an xdg_popup immediately after the initial mapping, there
is a race condition between the client and the compositor which is
processing the initial size given by the xdg_positioner, leading to the
xdg_popup to be eventually of the wrong size.
Only way to make sure the size is correct in that case is to hide and
show the window again. Considering this occurs before the initial
configure is processed, it should not be noticeable.
https://bugzilla.gnome.org/show_bug.cgi?id=772505
When the GtkWidget hierarchy does not match the GdkWindow hierarchy, the
GtkWidget code may find a common ancestor that cannot be found while
traversing the GdkWindow tree using gdk_window_get_effective_parent().
This happens with for example on Wayland, a GtkPopover has another
GtkPopover as parent, in this case, the GdkWindow parent is the root
window, whereas the GtkWidget parent is the other GtkPopover.
That confuses the gtk_widget_translate_coordinates() logic which will
bail out in this case and won't return the translated coordinates.
Make gdk_window_get_effective_parent() aware of subsurfaces and use the
transient_for which represents the actual parent (whereas the parent
might be pointing to the root window).
Bugzilla: https://bugzilla.gnome.org/show_bug.cgi?id=774148
Some drivers don't do that (not sure whether that is the correct behaviour
or not). Remember each WT_PROXIMITY with LOWORD(lParam) != 0 that we get,
then look for a WT_CSRCHANGE. If WT_CSRCHANGE doesn't come, but a WT_PACKET
does, assume that this device is the one that sent WT_PROXIMITY.
Also include fallback code to ensure that WT_PACKETs for an enabled device
disable the system pointer, because WT_PROXIMITY handler might have
enabled it by mistake, since it's not possible to know which device left
the proximity (it might have been a disabled device).
https://bugzilla.gnome.org/show_bug.cgi?id=778328
Previously HiDPI scale was retrieved and applied too late in the initialization
process to affect monitor size and monitor workarea size, but the code that
initializes these sizes *did* try to use the scale, even though it was always
getting scale=1.
To fix this, move the too-late code into monitor enumeration routine.
This also fixes a probable semantic bug where width and height were divided
by scale, again.
Now monitor and workarea should be in application pixels (i.e. divided by scale),
as intended.
https://bugzilla.gnome.org/show_bug.cgi?id=778835
Otherwise we wait for the next gdk_drag_motion() call, which will
happen on the next motion event, making the drag window briefly visible
on the 0,0 root coordinates.
https://bugzilla.gnome.org/show_bug.cgi?id=778203
Clamping the anchor values as introduced in commit 9a5ffcd to fix bug
777176 breaks menu positioning.
By keeping the anchors rectangle size greater than zero, we end up
deducting some positive value from the original position, so there is no
need to clamp() actually, keeping the values positive is enough and
avoids the issue with menu positioning on the menubar.
An additional benefit is to make the code a lot simpler.
https://bugzilla.gnome.org/show_bug.cgi?id=778009
Currently hiding destroys the wl_surface and all related interfaces,
(including the gtk_surface1) so the next time the GdkWindow is mapped,
we don't bother to set the DBus properties. Toggle the check off so
it's actually issued again after the GdkWindow gets a gtk_surface1.
https://bugzilla.gnome.org/show_bug.cgi?id=773686
Previously GDK only made up monitors when it initially found none. Now it
also makes up monitors when it initially finds some, but later fails to get
their informatin in a normal way and finally prunes them out, being left with
zero monitors.
Having zero-length monitor array is unexpected and causes a number
of critical warnings and some critical functionality (such as displaying
drop-down menus) fails in such cases.
Ideally, there might be such a way to interrogate W32 API that produces the
information about non-real (but active) monitors out of it so that it isn't
necessary for us to make stuff up. However, this code is already complicated,
and i am not prepared to dig W32 API to find a way to do this.
This fixes the issues people had when they accessed a Windows desktop via RDP.
https://bugzilla.gnome.org/show_bug.cgi?id=777527
This is how windows are meant to be hidden as per the wayland
protocol, there's no need to destroy the xdg_surface and other
interfaces.
Also, rename gdk_wayland_window_hide_surface() to clear_surface(),
as that's what it does.
https://bugzilla.gnome.org/show_bug.cgi?id=773686
Elsewhere we already go through the keymap to get modifiers so we
should do the same here. In fact, this was relying on xkb modifier
mask values being bitwise compatible with GdkModifierType which isn't
necessarily true.
https://bugzilla.gnome.org/show_bug.cgi?id=770112
Gtk+ treats MOD1 as a synonym for Alt, and does not expect it to be
mapped around, so we should avoid adding GDK_META_MASK if MOD1 is
already included to avoid confusing gtk+ and applications that rely on
that behavior.
https://bugzilla.gnome.org/show_bug.cgi?id=770112
Passing a rectangle with zero width or height to xdg_shell-v6
set_anchor_rect() will cause a protocol error and terminate the client,
as with gedit when pressing the Win key.
Reason for this is because the rectangle used to set the anchor comes
from gtk_text_layout_get_iter_location() which uses the pango layout
width/height, which can be empty if there is not character at the given
location.
Make sure we don't use 0 as width or height as an anchor rectangle to
avoid the protocol error, and compensate the logical position of the
given rectangle if the size is changed, so that the actual position
remains as expected by the client.
https://bugzilla.gnome.org/show_bug.cgi?id=777176
Windows WM handles AeroSnap for normal windows on keydown. We did this
on keyup only because we do not get a keydown message, even if Windows WM
does nothing with a combination. However, in some specific cases it DOES
do something - and we have no way to detect that. Specifically, winkey+downarrow
causes maximized window to be restored by WM, and GDK fails to detect that. Then
GDK gets a keyup message, figures that winkey+downarrow was pressed and released,
and handles the combination - by minimizing the window.
To overcome this, install a low-level keyboard hook (high-level ones have
the same problem as normal message loop - they don't get messages when
Windows WM handles combinations) and use it to detect interesting key combinations
before Windows WM has a chance to block them from being processed.
Once an interesting combination is detected, post a message to the window, which
will be handled in due order.
It should be noted that this code handles key repetitions in a very crude manner.
The downside is that AeroSnap will not work if hook installation function call fails.
Also, this is a global hook, and if the hook procedure does something wrong, bad things
can happen.
https://bugzilla.gnome.org/show_bug.cgi?id=776031
Instead of using some kind of flawed logic about modifying a keypress result
when CapsLock is toggled, just add a CapsLock shift level (and all derived
shift levels, i.e. Shift+CapsLock and CapsLock+AltGr and Shift+CapsLock+AltGr)
and query Windows keyboard layout API about the result of keypresses involving
CapsLock.
Keysym table is going to be (roughly) twice as large now, but CapsLock'ed
keypresses will give correct results for some keyboard layouts (such as
Czech keyboard layout, which without this change produces lowercase letters
for CapsLock->[0,2,3,4...] instead of uppercase ones).
Keymap update time also increases accordingly.
https://bugzilla.gnome.org/show_bug.cgi?id=165385
We have a frame clock that ensures rendering is done as per the
output vsync. There is no need to have Mesa do the same for us.
This, most notably, ensures Mesa doesn't schedule frame callbacks
that will be left unattended if the compositor stops throttling
frames for its surface, this is eg. the case if the toplevel is
moved to another workspace.
Also, given a SwapInterval!=0 will always bring these unexpected
side effects, check that it's possible to disable it, and spew
a debug message if that isn't the case.
https://bugzilla.gnome.org/show_bug.cgi?id=769835
If there are no targets, DnD is probably intended to be local,
add a mimetype for matching then. The wayland protocol requires
at least one wl_data_offer.target call with the mimetype selected
for transfer.
Instead of checking for window state and giving it extra styles that
fit, just give it all styles that it is missing. It turned out that
otherwise it is impossible to, for example, restore a maximized window
via sysmenu. Also, be more flexible towards GDK/WM window state mismatches
and consider the window minimized/maximized if *either* GDK or WM thinks so.
https://bugzilla.gnome.org/show_bug.cgi?id=776485
Just set check_for_dpi_awareness = TRUE and eventually it will be handled
correctly, even if setDpiAwareFunc() returns E_ACCESSDENIED or shcore functions
are NULL.
https://bugzilla.gnome.org/show_bug.cgi?id=777031
When a subsurface is used as a parent of a popup, GDK needs to traverse
up to the transient-for as the next parent, to properly find the parent
used by the popup positioner. This is because the parent of a popup
must always either be an xdg_popup or an xdg_surface, but traversing
the "parent" (in GDK terms) upwards from a subsurface will end up on
the fake root window before we hit the actual parent (in Wayland terms).
https://bugzilla.gnome.org/show_bug.cgi?id=776225
When primary monitor is smaller than the actual monitor on which the
window is being maximized, the WM will do widnow size adjustments
that will completely screw the window size if we try to make it
smaller than 100% fullscreen (to account for taskbar size, for example).
Fix this by overriding maximized window size during WM_WINDOWPOSCHANGING.
https://bugzilla.gnome.org/show_bug.cgi?id=775808
For subsurfaces, the new state which includes the input shape is not
applied by the compositor if the subsurface is in effective synchronous
mode.
So we need to apply the input shape once parent surface is in effective
desynchronized mode, which is when it's committed, otherwise the input
shape may never be applied if the widget is not using being_paint() /
end_paint() to draw on its subsurface, like clutter does.
We do that only for empty input shape as those won't need update when
the subsurface is resized, for all other non-empty input shape, the
client still has to use begin_paint()/end_paint() for the input shape to
be applied.
https://bugzilla.gnome.org/show_bug.cgi?id=774534
We check when we realize the GdkGLContext, but we never use the check
before using the API, and it breaks on drivers that do not implement the
extension, or on drivers that only support OpenGL ES 2.0.
Wayland subsurfaces can have other native window parents, but those need
to be destroyed along with the rest of the window hierarchy otherwise
an assert() is reached.
https://bugzilla.gnome.org/show_bug.cgi?id=774915
gdk_window_get_toplevel() walks up the windows tree looking for the
corresponding toplevel window, but needs to account for subsurfaces as
well on Wayland.
https://bugzilla.gnome.org/show_bug.cgi?id=775319
The recent Wintab testing revealed an interesting edge case: we cannot
for certain say that windowing system messages will not be received
while the default display and its device manager are still being set up.
We've ruled out the Wintab case now, but cannot rule out some future bit
of runtime DLL code doing stuff at this critical time.
This commit detects and avoids a potential null pointer dereference in
the message handling code while detecting grabs. Grabs don't really
exist yet, if the default display and/or its device manager are not yet
globally known.
https://bugzilla.gnome.org/show_bug.cgi?id=774379
Now that subsurfaces can be created as child of another GdkWindow (and
not just the root window), they must be placed according to the location
of their parent, i.e. the abs_x/abs_y must be updated and taken into
account when placing and moving subsurfaces under Wayland.
https://bugzilla.gnome.org/show_bug.cgi?id=774917
Only attempt to initialize Wintab after the display manager announces
that the first default display has been set. Fixes a segfault during
initialization of specific tablet drivers' wintab32.dlls. Add assertions
and verbose comments explaining this nonsense because this stuff is a
pain to have to keep fixing.
https://bugzilla.gnome.org/show_bug.cgi?id=774379
Move the orientation sanity-checks into the packet decode func.
Rationale: the packet handling func may otherwise read beyond the end of
device->last_axis_data.
Also expand them to cope with my test Huion's weird reporting.
Also correct the azimuth angle to align with GDK's presentation.
Most importantly, fix annoying comment typo.
https://bugzilla.gnome.org/show_bug.cgi?id=774265
Fix a regression introduced in 4ce6d10601
which causes devices with an odd-numbered zero-based index in the list
to be passed over incorrectly. This might present as yet another "device
does not send pressure" bug for ~50% of devices out there.
This commit also closes off another potential segfault for wintab_devices
lists which have an odd length.
https://bugzilla.gnome.org/show_bug.cgi?id=774699
Under Wayland, a subsurface can have another surface as parent, but
gdk would not allow native windows if the parent is not the root window.
Allow native subsurface for all parent under Wayland, not just for the
root window.
https://bugzilla.gnome.org/show_bug.cgi?id=774475
This can be triggered on workspace switches, and on hidpi results in
the scale factor being reset to 1 while the window is not in the
current workspace.
https://bugzilla.gnome.org/show_bug.cgi?id=774476
As in the last commit on gdkdisplay-win32.c, we need to define that to be
0x0600 (Vista) or later so that the items needed in the Windows headers be
activated.
See: https://bugzilla.gnome.org/show_bug.cgi?id=768081#c62
... to be for Vista (0x0600) or later. This is so that the necessary
items in the Windows headers be activated so that the code will build
properly on mingw-w64, and we already require Vista or later for GTK+.
Thanks Ting-Wei Lan for pointing this out.
See: https://bugzilla.gnome.org/show_bug.cgi?id=768081#c62
The monitors are already in scaled pixels, so scaling again when retrieving
the screen size is wrong.
With GDK_SCALE unset, the initial monitor sizes are unscaled, and when the
xsettings client sets a scale > 1, the monitor sizes should be updated.
The end result is that the monitor sizes start out wrong, and get
corrected on the first xrandr event, while the screen size starts out
right and becomes wrong after the event.
This patch fixes Firefox misplacing menus and popovers when the xrandr
configuration changes while it is running.
Fix for the X11 side of
https://bugzilla.gnome.org/show_bug.cgi?id=772202
For wayland clients, the startup notification ID is currently only set
from the DESKTOP_STARTUP_ID environment variable. As that variable is
only set for clients launched via exec(), startup completion is not
indicated correctly for DBus-activated applications unless an explicit
ID is specified - usually that is not the case, as the default handling
uses gdk_notify_startup_complete().
To address this, we need API to set the startup notification ID from GTK
as we have on X11.
https://bugzilla.gnome.org/show_bug.cgi?id=768531
This enables HiDPI support for GTK+ on Windows, so that the
fonts and window look better on HiDPI displays. Notes for the current
work:
-The DPI awareness enabling can be disabled if and only if an application
manifest is not embedded in the app to enable DPI awareness AND a user
compatibility setting is not set to limit DPI awareness for the app, via
the envvar GDK_WIN32_DISABLE_HIDPI. The app manifest/user setting for
DPI awareness will always win against the envvar, and so the HiDPI items
will be always setup in such scenarios, unless DPI awareness is disabled.
-Both automatic detection for the scaling factor and setting the scale
factor using the GDK_SCALE envvar are supported, where the envvar takes
precedence, which will therefore disable automatic scaling when
resolution changes.
-I am unable to test the wintab items because I don't have such devices
around.
https://bugzilla.gnome.org/show_bug.cgi?id=768081
This way we can recommend that applications use the
fullscreen_on_monitor() API on both X and Wayland otherwise they'd
have to keep a path for each backend to achieve this functionality.
https://bugzilla.gnome.org/show_bug.cgi?id=773857
