We were leaking buffers. This wasn't caught by valgrind and friends
because it was shared memory (with the compositor), but top(1) would
instantly see memory consumption of the app and the shell go through the
roof.
We were calling _gdk_surface_update_size() every frame, even if the
window size didn't change. This would cause us to discard all cached
buffers and redraw the whole screen.
This was BAD.
guint32 is used as part of the protocol in broadway backend.
Memory size declared with it was mistakenly replaced with size_t type
which does not guarantee being 32bit on all platforms, leading to a crash.
These events don't make sense on physical devices (for starters, they
are relative to the logical pointer position). Use this device for
those events, also happens to be what the upper parts expect of them.
Commit 97b5fad131 was a forward port from a gtk3 patch, but the hunk
was applied on the wrong bits of code.
Ensure the initialization paths also do mark settings read from the
portal as valid, so the checks for optional/newer settings actually have
the expected result. It is also desirable to mark settings as valid
after configuration changes (as that patch did effectively do), but not
enough to fix all situations.
If our opaque region is the entire surface, then we can make the OpenGL
context opaque like we do for decorated windows. This improves performance
as the compositor does not need to blend the surface with the contents
behind the window.
Use the infrastructure already available to look up keys, instead.
This does the right thing and looks up the setting across all
sources.
Fixes: https://gitlab.gnome.org/GNOME/gtk/-/issues/3680
The debug spew for printing out supported buffer
formats was missing a bunch, among them the fp16
formats that are interesting for HDR support.
Add them.
Note that we still only support ARGB8888. But
at least we can print out what don't support.
We do not need to translate this on the CPU when we can instead push it
to the GPU in the same format and allow it to swizzle.
This fixes a huge number of memory allocations found while uploading the
GTK animation in widget-factory.
Just compiling these out means you have to write code slightly differently
so that you don't end up with "if ();" afterwards.
This adds a "do {} while (0)" so that we're still semantically a statement
but will also compile out.
My reading of the code is that gdk_drop_new() is not
consuming the content formats it is given, so the caller
must not pass a new reference.
Needs testing on Windows.
Whenever we communicate targets, we need to the union, otherwise
we don't tell the other side about our serialization. This makes
drops of images from gtk4-icon-browser to gimp and libreoffice
succeed in transferring data.
Fixes: #3654
When creating the output stream for a drop, we must
pass the mimetypes we support, otherwise the picking
of the right handler does not work.
Fixes: #3652
This attempts to fix the counter-intuitive resizing of surfaces in GTK4 where
the surface grows or shrinks at the right and/or bottom edge when the window
resized from the top and/or left edge(s).
This is not yet perfect as the window stutters upon resizing from the top
and/or left edges, but at least makes resizing more intuitive.
Remove the 'resized' member from the GdkWin32Surface structure, as we already
have a structure with a member that keeps track of whether a surface is being
resized, so we can just use that and avoid some confusion in the process
Sometimes the size will exceed the minimum bounds. For example crazy
applications like the widget factory that contains the world, or when a
user interactively resizes a window to be larger than the monitor the
window is on is.
The former is questionable, but the latter is not, and from here we
can't really see the difference, so just stop complaining.
Closes: https://gitlab.gnome.org/GNOME/gtk/-/issues/3035
This adds a "release" destructor for the gtk_surface1 interface which
signals to the server that a surface has been destroyed on the client
side, which the current "destroy" does not do.
Ideally the protocol would have specified a destroy request marked as
destructor to handle this automatically, however this is no longer
possible due to the destroy method being implicitly generated in the
absence of an explicit request in the protocol. Adding a destroy request
marked as destructor now would generate a new destroy method that
unconditionally would send the request to the server, which would break
clients running on servers not supporting that request.
In GTK4, we are now defaulting to the OpenGL renderer with the Cairo renderer
only used as a fallback, so there is no point keeping the code paths that use
layered windows as layered windows do not work well with OpenGL nor Vulkan.
Commit e6209de962 added some checks on TranslationEntry.valid in
order to figure out whether using the new font settings or the
old g-s-d ones. However that's only set in the non-sandboxed case.
This makes sandboxed applications fallback to the old (and also
non-existing with modern g-s-d) settings, possibly resulting in
ugly defaults being picked.
Fix this by also marking TranslationEntry elements as valid when
using the settings portal, precisely those entries that we are able
to read and match with our own table.
Have an implementation of ->request_layout() and ->compute_size() for the Win32
surface backend so that we can properly display and move and resize the
windows, as we request from the Win32 APIs.
Hxndling Aerosnap properly is mostly done except for snap_up(), which needs to
to be looked at later.
In line with what is done with the Wayland backend, enable the mapped state
independently as needed from the toplevel surface presentation, and also enable
the mapped state if necessary when presenting the popup surface.
The fact that we are using gdk-pixbuf for loading files currrently does not mean we will use it going forward.
Also, "anything gdk-pixbuf can load" does not mean anything, because what gdk-pixbuf can load is a compile-time option.
As new_from_resource() will assert() if it cannot load a resource, we must be very sure that people do not use anything but PNG and JPEG for resources and the docs were not clear on that.
When destroying a wl_surface (e.g. when a window or menu is closed), the
surface may continue to exist in the compositor slightly longer than on
the client side. In that case, the surface can still receive input
events, which need to be ignored gracefully.
In particular, this prevents segfaulting on wl_surface_get_user_data()
in that situation.
Reported in
https://gitlab.gnome.org/GNOME/gtk/-/issues/3296
The same issue for pointers/keyboards was reported in
https://bugzilla.gnome.org/show_bug.cgi?id=693338
and fixed with in
bfd7137ffb3625f17857a8fc099a72
In pointer_surface_update_scale(), only rescale the cursor surface when
the scale has actually changed and the cursor is on at least one output.
fixes https://gitlab.gnome.org/GNOME/gtk/-/issues/3350
Right now, this issue is not completely understood, so it might also
involve some questionable handling of cursor surface by sway/wlroots.
However, irrespective of that issue, this patch avoids unnecessary calls to the
compositor, and there should be no drawback: Whenever the pointer enters
a new output, pointer_surface_update_scale() will be called again, such
that correct scaling of the cursor is still ensured.
There is a slight difference: When the cursor leaves the last output,
previously the image was reset to scale factor 1. Now, it keeps whatever
was last. That might be more sensible than the previous behaviour,
assuming that it's likely that when the cursor enter an output again, it
has the same scaling. Alternatively, if one cares about resource usage
at this level, it might make more sense to destroy the surface than
rescaling to 1.
To support Sierra, we need to have access to pasteboard types as a
NSString. Constants are provided in later versions of macOS, but we
can emulate that with an array which is initialized on first access.
On older systems, the availability of some methods seem to be incorrect
based on Apple documentation. This works around the issue by using
the rect conversion on older systems.
On x11 toplevel layout is not created before toplevel
is presented, but GTK tries to update it on idle
which leads to a crash due to accessing property
of undefined object. Treat soon to be created layout
as a layout with default values upon creation (resizable).
These functions were not implemented when the sizing changes
landed before GTK 4 was released. This fixes an issue with non-
resizeable windows not reacting to layout changes.
Fixes#3532
According to OpenGL spec, a shader object will only be flagged
for deletion unless it has been detached; when a program object
is deleted, those shader objects attached to it will be detached
but not deleted unless they have already been flagged for deletion.
So we shall detach a shader object before it is deleted, and delete
it before the program object is deleted best.
Some GTK based applications such as Qemu UI create and manage
EGLSurfaces associated with the relevant GdkSurfaces. In order to create
an EGLSurface, there needs to be a way to pass the native window
object to eglCreateWindowSurface(). While running in an X environment,
the native window object can be obtained by calling
gdk_x11_surface_get_xid(). Likewise, the native window object can be
obtained by calling gdk_wayland_surface_get_wl_egl_window() while
running in a Wayland environment. Therefore, this API needs to be
exposed to apps.
Signed-off-by: Vivek Kasireddy <vivek.kasireddy@intel.com>
If set to TRUE, does not call the free func for the removed items.
This can be used to move items between arrays without having to do the
refcounting dance.
../gdk/gdktoplevellayout.c:217: Warning: Gdk: gdk_toplevel_layout_get_maximized:
unknown parameter 'maximized' in documentation comment, should be 'maximize'
100% symbol docs coverage.
833 symbols documented.
0 symbols incomplete.
0 not documented.
What's left are just type system macros and windowing system opaque
structures.
Depending on the input driver, we will get XI_Motion based scroll
events for regular mouse wheels. These are intended to be handled
as discrete scroll, so detect smooth scroll events that move by
exactly 1.0 in either direction.
Fixes: https://gitlab.gnome.org/GNOME/gtk/-/issues/3459
When being fullscreen, and wanting to unfullscreen but not caring about
whether to go unmaximized or maximized (as this information is lost), if
the GdkToplevelLayout represents the full intended state, we won't be
able to do the right thing.
To avoid this issue, make the GdkToplevelLayout API intend based, where
if one e.g. doesn't call gdk_toplevel_set_maximized() with anything, the
backend will not attempt to change the maximized state.
This means we can also remove the old 'initially_maximized' and
'initially_fullscreen' fields from the private GtkWindow struct, as we
only deal with intents now.
This is a more reliable calling point than ::resume-events, and a
good one to schedule things so they happen on a frame clock in no
special phase (Thus still fixing the original issue at 80d4a08e30)
Fixes: https://gitlab.gnome.org/GNOME/gtk/-/issues/3461
Those requests are received while dealing with the ::layout frame
clock phase, this has the unintended side effect of making the
frame clock "rewind" to handle ::flush-events again during this
frame, which delays everything and practically halves the frame
rate.
We do intend to make the motion events dispatches on the next frame,
so do this in an idle at a slightly lower priority than layout/draw,
so the ::flush-events phase is actually requested for the next frame.
Fixes: https://gitlab.gnome.org/GNOME/gtk/-/issues/3264
We don't need to go through the NSOpenGLContext for these.
We can just use the C API directly. It's also clearer what is using
CGLEnable() vs CGLSetParameter().
It was used by all surfaces to track 'is-mapped', but still part of the
GdkToplevelState, and is now replaced with a separate boolean in the
GdkSurface structure.
It also caused issues when a widget was unmapped, and due to that
unmapped a popover which hid its corresponding surface. When this
surface was hidden, it emitted a state change event, which would then go
back into GTK and queue a resize on popover widget, which would travel
back down to the widget that was originally unmapped, causing confusino
when doing future allocations.
To summarize, one should not hide widgets during allocation, and to
avoid this, make this new is-mapped boolean asynchronous when hiding a
surface, meaning the notification event for the changed mapped state
will be emitted in an idle callback. This avoids the above described
reentry issue.
We only called xdg_toplevel.(un)set_maximize() if the toplevel layout
changed, but this misses the case when the compositor had changed the
maximized state. Change it to call the xdg_toplevel request if either
the local layout changed, or if the layout differs from the current
state.
This fixes an issue where one couldn't unmaximize a window by double
clicking the titlebar that, had previously been maximized e.g. using a
keyboard binding.
Do the same for fullscreen.
This will sometimes mean a frame is skipped if a resize was requested
during the update phase of the frame dispatch. Not doing so can cause
trying to allocate a window smaller than the minimum size of the widget.
If compute_size() returns TRUE, the layout will not be propagated to
GTK. This will be used by the X11 backend to queue asynchronous resizes
that shouldn't yet allocate in GTK.
Not doing this means the next time the same surface is shown, if the
shadow size wasn't changed, it wouldn't be sent to the compositor, which
then would result in compositor deriving its own window geometry which
would include the shadow margin.
This fixes an issue where the file chooser dialog would grow each time
it opened.
The allocation of popups are part dependent of the allocation of the
root, which means the root must still be allocated when updates are
frozen, otherwise we'll try to allocate non-laid out popups.
This removes the GDK_CONFIGURE event and all related functions and data
types; it includes untested changes to the MacOSX, Win32 and Broadway
backends.
This removes the gdk_surface_set_shadow_width() function and related
vfuncs. The point here is that the shadow width and surface size can now
be communicated to GDK atomically, meaning it's possible to avoid
intermediate stages where the surface size includes the shadow, but
without the shadow width set, or the other way around.
GTK4 doesn't support arbitrary constraints when resizing a window (e.g.
steps, or aspect ratio), so we don't need to care about the result from
compute-size when doing interactive resizing.
This follows the trail of the Wayland backend in that GdkSurface changes
happen during the layout phase, and that a GDK_CONFIGURE no longer being
used to communicate the size changes of a surface; this now also uses
the layout signal on the GdkSurface.
If a surface scheduled a relayout, got frozen, and a layout phase
happened, then got unfrozen, it wouldn't see it's layout being
requested; avoid this race by remembering the pending phases until they
actually happened.
Reading the comment, it seems to be related being a window manager
decoration utility; this is not something GTK4 aims to handle, just drop
support for this.
By moving popup layout emission to the layout phase, the current
GdkPopup::poup-layout-changed signal has no value on its own as it'd be
ignored by GtkPopover.
Make the Wayland backend communicate the popup layout changes via the
common signal; but leave the rest intact until other backends catch up.
Put them in a anonymous struct, and separate the toplevel specific ones
into another anonymous struct inside the first one. Later popup related
fields will be added.
Don't have GtkRoot listen directly to the layout signal on the frame
clock, but let it pass through GdkSurface. This will allow GdkSurface to
be more involved in the layout phase.
Scheduling an update when frozen would reschedule when unfrozen; change
this to a generic pending phase enum, and use this for resrcheduling
paint and compute-size.
GdkSurface's are initialized to have the size 1x1, as otherwise we'd
receive an X11 error, would a corresponding X11 window be created.
This confuses the "saved size" mechanisms in the Wayland backend, as
treats 0 as uninitialized, and not 1.
Fix this simply not saving size that if it's smaller or equal than 1.
This will be handled between 'update' (which may trigger animation
ticks, CSS update, etc) and 'layout' which will allocate the widget
tree. It's meant to perform surface size computation, and is done
between these two phases in order to have an up to date state, and
letting the layout phase have an up to date size to layout in.
Concentrate state application to the start of a frame; this is to avoid
having GTK going back and forth between different state if so would
happen between two frames.
Queue it, and then wait for it to actually take effect, i.e. be
confirmed via a configure event from the compositor, before setting the
actual GdkSurface::state value.
The plan is to concencrate size computations as part of the frame clock
dispatch, meaning we shouldn't do it synchronously in the present()
function.
Still, in Wayland, and maybe elsewhere, it is done in the present()
function, e.g. when no state change was made, but this will eventually
be changed.
Mapping a surface under Wayland is an asynchronous process, where one
creates a surface and commits an initial state without having drawn
anything, then waiting for a configuration, which then is acknowledged
and content is painted and committed. Not until having received this
configuration is a surface actually mapped, so wait with setting the
mappedness until this.
We don't need the OpenGL view to be transparent if the window itself
is not transparent. This has the potential to speed up the compositing
of the GL view onto the NSWindow.
This fixes an issue where we would ignore events with Y delta
and no X delta while scrolling due to a typo when checking for
any delta.
This fixes deceleration of kinetic scrolling on the macOS backend.
Fixes#3418
We need to keep this consistent so that we can look things up
faster in other places. Therefore, just take the hit here and clear
the entire list ensuring prev/next poniters are cleared.
The keycode and modifier (state) parameters are in the wrong order
for gdk_key_event_new() in the gdk win32 backend, which causes
key up/down events to be populated incorrectly.
This isn't done automatically for us, so we need to synthesize it in
our hide helper.
With this commit, we properly re-focus the new main/key window after
we have closed a transient-for window.
We need to re-attach to the transient-for window whenever we present or
we risk getting placed behind the window by the display server. Apparently
that setting does not persist across a hide of the NSWindow.
since http RFC state that the header names should be processed case in-sensitive, broadway should not rely on the actual case. E.g. the go-language libraries tend to rewrite the header, which cause problems with e.g. Caddy
Fixes#3406
In gdk/win32/gdkmonitor-win32.c in function
populate_monitor_devices_from_display_config() refresh->Numerator * 1000
overflows for refresh->Numerator > 4294976.
Cast the factor 1000 to UINT64 to prevent the overflow.
Fixes#3394
The use of volatile was incorrect in GLib and has been that way for
a long time. Recently however that has changed, and this makes GTK
follow suit to avoid using volatile in the type registration.
See also: https://gitlab.gnome.org/GNOME/glib/-/merge_requests/1719
Combined with the above merge request for GLib, this fixes a large
number of compilation warnings when using Clang.
Use the set_minimized method of the xdg_toplevel
interface to implement minimization as well as possible.
It is not possible, since there is no corresponding
state that we could use to update our surface state,
but in practice, it works well enough.
Fixes: #2688
This commit fix the warning:
../gdk/wayland/gdkdisplay-wayland.c:1079: Warning: GdkWayland: gdk_wayland_display_set_cursor_theme: unknown parameter 'name' in documentation comment, should be 'theme'
Currently GTK can be built with G_ENABLE_DEBUG which enables various debug code and parsing
of those env vars, or without, which instead of parsing them prints a warning if they are set.
While building with G_ENABLE_DEBUG isn't strictly needed it's the only way to make GTK_DEBUG=interactive work,
which is a nice thing to have always.
This enables parsing of those env vars in any case and allows specific values being marked as also
available when not built with G_ENABLE_DEBUG (interactive for example). If not built with G_ENABLE_DEBUG
then all unavailable values will be marked as such in the help output and a note is added that
GTK needs to be built with G_ENABLE_DEBUG to use them, which should help discoverability.
