We always emit direction-changed when we get a new keymap, but
for state changes, we compare old and new direction and only
emit the signal when the direction actually changes.
We can get G_IO_HUP and G_IO_IN at the same time, if the compositor writes
data to us and then closes our connection. Make sure that we dispatch events
always if we have G_IO_IN and then error out if we get G_IO_HUP after that.
This way we don't have to reopen all the time for pure updates,
and we can immediately unlink the shm file to avoid "leaking" them
on improper shutdown.
We now only update surface data after we have painted. Before we painted
in an idle, which meant we might send black data some times if we e.g.
resized the window and had not painted yet. Also, it means we're updating
less often to the daemon, saving resources.
We still have to queue a flush in the idle for non-draw operations,
otherwise e.g. resize of a toplevel will never be flushed if the clock
is frozen (e.g. during toplevel resize).
We don't want to update the window size on configure event, only
the position, as the size is client side controlled. We were
updating to an old size during resizes which causes us to send
surfaces of the wrong size to the daemon.
The cursor buffer is only non-null when a cursor is created from pixbuf,
so it is not necessary to keep track of whether to free this buffer on
finalize.
By keeping a pointer to the wl_cursor struct in GdkWaylandCursor, it is
no longer necessary to duplicate cursor data (width, height, hotspots,
etc.) between wl_cursor and GdkWaylandCursor.
Instead of maintaining the init refcount in regular event handlers that can
fire in case of hotplug or mode changes, use a dedicated sync callback
to wait for roundtrips.
If a window is overlapped by a layered (i.e. partially transparent)
window then that region will not disappear from the native window clip
region. This lets us handle compositing multiple layers of windows.
For native subwindows this doesn't really work. For them we apply the
clip region as a shape to the native window which lets us have client
side windows overlapping the native window. However, with the addition
of the layered stuff the "overlapped-by-alpha-csw" part got broken, as
this area is not removed from the clip region of the native window.
We fix this by also removing the layered area when applying the shape.
This means alpha and alpha backgrounds don't work over native windows,
but there is not much to do about that.
https://bugzilla.gnome.org/show_bug.cgi?id=696370
The global_removal argument is the _name_ of the object.
We were comparing it to the _object id_ of the object.
To fix this, store the name at the time the object is bound.
We need to be a bit more careful when updating the screen
size - the code that was there would not do the right thing
if e.g. the width of one monitor was reduced.
We use a ref-count mechanism to track whether parts of the init sequence
still needs round trips to receive remaining initial state. Typically
we need a couple of roundtrips total to get the global list, then the
input and output configurations, but with the ref-count we avoid making
global assumptions like that.
https://bugzilla.gnome.org/show_bug.cgi?id=696340
Allow to set a GdkWindow to use a custom surface instead of a
wl_shell_surface. It allows to register the surface as a custom type
with some Wayland interface.
https://bugzilla.gnome.org/show_bug.cgi?id=695861
The GDK model for keymaps expects the keymap object to stay
around and emit a ::keys-changed signal. So, do that. This
should make layout changes work, but it remains untested since
weston does not support layout changes at runtime.
At the same time, plug a memory leak where GdkWaylandKeymap
forgot to free its xkb objects in finalize.
https://bugzilla.gnome.org/show_bug.cgi?id=696339
For introspection scanning which ends up calling class_init() which in
turn calls into the keybindings code, we can just use the fallback
keyval conversion code.
https://bugzilla.gnome.org/show_bug.cgi?id=696457
With this commit, we pick up xft settings from GSettings
as well. Among other things, this makes the Large Text
setting work. Still to do: pick up fontconfig changes without
having all clients use up inotify watches for all font
directories.
Add GInitable interface with a default implementation that always
succeeds. This allows backends to override the GInitable implementation
and add their own checks to determine if the backend can be loaded. If
a backend cannot be loaded, GDK can attempt to load the next available
backend.
Since backends may need to read any relevant options (such as the
display flag) to determine if they can be created successfully, this
patch also removes calls that attempt to create the display manager
before the options have been parsed.
https://bugzilla.gnome.org/show_bug.cgi?id=694465
The check for GDK_CURSOR_IS_PIXMAP was ineffective, since _all_
cursors have this type, from the looks of it. Instead, store
buffer ownership information separately.
These might be candidates for a future settings interface; until
then, we use GSettings directly. Note again that we are careful
to avoid a dependency on GNOME schemas.
Key repeat under X is not affected by modifiers. And on some systems
(e.g my Thinkpad), NumLock is permanently on, rendering key repeat
nonfunctional. This commit changes the Wayland backend to do
key repeat regardless of modifiers.
http://bugzilla.gnome.org/show_bug.cgi?id=695497
Commit 0d9d808217 fixed the hotspot issue,
but commit f2cc52fddd then optimized away
cursor changes a little too aggressively. We always need to set the
cursor on enter. Make sure we clear the current cursor on leave so we
don't think it's already set on the next enter.
https://bugzilla.gnome.org/show_bug.cgi?id=695512
Until we figure out where we want to go with settings under
Wayland, this makes GTK+ applications a lot easier to deal
with under Wayland.
Note that we are careful to deal with the absence of schemas,
so this does not introduce a dependency on GNOME settings.
wl_pointer.set_cursor is rejected if the serial number doesn't match
the enter serial number for the wl_pointer. We passed the right serial
number when setting the cursor surface in response to the enter event.
Later set_cursor requests fail, but we can still attach new buffers to
our cursor surface, which is why the cursor changed, but the hotspot
didn't update. Clicking in the decoration results in a leave/enter pair
which triggers wl_pointer.set_cursor with the right serial. That's why
clicking the decoration sets the right cursor.
https://bugzilla.gnome.org/show_bug.cgi?id=695512
We need to pass the delta between the old and new hotspot
when attaching the new cursor surface, to keep the hotspot
at the same position. We can't deal with this in the compositor,
since the set_cursor call already overwrites the old hotspot,
so the information is lost by the time the attach happens.
Unfortunately, we can't query the initial hotspot from
the compositor, so the first cursor change will make the
hotspot jump.
https://bugzilla.gnome.org/show_bug.cgi?id=695512
Use separate fields for saving the window dimensions prior to fullscreening
and maximisation. Then use those fields to restore the window dimensions from.
Requests are not limited in size by BroadwayRequest, as
BroadwayRequestTranslation can be of variable size. No need
to copy the request anymore though, because requests are aligned
now.
With recent changes in attach semantics, we always need to attach before
committing. Without this changes to the window contents to not get reflected
in the content of the surface.
Signed-off-by: Rob Bradford <rob@linux.intel.com>
We currently use this information to display the title
string in the window list of the desktop shell.
Signed-off-by: Rob Bradford <rob@linux.intel.com>
Both of them started to make use of round(), a C99 function. So, include
fallback-c89.c to provide a fallback implementation for round() for
compilers that don't have round()
https://bugzilla.gnome.org/show_bug.cgi?id=694339
If no updates, redraws, or repaints have been scheduled for this frame,
we will skip immediately to RESUME_EVENTS, and no GdkFrameTimings will
be created.
https://bugzilla.gnome.org/show_bug.cgi?id=694732
When events are paused, we should not return TRUE from prepare() or check().
GTK+ handles this for events that are already in the GTK+ queue, but
we also need suppress checks for events that are in the system queue - if we
return TRUE indicating that there are events in the system queue, then we'll
call dispatch(), and do nothing. The event source will spin, and will never
run the other phases of the paint clock.
(Broadway doesn't have a window system queue separate from the GDK event queue,
but we write the function the same way for consistency.)
https://bugzilla.gnome.org/show_bug.cgi?id=694274
When events are paused, we should not return TRUE from prepare() or check().
GTK+ handles this for events that are already in the GTK+ queue, but
we also need suppress checks for events that are in the system queue - if we
return TRUE indicating that there are events in the system queue, then we'll
call dispatch(), and do nothing. The event source will spin, and will never
run the other phases of the paint clock.
https://bugzilla.gnome.org/show_bug.cgi?id=694274
Commit 1db87c897f accidentally removed
a check for !in_paint_idle in maybe_start_idle which causes us
to create a paint loop whenever something requests a phase
inside the paint_idle.
