Wed Aug 11 23:14:25 2004 Matthias Clasen <maclas@gmx.de>
* gtk/gtk.symbols:
* gtk/gtkaction.h:
* gtk/gtkaction.c (gtk_action_set_sensitive):
(gtk_action_set_visible): Add setters for the ::sensitive
and ::visible properties of GtkAction. (#149622, David Malcolm)
Mon Jan 12 23:40:34 2004 Matthias Clasen <maclas@gmx.de>
* tests/testmerge.c: Adjust to the new connect_proxy signals.
* gtk/gtkuimanager.c
* gtk/gtkactiongroup.c
* gtk/gtkaction.c: Move the connect_proxy and disconnect_proxy signals
from GtkAction to GtkActionGroup and proxy it on GtkUIManager. This
removes the confusion between the disconnect_/connect_proxy signals
and the (unrelated) virtual functions of the same name and aligns
the setup with the pre_/post_activate signals.
2004-01-12 Jody Goldberg <jody@gnome.org>
* gtk/gtkaction.c (connect_proxy) : only connect activate for menus
with no submenus otherwise it looks like we activate every time a
submenu opens.
2004-01-10 Jody Goldberg <jody@gnome.org>
* gtk/gtkuimanager.c (d) : Add a debug macro to quiet the spew.
s/merge_signals/ui_manager_signals/ for readability.
(gtk_ui_manager_class_init) : add pre_activate and post_activate
signals.
(cb_proxy_pre_activate) : new.
(cb_proxy_post_activate) : new.
(gtk_ui_manager_insert_action_group) : connect the proxies for
GtkActionGroup::pre/post_activate
(gtk_ui_manager_remove_action_group) : disconnect them.
* gtk/gtkactiongroup.c (gtk_action_group_class_init) : add
'sensitive', and 'visible' properties. Also add pre_activate and
post_activate signals to help deal with activations at a higher
level (eg GtkUIManager)
(gtk_action_group_init) : init sensitive and visible
(gtk_action_group_set_property) : add sensitive and visible
(gtk_action_group_get_property) : add sensitive and visible
(gtk_action_group_get_sensitive) : new.
(gtk_action_group_get_visible) : new.
(cb_set_action_sensitivity) : new with minor optimization that only
signals sensitivity changes if the action could possibly change.
(cb_set_action_visiblility) : ditto.
(gtk_action_group_set_sensitive) : new. walk the actions directly
rather than using notify::sensitive because that is simpler, easier
to read, and more efficient.
(gtk_action_group_set_visible) : ditto.
(gtk_action_group_add_action) : Each action can only be in 1 group,
set GtkAction::action_group.
(gtk_action_group_remove_action) : clear it.
(gtk_action_group_add_toggle_actions_full) : warning suppression.
(gtk_action_group_add_radio_actions_full) : warning suppression.
(_gtk_action_group_emit_pre_activate) : new protected routine for use
by GtkAction.
(_gtk_action_group_emit_post_activate) : ditto.
* gtk/gtkaction.c (gtk_action_class_init) : add 'action_group' property.
(gtk_action_init) : initialize it.
(gtk_action_get_property) : get.
(gtk_action_set_property) : set it via
(gtk_action_set_action_group) : new function.
(gtk_action_sync_sensitivity) : new routine to sync proxy sensitivity
with the logical sensitivity (action & group) rather than the simple
action::sensitivity.
(gtk_action_sync_visible) : use gtk_action_is_visible to handle
logical visibility (action & group) rather than the simple
action::visible. Use widget show/hide directly.
(connect_proxy) : handle the custom sensitivity handler.
Make the TOOL_BUTTON signals more general and support TOOL_ITEM
directly, with special cases for TOOL_BUTTON. Still not especially
good it might be useful to handle label/use_underline by parmspec
lookup. Those are likely to be implemented by custom types, and are
assumed to exist in GtkToolItem.
(disconnect_proxy) : disconnect the new sensitivity handler.
(_gtk_action_emit_activate) : add pre/post signals.
(gtk_action_activate) : use logical sensitivity.
(gtk_action_is_sensitive) : logical sensitivity.
(gtk_action_get_sensitive) : actual sensitivity.
(closure_accel_activate) : use logical sensitivity.
Fri Dec 19 01:35:34 2003 Matthias Clasen <maclas@gmx.de>
Fix the behaviour of insensitive actions, which was broken
when gtk_action_activate() was changed to pay attention to
sensitivity (#129557, Christian Persch)
* gtk/gtkaction.h:
* gtk/gtkaction.c (_gtk_action_emit_activate): New auxiliary
function to emit an activate signal without regard to sensitivity.
* gtk/gtkradioaction.c:
* gtk/gtktoggleaction.c: Always use _gtk_action_emit_activate()
instead of gtk_action_activate().
2003-09-18 Matthias Clasen <maclas@gmx.de>
Install accelerators on actions, not on proxies, support
accelerator-only actions:
* gtk/gtkmenu.c (get_accel_path): New function to get the accel path
and its lock status either via _gtk_widget_get_accel_path() or by
looking at the accel_path stored in the menu item itself and determining
its lock status by peeking into the contained accel label. This was
already (accidentally) committed a week ago.
* gtk/gtkaction.h (gtk_action_set_accel_group):
(gtk_action_[dis]connect_accelerator): New functions.
* gtk/gtkaction.c (struct _GtkActionPrivate): Add accel_group,
accel_closure and accel_count. We must have a reference to the accel_group,
since we need it in connect_proxy. The count is necessary to ensure
that the accelerator isn't removed before the last proxy requesting
it has been unmerged.
(connect_proxy): Connect the accelerator to the
action now, only set the accel_path on the menuitem.
(remove_proxy): Disconnect the accelerator from the action, not from
the menuitem.
(gtk_action_set_accel_group): Set the accel group.
(gtk_action_[dis]connect_accelerator): Count the number of times
this functions have been called and install/remove the accelerator if
the count leaves/reaches zero.
* gtk/gtkuimanager.h (GtkUIManagerItemType): Add
GTK_UI_MANAGER_ACCELERATOR.
* gtk/gtkuimanager.c (NodeType): Add NODE_TYPE_ACCELERATOR.
(start_element_handler): Create NODE_TYPE_ACCELERATOR nodes from
<accelerator> elements.
(gtk_ui_manager_add_ui): Create NODE_TYPE_ACCELERATOR nodes when
type is GTK_UI_MANAGER_ACCELERATOR.
(update_node): Set the accel group on actions before creating their
proxies. Don't set the accel group on created menus. For
NODE_TYPE_ACCELERATOR nodes, [dis]connect the actions' accelerator.
(print_node): Also emit <accelerator> elements.
* tests/testmerge.c (dump_accels): Add a "Dump Accels" button.
2003-08-24 Matthias Clasen <maclas@gmx.de>
* gtk/gtkaction.[ch]:
* gtk/gtktoggleaction.[ch]:
* gtk/gtktoggleactionprivate.h:
* gtk/gtkradioaction.[ch]:
* gtk/gtkactiongroup.[ch]:
* gtk/gtkmenumerge.[ch]: A model-view separation for menus and
toolbars, using the EggMenu code by James Henstridge.
* gtk/gtk.h: Include new headers.
* gtk/Makefile.am: Add new files.
* tests/testactions.c: Test for actions.
* tests/testmerge.c: Test for menu merging.
* tests/merge-[123].ui: Test data for testmerge.
* tests/Makefile.am: Add testactions and testmerge.
* demos/gtk-demo/appwindow.c: Use GtkMenuMerge to construct the
menubar and toolbar.
