* Remove DC refcounting (we trust GDK to always do
begin_frame/end_frame calls in pairs)
* Now that there's no GDK-provided double-buffer up the stack,
double-buffering is implemented here
(though it's disabled by default - in my tests it didn't provide
any visual improvements, but did decrease performance).
* For some reason delaying window resizes until the point where
we need to blit the double-buffer into the window leads
to visual glitches, so doulbe-buffered windows are resized
in begin_frame, same as non-double-buffered ones.
* New code to clear the paint region, for all drawing modes.
Hopefully, it isn't duplicated anywhere up the stack.
* GL has its own context now, so remove any GL-related comments.
* Layered windows are still used (because cairo actually works
better with them)
* A bit more code re-use for layered windows
* Some functions that were local to gdksurface-win32.c are made
usable for the whole backend
* Drag-indicator drawing is temporarily commented out to match
a similar change in X11 backend
We used to pass 2 regions to GdkDrawCotnext.end_frame() but code was
confusing what they meant. So we now don't do that anymore and only pass
the region that matters: The frame region.
And make the GdkCairoContext as abstract.
The idea of this and thje following commits is to get rid of all
Cairo code in gdksurface.c (and $backend/gdksurface-$backend.c)
by moving that code into the Cairo context files.
In particular, the GdkSurfaceClass.begin_frame/end_frame()
functions (which are currently exclusively used by the Cairo code
should end up being moved to GdkDrawContextClass.begin/end_frame().
This has multiple benefits:
1. It unifies code between the different drawing contexts.
GL lives in GLContext, Vulkan in VulkanContext and Cairo in
CairoContext. In turn, this makes it way easier to reason about
what's going on in surface-specific code. Currently pretty much
all backends do things wrong when they want to sync to drawing
or to the frame clock.
2. It makes the API of GdkSurface smaller. No drawing code (apart
from creating the contexts) needs to remain.
3. It confines Cairo to the Drawcontext, thereby making it way
more obvious when backends are still using it in situations
where it may now conflict with OpenGL (like when doing the dnd
failed animation or in the APIs that I'm removing in this
branch).
4. We have 2 very different types of Cairo contexts: The X/win32
model, where we have a natively supported Cairo backend but do
double buffering ourselves and use similar surfaces and the
Wayland/Broadway model where we use image surfaces without any
Cairo backend support and have to submit the buffers manually.
By not sharing code between those 2 versions, we can make the
actual code way smaller. We also get around the need to create
1x1 image surfaces in the Wayland backend where we pretend
there's a native Cairo surface.
* Previous commit had misleading info. The code was
added to begin_paint() instead of end_paint(). Though
that did not affect its performance in any visible way.
* Company advised to move the code to an "after_paint" signal
handler, so that it works on all renderers, not just Cairo.
This change caused high fluctuation in FPS values in fishbowl
when it is put in a situation where it cannot achieve 60fps
(such as using Cairo renderer at ultra-high resolution).
This seems to be deliberate and not a bug.
There is no easily apparent way of being notified when frame updates
happene exactly, so we just query frame info at the end of each paint.
If we query too often (faster than DWM refresh rate), we just get
the same values twice in a row, but that is, hopefully, highly unlikely.
This commit ensures that each GdkSurface impl remembers the
cursor that GDK sets for it, and that this cursor is set
each time WM_SETCURSOR is called for that sufrace's HWND.
This is needed because W32, unlike X, has no per-window cursors -
the cursor on W32 is a global resource, and we need to keep track
of which cursor should be set when pointer is over which surface
ourselves (WM_SETCURSOR exists exactly for this reason).
This commit also makes GDK remember the surface that has an implicit
grab (since implicit grabs are gone from the upper levels of the toolkit),
and ensures that crossing events are correctly synthesized and the grab
is broken when surface focus changes. This fixes a bug where opening
a new window (by clicking something in some other, pre-existing window)
will make that new window not get any mouse input due to the fact
that the mouse-button-down event from that click caused an implicit
grab on the pre-existing window, and that grab was not released afterward.
Instead of now-unused GdkWin32Cursor class (a subclass of GdkCursor),
add a stand-alone GdkWin32HCursor class that is a wrapper around
HCURSOR handle.
On creation it's given a display instance, a HCURSOR handle and a boolean
that indicates whether the HCURSOR handle can or cannot be destroyed
(this depends on how the handle was obtained).
That information is stored in a hash table inside the GdkWin32Display
singleton, each entry of that table has reference count.
When the GdkWin32HCursor object is finalized, it reduces the reference
count on the table entry in the GdkWin32Display. When it's created,
it either adds such an entry or refs an existing one.
This way two pieces of code (or the same piece of code called
multiple times) that independently obtain the same HCURSOR from the OS
will get to different GdkWin32HCursor instances, but GdkWin32Display
will know that both use the same handle.
Once the reference count reaches 0 on the table entry, it is freed
and the handle (if destroyable) is put on the destruction list,
and an idle destruction function is queued.
If the same handle is once again registered for use before the
idle destructior is invoked (this happens, for example, when
an old cursor is destroyed and then replaced with a new one),
the handle gets removed from the destruction list.
The destructor just calls DestroyCursor() on each handle, calling
SetCursor(NULL) before doing that when the handle is in use.
This ensures that SetCursor(NULL) (which will cause cursor to disappear,
which is bad by itself, and which will also cause flickering if the
cursor is set to a non-NULL again shortly afterward)
is almost never called, unless GTK messes up and keeps using a cursor
beyond its lifetime.
This scheme also ensures that non-destructable cursors are not destroyed.
It's also possible to call _gdk_win32_display_hcursor_ref()
and _gdk_win32_display_hcursor_unref() manually instead of creating
GdkWin32HCursor objects, but that is not recommended.
Add a new W32 backend-specific message filtering mechanism.
Works roughly the same way old event filtering did, but without
events (events are GDK/X11 concept that never really made sense
on W32), so there's no functionality for 'altering' events being
emitted. If an event needs to be emitted in response to a message
do it yourself.
Implemented like this, it should give better performance than
if we were to use GLib signals for this, since W32 sends a LOT
of messages (unlike X11, which doesn't send events as often)
all the time, and invoking the signal machinery on *each* message
would probably be bad.
https://bugzilla.gnome.org/show_bug.cgi?id=773299
Rename GdkWin32Selection to GdkWin32Clipdrop, since GdkSelection
is mostly gone, and the word "selection" does not reflect the
functionality of this object too well.
Clipboard is now handled by a separate thread, most of the code for
it now lives in gdkclipdrop-win32.c, gdkclipboard-win32.c just uses
clipdrop as a backend.
The DnD source part is also put into a thread.
The DnD target part does not spin the main loop, it just
emits a GDK event and returns a default value if it doesn't get a reply
by the time the event is processed.
Both clipboard and DnD use a new GOutputStream subclass to get data
from GTK and put it into a HGLOBAL.
GdkWin32DragContext is split into GdkWin32DragContext and GdkWin32DropContext,
anticipating a similar change that slated to happen to GdkDragContext.
OLE2 DnD protocol is now used by default, set GDK_WIN32_OLE2_DND envvar to 0
to make GDK use the old LOCAL and DROPFILES protocols.
https://bugzilla.gnome.org/show_bug.cgi?id=773299
Set the display for each event that we put.
Also reorganize the dnd_event_put() function a bit, giving it a surface
directly instead of setting it by implication.
https://bugzilla.gnome.org/show_bug.cgi?id=773299
dest_surface is going to always be NULL for source contexts.
Previously we used to put the root window there to pass this check,
but root windows are gone (and root surfaces never existed to begin
with), so we have to adapt.
https://bugzilla.gnome.org/show_bug.cgi?id=773299
This affects gdk_device_query_state() for the virtual device. It has
no window, and is forced to query the display itself, and display
defaults its scale to 1 even for HiDPI desktops. Use the same
"query scale of a NULL monitor" trick that we use in other places
to get the global desktop scale.
https://bugzilla.gnome.org/show_bug.cgi?id=773299
This is an automatic rename of various things related
to the window->surface rename.
Public symbols changed by this is:
GDK_MODE_WINDOW
gdk_device_get_window_at_position
gdk_device_get_window_at_position_double
gdk_device_get_last_event_window
gdk_display_get_monitor_at_window
gdk_drag_context_get_source_window
gdk_drag_context_get_dest_window
gdk_drag_context_get_drag_window
gdk_draw_context_get_window
gdk_drawing_context_get_window
gdk_gl_context_get_window
gdk_synthesize_window_state
gdk_surface_get_window_type
gdk_x11_display_set_window_scale
gsk_renderer_new_for_window
gsk_renderer_get_window
gtk_text_view_buffer_to_window_coords
gtk_tree_view_convert_widget_to_bin_window_coords
gtk_tree_view_convert_tree_to_bin_window_coords
The commands that generated this are:
git sed -f g "GDK window" "GDK surface"
git sed -f g window_impl surface_impl
(cd gdk; git sed -f g impl_window impl_surface)
git sed -f g WINDOW_IMPL SURFACE_IMPL
git sed -f g GDK_MODE_WINDOW GDK_MODE_SURFACE
git sed -f g gdk_draw_context_get_window gdk_draw_context_get_surface
git sed -f g gdk_drawing_context_get_window gdk_drawing_context_get_surface
git sed -f g gdk_gl_context_get_window gdk_gl_context_get_surface
git sed -f g gsk_renderer_get_window gsk_renderer_get_surface
git sed -f g gsk_renderer_new_for_window gsk_renderer_new_for_surface
(cd gdk; git sed -f g window_type surface_type)
git sed -f g gdk_surface_get_window_type gdk_surface_get_surface_type
git sed -f g window_at_position surface_at_position
git sed -f g event_window event_surface
git sed -f g window_coord surface_coord
git sed -f g window_state surface_state
git sed -f g window_cursor surface_cursor
git sed -f g window_scale surface_scale
git sed -f g window_events surface_events
git sed -f g monitor_at_window monitor_at_surface
git sed -f g window_under_pointer surface_under_pointer
(cd gdk; git sed -f g for_window for_surface)
git sed -f g window_anchor surface_anchor
git sed -f g WINDOW_IS_TOPLEVEL SURFACE_IS_TOPLEVEL
git sed -f g native_window native_surface
git sed -f g source_window source_surface
git sed -f g dest_window dest_surface
git sed -f g drag_window drag_surface
git sed -f g input_window input_surface
git checkout NEWS* po-properties po docs/reference/gtk/migrating-3to4.xml
Rename all *window.[ch] source files.
This is an automatic operation, done by the following commands:
for i in $(git ls-files gdk | grep window); do
git mv $i $(echo $i | sed s/window/surface/);
git sed -f g $(basename $i) $(basename $i | sed s/window/surface/) ;
done
git checkout NEWS* po-properties po
This renames the GdkWindow class and related classes (impl, backend
subclasses) to surface. Additionally it renames related types:
GdkWindowAttr, GdkWindowPaint, GdkWindowWindowClass, GdkWindowType,
GdkWindowTypeHint, GdkWindowHints, GdkWindowState, GdkWindowEdge
This is an automatic conversion using the below commands:
git sed -f g GdkWindowWindowClass GdkSurfaceSurfaceClass
git sed -f g GdkWindow GdkSurface
git sed -f g "gdk_window\([ _\(\),;]\|$\)" "gdk_surface\1" # Avoid hitting gdk_windowing
git sed -f g "GDK_WINDOW\([ _\(]\|$\)" "GDK_SURFACE\1" # Avoid hitting GDK_WINDOWING
git sed "GDK_\([A-Z]*\)IS_WINDOW\([_ (]\|$\)" "GDK_\1IS_SURFACE\2"
git sed GDK_TYPE_WINDOW GDK_TYPE_SURFACE
git sed -f g GdkPointerWindowInfo GdkPointerSurfaceInfo
git sed -f g "BROADWAY_WINDOW" "BROADWAY_SURFACE"
git sed -f g "broadway_window" "broadway_surface"
git sed -f g "BroadwayWindow" "BroadwaySurface"
git sed -f g "WAYLAND_WINDOW" "WAYLAND_SURFACE"
git sed -f g "wayland_window" "wayland_surface"
git sed -f g "WaylandWindow" "WaylandSurface"
git sed -f g "X11_WINDOW" "X11_SURFACE"
git sed -f g "x11_window" "x11_surface"
git sed -f g "X11Window" "X11Surface"
git sed -f g "WIN32_WINDOW" "WIN32_SURFACE"
git sed -f g "win32_window" "win32_surface"
git sed -f g "Win32Window" "Win32Surface"
git sed -f g "QUARTZ_WINDOW" "QUARTZ_SURFACE"
git sed -f g "quartz_window" "quartz_surface"
git sed -f g "QuartzWindow" "QuartzSurface"
git checkout NEWS* po-properties
