Quite a few applications use GTK_WINDOW_POPUP to create various
temporary windows and place then on screen. That works fine on X11 but
on Wayland there is no global coordinate system for regular surfaces.
If the application is using a gdk temp window and set a parent with
gtk_window_transient_for(), the gdk wayland backend has all it needs to
create a subsurface that can be placed at will by the application.
Bugzilla: https://bugzilla.gnome.org/show_bug.cgi?id=759738
67ab00e01e removed the fake configure code in gtk_window_show() and
replaced it with a simple gtk_widget_realize(). The initial allocation
code in realize() only allocates the natural size or the last requested
size which now no longer is set, resulting in a too small first allocation.
This builds a configure request to compute the allocation size instead
which includes default size, CSD etc..
This problem could be seen in case of a GtkPaned in a GtkWindow with a
default size set and the pane position set as well. The first allocation
would be the natural size of the GtkPaned which would clamp the pane
position if too larg. Only the second allocation would fill the parent
window using the now wrong pane position.
https://bugzilla.gnome.org/show_bug.cgi?id=759705
When clicking "Cancel" on the "Do you want to use GTK+ Inspector?"
dialog, unregister the update_debugging idle handler. Also, steal
reference to 'inspector_window' while gtk_destroy_widget(), to make
further gtk_window_update_debugging() calls as a no-op.
https://bugzilla.gnome.org/show_bug.cgi?id=759764
Instead of having old and new style, now have a GtkCssStyleChange opaque
object that will compute the changes you are interested in for you.
This simplifies change signal handlers quite a bit and avoids lots of
repeated computation in every signal handler.
Since we're no longer doing geometry widgets, don't send
base size and increments to the window manager anymore either.
This avoids an ugly 2 pixel gap to the right and bottom of half-tiled
terminals under gnome-shell.
Applying the client-side decorations in the configure routine greatly
increases the chances of having the right size for the GtkHEaderBar and
border shadows.
Yet, it may be possible that these sizes change at a later point in
time, if for example the GtkHeaderBar grows in height while adding new
controls.
Mention this possible pitfall in the documentation for
gtk_window_resize().
https://bugzilla.gnome.org/show_bug.cgi?id=756618
Just like we did for the default size, that reduces the chances of
having the headerbar missing or wrongly sized when computing the client
side decorations controls.
https://bugzilla.gnome.org/show_bug.cgi?id=756618
It seems this branch is not needed anymore. It was originally added in
1999 to support gtk_widget_realize(), but all those reasons seem
obsolete today.
Instead just call gtk_widget_realize().
If you end up at this commit when bisecting:
There is no bug that made me remove this code, it was purely meant to be
cleanup / dead code removal. I seem to have introduced a new bug or
bisecting wouldn't have let you here. So it seems we should just revert
this commit.
Widgets such as gtkfilechooser may be saving their size and position on
the unmap callback, if the client-side decoration header bar is removed
first, the reported size will be wrong.
https://bugzilla.gnome.org/show_bug.cgi?id=756618
Fix a regression introduced by:
commit 6866d1c widget: Make gtk_widget_queue_allocate() not resize
Where the dropdown menu in Firefox would not be relocated after the
toplevel window is moved.
bugzilla: https://bugzilla.gnome.org/show_bug.cgi?id=758609
Just like it happens for window dragging, we're likely to not see the
matching button release for this event, so we must reset the controller
manually here.
https://bugzilla.gnome.org/show_bug.cgi?id=758661
Before calling gdk_window_move_resize(), store the full configure
request, not just width and height.
Fixes firefox randomly losing position of its dropdown windows.
https://bugzilla.gnome.org/show_bug.cgi?id=758609
Before the resulting window size would differ if the default size was set
before adding a headerbar vs after. Now the saved state is again the actual
requested size and it is adjusted at the time we request a window size.
https://bugzilla.gnome.org/show_bug.cgi?id=756618
GtkHeaderBar will not show the maximize button if the window in not of
type normal or not resizeable.
Use the same restriction for double-click actions as well.
Bugzilla: https://bugzilla.gnome.org/show_bug.cgi?id=757530
An application may use gtk_window_get_size() to retrieve the current
window size and later reuse that size with
gtk_window_set_default_size().
gtk_window_set_default_size() and gtk_window_get_default_size() should
also take client side decorations offset into account.
Bugzilla: https://bugzilla.gnome.org/show_bug.cgi?id=756618
Getting the shadow width must not call gtk_style_context_set_state()
because that will invalidate the node and cause a style-updated emission
which can cause gtk_widget_queue_resize() calls.
And calling queue_resize() from get_preferred_size() essentially means
the size is permanently invalid because you invalidate it while
querying it.
This causes flickering of windows when going from/to backdrop state. To
avoid this we either need to fix the theme to not have different shadow
sizes in those cases or we need to ensure the window doesn't flicker in
the first place.
At the time gtk_window_move() or gtk_window_resize() get called, there
is no way to predict if a popup window will actually draw its shadow, so
applying an offset in this case may end up with a wrong size or
positioning for such windows.
Changing the logic in gtk_window_should_use_csd() as previously done to
address that issue will cause some other breakage as popup windows may
not draw a shadow but still need CSD.
So best is to actually apply client side decorations offset for regular,
top level windows only. This is actually a lot simpler and safer and
less likely to cause additional breakage.
Bugzilla: https://bugzilla.gnome.org/show_bug.cgi?id=756618
git commit a5b1cdd0 introduced a regression where CSD windows are not
resizable with metacity.
Reason being that metacity does not support "_GTK_FRAME_EXTENTS" and
therefore gtk_window_supports_client_shadow() would always return FALSE.
This explains why it works with window managers which support
"_GTK_FRAME_EXTENTS" such as mutter/gnome-shell or xfwm4.
Partially revert commit a5b1cdd0 to reinstate the logic in
get_shadow_width().
Bugzilla: https://bugzilla.gnome.org/show_bug.cgi?id=757805
The list of popovers will specify the stacking order, a
_gtk_window_raise_popover() private call has been added so popover
widgets can request being on top.
Also, the stacking on popovers is ensured on gtk_window_size_allocate(),
after the size/stacking changes on the child widget have finished, this
will ensure popovers are kept on top of window contents.
https://bugzilla.gnome.org/show_bug.cgi?id=756670
Previous commit 305b34a "GtkWindow: fix move/get position with CSD"
introduced a regression because some windows presumably use shadows but
actually don't, resulting in a negative offset being wrongly applied.
Problem is that get_shadow_width() would return non-zero shadows even
for windows that have no shadow, thus causing the negative offset.
Fix the logic in get_shadow_width() and gtk_window_should_use_csd() so
that get_shadow_width() returns accurate values.
Bugzilla: https://bugzilla.gnome.org/show_bug.cgi?id=756618
This commit toggles the big switch. We now don't run size_allocate()
from the toplevel up anymore in cases where we don't need to.
Things might be broken in subtle ways as a result of this commit. We'll
have to find them and fix them.
Widgets that already have a resize queued don't need to walk the whole
parent chain and queue another resize. It's enough to do it once per
resize.
This also means that sizegroups cannot use the shortcut of just
invalidating the first widget in the group anymore. That widget might
already have a resize queued while others don't.
Ignore the geometry widget passed to gtk_window_set_geometry_hints().
Usind the widget itself was a hack that complicates the size request
machinery.
It is also incorrect in that it doesn't respect height-for-width.
Last but not least, it was only used by gnome-terminal and that
application can easily work without it.
Take into account and compensate for the size of the client side
decorations widgets in gtk_window_move() and gtk_window_get_pos()
including gravity.
Bugzilla: https://bugzilla.gnome.org/show_bug.cgi?id=756618
When client side decoration is used, the size passed to
gtk_window_resize() or retrieved from gtk_window_get_size() for top-
level windows also accounts for the client side decorations widgets
such as the title bar or the shadow borders.
Add up the size of these additional controls to the given size to get
the size expected.
Bugzilla: https://bugzilla.gnome.org/show_bug.cgi?id=756618
If a window is decorated, we need to draw the frame and shadow, even if
it is app-paintable - it's just nonsense to have a frame that we handle
events on, but expect the app to paint it. (We paint the titlebar in
any case.) If a client wants to handle all painting, it should use an
undecorated window.
https://bugzilla.gnome.org/show_bug.cgi?id=756886
Make it what it is - the enum - so that that it is sure that the hint
will fit in the field. Without this, any hint that doesn't fit in 3
bits will be truncated to the 3 least significant bits, causing
unexpected behaviour.
https://bugzilla.gnome.org/show_bug.cgi?id=756496
