The api to configure surfaces is now GdkToplevelLayout
and GdkPopupLayout. Unfortunately, there's still quite
a bit of internal use of GdkGeometry that will take some
time to clean up, so move it go gdkinternals.h for now.
We don't create a grabbing popup if it's not the top most one, as that
is a protocol violation, and complain if anything attempts to do it.
What we didn't do is handle this gracefully in the code that tries to
create said popup.
Fix this by dropping the attempt to show the popup on the floor, instead
of setting various state making it look like it succeeded. This won't
actually fix anything, but it'll result in a bit more accurate warnings
logged, as the state more correctly corresponds to the reality.
When we autohide a popup surface with a grab, hide all other auto hiding
popups up the popup chain. The end result is that when you click outside
a menu with submenus open, the whole menu chain is dismissed.
GdkEvent has been a "I-can't-believe-this-is-not-OOP" type for ages,
using a union of sub-types. This has always been problematic when it
comes to implementing accessor functions: either you get generic API
that takes a GdkEvent and uses a massive switch() to determine which
event types have the data you're looking for; or you create namespaced
accessors, but break language bindings horribly, as boxed types cannot
have derived types.
The recent conversion of GskRenderNode (which had similar issues) to
GTypeInstance, and the fact that GdkEvent is now a completely opaque
type, provide us with the chance of moving GdkEvent to GTypeInstance,
and have sub-types for GdkEvent.
The change from boxed type to GTypeInstance is pretty small, all things
considered, but ends up cascading to a larger commit, as we still have
backends and code in GTK trying to access GdkEvent structures directly.
Additionally, the naming of the public getter functions requires
renaming all the data structures to conform to the namespace/type-name
pattern.
For the X11 backend, keep a list of monitors for which the surface
intersects the monitor area.
Whenever the X11 surface is configured, check against the list of
monitors to determine whether it enters a new monitor or if it left a
monitor, to emit the corresponding ::enter/leave-monitor signals just
like a Wayland compositor would.
As monitors can be added, removed or reconfigured at any time, redo
those checks whenever any of these events occur.
Stop rewriting key and focus events on the GDK side.
Instead deliver them as they are, and propagate them
from the root on the gtk side, in gtkmain.c. And
stop complaining about focus events on popups - we
can just ignore them if we have no use for them.
A toplevel will only ever be transient-for to another toplevel, and only
a toplevel will ever be transient-for, so move the field into the
GdkWaylandToplevel, and make it a pointer to another GdkWaylandToplevel.
We them up there, so that code higher up compared to where they are
defined now can make use of them. Also add a few macros for type
checking and casting.
The third version of xdg-shell introduces support for explicit popup
repositioning. If available, make use of this to implement popup
repositioning.
Note that this does *NOT* include atomic parent-child state
synchronization. For that,
https://gitlab.freedesktop.org/wayland/wayland-protocols/issues/13 will
be needed.
This currently uses my own fork of wayland-protocols which adds meson
support, so that we can use it as a subproject. Eventually when
wayland-protocols' meson support lands upstream, we should change it to
point there.
Silence some meson warnings while at it to make CI happy.
This also bumps the glib requirement, since g_warning_once() is used.
We don't need all of them, only the ones that contain public API. This
allows us to reduce the chance of a stray symbol getting incorrectly
added to the introspection data.
This removes the use of the context menu and shift group
intents in gdkevents.c. If it turns out to be important,
we need to introduce vfuncs for gdk_event_triggers_context_menu
and gdk_event_matches.
Add all of the keyboard translation results in the key event,
so we can translate the keyboard state at the time the event
is created, and avoid doing state translation at match time.
We actually need to carry two sets of translation results,
since we ignore CapsLock when matching accelerators, in
gdk_event_matches().
At the same time, drop the scancode field - it is only ever
set on win32, and is basically unused in GTK.
Update all callers.
The win32 backend is using GDK_MOD2_MASK for AltGr,
so define GDK_MOD2_MASK locally to keep this working,
but remove any mention of GDK_MOD3_MASK,...,GDK_MOD5_MASK.
With C compilers defaulting to -fcommon, this isn't an issue, but
upcoming compilers (GCC 10 and Clang 11) will default to -fno-common,
ending up with duplicate definitions of these variables.
With the removal of `gdk_seat_grab` we do not need to keep the
definitions of `GdkGrabStatus` and `GdkGrabOwnership` public.
Move those definitions to become internal only.
When we reconfigure, `configure_file()` is called again, and
`*.gresource.xml` files are regenerated, which causes many (all?)
binaries to be relinked. Now we only write those out if the contents
actually changed (or if the output didn't already exist).
This is exactly what Meson already does with `configure_file()` when
`command:` is not used.
While we're at it, also do the same for `gen-c-array.py` and
`gentypefuncs.py` for completeness. Now even if the input to those
changes, re-building of those custom targets may not result in
relinking if the outputted C files have the same contents.
When we `Alt+Tab` away from a GTK application, it loses keyboard focus.
If we don't clear the modifiers, events from other devices that we
receive while unfocused will assume `Alt` is still pressed. This results
in e.g. Firefox navigating through the history instead of scrolling the
page when using the mouse wheel on it.
We don't get any information about modifiers while we are missing
keyboard focus, so assuming no modifiers are active is the best we can
do.
The shell sends us a modifier update immediately before we regain
keyboard focus, so the state shouldn't get out of sync.
Fixes https://gitlab.gnome.org/GNOME/gtk/-/issues/2112
Win32 backend doesn't have support for inhibit shortcuts, yet it needs
support the standard set of GdkToplevel properties.
Add support for the "inhibit-list" object property to GdkToplevel on
win32.
Broadway doesn't have support for inhibit shortcuts, yet it needs to
support the standard set of GdkToplevel properties.
Add support for the "inhibit-list" object property to GdkToplevel on
Broadway.
On X11, there is no such equivalent to the inhibit shortcut protocol
found on Wayland.
To implement the inhibit_system_shortcuts API on X11, we emulate the
same behavior using grabs on the keyboard.
To avoid keeping active grabs on the keyboard that would affect other
X11 applications even when the surface isn't focused, the X11
implementation takes care of releasing the grabs as soon as the toplevel
loses focus.
With the current implementation, we use a `wl_seat` as the key for our
internal has table where we store the Wayland shortcuts inhibitors.
There is however no technical reason for this, and we could use a
GdkSeat instead, which will ease the implementation of the GdkToplevel
shortcut inhibition API.
With the removal of grabs from the public API, we need a replacement API
to let applications bypass system keyboard shortcuts.
A typical use case for this API is remote desktop or virtual machine
viewers which need to inhibit the default system keyboard shortcuts so
that the remote session or virtual host gets those instead of the local
environment.
Close: https://gitlab.gnome.org/GNOME/gtk/issues/982
GTK defines various types that are meant to be derivable only within GTK
itself, and "final" from the perspective of consumers of the GTK API.
The existing macros defined by GObject, such as G_DECLARE_FINAL_TYPE and
G_DECLARE_DERIVABLE_TYPE, lack this functionality.
While we wait for GObject to get this kind of macro, we should define
our own.
Without this, the back buffers of the wrong size
keep being used, causing flickery misdraws, as
seen when expanding the expander in the popover
in widget-factory.
surface->x/y (and various x,y arguments) should be in the parent
coordinates, so treat it as such. We also keep track of the root coords
as these are needed for popup positioning.
Also, drop the isTemp property server side and the weird initial
placement at (100, 100) in the daemon. We now fully control window
placement from the client instead. If this is not we want we should do
a serious design for that but until then lets do the simplest thing.
In firefox, onload will trigger when the image is loaded, but at
that point it may not be decoded yet so showing it will sometimers
trigger flashes. We use the new decode() feature instead which ensures
both that the image is loaded *and* decoded, thus fixing the flashes.
These fixes were done blindly, to make the ci pass,
and will need review by somebody with access to an
actual win32 system to make sure the surface subtypes
are implemented properly.
There is no shape combining going on anymore, so
call this just gdk_surface_set_input_region, and
remove the offset arguments too. All callers pass
0 anyway.
Update all callers and implementations.
This is not quite right, and only temporary, since
it makes GDK_IS_POPUP (surface) true for every surface.
Eventually, the implementation will be moved to the
backends.
Sprinkle various g_assert() around the code where gcc cannot figure out
on its own that a variable is not NULL and too much refactoring would be
needed to make it do that.
Also fix usage of g_assert_nonnull(x) to use g_assert(x) because the
first is not marked as G_GNUC_NORETURN because of course GTester
supports not aborting on aborts.
Drop the input-mode, since it only makes sense for
floating devices, which we don't have anymore. And renamt
::input-source to ::source, to match the getter.
Update all users.
replace all uses with const char * (non-interned).
Also remove a lot fo juggling from atom to GdkAtom to string and back.
The X Atom hash table is now mapping to (again, non-interned) strings.
We were not properly converting the coordinates we
got to root coordinates. This was showing up as offsets
between the actual drop target and the area where drops
can happen, e.g. when dragging over a stack switcher
to switch pages.
We were forgetting to clean up the ::xevent signal
handler in some error cases. Move the signal connection
later, when we know the drag is going forward, and
use g_signal_connect_object to make sure the signal
handler is not forgotten.
This allows treating drop events like touch events, which GTK groups by
event sequence.
It's a bit ugly that we just case the GdkDrop pointer, but event
sequences are only meant to be unique pointer ids, so it's fine.
When a popup is already showing, and gdk_surface_present_popup() is
called, if the layout didn't change, we're not really interested in
relayouting.
In the future, we'll be able to get notified if position of the popup
would change by some environmental changes, but until then, just don't
support it.
