was chosen
Patch by Marek Kasik.
* gtk/gtk.symbols:
* gtk/gtkprinter.[hc]: Add gtk_printer_get_default_page_size.
* gtk/gtkprintbackend.[hc]: Add fallback implementation.
* modules/printbackends/file/gtkprintbackendfile.c:
* modules/printbackends/cups/gtkprintbackendcups.c: Implement
get_default_page_size.
* gtk/gtkpagesetupunixdialog.c: When selecting a different printer,
select its default paper size.
* gtk/gtkprintunixdialog.c: If no explicit page setup has been set,
use the printer default.
* gtk/gtkprintoperation-unix.c: Don't create an empty page setup
if we don't have a default page setup.
svn path=/trunk/; revision=20120
2008-05-05 Matthias Clasen <mclasen@redhat.com>
Apply a patch by Marek Kasik <mkasik@redhat.com> to display
more printer status information in the print dialog.
* modules/printbackends/cups/gtkprintbackendcups.c: Translate
printer-state-reasons into suitable messages and icons.
* gtk/stock-icons/16/gtk-print-error.{svg,png}:
* gtk/stock-icons/16/gtk-print-report.{svg,png}:
* gtk/stock-icons/16/gtk-print-warning.{svg,png}:
* gtk/Makefile.am:
* gtk/gtkstock.h: New stock icons to display printer state.
svn path=/trunk/; revision=20076
* modules/printbackend/cups/gtkprintbackendcups.c
(cups_printer_get_options): Fix the blacklist handling.
Patch by Marek Kašík.
svn path=/trunk/; revision=20058
2008-03-12 Jens Granseuer <jensgr@gmx.net>
* modules/printbackends/cups/gtkprintbackendcups.c:
(cups_printer_prepare_for_print): Don't define variables in the
middle of a block. (#522067)
svn path=/trunk/; revision=19789
2008-03-12 Michael Natterer <mitch@imendio.com>
* modules/printbackends/cups/gtkprintbackendcups.c: include
<glib/gstdio.h> for g_fopen().
svn path=/trunk/; revision=19775
2008-03-11 Matthias Clasen <mclasen@redhat.com>
* modules/printbackends/cups/gtkprintbackendcups.c: Use
g_ascii_formatd when formatting custom paper sizes, since
cups doesn't handle , as decimal separator. (#521548)
svn path=/trunk/; revision=19762
2007-04-30 Matthias Clasen <mclasen@redhat.com>
* modules/printbackends/cups/gtkprintbackendcups.c: Get all
the printer attributes when getting the list of printers,
not via separate requests. (#387889, Krishan Purahoo)
svn path=/trunk/; revision=17741
2007-04-23 Matthias Clasen <mclasen@redhat.com>
* modules/printbackends/cups/gtkprintbackendcups.c: Reduce
the amount of debug spew if we are not debugging.
svn path=/trunk/; revision=17619
2007-01-17 Matthias Clasen <mclasen@redhat.com>
* modules/printbackends/cups/gtkprintbackendcups.c: Don't use
httpGetFd() when building against cups 1.1
svn path=/trunk/; revision=17170
2007-01-03 Matthias Clasen <mclasen@redhat.com>
* modules/printbackends/cups/gtkprintbackendcups.c: Close
the http connection after getting the PPD.
svn path=/trunk/; revision=17042
2007-01-01 Matthias Clasen <mclasen@redhat.com>
Fix some IPP compliance issues. (#391523, Albrecht Dress)
* modules/printbackends/cups/gtkcupsutils.c
(gtk_cups_request_encode_option): Use IPP_TAG_JOB, not
IPP_TAG_OPERATION.
* modules/printbackends/cups/gtkprintbackendcups.c
(gtk_print_backend_cups_print_stream): Don't add the
requesting-user-name attribute a second time.
svn path=/trunk/; revision=17002
2006-12-27 Matthias Clasen <mclasen@redhat.com>
* modules/printbackends/cups/gtkprintbackendcups.c: Use
getters for http fields where available. (#364866,
Björn Lindqvist)
2006-11-25 Matthias Clasen <mclasen@redhat.com>
* modules/printbackends/cups/gtkprintbackendcups.c: Make
print dialog work when 'BrowseShortNames Off' is specified
in cups configuration. Patch by Tim Waugh.
2006-10-02 Matthias Clasen <mclasen@redhat.com>
* modules/printbackends/cups/gtkprintbackendcups.c (available_choices):
Only use the group name field if cups is new enough. (#357280)
2006-08-28 Matthias Clasen <mclasen@redhat.com>
* modules/printbackend/cups/gtkprintbackendcups.c: Use a
resonable timeout of 3 seconds when polling for printer
list updates, instead of 300000 seconds...
2006-08-15 Matthias Clasen <mclasen@redhat.com>
* modules/printbackends/cups/gtkprintbackendcups.c (create_pickone_option):
Simplify, make it build against cups 1.1. (#350329)
* gtk/gtkprinteroption.h:
* gtk/gtkprinteroptionwidget.c:
* modules/printbackends/cups/gtkprintbackendcups.c:
add GTK_PRINTER_OPTION_TYPE_PICKONE_PASSWORD,
GTK_PRINTER_OPTION_TYPE_PICKONE_PASSCODE,
GTK_PRINTER_OPTION_TYPE_PICKONE_REAL,
GTK_PRINTER_OPTION_TYPE_PICKONE_INT,
and GTK_PRINTER_OPTION_TYPE_PICKONE_STRING options to support a subset
of the new CUPS 1.2 custom options spec
* modules/printbackends/cups/gtkprintbackendcups.c:
(cups_request_printer_list_cb): Get the name of the first printer
in a class to use when requesting a PPD
(cups_request_ppd_cb, cups_request_ppd): Fix the parameters of
the "details-acquired" signal emittion
(cups_request_ppd): get the ppd name from the cups printer
* modules/printbackends/cups/gtkprintercups.c (gtk_printer_cups_get_ppd_name):
New method for getting the name of the ppd we should request
2006-06-21 Matthias Clasen <mclasen@redhat.com>
Apply a patch by John Palmieri to use buffered io using
GIOChannels, clean up error handling and support Cups 1.2
api in the printing code.
* acconfig.h:
* configure.in: Detect Cups 1.2
* gtk/gtkdebug.h:
* gtk/gtkmain.c: Add a printing debug key.
* gtk/gtkprintbackend.[hc]: Remove the GError parameter from
gtk_print_backend_print_stream, and take a GIOChannel instead
of an fd.
* gtk/gtkprinter-private.h:
* gtk/gtkprinter.c: Replace the fd parameter of
_gtk_printer_create_cairo_surface by a GIOChannel.
* gtk/gtkprintjob.[hc]: Remove the GError parameter from
gtk_print_job_send and make it return void.
* gtk/gtkprintoperation-unix.c:
* gtk/gtkprintjob.c: Adjust callers, add some debugging support.
* modules/printbackends/Makefile.am: Fix DIST_SUBDIRS.
* modules/printbackends/cups/Makefile.am:
* modules/printbackends/lpr/Makefile.am: Add debug CFLAGS.
* modules/printbackends/cups/gtkcupsutils.[hc]:
* modules/printbackends/cups/gtkprintbackendcups.c:
* modules/printbackends/file/gtkprintbackendfile.c:
* modules/printbackends/lpr/gtkprintbackendfile.c: Adapt to
the GIOChannel and GError changes, add debug output
2006-05-24 Alexander Larsson <alexl@redhat.com>
* gtk/gtk.symbols:
* gtk/gtkprintunixdialog.[ch]:
Add gtk_print_unix_dialog_set_manual_capabilities that controls
what widgets to enable in the dialog depending on the apps
capabilities.
* gtk/gtkprintbackend.[ch]:
* gtk/gtkprinter-private.h:
* gtk/gtkprinter.c:
* gtk/gtkprintjob.h:
Add printer_get_capabilities to backend.
Move some fallback calls to the printbackend base class.
* gtk/gtkprintoperation-unix.c:
Set manual capabilities
* modules/printbackends/cups/gtkprintbackendcups.c:
Implement get_capabilities
* modules/printbackends/lpr/gtkprintbackendlpr.c:
* modules/printbackends/pdf/gtkprintbackendpdf.c:
Move some methods to baseclass.
2006-05-15 Alexander Larsson <alexl@redhat.com>
* gtk/gtk.symbols:
* gtk/gtkprintbackend.[ch]: (_gtk_print_backend_create):
Never unload print backends.
Remove gtk_print_backend_unref_at_idle.
* modules/printbackends/cups/gtkprintbackendcups.c:
(cups_dispatch_watch_finalize):
Don't use the unref_at_idle hack since that caused
deadlocks. Instead we never unload print backends, which
is not really a big problem.
2006-05-12 Alexander Larsson <alexl@redhat.com>
* gtk/gtkrecentmanager.c:
Fix build errors.
* gtk/gtk.symbols:
* demos/gtk-demo/printing.c:
* gtk/gtkprintoperation-win32.c:
* gtk/gtkprintoperation.[ch]:
* gtk/gtkprintsettings.[ch]:
* modules/printbackends/cups/gtkprintbackendcups.c:
* modules/printbackends/lpr/gtkprintbackendlpr.c:
* modules/printbackends/pdf/gtkprintbackendpdf.c:
* tests/print-editor.c:
* tests/testnouiprint.c:
* tests/testprint.c:
* tests/testprintfileoperation.c:
Rename functions from nr_of_pages to n_pages, and num_copies to
n_copies to match other gtk+ names.
* gtk/gtkmenu.c: (gtk_menu_popdown):
Only re-set window group on popdown if we set it on popup (i.e.
if there is a parent menu shell).
Fixed part of bug #340401
* gtk/gtkwindow.c:
Add (contruct) property "transient-for" to GtkWindow. This
is needed for the fix to bug #340401.
* gtk/gtkprintunixdialog.c:
Use the transient-for property on construction and populate the dialog
with widgets after that. This fixes bug #340401.
More n_pages renames.
2006-05-10 John (J5) Palmieri <johnp@redhat.com>
* modules/printbackends/cups/gtkprintbackendcups.c:
make the _CUPS_MAP_ATTR_STR macro not dup the string so we don't
leak
2006-05-05 Christian Persch <chpe@cvs.gnome.org>
* modules/printbackends/cups/gtkprintbackendcups.c:
* modules/printbackends/lpr/gtkprintbackendlpr.c:
* modules/printbackends/pdf/gtkprintbackendpdf.c: Always register
the type with the type module, even if it had been registered
before. Fixes bug #340676.
2006-05-04 Alexander Larsson <alexl@redhat.com>
* gtk/gtk.symbols:
Added new symbols
* gtk/gtkpagesetupunixdialog.c:
* gtk/gtkprintunixdialog.c:
Destroy backends when finalizing dialogs.
Fix printer leak in selected_printer_changed.
* gtk/gtkprintbackend.[ch]:
Convert from interface to baseclass.
Move printer hashtable here so that the baseclass can handle
the slightly complicated ownership model.
Add gtk_print_backend_destroy which runs the dispose method,
causing the ref-cycles between the backend and its printers
to be broken.
Add gtk_print_backend_unref_at_idle().
* gtk/gtkprinter.[ch]:
GtkPrinter objects now ref their backend so that its always
availible, since its needed for the printer object to work.
This causes a reference-cycle that is broken using
gtk_print_backend_destroy.
Add gtk_printer_compare.
* gtk/gtkprintoperation-private.h:
* gtk/gtkprintoperation-unix.c:
* gtk/gtkprintoperation.c:
Implement !show_dialog for unix.
Make sure the print data is fully spooled before returning
from a sync run_dialog.
* modules/printbackends/cups/gtkcupsutils.[ch]:
Add gtk_cups_request_ipp_add_strings
* modules/printbackends/cups/gtkprintbackendcups.c:
* modules/printbackends/cups/gtkprintercups.c:
* modules/printbackends/lpr/gtkprintbackendlpr.c:
* modules/printbackends/pdf/gtkprintbackendpdf.c:
Convert backends to derive instead of implementing interface.
Move common code into baseclass.
CUPS:
Remove the printer polling in dispose, not finalize.
In the cups watch, remove the backend at idle instead of
immediately, since the unref can cause the module to be unloaded.
Limit the number of printer attributes requested
Get printer uri in initial printer listing so that we can use
the printer object immediately.
* tests/Makefile.am:
* tests/testnouiprint.c:
Add testcase for !show_dialog.
