We used to pass 2 regions to GdkDrawCotnext.end_frame() but code was
confusing what they meant. So we now don't do that anymore and only pass
the region that matters: The frame region.
As they require a draw context and the draw context is already bound to
the surface, it makes much more sense and reduces abiguity by moving
these APIs to the draw context.
As a side effect, we simplify GdkSurface APIs to a point where
GdkSurface now does not concern itself with drawing anymore at all,
apart from being the object that creates draw contexts.
That way, we can store the right region there: The actual painted area
instead of the exposed area (which is way too small).
Also, the GL context is the only user of this data, so storing it there
seems way smarter.
If G_ENABLE_CONSISTENCY_CHECKS is defined (i.e. if our buildtype is
'debug'), add a opengl debug callback that prints all debug messages
with a severity higher than SEVERITY_NOTIFICATION as a warning to the
console.
This is an automatic rename of various things related
to the window->surface rename.
Public symbols changed by this is:
GDK_MODE_WINDOW
gdk_device_get_window_at_position
gdk_device_get_window_at_position_double
gdk_device_get_last_event_window
gdk_display_get_monitor_at_window
gdk_drag_context_get_source_window
gdk_drag_context_get_dest_window
gdk_drag_context_get_drag_window
gdk_draw_context_get_window
gdk_drawing_context_get_window
gdk_gl_context_get_window
gdk_synthesize_window_state
gdk_surface_get_window_type
gdk_x11_display_set_window_scale
gsk_renderer_new_for_window
gsk_renderer_get_window
gtk_text_view_buffer_to_window_coords
gtk_tree_view_convert_widget_to_bin_window_coords
gtk_tree_view_convert_tree_to_bin_window_coords
The commands that generated this are:
git sed -f g "GDK window" "GDK surface"
git sed -f g window_impl surface_impl
(cd gdk; git sed -f g impl_window impl_surface)
git sed -f g WINDOW_IMPL SURFACE_IMPL
git sed -f g GDK_MODE_WINDOW GDK_MODE_SURFACE
git sed -f g gdk_draw_context_get_window gdk_draw_context_get_surface
git sed -f g gdk_drawing_context_get_window gdk_drawing_context_get_surface
git sed -f g gdk_gl_context_get_window gdk_gl_context_get_surface
git sed -f g gsk_renderer_get_window gsk_renderer_get_surface
git sed -f g gsk_renderer_new_for_window gsk_renderer_new_for_surface
(cd gdk; git sed -f g window_type surface_type)
git sed -f g gdk_surface_get_window_type gdk_surface_get_surface_type
git sed -f g window_at_position surface_at_position
git sed -f g event_window event_surface
git sed -f g window_coord surface_coord
git sed -f g window_state surface_state
git sed -f g window_cursor surface_cursor
git sed -f g window_scale surface_scale
git sed -f g window_events surface_events
git sed -f g monitor_at_window monitor_at_surface
git sed -f g window_under_pointer surface_under_pointer
(cd gdk; git sed -f g for_window for_surface)
git sed -f g window_anchor surface_anchor
git sed -f g WINDOW_IS_TOPLEVEL SURFACE_IS_TOPLEVEL
git sed -f g native_window native_surface
git sed -f g source_window source_surface
git sed -f g dest_window dest_surface
git sed -f g drag_window drag_surface
git sed -f g input_window input_surface
git checkout NEWS* po-properties po docs/reference/gtk/migrating-3to4.xml
This renames the GdkWindow class and related classes (impl, backend
subclasses) to surface. Additionally it renames related types:
GdkWindowAttr, GdkWindowPaint, GdkWindowWindowClass, GdkWindowType,
GdkWindowTypeHint, GdkWindowHints, GdkWindowState, GdkWindowEdge
This is an automatic conversion using the below commands:
git sed -f g GdkWindowWindowClass GdkSurfaceSurfaceClass
git sed -f g GdkWindow GdkSurface
git sed -f g "gdk_window\([ _\(\),;]\|$\)" "gdk_surface\1" # Avoid hitting gdk_windowing
git sed -f g "GDK_WINDOW\([ _\(]\|$\)" "GDK_SURFACE\1" # Avoid hitting GDK_WINDOWING
git sed "GDK_\([A-Z]*\)IS_WINDOW\([_ (]\|$\)" "GDK_\1IS_SURFACE\2"
git sed GDK_TYPE_WINDOW GDK_TYPE_SURFACE
git sed -f g GdkPointerWindowInfo GdkPointerSurfaceInfo
git sed -f g "BROADWAY_WINDOW" "BROADWAY_SURFACE"
git sed -f g "broadway_window" "broadway_surface"
git sed -f g "BroadwayWindow" "BroadwaySurface"
git sed -f g "WAYLAND_WINDOW" "WAYLAND_SURFACE"
git sed -f g "wayland_window" "wayland_surface"
git sed -f g "WaylandWindow" "WaylandSurface"
git sed -f g "X11_WINDOW" "X11_SURFACE"
git sed -f g "x11_window" "x11_surface"
git sed -f g "X11Window" "X11Surface"
git sed -f g "WIN32_WINDOW" "WIN32_SURFACE"
git sed -f g "win32_window" "win32_surface"
git sed -f g "Win32Window" "Win32Surface"
git sed -f g "QUARTZ_WINDOW" "QUARTZ_SURFACE"
git sed -f g "quartz_window" "quartz_surface"
git sed -f g "QuartzWindow" "QuartzSurface"
git checkout NEWS* po-properties
Remove all the old 2.x and 3.x version annotations.
GTK+ 4 is a new start, and from the perspective of a
GTK+ 4 developer all these APIs have been around since
the beginning.
As far as possible, use per-display debug flags.
This will minimize the debug spew that we get from
the inspector if it is running on a separate display.
This is a way to query the damaged area of the backbuffer.
The GL renderer uses this to compute the extents of that damage region
(computed via buffer age) and use them to minimize the area to redraw.
This changes the semantics of GL rendering to "When calling
gdk_window_begin_frame() with a GL context, the area by
gdk_gl_context_get_damage() needs to be redrawn and every other pixel of
the backbuffer is guaranteed to be correct.
After gdk_window_end_frame() on a GL-drawn window, the whole backbuffer
must be correct.
We can always glXBufferSwap() now because of this.
... instead of a gl context.
This requires some refactoring in the way we mark the shared context as
drawing: We now call begin_frame/end_frame() on it and ignore the call
on the main context.
Unfortunately we need to do this check in all vfuncs, which sucks. But I
haven't found a better way.
This way, we can query the GL context's state via
gdk_gl_context_is_drawing().
Use this function to make GL contexts as attached and grant them access
to the front/backbuffer for rendering.
All of this is still unused because GL drawing is still disabled.
Now that the use_es field is an int with a possible negative value, we
cannot use it its truth value directly; we need to check if it's a
positive value, instead.
GDK defaults to asking for an OpenGL 3.2 Core Profile, but if we get a
legacy profile from the underlying windowing system, the OpenGL version
will be fixed to 3.0. If that happens, we need to set the legacy bit on
the GdkGLContext, since that bit will be used to determine the version
and type of GLSL shaders that will be used by application and toolkit
code alike.
We've already set ->use_es correctly at context creation time, all this
can possibly do is change our mind about what kind of GL we're using.
Signed-off-by: Adam Jackson <ajax@redhat.com>
https://bugzilla.gnome.org/show_bug.cgi?id=773180
Calling gdk_gl_context_realize() should always result in a valid result,
so we need to provide a default implementation, to avoid a call to a
NULL function pointer.
When uploading a Cairo image surface to a GL texture we cannot use
GL_BGRA and GL_UNSIGNED_INT_8_8_8_8_REV on OpenGL ES, as they do not
exist in the core spec.
On some platforms we can ask the GL context machinery to create a GLES
context, instead of a GL one.
In order to ask for a GLES context at GdkGLContext realization time, we
use a bit field like we do for forward compatible, or debug contexts.
The 'use-es' bit also changes the way we select a default version,
because OpenGL and OpenGLES versions differ.
https://bugzilla.gnome.org/show_bug.cgi?id=743746
The g_print documentation explicitly says not to do this, since
g_print is meant to be redirected by applications. Instead use
g_message for logging that can be triggered via GTK_DEBUG.
We want to have the ability to fall back to legacy GL contexts when
creating them. In order to do so, we need to store the legacy bit on the
GdkGLContext, as well as being able to query it.
Setting the legacy bit from outside GDK is not possible; we cannot
create GL contexts in 3.2 core profile *and* compatibility modes at the
same time, and if we allowed users to select the legacy mode themselves,
it would break the creation of the GdkWindow's paint GL context.
What we do allow is falling back to legacy GL context if the platform
does not support 3.2 core profiles — for instance, on older GPUs or
inside virtualized environments.
We are also going to use the legacy bit internally, to choose which GL
API we can use when drawing GL content.
https://bugzilla.gnome.org/show_bug.cgi?id=756142
If the user requests a version less than 3.2 the version is forced to 3.2.
Previous checking code have an inconsistent behavior depending on which
minor version number was specified. This is avoided now by temporarily
converting the major/minor pair into a single integer.
https://bugzilla.gnome.org/show_bug.cgi?id=744288
The existence of OpenGL implementations that do not provide the full
core profile compatibility because of reasons beyond the technical, like
llvmpipe not implementing floating point buffers, makes the existence of
GdkGLProfile and documenting the fact that we use core profiles a bit
harder.
Since we do not have any existing profile except the default, we can
remove the GdkGLProfile and its related API from GDK and GTK+, and sweep
the whole thing under the carpet, while we wait for an extension that
lets us ask for the most compatible profile possible.
https://bugzilla.gnome.org/show_bug.cgi?id=744407
Store the OpenGL version when we first do the extensions check; this
allows client code to check the available GL version without requiring a
call to gdk_gl_context_make_current() and epoxy_gl_version().
Now that we have a two-stages GL context creation sequence, we can move
the profile to a pre-realize option, like the debug and forward
compatibility bits, or the GL version to use.
We simply don't want to care about legacy OpenGL.
All supported platforms also have support for OpenGL ≥ 3.2; it would
complicate the internal code; and would force us to use legacy GL
contexts internally if the first context created by the user is a legacy
GL context, and disable creation of core-3.2 contexts after that.
We will need to fix all our code examples to use the Core 3.2 profile.
https://bugzilla.gnome.org/show_bug.cgi?id=741946
