Some compilers support __attribute__((__ifunc__())) even though the
dynamic linker does not. The compiler is able to create the binary
but it will fail on startup. So it is not enough to just test if
the attribute is supported.
The default value for enable_ifunc is now auto, which will attempt
to compile a program using __attribute__((__ifunc__())). There are
additional checks in this program if glibc is being used or if it
is running on FreeBSD.
Setting --enable-ifunc will skip this test and always enable
__attribute__((__ifunc__())), even if is not supported.
Now configure will fail if -fsanitize= is found in CFLAGS
and sanitizer-incompatible ifunc or Landlock sandboxing
would be used. These are incompatible with one or more sanitizers.
It's simpler to reject all -fsanitize= uses instead of trying to
pass those that might not cause problems.
CMake-based build was updated similarly. It lets the configuration
finish (SEND_ERROR instead of FATAL_ERROR) so that both error
messages can be seen at once.
This removes support for FreeBSD 10.0 and 10.1 which used
<sys/capability.h> instead of <sys/capsicum.h>. Support for
FreeBSD 10.1 ended on 2016-12-31. So now FreeBSD >= 10.2 is
required to enable Capsicum support.
This also removes support for Capsicum on Linux (libcaprights)
which seems to have been unmaintained since 2017 and Linux 4.11:
https://github.com/google/capsicum-linux
See the new comment in the code.
This also makes the check for clock_gettime() run with MinGW-w64
with which we don't want to use clock_gettime(). The previous
commit already took care of this situation.
Both crc32_clmul() and crc64_clmul() are now exported from
crc32_clmul.c as lzma_crc32_clmul() and lzma_crc64_clmul(). This
ensures that is_clmul_supported() (now lzma_is_clmul_supported()) is
not duplicated between crc32_fast.c and crc64_fast.c.
Also, it encapsulates the complexity of the CLMUL implementations into a
single file and reduces the complexity of crc32_fast.c and crc64_fast.c.
Before, CLMUL code was present in crc32_fast.c, crc64_fast.c, and
crc_common.h.
During the conversion, various cleanups were applied to code (thanks to
Lasse Collin) including:
- Require using semicolons with MASK_/L/H/LH macros.
- Variable typing and const handling improvements.
- Improvements to comments.
- Fixes to the pragmas used.
- Removed unneeded variables.
- Whitespace improvements.
- Fixed CRC_USE_GENERIC_FOR_SMALL_INPUTS handling.
- Silenced warnings and removed the need for some #pragmas
Now if user-supplied CFLAGS contains -Wall -Wextra -Wpedantic
the two checks that need -Werror will still work.
At CMake side there is add_compile_options(-Wall -Wextra)
but it didn't affect the -Werror tests. So with both Autotools
and CMake only user-supplied CFLAGS could make the checks fail
when they shouldn't.
This is not a full fix as things like -Wunused-macros in
user-supplied CFLAGS will still cause problems with both
GCC and Clang.
There were two uses of AC_COMPILE_IFELSE that didn't use
AC_LANG_SOURCE and Autoconf warned about these. The omission
had been intentional but it turned out that this didn't do
what I thought it would.
Autoconf 2.71 manual gives an impression that AC_LANG_SOURCE
inserts all #defines that have been made with AC_DEFINE so
far (confdefs.h). The idea was that omitting AC_LANG_SOURCE
would mean that only the exact code included in the
AC_COMPILE_IFELSE call would be compiled.
With C programs this is not true: the #defines get added without
AC_LANG_SOURCE too. There seems to be no neat way to avoid this.
Thus, with the C language at least, adding AC_LANG_SOURCE makes
no other difference than silencing a warning from Autoconf. The
generated "configure" remains identical. (Docs of AC_LANG_CONFTEST
say that the #defines have been inserted since Autoconf 2.63b and
that AC_COMPILE_IFELSE uses AC_LANG_CONFTEST. So the behavior is
documented if one also reads the docs of macros that one isn't
calling directly.)
Any extra code, including #defines, can cause problems for
these two tests because these tests must use -Werror.
CC=clang CFLAGS=-Weverything is the most extreme example.
It enables -Wreserved-macro-identifier which warns about
#define __EXTENSIONS__ 1 because it begins with two underscores.
It's possible to write a test file that passes -Weverything but
it becomes impossible when Autoconf inserts confdefs.h.
So this commit adds AC_LANG_SOURCE to silence Autoconf warnings.
A different solution is needed for -Werror tests.
When the compiler supports __attribute__((__constructor__))
mythread_once() is never used, even with --enable-small. A configuration
with win95 threads and --enable-small will compile and be thread safe so
it can be allowed.
This isn't a very common configuration since MSVC does not support
__attribute__((__constructor__)), but MINGW32 and CLANG32 environments
for MSYS2 can use win95 threads and have
__attribute__((__constructor__)) support.
This makes no functional difference in the generated configure
(at least with the Autotools versions I have installed) but this
change might prevent future bugs like the one that was just
fixed in the commit 5a5bd7f871.
This is broken in the releases 5.2.6 to 5.4.2. A workaround
for these releases is to pass EGREP='grep -E' as an argument
to configure in addition to --disable-threads.
The problem appeared when m4/ax_pthread.m4 was updated in
the commit 6629ed929c which
introduced the use of AC_EGREP_CPP. AC_EGREP_CPP calls
AC_REQUIRE([AC_PROG_EGREP]) to set the shell variable EGREP
but this was only executed if POSIX threads were enabled.
Libtool code also has AC_REQUIRE([AC_PROG_EGREP]) but Autoconf
omits it as AC_PROG_EGREP has already been required earlier.
Thus, if not using POSIX threads, the shell variable EGREP
would be undefined in the Libtool code in configure.
ax_pthread.m4 is fine. The bug was in configure.ac which called
AX_PTHREAD conditionally in an incorrect way. Using AS_CASE
ensures that all AC_REQUIREs get always run.
Thanks to Frank Busse for reporting the bug.
Fixes: https://github.com/tukaani-project/xz/issues/45
Instead of having Doxyfile.in configured by Autoconf, the Doxyfile
can have the tags that need to be configured piped into the doxygen
command through stdin with the overrides after Doxyfile's contents.
Going forward, the documentation should be generated in two different
modes: liblzma or internal.
liblzma is useful for most users. It is the documentation for just
the liblzma API header files. This is the default.
internal is for people who want to understand how xz and liblzma work.
It might be useful for people who want to contribute to the project.
On MicroBlaze, GCC 12 is broken in sense that
__has_attribute(__symver__) returns true but it still doesn't
support the __symver__ attribute even though the platform is ELF
and symbol versioning is supported if using the traditional
__asm__(".symver ...") method. Avoiding the traditional method is
good because it breaks LTO (-flto) builds with GCC.
See also: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=101766
For now the only extra symbols in liblzma_linux.map are the
compatibility symbols with the patch that spread from RHEL/CentOS 7.
These require the use of __symver__ attribute or __asm__(".symver ...")
in the C code. Compatibility with the patch from CentOS 7 doesn't
seem valuable on MicroBlaze so use liblzma_generic.map on MicroBlaze
instead. It doesn't require anything special in the C code and thus
no LTO issues either.
An alternative would be to detect support for __symver__
attribute in configure.ac and CMakeLists.txt and fall back
to __asm__(".symver ...") but then LTO would be silently broken
on MicroBlaze. It sounds likely that MicroBlaze is a special
case so let's treat it as a such because that is simpler. If
a similar issue exists on some other platform too then hopefully
someone will report it and this can be reconsidered.
(This doesn't do the same fix in CMakeLists.txt. Perhaps it should
but perhaps CMake build of liblzma doesn't matter much on MicroBlaze.
The problem breaks the build so it's easy to notice and can be fixed
later.)
Thanks to Vincent Fazio for reporting the problem and proposing
a patch (in the end that solution wasn't used):
https://github.com/tukaani-project/xz/pull/32
Doxygen is now configurable in autotools only with
--enable-doxygen=[api|all]. The default is "api", which will only
generate HTML output for liblzma API functions. The LaTex documentation
output was also disabled.
It's not that important. It can be annoying in builds that
disable many features since in those cases the tests programs
will correctly trigger this warning with Clang.
-Wstrict-aliasing was removed from the list since it is enabled
by -Wall already.
A normal build is clean with these on GNU/Linux x86-64 with
GCC 12.2.0 and Clang 14.0.6.
Previously, if threading was enabled HAVE_DECL_CLOCK_MONOTONIC would always
be set to 0 or 1. However, this macro was needed in xz so if xz was not
built with threading and HAVE_DECL_CLOCK_MONOTONIC was not defined but
HAVE_CLOCK_GETTIME was, it caused a warning during build. Now,
HAVE_DECL_CLOCK_MONOTONIC has been renamed to HAVE_CLOCK_MONOTONIC and
will only be set if it is 1.
It not only makes no sense to put symbol versions into a static library
but it can also cause breakage.
By default Libtool #defines PIC if building a shared library and
doesn't define it for static libraries. This is documented in the
Libtool manual. It can be overriden using --with-pic or --without-pic.
configure.ac detects if --with-pic or --without-pic is used and then
gives an error if neither --disable-shared nor --disable-static was
used at the same time. Thus, in normal situations it works to build
both shared and static library at the same time on GNU/Linux,
only --with-pic or --without-pic requires that only one type of
library is built.
Thanks to John Paul Adrian Glaubitz from Debian for reporting
the problem that occurred on ia64:
https://www.mail-archive.com/xz-devel@tukaani.org/msg00610.html
It also works on E2K as it supports these intrinsics.
On x86-64 runtime detection is used so the code keeps working on
older processors too. A CLMUL-only build can be done by using
-msse4.1 -mpclmul in CFLAGS and this will reduce the library
size since the generic implementation and its 8 KiB lookup table
will be omitted.
On 32-bit x86 this isn't used by default for now because by default
on 32-bit x86 the separate assembly file crc64_x86.S is used.
If --disable-assembler is used then this new CLMUL code is used
the same way as on 64-bit x86. However, a CLMUL-only build
(-msse4.1 -mpclmul) won't omit the 8 KiB lookup table on
32-bit x86 due to a currently-missing check for disabled
assembler usage.
The configure.ac check should be such that the code won't be
built if something in the toolchain doesn't support it but
--disable-clmul-crc option can be used to unconditionally
disable this feature.
CLMUL speeds up decompression of files that have compressed very
well (assuming CRC64 is used as a check type). It is know that
the CLMUL code is significantly slower than the generic code for
tiny inputs (especially 1-8 bytes but up to 16 bytes). If that
is a real-world problem then there is already a commented-out
variant that uses the generic version for small inputs.
Thanks to Ilya Kurdyukov for the original patch which was
derived from a white paper from Intel [1] (published in 2009)
and public domain code from [2] (released in 2016).
[1] https://www.intel.com/content/dam/www/public/us/en/documents/white-papers/fast-crc-computation-generic-polynomials-pclmulqdq-paper.pdf
[2] https://github.com/rawrunprotected/crc
It didn't do anything. There are only 32-bit x86 assembly files
and it feels likely that new files won't be added as intrinsics
in C are more portable across toolchains and OSes.
This uses it for CRC table initializations when using --disable-small.
It avoids mythread_once() overhead. It also means that then
--disable-small --disable-threads is thread-safe if this attribute
is supported.
Support for format version 0 was removed from lzip 1.18 for some
reason. .lz format version 0 files are rare (and old) but some
source packages were released in this format, and some people might
have personal files in this format too. It's very little extra code
to support it along side format version 1 so this commits adds
support for both.
The Sync Flush marker extentension to the original .lz format
version 1 isn't supported. It would require changes to the
LZMA decoder itself. Such files are very rare anyway.
See the API doc for lzma_lzip_decoder() for more details about
the .lz format support.
Thanks to Michał Górny for the original patch.
We require Autoconf >= 2.69 and that has AC_CONFIG_HEADERS.
There is a warning about AC_PROG_CC_C99 being obsolete but
it cannot be removed because it is needed with Autoconf 2.69.
MicroLZMA was made for EROFS and used by erofs-utils.
It might be used by something else in the future but
those wanting a smaller build for specific situations
can now disable this rarely-needed feature.
That is, the Filter ID will be changed once the design is final.
The current version will be removed. So files created with the
tempoary Filter ID won't be supported in the future.
RHEL/CentOS 7 shipped with 5.1.2alpha, including the threaded
encoder that is behind #ifdef LZMA_UNSTABLE in the API headers.
In 5.1.2alpha these symbols are under XZ_5.1.2alpha in liblzma.map.
API/ABI compatibility tracking isn't done between development
releases so newer releases didn't have XZ_5.1.2alpha anymore.
Later RHEL/CentOS 7 updated xz to 5.2.2 but they wanted to keep
the exported symbols compatible with 5.1.2alpha. After checking
the ABI changes it turned out that >= 5.2.0 ABI is backward
compatible with the threaded encoder functions from 5.1.2alpha
(but not vice versa as fixes and extensions to these functions
were made between 5.1.2alpha and 5.2.0).
In RHEL/CentOS 7, XZ Utils 5.2.2 was patched with
xz-5.2.2-compat-libs.patch to modify liblzma.map:
- XZ_5.1.2alpha was added with lzma_stream_encoder_mt and
lzma_stream_encoder_mt_memusage. This matched XZ Utils 5.1.2alpha.
- XZ_5.2 was replaced with XZ_5.2.2. It is clear that this was
an error; the intention was to keep using XZ_5.2 (XZ_5.2.2
has never been used in XZ Utils). So XZ_5.2.2 lists all
symbols that were listed under XZ_5.2 before the patch.
lzma_stream_encoder_mt and _mt_memusage are included too so
they are listed both here and under XZ_5.1.2alpha.
The patch didn't add any __asm__(".symver ...") lines to the .c
files. Thus the resulting liblzma.so exports the threaded encoder
functions under XZ_5.1.2alpha only. Listing the two functions
also under XZ_5.2.2 in liblzma.map has no effect without
matching .symver lines.
The lack of XZ_5.2 in RHEL/CentOS 7 means that binaries linked
against unpatched XZ Utils 5.2.x won't run on RHEL/CentOS 7.
This is unfortunate but this alone isn't too bad as the problem
is contained within RHEL/CentOS 7 and doesn't affect users
of other distributions. It could also be fixed internally in
RHEL/CentOS 7.
The second problem is more serious: In XZ Utils 5.2.2 the API
headers don't have #ifdef LZMA_UNSTABLE for obvious reasons.
This is true in RHEL/CentOS 7 version too. Thus now programs
using new APIs can be compiled without an extra #define. However,
the programs end up depending on symbol version XZ_5.1.2alpha
(and possibly also XZ_5.2.2) instead of XZ_5.2 as they would
with an unpatched XZ Utils 5.2.2. This means that such binaries
won't run on other distributions shipping XZ Utils >= 5.2.0 as
they don't provide XZ_5.1.2alpha or XZ_5.2.2; they only provide
XZ_5.2 (and XZ_5.0). (This includes RHEL/CentOS 8 as the patch
luckily isn't included there anymore with XZ Utils 5.2.4.)
Binaries built by RHEL/CentOS 7 users get distributed and then
people wonder why they don't run on some other distribution.
Seems that people have found out about the patch and been copying
it to some build scripts, seemingly curing the symptoms but
actually spreading the illness further and outside RHEL/CentOS 7.
The ill patch seems to be from late 2016 (RHEL 7.3) and in 2017 it
had spread at least to EasyBuild. I heard about the events only
recently. :-(
This commit splits liblzma.map into two versions: one for
GNU/Linux and another for other OSes that can use symbol versioning
(FreeBSD, Solaris, maybe others). The Linux-specific file and the
matching additions to .c files add full compatibility with binaries
that have been built against a RHEL/CentOS-patched liblzma. Builds
for OSes other than GNU/Linux won't get the vaccine as they should
be immune to the problem (I really hope that no build script uses
the RHEL/CentOS 7 patch outside GNU/Linux).
The RHEL/CentOS compatibility symbols XZ_5.1.2alpha and XZ_5.2.2
are intentionally put *after* XZ_5.2 in liblzma_linux.map. This way
if one forgets to #define HAVE_SYMBOL_VERSIONS_LINUX when building,
the resulting liblzma.so.5 will have lzma_stream_encoder_mt@@XZ_5.2
since XZ_5.2 {...} is the first one that lists that function.
Without HAVE_SYMBOL_VERSIONS_LINUX @XZ_5.1.2alpha and @XZ_5.2.2
will be missing but that's still a minor problem compared to
only having lzma_stream_encoder_mt@@XZ_5.1.2alpha!
The "local: *;" line was moved to XZ_5.0 so that it doesn't need
to be moved around. It doesn't matter where it is put.
Having two similar liblzma_*.map files is a bit silly as it is,
at least for now, easily possible to generate the generic one
from the Linux-specific file. But that adds extra steps and
increases the risk of mistakes when supporting more than one
build system. So I rather maintain two files in parallel and let
validate_map.sh check that they are in sync when "make mydist"
is run.
This adds .symver lines for lzma_stream_encoder_mt@XZ_5.2.2 and
lzma_stream_encoder_mt_memusage@XZ_5.2.2 even though these
weren't exported by RHEL/CentOS 7 (only @@XZ_5.1.2alpha was
for these two). I added these anyway because someone might
misunderstand the RHEL/CentOS 7 patch and think that @XZ_5.2.2
(@@XZ_5.2.2) versions were exported too.
At glance one could suggest using __typeof__ to copy the function
prototypes when making aliases. However, this doesn't work trivially
because __typeof__ won't copy attributes (lzma_nothrow, lzma_pure)
and it won't change symbol visibility from hidden to default (done
by LZMA_API()). Attributes could be copied with __copy__ attribute
but that needs GCC 9 and a fallback method would be needed anyway.
This uses __symver__ attribute with GCC >= 10 and
__asm__(".symver ...") with everything else. The attribute method
is required for LTO (-flto) support with GCC. Using -flto with
GCC older than 10 is now broken on GNU/Linux and will not be fixed
(can silently result in a broken liblzma build that has dangerously
incorrect symbol versions). LTO builds with Clang seem to work
with the traditional __asm__(".symver ...") method.
Thanks to Boud Roukema for reporting the problem and discussing
the details and testing the fix.
It has been the default for quite some time already and
the old serial harness isn't discouraged. The downside is
that with parallel tests one cannot print progress info or
other diagnostics to the terminal; all output from the tests
will be in the log files only. But now that the compression
tests are separated the parallel tests will speed things up.
There is no specific reason for this other than blocking
the most ancient versions. These are still old:
Autoconf 2.69 (2012)
Automake 1.12 (2012)
gettext 0.19.6 (2015)
Libtool 2.4 (2010)
This bumps the version requirement from 0.19 (from 2014) to
0.19.6 (2015).
Using only the old AM_GNU_GETTEXT_VERSION results in old
gettext infrastructure being placed in the package. By using
both macros we get the latest gettext files while the other
programs in the Autotools family can still see the old macro.
I don't know if the problem is in gnulib's gl_POSIX_SHELL macro
or if xzgrep does something that isn't in POSIX. The workaround
adds a special case for Solaris: if /usr/xpg4/bin/sh exists and
gl_cv_posix_shell wasn't overriden on the configure command line,
use that shell for xzgrep and other scripts. That shell is known
to work and exists on most Solaris systems.
This adds a configure option --enable-path-for-scripts=PREFIX
which defaults to empty except on Solaris it is /usr/xpg4/bin
to make POSIX grep and others available. The Solaris case had
been documented in INSTALL with a manual fix but it's better
to do this automatically since it is needed on most Solaris
systems anyway.
Thanks to Daniel Richard G.
