From 1817d20ed3c4de3ad07a5fc34e27f92bfdfb7c38 Mon Sep 17 00:00:00 2001 From: J Reece Wilson Date: Fri, 25 Sep 2020 17:14:55 +0100 Subject: [PATCH] Remove unnecessary trash from LTS repo --- .appveyor.yml | 69 - .travis.yml | 41 - INSTALL | 465 - Makefile.am | 392 - Makefile.in | 2420 --- aclocal.m4 | 1196 -- autogen.sh | 225 - ci/ci_autotools.sh | 80 - ci/ci_cmake.sh | 114 - ci/ci_legacy.sh | 100 - compile | 348 - config.guess | 1476 -- config.sub | 1801 -- configure | 16116 ---------------- contrib/README.txt | 5 - contrib/arm-neon/README | 83 - contrib/arm-neon/android-ndk.c | 39 - contrib/arm-neon/linux-auxv.c | 120 - contrib/arm-neon/linux.c | 161 - contrib/conftest/README | 49 - contrib/conftest/pngcp.dfa | 57 - contrib/conftest/read.dfa | 58 - contrib/conftest/s_read.dfa | 35 - contrib/conftest/s_write.dfa | 33 - contrib/conftest/simple.dfa | 36 - contrib/conftest/write.dfa | 45 - contrib/examples/README.txt | 24 - contrib/examples/iccfrompng.c | 185 - contrib/examples/pngpixel.c | 371 - contrib/examples/pngtopng.c | 98 - contrib/examples/simpleover.c | 648 - contrib/gregbook/COPYING | 340 - contrib/gregbook/LICENSE | 50 - contrib/gregbook/Makefile.mingw32 | 131 - contrib/gregbook/Makefile.sgi | 105 - contrib/gregbook/Makefile.unx | 134 - contrib/gregbook/Makefile.w32 | 114 - contrib/gregbook/README | 186 - contrib/gregbook/makevms.com | 132 - contrib/gregbook/readpng.c | 323 - contrib/gregbook/readpng.h | 88 - contrib/gregbook/readpng2.c | 521 - contrib/gregbook/readpng2.h | 116 - contrib/gregbook/readppm.c | 188 - contrib/gregbook/rpng-win.c | 735 - contrib/gregbook/rpng-x.c | 911 - contrib/gregbook/rpng2-win.c | 1261 -- contrib/gregbook/rpng2-x.c | 2143 -- contrib/gregbook/toucan.png | Bin 12901 -> 0 bytes contrib/gregbook/wpng.c | 865 - contrib/gregbook/writepng.c | 401 - contrib/gregbook/writepng.h | 133 - contrib/libtests/fakepng.c | 65 - contrib/libtests/gentests.sh | 102 - contrib/libtests/makepng.c | 1941 -- contrib/libtests/pngimage.c | 1712 -- contrib/libtests/pngstest-errors.h | 165 - contrib/libtests/pngstest.c | 3828 ---- contrib/libtests/pngunknown.c | 1294 -- contrib/libtests/pngvalid.c | 12231 ------------ contrib/libtests/readpng.c | 115 - contrib/libtests/tarith.c | 999 - contrib/libtests/timepng.c | 608 - contrib/mips-msa/README | 83 - contrib/mips-msa/linux.c | 67 - contrib/oss-fuzz/Dockerfile | 25 - contrib/oss-fuzz/README.txt | 37 - contrib/oss-fuzz/build.sh | 51 - contrib/oss-fuzz/libpng_read_fuzzer.cc | 209 - contrib/oss-fuzz/libpng_read_fuzzer.options | 2 - contrib/oss-fuzz/png.dict | 39 - contrib/pngminim/README | 5 - contrib/pngminim/decoder/README | 10 - contrib/pngminim/decoder/makefile | 151 - contrib/pngminim/decoder/pngusr.dfa | 40 - contrib/pngminim/decoder/pngusr.h | 23 - contrib/pngminim/encoder/README | 10 - contrib/pngminim/encoder/makefile | 150 - contrib/pngminim/encoder/pngusr.dfa | 39 - contrib/pngminim/encoder/pngusr.h | 23 - contrib/pngminim/preader/README | 15 - contrib/pngminim/preader/makefile | 166 - contrib/pngminim/preader/pngusr.dfa | 40 - contrib/pngminim/preader/pngusr.h | 23 - contrib/pngminus/CHANGES.txt | 13 - contrib/pngminus/CMakeLists.txt | 24 - contrib/pngminus/LICENSE.txt | 22 - contrib/pngminus/Makefile | 62 - contrib/pngminus/README.txt | 120 - contrib/pngminus/makevms.com | 92 - contrib/pngminus/png2pnm.bat | 41 - contrib/pngminus/png2pnm.c | 427 - contrib/pngminus/png2pnm.sh | 42 - contrib/pngminus/pngminus.bat | 4 - contrib/pngminus/pngminus.sh | 5 - contrib/pngminus/pnm2png.bat | 41 - contrib/pngminus/pnm2png.c | 620 - contrib/pngminus/pnm2png.sh | 42 - contrib/pngsuite/README | 107 - .../pngsuite/bad_interlace_conversions.txt | 9 - contrib/pngsuite/basn0g01.png | Bin 164 -> 0 bytes contrib/pngsuite/basn0g02.png | Bin 104 -> 0 bytes contrib/pngsuite/basn0g04.png | Bin 145 -> 0 bytes contrib/pngsuite/basn0g08.png | Bin 138 -> 0 bytes contrib/pngsuite/basn0g16.png | Bin 167 -> 0 bytes contrib/pngsuite/basn2c08.png | Bin 145 -> 0 bytes contrib/pngsuite/basn2c16.png | Bin 302 -> 0 bytes contrib/pngsuite/basn3p01.png | Bin 112 -> 0 bytes contrib/pngsuite/basn3p02.png | Bin 146 -> 0 bytes contrib/pngsuite/basn3p04.png | Bin 216 -> 0 bytes contrib/pngsuite/basn3p08.png | Bin 1286 -> 0 bytes contrib/pngsuite/basn4a08.png | Bin 126 -> 0 bytes contrib/pngsuite/basn4a16.png | Bin 2206 -> 0 bytes contrib/pngsuite/basn6a08.png | Bin 184 -> 0 bytes contrib/pngsuite/basn6a16.png | Bin 3435 -> 0 bytes contrib/pngsuite/ftbbn0g01.png | Bin 176 -> 0 bytes contrib/pngsuite/ftbbn0g02.png | Bin 197 -> 0 bytes contrib/pngsuite/ftbbn0g04.png | Bin 429 -> 0 bytes contrib/pngsuite/ftbbn2c16.png | Bin 2041 -> 0 bytes contrib/pngsuite/ftbbn3p08.png | Bin 1499 -> 0 bytes contrib/pngsuite/ftbgn2c16.png | Bin 2041 -> 0 bytes contrib/pngsuite/ftbgn3p08.png | Bin 1499 -> 0 bytes contrib/pngsuite/ftbrn2c08.png | Bin 1633 -> 0 bytes contrib/pngsuite/ftbwn0g16.png | Bin 1313 -> 0 bytes contrib/pngsuite/ftbwn3p08.png | Bin 1496 -> 0 bytes contrib/pngsuite/ftbyn3p08.png | Bin 1499 -> 0 bytes contrib/pngsuite/ftp0n0g08.png | Bin 719 -> 0 bytes contrib/pngsuite/ftp0n2c08.png | Bin 1594 -> 0 bytes contrib/pngsuite/ftp0n3p08.png | Bin 1476 -> 0 bytes contrib/pngsuite/ftp1n3p08.png | Bin 1483 -> 0 bytes contrib/pngsuite/ibasn0g08.png | Bin 237 -> 0 bytes contrib/pngsuite/ibasn0g16.png | Bin 274 -> 0 bytes contrib/pngsuite/ibasn2c08.png | Bin 299 -> 0 bytes contrib/pngsuite/ibasn2c16.png | Bin 558 -> 0 bytes contrib/pngsuite/ibasn3p08.png | Bin 1492 -> 0 bytes contrib/pngsuite/ibasn4a08.png | Bin 198 -> 0 bytes contrib/pngsuite/ibasn4a16.png | Bin 2839 -> 0 bytes contrib/pngsuite/ibasn6a08.png | Bin 339 -> 0 bytes contrib/pngsuite/ibasn6a16.png | Bin 4164 -> 0 bytes contrib/pngsuite/iftbbn2c16.png | Bin 2624 -> 0 bytes contrib/pngsuite/iftbbn3p08.png | Bin 1507 -> 0 bytes contrib/pngsuite/iftbgn2c16.png | Bin 2624 -> 0 bytes contrib/pngsuite/iftbgn3p08.png | Bin 1507 -> 0 bytes contrib/pngsuite/iftbrn2c08.png | Bin 1624 -> 0 bytes contrib/pngsuite/iftbwn0g16.png | Bin 1448 -> 0 bytes contrib/pngsuite/iftbwn3p08.png | Bin 1507 -> 0 bytes contrib/pngsuite/iftbyn3p08.png | Bin 1507 -> 0 bytes contrib/pngsuite/iftp0n0g08.png | Bin 847 -> 0 bytes contrib/pngsuite/iftp0n2c08.png | Bin 2020 -> 0 bytes contrib/pngsuite/iftp0n3p08.png | Bin 1495 -> 0 bytes contrib/pngsuite/iftp1n3p08.png | Bin 1507 -> 0 bytes contrib/pngsuite/interlaced/README | 2 - contrib/pngsuite/interlaced/ibasn0g01.png | Bin 201 -> 0 bytes contrib/pngsuite/interlaced/ibasn0g02.png | Bin 138 -> 0 bytes contrib/pngsuite/interlaced/ibasn0g04.png | Bin 231 -> 0 bytes contrib/pngsuite/interlaced/ibasn3p01.png | Bin 116 -> 0 bytes contrib/pngsuite/interlaced/ibasn3p02.png | Bin 163 -> 0 bytes contrib/pngsuite/interlaced/ibasn3p04.png | Bin 288 -> 0 bytes contrib/pngsuite/interlaced/iftbbn0g01.png | Bin 214 -> 0 bytes contrib/pngsuite/interlaced/iftbbn0g02.png | Bin 211 -> 0 bytes contrib/pngsuite/interlaced/iftbbn0g04.png | Bin 489 -> 0 bytes contrib/powerpc-vsx/README | 81 - contrib/powerpc-vsx/linux.c | 57 - contrib/powerpc-vsx/linux_aux.c | 34 - contrib/testpngs/crashers/bad_iCCP.png | Bin 321 -> 0 bytes contrib/testpngs/crashers/badadler.png | Bin 67 -> 0 bytes contrib/testpngs/crashers/badcrc.png | Bin 67 -> 0 bytes .../crashers/empty_ancillary_chunks.png | Bin 730 -> 0 bytes contrib/testpngs/crashers/huge_IDAT.png | Bin 79 -> 0 bytes contrib/testpngs/crashers/huge_bKGD_chunk.png | Bin 57 -> 0 bytes contrib/testpngs/crashers/huge_cHRM_chunk.png | Bin 57 -> 0 bytes contrib/testpngs/crashers/huge_eXIf_chunk.png | Bin 57 -> 0 bytes contrib/testpngs/crashers/huge_gAMA_chunk.png | Bin 57 -> 0 bytes contrib/testpngs/crashers/huge_hIST_chunk.png | Bin 57 -> 0 bytes contrib/testpngs/crashers/huge_iCCP_chunk.png | Bin 57 -> 0 bytes contrib/testpngs/crashers/huge_iTXt_chunk.png | Bin 57 -> 0 bytes .../crashers/huge_juNK_unsafe_to_copy.png | Bin 57 -> 0 bytes .../crashers/huge_juNk_safe_to_copy.png | Bin 57 -> 0 bytes contrib/testpngs/crashers/huge_pCAL_chunk.png | Bin 57 -> 0 bytes contrib/testpngs/crashers/huge_pHYs_chunk.png | Bin 57 -> 0 bytes contrib/testpngs/crashers/huge_sCAL_chunk.png | Bin 57 -> 0 bytes contrib/testpngs/crashers/huge_sPLT_chunk.png | Bin 57 -> 0 bytes contrib/testpngs/crashers/huge_sRGB_chunk.png | Bin 57 -> 0 bytes contrib/testpngs/crashers/huge_sTER_chunk.png | Bin 57 -> 0 bytes contrib/testpngs/crashers/huge_tEXt_chunk.png | Bin 57 -> 0 bytes contrib/testpngs/crashers/huge_tIME_chunk.png | Bin 57 -> 0 bytes contrib/testpngs/crashers/huge_zTXt_chunk.png | Bin 57 -> 0 bytes contrib/testpngs/gray-1-1.8-tRNS.png | Bin 325 -> 0 bytes contrib/testpngs/gray-1-1.8.png | Bin 311 -> 0 bytes contrib/testpngs/gray-1-linear-tRNS.png | Bin 325 -> 0 bytes contrib/testpngs/gray-1-linear.png | Bin 311 -> 0 bytes contrib/testpngs/gray-1-sRGB-tRNS.png | Bin 278 -> 0 bytes contrib/testpngs/gray-1-sRGB.png | Bin 264 -> 0 bytes contrib/testpngs/gray-1-tRNS.png | Bin 265 -> 0 bytes contrib/testpngs/gray-1.png | Bin 251 -> 0 bytes contrib/testpngs/gray-16-1.8-tRNS.png | Bin 744 -> 0 bytes contrib/testpngs/gray-16-1.8.png | Bin 744 -> 0 bytes contrib/testpngs/gray-16-linear-tRNS.png | Bin 744 -> 0 bytes contrib/testpngs/gray-16-linear.png | Bin 744 -> 0 bytes contrib/testpngs/gray-16-sRGB-tRNS.png | Bin 697 -> 0 bytes contrib/testpngs/gray-16-sRGB.png | Bin 697 -> 0 bytes contrib/testpngs/gray-16-tRNS.png | Bin 684 -> 0 bytes contrib/testpngs/gray-16.png | Bin 684 -> 0 bytes contrib/testpngs/gray-2-1.8-tRNS.png | Bin 325 -> 0 bytes contrib/testpngs/gray-2-1.8.png | Bin 311 -> 0 bytes contrib/testpngs/gray-2-linear-tRNS.png | Bin 325 -> 0 bytes contrib/testpngs/gray-2-linear.png | Bin 311 -> 0 bytes contrib/testpngs/gray-2-sRGB-tRNS.png | Bin 278 -> 0 bytes contrib/testpngs/gray-2-sRGB.png | Bin 264 -> 0 bytes contrib/testpngs/gray-2-tRNS.png | Bin 265 -> 0 bytes contrib/testpngs/gray-2.png | Bin 251 -> 0 bytes contrib/testpngs/gray-4-1.8-tRNS.png | Bin 327 -> 0 bytes contrib/testpngs/gray-4-1.8.png | Bin 313 -> 0 bytes contrib/testpngs/gray-4-linear-tRNS.png | Bin 327 -> 0 bytes contrib/testpngs/gray-4-linear.png | Bin 313 -> 0 bytes contrib/testpngs/gray-4-sRGB-tRNS.png | Bin 280 -> 0 bytes contrib/testpngs/gray-4-sRGB.png | Bin 266 -> 0 bytes contrib/testpngs/gray-4-tRNS.png | Bin 267 -> 0 bytes contrib/testpngs/gray-4.png | Bin 253 -> 0 bytes contrib/testpngs/gray-8-1.8-tRNS.png | Bin 327 -> 0 bytes contrib/testpngs/gray-8-1.8.png | Bin 313 -> 0 bytes contrib/testpngs/gray-8-linear-tRNS.png | Bin 327 -> 0 bytes contrib/testpngs/gray-8-linear.png | Bin 313 -> 0 bytes contrib/testpngs/gray-8-sRGB-tRNS.png | Bin 280 -> 0 bytes contrib/testpngs/gray-8-sRGB.png | Bin 266 -> 0 bytes contrib/testpngs/gray-8-tRNS.png | Bin 267 -> 0 bytes contrib/testpngs/gray-8.png | Bin 253 -> 0 bytes contrib/testpngs/gray-alpha-16-1.8.png | Bin 919 -> 0 bytes contrib/testpngs/gray-alpha-16-linear.png | Bin 919 -> 0 bytes contrib/testpngs/gray-alpha-16-sRGB.png | Bin 872 -> 0 bytes contrib/testpngs/gray-alpha-16.png | Bin 859 -> 0 bytes contrib/testpngs/gray-alpha-8-1.8.png | Bin 744 -> 0 bytes contrib/testpngs/gray-alpha-8-linear.png | Bin 744 -> 0 bytes contrib/testpngs/gray-alpha-8-sRGB.png | Bin 697 -> 0 bytes contrib/testpngs/gray-alpha-8.png | Bin 684 -> 0 bytes contrib/testpngs/makepngs.sh | 94 - contrib/testpngs/palette-1-1.8-tRNS.png | Bin 342 -> 0 bytes contrib/testpngs/palette-1-1.8.png | Bin 329 -> 0 bytes contrib/testpngs/palette-1-linear-tRNS.png | Bin 342 -> 0 bytes contrib/testpngs/palette-1-linear.png | Bin 329 -> 0 bytes contrib/testpngs/palette-1-sRGB-tRNS.png | Bin 295 -> 0 bytes contrib/testpngs/palette-1-sRGB.png | Bin 282 -> 0 bytes contrib/testpngs/palette-1-tRNS.png | Bin 282 -> 0 bytes contrib/testpngs/palette-1.png | Bin 269 -> 0 bytes contrib/testpngs/palette-2-1.8-tRNS.png | Bin 350 -> 0 bytes contrib/testpngs/palette-2-1.8.png | Bin 335 -> 0 bytes contrib/testpngs/palette-2-linear-tRNS.png | Bin 350 -> 0 bytes contrib/testpngs/palette-2-linear.png | Bin 335 -> 0 bytes contrib/testpngs/palette-2-sRGB-tRNS.png | Bin 303 -> 0 bytes contrib/testpngs/palette-2-sRGB.png | Bin 288 -> 0 bytes contrib/testpngs/palette-2-tRNS.png | Bin 290 -> 0 bytes contrib/testpngs/palette-2.png | Bin 275 -> 0 bytes contrib/testpngs/palette-4-1.8-tRNS.png | Bin 400 -> 0 bytes contrib/testpngs/palette-4-1.8.png | Bin 373 -> 0 bytes contrib/testpngs/palette-4-linear-tRNS.png | Bin 400 -> 0 bytes contrib/testpngs/palette-4-linear.png | Bin 373 -> 0 bytes contrib/testpngs/palette-4-sRGB-tRNS.png | Bin 353 -> 0 bytes contrib/testpngs/palette-4-sRGB.png | Bin 326 -> 0 bytes contrib/testpngs/palette-4-tRNS.png | Bin 340 -> 0 bytes contrib/testpngs/palette-4.png | Bin 313 -> 0 bytes contrib/testpngs/palette-8-1.8-tRNS.png | Bin 1360 -> 0 bytes contrib/testpngs/palette-8-1.8.png | Bin 1093 -> 0 bytes contrib/testpngs/palette-8-linear-tRNS.png | Bin 1360 -> 0 bytes contrib/testpngs/palette-8-linear.png | Bin 1093 -> 0 bytes contrib/testpngs/palette-8-sRGB-tRNS.png | Bin 1313 -> 0 bytes contrib/testpngs/palette-8-sRGB.png | Bin 1046 -> 0 bytes contrib/testpngs/palette-8-tRNS.png | Bin 1300 -> 0 bytes contrib/testpngs/palette-8.png | Bin 1033 -> 0 bytes contrib/testpngs/rgb-16-1.8-tRNS.png | Bin 1211 -> 0 bytes contrib/testpngs/rgb-16-1.8.png | Bin 1211 -> 0 bytes contrib/testpngs/rgb-16-linear-tRNS.png | Bin 1211 -> 0 bytes contrib/testpngs/rgb-16-linear.png | Bin 1211 -> 0 bytes contrib/testpngs/rgb-16-sRGB-tRNS.png | Bin 1164 -> 0 bytes contrib/testpngs/rgb-16-sRGB.png | Bin 1164 -> 0 bytes contrib/testpngs/rgb-16-tRNS.png | Bin 1151 -> 0 bytes contrib/testpngs/rgb-16.png | Bin 1151 -> 0 bytes contrib/testpngs/rgb-8-1.8-tRNS.png | Bin 837 -> 0 bytes contrib/testpngs/rgb-8-1.8.png | Bin 819 -> 0 bytes contrib/testpngs/rgb-8-linear-tRNS.png | Bin 837 -> 0 bytes contrib/testpngs/rgb-8-linear.png | Bin 819 -> 0 bytes contrib/testpngs/rgb-8-sRGB-tRNS.png | Bin 790 -> 0 bytes contrib/testpngs/rgb-8-sRGB.png | Bin 772 -> 0 bytes contrib/testpngs/rgb-8-tRNS.png | Bin 777 -> 0 bytes contrib/testpngs/rgb-8.png | Bin 759 -> 0 bytes contrib/testpngs/rgb-alpha-16-1.8.png | Bin 1437 -> 0 bytes contrib/testpngs/rgb-alpha-16-linear.png | Bin 1437 -> 0 bytes contrib/testpngs/rgb-alpha-16-sRGB.png | Bin 1390 -> 0 bytes contrib/testpngs/rgb-alpha-16.png | Bin 1377 -> 0 bytes contrib/testpngs/rgb-alpha-8-1.8.png | Bin 919 -> 0 bytes contrib/testpngs/rgb-alpha-8-linear.png | Bin 919 -> 0 bytes contrib/testpngs/rgb-alpha-8-sRGB.png | Bin 872 -> 0 bytes contrib/testpngs/rgb-alpha-8.png | Bin 859 -> 0 bytes contrib/tools/README.txt | 27 - contrib/tools/checksum-icc.c | 102 - contrib/tools/chkfmt | 144 - contrib/tools/cvtcolor.c | 188 - contrib/tools/genpng.c | 881 - contrib/tools/intgamma.sh | 110 - contrib/tools/makesRGB.c | 430 - contrib/tools/png-fix-itxt.c | 164 - contrib/tools/pngcp.c | 2453 --- contrib/tools/pngfix.c | 4049 ---- contrib/tools/reindent | 25 - contrib/tools/sRGB.h | 48 - contrib/visupng/PngFile.c | 454 - contrib/visupng/PngFile.h | 30 - contrib/visupng/README.txt | 61 - contrib/visupng/VisualPng.c | 978 - contrib/visupng/VisualPng.dsp | 147 - contrib/visupng/VisualPng.dsw | 29 - contrib/visupng/VisualPng.ico | Bin 766 -> 0 bytes contrib/visupng/VisualPng.png | Bin 208 -> 0 bytes contrib/visupng/VisualPng.rc | 152 - contrib/visupng/cexcept.h | 248 - contrib/visupng/resource.h | 23 - depcomp | 791 - example.c | 1041 - install-sh | 518 - libpng-manual.txt | 5410 +----- libpng.3 | 6052 ------ libpng.pc.in | 12 - libpngpf.3 | 24 - ltmain.sh | 11147 ----------- missing | 215 - png.5 | 84 - pngbar.jpg | Bin 2498 -> 0 bytes pngbar.png | Bin 2399 -> 0 bytes scripts/pnglibconf.h.prebuilt => pnglibconf.h | 2 +- pngnow.png | Bin 2069 -> 0 bytes pngtest.c | 2158 --- pngtest.png | Bin 8759 -> 0 bytes pngusr.dfa | 14 - projects/owatcom/libpng.tgt | 383 - projects/owatcom/libpng.wpj | 112 - projects/owatcom/pngconfig.mak | 160 - projects/owatcom/pngstest.tgt | 219 - projects/owatcom/pngtest.tgt | 179 - projects/owatcom/pngvalid.tgt | 210 - projects/visualc71/PRJ0041.mak | 21 - projects/visualc71/README.txt | 58 - projects/visualc71/README_zlib.txt | 44 - projects/visualc71/libpng.sln | 60 - projects/visualc71/libpng.vcproj | 419 - projects/visualc71/pngtest.vcproj | 267 - projects/visualc71/zlib.vcproj | 391 - projects/vstudio/README.txt | 87 - projects/vstudio/libpng/libpng.vcxproj | 234 - .../vstudio/pnglibconf/pnglibconf.vcxproj | 61 - projects/vstudio/pngstest/pngstest.vcxproj | 219 - projects/vstudio/pngtest/pngtest.vcxproj | 220 - .../vstudio/pngunknown/pngunknown.vcxproj | 219 - projects/vstudio/pngvalid/pngvalid.vcxproj | 219 - projects/vstudio/vstudio.sln | 109 - projects/vstudio/zlib.props | 57 - projects/vstudio/zlib/zlib.vcxproj | 175 - scripts/README.txt | 83 - scripts/SCOPTIONS.ppc | 7 - scripts/checksym.awk | 173 - scripts/descrip.mms | 47 - scripts/dfn.awk | 203 - scripts/genchk.cmake.in | 37 - scripts/genout.cmake.in | 93 - scripts/gensrc.cmake.in | 138 - scripts/intprefix.c | 22 - scripts/libpng-config-body.in | 96 - scripts/libpng-config-head.in | 24 - scripts/libpng.pc.in | 10 - scripts/libtool.m4 | 8369 -------- scripts/ltoptions.m4 | 437 - scripts/ltsugar.m4 | 124 - scripts/ltversion.m4 | 23 - scripts/lt~obsolete.m4 | 99 - scripts/macro.lst | 3 - scripts/makefile.32sunu | 241 - scripts/makefile.64sunu | 241 - scripts/makefile.acorn | 57 - scripts/makefile.aix | 116 - scripts/makefile.amiga | 58 - scripts/makefile.atari | 71 - scripts/makefile.bc32 | 158 - scripts/makefile.beos | 222 - scripts/makefile.cegcc | 116 - scripts/makefile.clang | 87 - scripts/makefile.darwin | 222 - scripts/makefile.dec | 210 - scripts/makefile.dj2 | 72 - scripts/makefile.freebsd | 66 - scripts/makefile.gcc | 87 - scripts/makefile.hp64 | 228 - scripts/makefile.hpgcc | 225 - scripts/makefile.hpux | 226 - scripts/makefile.ibmc | 90 - scripts/makefile.intel | 118 - scripts/makefile.linux | 240 - scripts/makefile.linux-opt | 258 - scripts/makefile.mips | 100 - scripts/makefile.msys | 199 - scripts/makefile.netbsd | 55 - scripts/makefile.openbsd | 86 - scripts/makefile.sco | 223 - scripts/makefile.sggcc | 233 - scripts/makefile.sgi | 234 - scripts/makefile.so9 | 244 - scripts/makefile.solaris | 240 - scripts/makefile.std | 133 - scripts/makefile.sunos | 112 - scripts/makefile.vcwin32 | 112 - scripts/makevms.com | 142 - scripts/options.awk | 898 - scripts/pnglibconf.dfa | 920 - scripts/pnglibconf.mak | 55 - scripts/pngwin.rc | 112 - scripts/prefix.c | 24 - scripts/smakefile.ppc | 34 - scripts/sym.c | 15 - scripts/symbols.c | 58 - scripts/symbols.def | 255 - scripts/test.cmake.in | 31 - scripts/vers.c | 19 - test-driver | 148 - tests/pngimage-full | 2 - tests/pngimage-quick | 2 - tests/pngstest | 54 - tests/pngstest-1.8 | 2 - tests/pngstest-1.8-alpha | 2 - tests/pngstest-linear | 2 - tests/pngstest-linear-alpha | 2 - tests/pngstest-none | 2 - tests/pngstest-none-alpha | 2 - tests/pngstest-sRGB | 2 - tests/pngstest-sRGB-alpha | 2 - tests/pngtest-all | 16 - tests/pngunknown-IDAT | 2 - tests/pngunknown-discard | 2 - tests/pngunknown-if-safe | 2 - tests/pngunknown-sAPI | 2 - tests/pngunknown-sTER | 2 - tests/pngunknown-save | 2 - tests/pngunknown-vpAg | 2 - tests/pngvalid-gamma-16-to-8 | 2 - tests/pngvalid-gamma-alpha-mode | 2 - tests/pngvalid-gamma-background | 2 - tests/pngvalid-gamma-expand16-alpha-mode | 2 - tests/pngvalid-gamma-expand16-background | 2 - tests/pngvalid-gamma-expand16-transform | 2 - tests/pngvalid-gamma-sbit | 2 - tests/pngvalid-gamma-threshold | 2 - tests/pngvalid-gamma-transform | 2 - tests/pngvalid-progressive-interlace-standard | 2 - tests/pngvalid-progressive-size | 2 - tests/pngvalid-progressive-standard | 2 - tests/pngvalid-standard | 2 - tests/pngvalid-transform | 2 - 453 files changed, 2 insertions(+), 122517 deletions(-) delete mode 100644 .appveyor.yml delete mode 100644 .travis.yml delete mode 100644 INSTALL delete mode 100644 Makefile.am delete mode 100644 Makefile.in delete mode 100644 aclocal.m4 delete mode 100755 autogen.sh delete mode 100755 ci/ci_autotools.sh delete mode 100755 ci/ci_cmake.sh delete mode 100755 ci/ci_legacy.sh delete mode 100755 compile delete mode 100755 config.guess delete mode 100755 config.sub delete mode 100755 configure delete mode 100644 contrib/README.txt delete mode 100644 contrib/arm-neon/README delete mode 100644 contrib/arm-neon/android-ndk.c delete mode 100644 contrib/arm-neon/linux-auxv.c delete mode 100644 contrib/arm-neon/linux.c delete mode 100644 contrib/conftest/README delete mode 100644 contrib/conftest/pngcp.dfa delete mode 100644 contrib/conftest/read.dfa delete mode 100644 contrib/conftest/s_read.dfa delete mode 100644 contrib/conftest/s_write.dfa delete mode 100644 contrib/conftest/simple.dfa delete mode 100644 contrib/conftest/write.dfa delete mode 100644 contrib/examples/README.txt delete mode 100644 contrib/examples/iccfrompng.c delete mode 100644 contrib/examples/pngpixel.c delete mode 100644 contrib/examples/pngtopng.c delete mode 100644 contrib/examples/simpleover.c delete mode 100644 contrib/gregbook/COPYING delete mode 100644 contrib/gregbook/LICENSE delete mode 100644 contrib/gregbook/Makefile.mingw32 delete mode 100644 contrib/gregbook/Makefile.sgi delete mode 100644 contrib/gregbook/Makefile.unx delete mode 100644 contrib/gregbook/Makefile.w32 delete mode 100644 contrib/gregbook/README delete mode 100644 contrib/gregbook/makevms.com delete mode 100644 contrib/gregbook/readpng.c delete mode 100644 contrib/gregbook/readpng.h delete mode 100644 contrib/gregbook/readpng2.c delete mode 100644 contrib/gregbook/readpng2.h delete mode 100644 contrib/gregbook/readppm.c delete mode 100644 contrib/gregbook/rpng-win.c delete mode 100644 contrib/gregbook/rpng-x.c delete mode 100644 contrib/gregbook/rpng2-win.c delete mode 100644 contrib/gregbook/rpng2-x.c delete mode 100644 contrib/gregbook/toucan.png delete mode 100644 contrib/gregbook/wpng.c delete mode 100644 contrib/gregbook/writepng.c delete mode 100644 contrib/gregbook/writepng.h delete mode 100644 contrib/libtests/fakepng.c delete mode 100755 contrib/libtests/gentests.sh delete mode 100644 contrib/libtests/makepng.c delete mode 100644 contrib/libtests/pngimage.c delete mode 100644 contrib/libtests/pngstest-errors.h delete mode 100644 contrib/libtests/pngstest.c delete mode 100644 contrib/libtests/pngunknown.c delete mode 100644 contrib/libtests/pngvalid.c delete mode 100644 contrib/libtests/readpng.c delete mode 100644 contrib/libtests/tarith.c delete mode 100644 contrib/libtests/timepng.c delete mode 100644 contrib/mips-msa/README delete mode 100644 contrib/mips-msa/linux.c delete mode 100644 contrib/oss-fuzz/Dockerfile delete mode 100644 contrib/oss-fuzz/README.txt delete mode 100755 contrib/oss-fuzz/build.sh delete mode 100644 contrib/oss-fuzz/libpng_read_fuzzer.cc delete mode 100644 contrib/oss-fuzz/libpng_read_fuzzer.options delete mode 100644 contrib/oss-fuzz/png.dict delete mode 100644 contrib/pngminim/README delete mode 100644 contrib/pngminim/decoder/README delete mode 100644 contrib/pngminim/decoder/makefile delete mode 100644 contrib/pngminim/decoder/pngusr.dfa delete mode 100644 contrib/pngminim/decoder/pngusr.h delete mode 100644 contrib/pngminim/encoder/README delete mode 100644 contrib/pngminim/encoder/makefile delete mode 100644 contrib/pngminim/encoder/pngusr.dfa delete mode 100644 contrib/pngminim/encoder/pngusr.h delete mode 100644 contrib/pngminim/preader/README delete mode 100644 contrib/pngminim/preader/makefile delete mode 100644 contrib/pngminim/preader/pngusr.dfa delete mode 100644 contrib/pngminim/preader/pngusr.h delete mode 100644 contrib/pngminus/CHANGES.txt delete mode 100644 contrib/pngminus/CMakeLists.txt delete mode 100644 contrib/pngminus/LICENSE.txt delete mode 100644 contrib/pngminus/Makefile delete mode 100644 contrib/pngminus/README.txt delete mode 100644 contrib/pngminus/makevms.com delete mode 100755 contrib/pngminus/png2pnm.bat delete mode 100644 contrib/pngminus/png2pnm.c delete mode 100755 contrib/pngminus/png2pnm.sh delete mode 100755 contrib/pngminus/pngminus.bat delete mode 100755 contrib/pngminus/pngminus.sh delete mode 100755 contrib/pngminus/pnm2png.bat delete mode 100644 contrib/pngminus/pnm2png.c delete mode 100755 contrib/pngminus/pnm2png.sh delete mode 100644 contrib/pngsuite/README delete mode 100644 contrib/pngsuite/bad_interlace_conversions.txt delete mode 100644 contrib/pngsuite/basn0g01.png delete mode 100644 contrib/pngsuite/basn0g02.png delete mode 100644 contrib/pngsuite/basn0g04.png delete mode 100644 contrib/pngsuite/basn0g08.png delete mode 100644 contrib/pngsuite/basn0g16.png delete mode 100644 contrib/pngsuite/basn2c08.png delete mode 100644 contrib/pngsuite/basn2c16.png delete mode 100644 contrib/pngsuite/basn3p01.png delete mode 100644 contrib/pngsuite/basn3p02.png delete mode 100644 contrib/pngsuite/basn3p04.png delete mode 100644 contrib/pngsuite/basn3p08.png delete mode 100644 contrib/pngsuite/basn4a08.png delete mode 100644 contrib/pngsuite/basn4a16.png delete mode 100644 contrib/pngsuite/basn6a08.png delete mode 100644 contrib/pngsuite/basn6a16.png delete mode 100644 contrib/pngsuite/ftbbn0g01.png delete mode 100644 contrib/pngsuite/ftbbn0g02.png delete mode 100644 contrib/pngsuite/ftbbn0g04.png delete mode 100644 contrib/pngsuite/ftbbn2c16.png delete mode 100644 contrib/pngsuite/ftbbn3p08.png delete mode 100644 contrib/pngsuite/ftbgn2c16.png delete mode 100644 contrib/pngsuite/ftbgn3p08.png delete mode 100644 contrib/pngsuite/ftbrn2c08.png delete mode 100644 contrib/pngsuite/ftbwn0g16.png delete mode 100644 contrib/pngsuite/ftbwn3p08.png delete mode 100644 contrib/pngsuite/ftbyn3p08.png delete mode 100644 contrib/pngsuite/ftp0n0g08.png delete mode 100644 contrib/pngsuite/ftp0n2c08.png delete mode 100644 contrib/pngsuite/ftp0n3p08.png delete mode 100644 contrib/pngsuite/ftp1n3p08.png delete mode 100644 contrib/pngsuite/ibasn0g08.png delete mode 100644 contrib/pngsuite/ibasn0g16.png delete mode 100644 contrib/pngsuite/ibasn2c08.png delete mode 100644 contrib/pngsuite/ibasn2c16.png delete mode 100644 contrib/pngsuite/ibasn3p08.png delete mode 100644 contrib/pngsuite/ibasn4a08.png delete mode 100644 contrib/pngsuite/ibasn4a16.png delete mode 100644 contrib/pngsuite/ibasn6a08.png delete mode 100644 contrib/pngsuite/ibasn6a16.png delete mode 100644 contrib/pngsuite/iftbbn2c16.png delete mode 100644 contrib/pngsuite/iftbbn3p08.png delete mode 100644 contrib/pngsuite/iftbgn2c16.png delete mode 100644 contrib/pngsuite/iftbgn3p08.png delete mode 100644 contrib/pngsuite/iftbrn2c08.png delete mode 100644 contrib/pngsuite/iftbwn0g16.png delete mode 100644 contrib/pngsuite/iftbwn3p08.png delete mode 100644 contrib/pngsuite/iftbyn3p08.png delete mode 100644 contrib/pngsuite/iftp0n0g08.png delete mode 100644 contrib/pngsuite/iftp0n2c08.png delete mode 100644 contrib/pngsuite/iftp0n3p08.png delete mode 100644 contrib/pngsuite/iftp1n3p08.png delete mode 100644 contrib/pngsuite/interlaced/README delete mode 100644 contrib/pngsuite/interlaced/ibasn0g01.png delete mode 100644 contrib/pngsuite/interlaced/ibasn0g02.png delete mode 100644 contrib/pngsuite/interlaced/ibasn0g04.png delete mode 100644 contrib/pngsuite/interlaced/ibasn3p01.png delete mode 100644 contrib/pngsuite/interlaced/ibasn3p02.png delete mode 100644 contrib/pngsuite/interlaced/ibasn3p04.png delete mode 100644 contrib/pngsuite/interlaced/iftbbn0g01.png delete mode 100644 contrib/pngsuite/interlaced/iftbbn0g02.png delete mode 100644 contrib/pngsuite/interlaced/iftbbn0g04.png delete mode 100644 contrib/powerpc-vsx/README delete mode 100644 contrib/powerpc-vsx/linux.c delete mode 100644 contrib/powerpc-vsx/linux_aux.c delete mode 100644 contrib/testpngs/crashers/bad_iCCP.png delete mode 100644 contrib/testpngs/crashers/badadler.png delete mode 100644 contrib/testpngs/crashers/badcrc.png delete mode 100644 contrib/testpngs/crashers/empty_ancillary_chunks.png delete mode 100644 contrib/testpngs/crashers/huge_IDAT.png delete mode 100644 contrib/testpngs/crashers/huge_bKGD_chunk.png delete mode 100644 contrib/testpngs/crashers/huge_cHRM_chunk.png delete mode 100644 contrib/testpngs/crashers/huge_eXIf_chunk.png delete mode 100644 contrib/testpngs/crashers/huge_gAMA_chunk.png delete mode 100644 contrib/testpngs/crashers/huge_hIST_chunk.png delete mode 100644 contrib/testpngs/crashers/huge_iCCP_chunk.png delete mode 100644 contrib/testpngs/crashers/huge_iTXt_chunk.png delete mode 100644 contrib/testpngs/crashers/huge_juNK_unsafe_to_copy.png delete mode 100644 contrib/testpngs/crashers/huge_juNk_safe_to_copy.png delete mode 100644 contrib/testpngs/crashers/huge_pCAL_chunk.png delete mode 100644 contrib/testpngs/crashers/huge_pHYs_chunk.png delete mode 100644 contrib/testpngs/crashers/huge_sCAL_chunk.png delete mode 100644 contrib/testpngs/crashers/huge_sPLT_chunk.png delete mode 100644 contrib/testpngs/crashers/huge_sRGB_chunk.png delete mode 100644 contrib/testpngs/crashers/huge_sTER_chunk.png delete mode 100644 contrib/testpngs/crashers/huge_tEXt_chunk.png delete mode 100644 contrib/testpngs/crashers/huge_tIME_chunk.png delete mode 100644 contrib/testpngs/crashers/huge_zTXt_chunk.png delete mode 100644 contrib/testpngs/gray-1-1.8-tRNS.png delete mode 100644 contrib/testpngs/gray-1-1.8.png delete mode 100644 contrib/testpngs/gray-1-linear-tRNS.png delete mode 100644 contrib/testpngs/gray-1-linear.png delete mode 100644 contrib/testpngs/gray-1-sRGB-tRNS.png delete mode 100644 contrib/testpngs/gray-1-sRGB.png delete mode 100644 contrib/testpngs/gray-1-tRNS.png delete mode 100644 contrib/testpngs/gray-1.png delete mode 100644 contrib/testpngs/gray-16-1.8-tRNS.png delete mode 100644 contrib/testpngs/gray-16-1.8.png delete mode 100644 contrib/testpngs/gray-16-linear-tRNS.png delete mode 100644 contrib/testpngs/gray-16-linear.png delete mode 100644 contrib/testpngs/gray-16-sRGB-tRNS.png delete mode 100644 contrib/testpngs/gray-16-sRGB.png delete mode 100644 contrib/testpngs/gray-16-tRNS.png delete mode 100644 contrib/testpngs/gray-16.png delete mode 100644 contrib/testpngs/gray-2-1.8-tRNS.png delete mode 100644 contrib/testpngs/gray-2-1.8.png delete mode 100644 contrib/testpngs/gray-2-linear-tRNS.png delete mode 100644 contrib/testpngs/gray-2-linear.png delete mode 100644 contrib/testpngs/gray-2-sRGB-tRNS.png delete mode 100644 contrib/testpngs/gray-2-sRGB.png delete mode 100644 contrib/testpngs/gray-2-tRNS.png delete mode 100644 contrib/testpngs/gray-2.png delete mode 100644 contrib/testpngs/gray-4-1.8-tRNS.png delete mode 100644 contrib/testpngs/gray-4-1.8.png delete mode 100644 contrib/testpngs/gray-4-linear-tRNS.png delete mode 100644 contrib/testpngs/gray-4-linear.png delete mode 100644 contrib/testpngs/gray-4-sRGB-tRNS.png delete mode 100644 contrib/testpngs/gray-4-sRGB.png delete mode 100644 contrib/testpngs/gray-4-tRNS.png delete mode 100644 contrib/testpngs/gray-4.png delete mode 100644 contrib/testpngs/gray-8-1.8-tRNS.png delete mode 100644 contrib/testpngs/gray-8-1.8.png delete mode 100644 contrib/testpngs/gray-8-linear-tRNS.png delete mode 100644 contrib/testpngs/gray-8-linear.png delete mode 100644 contrib/testpngs/gray-8-sRGB-tRNS.png delete mode 100644 contrib/testpngs/gray-8-sRGB.png delete mode 100644 contrib/testpngs/gray-8-tRNS.png delete mode 100644 contrib/testpngs/gray-8.png delete mode 100644 contrib/testpngs/gray-alpha-16-1.8.png delete mode 100644 contrib/testpngs/gray-alpha-16-linear.png delete mode 100644 contrib/testpngs/gray-alpha-16-sRGB.png delete mode 100644 contrib/testpngs/gray-alpha-16.png delete mode 100644 contrib/testpngs/gray-alpha-8-1.8.png delete mode 100644 contrib/testpngs/gray-alpha-8-linear.png delete mode 100644 contrib/testpngs/gray-alpha-8-sRGB.png delete mode 100644 contrib/testpngs/gray-alpha-8.png delete mode 100755 contrib/testpngs/makepngs.sh delete mode 100644 contrib/testpngs/palette-1-1.8-tRNS.png delete mode 100644 contrib/testpngs/palette-1-1.8.png delete mode 100644 contrib/testpngs/palette-1-linear-tRNS.png delete mode 100644 contrib/testpngs/palette-1-linear.png delete mode 100644 contrib/testpngs/palette-1-sRGB-tRNS.png delete mode 100644 contrib/testpngs/palette-1-sRGB.png delete mode 100644 contrib/testpngs/palette-1-tRNS.png delete mode 100644 contrib/testpngs/palette-1.png delete mode 100644 contrib/testpngs/palette-2-1.8-tRNS.png delete mode 100644 contrib/testpngs/palette-2-1.8.png delete mode 100644 contrib/testpngs/palette-2-linear-tRNS.png delete mode 100644 contrib/testpngs/palette-2-linear.png delete mode 100644 contrib/testpngs/palette-2-sRGB-tRNS.png delete mode 100644 contrib/testpngs/palette-2-sRGB.png delete mode 100644 contrib/testpngs/palette-2-tRNS.png delete mode 100644 contrib/testpngs/palette-2.png delete mode 100644 contrib/testpngs/palette-4-1.8-tRNS.png delete mode 100644 contrib/testpngs/palette-4-1.8.png delete mode 100644 contrib/testpngs/palette-4-linear-tRNS.png delete mode 100644 contrib/testpngs/palette-4-linear.png delete mode 100644 contrib/testpngs/palette-4-sRGB-tRNS.png delete mode 100644 contrib/testpngs/palette-4-sRGB.png delete mode 100644 contrib/testpngs/palette-4-tRNS.png delete mode 100644 contrib/testpngs/palette-4.png delete mode 100644 contrib/testpngs/palette-8-1.8-tRNS.png delete mode 100644 contrib/testpngs/palette-8-1.8.png delete mode 100644 contrib/testpngs/palette-8-linear-tRNS.png delete mode 100644 contrib/testpngs/palette-8-linear.png delete mode 100644 contrib/testpngs/palette-8-sRGB-tRNS.png delete mode 100644 contrib/testpngs/palette-8-sRGB.png delete mode 100644 contrib/testpngs/palette-8-tRNS.png delete mode 100644 contrib/testpngs/palette-8.png delete mode 100644 contrib/testpngs/rgb-16-1.8-tRNS.png delete mode 100644 contrib/testpngs/rgb-16-1.8.png delete mode 100644 contrib/testpngs/rgb-16-linear-tRNS.png delete mode 100644 contrib/testpngs/rgb-16-linear.png delete mode 100644 contrib/testpngs/rgb-16-sRGB-tRNS.png delete mode 100644 contrib/testpngs/rgb-16-sRGB.png delete mode 100644 contrib/testpngs/rgb-16-tRNS.png delete mode 100644 contrib/testpngs/rgb-16.png delete mode 100644 contrib/testpngs/rgb-8-1.8-tRNS.png delete mode 100644 contrib/testpngs/rgb-8-1.8.png delete mode 100644 contrib/testpngs/rgb-8-linear-tRNS.png delete mode 100644 contrib/testpngs/rgb-8-linear.png delete mode 100644 contrib/testpngs/rgb-8-sRGB-tRNS.png delete mode 100644 contrib/testpngs/rgb-8-sRGB.png delete mode 100644 contrib/testpngs/rgb-8-tRNS.png delete mode 100644 contrib/testpngs/rgb-8.png delete mode 100644 contrib/testpngs/rgb-alpha-16-1.8.png delete mode 100644 contrib/testpngs/rgb-alpha-16-linear.png delete mode 100644 contrib/testpngs/rgb-alpha-16-sRGB.png delete mode 100644 contrib/testpngs/rgb-alpha-16.png delete mode 100644 contrib/testpngs/rgb-alpha-8-1.8.png delete mode 100644 contrib/testpngs/rgb-alpha-8-linear.png delete mode 100644 contrib/testpngs/rgb-alpha-8-sRGB.png delete mode 100644 contrib/testpngs/rgb-alpha-8.png delete mode 100644 contrib/tools/README.txt delete mode 100644 contrib/tools/checksum-icc.c delete mode 100755 contrib/tools/chkfmt delete mode 100644 contrib/tools/cvtcolor.c delete mode 100644 contrib/tools/genpng.c delete mode 100755 contrib/tools/intgamma.sh delete mode 100644 contrib/tools/makesRGB.c delete mode 100644 contrib/tools/png-fix-itxt.c delete mode 100644 contrib/tools/pngcp.c delete mode 100644 contrib/tools/pngfix.c delete mode 100755 contrib/tools/reindent delete mode 100644 contrib/tools/sRGB.h delete mode 100644 contrib/visupng/PngFile.c delete mode 100644 contrib/visupng/PngFile.h delete mode 100644 contrib/visupng/README.txt delete mode 100644 contrib/visupng/VisualPng.c delete mode 100644 contrib/visupng/VisualPng.dsp delete mode 100644 contrib/visupng/VisualPng.dsw delete mode 100644 contrib/visupng/VisualPng.ico delete mode 100644 contrib/visupng/VisualPng.png delete mode 100644 contrib/visupng/VisualPng.rc delete mode 100644 contrib/visupng/cexcept.h delete mode 100644 contrib/visupng/resource.h delete mode 100755 depcomp delete mode 100644 example.c delete mode 100755 install-sh delete mode 100644 libpng.3 delete mode 100644 libpng.pc.in delete mode 100644 libpngpf.3 delete mode 100755 ltmain.sh delete mode 100755 missing delete mode 100644 png.5 delete mode 100644 pngbar.jpg delete mode 100644 pngbar.png rename scripts/pnglibconf.h.prebuilt => pnglibconf.h (99%) delete mode 100644 pngnow.png delete mode 100644 pngtest.c delete mode 100644 pngtest.png delete mode 100644 pngusr.dfa delete mode 100644 projects/owatcom/libpng.tgt delete mode 100644 projects/owatcom/libpng.wpj delete mode 100644 projects/owatcom/pngconfig.mak delete mode 100644 projects/owatcom/pngstest.tgt delete mode 100644 projects/owatcom/pngtest.tgt delete mode 100644 projects/owatcom/pngvalid.tgt delete mode 100644 projects/visualc71/PRJ0041.mak delete mode 100644 projects/visualc71/README.txt delete mode 100644 projects/visualc71/README_zlib.txt delete mode 100644 projects/visualc71/libpng.sln delete mode 100644 projects/visualc71/libpng.vcproj delete mode 100644 projects/visualc71/pngtest.vcproj delete mode 100644 projects/visualc71/zlib.vcproj delete mode 100644 projects/vstudio/README.txt delete mode 100644 projects/vstudio/libpng/libpng.vcxproj delete mode 100644 projects/vstudio/pnglibconf/pnglibconf.vcxproj delete mode 100644 projects/vstudio/pngstest/pngstest.vcxproj delete mode 100644 projects/vstudio/pngtest/pngtest.vcxproj delete mode 100644 projects/vstudio/pngunknown/pngunknown.vcxproj delete mode 100644 projects/vstudio/pngvalid/pngvalid.vcxproj delete mode 100644 projects/vstudio/vstudio.sln delete mode 100644 projects/vstudio/zlib.props delete mode 100644 projects/vstudio/zlib/zlib.vcxproj delete mode 100644 scripts/README.txt delete mode 100644 scripts/SCOPTIONS.ppc delete mode 100755 scripts/checksym.awk delete mode 100644 scripts/descrip.mms delete mode 100755 scripts/dfn.awk delete mode 100644 scripts/genchk.cmake.in delete mode 100644 scripts/genout.cmake.in delete mode 100644 scripts/gensrc.cmake.in delete mode 100644 scripts/intprefix.c delete mode 100644 scripts/libpng-config-body.in delete mode 100644 scripts/libpng-config-head.in delete mode 100644 scripts/libpng.pc.in delete mode 100644 scripts/libtool.m4 delete mode 100644 scripts/ltoptions.m4 delete mode 100644 scripts/ltsugar.m4 delete mode 100644 scripts/ltversion.m4 delete mode 100644 scripts/lt~obsolete.m4 delete mode 100644 scripts/macro.lst delete mode 100644 scripts/makefile.32sunu delete mode 100644 scripts/makefile.64sunu delete mode 100644 scripts/makefile.acorn delete mode 100644 scripts/makefile.aix delete mode 100644 scripts/makefile.amiga delete mode 100644 scripts/makefile.atari delete mode 100644 scripts/makefile.bc32 delete mode 100644 scripts/makefile.beos delete mode 100644 scripts/makefile.cegcc delete mode 100644 scripts/makefile.clang delete mode 100644 scripts/makefile.darwin delete mode 100644 scripts/makefile.dec delete mode 100644 scripts/makefile.dj2 delete mode 100644 scripts/makefile.freebsd delete mode 100644 scripts/makefile.gcc delete mode 100644 scripts/makefile.hp64 delete mode 100644 scripts/makefile.hpgcc delete mode 100644 scripts/makefile.hpux delete mode 100644 scripts/makefile.ibmc delete mode 100644 scripts/makefile.intel delete mode 100644 scripts/makefile.linux delete mode 100644 scripts/makefile.linux-opt delete mode 100644 scripts/makefile.mips delete mode 100644 scripts/makefile.msys delete mode 100644 scripts/makefile.netbsd delete mode 100644 scripts/makefile.openbsd delete mode 100644 scripts/makefile.sco delete mode 100644 scripts/makefile.sggcc delete mode 100644 scripts/makefile.sgi delete mode 100644 scripts/makefile.so9 delete mode 100644 scripts/makefile.solaris delete mode 100644 scripts/makefile.std delete mode 100644 scripts/makefile.sunos delete mode 100644 scripts/makefile.vcwin32 delete mode 100644 scripts/makevms.com delete mode 100755 scripts/options.awk delete mode 100644 scripts/pnglibconf.dfa delete mode 100755 scripts/pnglibconf.mak delete mode 100644 scripts/pngwin.rc delete mode 100644 scripts/prefix.c delete mode 100644 scripts/smakefile.ppc delete mode 100644 scripts/sym.c delete mode 100644 scripts/symbols.c delete mode 100644 scripts/symbols.def delete mode 100644 scripts/test.cmake.in delete mode 100644 scripts/vers.c delete mode 100755 test-driver delete mode 100755 tests/pngimage-full delete mode 100755 tests/pngimage-quick delete mode 100755 tests/pngstest delete mode 100755 tests/pngstest-1.8 delete mode 100755 tests/pngstest-1.8-alpha delete mode 100755 tests/pngstest-linear delete mode 100755 tests/pngstest-linear-alpha delete mode 100755 tests/pngstest-none delete mode 100755 tests/pngstest-none-alpha delete mode 100755 tests/pngstest-sRGB delete mode 100755 tests/pngstest-sRGB-alpha delete mode 100755 tests/pngtest-all delete mode 100755 tests/pngunknown-IDAT delete mode 100755 tests/pngunknown-discard delete mode 100755 tests/pngunknown-if-safe delete mode 100755 tests/pngunknown-sAPI delete mode 100755 tests/pngunknown-sTER delete mode 100755 tests/pngunknown-save delete mode 100755 tests/pngunknown-vpAg delete mode 100755 tests/pngvalid-gamma-16-to-8 delete mode 100755 tests/pngvalid-gamma-alpha-mode delete mode 100755 tests/pngvalid-gamma-background delete mode 100755 tests/pngvalid-gamma-expand16-alpha-mode delete mode 100755 tests/pngvalid-gamma-expand16-background delete mode 100755 tests/pngvalid-gamma-expand16-transform delete mode 100755 tests/pngvalid-gamma-sbit delete mode 100755 tests/pngvalid-gamma-threshold delete mode 100755 tests/pngvalid-gamma-transform delete mode 100755 tests/pngvalid-progressive-interlace-standard delete mode 100755 tests/pngvalid-progressive-size delete mode 100755 tests/pngvalid-progressive-standard delete mode 100755 tests/pngvalid-standard delete mode 100755 tests/pngvalid-transform diff --git a/.appveyor.yml b/.appveyor.yml deleted file mode 100644 index 932a2801c..000000000 --- a/.appveyor.yml +++ /dev/null @@ -1,69 +0,0 @@ -version: 1.6.x-{build} - -branches: - except: - - /libpng[0-1][0-7]/ - -image: - - Visual Studio 2019 - -shallow_clone: true - -environment: - matrix: - - TOOLCHAIN: vstudio - AUTOMATION: cmake - ARCH: x86 - - TOOLCHAIN: vstudio - AUTOMATION: cmake - ARCH: x64 - - TOOLCHAIN: vstudio - AUTOMATION: cmake - ARCH: arm64 - CI_NO_TEST: 1 - - TOOLCHAIN: msys2 - AUTOMATION: cmake - ARCH: i686 - - TOOLCHAIN: msys2 - AUTOMATION: cmake - ARCH: x86_64 - - TOOLCHAIN: msys2 - AUTOMATION: autotools - ARCH: i686 - - TOOLCHAIN: msys2 - AUTOMATION: autotools - ARCH: x86_64 - - TOOLCHAIN: msys2 - AUTOMATION: legacy - ARCH: i686 - - TOOLCHAIN: msys2 - AUTOMATION: legacy - ARCH: x86_64 - -install: - - 'if "%TOOLCHAIN%"=="vstudio" C:\tools\vcpkg\vcpkg.exe install zlib:%ARCH%-windows' - - 'if "%TOOLCHAIN%"=="vstudio" C:\tools\vcpkg\vcpkg.exe integrate install' - -before_build: - - 'if "%TOOLCHAIN%"=="vstudio" set CI_CMAKE_VARS=-DCMAKE_TOOLCHAIN_FILE=C:\tools\vcpkg\scripts\buildsystems\vcpkg.cmake' - - 'if "%TOOLCHAIN%"=="vstudio" set CI_CMAKE_GENERATOR=Visual Studio 16 2019' - - 'if "%TOOLCHAIN%"=="vstudio" if "%ARCH%"=="x86" set CI_CMAKE_GENERATOR_PLATFORM=Win32' - - 'if "%TOOLCHAIN%"=="vstudio" if "%ARCH%"=="x64" set CI_CMAKE_GENERATOR_PLATFORM=X64' - - 'if "%TOOLCHAIN%"=="vstudio" if "%ARCH%"=="arm64" set CI_CMAKE_GENERATOR_PLATFORM=ARM64' - - 'if "%TOOLCHAIN%"=="msys2" if "%AUTOMATION%"=="cmake" set CI_CMAKE_GENERATOR=Unix Makefiles' - - 'if "%TOOLCHAIN%"=="msys2" if "%ARCH%"=="i686" set PATH=C:\msys64\mingw32\bin;%PATH%' - - 'if "%TOOLCHAIN%"=="msys2" if "%ARCH%"=="x86_64" set PATH=C:\msys64\mingw64\bin;%PATH%' - - 'if "%TOOLCHAIN%"=="msys2" set CI_CC=%ARCH%-w64-mingw32-gcc' - - 'set CI_CMAKE_BUILD_FLAGS=--parallel 2' - - 'set CI_CTEST_FLAGS=--parallel 2' - - 'set CI_MAKE_FLAGS=-j2' - - 'set CI_LEGACY_MAKEFILES=scripts/makefile.gcc scripts/makefile.msys scripts/makefile.std' - -build_script: - - 'if "%TOOLCHAIN%"=="vstudio" C:\msys64\usr\bin\bash.exe -l "%APPVEYOR_BUILD_FOLDER%\ci\ci_cmake.sh"' - - 'if "%TOOLCHAIN%"=="msys2" if "%AUTOMATION%"=="cmake" C:\msys64\usr\bin\bash.exe -l "%APPVEYOR_BUILD_FOLDER%\ci\ci_cmake.sh"' - - 'if "%TOOLCHAIN%"=="msys2" if "%AUTOMATION%"=="autotools" C:\msys64\usr\bin\bash.exe -l "%APPVEYOR_BUILD_FOLDER%\ci\ci_autotools.sh"' - - 'if "%TOOLCHAIN%"=="msys2" if "%AUTOMATION%"=="legacy" C:\msys64\usr\bin\bash.exe -l "%APPVEYOR_BUILD_FOLDER%\ci\ci_legacy.sh"' - -cache: - - C:\tools\vcpkg\installed diff --git a/.travis.yml b/.travis.yml deleted file mode 100644 index 3c1eb0ccf..000000000 --- a/.travis.yml +++ /dev/null @@ -1,41 +0,0 @@ -branches: - except: - - /libpng[0-1][0-7]/ - -language: c - -os: - - linux - - osx - -compiler: - - clang - - gcc - -env: - - AUTOMATION=cmake CI_NO_TEST=1 - - AUTOMATION=cmake CI_CMAKE_VARS="-DPNG_HARDWARE_OPTIMIZATIONS=ON" CI_SANITIZERS="address,undefined" - - AUTOMATION=cmake CI_CMAKE_VARS="-DPNG_HARDWARE_OPTIMIZATIONS=OFF" CI_SANITIZERS="address,undefined" - - AUTOMATION=cmake CI_CMAKE_GENERATOR=Xcode - - AUTOMATION=autotools CI_NO_TEST=1 - - AUTOMATION=autotools CI_CONFIGURE_FLAGS="--enable-hardware-optimizations" - - AUTOMATION=autotools CI_CONFIGURE_FLAGS="--disable-hardware-optimizations" - - AUTOMATION=legacy CI_NO_TEST=1 - - AUTOMATION=legacy CI_SANITIZERS="address,undefined" - -matrix: - exclude: - - os: osx - compiler: gcc - - os: linux - env: AUTOMATION=cmake CI_CMAKE_GENERATOR=Xcode - -before_script: - - 'export CI_CMAKE_BUILD_FLAGS="--parallel 2"' - - 'export CI_CTEST_FLAGS="--parallel 2"' - - 'export CI_MAKE_FLAGS=-j2' - - 'export CI_CC=$TRAVIS_COMPILER' - - 'export CI_LEGACY_MAKEFILES="scripts/makefile.$TRAVIS_COMPILER scripts/makefile.std"' - -script: - - './ci/ci_$AUTOMATION.sh' diff --git a/INSTALL b/INSTALL deleted file mode 100644 index 4c1702251..000000000 --- a/INSTALL +++ /dev/null @@ -1,465 +0,0 @@ - - Installing libpng - -Contents - - I. Simple installation - II. Rebuilding the configure scripts - III. Using scripts/makefile* - IV. Using cmake - V. Directory structure - VI. Building with project files - VII. Building with makefiles - VIII. Configuring libpng for 16-bit platforms - IX. Configuring for DOS - X. Configuring for Medium Model - XI. Prepending a prefix to exported symbols - XII. Configuring for compiler xxx: - XIII. Removing unwanted object code - XIV. Enabling or disabling hardware optimizations - XV. Changes to the build and configuration of libpng in libpng-1.5.x - XVI. Setjmp/longjmp issues - XVII. Common linking failures - XVIII. Other sources of information about libpng - -I. Simple installation - -On Unix/Linux and similar systems, you can simply type - - ./configure [--prefix=/path] - make check - make install - -and ignore the rest of this document. "/path" is the path to the directory -where you want to install the libpng "lib", "include", and "bin" -subdirectories. - -If you downloaded a GIT clone, you will need to run ./autogen.sh before -running ./configure, to create "configure" and "Makefile.in" which are -not included in the GIT repository. - -Note that "configure" is only included in the "*.tar" distributions and not -in the "*.zip" or "*.7z" distributions. If you downloaded one of those -distributions, see "Building with project files" or "Building with makefiles", -below. - -II. Rebuilding the configure scripts - -If configure does not work on your system, or if you have a need to -change configure.ac or Makefile.am, and you have a reasonably -up-to-date set of tools, running ./autogen.sh in a git clone before -running ./configure may fix the problem. To be really sure that you -aren't using any of the included pre-built scripts, especially if you -are building from a tar distribution instead of a git distribution, -do this: - - ./configure --enable-maintainer-mode - make maintainer-clean - ./autogen.sh --maintainer --clean - ./autogen.sh --maintainer - ./configure [--prefix=/path] [other options] - make - make install - make check - -III. Using scripts/makefile* - -Instead, you can use one of the custom-built makefiles in the -"scripts" directory - - cp scripts/pnglibconf.h.prebuilt pnglibconf.h - cp scripts/makefile.system makefile - make test - make install - -The files that are presently available in the scripts directory -are listed and described in scripts/README.txt. - -Or you can use one of the "projects" in the "projects" directory. - -Before installing libpng, you must first install zlib, if it -is not already on your system. zlib can usually be found -wherever you got libpng; otherwise go to https://zlib.net/. You can -place zlib in the same directory as libpng or in another directory. - -If your system already has a preinstalled zlib you will still need -to have access to the zlib.h and zconf.h include files that -correspond to the version of zlib that's installed. - -If you wish to test with a particular zlib that is not first in the -standard library search path, put ZLIBLIB, ZLIBINC, CPPFLAGS, LDFLAGS, -and LD_LIBRARY_PATH in your environment before running "make test" -or "make distcheck": - - ZLIBLIB=/path/to/lib export ZLIBLIB - ZLIBINC=/path/to/include export ZLIBINC - CPPFLAGS="-I$ZLIBINC" export CPPFLAGS - LDFLAGS="-L$ZLIBLIB" export LDFLAGS - LD_LIBRARY_PATH="$ZLIBLIB:$LD_LIBRARY_PATH" export LD_LIBRARY_PATH - -If you are using one of the makefile scripts, put ZLIBLIB and ZLIBINC -in your environment and type - - make ZLIBLIB=$ZLIBLIB ZLIBINC=$ZLIBINC test - -IV. Using cmake - -If you want to use "cmake" (see www.cmake.org), type - - cmake . -DCMAKE_INSTALL_PREFIX=/path - make - make install - -As when using the simple configure method described above, "/path" points to -the installation directory where you want to put the libpng "lib", "include", -and "bin" subdirectories. - -V. Directory structure - -You can rename the directories that you downloaded (they -might be called "libpng-x.y.z" or "libpngNN" and "zlib-1.2.8" -or "zlib128") so that you have directories called "zlib" and "libpng". - -Your directory structure should look like this: - - .. (the parent directory) - libpng (this directory) - INSTALL (this file) - README - *.h, *.c => libpng source files - CMakeLists.txt => "cmake" script - configuration files: - configure.ac, configure, Makefile.am, Makefile.in, - autogen.sh, config.guess, ltmain.sh, missing, libpng.pc.in, - libpng-config.in, aclocal.m4, config.h.in, config.sub, - depcomp, install-sh, mkinstalldirs, test-pngtest.sh - contrib - arm-neon, conftest, examples, gregbook, libtests, pngminim, - pngminus, pngsuite, tools, visupng - projects - cbuilder5, owatcom, visualc71, vstudio, xcode - scripts - makefile.* - *.def (module definition files) - etc. - pngtest.png - etc. - zlib - README, *.h, *.c contrib, etc. - -If the line endings in the files look funny, you may wish to get the other -distribution of libpng. It is available in both tar.gz (UNIX style line -endings) and zip (DOS style line endings) formats. - -VI. Building with project files - -If you are building libpng with MSVC, you can enter the -libpng projects\visualc71 or vstudio directory and follow the instructions -in README.txt. - -Otherwise enter the zlib directory and follow the instructions in zlib/README, -then come back here and run "configure" or choose the appropriate -makefile.sys in the scripts directory. - -VII. Building with makefiles - -Copy the file (or files) that you need from the -scripts directory into this directory, for example - -MSDOS example: - - copy scripts\makefile.msc makefile - copy scripts\pnglibconf.h.prebuilt pnglibconf.h - -UNIX example: - - cp scripts/makefile.std makefile - cp scripts/pnglibconf.h.prebuilt pnglibconf.h - -Read the makefile to see if you need to change any source or -target directories to match your preferences. - -Then read pnglibconf.dfa to see if you want to make any configuration -changes. - -Then just run "make" which will create the libpng library in -this directory and "make test" which will run a quick test that reads -the "pngtest.png" file and writes a "pngout.png" file that should be -identical to it. Look for "9782 zero samples" in the output of the -test. For more confidence, you can run another test by typing -"pngtest pngnow.png" and looking for "289 zero samples" in the output. -Also, you can run "pngtest -m contrib/pngsuite/*.png" and compare -your output with the result shown in contrib/pngsuite/README. - -Most of the makefiles will allow you to run "make install" to -put the library in its final resting place (if you want to -do that, run "make install" in the zlib directory first if necessary). -Some also allow you to run "make test-installed" after you have -run "make install". - -VIII. Configuring libpng for 16-bit platforms - -You will want to look into zconf.h to tell zlib (and thus libpng) that -it cannot allocate more than 64K at a time. Even if you can, the memory -won't be accessible. So limit zlib and libpng to 64K by defining MAXSEG_64K. - -IX. Configuring for DOS - -For DOS users who only have access to the lower 640K, you will -have to limit zlib's memory usage via a png_set_compression_mem_level() -call. See zlib.h or zconf.h in the zlib library for more information. - -X. Configuring for Medium Model - -Libpng's support for medium model has been tested on most of the popular -compilers. Make sure MAXSEG_64K gets defined, USE_FAR_KEYWORD gets -defined, and FAR gets defined to far in pngconf.h, and you should be -all set. Everything in the library (except for zlib's structure) is -expecting far data. You must use the typedefs with the p or pp on -the end for pointers (or at least look at them and be careful). Make -note that the rows of data are defined as png_bytepp, which is -an "unsigned char far * far *". - -XI. Prepending a prefix to exported symbols - -Starting with libpng-1.6.0, you can configure libpng (when using the -"configure" script) to prefix all exported symbols by means of the -configuration option "--with-libpng-prefix=FOO_", where FOO_ can be any -string beginning with a letter and containing only uppercase -and lowercase letters, digits, and the underscore (i.e., a C language -identifier). This creates a set of macros in pnglibconf.h, so this is -transparent to applications; their function calls get transformed by -the macros to use the modified names. - -XII. Configuring for compiler xxx: - -All includes for libpng are in pngconf.h. If you need to add, change -or delete an include, this is the place to do it. -The includes that are not needed outside libpng are placed in pngpriv.h, -which is only used by the routines inside libpng itself. -The files in libpng proper only include pngpriv.h and png.h, which -in turn includes pngconf.h and, as of libpng-1.5.0, pnglibconf.h. -As of libpng-1.5.0, pngpriv.h also includes three other private header -files, pngstruct.h, pnginfo.h, and pngdebug.h, which contain material -that previously appeared in the public headers. - -XIII. Removing unwanted object code - -There are a bunch of #define's in pngconf.h that control what parts of -libpng are compiled. All the defines end in _SUPPORTED. If you are -never going to use a capability, you can change the #define to #undef -before recompiling libpng and save yourself code and data space, or -you can turn off individual capabilities with defines that begin with -"PNG_NO_". - -In libpng-1.5.0 and later, the #define's are in pnglibconf.h instead. - -You can also turn all of the transforms and ancillary chunk capabilities -off en masse with compiler directives that define -PNG_NO_READ[or WRITE]_TRANSFORMS, or PNG_NO_READ[or WRITE]_ANCILLARY_CHUNKS, -or all four, along with directives to turn on any of the capabilities that -you do want. The PNG_NO_READ[or WRITE]_TRANSFORMS directives disable the -extra transformations but still leave the library fully capable of reading -and writing PNG files with all known public chunks. Use of the -PNG_NO_READ[or WRITE]_ANCILLARY_CHUNKS directive produces a library -that is incapable of reading or writing ancillary chunks. If you are -not using the progressive reading capability, you can turn that off -with PNG_NO_PROGRESSIVE_READ (don't confuse this with the INTERLACING -capability, which you'll still have). - -All the reading and writing specific code are in separate files, so the -linker should only grab the files it needs. However, if you want to -make sure, or if you are building a stand alone library, all the -reading files start with "pngr" and all the writing files start with "pngw". -The files that don't match either (like png.c, pngtrans.c, etc.) -are used for both reading and writing, and always need to be included. -The progressive reader is in pngpread.c - -If you are creating or distributing a dynamically linked library (a .so -or DLL file), you should not remove or disable any parts of the library, -as this will cause applications linked with different versions of the -library to fail if they call functions not available in your library. -The size of the library itself should not be an issue, because only -those sections that are actually used will be loaded into memory. - -XIV. Enabling or disabling hardware optimizations - -Certain hardware capabilities, such as the Intel SSE instructions, -are normally detected at run time. Enable them with configure options -such as one of - - --enable-arm-neon=yes - --enable-mips-msa=yes - --enable-intel-sse=yes - --enable-powerpc-vsx=yes - -or enable them all at once with - - --enable-hardware-optimizations=yes - -or, if you are not using "configure", you can use one -or more of - - CPPFLAGS += "-DPNG_ARM_NEON" - CPPFLAGS += "-DPNG_MIPS_MSA" - CPPFLAGS += "-DPNG_INTEL_SSE" - CPPFLAGS += "-DPNG_POWERPC_VSX" - -See for example scripts/makefile.linux-opt - -If you wish to avoid using them, -you can disable them via the configure option - - --disable-hardware-optimizations - -to disable them all, or - - --enable-intel-sse=no - -to disable a particular one, -or via compiler-command options such as - - CPPFLAGS += "-DPNG_ARM_NEON_OPT=0, -DPNG_MIPS_MSA_OPT=0, - -DPNG_INTEL_SSE_OPT=0, -DPNG_POWERPC_VSX_OPT=0" - -If you are using cmake, hardware optimizations are "on" -by default. To disable them, use - - cmake . -DPNG_ARM_NEON=no -DPNG_INTEL_SSE=no \ - -DPNG_MIPS_MSA=no -DPNG_POWERPC_VSX=no - -or disable them all at once with - - cmake . -DPNG_HARDWARE_OPTIMIZATIONS=no - -XV. Changes to the build and configuration of libpng in libpng-1.5.x - -Details of internal changes to the library code can be found in the CHANGES -file and in the GIT repository logs. These will be of no concern to the vast -majority of library users or builders; however, the few who configure libpng -to a non-default feature set may need to change how this is done. - -There should be no need for library builders to alter build scripts if -these use the distributed build support - configure or the makefiles - -however, users of the makefiles may care to update their build scripts -to build pnglibconf.h where the corresponding makefile does not do so. - -Building libpng with a non-default configuration has changed completely. -The old method using pngusr.h should still work correctly even though the -way pngusr.h is used in the build has been changed; however, library -builders will probably want to examine the changes to take advantage of -new capabilities and to simplify their build system. - -A. Specific changes to library configuration capabilities - -The exact mechanism used to control attributes of API functions has -changed. A single set of operating system independent macro definitions -is used and operating system specific directives are defined in -pnglibconf.h - -As part of this the mechanism used to choose procedure call standards on -those systems that allow a choice has been changed. At present this only -affects certain Microsoft (DOS, Windows) and IBM (OS/2) operating systems -running on Intel processors. As before, PNGAPI is defined where required -to control the exported API functions; however, two new macros, PNGCBAPI -and PNGCAPI, are used instead for callback functions (PNGCBAPI) and -(PNGCAPI) for functions that must match a C library prototype (currently -only png_longjmp_ptr, which must match the C longjmp function.) The new -approach is documented in pngconf.h - -Despite these changes, libpng 1.5.0 only supports the native C function -calling standard on those platforms tested so far ("__cdecl" on Microsoft -Windows). This is because the support requirements for alternative -calling conventions seem to no longer exist. Developers who find it -necessary to set PNG_API_RULE to 1 should advise the mailing list -(png-mng-implement) of this and library builders who use Openwatcom and -therefore set PNG_API_RULE to 2 should also contact the mailing list. - -B. Changes to the configuration mechanism - -Prior to libpng-1.5.0 library builders who needed to configure libpng -had either to modify the exported pngconf.h header file to add system -specific configuration or had to write feature selection macros into -pngusr.h and cause this to be included into pngconf.h by defining -PNG_USER_CONFIG. The latter mechanism had the disadvantage that an -application built without PNG_USER_CONFIG defined would see the -unmodified, default, libpng API and thus would probably fail to link. - -These mechanisms still work in the configure build and in any makefile -build that builds pnglibconf.h, although the feature selection macros -have changed somewhat as described above. In 1.5.0, however, pngusr.h is -processed only once, at the time the exported header file pnglibconf.h is -built. pngconf.h no longer includes pngusr.h; therefore, pngusr.h is ignored -after the build of pnglibconf.h and it is never included in an application -build. - -The formerly used alternative of adding a list of feature macros to the -CPPFLAGS setting in the build also still works; however, the macros will be -copied to pnglibconf.h and this may produce macro redefinition warnings -when the individual C files are compiled. - -All configuration now only works if pnglibconf.h is built from -scripts/pnglibconf.dfa. This requires the program awk. Brian Kernighan -(the original author of awk) maintains C source code of that awk and this -and all known later implementations (often called by subtly different -names - nawk and gawk for example) are adequate to build pnglibconf.h. -The Sun Microsystems (now Oracle) program 'awk' is an earlier version -and does not work; this may also apply to other systems that have a -functioning awk called 'nawk'. - -Configuration options are now documented in scripts/pnglibconf.dfa. This -file also includes dependency information that ensures a configuration is -consistent; that is, if a feature is switched off, dependent features are -also switched off. As a recommended alternative to using feature macros in -pngusr.h a system builder may also define equivalent options in pngusr.dfa -(or, indeed, any file) and add that to the configuration by setting -DFA_XTRA to the file name. The makefiles in contrib/pngminim illustrate -how to do this, and also illustrate a case where pngusr.h is still required. - -After you have built libpng, the definitions that were recorded in -pnglibconf.h are available to your application (pnglibconf.h is included -in png.h and gets installed alongside png.h and pngconf.h in your -$PREFIX/include directory). Do not edit pnglibconf.h after you have built -libpng, because than the settings would not accurately reflect the settings -that were used to build libpng. - -XVI. Setjmp/longjmp issues - -Libpng uses setjmp()/longjmp() for error handling. Unfortunately setjmp() -is known to be not thread-safe on some platforms and we don't know of -any platform where it is guaranteed to be thread-safe. Therefore, if -your application is going to be using multiple threads, you should -configure libpng with PNG_NO_SETJMP in your pngusr.dfa file, with --DPNG_NO_SETJMP on your compile line, or with - - #undef PNG_SETJMP_SUPPORTED - -in your pnglibconf.h or pngusr.h. - -Starting with libpng-1.6.0, the library included a "simplified API". -This requires setjmp/longjmp, so you must either build the library -with PNG_SETJMP_SUPPORTED defined, or with PNG_SIMPLIFIED_READ_SUPPORTED -and PNG_SIMPLIFIED_WRITE_SUPPORTED undefined. - -XVII. Common linking failures - -If your application fails to find libpng or zlib entries while linking: - - Be sure "-lz" appears after "-lpng" on your linking command. - - Be sure you have built libpng, zlib, and your application for the - same platform (e.g., 32-bit or 64-bit). - - If you are using the vstudio project, observe the WARNING in - project/vstudio/README.txt. - -XVIII. Other sources of information about libpng: - -Further information can be found in the README and libpng-manual.txt -files, in the individual makefiles, in png.h, and the manual pages -libpng.3 and png.5. - -Copyright (c) 1998-2002,2006-2016 Glenn Randers-Pehrson -This document is released under the libpng license. -For conditions of distribution and use, see the disclaimer -and license in png.h. diff --git a/Makefile.am b/Makefile.am deleted file mode 100644 index f21107e65..000000000 --- a/Makefile.am +++ /dev/null @@ -1,392 +0,0 @@ -# Makefile.am, the source file for Makefile.in (and hence Makefile), is -# -# Copyright (c) 2018 Cosmin Truta -# Copyright (c) 2004-2016 Glenn Randers-Pehrson -# -# This code is released under the libpng license. -# For conditions of distribution and use, see the disclaimer -# and license in png.h - -PNGLIB_BASENAME= libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@ - -ACLOCAL_AMFLAGS = -I scripts - -# test programs - run on make check, make distcheck -check_PROGRAMS= pngtest pngunknown pngstest pngvalid pngimage pngcp -if HAVE_CLOCK_GETTIME -check_PROGRAMS += timepng -endif - -# Utilities - installed -bin_PROGRAMS= pngfix png-fix-itxt - -# This ensures that pnglibconf.h gets built at the start of 'make all' or -# 'make check', but it does not add dependencies to the individual programs, -# this is done below. -# -# IMPORTANT: always add the object modules of new programs to the list below -# because otherwise the sequence 'configure; make new-program' will *sometimes* -# result in the installed (system) pnglibconf.h being used and the result is -# always wrong and always very confusing. -BUILT_SOURCES = pnglibconf.h - -pngtest_SOURCES = pngtest.c -pngtest_LDADD = libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@.la - -pngvalid_SOURCES = contrib/libtests/pngvalid.c -pngvalid_LDADD = libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@.la - -pngstest_SOURCES = contrib/libtests/pngstest.c -pngstest_LDADD = libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@.la - -pngunknown_SOURCES = contrib/libtests/pngunknown.c -pngunknown_LDADD = libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@.la - -pngimage_SOURCES = contrib/libtests/pngimage.c -pngimage_LDADD = libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@.la - -timepng_SOURCES = contrib/libtests/timepng.c -timepng_LDADD = libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@.la - -pngfix_SOURCES = contrib/tools/pngfix.c -pngfix_LDADD = libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@.la - -png_fix_itxt_SOURCES = contrib/tools/png-fix-itxt.c - -pngcp_SOURCES = contrib/tools/pngcp.c -pngcp_LDADD = libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@.la - -# Generally these are single line shell scripts to run a test with a particular -# set of parameters: -TESTS =\ - tests/pngtest-all\ - tests/pngvalid-gamma-16-to-8 tests/pngvalid-gamma-alpha-mode\ - tests/pngvalid-gamma-background tests/pngvalid-gamma-expand16-alpha-mode\ - tests/pngvalid-gamma-expand16-background\ - tests/pngvalid-gamma-expand16-transform tests/pngvalid-gamma-sbit\ - tests/pngvalid-gamma-threshold tests/pngvalid-gamma-transform\ - tests/pngvalid-progressive-size\ - tests/pngvalid-progressive-interlace-standard\ - tests/pngvalid-transform\ - tests/pngvalid-progressive-standard tests/pngvalid-standard\ - tests/pngstest-1.8 tests/pngstest-1.8-alpha tests/pngstest-linear\ - tests/pngstest-linear-alpha tests/pngstest-none tests/pngstest-none-alpha\ - tests/pngstest-sRGB tests/pngstest-sRGB-alpha tests/pngunknown-IDAT\ - tests/pngunknown-discard tests/pngunknown-if-safe tests/pngunknown-sAPI\ - tests/pngunknown-sTER tests/pngunknown-save tests/pngunknown-vpAg\ - tests/pngimage-quick tests/pngimage-full - -# man pages -dist_man_MANS= libpng.3 libpngpf.3 png.5 - -# generate the -config scripts if required -binconfigs= libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@-config -EXTRA_SCRIPTS= libpng-config libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@-config -bin_SCRIPTS= @binconfigs@ - -# rules to build libpng, only build the old library on request -lib_LTLIBRARIES=libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@.la -# EXTRA_LTLIBRARIES= libpng.la -libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@_la_SOURCES = png.c pngerror.c\ - pngget.c pngmem.c pngpread.c pngread.c pngrio.c pngrtran.c pngrutil.c\ - pngset.c pngtrans.c pngwio.c pngwrite.c pngwtran.c pngwutil.c\ - png.h pngconf.h pngdebug.h pnginfo.h pngpriv.h pngstruct.h pngusr.dfa - -if PNG_ARM_NEON -libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@_la_SOURCES += arm/arm_init.c\ - arm/filter_neon.S arm/filter_neon_intrinsics.c \ - arm/palette_neon_intrinsics.c -endif - -if PNG_MIPS_MSA -libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@_la_SOURCES += mips/mips_init.c\ - mips/filter_msa_intrinsics.c -endif - -if PNG_INTEL_SSE -libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@_la_SOURCES += intel/intel_init.c\ - intel/filter_sse2_intrinsics.c -endif - -if PNG_POWERPC_VSX -libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@_la_SOURCES += powerpc/powerpc_init.c\ - powerpc/filter_vsx_intrinsics.c -endif - -nodist_libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@_la_SOURCES = pnglibconf.h - -libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@_la_LDFLAGS = -no-undefined -export-dynamic \ - -version-number @PNGLIB_MAJOR@@PNGLIB_MINOR@:@PNGLIB_RELEASE@:0 - -if HAVE_LD_VERSION_SCRIPT -# Versioned symbols and restricted exports -if HAVE_SOLARIS_LD - libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@_la_LDFLAGS += -Wl,-M -Wl,libpng.vers -else - libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@_la_LDFLAGS += -Wl,--version-script=libpng.vers -endif - - libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@_la_DEPENDENCIES = libpng.vers -else -# Only restricted exports when possible - libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@_la_LDFLAGS += -export-symbols libpng.sym - libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@_la_DEPENDENCIES = libpng.sym -endif - -#distribute headers in /usr/include/libpng/* -pkgincludedir= $(includedir)/$(PNGLIB_BASENAME) -pkginclude_HEADERS= png.h pngconf.h -nodist_pkginclude_HEADERS= pnglibconf.h - -# pkg-config stuff, note that libpng.pc is always required in order -# to get the correct library -pkgconfigdir = @pkgconfigdir@ -pkgconfig_DATA = libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@.pc - -# Extra source distribution files, '${srcdir}' is used below to stop build files -# from those directories being included. This only works if the configure is -# not done in the source directory! -EXTRA_DIST= \ - ANNOUNCE AUTHORS CHANGES INSTALL LICENSE README TODO TRADEMARK \ - pngtest.png pngbar.png pngnow.png pngbar.jpg autogen.sh \ - ${srcdir}/contrib ${srcdir}/projects ${srcdir}/scripts \ - $(TESTS) $(XFAIL_TESTS) tests/pngstest \ - CMakeLists.txt example.c libpng-manual.txt - -SCRIPT_CLEANFILES=scripts/*.out scripts/*.chk - -CLEANFILES= *.tf? pngout.png libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@.pc \ - libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@-config libpng.vers libpng.sym \ - check.new pnglibconf.h pngprefix.h symbols.new pngtest-log.txt \ - pnglibconf.out pnglibconf.c pnglibconf.pre pnglibconf.dfn \ - $(SCRIPT_CLEANFILES) - -MAINTAINERCLEANFILES = Makefile.in aclocal.m4 config.guess config.h.in \ -config.sub configure depcomp install-sh ltmain.sh missing - -# PNG_COPTS give extra options for the C compiler to be used on all compilation -# steps (unless targe_CFLAGS is specified; that will take precedence over -# AM_CFLAGS) -PNG_COPTS = @PNG_COPTS@ -AM_CFLAGS = ${PNG_COPTS} - -# DFNCPP is normally just CPP - the C preprocessor - but on Solaris and maybe -# other operating systems (NeXT?) the C preprocessor selected by configure -# checks input tokens for validity - effectively it performs part of the ANSI-C -# parsing - and therefore fails with the .df files. configure.ac has special -# checks for this and sets DFNCPP appropriately. -DFNCPP = @DFNCPP@ - -SUFFIXES = .chk .out - -$(PNGLIB_BASENAME).pc: libpng.pc - cp libpng.pc $@ - -$(PNGLIB_BASENAME)-config: libpng-config - cp libpng-config $@ - -scripts/sym.out scripts/vers.out: png.h pngconf.h pnglibconf.h -scripts/prefix.out: png.h pngconf.h pnglibconf.out -scripts/symbols.out: png.h pngconf.h $(srcdir)/scripts/pnglibconf.h.prebuilt -scripts/intprefix.out: pnglibconf.h - -libpng.sym: scripts/sym.out - rm -f $@ - cp $? $@ -libpng.vers: scripts/vers.out - rm -f $@ - cp $? $@ - -if DO_PNG_PREFIX -# Rename functions in scripts/prefix.out with a PNG_PREFIX prefix. -# Rename macros in scripts/macro.lst from PNG_PREFIXpng_ to PNG_ (the actual -# implementation of the macro). -pnglibconf.h: pnglibconf.out scripts/prefix.out scripts/macro.lst - rm -f $@ - $(AWK) 's==0 && NR>1{print prev}\ - s==0{prev=$$0}\ - s==1{print "#define", $$1, "@PNG_PREFIX@" $$1}\ - s==2{print "#define @PNG_PREFIX@png_" $$1, "PNG_" $$1}\ - END{print prev}' s=0 pnglibconf.out s=1 scripts/prefix.out\ - s=2 ${srcdir}/scripts/macro.lst >pnglibconf.tf8 - mv pnglibconf.tf8 $@ - -pngprefix.h: scripts/intprefix.out - rm -f pngprefix.tf1 - $(AWK) '{print "#define", $$1, "@PNG_PREFIX@" $$1}' $? >pngprefix.tf1 - mv pngprefix.tf1 $@ -else -pnglibconf.h: pnglibconf.out - rm -f $@ - cp $? $@ - -pngprefix.h: # is empty - :>$@ -endif - -$(srcdir)/scripts/pnglibconf.h.prebuilt: - @echo "Attempting to build $@" >&2 - @echo "This is a machine generated file, but if you want to make" >&2 - @echo "a new one simply make 'scripts/pnglibconf.out', copy that" >&2 - @echo "AND set PNG_ZLIB_VERNUM to 0 (you MUST do this)" >&2 - @exit 1 - -# The following is necessary to ensure that the local pnglibconf.h is used, not -# an installed one (this can happen immediately after on a clean system if -# 'make test' is the first thing the user does.) Only files which include -# one of the png source files (typically png.h or pngpriv.h) need to be listed -# here: -pngtest.o: pnglibconf.h - -contrib/libtests/makepng.o: pnglibconf.h -contrib/libtests/pngstest.o: pnglibconf.h -contrib/libtests/pngunknown.o: pnglibconf.h -contrib/libtests/pngimage.o: pnglibconf.h -contrib/libtests/pngvalid.o: pnglibconf.h -contrib/libtests/readpng.o: pnglibconf.h -contrib/libtests/tarith.o: pnglibconf.h -contrib/libtests/timepng.o: pnglibconf.h - -contrib/tools/makesRGB.o: pnglibconf.h -contrib/tools/pngfix.o: pnglibconf.h -contrib/tools/pngcp.o: pnglibconf.h - -# We must use -DPNG_NO_USE_READ_MACROS here even when the library may actually -# be built with PNG_USE_READ_MACROS; this prevents the read macros from -# interfering with the symbol file format. -SYMBOL_CFLAGS = -DPNGLIB_LIBNAME='PNG@PNGLIB_MAJOR@@PNGLIB_MINOR@_0'\ - -DPNGLIB_VERSION='@PNGLIB_VERSION@'\ - -DSYMBOL_PREFIX='$(SYMBOL_PREFIX)'\ - -DPNG_NO_USE_READ_MACROS -DPNG_BUILDING_SYMBOL_TABLE - -if DO_PNG_PREFIX -SYMBOL_CFLAGS += -DPNG_PREFIX='@PNG_PREFIX@' -endif - -.c.out: - rm -f $@ $*.tf[12] - test -d scripts || mkdir scripts || test -d scripts - $(DFNCPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES)\ - $(CPPFLAGS) $(SYMBOL_CFLAGS) $< > $*.tf1 - $(AWK) -f "${srcdir}/scripts/dfn.awk" out="$*.tf2" $*.tf1 1>&2 - rm -f $*.tf1 - mv $*.tf2 $@ - -# The .c file for pnglibconf.h is machine generated -pnglibconf.c: scripts/pnglibconf.dfa scripts/options.awk pngconf.h pngusr.dfa $(DFA_XTRA) - rm -f $@ $*.tf[45] - $(AWK) -f ${srcdir}/scripts/options.awk out=$*.tf4 version=search\ - ${srcdir}/pngconf.h ${srcdir}/scripts/pnglibconf.dfa\ - ${srcdir}/pngusr.dfa $(DFA_XTRA) 1>&2 - $(AWK) -f ${srcdir}/scripts/options.awk out=$*.tf5 $*.tf4 1>&2 - rm $*.tf4 - mv $*.tf5 $@ - -# Symbol checks (.def and .out files should match) -scripts/symbols.chk: scripts/checksym.awk scripts/symbols.def scripts/symbols.out - -.out.chk: - rm -f $@ $*.new - $(AWK) -f ${srcdir}/scripts/checksym.awk ${srcdir}/scripts/${*F}.def\ - of="$*.new" $< >&2 - mv $*.new $@ - -# used on demand to regenerate the standard header, CPPFLAGS should -# be empty - no non-standard defines -scripts/pnglibconf.c: scripts/pnglibconf.dfa scripts/options.awk pngconf.h - rm -f $@ pnglibconf.tf[67] - test -z "$(CPPFLAGS)" - echo "com @PNGLIB_VERSION@ STANDARD API DEFINITION" |\ - $(AWK) -f ${srcdir}/scripts/options.awk out=pnglibconf.tf6\ - logunsupported=1 version=search ${srcdir}/pngconf.h -\ - ${srcdir}/scripts/pnglibconf.dfa 1>&2 - $(AWK) -f ${srcdir}/scripts/options.awk out=pnglibconf.tf7\ - pnglibconf.tf6 1>&2 - rm pnglibconf.tf6 - mv pnglibconf.tf7 $@ - -$(libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@_la_OBJECTS): png.h pngconf.h \ - pnglibconf.h pngpriv.h pngdebug.h pnginfo.h pngstruct.h pngprefix.h - -test: check-am - -# Extra checks -check: scripts/symbols.chk - -# Don't distribute the generated script files -dist-hook: - cd '$(top_distdir)'; rm -f $(SCRIPT_CLEANFILES) - -# Make links between installed files with release-specific names and the generic -# file names. If this install rule is run the generic names will be deleted and -# recreated - this has obvious issues for systems with multiple installations. - -install-header-links: - @set -ex; cd '$(DESTDIR)$(includedir)'; for f in $(HEADERS); do \ - rm -f "$$f"; $(LN_S) "$(PNGLIB_BASENAME)/$$f" "$$f"; done - -uninstall-header-links: - cd '$(DESTDIR)$(includedir)'; rm -f $(HEADERS) - -install-libpng-pc: - @set -ex; cd '$(DESTDIR)$(pkgconfigdir)'; rm -f libpng.pc; \ - $(LN_S) '$(PNGLIB_BASENAME).pc' libpng.pc - -uninstall-libpng-pc: - rm -f '$(DESTDIR)$(pkgconfigdir)/libpng.pc' - -# EXT_LIST is a list of the possibly library directory extensions, this exists -# because we can't find a good way of discovering the file extensions that are -# actually installed on a given system, so instead we check for every extension -# we have seen. - -EXT_LIST = a dll.a so so.@PNGLIB_MAJOR@@PNGLIB_MINOR@.@PNGLIB_RELEASE@ la sl dylib - -install-library-links: - @set -x; cd '$(DESTDIR)$(libdir)';\ - for ext in $(EXT_LIST); do\ - rm -f "libpng.$$ext";\ - if test -f "$(PNGLIB_BASENAME).$$ext"; then\ - $(LN_S) "$(PNGLIB_BASENAME).$$ext" "libpng.$$ext" || exit 1;\ - fi;\ - done - -uninstall-library-links: - @set -x; cd '$(DESTDIR)$(libdir)'; for ext in $(EXT_LIST); do\ - rm -f "libpng.$$ext"; done - -install-libpng-config: - @set -ex; cd '$(DESTDIR)$(bindir)'; rm -f libpng-config; \ - $(LN_S) '$(PNGLIB_BASENAME)-config' libpng-config - -uninstall-libpng-config: - rm -f '$(DESTDIR)$(bindir)/libpng-config' - -if DO_INSTALL_LINKS -# If --enable-unversioned-links is specified the header and lib file links -# will be automatically made on a 'make install': - -install-data-hook: install-header-links -uninstall-hook: uninstall-header-links -install-exec-hook: install-library-links -uninstall-hook: uninstall-library-links -endif - -if DO_INSTALL_LIBPNG_PC -# Likewise, --install-pc causes libpng.pc to be constructed: - -install-data-hook: install-libpng-pc -uninstall-hook: uninstall-libpng-pc -endif - -if DO_INSTALL_LIBPNG_CONFIG -# And --install-config: - -install-exec-hook: install-libpng-config -uninstall-hook: uninstall-libpng-config -endif - -# The following addition ensures that 'make all' always builds the test programs -# too. It used to, but some change either in libpng or configure stopped this -# working. -all-am: $(check_PROGRAMS) diff --git a/Makefile.in b/Makefile.in deleted file mode 100644 index 31a82d25a..000000000 --- a/Makefile.in +++ /dev/null @@ -1,2420 +0,0 @@ -# Makefile.in generated by automake 1.16.1 from Makefile.am. -# @configure_input@ - -# Copyright (C) 1994-2018 Free Software Foundation, Inc. - -# This Makefile.in is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY, to the extent permitted by law; without -# even the implied warranty of MERCHANTABILITY or FITNESS FOR A -# PARTICULAR PURPOSE. - -@SET_MAKE@ - -# Makefile.am, the source file for Makefile.in (and hence Makefile), is -# -# Copyright (c) 2018 Cosmin Truta -# Copyright (c) 2004-2016 Glenn Randers-Pehrson -# -# This code is released under the libpng license. -# For conditions of distribution and use, see the disclaimer -# and license in png.h - - - - - -VPATH = @srcdir@ -am__is_gnu_make = { \ - if test -z '$(MAKELEVEL)'; then \ - false; \ - elif test -n '$(MAKE_HOST)'; then \ - true; \ - elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \ - true; \ - else \ - false; \ - fi; \ -} -am__make_running_with_option = \ - case $${target_option-} in \ - ?) ;; \ - *) echo "am__make_running_with_option: internal error: invalid" \ - "target option '$${target_option-}' specified" >&2; \ - exit 1;; \ - esac; \ - has_opt=no; \ - sane_makeflags=$$MAKEFLAGS; \ - if $(am__is_gnu_make); then \ - sane_makeflags=$$MFLAGS; \ - else \ - case $$MAKEFLAGS in \ - *\\[\ \ ]*) \ - bs=\\; \ - sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ - | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ - esac; \ - fi; \ - skip_next=no; \ - strip_trailopt () \ - { \ - flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ - }; \ - for flg in $$sane_makeflags; do \ - test $$skip_next = yes && { skip_next=no; continue; }; \ - case $$flg in \ - *=*|--*) continue;; \ - -*I) strip_trailopt 'I'; skip_next=yes;; \ - -*I?*) strip_trailopt 'I';; \ - -*O) strip_trailopt 'O'; skip_next=yes;; \ - -*O?*) strip_trailopt 'O';; \ - -*l) strip_trailopt 'l'; skip_next=yes;; \ - -*l?*) strip_trailopt 'l';; \ - -[dEDm]) skip_next=yes;; \ - -[JT]) skip_next=yes;; \ - esac; \ - case $$flg in \ - *$$target_option*) has_opt=yes; break;; \ - esac; \ - done; \ - test $$has_opt = yes -am__make_dryrun = (target_option=n; $(am__make_running_with_option)) -am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) -pkgdatadir = $(datadir)/@PACKAGE@ -pkglibdir = $(libdir)/@PACKAGE@ -pkglibexecdir = $(libexecdir)/@PACKAGE@ -am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd -install_sh_DATA = $(install_sh) -c -m 644 -install_sh_PROGRAM = $(install_sh) -c -install_sh_SCRIPT = $(install_sh) -c -INSTALL_HEADER = $(INSTALL_DATA) -transform = $(program_transform_name) -NORMAL_INSTALL = : -PRE_INSTALL = : -POST_INSTALL = : -NORMAL_UNINSTALL = : -PRE_UNINSTALL = : -POST_UNINSTALL = : -build_triplet = @build@ -host_triplet = @host@ -check_PROGRAMS = pngtest$(EXEEXT) pngunknown$(EXEEXT) \ - pngstest$(EXEEXT) pngvalid$(EXEEXT) pngimage$(EXEEXT) \ - pngcp$(EXEEXT) $(am__EXEEXT_1) -@HAVE_CLOCK_GETTIME_TRUE@am__append_1 = timepng -bin_PROGRAMS = pngfix$(EXEEXT) png-fix-itxt$(EXEEXT) -@PNG_ARM_NEON_TRUE@am__append_2 = arm/arm_init.c\ -@PNG_ARM_NEON_TRUE@ arm/filter_neon.S arm/filter_neon_intrinsics.c \ -@PNG_ARM_NEON_TRUE@ arm/palette_neon_intrinsics.c - -@PNG_MIPS_MSA_TRUE@am__append_3 = mips/mips_init.c\ -@PNG_MIPS_MSA_TRUE@ mips/filter_msa_intrinsics.c - -@PNG_INTEL_SSE_TRUE@am__append_4 = intel/intel_init.c\ -@PNG_INTEL_SSE_TRUE@ intel/filter_sse2_intrinsics.c - -@PNG_POWERPC_VSX_TRUE@am__append_5 = powerpc/powerpc_init.c\ -@PNG_POWERPC_VSX_TRUE@ powerpc/filter_vsx_intrinsics.c - - -# Versioned symbols and restricted exports -@HAVE_LD_VERSION_SCRIPT_TRUE@@HAVE_SOLARIS_LD_TRUE@am__append_6 = -Wl,-M -Wl,libpng.vers -@HAVE_LD_VERSION_SCRIPT_TRUE@@HAVE_SOLARIS_LD_FALSE@am__append_7 = -Wl,--version-script=libpng.vers -# Only restricted exports when possible -@HAVE_LD_VERSION_SCRIPT_FALSE@am__append_8 = -export-symbols libpng.sym -@DO_PNG_PREFIX_TRUE@am__append_9 = -DPNG_PREFIX='@PNG_PREFIX@' -subdir = . -ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -am__aclocal_m4_deps = $(top_srcdir)/scripts/libtool.m4 \ - $(top_srcdir)/scripts/ltoptions.m4 \ - $(top_srcdir)/scripts/ltsugar.m4 \ - $(top_srcdir)/scripts/ltversion.m4 \ - $(top_srcdir)/scripts/lt~obsolete.m4 \ - $(top_srcdir)/configure.ac -am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ - $(ACLOCAL_M4) -DIST_COMMON = $(srcdir)/Makefile.am $(top_srcdir)/configure \ - $(am__configure_deps) $(pkginclude_HEADERS) $(am__DIST_COMMON) -am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \ - configure.lineno config.status.lineno -mkinstalldirs = $(install_sh) -d -CONFIG_HEADER = config.h -CONFIG_CLEAN_FILES = libpng.pc libpng-config -CONFIG_CLEAN_VPATH_FILES = -am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(libdir)" \ - "$(DESTDIR)$(bindir)" "$(DESTDIR)$(man3dir)" \ - "$(DESTDIR)$(man5dir)" "$(DESTDIR)$(pkgconfigdir)" \ - "$(DESTDIR)$(pkgincludedir)" "$(DESTDIR)$(pkgincludedir)" -@HAVE_CLOCK_GETTIME_TRUE@am__EXEEXT_1 = timepng$(EXEEXT) -PROGRAMS = $(bin_PROGRAMS) -am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; -am__vpath_adj = case $$p in \ - $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ - *) f=$$p;; \ - esac; -am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; -am__install_max = 40 -am__nobase_strip_setup = \ - srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` -am__nobase_strip = \ - for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" -am__nobase_list = $(am__nobase_strip_setup); \ - for p in $$list; do echo "$$p $$p"; done | \ - sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ - $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ - if (++n[$$2] == $(am__install_max)) \ - { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ - END { for (dir in files) print dir, files[dir] }' -am__base_list = \ - sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ - sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' -am__uninstall_files_from_dir = { \ - test -z "$$files" \ - || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \ - || { echo " ( cd '$$dir' && rm -f" $$files ")"; \ - $(am__cd) "$$dir" && rm -f $$files; }; \ - } -LTLIBRARIES = $(lib_LTLIBRARIES) -libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@_la_LIBADD = -am__libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@_la_SOURCES_DIST = png.c \ - pngerror.c pngget.c pngmem.c pngpread.c pngread.c pngrio.c \ - pngrtran.c pngrutil.c pngset.c pngtrans.c pngwio.c pngwrite.c \ - pngwtran.c pngwutil.c png.h pngconf.h pngdebug.h pnginfo.h \ - pngpriv.h pngstruct.h pngusr.dfa arm/arm_init.c \ - arm/filter_neon.S arm/filter_neon_intrinsics.c \ - arm/palette_neon_intrinsics.c mips/mips_init.c \ - mips/filter_msa_intrinsics.c intel/intel_init.c \ - intel/filter_sse2_intrinsics.c powerpc/powerpc_init.c \ - powerpc/filter_vsx_intrinsics.c -am__dirstamp = $(am__leading_dot)dirstamp -@PNG_ARM_NEON_TRUE@am__objects_1 = arm/arm_init.lo arm/filter_neon.lo \ -@PNG_ARM_NEON_TRUE@ arm/filter_neon_intrinsics.lo \ -@PNG_ARM_NEON_TRUE@ arm/palette_neon_intrinsics.lo -@PNG_MIPS_MSA_TRUE@am__objects_2 = mips/mips_init.lo \ -@PNG_MIPS_MSA_TRUE@ mips/filter_msa_intrinsics.lo -@PNG_INTEL_SSE_TRUE@am__objects_3 = intel/intel_init.lo \ -@PNG_INTEL_SSE_TRUE@ intel/filter_sse2_intrinsics.lo -@PNG_POWERPC_VSX_TRUE@am__objects_4 = powerpc/powerpc_init.lo \ -@PNG_POWERPC_VSX_TRUE@ powerpc/filter_vsx_intrinsics.lo -am_libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@_la_OBJECTS = png.lo pngerror.lo \ - pngget.lo pngmem.lo pngpread.lo pngread.lo pngrio.lo \ - pngrtran.lo pngrutil.lo pngset.lo pngtrans.lo pngwio.lo \ - pngwrite.lo pngwtran.lo pngwutil.lo $(am__objects_1) \ - $(am__objects_2) $(am__objects_3) $(am__objects_4) -nodist_libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@_la_OBJECTS = -libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@_la_OBJECTS = \ - $(am_libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@_la_OBJECTS) \ - $(nodist_libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@_la_OBJECTS) -AM_V_lt = $(am__v_lt_@AM_V@) -am__v_lt_ = $(am__v_lt_@AM_DEFAULT_V@) -am__v_lt_0 = --silent -am__v_lt_1 = -libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@_la_LINK = $(LIBTOOL) $(AM_V_lt) \ - --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=link \ - $(CCLD) $(AM_CFLAGS) $(CFLAGS) \ - $(libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@_la_LDFLAGS) $(LDFLAGS) -o \ - $@ -am_png_fix_itxt_OBJECTS = contrib/tools/png-fix-itxt.$(OBJEXT) -png_fix_itxt_OBJECTS = $(am_png_fix_itxt_OBJECTS) -png_fix_itxt_LDADD = $(LDADD) -am_pngcp_OBJECTS = contrib/tools/pngcp.$(OBJEXT) -pngcp_OBJECTS = $(am_pngcp_OBJECTS) -pngcp_DEPENDENCIES = libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@.la -am_pngfix_OBJECTS = contrib/tools/pngfix.$(OBJEXT) -pngfix_OBJECTS = $(am_pngfix_OBJECTS) -pngfix_DEPENDENCIES = libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@.la -am_pngimage_OBJECTS = contrib/libtests/pngimage.$(OBJEXT) -pngimage_OBJECTS = $(am_pngimage_OBJECTS) -pngimage_DEPENDENCIES = libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@.la -am_pngstest_OBJECTS = contrib/libtests/pngstest.$(OBJEXT) -pngstest_OBJECTS = $(am_pngstest_OBJECTS) -pngstest_DEPENDENCIES = libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@.la -am_pngtest_OBJECTS = pngtest.$(OBJEXT) -pngtest_OBJECTS = $(am_pngtest_OBJECTS) -pngtest_DEPENDENCIES = libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@.la -am_pngunknown_OBJECTS = contrib/libtests/pngunknown.$(OBJEXT) -pngunknown_OBJECTS = $(am_pngunknown_OBJECTS) -pngunknown_DEPENDENCIES = libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@.la -am_pngvalid_OBJECTS = contrib/libtests/pngvalid.$(OBJEXT) -pngvalid_OBJECTS = $(am_pngvalid_OBJECTS) -pngvalid_DEPENDENCIES = libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@.la -am_timepng_OBJECTS = contrib/libtests/timepng.$(OBJEXT) -timepng_OBJECTS = $(am_timepng_OBJECTS) -timepng_DEPENDENCIES = libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@.la -SCRIPTS = $(bin_SCRIPTS) -AM_V_P = $(am__v_P_@AM_V@) -am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) -am__v_P_0 = false -am__v_P_1 = : -AM_V_GEN = $(am__v_GEN_@AM_V@) -am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) -am__v_GEN_0 = @echo " GEN " $@; -am__v_GEN_1 = -AM_V_at = $(am__v_at_@AM_V@) -am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) -am__v_at_0 = @ -am__v_at_1 = -DEFAULT_INCLUDES = -I.@am__isrc@ -depcomp = $(SHELL) $(top_srcdir)/depcomp -am__maybe_remake_depfiles = depfiles -am__depfiles_remade = ./$(DEPDIR)/png.Plo ./$(DEPDIR)/pngerror.Plo \ - ./$(DEPDIR)/pngget.Plo ./$(DEPDIR)/pngmem.Plo \ - ./$(DEPDIR)/pngpread.Plo ./$(DEPDIR)/pngread.Plo \ - ./$(DEPDIR)/pngrio.Plo ./$(DEPDIR)/pngrtran.Plo \ - ./$(DEPDIR)/pngrutil.Plo ./$(DEPDIR)/pngset.Plo \ - ./$(DEPDIR)/pngtest.Po ./$(DEPDIR)/pngtrans.Plo \ - ./$(DEPDIR)/pngwio.Plo ./$(DEPDIR)/pngwrite.Plo \ - ./$(DEPDIR)/pngwtran.Plo ./$(DEPDIR)/pngwutil.Plo \ - arm/$(DEPDIR)/arm_init.Plo arm/$(DEPDIR)/filter_neon.Plo \ - arm/$(DEPDIR)/filter_neon_intrinsics.Plo \ - arm/$(DEPDIR)/palette_neon_intrinsics.Plo \ - contrib/libtests/$(DEPDIR)/pngimage.Po \ - contrib/libtests/$(DEPDIR)/pngstest.Po \ - contrib/libtests/$(DEPDIR)/pngunknown.Po \ - contrib/libtests/$(DEPDIR)/pngvalid.Po \ - contrib/libtests/$(DEPDIR)/timepng.Po \ - contrib/tools/$(DEPDIR)/png-fix-itxt.Po \ - contrib/tools/$(DEPDIR)/pngcp.Po \ - contrib/tools/$(DEPDIR)/pngfix.Po \ - intel/$(DEPDIR)/filter_sse2_intrinsics.Plo \ - intel/$(DEPDIR)/intel_init.Plo \ - mips/$(DEPDIR)/filter_msa_intrinsics.Plo \ - mips/$(DEPDIR)/mips_init.Plo \ - powerpc/$(DEPDIR)/filter_vsx_intrinsics.Plo \ - powerpc/$(DEPDIR)/powerpc_init.Plo -am__mv = mv -f -CPPASCOMPILE = $(CCAS) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \ - $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CCASFLAGS) $(CCASFLAGS) -LTCPPASCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \ - $(LIBTOOLFLAGS) --mode=compile $(CCAS) $(DEFS) \ - $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \ - $(AM_CCASFLAGS) $(CCASFLAGS) -AM_V_CPPAS = $(am__v_CPPAS_@AM_V@) -am__v_CPPAS_ = $(am__v_CPPAS_@AM_DEFAULT_V@) -am__v_CPPAS_0 = @echo " CPPAS " $@; -am__v_CPPAS_1 = -COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ - $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -LTCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \ - $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) \ - $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \ - $(AM_CFLAGS) $(CFLAGS) -AM_V_CC = $(am__v_CC_@AM_V@) -am__v_CC_ = $(am__v_CC_@AM_DEFAULT_V@) -am__v_CC_0 = @echo " CC " $@; -am__v_CC_1 = -CCLD = $(CC) -LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \ - $(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \ - $(AM_LDFLAGS) $(LDFLAGS) -o $@ -AM_V_CCLD = $(am__v_CCLD_@AM_V@) -am__v_CCLD_ = $(am__v_CCLD_@AM_DEFAULT_V@) -am__v_CCLD_0 = @echo " CCLD " $@; -am__v_CCLD_1 = -SOURCES = $(libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@_la_SOURCES) \ - $(nodist_libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@_la_SOURCES) \ - $(png_fix_itxt_SOURCES) $(pngcp_SOURCES) $(pngfix_SOURCES) \ - $(pngimage_SOURCES) $(pngstest_SOURCES) $(pngtest_SOURCES) \ - $(pngunknown_SOURCES) $(pngvalid_SOURCES) $(timepng_SOURCES) -DIST_SOURCES = \ - $(am__libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@_la_SOURCES_DIST) \ - $(png_fix_itxt_SOURCES) $(pngcp_SOURCES) $(pngfix_SOURCES) \ - $(pngimage_SOURCES) $(pngstest_SOURCES) $(pngtest_SOURCES) \ - $(pngunknown_SOURCES) $(pngvalid_SOURCES) $(timepng_SOURCES) -am__can_run_installinfo = \ - case $$AM_UPDATE_INFO_DIR in \ - n|no|NO) false;; \ - *) (install-info --version) >/dev/null 2>&1;; \ - esac -man3dir = $(mandir)/man3 -man5dir = $(mandir)/man5 -NROFF = nroff -MANS = $(dist_man_MANS) -DATA = $(pkgconfig_DATA) -HEADERS = $(nodist_pkginclude_HEADERS) $(pkginclude_HEADERS) -am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) \ - $(LISP)config.h.in -# Read a list of newline-separated strings from the standard input, -# and print each of them once, without duplicates. Input order is -# *not* preserved. -am__uniquify_input = $(AWK) '\ - BEGIN { nonempty = 0; } \ - { items[$$0] = 1; nonempty = 1; } \ - END { if (nonempty) { for (i in items) print i; }; } \ -' -# Make sure the list of sources is unique. This is necessary because, -# e.g., the same source file might be shared among _SOURCES variables -# for different programs/libraries. -am__define_uniq_tagged_files = \ - list='$(am__tagged_files)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | $(am__uniquify_input)` -ETAGS = etags -CTAGS = ctags -CSCOPE = cscope -AM_RECURSIVE_TARGETS = cscope check recheck -am__tty_colors_dummy = \ - mgn= red= grn= lgn= blu= brg= std=; \ - am__color_tests=no -am__tty_colors = { \ - $(am__tty_colors_dummy); \ - if test "X$(AM_COLOR_TESTS)" = Xno; then \ - am__color_tests=no; \ - elif test "X$(AM_COLOR_TESTS)" = Xalways; then \ - am__color_tests=yes; \ - elif test "X$$TERM" != Xdumb && { test -t 1; } 2>/dev/null; then \ - am__color_tests=yes; \ - fi; \ - if test $$am__color_tests = yes; then \ - red=''; \ - grn=''; \ - lgn=''; \ - blu=''; \ - mgn=''; \ - brg=''; \ - std=''; \ - fi; \ -} -am__recheck_rx = ^[ ]*:recheck:[ ]* -am__global_test_result_rx = ^[ ]*:global-test-result:[ ]* -am__copy_in_global_log_rx = ^[ ]*:copy-in-global-log:[ ]* -# A command that, given a newline-separated list of test names on the -# standard input, print the name of the tests that are to be re-run -# upon "make recheck". -am__list_recheck_tests = $(AWK) '{ \ - recheck = 1; \ - while ((rc = (getline line < ($$0 ".trs"))) != 0) \ - { \ - if (rc < 0) \ - { \ - if ((getline line2 < ($$0 ".log")) < 0) \ - recheck = 0; \ - break; \ - } \ - else if (line ~ /$(am__recheck_rx)[nN][Oo]/) \ - { \ - recheck = 0; \ - break; \ - } \ - else if (line ~ /$(am__recheck_rx)[yY][eE][sS]/) \ - { \ - break; \ - } \ - }; \ - if (recheck) \ - print $$0; \ - close ($$0 ".trs"); \ - close ($$0 ".log"); \ -}' -# A command that, given a newline-separated list of test names on the -# standard input, create the global log from their .trs and .log files. -am__create_global_log = $(AWK) ' \ -function fatal(msg) \ -{ \ - print "fatal: making $@: " msg | "cat >&2"; \ - exit 1; \ -} \ -function rst_section(header) \ -{ \ - print header; \ - len = length(header); \ - for (i = 1; i <= len; i = i + 1) \ - printf "="; \ - printf "\n\n"; \ -} \ -{ \ - copy_in_global_log = 1; \ - global_test_result = "RUN"; \ - while ((rc = (getline line < ($$0 ".trs"))) != 0) \ - { \ - if (rc < 0) \ - fatal("failed to read from " $$0 ".trs"); \ - if (line ~ /$(am__global_test_result_rx)/) \ - { \ - sub("$(am__global_test_result_rx)", "", line); \ - sub("[ ]*$$", "", line); \ - global_test_result = line; \ - } \ - else if (line ~ /$(am__copy_in_global_log_rx)[nN][oO]/) \ - copy_in_global_log = 0; \ - }; \ - if (copy_in_global_log) \ - { \ - rst_section(global_test_result ": " $$0); \ - while ((rc = (getline line < ($$0 ".log"))) != 0) \ - { \ - if (rc < 0) \ - fatal("failed to read from " $$0 ".log"); \ - print line; \ - }; \ - printf "\n"; \ - }; \ - close ($$0 ".trs"); \ - close ($$0 ".log"); \ -}' -# Restructured Text title. -am__rst_title = { sed 's/.*/ & /;h;s/./=/g;p;x;s/ *$$//;p;g' && echo; } -# Solaris 10 'make', and several other traditional 'make' implementations, -# pass "-e" to $(SHELL), and POSIX 2008 even requires this. Work around it -# by disabling -e (using the XSI extension "set +e") if it's set. -am__sh_e_setup = case $$- in *e*) set +e;; esac -# Default flags passed to test drivers. -am__common_driver_flags = \ - --color-tests "$$am__color_tests" \ - --enable-hard-errors "$$am__enable_hard_errors" \ - --expect-failure "$$am__expect_failure" -# To be inserted before the command running the test. Creates the -# directory for the log if needed. Stores in $dir the directory -# containing $f, in $tst the test, in $log the log. Executes the -# developer- defined test setup AM_TESTS_ENVIRONMENT (if any), and -# passes TESTS_ENVIRONMENT. Set up options for the wrapper that -# will run the test scripts (or their associated LOG_COMPILER, if -# thy have one). -am__check_pre = \ -$(am__sh_e_setup); \ -$(am__vpath_adj_setup) $(am__vpath_adj) \ -$(am__tty_colors); \ -srcdir=$(srcdir); export srcdir; \ -case "$@" in \ - */*) am__odir=`echo "./$@" | sed 's|/[^/]*$$||'`;; \ - *) am__odir=.;; \ -esac; \ -test "x$$am__odir" = x"." || test -d "$$am__odir" \ - || $(MKDIR_P) "$$am__odir" || exit $$?; \ -if test -f "./$$f"; then dir=./; \ -elif test -f "$$f"; then dir=; \ -else dir="$(srcdir)/"; fi; \ -tst=$$dir$$f; log='$@'; \ -if test -n '$(DISABLE_HARD_ERRORS)'; then \ - am__enable_hard_errors=no; \ -else \ - am__enable_hard_errors=yes; \ -fi; \ -case " $(XFAIL_TESTS) " in \ - *[\ \ ]$$f[\ \ ]* | *[\ \ ]$$dir$$f[\ \ ]*) \ - am__expect_failure=yes;; \ - *) \ - am__expect_failure=no;; \ -esac; \ -$(AM_TESTS_ENVIRONMENT) $(TESTS_ENVIRONMENT) -# A shell command to get the names of the tests scripts with any registered -# extension removed (i.e., equivalently, the names of the test logs, with -# the '.log' extension removed). The result is saved in the shell variable -# '$bases'. This honors runtime overriding of TESTS and TEST_LOGS. Sadly, -# we cannot use something simpler, involving e.g., "$(TEST_LOGS:.log=)", -# since that might cause problem with VPATH rewrites for suffix-less tests. -# See also 'test-harness-vpath-rewrite.sh' and 'test-trs-basic.sh'. -am__set_TESTS_bases = \ - bases='$(TEST_LOGS)'; \ - bases=`for i in $$bases; do echo $$i; done | sed 's/\.log$$//'`; \ - bases=`echo $$bases` -RECHECK_LOGS = $(TEST_LOGS) -TEST_SUITE_LOG = test-suite.log -TEST_EXTENSIONS = @EXEEXT@ .test -LOG_DRIVER = $(SHELL) $(top_srcdir)/test-driver -LOG_COMPILE = $(LOG_COMPILER) $(AM_LOG_FLAGS) $(LOG_FLAGS) -am__set_b = \ - case '$@' in \ - */*) \ - case '$*' in \ - */*) b='$*';; \ - *) b=`echo '$@' | sed 's/\.log$$//'`; \ - esac;; \ - *) \ - b='$*';; \ - esac -am__test_logs1 = $(TESTS:=.log) -am__test_logs2 = $(am__test_logs1:@EXEEXT@.log=.log) -TEST_LOGS = $(am__test_logs2:.test.log=.log) -TEST_LOG_DRIVER = $(SHELL) $(top_srcdir)/test-driver -TEST_LOG_COMPILE = $(TEST_LOG_COMPILER) $(AM_TEST_LOG_FLAGS) \ - $(TEST_LOG_FLAGS) -am__DIST_COMMON = $(dist_man_MANS) $(srcdir)/Makefile.in \ - $(srcdir)/config.h.in $(srcdir)/libpng-config.in \ - $(srcdir)/libpng.pc.in AUTHORS INSTALL README TODO compile \ - config.guess config.sub depcomp install-sh ltmain.sh missing \ - test-driver -DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) -distdir = $(PACKAGE)-$(VERSION) -top_distdir = $(distdir) -am__remove_distdir = \ - if test -d "$(distdir)"; then \ - find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \ - && rm -rf "$(distdir)" \ - || { sleep 5 && rm -rf "$(distdir)"; }; \ - else :; fi -am__post_remove_distdir = $(am__remove_distdir) -DIST_ARCHIVES = $(distdir).tar.gz $(distdir).tar.xz -GZIP_ENV = --best -DIST_TARGETS = dist-xz dist-gzip -distuninstallcheck_listfiles = find . -type f -print -am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \ - | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$' -distcleancheck_listfiles = find . -type f -print - -#distribute headers in /usr/include/libpng/* -pkgincludedir = $(includedir)/$(PNGLIB_BASENAME) -ACLOCAL = @ACLOCAL@ -AMTAR = @AMTAR@ -AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ -AR = @AR@ -AS = @AS@ -AUTOCONF = @AUTOCONF@ -AUTOHEADER = @AUTOHEADER@ -AUTOMAKE = @AUTOMAKE@ -AWK = @AWK@ -CC = @CC@ -CCAS = @CCAS@ -CCASDEPMODE = @CCASDEPMODE@ -CCASFLAGS = @CCASFLAGS@ -CCDEPMODE = @CCDEPMODE@ -CFLAGS = @CFLAGS@ -CPP = @CPP@ -CPPFLAGS = @CPPFLAGS@ -CYGPATH_W = @CYGPATH_W@ -DEFS = @DEFS@ -DEPDIR = @DEPDIR@ - -# DFNCPP is normally just CPP - the C preprocessor - but on Solaris and maybe -# other operating systems (NeXT?) the C preprocessor selected by configure -# checks input tokens for validity - effectively it performs part of the ANSI-C -# parsing - and therefore fails with the .df files. configure.ac has special -# checks for this and sets DFNCPP appropriately. -DFNCPP = @DFNCPP@ -DLLTOOL = @DLLTOOL@ -DSYMUTIL = @DSYMUTIL@ -DUMPBIN = @DUMPBIN@ -ECHO_C = @ECHO_C@ -ECHO_N = @ECHO_N@ -ECHO_T = @ECHO_T@ -EGREP = @EGREP@ -EXEEXT = @EXEEXT@ -FGREP = @FGREP@ -GREP = @GREP@ -INSTALL = @INSTALL@ -INSTALL_DATA = @INSTALL_DATA@ -INSTALL_PROGRAM = @INSTALL_PROGRAM@ -INSTALL_SCRIPT = @INSTALL_SCRIPT@ -INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ -LD = @LD@ -LDFLAGS = @LDFLAGS@ -LIBOBJS = @LIBOBJS@ -LIBS = @LIBS@ -LIBTOOL = @LIBTOOL@ -LIPO = @LIPO@ -LN_S = @LN_S@ -LTLIBOBJS = @LTLIBOBJS@ -LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@ -MAINT = @MAINT@ -MAKEINFO = @MAKEINFO@ -MANIFEST_TOOL = @MANIFEST_TOOL@ -MKDIR_P = @MKDIR_P@ -NM = @NM@ -NMEDIT = @NMEDIT@ -OBJDUMP = @OBJDUMP@ -OBJEXT = @OBJEXT@ -OTOOL = @OTOOL@ -OTOOL64 = @OTOOL64@ -PACKAGE = @PACKAGE@ -PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ -PACKAGE_NAME = @PACKAGE_NAME@ -PACKAGE_STRING = @PACKAGE_STRING@ -PACKAGE_TARNAME = @PACKAGE_TARNAME@ -PACKAGE_URL = @PACKAGE_URL@ -PACKAGE_VERSION = @PACKAGE_VERSION@ -PATH_SEPARATOR = @PATH_SEPARATOR@ -PNGLIB_MAJOR = @PNGLIB_MAJOR@ -PNGLIB_MINOR = @PNGLIB_MINOR@ -PNGLIB_RELEASE = @PNGLIB_RELEASE@ -PNGLIB_VERSION = @PNGLIB_VERSION@ - -# PNG_COPTS give extra options for the C compiler to be used on all compilation -# steps (unless targe_CFLAGS is specified; that will take precedence over -# AM_CFLAGS) -PNG_COPTS = @PNG_COPTS@ -PNG_PREFIX = @PNG_PREFIX@ -POW_LIB = @POW_LIB@ -RANLIB = @RANLIB@ -SED = @SED@ -SET_MAKE = @SET_MAKE@ -SHELL = @SHELL@ -STRIP = @STRIP@ -SYMBOL_PREFIX = @SYMBOL_PREFIX@ -VERSION = @VERSION@ -abs_builddir = @abs_builddir@ -abs_srcdir = @abs_srcdir@ -abs_top_builddir = @abs_top_builddir@ -abs_top_srcdir = @abs_top_srcdir@ -ac_ct_AR = @ac_ct_AR@ -ac_ct_CC = @ac_ct_CC@ -ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ -am__include = @am__include@ -am__leading_dot = @am__leading_dot@ -am__quote = @am__quote@ -am__tar = @am__tar@ -am__untar = @am__untar@ - -# generate the -config scripts if required -binconfigs = libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@-config -bindir = @bindir@ -build = @build@ -build_alias = @build_alias@ -build_cpu = @build_cpu@ -build_os = @build_os@ -build_vendor = @build_vendor@ -builddir = @builddir@ -datadir = @datadir@ -datarootdir = @datarootdir@ -docdir = @docdir@ -dvidir = @dvidir@ -exec_prefix = @exec_prefix@ -host = @host@ -host_alias = @host_alias@ -host_cpu = @host_cpu@ -host_os = @host_os@ -host_vendor = @host_vendor@ -htmldir = @htmldir@ -includedir = @includedir@ -infodir = @infodir@ -install_sh = @install_sh@ -libdir = @libdir@ -libexecdir = @libexecdir@ -localedir = @localedir@ -localstatedir = @localstatedir@ -mandir = @mandir@ -mkdir_p = @mkdir_p@ -oldincludedir = @oldincludedir@ -pdfdir = @pdfdir@ - -# pkg-config stuff, note that libpng.pc is always required in order -# to get the correct library -pkgconfigdir = @pkgconfigdir@ -prefix = @prefix@ -program_transform_name = @program_transform_name@ -psdir = @psdir@ -sbindir = @sbindir@ -sharedstatedir = @sharedstatedir@ -srcdir = @srcdir@ -sysconfdir = @sysconfdir@ -target_alias = @target_alias@ -top_build_prefix = @top_build_prefix@ -top_builddir = @top_builddir@ -top_srcdir = @top_srcdir@ -PNGLIB_BASENAME = libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@ -ACLOCAL_AMFLAGS = -I scripts - -# This ensures that pnglibconf.h gets built at the start of 'make all' or -# 'make check', but it does not add dependencies to the individual programs, -# this is done below. -# -# IMPORTANT: always add the object modules of new programs to the list below -# because otherwise the sequence 'configure; make new-program' will *sometimes* -# result in the installed (system) pnglibconf.h being used and the result is -# always wrong and always very confusing. -BUILT_SOURCES = pnglibconf.h -pngtest_SOURCES = pngtest.c -pngtest_LDADD = libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@.la -pngvalid_SOURCES = contrib/libtests/pngvalid.c -pngvalid_LDADD = libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@.la -pngstest_SOURCES = contrib/libtests/pngstest.c -pngstest_LDADD = libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@.la -pngunknown_SOURCES = contrib/libtests/pngunknown.c -pngunknown_LDADD = libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@.la -pngimage_SOURCES = contrib/libtests/pngimage.c -pngimage_LDADD = libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@.la -timepng_SOURCES = contrib/libtests/timepng.c -timepng_LDADD = libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@.la -pngfix_SOURCES = contrib/tools/pngfix.c -pngfix_LDADD = libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@.la -png_fix_itxt_SOURCES = contrib/tools/png-fix-itxt.c -pngcp_SOURCES = contrib/tools/pngcp.c -pngcp_LDADD = libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@.la - -# Generally these are single line shell scripts to run a test with a particular -# set of parameters: -TESTS = \ - tests/pngtest-all\ - tests/pngvalid-gamma-16-to-8 tests/pngvalid-gamma-alpha-mode\ - tests/pngvalid-gamma-background tests/pngvalid-gamma-expand16-alpha-mode\ - tests/pngvalid-gamma-expand16-background\ - tests/pngvalid-gamma-expand16-transform tests/pngvalid-gamma-sbit\ - tests/pngvalid-gamma-threshold tests/pngvalid-gamma-transform\ - tests/pngvalid-progressive-size\ - tests/pngvalid-progressive-interlace-standard\ - tests/pngvalid-transform\ - tests/pngvalid-progressive-standard tests/pngvalid-standard\ - tests/pngstest-1.8 tests/pngstest-1.8-alpha tests/pngstest-linear\ - tests/pngstest-linear-alpha tests/pngstest-none tests/pngstest-none-alpha\ - tests/pngstest-sRGB tests/pngstest-sRGB-alpha tests/pngunknown-IDAT\ - tests/pngunknown-discard tests/pngunknown-if-safe tests/pngunknown-sAPI\ - tests/pngunknown-sTER tests/pngunknown-save tests/pngunknown-vpAg\ - tests/pngimage-quick tests/pngimage-full - - -# man pages -dist_man_MANS = libpng.3 libpngpf.3 png.5 -EXTRA_SCRIPTS = libpng-config libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@-config -bin_SCRIPTS = @binconfigs@ - -# rules to build libpng, only build the old library on request -lib_LTLIBRARIES = libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@.la -# EXTRA_LTLIBRARIES= libpng.la -libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@_la_SOURCES = png.c pngerror.c \ - pngget.c pngmem.c pngpread.c pngread.c pngrio.c pngrtran.c \ - pngrutil.c pngset.c pngtrans.c pngwio.c pngwrite.c pngwtran.c \ - pngwutil.c png.h pngconf.h pngdebug.h pnginfo.h pngpriv.h \ - pngstruct.h pngusr.dfa $(am__append_2) $(am__append_3) \ - $(am__append_4) $(am__append_5) -nodist_libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@_la_SOURCES = pnglibconf.h -libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@_la_LDFLAGS = -no-undefined \ - -export-dynamic -version-number \ - @PNGLIB_MAJOR@@PNGLIB_MINOR@:@PNGLIB_RELEASE@:0 \ - $(am__append_6) $(am__append_7) $(am__append_8) -@HAVE_LD_VERSION_SCRIPT_FALSE@libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@_la_DEPENDENCIES = libpng.sym -@HAVE_LD_VERSION_SCRIPT_TRUE@libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@_la_DEPENDENCIES = libpng.vers -pkginclude_HEADERS = png.h pngconf.h -nodist_pkginclude_HEADERS = pnglibconf.h -pkgconfig_DATA = libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@.pc - -# Extra source distribution files, '${srcdir}' is used below to stop build files -# from those directories being included. This only works if the configure is -# not done in the source directory! -EXTRA_DIST = \ - ANNOUNCE AUTHORS CHANGES INSTALL LICENSE README TODO TRADEMARK \ - pngtest.png pngbar.png pngnow.png pngbar.jpg autogen.sh \ - ${srcdir}/contrib ${srcdir}/projects ${srcdir}/scripts \ - $(TESTS) $(XFAIL_TESTS) tests/pngstest \ - CMakeLists.txt example.c libpng-manual.txt - -SCRIPT_CLEANFILES = scripts/*.out scripts/*.chk -CLEANFILES = *.tf? pngout.png libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@.pc \ - libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@-config libpng.vers libpng.sym \ - check.new pnglibconf.h pngprefix.h symbols.new pngtest-log.txt \ - pnglibconf.out pnglibconf.c pnglibconf.pre pnglibconf.dfn \ - $(SCRIPT_CLEANFILES) - -MAINTAINERCLEANFILES = Makefile.in aclocal.m4 config.guess config.h.in \ -config.sub configure depcomp install-sh ltmain.sh missing - -AM_CFLAGS = ${PNG_COPTS} -SUFFIXES = .chk .out - -# We must use -DPNG_NO_USE_READ_MACROS here even when the library may actually -# be built with PNG_USE_READ_MACROS; this prevents the read macros from -# interfering with the symbol file format. -SYMBOL_CFLAGS = -DPNGLIB_LIBNAME='PNG@PNGLIB_MAJOR@@PNGLIB_MINOR@_0' \ - -DPNGLIB_VERSION='@PNGLIB_VERSION@' \ - -DSYMBOL_PREFIX='$(SYMBOL_PREFIX)' -DPNG_NO_USE_READ_MACROS \ - -DPNG_BUILDING_SYMBOL_TABLE $(am__append_9) - -# EXT_LIST is a list of the possibly library directory extensions, this exists -# because we can't find a good way of discovering the file extensions that are -# actually installed on a given system, so instead we check for every extension -# we have seen. -EXT_LIST = a dll.a so so.@PNGLIB_MAJOR@@PNGLIB_MINOR@.@PNGLIB_RELEASE@ la sl dylib -all: $(BUILT_SOURCES) config.h - $(MAKE) $(AM_MAKEFLAGS) all-am - -.SUFFIXES: -.SUFFIXES: .chk .out .S .c .lo .log .o .obj .test .test$(EXEEXT) .trs -am--refresh: Makefile - @: -$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps) - @for dep in $?; do \ - case '$(am__configure_deps)' in \ - *$$dep*) \ - echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \ - $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \ - && exit 0; \ - exit 1;; \ - esac; \ - done; \ - echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \ - $(am__cd) $(top_srcdir) && \ - $(AUTOMAKE) --foreign Makefile -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - @case '$?' in \ - *config.status*) \ - echo ' $(SHELL) ./config.status'; \ - $(SHELL) ./config.status;; \ - *) \ - echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__maybe_remake_depfiles)'; \ - cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__maybe_remake_depfiles);; \ - esac; - -$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) - $(SHELL) ./config.status --recheck - -$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) - $(am__cd) $(srcdir) && $(AUTOCONF) -$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) - $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) -$(am__aclocal_m4_deps): - -config.h: stamp-h1 - @test -f $@ || rm -f stamp-h1 - @test -f $@ || $(MAKE) $(AM_MAKEFLAGS) stamp-h1 - -stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status - @rm -f stamp-h1 - cd $(top_builddir) && $(SHELL) ./config.status config.h -$(srcdir)/config.h.in: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) - ($(am__cd) $(top_srcdir) && $(AUTOHEADER)) - rm -f stamp-h1 - touch $@ - -distclean-hdr: - -rm -f config.h stamp-h1 -libpng.pc: $(top_builddir)/config.status $(srcdir)/libpng.pc.in - cd $(top_builddir) && $(SHELL) ./config.status $@ -libpng-config: $(top_builddir)/config.status $(srcdir)/libpng-config.in - cd $(top_builddir) && $(SHELL) ./config.status $@ -install-binPROGRAMS: $(bin_PROGRAMS) - @$(NORMAL_INSTALL) - @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \ - if test -n "$$list"; then \ - echo " $(MKDIR_P) '$(DESTDIR)$(bindir)'"; \ - $(MKDIR_P) "$(DESTDIR)$(bindir)" || exit 1; \ - fi; \ - for p in $$list; do echo "$$p $$p"; done | \ - sed 's/$(EXEEXT)$$//' | \ - while read p p1; do if test -f $$p \ - || test -f $$p1 \ - ; then echo "$$p"; echo "$$p"; else :; fi; \ - done | \ - sed -e 'p;s,.*/,,;n;h' \ - -e 's|.*|.|' \ - -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \ - sed 'N;N;N;s,\n, ,g' | \ - $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \ - { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \ - if ($$2 == $$4) files[d] = files[d] " " $$1; \ - else { print "f", $$3 "/" $$4, $$1; } } \ - END { for (d in files) print "f", d, files[d] }' | \ - while read type dir files; do \ - if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \ - test -z "$$files" || { \ - echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(bindir)$$dir'"; \ - $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \ - } \ - ; done - -uninstall-binPROGRAMS: - @$(NORMAL_UNINSTALL) - @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \ - files=`for p in $$list; do echo "$$p"; done | \ - sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \ - -e 's/$$/$(EXEEXT)/' \ - `; \ - test -n "$$list" || exit 0; \ - echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \ - cd "$(DESTDIR)$(bindir)" && rm -f $$files - -clean-binPROGRAMS: - @list='$(bin_PROGRAMS)'; test -n "$$list" || exit 0; \ - echo " rm -f" $$list; \ - rm -f $$list || exit $$?; \ - test -n "$(EXEEXT)" || exit 0; \ - list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \ - echo " rm -f" $$list; \ - rm -f $$list - -clean-checkPROGRAMS: - @list='$(check_PROGRAMS)'; test -n "$$list" || exit 0; \ - echo " rm -f" $$list; \ - rm -f $$list || exit $$?; \ - test -n "$(EXEEXT)" || exit 0; \ - list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \ - echo " rm -f" $$list; \ - rm -f $$list - -install-libLTLIBRARIES: $(lib_LTLIBRARIES) - @$(NORMAL_INSTALL) - @list='$(lib_LTLIBRARIES)'; test -n "$(libdir)" || list=; \ - list2=; for p in $$list; do \ - if test -f $$p; then \ - list2="$$list2 $$p"; \ - else :; fi; \ - done; \ - test -z "$$list2" || { \ - echo " $(MKDIR_P) '$(DESTDIR)$(libdir)'"; \ - $(MKDIR_P) "$(DESTDIR)$(libdir)" || exit 1; \ - echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 '$(DESTDIR)$(libdir)'"; \ - $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 "$(DESTDIR)$(libdir)"; \ - } - -uninstall-libLTLIBRARIES: - @$(NORMAL_UNINSTALL) - @list='$(lib_LTLIBRARIES)'; test -n "$(libdir)" || list=; \ - for p in $$list; do \ - $(am__strip_dir) \ - echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f '$(DESTDIR)$(libdir)/$$f'"; \ - $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f "$(DESTDIR)$(libdir)/$$f"; \ - done - -clean-libLTLIBRARIES: - -test -z "$(lib_LTLIBRARIES)" || rm -f $(lib_LTLIBRARIES) - @list='$(lib_LTLIBRARIES)'; \ - locs=`for p in $$list; do echo $$p; done | \ - sed 's|^[^/]*$$|.|; s|/[^/]*$$||; s|$$|/so_locations|' | \ - sort -u`; \ - test -z "$$locs" || { \ - echo rm -f $${locs}; \ - rm -f $${locs}; \ - } -arm/$(am__dirstamp): - @$(MKDIR_P) arm - @: > arm/$(am__dirstamp) -arm/$(DEPDIR)/$(am__dirstamp): - @$(MKDIR_P) arm/$(DEPDIR) - @: > arm/$(DEPDIR)/$(am__dirstamp) -arm/arm_init.lo: arm/$(am__dirstamp) arm/$(DEPDIR)/$(am__dirstamp) -arm/filter_neon.lo: arm/$(am__dirstamp) arm/$(DEPDIR)/$(am__dirstamp) -arm/filter_neon_intrinsics.lo: arm/$(am__dirstamp) \ - arm/$(DEPDIR)/$(am__dirstamp) -arm/palette_neon_intrinsics.lo: arm/$(am__dirstamp) \ - arm/$(DEPDIR)/$(am__dirstamp) -mips/$(am__dirstamp): - @$(MKDIR_P) mips - @: > mips/$(am__dirstamp) -mips/$(DEPDIR)/$(am__dirstamp): - @$(MKDIR_P) mips/$(DEPDIR) - @: > mips/$(DEPDIR)/$(am__dirstamp) -mips/mips_init.lo: mips/$(am__dirstamp) mips/$(DEPDIR)/$(am__dirstamp) -mips/filter_msa_intrinsics.lo: mips/$(am__dirstamp) \ - mips/$(DEPDIR)/$(am__dirstamp) -intel/$(am__dirstamp): - @$(MKDIR_P) intel - @: > intel/$(am__dirstamp) -intel/$(DEPDIR)/$(am__dirstamp): - @$(MKDIR_P) intel/$(DEPDIR) - @: > intel/$(DEPDIR)/$(am__dirstamp) -intel/intel_init.lo: intel/$(am__dirstamp) \ - intel/$(DEPDIR)/$(am__dirstamp) -intel/filter_sse2_intrinsics.lo: intel/$(am__dirstamp) \ - intel/$(DEPDIR)/$(am__dirstamp) -powerpc/$(am__dirstamp): - @$(MKDIR_P) powerpc - @: > powerpc/$(am__dirstamp) -powerpc/$(DEPDIR)/$(am__dirstamp): - @$(MKDIR_P) powerpc/$(DEPDIR) - @: > powerpc/$(DEPDIR)/$(am__dirstamp) -powerpc/powerpc_init.lo: powerpc/$(am__dirstamp) \ - powerpc/$(DEPDIR)/$(am__dirstamp) -powerpc/filter_vsx_intrinsics.lo: powerpc/$(am__dirstamp) \ - powerpc/$(DEPDIR)/$(am__dirstamp) - -libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@.la: $(libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@_la_OBJECTS) $(libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@_la_DEPENDENCIES) $(EXTRA_libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@_la_DEPENDENCIES) - $(AM_V_CCLD)$(libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@_la_LINK) -rpath $(libdir) $(libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@_la_OBJECTS) $(libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@_la_LIBADD) $(LIBS) -contrib/tools/$(am__dirstamp): - @$(MKDIR_P) contrib/tools - @: > contrib/tools/$(am__dirstamp) -contrib/tools/$(DEPDIR)/$(am__dirstamp): - @$(MKDIR_P) contrib/tools/$(DEPDIR) - @: > contrib/tools/$(DEPDIR)/$(am__dirstamp) -contrib/tools/png-fix-itxt.$(OBJEXT): contrib/tools/$(am__dirstamp) \ - contrib/tools/$(DEPDIR)/$(am__dirstamp) - -png-fix-itxt$(EXEEXT): $(png_fix_itxt_OBJECTS) $(png_fix_itxt_DEPENDENCIES) $(EXTRA_png_fix_itxt_DEPENDENCIES) - @rm -f png-fix-itxt$(EXEEXT) - $(AM_V_CCLD)$(LINK) $(png_fix_itxt_OBJECTS) $(png_fix_itxt_LDADD) $(LIBS) -contrib/tools/pngcp.$(OBJEXT): contrib/tools/$(am__dirstamp) \ - contrib/tools/$(DEPDIR)/$(am__dirstamp) - -pngcp$(EXEEXT): $(pngcp_OBJECTS) $(pngcp_DEPENDENCIES) $(EXTRA_pngcp_DEPENDENCIES) - @rm -f pngcp$(EXEEXT) - $(AM_V_CCLD)$(LINK) $(pngcp_OBJECTS) $(pngcp_LDADD) $(LIBS) -contrib/tools/pngfix.$(OBJEXT): contrib/tools/$(am__dirstamp) \ - contrib/tools/$(DEPDIR)/$(am__dirstamp) - -pngfix$(EXEEXT): $(pngfix_OBJECTS) $(pngfix_DEPENDENCIES) $(EXTRA_pngfix_DEPENDENCIES) - @rm -f pngfix$(EXEEXT) - $(AM_V_CCLD)$(LINK) $(pngfix_OBJECTS) $(pngfix_LDADD) $(LIBS) -contrib/libtests/$(am__dirstamp): - @$(MKDIR_P) contrib/libtests - @: > contrib/libtests/$(am__dirstamp) -contrib/libtests/$(DEPDIR)/$(am__dirstamp): - @$(MKDIR_P) contrib/libtests/$(DEPDIR) - @: > contrib/libtests/$(DEPDIR)/$(am__dirstamp) -contrib/libtests/pngimage.$(OBJEXT): contrib/libtests/$(am__dirstamp) \ - contrib/libtests/$(DEPDIR)/$(am__dirstamp) - -pngimage$(EXEEXT): $(pngimage_OBJECTS) $(pngimage_DEPENDENCIES) $(EXTRA_pngimage_DEPENDENCIES) - @rm -f pngimage$(EXEEXT) - $(AM_V_CCLD)$(LINK) $(pngimage_OBJECTS) $(pngimage_LDADD) $(LIBS) -contrib/libtests/pngstest.$(OBJEXT): contrib/libtests/$(am__dirstamp) \ - contrib/libtests/$(DEPDIR)/$(am__dirstamp) - -pngstest$(EXEEXT): $(pngstest_OBJECTS) $(pngstest_DEPENDENCIES) $(EXTRA_pngstest_DEPENDENCIES) - @rm -f pngstest$(EXEEXT) - $(AM_V_CCLD)$(LINK) $(pngstest_OBJECTS) $(pngstest_LDADD) $(LIBS) - -pngtest$(EXEEXT): $(pngtest_OBJECTS) $(pngtest_DEPENDENCIES) $(EXTRA_pngtest_DEPENDENCIES) - @rm -f pngtest$(EXEEXT) - $(AM_V_CCLD)$(LINK) $(pngtest_OBJECTS) $(pngtest_LDADD) $(LIBS) -contrib/libtests/pngunknown.$(OBJEXT): \ - contrib/libtests/$(am__dirstamp) \ - contrib/libtests/$(DEPDIR)/$(am__dirstamp) - -pngunknown$(EXEEXT): $(pngunknown_OBJECTS) $(pngunknown_DEPENDENCIES) $(EXTRA_pngunknown_DEPENDENCIES) - @rm -f pngunknown$(EXEEXT) - $(AM_V_CCLD)$(LINK) $(pngunknown_OBJECTS) $(pngunknown_LDADD) $(LIBS) -contrib/libtests/pngvalid.$(OBJEXT): contrib/libtests/$(am__dirstamp) \ - contrib/libtests/$(DEPDIR)/$(am__dirstamp) - -pngvalid$(EXEEXT): $(pngvalid_OBJECTS) $(pngvalid_DEPENDENCIES) $(EXTRA_pngvalid_DEPENDENCIES) - @rm -f pngvalid$(EXEEXT) - $(AM_V_CCLD)$(LINK) $(pngvalid_OBJECTS) $(pngvalid_LDADD) $(LIBS) -contrib/libtests/timepng.$(OBJEXT): contrib/libtests/$(am__dirstamp) \ - contrib/libtests/$(DEPDIR)/$(am__dirstamp) - -timepng$(EXEEXT): $(timepng_OBJECTS) $(timepng_DEPENDENCIES) $(EXTRA_timepng_DEPENDENCIES) - @rm -f timepng$(EXEEXT) - $(AM_V_CCLD)$(LINK) $(timepng_OBJECTS) $(timepng_LDADD) $(LIBS) -install-binSCRIPTS: $(bin_SCRIPTS) - @$(NORMAL_INSTALL) - @list='$(bin_SCRIPTS)'; test -n "$(bindir)" || list=; \ - if test -n "$$list"; then \ - echo " $(MKDIR_P) '$(DESTDIR)$(bindir)'"; \ - $(MKDIR_P) "$(DESTDIR)$(bindir)" || exit 1; \ - fi; \ - for p in $$list; do \ - if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ - if test -f "$$d$$p"; then echo "$$d$$p"; echo "$$p"; else :; fi; \ - done | \ - sed -e 'p;s,.*/,,;n' \ - -e 'h;s|.*|.|' \ - -e 'p;x;s,.*/,,;$(transform)' | sed 'N;N;N;s,\n, ,g' | \ - $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1; } \ - { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \ - if ($$2 == $$4) { files[d] = files[d] " " $$1; \ - if (++n[d] == $(am__install_max)) { \ - print "f", d, files[d]; n[d] = 0; files[d] = "" } } \ - else { print "f", d "/" $$4, $$1 } } \ - END { for (d in files) print "f", d, files[d] }' | \ - while read type dir files; do \ - if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \ - test -z "$$files" || { \ - echo " $(INSTALL_SCRIPT) $$files '$(DESTDIR)$(bindir)$$dir'"; \ - $(INSTALL_SCRIPT) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \ - } \ - ; done - -uninstall-binSCRIPTS: - @$(NORMAL_UNINSTALL) - @list='$(bin_SCRIPTS)'; test -n "$(bindir)" || exit 0; \ - files=`for p in $$list; do echo "$$p"; done | \ - sed -e 's,.*/,,;$(transform)'`; \ - dir='$(DESTDIR)$(bindir)'; $(am__uninstall_files_from_dir) - -mostlyclean-compile: - -rm -f *.$(OBJEXT) - -rm -f arm/*.$(OBJEXT) - -rm -f arm/*.lo - -rm -f contrib/libtests/*.$(OBJEXT) - -rm -f contrib/tools/*.$(OBJEXT) - -rm -f intel/*.$(OBJEXT) - -rm -f intel/*.lo - -rm -f mips/*.$(OBJEXT) - -rm -f mips/*.lo - -rm -f powerpc/*.$(OBJEXT) - -rm -f powerpc/*.lo - -distclean-compile: - -rm -f *.tab.c - -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/png.Plo@am__quote@ # am--include-marker -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pngerror.Plo@am__quote@ # am--include-marker -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pngget.Plo@am__quote@ # am--include-marker -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pngmem.Plo@am__quote@ # am--include-marker -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pngpread.Plo@am__quote@ # am--include-marker -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pngread.Plo@am__quote@ # am--include-marker -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pngrio.Plo@am__quote@ # am--include-marker -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pngrtran.Plo@am__quote@ # am--include-marker -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pngrutil.Plo@am__quote@ # am--include-marker -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pngset.Plo@am__quote@ # am--include-marker -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pngtest.Po@am__quote@ # am--include-marker -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pngtrans.Plo@am__quote@ # am--include-marker -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pngwio.Plo@am__quote@ # am--include-marker -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pngwrite.Plo@am__quote@ # am--include-marker -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pngwtran.Plo@am__quote@ # am--include-marker -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pngwutil.Plo@am__quote@ # am--include-marker -@AMDEP_TRUE@@am__include@ @am__quote@arm/$(DEPDIR)/arm_init.Plo@am__quote@ # am--include-marker -@AMDEP_TRUE@@am__include@ @am__quote@arm/$(DEPDIR)/filter_neon.Plo@am__quote@ # am--include-marker -@AMDEP_TRUE@@am__include@ @am__quote@arm/$(DEPDIR)/filter_neon_intrinsics.Plo@am__quote@ # am--include-marker -@AMDEP_TRUE@@am__include@ @am__quote@arm/$(DEPDIR)/palette_neon_intrinsics.Plo@am__quote@ # am--include-marker -@AMDEP_TRUE@@am__include@ @am__quote@contrib/libtests/$(DEPDIR)/pngimage.Po@am__quote@ # am--include-marker -@AMDEP_TRUE@@am__include@ @am__quote@contrib/libtests/$(DEPDIR)/pngstest.Po@am__quote@ # am--include-marker -@AMDEP_TRUE@@am__include@ @am__quote@contrib/libtests/$(DEPDIR)/pngunknown.Po@am__quote@ # am--include-marker -@AMDEP_TRUE@@am__include@ @am__quote@contrib/libtests/$(DEPDIR)/pngvalid.Po@am__quote@ # am--include-marker -@AMDEP_TRUE@@am__include@ @am__quote@contrib/libtests/$(DEPDIR)/timepng.Po@am__quote@ # am--include-marker -@AMDEP_TRUE@@am__include@ @am__quote@contrib/tools/$(DEPDIR)/png-fix-itxt.Po@am__quote@ # am--include-marker -@AMDEP_TRUE@@am__include@ @am__quote@contrib/tools/$(DEPDIR)/pngcp.Po@am__quote@ # am--include-marker -@AMDEP_TRUE@@am__include@ @am__quote@contrib/tools/$(DEPDIR)/pngfix.Po@am__quote@ # am--include-marker -@AMDEP_TRUE@@am__include@ @am__quote@intel/$(DEPDIR)/filter_sse2_intrinsics.Plo@am__quote@ # am--include-marker -@AMDEP_TRUE@@am__include@ @am__quote@intel/$(DEPDIR)/intel_init.Plo@am__quote@ # am--include-marker -@AMDEP_TRUE@@am__include@ @am__quote@mips/$(DEPDIR)/filter_msa_intrinsics.Plo@am__quote@ # am--include-marker -@AMDEP_TRUE@@am__include@ @am__quote@mips/$(DEPDIR)/mips_init.Plo@am__quote@ # am--include-marker -@AMDEP_TRUE@@am__include@ @am__quote@powerpc/$(DEPDIR)/filter_vsx_intrinsics.Plo@am__quote@ # am--include-marker -@AMDEP_TRUE@@am__include@ @am__quote@powerpc/$(DEPDIR)/powerpc_init.Plo@am__quote@ # am--include-marker - -$(am__depfiles_remade): - @$(MKDIR_P) $(@D) - @echo '# dummy' >$@-t && $(am__mv) $@-t $@ - -am--depfiles: $(am__depfiles_remade) - -.S.o: -@am__fastdepCCAS_TRUE@ $(AM_V_CPPAS)depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.o$$||'`;\ -@am__fastdepCCAS_TRUE@ $(CPPASCOMPILE) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ $< &&\ -@am__fastdepCCAS_TRUE@ $(am__mv) $$depbase.Tpo $$depbase.Po -@AMDEP_TRUE@@am__fastdepCCAS_FALSE@ $(AM_V_CPPAS)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCCAS_FALSE@ DEPDIR=$(DEPDIR) $(CCASDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCCAS_FALSE@ $(AM_V_CPPAS@am__nodep@)$(CPPASCOMPILE) -c -o $@ $< - -.S.obj: -@am__fastdepCCAS_TRUE@ $(AM_V_CPPAS)depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.obj$$||'`;\ -@am__fastdepCCAS_TRUE@ $(CPPASCOMPILE) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ `$(CYGPATH_W) '$<'` &&\ -@am__fastdepCCAS_TRUE@ $(am__mv) $$depbase.Tpo $$depbase.Po -@AMDEP_TRUE@@am__fastdepCCAS_FALSE@ $(AM_V_CPPAS)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCCAS_FALSE@ DEPDIR=$(DEPDIR) $(CCASDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCCAS_FALSE@ $(AM_V_CPPAS@am__nodep@)$(CPPASCOMPILE) -c -o $@ `$(CYGPATH_W) '$<'` - -.S.lo: -@am__fastdepCCAS_TRUE@ $(AM_V_CPPAS)depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.lo$$||'`;\ -@am__fastdepCCAS_TRUE@ $(LTCPPASCOMPILE) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ $< &&\ -@am__fastdepCCAS_TRUE@ $(am__mv) $$depbase.Tpo $$depbase.Plo -@AMDEP_TRUE@@am__fastdepCCAS_FALSE@ $(AM_V_CPPAS)source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCCAS_FALSE@ DEPDIR=$(DEPDIR) $(CCASDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCCAS_FALSE@ $(AM_V_CPPAS@am__nodep@)$(LTCPPASCOMPILE) -c -o $@ $< - -.c.o: -@am__fastdepCC_TRUE@ $(AM_V_CC)depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.o$$||'`;\ -@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ $< &&\ -@am__fastdepCC_TRUE@ $(am__mv) $$depbase.Tpo $$depbase.Po -@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ $< - -.c.obj: -@am__fastdepCC_TRUE@ $(AM_V_CC)depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.obj$$||'`;\ -@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ `$(CYGPATH_W) '$<'` &&\ -@am__fastdepCC_TRUE@ $(am__mv) $$depbase.Tpo $$depbase.Po -@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'` - -.c.lo: -@am__fastdepCC_TRUE@ $(AM_V_CC)depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.lo$$||'`;\ -@am__fastdepCC_TRUE@ $(LTCOMPILE) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ $< &&\ -@am__fastdepCC_TRUE@ $(am__mv) $$depbase.Tpo $$depbase.Plo -@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(LTCOMPILE) -c -o $@ $< - -mostlyclean-libtool: - -rm -f *.lo - -clean-libtool: - -rm -rf .libs _libs - -rm -rf arm/.libs arm/_libs - -rm -rf intel/.libs intel/_libs - -rm -rf mips/.libs mips/_libs - -rm -rf powerpc/.libs powerpc/_libs - -distclean-libtool: - -rm -f libtool config.lt -install-man3: $(dist_man_MANS) - @$(NORMAL_INSTALL) - @list1=''; \ - list2='$(dist_man_MANS)'; \ - test -n "$(man3dir)" \ - && test -n "`echo $$list1$$list2`" \ - || exit 0; \ - echo " $(MKDIR_P) '$(DESTDIR)$(man3dir)'"; \ - $(MKDIR_P) "$(DESTDIR)$(man3dir)" || exit 1; \ - { for i in $$list1; do echo "$$i"; done; \ - if test -n "$$list2"; then \ - for i in $$list2; do echo "$$i"; done \ - | sed -n '/\.3[a-z]*$$/p'; \ - fi; \ - } | while read p; do \ - if test -f $$p; then d=; else d="$(srcdir)/"; fi; \ - echo "$$d$$p"; echo "$$p"; \ - done | \ - sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^3][0-9a-z]*$$,3,;x' \ - -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \ - sed 'N;N;s,\n, ,g' | { \ - list=; while read file base inst; do \ - if test "$$base" = "$$inst"; then list="$$list $$file"; else \ - echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man3dir)/$$inst'"; \ - $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man3dir)/$$inst" || exit $$?; \ - fi; \ - done; \ - for i in $$list; do echo "$$i"; done | $(am__base_list) | \ - while read files; do \ - test -z "$$files" || { \ - echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man3dir)'"; \ - $(INSTALL_DATA) $$files "$(DESTDIR)$(man3dir)" || exit $$?; }; \ - done; } - -uninstall-man3: - @$(NORMAL_UNINSTALL) - @list=''; test -n "$(man3dir)" || exit 0; \ - files=`{ for i in $$list; do echo "$$i"; done; \ - l2='$(dist_man_MANS)'; for i in $$l2; do echo "$$i"; done | \ - sed -n '/\.3[a-z]*$$/p'; \ - } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^3][0-9a-z]*$$,3,;x' \ - -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \ - dir='$(DESTDIR)$(man3dir)'; $(am__uninstall_files_from_dir) -install-man5: $(dist_man_MANS) - @$(NORMAL_INSTALL) - @list1=''; \ - list2='$(dist_man_MANS)'; \ - test -n "$(man5dir)" \ - && test -n "`echo $$list1$$list2`" \ - || exit 0; \ - echo " $(MKDIR_P) '$(DESTDIR)$(man5dir)'"; \ - $(MKDIR_P) "$(DESTDIR)$(man5dir)" || exit 1; \ - { for i in $$list1; do echo "$$i"; done; \ - if test -n "$$list2"; then \ - for i in $$list2; do echo "$$i"; done \ - | sed -n '/\.5[a-z]*$$/p'; \ - fi; \ - } | while read p; do \ - if test -f $$p; then d=; else d="$(srcdir)/"; fi; \ - echo "$$d$$p"; echo "$$p"; \ - done | \ - sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^5][0-9a-z]*$$,5,;x' \ - -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \ - sed 'N;N;s,\n, ,g' | { \ - list=; while read file base inst; do \ - if test "$$base" = "$$inst"; then list="$$list $$file"; else \ - echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man5dir)/$$inst'"; \ - $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man5dir)/$$inst" || exit $$?; \ - fi; \ - done; \ - for i in $$list; do echo "$$i"; done | $(am__base_list) | \ - while read files; do \ - test -z "$$files" || { \ - echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man5dir)'"; \ - $(INSTALL_DATA) $$files "$(DESTDIR)$(man5dir)" || exit $$?; }; \ - done; } - -uninstall-man5: - @$(NORMAL_UNINSTALL) - @list=''; test -n "$(man5dir)" || exit 0; \ - files=`{ for i in $$list; do echo "$$i"; done; \ - l2='$(dist_man_MANS)'; for i in $$l2; do echo "$$i"; done | \ - sed -n '/\.5[a-z]*$$/p'; \ - } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^5][0-9a-z]*$$,5,;x' \ - -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \ - dir='$(DESTDIR)$(man5dir)'; $(am__uninstall_files_from_dir) -install-pkgconfigDATA: $(pkgconfig_DATA) - @$(NORMAL_INSTALL) - @list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \ - if test -n "$$list"; then \ - echo " $(MKDIR_P) '$(DESTDIR)$(pkgconfigdir)'"; \ - $(MKDIR_P) "$(DESTDIR)$(pkgconfigdir)" || exit 1; \ - fi; \ - for p in $$list; do \ - if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ - echo "$$d$$p"; \ - done | $(am__base_list) | \ - while read files; do \ - echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pkgconfigdir)'"; \ - $(INSTALL_DATA) $$files "$(DESTDIR)$(pkgconfigdir)" || exit $$?; \ - done - -uninstall-pkgconfigDATA: - @$(NORMAL_UNINSTALL) - @list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \ - files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ - dir='$(DESTDIR)$(pkgconfigdir)'; $(am__uninstall_files_from_dir) -install-nodist_pkgincludeHEADERS: $(nodist_pkginclude_HEADERS) - @$(NORMAL_INSTALL) - @list='$(nodist_pkginclude_HEADERS)'; test -n "$(pkgincludedir)" || list=; \ - if test -n "$$list"; then \ - echo " $(MKDIR_P) '$(DESTDIR)$(pkgincludedir)'"; \ - $(MKDIR_P) "$(DESTDIR)$(pkgincludedir)" || exit 1; \ - fi; \ - for p in $$list; do \ - if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ - echo "$$d$$p"; \ - done | $(am__base_list) | \ - while read files; do \ - echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(pkgincludedir)'"; \ - $(INSTALL_HEADER) $$files "$(DESTDIR)$(pkgincludedir)" || exit $$?; \ - done - -uninstall-nodist_pkgincludeHEADERS: - @$(NORMAL_UNINSTALL) - @list='$(nodist_pkginclude_HEADERS)'; test -n "$(pkgincludedir)" || list=; \ - files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ - dir='$(DESTDIR)$(pkgincludedir)'; $(am__uninstall_files_from_dir) -install-pkgincludeHEADERS: $(pkginclude_HEADERS) - @$(NORMAL_INSTALL) - @list='$(pkginclude_HEADERS)'; test -n "$(pkgincludedir)" || list=; \ - if test -n "$$list"; then \ - echo " $(MKDIR_P) '$(DESTDIR)$(pkgincludedir)'"; \ - $(MKDIR_P) "$(DESTDIR)$(pkgincludedir)" || exit 1; \ - fi; \ - for p in $$list; do \ - if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ - echo "$$d$$p"; \ - done | $(am__base_list) | \ - while read files; do \ - echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(pkgincludedir)'"; \ - $(INSTALL_HEADER) $$files "$(DESTDIR)$(pkgincludedir)" || exit $$?; \ - done - -uninstall-pkgincludeHEADERS: - @$(NORMAL_UNINSTALL) - @list='$(pkginclude_HEADERS)'; test -n "$(pkgincludedir)" || list=; \ - files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ - dir='$(DESTDIR)$(pkgincludedir)'; $(am__uninstall_files_from_dir) - -ID: $(am__tagged_files) - $(am__define_uniq_tagged_files); mkid -fID $$unique -tags: tags-am -TAGS: tags - -tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) - set x; \ - here=`pwd`; \ - $(am__define_uniq_tagged_files); \ - shift; \ - if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ - test -n "$$unique" || unique=$$empty_fix; \ - if test $$# -gt 0; then \ - $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ - "$$@" $$unique; \ - else \ - $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ - $$unique; \ - fi; \ - fi -ctags: ctags-am - -CTAGS: ctags -ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) - $(am__define_uniq_tagged_files); \ - test -z "$(CTAGS_ARGS)$$unique" \ - || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ - $$unique - -GTAGS: - here=`$(am__cd) $(top_builddir) && pwd` \ - && $(am__cd) $(top_srcdir) \ - && gtags -i $(GTAGS_ARGS) "$$here" -cscope: cscope.files - test ! -s cscope.files \ - || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS) -clean-cscope: - -rm -f cscope.files -cscope.files: clean-cscope cscopelist -cscopelist: cscopelist-am - -cscopelist-am: $(am__tagged_files) - list='$(am__tagged_files)'; \ - case "$(srcdir)" in \ - [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \ - *) sdir=$(subdir)/$(srcdir) ;; \ - esac; \ - for i in $$list; do \ - if test -f "$$i"; then \ - echo "$(subdir)/$$i"; \ - else \ - echo "$$sdir/$$i"; \ - fi; \ - done >> $(top_builddir)/cscope.files - -distclean-tags: - -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags - -rm -f cscope.out cscope.in.out cscope.po.out cscope.files - -# Recover from deleted '.trs' file; this should ensure that -# "rm -f foo.log; make foo.trs" re-run 'foo.test', and re-create -# both 'foo.log' and 'foo.trs'. Break the recipe in two subshells -# to avoid problems with "make -n". -.log.trs: - rm -f $< $@ - $(MAKE) $(AM_MAKEFLAGS) $< - -# Leading 'am--fnord' is there to ensure the list of targets does not -# expand to empty, as could happen e.g. with make check TESTS=''. -am--fnord $(TEST_LOGS) $(TEST_LOGS:.log=.trs): $(am__force_recheck) -am--force-recheck: - @: - -$(TEST_SUITE_LOG): $(TEST_LOGS) - @$(am__set_TESTS_bases); \ - am__f_ok () { test -f "$$1" && test -r "$$1"; }; \ - redo_bases=`for i in $$bases; do \ - am__f_ok $$i.trs && am__f_ok $$i.log || echo $$i; \ - done`; \ - if test -n "$$redo_bases"; then \ - redo_logs=`for i in $$redo_bases; do echo $$i.log; done`; \ - redo_results=`for i in $$redo_bases; do echo $$i.trs; done`; \ - if $(am__make_dryrun); then :; else \ - rm -f $$redo_logs && rm -f $$redo_results || exit 1; \ - fi; \ - fi; \ - if test -n "$$am__remaking_logs"; then \ - echo "fatal: making $(TEST_SUITE_LOG): possible infinite" \ - "recursion detected" >&2; \ - elif test -n "$$redo_logs"; then \ - am__remaking_logs=yes $(MAKE) $(AM_MAKEFLAGS) $$redo_logs; \ - fi; \ - if $(am__make_dryrun); then :; else \ - st=0; \ - errmsg="fatal: making $(TEST_SUITE_LOG): failed to create"; \ - for i in $$redo_bases; do \ - test -f $$i.trs && test -r $$i.trs \ - || { echo "$$errmsg $$i.trs" >&2; st=1; }; \ - test -f $$i.log && test -r $$i.log \ - || { echo "$$errmsg $$i.log" >&2; st=1; }; \ - done; \ - test $$st -eq 0 || exit 1; \ - fi - @$(am__sh_e_setup); $(am__tty_colors); $(am__set_TESTS_bases); \ - ws='[ ]'; \ - results=`for b in $$bases; do echo $$b.trs; done`; \ - test -n "$$results" || results=/dev/null; \ - all=` grep "^$$ws*:test-result:" $$results | wc -l`; \ - pass=` grep "^$$ws*:test-result:$$ws*PASS" $$results | wc -l`; \ - fail=` grep "^$$ws*:test-result:$$ws*FAIL" $$results | wc -l`; \ - skip=` grep "^$$ws*:test-result:$$ws*SKIP" $$results | wc -l`; \ - xfail=`grep "^$$ws*:test-result:$$ws*XFAIL" $$results | wc -l`; \ - xpass=`grep "^$$ws*:test-result:$$ws*XPASS" $$results | wc -l`; \ - error=`grep "^$$ws*:test-result:$$ws*ERROR" $$results | wc -l`; \ - if test `expr $$fail + $$xpass + $$error` -eq 0; then \ - success=true; \ - else \ - success=false; \ - fi; \ - br='==================='; br=$$br$$br$$br$$br; \ - result_count () \ - { \ - if test x"$$1" = x"--maybe-color"; then \ - maybe_colorize=yes; \ - elif test x"$$1" = x"--no-color"; then \ - maybe_colorize=no; \ - else \ - echo "$@: invalid 'result_count' usage" >&2; exit 4; \ - fi; \ - shift; \ - desc=$$1 count=$$2; \ - if test $$maybe_colorize = yes && test $$count -gt 0; then \ - color_start=$$3 color_end=$$std; \ - else \ - color_start= color_end=; \ - fi; \ - echo "$${color_start}# $$desc $$count$${color_end}"; \ - }; \ - create_testsuite_report () \ - { \ - result_count $$1 "TOTAL:" $$all "$$brg"; \ - result_count $$1 "PASS: " $$pass "$$grn"; \ - result_count $$1 "SKIP: " $$skip "$$blu"; \ - result_count $$1 "XFAIL:" $$xfail "$$lgn"; \ - result_count $$1 "FAIL: " $$fail "$$red"; \ - result_count $$1 "XPASS:" $$xpass "$$red"; \ - result_count $$1 "ERROR:" $$error "$$mgn"; \ - }; \ - { \ - echo "$(PACKAGE_STRING): $(subdir)/$(TEST_SUITE_LOG)" | \ - $(am__rst_title); \ - create_testsuite_report --no-color; \ - echo; \ - echo ".. contents:: :depth: 2"; \ - echo; \ - for b in $$bases; do echo $$b; done \ - | $(am__create_global_log); \ - } >$(TEST_SUITE_LOG).tmp || exit 1; \ - mv $(TEST_SUITE_LOG).tmp $(TEST_SUITE_LOG); \ - if $$success; then \ - col="$$grn"; \ - else \ - col="$$red"; \ - test x"$$VERBOSE" = x || cat $(TEST_SUITE_LOG); \ - fi; \ - echo "$${col}$$br$${std}"; \ - echo "$${col}Testsuite summary for $(PACKAGE_STRING)$${std}"; \ - echo "$${col}$$br$${std}"; \ - create_testsuite_report --maybe-color; \ - echo "$$col$$br$$std"; \ - if $$success; then :; else \ - echo "$${col}See $(subdir)/$(TEST_SUITE_LOG)$${std}"; \ - if test -n "$(PACKAGE_BUGREPORT)"; then \ - echo "$${col}Please report to $(PACKAGE_BUGREPORT)$${std}"; \ - fi; \ - echo "$$col$$br$$std"; \ - fi; \ - $$success || exit 1 - -check-TESTS: $(check_PROGRAMS) - @list='$(RECHECK_LOGS)'; test -z "$$list" || rm -f $$list - @list='$(RECHECK_LOGS:.log=.trs)'; test -z "$$list" || rm -f $$list - @test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG) - @set +e; $(am__set_TESTS_bases); \ - log_list=`for i in $$bases; do echo $$i.log; done`; \ - trs_list=`for i in $$bases; do echo $$i.trs; done`; \ - log_list=`echo $$log_list`; trs_list=`echo $$trs_list`; \ - $(MAKE) $(AM_MAKEFLAGS) $(TEST_SUITE_LOG) TEST_LOGS="$$log_list"; \ - exit $$?; -recheck: all $(check_PROGRAMS) - @test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG) - @set +e; $(am__set_TESTS_bases); \ - bases=`for i in $$bases; do echo $$i; done \ - | $(am__list_recheck_tests)` || exit 1; \ - log_list=`for i in $$bases; do echo $$i.log; done`; \ - log_list=`echo $$log_list`; \ - $(MAKE) $(AM_MAKEFLAGS) $(TEST_SUITE_LOG) \ - am__force_recheck=am--force-recheck \ - TEST_LOGS="$$log_list"; \ - exit $$? -tests/pngtest-all.log: tests/pngtest-all - @p='tests/pngtest-all'; \ - b='tests/pngtest-all'; \ - $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ - --log-file $$b.log --trs-file $$b.trs \ - $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ - "$$tst" $(AM_TESTS_FD_REDIRECT) -tests/pngvalid-gamma-16-to-8.log: tests/pngvalid-gamma-16-to-8 - @p='tests/pngvalid-gamma-16-to-8'; \ - b='tests/pngvalid-gamma-16-to-8'; \ - $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ - --log-file $$b.log --trs-file $$b.trs \ - $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ - "$$tst" $(AM_TESTS_FD_REDIRECT) -tests/pngvalid-gamma-alpha-mode.log: tests/pngvalid-gamma-alpha-mode - @p='tests/pngvalid-gamma-alpha-mode'; \ - b='tests/pngvalid-gamma-alpha-mode'; \ - $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ - --log-file $$b.log --trs-file $$b.trs \ - $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ - "$$tst" $(AM_TESTS_FD_REDIRECT) -tests/pngvalid-gamma-background.log: tests/pngvalid-gamma-background - @p='tests/pngvalid-gamma-background'; \ - b='tests/pngvalid-gamma-background'; \ - $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ - --log-file $$b.log --trs-file $$b.trs \ - $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ - "$$tst" $(AM_TESTS_FD_REDIRECT) -tests/pngvalid-gamma-expand16-alpha-mode.log: tests/pngvalid-gamma-expand16-alpha-mode - @p='tests/pngvalid-gamma-expand16-alpha-mode'; \ - b='tests/pngvalid-gamma-expand16-alpha-mode'; \ - $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ - --log-file $$b.log --trs-file $$b.trs \ - $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ - "$$tst" $(AM_TESTS_FD_REDIRECT) -tests/pngvalid-gamma-expand16-background.log: tests/pngvalid-gamma-expand16-background - @p='tests/pngvalid-gamma-expand16-background'; \ - b='tests/pngvalid-gamma-expand16-background'; \ - $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ - --log-file $$b.log --trs-file $$b.trs \ - $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ - "$$tst" $(AM_TESTS_FD_REDIRECT) -tests/pngvalid-gamma-expand16-transform.log: tests/pngvalid-gamma-expand16-transform - @p='tests/pngvalid-gamma-expand16-transform'; \ - b='tests/pngvalid-gamma-expand16-transform'; \ - $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ - --log-file $$b.log --trs-file $$b.trs \ - $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ - "$$tst" $(AM_TESTS_FD_REDIRECT) -tests/pngvalid-gamma-sbit.log: tests/pngvalid-gamma-sbit - @p='tests/pngvalid-gamma-sbit'; \ - b='tests/pngvalid-gamma-sbit'; \ - $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ - --log-file $$b.log --trs-file $$b.trs \ - $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ - "$$tst" $(AM_TESTS_FD_REDIRECT) -tests/pngvalid-gamma-threshold.log: tests/pngvalid-gamma-threshold - @p='tests/pngvalid-gamma-threshold'; \ - b='tests/pngvalid-gamma-threshold'; \ - $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ - --log-file $$b.log --trs-file $$b.trs \ - $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ - "$$tst" $(AM_TESTS_FD_REDIRECT) -tests/pngvalid-gamma-transform.log: tests/pngvalid-gamma-transform - @p='tests/pngvalid-gamma-transform'; \ - b='tests/pngvalid-gamma-transform'; \ - $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ - --log-file $$b.log --trs-file $$b.trs \ - $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ - "$$tst" $(AM_TESTS_FD_REDIRECT) -tests/pngvalid-progressive-size.log: tests/pngvalid-progressive-size - @p='tests/pngvalid-progressive-size'; \ - b='tests/pngvalid-progressive-size'; \ - $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ - --log-file $$b.log --trs-file $$b.trs \ - $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ - "$$tst" $(AM_TESTS_FD_REDIRECT) -tests/pngvalid-progressive-interlace-standard.log: tests/pngvalid-progressive-interlace-standard - @p='tests/pngvalid-progressive-interlace-standard'; \ - b='tests/pngvalid-progressive-interlace-standard'; \ - $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ - --log-file $$b.log --trs-file $$b.trs \ - $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ - "$$tst" $(AM_TESTS_FD_REDIRECT) -tests/pngvalid-transform.log: tests/pngvalid-transform - @p='tests/pngvalid-transform'; \ - b='tests/pngvalid-transform'; \ - $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ - --log-file $$b.log --trs-file $$b.trs \ - $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ - "$$tst" $(AM_TESTS_FD_REDIRECT) -tests/pngvalid-progressive-standard.log: tests/pngvalid-progressive-standard - @p='tests/pngvalid-progressive-standard'; \ - b='tests/pngvalid-progressive-standard'; \ - $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ - --log-file $$b.log --trs-file $$b.trs \ - $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ - "$$tst" $(AM_TESTS_FD_REDIRECT) -tests/pngvalid-standard.log: tests/pngvalid-standard - @p='tests/pngvalid-standard'; \ - b='tests/pngvalid-standard'; \ - $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ - --log-file $$b.log --trs-file $$b.trs \ - $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ - "$$tst" $(AM_TESTS_FD_REDIRECT) -tests/pngstest-1.8.log: tests/pngstest-1.8 - @p='tests/pngstest-1.8'; \ - b='tests/pngstest-1.8'; \ - $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ - --log-file $$b.log --trs-file $$b.trs \ - $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ - "$$tst" $(AM_TESTS_FD_REDIRECT) -tests/pngstest-1.8-alpha.log: tests/pngstest-1.8-alpha - @p='tests/pngstest-1.8-alpha'; \ - b='tests/pngstest-1.8-alpha'; \ - $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ - --log-file $$b.log --trs-file $$b.trs \ - $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ - "$$tst" $(AM_TESTS_FD_REDIRECT) -tests/pngstest-linear.log: tests/pngstest-linear - @p='tests/pngstest-linear'; \ - b='tests/pngstest-linear'; \ - $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ - --log-file $$b.log --trs-file $$b.trs \ - $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ - "$$tst" $(AM_TESTS_FD_REDIRECT) -tests/pngstest-linear-alpha.log: tests/pngstest-linear-alpha - @p='tests/pngstest-linear-alpha'; \ - b='tests/pngstest-linear-alpha'; \ - $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ - --log-file $$b.log --trs-file $$b.trs \ - $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ - "$$tst" $(AM_TESTS_FD_REDIRECT) -tests/pngstest-none.log: tests/pngstest-none - @p='tests/pngstest-none'; \ - b='tests/pngstest-none'; \ - $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ - --log-file $$b.log --trs-file $$b.trs \ - $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ - "$$tst" $(AM_TESTS_FD_REDIRECT) -tests/pngstest-none-alpha.log: tests/pngstest-none-alpha - @p='tests/pngstest-none-alpha'; \ - b='tests/pngstest-none-alpha'; \ - $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ - --log-file $$b.log --trs-file $$b.trs \ - $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ - "$$tst" $(AM_TESTS_FD_REDIRECT) -tests/pngstest-sRGB.log: tests/pngstest-sRGB - @p='tests/pngstest-sRGB'; \ - b='tests/pngstest-sRGB'; \ - $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ - --log-file $$b.log --trs-file $$b.trs \ - $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ - "$$tst" $(AM_TESTS_FD_REDIRECT) -tests/pngstest-sRGB-alpha.log: tests/pngstest-sRGB-alpha - @p='tests/pngstest-sRGB-alpha'; \ - b='tests/pngstest-sRGB-alpha'; \ - $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ - --log-file $$b.log --trs-file $$b.trs \ - $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ - "$$tst" $(AM_TESTS_FD_REDIRECT) -tests/pngunknown-IDAT.log: tests/pngunknown-IDAT - @p='tests/pngunknown-IDAT'; \ - b='tests/pngunknown-IDAT'; \ - $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ - --log-file $$b.log --trs-file $$b.trs \ - $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ - "$$tst" $(AM_TESTS_FD_REDIRECT) -tests/pngunknown-discard.log: tests/pngunknown-discard - @p='tests/pngunknown-discard'; \ - b='tests/pngunknown-discard'; \ - $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ - --log-file $$b.log --trs-file $$b.trs \ - $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ - "$$tst" $(AM_TESTS_FD_REDIRECT) -tests/pngunknown-if-safe.log: tests/pngunknown-if-safe - @p='tests/pngunknown-if-safe'; \ - b='tests/pngunknown-if-safe'; \ - $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ - --log-file $$b.log --trs-file $$b.trs \ - $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ - "$$tst" $(AM_TESTS_FD_REDIRECT) -tests/pngunknown-sAPI.log: tests/pngunknown-sAPI - @p='tests/pngunknown-sAPI'; \ - b='tests/pngunknown-sAPI'; \ - $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ - --log-file $$b.log --trs-file $$b.trs \ - $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ - "$$tst" $(AM_TESTS_FD_REDIRECT) -tests/pngunknown-sTER.log: tests/pngunknown-sTER - @p='tests/pngunknown-sTER'; \ - b='tests/pngunknown-sTER'; \ - $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ - --log-file $$b.log --trs-file $$b.trs \ - $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ - "$$tst" $(AM_TESTS_FD_REDIRECT) -tests/pngunknown-save.log: tests/pngunknown-save - @p='tests/pngunknown-save'; \ - b='tests/pngunknown-save'; \ - $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ - --log-file $$b.log --trs-file $$b.trs \ - $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ - "$$tst" $(AM_TESTS_FD_REDIRECT) -tests/pngunknown-vpAg.log: tests/pngunknown-vpAg - @p='tests/pngunknown-vpAg'; \ - b='tests/pngunknown-vpAg'; \ - $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ - --log-file $$b.log --trs-file $$b.trs \ - $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ - "$$tst" $(AM_TESTS_FD_REDIRECT) -tests/pngimage-quick.log: tests/pngimage-quick - @p='tests/pngimage-quick'; \ - b='tests/pngimage-quick'; \ - $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ - --log-file $$b.log --trs-file $$b.trs \ - $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ - "$$tst" $(AM_TESTS_FD_REDIRECT) -tests/pngimage-full.log: tests/pngimage-full - @p='tests/pngimage-full'; \ - b='tests/pngimage-full'; \ - $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ - --log-file $$b.log --trs-file $$b.trs \ - $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ - "$$tst" $(AM_TESTS_FD_REDIRECT) -.test.log: - @p='$<'; \ - $(am__set_b); \ - $(am__check_pre) $(TEST_LOG_DRIVER) --test-name "$$f" \ - --log-file $$b.log --trs-file $$b.trs \ - $(am__common_driver_flags) $(AM_TEST_LOG_DRIVER_FLAGS) $(TEST_LOG_DRIVER_FLAGS) -- $(TEST_LOG_COMPILE) \ - "$$tst" $(AM_TESTS_FD_REDIRECT) -@am__EXEEXT_TRUE@.test$(EXEEXT).log: -@am__EXEEXT_TRUE@ @p='$<'; \ -@am__EXEEXT_TRUE@ $(am__set_b); \ -@am__EXEEXT_TRUE@ $(am__check_pre) $(TEST_LOG_DRIVER) --test-name "$$f" \ -@am__EXEEXT_TRUE@ --log-file $$b.log --trs-file $$b.trs \ -@am__EXEEXT_TRUE@ $(am__common_driver_flags) $(AM_TEST_LOG_DRIVER_FLAGS) $(TEST_LOG_DRIVER_FLAGS) -- $(TEST_LOG_COMPILE) \ -@am__EXEEXT_TRUE@ "$$tst" $(AM_TESTS_FD_REDIRECT) - -distdir: $(BUILT_SOURCES) - $(MAKE) $(AM_MAKEFLAGS) distdir-am - -distdir-am: $(DISTFILES) - $(am__remove_distdir) - test -d "$(distdir)" || mkdir "$(distdir)" - @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - list='$(DISTFILES)'; \ - dist_files=`for file in $$list; do echo $$file; done | \ - sed -e "s|^$$srcdirstrip/||;t" \ - -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ - case $$dist_files in \ - */*) $(MKDIR_P) `echo "$$dist_files" | \ - sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ - sort -u` ;; \ - esac; \ - for file in $$dist_files; do \ - if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ - if test -d $$d/$$file; then \ - dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ - if test -d "$(distdir)/$$file"; then \ - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ - fi; \ - if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ - cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ - fi; \ - cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ - else \ - test -f "$(distdir)/$$file" \ - || cp -p $$d/$$file "$(distdir)/$$file" \ - || exit 1; \ - fi; \ - done - $(MAKE) $(AM_MAKEFLAGS) \ - top_distdir="$(top_distdir)" distdir="$(distdir)" \ - dist-hook - -test -n "$(am__skip_mode_fix)" \ - || find "$(distdir)" -type d ! -perm -755 \ - -exec chmod u+rwx,go+rx {} \; -o \ - ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \ - ! -type d ! -perm -400 -exec chmod a+r {} \; -o \ - ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \ - || chmod -R a+r "$(distdir)" -dist-gzip: distdir - tardir=$(distdir) && $(am__tar) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).tar.gz - $(am__post_remove_distdir) - -dist-bzip2: distdir - tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2 - $(am__post_remove_distdir) - -dist-lzip: distdir - tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz - $(am__post_remove_distdir) -dist-xz: distdir - tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz - $(am__post_remove_distdir) - -dist-tarZ: distdir - @echo WARNING: "Support for distribution archives compressed with" \ - "legacy program 'compress' is deprecated." >&2 - @echo WARNING: "It will be removed altogether in Automake 2.0" >&2 - tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z - $(am__post_remove_distdir) - -dist-shar: distdir - @echo WARNING: "Support for shar distribution archives is" \ - "deprecated." >&2 - @echo WARNING: "It will be removed altogether in Automake 2.0" >&2 - shar $(distdir) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).shar.gz - $(am__post_remove_distdir) - -dist-zip: distdir - -rm -f $(distdir).zip - zip -rq $(distdir).zip $(distdir) - $(am__post_remove_distdir) - -dist dist-all: - $(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:' - $(am__post_remove_distdir) - -# This target untars the dist file and tries a VPATH configuration. Then -# it guarantees that the distribution is self-contained by making another -# tarfile. -distcheck: dist - case '$(DIST_ARCHIVES)' in \ - *.tar.gz*) \ - eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).tar.gz | $(am__untar) ;;\ - *.tar.bz2*) \ - bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\ - *.tar.lz*) \ - lzip -dc $(distdir).tar.lz | $(am__untar) ;;\ - *.tar.xz*) \ - xz -dc $(distdir).tar.xz | $(am__untar) ;;\ - *.tar.Z*) \ - uncompress -c $(distdir).tar.Z | $(am__untar) ;;\ - *.shar.gz*) \ - eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).shar.gz | unshar ;;\ - *.zip*) \ - unzip $(distdir).zip ;;\ - esac - chmod -R a-w $(distdir) - chmod u+w $(distdir) - mkdir $(distdir)/_build $(distdir)/_build/sub $(distdir)/_inst - chmod a-w $(distdir) - test -d $(distdir)/_build || exit 0; \ - dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ - && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \ - && am__cwd=`pwd` \ - && $(am__cd) $(distdir)/_build/sub \ - && ../../configure \ - $(AM_DISTCHECK_CONFIGURE_FLAGS) \ - $(DISTCHECK_CONFIGURE_FLAGS) \ - --srcdir=../.. --prefix="$$dc_install_base" \ - && $(MAKE) $(AM_MAKEFLAGS) \ - && $(MAKE) $(AM_MAKEFLAGS) dvi \ - && $(MAKE) $(AM_MAKEFLAGS) check \ - && $(MAKE) $(AM_MAKEFLAGS) install \ - && $(MAKE) $(AM_MAKEFLAGS) installcheck \ - && $(MAKE) $(AM_MAKEFLAGS) uninstall \ - && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \ - distuninstallcheck \ - && chmod -R a-w "$$dc_install_base" \ - && ({ \ - (cd ../.. && umask 077 && mkdir "$$dc_destdir") \ - && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \ - && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \ - && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \ - distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \ - } || { rm -rf "$$dc_destdir"; exit 1; }) \ - && rm -rf "$$dc_destdir" \ - && $(MAKE) $(AM_MAKEFLAGS) dist \ - && rm -rf $(DIST_ARCHIVES) \ - && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \ - && cd "$$am__cwd" \ - || exit 1 - $(am__post_remove_distdir) - @(echo "$(distdir) archives ready for distribution: "; \ - list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \ - sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x' -distuninstallcheck: - @test -n '$(distuninstallcheck_dir)' || { \ - echo 'ERROR: trying to run $@ with an empty' \ - '$$(distuninstallcheck_dir)' >&2; \ - exit 1; \ - }; \ - $(am__cd) '$(distuninstallcheck_dir)' || { \ - echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \ - exit 1; \ - }; \ - test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \ - || { echo "ERROR: files left after uninstall:" ; \ - if test -n "$(DESTDIR)"; then \ - echo " (check DESTDIR support)"; \ - fi ; \ - $(distuninstallcheck_listfiles) ; \ - exit 1; } >&2 -distcleancheck: distclean - @if test '$(srcdir)' = . ; then \ - echo "ERROR: distcleancheck can only run from a VPATH build" ; \ - exit 1 ; \ - fi - @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \ - || { echo "ERROR: files left in build directory after distclean:" ; \ - $(distcleancheck_listfiles) ; \ - exit 1; } >&2 -check-am: all-am - $(MAKE) $(AM_MAKEFLAGS) $(check_PROGRAMS) - $(MAKE) $(AM_MAKEFLAGS) check-TESTS -check: $(BUILT_SOURCES) - $(MAKE) $(AM_MAKEFLAGS) check-am -all-am: Makefile $(PROGRAMS) $(LTLIBRARIES) $(SCRIPTS) $(MANS) $(DATA) \ - $(HEADERS) config.h -install-binPROGRAMS: install-libLTLIBRARIES - -installdirs: - for dir in "$(DESTDIR)$(bindir)" "$(DESTDIR)$(libdir)" "$(DESTDIR)$(bindir)" "$(DESTDIR)$(man3dir)" "$(DESTDIR)$(man5dir)" "$(DESTDIR)$(pkgconfigdir)" "$(DESTDIR)$(pkgincludedir)" "$(DESTDIR)$(pkgincludedir)"; do \ - test -z "$$dir" || $(MKDIR_P) "$$dir"; \ - done -install: $(BUILT_SOURCES) - $(MAKE) $(AM_MAKEFLAGS) install-am -install-exec: install-exec-am -install-data: install-data-am -uninstall: uninstall-am - -install-am: all-am - @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am - -installcheck: installcheck-am -install-strip: - if test -z '$(STRIP)'; then \ - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - install; \ - else \ - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ - fi -mostlyclean-generic: - -test -z "$(TEST_LOGS)" || rm -f $(TEST_LOGS) - -test -z "$(TEST_LOGS:.log=.trs)" || rm -f $(TEST_LOGS:.log=.trs) - -test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG) - -clean-generic: - -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES) - -distclean-generic: - -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) - -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) - -rm -f arm/$(DEPDIR)/$(am__dirstamp) - -rm -f arm/$(am__dirstamp) - -rm -f contrib/libtests/$(DEPDIR)/$(am__dirstamp) - -rm -f contrib/libtests/$(am__dirstamp) - -rm -f contrib/tools/$(DEPDIR)/$(am__dirstamp) - -rm -f contrib/tools/$(am__dirstamp) - -rm -f intel/$(DEPDIR)/$(am__dirstamp) - -rm -f intel/$(am__dirstamp) - -rm -f mips/$(DEPDIR)/$(am__dirstamp) - -rm -f mips/$(am__dirstamp) - -rm -f powerpc/$(DEPDIR)/$(am__dirstamp) - -rm -f powerpc/$(am__dirstamp) - -maintainer-clean-generic: - @echo "This command is intended for maintainers to use" - @echo "it deletes files that may require special tools to rebuild." - -test -z "$(BUILT_SOURCES)" || rm -f $(BUILT_SOURCES) - -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES) -@DO_INSTALL_LIBPNG_CONFIG_FALSE@@DO_INSTALL_LINKS_FALSE@install-exec-hook: -@DO_INSTALL_LIBPNG_PC_FALSE@@DO_INSTALL_LINKS_FALSE@install-data-hook: -@DO_INSTALL_LIBPNG_CONFIG_FALSE@@DO_INSTALL_LIBPNG_PC_FALSE@@DO_INSTALL_LINKS_FALSE@uninstall-hook: -clean: clean-am - -clean-am: clean-binPROGRAMS clean-checkPROGRAMS clean-generic \ - clean-libLTLIBRARIES clean-libtool mostlyclean-am - -distclean: distclean-am - -rm -f $(am__CONFIG_DISTCLEAN_FILES) - -rm -f ./$(DEPDIR)/png.Plo - -rm -f ./$(DEPDIR)/pngerror.Plo - -rm -f ./$(DEPDIR)/pngget.Plo - -rm -f ./$(DEPDIR)/pngmem.Plo - -rm -f ./$(DEPDIR)/pngpread.Plo - -rm -f ./$(DEPDIR)/pngread.Plo - -rm -f ./$(DEPDIR)/pngrio.Plo - -rm -f ./$(DEPDIR)/pngrtran.Plo - -rm -f ./$(DEPDIR)/pngrutil.Plo - -rm -f ./$(DEPDIR)/pngset.Plo - -rm -f ./$(DEPDIR)/pngtest.Po - -rm -f ./$(DEPDIR)/pngtrans.Plo - -rm -f ./$(DEPDIR)/pngwio.Plo - -rm -f ./$(DEPDIR)/pngwrite.Plo - -rm -f ./$(DEPDIR)/pngwtran.Plo - -rm -f ./$(DEPDIR)/pngwutil.Plo - -rm -f arm/$(DEPDIR)/arm_init.Plo - -rm -f arm/$(DEPDIR)/filter_neon.Plo - -rm -f arm/$(DEPDIR)/filter_neon_intrinsics.Plo - -rm -f arm/$(DEPDIR)/palette_neon_intrinsics.Plo - -rm -f contrib/libtests/$(DEPDIR)/pngimage.Po - -rm -f contrib/libtests/$(DEPDIR)/pngstest.Po - -rm -f contrib/libtests/$(DEPDIR)/pngunknown.Po - -rm -f contrib/libtests/$(DEPDIR)/pngvalid.Po - -rm -f contrib/libtests/$(DEPDIR)/timepng.Po - -rm -f contrib/tools/$(DEPDIR)/png-fix-itxt.Po - -rm -f contrib/tools/$(DEPDIR)/pngcp.Po - -rm -f contrib/tools/$(DEPDIR)/pngfix.Po - -rm -f intel/$(DEPDIR)/filter_sse2_intrinsics.Plo - -rm -f intel/$(DEPDIR)/intel_init.Plo - -rm -f mips/$(DEPDIR)/filter_msa_intrinsics.Plo - -rm -f mips/$(DEPDIR)/mips_init.Plo - -rm -f powerpc/$(DEPDIR)/filter_vsx_intrinsics.Plo - -rm -f powerpc/$(DEPDIR)/powerpc_init.Plo - -rm -f Makefile -distclean-am: clean-am distclean-compile distclean-generic \ - distclean-hdr distclean-libtool distclean-tags - -dvi: dvi-am - -dvi-am: - -html: html-am - -html-am: - -info: info-am - -info-am: - -install-data-am: install-man install-nodist_pkgincludeHEADERS \ - install-pkgconfigDATA install-pkgincludeHEADERS - @$(NORMAL_INSTALL) - $(MAKE) $(AM_MAKEFLAGS) install-data-hook -install-dvi: install-dvi-am - -install-dvi-am: - -install-exec-am: install-binPROGRAMS install-binSCRIPTS \ - install-libLTLIBRARIES - @$(NORMAL_INSTALL) - $(MAKE) $(AM_MAKEFLAGS) install-exec-hook -install-html: install-html-am - -install-html-am: - -install-info: install-info-am - -install-info-am: - -install-man: install-man3 install-man5 - -install-pdf: install-pdf-am - -install-pdf-am: - -install-ps: install-ps-am - -install-ps-am: - -installcheck-am: - -maintainer-clean: maintainer-clean-am - -rm -f $(am__CONFIG_DISTCLEAN_FILES) - -rm -rf $(top_srcdir)/autom4te.cache - -rm -f ./$(DEPDIR)/png.Plo - -rm -f ./$(DEPDIR)/pngerror.Plo - -rm -f ./$(DEPDIR)/pngget.Plo - -rm -f ./$(DEPDIR)/pngmem.Plo - -rm -f ./$(DEPDIR)/pngpread.Plo - -rm -f ./$(DEPDIR)/pngread.Plo - -rm -f ./$(DEPDIR)/pngrio.Plo - -rm -f ./$(DEPDIR)/pngrtran.Plo - -rm -f ./$(DEPDIR)/pngrutil.Plo - -rm -f ./$(DEPDIR)/pngset.Plo - -rm -f ./$(DEPDIR)/pngtest.Po - -rm -f ./$(DEPDIR)/pngtrans.Plo - -rm -f ./$(DEPDIR)/pngwio.Plo - -rm -f ./$(DEPDIR)/pngwrite.Plo - -rm -f ./$(DEPDIR)/pngwtran.Plo - -rm -f ./$(DEPDIR)/pngwutil.Plo - -rm -f arm/$(DEPDIR)/arm_init.Plo - -rm -f arm/$(DEPDIR)/filter_neon.Plo - -rm -f arm/$(DEPDIR)/filter_neon_intrinsics.Plo - -rm -f arm/$(DEPDIR)/palette_neon_intrinsics.Plo - -rm -f contrib/libtests/$(DEPDIR)/pngimage.Po - -rm -f contrib/libtests/$(DEPDIR)/pngstest.Po - -rm -f contrib/libtests/$(DEPDIR)/pngunknown.Po - -rm -f contrib/libtests/$(DEPDIR)/pngvalid.Po - -rm -f contrib/libtests/$(DEPDIR)/timepng.Po - -rm -f contrib/tools/$(DEPDIR)/png-fix-itxt.Po - -rm -f contrib/tools/$(DEPDIR)/pngcp.Po - -rm -f contrib/tools/$(DEPDIR)/pngfix.Po - -rm -f intel/$(DEPDIR)/filter_sse2_intrinsics.Plo - -rm -f intel/$(DEPDIR)/intel_init.Plo - -rm -f mips/$(DEPDIR)/filter_msa_intrinsics.Plo - -rm -f mips/$(DEPDIR)/mips_init.Plo - -rm -f powerpc/$(DEPDIR)/filter_vsx_intrinsics.Plo - -rm -f powerpc/$(DEPDIR)/powerpc_init.Plo - -rm -f Makefile -maintainer-clean-am: distclean-am maintainer-clean-generic - -mostlyclean: mostlyclean-am - -mostlyclean-am: mostlyclean-compile mostlyclean-generic \ - mostlyclean-libtool - -pdf: pdf-am - -pdf-am: - -ps: ps-am - -ps-am: - -uninstall-am: uninstall-binPROGRAMS uninstall-binSCRIPTS \ - uninstall-libLTLIBRARIES uninstall-man \ - uninstall-nodist_pkgincludeHEADERS uninstall-pkgconfigDATA \ - uninstall-pkgincludeHEADERS - @$(NORMAL_INSTALL) - $(MAKE) $(AM_MAKEFLAGS) uninstall-hook -uninstall-man: uninstall-man3 uninstall-man5 - -.MAKE: all check check-am install install-am install-data-am \ - install-exec-am install-strip uninstall-am - -.PHONY: CTAGS GTAGS TAGS all all-am am--depfiles am--refresh check \ - check-TESTS check-am clean clean-binPROGRAMS \ - clean-checkPROGRAMS clean-cscope clean-generic \ - clean-libLTLIBRARIES clean-libtool cscope cscopelist-am ctags \ - ctags-am dist dist-all dist-bzip2 dist-gzip dist-hook \ - dist-lzip dist-shar dist-tarZ dist-xz dist-zip distcheck \ - distclean distclean-compile distclean-generic distclean-hdr \ - distclean-libtool distclean-tags distcleancheck distdir \ - distuninstallcheck dvi dvi-am html html-am info info-am \ - install install-am install-binPROGRAMS install-binSCRIPTS \ - install-data install-data-am install-data-hook install-dvi \ - install-dvi-am install-exec install-exec-am install-exec-hook \ - install-html install-html-am install-info install-info-am \ - install-libLTLIBRARIES install-man install-man3 install-man5 \ - install-nodist_pkgincludeHEADERS install-pdf install-pdf-am \ - install-pkgconfigDATA install-pkgincludeHEADERS install-ps \ - install-ps-am install-strip installcheck installcheck-am \ - installdirs maintainer-clean maintainer-clean-generic \ - mostlyclean mostlyclean-compile mostlyclean-generic \ - mostlyclean-libtool pdf pdf-am ps ps-am recheck tags tags-am \ - uninstall uninstall-am uninstall-binPROGRAMS \ - uninstall-binSCRIPTS uninstall-hook uninstall-libLTLIBRARIES \ - uninstall-man uninstall-man3 uninstall-man5 \ - uninstall-nodist_pkgincludeHEADERS uninstall-pkgconfigDATA \ - uninstall-pkgincludeHEADERS - -.PRECIOUS: Makefile - - -$(PNGLIB_BASENAME).pc: libpng.pc - cp libpng.pc $@ - -$(PNGLIB_BASENAME)-config: libpng-config - cp libpng-config $@ - -scripts/sym.out scripts/vers.out: png.h pngconf.h pnglibconf.h -scripts/prefix.out: png.h pngconf.h pnglibconf.out -scripts/symbols.out: png.h pngconf.h $(srcdir)/scripts/pnglibconf.h.prebuilt -scripts/intprefix.out: pnglibconf.h - -libpng.sym: scripts/sym.out - rm -f $@ - cp $? $@ -libpng.vers: scripts/vers.out - rm -f $@ - cp $? $@ - -# Rename functions in scripts/prefix.out with a PNG_PREFIX prefix. -# Rename macros in scripts/macro.lst from PNG_PREFIXpng_ to PNG_ (the actual -# implementation of the macro). -@DO_PNG_PREFIX_TRUE@pnglibconf.h: pnglibconf.out scripts/prefix.out scripts/macro.lst -@DO_PNG_PREFIX_TRUE@ rm -f $@ -@DO_PNG_PREFIX_TRUE@ $(AWK) 's==0 && NR>1{print prev}\ -@DO_PNG_PREFIX_TRUE@ s==0{prev=$$0}\ -@DO_PNG_PREFIX_TRUE@ s==1{print "#define", $$1, "@PNG_PREFIX@" $$1}\ -@DO_PNG_PREFIX_TRUE@ s==2{print "#define @PNG_PREFIX@png_" $$1, "PNG_" $$1}\ -@DO_PNG_PREFIX_TRUE@ END{print prev}' s=0 pnglibconf.out s=1 scripts/prefix.out\ -@DO_PNG_PREFIX_TRUE@ s=2 ${srcdir}/scripts/macro.lst >pnglibconf.tf8 -@DO_PNG_PREFIX_TRUE@ mv pnglibconf.tf8 $@ - -@DO_PNG_PREFIX_TRUE@pngprefix.h: scripts/intprefix.out -@DO_PNG_PREFIX_TRUE@ rm -f pngprefix.tf1 -@DO_PNG_PREFIX_TRUE@ $(AWK) '{print "#define", $$1, "@PNG_PREFIX@" $$1}' $? >pngprefix.tf1 -@DO_PNG_PREFIX_TRUE@ mv pngprefix.tf1 $@ -@DO_PNG_PREFIX_FALSE@pnglibconf.h: pnglibconf.out -@DO_PNG_PREFIX_FALSE@ rm -f $@ -@DO_PNG_PREFIX_FALSE@ cp $? $@ - -@DO_PNG_PREFIX_FALSE@pngprefix.h: # is empty -@DO_PNG_PREFIX_FALSE@ :>$@ - -$(srcdir)/scripts/pnglibconf.h.prebuilt: - @echo "Attempting to build $@" >&2 - @echo "This is a machine generated file, but if you want to make" >&2 - @echo "a new one simply make 'scripts/pnglibconf.out', copy that" >&2 - @echo "AND set PNG_ZLIB_VERNUM to 0 (you MUST do this)" >&2 - @exit 1 - -# The following is necessary to ensure that the local pnglibconf.h is used, not -# an installed one (this can happen immediately after on a clean system if -# 'make test' is the first thing the user does.) Only files which include -# one of the png source files (typically png.h or pngpriv.h) need to be listed -# here: -pngtest.o: pnglibconf.h - -contrib/libtests/makepng.o: pnglibconf.h -contrib/libtests/pngstest.o: pnglibconf.h -contrib/libtests/pngunknown.o: pnglibconf.h -contrib/libtests/pngimage.o: pnglibconf.h -contrib/libtests/pngvalid.o: pnglibconf.h -contrib/libtests/readpng.o: pnglibconf.h -contrib/libtests/tarith.o: pnglibconf.h -contrib/libtests/timepng.o: pnglibconf.h - -contrib/tools/makesRGB.o: pnglibconf.h -contrib/tools/pngfix.o: pnglibconf.h -contrib/tools/pngcp.o: pnglibconf.h - -.c.out: - rm -f $@ $*.tf[12] - test -d scripts || mkdir scripts || test -d scripts - $(DFNCPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES)\ - $(CPPFLAGS) $(SYMBOL_CFLAGS) $< > $*.tf1 - $(AWK) -f "${srcdir}/scripts/dfn.awk" out="$*.tf2" $*.tf1 1>&2 - rm -f $*.tf1 - mv $*.tf2 $@ - -# The .c file for pnglibconf.h is machine generated -pnglibconf.c: scripts/pnglibconf.dfa scripts/options.awk pngconf.h pngusr.dfa $(DFA_XTRA) - rm -f $@ $*.tf[45] - $(AWK) -f ${srcdir}/scripts/options.awk out=$*.tf4 version=search\ - ${srcdir}/pngconf.h ${srcdir}/scripts/pnglibconf.dfa\ - ${srcdir}/pngusr.dfa $(DFA_XTRA) 1>&2 - $(AWK) -f ${srcdir}/scripts/options.awk out=$*.tf5 $*.tf4 1>&2 - rm $*.tf4 - mv $*.tf5 $@ - -# Symbol checks (.def and .out files should match) -scripts/symbols.chk: scripts/checksym.awk scripts/symbols.def scripts/symbols.out - -.out.chk: - rm -f $@ $*.new - $(AWK) -f ${srcdir}/scripts/checksym.awk ${srcdir}/scripts/${*F}.def\ - of="$*.new" $< >&2 - mv $*.new $@ - -# used on demand to regenerate the standard header, CPPFLAGS should -# be empty - no non-standard defines -scripts/pnglibconf.c: scripts/pnglibconf.dfa scripts/options.awk pngconf.h - rm -f $@ pnglibconf.tf[67] - test -z "$(CPPFLAGS)" - echo "com @PNGLIB_VERSION@ STANDARD API DEFINITION" |\ - $(AWK) -f ${srcdir}/scripts/options.awk out=pnglibconf.tf6\ - logunsupported=1 version=search ${srcdir}/pngconf.h -\ - ${srcdir}/scripts/pnglibconf.dfa 1>&2 - $(AWK) -f ${srcdir}/scripts/options.awk out=pnglibconf.tf7\ - pnglibconf.tf6 1>&2 - rm pnglibconf.tf6 - mv pnglibconf.tf7 $@ - -$(libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@_la_OBJECTS): png.h pngconf.h \ - pnglibconf.h pngpriv.h pngdebug.h pnginfo.h pngstruct.h pngprefix.h - -test: check-am - -# Extra checks -check: scripts/symbols.chk - -# Don't distribute the generated script files -dist-hook: - cd '$(top_distdir)'; rm -f $(SCRIPT_CLEANFILES) - -# Make links between installed files with release-specific names and the generic -# file names. If this install rule is run the generic names will be deleted and -# recreated - this has obvious issues for systems with multiple installations. - -install-header-links: - @set -ex; cd '$(DESTDIR)$(includedir)'; for f in $(HEADERS); do \ - rm -f "$$f"; $(LN_S) "$(PNGLIB_BASENAME)/$$f" "$$f"; done - -uninstall-header-links: - cd '$(DESTDIR)$(includedir)'; rm -f $(HEADERS) - -install-libpng-pc: - @set -ex; cd '$(DESTDIR)$(pkgconfigdir)'; rm -f libpng.pc; \ - $(LN_S) '$(PNGLIB_BASENAME).pc' libpng.pc - -uninstall-libpng-pc: - rm -f '$(DESTDIR)$(pkgconfigdir)/libpng.pc' - -install-library-links: - @set -x; cd '$(DESTDIR)$(libdir)';\ - for ext in $(EXT_LIST); do\ - rm -f "libpng.$$ext";\ - if test -f "$(PNGLIB_BASENAME).$$ext"; then\ - $(LN_S) "$(PNGLIB_BASENAME).$$ext" "libpng.$$ext" || exit 1;\ - fi;\ - done - -uninstall-library-links: - @set -x; cd '$(DESTDIR)$(libdir)'; for ext in $(EXT_LIST); do\ - rm -f "libpng.$$ext"; done - -install-libpng-config: - @set -ex; cd '$(DESTDIR)$(bindir)'; rm -f libpng-config; \ - $(LN_S) '$(PNGLIB_BASENAME)-config' libpng-config - -uninstall-libpng-config: - rm -f '$(DESTDIR)$(bindir)/libpng-config' - -# If --enable-unversioned-links is specified the header and lib file links -# will be automatically made on a 'make install': - -@DO_INSTALL_LINKS_TRUE@install-data-hook: install-header-links -@DO_INSTALL_LINKS_TRUE@uninstall-hook: uninstall-header-links -@DO_INSTALL_LINKS_TRUE@install-exec-hook: install-library-links -@DO_INSTALL_LINKS_TRUE@uninstall-hook: uninstall-library-links - -# Likewise, --install-pc causes libpng.pc to be constructed: - -@DO_INSTALL_LIBPNG_PC_TRUE@install-data-hook: install-libpng-pc -@DO_INSTALL_LIBPNG_PC_TRUE@uninstall-hook: uninstall-libpng-pc - -# And --install-config: - -@DO_INSTALL_LIBPNG_CONFIG_TRUE@install-exec-hook: install-libpng-config -@DO_INSTALL_LIBPNG_CONFIG_TRUE@uninstall-hook: uninstall-libpng-config - -# The following addition ensures that 'make all' always builds the test programs -# too. It used to, but some change either in libpng or configure stopped this -# working. -all-am: $(check_PROGRAMS) - -# Tell versions [3.59,3.63) of GNU make to not export all variables. -# Otherwise a system limit (for SysV at least) may be exceeded. -.NOEXPORT: diff --git a/aclocal.m4 b/aclocal.m4 deleted file mode 100644 index bc18c34f0..000000000 --- a/aclocal.m4 +++ /dev/null @@ -1,1196 +0,0 @@ -# generated automatically by aclocal 1.16.1 -*- Autoconf -*- - -# Copyright (C) 1996-2018 Free Software Foundation, Inc. - -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY, to the extent permitted by law; without -# even the implied warranty of MERCHANTABILITY or FITNESS FOR A -# PARTICULAR PURPOSE. - -m4_ifndef([AC_CONFIG_MACRO_DIRS], [m4_defun([_AM_CONFIG_MACRO_DIRS], [])m4_defun([AC_CONFIG_MACRO_DIRS], [_AM_CONFIG_MACRO_DIRS($@)])]) -m4_ifndef([AC_AUTOCONF_VERSION], - [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl -m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.69],, -[m4_warning([this file was generated for autoconf 2.69. -You have another version of autoconf. It may work, but is not guaranteed to. -If you have problems, you may need to regenerate the build system entirely. -To do so, use the procedure documented by the package, typically 'autoreconf'.])]) - -# Copyright (C) 2002-2018 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# AM_AUTOMAKE_VERSION(VERSION) -# ---------------------------- -# Automake X.Y traces this macro to ensure aclocal.m4 has been -# generated from the m4 files accompanying Automake X.Y. -# (This private macro should not be called outside this file.) -AC_DEFUN([AM_AUTOMAKE_VERSION], -[am__api_version='1.16' -dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to -dnl require some minimum version. Point them to the right macro. -m4_if([$1], [1.16.1], [], - [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl -]) - -# _AM_AUTOCONF_VERSION(VERSION) -# ----------------------------- -# aclocal traces this macro to find the Autoconf version. -# This is a private macro too. Using m4_define simplifies -# the logic in aclocal, which can simply ignore this definition. -m4_define([_AM_AUTOCONF_VERSION], []) - -# AM_SET_CURRENT_AUTOMAKE_VERSION -# ------------------------------- -# Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced. -# This function is AC_REQUIREd by AM_INIT_AUTOMAKE. -AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION], -[AM_AUTOMAKE_VERSION([1.16.1])dnl -m4_ifndef([AC_AUTOCONF_VERSION], - [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl -_AM_AUTOCONF_VERSION(m4_defn([AC_AUTOCONF_VERSION]))]) - -# Figure out how to run the assembler. -*- Autoconf -*- - -# Copyright (C) 2001-2018 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# AM_PROG_AS -# ---------- -AC_DEFUN([AM_PROG_AS], -[# By default we simply use the C compiler to build assembly code. -AC_REQUIRE([AC_PROG_CC]) -test "${CCAS+set}" = set || CCAS=$CC -test "${CCASFLAGS+set}" = set || CCASFLAGS=$CFLAGS -AC_ARG_VAR([CCAS], [assembler compiler command (defaults to CC)]) -AC_ARG_VAR([CCASFLAGS], [assembler compiler flags (defaults to CFLAGS)]) -_AM_IF_OPTION([no-dependencies],, [_AM_DEPENDENCIES([CCAS])])dnl -]) - -# AM_AUX_DIR_EXPAND -*- Autoconf -*- - -# Copyright (C) 2001-2018 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets -# $ac_aux_dir to '$srcdir/foo'. In other projects, it is set to -# '$srcdir', '$srcdir/..', or '$srcdir/../..'. -# -# Of course, Automake must honor this variable whenever it calls a -# tool from the auxiliary directory. The problem is that $srcdir (and -# therefore $ac_aux_dir as well) can be either absolute or relative, -# depending on how configure is run. This is pretty annoying, since -# it makes $ac_aux_dir quite unusable in subdirectories: in the top -# source directory, any form will work fine, but in subdirectories a -# relative path needs to be adjusted first. -# -# $ac_aux_dir/missing -# fails when called from a subdirectory if $ac_aux_dir is relative -# $top_srcdir/$ac_aux_dir/missing -# fails if $ac_aux_dir is absolute, -# fails when called from a subdirectory in a VPATH build with -# a relative $ac_aux_dir -# -# The reason of the latter failure is that $top_srcdir and $ac_aux_dir -# are both prefixed by $srcdir. In an in-source build this is usually -# harmless because $srcdir is '.', but things will broke when you -# start a VPATH build or use an absolute $srcdir. -# -# So we could use something similar to $top_srcdir/$ac_aux_dir/missing, -# iff we strip the leading $srcdir from $ac_aux_dir. That would be: -# am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"` -# and then we would define $MISSING as -# MISSING="\${SHELL} $am_aux_dir/missing" -# This will work as long as MISSING is not called from configure, because -# unfortunately $(top_srcdir) has no meaning in configure. -# However there are other variables, like CC, which are often used in -# configure, and could therefore not use this "fixed" $ac_aux_dir. -# -# Another solution, used here, is to always expand $ac_aux_dir to an -# absolute PATH. The drawback is that using absolute paths prevent a -# configured tree to be moved without reconfiguration. - -AC_DEFUN([AM_AUX_DIR_EXPAND], -[AC_REQUIRE([AC_CONFIG_AUX_DIR_DEFAULT])dnl -# Expand $ac_aux_dir to an absolute path. -am_aux_dir=`cd "$ac_aux_dir" && pwd` -]) - -# AM_CONDITIONAL -*- Autoconf -*- - -# Copyright (C) 1997-2018 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# AM_CONDITIONAL(NAME, SHELL-CONDITION) -# ------------------------------------- -# Define a conditional. -AC_DEFUN([AM_CONDITIONAL], -[AC_PREREQ([2.52])dnl - m4_if([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])], - [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl -AC_SUBST([$1_TRUE])dnl -AC_SUBST([$1_FALSE])dnl -_AM_SUBST_NOTMAKE([$1_TRUE])dnl -_AM_SUBST_NOTMAKE([$1_FALSE])dnl -m4_define([_AM_COND_VALUE_$1], [$2])dnl -if $2; then - $1_TRUE= - $1_FALSE='#' -else - $1_TRUE='#' - $1_FALSE= -fi -AC_CONFIG_COMMANDS_PRE( -[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then - AC_MSG_ERROR([[conditional "$1" was never defined. -Usually this means the macro was only invoked conditionally.]]) -fi])]) - -# Copyright (C) 1999-2018 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - - -# There are a few dirty hacks below to avoid letting 'AC_PROG_CC' be -# written in clear, in which case automake, when reading aclocal.m4, -# will think it sees a *use*, and therefore will trigger all it's -# C support machinery. Also note that it means that autoscan, seeing -# CC etc. in the Makefile, will ask for an AC_PROG_CC use... - - -# _AM_DEPENDENCIES(NAME) -# ---------------------- -# See how the compiler implements dependency checking. -# NAME is "CC", "CXX", "OBJC", "OBJCXX", "UPC", or "GJC". -# We try a few techniques and use that to set a single cache variable. -# -# We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was -# modified to invoke _AM_DEPENDENCIES(CC); we would have a circular -# dependency, and given that the user is not expected to run this macro, -# just rely on AC_PROG_CC. -AC_DEFUN([_AM_DEPENDENCIES], -[AC_REQUIRE([AM_SET_DEPDIR])dnl -AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl -AC_REQUIRE([AM_MAKE_INCLUDE])dnl -AC_REQUIRE([AM_DEP_TRACK])dnl - -m4_if([$1], [CC], [depcc="$CC" am_compiler_list=], - [$1], [CXX], [depcc="$CXX" am_compiler_list=], - [$1], [OBJC], [depcc="$OBJC" am_compiler_list='gcc3 gcc'], - [$1], [OBJCXX], [depcc="$OBJCXX" am_compiler_list='gcc3 gcc'], - [$1], [UPC], [depcc="$UPC" am_compiler_list=], - [$1], [GCJ], [depcc="$GCJ" am_compiler_list='gcc3 gcc'], - [depcc="$$1" am_compiler_list=]) - -AC_CACHE_CHECK([dependency style of $depcc], - [am_cv_$1_dependencies_compiler_type], -[if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then - # We make a subdir and do the tests there. Otherwise we can end up - # making bogus files that we don't know about and never remove. For - # instance it was reported that on HP-UX the gcc test will end up - # making a dummy file named 'D' -- because '-MD' means "put the output - # in D". - rm -rf conftest.dir - mkdir conftest.dir - # Copy depcomp to subdir because otherwise we won't find it if we're - # using a relative directory. - cp "$am_depcomp" conftest.dir - cd conftest.dir - # We will build objects and dependencies in a subdirectory because - # it helps to detect inapplicable dependency modes. For instance - # both Tru64's cc and ICC support -MD to output dependencies as a - # side effect of compilation, but ICC will put the dependencies in - # the current directory while Tru64 will put them in the object - # directory. - mkdir sub - - am_cv_$1_dependencies_compiler_type=none - if test "$am_compiler_list" = ""; then - am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp` - fi - am__universal=false - m4_case([$1], [CC], - [case " $depcc " in #( - *\ -arch\ *\ -arch\ *) am__universal=true ;; - esac], - [CXX], - [case " $depcc " in #( - *\ -arch\ *\ -arch\ *) am__universal=true ;; - esac]) - - for depmode in $am_compiler_list; do - # Setup a source with many dependencies, because some compilers - # like to wrap large dependency lists on column 80 (with \), and - # we should not choose a depcomp mode which is confused by this. - # - # We need to recreate these files for each test, as the compiler may - # overwrite some of them when testing with obscure command lines. - # This happens at least with the AIX C compiler. - : > sub/conftest.c - for i in 1 2 3 4 5 6; do - echo '#include "conftst'$i'.h"' >> sub/conftest.c - # Using ": > sub/conftst$i.h" creates only sub/conftst1.h with - # Solaris 10 /bin/sh. - echo '/* dummy */' > sub/conftst$i.h - done - echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf - - # We check with '-c' and '-o' for the sake of the "dashmstdout" - # mode. It turns out that the SunPro C++ compiler does not properly - # handle '-M -o', and we need to detect this. Also, some Intel - # versions had trouble with output in subdirs. - am__obj=sub/conftest.${OBJEXT-o} - am__minus_obj="-o $am__obj" - case $depmode in - gcc) - # This depmode causes a compiler race in universal mode. - test "$am__universal" = false || continue - ;; - nosideeffect) - # After this tag, mechanisms are not by side-effect, so they'll - # only be used when explicitly requested. - if test "x$enable_dependency_tracking" = xyes; then - continue - else - break - fi - ;; - msvc7 | msvc7msys | msvisualcpp | msvcmsys) - # This compiler won't grok '-c -o', but also, the minuso test has - # not run yet. These depmodes are late enough in the game, and - # so weak that their functioning should not be impacted. - am__obj=conftest.${OBJEXT-o} - am__minus_obj= - ;; - none) break ;; - esac - if depmode=$depmode \ - source=sub/conftest.c object=$am__obj \ - depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ - $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \ - >/dev/null 2>conftest.err && - grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && - grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && - grep $am__obj sub/conftest.Po > /dev/null 2>&1 && - ${MAKE-make} -s -f confmf > /dev/null 2>&1; then - # icc doesn't choke on unknown options, it will just issue warnings - # or remarks (even with -Werror). So we grep stderr for any message - # that says an option was ignored or not supported. - # When given -MP, icc 7.0 and 7.1 complain thusly: - # icc: Command line warning: ignoring option '-M'; no argument required - # The diagnosis changed in icc 8.0: - # icc: Command line remark: option '-MP' not supported - if (grep 'ignoring option' conftest.err || - grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else - am_cv_$1_dependencies_compiler_type=$depmode - break - fi - fi - done - - cd .. - rm -rf conftest.dir -else - am_cv_$1_dependencies_compiler_type=none -fi -]) -AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type]) -AM_CONDITIONAL([am__fastdep$1], [ - test "x$enable_dependency_tracking" != xno \ - && test "$am_cv_$1_dependencies_compiler_type" = gcc3]) -]) - - -# AM_SET_DEPDIR -# ------------- -# Choose a directory name for dependency files. -# This macro is AC_REQUIREd in _AM_DEPENDENCIES. -AC_DEFUN([AM_SET_DEPDIR], -[AC_REQUIRE([AM_SET_LEADING_DOT])dnl -AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl -]) - - -# AM_DEP_TRACK -# ------------ -AC_DEFUN([AM_DEP_TRACK], -[AC_ARG_ENABLE([dependency-tracking], [dnl -AS_HELP_STRING( - [--enable-dependency-tracking], - [do not reject slow dependency extractors]) -AS_HELP_STRING( - [--disable-dependency-tracking], - [speeds up one-time build])]) -if test "x$enable_dependency_tracking" != xno; then - am_depcomp="$ac_aux_dir/depcomp" - AMDEPBACKSLASH='\' - am__nodep='_no' -fi -AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno]) -AC_SUBST([AMDEPBACKSLASH])dnl -_AM_SUBST_NOTMAKE([AMDEPBACKSLASH])dnl -AC_SUBST([am__nodep])dnl -_AM_SUBST_NOTMAKE([am__nodep])dnl -]) - -# Generate code to set up dependency tracking. -*- Autoconf -*- - -# Copyright (C) 1999-2018 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# _AM_OUTPUT_DEPENDENCY_COMMANDS -# ------------------------------ -AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS], -[{ - # Older Autoconf quotes --file arguments for eval, but not when files - # are listed without --file. Let's play safe and only enable the eval - # if we detect the quoting. - # TODO: see whether this extra hack can be removed once we start - # requiring Autoconf 2.70 or later. - AS_CASE([$CONFIG_FILES], - [*\'*], [eval set x "$CONFIG_FILES"], - [*], [set x $CONFIG_FILES]) - shift - # Used to flag and report bootstrapping failures. - am_rc=0 - for am_mf - do - # Strip MF so we end up with the name of the file. - am_mf=`AS_ECHO(["$am_mf"]) | sed -e 's/:.*$//'` - # Check whether this is an Automake generated Makefile which includes - # dependency-tracking related rules and includes. - # Grep'ing the whole file directly is not great: AIX grep has a line - # limit of 2048, but all sed's we know have understand at least 4000. - sed -n 's,^am--depfiles:.*,X,p' "$am_mf" | grep X >/dev/null 2>&1 \ - || continue - am_dirpart=`AS_DIRNAME(["$am_mf"])` - am_filepart=`AS_BASENAME(["$am_mf"])` - AM_RUN_LOG([cd "$am_dirpart" \ - && sed -e '/# am--include-marker/d' "$am_filepart" \ - | $MAKE -f - am--depfiles]) || am_rc=$? - done - if test $am_rc -ne 0; then - AC_MSG_FAILURE([Something went wrong bootstrapping makefile fragments - for automatic dependency tracking. Try re-running configure with the - '--disable-dependency-tracking' option to at least be able to build - the package (albeit without support for automatic dependency tracking).]) - fi - AS_UNSET([am_dirpart]) - AS_UNSET([am_filepart]) - AS_UNSET([am_mf]) - AS_UNSET([am_rc]) - rm -f conftest-deps.mk -} -])# _AM_OUTPUT_DEPENDENCY_COMMANDS - - -# AM_OUTPUT_DEPENDENCY_COMMANDS -# ----------------------------- -# This macro should only be invoked once -- use via AC_REQUIRE. -# -# This code is only required when automatic dependency tracking is enabled. -# This creates each '.Po' and '.Plo' makefile fragment that we'll need in -# order to bootstrap the dependency handling code. -AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS], -[AC_CONFIG_COMMANDS([depfiles], - [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS], - [AMDEP_TRUE="$AMDEP_TRUE" MAKE="${MAKE-make}"])]) - -# Do all the work for Automake. -*- Autoconf -*- - -# Copyright (C) 1996-2018 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# This macro actually does too much. Some checks are only needed if -# your package does certain things. But this isn't really a big deal. - -dnl Redefine AC_PROG_CC to automatically invoke _AM_PROG_CC_C_O. -m4_define([AC_PROG_CC], -m4_defn([AC_PROG_CC]) -[_AM_PROG_CC_C_O -]) - -# AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE]) -# AM_INIT_AUTOMAKE([OPTIONS]) -# ----------------------------------------------- -# The call with PACKAGE and VERSION arguments is the old style -# call (pre autoconf-2.50), which is being phased out. PACKAGE -# and VERSION should now be passed to AC_INIT and removed from -# the call to AM_INIT_AUTOMAKE. -# We support both call styles for the transition. After -# the next Automake release, Autoconf can make the AC_INIT -# arguments mandatory, and then we can depend on a new Autoconf -# release and drop the old call support. -AC_DEFUN([AM_INIT_AUTOMAKE], -[AC_PREREQ([2.65])dnl -dnl Autoconf wants to disallow AM_ names. We explicitly allow -dnl the ones we care about. -m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl -AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl -AC_REQUIRE([AC_PROG_INSTALL])dnl -if test "`cd $srcdir && pwd`" != "`pwd`"; then - # Use -I$(srcdir) only when $(srcdir) != ., so that make's output - # is not polluted with repeated "-I." - AC_SUBST([am__isrc], [' -I$(srcdir)'])_AM_SUBST_NOTMAKE([am__isrc])dnl - # test to see if srcdir already configured - if test -f $srcdir/config.status; then - AC_MSG_ERROR([source directory already configured; run "make distclean" there first]) - fi -fi - -# test whether we have cygpath -if test -z "$CYGPATH_W"; then - if (cygpath --version) >/dev/null 2>/dev/null; then - CYGPATH_W='cygpath -w' - else - CYGPATH_W=echo - fi -fi -AC_SUBST([CYGPATH_W]) - -# Define the identity of the package. -dnl Distinguish between old-style and new-style calls. -m4_ifval([$2], -[AC_DIAGNOSE([obsolete], - [$0: two- and three-arguments forms are deprecated.]) -m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl - AC_SUBST([PACKAGE], [$1])dnl - AC_SUBST([VERSION], [$2])], -[_AM_SET_OPTIONS([$1])dnl -dnl Diagnose old-style AC_INIT with new-style AM_AUTOMAKE_INIT. -m4_if( - m4_ifdef([AC_PACKAGE_NAME], [ok]):m4_ifdef([AC_PACKAGE_VERSION], [ok]), - [ok:ok],, - [m4_fatal([AC_INIT should be called with package and version arguments])])dnl - AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl - AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl - -_AM_IF_OPTION([no-define],, -[AC_DEFINE_UNQUOTED([PACKAGE], ["$PACKAGE"], [Name of package]) - AC_DEFINE_UNQUOTED([VERSION], ["$VERSION"], [Version number of package])])dnl - -# Some tools Automake needs. -AC_REQUIRE([AM_SANITY_CHECK])dnl -AC_REQUIRE([AC_ARG_PROGRAM])dnl -AM_MISSING_PROG([ACLOCAL], [aclocal-${am__api_version}]) -AM_MISSING_PROG([AUTOCONF], [autoconf]) -AM_MISSING_PROG([AUTOMAKE], [automake-${am__api_version}]) -AM_MISSING_PROG([AUTOHEADER], [autoheader]) -AM_MISSING_PROG([MAKEINFO], [makeinfo]) -AC_REQUIRE([AM_PROG_INSTALL_SH])dnl -AC_REQUIRE([AM_PROG_INSTALL_STRIP])dnl -AC_REQUIRE([AC_PROG_MKDIR_P])dnl -# For better backward compatibility. To be removed once Automake 1.9.x -# dies out for good. For more background, see: -# -# -AC_SUBST([mkdir_p], ['$(MKDIR_P)']) -# We need awk for the "check" target (and possibly the TAP driver). The -# system "awk" is bad on some platforms. -AC_REQUIRE([AC_PROG_AWK])dnl -AC_REQUIRE([AC_PROG_MAKE_SET])dnl -AC_REQUIRE([AM_SET_LEADING_DOT])dnl -_AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])], - [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])], - [_AM_PROG_TAR([v7])])]) -_AM_IF_OPTION([no-dependencies],, -[AC_PROVIDE_IFELSE([AC_PROG_CC], - [_AM_DEPENDENCIES([CC])], - [m4_define([AC_PROG_CC], - m4_defn([AC_PROG_CC])[_AM_DEPENDENCIES([CC])])])dnl -AC_PROVIDE_IFELSE([AC_PROG_CXX], - [_AM_DEPENDENCIES([CXX])], - [m4_define([AC_PROG_CXX], - m4_defn([AC_PROG_CXX])[_AM_DEPENDENCIES([CXX])])])dnl -AC_PROVIDE_IFELSE([AC_PROG_OBJC], - [_AM_DEPENDENCIES([OBJC])], - [m4_define([AC_PROG_OBJC], - m4_defn([AC_PROG_OBJC])[_AM_DEPENDENCIES([OBJC])])])dnl -AC_PROVIDE_IFELSE([AC_PROG_OBJCXX], - [_AM_DEPENDENCIES([OBJCXX])], - [m4_define([AC_PROG_OBJCXX], - m4_defn([AC_PROG_OBJCXX])[_AM_DEPENDENCIES([OBJCXX])])])dnl -]) -AC_REQUIRE([AM_SILENT_RULES])dnl -dnl The testsuite driver may need to know about EXEEXT, so add the -dnl 'am__EXEEXT' conditional if _AM_COMPILER_EXEEXT was seen. This -dnl macro is hooked onto _AC_COMPILER_EXEEXT early, see below. -AC_CONFIG_COMMANDS_PRE(dnl -[m4_provide_if([_AM_COMPILER_EXEEXT], - [AM_CONDITIONAL([am__EXEEXT], [test -n "$EXEEXT"])])])dnl - -# POSIX will say in a future version that running "rm -f" with no argument -# is OK; and we want to be able to make that assumption in our Makefile -# recipes. So use an aggressive probe to check that the usage we want is -# actually supported "in the wild" to an acceptable degree. -# See automake bug#10828. -# To make any issue more visible, cause the running configure to be aborted -# by default if the 'rm' program in use doesn't match our expectations; the -# user can still override this though. -if rm -f && rm -fr && rm -rf; then : OK; else - cat >&2 <<'END' -Oops! - -Your 'rm' program seems unable to run without file operands specified -on the command line, even when the '-f' option is present. This is contrary -to the behaviour of most rm programs out there, and not conforming with -the upcoming POSIX standard: - -Please tell bug-automake@gnu.org about your system, including the value -of your $PATH and any error possibly output before this message. This -can help us improve future automake versions. - -END - if test x"$ACCEPT_INFERIOR_RM_PROGRAM" = x"yes"; then - echo 'Configuration will proceed anyway, since you have set the' >&2 - echo 'ACCEPT_INFERIOR_RM_PROGRAM variable to "yes"' >&2 - echo >&2 - else - cat >&2 <<'END' -Aborting the configuration process, to ensure you take notice of the issue. - -You can download and install GNU coreutils to get an 'rm' implementation -that behaves properly: . - -If you want to complete the configuration process using your problematic -'rm' anyway, export the environment variable ACCEPT_INFERIOR_RM_PROGRAM -to "yes", and re-run configure. - -END - AC_MSG_ERROR([Your 'rm' program is bad, sorry.]) - fi -fi -dnl The trailing newline in this macro's definition is deliberate, for -dnl backward compatibility and to allow trailing 'dnl'-style comments -dnl after the AM_INIT_AUTOMAKE invocation. See automake bug#16841. -]) - -dnl Hook into '_AC_COMPILER_EXEEXT' early to learn its expansion. Do not -dnl add the conditional right here, as _AC_COMPILER_EXEEXT may be further -dnl mangled by Autoconf and run in a shell conditional statement. -m4_define([_AC_COMPILER_EXEEXT], -m4_defn([_AC_COMPILER_EXEEXT])[m4_provide([_AM_COMPILER_EXEEXT])]) - -# When config.status generates a header, we must update the stamp-h file. -# This file resides in the same directory as the config header -# that is generated. The stamp files are numbered to have different names. - -# Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the -# loop where config.status creates the headers, so we can generate -# our stamp files there. -AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK], -[# Compute $1's index in $config_headers. -_am_arg=$1 -_am_stamp_count=1 -for _am_header in $config_headers :; do - case $_am_header in - $_am_arg | $_am_arg:* ) - break ;; - * ) - _am_stamp_count=`expr $_am_stamp_count + 1` ;; - esac -done -echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count]) - -# Copyright (C) 2001-2018 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# AM_PROG_INSTALL_SH -# ------------------ -# Define $install_sh. -AC_DEFUN([AM_PROG_INSTALL_SH], -[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl -if test x"${install_sh+set}" != xset; then - case $am_aux_dir in - *\ * | *\ *) - install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;; - *) - install_sh="\${SHELL} $am_aux_dir/install-sh" - esac -fi -AC_SUBST([install_sh])]) - -# Copyright (C) 2003-2018 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# Check whether the underlying file-system supports filenames -# with a leading dot. For instance MS-DOS doesn't. -AC_DEFUN([AM_SET_LEADING_DOT], -[rm -rf .tst 2>/dev/null -mkdir .tst 2>/dev/null -if test -d .tst; then - am__leading_dot=. -else - am__leading_dot=_ -fi -rmdir .tst 2>/dev/null -AC_SUBST([am__leading_dot])]) - -# Add --enable-maintainer-mode option to configure. -*- Autoconf -*- -# From Jim Meyering - -# Copyright (C) 1996-2018 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# AM_MAINTAINER_MODE([DEFAULT-MODE]) -# ---------------------------------- -# Control maintainer-specific portions of Makefiles. -# Default is to disable them, unless 'enable' is passed literally. -# For symmetry, 'disable' may be passed as well. Anyway, the user -# can override the default with the --enable/--disable switch. -AC_DEFUN([AM_MAINTAINER_MODE], -[m4_case(m4_default([$1], [disable]), - [enable], [m4_define([am_maintainer_other], [disable])], - [disable], [m4_define([am_maintainer_other], [enable])], - [m4_define([am_maintainer_other], [enable]) - m4_warn([syntax], [unexpected argument to AM@&t@_MAINTAINER_MODE: $1])]) -AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles]) - dnl maintainer-mode's default is 'disable' unless 'enable' is passed - AC_ARG_ENABLE([maintainer-mode], - [AS_HELP_STRING([--]am_maintainer_other[-maintainer-mode], - am_maintainer_other[ make rules and dependencies not useful - (and sometimes confusing) to the casual installer])], - [USE_MAINTAINER_MODE=$enableval], - [USE_MAINTAINER_MODE=]m4_if(am_maintainer_other, [enable], [no], [yes])) - AC_MSG_RESULT([$USE_MAINTAINER_MODE]) - AM_CONDITIONAL([MAINTAINER_MODE], [test $USE_MAINTAINER_MODE = yes]) - MAINT=$MAINTAINER_MODE_TRUE - AC_SUBST([MAINT])dnl -] -) - -# Check to see how 'make' treats includes. -*- Autoconf -*- - -# Copyright (C) 2001-2018 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# AM_MAKE_INCLUDE() -# ----------------- -# Check whether make has an 'include' directive that can support all -# the idioms we need for our automatic dependency tracking code. -AC_DEFUN([AM_MAKE_INCLUDE], -[AC_MSG_CHECKING([whether ${MAKE-make} supports the include directive]) -cat > confinc.mk << 'END' -am__doit: - @echo this is the am__doit target >confinc.out -.PHONY: am__doit -END -am__include="#" -am__quote= -# BSD make does it like this. -echo '.include "confinc.mk" # ignored' > confmf.BSD -# Other make implementations (GNU, Solaris 10, AIX) do it like this. -echo 'include confinc.mk # ignored' > confmf.GNU -_am_result=no -for s in GNU BSD; do - AM_RUN_LOG([${MAKE-make} -f confmf.$s && cat confinc.out]) - AS_CASE([$?:`cat confinc.out 2>/dev/null`], - ['0:this is the am__doit target'], - [AS_CASE([$s], - [BSD], [am__include='.include' am__quote='"'], - [am__include='include' am__quote=''])]) - if test "$am__include" != "#"; then - _am_result="yes ($s style)" - break - fi -done -rm -f confinc.* confmf.* -AC_MSG_RESULT([${_am_result}]) -AC_SUBST([am__include])]) -AC_SUBST([am__quote])]) - -# Fake the existence of programs that GNU maintainers use. -*- Autoconf -*- - -# Copyright (C) 1997-2018 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# AM_MISSING_PROG(NAME, PROGRAM) -# ------------------------------ -AC_DEFUN([AM_MISSING_PROG], -[AC_REQUIRE([AM_MISSING_HAS_RUN]) -$1=${$1-"${am_missing_run}$2"} -AC_SUBST($1)]) - -# AM_MISSING_HAS_RUN -# ------------------ -# Define MISSING if not defined so far and test if it is modern enough. -# If it is, set am_missing_run to use it, otherwise, to nothing. -AC_DEFUN([AM_MISSING_HAS_RUN], -[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl -AC_REQUIRE_AUX_FILE([missing])dnl -if test x"${MISSING+set}" != xset; then - case $am_aux_dir in - *\ * | *\ *) - MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;; - *) - MISSING="\${SHELL} $am_aux_dir/missing" ;; - esac -fi -# Use eval to expand $SHELL -if eval "$MISSING --is-lightweight"; then - am_missing_run="$MISSING " -else - am_missing_run= - AC_MSG_WARN(['missing' script is too old or missing]) -fi -]) - -# Helper functions for option handling. -*- Autoconf -*- - -# Copyright (C) 2001-2018 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# _AM_MANGLE_OPTION(NAME) -# ----------------------- -AC_DEFUN([_AM_MANGLE_OPTION], -[[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])]) - -# _AM_SET_OPTION(NAME) -# -------------------- -# Set option NAME. Presently that only means defining a flag for this option. -AC_DEFUN([_AM_SET_OPTION], -[m4_define(_AM_MANGLE_OPTION([$1]), [1])]) - -# _AM_SET_OPTIONS(OPTIONS) -# ------------------------ -# OPTIONS is a space-separated list of Automake options. -AC_DEFUN([_AM_SET_OPTIONS], -[m4_foreach_w([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])]) - -# _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET]) -# ------------------------------------------- -# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise. -AC_DEFUN([_AM_IF_OPTION], -[m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])]) - -# Copyright (C) 1999-2018 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# _AM_PROG_CC_C_O -# --------------- -# Like AC_PROG_CC_C_O, but changed for automake. We rewrite AC_PROG_CC -# to automatically call this. -AC_DEFUN([_AM_PROG_CC_C_O], -[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl -AC_REQUIRE_AUX_FILE([compile])dnl -AC_LANG_PUSH([C])dnl -AC_CACHE_CHECK( - [whether $CC understands -c and -o together], - [am_cv_prog_cc_c_o], - [AC_LANG_CONFTEST([AC_LANG_PROGRAM([])]) - # Make sure it works both with $CC and with simple cc. - # Following AC_PROG_CC_C_O, we do the test twice because some - # compilers refuse to overwrite an existing .o file with -o, - # though they will create one. - am_cv_prog_cc_c_o=yes - for am_i in 1 2; do - if AM_RUN_LOG([$CC -c conftest.$ac_ext -o conftest2.$ac_objext]) \ - && test -f conftest2.$ac_objext; then - : OK - else - am_cv_prog_cc_c_o=no - break - fi - done - rm -f core conftest* - unset am_i]) -if test "$am_cv_prog_cc_c_o" != yes; then - # Losing compiler, so override with the script. - # FIXME: It is wrong to rewrite CC. - # But if we don't then we get into trouble of one sort or another. - # A longer-term fix would be to have automake use am__CC in this case, - # and then we could set am__CC="\$(top_srcdir)/compile \$(CC)" - CC="$am_aux_dir/compile $CC" -fi -AC_LANG_POP([C])]) - -# For backward compatibility. -AC_DEFUN_ONCE([AM_PROG_CC_C_O], [AC_REQUIRE([AC_PROG_CC])]) - -# Copyright (C) 2001-2018 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# AM_RUN_LOG(COMMAND) -# ------------------- -# Run COMMAND, save the exit status in ac_status, and log it. -# (This has been adapted from Autoconf's _AC_RUN_LOG macro.) -AC_DEFUN([AM_RUN_LOG], -[{ echo "$as_me:$LINENO: $1" >&AS_MESSAGE_LOG_FD - ($1) >&AS_MESSAGE_LOG_FD 2>&AS_MESSAGE_LOG_FD - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD - (exit $ac_status); }]) - -# Check to make sure that the build environment is sane. -*- Autoconf -*- - -# Copyright (C) 1996-2018 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# AM_SANITY_CHECK -# --------------- -AC_DEFUN([AM_SANITY_CHECK], -[AC_MSG_CHECKING([whether build environment is sane]) -# Reject unsafe characters in $srcdir or the absolute working directory -# name. Accept space and tab only in the latter. -am_lf=' -' -case `pwd` in - *[[\\\"\#\$\&\'\`$am_lf]]*) - AC_MSG_ERROR([unsafe absolute working directory name]);; -esac -case $srcdir in - *[[\\\"\#\$\&\'\`$am_lf\ \ ]]*) - AC_MSG_ERROR([unsafe srcdir value: '$srcdir']);; -esac - -# Do 'set' in a subshell so we don't clobber the current shell's -# arguments. Must try -L first in case configure is actually a -# symlink; some systems play weird games with the mod time of symlinks -# (eg FreeBSD returns the mod time of the symlink's containing -# directory). -if ( - am_has_slept=no - for am_try in 1 2; do - echo "timestamp, slept: $am_has_slept" > conftest.file - set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null` - if test "$[*]" = "X"; then - # -L didn't work. - set X `ls -t "$srcdir/configure" conftest.file` - fi - if test "$[*]" != "X $srcdir/configure conftest.file" \ - && test "$[*]" != "X conftest.file $srcdir/configure"; then - - # If neither matched, then we have a broken ls. This can happen - # if, for instance, CONFIG_SHELL is bash and it inherits a - # broken ls alias from the environment. This has actually - # happened. Such a system could not be considered "sane". - AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken - alias in your environment]) - fi - if test "$[2]" = conftest.file || test $am_try -eq 2; then - break - fi - # Just in case. - sleep 1 - am_has_slept=yes - done - test "$[2]" = conftest.file - ) -then - # Ok. - : -else - AC_MSG_ERROR([newly created file is older than distributed files! -Check your system clock]) -fi -AC_MSG_RESULT([yes]) -# If we didn't sleep, we still need to ensure time stamps of config.status and -# generated files are strictly newer. -am_sleep_pid= -if grep 'slept: no' conftest.file >/dev/null 2>&1; then - ( sleep 1 ) & - am_sleep_pid=$! -fi -AC_CONFIG_COMMANDS_PRE( - [AC_MSG_CHECKING([that generated files are newer than configure]) - if test -n "$am_sleep_pid"; then - # Hide warnings about reused PIDs. - wait $am_sleep_pid 2>/dev/null - fi - AC_MSG_RESULT([done])]) -rm -f conftest.file -]) - -# Copyright (C) 2009-2018 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# AM_SILENT_RULES([DEFAULT]) -# -------------------------- -# Enable less verbose build rules; with the default set to DEFAULT -# ("yes" being less verbose, "no" or empty being verbose). -AC_DEFUN([AM_SILENT_RULES], -[AC_ARG_ENABLE([silent-rules], [dnl -AS_HELP_STRING( - [--enable-silent-rules], - [less verbose build output (undo: "make V=1")]) -AS_HELP_STRING( - [--disable-silent-rules], - [verbose build output (undo: "make V=0")])dnl -]) -case $enable_silent_rules in @%:@ ((( - yes) AM_DEFAULT_VERBOSITY=0;; - no) AM_DEFAULT_VERBOSITY=1;; - *) AM_DEFAULT_VERBOSITY=m4_if([$1], [yes], [0], [1]);; -esac -dnl -dnl A few 'make' implementations (e.g., NonStop OS and NextStep) -dnl do not support nested variable expansions. -dnl See automake bug#9928 and bug#10237. -am_make=${MAKE-make} -AC_CACHE_CHECK([whether $am_make supports nested variables], - [am_cv_make_support_nested_variables], - [if AS_ECHO([['TRUE=$(BAR$(V)) -BAR0=false -BAR1=true -V=1 -am__doit: - @$(TRUE) -.PHONY: am__doit']]) | $am_make -f - >/dev/null 2>&1; then - am_cv_make_support_nested_variables=yes -else - am_cv_make_support_nested_variables=no -fi]) -if test $am_cv_make_support_nested_variables = yes; then - dnl Using '$V' instead of '$(V)' breaks IRIX make. - AM_V='$(V)' - AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)' -else - AM_V=$AM_DEFAULT_VERBOSITY - AM_DEFAULT_V=$AM_DEFAULT_VERBOSITY -fi -AC_SUBST([AM_V])dnl -AM_SUBST_NOTMAKE([AM_V])dnl -AC_SUBST([AM_DEFAULT_V])dnl -AM_SUBST_NOTMAKE([AM_DEFAULT_V])dnl -AC_SUBST([AM_DEFAULT_VERBOSITY])dnl -AM_BACKSLASH='\' -AC_SUBST([AM_BACKSLASH])dnl -_AM_SUBST_NOTMAKE([AM_BACKSLASH])dnl -]) - -# Copyright (C) 2001-2018 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# AM_PROG_INSTALL_STRIP -# --------------------- -# One issue with vendor 'install' (even GNU) is that you can't -# specify the program used to strip binaries. This is especially -# annoying in cross-compiling environments, where the build's strip -# is unlikely to handle the host's binaries. -# Fortunately install-sh will honor a STRIPPROG variable, so we -# always use install-sh in "make install-strip", and initialize -# STRIPPROG with the value of the STRIP variable (set by the user). -AC_DEFUN([AM_PROG_INSTALL_STRIP], -[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl -# Installed binaries are usually stripped using 'strip' when the user -# run "make install-strip". However 'strip' might not be the right -# tool to use in cross-compilation environments, therefore Automake -# will honor the 'STRIP' environment variable to overrule this program. -dnl Don't test for $cross_compiling = yes, because it might be 'maybe'. -if test "$cross_compiling" != no; then - AC_CHECK_TOOL([STRIP], [strip], :) -fi -INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s" -AC_SUBST([INSTALL_STRIP_PROGRAM])]) - -# Copyright (C) 2006-2018 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# _AM_SUBST_NOTMAKE(VARIABLE) -# --------------------------- -# Prevent Automake from outputting VARIABLE = @VARIABLE@ in Makefile.in. -# This macro is traced by Automake. -AC_DEFUN([_AM_SUBST_NOTMAKE]) - -# AM_SUBST_NOTMAKE(VARIABLE) -# -------------------------- -# Public sister of _AM_SUBST_NOTMAKE. -AC_DEFUN([AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE($@)]) - -# Check how to create a tarball. -*- Autoconf -*- - -# Copyright (C) 2004-2018 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# _AM_PROG_TAR(FORMAT) -# -------------------- -# Check how to create a tarball in format FORMAT. -# FORMAT should be one of 'v7', 'ustar', or 'pax'. -# -# Substitute a variable $(am__tar) that is a command -# writing to stdout a FORMAT-tarball containing the directory -# $tardir. -# tardir=directory && $(am__tar) > result.tar -# -# Substitute a variable $(am__untar) that extract such -# a tarball read from stdin. -# $(am__untar) < result.tar -# -AC_DEFUN([_AM_PROG_TAR], -[# Always define AMTAR for backward compatibility. Yes, it's still used -# in the wild :-( We should find a proper way to deprecate it ... -AC_SUBST([AMTAR], ['$${TAR-tar}']) - -# We'll loop over all known methods to create a tar archive until one works. -_am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none' - -m4_if([$1], [v7], - [am__tar='$${TAR-tar} chof - "$$tardir"' am__untar='$${TAR-tar} xf -'], - - [m4_case([$1], - [ustar], - [# The POSIX 1988 'ustar' format is defined with fixed-size fields. - # There is notably a 21 bits limit for the UID and the GID. In fact, - # the 'pax' utility can hang on bigger UID/GID (see automake bug#8343 - # and bug#13588). - am_max_uid=2097151 # 2^21 - 1 - am_max_gid=$am_max_uid - # The $UID and $GID variables are not portable, so we need to resort - # to the POSIX-mandated id(1) utility. Errors in the 'id' calls - # below are definitely unexpected, so allow the users to see them - # (that is, avoid stderr redirection). - am_uid=`id -u || echo unknown` - am_gid=`id -g || echo unknown` - AC_MSG_CHECKING([whether UID '$am_uid' is supported by ustar format]) - if test $am_uid -le $am_max_uid; then - AC_MSG_RESULT([yes]) - else - AC_MSG_RESULT([no]) - _am_tools=none - fi - AC_MSG_CHECKING([whether GID '$am_gid' is supported by ustar format]) - if test $am_gid -le $am_max_gid; then - AC_MSG_RESULT([yes]) - else - AC_MSG_RESULT([no]) - _am_tools=none - fi], - - [pax], - [], - - [m4_fatal([Unknown tar format])]) - - AC_MSG_CHECKING([how to create a $1 tar archive]) - - # Go ahead even if we have the value already cached. We do so because we - # need to set the values for the 'am__tar' and 'am__untar' variables. - _am_tools=${am_cv_prog_tar_$1-$_am_tools} - - for _am_tool in $_am_tools; do - case $_am_tool in - gnutar) - for _am_tar in tar gnutar gtar; do - AM_RUN_LOG([$_am_tar --version]) && break - done - am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"' - am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"' - am__untar="$_am_tar -xf -" - ;; - plaintar) - # Must skip GNU tar: if it does not support --format= it doesn't create - # ustar tarball either. - (tar --version) >/dev/null 2>&1 && continue - am__tar='tar chf - "$$tardir"' - am__tar_='tar chf - "$tardir"' - am__untar='tar xf -' - ;; - pax) - am__tar='pax -L -x $1 -w "$$tardir"' - am__tar_='pax -L -x $1 -w "$tardir"' - am__untar='pax -r' - ;; - cpio) - am__tar='find "$$tardir" -print | cpio -o -H $1 -L' - am__tar_='find "$tardir" -print | cpio -o -H $1 -L' - am__untar='cpio -i -H $1 -d' - ;; - none) - am__tar=false - am__tar_=false - am__untar=false - ;; - esac - - # If the value was cached, stop now. We just wanted to have am__tar - # and am__untar set. - test -n "${am_cv_prog_tar_$1}" && break - - # tar/untar a dummy directory, and stop if the command works. - rm -rf conftest.dir - mkdir conftest.dir - echo GrepMe > conftest.dir/file - AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar]) - rm -rf conftest.dir - if test -s conftest.tar; then - AM_RUN_LOG([$am__untar /dev/null 2>&1 && break - fi - done - rm -rf conftest.dir - - AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool]) - AC_MSG_RESULT([$am_cv_prog_tar_$1])]) - -AC_SUBST([am__tar]) -AC_SUBST([am__untar]) -]) # _AM_PROG_TAR - -m4_include([scripts/libtool.m4]) -m4_include([scripts/ltoptions.m4]) -m4_include([scripts/ltsugar.m4]) -m4_include([scripts/ltversion.m4]) -m4_include([scripts/lt~obsolete.m4]) diff --git a/autogen.sh b/autogen.sh deleted file mode 100755 index a46daf65a..000000000 --- a/autogen.sh +++ /dev/null @@ -1,225 +0,0 @@ -#! /bin/sh -# -# Run 'autoreconf' to build 'configure', 'Makefile.in' and other configure -# control files. -# -# The first time this is run on a GIT checkout the only files that exist are -# configure.ac and Makefile.am; all of the autotools support scripts are -# missing. They are instantiated with autoreconf --force --install. -# -# For regular ("tarball") distributions all the files should exist. We do not -# want them to be updated *under any circumstances*. It should never be -# necessary to run autogen.sh because ./configure --enable-maintainer-mode says -# what to do if Makefile.am or configure.ac are changed. -# -# It is *probably* OK to update the files on a GIT checkout, because they have -# come from the local tools, but leave that to the user who is assumed to know -# whether it is ok or required. -# -# This script is intended to work without arguments, there are, however, hidden -# arguments (a) for use while testing the script and (b) to fix up systems that -# have been broken. If (b) is required the script prompts for the correct -# options. For this reason the options are *NOT* documented in the help; this -# is deliberate; UTSL. -# -clean= -maintainer= -while test $# -gt 0 -do - case "$1" in - --maintainer) - maintainer=1;; - - --clean) - clean=1;; - - *) - exec >&2 - echo "$0: usage: ./autogen.sh" - if test -d .git - then - echo " ./autogen.sh generates the configure script and" - echo " Makefile.in, or refreshes them after changes to Makefile.am" - echo " or configure.ac. You may prefer to just run autoreconf." - elif test -z "$maintainer" - then - echo " DO NOT RUN THIS SCRIPT." - echo " If you need to change Makefile.am or configure.ac then you" - echo " also need to run ./configure --enable-maintainer-mode and" - echo " use the appropriate autotools, *NOT* this script, to update" - echo " everything, please check the documentation of autoreconf." - echo " WARNING: libpng is intentionally generated with a known," - echo " fixed, set of autotools. It is known *NOT* to work with" - echo " the collection of autotools distributed on highly reputable" - echo " operating systems." - echo " Remember: autotools is GNU software, you are expected to" - echo " pay for support." - else - echo " You have run autogen.sh with --maintainer enabled and you" - echo " are not using a GIT distribution, then you have given an" - echo " unrecognized argument. This is not good. --maintainer" - echo " switches off any assumptions that you might not know what" - echo " you are doing." - fi - exit 1;; - esac - - shift -done -# -# First check for a set of the autotools files; if absent then this is assumed -# to be a GIT version and the local autotools must be used. If present this -# is a tarball distribution and the script should not be used. If partially -# present bad things are happening. -# -# The autotools generated files: -libpng_autotools_files="Makefile.in aclocal.m4 config.guess config.h.in - config.sub configure depcomp install-sh ltmain.sh missing\ - test-driver" -# -# Files generated by versions of configue >2.68 or automake >1.13 (i.e. later -# versions than those required by configure.ac): -libpng_autotools_extra="compile config.h.in~" -# -# These are separate because 'maintainer-clean' does not remove them. -libpng_libtool_files="scripts/libtool.m4 scripts/ltoptions.m4\ - scripts/ltsugar.m4 scripts/ltversion.m4 scripts/lt~obsolete.m4" - -libpng_autotools_dirs="autom4te.cache" # not required -# -# The configure generated files: -libpng_configure_files="Makefile config.h config.log config.status\ - libpng-config libpng.pc libtool stamp-h1" - -libpng_configure_dirs=".deps" -# -# We must remove the configure generated files as well as the autotools -# generated files if autotools are regenerated because otherwise if configure -# has been run without "--enable-maintainer-mode" make can do a partial update -# of Makefile. These functions do the two bits of cleaning. -clean_autotools(){ - rm -rf $libpng_autotools_files $libpng_libtool_files $libpng_autotools_dirs - rm -rf $libpng_autotools_extra -} - -clean_configure(){ - rm -rf $libpng_configure_files $libpng_configure_dirs -} -# -# Clean: remove everything (this is to help with testing) -if test -n "$clean" -then - clean_configure - if test -n "$maintainer" - then - clean_autotools - fi - - exit 0 -fi -# -# Validate the distribution. -libpng_autotools_file_found= -libpng_autotools_file_missing= -for file in $libpng_autotools_files -do - if test -f "$file" - then - libpng_autotools_file_found=1 - else - libpng_autotools_file_missing=1 - fi -done -# -# Presence of one of these does not *invalidate* missing, but absence -# invalidates found. -for file in $libpng_libtool_files -do - if test ! -f "$file" - then - libpng_autotools_file_missing=1 - fi -done -# -# The cache directory doesn't matter - it will be regenerated and does not exist -# anyway in a tarball. -# -# Either everything is missing or everything is there, the --maintainer option -# just changes this so that the mode is set to generate all the files. -mode= -if test -z "$libpng_autotools_file_found" -o -n "$maintainer" -then - mode="autoreconf" -else - if test -n "$libpng_autotools_file_missing" - then - mode="broken" - else - mode="configure" - fi -fi -# -# So: -case "$mode" in - autoreconf) - # Clean in case configure files exist - clean_configure - clean_autotools - # Everything must be initialized, so use --force - if autoreconf --warnings=all --force --install - then - missing= - for file in $libpng_autotools_files - do - test -f "$file" || missing=1 - done - # ignore the cache directory - test -z "$missing" || { - exec >&2 - echo "autoreconf was run, but did not produce all the expected" - echo "files. It is likely that your autotools installation is" - echo "not compatible with that expected by libpng." - exit 1 - } - else - exec >&2 - echo "autoreconf failed: your version of autotools is incompatible" - echo "with this libpng version. Please use a distributed archive" - echo "(which includes the autotools generated files) and run configure" - echo "instead." - exit 1 - fi;; - - configure) - if test -d .git - then - exec >&2 - echo "ERROR: running autoreconf on an initialized system" - echo " This is not necessary; it is only necessary to remake the" - echo " autotools generated files if Makefile.am or configure.ac" - echo " change and make does the right thing with:" - echo - echo " ./configure --enable-maintainer-mode." - echo - echo " You can run autoreconf yourself if you don't like maintainer" - echo " mode and you can also just run autoreconf -f -i to initialize" - echo " everything in the first place; this script is only for" - echo " compatibility with prior releases." - exit 1 - else - exec >&2 - echo "autogen.sh is intended only to generate 'configure' on systems" - echo "that do not have it. You have a complete 'configure', if you" - echo "need to change Makefile.am or configure.ac you also need to" - echo "run configure with the --enable-maintainer-mode option." - exit 1 - fi;; - - broken) - exec >&2 - echo "Your system has a partial set of autotools generated files." - echo "autogen.sh is unable to proceed. The full set of files is" - echo "contained in the libpng 'tar' distribution archive and you do" - echo "not need to run autogen.sh if you use it." - exit 1;; -esac diff --git a/ci/ci_autotools.sh b/ci/ci_autotools.sh deleted file mode 100755 index 14108da63..000000000 --- a/ci/ci_autotools.sh +++ /dev/null @@ -1,80 +0,0 @@ -#!/usr/bin/env bash -set -e - -# ci_autotools.sh -# Continuously integrate libpng using the GNU Autotools. -# -# Copyright (c) 2019-2020 Cosmin Truta. -# -# This software is released under the libpng license. -# For conditions of distribution and use, see the disclaimer -# and license in png.h. - -readonly CI_SCRIPTNAME="$(basename "$0")" -readonly CI_SCRIPTDIR="$(cd "$(dirname "$0")" && pwd)" -readonly CI_SRCDIR="$(dirname "$CI_SCRIPTDIR")" -readonly CI_BUILDDIR="$CI_SRCDIR/out/autotools.build" -readonly CI_INSTALLDIR="$CI_SRCDIR/out/autotools.install" - -function ci_info { - printf >&2 "%s: %s\\n" "$CI_SCRIPTNAME" "$*" -} - -function ci_err { - printf >&2 "%s: error: %s\\n" "$CI_SCRIPTNAME" "$*" - exit 2 -} - -function ci_spawn { - printf >&2 "%s: executing:" "$CI_SCRIPTNAME" - printf >&2 " %q" "$@" - printf >&2 "\\n" - "$@" -} - -function ci_init_autotools { - # Initialize the CI_ variables with default values, where applicable. - CI_MAKE="${CI_MAKE:-make}" - [[ $(uname -s || echo unknown) == Darwin ]] && CI_CC="${CI_CC:-clang}" - # Print the CI_ variables. - ci_info "source directory: $CI_SRCDIR" - ci_info "build directory: $CI_BUILDDIR" - ci_info "install directory: $CI_INSTALLDIR" - ci_info "environment option: \$CI_CONFIGURE_FLAGS='$CI_CONFIGURE_FLAGS'" - ci_info "environment option: \$CI_MAKE='$CI_MAKE'" - ci_info "environment option: \$CI_MAKE_FLAGS='$CI_MAKE_FLAGS'" - ci_info "environment option: \$CI_CC='$CI_CC'" - ci_info "environment option: \$CI_CC_FLAGS='$CI_CC_FLAGS'" - ci_info "environment option: \$CI_SANITIZERS='$CI_SANITIZERS'" - ci_info "environment option: \$CI_NO_TEST='$CI_NO_TEST'" - ci_info "environment option: \$CI_NO_INSTALL='$CI_NO_INSTALL'" - ci_info "environment option: \$CI_NO_CLEAN='$CI_NO_CLEAN'" - # Avoid using the CI_ variables that cannot be customized reliably. - [[ ! $CI_CONFIGURE_VARS ]] || ci_err "unexpected: \$CI_CONFIGURE_VARS='$CI_CONFIGURE_VARS'" - [[ ! $CI_MAKE_VARS ]] || ci_err "unexpected: \$CI_MAKE_VARS='$CI_MAKE_VARS'" -} - -function ci_build_autotools { - # Export the configure build environment. - [[ $CI_CC ]] && ci_spawn export CC="$CI_CC" - [[ $CI_CC_FLAGS ]] && ci_spawn export CFLAGS="$CI_CC_FLAGS" - [[ $CI_SANITIZERS ]] && ci_spawn export CFLAGS="-fsanitize=$CI_SANITIZERS -O2 $CFLAGS" - # Build and install. - ci_spawn rm -fr "$CI_BUILDDIR" "$CI_INSTALLDIR" - ci_spawn mkdir -p "$CI_BUILDDIR" - ci_spawn cd "$CI_BUILDDIR" - ci_spawn "$CI_SRCDIR/configure" --prefix="$CI_INSTALLDIR" $CI_CONFIGURE_FLAGS - ci_spawn "$CI_MAKE" $CI_MAKE_FLAGS - [[ $CI_NO_TEST ]] || ci_spawn "$CI_MAKE" $CI_MAKE_FLAGS test - [[ $CI_NO_INSTALL ]] || ci_spawn "$CI_MAKE" $CI_MAKE_FLAGS install - [[ $CI_NO_CLEAN ]] || ci_spawn "$CI_MAKE" $CI_MAKE_FLAGS clean - [[ $CI_NO_CLEAN ]] || ci_spawn "$CI_MAKE" $CI_MAKE_FLAGS distclean - ci_info "success!" -} - -ci_init_autotools -[[ ! $* ]] || { - ci_info "note: this program accepts environment options only" - ci_err "unexpected command arguments: '$*'" -} -ci_build_autotools diff --git a/ci/ci_cmake.sh b/ci/ci_cmake.sh deleted file mode 100755 index 0fec46012..000000000 --- a/ci/ci_cmake.sh +++ /dev/null @@ -1,114 +0,0 @@ -#!/usr/bin/env bash -set -e - -# ci_cmake.sh -# Continuously integrate libpng using CMake. -# -# Copyright (c) 2019-2020 Cosmin Truta. -# -# This software is released under the libpng license. -# For conditions of distribution and use, see the disclaimer -# and license in png.h. - -readonly CI_SCRIPTNAME="$(basename "$0")" -readonly CI_SCRIPTDIR="$(cd "$(dirname "$0")" && pwd)" -readonly CI_SRCDIR="$(dirname "$CI_SCRIPTDIR")" -readonly CI_BUILDDIR="$CI_SRCDIR/out/cmake.build" -readonly CI_INSTALLDIR="$CI_SRCDIR/out/cmake.install" - -function ci_info { - printf >&2 "%s: %s\\n" "$CI_SCRIPTNAME" "$*" -} - -function ci_err { - printf >&2 "%s: error: %s\\n" "$CI_SCRIPTNAME" "$*" - exit 2 -} - -function ci_spawn { - printf >&2 "%s: executing:" "$CI_SCRIPTNAME" - printf >&2 " %q" "$@" - printf >&2 "\\n" - "$@" -} - -function ci_init_cmake { - # Initialize the CI_ variables with default values, where applicable. - CI_CMAKE="${CI_CMAKE:-cmake}" - CI_CTEST="${CI_CTEST:-ctest}" - [[ $(uname -s || echo unknown) == Darwin ]] && CI_CC="${CI_CC:-clang}" - CI_CMAKE_BUILD_TYPE="${CI_CMAKE_BUILD_TYPE:-Release}" - # Print the CI_ variables. - ci_info "source directory: $CI_SRCDIR" - ci_info "build directory: $CI_BUILDDIR" - ci_info "install directory: $CI_INSTALLDIR" - ci_info "environment option: \$CI_CMAKE='$CI_CMAKE'" - ci_info "environment option: \$CI_CMAKE_GENERATOR='$CI_CMAKE_GENERATOR'" - ci_info "environment option: \$CI_CMAKE_GENERATOR_PLATFORM='$CI_CMAKE_GENERATOR_PLATFORM'" - ci_info "environment option: \$CI_CMAKE_BUILD_TYPE='$CI_CMAKE_BUILD_TYPE'" - ci_info "environment option: \$CI_CMAKE_BUILD_FLAGS='$CI_CMAKE_BUILD_FLAGS'" - ci_info "environment option: \$CI_CMAKE_VARS='$CI_CMAKE_VARS'" - ci_info "environment option: \$CI_CTEST='$CI_CTEST'" - ci_info "environment option: \$CI_CTEST_FLAGS='$CI_CTEST_FLAGS'" - ci_info "environment option: \$CI_CC='$CI_CC'" - ci_info "environment option: \$CI_CC_FLAGS='$CI_CC_FLAGS'" - ci_info "environment option: \$CI_SANITIZERS='$CI_SANITIZERS'" - ci_info "environment option: \$CI_NO_TEST='$CI_NO_TEST'" - ci_info "environment option: \$CI_NO_INSTALL='$CI_NO_INSTALL'" - ci_info "environment option: \$CI_NO_CLEAN='$CI_NO_CLEAN'" - # Print the CMake/CTest program versions. - ci_spawn "$(command -v "$CI_CMAKE")" --version - ci_spawn "$(command -v "$CI_CTEST")" --version -} - -function ci_build_cmake { - # Initialize ALL_CC_FLAGS as a string. - local ALL_CC_FLAGS="$CI_CC_FLAGS" - [[ $CI_SANITIZERS ]] && ALL_CC_FLAGS="-fsanitize=$CI_SANITIZERS $ALL_CC_FLAGS" - # Initialize ALL_CMAKE_VARS, ALL_CMAKE_BUILD_FLAGS and ALL_CTEST_FLAGS as arrays. - local -a ALL_CMAKE_VARS=() - [[ $CI_CC ]] && ALL_CMAKE_VARS+=(-DCMAKE_C_COMPILER="$CI_CC") - [[ $ALL_CC_FLAGS ]] && ALL_CMAKE_VARS+=(-DCMAKE_C_FLAGS="$ALL_CC_FLAGS") - ALL_CMAKE_VARS+=(-DCMAKE_BUILD_TYPE="$CI_CMAKE_BUILD_TYPE") - ALL_CMAKE_VARS+=(-DCMAKE_INSTALL_PREFIX="$CI_INSTALLDIR") - ALL_CMAKE_VARS+=(-DCMAKE_VERBOSE_MAKEFILE=ON) - [[ $CI_NO_TEST ]] && ALL_CMAKE_VARS+=(-DPNG_TESTS=OFF) - ALL_CMAKE_VARS+=($CI_CMAKE_VARS) - local -a ALL_CMAKE_BUILD_FLAGS=($CI_CMAKE_BUILD_FLAGS) - local -a ALL_CTEST_FLAGS=($CI_CTEST_FLAGS) - # Export the CMake build environment. - [[ $CI_CMAKE_GENERATOR ]] && - ci_spawn export CMAKE_GENERATOR="$CI_CMAKE_GENERATOR" - [[ $CI_CMAKE_GENERATOR_PLATFORM ]] && - ci_spawn export CMAKE_GENERATOR_PLATFORM="$CI_CMAKE_GENERATOR_PLATFORM" - # Build and install. - ci_spawn "$CI_CMAKE" -E remove_directory "$CI_BUILDDIR" - ci_spawn "$CI_CMAKE" -E remove_directory "$CI_INSTALLDIR" - ci_spawn "$CI_CMAKE" -E make_directory "$CI_BUILDDIR" - ci_spawn cd "$CI_BUILDDIR" - ci_spawn "$CI_CMAKE" "${ALL_CMAKE_VARS[@]}" "$CI_SRCDIR" - ci_spawn "$CI_CMAKE" --build . \ - --config "$CI_CMAKE_BUILD_TYPE" \ - "${ALL_CMAKE_BUILD_FLAGS[@]}" - [[ $CI_NO_TEST ]] || - ci_spawn "$CI_CTEST" --build-config "$CI_CMAKE_BUILD_TYPE" \ - "${ALL_CTEST_FLAGS[@]}" - [[ $CI_NO_INSTALL ]] || - ci_spawn "$CI_CMAKE" --build . \ - --config "$CI_CMAKE_BUILD_TYPE" \ - --target install \ - "${ALL_CMAKE_BUILD_FLAGS[@]}" - [[ $CI_NO_CLEAN ]] || - ci_spawn "$CI_CMAKE" --build . \ - --config "$CI_CMAKE_BUILD_TYPE" \ - --target clean \ - "${ALL_CMAKE_BUILD_FLAGS[@]}" - ci_info "success!" -} - -ci_init_cmake -[[ ! $* ]] || { - ci_info "note: this program accepts environment options only" - ci_err "unexpected command arguments: '$*'" -} -ci_build_cmake diff --git a/ci/ci_legacy.sh b/ci/ci_legacy.sh deleted file mode 100755 index a933894a6..000000000 --- a/ci/ci_legacy.sh +++ /dev/null @@ -1,100 +0,0 @@ -#!/usr/bin/env bash -set -e - -# ci_legacy.sh -# Continuously integrate libpng using the legacy makefiles. -# -# Copyright (c) 2019-2020 Cosmin Truta. -# -# This software is released under the libpng license. -# For conditions of distribution and use, see the disclaimer -# and license in png.h. - -readonly CI_SCRIPTNAME="$(basename "$0")" -readonly CI_SCRIPTDIR="$(cd "$(dirname "$0")" && pwd)" -readonly CI_SRCDIR="$(dirname "$CI_SCRIPTDIR")" -readonly CI_BUILDDIR="$CI_SRCDIR" - -function ci_info { - printf >&2 "%s: %s\\n" "$CI_SCRIPTNAME" "$*" -} - -function ci_err { - printf >&2 "%s: error: %s\\n" "$CI_SCRIPTNAME" "$*" - exit 2 -} - -function ci_spawn { - printf >&2 "%s: executing:" "$CI_SCRIPTNAME" - printf >&2 " %q" "$@" - printf >&2 "\\n" - "$@" -} - -function ci_init_legacy { - # Initialize the CI_ variables with default values, where applicable. - CI_MAKE="${CI_MAKE:-make}" - [[ $(uname -s || echo unknown) == Darwin ]] && CI_CC="${CI_CC:-clang}" - [[ $CI_CC == *clang* ]] && - CI_LEGACY_MAKEFILES="${CI_LEGACY_MAKEFILES:-scripts/makefile.clang}" - CI_LEGACY_MAKEFILES="${CI_LEGACY_MAKEFILES:-scripts/makefile.gcc}" - CI_LD="${CI_LD:-$CI_CC}" - CI_LIBS="${CI_LIBS:--lz -lm}" - # Print the CI_ variables. - ci_info "source directory: $CI_SRCDIR" - ci_info "build directory: $CI_BUILDDIR" - ci_info "environment option: \$CI_LEGACY_MAKEFILES='$CI_LEGACY_MAKEFILES'" - ci_info "environment option: \$CI_MAKE='$CI_MAKE'" - ci_info "environment option: \$CI_MAKE_FLAGS='$CI_MAKE_FLAGS'" - ci_info "environment option: \$CI_MAKE_VARS='$CI_MAKE_VARS'" - ci_info "environment option: \$CI_CC='$CI_CC'" - ci_info "environment option: \$CI_CC_FLAGS='$CI_CC_FLAGS'" - ci_info "environment option: \$CI_CPP='$CI_CPP'" - ci_info "environment option: \$CI_CPP_FLAGS='$CI_CPP_FLAGS'" - ci_info "environment option: \$CI_LD='$CI_LD'" - ci_info "environment option: \$CI_LD_FLAGS='$CI_LD_FLAGS'" - ci_info "environment option: \$CI_LIBS='$CI_LIBS'" - ci_info "environment option: \$CI_SANITIZERS='$CI_SANITIZERS'" - ci_info "environment option: \$CI_NO_TEST='$CI_NO_TEST'" - ci_info "environment option: \$CI_NO_CLEAN='$CI_NO_CLEAN'" -} - -function ci_build_legacy { - # Initialize ALL_CC_FLAGS and ALL_LD_FLAGS as strings. - local ALL_CC_FLAGS="$CI_CC_FLAGS" - local ALL_LD_FLAGS="$CI_LD_FLAGS" - [[ $CI_SANITIZERS ]] && { - ALL_CC_FLAGS="-fsanitize=$CI_SANITIZERS -O2 $ALL_CC_FLAGS" - ALL_LD_FLAGS="-fsanitize=$CI_SANITIZERS $ALL_LD_FLAGS" - } - # Initialize ALL_MAKE_ARGS as an array; - # expand CI_MAKE_FLAGS at the beginning and CI_MAKE_VARS at the end. - local -a ALL_MAKE_ARGS=() - ALL_MAKE_ARGS+=($CI_MAKE_FLAGS) - [[ $CI_CC ]] && ALL_MAKE_ARGS+=("CC=$CI_CC") - [[ $ALL_CC_FLAGS ]] && ALL_MAKE_ARGS+=("CFLAGS=$ALL_CC_FLAGS") - [[ $CI_CPP ]] && ALL_MAKE_ARGS+=("CPP=$CI_CPP") - [[ $CI_CPP_FLAGS ]] && ALL_MAKE_ARGS+=("CPPFLAGS=$CI_CPP_FLAGS") - [[ $CI_LD ]] && ALL_MAKE_ARGS+=("LD=$CI_LD") - [[ $ALL_LD_FLAGS ]] && ALL_MAKE_ARGS+=("LDFLAGS=$ALL_LD_FLAGS") - ALL_MAKE_ARGS+=("LIBS=$CI_LIBS") - ALL_MAKE_ARGS+=($CI_MAKE_VARS) - # Build! - ci_spawn cd "$CI_SRCDIR" - local MY_MAKEFILE - for MY_MAKEFILE in $CI_LEGACY_MAKEFILES - do - ci_info "using makefile: $MY_MAKEFILE" - ci_spawn "$CI_MAKE" "${ALL_MAKE_ARGS[@]}" -f $MY_MAKEFILE - [[ $CI_NO_TEST ]] || ci_spawn "$CI_MAKE" "${ALL_MAKE_ARGS[@]}" -f $MY_MAKEFILE test - [[ $CI_NO_CLEAN ]] || ci_spawn "$CI_MAKE" "${ALL_MAKE_ARGS[@]}" -f $MY_MAKEFILE clean - done - ci_info "success!" -} - -ci_init_legacy -[[ ! $* ]] || { - ci_info "note: this program accepts environment options only" - ci_err "unexpected command arguments: '$*'" -} -ci_build_legacy diff --git a/compile b/compile deleted file mode 100755 index 99e50524b..000000000 --- a/compile +++ /dev/null @@ -1,348 +0,0 @@ -#! /bin/sh -# Wrapper for compilers which do not understand '-c -o'. - -scriptversion=2018-03-07.03; # UTC - -# Copyright (C) 1999-2018 Free Software Foundation, Inc. -# Written by Tom Tromey . -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2, or (at your option) -# any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program. If not, see . - -# As a special exception to the GNU General Public License, if you -# distribute this file as part of a program that contains a -# configuration script generated by Autoconf, you may include it under -# the same distribution terms that you use for the rest of that program. - -# This file is maintained in Automake, please report -# bugs to or send patches to -# . - -nl=' -' - -# We need space, tab and new line, in precisely that order. Quoting is -# there to prevent tools from complaining about whitespace usage. -IFS=" "" $nl" - -file_conv= - -# func_file_conv build_file lazy -# Convert a $build file to $host form and store it in $file -# Currently only supports Windows hosts. If the determined conversion -# type is listed in (the comma separated) LAZY, no conversion will -# take place. -func_file_conv () -{ - file=$1 - case $file in - / | /[!/]*) # absolute file, and not a UNC file - if test -z "$file_conv"; then - # lazily determine how to convert abs files - case `uname -s` in - MINGW*) - file_conv=mingw - ;; - CYGWIN*) - file_conv=cygwin - ;; - *) - file_conv=wine - ;; - esac - fi - case $file_conv/,$2, in - *,$file_conv,*) - ;; - mingw/*) - file=`cmd //C echo "$file " | sed -e 's/"\(.*\) " *$/\1/'` - ;; - cygwin/*) - file=`cygpath -m "$file" || echo "$file"` - ;; - wine/*) - file=`winepath -w "$file" || echo "$file"` - ;; - esac - ;; - esac -} - -# func_cl_dashL linkdir -# Make cl look for libraries in LINKDIR -func_cl_dashL () -{ - func_file_conv "$1" - if test -z "$lib_path"; then - lib_path=$file - else - lib_path="$lib_path;$file" - fi - linker_opts="$linker_opts -LIBPATH:$file" -} - -# func_cl_dashl library -# Do a library search-path lookup for cl -func_cl_dashl () -{ - lib=$1 - found=no - save_IFS=$IFS - IFS=';' - for dir in $lib_path $LIB - do - IFS=$save_IFS - if $shared && test -f "$dir/$lib.dll.lib"; then - found=yes - lib=$dir/$lib.dll.lib - break - fi - if test -f "$dir/$lib.lib"; then - found=yes - lib=$dir/$lib.lib - break - fi - if test -f "$dir/lib$lib.a"; then - found=yes - lib=$dir/lib$lib.a - break - fi - done - IFS=$save_IFS - - if test "$found" != yes; then - lib=$lib.lib - fi -} - -# func_cl_wrapper cl arg... -# Adjust compile command to suit cl -func_cl_wrapper () -{ - # Assume a capable shell - lib_path= - shared=: - linker_opts= - for arg - do - if test -n "$eat"; then - eat= - else - case $1 in - -o) - # configure might choose to run compile as 'compile cc -o foo foo.c'. - eat=1 - case $2 in - *.o | *.[oO][bB][jJ]) - func_file_conv "$2" - set x "$@" -Fo"$file" - shift - ;; - *) - func_file_conv "$2" - set x "$@" -Fe"$file" - shift - ;; - esac - ;; - -I) - eat=1 - func_file_conv "$2" mingw - set x "$@" -I"$file" - shift - ;; - -I*) - func_file_conv "${1#-I}" mingw - set x "$@" -I"$file" - shift - ;; - -l) - eat=1 - func_cl_dashl "$2" - set x "$@" "$lib" - shift - ;; - -l*) - func_cl_dashl "${1#-l}" - set x "$@" "$lib" - shift - ;; - -L) - eat=1 - func_cl_dashL "$2" - ;; - -L*) - func_cl_dashL "${1#-L}" - ;; - -static) - shared=false - ;; - -Wl,*) - arg=${1#-Wl,} - save_ifs="$IFS"; IFS=',' - for flag in $arg; do - IFS="$save_ifs" - linker_opts="$linker_opts $flag" - done - IFS="$save_ifs" - ;; - -Xlinker) - eat=1 - linker_opts="$linker_opts $2" - ;; - -*) - set x "$@" "$1" - shift - ;; - *.cc | *.CC | *.cxx | *.CXX | *.[cC]++) - func_file_conv "$1" - set x "$@" -Tp"$file" - shift - ;; - *.c | *.cpp | *.CPP | *.lib | *.LIB | *.Lib | *.OBJ | *.obj | *.[oO]) - func_file_conv "$1" mingw - set x "$@" "$file" - shift - ;; - *) - set x "$@" "$1" - shift - ;; - esac - fi - shift - done - if test -n "$linker_opts"; then - linker_opts="-link$linker_opts" - fi - exec "$@" $linker_opts - exit 1 -} - -eat= - -case $1 in - '') - echo "$0: No command. Try '$0 --help' for more information." 1>&2 - exit 1; - ;; - -h | --h*) - cat <<\EOF -Usage: compile [--help] [--version] PROGRAM [ARGS] - -Wrapper for compilers which do not understand '-c -o'. -Remove '-o dest.o' from ARGS, run PROGRAM with the remaining -arguments, and rename the output as expected. - -If you are trying to build a whole package this is not the -right script to run: please start by reading the file 'INSTALL'. - -Report bugs to . -EOF - exit $? - ;; - -v | --v*) - echo "compile $scriptversion" - exit $? - ;; - cl | *[/\\]cl | cl.exe | *[/\\]cl.exe | \ - icl | *[/\\]icl | icl.exe | *[/\\]icl.exe ) - func_cl_wrapper "$@" # Doesn't return... - ;; -esac - -ofile= -cfile= - -for arg -do - if test -n "$eat"; then - eat= - else - case $1 in - -o) - # configure might choose to run compile as 'compile cc -o foo foo.c'. - # So we strip '-o arg' only if arg is an object. - eat=1 - case $2 in - *.o | *.obj) - ofile=$2 - ;; - *) - set x "$@" -o "$2" - shift - ;; - esac - ;; - *.c) - cfile=$1 - set x "$@" "$1" - shift - ;; - *) - set x "$@" "$1" - shift - ;; - esac - fi - shift -done - -if test -z "$ofile" || test -z "$cfile"; then - # If no '-o' option was seen then we might have been invoked from a - # pattern rule where we don't need one. That is ok -- this is a - # normal compilation that the losing compiler can handle. If no - # '.c' file was seen then we are probably linking. That is also - # ok. - exec "$@" -fi - -# Name of file we expect compiler to create. -cofile=`echo "$cfile" | sed 's|^.*[\\/]||; s|^[a-zA-Z]:||; s/\.c$/.o/'` - -# Create the lock directory. -# Note: use '[/\\:.-]' here to ensure that we don't use the same name -# that we are using for the .o file. Also, base the name on the expected -# object file name, since that is what matters with a parallel build. -lockdir=`echo "$cofile" | sed -e 's|[/\\:.-]|_|g'`.d -while true; do - if mkdir "$lockdir" >/dev/null 2>&1; then - break - fi - sleep 1 -done -# FIXME: race condition here if user kills between mkdir and trap. -trap "rmdir '$lockdir'; exit 1" 1 2 15 - -# Run the compile. -"$@" -ret=$? - -if test -f "$cofile"; then - test "$cofile" = "$ofile" || mv "$cofile" "$ofile" -elif test -f "${cofile}bj"; then - test "${cofile}bj" = "$ofile" || mv "${cofile}bj" "$ofile" -fi - -rmdir "$lockdir" -exit $ret - -# Local Variables: -# mode: shell-script -# sh-indentation: 2 -# eval: (add-hook 'before-save-hook 'time-stamp) -# time-stamp-start: "scriptversion=" -# time-stamp-format: "%:y-%02m-%02d.%02H" -# time-stamp-time-zone: "UTC0" -# time-stamp-end: "; # UTC" -# End: diff --git a/config.guess b/config.guess deleted file mode 100755 index 256083a70..000000000 --- a/config.guess +++ /dev/null @@ -1,1476 +0,0 @@ -#! /bin/sh -# Attempt to guess a canonical system name. -# Copyright 1992-2018 Free Software Foundation, Inc. - -timestamp='2018-03-08' - -# This file is free software; you can redistribute it and/or modify it -# under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 3 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, but -# WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -# General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, see . -# -# As a special exception to the GNU General Public License, if you -# distribute this file as part of a program that contains a -# configuration script generated by Autoconf, you may include it under -# the same distribution terms that you use for the rest of that -# program. This Exception is an additional permission under section 7 -# of the GNU General Public License, version 3 ("GPLv3"). -# -# Originally written by Per Bothner; maintained since 2000 by Ben Elliston. -# -# You can get the latest version of this script from: -# https://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess -# -# Please send patches to . - - -me=`echo "$0" | sed -e 's,.*/,,'` - -usage="\ -Usage: $0 [OPTION] - -Output the configuration name of the system \`$me' is run on. - -Options: - -h, --help print this help, then exit - -t, --time-stamp print date of last modification, then exit - -v, --version print version number, then exit - -Report bugs and patches to ." - -version="\ -GNU config.guess ($timestamp) - -Originally written by Per Bothner. -Copyright 1992-2018 Free Software Foundation, Inc. - -This is free software; see the source for copying conditions. There is NO -warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." - -help=" -Try \`$me --help' for more information." - -# Parse command line -while test $# -gt 0 ; do - case $1 in - --time-stamp | --time* | -t ) - echo "$timestamp" ; exit ;; - --version | -v ) - echo "$version" ; exit ;; - --help | --h* | -h ) - echo "$usage"; exit ;; - -- ) # Stop option processing - shift; break ;; - - ) # Use stdin as input. - break ;; - -* ) - echo "$me: invalid option $1$help" >&2 - exit 1 ;; - * ) - break ;; - esac -done - -if test $# != 0; then - echo "$me: too many arguments$help" >&2 - exit 1 -fi - -trap 'exit 1' 1 2 15 - -# CC_FOR_BUILD -- compiler used by this script. Note that the use of a -# compiler to aid in system detection is discouraged as it requires -# temporary files to be created and, as you can see below, it is a -# headache to deal with in a portable fashion. - -# Historically, `CC_FOR_BUILD' used to be named `HOST_CC'. We still -# use `HOST_CC' if defined, but it is deprecated. - -# Portable tmp directory creation inspired by the Autoconf team. - -set_cc_for_build=' -trap "exitcode=\$?; (rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null) && exit \$exitcode" 0 ; -trap "rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null; exit 1" 1 2 13 15 ; -: ${TMPDIR=/tmp} ; - { tmp=`(umask 077 && mktemp -d "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } || - { test -n "$RANDOM" && tmp=$TMPDIR/cg$$-$RANDOM && (umask 077 && mkdir $tmp) ; } || - { tmp=$TMPDIR/cg-$$ && (umask 077 && mkdir $tmp) && echo "Warning: creating insecure temp directory" >&2 ; } || - { echo "$me: cannot create a temporary directory in $TMPDIR" >&2 ; exit 1 ; } ; -dummy=$tmp/dummy ; -tmpfiles="$dummy.c $dummy.o $dummy.rel $dummy" ; -case $CC_FOR_BUILD,$HOST_CC,$CC in - ,,) echo "int x;" > "$dummy.c" ; - for c in cc gcc c89 c99 ; do - if ($c -c -o "$dummy.o" "$dummy.c") >/dev/null 2>&1 ; then - CC_FOR_BUILD="$c"; break ; - fi ; - done ; - if test x"$CC_FOR_BUILD" = x ; then - CC_FOR_BUILD=no_compiler_found ; - fi - ;; - ,,*) CC_FOR_BUILD=$CC ;; - ,*,*) CC_FOR_BUILD=$HOST_CC ;; -esac ; set_cc_for_build= ;' - -# This is needed to find uname on a Pyramid OSx when run in the BSD universe. -# (ghazi@noc.rutgers.edu 1994-08-24) -if (test -f /.attbin/uname) >/dev/null 2>&1 ; then - PATH=$PATH:/.attbin ; export PATH -fi - -UNAME_MACHINE=`(uname -m) 2>/dev/null` || UNAME_MACHINE=unknown -UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown -UNAME_SYSTEM=`(uname -s) 2>/dev/null` || UNAME_SYSTEM=unknown -UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown - -case "$UNAME_SYSTEM" in -Linux|GNU|GNU/*) - # If the system lacks a compiler, then just pick glibc. - # We could probably try harder. - LIBC=gnu - - eval "$set_cc_for_build" - cat <<-EOF > "$dummy.c" - #include - #if defined(__UCLIBC__) - LIBC=uclibc - #elif defined(__dietlibc__) - LIBC=dietlibc - #else - LIBC=gnu - #endif - EOF - eval "`$CC_FOR_BUILD -E "$dummy.c" 2>/dev/null | grep '^LIBC' | sed 's, ,,g'`" - - # If ldd exists, use it to detect musl libc. - if command -v ldd >/dev/null && \ - ldd --version 2>&1 | grep -q ^musl - then - LIBC=musl - fi - ;; -esac - -# Note: order is significant - the case branches are not exclusive. - -case "$UNAME_MACHINE:$UNAME_SYSTEM:$UNAME_RELEASE:$UNAME_VERSION" in - *:NetBSD:*:*) - # NetBSD (nbsd) targets should (where applicable) match one or - # more of the tuples: *-*-netbsdelf*, *-*-netbsdaout*, - # *-*-netbsdecoff* and *-*-netbsd*. For targets that recently - # switched to ELF, *-*-netbsd* would select the old - # object file format. This provides both forward - # compatibility and a consistent mechanism for selecting the - # object file format. - # - # Note: NetBSD doesn't particularly care about the vendor - # portion of the name. We always set it to "unknown". - sysctl="sysctl -n hw.machine_arch" - UNAME_MACHINE_ARCH=`(uname -p 2>/dev/null || \ - "/sbin/$sysctl" 2>/dev/null || \ - "/usr/sbin/$sysctl" 2>/dev/null || \ - echo unknown)` - case "$UNAME_MACHINE_ARCH" in - armeb) machine=armeb-unknown ;; - arm*) machine=arm-unknown ;; - sh3el) machine=shl-unknown ;; - sh3eb) machine=sh-unknown ;; - sh5el) machine=sh5le-unknown ;; - earmv*) - arch=`echo "$UNAME_MACHINE_ARCH" | sed -e 's,^e\(armv[0-9]\).*$,\1,'` - endian=`echo "$UNAME_MACHINE_ARCH" | sed -ne 's,^.*\(eb\)$,\1,p'` - machine="${arch}${endian}"-unknown - ;; - *) machine="$UNAME_MACHINE_ARCH"-unknown ;; - esac - # The Operating System including object format, if it has switched - # to ELF recently (or will in the future) and ABI. - case "$UNAME_MACHINE_ARCH" in - earm*) - os=netbsdelf - ;; - arm*|i386|m68k|ns32k|sh3*|sparc|vax) - eval "$set_cc_for_build" - if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \ - | grep -q __ELF__ - then - # Once all utilities can be ECOFF (netbsdecoff) or a.out (netbsdaout). - # Return netbsd for either. FIX? - os=netbsd - else - os=netbsdelf - fi - ;; - *) - os=netbsd - ;; - esac - # Determine ABI tags. - case "$UNAME_MACHINE_ARCH" in - earm*) - expr='s/^earmv[0-9]/-eabi/;s/eb$//' - abi=`echo "$UNAME_MACHINE_ARCH" | sed -e "$expr"` - ;; - esac - # The OS release - # Debian GNU/NetBSD machines have a different userland, and - # thus, need a distinct triplet. However, they do not need - # kernel version information, so it can be replaced with a - # suitable tag, in the style of linux-gnu. - case "$UNAME_VERSION" in - Debian*) - release='-gnu' - ;; - *) - release=`echo "$UNAME_RELEASE" | sed -e 's/[-_].*//' | cut -d. -f1,2` - ;; - esac - # Since CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM: - # contains redundant information, the shorter form: - # CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used. - echo "$machine-${os}${release}${abi}" - exit ;; - *:Bitrig:*:*) - UNAME_MACHINE_ARCH=`arch | sed 's/Bitrig.//'` - echo "$UNAME_MACHINE_ARCH"-unknown-bitrig"$UNAME_RELEASE" - exit ;; - *:OpenBSD:*:*) - UNAME_MACHINE_ARCH=`arch | sed 's/OpenBSD.//'` - echo "$UNAME_MACHINE_ARCH"-unknown-openbsd"$UNAME_RELEASE" - exit ;; - *:LibertyBSD:*:*) - UNAME_MACHINE_ARCH=`arch | sed 's/^.*BSD\.//'` - echo "$UNAME_MACHINE_ARCH"-unknown-libertybsd"$UNAME_RELEASE" - exit ;; - *:MidnightBSD:*:*) - echo "$UNAME_MACHINE"-unknown-midnightbsd"$UNAME_RELEASE" - exit ;; - *:ekkoBSD:*:*) - echo "$UNAME_MACHINE"-unknown-ekkobsd"$UNAME_RELEASE" - exit ;; - *:SolidBSD:*:*) - echo "$UNAME_MACHINE"-unknown-solidbsd"$UNAME_RELEASE" - exit ;; - macppc:MirBSD:*:*) - echo powerpc-unknown-mirbsd"$UNAME_RELEASE" - exit ;; - *:MirBSD:*:*) - echo "$UNAME_MACHINE"-unknown-mirbsd"$UNAME_RELEASE" - exit ;; - *:Sortix:*:*) - echo "$UNAME_MACHINE"-unknown-sortix - exit ;; - *:Redox:*:*) - echo "$UNAME_MACHINE"-unknown-redox - exit ;; - mips:OSF1:*.*) - echo mips-dec-osf1 - exit ;; - alpha:OSF1:*:*) - case $UNAME_RELEASE in - *4.0) - UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'` - ;; - *5.*) - UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $4}'` - ;; - esac - # According to Compaq, /usr/sbin/psrinfo has been available on - # OSF/1 and Tru64 systems produced since 1995. I hope that - # covers most systems running today. This code pipes the CPU - # types through head -n 1, so we only detect the type of CPU 0. - ALPHA_CPU_TYPE=`/usr/sbin/psrinfo -v | sed -n -e 's/^ The alpha \(.*\) processor.*$/\1/p' | head -n 1` - case "$ALPHA_CPU_TYPE" in - "EV4 (21064)") - UNAME_MACHINE=alpha ;; - "EV4.5 (21064)") - UNAME_MACHINE=alpha ;; - "LCA4 (21066/21068)") - UNAME_MACHINE=alpha ;; - "EV5 (21164)") - UNAME_MACHINE=alphaev5 ;; - "EV5.6 (21164A)") - UNAME_MACHINE=alphaev56 ;; - "EV5.6 (21164PC)") - UNAME_MACHINE=alphapca56 ;; - "EV5.7 (21164PC)") - UNAME_MACHINE=alphapca57 ;; - "EV6 (21264)") - UNAME_MACHINE=alphaev6 ;; - "EV6.7 (21264A)") - UNAME_MACHINE=alphaev67 ;; - "EV6.8CB (21264C)") - UNAME_MACHINE=alphaev68 ;; - "EV6.8AL (21264B)") - UNAME_MACHINE=alphaev68 ;; - "EV6.8CX (21264D)") - UNAME_MACHINE=alphaev68 ;; - "EV6.9A (21264/EV69A)") - UNAME_MACHINE=alphaev69 ;; - "EV7 (21364)") - UNAME_MACHINE=alphaev7 ;; - "EV7.9 (21364A)") - UNAME_MACHINE=alphaev79 ;; - esac - # A Pn.n version is a patched version. - # A Vn.n version is a released version. - # A Tn.n version is a released field test version. - # A Xn.n version is an unreleased experimental baselevel. - # 1.2 uses "1.2" for uname -r. - echo "$UNAME_MACHINE"-dec-osf"`echo "$UNAME_RELEASE" | sed -e 's/^[PVTX]//' | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz`" - # Reset EXIT trap before exiting to avoid spurious non-zero exit code. - exitcode=$? - trap '' 0 - exit $exitcode ;; - Amiga*:UNIX_System_V:4.0:*) - echo m68k-unknown-sysv4 - exit ;; - *:[Aa]miga[Oo][Ss]:*:*) - echo "$UNAME_MACHINE"-unknown-amigaos - exit ;; - *:[Mm]orph[Oo][Ss]:*:*) - echo "$UNAME_MACHINE"-unknown-morphos - exit ;; - *:OS/390:*:*) - echo i370-ibm-openedition - exit ;; - *:z/VM:*:*) - echo s390-ibm-zvmoe - exit ;; - *:OS400:*:*) - echo powerpc-ibm-os400 - exit ;; - arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*) - echo arm-acorn-riscix"$UNAME_RELEASE" - exit ;; - arm*:riscos:*:*|arm*:RISCOS:*:*) - echo arm-unknown-riscos - exit ;; - SR2?01:HI-UX/MPP:*:* | SR8000:HI-UX/MPP:*:*) - echo hppa1.1-hitachi-hiuxmpp - exit ;; - Pyramid*:OSx*:*:* | MIS*:OSx*:*:* | MIS*:SMP_DC-OSx*:*:*) - # akee@wpdis03.wpafb.af.mil (Earle F. Ake) contributed MIS and NILE. - if test "`(/bin/universe) 2>/dev/null`" = att ; then - echo pyramid-pyramid-sysv3 - else - echo pyramid-pyramid-bsd - fi - exit ;; - NILE*:*:*:dcosx) - echo pyramid-pyramid-svr4 - exit ;; - DRS?6000:unix:4.0:6*) - echo sparc-icl-nx6 - exit ;; - DRS?6000:UNIX_SV:4.2*:7* | DRS?6000:isis:4.2*:7*) - case `/usr/bin/uname -p` in - sparc) echo sparc-icl-nx7; exit ;; - esac ;; - s390x:SunOS:*:*) - echo "$UNAME_MACHINE"-ibm-solaris2"`echo "$UNAME_RELEASE" | sed -e 's/[^.]*//'`" - exit ;; - sun4H:SunOS:5.*:*) - echo sparc-hal-solaris2"`echo "$UNAME_RELEASE"|sed -e 's/[^.]*//'`" - exit ;; - sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*) - echo sparc-sun-solaris2"`echo "$UNAME_RELEASE" | sed -e 's/[^.]*//'`" - exit ;; - i86pc:AuroraUX:5.*:* | i86xen:AuroraUX:5.*:*) - echo i386-pc-auroraux"$UNAME_RELEASE" - exit ;; - i86pc:SunOS:5.*:* | i86xen:SunOS:5.*:*) - eval "$set_cc_for_build" - SUN_ARCH=i386 - # If there is a compiler, see if it is configured for 64-bit objects. - # Note that the Sun cc does not turn __LP64__ into 1 like gcc does. - # This test works for both compilers. - if [ "$CC_FOR_BUILD" != no_compiler_found ]; then - if (echo '#ifdef __amd64'; echo IS_64BIT_ARCH; echo '#endif') | \ - (CCOPTS="" $CC_FOR_BUILD -E - 2>/dev/null) | \ - grep IS_64BIT_ARCH >/dev/null - then - SUN_ARCH=x86_64 - fi - fi - echo "$SUN_ARCH"-pc-solaris2"`echo "$UNAME_RELEASE"|sed -e 's/[^.]*//'`" - exit ;; - sun4*:SunOS:6*:*) - # According to config.sub, this is the proper way to canonicalize - # SunOS6. Hard to guess exactly what SunOS6 will be like, but - # it's likely to be more like Solaris than SunOS4. - echo sparc-sun-solaris3"`echo "$UNAME_RELEASE"|sed -e 's/[^.]*//'`" - exit ;; - sun4*:SunOS:*:*) - case "`/usr/bin/arch -k`" in - Series*|S4*) - UNAME_RELEASE=`uname -v` - ;; - esac - # Japanese Language versions have a version number like `4.1.3-JL'. - echo sparc-sun-sunos"`echo "$UNAME_RELEASE"|sed -e 's/-/_/'`" - exit ;; - sun3*:SunOS:*:*) - echo m68k-sun-sunos"$UNAME_RELEASE" - exit ;; - sun*:*:4.2BSD:*) - UNAME_RELEASE=`(sed 1q /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null` - test "x$UNAME_RELEASE" = x && UNAME_RELEASE=3 - case "`/bin/arch`" in - sun3) - echo m68k-sun-sunos"$UNAME_RELEASE" - ;; - sun4) - echo sparc-sun-sunos"$UNAME_RELEASE" - ;; - esac - exit ;; - aushp:SunOS:*:*) - echo sparc-auspex-sunos"$UNAME_RELEASE" - exit ;; - # The situation for MiNT is a little confusing. The machine name - # can be virtually everything (everything which is not - # "atarist" or "atariste" at least should have a processor - # > m68000). The system name ranges from "MiNT" over "FreeMiNT" - # to the lowercase version "mint" (or "freemint"). Finally - # the system name "TOS" denotes a system which is actually not - # MiNT. But MiNT is downward compatible to TOS, so this should - # be no problem. - atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*) - echo m68k-atari-mint"$UNAME_RELEASE" - exit ;; - atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*) - echo m68k-atari-mint"$UNAME_RELEASE" - exit ;; - *falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*) - echo m68k-atari-mint"$UNAME_RELEASE" - exit ;; - milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*) - echo m68k-milan-mint"$UNAME_RELEASE" - exit ;; - hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*) - echo m68k-hades-mint"$UNAME_RELEASE" - exit ;; - *:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*) - echo m68k-unknown-mint"$UNAME_RELEASE" - exit ;; - m68k:machten:*:*) - echo m68k-apple-machten"$UNAME_RELEASE" - exit ;; - powerpc:machten:*:*) - echo powerpc-apple-machten"$UNAME_RELEASE" - exit ;; - RISC*:Mach:*:*) - echo mips-dec-mach_bsd4.3 - exit ;; - RISC*:ULTRIX:*:*) - echo mips-dec-ultrix"$UNAME_RELEASE" - exit ;; - VAX*:ULTRIX*:*:*) - echo vax-dec-ultrix"$UNAME_RELEASE" - exit ;; - 2020:CLIX:*:* | 2430:CLIX:*:*) - echo clipper-intergraph-clix"$UNAME_RELEASE" - exit ;; - mips:*:*:UMIPS | mips:*:*:RISCos) - eval "$set_cc_for_build" - sed 's/^ //' << EOF > "$dummy.c" -#ifdef __cplusplus -#include /* for printf() prototype */ - int main (int argc, char *argv[]) { -#else - int main (argc, argv) int argc; char *argv[]; { -#endif - #if defined (host_mips) && defined (MIPSEB) - #if defined (SYSTYPE_SYSV) - printf ("mips-mips-riscos%ssysv\\n", argv[1]); exit (0); - #endif - #if defined (SYSTYPE_SVR4) - printf ("mips-mips-riscos%ssvr4\\n", argv[1]); exit (0); - #endif - #if defined (SYSTYPE_BSD43) || defined(SYSTYPE_BSD) - printf ("mips-mips-riscos%sbsd\\n", argv[1]); exit (0); - #endif - #endif - exit (-1); - } -EOF - $CC_FOR_BUILD -o "$dummy" "$dummy.c" && - dummyarg=`echo "$UNAME_RELEASE" | sed -n 's/\([0-9]*\).*/\1/p'` && - SYSTEM_NAME=`"$dummy" "$dummyarg"` && - { echo "$SYSTEM_NAME"; exit; } - echo mips-mips-riscos"$UNAME_RELEASE" - exit ;; - Motorola:PowerMAX_OS:*:*) - echo powerpc-motorola-powermax - exit ;; - Motorola:*:4.3:PL8-*) - echo powerpc-harris-powermax - exit ;; - Night_Hawk:*:*:PowerMAX_OS | Synergy:PowerMAX_OS:*:*) - echo powerpc-harris-powermax - exit ;; - Night_Hawk:Power_UNIX:*:*) - echo powerpc-harris-powerunix - exit ;; - m88k:CX/UX:7*:*) - echo m88k-harris-cxux7 - exit ;; - m88k:*:4*:R4*) - echo m88k-motorola-sysv4 - exit ;; - m88k:*:3*:R3*) - echo m88k-motorola-sysv3 - exit ;; - AViiON:dgux:*:*) - # DG/UX returns AViiON for all architectures - UNAME_PROCESSOR=`/usr/bin/uname -p` - if [ "$UNAME_PROCESSOR" = mc88100 ] || [ "$UNAME_PROCESSOR" = mc88110 ] - then - if [ "$TARGET_BINARY_INTERFACE"x = m88kdguxelfx ] || \ - [ "$TARGET_BINARY_INTERFACE"x = x ] - then - echo m88k-dg-dgux"$UNAME_RELEASE" - else - echo m88k-dg-dguxbcs"$UNAME_RELEASE" - fi - else - echo i586-dg-dgux"$UNAME_RELEASE" - fi - exit ;; - M88*:DolphinOS:*:*) # DolphinOS (SVR3) - echo m88k-dolphin-sysv3 - exit ;; - M88*:*:R3*:*) - # Delta 88k system running SVR3 - echo m88k-motorola-sysv3 - exit ;; - XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3) - echo m88k-tektronix-sysv3 - exit ;; - Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD) - echo m68k-tektronix-bsd - exit ;; - *:IRIX*:*:*) - echo mips-sgi-irix"`echo "$UNAME_RELEASE"|sed -e 's/-/_/g'`" - exit ;; - ????????:AIX?:[12].1:2) # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX. - echo romp-ibm-aix # uname -m gives an 8 hex-code CPU id - exit ;; # Note that: echo "'`uname -s`'" gives 'AIX ' - i*86:AIX:*:*) - echo i386-ibm-aix - exit ;; - ia64:AIX:*:*) - if [ -x /usr/bin/oslevel ] ; then - IBM_REV=`/usr/bin/oslevel` - else - IBM_REV="$UNAME_VERSION.$UNAME_RELEASE" - fi - echo "$UNAME_MACHINE"-ibm-aix"$IBM_REV" - exit ;; - *:AIX:2:3) - if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then - eval "$set_cc_for_build" - sed 's/^ //' << EOF > "$dummy.c" - #include - - main() - { - if (!__power_pc()) - exit(1); - puts("powerpc-ibm-aix3.2.5"); - exit(0); - } -EOF - if $CC_FOR_BUILD -o "$dummy" "$dummy.c" && SYSTEM_NAME=`"$dummy"` - then - echo "$SYSTEM_NAME" - else - echo rs6000-ibm-aix3.2.5 - fi - elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then - echo rs6000-ibm-aix3.2.4 - else - echo rs6000-ibm-aix3.2 - fi - exit ;; - *:AIX:*:[4567]) - IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'` - if /usr/sbin/lsattr -El "$IBM_CPU_ID" | grep ' POWER' >/dev/null 2>&1; then - IBM_ARCH=rs6000 - else - IBM_ARCH=powerpc - fi - if [ -x /usr/bin/lslpp ] ; then - IBM_REV=`/usr/bin/lslpp -Lqc bos.rte.libc | - awk -F: '{ print $3 }' | sed s/[0-9]*$/0/` - else - IBM_REV="$UNAME_VERSION.$UNAME_RELEASE" - fi - echo "$IBM_ARCH"-ibm-aix"$IBM_REV" - exit ;; - *:AIX:*:*) - echo rs6000-ibm-aix - exit ;; - ibmrt:4.4BSD:*|romp-ibm:4.4BSD:*) - echo romp-ibm-bsd4.4 - exit ;; - ibmrt:*BSD:*|romp-ibm:BSD:*) # covers RT/PC BSD and - echo romp-ibm-bsd"$UNAME_RELEASE" # 4.3 with uname added to - exit ;; # report: romp-ibm BSD 4.3 - *:BOSX:*:*) - echo rs6000-bull-bosx - exit ;; - DPX/2?00:B.O.S.:*:*) - echo m68k-bull-sysv3 - exit ;; - 9000/[34]??:4.3bsd:1.*:*) - echo m68k-hp-bsd - exit ;; - hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*) - echo m68k-hp-bsd4.4 - exit ;; - 9000/[34678]??:HP-UX:*:*) - HPUX_REV=`echo "$UNAME_RELEASE"|sed -e 's/[^.]*.[0B]*//'` - case "$UNAME_MACHINE" in - 9000/31?) HP_ARCH=m68000 ;; - 9000/[34]??) HP_ARCH=m68k ;; - 9000/[678][0-9][0-9]) - if [ -x /usr/bin/getconf ]; then - sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null` - sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null` - case "$sc_cpu_version" in - 523) HP_ARCH=hppa1.0 ;; # CPU_PA_RISC1_0 - 528) HP_ARCH=hppa1.1 ;; # CPU_PA_RISC1_1 - 532) # CPU_PA_RISC2_0 - case "$sc_kernel_bits" in - 32) HP_ARCH=hppa2.0n ;; - 64) HP_ARCH=hppa2.0w ;; - '') HP_ARCH=hppa2.0 ;; # HP-UX 10.20 - esac ;; - esac - fi - if [ "$HP_ARCH" = "" ]; then - eval "$set_cc_for_build" - sed 's/^ //' << EOF > "$dummy.c" - - #define _HPUX_SOURCE - #include - #include - - int main () - { - #if defined(_SC_KERNEL_BITS) - long bits = sysconf(_SC_KERNEL_BITS); - #endif - long cpu = sysconf (_SC_CPU_VERSION); - - switch (cpu) - { - case CPU_PA_RISC1_0: puts ("hppa1.0"); break; - case CPU_PA_RISC1_1: puts ("hppa1.1"); break; - case CPU_PA_RISC2_0: - #if defined(_SC_KERNEL_BITS) - switch (bits) - { - case 64: puts ("hppa2.0w"); break; - case 32: puts ("hppa2.0n"); break; - default: puts ("hppa2.0"); break; - } break; - #else /* !defined(_SC_KERNEL_BITS) */ - puts ("hppa2.0"); break; - #endif - default: puts ("hppa1.0"); break; - } - exit (0); - } -EOF - (CCOPTS="" $CC_FOR_BUILD -o "$dummy" "$dummy.c" 2>/dev/null) && HP_ARCH=`"$dummy"` - test -z "$HP_ARCH" && HP_ARCH=hppa - fi ;; - esac - if [ "$HP_ARCH" = hppa2.0w ] - then - eval "$set_cc_for_build" - - # hppa2.0w-hp-hpux* has a 64-bit kernel and a compiler generating - # 32-bit code. hppa64-hp-hpux* has the same kernel and a compiler - # generating 64-bit code. GNU and HP use different nomenclature: - # - # $ CC_FOR_BUILD=cc ./config.guess - # => hppa2.0w-hp-hpux11.23 - # $ CC_FOR_BUILD="cc +DA2.0w" ./config.guess - # => hppa64-hp-hpux11.23 - - if echo __LP64__ | (CCOPTS="" $CC_FOR_BUILD -E - 2>/dev/null) | - grep -q __LP64__ - then - HP_ARCH=hppa2.0w - else - HP_ARCH=hppa64 - fi - fi - echo "$HP_ARCH"-hp-hpux"$HPUX_REV" - exit ;; - ia64:HP-UX:*:*) - HPUX_REV=`echo "$UNAME_RELEASE"|sed -e 's/[^.]*.[0B]*//'` - echo ia64-hp-hpux"$HPUX_REV" - exit ;; - 3050*:HI-UX:*:*) - eval "$set_cc_for_build" - sed 's/^ //' << EOF > "$dummy.c" - #include - int - main () - { - long cpu = sysconf (_SC_CPU_VERSION); - /* The order matters, because CPU_IS_HP_MC68K erroneously returns - true for CPU_PA_RISC1_0. CPU_IS_PA_RISC returns correct - results, however. */ - if (CPU_IS_PA_RISC (cpu)) - { - switch (cpu) - { - case CPU_PA_RISC1_0: puts ("hppa1.0-hitachi-hiuxwe2"); break; - case CPU_PA_RISC1_1: puts ("hppa1.1-hitachi-hiuxwe2"); break; - case CPU_PA_RISC2_0: puts ("hppa2.0-hitachi-hiuxwe2"); break; - default: puts ("hppa-hitachi-hiuxwe2"); break; - } - } - else if (CPU_IS_HP_MC68K (cpu)) - puts ("m68k-hitachi-hiuxwe2"); - else puts ("unknown-hitachi-hiuxwe2"); - exit (0); - } -EOF - $CC_FOR_BUILD -o "$dummy" "$dummy.c" && SYSTEM_NAME=`"$dummy"` && - { echo "$SYSTEM_NAME"; exit; } - echo unknown-hitachi-hiuxwe2 - exit ;; - 9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:*) - echo hppa1.1-hp-bsd - exit ;; - 9000/8??:4.3bsd:*:*) - echo hppa1.0-hp-bsd - exit ;; - *9??*:MPE/iX:*:* | *3000*:MPE/iX:*:*) - echo hppa1.0-hp-mpeix - exit ;; - hp7??:OSF1:*:* | hp8?[79]:OSF1:*:*) - echo hppa1.1-hp-osf - exit ;; - hp8??:OSF1:*:*) - echo hppa1.0-hp-osf - exit ;; - i*86:OSF1:*:*) - if [ -x /usr/sbin/sysversion ] ; then - echo "$UNAME_MACHINE"-unknown-osf1mk - else - echo "$UNAME_MACHINE"-unknown-osf1 - fi - exit ;; - parisc*:Lites*:*:*) - echo hppa1.1-hp-lites - exit ;; - C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*) - echo c1-convex-bsd - exit ;; - C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*) - if getsysinfo -f scalar_acc - then echo c32-convex-bsd - else echo c2-convex-bsd - fi - exit ;; - C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*) - echo c34-convex-bsd - exit ;; - C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*) - echo c38-convex-bsd - exit ;; - C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*) - echo c4-convex-bsd - exit ;; - CRAY*Y-MP:*:*:*) - echo ymp-cray-unicos"$UNAME_RELEASE" | sed -e 's/\.[^.]*$/.X/' - exit ;; - CRAY*[A-Z]90:*:*:*) - echo "$UNAME_MACHINE"-cray-unicos"$UNAME_RELEASE" \ - | sed -e 's/CRAY.*\([A-Z]90\)/\1/' \ - -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/ \ - -e 's/\.[^.]*$/.X/' - exit ;; - CRAY*TS:*:*:*) - echo t90-cray-unicos"$UNAME_RELEASE" | sed -e 's/\.[^.]*$/.X/' - exit ;; - CRAY*T3E:*:*:*) - echo alphaev5-cray-unicosmk"$UNAME_RELEASE" | sed -e 's/\.[^.]*$/.X/' - exit ;; - CRAY*SV1:*:*:*) - echo sv1-cray-unicos"$UNAME_RELEASE" | sed -e 's/\.[^.]*$/.X/' - exit ;; - *:UNICOS/mp:*:*) - echo craynv-cray-unicosmp"$UNAME_RELEASE" | sed -e 's/\.[^.]*$/.X/' - exit ;; - F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*) - FUJITSU_PROC=`uname -m | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz` - FUJITSU_SYS=`uname -p | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz | sed -e 's/\///'` - FUJITSU_REL=`echo "$UNAME_RELEASE" | sed -e 's/ /_/'` - echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}" - exit ;; - 5000:UNIX_System_V:4.*:*) - FUJITSU_SYS=`uname -p | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz | sed -e 's/\///'` - FUJITSU_REL=`echo "$UNAME_RELEASE" | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz | sed -e 's/ /_/'` - echo "sparc-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}" - exit ;; - i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*) - echo "$UNAME_MACHINE"-pc-bsdi"$UNAME_RELEASE" - exit ;; - sparc*:BSD/OS:*:*) - echo sparc-unknown-bsdi"$UNAME_RELEASE" - exit ;; - *:BSD/OS:*:*) - echo "$UNAME_MACHINE"-unknown-bsdi"$UNAME_RELEASE" - exit ;; - *:FreeBSD:*:*) - UNAME_PROCESSOR=`/usr/bin/uname -p` - case "$UNAME_PROCESSOR" in - amd64) - UNAME_PROCESSOR=x86_64 ;; - i386) - UNAME_PROCESSOR=i586 ;; - esac - echo "$UNAME_PROCESSOR"-unknown-freebsd"`echo "$UNAME_RELEASE"|sed -e 's/[-(].*//'`" - exit ;; - i*:CYGWIN*:*) - echo "$UNAME_MACHINE"-pc-cygwin - exit ;; - *:MINGW64*:*) - echo "$UNAME_MACHINE"-pc-mingw64 - exit ;; - *:MINGW*:*) - echo "$UNAME_MACHINE"-pc-mingw32 - exit ;; - *:MSYS*:*) - echo "$UNAME_MACHINE"-pc-msys - exit ;; - i*:PW*:*) - echo "$UNAME_MACHINE"-pc-pw32 - exit ;; - *:Interix*:*) - case "$UNAME_MACHINE" in - x86) - echo i586-pc-interix"$UNAME_RELEASE" - exit ;; - authenticamd | genuineintel | EM64T) - echo x86_64-unknown-interix"$UNAME_RELEASE" - exit ;; - IA64) - echo ia64-unknown-interix"$UNAME_RELEASE" - exit ;; - esac ;; - i*:UWIN*:*) - echo "$UNAME_MACHINE"-pc-uwin - exit ;; - amd64:CYGWIN*:*:* | x86_64:CYGWIN*:*:*) - echo x86_64-unknown-cygwin - exit ;; - prep*:SunOS:5.*:*) - echo powerpcle-unknown-solaris2"`echo "$UNAME_RELEASE"|sed -e 's/[^.]*//'`" - exit ;; - *:GNU:*:*) - # the GNU system - echo "`echo "$UNAME_MACHINE"|sed -e 's,[-/].*$,,'`-unknown-$LIBC`echo "$UNAME_RELEASE"|sed -e 's,/.*$,,'`" - exit ;; - *:GNU/*:*:*) - # other systems with GNU libc and userland - echo "$UNAME_MACHINE-unknown-`echo "$UNAME_SYSTEM" | sed 's,^[^/]*/,,' | tr "[:upper:]" "[:lower:]"``echo "$UNAME_RELEASE"|sed -e 's/[-(].*//'`-$LIBC" - exit ;; - i*86:Minix:*:*) - echo "$UNAME_MACHINE"-pc-minix - exit ;; - aarch64:Linux:*:*) - echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" - exit ;; - aarch64_be:Linux:*:*) - UNAME_MACHINE=aarch64_be - echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" - exit ;; - alpha:Linux:*:*) - case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in - EV5) UNAME_MACHINE=alphaev5 ;; - EV56) UNAME_MACHINE=alphaev56 ;; - PCA56) UNAME_MACHINE=alphapca56 ;; - PCA57) UNAME_MACHINE=alphapca56 ;; - EV6) UNAME_MACHINE=alphaev6 ;; - EV67) UNAME_MACHINE=alphaev67 ;; - EV68*) UNAME_MACHINE=alphaev68 ;; - esac - objdump --private-headers /bin/sh | grep -q ld.so.1 - if test "$?" = 0 ; then LIBC=gnulibc1 ; fi - echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" - exit ;; - arc:Linux:*:* | arceb:Linux:*:*) - echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" - exit ;; - arm*:Linux:*:*) - eval "$set_cc_for_build" - if echo __ARM_EABI__ | $CC_FOR_BUILD -E - 2>/dev/null \ - | grep -q __ARM_EABI__ - then - echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" - else - if echo __ARM_PCS_VFP | $CC_FOR_BUILD -E - 2>/dev/null \ - | grep -q __ARM_PCS_VFP - then - echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"eabi - else - echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"eabihf - fi - fi - exit ;; - avr32*:Linux:*:*) - echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" - exit ;; - cris:Linux:*:*) - echo "$UNAME_MACHINE"-axis-linux-"$LIBC" - exit ;; - crisv32:Linux:*:*) - echo "$UNAME_MACHINE"-axis-linux-"$LIBC" - exit ;; - e2k:Linux:*:*) - echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" - exit ;; - frv:Linux:*:*) - echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" - exit ;; - hexagon:Linux:*:*) - echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" - exit ;; - i*86:Linux:*:*) - echo "$UNAME_MACHINE"-pc-linux-"$LIBC" - exit ;; - ia64:Linux:*:*) - echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" - exit ;; - k1om:Linux:*:*) - echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" - exit ;; - m32r*:Linux:*:*) - echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" - exit ;; - m68*:Linux:*:*) - echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" - exit ;; - mips:Linux:*:* | mips64:Linux:*:*) - eval "$set_cc_for_build" - sed 's/^ //' << EOF > "$dummy.c" - #undef CPU - #undef ${UNAME_MACHINE} - #undef ${UNAME_MACHINE}el - #if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL) - CPU=${UNAME_MACHINE}el - #else - #if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB) - CPU=${UNAME_MACHINE} - #else - CPU= - #endif - #endif -EOF - eval "`$CC_FOR_BUILD -E "$dummy.c" 2>/dev/null | grep '^CPU'`" - test "x$CPU" != x && { echo "$CPU-unknown-linux-$LIBC"; exit; } - ;; - mips64el:Linux:*:*) - echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" - exit ;; - openrisc*:Linux:*:*) - echo or1k-unknown-linux-"$LIBC" - exit ;; - or32:Linux:*:* | or1k*:Linux:*:*) - echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" - exit ;; - padre:Linux:*:*) - echo sparc-unknown-linux-"$LIBC" - exit ;; - parisc64:Linux:*:* | hppa64:Linux:*:*) - echo hppa64-unknown-linux-"$LIBC" - exit ;; - parisc:Linux:*:* | hppa:Linux:*:*) - # Look for CPU level - case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in - PA7*) echo hppa1.1-unknown-linux-"$LIBC" ;; - PA8*) echo hppa2.0-unknown-linux-"$LIBC" ;; - *) echo hppa-unknown-linux-"$LIBC" ;; - esac - exit ;; - ppc64:Linux:*:*) - echo powerpc64-unknown-linux-"$LIBC" - exit ;; - ppc:Linux:*:*) - echo powerpc-unknown-linux-"$LIBC" - exit ;; - ppc64le:Linux:*:*) - echo powerpc64le-unknown-linux-"$LIBC" - exit ;; - ppcle:Linux:*:*) - echo powerpcle-unknown-linux-"$LIBC" - exit ;; - riscv32:Linux:*:* | riscv64:Linux:*:*) - echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" - exit ;; - s390:Linux:*:* | s390x:Linux:*:*) - echo "$UNAME_MACHINE"-ibm-linux-"$LIBC" - exit ;; - sh64*:Linux:*:*) - echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" - exit ;; - sh*:Linux:*:*) - echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" - exit ;; - sparc:Linux:*:* | sparc64:Linux:*:*) - echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" - exit ;; - tile*:Linux:*:*) - echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" - exit ;; - vax:Linux:*:*) - echo "$UNAME_MACHINE"-dec-linux-"$LIBC" - exit ;; - x86_64:Linux:*:*) - echo "$UNAME_MACHINE"-pc-linux-"$LIBC" - exit ;; - xtensa*:Linux:*:*) - echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" - exit ;; - i*86:DYNIX/ptx:4*:*) - # ptx 4.0 does uname -s correctly, with DYNIX/ptx in there. - # earlier versions are messed up and put the nodename in both - # sysname and nodename. - echo i386-sequent-sysv4 - exit ;; - i*86:UNIX_SV:4.2MP:2.*) - # Unixware is an offshoot of SVR4, but it has its own version - # number series starting with 2... - # I am not positive that other SVR4 systems won't match this, - # I just have to hope. -- rms. - # Use sysv4.2uw... so that sysv4* matches it. - echo "$UNAME_MACHINE"-pc-sysv4.2uw"$UNAME_VERSION" - exit ;; - i*86:OS/2:*:*) - # If we were able to find `uname', then EMX Unix compatibility - # is probably installed. - echo "$UNAME_MACHINE"-pc-os2-emx - exit ;; - i*86:XTS-300:*:STOP) - echo "$UNAME_MACHINE"-unknown-stop - exit ;; - i*86:atheos:*:*) - echo "$UNAME_MACHINE"-unknown-atheos - exit ;; - i*86:syllable:*:*) - echo "$UNAME_MACHINE"-pc-syllable - exit ;; - i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.[02]*:*) - echo i386-unknown-lynxos"$UNAME_RELEASE" - exit ;; - i*86:*DOS:*:*) - echo "$UNAME_MACHINE"-pc-msdosdjgpp - exit ;; - i*86:*:4.*:*) - UNAME_REL=`echo "$UNAME_RELEASE" | sed 's/\/MP$//'` - if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then - echo "$UNAME_MACHINE"-univel-sysv"$UNAME_REL" - else - echo "$UNAME_MACHINE"-pc-sysv"$UNAME_REL" - fi - exit ;; - i*86:*:5:[678]*) - # UnixWare 7.x, OpenUNIX and OpenServer 6. - case `/bin/uname -X | grep "^Machine"` in - *486*) UNAME_MACHINE=i486 ;; - *Pentium) UNAME_MACHINE=i586 ;; - *Pent*|*Celeron) UNAME_MACHINE=i686 ;; - esac - echo "$UNAME_MACHINE-unknown-sysv${UNAME_RELEASE}${UNAME_SYSTEM}{$UNAME_VERSION}" - exit ;; - i*86:*:3.2:*) - if test -f /usr/options/cb.name; then - UNAME_REL=`sed -n 's/.*Version //p' /dev/null >/dev/null ; then - UNAME_REL=`(/bin/uname -X|grep Release|sed -e 's/.*= //')` - (/bin/uname -X|grep i80486 >/dev/null) && UNAME_MACHINE=i486 - (/bin/uname -X|grep '^Machine.*Pentium' >/dev/null) \ - && UNAME_MACHINE=i586 - (/bin/uname -X|grep '^Machine.*Pent *II' >/dev/null) \ - && UNAME_MACHINE=i686 - (/bin/uname -X|grep '^Machine.*Pentium Pro' >/dev/null) \ - && UNAME_MACHINE=i686 - echo "$UNAME_MACHINE"-pc-sco"$UNAME_REL" - else - echo "$UNAME_MACHINE"-pc-sysv32 - fi - exit ;; - pc:*:*:*) - # Left here for compatibility: - # uname -m prints for DJGPP always 'pc', but it prints nothing about - # the processor, so we play safe by assuming i586. - # Note: whatever this is, it MUST be the same as what config.sub - # prints for the "djgpp" host, or else GDB configure will decide that - # this is a cross-build. - echo i586-pc-msdosdjgpp - exit ;; - Intel:Mach:3*:*) - echo i386-pc-mach3 - exit ;; - paragon:*:*:*) - echo i860-intel-osf1 - exit ;; - i860:*:4.*:*) # i860-SVR4 - if grep Stardent /usr/include/sys/uadmin.h >/dev/null 2>&1 ; then - echo i860-stardent-sysv"$UNAME_RELEASE" # Stardent Vistra i860-SVR4 - else # Add other i860-SVR4 vendors below as they are discovered. - echo i860-unknown-sysv"$UNAME_RELEASE" # Unknown i860-SVR4 - fi - exit ;; - mini*:CTIX:SYS*5:*) - # "miniframe" - echo m68010-convergent-sysv - exit ;; - mc68k:UNIX:SYSTEM5:3.51m) - echo m68k-convergent-sysv - exit ;; - M680?0:D-NIX:5.3:*) - echo m68k-diab-dnix - exit ;; - M68*:*:R3V[5678]*:*) - test -r /sysV68 && { echo 'm68k-motorola-sysv'; exit; } ;; - 3[345]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4400:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0 | SDS2:*:4.0:3.0 | SHG2:*:4.0:3.0 | S7501*:*:4.0:3.0) - OS_REL='' - test -r /etc/.relid \ - && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid` - /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ - && { echo i486-ncr-sysv4.3"$OS_REL"; exit; } - /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \ - && { echo i586-ncr-sysv4.3"$OS_REL"; exit; } ;; - 3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*) - /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ - && { echo i486-ncr-sysv4; exit; } ;; - NCR*:*:4.2:* | MPRAS*:*:4.2:*) - OS_REL='.3' - test -r /etc/.relid \ - && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid` - /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ - && { echo i486-ncr-sysv4.3"$OS_REL"; exit; } - /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \ - && { echo i586-ncr-sysv4.3"$OS_REL"; exit; } - /bin/uname -p 2>/dev/null | /bin/grep pteron >/dev/null \ - && { echo i586-ncr-sysv4.3"$OS_REL"; exit; } ;; - m68*:LynxOS:2.*:* | m68*:LynxOS:3.0*:*) - echo m68k-unknown-lynxos"$UNAME_RELEASE" - exit ;; - mc68030:UNIX_System_V:4.*:*) - echo m68k-atari-sysv4 - exit ;; - TSUNAMI:LynxOS:2.*:*) - echo sparc-unknown-lynxos"$UNAME_RELEASE" - exit ;; - rs6000:LynxOS:2.*:*) - echo rs6000-unknown-lynxos"$UNAME_RELEASE" - exit ;; - PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.[02]*:*) - echo powerpc-unknown-lynxos"$UNAME_RELEASE" - exit ;; - SM[BE]S:UNIX_SV:*:*) - echo mips-dde-sysv"$UNAME_RELEASE" - exit ;; - RM*:ReliantUNIX-*:*:*) - echo mips-sni-sysv4 - exit ;; - RM*:SINIX-*:*:*) - echo mips-sni-sysv4 - exit ;; - *:SINIX-*:*:*) - if uname -p 2>/dev/null >/dev/null ; then - UNAME_MACHINE=`(uname -p) 2>/dev/null` - echo "$UNAME_MACHINE"-sni-sysv4 - else - echo ns32k-sni-sysv - fi - exit ;; - PENTIUM:*:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort - # says - echo i586-unisys-sysv4 - exit ;; - *:UNIX_System_V:4*:FTX*) - # From Gerald Hewes . - # How about differentiating between stratus architectures? -djm - echo hppa1.1-stratus-sysv4 - exit ;; - *:*:*:FTX*) - # From seanf@swdc.stratus.com. - echo i860-stratus-sysv4 - exit ;; - i*86:VOS:*:*) - # From Paul.Green@stratus.com. - echo "$UNAME_MACHINE"-stratus-vos - exit ;; - *:VOS:*:*) - # From Paul.Green@stratus.com. - echo hppa1.1-stratus-vos - exit ;; - mc68*:A/UX:*:*) - echo m68k-apple-aux"$UNAME_RELEASE" - exit ;; - news*:NEWS-OS:6*:*) - echo mips-sony-newsos6 - exit ;; - R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*) - if [ -d /usr/nec ]; then - echo mips-nec-sysv"$UNAME_RELEASE" - else - echo mips-unknown-sysv"$UNAME_RELEASE" - fi - exit ;; - BeBox:BeOS:*:*) # BeOS running on hardware made by Be, PPC only. - echo powerpc-be-beos - exit ;; - BeMac:BeOS:*:*) # BeOS running on Mac or Mac clone, PPC only. - echo powerpc-apple-beos - exit ;; - BePC:BeOS:*:*) # BeOS running on Intel PC compatible. - echo i586-pc-beos - exit ;; - BePC:Haiku:*:*) # Haiku running on Intel PC compatible. - echo i586-pc-haiku - exit ;; - x86_64:Haiku:*:*) - echo x86_64-unknown-haiku - exit ;; - SX-4:SUPER-UX:*:*) - echo sx4-nec-superux"$UNAME_RELEASE" - exit ;; - SX-5:SUPER-UX:*:*) - echo sx5-nec-superux"$UNAME_RELEASE" - exit ;; - SX-6:SUPER-UX:*:*) - echo sx6-nec-superux"$UNAME_RELEASE" - exit ;; - SX-7:SUPER-UX:*:*) - echo sx7-nec-superux"$UNAME_RELEASE" - exit ;; - SX-8:SUPER-UX:*:*) - echo sx8-nec-superux"$UNAME_RELEASE" - exit ;; - SX-8R:SUPER-UX:*:*) - echo sx8r-nec-superux"$UNAME_RELEASE" - exit ;; - SX-ACE:SUPER-UX:*:*) - echo sxace-nec-superux"$UNAME_RELEASE" - exit ;; - Power*:Rhapsody:*:*) - echo powerpc-apple-rhapsody"$UNAME_RELEASE" - exit ;; - *:Rhapsody:*:*) - echo "$UNAME_MACHINE"-apple-rhapsody"$UNAME_RELEASE" - exit ;; - *:Darwin:*:*) - UNAME_PROCESSOR=`uname -p` || UNAME_PROCESSOR=unknown - eval "$set_cc_for_build" - if test "$UNAME_PROCESSOR" = unknown ; then - UNAME_PROCESSOR=powerpc - fi - if test "`echo "$UNAME_RELEASE" | sed -e 's/\..*//'`" -le 10 ; then - if [ "$CC_FOR_BUILD" != no_compiler_found ]; then - if (echo '#ifdef __LP64__'; echo IS_64BIT_ARCH; echo '#endif') | \ - (CCOPTS="" $CC_FOR_BUILD -E - 2>/dev/null) | \ - grep IS_64BIT_ARCH >/dev/null - then - case $UNAME_PROCESSOR in - i386) UNAME_PROCESSOR=x86_64 ;; - powerpc) UNAME_PROCESSOR=powerpc64 ;; - esac - fi - # On 10.4-10.6 one might compile for PowerPC via gcc -arch ppc - if (echo '#ifdef __POWERPC__'; echo IS_PPC; echo '#endif') | \ - (CCOPTS="" $CC_FOR_BUILD -E - 2>/dev/null) | \ - grep IS_PPC >/dev/null - then - UNAME_PROCESSOR=powerpc - fi - fi - elif test "$UNAME_PROCESSOR" = i386 ; then - # Avoid executing cc on OS X 10.9, as it ships with a stub - # that puts up a graphical alert prompting to install - # developer tools. Any system running Mac OS X 10.7 or - # later (Darwin 11 and later) is required to have a 64-bit - # processor. This is not true of the ARM version of Darwin - # that Apple uses in portable devices. - UNAME_PROCESSOR=x86_64 - fi - echo "$UNAME_PROCESSOR"-apple-darwin"$UNAME_RELEASE" - exit ;; - *:procnto*:*:* | *:QNX:[0123456789]*:*) - UNAME_PROCESSOR=`uname -p` - if test "$UNAME_PROCESSOR" = x86; then - UNAME_PROCESSOR=i386 - UNAME_MACHINE=pc - fi - echo "$UNAME_PROCESSOR"-"$UNAME_MACHINE"-nto-qnx"$UNAME_RELEASE" - exit ;; - *:QNX:*:4*) - echo i386-pc-qnx - exit ;; - NEO-*:NONSTOP_KERNEL:*:*) - echo neo-tandem-nsk"$UNAME_RELEASE" - exit ;; - NSE-*:NONSTOP_KERNEL:*:*) - echo nse-tandem-nsk"$UNAME_RELEASE" - exit ;; - NSR-*:NONSTOP_KERNEL:*:*) - echo nsr-tandem-nsk"$UNAME_RELEASE" - exit ;; - NSV-*:NONSTOP_KERNEL:*:*) - echo nsv-tandem-nsk"$UNAME_RELEASE" - exit ;; - NSX-*:NONSTOP_KERNEL:*:*) - echo nsx-tandem-nsk"$UNAME_RELEASE" - exit ;; - *:NonStop-UX:*:*) - echo mips-compaq-nonstopux - exit ;; - BS2000:POSIX*:*:*) - echo bs2000-siemens-sysv - exit ;; - DS/*:UNIX_System_V:*:*) - echo "$UNAME_MACHINE"-"$UNAME_SYSTEM"-"$UNAME_RELEASE" - exit ;; - *:Plan9:*:*) - # "uname -m" is not consistent, so use $cputype instead. 386 - # is converted to i386 for consistency with other x86 - # operating systems. - if test "$cputype" = 386; then - UNAME_MACHINE=i386 - else - UNAME_MACHINE="$cputype" - fi - echo "$UNAME_MACHINE"-unknown-plan9 - exit ;; - *:TOPS-10:*:*) - echo pdp10-unknown-tops10 - exit ;; - *:TENEX:*:*) - echo pdp10-unknown-tenex - exit ;; - KS10:TOPS-20:*:* | KL10:TOPS-20:*:* | TYPE4:TOPS-20:*:*) - echo pdp10-dec-tops20 - exit ;; - XKL-1:TOPS-20:*:* | TYPE5:TOPS-20:*:*) - echo pdp10-xkl-tops20 - exit ;; - *:TOPS-20:*:*) - echo pdp10-unknown-tops20 - exit ;; - *:ITS:*:*) - echo pdp10-unknown-its - exit ;; - SEI:*:*:SEIUX) - echo mips-sei-seiux"$UNAME_RELEASE" - exit ;; - *:DragonFly:*:*) - echo "$UNAME_MACHINE"-unknown-dragonfly"`echo "$UNAME_RELEASE"|sed -e 's/[-(].*//'`" - exit ;; - *:*VMS:*:*) - UNAME_MACHINE=`(uname -p) 2>/dev/null` - case "$UNAME_MACHINE" in - A*) echo alpha-dec-vms ; exit ;; - I*) echo ia64-dec-vms ; exit ;; - V*) echo vax-dec-vms ; exit ;; - esac ;; - *:XENIX:*:SysV) - echo i386-pc-xenix - exit ;; - i*86:skyos:*:*) - echo "$UNAME_MACHINE"-pc-skyos"`echo "$UNAME_RELEASE" | sed -e 's/ .*$//'`" - exit ;; - i*86:rdos:*:*) - echo "$UNAME_MACHINE"-pc-rdos - exit ;; - i*86:AROS:*:*) - echo "$UNAME_MACHINE"-pc-aros - exit ;; - x86_64:VMkernel:*:*) - echo "$UNAME_MACHINE"-unknown-esx - exit ;; - amd64:Isilon\ OneFS:*:*) - echo x86_64-unknown-onefs - exit ;; -esac - -echo "$0: unable to guess system type" >&2 - -case "$UNAME_MACHINE:$UNAME_SYSTEM" in - mips:Linux | mips64:Linux) - # If we got here on MIPS GNU/Linux, output extra information. - cat >&2 <&2 </dev/null || echo unknown` -uname -r = `(uname -r) 2>/dev/null || echo unknown` -uname -s = `(uname -s) 2>/dev/null || echo unknown` -uname -v = `(uname -v) 2>/dev/null || echo unknown` - -/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null` -/bin/uname -X = `(/bin/uname -X) 2>/dev/null` - -hostinfo = `(hostinfo) 2>/dev/null` -/bin/universe = `(/bin/universe) 2>/dev/null` -/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null` -/bin/arch = `(/bin/arch) 2>/dev/null` -/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null` -/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null` - -UNAME_MACHINE = "$UNAME_MACHINE" -UNAME_RELEASE = "$UNAME_RELEASE" -UNAME_SYSTEM = "$UNAME_SYSTEM" -UNAME_VERSION = "$UNAME_VERSION" -EOF - -exit 1 - -# Local variables: -# eval: (add-hook 'before-save-hook 'time-stamp) -# time-stamp-start: "timestamp='" -# time-stamp-format: "%:y-%02m-%02d" -# time-stamp-end: "'" -# End: diff --git a/config.sub b/config.sub deleted file mode 100755 index 9ccf09a7a..000000000 --- a/config.sub +++ /dev/null @@ -1,1801 +0,0 @@ -#! /bin/sh -# Configuration validation subroutine script. -# Copyright 1992-2018 Free Software Foundation, Inc. - -timestamp='2018-03-08' - -# This file is free software; you can redistribute it and/or modify it -# under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 3 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, but -# WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -# General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, see . -# -# As a special exception to the GNU General Public License, if you -# distribute this file as part of a program that contains a -# configuration script generated by Autoconf, you may include it under -# the same distribution terms that you use for the rest of that -# program. This Exception is an additional permission under section 7 -# of the GNU General Public License, version 3 ("GPLv3"). - - -# Please send patches to . -# -# Configuration subroutine to validate and canonicalize a configuration type. -# Supply the specified configuration type as an argument. -# If it is invalid, we print an error message on stderr and exit with code 1. -# Otherwise, we print the canonical config type on stdout and succeed. - -# You can get the latest version of this script from: -# https://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub - -# This file is supposed to be the same for all GNU packages -# and recognize all the CPU types, system types and aliases -# that are meaningful with *any* GNU software. -# Each package is responsible for reporting which valid configurations -# it does not support. The user should be able to distinguish -# a failure to support a valid configuration from a meaningless -# configuration. - -# The goal of this file is to map all the various variations of a given -# machine specification into a single specification in the form: -# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM -# or in some cases, the newer four-part form: -# CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM -# It is wrong to echo any other type of specification. - -me=`echo "$0" | sed -e 's,.*/,,'` - -usage="\ -Usage: $0 [OPTION] CPU-MFR-OPSYS or ALIAS - -Canonicalize a configuration name. - -Options: - -h, --help print this help, then exit - -t, --time-stamp print date of last modification, then exit - -v, --version print version number, then exit - -Report bugs and patches to ." - -version="\ -GNU config.sub ($timestamp) - -Copyright 1992-2018 Free Software Foundation, Inc. - -This is free software; see the source for copying conditions. There is NO -warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." - -help=" -Try \`$me --help' for more information." - -# Parse command line -while test $# -gt 0 ; do - case $1 in - --time-stamp | --time* | -t ) - echo "$timestamp" ; exit ;; - --version | -v ) - echo "$version" ; exit ;; - --help | --h* | -h ) - echo "$usage"; exit ;; - -- ) # Stop option processing - shift; break ;; - - ) # Use stdin as input. - break ;; - -* ) - echo "$me: invalid option $1$help" - exit 1 ;; - - *local*) - # First pass through any local machine types. - echo "$1" - exit ;; - - * ) - break ;; - esac -done - -case $# in - 0) echo "$me: missing argument$help" >&2 - exit 1;; - 1) ;; - *) echo "$me: too many arguments$help" >&2 - exit 1;; -esac - -# Separate what the user gave into CPU-COMPANY and OS or KERNEL-OS (if any). -# Here we must recognize all the valid KERNEL-OS combinations. -maybe_os=`echo "$1" | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'` -case $maybe_os in - nto-qnx* | linux-gnu* | linux-android* | linux-dietlibc | linux-newlib* | \ - linux-musl* | linux-uclibc* | uclinux-uclibc* | uclinux-gnu* | kfreebsd*-gnu* | \ - knetbsd*-gnu* | netbsd*-gnu* | netbsd*-eabi* | \ - kopensolaris*-gnu* | cloudabi*-eabi* | \ - storm-chaos* | os2-emx* | rtmk-nova*) - os=-$maybe_os - basic_machine=`echo "$1" | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'` - ;; - android-linux) - os=-linux-android - basic_machine=`echo "$1" | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`-unknown - ;; - *) - basic_machine=`echo "$1" | sed 's/-[^-]*$//'` - if [ "$basic_machine" != "$1" ] - then os=`echo "$1" | sed 's/.*-/-/'` - else os=; fi - ;; -esac - -### Let's recognize common machines as not being operating systems so -### that things like config.sub decstation-3100 work. We also -### recognize some manufacturers as not being operating systems, so we -### can provide default operating systems below. -case $os in - -sun*os*) - # Prevent following clause from handling this invalid input. - ;; - -dec* | -mips* | -sequent* | -encore* | -pc532* | -sgi* | -sony* | \ - -att* | -7300* | -3300* | -delta* | -motorola* | -sun[234]* | \ - -unicom* | -ibm* | -next | -hp | -isi* | -apollo | -altos* | \ - -convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\ - -c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \ - -harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp | \ - -apple | -axis | -knuth | -cray | -microblaze*) - os= - basic_machine=$1 - ;; - -bluegene*) - os=-cnk - ;; - -sim | -cisco | -oki | -wec | -winbond) - os= - basic_machine=$1 - ;; - -scout) - ;; - -wrs) - os=-vxworks - basic_machine=$1 - ;; - -chorusos*) - os=-chorusos - basic_machine=$1 - ;; - -chorusrdb) - os=-chorusrdb - basic_machine=$1 - ;; - -hiux*) - os=-hiuxwe2 - ;; - -sco6) - os=-sco5v6 - basic_machine=`echo "$1" | sed -e 's/86-.*/86-pc/'` - ;; - -sco5) - os=-sco3.2v5 - basic_machine=`echo "$1" | sed -e 's/86-.*/86-pc/'` - ;; - -sco4) - os=-sco3.2v4 - basic_machine=`echo "$1" | sed -e 's/86-.*/86-pc/'` - ;; - -sco3.2.[4-9]*) - os=`echo $os | sed -e 's/sco3.2./sco3.2v/'` - basic_machine=`echo "$1" | sed -e 's/86-.*/86-pc/'` - ;; - -sco3.2v[4-9]*) - # Don't forget version if it is 3.2v4 or newer. - basic_machine=`echo "$1" | sed -e 's/86-.*/86-pc/'` - ;; - -sco5v6*) - # Don't forget version if it is 3.2v4 or newer. - basic_machine=`echo "$1" | sed -e 's/86-.*/86-pc/'` - ;; - -sco*) - os=-sco3.2v2 - basic_machine=`echo "$1" | sed -e 's/86-.*/86-pc/'` - ;; - -udk*) - basic_machine=`echo "$1" | sed -e 's/86-.*/86-pc/'` - ;; - -isc) - os=-isc2.2 - basic_machine=`echo "$1" | sed -e 's/86-.*/86-pc/'` - ;; - -clix*) - basic_machine=clipper-intergraph - ;; - -isc*) - basic_machine=`echo "$1" | sed -e 's/86-.*/86-pc/'` - ;; - -lynx*178) - os=-lynxos178 - ;; - -lynx*5) - os=-lynxos5 - ;; - -lynx*) - os=-lynxos - ;; - -ptx*) - basic_machine=`echo "$1" | sed -e 's/86-.*/86-sequent/'` - ;; - -psos*) - os=-psos - ;; - -mint | -mint[0-9]*) - basic_machine=m68k-atari - os=-mint - ;; -esac - -# Decode aliases for certain CPU-COMPANY combinations. -case $basic_machine in - # Recognize the basic CPU types without company name. - # Some are omitted here because they have special meanings below. - 1750a | 580 \ - | a29k \ - | aarch64 | aarch64_be \ - | alpha | alphaev[4-8] | alphaev56 | alphaev6[78] | alphapca5[67] \ - | alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] | alpha64pca5[67] \ - | am33_2.0 \ - | arc | arceb \ - | arm | arm[bl]e | arme[lb] | armv[2-8] | armv[3-8][lb] | armv7[arm] \ - | avr | avr32 \ - | ba \ - | be32 | be64 \ - | bfin \ - | c4x | c8051 | clipper \ - | d10v | d30v | dlx | dsp16xx \ - | e2k | epiphany \ - | fido | fr30 | frv | ft32 \ - | h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \ - | hexagon \ - | i370 | i860 | i960 | ia16 | ia64 \ - | ip2k | iq2000 \ - | k1om \ - | le32 | le64 \ - | lm32 \ - | m32c | m32r | m32rle | m68000 | m68k | m88k \ - | maxq | mb | microblaze | microblazeel | mcore | mep | metag \ - | mips | mipsbe | mipseb | mipsel | mipsle \ - | mips16 \ - | mips64 | mips64el \ - | mips64octeon | mips64octeonel \ - | mips64orion | mips64orionel \ - | mips64r5900 | mips64r5900el \ - | mips64vr | mips64vrel \ - | mips64vr4100 | mips64vr4100el \ - | mips64vr4300 | mips64vr4300el \ - | mips64vr5000 | mips64vr5000el \ - | mips64vr5900 | mips64vr5900el \ - | mipsisa32 | mipsisa32el \ - | mipsisa32r2 | mipsisa32r2el \ - | mipsisa32r6 | mipsisa32r6el \ - | mipsisa64 | mipsisa64el \ - | mipsisa64r2 | mipsisa64r2el \ - | mipsisa64r6 | mipsisa64r6el \ - | mipsisa64sb1 | mipsisa64sb1el \ - | mipsisa64sr71k | mipsisa64sr71kel \ - | mipsr5900 | mipsr5900el \ - | mipstx39 | mipstx39el \ - | mn10200 | mn10300 \ - | moxie \ - | mt \ - | msp430 \ - | nds32 | nds32le | nds32be \ - | nios | nios2 | nios2eb | nios2el \ - | ns16k | ns32k \ - | open8 | or1k | or1knd | or32 \ - | pdp10 | pj | pjl \ - | powerpc | powerpc64 | powerpc64le | powerpcle \ - | pru \ - | pyramid \ - | riscv32 | riscv64 \ - | rl78 | rx \ - | score \ - | sh | sh[1234] | sh[24]a | sh[24]aeb | sh[23]e | sh[234]eb | sheb | shbe | shle | sh[1234]le | sh3ele \ - | sh64 | sh64le \ - | sparc | sparc64 | sparc64b | sparc64v | sparc86x | sparclet | sparclite \ - | sparcv8 | sparcv9 | sparcv9b | sparcv9v \ - | spu \ - | tahoe | tic4x | tic54x | tic55x | tic6x | tic80 | tron \ - | ubicom32 \ - | v850 | v850e | v850e1 | v850e2 | v850es | v850e2v3 \ - | visium \ - | wasm32 \ - | x86 | xc16x | xstormy16 | xtensa \ - | z8k | z80) - basic_machine=$basic_machine-unknown - ;; - c54x) - basic_machine=tic54x-unknown - ;; - c55x) - basic_machine=tic55x-unknown - ;; - c6x) - basic_machine=tic6x-unknown - ;; - leon|leon[3-9]) - basic_machine=sparc-$basic_machine - ;; - m6811 | m68hc11 | m6812 | m68hc12 | m68hcs12x | nvptx | picochip) - basic_machine=$basic_machine-unknown - os=-none - ;; - m88110 | m680[12346]0 | m683?2 | m68360 | m5200 | v70 | w65) - ;; - ms1) - basic_machine=mt-unknown - ;; - - strongarm | thumb | xscale) - basic_machine=arm-unknown - ;; - xgate) - basic_machine=$basic_machine-unknown - os=-none - ;; - xscaleeb) - basic_machine=armeb-unknown - ;; - - xscaleel) - basic_machine=armel-unknown - ;; - - # We use `pc' rather than `unknown' - # because (1) that's what they normally are, and - # (2) the word "unknown" tends to confuse beginning users. - i*86 | x86_64) - basic_machine=$basic_machine-pc - ;; - # Object if more than one company name word. - *-*-*) - echo Invalid configuration \`"$1"\': machine \`"$basic_machine"\' not recognized 1>&2 - exit 1 - ;; - # Recognize the basic CPU types with company name. - 580-* \ - | a29k-* \ - | aarch64-* | aarch64_be-* \ - | alpha-* | alphaev[4-8]-* | alphaev56-* | alphaev6[78]-* \ - | alpha64-* | alpha64ev[4-8]-* | alpha64ev56-* | alpha64ev6[78]-* \ - | alphapca5[67]-* | alpha64pca5[67]-* | arc-* | arceb-* \ - | arm-* | armbe-* | armle-* | armeb-* | armv*-* \ - | avr-* | avr32-* \ - | ba-* \ - | be32-* | be64-* \ - | bfin-* | bs2000-* \ - | c[123]* | c30-* | [cjt]90-* | c4x-* \ - | c8051-* | clipper-* | craynv-* | cydra-* \ - | d10v-* | d30v-* | dlx-* \ - | e2k-* | elxsi-* \ - | f30[01]-* | f700-* | fido-* | fr30-* | frv-* | fx80-* \ - | h8300-* | h8500-* \ - | hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \ - | hexagon-* \ - | i*86-* | i860-* | i960-* | ia16-* | ia64-* \ - | ip2k-* | iq2000-* \ - | k1om-* \ - | le32-* | le64-* \ - | lm32-* \ - | m32c-* | m32r-* | m32rle-* \ - | m68000-* | m680[012346]0-* | m68360-* | m683?2-* | m68k-* \ - | m88110-* | m88k-* | maxq-* | mcore-* | metag-* \ - | microblaze-* | microblazeel-* \ - | mips-* | mipsbe-* | mipseb-* | mipsel-* | mipsle-* \ - | mips16-* \ - | mips64-* | mips64el-* \ - | mips64octeon-* | mips64octeonel-* \ - | mips64orion-* | mips64orionel-* \ - | mips64r5900-* | mips64r5900el-* \ - | mips64vr-* | mips64vrel-* \ - | mips64vr4100-* | mips64vr4100el-* \ - | mips64vr4300-* | mips64vr4300el-* \ - | mips64vr5000-* | mips64vr5000el-* \ - | mips64vr5900-* | mips64vr5900el-* \ - | mipsisa32-* | mipsisa32el-* \ - | mipsisa32r2-* | mipsisa32r2el-* \ - | mipsisa32r6-* | mipsisa32r6el-* \ - | mipsisa64-* | mipsisa64el-* \ - | mipsisa64r2-* | mipsisa64r2el-* \ - | mipsisa64r6-* | mipsisa64r6el-* \ - | mipsisa64sb1-* | mipsisa64sb1el-* \ - | mipsisa64sr71k-* | mipsisa64sr71kel-* \ - | mipsr5900-* | mipsr5900el-* \ - | mipstx39-* | mipstx39el-* \ - | mmix-* \ - | mt-* \ - | msp430-* \ - | nds32-* | nds32le-* | nds32be-* \ - | nios-* | nios2-* | nios2eb-* | nios2el-* \ - | none-* | np1-* | ns16k-* | ns32k-* \ - | open8-* \ - | or1k*-* \ - | orion-* \ - | pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \ - | powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* \ - | pru-* \ - | pyramid-* \ - | riscv32-* | riscv64-* \ - | rl78-* | romp-* | rs6000-* | rx-* \ - | sh-* | sh[1234]-* | sh[24]a-* | sh[24]aeb-* | sh[23]e-* | sh[34]eb-* | sheb-* | shbe-* \ - | shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \ - | sparc-* | sparc64-* | sparc64b-* | sparc64v-* | sparc86x-* | sparclet-* \ - | sparclite-* \ - | sparcv8-* | sparcv9-* | sparcv9b-* | sparcv9v-* | sv1-* | sx*-* \ - | tahoe-* \ - | tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* \ - | tile*-* \ - | tron-* \ - | ubicom32-* \ - | v850-* | v850e-* | v850e1-* | v850es-* | v850e2-* | v850e2v3-* \ - | vax-* \ - | visium-* \ - | wasm32-* \ - | we32k-* \ - | x86-* | x86_64-* | xc16x-* | xps100-* \ - | xstormy16-* | xtensa*-* \ - | ymp-* \ - | z8k-* | z80-*) - ;; - # Recognize the basic CPU types without company name, with glob match. - xtensa*) - basic_machine=$basic_machine-unknown - ;; - # Recognize the various machine names and aliases which stand - # for a CPU type and a company and sometimes even an OS. - 386bsd) - basic_machine=i386-pc - os=-bsd - ;; - 3b1 | 7300 | 7300-att | att-7300 | pc7300 | safari | unixpc) - basic_machine=m68000-att - ;; - 3b*) - basic_machine=we32k-att - ;; - a29khif) - basic_machine=a29k-amd - os=-udi - ;; - abacus) - basic_machine=abacus-unknown - ;; - adobe68k) - basic_machine=m68010-adobe - os=-scout - ;; - alliant | fx80) - basic_machine=fx80-alliant - ;; - altos | altos3068) - basic_machine=m68k-altos - ;; - am29k) - basic_machine=a29k-none - os=-bsd - ;; - amd64) - basic_machine=x86_64-pc - ;; - amd64-*) - basic_machine=x86_64-`echo "$basic_machine" | sed 's/^[^-]*-//'` - ;; - amdahl) - basic_machine=580-amdahl - os=-sysv - ;; - amiga | amiga-*) - basic_machine=m68k-unknown - ;; - amigaos | amigados) - basic_machine=m68k-unknown - os=-amigaos - ;; - amigaunix | amix) - basic_machine=m68k-unknown - os=-sysv4 - ;; - apollo68) - basic_machine=m68k-apollo - os=-sysv - ;; - apollo68bsd) - basic_machine=m68k-apollo - os=-bsd - ;; - aros) - basic_machine=i386-pc - os=-aros - ;; - asmjs) - basic_machine=asmjs-unknown - ;; - aux) - basic_machine=m68k-apple - os=-aux - ;; - balance) - basic_machine=ns32k-sequent - os=-dynix - ;; - blackfin) - basic_machine=bfin-unknown - os=-linux - ;; - blackfin-*) - basic_machine=bfin-`echo "$basic_machine" | sed 's/^[^-]*-//'` - os=-linux - ;; - bluegene*) - basic_machine=powerpc-ibm - os=-cnk - ;; - c54x-*) - basic_machine=tic54x-`echo "$basic_machine" | sed 's/^[^-]*-//'` - ;; - c55x-*) - basic_machine=tic55x-`echo "$basic_machine" | sed 's/^[^-]*-//'` - ;; - c6x-*) - basic_machine=tic6x-`echo "$basic_machine" | sed 's/^[^-]*-//'` - ;; - c90) - basic_machine=c90-cray - os=-unicos - ;; - cegcc) - basic_machine=arm-unknown - os=-cegcc - ;; - convex-c1) - basic_machine=c1-convex - os=-bsd - ;; - convex-c2) - basic_machine=c2-convex - os=-bsd - ;; - convex-c32) - basic_machine=c32-convex - os=-bsd - ;; - convex-c34) - basic_machine=c34-convex - os=-bsd - ;; - convex-c38) - basic_machine=c38-convex - os=-bsd - ;; - cray | j90) - basic_machine=j90-cray - os=-unicos - ;; - craynv) - basic_machine=craynv-cray - os=-unicosmp - ;; - cr16 | cr16-*) - basic_machine=cr16-unknown - os=-elf - ;; - crds | unos) - basic_machine=m68k-crds - ;; - crisv32 | crisv32-* | etraxfs*) - basic_machine=crisv32-axis - ;; - cris | cris-* | etrax*) - basic_machine=cris-axis - ;; - crx) - basic_machine=crx-unknown - os=-elf - ;; - da30 | da30-*) - basic_machine=m68k-da30 - ;; - decstation | decstation-3100 | pmax | pmax-* | pmin | dec3100 | decstatn) - basic_machine=mips-dec - ;; - decsystem10* | dec10*) - basic_machine=pdp10-dec - os=-tops10 - ;; - decsystem20* | dec20*) - basic_machine=pdp10-dec - os=-tops20 - ;; - delta | 3300 | motorola-3300 | motorola-delta \ - | 3300-motorola | delta-motorola) - basic_machine=m68k-motorola - ;; - delta88) - basic_machine=m88k-motorola - os=-sysv3 - ;; - dicos) - basic_machine=i686-pc - os=-dicos - ;; - djgpp) - basic_machine=i586-pc - os=-msdosdjgpp - ;; - dpx20 | dpx20-*) - basic_machine=rs6000-bull - os=-bosx - ;; - dpx2*) - basic_machine=m68k-bull - os=-sysv3 - ;; - e500v[12]) - basic_machine=powerpc-unknown - os=$os"spe" - ;; - e500v[12]-*) - basic_machine=powerpc-`echo "$basic_machine" | sed 's/^[^-]*-//'` - os=$os"spe" - ;; - ebmon29k) - basic_machine=a29k-amd - os=-ebmon - ;; - elxsi) - basic_machine=elxsi-elxsi - os=-bsd - ;; - encore | umax | mmax) - basic_machine=ns32k-encore - ;; - es1800 | OSE68k | ose68k | ose | OSE) - basic_machine=m68k-ericsson - os=-ose - ;; - fx2800) - basic_machine=i860-alliant - ;; - genix) - basic_machine=ns32k-ns - ;; - gmicro) - basic_machine=tron-gmicro - os=-sysv - ;; - go32) - basic_machine=i386-pc - os=-go32 - ;; - h3050r* | hiux*) - basic_machine=hppa1.1-hitachi - os=-hiuxwe2 - ;; - h8300hms) - basic_machine=h8300-hitachi - os=-hms - ;; - h8300xray) - basic_machine=h8300-hitachi - os=-xray - ;; - h8500hms) - basic_machine=h8500-hitachi - os=-hms - ;; - harris) - basic_machine=m88k-harris - os=-sysv3 - ;; - hp300-*) - basic_machine=m68k-hp - ;; - hp300bsd) - basic_machine=m68k-hp - os=-bsd - ;; - hp300hpux) - basic_machine=m68k-hp - os=-hpux - ;; - hp3k9[0-9][0-9] | hp9[0-9][0-9]) - basic_machine=hppa1.0-hp - ;; - hp9k2[0-9][0-9] | hp9k31[0-9]) - basic_machine=m68000-hp - ;; - hp9k3[2-9][0-9]) - basic_machine=m68k-hp - ;; - hp9k6[0-9][0-9] | hp6[0-9][0-9]) - basic_machine=hppa1.0-hp - ;; - hp9k7[0-79][0-9] | hp7[0-79][0-9]) - basic_machine=hppa1.1-hp - ;; - hp9k78[0-9] | hp78[0-9]) - # FIXME: really hppa2.0-hp - basic_machine=hppa1.1-hp - ;; - hp9k8[67]1 | hp8[67]1 | hp9k80[24] | hp80[24] | hp9k8[78]9 | hp8[78]9 | hp9k893 | hp893) - # FIXME: really hppa2.0-hp - basic_machine=hppa1.1-hp - ;; - hp9k8[0-9][13679] | hp8[0-9][13679]) - basic_machine=hppa1.1-hp - ;; - hp9k8[0-9][0-9] | hp8[0-9][0-9]) - basic_machine=hppa1.0-hp - ;; - hppaosf) - basic_machine=hppa1.1-hp - os=-osf - ;; - hppro) - basic_machine=hppa1.1-hp - os=-proelf - ;; - i370-ibm* | ibm*) - basic_machine=i370-ibm - ;; - i*86v32) - basic_machine=`echo "$1" | sed -e 's/86.*/86-pc/'` - os=-sysv32 - ;; - i*86v4*) - basic_machine=`echo "$1" | sed -e 's/86.*/86-pc/'` - os=-sysv4 - ;; - i*86v) - basic_machine=`echo "$1" | sed -e 's/86.*/86-pc/'` - os=-sysv - ;; - i*86sol2) - basic_machine=`echo "$1" | sed -e 's/86.*/86-pc/'` - os=-solaris2 - ;; - i386mach) - basic_machine=i386-mach - os=-mach - ;; - vsta) - basic_machine=i386-unknown - os=-vsta - ;; - iris | iris4d) - basic_machine=mips-sgi - case $os in - -irix*) - ;; - *) - os=-irix4 - ;; - esac - ;; - isi68 | isi) - basic_machine=m68k-isi - os=-sysv - ;; - leon-*|leon[3-9]-*) - basic_machine=sparc-`echo "$basic_machine" | sed 's/-.*//'` - ;; - m68knommu) - basic_machine=m68k-unknown - os=-linux - ;; - m68knommu-*) - basic_machine=m68k-`echo "$basic_machine" | sed 's/^[^-]*-//'` - os=-linux - ;; - magnum | m3230) - basic_machine=mips-mips - os=-sysv - ;; - merlin) - basic_machine=ns32k-utek - os=-sysv - ;; - microblaze*) - basic_machine=microblaze-xilinx - ;; - mingw64) - basic_machine=x86_64-pc - os=-mingw64 - ;; - mingw32) - basic_machine=i686-pc - os=-mingw32 - ;; - mingw32ce) - basic_machine=arm-unknown - os=-mingw32ce - ;; - miniframe) - basic_machine=m68000-convergent - ;; - *mint | -mint[0-9]* | *MiNT | *MiNT[0-9]*) - basic_machine=m68k-atari - os=-mint - ;; - mips3*-*) - basic_machine=`echo "$basic_machine" | sed -e 's/mips3/mips64/'` - ;; - mips3*) - basic_machine=`echo "$basic_machine" | sed -e 's/mips3/mips64/'`-unknown - ;; - monitor) - basic_machine=m68k-rom68k - os=-coff - ;; - morphos) - basic_machine=powerpc-unknown - os=-morphos - ;; - moxiebox) - basic_machine=moxie-unknown - os=-moxiebox - ;; - msdos) - basic_machine=i386-pc - os=-msdos - ;; - ms1-*) - basic_machine=`echo "$basic_machine" | sed -e 's/ms1-/mt-/'` - ;; - msys) - basic_machine=i686-pc - os=-msys - ;; - mvs) - basic_machine=i370-ibm - os=-mvs - ;; - nacl) - basic_machine=le32-unknown - os=-nacl - ;; - ncr3000) - basic_machine=i486-ncr - os=-sysv4 - ;; - netbsd386) - basic_machine=i386-unknown - os=-netbsd - ;; - netwinder) - basic_machine=armv4l-rebel - os=-linux - ;; - news | news700 | news800 | news900) - basic_machine=m68k-sony - os=-newsos - ;; - news1000) - basic_machine=m68030-sony - os=-newsos - ;; - news-3600 | risc-news) - basic_machine=mips-sony - os=-newsos - ;; - necv70) - basic_machine=v70-nec - os=-sysv - ;; - next | m*-next) - basic_machine=m68k-next - case $os in - -nextstep* ) - ;; - -ns2*) - os=-nextstep2 - ;; - *) - os=-nextstep3 - ;; - esac - ;; - nh3000) - basic_machine=m68k-harris - os=-cxux - ;; - nh[45]000) - basic_machine=m88k-harris - os=-cxux - ;; - nindy960) - basic_machine=i960-intel - os=-nindy - ;; - mon960) - basic_machine=i960-intel - os=-mon960 - ;; - nonstopux) - basic_machine=mips-compaq - os=-nonstopux - ;; - np1) - basic_machine=np1-gould - ;; - neo-tandem) - basic_machine=neo-tandem - ;; - nse-tandem) - basic_machine=nse-tandem - ;; - nsr-tandem) - basic_machine=nsr-tandem - ;; - nsv-tandem) - basic_machine=nsv-tandem - ;; - nsx-tandem) - basic_machine=nsx-tandem - ;; - op50n-* | op60c-*) - basic_machine=hppa1.1-oki - os=-proelf - ;; - openrisc | openrisc-*) - basic_machine=or32-unknown - ;; - os400) - basic_machine=powerpc-ibm - os=-os400 - ;; - OSE68000 | ose68000) - basic_machine=m68000-ericsson - os=-ose - ;; - os68k) - basic_machine=m68k-none - os=-os68k - ;; - pa-hitachi) - basic_machine=hppa1.1-hitachi - os=-hiuxwe2 - ;; - paragon) - basic_machine=i860-intel - os=-osf - ;; - parisc) - basic_machine=hppa-unknown - os=-linux - ;; - parisc-*) - basic_machine=hppa-`echo "$basic_machine" | sed 's/^[^-]*-//'` - os=-linux - ;; - pbd) - basic_machine=sparc-tti - ;; - pbb) - basic_machine=m68k-tti - ;; - pc532 | pc532-*) - basic_machine=ns32k-pc532 - ;; - pc98) - basic_machine=i386-pc - ;; - pc98-*) - basic_machine=i386-`echo "$basic_machine" | sed 's/^[^-]*-//'` - ;; - pentium | p5 | k5 | k6 | nexgen | viac3) - basic_machine=i586-pc - ;; - pentiumpro | p6 | 6x86 | athlon | athlon_*) - basic_machine=i686-pc - ;; - pentiumii | pentium2 | pentiumiii | pentium3) - basic_machine=i686-pc - ;; - pentium4) - basic_machine=i786-pc - ;; - pentium-* | p5-* | k5-* | k6-* | nexgen-* | viac3-*) - basic_machine=i586-`echo "$basic_machine" | sed 's/^[^-]*-//'` - ;; - pentiumpro-* | p6-* | 6x86-* | athlon-*) - basic_machine=i686-`echo "$basic_machine" | sed 's/^[^-]*-//'` - ;; - pentiumii-* | pentium2-* | pentiumiii-* | pentium3-*) - basic_machine=i686-`echo "$basic_machine" | sed 's/^[^-]*-//'` - ;; - pentium4-*) - basic_machine=i786-`echo "$basic_machine" | sed 's/^[^-]*-//'` - ;; - pn) - basic_machine=pn-gould - ;; - power) basic_machine=power-ibm - ;; - ppc | ppcbe) basic_machine=powerpc-unknown - ;; - ppc-* | ppcbe-*) - basic_machine=powerpc-`echo "$basic_machine" | sed 's/^[^-]*-//'` - ;; - ppcle | powerpclittle) - basic_machine=powerpcle-unknown - ;; - ppcle-* | powerpclittle-*) - basic_machine=powerpcle-`echo "$basic_machine" | sed 's/^[^-]*-//'` - ;; - ppc64) basic_machine=powerpc64-unknown - ;; - ppc64-*) basic_machine=powerpc64-`echo "$basic_machine" | sed 's/^[^-]*-//'` - ;; - ppc64le | powerpc64little) - basic_machine=powerpc64le-unknown - ;; - ppc64le-* | powerpc64little-*) - basic_machine=powerpc64le-`echo "$basic_machine" | sed 's/^[^-]*-//'` - ;; - ps2) - basic_machine=i386-ibm - ;; - pw32) - basic_machine=i586-unknown - os=-pw32 - ;; - rdos | rdos64) - basic_machine=x86_64-pc - os=-rdos - ;; - rdos32) - basic_machine=i386-pc - os=-rdos - ;; - rom68k) - basic_machine=m68k-rom68k - os=-coff - ;; - rm[46]00) - basic_machine=mips-siemens - ;; - rtpc | rtpc-*) - basic_machine=romp-ibm - ;; - s390 | s390-*) - basic_machine=s390-ibm - ;; - s390x | s390x-*) - basic_machine=s390x-ibm - ;; - sa29200) - basic_machine=a29k-amd - os=-udi - ;; - sb1) - basic_machine=mipsisa64sb1-unknown - ;; - sb1el) - basic_machine=mipsisa64sb1el-unknown - ;; - sde) - basic_machine=mipsisa32-sde - os=-elf - ;; - sei) - basic_machine=mips-sei - os=-seiux - ;; - sequent) - basic_machine=i386-sequent - ;; - sh5el) - basic_machine=sh5le-unknown - ;; - simso-wrs) - basic_machine=sparclite-wrs - os=-vxworks - ;; - sps7) - basic_machine=m68k-bull - os=-sysv2 - ;; - spur) - basic_machine=spur-unknown - ;; - st2000) - basic_machine=m68k-tandem - ;; - stratus) - basic_machine=i860-stratus - os=-sysv4 - ;; - strongarm-* | thumb-*) - basic_machine=arm-`echo "$basic_machine" | sed 's/^[^-]*-//'` - ;; - sun2) - basic_machine=m68000-sun - ;; - sun2os3) - basic_machine=m68000-sun - os=-sunos3 - ;; - sun2os4) - basic_machine=m68000-sun - os=-sunos4 - ;; - sun3os3) - basic_machine=m68k-sun - os=-sunos3 - ;; - sun3os4) - basic_machine=m68k-sun - os=-sunos4 - ;; - sun4os3) - basic_machine=sparc-sun - os=-sunos3 - ;; - sun4os4) - basic_machine=sparc-sun - os=-sunos4 - ;; - sun4sol2) - basic_machine=sparc-sun - os=-solaris2 - ;; - sun3 | sun3-*) - basic_machine=m68k-sun - ;; - sun4) - basic_machine=sparc-sun - ;; - sun386 | sun386i | roadrunner) - basic_machine=i386-sun - ;; - sv1) - basic_machine=sv1-cray - os=-unicos - ;; - symmetry) - basic_machine=i386-sequent - os=-dynix - ;; - t3e) - basic_machine=alphaev5-cray - os=-unicos - ;; - t90) - basic_machine=t90-cray - os=-unicos - ;; - tile*) - basic_machine=$basic_machine-unknown - os=-linux-gnu - ;; - tx39) - basic_machine=mipstx39-unknown - ;; - tx39el) - basic_machine=mipstx39el-unknown - ;; - toad1) - basic_machine=pdp10-xkl - os=-tops20 - ;; - tower | tower-32) - basic_machine=m68k-ncr - ;; - tpf) - basic_machine=s390x-ibm - os=-tpf - ;; - udi29k) - basic_machine=a29k-amd - os=-udi - ;; - ultra3) - basic_machine=a29k-nyu - os=-sym1 - ;; - v810 | necv810) - basic_machine=v810-nec - os=-none - ;; - vaxv) - basic_machine=vax-dec - os=-sysv - ;; - vms) - basic_machine=vax-dec - os=-vms - ;; - vpp*|vx|vx-*) - basic_machine=f301-fujitsu - ;; - vxworks960) - basic_machine=i960-wrs - os=-vxworks - ;; - vxworks68) - basic_machine=m68k-wrs - os=-vxworks - ;; - vxworks29k) - basic_machine=a29k-wrs - os=-vxworks - ;; - w65*) - basic_machine=w65-wdc - os=-none - ;; - w89k-*) - basic_machine=hppa1.1-winbond - os=-proelf - ;; - x64) - basic_machine=x86_64-pc - ;; - xbox) - basic_machine=i686-pc - os=-mingw32 - ;; - xps | xps100) - basic_machine=xps100-honeywell - ;; - xscale-* | xscalee[bl]-*) - basic_machine=`echo "$basic_machine" | sed 's/^xscale/arm/'` - ;; - ymp) - basic_machine=ymp-cray - os=-unicos - ;; - none) - basic_machine=none-none - os=-none - ;; - -# Here we handle the default manufacturer of certain CPU types. It is in -# some cases the only manufacturer, in others, it is the most popular. - w89k) - basic_machine=hppa1.1-winbond - ;; - op50n) - basic_machine=hppa1.1-oki - ;; - op60c) - basic_machine=hppa1.1-oki - ;; - romp) - basic_machine=romp-ibm - ;; - mmix) - basic_machine=mmix-knuth - ;; - rs6000) - basic_machine=rs6000-ibm - ;; - vax) - basic_machine=vax-dec - ;; - pdp11) - basic_machine=pdp11-dec - ;; - we32k) - basic_machine=we32k-att - ;; - sh[1234] | sh[24]a | sh[24]aeb | sh[34]eb | sh[1234]le | sh[23]ele) - basic_machine=sh-unknown - ;; - cydra) - basic_machine=cydra-cydrome - ;; - orion) - basic_machine=orion-highlevel - ;; - orion105) - basic_machine=clipper-highlevel - ;; - mac | mpw | mac-mpw) - basic_machine=m68k-apple - ;; - pmac | pmac-mpw) - basic_machine=powerpc-apple - ;; - *-unknown) - # Make sure to match an already-canonicalized machine name. - ;; - *) - echo Invalid configuration \`"$1"\': machine \`"$basic_machine"\' not recognized 1>&2 - exit 1 - ;; -esac - -# Here we canonicalize certain aliases for manufacturers. -case $basic_machine in - *-digital*) - basic_machine=`echo "$basic_machine" | sed 's/digital.*/dec/'` - ;; - *-commodore*) - basic_machine=`echo "$basic_machine" | sed 's/commodore.*/cbm/'` - ;; - *) - ;; -esac - -# Decode manufacturer-specific aliases for certain operating systems. - -if [ x"$os" != x"" ] -then -case $os in - # First match some system type aliases that might get confused - # with valid system types. - # -solaris* is a basic system type, with this one exception. - -auroraux) - os=-auroraux - ;; - -solaris1 | -solaris1.*) - os=`echo $os | sed -e 's|solaris1|sunos4|'` - ;; - -solaris) - os=-solaris2 - ;; - -unixware*) - os=-sysv4.2uw - ;; - -gnu/linux*) - os=`echo $os | sed -e 's|gnu/linux|linux-gnu|'` - ;; - # es1800 is here to avoid being matched by es* (a different OS) - -es1800*) - os=-ose - ;; - # Now accept the basic system types. - # The portable systems comes first. - # Each alternative MUST end in a * to match a version number. - # -sysv* is not here because it comes later, after sysvr4. - -gnu* | -bsd* | -mach* | -minix* | -genix* | -ultrix* | -irix* \ - | -*vms* | -sco* | -esix* | -isc* | -aix* | -cnk* | -sunos | -sunos[34]*\ - | -hpux* | -unos* | -osf* | -luna* | -dgux* | -auroraux* | -solaris* \ - | -sym* | -kopensolaris* | -plan9* \ - | -amigaos* | -amigados* | -msdos* | -newsos* | -unicos* | -aof* \ - | -aos* | -aros* | -cloudabi* | -sortix* \ - | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \ - | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \ - | -hiux* | -knetbsd* | -mirbsd* | -netbsd* \ - | -bitrig* | -openbsd* | -solidbsd* | -libertybsd* \ - | -ekkobsd* | -kfreebsd* | -freebsd* | -riscix* | -lynxos* \ - | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \ - | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \ - | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* | -hcos* \ - | -chorusos* | -chorusrdb* | -cegcc* | -glidix* \ - | -cygwin* | -msys* | -pe* | -psos* | -moss* | -proelf* | -rtems* \ - | -midipix* | -mingw32* | -mingw64* | -linux-gnu* | -linux-android* \ - | -linux-newlib* | -linux-musl* | -linux-uclibc* \ - | -uxpv* | -beos* | -mpeix* | -udk* | -moxiebox* \ - | -interix* | -uwin* | -mks* | -rhapsody* | -darwin* \ - | -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \ - | -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* \ - | -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \ - | -morphos* | -superux* | -rtmk* | -windiss* \ - | -powermax* | -dnix* | -nx6 | -nx7 | -sei* | -dragonfly* \ - | -skyos* | -haiku* | -rdos* | -toppers* | -drops* | -es* \ - | -onefs* | -tirtos* | -phoenix* | -fuchsia* | -redox* | -bme* \ - | -midnightbsd*) - # Remember, each alternative MUST END IN *, to match a version number. - ;; - -qnx*) - case $basic_machine in - x86-* | i*86-*) - ;; - *) - os=-nto$os - ;; - esac - ;; - -nto-qnx*) - ;; - -nto*) - os=`echo $os | sed -e 's|nto|nto-qnx|'` - ;; - -sim | -xray | -os68k* | -v88r* \ - | -windows* | -osx | -abug | -netware* | -os9* \ - | -macos* | -mpw* | -magic* | -mmixware* | -mon960* | -lnews*) - ;; - -mac*) - os=`echo "$os" | sed -e 's|mac|macos|'` - ;; - -linux-dietlibc) - os=-linux-dietlibc - ;; - -linux*) - os=`echo $os | sed -e 's|linux|linux-gnu|'` - ;; - -sunos5*) - os=`echo "$os" | sed -e 's|sunos5|solaris2|'` - ;; - -sunos6*) - os=`echo "$os" | sed -e 's|sunos6|solaris3|'` - ;; - -opened*) - os=-openedition - ;; - -os400*) - os=-os400 - ;; - -wince*) - os=-wince - ;; - -utek*) - os=-bsd - ;; - -dynix*) - os=-bsd - ;; - -acis*) - os=-aos - ;; - -atheos*) - os=-atheos - ;; - -syllable*) - os=-syllable - ;; - -386bsd) - os=-bsd - ;; - -ctix* | -uts*) - os=-sysv - ;; - -nova*) - os=-rtmk-nova - ;; - -ns2) - os=-nextstep2 - ;; - -nsk*) - os=-nsk - ;; - # Preserve the version number of sinix5. - -sinix5.*) - os=`echo $os | sed -e 's|sinix|sysv|'` - ;; - -sinix*) - os=-sysv4 - ;; - -tpf*) - os=-tpf - ;; - -triton*) - os=-sysv3 - ;; - -oss*) - os=-sysv3 - ;; - -svr4*) - os=-sysv4 - ;; - -svr3) - os=-sysv3 - ;; - -sysvr4) - os=-sysv4 - ;; - # This must come after -sysvr4. - -sysv*) - ;; - -ose*) - os=-ose - ;; - -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*) - os=-mint - ;; - -zvmoe) - os=-zvmoe - ;; - -dicos*) - os=-dicos - ;; - -pikeos*) - # Until real need of OS specific support for - # particular features comes up, bare metal - # configurations are quite functional. - case $basic_machine in - arm*) - os=-eabi - ;; - *) - os=-elf - ;; - esac - ;; - -nacl*) - ;; - -ios) - ;; - -none) - ;; - *) - # Get rid of the `-' at the beginning of $os. - os=`echo $os | sed 's/[^-]*-//'` - echo Invalid configuration \`"$1"\': system \`"$os"\' not recognized 1>&2 - exit 1 - ;; -esac -else - -# Here we handle the default operating systems that come with various machines. -# The value should be what the vendor currently ships out the door with their -# machine or put another way, the most popular os provided with the machine. - -# Note that if you're going to try to match "-MANUFACTURER" here (say, -# "-sun"), then you have to tell the case statement up towards the top -# that MANUFACTURER isn't an operating system. Otherwise, code above -# will signal an error saying that MANUFACTURER isn't an operating -# system, and we'll never get to this point. - -case $basic_machine in - score-*) - os=-elf - ;; - spu-*) - os=-elf - ;; - *-acorn) - os=-riscix1.2 - ;; - arm*-rebel) - os=-linux - ;; - arm*-semi) - os=-aout - ;; - c4x-* | tic4x-*) - os=-coff - ;; - c8051-*) - os=-elf - ;; - hexagon-*) - os=-elf - ;; - tic54x-*) - os=-coff - ;; - tic55x-*) - os=-coff - ;; - tic6x-*) - os=-coff - ;; - # This must come before the *-dec entry. - pdp10-*) - os=-tops20 - ;; - pdp11-*) - os=-none - ;; - *-dec | vax-*) - os=-ultrix4.2 - ;; - m68*-apollo) - os=-domain - ;; - i386-sun) - os=-sunos4.0.2 - ;; - m68000-sun) - os=-sunos3 - ;; - m68*-cisco) - os=-aout - ;; - mep-*) - os=-elf - ;; - mips*-cisco) - os=-elf - ;; - mips*-*) - os=-elf - ;; - or32-*) - os=-coff - ;; - *-tti) # must be before sparc entry or we get the wrong os. - os=-sysv3 - ;; - sparc-* | *-sun) - os=-sunos4.1.1 - ;; - pru-*) - os=-elf - ;; - *-be) - os=-beos - ;; - *-ibm) - os=-aix - ;; - *-knuth) - os=-mmixware - ;; - *-wec) - os=-proelf - ;; - *-winbond) - os=-proelf - ;; - *-oki) - os=-proelf - ;; - *-hp) - os=-hpux - ;; - *-hitachi) - os=-hiux - ;; - i860-* | *-att | *-ncr | *-altos | *-motorola | *-convergent) - os=-sysv - ;; - *-cbm) - os=-amigaos - ;; - *-dg) - os=-dgux - ;; - *-dolphin) - os=-sysv3 - ;; - m68k-ccur) - os=-rtu - ;; - m88k-omron*) - os=-luna - ;; - *-next) - os=-nextstep - ;; - *-sequent) - os=-ptx - ;; - *-crds) - os=-unos - ;; - *-ns) - os=-genix - ;; - i370-*) - os=-mvs - ;; - *-gould) - os=-sysv - ;; - *-highlevel) - os=-bsd - ;; - *-encore) - os=-bsd - ;; - *-sgi) - os=-irix - ;; - *-siemens) - os=-sysv4 - ;; - *-masscomp) - os=-rtu - ;; - f30[01]-fujitsu | f700-fujitsu) - os=-uxpv - ;; - *-rom68k) - os=-coff - ;; - *-*bug) - os=-coff - ;; - *-apple) - os=-macos - ;; - *-atari*) - os=-mint - ;; - *) - os=-none - ;; -esac -fi - -# Here we handle the case where we know the os, and the CPU type, but not the -# manufacturer. We pick the logical manufacturer. -vendor=unknown -case $basic_machine in - *-unknown) - case $os in - -riscix*) - vendor=acorn - ;; - -sunos*) - vendor=sun - ;; - -cnk*|-aix*) - vendor=ibm - ;; - -beos*) - vendor=be - ;; - -hpux*) - vendor=hp - ;; - -mpeix*) - vendor=hp - ;; - -hiux*) - vendor=hitachi - ;; - -unos*) - vendor=crds - ;; - -dgux*) - vendor=dg - ;; - -luna*) - vendor=omron - ;; - -genix*) - vendor=ns - ;; - -mvs* | -opened*) - vendor=ibm - ;; - -os400*) - vendor=ibm - ;; - -ptx*) - vendor=sequent - ;; - -tpf*) - vendor=ibm - ;; - -vxsim* | -vxworks* | -windiss*) - vendor=wrs - ;; - -aux*) - vendor=apple - ;; - -hms*) - vendor=hitachi - ;; - -mpw* | -macos*) - vendor=apple - ;; - -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*) - vendor=atari - ;; - -vos*) - vendor=stratus - ;; - esac - basic_machine=`echo "$basic_machine" | sed "s/unknown/$vendor/"` - ;; -esac - -echo "$basic_machine$os" -exit - -# Local variables: -# eval: (add-hook 'before-save-hook 'time-stamp) -# time-stamp-start: "timestamp='" -# time-stamp-format: "%:y-%02m-%02d" -# time-stamp-end: "'" -# End: diff --git a/configure b/configure deleted file mode 100755 index 574bfaeb5..000000000 --- a/configure +++ /dev/null @@ -1,16116 +0,0 @@ -#! /bin/sh -# Guess values for system-dependent variables and create Makefiles. -# Generated by GNU Autoconf 2.69 for libpng 1.6.38.git. -# -# Report bugs to . -# -# -# Copyright (C) 1992-1996, 1998-2012 Free Software Foundation, Inc. -# -# -# This configure script is free software; the Free Software Foundation -# gives unlimited permission to copy, distribute and modify it. -## -------------------- ## -## M4sh Initialization. ## -## -------------------- ## - -# Be more Bourne compatible -DUALCASE=1; export DUALCASE # for MKS sh -if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then : - emulate sh - NULLCMD=: - # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which - # is contrary to our usage. Disable this feature. - alias -g '${1+"$@"}'='"$@"' - setopt NO_GLOB_SUBST -else - case `(set -o) 2>/dev/null` in #( - *posix*) : - set -o posix ;; #( - *) : - ;; -esac -fi - - -as_nl=' -' -export as_nl -# Printing a long string crashes Solaris 7 /usr/bin/printf. -as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' -as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo -as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo -# Prefer a ksh shell builtin over an external printf program on Solaris, -# but without wasting forks for bash or zsh. -if test -z "$BASH_VERSION$ZSH_VERSION" \ - && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then - as_echo='print -r --' - as_echo_n='print -rn --' -elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then - as_echo='printf %s\n' - as_echo_n='printf %s' -else - if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then - as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"' - as_echo_n='/usr/ucb/echo -n' - else - as_echo_body='eval expr "X$1" : "X\\(.*\\)"' - as_echo_n_body='eval - arg=$1; - case $arg in #( - *"$as_nl"*) - expr "X$arg" : "X\\(.*\\)$as_nl"; - arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;; - esac; - expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl" - ' - export as_echo_n_body - as_echo_n='sh -c $as_echo_n_body as_echo' - fi - export as_echo_body - as_echo='sh -c $as_echo_body as_echo' -fi - -# The user is always right. -if test "${PATH_SEPARATOR+set}" != set; then - PATH_SEPARATOR=: - (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && { - (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 || - PATH_SEPARATOR=';' - } -fi - - -# IFS -# We need space, tab and new line, in precisely that order. Quoting is -# there to prevent editors from complaining about space-tab. -# (If _AS_PATH_WALK were called with IFS unset, it would disable word -# splitting by setting IFS to empty value.) -IFS=" "" $as_nl" - -# Find who we are. Look in the path if we contain no directory separator. -as_myself= -case $0 in #(( - *[\\/]* ) as_myself=$0 ;; - *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break - done -IFS=$as_save_IFS - - ;; -esac -# We did not find ourselves, most probably we were run as `sh COMMAND' -# in which case we are not to be found in the path. -if test "x$as_myself" = x; then - as_myself=$0 -fi -if test ! -f "$as_myself"; then - $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 - exit 1 -fi - -# Unset variables that we do not need and which cause bugs (e.g. in -# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1" -# suppresses any "Segmentation fault" message there. '((' could -# trigger a bug in pdksh 5.2.14. -for as_var in BASH_ENV ENV MAIL MAILPATH -do eval test x\${$as_var+set} = xset \ - && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || : -done -PS1='$ ' -PS2='> ' -PS4='+ ' - -# NLS nuisances. -LC_ALL=C -export LC_ALL -LANGUAGE=C -export LANGUAGE - -# CDPATH. -(unset CDPATH) >/dev/null 2>&1 && unset CDPATH - -# Use a proper internal environment variable to ensure we don't fall - # into an infinite loop, continuously re-executing ourselves. - if test x"${_as_can_reexec}" != xno && test "x$CONFIG_SHELL" != x; then - _as_can_reexec=no; export _as_can_reexec; - # We cannot yet assume a decent shell, so we have to provide a -# neutralization value for shells without unset; and this also -# works around shells that cannot unset nonexistent variables. -# Preserve -v and -x to the replacement shell. -BASH_ENV=/dev/null -ENV=/dev/null -(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV -case $- in # (((( - *v*x* | *x*v* ) as_opts=-vx ;; - *v* ) as_opts=-v ;; - *x* ) as_opts=-x ;; - * ) as_opts= ;; -esac -exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"} -# Admittedly, this is quite paranoid, since all the known shells bail -# out after a failed `exec'. -$as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2 -as_fn_exit 255 - fi - # We don't want this to propagate to other subprocesses. - { _as_can_reexec=; unset _as_can_reexec;} -if test "x$CONFIG_SHELL" = x; then - as_bourne_compatible="if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then : - emulate sh - NULLCMD=: - # Pre-4.2 versions of Zsh do word splitting on \${1+\"\$@\"}, which - # is contrary to our usage. Disable this feature. - alias -g '\${1+\"\$@\"}'='\"\$@\"' - setopt NO_GLOB_SUBST -else - case \`(set -o) 2>/dev/null\` in #( - *posix*) : - set -o posix ;; #( - *) : - ;; -esac -fi -" - as_required="as_fn_return () { (exit \$1); } -as_fn_success () { as_fn_return 0; } -as_fn_failure () { as_fn_return 1; } -as_fn_ret_success () { return 0; } -as_fn_ret_failure () { return 1; } - -exitcode=0 -as_fn_success || { exitcode=1; echo as_fn_success failed.; } -as_fn_failure && { exitcode=1; echo as_fn_failure succeeded.; } -as_fn_ret_success || { exitcode=1; echo as_fn_ret_success failed.; } -as_fn_ret_failure && { exitcode=1; echo as_fn_ret_failure succeeded.; } -if ( set x; as_fn_ret_success y && test x = \"\$1\" ); then : - -else - exitcode=1; echo positional parameters were not saved. -fi -test x\$exitcode = x0 || exit 1 -test -x / || exit 1" - as_suggested=" as_lineno_1=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_1a=\$LINENO - as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO - eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" && - test \"x\`expr \$as_lineno_1'\$as_run' + 1\`\" = \"x\$as_lineno_2'\$as_run'\"' || exit 1 -test \$(( 1 + 1 )) = 2 || exit 1 - - test -n \"\${ZSH_VERSION+set}\${BASH_VERSION+set}\" || ( - ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' - ECHO=\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO - ECHO=\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO - PATH=/empty FPATH=/empty; export PATH FPATH - test \"X\`printf %s \$ECHO\`\" = \"X\$ECHO\" \\ - || test \"X\`print -r -- \$ECHO\`\" = \"X\$ECHO\" ) || exit 1" - if (eval "$as_required") 2>/dev/null; then : - as_have_required=yes -else - as_have_required=no -fi - if test x$as_have_required = xyes && (eval "$as_suggested") 2>/dev/null; then : - -else - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -as_found=false -for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - as_found=: - case $as_dir in #( - /*) - for as_base in sh bash ksh sh5; do - # Try only shells that exist, to save several forks. - as_shell=$as_dir/$as_base - if { test -f "$as_shell" || test -f "$as_shell.exe"; } && - { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$as_shell"; } 2>/dev/null; then : - CONFIG_SHELL=$as_shell as_have_required=yes - if { $as_echo "$as_bourne_compatible""$as_suggested" | as_run=a "$as_shell"; } 2>/dev/null; then : - break 2 -fi -fi - done;; - esac - as_found=false -done -$as_found || { if { test -f "$SHELL" || test -f "$SHELL.exe"; } && - { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$SHELL"; } 2>/dev/null; then : - CONFIG_SHELL=$SHELL as_have_required=yes -fi; } -IFS=$as_save_IFS - - - if test "x$CONFIG_SHELL" != x; then : - export CONFIG_SHELL - # We cannot yet assume a decent shell, so we have to provide a -# neutralization value for shells without unset; and this also -# works around shells that cannot unset nonexistent variables. -# Preserve -v and -x to the replacement shell. -BASH_ENV=/dev/null -ENV=/dev/null -(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV -case $- in # (((( - *v*x* | *x*v* ) as_opts=-vx ;; - *v* ) as_opts=-v ;; - *x* ) as_opts=-x ;; - * ) as_opts= ;; -esac -exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"} -# Admittedly, this is quite paranoid, since all the known shells bail -# out after a failed `exec'. -$as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2 -exit 255 -fi - - if test x$as_have_required = xno; then : - $as_echo "$0: This script requires a shell more modern than all" - $as_echo "$0: the shells that I found on your system." - if test x${ZSH_VERSION+set} = xset ; then - $as_echo "$0: In particular, zsh $ZSH_VERSION has bugs and should" - $as_echo "$0: be upgraded to zsh 4.3.4 or later." - else - $as_echo "$0: Please tell bug-autoconf@gnu.org and -$0: png-mng-implement@lists.sourceforge.net about your -$0: system, including any error possibly output before this -$0: message. Then install a modern shell, or manually run -$0: the script under such a shell if you do have one." - fi - exit 1 -fi -fi -fi -SHELL=${CONFIG_SHELL-/bin/sh} -export SHELL -# Unset more variables known to interfere with behavior of common tools. -CLICOLOR_FORCE= GREP_OPTIONS= -unset CLICOLOR_FORCE GREP_OPTIONS - -## --------------------- ## -## M4sh Shell Functions. ## -## --------------------- ## -# as_fn_unset VAR -# --------------- -# Portably unset VAR. -as_fn_unset () -{ - { eval $1=; unset $1;} -} -as_unset=as_fn_unset - -# as_fn_set_status STATUS -# ----------------------- -# Set $? to STATUS, without forking. -as_fn_set_status () -{ - return $1 -} # as_fn_set_status - -# as_fn_exit STATUS -# ----------------- -# Exit the shell with STATUS, even in a "trap 0" or "set -e" context. -as_fn_exit () -{ - set +e - as_fn_set_status $1 - exit $1 -} # as_fn_exit - -# as_fn_mkdir_p -# ------------- -# Create "$as_dir" as a directory, including parents if necessary. -as_fn_mkdir_p () -{ - - case $as_dir in #( - -*) as_dir=./$as_dir;; - esac - test -d "$as_dir" || eval $as_mkdir_p || { - as_dirs= - while :; do - case $as_dir in #( - *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( - *) as_qdir=$as_dir;; - esac - as_dirs="'$as_qdir' $as_dirs" - as_dir=`$as_dirname -- "$as_dir" || -$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$as_dir" : 'X\(//\)[^/]' \| \ - X"$as_dir" : 'X\(//\)$' \| \ - X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X"$as_dir" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - test -d "$as_dir" && break - done - test -z "$as_dirs" || eval "mkdir $as_dirs" - } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir" - - -} # as_fn_mkdir_p - -# as_fn_executable_p FILE -# ----------------------- -# Test if FILE is an executable regular file. -as_fn_executable_p () -{ - test -f "$1" && test -x "$1" -} # as_fn_executable_p -# as_fn_append VAR VALUE -# ---------------------- -# Append the text in VALUE to the end of the definition contained in VAR. Take -# advantage of any shell optimizations that allow amortized linear growth over -# repeated appends, instead of the typical quadratic growth present in naive -# implementations. -if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then : - eval 'as_fn_append () - { - eval $1+=\$2 - }' -else - as_fn_append () - { - eval $1=\$$1\$2 - } -fi # as_fn_append - -# as_fn_arith ARG... -# ------------------ -# Perform arithmetic evaluation on the ARGs, and store the result in the -# global $as_val. Take advantage of shells that can avoid forks. The arguments -# must be portable across $(()) and expr. -if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then : - eval 'as_fn_arith () - { - as_val=$(( $* )) - }' -else - as_fn_arith () - { - as_val=`expr "$@" || test $? -eq 1` - } -fi # as_fn_arith - - -# as_fn_error STATUS ERROR [LINENO LOG_FD] -# ---------------------------------------- -# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are -# provided, also output the error to LOG_FD, referencing LINENO. Then exit the -# script with STATUS, using 1 if that was 0. -as_fn_error () -{ - as_status=$1; test $as_status -eq 0 && as_status=1 - if test "$4"; then - as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4 - fi - $as_echo "$as_me: error: $2" >&2 - as_fn_exit $as_status -} # as_fn_error - -if expr a : '\(a\)' >/dev/null 2>&1 && - test "X`expr 00001 : '.*\(...\)'`" = X001; then - as_expr=expr -else - as_expr=false -fi - -if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then - as_basename=basename -else - as_basename=false -fi - -if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then - as_dirname=dirname -else - as_dirname=false -fi - -as_me=`$as_basename -- "$0" || -$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ - X"$0" : 'X\(//\)$' \| \ - X"$0" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X/"$0" | - sed '/^.*\/\([^/][^/]*\)\/*$/{ - s//\1/ - q - } - /^X\/\(\/\/\)$/{ - s//\1/ - q - } - /^X\/\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - -# Avoid depending upon Character Ranges. -as_cr_letters='abcdefghijklmnopqrstuvwxyz' -as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' -as_cr_Letters=$as_cr_letters$as_cr_LETTERS -as_cr_digits='0123456789' -as_cr_alnum=$as_cr_Letters$as_cr_digits - - - as_lineno_1=$LINENO as_lineno_1a=$LINENO - as_lineno_2=$LINENO as_lineno_2a=$LINENO - eval 'test "x$as_lineno_1'$as_run'" != "x$as_lineno_2'$as_run'" && - test "x`expr $as_lineno_1'$as_run' + 1`" = "x$as_lineno_2'$as_run'"' || { - # Blame Lee E. McMahon (1931-1989) for sed's syntax. :-) - sed -n ' - p - /[$]LINENO/= - ' <$as_myself | - sed ' - s/[$]LINENO.*/&-/ - t lineno - b - :lineno - N - :loop - s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/ - t loop - s/-\n.*// - ' >$as_me.lineno && - chmod +x "$as_me.lineno" || - { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2; as_fn_exit 1; } - - # If we had to re-execute with $CONFIG_SHELL, we're ensured to have - # already done that, so ensure we don't try to do so again and fall - # in an infinite loop. This has already happened in practice. - _as_can_reexec=no; export _as_can_reexec - # Don't try to exec as it changes $[0], causing all sort of problems - # (the dirname of $[0] is not the place where we might find the - # original and so on. Autoconf is especially sensitive to this). - . "./$as_me.lineno" - # Exit status is that of the last command. - exit -} - -ECHO_C= ECHO_N= ECHO_T= -case `echo -n x` in #((((( --n*) - case `echo 'xy\c'` in - *c*) ECHO_T=' ';; # ECHO_T is single tab character. - xy) ECHO_C='\c';; - *) echo `echo ksh88 bug on AIX 6.1` > /dev/null - ECHO_T=' ';; - esac;; -*) - ECHO_N='-n';; -esac - -rm -f conf$$ conf$$.exe conf$$.file -if test -d conf$$.dir; then - rm -f conf$$.dir/conf$$.file -else - rm -f conf$$.dir - mkdir conf$$.dir 2>/dev/null -fi -if (echo >conf$$.file) 2>/dev/null; then - if ln -s conf$$.file conf$$ 2>/dev/null; then - as_ln_s='ln -s' - # ... but there are two gotchas: - # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. - # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. - # In both cases, we have to default to `cp -pR'. - ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || - as_ln_s='cp -pR' - elif ln conf$$.file conf$$ 2>/dev/null; then - as_ln_s=ln - else - as_ln_s='cp -pR' - fi -else - as_ln_s='cp -pR' -fi -rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file -rmdir conf$$.dir 2>/dev/null - -if mkdir -p . 2>/dev/null; then - as_mkdir_p='mkdir -p "$as_dir"' -else - test -d ./-p && rmdir ./-p - as_mkdir_p=false -fi - -as_test_x='test -x' -as_executable_p=as_fn_executable_p - -# Sed expression to map a string onto a valid CPP name. -as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" - -# Sed expression to map a string onto a valid variable name. -as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" - -SHELL=${CONFIG_SHELL-/bin/sh} - - -test -n "$DJDIR" || exec 7<&0 &1 - -# Name of the host. -# hostname on some systems (SVR3.2, old GNU/Linux) returns a bogus exit status, -# so uname gets run too. -ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q` - -# -# Initializations. -# -ac_default_prefix=/usr/local -ac_clean_files= -ac_config_libobj_dir=. -LIBOBJS= -cross_compiling=no -subdirs= -MFLAGS= -MAKEFLAGS= - -# Identity of this package. -PACKAGE_NAME='libpng' -PACKAGE_TARNAME='libpng' -PACKAGE_VERSION='1.6.38.git' -PACKAGE_STRING='libpng 1.6.38.git' -PACKAGE_BUGREPORT='png-mng-implement@lists.sourceforge.net' -PACKAGE_URL='' - -ac_unique_file="pngget.c" -# Factoring default headers for most tests. -ac_includes_default="\ -#include -#ifdef HAVE_SYS_TYPES_H -# include -#endif -#ifdef HAVE_SYS_STAT_H -# include -#endif -#ifdef STDC_HEADERS -# include -# include -#else -# ifdef HAVE_STDLIB_H -# include -# endif -#endif -#ifdef HAVE_STRING_H -# if !defined STDC_HEADERS && defined HAVE_MEMORY_H -# include -# endif -# include -#endif -#ifdef HAVE_STRINGS_H -# include -#endif -#ifdef HAVE_INTTYPES_H -# include -#endif -#ifdef HAVE_STDINT_H -# include -#endif -#ifdef HAVE_UNISTD_H -# include -#endif" - -ac_subst_vars='am__EXEEXT_FALSE -am__EXEEXT_TRUE -LTLIBOBJS -PNG_POWERPC_VSX_FALSE -PNG_POWERPC_VSX_TRUE -PNG_INTEL_SSE_FALSE -PNG_INTEL_SSE_TRUE -PNG_MIPS_MSA_FALSE -PNG_MIPS_MSA_TRUE -PNG_ARM_NEON_FALSE -PNG_ARM_NEON_TRUE -DO_INSTALL_LIBPNG_CONFIG_FALSE -DO_INSTALL_LIBPNG_CONFIG_TRUE -DO_INSTALL_LIBPNG_PC_FALSE -DO_INSTALL_LIBPNG_PC_TRUE -DO_INSTALL_LINKS_FALSE -DO_INSTALL_LINKS_TRUE -DO_PNG_PREFIX_FALSE -DO_PNG_PREFIX_TRUE -PNG_PREFIX -binconfigs -pkgconfigdir -PNGLIB_RELEASE -PNGLIB_MINOR -PNGLIB_MAJOR -PNGLIB_VERSION -SYMBOL_PREFIX -HAVE_LD_VERSION_SCRIPT_FALSE -HAVE_LD_VERSION_SCRIPT_TRUE -HAVE_SOLARIS_LD_FALSE -HAVE_SOLARIS_LD_TRUE -HAVE_CLOCK_GETTIME_FALSE -HAVE_CLOCK_GETTIME_TRUE -LIBOBJS -POW_LIB -PNG_COPTS -DFNCPP -LT_SYS_LIBRARY_PATH -OTOOL64 -OTOOL -LIPO -NMEDIT -DSYMUTIL -MANIFEST_TOOL -RANLIB -ac_ct_AR -AR -NM -ac_ct_DUMPBIN -DUMPBIN -LIBTOOL -OBJDUMP -DLLTOOL -AS -LN_S -CPP -LD -FGREP -EGREP -GREP -SED -host_os -host_vendor -host_cpu -host -build_os -build_vendor -build_cpu -build -am__fastdepCCAS_FALSE -am__fastdepCCAS_TRUE -CCASDEPMODE -CCASFLAGS -CCAS -am__fastdepCC_FALSE -am__fastdepCC_TRUE -CCDEPMODE -am__nodep -AMDEPBACKSLASH -AMDEP_FALSE -AMDEP_TRUE -am__include -DEPDIR -OBJEXT -EXEEXT -ac_ct_CC -CPPFLAGS -LDFLAGS -CFLAGS -CC -MAINT -MAINTAINER_MODE_FALSE -MAINTAINER_MODE_TRUE -AM_BACKSLASH -AM_DEFAULT_VERBOSITY -AM_DEFAULT_V -AM_V -am__untar -am__tar -AMTAR -am__leading_dot -SET_MAKE -AWK -mkdir_p -MKDIR_P -INSTALL_STRIP_PROGRAM -STRIP -install_sh -MAKEINFO -AUTOHEADER -AUTOMAKE -AUTOCONF -ACLOCAL -VERSION -PACKAGE -CYGPATH_W -am__isrc -INSTALL_DATA -INSTALL_SCRIPT -INSTALL_PROGRAM -target_alias -host_alias -build_alias -LIBS -ECHO_T -ECHO_N -ECHO_C -DEFS -mandir -localedir -libdir -psdir -pdfdir -dvidir -htmldir -infodir -docdir -oldincludedir -includedir -localstatedir -sharedstatedir -sysconfdir -datadir -datarootdir -libexecdir -sbindir -bindir -program_transform_name -prefix -exec_prefix -PACKAGE_URL -PACKAGE_BUGREPORT -PACKAGE_STRING -PACKAGE_VERSION -PACKAGE_TARNAME -PACKAGE_NAME -PATH_SEPARATOR -SHELL -am__quote' -ac_subst_files='' -ac_user_opts=' -enable_option_checking -enable_silent_rules -enable_maintainer_mode -enable_dependency_tracking -with_gnu_ld -enable_shared -enable_static -with_pic -enable_fast_install -with_aix_soname -with_sysroot -enable_libtool_lock -enable_werror -with_zlib_prefix -with_pkgconfigdir -with_binconfigs -with_libpng_prefix -enable_unversioned_links -enable_unversioned_libpng_pc -enable_unversioned_libpng_config -enable_hardware_optimizations -enable_arm_neon -enable_mips_msa -enable_intel_sse -enable_powerpc_vsx -' - ac_precious_vars='build_alias -host_alias -target_alias -CC -CFLAGS -LDFLAGS -LIBS -CPPFLAGS -CCAS -CCASFLAGS -CPP -LT_SYS_LIBRARY_PATH -PNG_COPTS' - - -# Initialize some variables set by options. -ac_init_help= -ac_init_version=false -ac_unrecognized_opts= -ac_unrecognized_sep= -# The variables have the same names as the options, with -# dashes changed to underlines. -cache_file=/dev/null -exec_prefix=NONE -no_create= -no_recursion= -prefix=NONE -program_prefix=NONE -program_suffix=NONE -program_transform_name=s,x,x, -silent= -site= -srcdir= -verbose= -x_includes=NONE -x_libraries=NONE - -# Installation directory options. -# These are left unexpanded so users can "make install exec_prefix=/foo" -# and all the variables that are supposed to be based on exec_prefix -# by default will actually change. -# Use braces instead of parens because sh, perl, etc. also accept them. -# (The list follows the same order as the GNU Coding Standards.) -bindir='${exec_prefix}/bin' -sbindir='${exec_prefix}/sbin' -libexecdir='${exec_prefix}/libexec' -datarootdir='${prefix}/share' -datadir='${datarootdir}' -sysconfdir='${prefix}/etc' -sharedstatedir='${prefix}/com' -localstatedir='${prefix}/var' -includedir='${prefix}/include' -oldincludedir='/usr/include' -docdir='${datarootdir}/doc/${PACKAGE_TARNAME}' -infodir='${datarootdir}/info' -htmldir='${docdir}' -dvidir='${docdir}' -pdfdir='${docdir}' -psdir='${docdir}' -libdir='${exec_prefix}/lib' -localedir='${datarootdir}/locale' -mandir='${datarootdir}/man' - -ac_prev= -ac_dashdash= -for ac_option -do - # If the previous option needs an argument, assign it. - if test -n "$ac_prev"; then - eval $ac_prev=\$ac_option - ac_prev= - continue - fi - - case $ac_option in - *=?*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;; - *=) ac_optarg= ;; - *) ac_optarg=yes ;; - esac - - # Accept the important Cygnus configure options, so we can diagnose typos. - - case $ac_dashdash$ac_option in - --) - ac_dashdash=yes ;; - - -bindir | --bindir | --bindi | --bind | --bin | --bi) - ac_prev=bindir ;; - -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*) - bindir=$ac_optarg ;; - - -build | --build | --buil | --bui | --bu) - ac_prev=build_alias ;; - -build=* | --build=* | --buil=* | --bui=* | --bu=*) - build_alias=$ac_optarg ;; - - -cache-file | --cache-file | --cache-fil | --cache-fi \ - | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c) - ac_prev=cache_file ;; - -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \ - | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*) - cache_file=$ac_optarg ;; - - --config-cache | -C) - cache_file=config.cache ;; - - -datadir | --datadir | --datadi | --datad) - ac_prev=datadir ;; - -datadir=* | --datadir=* | --datadi=* | --datad=*) - datadir=$ac_optarg ;; - - -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \ - | --dataroo | --dataro | --datar) - ac_prev=datarootdir ;; - -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \ - | --dataroot=* | --dataroo=* | --dataro=* | --datar=*) - datarootdir=$ac_optarg ;; - - -disable-* | --disable-*) - ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'` - # Reject names that are not valid shell variable names. - expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && - as_fn_error $? "invalid feature name: $ac_useropt" - ac_useropt_orig=$ac_useropt - ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` - case $ac_user_opts in - *" -"enable_$ac_useropt" -"*) ;; - *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--disable-$ac_useropt_orig" - ac_unrecognized_sep=', ';; - esac - eval enable_$ac_useropt=no ;; - - -docdir | --docdir | --docdi | --doc | --do) - ac_prev=docdir ;; - -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*) - docdir=$ac_optarg ;; - - -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv) - ac_prev=dvidir ;; - -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*) - dvidir=$ac_optarg ;; - - -enable-* | --enable-*) - ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'` - # Reject names that are not valid shell variable names. - expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && - as_fn_error $? "invalid feature name: $ac_useropt" - ac_useropt_orig=$ac_useropt - ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` - case $ac_user_opts in - *" -"enable_$ac_useropt" -"*) ;; - *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--enable-$ac_useropt_orig" - ac_unrecognized_sep=', ';; - esac - eval enable_$ac_useropt=\$ac_optarg ;; - - -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \ - | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \ - | --exec | --exe | --ex) - ac_prev=exec_prefix ;; - -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \ - | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \ - | --exec=* | --exe=* | --ex=*) - exec_prefix=$ac_optarg ;; - - -gas | --gas | --ga | --g) - # Obsolete; use --with-gas. - with_gas=yes ;; - - -help | --help | --hel | --he | -h) - ac_init_help=long ;; - -help=r* | --help=r* | --hel=r* | --he=r* | -hr*) - ac_init_help=recursive ;; - -help=s* | --help=s* | --hel=s* | --he=s* | -hs*) - ac_init_help=short ;; - - -host | --host | --hos | --ho) - ac_prev=host_alias ;; - -host=* | --host=* | --hos=* | --ho=*) - host_alias=$ac_optarg ;; - - -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht) - ac_prev=htmldir ;; - -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \ - | --ht=*) - htmldir=$ac_optarg ;; - - -includedir | --includedir | --includedi | --included | --include \ - | --includ | --inclu | --incl | --inc) - ac_prev=includedir ;; - -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \ - | --includ=* | --inclu=* | --incl=* | --inc=*) - includedir=$ac_optarg ;; - - -infodir | --infodir | --infodi | --infod | --info | --inf) - ac_prev=infodir ;; - -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*) - infodir=$ac_optarg ;; - - -libdir | --libdir | --libdi | --libd) - ac_prev=libdir ;; - -libdir=* | --libdir=* | --libdi=* | --libd=*) - libdir=$ac_optarg ;; - - -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \ - | --libexe | --libex | --libe) - ac_prev=libexecdir ;; - -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \ - | --libexe=* | --libex=* | --libe=*) - libexecdir=$ac_optarg ;; - - -localedir | --localedir | --localedi | --localed | --locale) - ac_prev=localedir ;; - -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*) - localedir=$ac_optarg ;; - - -localstatedir | --localstatedir | --localstatedi | --localstated \ - | --localstate | --localstat | --localsta | --localst | --locals) - ac_prev=localstatedir ;; - -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \ - | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*) - localstatedir=$ac_optarg ;; - - -mandir | --mandir | --mandi | --mand | --man | --ma | --m) - ac_prev=mandir ;; - -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*) - mandir=$ac_optarg ;; - - -nfp | --nfp | --nf) - # Obsolete; use --without-fp. - with_fp=no ;; - - -no-create | --no-create | --no-creat | --no-crea | --no-cre \ - | --no-cr | --no-c | -n) - no_create=yes ;; - - -no-recursion | --no-recursion | --no-recursio | --no-recursi \ - | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) - no_recursion=yes ;; - - -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \ - | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \ - | --oldin | --oldi | --old | --ol | --o) - ac_prev=oldincludedir ;; - -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \ - | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \ - | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*) - oldincludedir=$ac_optarg ;; - - -prefix | --prefix | --prefi | --pref | --pre | --pr | --p) - ac_prev=prefix ;; - -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*) - prefix=$ac_optarg ;; - - -program-prefix | --program-prefix | --program-prefi | --program-pref \ - | --program-pre | --program-pr | --program-p) - ac_prev=program_prefix ;; - -program-prefix=* | --program-prefix=* | --program-prefi=* \ - | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*) - program_prefix=$ac_optarg ;; - - -program-suffix | --program-suffix | --program-suffi | --program-suff \ - | --program-suf | --program-su | --program-s) - ac_prev=program_suffix ;; - -program-suffix=* | --program-suffix=* | --program-suffi=* \ - | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*) - program_suffix=$ac_optarg ;; - - -program-transform-name | --program-transform-name \ - | --program-transform-nam | --program-transform-na \ - | --program-transform-n | --program-transform- \ - | --program-transform | --program-transfor \ - | --program-transfo | --program-transf \ - | --program-trans | --program-tran \ - | --progr-tra | --program-tr | --program-t) - ac_prev=program_transform_name ;; - -program-transform-name=* | --program-transform-name=* \ - | --program-transform-nam=* | --program-transform-na=* \ - | --program-transform-n=* | --program-transform-=* \ - | --program-transform=* | --program-transfor=* \ - | --program-transfo=* | --program-transf=* \ - | --program-trans=* | --program-tran=* \ - | --progr-tra=* | --program-tr=* | --program-t=*) - program_transform_name=$ac_optarg ;; - - -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd) - ac_prev=pdfdir ;; - -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*) - pdfdir=$ac_optarg ;; - - -psdir | --psdir | --psdi | --psd | --ps) - ac_prev=psdir ;; - -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*) - psdir=$ac_optarg ;; - - -q | -quiet | --quiet | --quie | --qui | --qu | --q \ - | -silent | --silent | --silen | --sile | --sil) - silent=yes ;; - - -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb) - ac_prev=sbindir ;; - -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \ - | --sbi=* | --sb=*) - sbindir=$ac_optarg ;; - - -sharedstatedir | --sharedstatedir | --sharedstatedi \ - | --sharedstated | --sharedstate | --sharedstat | --sharedsta \ - | --sharedst | --shareds | --shared | --share | --shar \ - | --sha | --sh) - ac_prev=sharedstatedir ;; - -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \ - | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \ - | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \ - | --sha=* | --sh=*) - sharedstatedir=$ac_optarg ;; - - -site | --site | --sit) - ac_prev=site ;; - -site=* | --site=* | --sit=*) - site=$ac_optarg ;; - - -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) - ac_prev=srcdir ;; - -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) - srcdir=$ac_optarg ;; - - -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \ - | --syscon | --sysco | --sysc | --sys | --sy) - ac_prev=sysconfdir ;; - -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \ - | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*) - sysconfdir=$ac_optarg ;; - - -target | --target | --targe | --targ | --tar | --ta | --t) - ac_prev=target_alias ;; - -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*) - target_alias=$ac_optarg ;; - - -v | -verbose | --verbose | --verbos | --verbo | --verb) - verbose=yes ;; - - -version | --version | --versio | --versi | --vers | -V) - ac_init_version=: ;; - - -with-* | --with-*) - ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'` - # Reject names that are not valid shell variable names. - expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && - as_fn_error $? "invalid package name: $ac_useropt" - ac_useropt_orig=$ac_useropt - ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` - case $ac_user_opts in - *" -"with_$ac_useropt" -"*) ;; - *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--with-$ac_useropt_orig" - ac_unrecognized_sep=', ';; - esac - eval with_$ac_useropt=\$ac_optarg ;; - - -without-* | --without-*) - ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'` - # Reject names that are not valid shell variable names. - expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && - as_fn_error $? "invalid package name: $ac_useropt" - ac_useropt_orig=$ac_useropt - ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` - case $ac_user_opts in - *" -"with_$ac_useropt" -"*) ;; - *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--without-$ac_useropt_orig" - ac_unrecognized_sep=', ';; - esac - eval with_$ac_useropt=no ;; - - --x) - # Obsolete; use --with-x. - with_x=yes ;; - - -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \ - | --x-incl | --x-inc | --x-in | --x-i) - ac_prev=x_includes ;; - -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \ - | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*) - x_includes=$ac_optarg ;; - - -x-libraries | --x-libraries | --x-librarie | --x-librari \ - | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l) - ac_prev=x_libraries ;; - -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \ - | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*) - x_libraries=$ac_optarg ;; - - -*) as_fn_error $? "unrecognized option: \`$ac_option' -Try \`$0 --help' for more information" - ;; - - *=*) - ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='` - # Reject names that are not valid shell variable names. - case $ac_envvar in #( - '' | [0-9]* | *[!_$as_cr_alnum]* ) - as_fn_error $? "invalid variable name: \`$ac_envvar'" ;; - esac - eval $ac_envvar=\$ac_optarg - export $ac_envvar ;; - - *) - # FIXME: should be removed in autoconf 3.0. - $as_echo "$as_me: WARNING: you should use --build, --host, --target" >&2 - expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null && - $as_echo "$as_me: WARNING: invalid host type: $ac_option" >&2 - : "${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}" - ;; - - esac -done - -if test -n "$ac_prev"; then - ac_option=--`echo $ac_prev | sed 's/_/-/g'` - as_fn_error $? "missing argument to $ac_option" -fi - -if test -n "$ac_unrecognized_opts"; then - case $enable_option_checking in - no) ;; - fatal) as_fn_error $? "unrecognized options: $ac_unrecognized_opts" ;; - *) $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;; - esac -fi - -# Check all directory arguments for consistency. -for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \ - datadir sysconfdir sharedstatedir localstatedir includedir \ - oldincludedir docdir infodir htmldir dvidir pdfdir psdir \ - libdir localedir mandir -do - eval ac_val=\$$ac_var - # Remove trailing slashes. - case $ac_val in - */ ) - ac_val=`expr "X$ac_val" : 'X\(.*[^/]\)' \| "X$ac_val" : 'X\(.*\)'` - eval $ac_var=\$ac_val;; - esac - # Be sure to have absolute directory names. - case $ac_val in - [\\/$]* | ?:[\\/]* ) continue;; - NONE | '' ) case $ac_var in *prefix ) continue;; esac;; - esac - as_fn_error $? "expected an absolute directory name for --$ac_var: $ac_val" -done - -# There might be people who depend on the old broken behavior: `$host' -# used to hold the argument of --host etc. -# FIXME: To remove some day. -build=$build_alias -host=$host_alias -target=$target_alias - -# FIXME: To remove some day. -if test "x$host_alias" != x; then - if test "x$build_alias" = x; then - cross_compiling=maybe - elif test "x$build_alias" != "x$host_alias"; then - cross_compiling=yes - fi -fi - -ac_tool_prefix= -test -n "$host_alias" && ac_tool_prefix=$host_alias- - -test "$silent" = yes && exec 6>/dev/null - - -ac_pwd=`pwd` && test -n "$ac_pwd" && -ac_ls_di=`ls -di .` && -ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` || - as_fn_error $? "working directory cannot be determined" -test "X$ac_ls_di" = "X$ac_pwd_ls_di" || - as_fn_error $? "pwd does not report name of working directory" - - -# Find the source files, if location was not specified. -if test -z "$srcdir"; then - ac_srcdir_defaulted=yes - # Try the directory containing this script, then the parent directory. - ac_confdir=`$as_dirname -- "$as_myself" || -$as_expr X"$as_myself" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$as_myself" : 'X\(//\)[^/]' \| \ - X"$as_myself" : 'X\(//\)$' \| \ - X"$as_myself" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X"$as_myself" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - srcdir=$ac_confdir - if test ! -r "$srcdir/$ac_unique_file"; then - srcdir=.. - fi -else - ac_srcdir_defaulted=no -fi -if test ! -r "$srcdir/$ac_unique_file"; then - test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .." - as_fn_error $? "cannot find sources ($ac_unique_file) in $srcdir" -fi -ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work" -ac_abs_confdir=`( - cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error $? "$ac_msg" - pwd)` -# When building in place, set srcdir=. -if test "$ac_abs_confdir" = "$ac_pwd"; then - srcdir=. -fi -# Remove unnecessary trailing slashes from srcdir. -# Double slashes in file names in object file debugging info -# mess up M-x gdb in Emacs. -case $srcdir in -*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;; -esac -for ac_var in $ac_precious_vars; do - eval ac_env_${ac_var}_set=\${${ac_var}+set} - eval ac_env_${ac_var}_value=\$${ac_var} - eval ac_cv_env_${ac_var}_set=\${${ac_var}+set} - eval ac_cv_env_${ac_var}_value=\$${ac_var} -done - -# -# Report the --help message. -# -if test "$ac_init_help" = "long"; then - # Omit some internal or obsolete options to make the list less imposing. - # This message is too long to be a string in the A/UX 3.1 sh. - cat <<_ACEOF -\`configure' configures libpng 1.6.38.git to adapt to many kinds of systems. - -Usage: $0 [OPTION]... [VAR=VALUE]... - -To assign environment variables (e.g., CC, CFLAGS...), specify them as -VAR=VALUE. See below for descriptions of some of the useful variables. - -Defaults for the options are specified in brackets. - -Configuration: - -h, --help display this help and exit - --help=short display options specific to this package - --help=recursive display the short help of all the included packages - -V, --version display version information and exit - -q, --quiet, --silent do not print \`checking ...' messages - --cache-file=FILE cache test results in FILE [disabled] - -C, --config-cache alias for \`--cache-file=config.cache' - -n, --no-create do not create output files - --srcdir=DIR find the sources in DIR [configure dir or \`..'] - -Installation directories: - --prefix=PREFIX install architecture-independent files in PREFIX - [$ac_default_prefix] - --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX - [PREFIX] - -By default, \`make install' will install all the files in -\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify -an installation prefix other than \`$ac_default_prefix' using \`--prefix', -for instance \`--prefix=\$HOME'. - -For better control, use the options below. - -Fine tuning of the installation directories: - --bindir=DIR user executables [EPREFIX/bin] - --sbindir=DIR system admin executables [EPREFIX/sbin] - --libexecdir=DIR program executables [EPREFIX/libexec] - --sysconfdir=DIR read-only single-machine data [PREFIX/etc] - --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com] - --localstatedir=DIR modifiable single-machine data [PREFIX/var] - --libdir=DIR object code libraries [EPREFIX/lib] - --includedir=DIR C header files [PREFIX/include] - --oldincludedir=DIR C header files for non-gcc [/usr/include] - --datarootdir=DIR read-only arch.-independent data root [PREFIX/share] - --datadir=DIR read-only architecture-independent data [DATAROOTDIR] - --infodir=DIR info documentation [DATAROOTDIR/info] - --localedir=DIR locale-dependent data [DATAROOTDIR/locale] - --mandir=DIR man documentation [DATAROOTDIR/man] - --docdir=DIR documentation root [DATAROOTDIR/doc/libpng] - --htmldir=DIR html documentation [DOCDIR] - --dvidir=DIR dvi documentation [DOCDIR] - --pdfdir=DIR pdf documentation [DOCDIR] - --psdir=DIR ps documentation [DOCDIR] -_ACEOF - - cat <<\_ACEOF - -Program names: - --program-prefix=PREFIX prepend PREFIX to installed program names - --program-suffix=SUFFIX append SUFFIX to installed program names - --program-transform-name=PROGRAM run sed PROGRAM on installed program names - -System types: - --build=BUILD configure for building on BUILD [guessed] - --host=HOST cross-compile to build programs to run on HOST [BUILD] -_ACEOF -fi - -if test -n "$ac_init_help"; then - case $ac_init_help in - short | recursive ) echo "Configuration of libpng 1.6.38.git:";; - esac - cat <<\_ACEOF - -Optional Features: - --disable-option-checking ignore unrecognized --enable/--with options - --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no) - --enable-FEATURE[=ARG] include FEATURE [ARG=yes] - --enable-silent-rules less verbose build output (undo: "make V=1") - --disable-silent-rules verbose build output (undo: "make V=0") - --enable-maintainer-mode - enable make rules and dependencies not useful (and - sometimes confusing) to the casual installer - --enable-dependency-tracking - do not reject slow dependency extractors - --disable-dependency-tracking - speeds up one-time build - --enable-shared[=PKGS] build shared libraries [default=yes] - --enable-static[=PKGS] build static libraries [default=yes] - --enable-fast-install[=PKGS] - optimize for fast installation [default=yes] - --disable-libtool-lock avoid locking (might break parallel builds) - --enable-werror[=OPT] Pass -Werror or the given argument to the compiler - if it is supported - --enable-unversioned-links - Installed libpng header files are placed in a - versioned subdirectory and installed libpng library - (including DLL) files are versioned. If this option - is enabled unversioned links will be created - pointing to the corresponding installed files. If - you use libpng.pc or libpng-config for all builds - you do not need these links, but if you compile - programs directly they will typically #include - and link with -lpng; in that case you need - the links. The links can be installed manually using - 'make install-header-links' and 'make - install-library-links' and can be removed using the - corresponding uninstall- targets. If you do enable - this option every libpng 'make install' will - recreate the links to point to the just installed - version of libpng. The default is to create the - links; use --disable-unversioned-links to change - this - --enable-unversioned-libpng-pc - Install the configuration file 'libpng.pc' as a link - to the versioned version. This is done by default - - use --disable-unversioned-libpng-pc to change this. - --enable-unversioned-libpng-config - Install the configuration file 'libpng-config' as a - link to the versioned version. This is done by - default - use --disable-unversioned-libpng-config to - change this. - --enable-hardware-optimizations - Enable hardware optimizations: =no/off, yes/on: - --enable-arm-neon Enable ARM NEON optimizations: =no/off, check, api, - yes/on: no/off: disable the optimizations; check: - use internal checking code (deprecated and poorly - supported); api: disable by default, enable by a - call to png_set_option; yes/on: turn on - unconditionally. If not specified: determined by the - compiler. - --enable-mips-msa Enable MIPS MSA optimizations: =no/off, check, api, - yes/on: no/off: disable the optimizations; check: - use internal checking code (deprecated and poorly - supported); api: disable by default, enable by a - call to png_set_option; yes/on: turn on - unconditionally. If not specified: determined by the - compiler. - --enable-intel-sse Enable Intel SSE optimizations: =no/off, yes/on: - no/off: disable the optimizations; yes/on: enable - the optimizations. If not specified: determined by - the compiler. - --enable-powerpc-vsx Enable POWERPC VSX optimizations: =no/off, check, - api, yes/on: no/off: disable the optimizations; - check: use internal checking code api: disable by - default, enable by a call to png_set_option yes/on: - turn on unconditionally. If not specified: - determined by the compiler. - -Optional Packages: - --with-PACKAGE[=ARG] use PACKAGE [ARG=yes] - --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no) - --with-gnu-ld assume the C compiler uses GNU ld [default=no] - --with-pic[=PKGS] try to use only PIC/non-PIC objects [default=use - both] - --with-aix-soname=aix|svr4|both - shared library versioning (aka "SONAME") variant to - provide on AIX, [default=aix]. - --with-sysroot[=DIR] Search for dependent libraries within DIR (or the - compiler's sysroot if not specified). - --with-zlib-prefix prefix that may have been used in installed zlib - --with-pkgconfigdir Use the specified pkgconfig dir (default is - libdir/pkgconfig) - --with-binconfigs Generate shell libpng-config scripts as well as - pkg-config data [default=yes] - --with-libpng-prefix prefix libpng exported function (API) names with the - given value - -Some influential environment variables: - CC C compiler command - CFLAGS C compiler flags - LDFLAGS linker flags, e.g. -L if you have libraries in a - nonstandard directory - LIBS libraries to pass to the linker, e.g. -l - CPPFLAGS (Objective) C/C++ preprocessor flags, e.g. -I if - you have headers in a nonstandard directory - CCAS assembler compiler command (defaults to CC) - CCASFLAGS assembler compiler flags (defaults to CFLAGS) - CPP C preprocessor - LT_SYS_LIBRARY_PATH - User-defined run-time library search path. - PNG_COPTS additional flags for the C compiler, use this for options that - would cause configure itself to fail - -Use these variables to override the choices made by `configure' or to help -it to find libraries and programs with nonstandard names/locations. - -Report bugs to . -_ACEOF -ac_status=$? -fi - -if test "$ac_init_help" = "recursive"; then - # If there are subdirs, report their specific --help. - for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue - test -d "$ac_dir" || - { cd "$srcdir" && ac_pwd=`pwd` && srcdir=. && test -d "$ac_dir"; } || - continue - ac_builddir=. - -case "$ac_dir" in -.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; -*) - ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'` - # A ".." for each directory in $ac_dir_suffix. - ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` - case $ac_top_builddir_sub in - "") ac_top_builddir_sub=. ac_top_build_prefix= ;; - *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; - esac ;; -esac -ac_abs_top_builddir=$ac_pwd -ac_abs_builddir=$ac_pwd$ac_dir_suffix -# for backward compatibility: -ac_top_builddir=$ac_top_build_prefix - -case $srcdir in - .) # We are building in place. - ac_srcdir=. - ac_top_srcdir=$ac_top_builddir_sub - ac_abs_top_srcdir=$ac_pwd ;; - [\\/]* | ?:[\\/]* ) # Absolute name. - ac_srcdir=$srcdir$ac_dir_suffix; - ac_top_srcdir=$srcdir - ac_abs_top_srcdir=$srcdir ;; - *) # Relative name. - ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix - ac_top_srcdir=$ac_top_build_prefix$srcdir - ac_abs_top_srcdir=$ac_pwd/$srcdir ;; -esac -ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix - - cd "$ac_dir" || { ac_status=$?; continue; } - # Check for guested configure. - if test -f "$ac_srcdir/configure.gnu"; then - echo && - $SHELL "$ac_srcdir/configure.gnu" --help=recursive - elif test -f "$ac_srcdir/configure"; then - echo && - $SHELL "$ac_srcdir/configure" --help=recursive - else - $as_echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2 - fi || ac_status=$? - cd "$ac_pwd" || { ac_status=$?; break; } - done -fi - -test -n "$ac_init_help" && exit $ac_status -if $ac_init_version; then - cat <<\_ACEOF -libpng configure 1.6.38.git -generated by GNU Autoconf 2.69 - -Copyright (C) 2012 Free Software Foundation, Inc. -This configure script is free software; the Free Software Foundation -gives unlimited permission to copy, distribute and modify it. -_ACEOF - exit -fi - -## ------------------------ ## -## Autoconf initialization. ## -## ------------------------ ## - -# ac_fn_c_try_compile LINENO -# -------------------------- -# Try to compile conftest.$ac_ext, and return whether this succeeded. -ac_fn_c_try_compile () -{ - as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - rm -f conftest.$ac_objext - if { { ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_compile") 2>conftest.err - ac_status=$? - if test -s conftest.err; then - grep -v '^ *+' conftest.err >conftest.er1 - cat conftest.er1 >&5 - mv -f conftest.er1 conftest.err - fi - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then : - ac_retval=0 -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_retval=1 -fi - eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno - as_fn_set_status $ac_retval - -} # ac_fn_c_try_compile - -# ac_fn_c_try_cpp LINENO -# ---------------------- -# Try to preprocess conftest.$ac_ext, and return whether this succeeded. -ac_fn_c_try_cpp () -{ - as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - if { { ac_try="$ac_cpp conftest.$ac_ext" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_cpp conftest.$ac_ext") 2>conftest.err - ac_status=$? - if test -s conftest.err; then - grep -v '^ *+' conftest.err >conftest.er1 - cat conftest.er1 >&5 - mv -f conftest.er1 conftest.err - fi - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } > conftest.i && { - test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || - test ! -s conftest.err - }; then : - ac_retval=0 -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_retval=1 -fi - eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno - as_fn_set_status $ac_retval - -} # ac_fn_c_try_cpp - -# ac_fn_c_try_link LINENO -# ----------------------- -# Try to link conftest.$ac_ext, and return whether this succeeded. -ac_fn_c_try_link () -{ - as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - rm -f conftest.$ac_objext conftest$ac_exeext - if { { ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_link") 2>conftest.err - ac_status=$? - if test -s conftest.err; then - grep -v '^ *+' conftest.err >conftest.er1 - cat conftest.er1 >&5 - mv -f conftest.er1 conftest.err - fi - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && { - test "$cross_compiling" = yes || - test -x conftest$ac_exeext - }; then : - ac_retval=0 -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_retval=1 -fi - # Delete the IPA/IPO (Inter Procedural Analysis/Optimization) information - # created by the PGI compiler (conftest_ipa8_conftest.oo), as it would - # interfere with the next link command; also delete a directory that is - # left behind by Apple's compiler. We do this before executing the actions. - rm -rf conftest.dSYM conftest_ipa8_conftest.oo - eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno - as_fn_set_status $ac_retval - -} # ac_fn_c_try_link - -# ac_fn_c_check_header_compile LINENO HEADER VAR INCLUDES -# ------------------------------------------------------- -# Tests whether HEADER exists and can be compiled using the include files in -# INCLUDES, setting the cache variable VAR accordingly. -ac_fn_c_check_header_compile () -{ - as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 -$as_echo_n "checking for $2... " >&6; } -if eval \${$3+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -$4 -#include <$2> -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - eval "$3=yes" -else - eval "$3=no" -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi -eval ac_res=\$$3 - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } - eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno - -} # ac_fn_c_check_header_compile - -# ac_fn_c_try_run LINENO -# ---------------------- -# Try to link conftest.$ac_ext, and return whether this succeeded. Assumes -# that executables *can* be run. -ac_fn_c_try_run () -{ - as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - if { { ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_link") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } && { ac_try='./conftest$ac_exeext' - { { case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_try") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; }; then : - ac_retval=0 -else - $as_echo "$as_me: program exited with status $ac_status" >&5 - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_retval=$ac_status -fi - rm -rf conftest.dSYM conftest_ipa8_conftest.oo - eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno - as_fn_set_status $ac_retval - -} # ac_fn_c_try_run - -# ac_fn_c_check_func LINENO FUNC VAR -# ---------------------------------- -# Tests whether FUNC exists, setting the cache variable VAR accordingly -ac_fn_c_check_func () -{ - as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 -$as_echo_n "checking for $2... " >&6; } -if eval \${$3+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -/* Define $2 to an innocuous variant, in case declares $2. - For example, HP-UX 11i declares gettimeofday. */ -#define $2 innocuous_$2 - -/* System header to define __stub macros and hopefully few prototypes, - which can conflict with char $2 (); below. - Prefer to if __STDC__ is defined, since - exists even on freestanding compilers. */ - -#ifdef __STDC__ -# include -#else -# include -#endif - -#undef $2 - -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char $2 (); -/* The GNU C library defines this for functions which it implements - to always fail with ENOSYS. Some functions are actually named - something starting with __ and the normal name is an alias. */ -#if defined __stub_$2 || defined __stub___$2 -choke me -#endif - -int -main () -{ -return $2 (); - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - eval "$3=yes" -else - eval "$3=no" -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -fi -eval ac_res=\$$3 - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } - eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno - -} # ac_fn_c_check_func - -# ac_fn_c_check_type LINENO TYPE VAR INCLUDES -# ------------------------------------------- -# Tests whether TYPE exists after having included INCLUDES, setting cache -# variable VAR accordingly. -ac_fn_c_check_type () -{ - as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 -$as_echo_n "checking for $2... " >&6; } -if eval \${$3+:} false; then : - $as_echo_n "(cached) " >&6 -else - eval "$3=no" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -$4 -int -main () -{ -if (sizeof ($2)) - return 0; - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -$4 -int -main () -{ -if (sizeof (($2))) - return 0; - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - -else - eval "$3=yes" -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi -eval ac_res=\$$3 - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } - eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno - -} # ac_fn_c_check_type -cat >config.log <<_ACEOF -This file contains any messages produced by compilers while -running configure, to aid debugging if configure makes a mistake. - -It was created by libpng $as_me 1.6.38.git, which was -generated by GNU Autoconf 2.69. Invocation command line was - - $ $0 $@ - -_ACEOF -exec 5>>config.log -{ -cat <<_ASUNAME -## --------- ## -## Platform. ## -## --------- ## - -hostname = `(hostname || uname -n) 2>/dev/null | sed 1q` -uname -m = `(uname -m) 2>/dev/null || echo unknown` -uname -r = `(uname -r) 2>/dev/null || echo unknown` -uname -s = `(uname -s) 2>/dev/null || echo unknown` -uname -v = `(uname -v) 2>/dev/null || echo unknown` - -/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown` -/bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown` - -/bin/arch = `(/bin/arch) 2>/dev/null || echo unknown` -/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown` -/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown` -/usr/bin/hostinfo = `(/usr/bin/hostinfo) 2>/dev/null || echo unknown` -/bin/machine = `(/bin/machine) 2>/dev/null || echo unknown` -/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown` -/bin/universe = `(/bin/universe) 2>/dev/null || echo unknown` - -_ASUNAME - -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - $as_echo "PATH: $as_dir" - done -IFS=$as_save_IFS - -} >&5 - -cat >&5 <<_ACEOF - - -## ----------- ## -## Core tests. ## -## ----------- ## - -_ACEOF - - -# Keep a trace of the command line. -# Strip out --no-create and --no-recursion so they do not pile up. -# Strip out --silent because we don't want to record it for future runs. -# Also quote any args containing shell meta-characters. -# Make two passes to allow for proper duplicate-argument suppression. -ac_configure_args= -ac_configure_args0= -ac_configure_args1= -ac_must_keep_next=false -for ac_pass in 1 2 -do - for ac_arg - do - case $ac_arg in - -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;; - -q | -quiet | --quiet | --quie | --qui | --qu | --q \ - | -silent | --silent | --silen | --sile | --sil) - continue ;; - *\'*) - ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; - esac - case $ac_pass in - 1) as_fn_append ac_configure_args0 " '$ac_arg'" ;; - 2) - as_fn_append ac_configure_args1 " '$ac_arg'" - if test $ac_must_keep_next = true; then - ac_must_keep_next=false # Got value, back to normal. - else - case $ac_arg in - *=* | --config-cache | -C | -disable-* | --disable-* \ - | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \ - | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \ - | -with-* | --with-* | -without-* | --without-* | --x) - case "$ac_configure_args0 " in - "$ac_configure_args1"*" '$ac_arg' "* ) continue ;; - esac - ;; - -* ) ac_must_keep_next=true ;; - esac - fi - as_fn_append ac_configure_args " '$ac_arg'" - ;; - esac - done -done -{ ac_configure_args0=; unset ac_configure_args0;} -{ ac_configure_args1=; unset ac_configure_args1;} - -# When interrupted or exit'd, cleanup temporary files, and complete -# config.log. We remove comments because anyway the quotes in there -# would cause problems or look ugly. -# WARNING: Use '\'' to represent an apostrophe within the trap. -# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug. -trap 'exit_status=$? - # Save into config.log some information that might help in debugging. - { - echo - - $as_echo "## ---------------- ## -## Cache variables. ## -## ---------------- ##" - echo - # The following way of writing the cache mishandles newlines in values, -( - for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do - eval ac_val=\$$ac_var - case $ac_val in #( - *${as_nl}*) - case $ac_var in #( - *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5 -$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;; - esac - case $ac_var in #( - _ | IFS | as_nl) ;; #( - BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #( - *) { eval $ac_var=; unset $ac_var;} ;; - esac ;; - esac - done - (set) 2>&1 | - case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #( - *${as_nl}ac_space=\ *) - sed -n \ - "s/'\''/'\''\\\\'\'''\''/g; - s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p" - ;; #( - *) - sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" - ;; - esac | - sort -) - echo - - $as_echo "## ----------------- ## -## Output variables. ## -## ----------------- ##" - echo - for ac_var in $ac_subst_vars - do - eval ac_val=\$$ac_var - case $ac_val in - *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; - esac - $as_echo "$ac_var='\''$ac_val'\''" - done | sort - echo - - if test -n "$ac_subst_files"; then - $as_echo "## ------------------- ## -## File substitutions. ## -## ------------------- ##" - echo - for ac_var in $ac_subst_files - do - eval ac_val=\$$ac_var - case $ac_val in - *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; - esac - $as_echo "$ac_var='\''$ac_val'\''" - done | sort - echo - fi - - if test -s confdefs.h; then - $as_echo "## ----------- ## -## confdefs.h. ## -## ----------- ##" - echo - cat confdefs.h - echo - fi - test "$ac_signal" != 0 && - $as_echo "$as_me: caught signal $ac_signal" - $as_echo "$as_me: exit $exit_status" - } >&5 - rm -f core *.core core.conftest.* && - rm -f -r conftest* confdefs* conf$$* $ac_clean_files && - exit $exit_status -' 0 -for ac_signal in 1 2 13 15; do - trap 'ac_signal='$ac_signal'; as_fn_exit 1' $ac_signal -done -ac_signal=0 - -# confdefs.h avoids OS command line length limits that DEFS can exceed. -rm -f -r conftest* confdefs.h - -$as_echo "/* confdefs.h */" > confdefs.h - -# Predefined preprocessor variables. - -cat >>confdefs.h <<_ACEOF -#define PACKAGE_NAME "$PACKAGE_NAME" -_ACEOF - -cat >>confdefs.h <<_ACEOF -#define PACKAGE_TARNAME "$PACKAGE_TARNAME" -_ACEOF - -cat >>confdefs.h <<_ACEOF -#define PACKAGE_VERSION "$PACKAGE_VERSION" -_ACEOF - -cat >>confdefs.h <<_ACEOF -#define PACKAGE_STRING "$PACKAGE_STRING" -_ACEOF - -cat >>confdefs.h <<_ACEOF -#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT" -_ACEOF - -cat >>confdefs.h <<_ACEOF -#define PACKAGE_URL "$PACKAGE_URL" -_ACEOF - - -# Let the site file select an alternate cache file if it wants to. -# Prefer an explicitly selected file to automatically selected ones. -ac_site_file1=NONE -ac_site_file2=NONE -if test -n "$CONFIG_SITE"; then - # We do not want a PATH search for config.site. - case $CONFIG_SITE in #(( - -*) ac_site_file1=./$CONFIG_SITE;; - */*) ac_site_file1=$CONFIG_SITE;; - *) ac_site_file1=./$CONFIG_SITE;; - esac -elif test "x$prefix" != xNONE; then - ac_site_file1=$prefix/share/config.site - ac_site_file2=$prefix/etc/config.site -else - ac_site_file1=$ac_default_prefix/share/config.site - ac_site_file2=$ac_default_prefix/etc/config.site -fi -for ac_site_file in "$ac_site_file1" "$ac_site_file2" -do - test "x$ac_site_file" = xNONE && continue - if test /dev/null != "$ac_site_file" && test -r "$ac_site_file"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: loading site script $ac_site_file" >&5 -$as_echo "$as_me: loading site script $ac_site_file" >&6;} - sed 's/^/| /' "$ac_site_file" >&5 - . "$ac_site_file" \ - || { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error $? "failed to load site script $ac_site_file -See \`config.log' for more details" "$LINENO" 5; } - fi -done - -if test -r "$cache_file"; then - # Some versions of bash will fail to source /dev/null (special files - # actually), so we avoid doing that. DJGPP emulates it as a regular file. - if test /dev/null != "$cache_file" && test -f "$cache_file"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: loading cache $cache_file" >&5 -$as_echo "$as_me: loading cache $cache_file" >&6;} - case $cache_file in - [\\/]* | ?:[\\/]* ) . "$cache_file";; - *) . "./$cache_file";; - esac - fi -else - { $as_echo "$as_me:${as_lineno-$LINENO}: creating cache $cache_file" >&5 -$as_echo "$as_me: creating cache $cache_file" >&6;} - >$cache_file -fi - -# Check that the precious variables saved in the cache have kept the same -# value. -ac_cache_corrupted=false -for ac_var in $ac_precious_vars; do - eval ac_old_set=\$ac_cv_env_${ac_var}_set - eval ac_new_set=\$ac_env_${ac_var}_set - eval ac_old_val=\$ac_cv_env_${ac_var}_value - eval ac_new_val=\$ac_env_${ac_var}_value - case $ac_old_set,$ac_new_set in - set,) - { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5 -$as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;} - ac_cache_corrupted=: ;; - ,set) - { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was not set in the previous run" >&5 -$as_echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;} - ac_cache_corrupted=: ;; - ,);; - *) - if test "x$ac_old_val" != "x$ac_new_val"; then - # differences in whitespace do not lead to failure. - ac_old_val_w=`echo x $ac_old_val` - ac_new_val_w=`echo x $ac_new_val` - if test "$ac_old_val_w" != "$ac_new_val_w"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' has changed since the previous run:" >&5 -$as_echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;} - ac_cache_corrupted=: - else - { $as_echo "$as_me:${as_lineno-$LINENO}: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5 -$as_echo "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&2;} - eval $ac_var=\$ac_old_val - fi - { $as_echo "$as_me:${as_lineno-$LINENO}: former value: \`$ac_old_val'" >&5 -$as_echo "$as_me: former value: \`$ac_old_val'" >&2;} - { $as_echo "$as_me:${as_lineno-$LINENO}: current value: \`$ac_new_val'" >&5 -$as_echo "$as_me: current value: \`$ac_new_val'" >&2;} - fi;; - esac - # Pass precious variables to config.status. - if test "$ac_new_set" = set; then - case $ac_new_val in - *\'*) ac_arg=$ac_var=`$as_echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;; - *) ac_arg=$ac_var=$ac_new_val ;; - esac - case " $ac_configure_args " in - *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy. - *) as_fn_append ac_configure_args " '$ac_arg'" ;; - esac - fi -done -if $ac_cache_corrupted; then - { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} - { $as_echo "$as_me:${as_lineno-$LINENO}: error: changes in the environment can compromise the build" >&5 -$as_echo "$as_me: error: changes in the environment can compromise the build" >&2;} - as_fn_error $? "run \`make distclean' and/or \`rm $cache_file' and start over" "$LINENO" 5 -fi -## -------------------- ## -## Main body of script. ## -## -------------------- ## - -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - - - - -# libpng does not follow GNU file name conventions (hence 'foreign') -# color-tests requires automake 1.11 or later -# silent-rules requires automake 1.11 or later -# dist-xz requires automake 1.11 or later -# 1.12.2 fixes a security issue in 1.11.2 and 1.12.1 -# 1.13 is required for parallel tests -am__api_version='1.16' - -ac_aux_dir= -for ac_dir in "$srcdir" "$srcdir/.." "$srcdir/../.."; do - if test -f "$ac_dir/install-sh"; then - ac_aux_dir=$ac_dir - ac_install_sh="$ac_aux_dir/install-sh -c" - break - elif test -f "$ac_dir/install.sh"; then - ac_aux_dir=$ac_dir - ac_install_sh="$ac_aux_dir/install.sh -c" - break - elif test -f "$ac_dir/shtool"; then - ac_aux_dir=$ac_dir - ac_install_sh="$ac_aux_dir/shtool install -c" - break - fi -done -if test -z "$ac_aux_dir"; then - as_fn_error $? "cannot find install-sh, install.sh, or shtool in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" "$LINENO" 5 -fi - -# These three variables are undocumented and unsupported, -# and are intended to be withdrawn in a future Autoconf release. -# They can cause serious problems if a builder's source tree is in a directory -# whose full name contains unusual characters. -ac_config_guess="$SHELL $ac_aux_dir/config.guess" # Please don't use this var. -ac_config_sub="$SHELL $ac_aux_dir/config.sub" # Please don't use this var. -ac_configure="$SHELL $ac_aux_dir/configure" # Please don't use this var. - - -# Find a good install program. We prefer a C program (faster), -# so one script is as good as another. But avoid the broken or -# incompatible versions: -# SysV /etc/install, /usr/sbin/install -# SunOS /usr/etc/install -# IRIX /sbin/install -# AIX /bin/install -# AmigaOS /C/install, which installs bootblocks on floppy discs -# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag -# AFS /usr/afsws/bin/install, which mishandles nonexistent args -# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" -# OS/2's system install, which has a completely different semantic -# ./install, which can be erroneously created by make from ./install.sh. -# Reject install programs that cannot install multiple files. -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a BSD-compatible install" >&5 -$as_echo_n "checking for a BSD-compatible install... " >&6; } -if test -z "$INSTALL"; then -if ${ac_cv_path_install+:} false; then : - $as_echo_n "(cached) " >&6 -else - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - # Account for people who put trailing slashes in PATH elements. -case $as_dir/ in #(( - ./ | .// | /[cC]/* | \ - /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \ - ?:[\\/]os2[\\/]install[\\/]* | ?:[\\/]OS2[\\/]INSTALL[\\/]* | \ - /usr/ucb/* ) ;; - *) - # OSF1 and SCO ODT 3.0 have their own names for install. - # Don't use installbsd from OSF since it installs stuff as root - # by default. - for ac_prog in ginstall scoinst install; do - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then - if test $ac_prog = install && - grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then - # AIX install. It has an incompatible calling convention. - : - elif test $ac_prog = install && - grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then - # program-specific install script used by HP pwplus--don't use. - : - else - rm -rf conftest.one conftest.two conftest.dir - echo one > conftest.one - echo two > conftest.two - mkdir conftest.dir - if "$as_dir/$ac_prog$ac_exec_ext" -c conftest.one conftest.two "`pwd`/conftest.dir" && - test -s conftest.one && test -s conftest.two && - test -s conftest.dir/conftest.one && - test -s conftest.dir/conftest.two - then - ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c" - break 3 - fi - fi - fi - done - done - ;; -esac - - done -IFS=$as_save_IFS - -rm -rf conftest.one conftest.two conftest.dir - -fi - if test "${ac_cv_path_install+set}" = set; then - INSTALL=$ac_cv_path_install - else - # As a last resort, use the slow shell script. Don't cache a - # value for INSTALL within a source directory, because that will - # break other packages using the cache if that directory is - # removed, or if the value is a relative name. - INSTALL=$ac_install_sh - fi -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $INSTALL" >&5 -$as_echo "$INSTALL" >&6; } - -# Use test -z because SunOS4 sh mishandles braces in ${var-val}. -# It thinks the first close brace ends the variable substitution. -test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' - -test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}' - -test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether build environment is sane" >&5 -$as_echo_n "checking whether build environment is sane... " >&6; } -# Reject unsafe characters in $srcdir or the absolute working directory -# name. Accept space and tab only in the latter. -am_lf=' -' -case `pwd` in - *[\\\"\#\$\&\'\`$am_lf]*) - as_fn_error $? "unsafe absolute working directory name" "$LINENO" 5;; -esac -case $srcdir in - *[\\\"\#\$\&\'\`$am_lf\ \ ]*) - as_fn_error $? "unsafe srcdir value: '$srcdir'" "$LINENO" 5;; -esac - -# Do 'set' in a subshell so we don't clobber the current shell's -# arguments. Must try -L first in case configure is actually a -# symlink; some systems play weird games with the mod time of symlinks -# (eg FreeBSD returns the mod time of the symlink's containing -# directory). -if ( - am_has_slept=no - for am_try in 1 2; do - echo "timestamp, slept: $am_has_slept" > conftest.file - set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null` - if test "$*" = "X"; then - # -L didn't work. - set X `ls -t "$srcdir/configure" conftest.file` - fi - if test "$*" != "X $srcdir/configure conftest.file" \ - && test "$*" != "X conftest.file $srcdir/configure"; then - - # If neither matched, then we have a broken ls. This can happen - # if, for instance, CONFIG_SHELL is bash and it inherits a - # broken ls alias from the environment. This has actually - # happened. Such a system could not be considered "sane". - as_fn_error $? "ls -t appears to fail. Make sure there is not a broken - alias in your environment" "$LINENO" 5 - fi - if test "$2" = conftest.file || test $am_try -eq 2; then - break - fi - # Just in case. - sleep 1 - am_has_slept=yes - done - test "$2" = conftest.file - ) -then - # Ok. - : -else - as_fn_error $? "newly created file is older than distributed files! -Check your system clock" "$LINENO" 5 -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -$as_echo "yes" >&6; } -# If we didn't sleep, we still need to ensure time stamps of config.status and -# generated files are strictly newer. -am_sleep_pid= -if grep 'slept: no' conftest.file >/dev/null 2>&1; then - ( sleep 1 ) & - am_sleep_pid=$! -fi - -rm -f conftest.file - -test "$program_prefix" != NONE && - program_transform_name="s&^&$program_prefix&;$program_transform_name" -# Use a double $ so make ignores it. -test "$program_suffix" != NONE && - program_transform_name="s&\$&$program_suffix&;$program_transform_name" -# Double any \ or $. -# By default was `s,x,x', remove it if useless. -ac_script='s/[\\$]/&&/g;s/;s,x,x,$//' -program_transform_name=`$as_echo "$program_transform_name" | sed "$ac_script"` - -# Expand $ac_aux_dir to an absolute path. -am_aux_dir=`cd "$ac_aux_dir" && pwd` - -if test x"${MISSING+set}" != xset; then - case $am_aux_dir in - *\ * | *\ *) - MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;; - *) - MISSING="\${SHELL} $am_aux_dir/missing" ;; - esac -fi -# Use eval to expand $SHELL -if eval "$MISSING --is-lightweight"; then - am_missing_run="$MISSING " -else - am_missing_run= - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: 'missing' script is too old or missing" >&5 -$as_echo "$as_me: WARNING: 'missing' script is too old or missing" >&2;} -fi - -if test x"${install_sh+set}" != xset; then - case $am_aux_dir in - *\ * | *\ *) - install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;; - *) - install_sh="\${SHELL} $am_aux_dir/install-sh" - esac -fi - -# Installed binaries are usually stripped using 'strip' when the user -# run "make install-strip". However 'strip' might not be the right -# tool to use in cross-compilation environments, therefore Automake -# will honor the 'STRIP' environment variable to overrule this program. -if test "$cross_compiling" != no; then - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. -set dummy ${ac_tool_prefix}strip; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_STRIP+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$STRIP"; then - ac_cv_prog_STRIP="$STRIP" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_STRIP="${ac_tool_prefix}strip" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -STRIP=$ac_cv_prog_STRIP -if test -n "$STRIP"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5 -$as_echo "$STRIP" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -fi -if test -z "$ac_cv_prog_STRIP"; then - ac_ct_STRIP=$STRIP - # Extract the first word of "strip", so it can be a program name with args. -set dummy strip; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_STRIP+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_STRIP"; then - ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_STRIP="strip" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP -if test -n "$ac_ct_STRIP"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5 -$as_echo "$ac_ct_STRIP" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - if test "x$ac_ct_STRIP" = x; then - STRIP=":" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - STRIP=$ac_ct_STRIP - fi -else - STRIP="$ac_cv_prog_STRIP" -fi - -fi -INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s" - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a thread-safe mkdir -p" >&5 -$as_echo_n "checking for a thread-safe mkdir -p... " >&6; } -if test -z "$MKDIR_P"; then - if ${ac_cv_path_mkdir+:} false; then : - $as_echo_n "(cached) " >&6 -else - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH$PATH_SEPARATOR/opt/sfw/bin -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_prog in mkdir gmkdir; do - for ac_exec_ext in '' $ac_executable_extensions; do - as_fn_executable_p "$as_dir/$ac_prog$ac_exec_ext" || continue - case `"$as_dir/$ac_prog$ac_exec_ext" --version 2>&1` in #( - 'mkdir (GNU coreutils) '* | \ - 'mkdir (coreutils) '* | \ - 'mkdir (fileutils) '4.1*) - ac_cv_path_mkdir=$as_dir/$ac_prog$ac_exec_ext - break 3;; - esac - done - done - done -IFS=$as_save_IFS - -fi - - test -d ./--version && rmdir ./--version - if test "${ac_cv_path_mkdir+set}" = set; then - MKDIR_P="$ac_cv_path_mkdir -p" - else - # As a last resort, use the slow shell script. Don't cache a - # value for MKDIR_P within a source directory, because that will - # break other packages using the cache if that directory is - # removed, or if the value is a relative name. - MKDIR_P="$ac_install_sh -d" - fi -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $MKDIR_P" >&5 -$as_echo "$MKDIR_P" >&6; } - -for ac_prog in gawk mawk nawk awk -do - # Extract the first word of "$ac_prog", so it can be a program name with args. -set dummy $ac_prog; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_AWK+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$AWK"; then - ac_cv_prog_AWK="$AWK" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_AWK="$ac_prog" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -AWK=$ac_cv_prog_AWK -if test -n "$AWK"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AWK" >&5 -$as_echo "$AWK" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - test -n "$AWK" && break -done - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ${MAKE-make} sets \$(MAKE)" >&5 -$as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; } -set x ${MAKE-make} -ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'` -if eval \${ac_cv_prog_make_${ac_make}_set+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat >conftest.make <<\_ACEOF -SHELL = /bin/sh -all: - @echo '@@@%%%=$(MAKE)=@@@%%%' -_ACEOF -# GNU make sometimes prints "make[1]: Entering ...", which would confuse us. -case `${MAKE-make} -f conftest.make 2>/dev/null` in - *@@@%%%=?*=@@@%%%*) - eval ac_cv_prog_make_${ac_make}_set=yes;; - *) - eval ac_cv_prog_make_${ac_make}_set=no;; -esac -rm -f conftest.make -fi -if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -$as_echo "yes" >&6; } - SET_MAKE= -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } - SET_MAKE="MAKE=${MAKE-make}" -fi - -rm -rf .tst 2>/dev/null -mkdir .tst 2>/dev/null -if test -d .tst; then - am__leading_dot=. -else - am__leading_dot=_ -fi -rmdir .tst 2>/dev/null - -# Check whether --enable-silent-rules was given. -if test "${enable_silent_rules+set}" = set; then : - enableval=$enable_silent_rules; -fi - -case $enable_silent_rules in # ((( - yes) AM_DEFAULT_VERBOSITY=0;; - no) AM_DEFAULT_VERBOSITY=1;; - *) AM_DEFAULT_VERBOSITY=1;; -esac -am_make=${MAKE-make} -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $am_make supports nested variables" >&5 -$as_echo_n "checking whether $am_make supports nested variables... " >&6; } -if ${am_cv_make_support_nested_variables+:} false; then : - $as_echo_n "(cached) " >&6 -else - if $as_echo 'TRUE=$(BAR$(V)) -BAR0=false -BAR1=true -V=1 -am__doit: - @$(TRUE) -.PHONY: am__doit' | $am_make -f - >/dev/null 2>&1; then - am_cv_make_support_nested_variables=yes -else - am_cv_make_support_nested_variables=no -fi -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_make_support_nested_variables" >&5 -$as_echo "$am_cv_make_support_nested_variables" >&6; } -if test $am_cv_make_support_nested_variables = yes; then - AM_V='$(V)' - AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)' -else - AM_V=$AM_DEFAULT_VERBOSITY - AM_DEFAULT_V=$AM_DEFAULT_VERBOSITY -fi -AM_BACKSLASH='\' - -if test "`cd $srcdir && pwd`" != "`pwd`"; then - # Use -I$(srcdir) only when $(srcdir) != ., so that make's output - # is not polluted with repeated "-I." - am__isrc=' -I$(srcdir)' - # test to see if srcdir already configured - if test -f $srcdir/config.status; then - as_fn_error $? "source directory already configured; run \"make distclean\" there first" "$LINENO" 5 - fi -fi - -# test whether we have cygpath -if test -z "$CYGPATH_W"; then - if (cygpath --version) >/dev/null 2>/dev/null; then - CYGPATH_W='cygpath -w' - else - CYGPATH_W=echo - fi -fi - - -# Define the identity of the package. - PACKAGE='libpng' - VERSION='1.6.38.git' - - -cat >>confdefs.h <<_ACEOF -#define PACKAGE "$PACKAGE" -_ACEOF - - -cat >>confdefs.h <<_ACEOF -#define VERSION "$VERSION" -_ACEOF - -# Some tools Automake needs. - -ACLOCAL=${ACLOCAL-"${am_missing_run}aclocal-${am__api_version}"} - - -AUTOCONF=${AUTOCONF-"${am_missing_run}autoconf"} - - -AUTOMAKE=${AUTOMAKE-"${am_missing_run}automake-${am__api_version}"} - - -AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"} - - -MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"} - -# For better backward compatibility. To be removed once Automake 1.9.x -# dies out for good. For more background, see: -# -# -mkdir_p='$(MKDIR_P)' - -# We need awk for the "check" target (and possibly the TAP driver). The -# system "awk" is bad on some platforms. -# Always define AMTAR for backward compatibility. Yes, it's still used -# in the wild :-( We should find a proper way to deprecate it ... -AMTAR='$${TAR-tar}' - - -# We'll loop over all known methods to create a tar archive until one works. -_am_tools='gnutar pax cpio none' - -am__tar='$${TAR-tar} chof - "$$tardir"' am__untar='$${TAR-tar} xf -' - - - - - - -# POSIX will say in a future version that running "rm -f" with no argument -# is OK; and we want to be able to make that assumption in our Makefile -# recipes. So use an aggressive probe to check that the usage we want is -# actually supported "in the wild" to an acceptable degree. -# See automake bug#10828. -# To make any issue more visible, cause the running configure to be aborted -# by default if the 'rm' program in use doesn't match our expectations; the -# user can still override this though. -if rm -f && rm -fr && rm -rf; then : OK; else - cat >&2 <<'END' -Oops! - -Your 'rm' program seems unable to run without file operands specified -on the command line, even when the '-f' option is present. This is contrary -to the behaviour of most rm programs out there, and not conforming with -the upcoming POSIX standard: - -Please tell bug-automake@gnu.org about your system, including the value -of your $PATH and any error possibly output before this message. This -can help us improve future automake versions. - -END - if test x"$ACCEPT_INFERIOR_RM_PROGRAM" = x"yes"; then - echo 'Configuration will proceed anyway, since you have set the' >&2 - echo 'ACCEPT_INFERIOR_RM_PROGRAM variable to "yes"' >&2 - echo >&2 - else - cat >&2 <<'END' -Aborting the configuration process, to ensure you take notice of the issue. - -You can download and install GNU coreutils to get an 'rm' implementation -that behaves properly: . - -If you want to complete the configuration process using your problematic -'rm' anyway, export the environment variable ACCEPT_INFERIOR_RM_PROGRAM -to "yes", and re-run configure. - -END - as_fn_error $? "Your 'rm' program is bad, sorry." "$LINENO" 5 - fi -fi - -# The following line causes --disable-maintainer-mode to be the default to -# configure. This is necessary because libpng distributions cannot rely on the -# time stamps of the autotools generated files being correct - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to enable maintainer-specific portions of Makefiles" >&5 -$as_echo_n "checking whether to enable maintainer-specific portions of Makefiles... " >&6; } - # Check whether --enable-maintainer-mode was given. -if test "${enable_maintainer_mode+set}" = set; then : - enableval=$enable_maintainer_mode; USE_MAINTAINER_MODE=$enableval -else - USE_MAINTAINER_MODE=no -fi - - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $USE_MAINTAINER_MODE" >&5 -$as_echo "$USE_MAINTAINER_MODE" >&6; } - if test $USE_MAINTAINER_MODE = yes; then - MAINTAINER_MODE_TRUE= - MAINTAINER_MODE_FALSE='#' -else - MAINTAINER_MODE_TRUE='#' - MAINTAINER_MODE_FALSE= -fi - - MAINT=$MAINTAINER_MODE_TRUE - - - - -PNGLIB_VERSION=1.6.38.git -PNGLIB_MAJOR=1 -PNGLIB_MINOR=6 -PNGLIB_RELEASE=38 - - - -ac_config_headers="$ac_config_headers config.h" - - -# Checks for programs. -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu -if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args. -set dummy ${ac_tool_prefix}gcc; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_CC+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_CC="${ac_tool_prefix}gcc" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -CC=$ac_cv_prog_CC -if test -n "$CC"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 -$as_echo "$CC" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -fi -if test -z "$ac_cv_prog_CC"; then - ac_ct_CC=$CC - # Extract the first word of "gcc", so it can be a program name with args. -set dummy gcc; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_CC+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_CC"; then - ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_CC="gcc" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -ac_ct_CC=$ac_cv_prog_ac_ct_CC -if test -n "$ac_ct_CC"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5 -$as_echo "$ac_ct_CC" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - if test "x$ac_ct_CC" = x; then - CC="" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - CC=$ac_ct_CC - fi -else - CC="$ac_cv_prog_CC" -fi - -if test -z "$CC"; then - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args. -set dummy ${ac_tool_prefix}cc; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_CC+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_CC="${ac_tool_prefix}cc" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -CC=$ac_cv_prog_CC -if test -n "$CC"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 -$as_echo "$CC" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - fi -fi -if test -z "$CC"; then - # Extract the first word of "cc", so it can be a program name with args. -set dummy cc; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_CC+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -else - ac_prog_rejected=no -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then - ac_prog_rejected=yes - continue - fi - ac_cv_prog_CC="cc" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -if test $ac_prog_rejected = yes; then - # We found a bogon in the path, so make sure we never use it. - set dummy $ac_cv_prog_CC - shift - if test $# != 0; then - # We chose a different compiler from the bogus one. - # However, it has the same basename, so the bogon will be chosen - # first if we set CC to just the basename; use the full file name. - shift - ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@" - fi -fi -fi -fi -CC=$ac_cv_prog_CC -if test -n "$CC"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 -$as_echo "$CC" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -fi -if test -z "$CC"; then - if test -n "$ac_tool_prefix"; then - for ac_prog in cl.exe - do - # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. -set dummy $ac_tool_prefix$ac_prog; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_CC+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_CC="$ac_tool_prefix$ac_prog" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -CC=$ac_cv_prog_CC -if test -n "$CC"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 -$as_echo "$CC" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - test -n "$CC" && break - done -fi -if test -z "$CC"; then - ac_ct_CC=$CC - for ac_prog in cl.exe -do - # Extract the first word of "$ac_prog", so it can be a program name with args. -set dummy $ac_prog; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_CC+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_CC"; then - ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_CC="$ac_prog" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -ac_ct_CC=$ac_cv_prog_ac_ct_CC -if test -n "$ac_ct_CC"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5 -$as_echo "$ac_ct_CC" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - test -n "$ac_ct_CC" && break -done - - if test "x$ac_ct_CC" = x; then - CC="" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - CC=$ac_ct_CC - fi -fi - -fi - - -test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error $? "no acceptable C compiler found in \$PATH -See \`config.log' for more details" "$LINENO" 5; } - -# Provide some information about the compiler. -$as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5 -set X $ac_compile -ac_compiler=$2 -for ac_option in --version -v -V -qversion; do - { { ac_try="$ac_compiler $ac_option >&5" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_compiler $ac_option >&5") 2>conftest.err - ac_status=$? - if test -s conftest.err; then - sed '10a\ -... rest of stderr output deleted ... - 10q' conftest.err >conftest.er1 - cat conftest.er1 >&5 - fi - rm -f conftest.er1 conftest.err - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } -done - -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -ac_clean_files_save=$ac_clean_files -ac_clean_files="$ac_clean_files a.out a.out.dSYM a.exe b.out" -# Try to create an executable without -o first, disregard a.out. -# It will help us diagnose broken compilers, and finding out an intuition -# of exeext. -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler works" >&5 -$as_echo_n "checking whether the C compiler works... " >&6; } -ac_link_default=`$as_echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'` - -# The possible output files: -ac_files="a.out conftest.exe conftest a.exe a_out.exe b.out conftest.*" - -ac_rmfiles= -for ac_file in $ac_files -do - case $ac_file in - *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; - * ) ac_rmfiles="$ac_rmfiles $ac_file";; - esac -done -rm -f $ac_rmfiles - -if { { ac_try="$ac_link_default" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_link_default") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then : - # Autoconf-2.13 could set the ac_cv_exeext variable to `no'. -# So ignore a value of `no', otherwise this would lead to `EXEEXT = no' -# in a Makefile. We should not override ac_cv_exeext if it was cached, -# so that the user can short-circuit this test for compilers unknown to -# Autoconf. -for ac_file in $ac_files '' -do - test -f "$ac_file" || continue - case $ac_file in - *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) - ;; - [ab].out ) - # We found the default executable, but exeext='' is most - # certainly right. - break;; - *.* ) - if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no; - then :; else - ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` - fi - # We set ac_cv_exeext here because the later test for it is not - # safe: cross compilers may not add the suffix if given an `-o' - # argument, so we may need to know it at that point already. - # Even if this section looks crufty: it has the advantage of - # actually working. - break;; - * ) - break;; - esac -done -test "$ac_cv_exeext" = no && ac_cv_exeext= - -else - ac_file='' -fi -if test -z "$ac_file"; then : - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -$as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error 77 "C compiler cannot create executables -See \`config.log' for more details" "$LINENO" 5; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -$as_echo "yes" >&6; } -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler default output file name" >&5 -$as_echo_n "checking for C compiler default output file name... " >&6; } -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_file" >&5 -$as_echo "$ac_file" >&6; } -ac_exeext=$ac_cv_exeext - -rm -f -r a.out a.out.dSYM a.exe conftest$ac_cv_exeext b.out -ac_clean_files=$ac_clean_files_save -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of executables" >&5 -$as_echo_n "checking for suffix of executables... " >&6; } -if { { ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_link") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then : - # If both `conftest.exe' and `conftest' are `present' (well, observable) -# catch `conftest.exe'. For instance with Cygwin, `ls conftest' will -# work properly (i.e., refer to `conftest.exe'), while it won't with -# `rm'. -for ac_file in conftest.exe conftest conftest.*; do - test -f "$ac_file" || continue - case $ac_file in - *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; - *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` - break;; - * ) break;; - esac -done -else - { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error $? "cannot compute suffix of executables: cannot compile and link -See \`config.log' for more details" "$LINENO" 5; } -fi -rm -f conftest conftest$ac_cv_exeext -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_exeext" >&5 -$as_echo "$ac_cv_exeext" >&6; } - -rm -f conftest.$ac_ext -EXEEXT=$ac_cv_exeext -ac_exeext=$EXEEXT -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include -int -main () -{ -FILE *f = fopen ("conftest.out", "w"); - return ferror (f) || fclose (f) != 0; - - ; - return 0; -} -_ACEOF -ac_clean_files="$ac_clean_files conftest.out" -# Check that the compiler produces executables we can run. If not, either -# the compiler is broken, or we cross compile. -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are cross compiling" >&5 -$as_echo_n "checking whether we are cross compiling... " >&6; } -if test "$cross_compiling" != yes; then - { { ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_link") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } - if { ac_try='./conftest$ac_cv_exeext' - { { case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_try") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; }; then - cross_compiling=no - else - if test "$cross_compiling" = maybe; then - cross_compiling=yes - else - { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error $? "cannot run C compiled programs. -If you meant to cross compile, use \`--host'. -See \`config.log' for more details" "$LINENO" 5; } - fi - fi -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $cross_compiling" >&5 -$as_echo "$cross_compiling" >&6; } - -rm -f conftest.$ac_ext conftest$ac_cv_exeext conftest.out -ac_clean_files=$ac_clean_files_save -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of object files" >&5 -$as_echo_n "checking for suffix of object files... " >&6; } -if ${ac_cv_objext+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -rm -f conftest.o conftest.obj -if { { ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_compile") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then : - for ac_file in conftest.o conftest.obj conftest.*; do - test -f "$ac_file" || continue; - case $ac_file in - *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM ) ;; - *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'` - break;; - esac -done -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error $? "cannot compute suffix of object files: cannot compile -See \`config.log' for more details" "$LINENO" 5; } -fi -rm -f conftest.$ac_cv_objext conftest.$ac_ext -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_objext" >&5 -$as_echo "$ac_cv_objext" >&6; } -OBJEXT=$ac_cv_objext -ac_objext=$OBJEXT -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C compiler" >&5 -$as_echo_n "checking whether we are using the GNU C compiler... " >&6; } -if ${ac_cv_c_compiler_gnu+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ -#ifndef __GNUC__ - choke me -#endif - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - ac_compiler_gnu=yes -else - ac_compiler_gnu=no -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -ac_cv_c_compiler_gnu=$ac_compiler_gnu - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_compiler_gnu" >&5 -$as_echo "$ac_cv_c_compiler_gnu" >&6; } -if test $ac_compiler_gnu = yes; then - GCC=yes -else - GCC= -fi -ac_test_CFLAGS=${CFLAGS+set} -ac_save_CFLAGS=$CFLAGS -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -g" >&5 -$as_echo_n "checking whether $CC accepts -g... " >&6; } -if ${ac_cv_prog_cc_g+:} false; then : - $as_echo_n "(cached) " >&6 -else - ac_save_c_werror_flag=$ac_c_werror_flag - ac_c_werror_flag=yes - ac_cv_prog_cc_g=no - CFLAGS="-g" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - ac_cv_prog_cc_g=yes -else - CFLAGS="" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - -else - ac_c_werror_flag=$ac_save_c_werror_flag - CFLAGS="-g" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - ac_cv_prog_cc_g=yes -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - ac_c_werror_flag=$ac_save_c_werror_flag -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_g" >&5 -$as_echo "$ac_cv_prog_cc_g" >&6; } -if test "$ac_test_CFLAGS" = set; then - CFLAGS=$ac_save_CFLAGS -elif test $ac_cv_prog_cc_g = yes; then - if test "$GCC" = yes; then - CFLAGS="-g -O2" - else - CFLAGS="-g" - fi -else - if test "$GCC" = yes; then - CFLAGS="-O2" - else - CFLAGS= - fi -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C89" >&5 -$as_echo_n "checking for $CC option to accept ISO C89... " >&6; } -if ${ac_cv_prog_cc_c89+:} false; then : - $as_echo_n "(cached) " >&6 -else - ac_cv_prog_cc_c89=no -ac_save_CC=$CC -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include -#include -struct stat; -/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */ -struct buf { int x; }; -FILE * (*rcsopen) (struct buf *, struct stat *, int); -static char *e (p, i) - char **p; - int i; -{ - return p[i]; -} -static char *f (char * (*g) (char **, int), char **p, ...) -{ - char *s; - va_list v; - va_start (v,p); - s = g (p, va_arg (v,int)); - va_end (v); - return s; -} - -/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has - function prototypes and stuff, but not '\xHH' hex character constants. - These don't provoke an error unfortunately, instead are silently treated - as 'x'. The following induces an error, until -std is added to get - proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an - array size at least. It's necessary to write '\x00'==0 to get something - that's true only with -std. */ -int osf4_cc_array ['\x00' == 0 ? 1 : -1]; - -/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters - inside strings and character constants. */ -#define FOO(x) 'x' -int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1]; - -int test (int i, double x); -struct s1 {int (*f) (int a);}; -struct s2 {int (*f) (double a);}; -int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int); -int argc; -char **argv; -int -main () -{ -return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1]; - ; - return 0; -} -_ACEOF -for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \ - -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" -do - CC="$ac_save_CC $ac_arg" - if ac_fn_c_try_compile "$LINENO"; then : - ac_cv_prog_cc_c89=$ac_arg -fi -rm -f core conftest.err conftest.$ac_objext - test "x$ac_cv_prog_cc_c89" != "xno" && break -done -rm -f conftest.$ac_ext -CC=$ac_save_CC - -fi -# AC_CACHE_VAL -case "x$ac_cv_prog_cc_c89" in - x) - { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5 -$as_echo "none needed" >&6; } ;; - xno) - { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5 -$as_echo "unsupported" >&6; } ;; - *) - CC="$CC $ac_cv_prog_cc_c89" - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5 -$as_echo "$ac_cv_prog_cc_c89" >&6; } ;; -esac -if test "x$ac_cv_prog_cc_c89" != xno; then : - -fi - -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC understands -c and -o together" >&5 -$as_echo_n "checking whether $CC understands -c and -o together... " >&6; } -if ${am_cv_prog_cc_c_o+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF - # Make sure it works both with $CC and with simple cc. - # Following AC_PROG_CC_C_O, we do the test twice because some - # compilers refuse to overwrite an existing .o file with -o, - # though they will create one. - am_cv_prog_cc_c_o=yes - for am_i in 1 2; do - if { echo "$as_me:$LINENO: $CC -c conftest.$ac_ext -o conftest2.$ac_objext" >&5 - ($CC -c conftest.$ac_ext -o conftest2.$ac_objext) >&5 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } \ - && test -f conftest2.$ac_objext; then - : OK - else - am_cv_prog_cc_c_o=no - break - fi - done - rm -f core conftest* - unset am_i -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_prog_cc_c_o" >&5 -$as_echo "$am_cv_prog_cc_c_o" >&6; } -if test "$am_cv_prog_cc_c_o" != yes; then - # Losing compiler, so override with the script. - # FIXME: It is wrong to rewrite CC. - # But if we don't then we get into trouble of one sort or another. - # A longer-term fix would be to have automake use am__CC in this case, - # and then we could set am__CC="\$(top_srcdir)/compile \$(CC)" - CC="$am_aux_dir/compile $CC" -fi -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - -DEPDIR="${am__leading_dot}deps" - -ac_config_commands="$ac_config_commands depfiles" - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ${MAKE-make} supports the include directive" >&5 -$as_echo_n "checking whether ${MAKE-make} supports the include directive... " >&6; } -cat > confinc.mk << 'END' -am__doit: - @echo this is the am__doit target >confinc.out -.PHONY: am__doit -END -am__include="#" -am__quote= -# BSD make does it like this. -echo '.include "confinc.mk" # ignored' > confmf.BSD -# Other make implementations (GNU, Solaris 10, AIX) do it like this. -echo 'include confinc.mk # ignored' > confmf.GNU -_am_result=no -for s in GNU BSD; do - { echo "$as_me:$LINENO: ${MAKE-make} -f confmf.$s && cat confinc.out" >&5 - (${MAKE-make} -f confmf.$s && cat confinc.out) >&5 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } - case $?:`cat confinc.out 2>/dev/null` in #( - '0:this is the am__doit target') : - case $s in #( - BSD) : - am__include='.include' am__quote='"' ;; #( - *) : - am__include='include' am__quote='' ;; -esac ;; #( - *) : - ;; -esac - if test "$am__include" != "#"; then - _am_result="yes ($s style)" - break - fi -done -rm -f confinc.* confmf.* -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: ${_am_result}" >&5 -$as_echo "${_am_result}" >&6; } - -# Check whether --enable-dependency-tracking was given. -if test "${enable_dependency_tracking+set}" = set; then : - enableval=$enable_dependency_tracking; -fi - -if test "x$enable_dependency_tracking" != xno; then - am_depcomp="$ac_aux_dir/depcomp" - AMDEPBACKSLASH='\' - am__nodep='_no' -fi - if test "x$enable_dependency_tracking" != xno; then - AMDEP_TRUE= - AMDEP_FALSE='#' -else - AMDEP_TRUE='#' - AMDEP_FALSE= -fi - - - -depcc="$CC" am_compiler_list= - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5 -$as_echo_n "checking dependency style of $depcc... " >&6; } -if ${am_cv_CC_dependencies_compiler_type+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then - # We make a subdir and do the tests there. Otherwise we can end up - # making bogus files that we don't know about and never remove. For - # instance it was reported that on HP-UX the gcc test will end up - # making a dummy file named 'D' -- because '-MD' means "put the output - # in D". - rm -rf conftest.dir - mkdir conftest.dir - # Copy depcomp to subdir because otherwise we won't find it if we're - # using a relative directory. - cp "$am_depcomp" conftest.dir - cd conftest.dir - # We will build objects and dependencies in a subdirectory because - # it helps to detect inapplicable dependency modes. For instance - # both Tru64's cc and ICC support -MD to output dependencies as a - # side effect of compilation, but ICC will put the dependencies in - # the current directory while Tru64 will put them in the object - # directory. - mkdir sub - - am_cv_CC_dependencies_compiler_type=none - if test "$am_compiler_list" = ""; then - am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp` - fi - am__universal=false - case " $depcc " in #( - *\ -arch\ *\ -arch\ *) am__universal=true ;; - esac - - for depmode in $am_compiler_list; do - # Setup a source with many dependencies, because some compilers - # like to wrap large dependency lists on column 80 (with \), and - # we should not choose a depcomp mode which is confused by this. - # - # We need to recreate these files for each test, as the compiler may - # overwrite some of them when testing with obscure command lines. - # This happens at least with the AIX C compiler. - : > sub/conftest.c - for i in 1 2 3 4 5 6; do - echo '#include "conftst'$i'.h"' >> sub/conftest.c - # Using ": > sub/conftst$i.h" creates only sub/conftst1.h with - # Solaris 10 /bin/sh. - echo '/* dummy */' > sub/conftst$i.h - done - echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf - - # We check with '-c' and '-o' for the sake of the "dashmstdout" - # mode. It turns out that the SunPro C++ compiler does not properly - # handle '-M -o', and we need to detect this. Also, some Intel - # versions had trouble with output in subdirs. - am__obj=sub/conftest.${OBJEXT-o} - am__minus_obj="-o $am__obj" - case $depmode in - gcc) - # This depmode causes a compiler race in universal mode. - test "$am__universal" = false || continue - ;; - nosideeffect) - # After this tag, mechanisms are not by side-effect, so they'll - # only be used when explicitly requested. - if test "x$enable_dependency_tracking" = xyes; then - continue - else - break - fi - ;; - msvc7 | msvc7msys | msvisualcpp | msvcmsys) - # This compiler won't grok '-c -o', but also, the minuso test has - # not run yet. These depmodes are late enough in the game, and - # so weak that their functioning should not be impacted. - am__obj=conftest.${OBJEXT-o} - am__minus_obj= - ;; - none) break ;; - esac - if depmode=$depmode \ - source=sub/conftest.c object=$am__obj \ - depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ - $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \ - >/dev/null 2>conftest.err && - grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && - grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && - grep $am__obj sub/conftest.Po > /dev/null 2>&1 && - ${MAKE-make} -s -f confmf > /dev/null 2>&1; then - # icc doesn't choke on unknown options, it will just issue warnings - # or remarks (even with -Werror). So we grep stderr for any message - # that says an option was ignored or not supported. - # When given -MP, icc 7.0 and 7.1 complain thusly: - # icc: Command line warning: ignoring option '-M'; no argument required - # The diagnosis changed in icc 8.0: - # icc: Command line remark: option '-MP' not supported - if (grep 'ignoring option' conftest.err || - grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else - am_cv_CC_dependencies_compiler_type=$depmode - break - fi - fi - done - - cd .. - rm -rf conftest.dir -else - am_cv_CC_dependencies_compiler_type=none -fi - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_CC_dependencies_compiler_type" >&5 -$as_echo "$am_cv_CC_dependencies_compiler_type" >&6; } -CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type - - if - test "x$enable_dependency_tracking" != xno \ - && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then - am__fastdepCC_TRUE= - am__fastdepCC_FALSE='#' -else - am__fastdepCC_TRUE='#' - am__fastdepCC_FALSE= -fi - - -# By default we simply use the C compiler to build assembly code. - -test "${CCAS+set}" = set || CCAS=$CC -test "${CCASFLAGS+set}" = set || CCASFLAGS=$CFLAGS - - - -depcc="$CCAS" am_compiler_list= - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5 -$as_echo_n "checking dependency style of $depcc... " >&6; } -if ${am_cv_CCAS_dependencies_compiler_type+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then - # We make a subdir and do the tests there. Otherwise we can end up - # making bogus files that we don't know about and never remove. For - # instance it was reported that on HP-UX the gcc test will end up - # making a dummy file named 'D' -- because '-MD' means "put the output - # in D". - rm -rf conftest.dir - mkdir conftest.dir - # Copy depcomp to subdir because otherwise we won't find it if we're - # using a relative directory. - cp "$am_depcomp" conftest.dir - cd conftest.dir - # We will build objects and dependencies in a subdirectory because - # it helps to detect inapplicable dependency modes. For instance - # both Tru64's cc and ICC support -MD to output dependencies as a - # side effect of compilation, but ICC will put the dependencies in - # the current directory while Tru64 will put them in the object - # directory. - mkdir sub - - am_cv_CCAS_dependencies_compiler_type=none - if test "$am_compiler_list" = ""; then - am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp` - fi - am__universal=false - - - for depmode in $am_compiler_list; do - # Setup a source with many dependencies, because some compilers - # like to wrap large dependency lists on column 80 (with \), and - # we should not choose a depcomp mode which is confused by this. - # - # We need to recreate these files for each test, as the compiler may - # overwrite some of them when testing with obscure command lines. - # This happens at least with the AIX C compiler. - : > sub/conftest.c - for i in 1 2 3 4 5 6; do - echo '#include "conftst'$i'.h"' >> sub/conftest.c - # Using ": > sub/conftst$i.h" creates only sub/conftst1.h with - # Solaris 10 /bin/sh. - echo '/* dummy */' > sub/conftst$i.h - done - echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf - - # We check with '-c' and '-o' for the sake of the "dashmstdout" - # mode. It turns out that the SunPro C++ compiler does not properly - # handle '-M -o', and we need to detect this. Also, some Intel - # versions had trouble with output in subdirs. - am__obj=sub/conftest.${OBJEXT-o} - am__minus_obj="-o $am__obj" - case $depmode in - gcc) - # This depmode causes a compiler race in universal mode. - test "$am__universal" = false || continue - ;; - nosideeffect) - # After this tag, mechanisms are not by side-effect, so they'll - # only be used when explicitly requested. - if test "x$enable_dependency_tracking" = xyes; then - continue - else - break - fi - ;; - msvc7 | msvc7msys | msvisualcpp | msvcmsys) - # This compiler won't grok '-c -o', but also, the minuso test has - # not run yet. These depmodes are late enough in the game, and - # so weak that their functioning should not be impacted. - am__obj=conftest.${OBJEXT-o} - am__minus_obj= - ;; - none) break ;; - esac - if depmode=$depmode \ - source=sub/conftest.c object=$am__obj \ - depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ - $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \ - >/dev/null 2>conftest.err && - grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && - grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && - grep $am__obj sub/conftest.Po > /dev/null 2>&1 && - ${MAKE-make} -s -f confmf > /dev/null 2>&1; then - # icc doesn't choke on unknown options, it will just issue warnings - # or remarks (even with -Werror). So we grep stderr for any message - # that says an option was ignored or not supported. - # When given -MP, icc 7.0 and 7.1 complain thusly: - # icc: Command line warning: ignoring option '-M'; no argument required - # The diagnosis changed in icc 8.0: - # icc: Command line remark: option '-MP' not supported - if (grep 'ignoring option' conftest.err || - grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else - am_cv_CCAS_dependencies_compiler_type=$depmode - break - fi - fi - done - - cd .. - rm -rf conftest.dir -else - am_cv_CCAS_dependencies_compiler_type=none -fi - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_CCAS_dependencies_compiler_type" >&5 -$as_echo "$am_cv_CCAS_dependencies_compiler_type" >&6; } -CCASDEPMODE=depmode=$am_cv_CCAS_dependencies_compiler_type - - if - test "x$enable_dependency_tracking" != xno \ - && test "$am_cv_CCAS_dependencies_compiler_type" = gcc3; then - am__fastdepCCAS_TRUE= - am__fastdepCCAS_FALSE='#' -else - am__fastdepCCAS_TRUE='#' - am__fastdepCCAS_FALSE= -fi - - -# Make sure we can run config.sub. -$SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 || - as_fn_error $? "cannot run $SHELL $ac_aux_dir/config.sub" "$LINENO" 5 - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking build system type" >&5 -$as_echo_n "checking build system type... " >&6; } -if ${ac_cv_build+:} false; then : - $as_echo_n "(cached) " >&6 -else - ac_build_alias=$build_alias -test "x$ac_build_alias" = x && - ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"` -test "x$ac_build_alias" = x && - as_fn_error $? "cannot guess build type; you must specify one" "$LINENO" 5 -ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` || - as_fn_error $? "$SHELL $ac_aux_dir/config.sub $ac_build_alias failed" "$LINENO" 5 - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_build" >&5 -$as_echo "$ac_cv_build" >&6; } -case $ac_cv_build in -*-*-*) ;; -*) as_fn_error $? "invalid value of canonical build" "$LINENO" 5;; -esac -build=$ac_cv_build -ac_save_IFS=$IFS; IFS='-' -set x $ac_cv_build -shift -build_cpu=$1 -build_vendor=$2 -shift; shift -# Remember, the first character of IFS is used to create $*, -# except with old shells: -build_os=$* -IFS=$ac_save_IFS -case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking host system type" >&5 -$as_echo_n "checking host system type... " >&6; } -if ${ac_cv_host+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test "x$host_alias" = x; then - ac_cv_host=$ac_cv_build -else - ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` || - as_fn_error $? "$SHELL $ac_aux_dir/config.sub $host_alias failed" "$LINENO" 5 -fi - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_host" >&5 -$as_echo "$ac_cv_host" >&6; } -case $ac_cv_host in -*-*-*) ;; -*) as_fn_error $? "invalid value of canonical host" "$LINENO" 5;; -esac -host=$ac_cv_host -ac_save_IFS=$IFS; IFS='-' -set x $ac_cv_host -shift -host_cpu=$1 -host_vendor=$2 -shift; shift -# Remember, the first character of IFS is used to create $*, -# except with old shells: -host_os=$* -IFS=$ac_save_IFS -case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a sed that does not truncate output" >&5 -$as_echo_n "checking for a sed that does not truncate output... " >&6; } -if ${ac_cv_path_SED+:} false; then : - $as_echo_n "(cached) " >&6 -else - ac_script=s/aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa/bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb/ - for ac_i in 1 2 3 4 5 6 7; do - ac_script="$ac_script$as_nl$ac_script" - done - echo "$ac_script" 2>/dev/null | sed 99q >conftest.sed - { ac_script=; unset ac_script;} - if test -z "$SED"; then - ac_path_SED_found=false - # Loop through the user's path and test for each of PROGNAME-LIST - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_prog in sed gsed; do - for ac_exec_ext in '' $ac_executable_extensions; do - ac_path_SED="$as_dir/$ac_prog$ac_exec_ext" - as_fn_executable_p "$ac_path_SED" || continue -# Check for GNU ac_path_SED and select it if it is found. - # Check for GNU $ac_path_SED -case `"$ac_path_SED" --version 2>&1` in -*GNU*) - ac_cv_path_SED="$ac_path_SED" ac_path_SED_found=:;; -*) - ac_count=0 - $as_echo_n 0123456789 >"conftest.in" - while : - do - cat "conftest.in" "conftest.in" >"conftest.tmp" - mv "conftest.tmp" "conftest.in" - cp "conftest.in" "conftest.nl" - $as_echo '' >> "conftest.nl" - "$ac_path_SED" -f conftest.sed < "conftest.nl" >"conftest.out" 2>/dev/null || break - diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break - as_fn_arith $ac_count + 1 && ac_count=$as_val - if test $ac_count -gt ${ac_path_SED_max-0}; then - # Best one so far, save it but keep looking for a better one - ac_cv_path_SED="$ac_path_SED" - ac_path_SED_max=$ac_count - fi - # 10*(2^10) chars as input seems more than enough - test $ac_count -gt 10 && break - done - rm -f conftest.in conftest.tmp conftest.nl conftest.out;; -esac - - $ac_path_SED_found && break 3 - done - done - done -IFS=$as_save_IFS - if test -z "$ac_cv_path_SED"; then - as_fn_error $? "no acceptable sed could be found in \$PATH" "$LINENO" 5 - fi -else - ac_cv_path_SED=$SED -fi - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_SED" >&5 -$as_echo "$ac_cv_path_SED" >&6; } - SED="$ac_cv_path_SED" - rm -f conftest.sed - -test -z "$SED" && SED=sed -Xsed="$SED -e 1s/^X//" - - - - - - - - - - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for grep that handles long lines and -e" >&5 -$as_echo_n "checking for grep that handles long lines and -e... " >&6; } -if ${ac_cv_path_GREP+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -z "$GREP"; then - ac_path_GREP_found=false - # Loop through the user's path and test for each of PROGNAME-LIST - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_prog in grep ggrep; do - for ac_exec_ext in '' $ac_executable_extensions; do - ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext" - as_fn_executable_p "$ac_path_GREP" || continue -# Check for GNU ac_path_GREP and select it if it is found. - # Check for GNU $ac_path_GREP -case `"$ac_path_GREP" --version 2>&1` in -*GNU*) - ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_found=:;; -*) - ac_count=0 - $as_echo_n 0123456789 >"conftest.in" - while : - do - cat "conftest.in" "conftest.in" >"conftest.tmp" - mv "conftest.tmp" "conftest.in" - cp "conftest.in" "conftest.nl" - $as_echo 'GREP' >> "conftest.nl" - "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break - diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break - as_fn_arith $ac_count + 1 && ac_count=$as_val - if test $ac_count -gt ${ac_path_GREP_max-0}; then - # Best one so far, save it but keep looking for a better one - ac_cv_path_GREP="$ac_path_GREP" - ac_path_GREP_max=$ac_count - fi - # 10*(2^10) chars as input seems more than enough - test $ac_count -gt 10 && break - done - rm -f conftest.in conftest.tmp conftest.nl conftest.out;; -esac - - $ac_path_GREP_found && break 3 - done - done - done -IFS=$as_save_IFS - if test -z "$ac_cv_path_GREP"; then - as_fn_error $? "no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5 - fi -else - ac_cv_path_GREP=$GREP -fi - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_GREP" >&5 -$as_echo "$ac_cv_path_GREP" >&6; } - GREP="$ac_cv_path_GREP" - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for egrep" >&5 -$as_echo_n "checking for egrep... " >&6; } -if ${ac_cv_path_EGREP+:} false; then : - $as_echo_n "(cached) " >&6 -else - if echo a | $GREP -E '(a|b)' >/dev/null 2>&1 - then ac_cv_path_EGREP="$GREP -E" - else - if test -z "$EGREP"; then - ac_path_EGREP_found=false - # Loop through the user's path and test for each of PROGNAME-LIST - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_prog in egrep; do - for ac_exec_ext in '' $ac_executable_extensions; do - ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext" - as_fn_executable_p "$ac_path_EGREP" || continue -# Check for GNU ac_path_EGREP and select it if it is found. - # Check for GNU $ac_path_EGREP -case `"$ac_path_EGREP" --version 2>&1` in -*GNU*) - ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_found=:;; -*) - ac_count=0 - $as_echo_n 0123456789 >"conftest.in" - while : - do - cat "conftest.in" "conftest.in" >"conftest.tmp" - mv "conftest.tmp" "conftest.in" - cp "conftest.in" "conftest.nl" - $as_echo 'EGREP' >> "conftest.nl" - "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break - diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break - as_fn_arith $ac_count + 1 && ac_count=$as_val - if test $ac_count -gt ${ac_path_EGREP_max-0}; then - # Best one so far, save it but keep looking for a better one - ac_cv_path_EGREP="$ac_path_EGREP" - ac_path_EGREP_max=$ac_count - fi - # 10*(2^10) chars as input seems more than enough - test $ac_count -gt 10 && break - done - rm -f conftest.in conftest.tmp conftest.nl conftest.out;; -esac - - $ac_path_EGREP_found && break 3 - done - done - done -IFS=$as_save_IFS - if test -z "$ac_cv_path_EGREP"; then - as_fn_error $? "no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5 - fi -else - ac_cv_path_EGREP=$EGREP -fi - - fi -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_EGREP" >&5 -$as_echo "$ac_cv_path_EGREP" >&6; } - EGREP="$ac_cv_path_EGREP" - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for fgrep" >&5 -$as_echo_n "checking for fgrep... " >&6; } -if ${ac_cv_path_FGREP+:} false; then : - $as_echo_n "(cached) " >&6 -else - if echo 'ab*c' | $GREP -F 'ab*c' >/dev/null 2>&1 - then ac_cv_path_FGREP="$GREP -F" - else - if test -z "$FGREP"; then - ac_path_FGREP_found=false - # Loop through the user's path and test for each of PROGNAME-LIST - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_prog in fgrep; do - for ac_exec_ext in '' $ac_executable_extensions; do - ac_path_FGREP="$as_dir/$ac_prog$ac_exec_ext" - as_fn_executable_p "$ac_path_FGREP" || continue -# Check for GNU ac_path_FGREP and select it if it is found. - # Check for GNU $ac_path_FGREP -case `"$ac_path_FGREP" --version 2>&1` in -*GNU*) - ac_cv_path_FGREP="$ac_path_FGREP" ac_path_FGREP_found=:;; -*) - ac_count=0 - $as_echo_n 0123456789 >"conftest.in" - while : - do - cat "conftest.in" "conftest.in" >"conftest.tmp" - mv "conftest.tmp" "conftest.in" - cp "conftest.in" "conftest.nl" - $as_echo 'FGREP' >> "conftest.nl" - "$ac_path_FGREP" FGREP < "conftest.nl" >"conftest.out" 2>/dev/null || break - diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break - as_fn_arith $ac_count + 1 && ac_count=$as_val - if test $ac_count -gt ${ac_path_FGREP_max-0}; then - # Best one so far, save it but keep looking for a better one - ac_cv_path_FGREP="$ac_path_FGREP" - ac_path_FGREP_max=$ac_count - fi - # 10*(2^10) chars as input seems more than enough - test $ac_count -gt 10 && break - done - rm -f conftest.in conftest.tmp conftest.nl conftest.out;; -esac - - $ac_path_FGREP_found && break 3 - done - done - done -IFS=$as_save_IFS - if test -z "$ac_cv_path_FGREP"; then - as_fn_error $? "no acceptable fgrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5 - fi -else - ac_cv_path_FGREP=$FGREP -fi - - fi -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_FGREP" >&5 -$as_echo "$ac_cv_path_FGREP" >&6; } - FGREP="$ac_cv_path_FGREP" - - -test -z "$GREP" && GREP=grep - - - - - - - - - - - - - - - - - -ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' -ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO -ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to print strings" >&5 -$as_echo_n "checking how to print strings... " >&6; } -# Test print first, because it will be a builtin if present. -if test "X`( print -r -- -n ) 2>/dev/null`" = X-n && \ - test "X`print -r -- $ECHO 2>/dev/null`" = "X$ECHO"; then - ECHO='print -r --' -elif test "X`printf %s $ECHO 2>/dev/null`" = "X$ECHO"; then - ECHO='printf %s\n' -else - # Use this function as a fallback that always works. - func_fallback_echo () - { - eval 'cat <<_LTECHO_EOF -$1 -_LTECHO_EOF' - } - ECHO='func_fallback_echo' -fi - -# func_echo_all arg... -# Invoke $ECHO with all args, space-separated. -func_echo_all () -{ - $ECHO "" -} - -case $ECHO in - printf*) { $as_echo "$as_me:${as_lineno-$LINENO}: result: printf" >&5 -$as_echo "printf" >&6; } ;; - print*) { $as_echo "$as_me:${as_lineno-$LINENO}: result: print -r" >&5 -$as_echo "print -r" >&6; } ;; - *) { $as_echo "$as_me:${as_lineno-$LINENO}: result: cat" >&5 -$as_echo "cat" >&6; } ;; -esac - - - - - - - - - - - - - - - - -# Check whether --with-gnu-ld was given. -if test "${with_gnu_ld+set}" = set; then : - withval=$with_gnu_ld; test no = "$withval" || with_gnu_ld=yes -else - with_gnu_ld=no -fi - -ac_prog=ld -if test yes = "$GCC"; then - # Check if gcc -print-prog-name=ld gives a path. - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ld used by $CC" >&5 -$as_echo_n "checking for ld used by $CC... " >&6; } - case $host in - *-*-mingw*) - # gcc leaves a trailing carriage return, which upsets mingw - ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; - *) - ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; - esac - case $ac_prog in - # Accept absolute paths. - [\\/]* | ?:[\\/]*) - re_direlt='/[^/][^/]*/\.\./' - # Canonicalize the pathname of ld - ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'` - while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do - ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"` - done - test -z "$LD" && LD=$ac_prog - ;; - "") - # If it fails, then pretend we aren't using GCC. - ac_prog=ld - ;; - *) - # If it is relative, then search for the first ld in PATH. - with_gnu_ld=unknown - ;; - esac -elif test yes = "$with_gnu_ld"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU ld" >&5 -$as_echo_n "checking for GNU ld... " >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for non-GNU ld" >&5 -$as_echo_n "checking for non-GNU ld... " >&6; } -fi -if ${lt_cv_path_LD+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -z "$LD"; then - lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR - for ac_dir in $PATH; do - IFS=$lt_save_ifs - test -z "$ac_dir" && ac_dir=. - if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then - lt_cv_path_LD=$ac_dir/$ac_prog - # Check to see if the program is GNU ld. I'd rather use --version, - # but apparently some variants of GNU ld only accept -v. - # Break only if it was the GNU/non-GNU ld that we prefer. - case `"$lt_cv_path_LD" -v 2>&1 &5 -$as_echo "$LD" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi -test -z "$LD" && as_fn_error $? "no acceptable ld found in \$PATH" "$LINENO" 5 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if the linker ($LD) is GNU ld" >&5 -$as_echo_n "checking if the linker ($LD) is GNU ld... " >&6; } -if ${lt_cv_prog_gnu_ld+:} false; then : - $as_echo_n "(cached) " >&6 -else - # I'd rather use --version here, but apparently some GNU lds only accept -v. -case `$LD -v 2>&1 &5 -$as_echo "$lt_cv_prog_gnu_ld" >&6; } -with_gnu_ld=$lt_cv_prog_gnu_ld - - - - - - - - - -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to run the C preprocessor" >&5 -$as_echo_n "checking how to run the C preprocessor... " >&6; } -# On Suns, sometimes $CPP names a directory. -if test -n "$CPP" && test -d "$CPP"; then - CPP= -fi -if test -z "$CPP"; then - if ${ac_cv_prog_CPP+:} false; then : - $as_echo_n "(cached) " >&6 -else - # Double quotes because CPP needs to be expanded - for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp" - do - ac_preproc_ok=false -for ac_c_preproc_warn_flag in '' yes -do - # Use a header file that comes with gcc, so configuring glibc - # with a fresh cross-compiler works. - # Prefer to if __STDC__ is defined, since - # exists even on freestanding compilers. - # On the NeXT, cc -E runs the code through the compiler's parser, - # not just through cpp. "Syntax error" is here to catch this case. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#ifdef __STDC__ -# include -#else -# include -#endif - Syntax error -_ACEOF -if ac_fn_c_try_cpp "$LINENO"; then : - -else - # Broken: fails on valid input. -continue -fi -rm -f conftest.err conftest.i conftest.$ac_ext - - # OK, works on sane cases. Now check whether nonexistent headers - # can be detected and how. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include -_ACEOF -if ac_fn_c_try_cpp "$LINENO"; then : - # Broken: success on invalid input. -continue -else - # Passes both tests. -ac_preproc_ok=: -break -fi -rm -f conftest.err conftest.i conftest.$ac_ext - -done -# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. -rm -f conftest.i conftest.err conftest.$ac_ext -if $ac_preproc_ok; then : - break -fi - - done - ac_cv_prog_CPP=$CPP - -fi - CPP=$ac_cv_prog_CPP -else - ac_cv_prog_CPP=$CPP -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $CPP" >&5 -$as_echo "$CPP" >&6; } -ac_preproc_ok=false -for ac_c_preproc_warn_flag in '' yes -do - # Use a header file that comes with gcc, so configuring glibc - # with a fresh cross-compiler works. - # Prefer to if __STDC__ is defined, since - # exists even on freestanding compilers. - # On the NeXT, cc -E runs the code through the compiler's parser, - # not just through cpp. "Syntax error" is here to catch this case. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#ifdef __STDC__ -# include -#else -# include -#endif - Syntax error -_ACEOF -if ac_fn_c_try_cpp "$LINENO"; then : - -else - # Broken: fails on valid input. -continue -fi -rm -f conftest.err conftest.i conftest.$ac_ext - - # OK, works on sane cases. Now check whether nonexistent headers - # can be detected and how. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include -_ACEOF -if ac_fn_c_try_cpp "$LINENO"; then : - # Broken: success on invalid input. -continue -else - # Passes both tests. -ac_preproc_ok=: -break -fi -rm -f conftest.err conftest.i conftest.$ac_ext - -done -# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. -rm -f conftest.i conftest.err conftest.$ac_ext -if $ac_preproc_ok; then : - -else - { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error $? "C preprocessor \"$CPP\" fails sanity check -See \`config.log' for more details" "$LINENO" 5; } -fi - -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - -for ac_prog in gawk mawk nawk awk -do - # Extract the first word of "$ac_prog", so it can be a program name with args. -set dummy $ac_prog; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_AWK+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$AWK"; then - ac_cv_prog_AWK="$AWK" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_AWK="$ac_prog" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -AWK=$ac_cv_prog_AWK -if test -n "$AWK"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AWK" >&5 -$as_echo "$AWK" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - test -n "$AWK" && break -done - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ln -s works" >&5 -$as_echo_n "checking whether ln -s works... " >&6; } -LN_S=$as_ln_s -if test "$LN_S" = "ln -s"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -$as_echo "yes" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no, using $LN_S" >&5 -$as_echo "no, using $LN_S" >&6; } -fi - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ${MAKE-make} sets \$(MAKE)" >&5 -$as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; } -set x ${MAKE-make} -ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'` -if eval \${ac_cv_prog_make_${ac_make}_set+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat >conftest.make <<\_ACEOF -SHELL = /bin/sh -all: - @echo '@@@%%%=$(MAKE)=@@@%%%' -_ACEOF -# GNU make sometimes prints "make[1]: Entering ...", which would confuse us. -case `${MAKE-make} -f conftest.make 2>/dev/null` in - *@@@%%%=?*=@@@%%%*) - eval ac_cv_prog_make_${ac_make}_set=yes;; - *) - eval ac_cv_prog_make_${ac_make}_set=no;; -esac -rm -f conftest.make -fi -if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -$as_echo "yes" >&6; } - SET_MAKE= -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } - SET_MAKE="MAKE=${MAKE-make}" -fi - - -case `pwd` in - *\ * | *\ *) - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&5 -$as_echo "$as_me: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&2;} ;; -esac - - - -macro_version='2.4.6' -macro_revision='2.4.6' - - - - - - - - - - - - - -ltmain=$ac_aux_dir/ltmain.sh - -# Backslashify metacharacters that are still active within -# double-quoted strings. -sed_quote_subst='s/\(["`$\\]\)/\\\1/g' - -# Same as above, but do not quote variable references. -double_quote_subst='s/\(["`\\]\)/\\\1/g' - -# Sed substitution to delay expansion of an escaped shell variable in a -# double_quote_subst'ed string. -delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g' - -# Sed substitution to delay expansion of an escaped single quote. -delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g' - -# Sed substitution to avoid accidental globbing in evaled expressions -no_glob_subst='s/\*/\\\*/g' - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for BSD- or MS-compatible name lister (nm)" >&5 -$as_echo_n "checking for BSD- or MS-compatible name lister (nm)... " >&6; } -if ${lt_cv_path_NM+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$NM"; then - # Let the user override the test. - lt_cv_path_NM=$NM -else - lt_nm_to_check=${ac_tool_prefix}nm - if test -n "$ac_tool_prefix" && test "$build" = "$host"; then - lt_nm_to_check="$lt_nm_to_check nm" - fi - for lt_tmp_nm in $lt_nm_to_check; do - lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR - for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do - IFS=$lt_save_ifs - test -z "$ac_dir" && ac_dir=. - tmp_nm=$ac_dir/$lt_tmp_nm - if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext"; then - # Check to see if the nm accepts a BSD-compat flag. - # Adding the 'sed 1q' prevents false positives on HP-UX, which says: - # nm: unknown option "B" ignored - # Tru64's nm complains that /dev/null is an invalid object file - # MSYS converts /dev/null to NUL, MinGW nm treats NUL as empty - case $build_os in - mingw*) lt_bad_file=conftest.nm/nofile ;; - *) lt_bad_file=/dev/null ;; - esac - case `"$tmp_nm" -B $lt_bad_file 2>&1 | sed '1q'` in - *$lt_bad_file* | *'Invalid file or object type'*) - lt_cv_path_NM="$tmp_nm -B" - break 2 - ;; - *) - case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in - */dev/null*) - lt_cv_path_NM="$tmp_nm -p" - break 2 - ;; - *) - lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but - continue # so that we can try to find one that supports BSD flags - ;; - esac - ;; - esac - fi - done - IFS=$lt_save_ifs - done - : ${lt_cv_path_NM=no} -fi -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_NM" >&5 -$as_echo "$lt_cv_path_NM" >&6; } -if test no != "$lt_cv_path_NM"; then - NM=$lt_cv_path_NM -else - # Didn't find any BSD compatible name lister, look for dumpbin. - if test -n "$DUMPBIN"; then : - # Let the user override the test. - else - if test -n "$ac_tool_prefix"; then - for ac_prog in dumpbin "link -dump" - do - # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. -set dummy $ac_tool_prefix$ac_prog; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_DUMPBIN+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$DUMPBIN"; then - ac_cv_prog_DUMPBIN="$DUMPBIN" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_DUMPBIN="$ac_tool_prefix$ac_prog" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -DUMPBIN=$ac_cv_prog_DUMPBIN -if test -n "$DUMPBIN"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DUMPBIN" >&5 -$as_echo "$DUMPBIN" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - test -n "$DUMPBIN" && break - done -fi -if test -z "$DUMPBIN"; then - ac_ct_DUMPBIN=$DUMPBIN - for ac_prog in dumpbin "link -dump" -do - # Extract the first word of "$ac_prog", so it can be a program name with args. -set dummy $ac_prog; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_DUMPBIN+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_DUMPBIN"; then - ac_cv_prog_ac_ct_DUMPBIN="$ac_ct_DUMPBIN" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_DUMPBIN="$ac_prog" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -ac_ct_DUMPBIN=$ac_cv_prog_ac_ct_DUMPBIN -if test -n "$ac_ct_DUMPBIN"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DUMPBIN" >&5 -$as_echo "$ac_ct_DUMPBIN" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - test -n "$ac_ct_DUMPBIN" && break -done - - if test "x$ac_ct_DUMPBIN" = x; then - DUMPBIN=":" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - DUMPBIN=$ac_ct_DUMPBIN - fi -fi - - case `$DUMPBIN -symbols -headers /dev/null 2>&1 | sed '1q'` in - *COFF*) - DUMPBIN="$DUMPBIN -symbols -headers" - ;; - *) - DUMPBIN=: - ;; - esac - fi - - if test : != "$DUMPBIN"; then - NM=$DUMPBIN - fi -fi -test -z "$NM" && NM=nm - - - - - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking the name lister ($NM) interface" >&5 -$as_echo_n "checking the name lister ($NM) interface... " >&6; } -if ${lt_cv_nm_interface+:} false; then : - $as_echo_n "(cached) " >&6 -else - lt_cv_nm_interface="BSD nm" - echo "int some_variable = 0;" > conftest.$ac_ext - (eval echo "\"\$as_me:$LINENO: $ac_compile\"" >&5) - (eval "$ac_compile" 2>conftest.err) - cat conftest.err >&5 - (eval echo "\"\$as_me:$LINENO: $NM \\\"conftest.$ac_objext\\\"\"" >&5) - (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out) - cat conftest.err >&5 - (eval echo "\"\$as_me:$LINENO: output\"" >&5) - cat conftest.out >&5 - if $GREP 'External.*some_variable' conftest.out > /dev/null; then - lt_cv_nm_interface="MS dumpbin" - fi - rm -f conftest* -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_nm_interface" >&5 -$as_echo "$lt_cv_nm_interface" >&6; } - -# find the maximum length of command line arguments -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking the maximum length of command line arguments" >&5 -$as_echo_n "checking the maximum length of command line arguments... " >&6; } -if ${lt_cv_sys_max_cmd_len+:} false; then : - $as_echo_n "(cached) " >&6 -else - i=0 - teststring=ABCD - - case $build_os in - msdosdjgpp*) - # On DJGPP, this test can blow up pretty badly due to problems in libc - # (any single argument exceeding 2000 bytes causes a buffer overrun - # during glob expansion). Even if it were fixed, the result of this - # check would be larger than it should be. - lt_cv_sys_max_cmd_len=12288; # 12K is about right - ;; - - gnu*) - # Under GNU Hurd, this test is not required because there is - # no limit to the length of command line arguments. - # Libtool will interpret -1 as no limit whatsoever - lt_cv_sys_max_cmd_len=-1; - ;; - - cygwin* | mingw* | cegcc*) - # On Win9x/ME, this test blows up -- it succeeds, but takes - # about 5 minutes as the teststring grows exponentially. - # Worse, since 9x/ME are not pre-emptively multitasking, - # you end up with a "frozen" computer, even though with patience - # the test eventually succeeds (with a max line length of 256k). - # Instead, let's just punt: use the minimum linelength reported by - # all of the supported platforms: 8192 (on NT/2K/XP). - lt_cv_sys_max_cmd_len=8192; - ;; - - mint*) - # On MiNT this can take a long time and run out of memory. - lt_cv_sys_max_cmd_len=8192; - ;; - - amigaos*) - # On AmigaOS with pdksh, this test takes hours, literally. - # So we just punt and use a minimum line length of 8192. - lt_cv_sys_max_cmd_len=8192; - ;; - - bitrig* | darwin* | dragonfly* | freebsd* | netbsd* | openbsd*) - # This has been around since 386BSD, at least. Likely further. - if test -x /sbin/sysctl; then - lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax` - elif test -x /usr/sbin/sysctl; then - lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax` - else - lt_cv_sys_max_cmd_len=65536 # usable default for all BSDs - fi - # And add a safety zone - lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` - lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` - ;; - - interix*) - # We know the value 262144 and hardcode it with a safety zone (like BSD) - lt_cv_sys_max_cmd_len=196608 - ;; - - os2*) - # The test takes a long time on OS/2. - lt_cv_sys_max_cmd_len=8192 - ;; - - osf*) - # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure - # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not - # nice to cause kernel panics so lets avoid the loop below. - # First set a reasonable default. - lt_cv_sys_max_cmd_len=16384 - # - if test -x /sbin/sysconfig; then - case `/sbin/sysconfig -q proc exec_disable_arg_limit` in - *1*) lt_cv_sys_max_cmd_len=-1 ;; - esac - fi - ;; - sco3.2v5*) - lt_cv_sys_max_cmd_len=102400 - ;; - sysv5* | sco5v6* | sysv4.2uw2*) - kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null` - if test -n "$kargmax"; then - lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[ ]//'` - else - lt_cv_sys_max_cmd_len=32768 - fi - ;; - *) - lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null` - if test -n "$lt_cv_sys_max_cmd_len" && \ - test undefined != "$lt_cv_sys_max_cmd_len"; then - lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` - lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` - else - # Make teststring a little bigger before we do anything with it. - # a 1K string should be a reasonable start. - for i in 1 2 3 4 5 6 7 8; do - teststring=$teststring$teststring - done - SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}} - # If test is not a shell built-in, we'll probably end up computing a - # maximum length that is only half of the actual maximum length, but - # we can't tell. - while { test X`env echo "$teststring$teststring" 2>/dev/null` \ - = "X$teststring$teststring"; } >/dev/null 2>&1 && - test 17 != "$i" # 1/2 MB should be enough - do - i=`expr $i + 1` - teststring=$teststring$teststring - done - # Only check the string length outside the loop. - lt_cv_sys_max_cmd_len=`expr "X$teststring" : ".*" 2>&1` - teststring= - # Add a significant safety factor because C++ compilers can tack on - # massive amounts of additional arguments before passing them to the - # linker. It appears as though 1/2 is a usable value. - lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2` - fi - ;; - esac - -fi - -if test -n "$lt_cv_sys_max_cmd_len"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_sys_max_cmd_len" >&5 -$as_echo "$lt_cv_sys_max_cmd_len" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: none" >&5 -$as_echo "none" >&6; } -fi -max_cmd_len=$lt_cv_sys_max_cmd_len - - - - - - -: ${CP="cp -f"} -: ${MV="mv -f"} -: ${RM="rm -f"} - -if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then - lt_unset=unset -else - lt_unset=false -fi - - - - - -# test EBCDIC or ASCII -case `echo X|tr X '\101'` in - A) # ASCII based system - # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr - lt_SP2NL='tr \040 \012' - lt_NL2SP='tr \015\012 \040\040' - ;; - *) # EBCDIC based system - lt_SP2NL='tr \100 \n' - lt_NL2SP='tr \r\n \100\100' - ;; -esac - - - - - - - - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to convert $build file names to $host format" >&5 -$as_echo_n "checking how to convert $build file names to $host format... " >&6; } -if ${lt_cv_to_host_file_cmd+:} false; then : - $as_echo_n "(cached) " >&6 -else - case $host in - *-*-mingw* ) - case $build in - *-*-mingw* ) # actually msys - lt_cv_to_host_file_cmd=func_convert_file_msys_to_w32 - ;; - *-*-cygwin* ) - lt_cv_to_host_file_cmd=func_convert_file_cygwin_to_w32 - ;; - * ) # otherwise, assume *nix - lt_cv_to_host_file_cmd=func_convert_file_nix_to_w32 - ;; - esac - ;; - *-*-cygwin* ) - case $build in - *-*-mingw* ) # actually msys - lt_cv_to_host_file_cmd=func_convert_file_msys_to_cygwin - ;; - *-*-cygwin* ) - lt_cv_to_host_file_cmd=func_convert_file_noop - ;; - * ) # otherwise, assume *nix - lt_cv_to_host_file_cmd=func_convert_file_nix_to_cygwin - ;; - esac - ;; - * ) # unhandled hosts (and "normal" native builds) - lt_cv_to_host_file_cmd=func_convert_file_noop - ;; -esac - -fi - -to_host_file_cmd=$lt_cv_to_host_file_cmd -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_to_host_file_cmd" >&5 -$as_echo "$lt_cv_to_host_file_cmd" >&6; } - - - - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to convert $build file names to toolchain format" >&5 -$as_echo_n "checking how to convert $build file names to toolchain format... " >&6; } -if ${lt_cv_to_tool_file_cmd+:} false; then : - $as_echo_n "(cached) " >&6 -else - #assume ordinary cross tools, or native build. -lt_cv_to_tool_file_cmd=func_convert_file_noop -case $host in - *-*-mingw* ) - case $build in - *-*-mingw* ) # actually msys - lt_cv_to_tool_file_cmd=func_convert_file_msys_to_w32 - ;; - esac - ;; -esac - -fi - -to_tool_file_cmd=$lt_cv_to_tool_file_cmd -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_to_tool_file_cmd" >&5 -$as_echo "$lt_cv_to_tool_file_cmd" >&6; } - - - - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $LD option to reload object files" >&5 -$as_echo_n "checking for $LD option to reload object files... " >&6; } -if ${lt_cv_ld_reload_flag+:} false; then : - $as_echo_n "(cached) " >&6 -else - lt_cv_ld_reload_flag='-r' -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_reload_flag" >&5 -$as_echo "$lt_cv_ld_reload_flag" >&6; } -reload_flag=$lt_cv_ld_reload_flag -case $reload_flag in -"" | " "*) ;; -*) reload_flag=" $reload_flag" ;; -esac -reload_cmds='$LD$reload_flag -o $output$reload_objs' -case $host_os in - cygwin* | mingw* | pw32* | cegcc*) - if test yes != "$GCC"; then - reload_cmds=false - fi - ;; - darwin*) - if test yes = "$GCC"; then - reload_cmds='$LTCC $LTCFLAGS -nostdlib $wl-r -o $output$reload_objs' - else - reload_cmds='$LD$reload_flag -o $output$reload_objs' - fi - ;; -esac - - - - - - - - - -if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}objdump", so it can be a program name with args. -set dummy ${ac_tool_prefix}objdump; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_OBJDUMP+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$OBJDUMP"; then - ac_cv_prog_OBJDUMP="$OBJDUMP" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_OBJDUMP="${ac_tool_prefix}objdump" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -OBJDUMP=$ac_cv_prog_OBJDUMP -if test -n "$OBJDUMP"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OBJDUMP" >&5 -$as_echo "$OBJDUMP" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -fi -if test -z "$ac_cv_prog_OBJDUMP"; then - ac_ct_OBJDUMP=$OBJDUMP - # Extract the first word of "objdump", so it can be a program name with args. -set dummy objdump; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_OBJDUMP+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_OBJDUMP"; then - ac_cv_prog_ac_ct_OBJDUMP="$ac_ct_OBJDUMP" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_OBJDUMP="objdump" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -ac_ct_OBJDUMP=$ac_cv_prog_ac_ct_OBJDUMP -if test -n "$ac_ct_OBJDUMP"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OBJDUMP" >&5 -$as_echo "$ac_ct_OBJDUMP" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - if test "x$ac_ct_OBJDUMP" = x; then - OBJDUMP="false" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - OBJDUMP=$ac_ct_OBJDUMP - fi -else - OBJDUMP="$ac_cv_prog_OBJDUMP" -fi - -test -z "$OBJDUMP" && OBJDUMP=objdump - - - - - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to recognize dependent libraries" >&5 -$as_echo_n "checking how to recognize dependent libraries... " >&6; } -if ${lt_cv_deplibs_check_method+:} false; then : - $as_echo_n "(cached) " >&6 -else - lt_cv_file_magic_cmd='$MAGIC_CMD' -lt_cv_file_magic_test_file= -lt_cv_deplibs_check_method='unknown' -# Need to set the preceding variable on all platforms that support -# interlibrary dependencies. -# 'none' -- dependencies not supported. -# 'unknown' -- same as none, but documents that we really don't know. -# 'pass_all' -- all dependencies passed with no checks. -# 'test_compile' -- check by making test program. -# 'file_magic [[regex]]' -- check by looking for files in library path -# that responds to the $file_magic_cmd with a given extended regex. -# If you have 'file' or equivalent on your system and you're not sure -# whether 'pass_all' will *always* work, you probably want this one. - -case $host_os in -aix[4-9]*) - lt_cv_deplibs_check_method=pass_all - ;; - -beos*) - lt_cv_deplibs_check_method=pass_all - ;; - -bsdi[45]*) - lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)' - lt_cv_file_magic_cmd='/usr/bin/file -L' - lt_cv_file_magic_test_file=/shlib/libc.so - ;; - -cygwin*) - # func_win32_libid is a shell function defined in ltmain.sh - lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' - lt_cv_file_magic_cmd='func_win32_libid' - ;; - -mingw* | pw32*) - # Base MSYS/MinGW do not provide the 'file' command needed by - # func_win32_libid shell function, so use a weaker test based on 'objdump', - # unless we find 'file', for example because we are cross-compiling. - if ( file / ) >/dev/null 2>&1; then - lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' - lt_cv_file_magic_cmd='func_win32_libid' - else - # Keep this pattern in sync with the one in func_win32_libid. - lt_cv_deplibs_check_method='file_magic file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)' - lt_cv_file_magic_cmd='$OBJDUMP -f' - fi - ;; - -cegcc*) - # use the weaker test based on 'objdump'. See mingw*. - lt_cv_deplibs_check_method='file_magic file format pe-arm-.*little(.*architecture: arm)?' - lt_cv_file_magic_cmd='$OBJDUMP -f' - ;; - -darwin* | rhapsody*) - lt_cv_deplibs_check_method=pass_all - ;; - -freebsd* | dragonfly*) - if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then - case $host_cpu in - i*86 ) - # Not sure whether the presence of OpenBSD here was a mistake. - # Let's accept both of them until this is cleared up. - lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[3-9]86 (compact )?demand paged shared library' - lt_cv_file_magic_cmd=/usr/bin/file - lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` - ;; - esac - else - lt_cv_deplibs_check_method=pass_all - fi - ;; - -haiku*) - lt_cv_deplibs_check_method=pass_all - ;; - -hpux10.20* | hpux11*) - lt_cv_file_magic_cmd=/usr/bin/file - case $host_cpu in - ia64*) - lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - IA64' - lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so - ;; - hppa*64*) - lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF[ -][0-9][0-9])(-bit)?( [LM]SB)? shared object( file)?[, -]* PA-RISC [0-9]\.[0-9]' - lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl - ;; - *) - lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9]\.[0-9]) shared library' - lt_cv_file_magic_test_file=/usr/lib/libc.sl - ;; - esac - ;; - -interix[3-9]*) - # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here - lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|\.a)$' - ;; - -irix5* | irix6* | nonstopux*) - case $LD in - *-32|*"-32 ") libmagic=32-bit;; - *-n32|*"-n32 ") libmagic=N32;; - *-64|*"-64 ") libmagic=64-bit;; - *) libmagic=never-match;; - esac - lt_cv_deplibs_check_method=pass_all - ;; - -# This must be glibc/ELF. -linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*) - lt_cv_deplibs_check_method=pass_all - ;; - -netbsd*) - if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then - lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$' - else - lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|_pic\.a)$' - fi - ;; - -newos6*) - lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)' - lt_cv_file_magic_cmd=/usr/bin/file - lt_cv_file_magic_test_file=/usr/lib/libnls.so - ;; - -*nto* | *qnx*) - lt_cv_deplibs_check_method=pass_all - ;; - -openbsd* | bitrig*) - if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`"; then - lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|\.so|_pic\.a)$' - else - lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$' - fi - ;; - -osf3* | osf4* | osf5*) - lt_cv_deplibs_check_method=pass_all - ;; - -rdos*) - lt_cv_deplibs_check_method=pass_all - ;; - -solaris*) - lt_cv_deplibs_check_method=pass_all - ;; - -sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) - lt_cv_deplibs_check_method=pass_all - ;; - -sysv4 | sysv4.3*) - case $host_vendor in - motorola) - lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]' - lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*` - ;; - ncr) - lt_cv_deplibs_check_method=pass_all - ;; - sequent) - lt_cv_file_magic_cmd='/bin/file' - lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )' - ;; - sni) - lt_cv_file_magic_cmd='/bin/file' - lt_cv_deplibs_check_method="file_magic ELF [0-9][0-9]*-bit [LM]SB dynamic lib" - lt_cv_file_magic_test_file=/lib/libc.so - ;; - siemens) - lt_cv_deplibs_check_method=pass_all - ;; - pc) - lt_cv_deplibs_check_method=pass_all - ;; - esac - ;; - -tpf*) - lt_cv_deplibs_check_method=pass_all - ;; -os2*) - lt_cv_deplibs_check_method=pass_all - ;; -esac - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_deplibs_check_method" >&5 -$as_echo "$lt_cv_deplibs_check_method" >&6; } - -file_magic_glob= -want_nocaseglob=no -if test "$build" = "$host"; then - case $host_os in - mingw* | pw32*) - if ( shopt | grep nocaseglob ) >/dev/null 2>&1; then - want_nocaseglob=yes - else - file_magic_glob=`echo aAbBcCdDeEfFgGhHiIjJkKlLmMnNoOpPqQrRsStTuUvVwWxXyYzZ | $SED -e "s/\(..\)/s\/[\1]\/[\1]\/g;/g"` - fi - ;; - esac -fi - -file_magic_cmd=$lt_cv_file_magic_cmd -deplibs_check_method=$lt_cv_deplibs_check_method -test -z "$deplibs_check_method" && deplibs_check_method=unknown - - - - - - - - - - - - - - - - - - - - - - -if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}dlltool", so it can be a program name with args. -set dummy ${ac_tool_prefix}dlltool; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_DLLTOOL+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$DLLTOOL"; then - ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_DLLTOOL="${ac_tool_prefix}dlltool" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -DLLTOOL=$ac_cv_prog_DLLTOOL -if test -n "$DLLTOOL"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DLLTOOL" >&5 -$as_echo "$DLLTOOL" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -fi -if test -z "$ac_cv_prog_DLLTOOL"; then - ac_ct_DLLTOOL=$DLLTOOL - # Extract the first word of "dlltool", so it can be a program name with args. -set dummy dlltool; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_DLLTOOL+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_DLLTOOL"; then - ac_cv_prog_ac_ct_DLLTOOL="$ac_ct_DLLTOOL" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_DLLTOOL="dlltool" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -ac_ct_DLLTOOL=$ac_cv_prog_ac_ct_DLLTOOL -if test -n "$ac_ct_DLLTOOL"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DLLTOOL" >&5 -$as_echo "$ac_ct_DLLTOOL" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - if test "x$ac_ct_DLLTOOL" = x; then - DLLTOOL="false" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - DLLTOOL=$ac_ct_DLLTOOL - fi -else - DLLTOOL="$ac_cv_prog_DLLTOOL" -fi - -test -z "$DLLTOOL" && DLLTOOL=dlltool - - - - - - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to associate runtime and link libraries" >&5 -$as_echo_n "checking how to associate runtime and link libraries... " >&6; } -if ${lt_cv_sharedlib_from_linklib_cmd+:} false; then : - $as_echo_n "(cached) " >&6 -else - lt_cv_sharedlib_from_linklib_cmd='unknown' - -case $host_os in -cygwin* | mingw* | pw32* | cegcc*) - # two different shell functions defined in ltmain.sh; - # decide which one to use based on capabilities of $DLLTOOL - case `$DLLTOOL --help 2>&1` in - *--identify-strict*) - lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib - ;; - *) - lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib_fallback - ;; - esac - ;; -*) - # fallback: assume linklib IS sharedlib - lt_cv_sharedlib_from_linklib_cmd=$ECHO - ;; -esac - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_sharedlib_from_linklib_cmd" >&5 -$as_echo "$lt_cv_sharedlib_from_linklib_cmd" >&6; } -sharedlib_from_linklib_cmd=$lt_cv_sharedlib_from_linklib_cmd -test -z "$sharedlib_from_linklib_cmd" && sharedlib_from_linklib_cmd=$ECHO - - - - - - - - -if test -n "$ac_tool_prefix"; then - for ac_prog in ar - do - # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. -set dummy $ac_tool_prefix$ac_prog; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_AR+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$AR"; then - ac_cv_prog_AR="$AR" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_AR="$ac_tool_prefix$ac_prog" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -AR=$ac_cv_prog_AR -if test -n "$AR"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AR" >&5 -$as_echo "$AR" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - test -n "$AR" && break - done -fi -if test -z "$AR"; then - ac_ct_AR=$AR - for ac_prog in ar -do - # Extract the first word of "$ac_prog", so it can be a program name with args. -set dummy $ac_prog; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_AR+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_AR"; then - ac_cv_prog_ac_ct_AR="$ac_ct_AR" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_AR="$ac_prog" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -ac_ct_AR=$ac_cv_prog_ac_ct_AR -if test -n "$ac_ct_AR"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_AR" >&5 -$as_echo "$ac_ct_AR" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - test -n "$ac_ct_AR" && break -done - - if test "x$ac_ct_AR" = x; then - AR="false" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - AR=$ac_ct_AR - fi -fi - -: ${AR=ar} -: ${AR_FLAGS=cru} - - - - - - - - - - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for archiver @FILE support" >&5 -$as_echo_n "checking for archiver @FILE support... " >&6; } -if ${lt_cv_ar_at_file+:} false; then : - $as_echo_n "(cached) " >&6 -else - lt_cv_ar_at_file=no - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - echo conftest.$ac_objext > conftest.lst - lt_ar_try='$AR $AR_FLAGS libconftest.a @conftest.lst >&5' - { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$lt_ar_try\""; } >&5 - (eval $lt_ar_try) 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } - if test 0 -eq "$ac_status"; then - # Ensure the archiver fails upon bogus file names. - rm -f conftest.$ac_objext libconftest.a - { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$lt_ar_try\""; } >&5 - (eval $lt_ar_try) 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } - if test 0 -ne "$ac_status"; then - lt_cv_ar_at_file=@ - fi - fi - rm -f conftest.* libconftest.a - -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ar_at_file" >&5 -$as_echo "$lt_cv_ar_at_file" >&6; } - -if test no = "$lt_cv_ar_at_file"; then - archiver_list_spec= -else - archiver_list_spec=$lt_cv_ar_at_file -fi - - - - - - - -if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. -set dummy ${ac_tool_prefix}strip; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_STRIP+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$STRIP"; then - ac_cv_prog_STRIP="$STRIP" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_STRIP="${ac_tool_prefix}strip" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -STRIP=$ac_cv_prog_STRIP -if test -n "$STRIP"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5 -$as_echo "$STRIP" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -fi -if test -z "$ac_cv_prog_STRIP"; then - ac_ct_STRIP=$STRIP - # Extract the first word of "strip", so it can be a program name with args. -set dummy strip; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_STRIP+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_STRIP"; then - ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_STRIP="strip" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP -if test -n "$ac_ct_STRIP"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5 -$as_echo "$ac_ct_STRIP" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - if test "x$ac_ct_STRIP" = x; then - STRIP=":" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - STRIP=$ac_ct_STRIP - fi -else - STRIP="$ac_cv_prog_STRIP" -fi - -test -z "$STRIP" && STRIP=: - - - - - - -if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args. -set dummy ${ac_tool_prefix}ranlib; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_RANLIB+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$RANLIB"; then - ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -RANLIB=$ac_cv_prog_RANLIB -if test -n "$RANLIB"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $RANLIB" >&5 -$as_echo "$RANLIB" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -fi -if test -z "$ac_cv_prog_RANLIB"; then - ac_ct_RANLIB=$RANLIB - # Extract the first word of "ranlib", so it can be a program name with args. -set dummy ranlib; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_RANLIB+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_RANLIB"; then - ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_RANLIB="ranlib" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB -if test -n "$ac_ct_RANLIB"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_RANLIB" >&5 -$as_echo "$ac_ct_RANLIB" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - if test "x$ac_ct_RANLIB" = x; then - RANLIB=":" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - RANLIB=$ac_ct_RANLIB - fi -else - RANLIB="$ac_cv_prog_RANLIB" -fi - -test -z "$RANLIB" && RANLIB=: - - - - - - -# Determine commands to create old-style static archives. -old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs' -old_postinstall_cmds='chmod 644 $oldlib' -old_postuninstall_cmds= - -if test -n "$RANLIB"; then - case $host_os in - bitrig* | openbsd*) - old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$tool_oldlib" - ;; - *) - old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$tool_oldlib" - ;; - esac - old_archive_cmds="$old_archive_cmds~\$RANLIB \$tool_oldlib" -fi - -case $host_os in - darwin*) - lock_old_archive_extraction=yes ;; - *) - lock_old_archive_extraction=no ;; -esac - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -# If no C compiler was specified, use CC. -LTCC=${LTCC-"$CC"} - -# If no C compiler flags were specified, use CFLAGS. -LTCFLAGS=${LTCFLAGS-"$CFLAGS"} - -# Allow CC to be a program name with arguments. -compiler=$CC - - -# Check for command to grab the raw symbol name followed by C symbol from nm. -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking command to parse $NM output from $compiler object" >&5 -$as_echo_n "checking command to parse $NM output from $compiler object... " >&6; } -if ${lt_cv_sys_global_symbol_pipe+:} false; then : - $as_echo_n "(cached) " >&6 -else - -# These are sane defaults that work on at least a few old systems. -# [They come from Ultrix. What could be older than Ultrix?!! ;)] - -# Character class describing NM global symbol codes. -symcode='[BCDEGRST]' - -# Regexp to match symbols that can be accessed directly from C. -sympat='\([_A-Za-z][_A-Za-z0-9]*\)' - -# Define system-specific variables. -case $host_os in -aix*) - symcode='[BCDT]' - ;; -cygwin* | mingw* | pw32* | cegcc*) - symcode='[ABCDGISTW]' - ;; -hpux*) - if test ia64 = "$host_cpu"; then - symcode='[ABCDEGRST]' - fi - ;; -irix* | nonstopux*) - symcode='[BCDEGRST]' - ;; -osf*) - symcode='[BCDEGQRST]' - ;; -solaris*) - symcode='[BDRT]' - ;; -sco3.2v5*) - symcode='[DT]' - ;; -sysv4.2uw2*) - symcode='[DT]' - ;; -sysv5* | sco5v6* | unixware* | OpenUNIX*) - symcode='[ABDT]' - ;; -sysv4) - symcode='[DFNSTU]' - ;; -esac - -# If we're using GNU nm, then use its standard symbol codes. -case `$NM -V 2>&1` in -*GNU* | *'with BFD'*) - symcode='[ABCDGIRSTW]' ;; -esac - -if test "$lt_cv_nm_interface" = "MS dumpbin"; then - # Gets list of data symbols to import. - lt_cv_sys_global_symbol_to_import="sed -n -e 's/^I .* \(.*\)$/\1/p'" - # Adjust the below global symbol transforms to fixup imported variables. - lt_cdecl_hook=" -e 's/^I .* \(.*\)$/extern __declspec(dllimport) char \1;/p'" - lt_c_name_hook=" -e 's/^I .* \(.*\)$/ {\"\1\", (void *) 0},/p'" - lt_c_name_lib_hook="\ - -e 's/^I .* \(lib.*\)$/ {\"\1\", (void *) 0},/p'\ - -e 's/^I .* \(.*\)$/ {\"lib\1\", (void *) 0},/p'" -else - # Disable hooks by default. - lt_cv_sys_global_symbol_to_import= - lt_cdecl_hook= - lt_c_name_hook= - lt_c_name_lib_hook= -fi - -# Transform an extracted symbol line into a proper C declaration. -# Some systems (esp. on ia64) link data and code symbols differently, -# so use this general approach. -lt_cv_sys_global_symbol_to_cdecl="sed -n"\ -$lt_cdecl_hook\ -" -e 's/^T .* \(.*\)$/extern int \1();/p'"\ -" -e 's/^$symcode$symcode* .* \(.*\)$/extern char \1;/p'" - -# Transform an extracted symbol line into symbol name and symbol address -lt_cv_sys_global_symbol_to_c_name_address="sed -n"\ -$lt_c_name_hook\ -" -e 's/^: \(.*\) .*$/ {\"\1\", (void *) 0},/p'"\ -" -e 's/^$symcode$symcode* .* \(.*\)$/ {\"\1\", (void *) \&\1},/p'" - -# Transform an extracted symbol line into symbol name with lib prefix and -# symbol address. -lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n"\ -$lt_c_name_lib_hook\ -" -e 's/^: \(.*\) .*$/ {\"\1\", (void *) 0},/p'"\ -" -e 's/^$symcode$symcode* .* \(lib.*\)$/ {\"\1\", (void *) \&\1},/p'"\ -" -e 's/^$symcode$symcode* .* \(.*\)$/ {\"lib\1\", (void *) \&\1},/p'" - -# Handle CRLF in mingw tool chain -opt_cr= -case $build_os in -mingw*) - opt_cr=`$ECHO 'x\{0,1\}' | tr x '\015'` # option cr in regexp - ;; -esac - -# Try without a prefix underscore, then with it. -for ac_symprfx in "" "_"; do - - # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol. - symxfrm="\\1 $ac_symprfx\\2 \\2" - - # Write the raw and C identifiers. - if test "$lt_cv_nm_interface" = "MS dumpbin"; then - # Fake it for dumpbin and say T for any non-static function, - # D for any global variable and I for any imported variable. - # Also find C++ and __fastcall symbols from MSVC++, - # which start with @ or ?. - lt_cv_sys_global_symbol_pipe="$AWK '"\ -" {last_section=section; section=\$ 3};"\ -" /^COFF SYMBOL TABLE/{for(i in hide) delete hide[i]};"\ -" /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\ -" /^ *Symbol name *: /{split(\$ 0,sn,\":\"); si=substr(sn[2],2)};"\ -" /^ *Type *: code/{print \"T\",si,substr(si,length(prfx))};"\ -" /^ *Type *: data/{print \"I\",si,substr(si,length(prfx))};"\ -" \$ 0!~/External *\|/{next};"\ -" / 0+ UNDEF /{next}; / UNDEF \([^|]\)*()/{next};"\ -" {if(hide[section]) next};"\ -" {f=\"D\"}; \$ 0~/\(\).*\|/{f=\"T\"};"\ -" {split(\$ 0,a,/\||\r/); split(a[2],s)};"\ -" s[1]~/^[@?]/{print f,s[1],s[1]; next};"\ -" s[1]~prfx {split(s[1],t,\"@\"); print f,t[1],substr(t[1],length(prfx))}"\ -" ' prfx=^$ac_symprfx" - else - lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[ ]\($symcode$symcode*\)[ ][ ]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'" - fi - lt_cv_sys_global_symbol_pipe="$lt_cv_sys_global_symbol_pipe | sed '/ __gnu_lto/d'" - - # Check to see that the pipe works correctly. - pipe_works=no - - rm -f conftest* - cat > conftest.$ac_ext <<_LT_EOF -#ifdef __cplusplus -extern "C" { -#endif -char nm_test_var; -void nm_test_func(void); -void nm_test_func(void){} -#ifdef __cplusplus -} -#endif -int main(){nm_test_var='a';nm_test_func();return(0);} -_LT_EOF - - if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then - # Now try to grab the symbols. - nlist=conftest.nm - if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist\""; } >&5 - (eval $NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist) 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } && test -s "$nlist"; then - # Try sorting and uniquifying the output. - if sort "$nlist" | uniq > "$nlist"T; then - mv -f "$nlist"T "$nlist" - else - rm -f "$nlist"T - fi - - # Make sure that we snagged all the symbols we need. - if $GREP ' nm_test_var$' "$nlist" >/dev/null; then - if $GREP ' nm_test_func$' "$nlist" >/dev/null; then - cat <<_LT_EOF > conftest.$ac_ext -/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests. */ -#if defined _WIN32 || defined __CYGWIN__ || defined _WIN32_WCE -/* DATA imports from DLLs on WIN32 can't be const, because runtime - relocations are performed -- see ld's documentation on pseudo-relocs. */ -# define LT_DLSYM_CONST -#elif defined __osf__ -/* This system does not cope well with relocations in const data. */ -# define LT_DLSYM_CONST -#else -# define LT_DLSYM_CONST const -#endif - -#ifdef __cplusplus -extern "C" { -#endif - -_LT_EOF - # Now generate the symbol file. - eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | $GREP -v main >> conftest.$ac_ext' - - cat <<_LT_EOF >> conftest.$ac_ext - -/* The mapping between symbol names and symbols. */ -LT_DLSYM_CONST struct { - const char *name; - void *address; -} -lt__PROGRAM__LTX_preloaded_symbols[] = -{ - { "@PROGRAM@", (void *) 0 }, -_LT_EOF - $SED "s/^$symcode$symcode* .* \(.*\)$/ {\"\1\", (void *) \&\1},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext - cat <<\_LT_EOF >> conftest.$ac_ext - {0, (void *) 0} -}; - -/* This works around a problem in FreeBSD linker */ -#ifdef FREEBSD_WORKAROUND -static const void *lt_preloaded_setup() { - return lt__PROGRAM__LTX_preloaded_symbols; -} -#endif - -#ifdef __cplusplus -} -#endif -_LT_EOF - # Now try linking the two files. - mv conftest.$ac_objext conftstm.$ac_objext - lt_globsym_save_LIBS=$LIBS - lt_globsym_save_CFLAGS=$CFLAGS - LIBS=conftstm.$ac_objext - CFLAGS="$CFLAGS$lt_prog_compiler_no_builtin_flag" - if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5 - (eval $ac_link) 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } && test -s conftest$ac_exeext; then - pipe_works=yes - fi - LIBS=$lt_globsym_save_LIBS - CFLAGS=$lt_globsym_save_CFLAGS - else - echo "cannot find nm_test_func in $nlist" >&5 - fi - else - echo "cannot find nm_test_var in $nlist" >&5 - fi - else - echo "cannot run $lt_cv_sys_global_symbol_pipe" >&5 - fi - else - echo "$progname: failed program was:" >&5 - cat conftest.$ac_ext >&5 - fi - rm -rf conftest* conftst* - - # Do not use the global_symbol_pipe unless it works. - if test yes = "$pipe_works"; then - break - else - lt_cv_sys_global_symbol_pipe= - fi -done - -fi - -if test -z "$lt_cv_sys_global_symbol_pipe"; then - lt_cv_sys_global_symbol_to_cdecl= -fi -if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: failed" >&5 -$as_echo "failed" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: ok" >&5 -$as_echo "ok" >&6; } -fi - -# Response file support. -if test "$lt_cv_nm_interface" = "MS dumpbin"; then - nm_file_list_spec='@' -elif $NM --help 2>/dev/null | grep '[@]FILE' >/dev/null; then - nm_file_list_spec='@' -fi - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for sysroot" >&5 -$as_echo_n "checking for sysroot... " >&6; } - -# Check whether --with-sysroot was given. -if test "${with_sysroot+set}" = set; then : - withval=$with_sysroot; -else - with_sysroot=no -fi - - -lt_sysroot= -case $with_sysroot in #( - yes) - if test yes = "$GCC"; then - lt_sysroot=`$CC --print-sysroot 2>/dev/null` - fi - ;; #( - /*) - lt_sysroot=`echo "$with_sysroot" | sed -e "$sed_quote_subst"` - ;; #( - no|'') - ;; #( - *) - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $with_sysroot" >&5 -$as_echo "$with_sysroot" >&6; } - as_fn_error $? "The sysroot must be an absolute path." "$LINENO" 5 - ;; -esac - - { $as_echo "$as_me:${as_lineno-$LINENO}: result: ${lt_sysroot:-no}" >&5 -$as_echo "${lt_sysroot:-no}" >&6; } - - - - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a working dd" >&5 -$as_echo_n "checking for a working dd... " >&6; } -if ${ac_cv_path_lt_DD+:} false; then : - $as_echo_n "(cached) " >&6 -else - printf 0123456789abcdef0123456789abcdef >conftest.i -cat conftest.i conftest.i >conftest2.i -: ${lt_DD:=$DD} -if test -z "$lt_DD"; then - ac_path_lt_DD_found=false - # Loop through the user's path and test for each of PROGNAME-LIST - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_prog in dd; do - for ac_exec_ext in '' $ac_executable_extensions; do - ac_path_lt_DD="$as_dir/$ac_prog$ac_exec_ext" - as_fn_executable_p "$ac_path_lt_DD" || continue -if "$ac_path_lt_DD" bs=32 count=1 conftest.out 2>/dev/null; then - cmp -s conftest.i conftest.out \ - && ac_cv_path_lt_DD="$ac_path_lt_DD" ac_path_lt_DD_found=: -fi - $ac_path_lt_DD_found && break 3 - done - done - done -IFS=$as_save_IFS - if test -z "$ac_cv_path_lt_DD"; then - : - fi -else - ac_cv_path_lt_DD=$lt_DD -fi - -rm -f conftest.i conftest2.i conftest.out -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_lt_DD" >&5 -$as_echo "$ac_cv_path_lt_DD" >&6; } - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to truncate binary pipes" >&5 -$as_echo_n "checking how to truncate binary pipes... " >&6; } -if ${lt_cv_truncate_bin+:} false; then : - $as_echo_n "(cached) " >&6 -else - printf 0123456789abcdef0123456789abcdef >conftest.i -cat conftest.i conftest.i >conftest2.i -lt_cv_truncate_bin= -if "$ac_cv_path_lt_DD" bs=32 count=1 conftest.out 2>/dev/null; then - cmp -s conftest.i conftest.out \ - && lt_cv_truncate_bin="$ac_cv_path_lt_DD bs=4096 count=1" -fi -rm -f conftest.i conftest2.i conftest.out -test -z "$lt_cv_truncate_bin" && lt_cv_truncate_bin="$SED -e 4q" -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_truncate_bin" >&5 -$as_echo "$lt_cv_truncate_bin" >&6; } - - - - - - - -# Calculate cc_basename. Skip known compiler wrappers and cross-prefix. -func_cc_basename () -{ - for cc_temp in $*""; do - case $cc_temp in - compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; - distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; - \-*) ;; - *) break;; - esac - done - func_cc_basename_result=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"` -} - -# Check whether --enable-libtool-lock was given. -if test "${enable_libtool_lock+set}" = set; then : - enableval=$enable_libtool_lock; -fi - -test no = "$enable_libtool_lock" || enable_libtool_lock=yes - -# Some flags need to be propagated to the compiler or linker for good -# libtool support. -case $host in -ia64-*-hpux*) - # Find out what ABI is being produced by ac_compile, and set mode - # options accordingly. - echo 'int i;' > conftest.$ac_ext - if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then - case `/usr/bin/file conftest.$ac_objext` in - *ELF-32*) - HPUX_IA64_MODE=32 - ;; - *ELF-64*) - HPUX_IA64_MODE=64 - ;; - esac - fi - rm -rf conftest* - ;; -*-*-irix6*) - # Find out what ABI is being produced by ac_compile, and set linker - # options accordingly. - echo '#line '$LINENO' "configure"' > conftest.$ac_ext - if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then - if test yes = "$lt_cv_prog_gnu_ld"; then - case `/usr/bin/file conftest.$ac_objext` in - *32-bit*) - LD="${LD-ld} -melf32bsmip" - ;; - *N32*) - LD="${LD-ld} -melf32bmipn32" - ;; - *64-bit*) - LD="${LD-ld} -melf64bmip" - ;; - esac - else - case `/usr/bin/file conftest.$ac_objext` in - *32-bit*) - LD="${LD-ld} -32" - ;; - *N32*) - LD="${LD-ld} -n32" - ;; - *64-bit*) - LD="${LD-ld} -64" - ;; - esac - fi - fi - rm -rf conftest* - ;; - -mips64*-*linux*) - # Find out what ABI is being produced by ac_compile, and set linker - # options accordingly. - echo '#line '$LINENO' "configure"' > conftest.$ac_ext - if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then - emul=elf - case `/usr/bin/file conftest.$ac_objext` in - *32-bit*) - emul="${emul}32" - ;; - *64-bit*) - emul="${emul}64" - ;; - esac - case `/usr/bin/file conftest.$ac_objext` in - *MSB*) - emul="${emul}btsmip" - ;; - *LSB*) - emul="${emul}ltsmip" - ;; - esac - case `/usr/bin/file conftest.$ac_objext` in - *N32*) - emul="${emul}n32" - ;; - esac - LD="${LD-ld} -m $emul" - fi - rm -rf conftest* - ;; - -x86_64-*kfreebsd*-gnu|x86_64-*linux*|powerpc*-*linux*| \ -s390*-*linux*|s390*-*tpf*|sparc*-*linux*) - # Find out what ABI is being produced by ac_compile, and set linker - # options accordingly. Note that the listed cases only cover the - # situations where additional linker options are needed (such as when - # doing 32-bit compilation for a host where ld defaults to 64-bit, or - # vice versa); the common cases where no linker options are needed do - # not appear in the list. - echo 'int i;' > conftest.$ac_ext - if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then - case `/usr/bin/file conftest.o` in - *32-bit*) - case $host in - x86_64-*kfreebsd*-gnu) - LD="${LD-ld} -m elf_i386_fbsd" - ;; - x86_64-*linux*) - case `/usr/bin/file conftest.o` in - *x86-64*) - LD="${LD-ld} -m elf32_x86_64" - ;; - *) - LD="${LD-ld} -m elf_i386" - ;; - esac - ;; - powerpc64le-*linux*) - LD="${LD-ld} -m elf32lppclinux" - ;; - powerpc64-*linux*) - LD="${LD-ld} -m elf32ppclinux" - ;; - s390x-*linux*) - LD="${LD-ld} -m elf_s390" - ;; - sparc64-*linux*) - LD="${LD-ld} -m elf32_sparc" - ;; - esac - ;; - *64-bit*) - case $host in - x86_64-*kfreebsd*-gnu) - LD="${LD-ld} -m elf_x86_64_fbsd" - ;; - x86_64-*linux*) - LD="${LD-ld} -m elf_x86_64" - ;; - powerpcle-*linux*) - LD="${LD-ld} -m elf64lppc" - ;; - powerpc-*linux*) - LD="${LD-ld} -m elf64ppc" - ;; - s390*-*linux*|s390*-*tpf*) - LD="${LD-ld} -m elf64_s390" - ;; - sparc*-*linux*) - LD="${LD-ld} -m elf64_sparc" - ;; - esac - ;; - esac - fi - rm -rf conftest* - ;; - -*-*-sco3.2v5*) - # On SCO OpenServer 5, we need -belf to get full-featured binaries. - SAVE_CFLAGS=$CFLAGS - CFLAGS="$CFLAGS -belf" - { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler needs -belf" >&5 -$as_echo_n "checking whether the C compiler needs -belf... " >&6; } -if ${lt_cv_cc_needs_belf+:} false; then : - $as_echo_n "(cached) " >&6 -else - ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - lt_cv_cc_needs_belf=yes -else - lt_cv_cc_needs_belf=no -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext - ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_cc_needs_belf" >&5 -$as_echo "$lt_cv_cc_needs_belf" >&6; } - if test yes != "$lt_cv_cc_needs_belf"; then - # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf - CFLAGS=$SAVE_CFLAGS - fi - ;; -*-*solaris*) - # Find out what ABI is being produced by ac_compile, and set linker - # options accordingly. - echo 'int i;' > conftest.$ac_ext - if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then - case `/usr/bin/file conftest.o` in - *64-bit*) - case $lt_cv_prog_gnu_ld in - yes*) - case $host in - i?86-*-solaris*|x86_64-*-solaris*) - LD="${LD-ld} -m elf_x86_64" - ;; - sparc*-*-solaris*) - LD="${LD-ld} -m elf64_sparc" - ;; - esac - # GNU ld 2.21 introduced _sol2 emulations. Use them if available. - if ${LD-ld} -V | grep _sol2 >/dev/null 2>&1; then - LD=${LD-ld}_sol2 - fi - ;; - *) - if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then - LD="${LD-ld} -64" - fi - ;; - esac - ;; - esac - fi - rm -rf conftest* - ;; -esac - -need_locks=$enable_libtool_lock - -if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}mt", so it can be a program name with args. -set dummy ${ac_tool_prefix}mt; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_MANIFEST_TOOL+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$MANIFEST_TOOL"; then - ac_cv_prog_MANIFEST_TOOL="$MANIFEST_TOOL" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_MANIFEST_TOOL="${ac_tool_prefix}mt" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -MANIFEST_TOOL=$ac_cv_prog_MANIFEST_TOOL -if test -n "$MANIFEST_TOOL"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MANIFEST_TOOL" >&5 -$as_echo "$MANIFEST_TOOL" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -fi -if test -z "$ac_cv_prog_MANIFEST_TOOL"; then - ac_ct_MANIFEST_TOOL=$MANIFEST_TOOL - # Extract the first word of "mt", so it can be a program name with args. -set dummy mt; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_MANIFEST_TOOL+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_MANIFEST_TOOL"; then - ac_cv_prog_ac_ct_MANIFEST_TOOL="$ac_ct_MANIFEST_TOOL" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_MANIFEST_TOOL="mt" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -ac_ct_MANIFEST_TOOL=$ac_cv_prog_ac_ct_MANIFEST_TOOL -if test -n "$ac_ct_MANIFEST_TOOL"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_MANIFEST_TOOL" >&5 -$as_echo "$ac_ct_MANIFEST_TOOL" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - if test "x$ac_ct_MANIFEST_TOOL" = x; then - MANIFEST_TOOL=":" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - MANIFEST_TOOL=$ac_ct_MANIFEST_TOOL - fi -else - MANIFEST_TOOL="$ac_cv_prog_MANIFEST_TOOL" -fi - -test -z "$MANIFEST_TOOL" && MANIFEST_TOOL=mt -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $MANIFEST_TOOL is a manifest tool" >&5 -$as_echo_n "checking if $MANIFEST_TOOL is a manifest tool... " >&6; } -if ${lt_cv_path_mainfest_tool+:} false; then : - $as_echo_n "(cached) " >&6 -else - lt_cv_path_mainfest_tool=no - echo "$as_me:$LINENO: $MANIFEST_TOOL '-?'" >&5 - $MANIFEST_TOOL '-?' 2>conftest.err > conftest.out - cat conftest.err >&5 - if $GREP 'Manifest Tool' conftest.out > /dev/null; then - lt_cv_path_mainfest_tool=yes - fi - rm -f conftest* -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_mainfest_tool" >&5 -$as_echo "$lt_cv_path_mainfest_tool" >&6; } -if test yes != "$lt_cv_path_mainfest_tool"; then - MANIFEST_TOOL=: -fi - - - - - - - case $host_os in - rhapsody* | darwin*) - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}dsymutil", so it can be a program name with args. -set dummy ${ac_tool_prefix}dsymutil; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_DSYMUTIL+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$DSYMUTIL"; then - ac_cv_prog_DSYMUTIL="$DSYMUTIL" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_DSYMUTIL="${ac_tool_prefix}dsymutil" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -DSYMUTIL=$ac_cv_prog_DSYMUTIL -if test -n "$DSYMUTIL"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DSYMUTIL" >&5 -$as_echo "$DSYMUTIL" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -fi -if test -z "$ac_cv_prog_DSYMUTIL"; then - ac_ct_DSYMUTIL=$DSYMUTIL - # Extract the first word of "dsymutil", so it can be a program name with args. -set dummy dsymutil; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_DSYMUTIL+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_DSYMUTIL"; then - ac_cv_prog_ac_ct_DSYMUTIL="$ac_ct_DSYMUTIL" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_DSYMUTIL="dsymutil" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -ac_ct_DSYMUTIL=$ac_cv_prog_ac_ct_DSYMUTIL -if test -n "$ac_ct_DSYMUTIL"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DSYMUTIL" >&5 -$as_echo "$ac_ct_DSYMUTIL" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - if test "x$ac_ct_DSYMUTIL" = x; then - DSYMUTIL=":" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - DSYMUTIL=$ac_ct_DSYMUTIL - fi -else - DSYMUTIL="$ac_cv_prog_DSYMUTIL" -fi - - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}nmedit", so it can be a program name with args. -set dummy ${ac_tool_prefix}nmedit; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_NMEDIT+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$NMEDIT"; then - ac_cv_prog_NMEDIT="$NMEDIT" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_NMEDIT="${ac_tool_prefix}nmedit" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -NMEDIT=$ac_cv_prog_NMEDIT -if test -n "$NMEDIT"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $NMEDIT" >&5 -$as_echo "$NMEDIT" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -fi -if test -z "$ac_cv_prog_NMEDIT"; then - ac_ct_NMEDIT=$NMEDIT - # Extract the first word of "nmedit", so it can be a program name with args. -set dummy nmedit; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_NMEDIT+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_NMEDIT"; then - ac_cv_prog_ac_ct_NMEDIT="$ac_ct_NMEDIT" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_NMEDIT="nmedit" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -ac_ct_NMEDIT=$ac_cv_prog_ac_ct_NMEDIT -if test -n "$ac_ct_NMEDIT"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_NMEDIT" >&5 -$as_echo "$ac_ct_NMEDIT" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - if test "x$ac_ct_NMEDIT" = x; then - NMEDIT=":" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - NMEDIT=$ac_ct_NMEDIT - fi -else - NMEDIT="$ac_cv_prog_NMEDIT" -fi - - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}lipo", so it can be a program name with args. -set dummy ${ac_tool_prefix}lipo; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_LIPO+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$LIPO"; then - ac_cv_prog_LIPO="$LIPO" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_LIPO="${ac_tool_prefix}lipo" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -LIPO=$ac_cv_prog_LIPO -if test -n "$LIPO"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LIPO" >&5 -$as_echo "$LIPO" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -fi -if test -z "$ac_cv_prog_LIPO"; then - ac_ct_LIPO=$LIPO - # Extract the first word of "lipo", so it can be a program name with args. -set dummy lipo; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_LIPO+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_LIPO"; then - ac_cv_prog_ac_ct_LIPO="$ac_ct_LIPO" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_LIPO="lipo" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -ac_ct_LIPO=$ac_cv_prog_ac_ct_LIPO -if test -n "$ac_ct_LIPO"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_LIPO" >&5 -$as_echo "$ac_ct_LIPO" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - if test "x$ac_ct_LIPO" = x; then - LIPO=":" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - LIPO=$ac_ct_LIPO - fi -else - LIPO="$ac_cv_prog_LIPO" -fi - - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}otool", so it can be a program name with args. -set dummy ${ac_tool_prefix}otool; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_OTOOL+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$OTOOL"; then - ac_cv_prog_OTOOL="$OTOOL" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_OTOOL="${ac_tool_prefix}otool" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -OTOOL=$ac_cv_prog_OTOOL -if test -n "$OTOOL"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OTOOL" >&5 -$as_echo "$OTOOL" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -fi -if test -z "$ac_cv_prog_OTOOL"; then - ac_ct_OTOOL=$OTOOL - # Extract the first word of "otool", so it can be a program name with args. -set dummy otool; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_OTOOL+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_OTOOL"; then - ac_cv_prog_ac_ct_OTOOL="$ac_ct_OTOOL" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_OTOOL="otool" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -ac_ct_OTOOL=$ac_cv_prog_ac_ct_OTOOL -if test -n "$ac_ct_OTOOL"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OTOOL" >&5 -$as_echo "$ac_ct_OTOOL" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - if test "x$ac_ct_OTOOL" = x; then - OTOOL=":" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - OTOOL=$ac_ct_OTOOL - fi -else - OTOOL="$ac_cv_prog_OTOOL" -fi - - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}otool64", so it can be a program name with args. -set dummy ${ac_tool_prefix}otool64; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_OTOOL64+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$OTOOL64"; then - ac_cv_prog_OTOOL64="$OTOOL64" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_OTOOL64="${ac_tool_prefix}otool64" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -OTOOL64=$ac_cv_prog_OTOOL64 -if test -n "$OTOOL64"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OTOOL64" >&5 -$as_echo "$OTOOL64" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -fi -if test -z "$ac_cv_prog_OTOOL64"; then - ac_ct_OTOOL64=$OTOOL64 - # Extract the first word of "otool64", so it can be a program name with args. -set dummy otool64; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_OTOOL64+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_OTOOL64"; then - ac_cv_prog_ac_ct_OTOOL64="$ac_ct_OTOOL64" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_OTOOL64="otool64" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -ac_ct_OTOOL64=$ac_cv_prog_ac_ct_OTOOL64 -if test -n "$ac_ct_OTOOL64"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OTOOL64" >&5 -$as_echo "$ac_ct_OTOOL64" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - if test "x$ac_ct_OTOOL64" = x; then - OTOOL64=":" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - OTOOL64=$ac_ct_OTOOL64 - fi -else - OTOOL64="$ac_cv_prog_OTOOL64" -fi - - - - - - - - - - - - - - - - - - - - - - - - - - - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -single_module linker flag" >&5 -$as_echo_n "checking for -single_module linker flag... " >&6; } -if ${lt_cv_apple_cc_single_mod+:} false; then : - $as_echo_n "(cached) " >&6 -else - lt_cv_apple_cc_single_mod=no - if test -z "$LT_MULTI_MODULE"; then - # By default we will add the -single_module flag. You can override - # by either setting the environment variable LT_MULTI_MODULE - # non-empty at configure time, or by adding -multi_module to the - # link flags. - rm -rf libconftest.dylib* - echo "int foo(void){return 1;}" > conftest.c - echo "$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \ --dynamiclib -Wl,-single_module conftest.c" >&5 - $LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \ - -dynamiclib -Wl,-single_module conftest.c 2>conftest.err - _lt_result=$? - # If there is a non-empty error log, and "single_module" - # appears in it, assume the flag caused a linker warning - if test -s conftest.err && $GREP single_module conftest.err; then - cat conftest.err >&5 - # Otherwise, if the output was created with a 0 exit code from - # the compiler, it worked. - elif test -f libconftest.dylib && test 0 = "$_lt_result"; then - lt_cv_apple_cc_single_mod=yes - else - cat conftest.err >&5 - fi - rm -rf libconftest.dylib* - rm -f conftest.* - fi -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_apple_cc_single_mod" >&5 -$as_echo "$lt_cv_apple_cc_single_mod" >&6; } - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -exported_symbols_list linker flag" >&5 -$as_echo_n "checking for -exported_symbols_list linker flag... " >&6; } -if ${lt_cv_ld_exported_symbols_list+:} false; then : - $as_echo_n "(cached) " >&6 -else - lt_cv_ld_exported_symbols_list=no - save_LDFLAGS=$LDFLAGS - echo "_main" > conftest.sym - LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - lt_cv_ld_exported_symbols_list=yes -else - lt_cv_ld_exported_symbols_list=no -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext - LDFLAGS=$save_LDFLAGS - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_exported_symbols_list" >&5 -$as_echo "$lt_cv_ld_exported_symbols_list" >&6; } - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -force_load linker flag" >&5 -$as_echo_n "checking for -force_load linker flag... " >&6; } -if ${lt_cv_ld_force_load+:} false; then : - $as_echo_n "(cached) " >&6 -else - lt_cv_ld_force_load=no - cat > conftest.c << _LT_EOF -int forced_loaded() { return 2;} -_LT_EOF - echo "$LTCC $LTCFLAGS -c -o conftest.o conftest.c" >&5 - $LTCC $LTCFLAGS -c -o conftest.o conftest.c 2>&5 - echo "$AR cru libconftest.a conftest.o" >&5 - $AR cru libconftest.a conftest.o 2>&5 - echo "$RANLIB libconftest.a" >&5 - $RANLIB libconftest.a 2>&5 - cat > conftest.c << _LT_EOF -int main() { return 0;} -_LT_EOF - echo "$LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a" >&5 - $LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a 2>conftest.err - _lt_result=$? - if test -s conftest.err && $GREP force_load conftest.err; then - cat conftest.err >&5 - elif test -f conftest && test 0 = "$_lt_result" && $GREP forced_load conftest >/dev/null 2>&1; then - lt_cv_ld_force_load=yes - else - cat conftest.err >&5 - fi - rm -f conftest.err libconftest.a conftest conftest.c - rm -rf conftest.dSYM - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_force_load" >&5 -$as_echo "$lt_cv_ld_force_load" >&6; } - case $host_os in - rhapsody* | darwin1.[012]) - _lt_dar_allow_undefined='$wl-undefined ${wl}suppress' ;; - darwin1.*) - _lt_dar_allow_undefined='$wl-flat_namespace $wl-undefined ${wl}suppress' ;; - darwin*) # darwin 5.x on - # if running on 10.5 or later, the deployment target defaults - # to the OS version, if on x86, and 10.4, the deployment - # target defaults to 10.4. Don't you love it? - case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in - 10.0,*86*-darwin8*|10.0,*-darwin[91]*) - _lt_dar_allow_undefined='$wl-undefined ${wl}dynamic_lookup' ;; - 10.[012][,.]*) - _lt_dar_allow_undefined='$wl-flat_namespace $wl-undefined ${wl}suppress' ;; - 10.*) - _lt_dar_allow_undefined='$wl-undefined ${wl}dynamic_lookup' ;; - esac - ;; - esac - if test yes = "$lt_cv_apple_cc_single_mod"; then - _lt_dar_single_mod='$single_module' - fi - if test yes = "$lt_cv_ld_exported_symbols_list"; then - _lt_dar_export_syms=' $wl-exported_symbols_list,$output_objdir/$libname-symbols.expsym' - else - _lt_dar_export_syms='~$NMEDIT -s $output_objdir/$libname-symbols.expsym $lib' - fi - if test : != "$DSYMUTIL" && test no = "$lt_cv_ld_force_load"; then - _lt_dsymutil='~$DSYMUTIL $lib || :' - else - _lt_dsymutil= - fi - ;; - esac - -# func_munge_path_list VARIABLE PATH -# ----------------------------------- -# VARIABLE is name of variable containing _space_ separated list of -# directories to be munged by the contents of PATH, which is string -# having a format: -# "DIR[:DIR]:" -# string "DIR[ DIR]" will be prepended to VARIABLE -# ":DIR[:DIR]" -# string "DIR[ DIR]" will be appended to VARIABLE -# "DIRP[:DIRP]::[DIRA:]DIRA" -# string "DIRP[ DIRP]" will be prepended to VARIABLE and string -# "DIRA[ DIRA]" will be appended to VARIABLE -# "DIR[:DIR]" -# VARIABLE will be replaced by "DIR[ DIR]" -func_munge_path_list () -{ - case x$2 in - x) - ;; - *:) - eval $1=\"`$ECHO $2 | $SED 's/:/ /g'` \$$1\" - ;; - x:*) - eval $1=\"\$$1 `$ECHO $2 | $SED 's/:/ /g'`\" - ;; - *::*) - eval $1=\"\$$1\ `$ECHO $2 | $SED -e 's/.*:://' -e 's/:/ /g'`\" - eval $1=\"`$ECHO $2 | $SED -e 's/::.*//' -e 's/:/ /g'`\ \$$1\" - ;; - *) - eval $1=\"`$ECHO $2 | $SED 's/:/ /g'`\" - ;; - esac -} - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for ANSI C header files" >&5 -$as_echo_n "checking for ANSI C header files... " >&6; } -if ${ac_cv_header_stdc+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include -#include -#include -#include - -int -main () -{ - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - ac_cv_header_stdc=yes -else - ac_cv_header_stdc=no -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - -if test $ac_cv_header_stdc = yes; then - # SunOS 4.x string.h does not declare mem*, contrary to ANSI. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include - -_ACEOF -if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - $EGREP "memchr" >/dev/null 2>&1; then : - -else - ac_cv_header_stdc=no -fi -rm -f conftest* - -fi - -if test $ac_cv_header_stdc = yes; then - # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include - -_ACEOF -if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - $EGREP "free" >/dev/null 2>&1; then : - -else - ac_cv_header_stdc=no -fi -rm -f conftest* - -fi - -if test $ac_cv_header_stdc = yes; then - # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi. - if test "$cross_compiling" = yes; then : - : -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include -#include -#if ((' ' & 0x0FF) == 0x020) -# define ISLOWER(c) ('a' <= (c) && (c) <= 'z') -# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) -#else -# define ISLOWER(c) \ - (('a' <= (c) && (c) <= 'i') \ - || ('j' <= (c) && (c) <= 'r') \ - || ('s' <= (c) && (c) <= 'z')) -# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c)) -#endif - -#define XOR(e, f) (((e) && !(f)) || (!(e) && (f))) -int -main () -{ - int i; - for (i = 0; i < 256; i++) - if (XOR (islower (i), ISLOWER (i)) - || toupper (i) != TOUPPER (i)) - return 2; - return 0; -} -_ACEOF -if ac_fn_c_try_run "$LINENO"; then : - -else - ac_cv_header_stdc=no -fi -rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ - conftest.$ac_objext conftest.beam conftest.$ac_ext -fi - -fi -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_stdc" >&5 -$as_echo "$ac_cv_header_stdc" >&6; } -if test $ac_cv_header_stdc = yes; then - -$as_echo "#define STDC_HEADERS 1" >>confdefs.h - -fi - -# On IRIX 5.3, sys/types and inttypes.h are conflicting. -for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \ - inttypes.h stdint.h unistd.h -do : - as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` -ac_fn_c_check_header_compile "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default -" -if eval test \"x\$"$as_ac_Header"\" = x"yes"; then : - cat >>confdefs.h <<_ACEOF -#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 -_ACEOF - -fi - -done - - -for ac_header in dlfcn.h -do : - ac_fn_c_check_header_compile "$LINENO" "dlfcn.h" "ac_cv_header_dlfcn_h" "$ac_includes_default -" -if test "x$ac_cv_header_dlfcn_h" = xyes; then : - cat >>confdefs.h <<_ACEOF -#define HAVE_DLFCN_H 1 -_ACEOF - -fi - -done - - - - - -# Set options -enable_win32_dll=yes - -case $host in -*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-cegcc*) - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args. -set dummy ${ac_tool_prefix}as; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_AS+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$AS"; then - ac_cv_prog_AS="$AS" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_AS="${ac_tool_prefix}as" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -AS=$ac_cv_prog_AS -if test -n "$AS"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AS" >&5 -$as_echo "$AS" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -fi -if test -z "$ac_cv_prog_AS"; then - ac_ct_AS=$AS - # Extract the first word of "as", so it can be a program name with args. -set dummy as; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_AS+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_AS"; then - ac_cv_prog_ac_ct_AS="$ac_ct_AS" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_AS="as" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -ac_ct_AS=$ac_cv_prog_ac_ct_AS -if test -n "$ac_ct_AS"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_AS" >&5 -$as_echo "$ac_ct_AS" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - if test "x$ac_ct_AS" = x; then - AS="false" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - AS=$ac_ct_AS - fi -else - AS="$ac_cv_prog_AS" -fi - - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}dlltool", so it can be a program name with args. -set dummy ${ac_tool_prefix}dlltool; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_DLLTOOL+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$DLLTOOL"; then - ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_DLLTOOL="${ac_tool_prefix}dlltool" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -DLLTOOL=$ac_cv_prog_DLLTOOL -if test -n "$DLLTOOL"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DLLTOOL" >&5 -$as_echo "$DLLTOOL" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -fi -if test -z "$ac_cv_prog_DLLTOOL"; then - ac_ct_DLLTOOL=$DLLTOOL - # Extract the first word of "dlltool", so it can be a program name with args. -set dummy dlltool; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_DLLTOOL+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_DLLTOOL"; then - ac_cv_prog_ac_ct_DLLTOOL="$ac_ct_DLLTOOL" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_DLLTOOL="dlltool" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -ac_ct_DLLTOOL=$ac_cv_prog_ac_ct_DLLTOOL -if test -n "$ac_ct_DLLTOOL"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DLLTOOL" >&5 -$as_echo "$ac_ct_DLLTOOL" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - if test "x$ac_ct_DLLTOOL" = x; then - DLLTOOL="false" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - DLLTOOL=$ac_ct_DLLTOOL - fi -else - DLLTOOL="$ac_cv_prog_DLLTOOL" -fi - - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}objdump", so it can be a program name with args. -set dummy ${ac_tool_prefix}objdump; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_OBJDUMP+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$OBJDUMP"; then - ac_cv_prog_OBJDUMP="$OBJDUMP" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_OBJDUMP="${ac_tool_prefix}objdump" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -OBJDUMP=$ac_cv_prog_OBJDUMP -if test -n "$OBJDUMP"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OBJDUMP" >&5 -$as_echo "$OBJDUMP" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -fi -if test -z "$ac_cv_prog_OBJDUMP"; then - ac_ct_OBJDUMP=$OBJDUMP - # Extract the first word of "objdump", so it can be a program name with args. -set dummy objdump; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_OBJDUMP+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_OBJDUMP"; then - ac_cv_prog_ac_ct_OBJDUMP="$ac_ct_OBJDUMP" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_OBJDUMP="objdump" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -ac_ct_OBJDUMP=$ac_cv_prog_ac_ct_OBJDUMP -if test -n "$ac_ct_OBJDUMP"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OBJDUMP" >&5 -$as_echo "$ac_ct_OBJDUMP" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - if test "x$ac_ct_OBJDUMP" = x; then - OBJDUMP="false" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - OBJDUMP=$ac_ct_OBJDUMP - fi -else - OBJDUMP="$ac_cv_prog_OBJDUMP" -fi - - ;; -esac - -test -z "$AS" && AS=as - - - - - -test -z "$DLLTOOL" && DLLTOOL=dlltool - - - - - -test -z "$OBJDUMP" && OBJDUMP=objdump - - - - - - - - enable_dlopen=no - - - - # Check whether --enable-shared was given. -if test "${enable_shared+set}" = set; then : - enableval=$enable_shared; p=${PACKAGE-default} - case $enableval in - yes) enable_shared=yes ;; - no) enable_shared=no ;; - *) - enable_shared=no - # Look at the argument we got. We use all the common list separators. - lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR, - for pkg in $enableval; do - IFS=$lt_save_ifs - if test "X$pkg" = "X$p"; then - enable_shared=yes - fi - done - IFS=$lt_save_ifs - ;; - esac -else - enable_shared=yes -fi - - - - - - - - - - # Check whether --enable-static was given. -if test "${enable_static+set}" = set; then : - enableval=$enable_static; p=${PACKAGE-default} - case $enableval in - yes) enable_static=yes ;; - no) enable_static=no ;; - *) - enable_static=no - # Look at the argument we got. We use all the common list separators. - lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR, - for pkg in $enableval; do - IFS=$lt_save_ifs - if test "X$pkg" = "X$p"; then - enable_static=yes - fi - done - IFS=$lt_save_ifs - ;; - esac -else - enable_static=yes -fi - - - - - - - - - - -# Check whether --with-pic was given. -if test "${with_pic+set}" = set; then : - withval=$with_pic; lt_p=${PACKAGE-default} - case $withval in - yes|no) pic_mode=$withval ;; - *) - pic_mode=default - # Look at the argument we got. We use all the common list separators. - lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR, - for lt_pkg in $withval; do - IFS=$lt_save_ifs - if test "X$lt_pkg" = "X$lt_p"; then - pic_mode=yes - fi - done - IFS=$lt_save_ifs - ;; - esac -else - pic_mode=default -fi - - - - - - - - - # Check whether --enable-fast-install was given. -if test "${enable_fast_install+set}" = set; then : - enableval=$enable_fast_install; p=${PACKAGE-default} - case $enableval in - yes) enable_fast_install=yes ;; - no) enable_fast_install=no ;; - *) - enable_fast_install=no - # Look at the argument we got. We use all the common list separators. - lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR, - for pkg in $enableval; do - IFS=$lt_save_ifs - if test "X$pkg" = "X$p"; then - enable_fast_install=yes - fi - done - IFS=$lt_save_ifs - ;; - esac -else - enable_fast_install=yes -fi - - - - - - - - - shared_archive_member_spec= -case $host,$enable_shared in -power*-*-aix[5-9]*,yes) - { $as_echo "$as_me:${as_lineno-$LINENO}: checking which variant of shared library versioning to provide" >&5 -$as_echo_n "checking which variant of shared library versioning to provide... " >&6; } - -# Check whether --with-aix-soname was given. -if test "${with_aix_soname+set}" = set; then : - withval=$with_aix_soname; case $withval in - aix|svr4|both) - ;; - *) - as_fn_error $? "Unknown argument to --with-aix-soname" "$LINENO" 5 - ;; - esac - lt_cv_with_aix_soname=$with_aix_soname -else - if ${lt_cv_with_aix_soname+:} false; then : - $as_echo_n "(cached) " >&6 -else - lt_cv_with_aix_soname=aix -fi - - with_aix_soname=$lt_cv_with_aix_soname -fi - - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $with_aix_soname" >&5 -$as_echo "$with_aix_soname" >&6; } - if test aix != "$with_aix_soname"; then - # For the AIX way of multilib, we name the shared archive member - # based on the bitwidth used, traditionally 'shr.o' or 'shr_64.o', - # and 'shr.imp' or 'shr_64.imp', respectively, for the Import File. - # Even when GNU compilers ignore OBJECT_MODE but need '-maix64' flag, - # the AIX toolchain works better with OBJECT_MODE set (default 32). - if test 64 = "${OBJECT_MODE-32}"; then - shared_archive_member_spec=shr_64 - else - shared_archive_member_spec=shr - fi - fi - ;; -*) - with_aix_soname=aix - ;; -esac - - - - - - - - - - -# This can be used to rebuild libtool when needed -LIBTOOL_DEPS=$ltmain - -# Always use our own libtool. -LIBTOOL='$(SHELL) $(top_builddir)/libtool' - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -test -z "$LN_S" && LN_S="ln -s" - - - - - - - - - - - - - - -if test -n "${ZSH_VERSION+set}"; then - setopt NO_GLOB_SUBST -fi - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for objdir" >&5 -$as_echo_n "checking for objdir... " >&6; } -if ${lt_cv_objdir+:} false; then : - $as_echo_n "(cached) " >&6 -else - rm -f .libs 2>/dev/null -mkdir .libs 2>/dev/null -if test -d .libs; then - lt_cv_objdir=.libs -else - # MS-DOS does not allow filenames that begin with a dot. - lt_cv_objdir=_libs -fi -rmdir .libs 2>/dev/null -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_objdir" >&5 -$as_echo "$lt_cv_objdir" >&6; } -objdir=$lt_cv_objdir - - - - - -cat >>confdefs.h <<_ACEOF -#define LT_OBJDIR "$lt_cv_objdir/" -_ACEOF - - - - -case $host_os in -aix3*) - # AIX sometimes has problems with the GCC collect2 program. For some - # reason, if we set the COLLECT_NAMES environment variable, the problems - # vanish in a puff of smoke. - if test set != "${COLLECT_NAMES+set}"; then - COLLECT_NAMES= - export COLLECT_NAMES - fi - ;; -esac - -# Global variables: -ofile=libtool -can_build_shared=yes - -# All known linkers require a '.a' archive for static linking (except MSVC, -# which needs '.lib'). -libext=a - -with_gnu_ld=$lt_cv_prog_gnu_ld - -old_CC=$CC -old_CFLAGS=$CFLAGS - -# Set sane defaults for various variables -test -z "$CC" && CC=cc -test -z "$LTCC" && LTCC=$CC -test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS -test -z "$LD" && LD=ld -test -z "$ac_objext" && ac_objext=o - -func_cc_basename $compiler -cc_basename=$func_cc_basename_result - - -# Only perform the check for file, if the check method requires it -test -z "$MAGIC_CMD" && MAGIC_CMD=file -case $deplibs_check_method in -file_magic*) - if test "$file_magic_cmd" = '$MAGIC_CMD'; then - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ${ac_tool_prefix}file" >&5 -$as_echo_n "checking for ${ac_tool_prefix}file... " >&6; } -if ${lt_cv_path_MAGIC_CMD+:} false; then : - $as_echo_n "(cached) " >&6 -else - case $MAGIC_CMD in -[\\/*] | ?:[\\/]*) - lt_cv_path_MAGIC_CMD=$MAGIC_CMD # Let the user override the test with a path. - ;; -*) - lt_save_MAGIC_CMD=$MAGIC_CMD - lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR - ac_dummy="/usr/bin$PATH_SEPARATOR$PATH" - for ac_dir in $ac_dummy; do - IFS=$lt_save_ifs - test -z "$ac_dir" && ac_dir=. - if test -f "$ac_dir/${ac_tool_prefix}file"; then - lt_cv_path_MAGIC_CMD=$ac_dir/"${ac_tool_prefix}file" - if test -n "$file_magic_test_file"; then - case $deplibs_check_method in - "file_magic "*) - file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"` - MAGIC_CMD=$lt_cv_path_MAGIC_CMD - if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | - $EGREP "$file_magic_regex" > /dev/null; then - : - else - cat <<_LT_EOF 1>&2 - -*** Warning: the command libtool uses to detect shared libraries, -*** $file_magic_cmd, produces output that libtool cannot recognize. -*** The result is that libtool may fail to recognize shared libraries -*** as such. This will affect the creation of libtool libraries that -*** depend on shared libraries, but programs linked with such libtool -*** libraries will work regardless of this problem. Nevertheless, you -*** may want to report the problem to your system manager and/or to -*** bug-libtool@gnu.org - -_LT_EOF - fi ;; - esac - fi - break - fi - done - IFS=$lt_save_ifs - MAGIC_CMD=$lt_save_MAGIC_CMD - ;; -esac -fi - -MAGIC_CMD=$lt_cv_path_MAGIC_CMD -if test -n "$MAGIC_CMD"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MAGIC_CMD" >&5 -$as_echo "$MAGIC_CMD" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - - - -if test -z "$lt_cv_path_MAGIC_CMD"; then - if test -n "$ac_tool_prefix"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for file" >&5 -$as_echo_n "checking for file... " >&6; } -if ${lt_cv_path_MAGIC_CMD+:} false; then : - $as_echo_n "(cached) " >&6 -else - case $MAGIC_CMD in -[\\/*] | ?:[\\/]*) - lt_cv_path_MAGIC_CMD=$MAGIC_CMD # Let the user override the test with a path. - ;; -*) - lt_save_MAGIC_CMD=$MAGIC_CMD - lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR - ac_dummy="/usr/bin$PATH_SEPARATOR$PATH" - for ac_dir in $ac_dummy; do - IFS=$lt_save_ifs - test -z "$ac_dir" && ac_dir=. - if test -f "$ac_dir/file"; then - lt_cv_path_MAGIC_CMD=$ac_dir/"file" - if test -n "$file_magic_test_file"; then - case $deplibs_check_method in - "file_magic "*) - file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"` - MAGIC_CMD=$lt_cv_path_MAGIC_CMD - if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | - $EGREP "$file_magic_regex" > /dev/null; then - : - else - cat <<_LT_EOF 1>&2 - -*** Warning: the command libtool uses to detect shared libraries, -*** $file_magic_cmd, produces output that libtool cannot recognize. -*** The result is that libtool may fail to recognize shared libraries -*** as such. This will affect the creation of libtool libraries that -*** depend on shared libraries, but programs linked with such libtool -*** libraries will work regardless of this problem. Nevertheless, you -*** may want to report the problem to your system manager and/or to -*** bug-libtool@gnu.org - -_LT_EOF - fi ;; - esac - fi - break - fi - done - IFS=$lt_save_ifs - MAGIC_CMD=$lt_save_MAGIC_CMD - ;; -esac -fi - -MAGIC_CMD=$lt_cv_path_MAGIC_CMD -if test -n "$MAGIC_CMD"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MAGIC_CMD" >&5 -$as_echo "$MAGIC_CMD" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - else - MAGIC_CMD=: - fi -fi - - fi - ;; -esac - -# Use C for the default configuration in the libtool script - -lt_save_CC=$CC -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - - -# Source file extension for C test sources. -ac_ext=c - -# Object file extension for compiled C test sources. -objext=o -objext=$objext - -# Code to be used in simple compile tests -lt_simple_compile_test_code="int some_variable = 0;" - -# Code to be used in simple link tests -lt_simple_link_test_code='int main(){return(0);}' - - - - - - - -# If no C compiler was specified, use CC. -LTCC=${LTCC-"$CC"} - -# If no C compiler flags were specified, use CFLAGS. -LTCFLAGS=${LTCFLAGS-"$CFLAGS"} - -# Allow CC to be a program name with arguments. -compiler=$CC - -# Save the default compiler, since it gets overwritten when the other -# tags are being tested, and _LT_TAGVAR(compiler, []) is a NOP. -compiler_DEFAULT=$CC - -# save warnings/boilerplate of simple test code -ac_outfile=conftest.$ac_objext -echo "$lt_simple_compile_test_code" >conftest.$ac_ext -eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err -_lt_compiler_boilerplate=`cat conftest.err` -$RM conftest* - -ac_outfile=conftest.$ac_objext -echo "$lt_simple_link_test_code" >conftest.$ac_ext -eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err -_lt_linker_boilerplate=`cat conftest.err` -$RM -r conftest* - - -## CAVEAT EMPTOR: -## There is no encapsulation within the following macros, do not change -## the running order or otherwise move them around unless you know exactly -## what you are doing... -if test -n "$compiler"; then - -lt_prog_compiler_no_builtin_flag= - -if test yes = "$GCC"; then - case $cc_basename in - nvcc*) - lt_prog_compiler_no_builtin_flag=' -Xcompiler -fno-builtin' ;; - *) - lt_prog_compiler_no_builtin_flag=' -fno-builtin' ;; - esac - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -fno-rtti -fno-exceptions" >&5 -$as_echo_n "checking if $compiler supports -fno-rtti -fno-exceptions... " >&6; } -if ${lt_cv_prog_compiler_rtti_exceptions+:} false; then : - $as_echo_n "(cached) " >&6 -else - lt_cv_prog_compiler_rtti_exceptions=no - ac_outfile=conftest.$ac_objext - echo "$lt_simple_compile_test_code" > conftest.$ac_ext - lt_compiler_flag="-fno-rtti -fno-exceptions" ## exclude from sc_useless_quotes_in_assignment - # Insert the option either (1) after the last *FLAGS variable, or - # (2) before a word containing "conftest.", or (3) at the end. - # Note that $ac_compile itself does not contain backslashes and begins - # with a dollar sign (not a hyphen), so the echo should work correctly. - # The option is referenced via a variable to avoid confusing sed. - lt_compile=`echo "$ac_compile" | $SED \ - -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ - -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ - -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5) - (eval "$lt_compile" 2>conftest.err) - ac_status=$? - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - if (exit $ac_status) && test -s "$ac_outfile"; then - # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings other than the usual output. - $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp - $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 - if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then - lt_cv_prog_compiler_rtti_exceptions=yes - fi - fi - $RM conftest* - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_rtti_exceptions" >&5 -$as_echo "$lt_cv_prog_compiler_rtti_exceptions" >&6; } - -if test yes = "$lt_cv_prog_compiler_rtti_exceptions"; then - lt_prog_compiler_no_builtin_flag="$lt_prog_compiler_no_builtin_flag -fno-rtti -fno-exceptions" -else - : -fi - -fi - - - - - - - lt_prog_compiler_wl= -lt_prog_compiler_pic= -lt_prog_compiler_static= - - - if test yes = "$GCC"; then - lt_prog_compiler_wl='-Wl,' - lt_prog_compiler_static='-static' - - case $host_os in - aix*) - # All AIX code is PIC. - if test ia64 = "$host_cpu"; then - # AIX 5 now supports IA64 processor - lt_prog_compiler_static='-Bstatic' - fi - lt_prog_compiler_pic='-fPIC' - ;; - - amigaos*) - case $host_cpu in - powerpc) - # see comment about AmigaOS4 .so support - lt_prog_compiler_pic='-fPIC' - ;; - m68k) - # FIXME: we need at least 68020 code to build shared libraries, but - # adding the '-m68020' flag to GCC prevents building anything better, - # like '-m68040'. - lt_prog_compiler_pic='-m68020 -resident32 -malways-restore-a4' - ;; - esac - ;; - - beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) - # PIC is the default for these OSes. - ;; - - mingw* | cygwin* | pw32* | os2* | cegcc*) - # This hack is so that the source file can tell whether it is being - # built for inclusion in a dll (and should export symbols for example). - # Although the cygwin gcc ignores -fPIC, still need this for old-style - # (--disable-auto-import) libraries - lt_prog_compiler_pic='-DDLL_EXPORT' - case $host_os in - os2*) - lt_prog_compiler_static='$wl-static' - ;; - esac - ;; - - darwin* | rhapsody*) - # PIC is the default on this platform - # Common symbols not allowed in MH_DYLIB files - lt_prog_compiler_pic='-fno-common' - ;; - - haiku*) - # PIC is the default for Haiku. - # The "-static" flag exists, but is broken. - lt_prog_compiler_static= - ;; - - hpux*) - # PIC is the default for 64-bit PA HP-UX, but not for 32-bit - # PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag - # sets the default TLS model and affects inlining. - case $host_cpu in - hppa*64*) - # +Z the default - ;; - *) - lt_prog_compiler_pic='-fPIC' - ;; - esac - ;; - - interix[3-9]*) - # Interix 3.x gcc -fpic/-fPIC options generate broken code. - # Instead, we relocate shared libraries at runtime. - ;; - - msdosdjgpp*) - # Just because we use GCC doesn't mean we suddenly get shared libraries - # on systems that don't support them. - lt_prog_compiler_can_build_shared=no - enable_shared=no - ;; - - *nto* | *qnx*) - # QNX uses GNU C++, but need to define -shared option too, otherwise - # it will coredump. - lt_prog_compiler_pic='-fPIC -shared' - ;; - - sysv4*MP*) - if test -d /usr/nec; then - lt_prog_compiler_pic=-Kconform_pic - fi - ;; - - *) - lt_prog_compiler_pic='-fPIC' - ;; - esac - - case $cc_basename in - nvcc*) # Cuda Compiler Driver 2.2 - lt_prog_compiler_wl='-Xlinker ' - if test -n "$lt_prog_compiler_pic"; then - lt_prog_compiler_pic="-Xcompiler $lt_prog_compiler_pic" - fi - ;; - esac - else - # PORTME Check for flag to pass linker flags through the system compiler. - case $host_os in - aix*) - lt_prog_compiler_wl='-Wl,' - if test ia64 = "$host_cpu"; then - # AIX 5 now supports IA64 processor - lt_prog_compiler_static='-Bstatic' - else - lt_prog_compiler_static='-bnso -bI:/lib/syscalls.exp' - fi - ;; - - darwin* | rhapsody*) - # PIC is the default on this platform - # Common symbols not allowed in MH_DYLIB files - lt_prog_compiler_pic='-fno-common' - case $cc_basename in - nagfor*) - # NAG Fortran compiler - lt_prog_compiler_wl='-Wl,-Wl,,' - lt_prog_compiler_pic='-PIC' - lt_prog_compiler_static='-Bstatic' - ;; - esac - ;; - - mingw* | cygwin* | pw32* | os2* | cegcc*) - # This hack is so that the source file can tell whether it is being - # built for inclusion in a dll (and should export symbols for example). - lt_prog_compiler_pic='-DDLL_EXPORT' - case $host_os in - os2*) - lt_prog_compiler_static='$wl-static' - ;; - esac - ;; - - hpux9* | hpux10* | hpux11*) - lt_prog_compiler_wl='-Wl,' - # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but - # not for PA HP-UX. - case $host_cpu in - hppa*64*|ia64*) - # +Z the default - ;; - *) - lt_prog_compiler_pic='+Z' - ;; - esac - # Is there a better lt_prog_compiler_static that works with the bundled CC? - lt_prog_compiler_static='$wl-a ${wl}archive' - ;; - - irix5* | irix6* | nonstopux*) - lt_prog_compiler_wl='-Wl,' - # PIC (with -KPIC) is the default. - lt_prog_compiler_static='-non_shared' - ;; - - linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*) - case $cc_basename in - # old Intel for x86_64, which still supported -KPIC. - ecc*) - lt_prog_compiler_wl='-Wl,' - lt_prog_compiler_pic='-KPIC' - lt_prog_compiler_static='-static' - ;; - # icc used to be incompatible with GCC. - # ICC 10 doesn't accept -KPIC any more. - icc* | ifort*) - lt_prog_compiler_wl='-Wl,' - lt_prog_compiler_pic='-fPIC' - lt_prog_compiler_static='-static' - ;; - # Lahey Fortran 8.1. - lf95*) - lt_prog_compiler_wl='-Wl,' - lt_prog_compiler_pic='--shared' - lt_prog_compiler_static='--static' - ;; - nagfor*) - # NAG Fortran compiler - lt_prog_compiler_wl='-Wl,-Wl,,' - lt_prog_compiler_pic='-PIC' - lt_prog_compiler_static='-Bstatic' - ;; - tcc*) - # Fabrice Bellard et al's Tiny C Compiler - lt_prog_compiler_wl='-Wl,' - lt_prog_compiler_pic='-fPIC' - lt_prog_compiler_static='-static' - ;; - pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*) - # Portland Group compilers (*not* the Pentium gcc compiler, - # which looks to be a dead project) - lt_prog_compiler_wl='-Wl,' - lt_prog_compiler_pic='-fpic' - lt_prog_compiler_static='-Bstatic' - ;; - ccc*) - lt_prog_compiler_wl='-Wl,' - # All Alpha code is PIC. - lt_prog_compiler_static='-non_shared' - ;; - xl* | bgxl* | bgf* | mpixl*) - # IBM XL C 8.0/Fortran 10.1, 11.1 on PPC and BlueGene - lt_prog_compiler_wl='-Wl,' - lt_prog_compiler_pic='-qpic' - lt_prog_compiler_static='-qstaticlink' - ;; - *) - case `$CC -V 2>&1 | sed 5q` in - *Sun\ Ceres\ Fortran* | *Sun*Fortran*\ [1-7].* | *Sun*Fortran*\ 8.[0-3]*) - # Sun Fortran 8.3 passes all unrecognized flags to the linker - lt_prog_compiler_pic='-KPIC' - lt_prog_compiler_static='-Bstatic' - lt_prog_compiler_wl='' - ;; - *Sun\ F* | *Sun*Fortran*) - lt_prog_compiler_pic='-KPIC' - lt_prog_compiler_static='-Bstatic' - lt_prog_compiler_wl='-Qoption ld ' - ;; - *Sun\ C*) - # Sun C 5.9 - lt_prog_compiler_pic='-KPIC' - lt_prog_compiler_static='-Bstatic' - lt_prog_compiler_wl='-Wl,' - ;; - *Intel*\ [CF]*Compiler*) - lt_prog_compiler_wl='-Wl,' - lt_prog_compiler_pic='-fPIC' - lt_prog_compiler_static='-static' - ;; - *Portland\ Group*) - lt_prog_compiler_wl='-Wl,' - lt_prog_compiler_pic='-fpic' - lt_prog_compiler_static='-Bstatic' - ;; - esac - ;; - esac - ;; - - newsos6) - lt_prog_compiler_pic='-KPIC' - lt_prog_compiler_static='-Bstatic' - ;; - - *nto* | *qnx*) - # QNX uses GNU C++, but need to define -shared option too, otherwise - # it will coredump. - lt_prog_compiler_pic='-fPIC -shared' - ;; - - osf3* | osf4* | osf5*) - lt_prog_compiler_wl='-Wl,' - # All OSF/1 code is PIC. - lt_prog_compiler_static='-non_shared' - ;; - - rdos*) - lt_prog_compiler_static='-non_shared' - ;; - - solaris*) - lt_prog_compiler_pic='-KPIC' - lt_prog_compiler_static='-Bstatic' - case $cc_basename in - f77* | f90* | f95* | sunf77* | sunf90* | sunf95*) - lt_prog_compiler_wl='-Qoption ld ';; - *) - lt_prog_compiler_wl='-Wl,';; - esac - ;; - - sunos4*) - lt_prog_compiler_wl='-Qoption ld ' - lt_prog_compiler_pic='-PIC' - lt_prog_compiler_static='-Bstatic' - ;; - - sysv4 | sysv4.2uw2* | sysv4.3*) - lt_prog_compiler_wl='-Wl,' - lt_prog_compiler_pic='-KPIC' - lt_prog_compiler_static='-Bstatic' - ;; - - sysv4*MP*) - if test -d /usr/nec; then - lt_prog_compiler_pic='-Kconform_pic' - lt_prog_compiler_static='-Bstatic' - fi - ;; - - sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) - lt_prog_compiler_wl='-Wl,' - lt_prog_compiler_pic='-KPIC' - lt_prog_compiler_static='-Bstatic' - ;; - - unicos*) - lt_prog_compiler_wl='-Wl,' - lt_prog_compiler_can_build_shared=no - ;; - - uts4*) - lt_prog_compiler_pic='-pic' - lt_prog_compiler_static='-Bstatic' - ;; - - *) - lt_prog_compiler_can_build_shared=no - ;; - esac - fi - -case $host_os in - # For platforms that do not support PIC, -DPIC is meaningless: - *djgpp*) - lt_prog_compiler_pic= - ;; - *) - lt_prog_compiler_pic="$lt_prog_compiler_pic -DPIC" - ;; -esac - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $compiler option to produce PIC" >&5 -$as_echo_n "checking for $compiler option to produce PIC... " >&6; } -if ${lt_cv_prog_compiler_pic+:} false; then : - $as_echo_n "(cached) " >&6 -else - lt_cv_prog_compiler_pic=$lt_prog_compiler_pic -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic" >&5 -$as_echo "$lt_cv_prog_compiler_pic" >&6; } -lt_prog_compiler_pic=$lt_cv_prog_compiler_pic - -# -# Check to make sure the PIC flag actually works. -# -if test -n "$lt_prog_compiler_pic"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler PIC flag $lt_prog_compiler_pic works" >&5 -$as_echo_n "checking if $compiler PIC flag $lt_prog_compiler_pic works... " >&6; } -if ${lt_cv_prog_compiler_pic_works+:} false; then : - $as_echo_n "(cached) " >&6 -else - lt_cv_prog_compiler_pic_works=no - ac_outfile=conftest.$ac_objext - echo "$lt_simple_compile_test_code" > conftest.$ac_ext - lt_compiler_flag="$lt_prog_compiler_pic -DPIC" ## exclude from sc_useless_quotes_in_assignment - # Insert the option either (1) after the last *FLAGS variable, or - # (2) before a word containing "conftest.", or (3) at the end. - # Note that $ac_compile itself does not contain backslashes and begins - # with a dollar sign (not a hyphen), so the echo should work correctly. - # The option is referenced via a variable to avoid confusing sed. - lt_compile=`echo "$ac_compile" | $SED \ - -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ - -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ - -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5) - (eval "$lt_compile" 2>conftest.err) - ac_status=$? - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - if (exit $ac_status) && test -s "$ac_outfile"; then - # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings other than the usual output. - $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp - $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 - if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then - lt_cv_prog_compiler_pic_works=yes - fi - fi - $RM conftest* - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic_works" >&5 -$as_echo "$lt_cv_prog_compiler_pic_works" >&6; } - -if test yes = "$lt_cv_prog_compiler_pic_works"; then - case $lt_prog_compiler_pic in - "" | " "*) ;; - *) lt_prog_compiler_pic=" $lt_prog_compiler_pic" ;; - esac -else - lt_prog_compiler_pic= - lt_prog_compiler_can_build_shared=no -fi - -fi - - - - - - - - - - - -# -# Check to make sure the static flag actually works. -# -wl=$lt_prog_compiler_wl eval lt_tmp_static_flag=\"$lt_prog_compiler_static\" -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler static flag $lt_tmp_static_flag works" >&5 -$as_echo_n "checking if $compiler static flag $lt_tmp_static_flag works... " >&6; } -if ${lt_cv_prog_compiler_static_works+:} false; then : - $as_echo_n "(cached) " >&6 -else - lt_cv_prog_compiler_static_works=no - save_LDFLAGS=$LDFLAGS - LDFLAGS="$LDFLAGS $lt_tmp_static_flag" - echo "$lt_simple_link_test_code" > conftest.$ac_ext - if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then - # The linker can only warn and ignore the option if not recognized - # So say no if there are warnings - if test -s conftest.err; then - # Append any errors to the config.log. - cat conftest.err 1>&5 - $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp - $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 - if diff conftest.exp conftest.er2 >/dev/null; then - lt_cv_prog_compiler_static_works=yes - fi - else - lt_cv_prog_compiler_static_works=yes - fi - fi - $RM -r conftest* - LDFLAGS=$save_LDFLAGS - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_static_works" >&5 -$as_echo "$lt_cv_prog_compiler_static_works" >&6; } - -if test yes = "$lt_cv_prog_compiler_static_works"; then - : -else - lt_prog_compiler_static= -fi - - - - - - - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5 -$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; } -if ${lt_cv_prog_compiler_c_o+:} false; then : - $as_echo_n "(cached) " >&6 -else - lt_cv_prog_compiler_c_o=no - $RM -r conftest 2>/dev/null - mkdir conftest - cd conftest - mkdir out - echo "$lt_simple_compile_test_code" > conftest.$ac_ext - - lt_compiler_flag="-o out/conftest2.$ac_objext" - # Insert the option either (1) after the last *FLAGS variable, or - # (2) before a word containing "conftest.", or (3) at the end. - # Note that $ac_compile itself does not contain backslashes and begins - # with a dollar sign (not a hyphen), so the echo should work correctly. - lt_compile=`echo "$ac_compile" | $SED \ - -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ - -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ - -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5) - (eval "$lt_compile" 2>out/conftest.err) - ac_status=$? - cat out/conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - if (exit $ac_status) && test -s out/conftest2.$ac_objext - then - # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings - $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp - $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 - if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then - lt_cv_prog_compiler_c_o=yes - fi - fi - chmod u+w . 2>&5 - $RM conftest* - # SGI C++ compiler will create directory out/ii_files/ for - # template instantiation - test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files - $RM out/* && rmdir out - cd .. - $RM -r conftest - $RM conftest* - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o" >&5 -$as_echo "$lt_cv_prog_compiler_c_o" >&6; } - - - - - - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5 -$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; } -if ${lt_cv_prog_compiler_c_o+:} false; then : - $as_echo_n "(cached) " >&6 -else - lt_cv_prog_compiler_c_o=no - $RM -r conftest 2>/dev/null - mkdir conftest - cd conftest - mkdir out - echo "$lt_simple_compile_test_code" > conftest.$ac_ext - - lt_compiler_flag="-o out/conftest2.$ac_objext" - # Insert the option either (1) after the last *FLAGS variable, or - # (2) before a word containing "conftest.", or (3) at the end. - # Note that $ac_compile itself does not contain backslashes and begins - # with a dollar sign (not a hyphen), so the echo should work correctly. - lt_compile=`echo "$ac_compile" | $SED \ - -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ - -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ - -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5) - (eval "$lt_compile" 2>out/conftest.err) - ac_status=$? - cat out/conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - if (exit $ac_status) && test -s out/conftest2.$ac_objext - then - # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings - $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp - $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 - if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then - lt_cv_prog_compiler_c_o=yes - fi - fi - chmod u+w . 2>&5 - $RM conftest* - # SGI C++ compiler will create directory out/ii_files/ for - # template instantiation - test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files - $RM out/* && rmdir out - cd .. - $RM -r conftest - $RM conftest* - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o" >&5 -$as_echo "$lt_cv_prog_compiler_c_o" >&6; } - - - - -hard_links=nottested -if test no = "$lt_cv_prog_compiler_c_o" && test no != "$need_locks"; then - # do not overwrite the value of need_locks provided by the user - { $as_echo "$as_me:${as_lineno-$LINENO}: checking if we can lock with hard links" >&5 -$as_echo_n "checking if we can lock with hard links... " >&6; } - hard_links=yes - $RM conftest* - ln conftest.a conftest.b 2>/dev/null && hard_links=no - touch conftest.a - ln conftest.a conftest.b 2>&5 || hard_links=no - ln conftest.a conftest.b 2>/dev/null && hard_links=no - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $hard_links" >&5 -$as_echo "$hard_links" >&6; } - if test no = "$hard_links"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: '$CC' does not support '-c -o', so 'make -j' may be unsafe" >&5 -$as_echo "$as_me: WARNING: '$CC' does not support '-c -o', so 'make -j' may be unsafe" >&2;} - need_locks=warn - fi -else - need_locks=no -fi - - - - - - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $compiler linker ($LD) supports shared libraries" >&5 -$as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; } - - runpath_var= - allow_undefined_flag= - always_export_symbols=no - archive_cmds= - archive_expsym_cmds= - compiler_needs_object=no - enable_shared_with_static_runtimes=no - export_dynamic_flag_spec= - export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' - hardcode_automatic=no - hardcode_direct=no - hardcode_direct_absolute=no - hardcode_libdir_flag_spec= - hardcode_libdir_separator= - hardcode_minus_L=no - hardcode_shlibpath_var=unsupported - inherit_rpath=no - link_all_deplibs=unknown - module_cmds= - module_expsym_cmds= - old_archive_from_new_cmds= - old_archive_from_expsyms_cmds= - thread_safe_flag_spec= - whole_archive_flag_spec= - # include_expsyms should be a list of space-separated symbols to be *always* - # included in the symbol list - include_expsyms= - # exclude_expsyms can be an extended regexp of symbols to exclude - # it will be wrapped by ' (' and ')$', so one must not match beginning or - # end of line. Example: 'a|bc|.*d.*' will exclude the symbols 'a' and 'bc', - # as well as any symbol that contains 'd'. - exclude_expsyms='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*' - # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out - # platforms (ab)use it in PIC code, but their linkers get confused if - # the symbol is explicitly referenced. Since portable code cannot - # rely on this symbol name, it's probably fine to never include it in - # preloaded symbol tables. - # Exclude shared library initialization/finalization symbols. - extract_expsyms_cmds= - - case $host_os in - cygwin* | mingw* | pw32* | cegcc*) - # FIXME: the MSVC++ port hasn't been tested in a loooong time - # When not using gcc, we currently assume that we are using - # Microsoft Visual C++. - if test yes != "$GCC"; then - with_gnu_ld=no - fi - ;; - interix*) - # we just hope/assume this is gcc and not c89 (= MSVC++) - with_gnu_ld=yes - ;; - openbsd* | bitrig*) - with_gnu_ld=no - ;; - esac - - ld_shlibs=yes - - # On some targets, GNU ld is compatible enough with the native linker - # that we're better off using the native interface for both. - lt_use_gnu_ld_interface=no - if test yes = "$with_gnu_ld"; then - case $host_os in - aix*) - # The AIX port of GNU ld has always aspired to compatibility - # with the native linker. However, as the warning in the GNU ld - # block says, versions before 2.19.5* couldn't really create working - # shared libraries, regardless of the interface used. - case `$LD -v 2>&1` in - *\ \(GNU\ Binutils\)\ 2.19.5*) ;; - *\ \(GNU\ Binutils\)\ 2.[2-9]*) ;; - *\ \(GNU\ Binutils\)\ [3-9]*) ;; - *) - lt_use_gnu_ld_interface=yes - ;; - esac - ;; - *) - lt_use_gnu_ld_interface=yes - ;; - esac - fi - - if test yes = "$lt_use_gnu_ld_interface"; then - # If archive_cmds runs LD, not CC, wlarc should be empty - wlarc='$wl' - - # Set some defaults for GNU ld with shared library support. These - # are reset later if shared libraries are not supported. Putting them - # here allows them to be overridden if necessary. - runpath_var=LD_RUN_PATH - hardcode_libdir_flag_spec='$wl-rpath $wl$libdir' - export_dynamic_flag_spec='$wl--export-dynamic' - # ancient GNU ld didn't support --whole-archive et. al. - if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then - whole_archive_flag_spec=$wlarc'--whole-archive$convenience '$wlarc'--no-whole-archive' - else - whole_archive_flag_spec= - fi - supports_anon_versioning=no - case `$LD -v | $SED -e 's/(^)\+)\s\+//' 2>&1` in - *GNU\ gold*) supports_anon_versioning=yes ;; - *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11 - *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ... - *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ... - *\ 2.11.*) ;; # other 2.11 versions - *) supports_anon_versioning=yes ;; - esac - - # See if GNU ld supports shared libraries. - case $host_os in - aix[3-9]*) - # On AIX/PPC, the GNU linker is very broken - if test ia64 != "$host_cpu"; then - ld_shlibs=no - cat <<_LT_EOF 1>&2 - -*** Warning: the GNU linker, at least up to release 2.19, is reported -*** to be unable to reliably create shared libraries on AIX. -*** Therefore, libtool is disabling shared libraries support. If you -*** really care for shared libraries, you may want to install binutils -*** 2.20 or above, or modify your PATH so that a non-GNU linker is found. -*** You will then need to restart the configuration process. - -_LT_EOF - fi - ;; - - amigaos*) - case $host_cpu in - powerpc) - # see comment about AmigaOS4 .so support - archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' - archive_expsym_cmds='' - ;; - m68k) - archive_cmds='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' - hardcode_libdir_flag_spec='-L$libdir' - hardcode_minus_L=yes - ;; - esac - ;; - - beos*) - if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then - allow_undefined_flag=unsupported - # Joseph Beckenbach says some releases of gcc - # support --undefined. This deserves some investigation. FIXME - archive_cmds='$CC -nostart $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' - else - ld_shlibs=no - fi - ;; - - cygwin* | mingw* | pw32* | cegcc*) - # _LT_TAGVAR(hardcode_libdir_flag_spec, ) is actually meaningless, - # as there is no search path for DLLs. - hardcode_libdir_flag_spec='-L$libdir' - export_dynamic_flag_spec='$wl--export-all-symbols' - allow_undefined_flag=unsupported - always_export_symbols=no - enable_shared_with_static_runtimes=yes - export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/;s/^.*[ ]__nm__\([^ ]*\)[ ][^ ]*/\1 DATA/;/^I[ ]/d;/^[AITW][ ]/s/.* //'\'' | sort | uniq > $export_symbols' - exclude_expsyms='[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname' - - if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then - archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname $wl--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' - # If the export-symbols file already is a .def file, use it as - # is; otherwise, prepend EXPORTS... - archive_expsym_cmds='if test DEF = "`$SED -n -e '\''s/^[ ]*//'\'' -e '\''/^\(;.*\)*$/d'\'' -e '\''s/^\(EXPORTS\|LIBRARY\)\([ ].*\)*$/DEF/p'\'' -e q $export_symbols`" ; then - cp $export_symbols $output_objdir/$soname.def; - else - echo EXPORTS > $output_objdir/$soname.def; - cat $export_symbols >> $output_objdir/$soname.def; - fi~ - $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname $wl--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' - else - ld_shlibs=no - fi - ;; - - haiku*) - archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' - link_all_deplibs=yes - ;; - - os2*) - hardcode_libdir_flag_spec='-L$libdir' - hardcode_minus_L=yes - allow_undefined_flag=unsupported - shrext_cmds=.dll - archive_cmds='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~ - $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~ - $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~ - $ECHO EXPORTS >> $output_objdir/$libname.def~ - emxexp $libobjs | $SED /"_DLL_InitTerm"/d >> $output_objdir/$libname.def~ - $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~ - emximp -o $lib $output_objdir/$libname.def' - archive_expsym_cmds='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~ - $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~ - $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~ - $ECHO EXPORTS >> $output_objdir/$libname.def~ - prefix_cmds="$SED"~ - if test EXPORTS = "`$SED 1q $export_symbols`"; then - prefix_cmds="$prefix_cmds -e 1d"; - fi~ - prefix_cmds="$prefix_cmds -e \"s/^\(.*\)$/_\1/g\""~ - cat $export_symbols | $prefix_cmds >> $output_objdir/$libname.def~ - $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~ - emximp -o $lib $output_objdir/$libname.def' - old_archive_From_new_cmds='emximp -o $output_objdir/${libname}_dll.a $output_objdir/$libname.def' - enable_shared_with_static_runtimes=yes - ;; - - interix[3-9]*) - hardcode_direct=no - hardcode_shlibpath_var=no - hardcode_libdir_flag_spec='$wl-rpath,$libdir' - export_dynamic_flag_spec='$wl-E' - # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. - # Instead, shared libraries are loaded at an image base (0x10000000 by - # default) and relocated if they conflict, which is a slow very memory - # consuming and fragmenting process. To avoid this, we pick a random, - # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link - # time. Moving up from 0x10000000 also allows more sbrk(2) space. - archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' - archive_expsym_cmds='sed "s|^|_|" $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--retain-symbols-file,$output_objdir/$soname.expsym $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' - ;; - - gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu) - tmp_diet=no - if test linux-dietlibc = "$host_os"; then - case $cc_basename in - diet\ *) tmp_diet=yes;; # linux-dietlibc with static linking (!diet-dyn) - esac - fi - if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \ - && test no = "$tmp_diet" - then - tmp_addflag=' $pic_flag' - tmp_sharedflag='-shared' - case $cc_basename,$host_cpu in - pgcc*) # Portland Group C compiler - whole_archive_flag_spec='$wl--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive' - tmp_addflag=' $pic_flag' - ;; - pgf77* | pgf90* | pgf95* | pgfortran*) - # Portland Group f77 and f90 compilers - whole_archive_flag_spec='$wl--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive' - tmp_addflag=' $pic_flag -Mnomain' ;; - ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64 - tmp_addflag=' -i_dynamic' ;; - efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64 - tmp_addflag=' -i_dynamic -nofor_main' ;; - ifc* | ifort*) # Intel Fortran compiler - tmp_addflag=' -nofor_main' ;; - lf95*) # Lahey Fortran 8.1 - whole_archive_flag_spec= - tmp_sharedflag='--shared' ;; - nagfor*) # NAGFOR 5.3 - tmp_sharedflag='-Wl,-shared' ;; - xl[cC]* | bgxl[cC]* | mpixl[cC]*) # IBM XL C 8.0 on PPC (deal with xlf below) - tmp_sharedflag='-qmkshrobj' - tmp_addflag= ;; - nvcc*) # Cuda Compiler Driver 2.2 - whole_archive_flag_spec='$wl--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive' - compiler_needs_object=yes - ;; - esac - case `$CC -V 2>&1 | sed 5q` in - *Sun\ C*) # Sun C 5.9 - whole_archive_flag_spec='$wl--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive' - compiler_needs_object=yes - tmp_sharedflag='-G' ;; - *Sun\ F*) # Sun Fortran 8.3 - tmp_sharedflag='-G' ;; - esac - archive_cmds='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' - - if test yes = "$supports_anon_versioning"; then - archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~ - cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ - echo "local: *; };" >> $output_objdir/$libname.ver~ - $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-version-script $wl$output_objdir/$libname.ver -o $lib' - fi - - case $cc_basename in - tcc*) - export_dynamic_flag_spec='-rdynamic' - ;; - xlf* | bgf* | bgxlf* | mpixlf*) - # IBM XL Fortran 10.1 on PPC cannot create shared libs itself - whole_archive_flag_spec='--whole-archive$convenience --no-whole-archive' - hardcode_libdir_flag_spec='$wl-rpath $wl$libdir' - archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname -o $lib' - if test yes = "$supports_anon_versioning"; then - archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~ - cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ - echo "local: *; };" >> $output_objdir/$libname.ver~ - $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib' - fi - ;; - esac - else - ld_shlibs=no - fi - ;; - - netbsd*) - if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then - archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' - wlarc= - else - archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' - archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib' - fi - ;; - - solaris*) - if $LD -v 2>&1 | $GREP 'BFD 2\.8' > /dev/null; then - ld_shlibs=no - cat <<_LT_EOF 1>&2 - -*** Warning: The releases 2.8.* of the GNU linker cannot reliably -*** create shared libraries on Solaris systems. Therefore, libtool -*** is disabling shared libraries support. We urge you to upgrade GNU -*** binutils to release 2.9.1 or newer. Another option is to modify -*** your PATH or compiler configuration so that the native linker is -*** used, and then restart. - -_LT_EOF - elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then - archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' - archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib' - else - ld_shlibs=no - fi - ;; - - sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*) - case `$LD -v 2>&1` in - *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*) - ld_shlibs=no - cat <<_LT_EOF 1>&2 - -*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 cannot -*** reliably create shared libraries on SCO systems. Therefore, libtool -*** is disabling shared libraries support. We urge you to upgrade GNU -*** binutils to release 2.16.91.0.3 or newer. Another option is to modify -*** your PATH or compiler configuration so that the native linker is -*** used, and then restart. - -_LT_EOF - ;; - *) - # For security reasons, it is highly recommended that you always - # use absolute paths for naming shared libraries, and exclude the - # DT_RUNPATH tag from executables and libraries. But doing so - # requires that you compile everything twice, which is a pain. - if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then - hardcode_libdir_flag_spec='$wl-rpath $wl$libdir' - archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' - archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib' - else - ld_shlibs=no - fi - ;; - esac - ;; - - sunos4*) - archive_cmds='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' - wlarc= - hardcode_direct=yes - hardcode_shlibpath_var=no - ;; - - *) - if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then - archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' - archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib' - else - ld_shlibs=no - fi - ;; - esac - - if test no = "$ld_shlibs"; then - runpath_var= - hardcode_libdir_flag_spec= - export_dynamic_flag_spec= - whole_archive_flag_spec= - fi - else - # PORTME fill in a description of your system's linker (not GNU ld) - case $host_os in - aix3*) - allow_undefined_flag=unsupported - always_export_symbols=yes - archive_expsym_cmds='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname' - # Note: this linker hardcodes the directories in LIBPATH if there - # are no directories specified by -L. - hardcode_minus_L=yes - if test yes = "$GCC" && test -z "$lt_prog_compiler_static"; then - # Neither direct hardcoding nor static linking is supported with a - # broken collect2. - hardcode_direct=unsupported - fi - ;; - - aix[4-9]*) - if test ia64 = "$host_cpu"; then - # On IA64, the linker does run time linking by default, so we don't - # have to do anything special. - aix_use_runtimelinking=no - exp_sym_flag='-Bexport' - no_entry_flag= - else - # If we're using GNU nm, then we don't want the "-C" option. - # -C means demangle to GNU nm, but means don't demangle to AIX nm. - # Without the "-l" option, or with the "-B" option, AIX nm treats - # weak defined symbols like other global defined symbols, whereas - # GNU nm marks them as "W". - # While the 'weak' keyword is ignored in the Export File, we need - # it in the Import File for the 'aix-soname' feature, so we have - # to replace the "-B" option with "-P" for AIX nm. - if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then - export_symbols_cmds='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && (substr(\$ 3,1,1) != ".")) { if (\$ 2 == "W") { print \$ 3 " weak" } else { print \$ 3 } } }'\'' | sort -u > $export_symbols' - else - export_symbols_cmds='`func_echo_all $NM | $SED -e '\''s/B\([^B]*\)$/P\1/'\''` -PCpgl $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) && (substr(\$ 1,1,1) != ".")) { if ((\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) { print \$ 1 " weak" } else { print \$ 1 } } }'\'' | sort -u > $export_symbols' - fi - aix_use_runtimelinking=no - - # Test if we are trying to use run time linking or normal - # AIX style linking. If -brtl is somewhere in LDFLAGS, we - # have runtime linking enabled, and use it for executables. - # For shared libraries, we enable/disable runtime linking - # depending on the kind of the shared library created - - # when "with_aix_soname,aix_use_runtimelinking" is: - # "aix,no" lib.a(lib.so.V) shared, rtl:no, for executables - # "aix,yes" lib.so shared, rtl:yes, for executables - # lib.a static archive - # "both,no" lib.so.V(shr.o) shared, rtl:yes - # lib.a(lib.so.V) shared, rtl:no, for executables - # "both,yes" lib.so.V(shr.o) shared, rtl:yes, for executables - # lib.a(lib.so.V) shared, rtl:no - # "svr4,*" lib.so.V(shr.o) shared, rtl:yes, for executables - # lib.a static archive - case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*) - for ld_flag in $LDFLAGS; do - if (test x-brtl = "x$ld_flag" || test x-Wl,-brtl = "x$ld_flag"); then - aix_use_runtimelinking=yes - break - fi - done - if test svr4,no = "$with_aix_soname,$aix_use_runtimelinking"; then - # With aix-soname=svr4, we create the lib.so.V shared archives only, - # so we don't have lib.a shared libs to link our executables. - # We have to force runtime linking in this case. - aix_use_runtimelinking=yes - LDFLAGS="$LDFLAGS -Wl,-brtl" - fi - ;; - esac - - exp_sym_flag='-bexport' - no_entry_flag='-bnoentry' - fi - - # When large executables or shared objects are built, AIX ld can - # have problems creating the table of contents. If linking a library - # or program results in "error TOC overflow" add -mminimal-toc to - # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not - # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. - - archive_cmds='' - hardcode_direct=yes - hardcode_direct_absolute=yes - hardcode_libdir_separator=':' - link_all_deplibs=yes - file_list_spec='$wl-f,' - case $with_aix_soname,$aix_use_runtimelinking in - aix,*) ;; # traditional, no import file - svr4,* | *,yes) # use import file - # The Import File defines what to hardcode. - hardcode_direct=no - hardcode_direct_absolute=no - ;; - esac - - if test yes = "$GCC"; then - case $host_os in aix4.[012]|aix4.[012].*) - # We only want to do this on AIX 4.2 and lower, the check - # below for broken collect2 doesn't work under 4.3+ - collect2name=`$CC -print-prog-name=collect2` - if test -f "$collect2name" && - strings "$collect2name" | $GREP resolve_lib_name >/dev/null - then - # We have reworked collect2 - : - else - # We have old collect2 - hardcode_direct=unsupported - # It fails to find uninstalled libraries when the uninstalled - # path is not listed in the libpath. Setting hardcode_minus_L - # to unsupported forces relinking - hardcode_minus_L=yes - hardcode_libdir_flag_spec='-L$libdir' - hardcode_libdir_separator= - fi - ;; - esac - shared_flag='-shared' - if test yes = "$aix_use_runtimelinking"; then - shared_flag="$shared_flag "'$wl-G' - fi - # Need to ensure runtime linking is disabled for the traditional - # shared library, or the linker may eventually find shared libraries - # /with/ Import File - we do not want to mix them. - shared_flag_aix='-shared' - shared_flag_svr4='-shared $wl-G' - else - # not using gcc - if test ia64 = "$host_cpu"; then - # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release - # chokes on -Wl,-G. The following line is correct: - shared_flag='-G' - else - if test yes = "$aix_use_runtimelinking"; then - shared_flag='$wl-G' - else - shared_flag='$wl-bM:SRE' - fi - shared_flag_aix='$wl-bM:SRE' - shared_flag_svr4='$wl-G' - fi - fi - - export_dynamic_flag_spec='$wl-bexpall' - # It seems that -bexpall does not export symbols beginning with - # underscore (_), so it is better to generate a list of symbols to export. - always_export_symbols=yes - if test aix,yes = "$with_aix_soname,$aix_use_runtimelinking"; then - # Warning - without using the other runtime loading flags (-brtl), - # -berok will link without error, but may produce a broken library. - allow_undefined_flag='-berok' - # Determine the default libpath from the value encoded in an - # empty executable. - if test set = "${lt_cv_aix_libpath+set}"; then - aix_libpath=$lt_cv_aix_libpath -else - if ${lt_cv_aix_libpath_+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - - lt_aix_libpath_sed=' - /Import File Strings/,/^$/ { - /^0/ { - s/^0 *\([^ ]*\) *$/\1/ - p - } - }' - lt_cv_aix_libpath_=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` - # Check for a 64-bit object if we didn't find anything. - if test -z "$lt_cv_aix_libpath_"; then - lt_cv_aix_libpath_=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` - fi -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext - if test -z "$lt_cv_aix_libpath_"; then - lt_cv_aix_libpath_=/usr/lib:/lib - fi - -fi - - aix_libpath=$lt_cv_aix_libpath_ -fi - - hardcode_libdir_flag_spec='$wl-blibpath:$libdir:'"$aix_libpath" - archive_expsym_cmds='$CC -o $output_objdir/$soname $libobjs $deplibs $wl'$no_entry_flag' $compiler_flags `if test -n "$allow_undefined_flag"; then func_echo_all "$wl$allow_undefined_flag"; else :; fi` $wl'$exp_sym_flag:\$export_symbols' '$shared_flag - else - if test ia64 = "$host_cpu"; then - hardcode_libdir_flag_spec='$wl-R $libdir:/usr/lib:/lib' - allow_undefined_flag="-z nodefs" - archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\$wl$no_entry_flag"' $compiler_flags $wl$allow_undefined_flag '"\$wl$exp_sym_flag:\$export_symbols" - else - # Determine the default libpath from the value encoded in an - # empty executable. - if test set = "${lt_cv_aix_libpath+set}"; then - aix_libpath=$lt_cv_aix_libpath -else - if ${lt_cv_aix_libpath_+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - - lt_aix_libpath_sed=' - /Import File Strings/,/^$/ { - /^0/ { - s/^0 *\([^ ]*\) *$/\1/ - p - } - }' - lt_cv_aix_libpath_=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` - # Check for a 64-bit object if we didn't find anything. - if test -z "$lt_cv_aix_libpath_"; then - lt_cv_aix_libpath_=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` - fi -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext - if test -z "$lt_cv_aix_libpath_"; then - lt_cv_aix_libpath_=/usr/lib:/lib - fi - -fi - - aix_libpath=$lt_cv_aix_libpath_ -fi - - hardcode_libdir_flag_spec='$wl-blibpath:$libdir:'"$aix_libpath" - # Warning - without using the other run time loading flags, - # -berok will link without error, but may produce a broken library. - no_undefined_flag=' $wl-bernotok' - allow_undefined_flag=' $wl-berok' - if test yes = "$with_gnu_ld"; then - # We only use this code for GNU lds that support --whole-archive. - whole_archive_flag_spec='$wl--whole-archive$convenience $wl--no-whole-archive' - else - # Exported symbols can be pulled into shared objects from archives - whole_archive_flag_spec='$convenience' - fi - archive_cmds_need_lc=yes - archive_expsym_cmds='$RM -r $output_objdir/$realname.d~$MKDIR $output_objdir/$realname.d' - # -brtl affects multiple linker settings, -berok does not and is overridden later - compiler_flags_filtered='`func_echo_all "$compiler_flags " | $SED -e "s%-brtl\\([, ]\\)%-berok\\1%g"`' - if test svr4 != "$with_aix_soname"; then - # This is similar to how AIX traditionally builds its shared libraries. - archive_expsym_cmds="$archive_expsym_cmds"'~$CC '$shared_flag_aix' -o $output_objdir/$realname.d/$soname $libobjs $deplibs $wl-bnoentry '$compiler_flags_filtered'$wl-bE:$export_symbols$allow_undefined_flag~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$realname.d/$soname' - fi - if test aix != "$with_aix_soname"; then - archive_expsym_cmds="$archive_expsym_cmds"'~$CC '$shared_flag_svr4' -o $output_objdir/$realname.d/$shared_archive_member_spec.o $libobjs $deplibs $wl-bnoentry '$compiler_flags_filtered'$wl-bE:$export_symbols$allow_undefined_flag~$STRIP -e $output_objdir/$realname.d/$shared_archive_member_spec.o~( func_echo_all "#! $soname($shared_archive_member_spec.o)"; if test shr_64 = "$shared_archive_member_spec"; then func_echo_all "# 64"; else func_echo_all "# 32"; fi; cat $export_symbols ) > $output_objdir/$realname.d/$shared_archive_member_spec.imp~$AR $AR_FLAGS $output_objdir/$soname $output_objdir/$realname.d/$shared_archive_member_spec.o $output_objdir/$realname.d/$shared_archive_member_spec.imp' - else - # used by -dlpreopen to get the symbols - archive_expsym_cmds="$archive_expsym_cmds"'~$MV $output_objdir/$realname.d/$soname $output_objdir' - fi - archive_expsym_cmds="$archive_expsym_cmds"'~$RM -r $output_objdir/$realname.d' - fi - fi - ;; - - amigaos*) - case $host_cpu in - powerpc) - # see comment about AmigaOS4 .so support - archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' - archive_expsym_cmds='' - ;; - m68k) - archive_cmds='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' - hardcode_libdir_flag_spec='-L$libdir' - hardcode_minus_L=yes - ;; - esac - ;; - - bsdi[45]*) - export_dynamic_flag_spec=-rdynamic - ;; - - cygwin* | mingw* | pw32* | cegcc*) - # When not using gcc, we currently assume that we are using - # Microsoft Visual C++. - # hardcode_libdir_flag_spec is actually meaningless, as there is - # no search path for DLLs. - case $cc_basename in - cl*) - # Native MSVC - hardcode_libdir_flag_spec=' ' - allow_undefined_flag=unsupported - always_export_symbols=yes - file_list_spec='@' - # Tell ltmain to make .lib files, not .a files. - libext=lib - # Tell ltmain to make .dll files, not .so files. - shrext_cmds=.dll - # FIXME: Setting linknames here is a bad hack. - archive_cmds='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~linknames=' - archive_expsym_cmds='if test DEF = "`$SED -n -e '\''s/^[ ]*//'\'' -e '\''/^\(;.*\)*$/d'\'' -e '\''s/^\(EXPORTS\|LIBRARY\)\([ ].*\)*$/DEF/p'\'' -e q $export_symbols`" ; then - cp "$export_symbols" "$output_objdir/$soname.def"; - echo "$tool_output_objdir$soname.def" > "$output_objdir/$soname.exp"; - else - $SED -e '\''s/^/-link -EXPORT:/'\'' < $export_symbols > $output_objdir/$soname.exp; - fi~ - $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~ - linknames=' - # The linker will not automatically build a static lib if we build a DLL. - # _LT_TAGVAR(old_archive_from_new_cmds, )='true' - enable_shared_with_static_runtimes=yes - exclude_expsyms='_NULL_IMPORT_DESCRIPTOR|_IMPORT_DESCRIPTOR_.*' - export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1,DATA/'\'' | $SED -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols' - # Don't use ranlib - old_postinstall_cmds='chmod 644 $oldlib' - postlink_cmds='lt_outputfile="@OUTPUT@"~ - lt_tool_outputfile="@TOOL_OUTPUT@"~ - case $lt_outputfile in - *.exe|*.EXE) ;; - *) - lt_outputfile=$lt_outputfile.exe - lt_tool_outputfile=$lt_tool_outputfile.exe - ;; - esac~ - if test : != "$MANIFEST_TOOL" && test -f "$lt_outputfile.manifest"; then - $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1; - $RM "$lt_outputfile.manifest"; - fi' - ;; - *) - # Assume MSVC wrapper - hardcode_libdir_flag_spec=' ' - allow_undefined_flag=unsupported - # Tell ltmain to make .lib files, not .a files. - libext=lib - # Tell ltmain to make .dll files, not .so files. - shrext_cmds=.dll - # FIXME: Setting linknames here is a bad hack. - archive_cmds='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames=' - # The linker will automatically build a .lib file if we build a DLL. - old_archive_from_new_cmds='true' - # FIXME: Should let the user specify the lib program. - old_archive_cmds='lib -OUT:$oldlib$oldobjs$old_deplibs' - enable_shared_with_static_runtimes=yes - ;; - esac - ;; - - darwin* | rhapsody*) - - - archive_cmds_need_lc=no - hardcode_direct=no - hardcode_automatic=yes - hardcode_shlibpath_var=unsupported - if test yes = "$lt_cv_ld_force_load"; then - whole_archive_flag_spec='`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience $wl-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`' - - else - whole_archive_flag_spec='' - fi - link_all_deplibs=yes - allow_undefined_flag=$_lt_dar_allow_undefined - case $cc_basename in - ifort*|nagfor*) _lt_dar_can_shared=yes ;; - *) _lt_dar_can_shared=$GCC ;; - esac - if test yes = "$_lt_dar_can_shared"; then - output_verbose_link_cmd=func_echo_all - archive_cmds="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod$_lt_dsymutil" - module_cmds="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags$_lt_dsymutil" - archive_expsym_cmds="sed 's|^|_|' < \$export_symbols > \$output_objdir/\$libname-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod$_lt_dar_export_syms$_lt_dsymutil" - module_expsym_cmds="sed -e 's|^|_|' < \$export_symbols > \$output_objdir/\$libname-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags$_lt_dar_export_syms$_lt_dsymutil" - - else - ld_shlibs=no - fi - - ;; - - dgux*) - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_libdir_flag_spec='-L$libdir' - hardcode_shlibpath_var=no - ;; - - # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor - # support. Future versions do this automatically, but an explicit c++rt0.o - # does not break anything, and helps significantly (at the cost of a little - # extra space). - freebsd2.2*) - archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o' - hardcode_libdir_flag_spec='-R$libdir' - hardcode_direct=yes - hardcode_shlibpath_var=no - ;; - - # Unfortunately, older versions of FreeBSD 2 do not have this feature. - freebsd2.*) - archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' - hardcode_direct=yes - hardcode_minus_L=yes - hardcode_shlibpath_var=no - ;; - - # FreeBSD 3 and greater uses gcc -shared to do shared libraries. - freebsd* | dragonfly*) - archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' - hardcode_libdir_flag_spec='-R$libdir' - hardcode_direct=yes - hardcode_shlibpath_var=no - ;; - - hpux9*) - if test yes = "$GCC"; then - archive_cmds='$RM $output_objdir/$soname~$CC -shared $pic_flag $wl+b $wl$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test "x$output_objdir/$soname" = "x$lib" || mv $output_objdir/$soname $lib' - else - archive_cmds='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test "x$output_objdir/$soname" = "x$lib" || mv $output_objdir/$soname $lib' - fi - hardcode_libdir_flag_spec='$wl+b $wl$libdir' - hardcode_libdir_separator=: - hardcode_direct=yes - - # hardcode_minus_L: Not really in the search PATH, - # but as the default location of the library. - hardcode_minus_L=yes - export_dynamic_flag_spec='$wl-E' - ;; - - hpux10*) - if test yes,no = "$GCC,$with_gnu_ld"; then - archive_cmds='$CC -shared $pic_flag $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $libobjs $deplibs $compiler_flags' - else - archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' - fi - if test no = "$with_gnu_ld"; then - hardcode_libdir_flag_spec='$wl+b $wl$libdir' - hardcode_libdir_separator=: - hardcode_direct=yes - hardcode_direct_absolute=yes - export_dynamic_flag_spec='$wl-E' - # hardcode_minus_L: Not really in the search PATH, - # but as the default location of the library. - hardcode_minus_L=yes - fi - ;; - - hpux11*) - if test yes,no = "$GCC,$with_gnu_ld"; then - case $host_cpu in - hppa*64*) - archive_cmds='$CC -shared $wl+h $wl$soname -o $lib $libobjs $deplibs $compiler_flags' - ;; - ia64*) - archive_cmds='$CC -shared $pic_flag $wl+h $wl$soname $wl+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' - ;; - *) - archive_cmds='$CC -shared $pic_flag $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $libobjs $deplibs $compiler_flags' - ;; - esac - else - case $host_cpu in - hppa*64*) - archive_cmds='$CC -b $wl+h $wl$soname -o $lib $libobjs $deplibs $compiler_flags' - ;; - ia64*) - archive_cmds='$CC -b $wl+h $wl$soname $wl+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' - ;; - *) - - # Older versions of the 11.00 compiler do not understand -b yet - # (HP92453-01 A.11.01.20 doesn't, HP92453-01 B.11.X.35175-35176.GP does) - { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC understands -b" >&5 -$as_echo_n "checking if $CC understands -b... " >&6; } -if ${lt_cv_prog_compiler__b+:} false; then : - $as_echo_n "(cached) " >&6 -else - lt_cv_prog_compiler__b=no - save_LDFLAGS=$LDFLAGS - LDFLAGS="$LDFLAGS -b" - echo "$lt_simple_link_test_code" > conftest.$ac_ext - if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then - # The linker can only warn and ignore the option if not recognized - # So say no if there are warnings - if test -s conftest.err; then - # Append any errors to the config.log. - cat conftest.err 1>&5 - $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp - $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 - if diff conftest.exp conftest.er2 >/dev/null; then - lt_cv_prog_compiler__b=yes - fi - else - lt_cv_prog_compiler__b=yes - fi - fi - $RM -r conftest* - LDFLAGS=$save_LDFLAGS - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler__b" >&5 -$as_echo "$lt_cv_prog_compiler__b" >&6; } - -if test yes = "$lt_cv_prog_compiler__b"; then - archive_cmds='$CC -b $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $libobjs $deplibs $compiler_flags' -else - archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' -fi - - ;; - esac - fi - if test no = "$with_gnu_ld"; then - hardcode_libdir_flag_spec='$wl+b $wl$libdir' - hardcode_libdir_separator=: - - case $host_cpu in - hppa*64*|ia64*) - hardcode_direct=no - hardcode_shlibpath_var=no - ;; - *) - hardcode_direct=yes - hardcode_direct_absolute=yes - export_dynamic_flag_spec='$wl-E' - - # hardcode_minus_L: Not really in the search PATH, - # but as the default location of the library. - hardcode_minus_L=yes - ;; - esac - fi - ;; - - irix5* | irix6* | nonstopux*) - if test yes = "$GCC"; then - archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib' - # Try to use the -exported_symbol ld option, if it does not - # work, assume that -exports_file does not work either and - # implicitly export all symbols. - # This should be the same for all languages, so no per-tag cache variable. - { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $host_os linker accepts -exported_symbol" >&5 -$as_echo_n "checking whether the $host_os linker accepts -exported_symbol... " >&6; } -if ${lt_cv_irix_exported_symbol+:} false; then : - $as_echo_n "(cached) " >&6 -else - save_LDFLAGS=$LDFLAGS - LDFLAGS="$LDFLAGS -shared $wl-exported_symbol ${wl}foo $wl-update_registry $wl/dev/null" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -int foo (void) { return 0; } -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - lt_cv_irix_exported_symbol=yes -else - lt_cv_irix_exported_symbol=no -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext - LDFLAGS=$save_LDFLAGS -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_irix_exported_symbol" >&5 -$as_echo "$lt_cv_irix_exported_symbol" >&6; } - if test yes = "$lt_cv_irix_exported_symbol"; then - archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations $wl-exports_file $wl$export_symbols -o $lib' - fi - else - archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib' - archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -exports_file $export_symbols -o $lib' - fi - archive_cmds_need_lc='no' - hardcode_libdir_flag_spec='$wl-rpath $wl$libdir' - hardcode_libdir_separator=: - inherit_rpath=yes - link_all_deplibs=yes - ;; - - linux*) - case $cc_basename in - tcc*) - # Fabrice Bellard et al's Tiny C Compiler - ld_shlibs=yes - archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' - ;; - esac - ;; - - netbsd*) - if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then - archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out - else - archive_cmds='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF - fi - hardcode_libdir_flag_spec='-R$libdir' - hardcode_direct=yes - hardcode_shlibpath_var=no - ;; - - newsos6) - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_direct=yes - hardcode_libdir_flag_spec='$wl-rpath $wl$libdir' - hardcode_libdir_separator=: - hardcode_shlibpath_var=no - ;; - - *nto* | *qnx*) - ;; - - openbsd* | bitrig*) - if test -f /usr/libexec/ld.so; then - hardcode_direct=yes - hardcode_shlibpath_var=no - hardcode_direct_absolute=yes - if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`"; then - archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' - archive_expsym_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags $wl-retain-symbols-file,$export_symbols' - hardcode_libdir_flag_spec='$wl-rpath,$libdir' - export_dynamic_flag_spec='$wl-E' - else - archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' - hardcode_libdir_flag_spec='$wl-rpath,$libdir' - fi - else - ld_shlibs=no - fi - ;; - - os2*) - hardcode_libdir_flag_spec='-L$libdir' - hardcode_minus_L=yes - allow_undefined_flag=unsupported - shrext_cmds=.dll - archive_cmds='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~ - $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~ - $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~ - $ECHO EXPORTS >> $output_objdir/$libname.def~ - emxexp $libobjs | $SED /"_DLL_InitTerm"/d >> $output_objdir/$libname.def~ - $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~ - emximp -o $lib $output_objdir/$libname.def' - archive_expsym_cmds='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~ - $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~ - $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~ - $ECHO EXPORTS >> $output_objdir/$libname.def~ - prefix_cmds="$SED"~ - if test EXPORTS = "`$SED 1q $export_symbols`"; then - prefix_cmds="$prefix_cmds -e 1d"; - fi~ - prefix_cmds="$prefix_cmds -e \"s/^\(.*\)$/_\1/g\""~ - cat $export_symbols | $prefix_cmds >> $output_objdir/$libname.def~ - $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~ - emximp -o $lib $output_objdir/$libname.def' - old_archive_From_new_cmds='emximp -o $output_objdir/${libname}_dll.a $output_objdir/$libname.def' - enable_shared_with_static_runtimes=yes - ;; - - osf3*) - if test yes = "$GCC"; then - allow_undefined_flag=' $wl-expect_unresolved $wl\*' - archive_cmds='$CC -shared$allow_undefined_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib' - else - allow_undefined_flag=' -expect_unresolved \*' - archive_cmds='$CC -shared$allow_undefined_flag $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib' - fi - archive_cmds_need_lc='no' - hardcode_libdir_flag_spec='$wl-rpath $wl$libdir' - hardcode_libdir_separator=: - ;; - - osf4* | osf5*) # as osf3* with the addition of -msym flag - if test yes = "$GCC"; then - allow_undefined_flag=' $wl-expect_unresolved $wl\*' - archive_cmds='$CC -shared$allow_undefined_flag $pic_flag $libobjs $deplibs $compiler_flags $wl-msym $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib' - hardcode_libdir_flag_spec='$wl-rpath $wl$libdir' - else - allow_undefined_flag=' -expect_unresolved \*' - archive_cmds='$CC -shared$allow_undefined_flag $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib' - archive_expsym_cmds='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~ - $CC -shared$allow_undefined_flag $wl-input $wl$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib~$RM $lib.exp' - - # Both c and cxx compiler support -rpath directly - hardcode_libdir_flag_spec='-rpath $libdir' - fi - archive_cmds_need_lc='no' - hardcode_libdir_separator=: - ;; - - solaris*) - no_undefined_flag=' -z defs' - if test yes = "$GCC"; then - wlarc='$wl' - archive_cmds='$CC -shared $pic_flag $wl-z ${wl}text $wl-h $wl$soname -o $lib $libobjs $deplibs $compiler_flags' - archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ - $CC -shared $pic_flag $wl-z ${wl}text $wl-M $wl$lib.exp $wl-h $wl$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' - else - case `$CC -V 2>&1` in - *"Compilers 5.0"*) - wlarc='' - archive_cmds='$LD -G$allow_undefined_flag -h $soname -o $lib $libobjs $deplibs $linker_flags' - archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ - $LD -G$allow_undefined_flag -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp' - ;; - *) - wlarc='$wl' - archive_cmds='$CC -G$allow_undefined_flag -h $soname -o $lib $libobjs $deplibs $compiler_flags' - archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ - $CC -G$allow_undefined_flag -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' - ;; - esac - fi - hardcode_libdir_flag_spec='-R$libdir' - hardcode_shlibpath_var=no - case $host_os in - solaris2.[0-5] | solaris2.[0-5].*) ;; - *) - # The compiler driver will combine and reorder linker options, - # but understands '-z linker_flag'. GCC discards it without '$wl', - # but is careful enough not to reorder. - # Supported since Solaris 2.6 (maybe 2.5.1?) - if test yes = "$GCC"; then - whole_archive_flag_spec='$wl-z ${wl}allextract$convenience $wl-z ${wl}defaultextract' - else - whole_archive_flag_spec='-z allextract$convenience -z defaultextract' - fi - ;; - esac - link_all_deplibs=yes - ;; - - sunos4*) - if test sequent = "$host_vendor"; then - # Use $CC to link under sequent, because it throws in some extra .o - # files that make .init and .fini sections work. - archive_cmds='$CC -G $wl-h $soname -o $lib $libobjs $deplibs $compiler_flags' - else - archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' - fi - hardcode_libdir_flag_spec='-L$libdir' - hardcode_direct=yes - hardcode_minus_L=yes - hardcode_shlibpath_var=no - ;; - - sysv4) - case $host_vendor in - sni) - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_direct=yes # is this really true??? - ;; - siemens) - ## LD is ld it makes a PLAMLIB - ## CC just makes a GrossModule. - archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags' - reload_cmds='$CC -r -o $output$reload_objs' - hardcode_direct=no - ;; - motorola) - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_direct=no #Motorola manual says yes, but my tests say they lie - ;; - esac - runpath_var='LD_RUN_PATH' - hardcode_shlibpath_var=no - ;; - - sysv4.3*) - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_shlibpath_var=no - export_dynamic_flag_spec='-Bexport' - ;; - - sysv4*MP*) - if test -d /usr/nec; then - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_shlibpath_var=no - runpath_var=LD_RUN_PATH - hardcode_runpath_var=yes - ld_shlibs=yes - fi - ;; - - sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*) - no_undefined_flag='$wl-z,text' - archive_cmds_need_lc=no - hardcode_shlibpath_var=no - runpath_var='LD_RUN_PATH' - - if test yes = "$GCC"; then - archive_cmds='$CC -shared $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - archive_expsym_cmds='$CC -shared $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - else - archive_cmds='$CC -G $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - archive_expsym_cmds='$CC -G $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - fi - ;; - - sysv5* | sco3.2v5* | sco5v6*) - # Note: We CANNOT use -z defs as we might desire, because we do not - # link with -lc, and that would cause any symbols used from libc to - # always be unresolved, which means just about no library would - # ever link correctly. If we're not using GNU ld we use -z text - # though, which does catch some bad symbols but isn't as heavy-handed - # as -z defs. - no_undefined_flag='$wl-z,text' - allow_undefined_flag='$wl-z,nodefs' - archive_cmds_need_lc=no - hardcode_shlibpath_var=no - hardcode_libdir_flag_spec='$wl-R,$libdir' - hardcode_libdir_separator=':' - link_all_deplibs=yes - export_dynamic_flag_spec='$wl-Bexport' - runpath_var='LD_RUN_PATH' - - if test yes = "$GCC"; then - archive_cmds='$CC -shared $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - archive_expsym_cmds='$CC -shared $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - else - archive_cmds='$CC -G $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - archive_expsym_cmds='$CC -G $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - fi - ;; - - uts4*) - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_libdir_flag_spec='-L$libdir' - hardcode_shlibpath_var=no - ;; - - *) - ld_shlibs=no - ;; - esac - - if test sni = "$host_vendor"; then - case $host in - sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) - export_dynamic_flag_spec='$wl-Blargedynsym' - ;; - esac - fi - fi - -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ld_shlibs" >&5 -$as_echo "$ld_shlibs" >&6; } -test no = "$ld_shlibs" && can_build_shared=no - -with_gnu_ld=$with_gnu_ld - - - - - - - - - - - - - - - -# -# Do we need to explicitly link libc? -# -case "x$archive_cmds_need_lc" in -x|xyes) - # Assume -lc should be added - archive_cmds_need_lc=yes - - if test yes,yes = "$GCC,$enable_shared"; then - case $archive_cmds in - *'~'*) - # FIXME: we may have to deal with multi-command sequences. - ;; - '$CC '*) - # Test whether the compiler implicitly links with -lc since on some - # systems, -lgcc has to come before -lc. If gcc already passes -lc - # to ld, don't add -lc before -lgcc. - { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether -lc should be explicitly linked in" >&5 -$as_echo_n "checking whether -lc should be explicitly linked in... " >&6; } -if ${lt_cv_archive_cmds_need_lc+:} false; then : - $as_echo_n "(cached) " >&6 -else - $RM conftest* - echo "$lt_simple_compile_test_code" > conftest.$ac_ext - - if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } 2>conftest.err; then - soname=conftest - lib=conftest - libobjs=conftest.$ac_objext - deplibs= - wl=$lt_prog_compiler_wl - pic_flag=$lt_prog_compiler_pic - compiler_flags=-v - linker_flags=-v - verstring= - output_objdir=. - libname=conftest - lt_save_allow_undefined_flag=$allow_undefined_flag - allow_undefined_flag= - if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1\""; } >&5 - (eval $archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1) 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } - then - lt_cv_archive_cmds_need_lc=no - else - lt_cv_archive_cmds_need_lc=yes - fi - allow_undefined_flag=$lt_save_allow_undefined_flag - else - cat conftest.err 1>&5 - fi - $RM conftest* - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_archive_cmds_need_lc" >&5 -$as_echo "$lt_cv_archive_cmds_need_lc" >&6; } - archive_cmds_need_lc=$lt_cv_archive_cmds_need_lc - ;; - esac - fi - ;; -esac - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking dynamic linker characteristics" >&5 -$as_echo_n "checking dynamic linker characteristics... " >&6; } - -if test yes = "$GCC"; then - case $host_os in - darwin*) lt_awk_arg='/^libraries:/,/LR/' ;; - *) lt_awk_arg='/^libraries:/' ;; - esac - case $host_os in - mingw* | cegcc*) lt_sed_strip_eq='s|=\([A-Za-z]:\)|\1|g' ;; - *) lt_sed_strip_eq='s|=/|/|g' ;; - esac - lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e $lt_sed_strip_eq` - case $lt_search_path_spec in - *\;*) - # if the path contains ";" then we assume it to be the separator - # otherwise default to the standard path separator (i.e. ":") - it is - # assumed that no part of a normal pathname contains ";" but that should - # okay in the real world where ";" in dirpaths is itself problematic. - lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED 's/;/ /g'` - ;; - *) - lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED "s/$PATH_SEPARATOR/ /g"` - ;; - esac - # Ok, now we have the path, separated by spaces, we can step through it - # and add multilib dir if necessary... - lt_tmp_lt_search_path_spec= - lt_multi_os_dir=/`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null` - # ...but if some path component already ends with the multilib dir we assume - # that all is fine and trust -print-search-dirs as is (GCC 4.2? or newer). - case "$lt_multi_os_dir; $lt_search_path_spec " in - "/; "* | "/.; "* | "/./; "* | *"$lt_multi_os_dir "* | *"$lt_multi_os_dir/ "*) - lt_multi_os_dir= - ;; - esac - for lt_sys_path in $lt_search_path_spec; do - if test -d "$lt_sys_path$lt_multi_os_dir"; then - lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path$lt_multi_os_dir" - elif test -n "$lt_multi_os_dir"; then - test -d "$lt_sys_path" && \ - lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path" - fi - done - lt_search_path_spec=`$ECHO "$lt_tmp_lt_search_path_spec" | awk ' -BEGIN {RS = " "; FS = "/|\n";} { - lt_foo = ""; - lt_count = 0; - for (lt_i = NF; lt_i > 0; lt_i--) { - if ($lt_i != "" && $lt_i != ".") { - if ($lt_i == "..") { - lt_count++; - } else { - if (lt_count == 0) { - lt_foo = "/" $lt_i lt_foo; - } else { - lt_count--; - } - } - } - } - if (lt_foo != "") { lt_freq[lt_foo]++; } - if (lt_freq[lt_foo] == 1) { print lt_foo; } -}'` - # AWK program above erroneously prepends '/' to C:/dos/paths - # for these hosts. - case $host_os in - mingw* | cegcc*) lt_search_path_spec=`$ECHO "$lt_search_path_spec" |\ - $SED 's|/\([A-Za-z]:\)|\1|g'` ;; - esac - sys_lib_search_path_spec=`$ECHO "$lt_search_path_spec" | $lt_NL2SP` -else - sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" -fi -library_names_spec= -libname_spec='lib$name' -soname_spec= -shrext_cmds=.so -postinstall_cmds= -postuninstall_cmds= -finish_cmds= -finish_eval= -shlibpath_var= -shlibpath_overrides_runpath=unknown -version_type=none -dynamic_linker="$host_os ld.so" -sys_lib_dlsearch_path_spec="/lib /usr/lib" -need_lib_prefix=unknown -hardcode_into_libs=no - -# when you set need_version to no, make sure it does not cause -set_version -# flags to be left without arguments -need_version=unknown - - - -case $host_os in -aix3*) - version_type=linux # correct to gnu/linux during the next big refactor - library_names_spec='$libname$release$shared_ext$versuffix $libname.a' - shlibpath_var=LIBPATH - - # AIX 3 has no versioning support, so we append a major version to the name. - soname_spec='$libname$release$shared_ext$major' - ;; - -aix[4-9]*) - version_type=linux # correct to gnu/linux during the next big refactor - need_lib_prefix=no - need_version=no - hardcode_into_libs=yes - if test ia64 = "$host_cpu"; then - # AIX 5 supports IA64 - library_names_spec='$libname$release$shared_ext$major $libname$release$shared_ext$versuffix $libname$shared_ext' - shlibpath_var=LD_LIBRARY_PATH - else - # With GCC up to 2.95.x, collect2 would create an import file - # for dependence libraries. The import file would start with - # the line '#! .'. This would cause the generated library to - # depend on '.', always an invalid library. This was fixed in - # development snapshots of GCC prior to 3.0. - case $host_os in - aix4 | aix4.[01] | aix4.[01].*) - if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' - echo ' yes ' - echo '#endif'; } | $CC -E - | $GREP yes > /dev/null; then - : - else - can_build_shared=no - fi - ;; - esac - # Using Import Files as archive members, it is possible to support - # filename-based versioning of shared library archives on AIX. While - # this would work for both with and without runtime linking, it will - # prevent static linking of such archives. So we do filename-based - # shared library versioning with .so extension only, which is used - # when both runtime linking and shared linking is enabled. - # Unfortunately, runtime linking may impact performance, so we do - # not want this to be the default eventually. Also, we use the - # versioned .so libs for executables only if there is the -brtl - # linker flag in LDFLAGS as well, or --with-aix-soname=svr4 only. - # To allow for filename-based versioning support, we need to create - # libNAME.so.V as an archive file, containing: - # *) an Import File, referring to the versioned filename of the - # archive as well as the shared archive member, telling the - # bitwidth (32 or 64) of that shared object, and providing the - # list of exported symbols of that shared object, eventually - # decorated with the 'weak' keyword - # *) the shared object with the F_LOADONLY flag set, to really avoid - # it being seen by the linker. - # At run time we better use the real file rather than another symlink, - # but for link time we create the symlink libNAME.so -> libNAME.so.V - - case $with_aix_soname,$aix_use_runtimelinking in - # AIX (on Power*) has no versioning support, so currently we cannot hardcode correct - # soname into executable. Probably we can add versioning support to - # collect2, so additional links can be useful in future. - aix,yes) # traditional libtool - dynamic_linker='AIX unversionable lib.so' - # If using run time linking (on AIX 4.2 or later) use lib.so - # instead of lib.a to let people know that these are not - # typical AIX shared libraries. - library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' - ;; - aix,no) # traditional AIX only - dynamic_linker='AIX lib.a(lib.so.V)' - # We preserve .a as extension for shared libraries through AIX4.2 - # and later when we are not doing run time linking. - library_names_spec='$libname$release.a $libname.a' - soname_spec='$libname$release$shared_ext$major' - ;; - svr4,*) # full svr4 only - dynamic_linker="AIX lib.so.V($shared_archive_member_spec.o)" - library_names_spec='$libname$release$shared_ext$major $libname$shared_ext' - # We do not specify a path in Import Files, so LIBPATH fires. - shlibpath_overrides_runpath=yes - ;; - *,yes) # both, prefer svr4 - dynamic_linker="AIX lib.so.V($shared_archive_member_spec.o), lib.a(lib.so.V)" - library_names_spec='$libname$release$shared_ext$major $libname$shared_ext' - # unpreferred sharedlib libNAME.a needs extra handling - postinstall_cmds='test -n "$linkname" || linkname="$realname"~func_stripname "" ".so" "$linkname"~$install_shared_prog "$dir/$func_stripname_result.$libext" "$destdir/$func_stripname_result.$libext"~test -z "$tstripme" || test -z "$striplib" || $striplib "$destdir/$func_stripname_result.$libext"' - postuninstall_cmds='for n in $library_names $old_library; do :; done~func_stripname "" ".so" "$n"~test "$func_stripname_result" = "$n" || func_append rmfiles " $odir/$func_stripname_result.$libext"' - # We do not specify a path in Import Files, so LIBPATH fires. - shlibpath_overrides_runpath=yes - ;; - *,no) # both, prefer aix - dynamic_linker="AIX lib.a(lib.so.V), lib.so.V($shared_archive_member_spec.o)" - library_names_spec='$libname$release.a $libname.a' - soname_spec='$libname$release$shared_ext$major' - # unpreferred sharedlib libNAME.so.V and symlink libNAME.so need extra handling - postinstall_cmds='test -z "$dlname" || $install_shared_prog $dir/$dlname $destdir/$dlname~test -z "$tstripme" || test -z "$striplib" || $striplib $destdir/$dlname~test -n "$linkname" || linkname=$realname~func_stripname "" ".a" "$linkname"~(cd "$destdir" && $LN_S -f $dlname $func_stripname_result.so)' - postuninstall_cmds='test -z "$dlname" || func_append rmfiles " $odir/$dlname"~for n in $old_library $library_names; do :; done~func_stripname "" ".a" "$n"~func_append rmfiles " $odir/$func_stripname_result.so"' - ;; - esac - shlibpath_var=LIBPATH - fi - ;; - -amigaos*) - case $host_cpu in - powerpc) - # Since July 2007 AmigaOS4 officially supports .so libraries. - # When compiling the executable, add -use-dynld -Lsobjs: to the compileline. - library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' - ;; - m68k) - library_names_spec='$libname.ixlibrary $libname.a' - # Create ${libname}_ixlibrary.a entries in /sys/libs. - finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' - ;; - esac - ;; - -beos*) - library_names_spec='$libname$shared_ext' - dynamic_linker="$host_os ld.so" - shlibpath_var=LIBRARY_PATH - ;; - -bsdi[45]*) - version_type=linux # correct to gnu/linux during the next big refactor - need_version=no - library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' - soname_spec='$libname$release$shared_ext$major' - finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' - shlibpath_var=LD_LIBRARY_PATH - sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" - sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" - # the default ld.so.conf also contains /usr/contrib/lib and - # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow - # libtool to hard-code these into programs - ;; - -cygwin* | mingw* | pw32* | cegcc*) - version_type=windows - shrext_cmds=.dll - need_version=no - need_lib_prefix=no - - case $GCC,$cc_basename in - yes,*) - # gcc - library_names_spec='$libname.dll.a' - # DLL is installed to $(libdir)/../bin by postinstall_cmds - postinstall_cmds='base_file=`basename \$file`~ - dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; echo \$dlname'\''`~ - dldir=$destdir/`dirname \$dlpath`~ - test -d \$dldir || mkdir -p \$dldir~ - $install_prog $dir/$dlname \$dldir/$dlname~ - chmod a+x \$dldir/$dlname~ - if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then - eval '\''$striplib \$dldir/$dlname'\'' || exit \$?; - fi' - postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ - dlpath=$dir/\$dldll~ - $RM \$dlpath' - shlibpath_overrides_runpath=yes - - case $host_os in - cygwin*) - # Cygwin DLLs use 'cyg' prefix rather than 'lib' - soname_spec='`echo $libname | sed -e 's/^lib/cyg/'``echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext' - - sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/lib/w32api" - ;; - mingw* | cegcc*) - # MinGW DLLs use traditional 'lib' prefix - soname_spec='$libname`echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext' - ;; - pw32*) - # pw32 DLLs use 'pw' prefix rather than 'lib' - library_names_spec='`echo $libname | sed -e 's/^lib/pw/'``echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext' - ;; - esac - dynamic_linker='Win32 ld.exe' - ;; - - *,cl*) - # Native MSVC - libname_spec='$name' - soname_spec='$libname`echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext' - library_names_spec='$libname.dll.lib' - - case $build_os in - mingw*) - sys_lib_search_path_spec= - lt_save_ifs=$IFS - IFS=';' - for lt_path in $LIB - do - IFS=$lt_save_ifs - # Let DOS variable expansion print the short 8.3 style file name. - lt_path=`cd "$lt_path" 2>/dev/null && cmd //C "for %i in (".") do @echo %~si"` - sys_lib_search_path_spec="$sys_lib_search_path_spec $lt_path" - done - IFS=$lt_save_ifs - # Convert to MSYS style. - sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | sed -e 's|\\\\|/|g' -e 's| \\([a-zA-Z]\\):| /\\1|g' -e 's|^ ||'` - ;; - cygwin*) - # Convert to unix form, then to dos form, then back to unix form - # but this time dos style (no spaces!) so that the unix form looks - # like /cygdrive/c/PROGRA~1:/cygdr... - sys_lib_search_path_spec=`cygpath --path --unix "$LIB"` - sys_lib_search_path_spec=`cygpath --path --dos "$sys_lib_search_path_spec" 2>/dev/null` - sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` - ;; - *) - sys_lib_search_path_spec=$LIB - if $ECHO "$sys_lib_search_path_spec" | $GREP ';[c-zC-Z]:/' >/dev/null; then - # It is most probably a Windows format PATH. - sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` - else - sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` - fi - # FIXME: find the short name or the path components, as spaces are - # common. (e.g. "Program Files" -> "PROGRA~1") - ;; - esac - - # DLL is installed to $(libdir)/../bin by postinstall_cmds - postinstall_cmds='base_file=`basename \$file`~ - dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; echo \$dlname'\''`~ - dldir=$destdir/`dirname \$dlpath`~ - test -d \$dldir || mkdir -p \$dldir~ - $install_prog $dir/$dlname \$dldir/$dlname' - postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ - dlpath=$dir/\$dldll~ - $RM \$dlpath' - shlibpath_overrides_runpath=yes - dynamic_linker='Win32 link.exe' - ;; - - *) - # Assume MSVC wrapper - library_names_spec='$libname`echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext $libname.lib' - dynamic_linker='Win32 ld.exe' - ;; - esac - # FIXME: first we should search . and the directory the executable is in - shlibpath_var=PATH - ;; - -darwin* | rhapsody*) - dynamic_linker="$host_os dyld" - version_type=darwin - need_lib_prefix=no - need_version=no - library_names_spec='$libname$release$major$shared_ext $libname$shared_ext' - soname_spec='$libname$release$major$shared_ext' - shlibpath_overrides_runpath=yes - shlibpath_var=DYLD_LIBRARY_PATH - shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`' - - sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib" - sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib' - ;; - -dgux*) - version_type=linux # correct to gnu/linux during the next big refactor - need_lib_prefix=no - need_version=no - library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' - soname_spec='$libname$release$shared_ext$major' - shlibpath_var=LD_LIBRARY_PATH - ;; - -freebsd* | dragonfly*) - # DragonFly does not have aout. When/if they implement a new - # versioning mechanism, adjust this. - if test -x /usr/bin/objformat; then - objformat=`/usr/bin/objformat` - else - case $host_os in - freebsd[23].*) objformat=aout ;; - *) objformat=elf ;; - esac - fi - version_type=freebsd-$objformat - case $version_type in - freebsd-elf*) - library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' - soname_spec='$libname$release$shared_ext$major' - need_version=no - need_lib_prefix=no - ;; - freebsd-*) - library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix' - need_version=yes - ;; - esac - shlibpath_var=LD_LIBRARY_PATH - case $host_os in - freebsd2.*) - shlibpath_overrides_runpath=yes - ;; - freebsd3.[01]* | freebsdelf3.[01]*) - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - ;; - freebsd3.[2-9]* | freebsdelf3.[2-9]* | \ - freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1) - shlibpath_overrides_runpath=no - hardcode_into_libs=yes - ;; - *) # from 4.6 on, and DragonFly - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - ;; - esac - ;; - -haiku*) - version_type=linux # correct to gnu/linux during the next big refactor - need_lib_prefix=no - need_version=no - dynamic_linker="$host_os runtime_loader" - library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' - soname_spec='$libname$release$shared_ext$major' - shlibpath_var=LIBRARY_PATH - shlibpath_overrides_runpath=no - sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib' - hardcode_into_libs=yes - ;; - -hpux9* | hpux10* | hpux11*) - # Give a soname corresponding to the major version so that dld.sl refuses to - # link against other versions. - version_type=sunos - need_lib_prefix=no - need_version=no - case $host_cpu in - ia64*) - shrext_cmds='.so' - hardcode_into_libs=yes - dynamic_linker="$host_os dld.so" - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. - library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' - soname_spec='$libname$release$shared_ext$major' - if test 32 = "$HPUX_IA64_MODE"; then - sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib" - sys_lib_dlsearch_path_spec=/usr/lib/hpux32 - else - sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64" - sys_lib_dlsearch_path_spec=/usr/lib/hpux64 - fi - ;; - hppa*64*) - shrext_cmds='.sl' - hardcode_into_libs=yes - dynamic_linker="$host_os dld.sl" - shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH - shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. - library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' - soname_spec='$libname$release$shared_ext$major' - sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64" - sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec - ;; - *) - shrext_cmds='.sl' - dynamic_linker="$host_os dld.sl" - shlibpath_var=SHLIB_PATH - shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH - library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' - soname_spec='$libname$release$shared_ext$major' - ;; - esac - # HP-UX runs *really* slowly unless shared libraries are mode 555, ... - postinstall_cmds='chmod 555 $lib' - # or fails outright, so override atomically: - install_override_mode=555 - ;; - -interix[3-9]*) - version_type=linux # correct to gnu/linux during the next big refactor - need_lib_prefix=no - need_version=no - library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' - soname_spec='$libname$release$shared_ext$major' - dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=no - hardcode_into_libs=yes - ;; - -irix5* | irix6* | nonstopux*) - case $host_os in - nonstopux*) version_type=nonstopux ;; - *) - if test yes = "$lt_cv_prog_gnu_ld"; then - version_type=linux # correct to gnu/linux during the next big refactor - else - version_type=irix - fi ;; - esac - need_lib_prefix=no - need_version=no - soname_spec='$libname$release$shared_ext$major' - library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$release$shared_ext $libname$shared_ext' - case $host_os in - irix5* | nonstopux*) - libsuff= shlibsuff= - ;; - *) - case $LD in # libtool.m4 will add one of these switches to LD - *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") - libsuff= shlibsuff= libmagic=32-bit;; - *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") - libsuff=32 shlibsuff=N32 libmagic=N32;; - *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") - libsuff=64 shlibsuff=64 libmagic=64-bit;; - *) libsuff= shlibsuff= libmagic=never-match;; - esac - ;; - esac - shlibpath_var=LD_LIBRARY${shlibsuff}_PATH - shlibpath_overrides_runpath=no - sys_lib_search_path_spec="/usr/lib$libsuff /lib$libsuff /usr/local/lib$libsuff" - sys_lib_dlsearch_path_spec="/usr/lib$libsuff /lib$libsuff" - hardcode_into_libs=yes - ;; - -# No shared lib support for Linux oldld, aout, or coff. -linux*oldld* | linux*aout* | linux*coff*) - dynamic_linker=no - ;; - -linux*android*) - version_type=none # Android doesn't support versioned libraries. - need_lib_prefix=no - need_version=no - library_names_spec='$libname$release$shared_ext' - soname_spec='$libname$release$shared_ext' - finish_cmds= - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - - # This implies no fast_install, which is unacceptable. - # Some rework will be needed to allow for fast_install - # before this can be enabled. - hardcode_into_libs=yes - - dynamic_linker='Android linker' - # Don't embed -rpath directories since the linker doesn't support them. - hardcode_libdir_flag_spec='-L$libdir' - ;; - -# This must be glibc/ELF. -linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*) - version_type=linux # correct to gnu/linux during the next big refactor - need_lib_prefix=no - need_version=no - library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' - soname_spec='$libname$release$shared_ext$major' - finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=no - - # Some binutils ld are patched to set DT_RUNPATH - if ${lt_cv_shlibpath_overrides_runpath+:} false; then : - $as_echo_n "(cached) " >&6 -else - lt_cv_shlibpath_overrides_runpath=no - save_LDFLAGS=$LDFLAGS - save_libdir=$libdir - eval "libdir=/foo; wl=\"$lt_prog_compiler_wl\"; \ - LDFLAGS=\"\$LDFLAGS $hardcode_libdir_flag_spec\"" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - if ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null; then : - lt_cv_shlibpath_overrides_runpath=yes -fi -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext - LDFLAGS=$save_LDFLAGS - libdir=$save_libdir - -fi - - shlibpath_overrides_runpath=$lt_cv_shlibpath_overrides_runpath - - # This implies no fast_install, which is unacceptable. - # Some rework will be needed to allow for fast_install - # before this can be enabled. - hardcode_into_libs=yes - - # Ideally, we could use ldconfig to report *all* directores which are - # searched for libraries, however this is still not possible. Aside from not - # being certain /sbin/ldconfig is available, command - # 'ldconfig -N -X -v | grep ^/' on 64bit Fedora does not report /usr/lib64, - # even though it is searched at run-time. Try to do the best guess by - # appending ld.so.conf contents (and includes) to the search path. - if test -f /etc/ld.so.conf; then - lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '` - sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra" - fi - - # We used to test for /lib/ld.so.1 and disable shared libraries on - # powerpc, because MkLinux only supported shared libraries with the - # GNU dynamic linker. Since this was broken with cross compilers, - # most powerpc-linux boxes support dynamic linking these days and - # people can always --disable-shared, the test was removed, and we - # assume the GNU/Linux dynamic linker is in use. - dynamic_linker='GNU/Linux ld.so' - ;; - -netbsd*) - version_type=sunos - need_lib_prefix=no - need_version=no - if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then - library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix' - finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' - dynamic_linker='NetBSD (a.out) ld.so' - else - library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' - soname_spec='$libname$release$shared_ext$major' - dynamic_linker='NetBSD ld.elf_so' - fi - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - ;; - -newsos6) - version_type=linux # correct to gnu/linux during the next big refactor - library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - ;; - -*nto* | *qnx*) - version_type=qnx - need_lib_prefix=no - need_version=no - library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' - soname_spec='$libname$release$shared_ext$major' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=no - hardcode_into_libs=yes - dynamic_linker='ldqnx.so' - ;; - -openbsd* | bitrig*) - version_type=sunos - sys_lib_dlsearch_path_spec=/usr/lib - need_lib_prefix=no - if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`"; then - need_version=no - else - need_version=yes - fi - library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix' - finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - ;; - -os2*) - libname_spec='$name' - version_type=windows - shrext_cmds=.dll - need_version=no - need_lib_prefix=no - # OS/2 can only load a DLL with a base name of 8 characters or less. - soname_spec='`test -n "$os2dllname" && libname="$os2dllname"; - v=$($ECHO $release$versuffix | tr -d .-); - n=$($ECHO $libname | cut -b -$((8 - ${#v})) | tr . _); - $ECHO $n$v`$shared_ext' - library_names_spec='${libname}_dll.$libext' - dynamic_linker='OS/2 ld.exe' - shlibpath_var=BEGINLIBPATH - sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" - sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec - postinstall_cmds='base_file=`basename \$file`~ - dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; $ECHO \$dlname'\''`~ - dldir=$destdir/`dirname \$dlpath`~ - test -d \$dldir || mkdir -p \$dldir~ - $install_prog $dir/$dlname \$dldir/$dlname~ - chmod a+x \$dldir/$dlname~ - if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then - eval '\''$striplib \$dldir/$dlname'\'' || exit \$?; - fi' - postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; $ECHO \$dlname'\''`~ - dlpath=$dir/\$dldll~ - $RM \$dlpath' - ;; - -osf3* | osf4* | osf5*) - version_type=osf - need_lib_prefix=no - need_version=no - soname_spec='$libname$release$shared_ext$major' - library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' - shlibpath_var=LD_LIBRARY_PATH - sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" - sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec - ;; - -rdos*) - dynamic_linker=no - ;; - -solaris*) - version_type=linux # correct to gnu/linux during the next big refactor - need_lib_prefix=no - need_version=no - library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' - soname_spec='$libname$release$shared_ext$major' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - # ldd complains unless libraries are executable - postinstall_cmds='chmod +x $lib' - ;; - -sunos4*) - version_type=sunos - library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix' - finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - if test yes = "$with_gnu_ld"; then - need_lib_prefix=no - fi - need_version=yes - ;; - -sysv4 | sysv4.3*) - version_type=linux # correct to gnu/linux during the next big refactor - library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' - soname_spec='$libname$release$shared_ext$major' - shlibpath_var=LD_LIBRARY_PATH - case $host_vendor in - sni) - shlibpath_overrides_runpath=no - need_lib_prefix=no - runpath_var=LD_RUN_PATH - ;; - siemens) - need_lib_prefix=no - ;; - motorola) - need_lib_prefix=no - need_version=no - shlibpath_overrides_runpath=no - sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' - ;; - esac - ;; - -sysv4*MP*) - if test -d /usr/nec; then - version_type=linux # correct to gnu/linux during the next big refactor - library_names_spec='$libname$shared_ext.$versuffix $libname$shared_ext.$major $libname$shared_ext' - soname_spec='$libname$shared_ext.$major' - shlibpath_var=LD_LIBRARY_PATH - fi - ;; - -sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) - version_type=sco - need_lib_prefix=no - need_version=no - library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext $libname$shared_ext' - soname_spec='$libname$release$shared_ext$major' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - if test yes = "$with_gnu_ld"; then - sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib' - else - sys_lib_search_path_spec='/usr/ccs/lib /usr/lib' - case $host_os in - sco3.2v5*) - sys_lib_search_path_spec="$sys_lib_search_path_spec /lib" - ;; - esac - fi - sys_lib_dlsearch_path_spec='/usr/lib' - ;; - -tpf*) - # TPF is a cross-target only. Preferred cross-host = GNU/Linux. - version_type=linux # correct to gnu/linux during the next big refactor - need_lib_prefix=no - need_version=no - library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=no - hardcode_into_libs=yes - ;; - -uts4*) - version_type=linux # correct to gnu/linux during the next big refactor - library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' - soname_spec='$libname$release$shared_ext$major' - shlibpath_var=LD_LIBRARY_PATH - ;; - -*) - dynamic_linker=no - ;; -esac -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $dynamic_linker" >&5 -$as_echo "$dynamic_linker" >&6; } -test no = "$dynamic_linker" && can_build_shared=no - -variables_saved_for_relink="PATH $shlibpath_var $runpath_var" -if test yes = "$GCC"; then - variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" -fi - -if test set = "${lt_cv_sys_lib_search_path_spec+set}"; then - sys_lib_search_path_spec=$lt_cv_sys_lib_search_path_spec -fi - -if test set = "${lt_cv_sys_lib_dlsearch_path_spec+set}"; then - sys_lib_dlsearch_path_spec=$lt_cv_sys_lib_dlsearch_path_spec -fi - -# remember unaugmented sys_lib_dlsearch_path content for libtool script decls... -configure_time_dlsearch_path=$sys_lib_dlsearch_path_spec - -# ... but it needs LT_SYS_LIBRARY_PATH munging for other configure-time code -func_munge_path_list sys_lib_dlsearch_path_spec "$LT_SYS_LIBRARY_PATH" - -# to be used as default LT_SYS_LIBRARY_PATH value in generated libtool -configure_time_lt_sys_library_path=$LT_SYS_LIBRARY_PATH - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to hardcode library paths into programs" >&5 -$as_echo_n "checking how to hardcode library paths into programs... " >&6; } -hardcode_action= -if test -n "$hardcode_libdir_flag_spec" || - test -n "$runpath_var" || - test yes = "$hardcode_automatic"; then - - # We can hardcode non-existent directories. - if test no != "$hardcode_direct" && - # If the only mechanism to avoid hardcoding is shlibpath_var, we - # have to relink, otherwise we might link with an installed library - # when we should be linking with a yet-to-be-installed one - ## test no != "$_LT_TAGVAR(hardcode_shlibpath_var, )" && - test no != "$hardcode_minus_L"; then - # Linking always hardcodes the temporary library directory. - hardcode_action=relink - else - # We can link without hardcoding, and we can hardcode nonexisting dirs. - hardcode_action=immediate - fi -else - # We cannot hardcode anything, or else we can only hardcode existing - # directories. - hardcode_action=unsupported -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $hardcode_action" >&5 -$as_echo "$hardcode_action" >&6; } - -if test relink = "$hardcode_action" || - test yes = "$inherit_rpath"; then - # Fast installation is not supported - enable_fast_install=no -elif test yes = "$shlibpath_overrides_runpath" || - test no = "$enable_shared"; then - # Fast installation is not necessary - enable_fast_install=needless -fi - - - - - - - if test yes != "$enable_dlopen"; then - enable_dlopen=unknown - enable_dlopen_self=unknown - enable_dlopen_self_static=unknown -else - lt_cv_dlopen=no - lt_cv_dlopen_libs= - - case $host_os in - beos*) - lt_cv_dlopen=load_add_on - lt_cv_dlopen_libs= - lt_cv_dlopen_self=yes - ;; - - mingw* | pw32* | cegcc*) - lt_cv_dlopen=LoadLibrary - lt_cv_dlopen_libs= - ;; - - cygwin*) - lt_cv_dlopen=dlopen - lt_cv_dlopen_libs= - ;; - - darwin*) - # if libdl is installed we need to link against it - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5 -$as_echo_n "checking for dlopen in -ldl... " >&6; } -if ${ac_cv_lib_dl_dlopen+:} false; then : - $as_echo_n "(cached) " >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-ldl $LIBS" -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char dlopen (); -int -main () -{ -return dlopen (); - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - ac_cv_lib_dl_dlopen=yes -else - ac_cv_lib_dl_dlopen=no -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5 -$as_echo "$ac_cv_lib_dl_dlopen" >&6; } -if test "x$ac_cv_lib_dl_dlopen" = xyes; then : - lt_cv_dlopen=dlopen lt_cv_dlopen_libs=-ldl -else - - lt_cv_dlopen=dyld - lt_cv_dlopen_libs= - lt_cv_dlopen_self=yes - -fi - - ;; - - tpf*) - # Don't try to run any link tests for TPF. We know it's impossible - # because TPF is a cross-compiler, and we know how we open DSOs. - lt_cv_dlopen=dlopen - lt_cv_dlopen_libs= - lt_cv_dlopen_self=no - ;; - - *) - ac_fn_c_check_func "$LINENO" "shl_load" "ac_cv_func_shl_load" -if test "x$ac_cv_func_shl_load" = xyes; then : - lt_cv_dlopen=shl_load -else - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for shl_load in -ldld" >&5 -$as_echo_n "checking for shl_load in -ldld... " >&6; } -if ${ac_cv_lib_dld_shl_load+:} false; then : - $as_echo_n "(cached) " >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-ldld $LIBS" -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char shl_load (); -int -main () -{ -return shl_load (); - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - ac_cv_lib_dld_shl_load=yes -else - ac_cv_lib_dld_shl_load=no -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_shl_load" >&5 -$as_echo "$ac_cv_lib_dld_shl_load" >&6; } -if test "x$ac_cv_lib_dld_shl_load" = xyes; then : - lt_cv_dlopen=shl_load lt_cv_dlopen_libs=-ldld -else - ac_fn_c_check_func "$LINENO" "dlopen" "ac_cv_func_dlopen" -if test "x$ac_cv_func_dlopen" = xyes; then : - lt_cv_dlopen=dlopen -else - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5 -$as_echo_n "checking for dlopen in -ldl... " >&6; } -if ${ac_cv_lib_dl_dlopen+:} false; then : - $as_echo_n "(cached) " >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-ldl $LIBS" -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char dlopen (); -int -main () -{ -return dlopen (); - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - ac_cv_lib_dl_dlopen=yes -else - ac_cv_lib_dl_dlopen=no -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5 -$as_echo "$ac_cv_lib_dl_dlopen" >&6; } -if test "x$ac_cv_lib_dl_dlopen" = xyes; then : - lt_cv_dlopen=dlopen lt_cv_dlopen_libs=-ldl -else - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -lsvld" >&5 -$as_echo_n "checking for dlopen in -lsvld... " >&6; } -if ${ac_cv_lib_svld_dlopen+:} false; then : - $as_echo_n "(cached) " >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-lsvld $LIBS" -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char dlopen (); -int -main () -{ -return dlopen (); - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - ac_cv_lib_svld_dlopen=yes -else - ac_cv_lib_svld_dlopen=no -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_svld_dlopen" >&5 -$as_echo "$ac_cv_lib_svld_dlopen" >&6; } -if test "x$ac_cv_lib_svld_dlopen" = xyes; then : - lt_cv_dlopen=dlopen lt_cv_dlopen_libs=-lsvld -else - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dld_link in -ldld" >&5 -$as_echo_n "checking for dld_link in -ldld... " >&6; } -if ${ac_cv_lib_dld_dld_link+:} false; then : - $as_echo_n "(cached) " >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-ldld $LIBS" -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char dld_link (); -int -main () -{ -return dld_link (); - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - ac_cv_lib_dld_dld_link=yes -else - ac_cv_lib_dld_dld_link=no -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_dld_link" >&5 -$as_echo "$ac_cv_lib_dld_dld_link" >&6; } -if test "x$ac_cv_lib_dld_dld_link" = xyes; then : - lt_cv_dlopen=dld_link lt_cv_dlopen_libs=-ldld -fi - - -fi - - -fi - - -fi - - -fi - - -fi - - ;; - esac - - if test no = "$lt_cv_dlopen"; then - enable_dlopen=no - else - enable_dlopen=yes - fi - - case $lt_cv_dlopen in - dlopen) - save_CPPFLAGS=$CPPFLAGS - test yes = "$ac_cv_header_dlfcn_h" && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H" - - save_LDFLAGS=$LDFLAGS - wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\" - - save_LIBS=$LIBS - LIBS="$lt_cv_dlopen_libs $LIBS" - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether a program can dlopen itself" >&5 -$as_echo_n "checking whether a program can dlopen itself... " >&6; } -if ${lt_cv_dlopen_self+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test yes = "$cross_compiling"; then : - lt_cv_dlopen_self=cross -else - lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 - lt_status=$lt_dlunknown - cat > conftest.$ac_ext <<_LT_EOF -#line $LINENO "configure" -#include "confdefs.h" - -#if HAVE_DLFCN_H -#include -#endif - -#include - -#ifdef RTLD_GLOBAL -# define LT_DLGLOBAL RTLD_GLOBAL -#else -# ifdef DL_GLOBAL -# define LT_DLGLOBAL DL_GLOBAL -# else -# define LT_DLGLOBAL 0 -# endif -#endif - -/* We may have to define LT_DLLAZY_OR_NOW in the command line if we - find out it does not work in some platform. */ -#ifndef LT_DLLAZY_OR_NOW -# ifdef RTLD_LAZY -# define LT_DLLAZY_OR_NOW RTLD_LAZY -# else -# ifdef DL_LAZY -# define LT_DLLAZY_OR_NOW DL_LAZY -# else -# ifdef RTLD_NOW -# define LT_DLLAZY_OR_NOW RTLD_NOW -# else -# ifdef DL_NOW -# define LT_DLLAZY_OR_NOW DL_NOW -# else -# define LT_DLLAZY_OR_NOW 0 -# endif -# endif -# endif -# endif -#endif - -/* When -fvisibility=hidden is used, assume the code has been annotated - correspondingly for the symbols needed. */ -#if defined __GNUC__ && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3)) -int fnord () __attribute__((visibility("default"))); -#endif - -int fnord () { return 42; } -int main () -{ - void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); - int status = $lt_dlunknown; - - if (self) - { - if (dlsym (self,"fnord")) status = $lt_dlno_uscore; - else - { - if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; - else puts (dlerror ()); - } - /* dlclose (self); */ - } - else - puts (dlerror ()); - - return status; -} -_LT_EOF - if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5 - (eval $ac_link) 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } && test -s "conftest$ac_exeext" 2>/dev/null; then - (./conftest; exit; ) >&5 2>/dev/null - lt_status=$? - case x$lt_status in - x$lt_dlno_uscore) lt_cv_dlopen_self=yes ;; - x$lt_dlneed_uscore) lt_cv_dlopen_self=yes ;; - x$lt_dlunknown|x*) lt_cv_dlopen_self=no ;; - esac - else : - # compilation failed - lt_cv_dlopen_self=no - fi -fi -rm -fr conftest* - - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_dlopen_self" >&5 -$as_echo "$lt_cv_dlopen_self" >&6; } - - if test yes = "$lt_cv_dlopen_self"; then - wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\" - { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether a statically linked program can dlopen itself" >&5 -$as_echo_n "checking whether a statically linked program can dlopen itself... " >&6; } -if ${lt_cv_dlopen_self_static+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test yes = "$cross_compiling"; then : - lt_cv_dlopen_self_static=cross -else - lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 - lt_status=$lt_dlunknown - cat > conftest.$ac_ext <<_LT_EOF -#line $LINENO "configure" -#include "confdefs.h" - -#if HAVE_DLFCN_H -#include -#endif - -#include - -#ifdef RTLD_GLOBAL -# define LT_DLGLOBAL RTLD_GLOBAL -#else -# ifdef DL_GLOBAL -# define LT_DLGLOBAL DL_GLOBAL -# else -# define LT_DLGLOBAL 0 -# endif -#endif - -/* We may have to define LT_DLLAZY_OR_NOW in the command line if we - find out it does not work in some platform. */ -#ifndef LT_DLLAZY_OR_NOW -# ifdef RTLD_LAZY -# define LT_DLLAZY_OR_NOW RTLD_LAZY -# else -# ifdef DL_LAZY -# define LT_DLLAZY_OR_NOW DL_LAZY -# else -# ifdef RTLD_NOW -# define LT_DLLAZY_OR_NOW RTLD_NOW -# else -# ifdef DL_NOW -# define LT_DLLAZY_OR_NOW DL_NOW -# else -# define LT_DLLAZY_OR_NOW 0 -# endif -# endif -# endif -# endif -#endif - -/* When -fvisibility=hidden is used, assume the code has been annotated - correspondingly for the symbols needed. */ -#if defined __GNUC__ && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3)) -int fnord () __attribute__((visibility("default"))); -#endif - -int fnord () { return 42; } -int main () -{ - void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); - int status = $lt_dlunknown; - - if (self) - { - if (dlsym (self,"fnord")) status = $lt_dlno_uscore; - else - { - if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; - else puts (dlerror ()); - } - /* dlclose (self); */ - } - else - puts (dlerror ()); - - return status; -} -_LT_EOF - if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5 - (eval $ac_link) 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } && test -s "conftest$ac_exeext" 2>/dev/null; then - (./conftest; exit; ) >&5 2>/dev/null - lt_status=$? - case x$lt_status in - x$lt_dlno_uscore) lt_cv_dlopen_self_static=yes ;; - x$lt_dlneed_uscore) lt_cv_dlopen_self_static=yes ;; - x$lt_dlunknown|x*) lt_cv_dlopen_self_static=no ;; - esac - else : - # compilation failed - lt_cv_dlopen_self_static=no - fi -fi -rm -fr conftest* - - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_dlopen_self_static" >&5 -$as_echo "$lt_cv_dlopen_self_static" >&6; } - fi - - CPPFLAGS=$save_CPPFLAGS - LDFLAGS=$save_LDFLAGS - LIBS=$save_LIBS - ;; - esac - - case $lt_cv_dlopen_self in - yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;; - *) enable_dlopen_self=unknown ;; - esac - - case $lt_cv_dlopen_self_static in - yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;; - *) enable_dlopen_self_static=unknown ;; - esac -fi - - - - - - - - - - - - - - - - - -striplib= -old_striplib= -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether stripping libraries is possible" >&5 -$as_echo_n "checking whether stripping libraries is possible... " >&6; } -if test -n "$STRIP" && $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then - test -z "$old_striplib" && old_striplib="$STRIP --strip-debug" - test -z "$striplib" && striplib="$STRIP --strip-unneeded" - { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -$as_echo "yes" >&6; } -else -# FIXME - insert some real tests, host_os isn't really good enough - case $host_os in - darwin*) - if test -n "$STRIP"; then - striplib="$STRIP -x" - old_striplib="$STRIP -S" - { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -$as_echo "yes" >&6; } - else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } - fi - ;; - *) - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } - ;; - esac -fi - - - - - - - - - - - - - # Report what library types will actually be built - { $as_echo "$as_me:${as_lineno-$LINENO}: checking if libtool supports shared libraries" >&5 -$as_echo_n "checking if libtool supports shared libraries... " >&6; } - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $can_build_shared" >&5 -$as_echo "$can_build_shared" >&6; } - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build shared libraries" >&5 -$as_echo_n "checking whether to build shared libraries... " >&6; } - test no = "$can_build_shared" && enable_shared=no - - # On AIX, shared libraries and static libraries use the same namespace, and - # are all built from PIC. - case $host_os in - aix3*) - test yes = "$enable_shared" && enable_static=no - if test -n "$RANLIB"; then - archive_cmds="$archive_cmds~\$RANLIB \$lib" - postinstall_cmds='$RANLIB $lib' - fi - ;; - - aix[4-9]*) - if test ia64 != "$host_cpu"; then - case $enable_shared,$with_aix_soname,$aix_use_runtimelinking in - yes,aix,yes) ;; # shared object as lib.so file only - yes,svr4,*) ;; # shared object as lib.so archive member only - yes,*) enable_static=no ;; # shared object in lib.a archive as well - esac - fi - ;; - esac - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_shared" >&5 -$as_echo "$enable_shared" >&6; } - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build static libraries" >&5 -$as_echo_n "checking whether to build static libraries... " >&6; } - # Make sure either enable_shared or enable_static is yes. - test yes = "$enable_shared" || enable_static=yes - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_static" >&5 -$as_echo "$enable_static" >&6; } - - - - -fi -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - -CC=$lt_save_CC - - - - - - - - - - - - - - - - ac_config_commands="$ac_config_commands libtool" - - - - -# Only expand once: - - - - -# Some awks crash when confronted with pnglibconf.dfa, do a test run now -# to make sure this doesn't happen -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking that AWK works" >&5 -$as_echo_n "checking that AWK works... " >&6; } -if ${AWK} -f ${srcdir}/scripts/options.awk out="/dev/null" version=search\ - ${srcdir}/pngconf.h ${srcdir}/scripts/pnglibconf.dfa\ - ${srcdir}/pngusr.dfa 1>&2 -then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: ok" >&5 -$as_echo "ok" >&6; } -else - { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error 1 "failed -See \`config.log' for more details" "$LINENO" 5; } -fi - -# This is a remnant of the old cc -E validation, where it may have been -# necessary to use a different preprocessor for .dfn files -DFNCPP="$CPP" - - -# -Werror cannot be passed to GCC in CFLAGS because configure will fail (it -# checks the compiler with a program that generates a warning), add the -# following option to deal with this - -# Check whether --enable-werror was given. -if test "${enable_werror+set}" = set; then : - enableval=$enable_werror; test "$enable_werror" = "yes" && enable_werror="-Werror" - if test "$enable_werror" != "no"; then - sav_CFLAGS="$CFLAGS" - CFLAGS="$enable_werror $CFLAGS" - { $as_echo "$as_me:${as_lineno-$LINENO}: checking if the compiler allows $enable_werror" >&5 -$as_echo_n "checking if the compiler allows $enable_werror... " >&6; } - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - - int main(int argc, char **argv){ - return argv[argc-1][0]; - } -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -$as_echo "yes" >&6; } - PNG_COPTS="$PNG_COPTS $enable_werror" -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - CFLAGS="$sav_CFLAGS" - fi -fi - - -# For GCC 5 the default mode for C is -std=gnu11 instead of -std=gnu89 -# In pngpriv.h we request just the POSIX 1003.1 and C89 APIs by defining _POSIX_SOURCE to 1 -# This is incompatible with the new default mode, so we test for that and force the -# "-std=c89" compiler option: -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if we need to force back C standard to C89" >&5 -$as_echo_n "checking if we need to force back C standard to C89... " >&6; } -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - - #define _POSIX_SOURCE 1 - #include - -int -main () -{ - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -else - - if test "x$GCC" != "xyes"; then - as_fn_error $? "Forcing back to C89 is required but the flags are only known for GCC" "$LINENO" 5 - fi - { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -$as_echo "yes" >&6; } - CFLAGS="$CFLAGS -std=c89" - -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - -# Checks for header files. -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for ANSI C header files" >&5 -$as_echo_n "checking for ANSI C header files... " >&6; } -if ${ac_cv_header_stdc+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include -#include -#include -#include - -int -main () -{ - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - ac_cv_header_stdc=yes -else - ac_cv_header_stdc=no -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - -if test $ac_cv_header_stdc = yes; then - # SunOS 4.x string.h does not declare mem*, contrary to ANSI. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include - -_ACEOF -if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - $EGREP "memchr" >/dev/null 2>&1; then : - -else - ac_cv_header_stdc=no -fi -rm -f conftest* - -fi - -if test $ac_cv_header_stdc = yes; then - # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include - -_ACEOF -if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - $EGREP "free" >/dev/null 2>&1; then : - -else - ac_cv_header_stdc=no -fi -rm -f conftest* - -fi - -if test $ac_cv_header_stdc = yes; then - # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi. - if test "$cross_compiling" = yes; then : - : -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include -#include -#if ((' ' & 0x0FF) == 0x020) -# define ISLOWER(c) ('a' <= (c) && (c) <= 'z') -# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) -#else -# define ISLOWER(c) \ - (('a' <= (c) && (c) <= 'i') \ - || ('j' <= (c) && (c) <= 'r') \ - || ('s' <= (c) && (c) <= 'z')) -# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c)) -#endif - -#define XOR(e, f) (((e) && !(f)) || (!(e) && (f))) -int -main () -{ - int i; - for (i = 0; i < 256; i++) - if (XOR (islower (i), ISLOWER (i)) - || toupper (i) != TOUPPER (i)) - return 2; - return 0; -} -_ACEOF -if ac_fn_c_try_run "$LINENO"; then : - -else - ac_cv_header_stdc=no -fi -rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ - conftest.$ac_objext conftest.beam conftest.$ac_ext -fi - -fi -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_stdc" >&5 -$as_echo "$ac_cv_header_stdc" >&6; } -if test $ac_cv_header_stdc = yes; then - -$as_echo "#define STDC_HEADERS 1" >>confdefs.h - -fi - - -# Checks for typedefs, structures, and compiler characteristics. -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for an ANSI C-conforming const" >&5 -$as_echo_n "checking for an ANSI C-conforming const... " >&6; } -if ${ac_cv_c_const+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - -#ifndef __cplusplus - /* Ultrix mips cc rejects this sort of thing. */ - typedef int charset[2]; - const charset cs = { 0, 0 }; - /* SunOS 4.1.1 cc rejects this. */ - char const *const *pcpcc; - char **ppc; - /* NEC SVR4.0.2 mips cc rejects this. */ - struct point {int x, y;}; - static struct point const zero = {0,0}; - /* AIX XL C 1.02.0.0 rejects this. - It does not let you subtract one const X* pointer from another in - an arm of an if-expression whose if-part is not a constant - expression */ - const char *g = "string"; - pcpcc = &g + (g ? g-g : 0); - /* HPUX 7.0 cc rejects these. */ - ++pcpcc; - ppc = (char**) pcpcc; - pcpcc = (char const *const *) ppc; - { /* SCO 3.2v4 cc rejects this sort of thing. */ - char tx; - char *t = &tx; - char const *s = 0 ? (char *) 0 : (char const *) 0; - - *t++ = 0; - if (s) return 0; - } - { /* Someone thinks the Sun supposedly-ANSI compiler will reject this. */ - int x[] = {25, 17}; - const int *foo = &x[0]; - ++foo; - } - { /* Sun SC1.0 ANSI compiler rejects this -- but not the above. */ - typedef const int *iptr; - iptr p = 0; - ++p; - } - { /* AIX XL C 1.02.0.0 rejects this sort of thing, saying - "k.c", line 2.27: 1506-025 (S) Operand must be a modifiable lvalue. */ - struct s { int j; const int *ap[3]; } bx; - struct s *b = &bx; b->j = 5; - } - { /* ULTRIX-32 V3.1 (Rev 9) vcc rejects this */ - const int foo = 10; - if (!foo) return 0; - } - return !cs[0] && !zero.x; -#endif - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - ac_cv_c_const=yes -else - ac_cv_c_const=no -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_const" >&5 -$as_echo "$ac_cv_c_const" >&6; } -if test $ac_cv_c_const = no; then - -$as_echo "#define const /**/" >>confdefs.h - -fi - -ac_fn_c_check_type "$LINENO" "size_t" "ac_cv_type_size_t" "$ac_includes_default" -if test "x$ac_cv_type_size_t" = xyes; then : - -else - -cat >>confdefs.h <<_ACEOF -#define size_t unsigned int -_ACEOF - -fi - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether struct tm is in sys/time.h or time.h" >&5 -$as_echo_n "checking whether struct tm is in sys/time.h or time.h... " >&6; } -if ${ac_cv_struct_tm+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include -#include - -int -main () -{ -struct tm tm; - int *p = &tm.tm_sec; - return !p; - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - ac_cv_struct_tm=time.h -else - ac_cv_struct_tm=sys/time.h -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_struct_tm" >&5 -$as_echo "$ac_cv_struct_tm" >&6; } -if test $ac_cv_struct_tm = sys/time.h; then - -$as_echo "#define TM_IN_SYS_TIME 1" >>confdefs.h - -fi - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for C/C++ restrict keyword" >&5 -$as_echo_n "checking for C/C++ restrict keyword... " >&6; } -if ${ac_cv_c_restrict+:} false; then : - $as_echo_n "(cached) " >&6 -else - ac_cv_c_restrict=no - # The order here caters to the fact that C++ does not require restrict. - for ac_kw in __restrict __restrict__ _Restrict restrict; do - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -typedef int * int_ptr; - int foo (int_ptr $ac_kw ip) { - return ip[0]; - } -int -main () -{ -int s[1]; - int * $ac_kw t = s; - t[0] = 0; - return foo(t) - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - ac_cv_c_restrict=$ac_kw -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - test "$ac_cv_c_restrict" != no && break - done - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_restrict" >&5 -$as_echo "$ac_cv_c_restrict" >&6; } - - case $ac_cv_c_restrict in - restrict) ;; - no) $as_echo "#define restrict /**/" >>confdefs.h - ;; - *) cat >>confdefs.h <<_ACEOF -#define restrict $ac_cv_c_restrict -_ACEOF - ;; - esac - - -# Checks for library functions. -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for working strtod" >&5 -$as_echo_n "checking for working strtod... " >&6; } -if ${ac_cv_func_strtod+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test "$cross_compiling" = yes; then : - ac_cv_func_strtod=no -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -$ac_includes_default -#ifndef strtod -double strtod (); -#endif -int -main() -{ - { - /* Some versions of Linux strtod mis-parse strings with leading '+'. */ - char *string = " +69"; - char *term; - double value; - value = strtod (string, &term); - if (value != 69 || term != (string + 4)) - return 1; - } - - { - /* Under Solaris 2.4, strtod returns the wrong value for the - terminating character under some conditions. */ - char *string = "NaN"; - char *term; - strtod (string, &term); - if (term != string && *(term - 1) == 0) - return 1; - } - return 0; -} - -_ACEOF -if ac_fn_c_try_run "$LINENO"; then : - ac_cv_func_strtod=yes -else - ac_cv_func_strtod=no -fi -rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ - conftest.$ac_objext conftest.beam conftest.$ac_ext -fi - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_func_strtod" >&5 -$as_echo "$ac_cv_func_strtod" >&6; } -if test $ac_cv_func_strtod = no; then - case " $LIBOBJS " in - *" strtod.$ac_objext "* ) ;; - *) LIBOBJS="$LIBOBJS strtod.$ac_objext" - ;; -esac - -ac_fn_c_check_func "$LINENO" "pow" "ac_cv_func_pow" -if test "x$ac_cv_func_pow" = xyes; then : - -fi - -if test $ac_cv_func_pow = no; then - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for pow in -lm" >&5 -$as_echo_n "checking for pow in -lm... " >&6; } -if ${ac_cv_lib_m_pow+:} false; then : - $as_echo_n "(cached) " >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-lm $LIBS" -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char pow (); -int -main () -{ -return pow (); - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - ac_cv_lib_m_pow=yes -else - ac_cv_lib_m_pow=no -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_m_pow" >&5 -$as_echo "$ac_cv_lib_m_pow" >&6; } -if test "x$ac_cv_lib_m_pow" = xyes; then : - POW_LIB=-lm -else - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cannot find library containing definition of pow" >&5 -$as_echo "$as_me: WARNING: cannot find library containing definition of pow" >&2;} -fi - -fi - -fi - -for ac_func in pow -do : - ac_fn_c_check_func "$LINENO" "pow" "ac_cv_func_pow" -if test "x$ac_cv_func_pow" = xyes; then : - cat >>confdefs.h <<_ACEOF -#define HAVE_POW 1 -_ACEOF - -else - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for pow in -lm" >&5 -$as_echo_n "checking for pow in -lm... " >&6; } -if ${ac_cv_lib_m_pow+:} false; then : - $as_echo_n "(cached) " >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-lm $LIBS" -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char pow (); -int -main () -{ -return pow (); - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - ac_cv_lib_m_pow=yes -else - ac_cv_lib_m_pow=no -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_m_pow" >&5 -$as_echo "$ac_cv_lib_m_pow" >&6; } -if test "x$ac_cv_lib_m_pow" = xyes; then : - cat >>confdefs.h <<_ACEOF -#define HAVE_LIBM 1 -_ACEOF - - LIBS="-lm $LIBS" - -else - as_fn_error $? "cannot find pow" "$LINENO" 5 -fi - -fi -done - - -# Some later POSIX 1003.1 functions are required for test programs, failure here -# is soft (the corresponding test program is not built). -ac_fn_c_check_func "$LINENO" "clock_gettime" "ac_cv_func_clock_gettime" -if test "x$ac_cv_func_clock_gettime" = xyes; then : - -else - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: not building timepng" >&5 -$as_echo "$as_me: WARNING: not building timepng" >&2;} -fi - - if test "$ac_cv_func_clock_gettime" = "yes"; then - HAVE_CLOCK_GETTIME_TRUE= - HAVE_CLOCK_GETTIME_FALSE='#' -else - HAVE_CLOCK_GETTIME_TRUE='#' - HAVE_CLOCK_GETTIME_FALSE= -fi - - - -# Check whether --with-zlib-prefix was given. -if test "${with_zlib_prefix+set}" = set; then : - withval=$with_zlib_prefix; ZPREFIX=${withval} -else - ZPREFIX='z_' -fi - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for zlibVersion in -lz" >&5 -$as_echo_n "checking for zlibVersion in -lz... " >&6; } -if ${ac_cv_lib_z_zlibVersion+:} false; then : - $as_echo_n "(cached) " >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-lz $LIBS" -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char zlibVersion (); -int -main () -{ -return zlibVersion (); - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - ac_cv_lib_z_zlibVersion=yes -else - ac_cv_lib_z_zlibVersion=no -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_z_zlibVersion" >&5 -$as_echo "$ac_cv_lib_z_zlibVersion" >&6; } -if test "x$ac_cv_lib_z_zlibVersion" = xyes; then : - cat >>confdefs.h <<_ACEOF -#define HAVE_LIBZ 1 -_ACEOF - - LIBS="-lz $LIBS" - -else - as_ac_Lib=`$as_echo "ac_cv_lib_z_${ZPREFIX}zlibVersion" | $as_tr_sh` -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for ${ZPREFIX}zlibVersion in -lz" >&5 -$as_echo_n "checking for ${ZPREFIX}zlibVersion in -lz... " >&6; } -if eval \${$as_ac_Lib+:} false; then : - $as_echo_n "(cached) " >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-lz $LIBS" -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char ${ZPREFIX}zlibVersion (); -int -main () -{ -return ${ZPREFIX}zlibVersion (); - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - eval "$as_ac_Lib=yes" -else - eval "$as_ac_Lib=no" -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -eval ac_res=\$$as_ac_Lib - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } -if eval test \"x\$"$as_ac_Lib"\" = x"yes"; then : - cat >>confdefs.h <<_ACEOF -#define HAVE_LIBZ 1 -_ACEOF - - LIBS="-lz $LIBS" - -else - as_fn_error $? "zlib not installed" "$LINENO" 5 -fi - -fi - - -# The following is for pngvalid, to ensure it catches FP errors even on -# platforms that don't enable FP exceptions, the function appears in the math -# library (typically), it's not an error if it is not found. -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for feenableexcept in -lm" >&5 -$as_echo_n "checking for feenableexcept in -lm... " >&6; } -if ${ac_cv_lib_m_feenableexcept+:} false; then : - $as_echo_n "(cached) " >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-lm $LIBS" -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char feenableexcept (); -int -main () -{ -return feenableexcept (); - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - ac_cv_lib_m_feenableexcept=yes -else - ac_cv_lib_m_feenableexcept=no -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_m_feenableexcept" >&5 -$as_echo "$ac_cv_lib_m_feenableexcept" >&6; } -if test "x$ac_cv_lib_m_feenableexcept" = xyes; then : - cat >>confdefs.h <<_ACEOF -#define HAVE_LIBM 1 -_ACEOF - - LIBS="-lm $LIBS" - -fi - -for ac_func in feenableexcept -do : - ac_fn_c_check_func "$LINENO" "feenableexcept" "ac_cv_func_feenableexcept" -if test "x$ac_cv_func_feenableexcept" = xyes; then : - cat >>confdefs.h <<_ACEOF -#define HAVE_FEENABLEEXCEPT 1 -_ACEOF - -fi -done - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if using Solaris linker" >&5 -$as_echo_n "checking if using Solaris linker... " >&6; } -SLD=`$LD --version 2>&1 | grep Solaris` -if test "$SLD"; then - have_solaris_ld=yes - { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -$as_echo "yes" >&6; } -else - have_solaris_ld=no - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - if test "$have_solaris_ld" = "yes"; then - HAVE_SOLARIS_LD_TRUE= - HAVE_SOLARIS_LD_FALSE='#' -else - HAVE_SOLARIS_LD_TRUE='#' - HAVE_SOLARIS_LD_FALSE= -fi - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if libraries can be versioned" >&5 -$as_echo_n "checking if libraries can be versioned... " >&6; } -# Special case for PE/COFF platforms: ld reports -# support for version-script, but doesn't actually -# DO anything with it. -case $host in -*cygwin* | *mingw32* | *interix* ) - have_ld_version_script=no - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -;; -* ) - -if test "$have_solaris_ld" = "yes"; then - GLD=`$LD --help < /dev/null 2>&1 | grep 'M mapfile'` -else - GLD=`$LD --help < /dev/null 2>/dev/null | grep version-script` -fi - -if test "$GLD"; then - have_ld_version_script=yes - { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -$as_echo "yes" >&6; } -else - have_ld_version_script=no - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: *** You have not enabled versioned symbols." >&5 -$as_echo "$as_me: WARNING: *** You have not enabled versioned symbols." >&2;} -fi -;; -esac - - if test "$have_ld_version_script" = "yes"; then - HAVE_LD_VERSION_SCRIPT_TRUE= - HAVE_LD_VERSION_SCRIPT_FALSE='#' -else - HAVE_LD_VERSION_SCRIPT_TRUE='#' - HAVE_LD_VERSION_SCRIPT_FALSE= -fi - - -if test "$have_ld_version_script" = "yes"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for symbol prefix" >&5 -$as_echo_n "checking for symbol prefix... " >&6; } - SYMBOL_PREFIX=`echo "PREFIX=__USER_LABEL_PREFIX__" \ - | ${CPP-${CC-gcc} -E} - 2>&1 \ - | ${EGREP-grep} "^PREFIX=" \ - | ${SED-sed} -e "s:^PREFIX=::" -e "s:__USER_LABEL_PREFIX__::"` - - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $SYMBOL_PREFIX" >&5 -$as_echo "$SYMBOL_PREFIX" >&6; } -fi - -# Substitutions for .in files - - - - - -# Additional arguments (and substitutions) -# Allow the pkg-config directory to be set - -# Check whether --with-pkgconfigdir was given. -if test "${with_pkgconfigdir+set}" = set; then : - withval=$with_pkgconfigdir; pkgconfigdir=${withval} -else - pkgconfigdir='${libdir}/pkgconfig' -fi - - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: pkgconfig directory is ${pkgconfigdir}" >&5 -$as_echo "$as_me: pkgconfig directory is ${pkgconfigdir}" >&6;} - -# Make the *-config binary config scripts optional - -# Check whether --with-binconfigs was given. -if test "${with_binconfigs+set}" = set; then : - withval=$with_binconfigs; if test "${withval}" = no; then - binconfigs= - { $as_echo "$as_me:${as_lineno-$LINENO}: libpng-config scripts will not be built" >&5 -$as_echo "$as_me: libpng-config scripts will not be built" >&6;} - else - binconfigs='${binconfigs}' - fi -else - binconfigs='${binconfigs}' -fi - - - -# Support for prefixes to the API function names; this will generate defines -# at the start of the build to rename exported library functions - -# Check whether --with-libpng-prefix was given. -if test "${with_libpng_prefix+set}" = set; then : - withval=$with_libpng_prefix; if test "${withval:-no}" != "no"; then - PNG_PREFIX=${withval} - - fi -fi - - if test "${with_libpng_prefix:-no}" != "no"; then - DO_PNG_PREFIX_TRUE= - DO_PNG_PREFIX_FALSE='#' -else - DO_PNG_PREFIX_TRUE='#' - DO_PNG_PREFIX_FALSE= -fi - - -# Control over what links are made for installed files. Versioned files are -# always installed, when the following options are turned on corresponding -# unversioned links are also created (normally as symbolic links): -# Check whether --enable-unversioned-links was given. -if test "${enable_unversioned_links+set}" = set; then : - enableval=$enable_unversioned_links; -fi - - -# The AM_CONDITIONAL test is written so that the default is enabled; -# --disable-unversioned-links must be given to turn the option off. - if test "$enable_unversioned_links" != "no"; then - DO_INSTALL_LINKS_TRUE= - DO_INSTALL_LINKS_FALSE='#' -else - DO_INSTALL_LINKS_TRUE='#' - DO_INSTALL_LINKS_FALSE= -fi - - -# Check whether --enable-unversioned-libpng-pc was given. -if test "${enable_unversioned_libpng_pc+set}" = set; then : - enableval=$enable_unversioned_libpng_pc; -fi - - if test "$enable_unversioned_libpng_pc" != "no"; then - DO_INSTALL_LIBPNG_PC_TRUE= - DO_INSTALL_LIBPNG_PC_FALSE='#' -else - DO_INSTALL_LIBPNG_PC_TRUE='#' - DO_INSTALL_LIBPNG_PC_FALSE= -fi - - -# Check whether --enable-unversioned-libpng-config was given. -if test "${enable_unversioned_libpng_config+set}" = set; then : - enableval=$enable_unversioned_libpng_config; -fi - - if test "$enable_unversioned_libpng_config" != "no"; then - DO_INSTALL_LIBPNG_CONFIG_TRUE= - DO_INSTALL_LIBPNG_CONFIG_FALSE='#' -else - DO_INSTALL_LIBPNG_CONFIG_TRUE='#' - DO_INSTALL_LIBPNG_CONFIG_FALSE= -fi - - -# HOST SPECIFIC OPTIONS -# ===================== -# -# DEFAULT -# ======= -# -# Check whether --enable-hardware-optimizations was given. -if test "${enable_hardware_optimizations+set}" = set; then : - enableval=$enable_hardware_optimizations; case "$enableval" in - no|off) - # disable hardware optimization on all systems: - enable_arm_neon=no - -$as_echo "#define PNG_ARM_NEON_OPT 0" >>confdefs.h - - enable_mips_msa=no - -$as_echo "#define PNG_MIPS_MSA_OPT 0" >>confdefs.h - - enable_powerpc_vsx=no - -$as_echo "#define PNG_POWERPC_VSX_OPT 0" >>confdefs.h - - enable_intel_sse=no - -$as_echo "#define PNG_INTEL_SSE_OPT 0" >>confdefs.h - - ;; - *) - # allow enabling hardware optimization on any system: - case "$host_cpu" in - arm*|aarch64*) - enable_arm_neon=yes - -$as_echo "#define PNG_ARM_NEON_OPT 0" >>confdefs.h - - ;; - mipsel*|mips64el*) - enable_mips_msa=yes - -$as_echo "#define PNG_MIPS_MSA_OPT 0" >>confdefs.h - - ;; - i?86|x86_64) - enable_intel_sse=yes - -$as_echo "#define PNG_INTEL_SSE_OPT 1" >>confdefs.h - - ;; - powerpc*|ppc64*) - enable_powerpc_vsx=yes - -$as_echo "#define PNG_POWERPC_VSX_OPT 2" >>confdefs.h - - ;; - esac - ;; - esac -fi - - -# ARM -# === -# -# ARM NEON (SIMD) support. - -# Check whether --enable-arm-neon was given. -if test "${enable_arm_neon+set}" = set; then : - enableval=$enable_arm_neon; case "$enableval" in - no|off) - # disable the default enabling on __ARM_NEON__ systems: - -$as_echo "#define PNG_ARM_NEON_OPT 0" >>confdefs.h - - # Prevent inclusion of the assembler files below: - enable_arm_neon=no;; - check) - -$as_echo "#define PNG_ARM_NEON_CHECK_SUPPORTED /**/" >>confdefs.h -;; - api) - -$as_echo "#define PNG_ARM_NEON_API_SUPPORTED /**/" >>confdefs.h -;; - yes|on) - -$as_echo "#define PNG_ARM_NEON_OPT 2" >>confdefs.h - - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: --enable-arm-neon: please specify 'check' or 'api', if - you want the optimizations unconditionally pass -mfpu=neon - to the compiler." >&5 -$as_echo "$as_me: WARNING: --enable-arm-neon: please specify 'check' or 'api', if - you want the optimizations unconditionally pass -mfpu=neon - to the compiler." >&2;};; - *) - as_fn_error $? "--enable-arm-neon=${enable_arm_neon}: invalid value" "$LINENO" 5 - esac -fi - - -# Add ARM specific files to all builds where the host_cpu is arm ('arm*') or -# where ARM optimizations were explicitly requested (this allows a fallback if a -# future host CPU does not match 'arm*') - - if test "$enable_arm_neon" != 'no' && - case "$host_cpu" in - arm*|aarch64*) :;; - *) test "$enable_arm_neon" != '';; - esac; then - PNG_ARM_NEON_TRUE= - PNG_ARM_NEON_FALSE='#' -else - PNG_ARM_NEON_TRUE='#' - PNG_ARM_NEON_FALSE= -fi - - -# MIPS -# === -# -# MIPS MSA (SIMD) support. - -# Check whether --enable-mips-msa was given. -if test "${enable_mips_msa+set}" = set; then : - enableval=$enable_mips_msa; case "$enableval" in - no|off) - # disable the default enabling on __mips_msa systems: - -$as_echo "#define PNG_MIPS_MSA_OPT 0" >>confdefs.h - - # Prevent inclusion of the assembler files below: - enable_mips_msa=no;; - check) - -$as_echo "#define PNG_MIPS_MSA_CHECK_SUPPORTED /**/" >>confdefs.h -;; - api) - -$as_echo "#define PNG_MIPS_MSA_API_SUPPORTED /**/" >>confdefs.h -;; - yes|on) - -$as_echo "#define PNG_MIPS_MSA_OPT 2" >>confdefs.h - - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: --enable-mips-msa: please specify 'check' or 'api', if - you want the optimizations unconditionally pass '-mmsa -mfp64' - to the compiler." >&5 -$as_echo "$as_me: WARNING: --enable-mips-msa: please specify 'check' or 'api', if - you want the optimizations unconditionally pass '-mmsa -mfp64' - to the compiler." >&2;};; - *) - as_fn_error $? "--enable-mips-msa=${enable_mips_msa}: invalid value" "$LINENO" 5 - esac -fi - - -# Add MIPS specific files to all builds where the host_cpu is mips ('mips*') or -# where MIPS optimizations were explicitly requested (this allows a fallback if a -# future host CPU does not match 'mips*') - - if test "$enable_mips_msa" != 'no' && - case "$host_cpu" in - mipsel*|mips64el*) :;; - esac; then - PNG_MIPS_MSA_TRUE= - PNG_MIPS_MSA_FALSE='#' -else - PNG_MIPS_MSA_TRUE='#' - PNG_MIPS_MSA_FALSE= -fi - - -# INTEL -# ===== -# -# INTEL SSE (SIMD) support. - -# Check whether --enable-intel-sse was given. -if test "${enable_intel_sse+set}" = set; then : - enableval=$enable_intel_sse; case "$enableval" in - no|off) - # disable the default enabling: - -$as_echo "#define PNG_INTEL_SSE_OPT 0" >>confdefs.h - - # Prevent inclusion of the assembler files below: - enable_intel_sse=no;; - yes|on) - -$as_echo "#define PNG_INTEL_SSE_OPT 1" >>confdefs.h -;; - *) - as_fn_error $? "--enable-intel-sse=${enable_intel_sse}: invalid value" "$LINENO" 5 - esac -fi - - -# Add Intel specific files to all builds where the host_cpu is Intel ('x86*') -# or where Intel optimizations were explicitly requested (this allows a -# fallback if a future host CPU does not match 'x86*') - if test "$enable_intel_sse" != 'no' && - case "$host_cpu" in - i?86|x86_64) :;; - *) test "$enable_intel_sse" != '';; - esac; then - PNG_INTEL_SSE_TRUE= - PNG_INTEL_SSE_FALSE='#' -else - PNG_INTEL_SSE_TRUE='#' - PNG_INTEL_SSE_FALSE= -fi - - -# PowerPC -# === -# -# PowerPC VSX (SIMD) support. - -# Check whether --enable-powerpc-vsx was given. -if test "${enable_powerpc_vsx+set}" = set; then : - enableval=$enable_powerpc_vsx; case "$enableval" in - no|off) - # disable the default enabling on __ppc64__ systems: - -$as_echo "#define PNG_POWERPC_VSX_OPT 0" >>confdefs.h - - # Prevent inclusion of the platform specific files below: - enable_powerpc_vsx=no;; - check) - -$as_echo "#define PNG_POWERPC_VSX_CHECK_SUPPORTED /**/" >>confdefs.h - - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: --enable-powerpc-vsx Please check contrib/powerpc/README file - for the list of supported OSes." >&5 -$as_echo "$as_me: WARNING: --enable-powerpc-vsx Please check contrib/powerpc/README file - for the list of supported OSes." >&2;};; - api) - -$as_echo "#define PNG_POWERPC_VSX_API_SUPPORTED /**/" >>confdefs.h -;; - yes|on) - -$as_echo "#define PNG_POWERPC_VSX_OPT 2" >>confdefs.h - - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: --enable-powerpc-vsx: please specify 'check' or 'api', if - you want the optimizations unconditionally pass '-maltivec -mvsx' - or '-mcpu=power8'to the compiler." >&5 -$as_echo "$as_me: WARNING: --enable-powerpc-vsx: please specify 'check' or 'api', if - you want the optimizations unconditionally pass '-maltivec -mvsx' - or '-mcpu=power8'to the compiler." >&2;};; - *) - as_fn_error $? "--enable-powerpc-vsx=${enable_powerpc_vsx}: invalid value" "$LINENO" 5 - esac -fi - - -# Add PowerPC specific files to all builds where the host_cpu is powerpc('powerpc*') or -# where POWERPC optimizations were explicitly requested (this allows a fallback if a -# future host CPU does not match 'powerpc*') - - if test "$enable_powerpc_vsx" != 'no' && - case "$host_cpu" in - powerpc*|ppc64*) :;; - esac; then - PNG_POWERPC_VSX_TRUE= - PNG_POWERPC_VSX_FALSE='#' -else - PNG_POWERPC_VSX_TRUE='#' - PNG_POWERPC_VSX_FALSE= -fi - - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: Extra options for compiler: $PNG_COPTS" >&5 -$as_echo "$as_me: Extra options for compiler: $PNG_COPTS" >&6;} - -# Config files, substituting as above -ac_config_files="$ac_config_files Makefile libpng.pc:libpng.pc.in" - -ac_config_files="$ac_config_files libpng-config:libpng-config.in" - - -cat >confcache <<\_ACEOF -# This file is a shell script that caches the results of configure -# tests run on this system so they can be shared between configure -# scripts and configure runs, see configure's option --config-cache. -# It is not useful on other systems. If it contains results you don't -# want to keep, you may remove or edit it. -# -# config.status only pays attention to the cache file if you give it -# the --recheck option to rerun configure. -# -# `ac_cv_env_foo' variables (set or unset) will be overridden when -# loading this file, other *unset* `ac_cv_foo' will be assigned the -# following values. - -_ACEOF - -# The following way of writing the cache mishandles newlines in values, -# but we know of no workaround that is simple, portable, and efficient. -# So, we kill variables containing newlines. -# Ultrix sh set writes to stderr and can't be redirected directly, -# and sets the high bit in the cache file unless we assign to the vars. -( - for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do - eval ac_val=\$$ac_var - case $ac_val in #( - *${as_nl}*) - case $ac_var in #( - *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5 -$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;; - esac - case $ac_var in #( - _ | IFS | as_nl) ;; #( - BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #( - *) { eval $ac_var=; unset $ac_var;} ;; - esac ;; - esac - done - - (set) 2>&1 | - case $as_nl`(ac_space=' '; set) 2>&1` in #( - *${as_nl}ac_space=\ *) - # `set' does not quote correctly, so add quotes: double-quote - # substitution turns \\\\ into \\, and sed turns \\ into \. - sed -n \ - "s/'/'\\\\''/g; - s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p" - ;; #( - *) - # `set' quotes correctly as required by POSIX, so do not add quotes. - sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" - ;; - esac | - sort -) | - sed ' - /^ac_cv_env_/b end - t clear - :clear - s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/ - t end - s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/ - :end' >>confcache -if diff "$cache_file" confcache >/dev/null 2>&1; then :; else - if test -w "$cache_file"; then - if test "x$cache_file" != "x/dev/null"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: updating cache $cache_file" >&5 -$as_echo "$as_me: updating cache $cache_file" >&6;} - if test ! -f "$cache_file" || test -h "$cache_file"; then - cat confcache >"$cache_file" - else - case $cache_file in #( - */* | ?:*) - mv -f confcache "$cache_file"$$ && - mv -f "$cache_file"$$ "$cache_file" ;; #( - *) - mv -f confcache "$cache_file" ;; - esac - fi - fi - else - { $as_echo "$as_me:${as_lineno-$LINENO}: not updating unwritable cache $cache_file" >&5 -$as_echo "$as_me: not updating unwritable cache $cache_file" >&6;} - fi -fi -rm -f confcache - -test "x$prefix" = xNONE && prefix=$ac_default_prefix -# Let make expand exec_prefix. -test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' - -DEFS=-DHAVE_CONFIG_H - -ac_libobjs= -ac_ltlibobjs= -U= -for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue - # 1. Remove the extension, and $U if already installed. - ac_script='s/\$U\././;s/\.o$//;s/\.obj$//' - ac_i=`$as_echo "$ac_i" | sed "$ac_script"` - # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR - # will be set to the directory where LIBOBJS objects are built. - as_fn_append ac_libobjs " \${LIBOBJDIR}$ac_i\$U.$ac_objext" - as_fn_append ac_ltlibobjs " \${LIBOBJDIR}$ac_i"'$U.lo' -done -LIBOBJS=$ac_libobjs - -LTLIBOBJS=$ac_ltlibobjs - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking that generated files are newer than configure" >&5 -$as_echo_n "checking that generated files are newer than configure... " >&6; } - if test -n "$am_sleep_pid"; then - # Hide warnings about reused PIDs. - wait $am_sleep_pid 2>/dev/null - fi - { $as_echo "$as_me:${as_lineno-$LINENO}: result: done" >&5 -$as_echo "done" >&6; } - if test -n "$EXEEXT"; then - am__EXEEXT_TRUE= - am__EXEEXT_FALSE='#' -else - am__EXEEXT_TRUE='#' - am__EXEEXT_FALSE= -fi - -if test -z "${MAINTAINER_MODE_TRUE}" && test -z "${MAINTAINER_MODE_FALSE}"; then - as_fn_error $? "conditional \"MAINTAINER_MODE\" was never defined. -Usually this means the macro was only invoked conditionally." "$LINENO" 5 -fi -if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then - as_fn_error $? "conditional \"AMDEP\" was never defined. -Usually this means the macro was only invoked conditionally." "$LINENO" 5 -fi -if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then - as_fn_error $? "conditional \"am__fastdepCC\" was never defined. -Usually this means the macro was only invoked conditionally." "$LINENO" 5 -fi -if test -z "${am__fastdepCCAS_TRUE}" && test -z "${am__fastdepCCAS_FALSE}"; then - as_fn_error $? "conditional \"am__fastdepCCAS\" was never defined. -Usually this means the macro was only invoked conditionally." "$LINENO" 5 -fi -if test -z "${HAVE_CLOCK_GETTIME_TRUE}" && test -z "${HAVE_CLOCK_GETTIME_FALSE}"; then - as_fn_error $? "conditional \"HAVE_CLOCK_GETTIME\" was never defined. -Usually this means the macro was only invoked conditionally." "$LINENO" 5 -fi -if test -z "${HAVE_SOLARIS_LD_TRUE}" && test -z "${HAVE_SOLARIS_LD_FALSE}"; then - as_fn_error $? "conditional \"HAVE_SOLARIS_LD\" was never defined. -Usually this means the macro was only invoked conditionally." "$LINENO" 5 -fi -if test -z "${HAVE_LD_VERSION_SCRIPT_TRUE}" && test -z "${HAVE_LD_VERSION_SCRIPT_FALSE}"; then - as_fn_error $? "conditional \"HAVE_LD_VERSION_SCRIPT\" was never defined. -Usually this means the macro was only invoked conditionally." "$LINENO" 5 -fi -if test -z "${DO_PNG_PREFIX_TRUE}" && test -z "${DO_PNG_PREFIX_FALSE}"; then - as_fn_error $? "conditional \"DO_PNG_PREFIX\" was never defined. -Usually this means the macro was only invoked conditionally." "$LINENO" 5 -fi -if test -z "${DO_INSTALL_LINKS_TRUE}" && test -z "${DO_INSTALL_LINKS_FALSE}"; then - as_fn_error $? "conditional \"DO_INSTALL_LINKS\" was never defined. -Usually this means the macro was only invoked conditionally." "$LINENO" 5 -fi -if test -z "${DO_INSTALL_LIBPNG_PC_TRUE}" && test -z "${DO_INSTALL_LIBPNG_PC_FALSE}"; then - as_fn_error $? "conditional \"DO_INSTALL_LIBPNG_PC\" was never defined. -Usually this means the macro was only invoked conditionally." "$LINENO" 5 -fi -if test -z "${DO_INSTALL_LIBPNG_CONFIG_TRUE}" && test -z "${DO_INSTALL_LIBPNG_CONFIG_FALSE}"; then - as_fn_error $? "conditional \"DO_INSTALL_LIBPNG_CONFIG\" was never defined. -Usually this means the macro was only invoked conditionally." "$LINENO" 5 -fi -if test -z "${PNG_ARM_NEON_TRUE}" && test -z "${PNG_ARM_NEON_FALSE}"; then - as_fn_error $? "conditional \"PNG_ARM_NEON\" was never defined. -Usually this means the macro was only invoked conditionally." "$LINENO" 5 -fi -if test -z "${PNG_MIPS_MSA_TRUE}" && test -z "${PNG_MIPS_MSA_FALSE}"; then - as_fn_error $? "conditional \"PNG_MIPS_MSA\" was never defined. -Usually this means the macro was only invoked conditionally." "$LINENO" 5 -fi -if test -z "${PNG_INTEL_SSE_TRUE}" && test -z "${PNG_INTEL_SSE_FALSE}"; then - as_fn_error $? "conditional \"PNG_INTEL_SSE\" was never defined. -Usually this means the macro was only invoked conditionally." "$LINENO" 5 -fi -if test -z "${PNG_POWERPC_VSX_TRUE}" && test -z "${PNG_POWERPC_VSX_FALSE}"; then - as_fn_error $? "conditional \"PNG_POWERPC_VSX\" was never defined. -Usually this means the macro was only invoked conditionally." "$LINENO" 5 -fi - -: "${CONFIG_STATUS=./config.status}" -ac_write_fail=0 -ac_clean_files_save=$ac_clean_files -ac_clean_files="$ac_clean_files $CONFIG_STATUS" -{ $as_echo "$as_me:${as_lineno-$LINENO}: creating $CONFIG_STATUS" >&5 -$as_echo "$as_me: creating $CONFIG_STATUS" >&6;} -as_write_fail=0 -cat >$CONFIG_STATUS <<_ASEOF || as_write_fail=1 -#! $SHELL -# Generated by $as_me. -# Run this file to recreate the current configuration. -# Compiler output produced by configure, useful for debugging -# configure, is in config.log if it exists. - -debug=false -ac_cs_recheck=false -ac_cs_silent=false - -SHELL=\${CONFIG_SHELL-$SHELL} -export SHELL -_ASEOF -cat >>$CONFIG_STATUS <<\_ASEOF || as_write_fail=1 -## -------------------- ## -## M4sh Initialization. ## -## -------------------- ## - -# Be more Bourne compatible -DUALCASE=1; export DUALCASE # for MKS sh -if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then : - emulate sh - NULLCMD=: - # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which - # is contrary to our usage. Disable this feature. - alias -g '${1+"$@"}'='"$@"' - setopt NO_GLOB_SUBST -else - case `(set -o) 2>/dev/null` in #( - *posix*) : - set -o posix ;; #( - *) : - ;; -esac -fi - - -as_nl=' -' -export as_nl -# Printing a long string crashes Solaris 7 /usr/bin/printf. -as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' -as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo -as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo -# Prefer a ksh shell builtin over an external printf program on Solaris, -# but without wasting forks for bash or zsh. -if test -z "$BASH_VERSION$ZSH_VERSION" \ - && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then - as_echo='print -r --' - as_echo_n='print -rn --' -elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then - as_echo='printf %s\n' - as_echo_n='printf %s' -else - if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then - as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"' - as_echo_n='/usr/ucb/echo -n' - else - as_echo_body='eval expr "X$1" : "X\\(.*\\)"' - as_echo_n_body='eval - arg=$1; - case $arg in #( - *"$as_nl"*) - expr "X$arg" : "X\\(.*\\)$as_nl"; - arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;; - esac; - expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl" - ' - export as_echo_n_body - as_echo_n='sh -c $as_echo_n_body as_echo' - fi - export as_echo_body - as_echo='sh -c $as_echo_body as_echo' -fi - -# The user is always right. -if test "${PATH_SEPARATOR+set}" != set; then - PATH_SEPARATOR=: - (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && { - (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 || - PATH_SEPARATOR=';' - } -fi - - -# IFS -# We need space, tab and new line, in precisely that order. Quoting is -# there to prevent editors from complaining about space-tab. -# (If _AS_PATH_WALK were called with IFS unset, it would disable word -# splitting by setting IFS to empty value.) -IFS=" "" $as_nl" - -# Find who we are. Look in the path if we contain no directory separator. -as_myself= -case $0 in #(( - *[\\/]* ) as_myself=$0 ;; - *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break - done -IFS=$as_save_IFS - - ;; -esac -# We did not find ourselves, most probably we were run as `sh COMMAND' -# in which case we are not to be found in the path. -if test "x$as_myself" = x; then - as_myself=$0 -fi -if test ! -f "$as_myself"; then - $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 - exit 1 -fi - -# Unset variables that we do not need and which cause bugs (e.g. in -# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1" -# suppresses any "Segmentation fault" message there. '((' could -# trigger a bug in pdksh 5.2.14. -for as_var in BASH_ENV ENV MAIL MAILPATH -do eval test x\${$as_var+set} = xset \ - && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || : -done -PS1='$ ' -PS2='> ' -PS4='+ ' - -# NLS nuisances. -LC_ALL=C -export LC_ALL -LANGUAGE=C -export LANGUAGE - -# CDPATH. -(unset CDPATH) >/dev/null 2>&1 && unset CDPATH - - -# as_fn_error STATUS ERROR [LINENO LOG_FD] -# ---------------------------------------- -# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are -# provided, also output the error to LOG_FD, referencing LINENO. Then exit the -# script with STATUS, using 1 if that was 0. -as_fn_error () -{ - as_status=$1; test $as_status -eq 0 && as_status=1 - if test "$4"; then - as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4 - fi - $as_echo "$as_me: error: $2" >&2 - as_fn_exit $as_status -} # as_fn_error - - -# as_fn_set_status STATUS -# ----------------------- -# Set $? to STATUS, without forking. -as_fn_set_status () -{ - return $1 -} # as_fn_set_status - -# as_fn_exit STATUS -# ----------------- -# Exit the shell with STATUS, even in a "trap 0" or "set -e" context. -as_fn_exit () -{ - set +e - as_fn_set_status $1 - exit $1 -} # as_fn_exit - -# as_fn_unset VAR -# --------------- -# Portably unset VAR. -as_fn_unset () -{ - { eval $1=; unset $1;} -} -as_unset=as_fn_unset -# as_fn_append VAR VALUE -# ---------------------- -# Append the text in VALUE to the end of the definition contained in VAR. Take -# advantage of any shell optimizations that allow amortized linear growth over -# repeated appends, instead of the typical quadratic growth present in naive -# implementations. -if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then : - eval 'as_fn_append () - { - eval $1+=\$2 - }' -else - as_fn_append () - { - eval $1=\$$1\$2 - } -fi # as_fn_append - -# as_fn_arith ARG... -# ------------------ -# Perform arithmetic evaluation on the ARGs, and store the result in the -# global $as_val. Take advantage of shells that can avoid forks. The arguments -# must be portable across $(()) and expr. -if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then : - eval 'as_fn_arith () - { - as_val=$(( $* )) - }' -else - as_fn_arith () - { - as_val=`expr "$@" || test $? -eq 1` - } -fi # as_fn_arith - - -if expr a : '\(a\)' >/dev/null 2>&1 && - test "X`expr 00001 : '.*\(...\)'`" = X001; then - as_expr=expr -else - as_expr=false -fi - -if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then - as_basename=basename -else - as_basename=false -fi - -if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then - as_dirname=dirname -else - as_dirname=false -fi - -as_me=`$as_basename -- "$0" || -$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ - X"$0" : 'X\(//\)$' \| \ - X"$0" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X/"$0" | - sed '/^.*\/\([^/][^/]*\)\/*$/{ - s//\1/ - q - } - /^X\/\(\/\/\)$/{ - s//\1/ - q - } - /^X\/\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - -# Avoid depending upon Character Ranges. -as_cr_letters='abcdefghijklmnopqrstuvwxyz' -as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' -as_cr_Letters=$as_cr_letters$as_cr_LETTERS -as_cr_digits='0123456789' -as_cr_alnum=$as_cr_Letters$as_cr_digits - -ECHO_C= ECHO_N= ECHO_T= -case `echo -n x` in #((((( --n*) - case `echo 'xy\c'` in - *c*) ECHO_T=' ';; # ECHO_T is single tab character. - xy) ECHO_C='\c';; - *) echo `echo ksh88 bug on AIX 6.1` > /dev/null - ECHO_T=' ';; - esac;; -*) - ECHO_N='-n';; -esac - -rm -f conf$$ conf$$.exe conf$$.file -if test -d conf$$.dir; then - rm -f conf$$.dir/conf$$.file -else - rm -f conf$$.dir - mkdir conf$$.dir 2>/dev/null -fi -if (echo >conf$$.file) 2>/dev/null; then - if ln -s conf$$.file conf$$ 2>/dev/null; then - as_ln_s='ln -s' - # ... but there are two gotchas: - # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. - # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. - # In both cases, we have to default to `cp -pR'. - ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || - as_ln_s='cp -pR' - elif ln conf$$.file conf$$ 2>/dev/null; then - as_ln_s=ln - else - as_ln_s='cp -pR' - fi -else - as_ln_s='cp -pR' -fi -rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file -rmdir conf$$.dir 2>/dev/null - - -# as_fn_mkdir_p -# ------------- -# Create "$as_dir" as a directory, including parents if necessary. -as_fn_mkdir_p () -{ - - case $as_dir in #( - -*) as_dir=./$as_dir;; - esac - test -d "$as_dir" || eval $as_mkdir_p || { - as_dirs= - while :; do - case $as_dir in #( - *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( - *) as_qdir=$as_dir;; - esac - as_dirs="'$as_qdir' $as_dirs" - as_dir=`$as_dirname -- "$as_dir" || -$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$as_dir" : 'X\(//\)[^/]' \| \ - X"$as_dir" : 'X\(//\)$' \| \ - X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X"$as_dir" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - test -d "$as_dir" && break - done - test -z "$as_dirs" || eval "mkdir $as_dirs" - } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir" - - -} # as_fn_mkdir_p -if mkdir -p . 2>/dev/null; then - as_mkdir_p='mkdir -p "$as_dir"' -else - test -d ./-p && rmdir ./-p - as_mkdir_p=false -fi - - -# as_fn_executable_p FILE -# ----------------------- -# Test if FILE is an executable regular file. -as_fn_executable_p () -{ - test -f "$1" && test -x "$1" -} # as_fn_executable_p -as_test_x='test -x' -as_executable_p=as_fn_executable_p - -# Sed expression to map a string onto a valid CPP name. -as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" - -# Sed expression to map a string onto a valid variable name. -as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" - - -exec 6>&1 -## ----------------------------------- ## -## Main body of $CONFIG_STATUS script. ## -## ----------------------------------- ## -_ASEOF -test $as_write_fail = 0 && chmod +x $CONFIG_STATUS || ac_write_fail=1 - -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -# Save the log message, to keep $0 and so on meaningful, and to -# report actual input values of CONFIG_FILES etc. instead of their -# values after options handling. -ac_log=" -This file was extended by libpng $as_me 1.6.38.git, which was -generated by GNU Autoconf 2.69. Invocation command line was - - CONFIG_FILES = $CONFIG_FILES - CONFIG_HEADERS = $CONFIG_HEADERS - CONFIG_LINKS = $CONFIG_LINKS - CONFIG_COMMANDS = $CONFIG_COMMANDS - $ $0 $@ - -on `(hostname || uname -n) 2>/dev/null | sed 1q` -" - -_ACEOF - -case $ac_config_files in *" -"*) set x $ac_config_files; shift; ac_config_files=$*;; -esac - -case $ac_config_headers in *" -"*) set x $ac_config_headers; shift; ac_config_headers=$*;; -esac - - -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -# Files that config.status was made for. -config_files="$ac_config_files" -config_headers="$ac_config_headers" -config_commands="$ac_config_commands" - -_ACEOF - -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -ac_cs_usage="\ -\`$as_me' instantiates files and other configuration actions -from templates according to the current configuration. Unless the files -and actions are specified as TAGs, all are instantiated by default. - -Usage: $0 [OPTION]... [TAG]... - - -h, --help print this help, then exit - -V, --version print version number and configuration settings, then exit - --config print configuration, then exit - -q, --quiet, --silent - do not print progress messages - -d, --debug don't remove temporary files - --recheck update $as_me by reconfiguring in the same conditions - --file=FILE[:TEMPLATE] - instantiate the configuration file FILE - --header=FILE[:TEMPLATE] - instantiate the configuration header FILE - -Configuration files: -$config_files - -Configuration headers: -$config_headers - -Configuration commands: -$config_commands - -Report bugs to ." - -_ACEOF -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`" -ac_cs_version="\\ -libpng config.status 1.6.38.git -configured by $0, generated by GNU Autoconf 2.69, - with options \\"\$ac_cs_config\\" - -Copyright (C) 2012 Free Software Foundation, Inc. -This config.status script is free software; the Free Software Foundation -gives unlimited permission to copy, distribute and modify it." - -ac_pwd='$ac_pwd' -srcdir='$srcdir' -INSTALL='$INSTALL' -MKDIR_P='$MKDIR_P' -AWK='$AWK' -test -n "\$AWK" || AWK=awk -_ACEOF - -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -# The default lists apply if the user does not specify any file. -ac_need_defaults=: -while test $# != 0 -do - case $1 in - --*=?*) - ac_option=`expr "X$1" : 'X\([^=]*\)='` - ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'` - ac_shift=: - ;; - --*=) - ac_option=`expr "X$1" : 'X\([^=]*\)='` - ac_optarg= - ac_shift=: - ;; - *) - ac_option=$1 - ac_optarg=$2 - ac_shift=shift - ;; - esac - - case $ac_option in - # Handling of the options. - -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) - ac_cs_recheck=: ;; - --version | --versio | --versi | --vers | --ver | --ve | --v | -V ) - $as_echo "$ac_cs_version"; exit ;; - --config | --confi | --conf | --con | --co | --c ) - $as_echo "$ac_cs_config"; exit ;; - --debug | --debu | --deb | --de | --d | -d ) - debug=: ;; - --file | --fil | --fi | --f ) - $ac_shift - case $ac_optarg in - *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; - '') as_fn_error $? "missing file argument" ;; - esac - as_fn_append CONFIG_FILES " '$ac_optarg'" - ac_need_defaults=false;; - --header | --heade | --head | --hea ) - $ac_shift - case $ac_optarg in - *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; - esac - as_fn_append CONFIG_HEADERS " '$ac_optarg'" - ac_need_defaults=false;; - --he | --h) - # Conflict between --help and --header - as_fn_error $? "ambiguous option: \`$1' -Try \`$0 --help' for more information.";; - --help | --hel | -h ) - $as_echo "$ac_cs_usage"; exit ;; - -q | -quiet | --quiet | --quie | --qui | --qu | --q \ - | -silent | --silent | --silen | --sile | --sil | --si | --s) - ac_cs_silent=: ;; - - # This is an error. - -*) as_fn_error $? "unrecognized option: \`$1' -Try \`$0 --help' for more information." ;; - - *) as_fn_append ac_config_targets " $1" - ac_need_defaults=false ;; - - esac - shift -done - -ac_configure_extra_args= - -if $ac_cs_silent; then - exec 6>/dev/null - ac_configure_extra_args="$ac_configure_extra_args --silent" -fi - -_ACEOF -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -if \$ac_cs_recheck; then - set X $SHELL '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion - shift - \$as_echo "running CONFIG_SHELL=$SHELL \$*" >&6 - CONFIG_SHELL='$SHELL' - export CONFIG_SHELL - exec "\$@" -fi - -_ACEOF -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -exec 5>>config.log -{ - echo - sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX -## Running $as_me. ## -_ASBOX - $as_echo "$ac_log" -} >&5 - -_ACEOF -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -# -# INIT-COMMANDS -# -AMDEP_TRUE="$AMDEP_TRUE" MAKE="${MAKE-make}" - - -# The HP-UX ksh and POSIX shell print the target directory to stdout -# if CDPATH is set. -(unset CDPATH) >/dev/null 2>&1 && unset CDPATH - -sed_quote_subst='$sed_quote_subst' -double_quote_subst='$double_quote_subst' -delay_variable_subst='$delay_variable_subst' -SED='`$ECHO "$SED" | $SED "$delay_single_quote_subst"`' -Xsed='`$ECHO "$Xsed" | $SED "$delay_single_quote_subst"`' -GREP='`$ECHO "$GREP" | $SED "$delay_single_quote_subst"`' -EGREP='`$ECHO "$EGREP" | $SED "$delay_single_quote_subst"`' -FGREP='`$ECHO "$FGREP" | $SED "$delay_single_quote_subst"`' -SHELL='`$ECHO "$SHELL" | $SED "$delay_single_quote_subst"`' -ECHO='`$ECHO "$ECHO" | $SED "$delay_single_quote_subst"`' -LD='`$ECHO "$LD" | $SED "$delay_single_quote_subst"`' -macro_version='`$ECHO "$macro_version" | $SED "$delay_single_quote_subst"`' -macro_revision='`$ECHO "$macro_revision" | $SED "$delay_single_quote_subst"`' -AS='`$ECHO "$AS" | $SED "$delay_single_quote_subst"`' -DLLTOOL='`$ECHO "$DLLTOOL" | $SED "$delay_single_quote_subst"`' -OBJDUMP='`$ECHO "$OBJDUMP" | $SED "$delay_single_quote_subst"`' -enable_shared='`$ECHO "$enable_shared" | $SED "$delay_single_quote_subst"`' -enable_static='`$ECHO "$enable_static" | $SED "$delay_single_quote_subst"`' -pic_mode='`$ECHO "$pic_mode" | $SED "$delay_single_quote_subst"`' -enable_fast_install='`$ECHO "$enable_fast_install" | $SED "$delay_single_quote_subst"`' -shared_archive_member_spec='`$ECHO "$shared_archive_member_spec" | $SED "$delay_single_quote_subst"`' -PATH_SEPARATOR='`$ECHO "$PATH_SEPARATOR" | $SED "$delay_single_quote_subst"`' -host_alias='`$ECHO "$host_alias" | $SED "$delay_single_quote_subst"`' -host='`$ECHO "$host" | $SED "$delay_single_quote_subst"`' -host_os='`$ECHO "$host_os" | $SED "$delay_single_quote_subst"`' -build_alias='`$ECHO "$build_alias" | $SED "$delay_single_quote_subst"`' -build='`$ECHO "$build" | $SED "$delay_single_quote_subst"`' -build_os='`$ECHO "$build_os" | $SED "$delay_single_quote_subst"`' -NM='`$ECHO "$NM" | $SED "$delay_single_quote_subst"`' -LN_S='`$ECHO "$LN_S" | $SED "$delay_single_quote_subst"`' -max_cmd_len='`$ECHO "$max_cmd_len" | $SED "$delay_single_quote_subst"`' -ac_objext='`$ECHO "$ac_objext" | $SED "$delay_single_quote_subst"`' -exeext='`$ECHO "$exeext" | $SED "$delay_single_quote_subst"`' -lt_unset='`$ECHO "$lt_unset" | $SED "$delay_single_quote_subst"`' -lt_SP2NL='`$ECHO "$lt_SP2NL" | $SED "$delay_single_quote_subst"`' -lt_NL2SP='`$ECHO "$lt_NL2SP" | $SED "$delay_single_quote_subst"`' -lt_cv_to_host_file_cmd='`$ECHO "$lt_cv_to_host_file_cmd" | $SED "$delay_single_quote_subst"`' -lt_cv_to_tool_file_cmd='`$ECHO "$lt_cv_to_tool_file_cmd" | $SED "$delay_single_quote_subst"`' -reload_flag='`$ECHO "$reload_flag" | $SED "$delay_single_quote_subst"`' -reload_cmds='`$ECHO "$reload_cmds" | $SED "$delay_single_quote_subst"`' -deplibs_check_method='`$ECHO "$deplibs_check_method" | $SED "$delay_single_quote_subst"`' -file_magic_cmd='`$ECHO "$file_magic_cmd" | $SED "$delay_single_quote_subst"`' -file_magic_glob='`$ECHO "$file_magic_glob" | $SED "$delay_single_quote_subst"`' -want_nocaseglob='`$ECHO "$want_nocaseglob" | $SED "$delay_single_quote_subst"`' -sharedlib_from_linklib_cmd='`$ECHO "$sharedlib_from_linklib_cmd" | $SED "$delay_single_quote_subst"`' -AR='`$ECHO "$AR" | $SED "$delay_single_quote_subst"`' -AR_FLAGS='`$ECHO "$AR_FLAGS" | $SED "$delay_single_quote_subst"`' -archiver_list_spec='`$ECHO "$archiver_list_spec" | $SED "$delay_single_quote_subst"`' -STRIP='`$ECHO "$STRIP" | $SED "$delay_single_quote_subst"`' -RANLIB='`$ECHO "$RANLIB" | $SED "$delay_single_quote_subst"`' -old_postinstall_cmds='`$ECHO "$old_postinstall_cmds" | $SED "$delay_single_quote_subst"`' -old_postuninstall_cmds='`$ECHO "$old_postuninstall_cmds" | $SED "$delay_single_quote_subst"`' -old_archive_cmds='`$ECHO "$old_archive_cmds" | $SED "$delay_single_quote_subst"`' -lock_old_archive_extraction='`$ECHO "$lock_old_archive_extraction" | $SED "$delay_single_quote_subst"`' -CC='`$ECHO "$CC" | $SED "$delay_single_quote_subst"`' -CFLAGS='`$ECHO "$CFLAGS" | $SED "$delay_single_quote_subst"`' -compiler='`$ECHO "$compiler" | $SED "$delay_single_quote_subst"`' -GCC='`$ECHO "$GCC" | $SED "$delay_single_quote_subst"`' -lt_cv_sys_global_symbol_pipe='`$ECHO "$lt_cv_sys_global_symbol_pipe" | $SED "$delay_single_quote_subst"`' -lt_cv_sys_global_symbol_to_cdecl='`$ECHO "$lt_cv_sys_global_symbol_to_cdecl" | $SED "$delay_single_quote_subst"`' -lt_cv_sys_global_symbol_to_import='`$ECHO "$lt_cv_sys_global_symbol_to_import" | $SED "$delay_single_quote_subst"`' -lt_cv_sys_global_symbol_to_c_name_address='`$ECHO "$lt_cv_sys_global_symbol_to_c_name_address" | $SED "$delay_single_quote_subst"`' -lt_cv_sys_global_symbol_to_c_name_address_lib_prefix='`$ECHO "$lt_cv_sys_global_symbol_to_c_name_address_lib_prefix" | $SED "$delay_single_quote_subst"`' -lt_cv_nm_interface='`$ECHO "$lt_cv_nm_interface" | $SED "$delay_single_quote_subst"`' -nm_file_list_spec='`$ECHO "$nm_file_list_spec" | $SED "$delay_single_quote_subst"`' -lt_sysroot='`$ECHO "$lt_sysroot" | $SED "$delay_single_quote_subst"`' -lt_cv_truncate_bin='`$ECHO "$lt_cv_truncate_bin" | $SED "$delay_single_quote_subst"`' -objdir='`$ECHO "$objdir" | $SED "$delay_single_quote_subst"`' -MAGIC_CMD='`$ECHO "$MAGIC_CMD" | $SED "$delay_single_quote_subst"`' -lt_prog_compiler_no_builtin_flag='`$ECHO "$lt_prog_compiler_no_builtin_flag" | $SED "$delay_single_quote_subst"`' -lt_prog_compiler_pic='`$ECHO "$lt_prog_compiler_pic" | $SED "$delay_single_quote_subst"`' -lt_prog_compiler_wl='`$ECHO "$lt_prog_compiler_wl" | $SED "$delay_single_quote_subst"`' -lt_prog_compiler_static='`$ECHO "$lt_prog_compiler_static" | $SED "$delay_single_quote_subst"`' -lt_cv_prog_compiler_c_o='`$ECHO "$lt_cv_prog_compiler_c_o" | $SED "$delay_single_quote_subst"`' -need_locks='`$ECHO "$need_locks" | $SED "$delay_single_quote_subst"`' -MANIFEST_TOOL='`$ECHO "$MANIFEST_TOOL" | $SED "$delay_single_quote_subst"`' -DSYMUTIL='`$ECHO "$DSYMUTIL" | $SED "$delay_single_quote_subst"`' -NMEDIT='`$ECHO "$NMEDIT" | $SED "$delay_single_quote_subst"`' -LIPO='`$ECHO "$LIPO" | $SED "$delay_single_quote_subst"`' -OTOOL='`$ECHO "$OTOOL" | $SED "$delay_single_quote_subst"`' -OTOOL64='`$ECHO "$OTOOL64" | $SED "$delay_single_quote_subst"`' -libext='`$ECHO "$libext" | $SED "$delay_single_quote_subst"`' -shrext_cmds='`$ECHO "$shrext_cmds" | $SED "$delay_single_quote_subst"`' -extract_expsyms_cmds='`$ECHO "$extract_expsyms_cmds" | $SED "$delay_single_quote_subst"`' -archive_cmds_need_lc='`$ECHO "$archive_cmds_need_lc" | $SED "$delay_single_quote_subst"`' -enable_shared_with_static_runtimes='`$ECHO "$enable_shared_with_static_runtimes" | $SED "$delay_single_quote_subst"`' -export_dynamic_flag_spec='`$ECHO "$export_dynamic_flag_spec" | $SED "$delay_single_quote_subst"`' -whole_archive_flag_spec='`$ECHO "$whole_archive_flag_spec" | $SED "$delay_single_quote_subst"`' -compiler_needs_object='`$ECHO "$compiler_needs_object" | $SED "$delay_single_quote_subst"`' -old_archive_from_new_cmds='`$ECHO "$old_archive_from_new_cmds" | $SED "$delay_single_quote_subst"`' -old_archive_from_expsyms_cmds='`$ECHO "$old_archive_from_expsyms_cmds" | $SED "$delay_single_quote_subst"`' -archive_cmds='`$ECHO "$archive_cmds" | $SED "$delay_single_quote_subst"`' -archive_expsym_cmds='`$ECHO "$archive_expsym_cmds" | $SED "$delay_single_quote_subst"`' -module_cmds='`$ECHO "$module_cmds" | $SED "$delay_single_quote_subst"`' -module_expsym_cmds='`$ECHO "$module_expsym_cmds" | $SED "$delay_single_quote_subst"`' -with_gnu_ld='`$ECHO "$with_gnu_ld" | $SED "$delay_single_quote_subst"`' -allow_undefined_flag='`$ECHO "$allow_undefined_flag" | $SED "$delay_single_quote_subst"`' -no_undefined_flag='`$ECHO "$no_undefined_flag" | $SED "$delay_single_quote_subst"`' -hardcode_libdir_flag_spec='`$ECHO "$hardcode_libdir_flag_spec" | $SED "$delay_single_quote_subst"`' -hardcode_libdir_separator='`$ECHO "$hardcode_libdir_separator" | $SED "$delay_single_quote_subst"`' -hardcode_direct='`$ECHO "$hardcode_direct" | $SED "$delay_single_quote_subst"`' -hardcode_direct_absolute='`$ECHO "$hardcode_direct_absolute" | $SED "$delay_single_quote_subst"`' -hardcode_minus_L='`$ECHO "$hardcode_minus_L" | $SED "$delay_single_quote_subst"`' -hardcode_shlibpath_var='`$ECHO "$hardcode_shlibpath_var" | $SED "$delay_single_quote_subst"`' -hardcode_automatic='`$ECHO "$hardcode_automatic" | $SED "$delay_single_quote_subst"`' -inherit_rpath='`$ECHO "$inherit_rpath" | $SED "$delay_single_quote_subst"`' -link_all_deplibs='`$ECHO "$link_all_deplibs" | $SED "$delay_single_quote_subst"`' -always_export_symbols='`$ECHO "$always_export_symbols" | $SED "$delay_single_quote_subst"`' -export_symbols_cmds='`$ECHO "$export_symbols_cmds" | $SED "$delay_single_quote_subst"`' -exclude_expsyms='`$ECHO "$exclude_expsyms" | $SED "$delay_single_quote_subst"`' -include_expsyms='`$ECHO "$include_expsyms" | $SED "$delay_single_quote_subst"`' -prelink_cmds='`$ECHO "$prelink_cmds" | $SED "$delay_single_quote_subst"`' -postlink_cmds='`$ECHO "$postlink_cmds" | $SED "$delay_single_quote_subst"`' -file_list_spec='`$ECHO "$file_list_spec" | $SED "$delay_single_quote_subst"`' -variables_saved_for_relink='`$ECHO "$variables_saved_for_relink" | $SED "$delay_single_quote_subst"`' -need_lib_prefix='`$ECHO "$need_lib_prefix" | $SED "$delay_single_quote_subst"`' -need_version='`$ECHO "$need_version" | $SED "$delay_single_quote_subst"`' -version_type='`$ECHO "$version_type" | $SED "$delay_single_quote_subst"`' -runpath_var='`$ECHO "$runpath_var" | $SED "$delay_single_quote_subst"`' -shlibpath_var='`$ECHO "$shlibpath_var" | $SED "$delay_single_quote_subst"`' -shlibpath_overrides_runpath='`$ECHO "$shlibpath_overrides_runpath" | $SED "$delay_single_quote_subst"`' -libname_spec='`$ECHO "$libname_spec" | $SED "$delay_single_quote_subst"`' -library_names_spec='`$ECHO "$library_names_spec" | $SED "$delay_single_quote_subst"`' -soname_spec='`$ECHO "$soname_spec" | $SED "$delay_single_quote_subst"`' -install_override_mode='`$ECHO "$install_override_mode" | $SED "$delay_single_quote_subst"`' -postinstall_cmds='`$ECHO "$postinstall_cmds" | $SED "$delay_single_quote_subst"`' -postuninstall_cmds='`$ECHO "$postuninstall_cmds" | $SED "$delay_single_quote_subst"`' -finish_cmds='`$ECHO "$finish_cmds" | $SED "$delay_single_quote_subst"`' -finish_eval='`$ECHO "$finish_eval" | $SED "$delay_single_quote_subst"`' -hardcode_into_libs='`$ECHO "$hardcode_into_libs" | $SED "$delay_single_quote_subst"`' -sys_lib_search_path_spec='`$ECHO "$sys_lib_search_path_spec" | $SED "$delay_single_quote_subst"`' -configure_time_dlsearch_path='`$ECHO "$configure_time_dlsearch_path" | $SED "$delay_single_quote_subst"`' -configure_time_lt_sys_library_path='`$ECHO "$configure_time_lt_sys_library_path" | $SED "$delay_single_quote_subst"`' -hardcode_action='`$ECHO "$hardcode_action" | $SED "$delay_single_quote_subst"`' -enable_dlopen='`$ECHO "$enable_dlopen" | $SED "$delay_single_quote_subst"`' -enable_dlopen_self='`$ECHO "$enable_dlopen_self" | $SED "$delay_single_quote_subst"`' -enable_dlopen_self_static='`$ECHO "$enable_dlopen_self_static" | $SED "$delay_single_quote_subst"`' -old_striplib='`$ECHO "$old_striplib" | $SED "$delay_single_quote_subst"`' -striplib='`$ECHO "$striplib" | $SED "$delay_single_quote_subst"`' - -LTCC='$LTCC' -LTCFLAGS='$LTCFLAGS' -compiler='$compiler_DEFAULT' - -# A function that is used when there is no print builtin or printf. -func_fallback_echo () -{ - eval 'cat <<_LTECHO_EOF -\$1 -_LTECHO_EOF' -} - -# Quote evaled strings. -for var in SED \ -GREP \ -EGREP \ -FGREP \ -SHELL \ -ECHO \ -LD \ -AS \ -DLLTOOL \ -OBJDUMP \ -PATH_SEPARATOR \ -NM \ -LN_S \ -lt_SP2NL \ -lt_NL2SP \ -reload_flag \ -deplibs_check_method \ -file_magic_cmd \ -file_magic_glob \ -want_nocaseglob \ -sharedlib_from_linklib_cmd \ -AR \ -AR_FLAGS \ -archiver_list_spec \ -STRIP \ -RANLIB \ -CC \ -CFLAGS \ -compiler \ -lt_cv_sys_global_symbol_pipe \ -lt_cv_sys_global_symbol_to_cdecl \ -lt_cv_sys_global_symbol_to_import \ -lt_cv_sys_global_symbol_to_c_name_address \ -lt_cv_sys_global_symbol_to_c_name_address_lib_prefix \ -lt_cv_nm_interface \ -nm_file_list_spec \ -lt_cv_truncate_bin \ -lt_prog_compiler_no_builtin_flag \ -lt_prog_compiler_pic \ -lt_prog_compiler_wl \ -lt_prog_compiler_static \ -lt_cv_prog_compiler_c_o \ -need_locks \ -MANIFEST_TOOL \ -DSYMUTIL \ -NMEDIT \ -LIPO \ -OTOOL \ -OTOOL64 \ -shrext_cmds \ -export_dynamic_flag_spec \ -whole_archive_flag_spec \ -compiler_needs_object \ -with_gnu_ld \ -allow_undefined_flag \ -no_undefined_flag \ -hardcode_libdir_flag_spec \ -hardcode_libdir_separator \ -exclude_expsyms \ -include_expsyms \ -file_list_spec \ -variables_saved_for_relink \ -libname_spec \ -library_names_spec \ -soname_spec \ -install_override_mode \ -finish_eval \ -old_striplib \ -striplib; do - case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in - *[\\\\\\\`\\"\\\$]*) - eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED \\"\\\$sed_quote_subst\\"\\\`\\\\\\"" ## exclude from sc_prohibit_nested_quotes - ;; - *) - eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\"" - ;; - esac -done - -# Double-quote double-evaled strings. -for var in reload_cmds \ -old_postinstall_cmds \ -old_postuninstall_cmds \ -old_archive_cmds \ -extract_expsyms_cmds \ -old_archive_from_new_cmds \ -old_archive_from_expsyms_cmds \ -archive_cmds \ -archive_expsym_cmds \ -module_cmds \ -module_expsym_cmds \ -export_symbols_cmds \ -prelink_cmds \ -postlink_cmds \ -postinstall_cmds \ -postuninstall_cmds \ -finish_cmds \ -sys_lib_search_path_spec \ -configure_time_dlsearch_path \ -configure_time_lt_sys_library_path; do - case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in - *[\\\\\\\`\\"\\\$]*) - eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\"" ## exclude from sc_prohibit_nested_quotes - ;; - *) - eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\"" - ;; - esac -done - -ac_aux_dir='$ac_aux_dir' - -# See if we are running on zsh, and set the options that allow our -# commands through without removal of \ escapes INIT. -if test -n "\${ZSH_VERSION+set}"; then - setopt NO_GLOB_SUBST -fi - - - PACKAGE='$PACKAGE' - VERSION='$VERSION' - RM='$RM' - ofile='$ofile' - - - - -_ACEOF - -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 - -# Handling of arguments. -for ac_config_target in $ac_config_targets -do - case $ac_config_target in - "config.h") CONFIG_HEADERS="$CONFIG_HEADERS config.h" ;; - "depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;; - "libtool") CONFIG_COMMANDS="$CONFIG_COMMANDS libtool" ;; - "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;; - "libpng.pc") CONFIG_FILES="$CONFIG_FILES libpng.pc:libpng.pc.in" ;; - "libpng-config") CONFIG_FILES="$CONFIG_FILES libpng-config:libpng-config.in" ;; - - *) as_fn_error $? "invalid argument: \`$ac_config_target'" "$LINENO" 5;; - esac -done - - -# If the user did not use the arguments to specify the items to instantiate, -# then the envvar interface is used. Set only those that are not. -# We use the long form for the default assignment because of an extremely -# bizarre bug on SunOS 4.1.3. -if $ac_need_defaults; then - test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files - test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers - test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands -fi - -# Have a temporary directory for convenience. Make it in the build tree -# simply because there is no reason against having it here, and in addition, -# creating and moving files from /tmp can sometimes cause problems. -# Hook for its removal unless debugging. -# Note that there is a small window in which the directory will not be cleaned: -# after its creation but before its name has been assigned to `$tmp'. -$debug || -{ - tmp= ac_tmp= - trap 'exit_status=$? - : "${ac_tmp:=$tmp}" - { test ! -d "$ac_tmp" || rm -fr "$ac_tmp"; } && exit $exit_status -' 0 - trap 'as_fn_exit 1' 1 2 13 15 -} -# Create a (secure) tmp directory for tmp files. - -{ - tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` && - test -d "$tmp" -} || -{ - tmp=./conf$$-$RANDOM - (umask 077 && mkdir "$tmp") -} || as_fn_error $? "cannot create a temporary directory in ." "$LINENO" 5 -ac_tmp=$tmp - -# Set up the scripts for CONFIG_FILES section. -# No need to generate them if there are no CONFIG_FILES. -# This happens for instance with `./config.status config.h'. -if test -n "$CONFIG_FILES"; then - - -ac_cr=`echo X | tr X '\015'` -# On cygwin, bash can eat \r inside `` if the user requested igncr. -# But we know of no other shell where ac_cr would be empty at this -# point, so we can use a bashism as a fallback. -if test "x$ac_cr" = x; then - eval ac_cr=\$\'\\r\' -fi -ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' /dev/null` -if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then - ac_cs_awk_cr='\\r' -else - ac_cs_awk_cr=$ac_cr -fi - -echo 'BEGIN {' >"$ac_tmp/subs1.awk" && -_ACEOF - - -{ - echo "cat >conf$$subs.awk <<_ACEOF" && - echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' && - echo "_ACEOF" -} >conf$$subs.sh || - as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 -ac_delim_num=`echo "$ac_subst_vars" | grep -c '^'` -ac_delim='%!_!# ' -for ac_last_try in false false false false false :; do - . ./conf$$subs.sh || - as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 - - ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X` - if test $ac_delim_n = $ac_delim_num; then - break - elif $ac_last_try; then - as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 - else - ac_delim="$ac_delim!$ac_delim _$ac_delim!! " - fi -done -rm -f conf$$subs.sh - -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -cat >>"\$ac_tmp/subs1.awk" <<\\_ACAWK && -_ACEOF -sed -n ' -h -s/^/S["/; s/!.*/"]=/ -p -g -s/^[^!]*!// -:repl -t repl -s/'"$ac_delim"'$// -t delim -:nl -h -s/\(.\{148\}\)..*/\1/ -t more1 -s/["\\]/\\&/g; s/^/"/; s/$/\\n"\\/ -p -n -b repl -:more1 -s/["\\]/\\&/g; s/^/"/; s/$/"\\/ -p -g -s/.\{148\}// -t nl -:delim -h -s/\(.\{148\}\)..*/\1/ -t more2 -s/["\\]/\\&/g; s/^/"/; s/$/"/ -p -b -:more2 -s/["\\]/\\&/g; s/^/"/; s/$/"\\/ -p -g -s/.\{148\}// -t delim -' >$CONFIG_STATUS || ac_write_fail=1 -rm -f conf$$subs.awk -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -_ACAWK -cat >>"\$ac_tmp/subs1.awk" <<_ACAWK && - for (key in S) S_is_set[key] = 1 - FS = "" - -} -{ - line = $ 0 - nfields = split(line, field, "@") - substed = 0 - len = length(field[1]) - for (i = 2; i < nfields; i++) { - key = field[i] - keylen = length(key) - if (S_is_set[key]) { - value = S[key] - line = substr(line, 1, len) "" value "" substr(line, len + keylen + 3) - len += length(value) + length(field[++i]) - substed = 1 - } else - len += 1 + keylen - } - - print line -} - -_ACAWK -_ACEOF -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then - sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g" -else - cat -fi < "$ac_tmp/subs1.awk" > "$ac_tmp/subs.awk" \ - || as_fn_error $? "could not setup config files machinery" "$LINENO" 5 -_ACEOF - -# VPATH may cause trouble with some makes, so we remove sole $(srcdir), -# ${srcdir} and @srcdir@ entries from VPATH if srcdir is ".", strip leading and -# trailing colons and then remove the whole line if VPATH becomes empty -# (actually we leave an empty line to preserve line numbers). -if test "x$srcdir" = x.; then - ac_vpsub='/^[ ]*VPATH[ ]*=[ ]*/{ -h -s/// -s/^/:/ -s/[ ]*$/:/ -s/:\$(srcdir):/:/g -s/:\${srcdir}:/:/g -s/:@srcdir@:/:/g -s/^:*// -s/:*$// -x -s/\(=[ ]*\).*/\1/ -G -s/\n// -s/^[^=]*=[ ]*$// -}' -fi - -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -fi # test -n "$CONFIG_FILES" - -# Set up the scripts for CONFIG_HEADERS section. -# No need to generate them if there are no CONFIG_HEADERS. -# This happens for instance with `./config.status Makefile'. -if test -n "$CONFIG_HEADERS"; then -cat >"$ac_tmp/defines.awk" <<\_ACAWK || -BEGIN { -_ACEOF - -# Transform confdefs.h into an awk script `defines.awk', embedded as -# here-document in config.status, that substitutes the proper values into -# config.h.in to produce config.h. - -# Create a delimiter string that does not exist in confdefs.h, to ease -# handling of long lines. -ac_delim='%!_!# ' -for ac_last_try in false false :; do - ac_tt=`sed -n "/$ac_delim/p" confdefs.h` - if test -z "$ac_tt"; then - break - elif $ac_last_try; then - as_fn_error $? "could not make $CONFIG_HEADERS" "$LINENO" 5 - else - ac_delim="$ac_delim!$ac_delim _$ac_delim!! " - fi -done - -# For the awk script, D is an array of macro values keyed by name, -# likewise P contains macro parameters if any. Preserve backslash -# newline sequences. - -ac_word_re=[_$as_cr_Letters][_$as_cr_alnum]* -sed -n ' -s/.\{148\}/&'"$ac_delim"'/g -t rset -:rset -s/^[ ]*#[ ]*define[ ][ ]*/ / -t def -d -:def -s/\\$// -t bsnl -s/["\\]/\\&/g -s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\ -D["\1"]=" \3"/p -s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2"/p -d -:bsnl -s/["\\]/\\&/g -s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\ -D["\1"]=" \3\\\\\\n"\\/p -t cont -s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2\\\\\\n"\\/p -t cont -d -:cont -n -s/.\{148\}/&'"$ac_delim"'/g -t clear -:clear -s/\\$// -t bsnlc -s/["\\]/\\&/g; s/^/"/; s/$/"/p -d -:bsnlc -s/["\\]/\\&/g; s/^/"/; s/$/\\\\\\n"\\/p -b cont -' >$CONFIG_STATUS || ac_write_fail=1 - -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 - for (key in D) D_is_set[key] = 1 - FS = "" -} -/^[\t ]*#[\t ]*(define|undef)[\t ]+$ac_word_re([\t (]|\$)/ { - line = \$ 0 - split(line, arg, " ") - if (arg[1] == "#") { - defundef = arg[2] - mac1 = arg[3] - } else { - defundef = substr(arg[1], 2) - mac1 = arg[2] - } - split(mac1, mac2, "(") #) - macro = mac2[1] - prefix = substr(line, 1, index(line, defundef) - 1) - if (D_is_set[macro]) { - # Preserve the white space surrounding the "#". - print prefix "define", macro P[macro] D[macro] - next - } else { - # Replace #undef with comments. This is necessary, for example, - # in the case of _POSIX_SOURCE, which is predefined and required - # on some systems where configure will not decide to define it. - if (defundef == "undef") { - print "/*", prefix defundef, macro, "*/" - next - } - } -} -{ print } -_ACAWK -_ACEOF -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 - as_fn_error $? "could not setup config headers machinery" "$LINENO" 5 -fi # test -n "$CONFIG_HEADERS" - - -eval set X " :F $CONFIG_FILES :H $CONFIG_HEADERS :C $CONFIG_COMMANDS" -shift -for ac_tag -do - case $ac_tag in - :[FHLC]) ac_mode=$ac_tag; continue;; - esac - case $ac_mode$ac_tag in - :[FHL]*:*);; - :L* | :C*:*) as_fn_error $? "invalid tag \`$ac_tag'" "$LINENO" 5;; - :[FH]-) ac_tag=-:-;; - :[FH]*) ac_tag=$ac_tag:$ac_tag.in;; - esac - ac_save_IFS=$IFS - IFS=: - set x $ac_tag - IFS=$ac_save_IFS - shift - ac_file=$1 - shift - - case $ac_mode in - :L) ac_source=$1;; - :[FH]) - ac_file_inputs= - for ac_f - do - case $ac_f in - -) ac_f="$ac_tmp/stdin";; - *) # Look for the file first in the build tree, then in the source tree - # (if the path is not absolute). The absolute path cannot be DOS-style, - # because $ac_f cannot contain `:'. - test -f "$ac_f" || - case $ac_f in - [\\/$]*) false;; - *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";; - esac || - as_fn_error 1 "cannot find input file: \`$ac_f'" "$LINENO" 5;; - esac - case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac - as_fn_append ac_file_inputs " '$ac_f'" - done - - # Let's still pretend it is `configure' which instantiates (i.e., don't - # use $as_me), people would be surprised to read: - # /* config.h. Generated by config.status. */ - configure_input='Generated from '` - $as_echo "$*" | sed 's|^[^:]*/||;s|:[^:]*/|, |g' - `' by configure.' - if test x"$ac_file" != x-; then - configure_input="$ac_file. $configure_input" - { $as_echo "$as_me:${as_lineno-$LINENO}: creating $ac_file" >&5 -$as_echo "$as_me: creating $ac_file" >&6;} - fi - # Neutralize special characters interpreted by sed in replacement strings. - case $configure_input in #( - *\&* | *\|* | *\\* ) - ac_sed_conf_input=`$as_echo "$configure_input" | - sed 's/[\\\\&|]/\\\\&/g'`;; #( - *) ac_sed_conf_input=$configure_input;; - esac - - case $ac_tag in - *:-:* | *:-) cat >"$ac_tmp/stdin" \ - || as_fn_error $? "could not create $ac_file" "$LINENO" 5 ;; - esac - ;; - esac - - ac_dir=`$as_dirname -- "$ac_file" || -$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$ac_file" : 'X\(//\)[^/]' \| \ - X"$ac_file" : 'X\(//\)$' \| \ - X"$ac_file" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X"$ac_file" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - as_dir="$ac_dir"; as_fn_mkdir_p - ac_builddir=. - -case "$ac_dir" in -.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; -*) - ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'` - # A ".." for each directory in $ac_dir_suffix. - ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` - case $ac_top_builddir_sub in - "") ac_top_builddir_sub=. ac_top_build_prefix= ;; - *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; - esac ;; -esac -ac_abs_top_builddir=$ac_pwd -ac_abs_builddir=$ac_pwd$ac_dir_suffix -# for backward compatibility: -ac_top_builddir=$ac_top_build_prefix - -case $srcdir in - .) # We are building in place. - ac_srcdir=. - ac_top_srcdir=$ac_top_builddir_sub - ac_abs_top_srcdir=$ac_pwd ;; - [\\/]* | ?:[\\/]* ) # Absolute name. - ac_srcdir=$srcdir$ac_dir_suffix; - ac_top_srcdir=$srcdir - ac_abs_top_srcdir=$srcdir ;; - *) # Relative name. - ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix - ac_top_srcdir=$ac_top_build_prefix$srcdir - ac_abs_top_srcdir=$ac_pwd/$srcdir ;; -esac -ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix - - - case $ac_mode in - :F) - # - # CONFIG_FILE - # - - case $INSTALL in - [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;; - *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;; - esac - ac_MKDIR_P=$MKDIR_P - case $MKDIR_P in - [\\/$]* | ?:[\\/]* ) ;; - */*) ac_MKDIR_P=$ac_top_build_prefix$MKDIR_P ;; - esac -_ACEOF - -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -# If the template does not know about datarootdir, expand it. -# FIXME: This hack should be removed a few years after 2.60. -ac_datarootdir_hack=; ac_datarootdir_seen= -ac_sed_dataroot=' -/datarootdir/ { - p - q -} -/@datadir@/p -/@docdir@/p -/@infodir@/p -/@localedir@/p -/@mandir@/p' -case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in -*datarootdir*) ac_datarootdir_seen=yes;; -*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*) - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5 -$as_echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;} -_ACEOF -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 - ac_datarootdir_hack=' - s&@datadir@&$datadir&g - s&@docdir@&$docdir&g - s&@infodir@&$infodir&g - s&@localedir@&$localedir&g - s&@mandir@&$mandir&g - s&\\\${datarootdir}&$datarootdir&g' ;; -esac -_ACEOF - -# Neutralize VPATH when `$srcdir' = `.'. -# Shell code in configure.ac might set extrasub. -# FIXME: do we really want to maintain this feature? -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -ac_sed_extra="$ac_vpsub -$extrasub -_ACEOF -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -:t -/@[a-zA-Z_][a-zA-Z_0-9]*@/!b -s|@configure_input@|$ac_sed_conf_input|;t t -s&@top_builddir@&$ac_top_builddir_sub&;t t -s&@top_build_prefix@&$ac_top_build_prefix&;t t -s&@srcdir@&$ac_srcdir&;t t -s&@abs_srcdir@&$ac_abs_srcdir&;t t -s&@top_srcdir@&$ac_top_srcdir&;t t -s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t -s&@builddir@&$ac_builddir&;t t -s&@abs_builddir@&$ac_abs_builddir&;t t -s&@abs_top_builddir@&$ac_abs_top_builddir&;t t -s&@INSTALL@&$ac_INSTALL&;t t -s&@MKDIR_P@&$ac_MKDIR_P&;t t -$ac_datarootdir_hack -" -eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$ac_tmp/subs.awk" \ - >$ac_tmp/out || as_fn_error $? "could not create $ac_file" "$LINENO" 5 - -test -z "$ac_datarootdir_hack$ac_datarootdir_seen" && - { ac_out=`sed -n '/\${datarootdir}/p' "$ac_tmp/out"`; test -n "$ac_out"; } && - { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' \ - "$ac_tmp/out"`; test -z "$ac_out"; } && - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file contains a reference to the variable \`datarootdir' -which seems to be undefined. Please make sure it is defined" >&5 -$as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir' -which seems to be undefined. Please make sure it is defined" >&2;} - - rm -f "$ac_tmp/stdin" - case $ac_file in - -) cat "$ac_tmp/out" && rm -f "$ac_tmp/out";; - *) rm -f "$ac_file" && mv "$ac_tmp/out" "$ac_file";; - esac \ - || as_fn_error $? "could not create $ac_file" "$LINENO" 5 - ;; - :H) - # - # CONFIG_HEADER - # - if test x"$ac_file" != x-; then - { - $as_echo "/* $configure_input */" \ - && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs" - } >"$ac_tmp/config.h" \ - || as_fn_error $? "could not create $ac_file" "$LINENO" 5 - if diff "$ac_file" "$ac_tmp/config.h" >/dev/null 2>&1; then - { $as_echo "$as_me:${as_lineno-$LINENO}: $ac_file is unchanged" >&5 -$as_echo "$as_me: $ac_file is unchanged" >&6;} - else - rm -f "$ac_file" - mv "$ac_tmp/config.h" "$ac_file" \ - || as_fn_error $? "could not create $ac_file" "$LINENO" 5 - fi - else - $as_echo "/* $configure_input */" \ - && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs" \ - || as_fn_error $? "could not create -" "$LINENO" 5 - fi -# Compute "$ac_file"'s index in $config_headers. -_am_arg="$ac_file" -_am_stamp_count=1 -for _am_header in $config_headers :; do - case $_am_header in - $_am_arg | $_am_arg:* ) - break ;; - * ) - _am_stamp_count=`expr $_am_stamp_count + 1` ;; - esac -done -echo "timestamp for $_am_arg" >`$as_dirname -- "$_am_arg" || -$as_expr X"$_am_arg" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$_am_arg" : 'X\(//\)[^/]' \| \ - X"$_am_arg" : 'X\(//\)$' \| \ - X"$_am_arg" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X"$_am_arg" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'`/stamp-h$_am_stamp_count - ;; - - :C) { $as_echo "$as_me:${as_lineno-$LINENO}: executing $ac_file commands" >&5 -$as_echo "$as_me: executing $ac_file commands" >&6;} - ;; - esac - - - case $ac_file$ac_mode in - "depfiles":C) test x"$AMDEP_TRUE" != x"" || { - # Older Autoconf quotes --file arguments for eval, but not when files - # are listed without --file. Let's play safe and only enable the eval - # if we detect the quoting. - # TODO: see whether this extra hack can be removed once we start - # requiring Autoconf 2.70 or later. - case $CONFIG_FILES in #( - *\'*) : - eval set x "$CONFIG_FILES" ;; #( - *) : - set x $CONFIG_FILES ;; #( - *) : - ;; -esac - shift - # Used to flag and report bootstrapping failures. - am_rc=0 - for am_mf - do - # Strip MF so we end up with the name of the file. - am_mf=`$as_echo "$am_mf" | sed -e 's/:.*$//'` - # Check whether this is an Automake generated Makefile which includes - # dependency-tracking related rules and includes. - # Grep'ing the whole file directly is not great: AIX grep has a line - # limit of 2048, but all sed's we know have understand at least 4000. - sed -n 's,^am--depfiles:.*,X,p' "$am_mf" | grep X >/dev/null 2>&1 \ - || continue - am_dirpart=`$as_dirname -- "$am_mf" || -$as_expr X"$am_mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$am_mf" : 'X\(//\)[^/]' \| \ - X"$am_mf" : 'X\(//\)$' \| \ - X"$am_mf" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X"$am_mf" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - am_filepart=`$as_basename -- "$am_mf" || -$as_expr X/"$am_mf" : '.*/\([^/][^/]*\)/*$' \| \ - X"$am_mf" : 'X\(//\)$' \| \ - X"$am_mf" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X/"$am_mf" | - sed '/^.*\/\([^/][^/]*\)\/*$/{ - s//\1/ - q - } - /^X\/\(\/\/\)$/{ - s//\1/ - q - } - /^X\/\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - { echo "$as_me:$LINENO: cd "$am_dirpart" \ - && sed -e '/# am--include-marker/d' "$am_filepart" \ - | $MAKE -f - am--depfiles" >&5 - (cd "$am_dirpart" \ - && sed -e '/# am--include-marker/d' "$am_filepart" \ - | $MAKE -f - am--depfiles) >&5 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } || am_rc=$? - done - if test $am_rc -ne 0; then - { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error $? "Something went wrong bootstrapping makefile fragments - for automatic dependency tracking. Try re-running configure with the - '--disable-dependency-tracking' option to at least be able to build - the package (albeit without support for automatic dependency tracking). -See \`config.log' for more details" "$LINENO" 5; } - fi - { am_dirpart=; unset am_dirpart;} - { am_filepart=; unset am_filepart;} - { am_mf=; unset am_mf;} - { am_rc=; unset am_rc;} - rm -f conftest-deps.mk -} - ;; - "libtool":C) - - # See if we are running on zsh, and set the options that allow our - # commands through without removal of \ escapes. - if test -n "${ZSH_VERSION+set}"; then - setopt NO_GLOB_SUBST - fi - - cfgfile=${ofile}T - trap "$RM \"$cfgfile\"; exit 1" 1 2 15 - $RM "$cfgfile" - - cat <<_LT_EOF >> "$cfgfile" -#! $SHELL -# Generated automatically by $as_me ($PACKAGE) $VERSION -# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: -# NOTE: Changes made to this file will be lost: look at ltmain.sh. - -# Provide generalized library-building support services. -# Written by Gordon Matzigkeit, 1996 - -# Copyright (C) 2014 Free Software Foundation, Inc. -# This is free software; see the source for copying conditions. There is NO -# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. - -# GNU Libtool is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of of the License, or -# (at your option) any later version. -# -# As a special exception to the GNU General Public License, if you -# distribute this file as part of a program or library that is built -# using GNU Libtool, you may include this file under the same -# distribution terms that you use for the rest of that program. -# -# GNU Libtool is distributed in the hope that it will be useful, but -# WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program. If not, see . - - -# The names of the tagged configurations supported by this script. -available_tags='' - -# Configured defaults for sys_lib_dlsearch_path munging. -: \${LT_SYS_LIBRARY_PATH="$configure_time_lt_sys_library_path"} - -# ### BEGIN LIBTOOL CONFIG - -# A sed program that does not truncate output. -SED=$lt_SED - -# Sed that helps us avoid accidentally triggering echo(1) options like -n. -Xsed="\$SED -e 1s/^X//" - -# A grep program that handles long lines. -GREP=$lt_GREP - -# An ERE matcher. -EGREP=$lt_EGREP - -# A literal string matcher. -FGREP=$lt_FGREP - -# Shell to use when invoking shell scripts. -SHELL=$lt_SHELL - -# An echo program that protects backslashes. -ECHO=$lt_ECHO - -# Which release of libtool.m4 was used? -macro_version=$macro_version -macro_revision=$macro_revision - -# Assembler program. -AS=$lt_AS - -# DLL creation program. -DLLTOOL=$lt_DLLTOOL - -# Object dumper program. -OBJDUMP=$lt_OBJDUMP - -# Whether or not to build shared libraries. -build_libtool_libs=$enable_shared - -# Whether or not to build static libraries. -build_old_libs=$enable_static - -# What type of objects to build. -pic_mode=$pic_mode - -# Whether or not to optimize for fast installation. -fast_install=$enable_fast_install - -# Shared archive member basename,for filename based shared library versioning on AIX. -shared_archive_member_spec=$shared_archive_member_spec - -# The PATH separator for the build system. -PATH_SEPARATOR=$lt_PATH_SEPARATOR - -# The host system. -host_alias=$host_alias -host=$host -host_os=$host_os - -# The build system. -build_alias=$build_alias -build=$build -build_os=$build_os - -# A BSD- or MS-compatible name lister. -NM=$lt_NM - -# Whether we need soft or hard links. -LN_S=$lt_LN_S - -# What is the maximum length of a command? -max_cmd_len=$max_cmd_len - -# Object file suffix (normally "o"). -objext=$ac_objext - -# Executable file suffix (normally ""). -exeext=$exeext - -# whether the shell understands "unset". -lt_unset=$lt_unset - -# turn spaces into newlines. -SP2NL=$lt_lt_SP2NL - -# turn newlines into spaces. -NL2SP=$lt_lt_NL2SP - -# convert \$build file names to \$host format. -to_host_file_cmd=$lt_cv_to_host_file_cmd - -# convert \$build files to toolchain format. -to_tool_file_cmd=$lt_cv_to_tool_file_cmd - -# Method to check whether dependent libraries are shared objects. -deplibs_check_method=$lt_deplibs_check_method - -# Command to use when deplibs_check_method = "file_magic". -file_magic_cmd=$lt_file_magic_cmd - -# How to find potential files when deplibs_check_method = "file_magic". -file_magic_glob=$lt_file_magic_glob - -# Find potential files using nocaseglob when deplibs_check_method = "file_magic". -want_nocaseglob=$lt_want_nocaseglob - -# Command to associate shared and link libraries. -sharedlib_from_linklib_cmd=$lt_sharedlib_from_linklib_cmd - -# The archiver. -AR=$lt_AR - -# Flags to create an archive. -AR_FLAGS=$lt_AR_FLAGS - -# How to feed a file listing to the archiver. -archiver_list_spec=$lt_archiver_list_spec - -# A symbol stripping program. -STRIP=$lt_STRIP - -# Commands used to install an old-style archive. -RANLIB=$lt_RANLIB -old_postinstall_cmds=$lt_old_postinstall_cmds -old_postuninstall_cmds=$lt_old_postuninstall_cmds - -# Whether to use a lock for old archive extraction. -lock_old_archive_extraction=$lock_old_archive_extraction - -# A C compiler. -LTCC=$lt_CC - -# LTCC compiler flags. -LTCFLAGS=$lt_CFLAGS - -# Take the output of nm and produce a listing of raw symbols and C names. -global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe - -# Transform the output of nm in a proper C declaration. -global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl - -# Transform the output of nm into a list of symbols to manually relocate. -global_symbol_to_import=$lt_lt_cv_sys_global_symbol_to_import - -# Transform the output of nm in a C name address pair. -global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address - -# Transform the output of nm in a C name address pair when lib prefix is needed. -global_symbol_to_c_name_address_lib_prefix=$lt_lt_cv_sys_global_symbol_to_c_name_address_lib_prefix - -# The name lister interface. -nm_interface=$lt_lt_cv_nm_interface - -# Specify filename containing input files for \$NM. -nm_file_list_spec=$lt_nm_file_list_spec - -# The root where to search for dependent libraries,and where our libraries should be installed. -lt_sysroot=$lt_sysroot - -# Command to truncate a binary pipe. -lt_truncate_bin=$lt_lt_cv_truncate_bin - -# The name of the directory that contains temporary libtool files. -objdir=$objdir - -# Used to examine libraries when file_magic_cmd begins with "file". -MAGIC_CMD=$MAGIC_CMD - -# Must we lock files when doing compilation? -need_locks=$lt_need_locks - -# Manifest tool. -MANIFEST_TOOL=$lt_MANIFEST_TOOL - -# Tool to manipulate archived DWARF debug symbol files on Mac OS X. -DSYMUTIL=$lt_DSYMUTIL - -# Tool to change global to local symbols on Mac OS X. -NMEDIT=$lt_NMEDIT - -# Tool to manipulate fat objects and archives on Mac OS X. -LIPO=$lt_LIPO - -# ldd/readelf like tool for Mach-O binaries on Mac OS X. -OTOOL=$lt_OTOOL - -# ldd/readelf like tool for 64 bit Mach-O binaries on Mac OS X 10.4. -OTOOL64=$lt_OTOOL64 - -# Old archive suffix (normally "a"). -libext=$libext - -# Shared library suffix (normally ".so"). -shrext_cmds=$lt_shrext_cmds - -# The commands to extract the exported symbol list from a shared archive. -extract_expsyms_cmds=$lt_extract_expsyms_cmds - -# Variables whose values should be saved in libtool wrapper scripts and -# restored at link time. -variables_saved_for_relink=$lt_variables_saved_for_relink - -# Do we need the "lib" prefix for modules? -need_lib_prefix=$need_lib_prefix - -# Do we need a version for libraries? -need_version=$need_version - -# Library versioning type. -version_type=$version_type - -# Shared library runtime path variable. -runpath_var=$runpath_var - -# Shared library path variable. -shlibpath_var=$shlibpath_var - -# Is shlibpath searched before the hard-coded library search path? -shlibpath_overrides_runpath=$shlibpath_overrides_runpath - -# Format of library name prefix. -libname_spec=$lt_libname_spec - -# List of archive names. First name is the real one, the rest are links. -# The last name is the one that the linker finds with -lNAME -library_names_spec=$lt_library_names_spec - -# The coded name of the library, if different from the real name. -soname_spec=$lt_soname_spec - -# Permission mode override for installation of shared libraries. -install_override_mode=$lt_install_override_mode - -# Command to use after installation of a shared archive. -postinstall_cmds=$lt_postinstall_cmds - -# Command to use after uninstallation of a shared archive. -postuninstall_cmds=$lt_postuninstall_cmds - -# Commands used to finish a libtool library installation in a directory. -finish_cmds=$lt_finish_cmds - -# As "finish_cmds", except a single script fragment to be evaled but -# not shown. -finish_eval=$lt_finish_eval - -# Whether we should hardcode library paths into libraries. -hardcode_into_libs=$hardcode_into_libs - -# Compile-time system search path for libraries. -sys_lib_search_path_spec=$lt_sys_lib_search_path_spec - -# Detected run-time system search path for libraries. -sys_lib_dlsearch_path_spec=$lt_configure_time_dlsearch_path - -# Explicit LT_SYS_LIBRARY_PATH set during ./configure time. -configure_time_lt_sys_library_path=$lt_configure_time_lt_sys_library_path - -# Whether dlopen is supported. -dlopen_support=$enable_dlopen - -# Whether dlopen of programs is supported. -dlopen_self=$enable_dlopen_self - -# Whether dlopen of statically linked programs is supported. -dlopen_self_static=$enable_dlopen_self_static - -# Commands to strip libraries. -old_striplib=$lt_old_striplib -striplib=$lt_striplib - - -# The linker used to build libraries. -LD=$lt_LD - -# How to create reloadable object files. -reload_flag=$lt_reload_flag -reload_cmds=$lt_reload_cmds - -# Commands used to build an old-style archive. -old_archive_cmds=$lt_old_archive_cmds - -# A language specific compiler. -CC=$lt_compiler - -# Is the compiler the GNU compiler? -with_gcc=$GCC - -# Compiler flag to turn off builtin functions. -no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag - -# Additional compiler flags for building library objects. -pic_flag=$lt_lt_prog_compiler_pic - -# How to pass a linker flag through the compiler. -wl=$lt_lt_prog_compiler_wl - -# Compiler flag to prevent dynamic linking. -link_static_flag=$lt_lt_prog_compiler_static - -# Does compiler simultaneously support -c and -o options? -compiler_c_o=$lt_lt_cv_prog_compiler_c_o - -# Whether or not to add -lc for building shared libraries. -build_libtool_need_lc=$archive_cmds_need_lc - -# Whether or not to disallow shared libs when runtime libs are static. -allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes - -# Compiler flag to allow reflexive dlopens. -export_dynamic_flag_spec=$lt_export_dynamic_flag_spec - -# Compiler flag to generate shared objects directly from archives. -whole_archive_flag_spec=$lt_whole_archive_flag_spec - -# Whether the compiler copes with passing no objects directly. -compiler_needs_object=$lt_compiler_needs_object - -# Create an old-style archive from a shared archive. -old_archive_from_new_cmds=$lt_old_archive_from_new_cmds - -# Create a temporary old-style archive to link instead of a shared archive. -old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds - -# Commands used to build a shared archive. -archive_cmds=$lt_archive_cmds -archive_expsym_cmds=$lt_archive_expsym_cmds - -# Commands used to build a loadable module if different from building -# a shared archive. -module_cmds=$lt_module_cmds -module_expsym_cmds=$lt_module_expsym_cmds - -# Whether we are building with GNU ld or not. -with_gnu_ld=$lt_with_gnu_ld - -# Flag that allows shared libraries with undefined symbols to be built. -allow_undefined_flag=$lt_allow_undefined_flag - -# Flag that enforces no undefined symbols. -no_undefined_flag=$lt_no_undefined_flag - -# Flag to hardcode \$libdir into a binary during linking. -# This must work even if \$libdir does not exist -hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec - -# Whether we need a single "-rpath" flag with a separated argument. -hardcode_libdir_separator=$lt_hardcode_libdir_separator - -# Set to "yes" if using DIR/libNAME\$shared_ext during linking hardcodes -# DIR into the resulting binary. -hardcode_direct=$hardcode_direct - -# Set to "yes" if using DIR/libNAME\$shared_ext during linking hardcodes -# DIR into the resulting binary and the resulting library dependency is -# "absolute",i.e impossible to change by setting \$shlibpath_var if the -# library is relocated. -hardcode_direct_absolute=$hardcode_direct_absolute - -# Set to "yes" if using the -LDIR flag during linking hardcodes DIR -# into the resulting binary. -hardcode_minus_L=$hardcode_minus_L - -# Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR -# into the resulting binary. -hardcode_shlibpath_var=$hardcode_shlibpath_var - -# Set to "yes" if building a shared library automatically hardcodes DIR -# into the library and all subsequent libraries and executables linked -# against it. -hardcode_automatic=$hardcode_automatic - -# Set to yes if linker adds runtime paths of dependent libraries -# to runtime path list. -inherit_rpath=$inherit_rpath - -# Whether libtool must link a program against all its dependency libraries. -link_all_deplibs=$link_all_deplibs - -# Set to "yes" if exported symbols are required. -always_export_symbols=$always_export_symbols - -# The commands to list exported symbols. -export_symbols_cmds=$lt_export_symbols_cmds - -# Symbols that should not be listed in the preloaded symbols. -exclude_expsyms=$lt_exclude_expsyms - -# Symbols that must always be exported. -include_expsyms=$lt_include_expsyms - -# Commands necessary for linking programs (against libraries) with templates. -prelink_cmds=$lt_prelink_cmds - -# Commands necessary for finishing linking programs. -postlink_cmds=$lt_postlink_cmds - -# Specify filename containing input files. -file_list_spec=$lt_file_list_spec - -# How to hardcode a shared library path into an executable. -hardcode_action=$hardcode_action - -# ### END LIBTOOL CONFIG - -_LT_EOF - - cat <<'_LT_EOF' >> "$cfgfile" - -# ### BEGIN FUNCTIONS SHARED WITH CONFIGURE - -# func_munge_path_list VARIABLE PATH -# ----------------------------------- -# VARIABLE is name of variable containing _space_ separated list of -# directories to be munged by the contents of PATH, which is string -# having a format: -# "DIR[:DIR]:" -# string "DIR[ DIR]" will be prepended to VARIABLE -# ":DIR[:DIR]" -# string "DIR[ DIR]" will be appended to VARIABLE -# "DIRP[:DIRP]::[DIRA:]DIRA" -# string "DIRP[ DIRP]" will be prepended to VARIABLE and string -# "DIRA[ DIRA]" will be appended to VARIABLE -# "DIR[:DIR]" -# VARIABLE will be replaced by "DIR[ DIR]" -func_munge_path_list () -{ - case x$2 in - x) - ;; - *:) - eval $1=\"`$ECHO $2 | $SED 's/:/ /g'` \$$1\" - ;; - x:*) - eval $1=\"\$$1 `$ECHO $2 | $SED 's/:/ /g'`\" - ;; - *::*) - eval $1=\"\$$1\ `$ECHO $2 | $SED -e 's/.*:://' -e 's/:/ /g'`\" - eval $1=\"`$ECHO $2 | $SED -e 's/::.*//' -e 's/:/ /g'`\ \$$1\" - ;; - *) - eval $1=\"`$ECHO $2 | $SED 's/:/ /g'`\" - ;; - esac -} - - -# Calculate cc_basename. Skip known compiler wrappers and cross-prefix. -func_cc_basename () -{ - for cc_temp in $*""; do - case $cc_temp in - compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; - distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; - \-*) ;; - *) break;; - esac - done - func_cc_basename_result=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"` -} - - -# ### END FUNCTIONS SHARED WITH CONFIGURE - -_LT_EOF - - case $host_os in - aix3*) - cat <<\_LT_EOF >> "$cfgfile" -# AIX sometimes has problems with the GCC collect2 program. For some -# reason, if we set the COLLECT_NAMES environment variable, the problems -# vanish in a puff of smoke. -if test set != "${COLLECT_NAMES+set}"; then - COLLECT_NAMES= - export COLLECT_NAMES -fi -_LT_EOF - ;; - esac - - -ltmain=$ac_aux_dir/ltmain.sh - - - # We use sed instead of cat because bash on DJGPP gets confused if - # if finds mixed CR/LF and LF-only lines. Since sed operates in - # text mode, it properly converts lines to CR/LF. This bash problem - # is reportedly fixed, but why not run on old versions too? - sed '$q' "$ltmain" >> "$cfgfile" \ - || (rm -f "$cfgfile"; exit 1) - - mv -f "$cfgfile" "$ofile" || - (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile") - chmod +x "$ofile" - - ;; - "libpng-config":F) chmod +x libpng-config ;; - - esac -done # for ac_tag - - -as_fn_exit 0 -_ACEOF -ac_clean_files=$ac_clean_files_save - -test $ac_write_fail = 0 || - as_fn_error $? "write failure creating $CONFIG_STATUS" "$LINENO" 5 - - -# configure is writing to config.log, and then calls config.status. -# config.status does its own redirection, appending to config.log. -# Unfortunately, on DOS this fails, as config.log is still kept open -# by configure, so config.status won't be able to write to it; its -# output is simply discarded. So we exec the FD to /dev/null, -# effectively closing config.log, so it can be properly (re)opened and -# appended to by config.status. When coming back to configure, we -# need to make the FD available again. -if test "$no_create" != yes; then - ac_cs_success=: - ac_config_status_args= - test "$silent" = yes && - ac_config_status_args="$ac_config_status_args --quiet" - exec 5>/dev/null - $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false - exec 5>>config.log - # Use ||, not &&, to avoid exiting from the if with $? = 1, which - # would make configure fail if this is the last instruction. - $ac_cs_success || as_fn_exit 1 -fi -if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; then - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: unrecognized options: $ac_unrecognized_opts" >&5 -$as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2;} -fi - diff --git a/contrib/README.txt b/contrib/README.txt deleted file mode 100644 index 97963c6d5..000000000 --- a/contrib/README.txt +++ /dev/null @@ -1,5 +0,0 @@ - -This "contrib" directory contains contributions which are not necessarily under -the libpng license, although all are open source. They are not part of -libpng proper and are not used for building the library, although some are used -for testing the library via "make check". diff --git a/contrib/arm-neon/README b/contrib/arm-neon/README deleted file mode 100644 index b4248cf28..000000000 --- a/contrib/arm-neon/README +++ /dev/null @@ -1,83 +0,0 @@ -OPERATING SYSTEM SPECIFIC ARM NEON DETECTION --------------------------------------------- - -Detection of the ability to execute ARM NEON on an ARM processor requires -operating system support. (The information is not available in user mode.) - -HOW TO USE THIS ---------------- - -This directory contains C code fragments that can be included in arm/arm_init.c -by setting the macro PNG_ARM_NEON_FILE to the file name in "" or <> at build -time. This setting is not recorded in pnglibconf.h and can be changed simply by -rebuilding arm/arm_init.o with the required macro definition. - -For any of this code to be used the ARM NEON code must be enabled and run time -checks must be supported. I.e.: - -#if PNG_ARM_NEON_OPT > 0 -#ifdef PNG_ARM_NEON_CHECK_SUPPORTED - -This is done in a 'configure' build by passing configure the argument: - - --enable-arm-neon=check - -Apart from the basic Linux implementation in contrib/arm-neon/linux.c this code -is unsupported. That means that it is not even compiled on a regular basis and -may be broken in any given minor release. - -FILE FORMAT ------------ - -Each file documents its testing status as of the last time it was tested (which -may have been a long time ago): - -STATUS: one of: - SUPPORTED: This indicates that the file is included in the regularly - performed test builds and bugs are fixed when discovered. - COMPILED: This indicates that the code did compile at least once. See the - more detailed description for the extent to which the result was - successful. - TESTED: This means the code was fully compiled into the libpng test programs - and these were run at least once. - -BUG REPORTS: an email address to which to send reports of problems - -The file is a fragment of C code. It should not define any 'extern' symbols; -everything should be static. It must define the function: - -static int png_have_neon(png_structp png_ptr); - -That function must return 1 if ARM NEON instructions are supported, 0 if not. -It must not execute png_error unless it detects a bug. A png_error will prevent -the reading of the PNG and in the future, writing too. - -BUG REPORTS ------------ - -If you mail a bug report for any file that is not SUPPORTED there may only be -limited response. Consider fixing it and sending a patch to fix the problem - -this is more likely to result in action. - -CONTRIBUTIONS -------------- - -You may send contributions of new implementations to -png-mng-implement@sourceforge.net. Please write code in strict C90 C where -possible. Obviously OS dependencies are to be expected. If you submit code you -must have the authors permission and it must have a license that is acceptable -to the current maintainer; in particular that license must permit modification -and redistribution. - -Please try to make the contribution a single file and give the file a clear and -unambiguous name that identifies the target OS. If multiple files really are -required put them all in a sub-directory. - -You must also be prepared to handle bug reports from users of the code, either -by joining the png-mng-implement mailing list or by providing an email for the -"BUG REPORTS" entry or both. Please make sure that the header of the file -contains the STATUS and BUG REPORTS fields as above. - -Please list the OS requirements as precisely as possible. Ideally you should -also list the environment in which the code has been tested and certainly list -any environments where you suspect it might not work. diff --git a/contrib/arm-neon/android-ndk.c b/contrib/arm-neon/android-ndk.c deleted file mode 100644 index fb3a4898d..000000000 --- a/contrib/arm-neon/android-ndk.c +++ /dev/null @@ -1,39 +0,0 @@ -/* contrib/arm-neon/android-ndk.c - * - * Copyright (c) 2014 Glenn Randers-Pehrson - * Written by John Bowler, 2014. - * Last changed in libpng 1.6.10 [March 6, 2014] - * - * This code is released under the libpng license. - * For conditions of distribution and use, see the disclaimer - * and license in png.h - * - * SEE contrib/arm-neon/README before reporting bugs - * - * STATUS: COMPILED, UNTESTED - * BUG REPORTS: png-mng-implement@sourceforge.net - * - * png_have_neon implemented for the Android NDK, see: - * - * Documentation: - * http://www.kandroid.org/ndk/docs/CPU-ARM-NEON.html - * https://code.google.com/p/android/issues/detail?id=49065 - * - * NOTE: this requires that libpng is built against the Android NDK and linked - * with an implementation of the Android ARM 'cpu-features' library. The code - * has been compiled only, not linked: no version of the library has been found, - * only the header files exist in the NDK. - */ -#include - -static int -png_have_neon(png_structp png_ptr) -{ - /* This is a whole lot easier than the linux code, however it is probably - * implemented as below, therefore it is better to cache the result (these - * function calls may be slow!) - */ - PNG_UNUSED(png_ptr) - return android_getCpuFamily() == ANDROID_CPU_FAMILY_ARM && - (android_getCpuFeatures() & ANDROID_CPU_ARM_FEATURE_NEON) != 0; -} diff --git a/contrib/arm-neon/linux-auxv.c b/contrib/arm-neon/linux-auxv.c deleted file mode 100644 index 4d26bd3b3..000000000 --- a/contrib/arm-neon/linux-auxv.c +++ /dev/null @@ -1,120 +0,0 @@ -/* contrib/arm-neon/linux-auxv.c - * - * Copyright (c) 2014 Glenn Randers-Pehrson - * Written by Mans Rullgard, 2011. - * Last changed in libpng 1.6.10 [March 6, 2014] - * - * This code is released under the libpng license. - * For conditions of distribution and use, see the disclaimer - * and license in png.h - * - * SEE contrib/arm-neon/README before reporting bugs - * - * STATUS: COMPILED, TESTED - * BUG REPORTS: png-mng-implement@sourceforge.net - * - * png_have_neon implemented for Linux versions which allow access to - * /proc/self/auxv. This is probably faster, cleaner and safer than the code to - * read /proc/cpuinfo in contrib/arm-neon/linux, however it is yet another piece - * of potentially untested code and has more complex dependencies than the code - * to read cpuinfo. - * - * This generic __linux__ implementation requires reading /proc/self/auxv and - * looking at each element for one that records NEON capabilities. - */ -#include /* for POSIX 1003.1 */ -#include /* for EINTR */ - -#include -#include -#include -#include -#include - -/* A read call may be interrupted, in which case it returns -1 and sets errno to - * EINTR if nothing was done, otherwise (if something was done) a partial read - * may result. - */ -static size_t -safe_read(png_structp png_ptr, int fd, void *buffer_in, size_t nbytes) -{ - size_t ntotal = 0; - char *buffer = png_voidcast(char*, buffer_in); - - while (nbytes > 0) - { - unsigned int nread; - int iread; - - /* Passing nread > INT_MAX to read is implementation defined in POSIX - * 1003.1, therefore despite the unsigned argument portable code must - * limit the value to INT_MAX! - */ - if (nbytes > INT_MAX) - nread = INT_MAX; - - else - nread = (unsigned int)/*SAFE*/nbytes; - - iread = read(fd, buffer, nread); - - if (iread == -1) - { - /* This is the devil in the details, a read can terminate early with 0 - * bytes read because of EINTR, yet it still returns -1 otherwise end - * of file cannot be distinguished. - */ - if (errno != EINTR) - { - png_warning(png_ptr, "/proc read failed"); - return 0; /* I.e., a permanent failure */ - } - } - - else if (iread < 0) - { - /* Not a valid 'read' result: */ - png_warning(png_ptr, "OS /proc read bug"); - return 0; - } - - else if (iread > 0) - { - /* Continue reading until a permanent failure, or EOF */ - buffer += iread; - nbytes -= (unsigned int)/*SAFE*/iread; - ntotal += (unsigned int)/*SAFE*/iread; - } - - else - return ntotal; - } - - return ntotal; /* nbytes == 0 */ -} - -static int -png_have_neon(png_structp png_ptr) -{ - int fd = open("/proc/self/auxv", O_RDONLY); - Elf32_auxv_t aux; - - /* Failsafe: failure to open means no NEON */ - if (fd == -1) - { - png_warning(png_ptr, "/proc/self/auxv open failed"); - return 0; - } - - while (safe_read(png_ptr, fd, &aux, sizeof aux) == sizeof aux) - { - if (aux.a_type == AT_HWCAP && (aux.a_un.a_val & HWCAP_NEON) != 0) - { - close(fd); - return 1; - } - } - - close(fd); - return 0; -} diff --git a/contrib/arm-neon/linux.c b/contrib/arm-neon/linux.c deleted file mode 100644 index a9bc360dd..000000000 --- a/contrib/arm-neon/linux.c +++ /dev/null @@ -1,161 +0,0 @@ -/* contrib/arm-neon/linux.c - * - * Last changed in libpng 1.6.31 [July 27, 2017] - * Copyright (c) 2014, 2017 Glenn Randers-Pehrson - * Written by John Bowler, 2014, 2017. - * - * This code is released under the libpng license. - * For conditions of distribution and use, see the disclaimer - * and license in png.h - * - * SEE contrib/arm-neon/README before reporting bugs - * - * STATUS: SUPPORTED - * BUG REPORTS: png-mng-implement@sourceforge.net - * - * png_have_neon implemented for Linux by reading the widely available - * pseudo-file /proc/cpuinfo. - * - * This code is strict ANSI-C and is probably moderately portable; it does - * however use and it assumes that /proc/cpuinfo is never localized. - */ -#include - -static int -png_have_neon(png_structp png_ptr) -{ - FILE *f = fopen("/proc/cpuinfo", "rb"); - - if (f != NULL) - { - /* This is a simple state machine which reads the input byte-by-byte until - * it gets a match on the 'neon' feature or reaches the end of the stream. - */ - static const char ch_feature[] = { 70, 69, 65, 84, 85, 82, 69, 83 }; - static const char ch_neon[] = { 78, 69, 79, 78 }; - - enum - { - StartLine, Feature, Colon, StartTag, Neon, HaveNeon, SkipTag, SkipLine - } state; - int counter; - - for (state=StartLine, counter=0;;) - { - int ch = fgetc(f); - - if (ch == EOF) - { - /* EOF means error or end-of-file, return false; neon at EOF is - * assumed to be a mistake. - */ - fclose(f); - return 0; - } - - switch (state) - { - case StartLine: - /* Match spaces at the start of line */ - if (ch <= 32) /* skip control characters and space */ - break; - - counter=0; - state = Feature; - /* FALLTHROUGH */ - - case Feature: - /* Match 'FEATURE', ASCII case insensitive. */ - if ((ch & ~0x20) == ch_feature[counter]) - { - if (++counter == (sizeof ch_feature)) - state = Colon; - break; - } - - /* did not match 'feature' */ - state = SkipLine; - /* FALLTHROUGH */ - - case SkipLine: - skipLine: - /* Skip everything until we see linefeed or carriage return */ - if (ch != 10 && ch != 13) - break; - - state = StartLine; - break; - - case Colon: - /* Match any number of space or tab followed by ':' */ - if (ch == 32 || ch == 9) - break; - - if (ch == 58) /* i.e. ':' */ - { - state = StartTag; - break; - } - - /* Either a bad line format or a 'feature' prefix followed by - * other characters. - */ - state = SkipLine; - goto skipLine; - - case StartTag: - /* Skip space characters before a tag */ - if (ch == 32 || ch == 9) - break; - - state = Neon; - counter = 0; - /* FALLTHROUGH */ - - case Neon: - /* Look for 'neon' tag */ - if ((ch & ~0x20) == ch_neon[counter]) - { - if (++counter == (sizeof ch_neon)) - state = HaveNeon; - break; - } - - state = SkipTag; - /* FALLTHROUGH */ - - case SkipTag: - /* Skip non-space characters */ - if (ch == 10 || ch == 13) - state = StartLine; - - else if (ch == 32 || ch == 9) - state = StartTag; - break; - - case HaveNeon: - /* Have seen a 'neon' prefix, but there must be a space or new - * line character to terminate it. - */ - if (ch == 10 || ch == 13 || ch == 32 || ch == 9) - { - fclose(f); - return 1; - } - - state = SkipTag; - break; - - default: - png_error(png_ptr, "png_have_neon: internal error (bug)"); - } - } - } - -#ifdef PNG_WARNINGS_SUPPORTED - else - png_warning(png_ptr, "/proc/cpuinfo open failed"); -#endif - - return 0; -} diff --git a/contrib/conftest/README b/contrib/conftest/README deleted file mode 100644 index 0f472791f..000000000 --- a/contrib/conftest/README +++ /dev/null @@ -1,49 +0,0 @@ -This directory contains test configuration files, currently always '.dfa' files -intended to be used in the build by setting the make macro DFA_XTRA to the name -of the file. - -These files are used in release validation of the 'configure' builds of libpng -by building 'make check', or 'make all-am' for cross-builds, with each .dfa -file. - -The files in this directory may change between minor releases, however -contributions describing specific builds of libpng are welcomed. There is no -guarantee that libpng will continue to build with such configurations; support -for given configurations can be, and has been, dropped between successive minor -releases. However if a .dfa file describing a configuration is not in this -directory it is very unlikely that it will be tested before a minor release! - -You can use these .dfa files as the basis of new configurations. Files in this -directory should not have any use restrictions or restrictive licenses. - -This directory is not included in the .zip and .7z distributions, which do -not contain 'configure' scripts. - -DOCUMENTATION -============= - -Examples: - ${srcdir}/pngusr.dfa - ${srcdir}/contrib/pngminim/*/pngusr.dfa - -Documentation of the options: - ${srcdir}/scripts/pnglibconf.dfa - -Documentation of the file format: - ${srcdir}/scripts/options.awk - -FILE NAMING -=========== - -File names in this directory may NOT contain any of the five characters: - - - , + * ? - -Neither may they contain any space character. - -While other characters may be used it is strongly suggested that file names be -limited to lower case Latiin alphabetic characters (a-z), digits (0-9) and, if -necessary the underscore (_) character. File names should be about 8 characters -long (excluding the .dfa extension). Submitted .dfa files should have names -between 7 and 16 characters long, shorter names (6 characters or less) are -reserved for standard tests. diff --git a/contrib/conftest/pngcp.dfa b/contrib/conftest/pngcp.dfa deleted file mode 100644 index 31c411d5f..000000000 --- a/contrib/conftest/pngcp.dfa +++ /dev/null @@ -1,57 +0,0 @@ -# pngcp.dfa -# Build time configuration of libpng -# -# Author: John Bowler -# Copyright: (c) John Bowler, 2016 -# Usage rights: -# To the extent possible under law, the author has waived all copyright and -# related or neighboring rights to this work. This work is published from: -# United States. -# -# Build libpng with support for pngcp. This means just png_read_png, -# png_write_png and small number of configuration settings. -# -everything = off - -# This option is specific to this configuration; it adds a #define to the -# generated pnglibconf.h which turns on the (not portable) timing option for -# pngcp. Note that any option is automatically preceded by PNG_; there is no -# way round this and this is deliberate. -option PNGCP_TIMING - -# Because of the everything off above the option must also be turned on. This -# may not be done in one step because it is safer and avoids mis-spelled options -# in user .dfa files to error out if an unrecognized option is turned on. -option PNGCP_TIMING on - -# Options to turn on png_read_png and png_write_png: -option INFO_IMAGE on -option SEQUENTIAL_READ on -option EASY_ACCESS on -option WRITE on -option WRITE_16BIT on -option WRITE_FILTER on - -# pngcp needs this to preserve unknown chunks, switching all these on means that -# pngcp can work without explicit known chunk reading support -option UNKNOWN_CHUNKS on -option SET_UNKNOWN_CHUNKS on -option HANDLE_AS_UNKNOWN on -option SAVE_UNKNOWN_CHUNKS on -option WRITE_UNKNOWN_CHUNKS on - -# pngcp needs this to handle palette files with invalid indices: -option CHECK_FOR_INVALID_INDEX on -option GET_PALETTE_MAX on - -# Pre-libpng 1.7 pngcp has to stash text chunks manually, post 1.7 without this -# text chunks should be handled as unknown ok. -option TEXT on - -# this is used to turn off limits: -option USER_LIMITS on -option SET_USER_LIMITS on - -# these are just required for specific customizations -option WRITE_CUSTOMIZE_ZTXT_COMPRESSION on -option WRITE_CUSTOMIZE_COMPRESSION on diff --git a/contrib/conftest/read.dfa b/contrib/conftest/read.dfa deleted file mode 100644 index 21e88d01a..000000000 --- a/contrib/conftest/read.dfa +++ /dev/null @@ -1,58 +0,0 @@ -# read.dfa -# Build time configuration of libpng -# -# Author: John Bowler -# Copyright: (c) John Bowler, 2013 -# Usage rights: -# To the extent possible under law, the author has waived all copyright and -# related or neighboring rights to this work. This work is published from: -# United States. -# -# Build libpng with basic read support. This enables the lowest level libpng -# read API - the one where the calling code has to use a loop to read each row. -# At present this is the API used by most programs. -# -# Support is enabled only for those chunks and transformations that are -# typically required - others can be added easily. -# - -everything = off - -# The sequential read code is enabled here; the progressive code can be used -# instead but there is no point enabling both. - -option SEQUENTIAL_READ on - -# Likewise it is pointless enabling both fixed and floating point APIs. Choose -# one or the other for both the API and the internal math. - -#Fixed point: -#option FIXED_POINT on -#option FLOATING_ARITHMETIC off - -#Floating point: -option FLOATING_POINT on -option FLOATING_ARITHMETIC on - -# Basic error handling, IO and user memory support. The latter allows the -# application program to provide its own implementations of 'malloc' and 'free'. -option SETJMP on -option STDIO on -option USER_MEM on - -# To read the full set of PNG images correctly interlace, transparency and -# 16-bit support is required. The application can implement interlace itself, -# but very few do and it's no longer possible to disable it when READ is -# enabled. -option READ_tRNS on -option READ_16BIT on - -# Everything else is application dependent. This file assumes the app handles -# all the native PNG bit layouts, so it doesn't need any of layout change -# transforms, but needs libpng to perform gamma correction. It doesn't do any -# colorspace stuff and ignores the 'significant bit' information. -# -# If your app always expands the image to a limited set of bit layouts you -# probably want to consider using the simplified API instead of the low level -# one - see png.h and s_read.dfa. -option READ_GAMMA on diff --git a/contrib/conftest/s_read.dfa b/contrib/conftest/s_read.dfa deleted file mode 100644 index cb1ce0ba6..000000000 --- a/contrib/conftest/s_read.dfa +++ /dev/null @@ -1,35 +0,0 @@ -# s_read.dfa -# Build time configuration of libpng -# -# Author: John Bowler -# Copyright: (c) John Bowler, 2013 -# Usage rights: -# To the extent possible under law, the author has waived all copyright and -# related or neighboring rights to this work. This work is published from: -# United States. -# -# Build libpng with simplified read support (only). This builds a minimal -# libpng able to read all PNG formats and convert them into a small number of -# well understood memory formats. -# - -everything = off - -option SIMPLIFIED_READ on - -# It isn't necessary to chose fixed or floating point for the APIs because the -# simplified API doesn't need fixed or floating point numbers. It is necessary -# to chose an internal math implementation. The default (because of 'everything -# = off') is fixed point - turn the floating point implementation on if you have -# hardware floating point or prefer your software floating point implementation. -option FLOATING_ARITHMETIC on - -# This is not strictly necessary, but without it the message strings in the API -# will not be filled in -option ERROR_TEXT on - -# Switching these options on enables the 'AFIRST' and 'BGR' formats - you don't -# need this if you don't use them, they just allow the in-memory layout to be -# changed to match common hardware formats. -option SIMPLIFIED_READ_AFIRST on -option SIMPLIFIED_READ_BGR on diff --git a/contrib/conftest/s_write.dfa b/contrib/conftest/s_write.dfa deleted file mode 100644 index e540a46dc..000000000 --- a/contrib/conftest/s_write.dfa +++ /dev/null @@ -1,33 +0,0 @@ -# s_write.dfa -# Build time configuration of libpng -# -# Author: John Bowler -# Copyright: (c) John Bowler, 2013 -# Usage rights: -# To the extent possible under law, the author has waived all copyright and -# related or neighboring rights to this work. This work is published from: -# United States. -# -# Build libpng with (just) simplified write support -# - -everything = off - -option SIMPLIFIED_WRITE on - -# It isn't necessary to chose fixed or floating point for the APIs because the -# simplified API doesn't need fixed or floating point numbers. It is necessary -# to chose an internal math implementation. The default (because of 'everything -# = off') is fixed point - turn the floating point implementation on if you have -# hardware floating point or prefer your software floating point implementation. -option FLOATING_ARITHMETIC on - -# This is not strictly necessary, but without it the message strings in the API -# will not be filled in -option ERROR_TEXT on - -# Switching these options on enables the 'AFIRST' and 'BGR' formats - you don't -# need this if you don't use them, they just allow the in-memory layout to be -# changed to match common hardware formats. -option SIMPLIFIED_WRITE_AFIRST on -option SIMPLIFIED_WRITE_BGR on diff --git a/contrib/conftest/simple.dfa b/contrib/conftest/simple.dfa deleted file mode 100644 index 041933344..000000000 --- a/contrib/conftest/simple.dfa +++ /dev/null @@ -1,36 +0,0 @@ -# simple.dfa -# Build time configuration of libpng -# -# Author: John Bowler -# Copyright: (c) John Bowler, 2013 -# Usage rights: -# To the extent possible under law, the author has waived all copyright and -# related or neighboring rights to this work. This work is published from: -# United States. -# -# Build libpng with just the simplified APIs (read and write). -# - -everything = off - -option SIMPLIFIED_WRITE on -option SIMPLIFIED_READ on - -# It isn't necessary to chose fixed or floating point for the APIs because the -# simplified API doesn't need fixed or floating point numbers. It is necessary -# to chose an internal math implementation. The default (because of 'everything -# = off') is fixed point - turn the floating point implementation on if you have -# hardware floating point or prefer your software floating point implementation. -option FLOATING_ARITHMETIC on - -# This is not strictly necessary, but without it the message strings in the API -# will not be filled in -option ERROR_TEXT on - -# Switching these options on enables the 'AFIRST' and 'BGR' formats - you don't -# need this if you don't use them, they just allow the in-memory layout to be -# changed to match common hardware formats. -option SIMPLIFIED_READ_AFIRST on -option SIMPLIFIED_READ_BGR on -option SIMPLIFIED_WRITE_AFIRST on -option SIMPLIFIED_WRITE_BGR on diff --git a/contrib/conftest/write.dfa b/contrib/conftest/write.dfa deleted file mode 100644 index 3319aabee..000000000 --- a/contrib/conftest/write.dfa +++ /dev/null @@ -1,45 +0,0 @@ -# write.dfa -# Build time configuration of libpng -# -# Author: John Bowler -# Copyright: (c) John Bowler, 2013 -# Usage rights: -# To the extent possible under law, the author has waived all copyright and -# related or neighboring rights to this work. This work is published from: -# United States. -# -# Build libpng with no read support and minimal write support. -# - -everything = off - -# Switch on the write code - this makes a minimalist encoder - -option WRITE on - -# Choose fixed or floating point APIs and arithmetic. The choices are -# independent but normally they will match. It is typically better to use the -# floating point if you have floating point hardware. If you don't know, or -# (perhaps) to make libpng smaller used fixed point throughout. - -#Fixed point: -#option FIXED_POINT on -#option FLOATING_ARITHMETIC off - -#Floating point: -option FLOATING_POINT on -option FLOATING_ARITHMETIC on - -# Basic error handling, IO and user memory support. The latter allows the -# application program to provide its own implementations of 'malloc' and 'free'. -option SETJMP on -option STDIO on -option USER_MEM on - -# Everything else is optional. Unlike the read code in libpng the write code -# does not need to deal with arbitrary formats, so only add support for things -# you really do write! For example you might only write sRGB images, sometimes -# with transparency and never write 16 bit images, so: -option WRITE_sRGB on -option WRITE_tRNS on -#option WRITE_16BIT off (this is the default with 'everything = off') diff --git a/contrib/examples/README.txt b/contrib/examples/README.txt deleted file mode 100644 index 48dab4f0f..000000000 --- a/contrib/examples/README.txt +++ /dev/null @@ -1,24 +0,0 @@ - -This directory (contrib/examples) contains examples of libpng usage. - -NO COPYRIGHT RIGHTS ARE CLAIMED TO ANY OF THE FILES IN THIS DIRECTORY. - -To the extent possible under law, the authors have waived all copyright and -related or neighboring rights to this work. This work is published from: -United States. - -The files may be used freely in any way. The intention is that appropriate -parts of the files be used in other libpng-using programs without any need for -the authors of the using code to seek copyright or license from the original -authors. - -The source code and comments in this directory are the original work of the -people named below. No other person or organization has made contributions to -the work in this directory. - -ORIGINAL AUTHORS - The following people have contributed to the code in this directory. None - of the people below claim any rights with regard to the contents of this - directory. - - John Bowler diff --git a/contrib/examples/iccfrompng.c b/contrib/examples/iccfrompng.c deleted file mode 100644 index 00056abfd..000000000 --- a/contrib/examples/iccfrompng.c +++ /dev/null @@ -1,185 +0,0 @@ -/*- iccfrompng - * - * COPYRIGHT: Written by John Cunningham Bowler, 2011. - * To the extent possible under law, the author has waived all copyright and - * related or neighboring rights to this work. This work is published from: - * United States. - * - * Extract any icc profiles found in the given PNG files. This is a simple - * example of a program that extracts information from the header of a PNG file - * without processing the image. Notice that some header information may occur - * after the image data. Textual data and comments are an example; the approach - * in this file won't work reliably for such data because it only looks for the - * information in the section of the file that precedes the image data. - * - * Compile and link against libpng and zlib, plus anything else required on the - * system you use. - * - * To use supply a list of PNG files containing iCCP chunks, the chunks will be - * extracted to a similarly named file with the extension replaced by 'icc', - * which will be overwritten without warning. - */ -#include -#include -#include -#include - -#include - -#if defined(PNG_READ_SUPPORTED) && defined(PNG_STDIO_SUPPORTED) && \ - defined (PNG_iCCP_SUPPORTED) - - -static int verbose = 1; -static png_byte no_profile[] = "no profile"; - -static png_bytep -extract(FILE *fp, png_uint_32 *proflen) -{ - png_structp png_ptr = png_create_read_struct(PNG_LIBPNG_VER_STRING,0,0,0); - png_infop info_ptr = NULL; - png_bytep result = NULL; - - /* Initialize for error or no profile: */ - *proflen = 0; - - if (png_ptr == NULL) - { - fprintf(stderr, "iccfrompng: version library mismatch?\n"); - return 0; - } - - if (setjmp(png_jmpbuf(png_ptr))) - { - png_destroy_read_struct(&png_ptr, &info_ptr, NULL); - return 0; - } - - png_init_io(png_ptr, fp); - - info_ptr = png_create_info_struct(png_ptr); - if (info_ptr == NULL) - png_error(png_ptr, "OOM allocating info structure"); - - png_read_info(png_ptr, info_ptr); - - { - png_charp name; - int compression_type; - png_bytep profile; - - if (png_get_iCCP(png_ptr, info_ptr, &name, &compression_type, &profile, - proflen) & PNG_INFO_iCCP) - { - result = malloc(*proflen); - if (result != NULL) - memcpy(result, profile, *proflen); - - else - png_error(png_ptr, "OOM allocating profile buffer"); - } - - else - result = no_profile; - } - - png_destroy_read_struct(&png_ptr, &info_ptr, NULL); - return result; -} - -static int -extract_one_file(const char *filename) -{ - int result = 0; - FILE *fp = fopen(filename, "rb"); - - if (fp != NULL) - { - png_uint_32 proflen = 0; - png_bytep profile = extract(fp, &proflen); - - if (profile != NULL && profile != no_profile) - { - size_t len; - char *output; - - { - const char *ep = strrchr(filename, '.'); - - if (ep != NULL) - len = ep-filename; - - else - len = strlen(filename); - } - - output = malloc(len + 5); - if (output != NULL) - { - FILE *of; - - memcpy(output, filename, len); - strcpy(output+len, ".icc"); - - of = fopen(output, "wb"); - if (of != NULL) - { - if (fwrite(profile, proflen, 1, of) == 1 && - fflush(of) == 0 && - fclose(of) == 0) - { - if (verbose) - printf("%s -> %s\n", filename, output); - /* Success return */ - result = 1; - } - - else - { - fprintf(stderr, "%s: error writing profile\n", output); - if (remove(output)) - fprintf(stderr, "%s: could not remove file\n", output); - } - } - - else - fprintf(stderr, "%s: failed to open output file\n", output); - - free(output); - } - - else - fprintf(stderr, "%s: OOM allocating string!\n", filename); - - free(profile); - } - - else if (verbose && profile == no_profile) - printf("%s has no profile\n", filename); - } - - else - fprintf(stderr, "%s: could not open file\n", filename); - - return result; -} - -int -main(int argc, char **argv) -{ - int i; - int extracted = 0; - - for (i=1; i -#include -#include /* required for error handling */ - -/* Normally use here to get the installed libpng, but this is done to - * ensure the code picks up the local libpng implementation: - */ -#include "../../png.h" - -#if defined(PNG_READ_SUPPORTED) && defined(PNG_SEQUENTIAL_READ_SUPPORTED) - -/* Return component 'c' of pixel 'x' from the given row. */ -static unsigned int -component(png_const_bytep row, png_uint_32 x, unsigned int c, - unsigned int bit_depth, unsigned int channels) -{ - /* PNG images can be up to 2^31 pixels wide, but this means they can be up to - * 2^37 bits wide (for a 64-bit pixel - the largest possible) and hence 2^34 - * bytes wide. Since the row fitted into memory, however, the following must - * work: - */ - png_uint_32 bit_offset_hi = bit_depth * ((x >> 6) * channels); - png_uint_32 bit_offset_lo = bit_depth * ((x & 0x3f) * channels + c); - - row = (png_const_bytep)(((const png_byte (*)[8])row) + bit_offset_hi); - row += bit_offset_lo >> 3; - bit_offset_lo &= 0x07; - - /* PNG pixels are packed into bytes to put the first pixel in the highest - * bits of the byte and into two bytes for 16-bit values with the high 8 bits - * first, so: - */ - switch (bit_depth) - { - case 1: return (row[0] >> (7-bit_offset_lo)) & 0x01; - case 2: return (row[0] >> (6-bit_offset_lo)) & 0x03; - case 4: return (row[0] >> (4-bit_offset_lo)) & 0x0f; - case 8: return row[0]; - case 16: return (row[0] << 8) + row[1]; - default: - /* This should never happen; it indicates a bug in this program or in - * libpng itself: - */ - fprintf(stderr, "pngpixel: invalid bit depth %u\n", bit_depth); - exit(1); - } -} - -/* Print a pixel from a row returned by libpng; determine the row format, find - * the pixel, and print the relevant information to stdout. - */ -static void -print_pixel(png_structp png_ptr, png_infop info_ptr, png_const_bytep row, - png_uint_32 x) -{ - unsigned int bit_depth = png_get_bit_depth(png_ptr, info_ptr); - - switch (png_get_color_type(png_ptr, info_ptr)) - { - case PNG_COLOR_TYPE_GRAY: - printf("GRAY %u\n", component(row, x, 0, bit_depth, 1)); - return; - - /* The palette case is slightly more difficult - the palette and, if - * present, the tRNS ('transparency', though the values are really - * opacity) data must be read to give the full picture: - */ - case PNG_COLOR_TYPE_PALETTE: - { - int index = component(row, x, 0, bit_depth, 1); - png_colorp palette = NULL; - int num_palette = 0; - - if ((png_get_PLTE(png_ptr, info_ptr, &palette, &num_palette) & - PNG_INFO_PLTE) && num_palette > 0 && palette != NULL) - { - png_bytep trans_alpha = NULL; - int num_trans = 0; - if ((png_get_tRNS(png_ptr, info_ptr, &trans_alpha, &num_trans, - NULL) & PNG_INFO_tRNS) && num_trans > 0 && - trans_alpha != NULL) - printf("INDEXED %u = %d %d %d %d\n", index, - palette[index].red, palette[index].green, - palette[index].blue, - index < num_trans ? trans_alpha[index] : 255); - - else /* no transparency */ - printf("INDEXED %u = %d %d %d\n", index, - palette[index].red, palette[index].green, - palette[index].blue); - } - - else - printf("INDEXED %u = invalid index\n", index); - } - return; - - case PNG_COLOR_TYPE_RGB: - printf("RGB %u %u %u\n", component(row, x, 0, bit_depth, 3), - component(row, x, 1, bit_depth, 3), - component(row, x, 2, bit_depth, 3)); - return; - - case PNG_COLOR_TYPE_GRAY_ALPHA: - printf("GRAY+ALPHA %u %u\n", component(row, x, 0, bit_depth, 2), - component(row, x, 1, bit_depth, 2)); - return; - - case PNG_COLOR_TYPE_RGB_ALPHA: - printf("RGBA %u %u %u %u\n", component(row, x, 0, bit_depth, 4), - component(row, x, 1, bit_depth, 4), - component(row, x, 2, bit_depth, 4), - component(row, x, 3, bit_depth, 4)); - return; - - default: - png_error(png_ptr, "pngpixel: invalid color type"); - } -} - -int main(int argc, const char **argv) -{ - /* This program uses the default, based, libpng error handling - * mechanism, therefore any local variable that exists before the call to - * setjmp and is changed after the call to setjmp returns successfully must - * be declared with 'volatile' to ensure that their values don't get - * destroyed by longjmp: - */ - volatile int result = 1/*fail*/; - - if (argc == 4) - { - long x = atol(argv[1]); - long y = atol(argv[2]); - FILE *f = fopen(argv[3], "rb"); - volatile png_bytep row = NULL; - - if (f != NULL) - { - /* libpng requires a callback function for handling errors; this - * callback must not return. The default callback function uses a - * stored style jmp_buf which is held in a png_struct and - * writes error messages to stderr. Creating the png_struct is a - * little tricky; just copy the following code. - */ - png_structp png_ptr = png_create_read_struct(PNG_LIBPNG_VER_STRING, - NULL, NULL, NULL); - - if (png_ptr != NULL) - { - png_infop info_ptr = png_create_info_struct(png_ptr); - - if (info_ptr != NULL) - { - /* Declare stack variables to hold pointers to locally allocated - * data. - */ - - /* Initialize the error control buffer: */ - if (setjmp(png_jmpbuf(png_ptr)) == 0) - { - png_uint_32 width, height; - int bit_depth, color_type, interlace_method, - compression_method, filter_method; - png_bytep row_tmp; - - /* Now associate the recently opened (FILE*) with the default - * libpng initialization functions. Sometimes libpng is - * compiled without stdio support (it can be difficult to do - * in some environments); in that case you will have to write - * your own read callback to read data from the (FILE*). - */ - png_init_io(png_ptr, f); - - /* And read the first part of the PNG file - the header and - * all the information up to the first pixel. - */ - png_read_info(png_ptr, info_ptr); - - /* This fills in enough information to tell us the width of - * each row in bytes, allocate the appropriate amount of - * space. In this case png_malloc is used - it will not - * return if memory isn't available. - */ - row = png_malloc(png_ptr, png_get_rowbytes(png_ptr, - info_ptr)); - - /* To avoid the overhead of using a volatile auto copy row_tmp - * to a local here - just use row for the png_free below. - */ - row_tmp = row; - - /* All the information we need is in the header is returned by - * png_get_IHDR, if this fails we can now use 'png_error' to - * signal the error and return control to the setjmp above. - */ - if (png_get_IHDR(png_ptr, info_ptr, &width, &height, - &bit_depth, &color_type, &interlace_method, - &compression_method, &filter_method)) - { - int passes, pass; - - /* png_set_interlace_handling returns the number of - * passes required as well as turning on libpng's - * handling, but since we do it ourselves this is - * necessary: - */ - switch (interlace_method) - { - case PNG_INTERLACE_NONE: - passes = 1; - break; - - case PNG_INTERLACE_ADAM7: - passes = PNG_INTERLACE_ADAM7_PASSES; - break; - - default: - png_error(png_ptr, "pngpixel: unknown interlace"); - } - - /* Now read the pixels, pass-by-pass, row-by-row: */ - png_start_read_image(png_ptr); - - for (pass=0; pass -#include -#include -#include - -/* Normally use here to get the installed libpng, but this is done to - * ensure the code picks up the local libpng implementation: - */ -#include "../../png.h" -#if defined(PNG_SIMPLIFIED_READ_SUPPORTED) && \ - defined(PNG_SIMPLIFIED_WRITE_SUPPORTED) - -int main(int argc, const char **argv) -{ - int result = 1; - - if (argc == 3) - { - png_image image; - - /* Only the image structure version number needs to be set. */ - memset(&image, 0, sizeof image); - image.version = PNG_IMAGE_VERSION; - - if (png_image_begin_read_from_file(&image, argv[1])) - { - png_bytep buffer; - - /* Change this to try different formats! If you set a colormap format - * then you must also supply a colormap below. - */ - image.format = PNG_FORMAT_RGBA; - - buffer = malloc(PNG_IMAGE_SIZE(image)); - - if (buffer != NULL) - { - if (png_image_finish_read(&image, NULL/*background*/, buffer, - 0/*row_stride*/, NULL/*colormap for PNG_FORMAT_FLAG_COLORMAP */)) - { - if (png_image_write_to_file(&image, argv[2], - 0/*convert_to_8bit*/, buffer, 0/*row_stride*/, - NULL/*colormap*/)) - result = 0; - - else - fprintf(stderr, "pngtopng: write %s: %s\n", argv[2], - image.message); - } - - else - fprintf(stderr, "pngtopng: read %s: %s\n", argv[1], - image.message); - - free(buffer); - } - - else - { - fprintf(stderr, "pngtopng: out of memory: %lu bytes\n", - (unsigned long)PNG_IMAGE_SIZE(image)); - - /* This is the only place where a 'free' is required; libpng does - * the cleanup on error and success, but in this case we couldn't - * complete the read because of running out of memory and so libpng - * has not got to the point where it can do cleanup. - */ - png_image_free(&image); - } - } - - else - /* Failed to read the first argument: */ - fprintf(stderr, "pngtopng: %s: %s\n", argv[1], image.message); - } - - else - /* Wrong number of arguments */ - fprintf(stderr, "pngtopng: usage: pngtopng input-file output-file\n"); - - return result; -} -#endif /* READ && WRITE */ diff --git a/contrib/examples/simpleover.c b/contrib/examples/simpleover.c deleted file mode 100644 index 59dd31368..000000000 --- a/contrib/examples/simpleover.c +++ /dev/null @@ -1,648 +0,0 @@ -/*- simpleover - * - * COPYRIGHT: Written by John Cunningham Bowler, 2015. - * To the extent possible under law, the author has waived all copyright and - * related or neighboring rights to this work. This work is published from: - * United States. - * - * Read several PNG files, which should have an alpha channel or transparency - * information, and composite them together to produce one or more 16-bit linear - * RGBA intermediates. This involves doing the correct 'over' composition to - * combine the alpha channels and corresponding data. - * - * Finally read an output (background) PNG using the 24-bit RGB format (the - * PNG will be composited on green (#00ff00) by default if it has an alpha - * channel), and apply the intermediate image generated above to specified - * locations in the image. - * - * The command line has the general format: - * - * simpleover [output.png] - * {--sprite=width,height,name {[--at=x,y] {sprite.png}}} - * {--add=name {x,y}} - * - * The --sprite and --add options may occur multiple times. They are executed - * in order. --add may refer to any sprite already read. - * - * This code is intended to show how to composite multiple images together - * correctly. Apart from the libpng Simplified API the only work done in here - * is to combine multiple input PNG images into a single sprite; this involves - * a Porter-Duff 'over' operation and the input PNG images may, as a result, - * be regarded as being layered one on top of the other with the first (leftmost - * on the command line) being at the bottom and the last on the top. - */ -#include -#include -#include -#include -#include - -/* Normally use here to get the installed libpng, but this is done to - * ensure the code picks up the local libpng implementation, so long as this - * file is linked against a sufficiently recent libpng (1.6+) it is ok to - * change this to : - */ -#include "../../png.h" - -#ifdef PNG_SIMPLIFIED_READ_SUPPORTED - -#define sprite_name_chars 15 -struct sprite { - FILE *file; - png_uint_16p buffer; - unsigned int width; - unsigned int height; - char name[sprite_name_chars+1]; -}; - -#if 0 /* div by 65535 test program */ -#include -#include - -int main(void) { - double err = 0; - unsigned int xerr = 0; - unsigned int r = 32769; - { - unsigned int x = 0; - - do { - unsigned int t = x + (x >> 16) /*+ (x >> 31)*/ + r; - double v = x, errtest; - - if (t < x) { - fprintf(stderr, "overflow: %u+%u -> %u\n", x, r, t); - return 1; - } - - v /= 65535; - errtest = v; - t >>= 16; - errtest -= t; - - if (errtest > err) { - err = errtest; - xerr = x; - - if (errtest >= .5) { - fprintf(stderr, "error: %u/65535 = %f, not %u, error %f\n", - x, v, t, errtest); - return 0; - } - } - } while (++x <= 65535U*65535U); - } - - printf("error %f @ %u\n", err, xerr); - - return 0; -} -#endif /* div by 65535 test program */ - -static void -sprite_op(const struct sprite *sprite, int x_offset, int y_offset, - png_imagep image, const png_uint_16 *buffer) -{ - /* This is where the Porter-Duff 'Over' operator is evaluated; change this - * code to change the operator (this could be parameterized). Any other - * image processing operation could be used here. - */ - - - /* Check for an x or y offset that pushes any part of the image beyond the - * right or bottom of the sprite: - */ - if ((y_offset < 0 || (unsigned)/*SAFE*/y_offset < sprite->height) && - (x_offset < 0 || (unsigned)/*SAFE*/x_offset < sprite->width)) - { - unsigned int y = 0; - - if (y_offset < 0) - y = -y_offset; /* Skip to first visible row */ - - do - { - unsigned int x = 0; - - if (x_offset < 0) - x = -x_offset; - - do - { - /* In and out are RGBA values, so: */ - const png_uint_16 *in_pixel = buffer + (y * image->width + x)*4; - png_uint_32 in_alpha = in_pixel[3]; - - /* This is the optimized Porter-Duff 'Over' operation, when the - * input alpha is 0 the output is not changed. - */ - if (in_alpha > 0) - { - png_uint_16 *out_pixel = sprite->buffer + - ((y+y_offset) * sprite->width + (x+x_offset))*4; - - /* This is the weight to apply to the output: */ - in_alpha = 65535-in_alpha; - - if (in_alpha > 0) - { - /* The input must be composed onto the output. This means - * multiplying the current output pixel value by the inverse - * of the input alpha (1-alpha). A division is required but - * it is by the constant 65535. Approximate this as: - * - * (x + (x >> 16) + 32769) >> 16; - * - * This is exact (and does not overflow) for all values of - * x in the range 0..65535*65535. (Note that the calculation - * produces the closest integer; the maximum error is <0.5). - */ - png_uint_32 tmp; - -# define compose(c)\ - tmp = out_pixel[c] * in_alpha;\ - tmp = (tmp + (tmp >> 16) + 32769) >> 16;\ - out_pixel[c] = tmp + in_pixel[c] - - /* The following is very vectorizable... */ - compose(0); - compose(1); - compose(2); - compose(3); - } - - else - out_pixel[0] = in_pixel[0], - out_pixel[1] = in_pixel[1], - out_pixel[2] = in_pixel[2], - out_pixel[3] = in_pixel[3]; - } - } - while (++x < image->width); - } - while (++y < image->height); - } -} - -static int -create_sprite(struct sprite *sprite, int *argc, const char ***argv) -{ - /* Read the arguments and create this sprite. The sprite buffer has already - * been allocated. This reads the input PNGs one by one in linear format, - * composes them onto the sprite buffer (the code in the function above) - * then saves the result, converting it on the fly to PNG RGBA 8-bit format. - */ - while (*argc > 0) - { - char tombstone; - int x = 0, y = 0; - - if ((*argv)[0][0] == '-' && (*argv)[0][1] == '-') - { - /* The only supported option is --at. */ - if (sscanf((*argv)[0], "--at=%d,%d%c", &x, &y, &tombstone) != 2) - break; /* success; caller will parse this option */ - - ++*argv, --*argc; - } - - else - { - /* The argument has to be a file name */ - png_image image; - - image.version = PNG_IMAGE_VERSION; - image.opaque = NULL; - - if (png_image_begin_read_from_file(&image, (*argv)[0])) - { - png_uint_16p buffer; - - image.format = PNG_FORMAT_LINEAR_RGB_ALPHA; - - buffer = malloc(PNG_IMAGE_SIZE(image)); - - if (buffer != NULL) - { - if (png_image_finish_read(&image, NULL/*background*/, buffer, - 0/*row_stride*/, - NULL/*colormap for PNG_FORMAT_FLAG_COLORMAP*/)) - { - /* This is the place where the Porter-Duff 'Over' operator - * needs to be done by this code. In fact, any image - * processing required can be done here; the data is in - * the correct format (linear, 16-bit) and source and - * destination are in memory. - */ - sprite_op(sprite, x, y, &image, buffer); - free(buffer); - ++*argv, --*argc; - /* And continue to the next argument */ - continue; - } - - else - { - free(buffer); - fprintf(stderr, "simpleover: read %s: %s\n", (*argv)[0], - image.message); - } - } - - else - { - fprintf(stderr, "simpleover: out of memory: %lu bytes\n", - (unsigned long)PNG_IMAGE_SIZE(image)); - - /* png_image_free must be called if we abort the Simplified API - * read because of a problem detected in this code. If problems - * are detected in the Simplified API it cleans up itself. - */ - png_image_free(&image); - } - } - - else - { - /* Failed to read the first argument: */ - fprintf(stderr, "simpleover: %s: %s\n", (*argv)[0], image.message); - } - - return 0; /* failure */ - } - } - - /* All the sprite operations have completed successfully. Save the RGBA - * buffer as a PNG using the simplified write API. - */ - sprite->file = tmpfile(); - - if (sprite->file != NULL) - { - png_image save; - - memset(&save, 0, sizeof save); - save.version = PNG_IMAGE_VERSION; - save.opaque = NULL; - save.width = sprite->width; - save.height = sprite->height; - save.format = PNG_FORMAT_LINEAR_RGB_ALPHA; - save.flags = PNG_IMAGE_FLAG_FAST; - save.colormap_entries = 0; - - if (png_image_write_to_stdio(&save, sprite->file, 1/*convert_to_8_bit*/, - sprite->buffer, 0/*row_stride*/, NULL/*colormap*/)) - { - /* Success; the buffer is no longer needed: */ - free(sprite->buffer); - sprite->buffer = NULL; - return 1; /* ok */ - } - - else - fprintf(stderr, "simpleover: write sprite %s: %s\n", sprite->name, - save.message); - } - - else - fprintf(stderr, "simpleover: sprite %s: could not allocate tmpfile: %s\n", - sprite->name, strerror(errno)); - - return 0; /* fail */ -} - -static int -add_sprite(png_imagep output, png_bytep out_buf, struct sprite *sprite, - int *argc, const char ***argv) -{ - /* Given a --add argument naming this sprite, perform the operations listed - * in the following arguments. The arguments are expected to have the form - * (x,y), which is just an offset at which to add the sprite to the - * output. - */ - while (*argc > 0) - { - char tombstone; - int x, y; - - if ((*argv)[0][0] == '-' && (*argv)[0][1] == '-') - return 1; /* success */ - - if (sscanf((*argv)[0], "%d,%d%c", &x, &y, &tombstone) == 2) - { - /* Now add the new image into the sprite data, but only if it - * will fit. - */ - if (x < 0 || y < 0 || - (unsigned)/*SAFE*/x >= output->width || - (unsigned)/*SAFE*/y >= output->height || - sprite->width > output->width-x || - sprite->height > output->height-y) - { - fprintf(stderr, "simpleover: sprite %s @ (%d,%d) outside image\n", - sprite->name, x, y); - /* Could just skip this, but for the moment it is an error */ - return 0; /* error */ - } - - else - { - /* Since we know the sprite fits we can just read it into the - * output using the simplified API. - */ - png_image in; - - in.version = PNG_IMAGE_VERSION; - rewind(sprite->file); - - if (png_image_begin_read_from_stdio(&in, sprite->file)) - { - in.format = PNG_FORMAT_RGB; /* force compose */ - - if (png_image_finish_read(&in, NULL/*background*/, - out_buf + (y*output->width + x)*3/*RGB*/, - output->width*3/*row_stride*/, - NULL/*colormap for PNG_FORMAT_FLAG_COLORMAP*/)) - { - ++*argv, --*argc; - continue; - } - } - - /* The read failed: */ - fprintf(stderr, "simpleover: add sprite %s: %s\n", sprite->name, - in.message); - return 0; /* error */ - } - } - - else - { - fprintf(stderr, "simpleover: --add='%s': invalid position %s\n", - sprite->name, (*argv)[0]); - return 0; /* error */ - } - } - - return 1; /* ok */ -} - -static int -simpleover_process(png_imagep output, png_bytep out_buf, int argc, - const char **argv) -{ - int result = 1; /* success */ -# define csprites 10/*limit*/ -# define str(a) #a - int nsprites = 0; - struct sprite sprites[csprites]; - - while (argc > 0) - { - result = 0; /* fail */ - - if (strncmp(argv[0], "--sprite=", 9) == 0) - { - char tombstone; - - if (nsprites < csprites) - { - int n; - - sprites[nsprites].width = sprites[nsprites].height = 0; - sprites[nsprites].name[0] = 0; - - n = sscanf(argv[0], "--sprite=%u,%u,%" str(sprite_name_chars) "s%c", - &sprites[nsprites].width, &sprites[nsprites].height, - sprites[nsprites].name, &tombstone); - - if ((n == 2 || n == 3) && - sprites[nsprites].width > 0 && sprites[nsprites].height > 0) - { - size_t buf_size, tmp; - - /* Default a name if not given. */ - if (sprites[nsprites].name[0] == 0) - sprintf(sprites[nsprites].name, "sprite-%d", nsprites+1); - - /* Allocate a buffer for the sprite and calculate the buffer - * size: - */ - buf_size = sizeof (png_uint_16 [4]); - buf_size *= sprites[nsprites].width; - buf_size *= sprites[nsprites].height; - - /* This can overflow a (size_t); check for this: */ - tmp = buf_size; - tmp /= sprites[nsprites].width; - tmp /= sprites[nsprites].height; - - if (tmp == sizeof (png_uint_16 [4])) - { - sprites[nsprites].buffer = malloc(buf_size); - /* This buffer must be initialized to transparent: */ - memset(sprites[nsprites].buffer, 0, buf_size); - - if (sprites[nsprites].buffer != NULL) - { - sprites[nsprites].file = NULL; - ++argv, --argc; - - if (create_sprite(sprites+nsprites++, &argc, &argv)) - { - result = 1; /* still ok */ - continue; - } - - break; /* error */ - } - } - - /* Overflow, or OOM */ - fprintf(stderr, "simpleover: %s: sprite too large\n", argv[0]); - break; - } - - else - { - fprintf(stderr, "simpleover: %s: invalid sprite (%u,%u)\n", - argv[0], sprites[nsprites].width, sprites[nsprites].height); - break; - } - } - - else - { - fprintf(stderr, "simpleover: %s: too many sprites\n", argv[0]); - break; - } - } - - else if (strncmp(argv[0], "--add=", 6) == 0) - { - const char *name = argv[0]+6; - int isprite = nsprites; - - ++argv, --argc; - - while (--isprite >= 0) - { - if (strcmp(sprites[isprite].name, name) == 0) - { - if (!add_sprite(output, out_buf, sprites+isprite, &argc, &argv)) - goto out; /* error in add_sprite */ - - break; - } - } - - if (isprite < 0) /* sprite not found */ - { - fprintf(stderr, "simpleover: --add='%s': sprite not found\n", name); - break; - } - } - - else - { - fprintf(stderr, "simpleover: %s: unrecognized operation\n", argv[0]); - break; - } - - result = 1; /* ok */ - } - - /* Clean up the cache of sprites: */ -out: - while (--nsprites >= 0) - { - if (sprites[nsprites].buffer != NULL) - free(sprites[nsprites].buffer); - - if (sprites[nsprites].file != NULL) - (void)fclose(sprites[nsprites].file); - } - - return result; -} - -int main(int argc, const char **argv) -{ - int result = 1; /* default to fail */ - - if (argc >= 2) - { - int argi = 2; - const char *output = NULL; - png_image image; - - if (argc > 2 && argv[2][0] != '-'/*an operation*/) - { - output = argv[2]; - argi = 3; - } - - image.version = PNG_IMAGE_VERSION; - image.opaque = NULL; - - if (png_image_begin_read_from_file(&image, argv[1])) - { - png_bytep buffer; - - image.format = PNG_FORMAT_RGB; /* 24-bit RGB */ - - buffer = malloc(PNG_IMAGE_SIZE(image)); - - if (buffer != NULL) - { - png_color background = {0, 0xff, 0}; /* fully saturated green */ - - if (png_image_finish_read(&image, &background, buffer, - 0/*row_stride*/, NULL/*colormap for PNG_FORMAT_FLAG_COLORMAP */)) - { - /* At this point png_image_finish_read has cleaned up the - * allocated data in png_image, and only the buffer needs to be - * freed. - * - * Perform the remaining operations: - */ - if (simpleover_process(&image, buffer, argc-argi, argv+argi)) - { - /* Write the output: */ - if ((output != NULL && - png_image_write_to_file(&image, output, - 0/*convert_to_8bit*/, buffer, 0/*row_stride*/, - NULL/*colormap*/)) || - (output == NULL && - png_image_write_to_stdio(&image, stdout, - 0/*convert_to_8bit*/, buffer, 0/*row_stride*/, - NULL/*colormap*/))) - result = 0; - - else - fprintf(stderr, "simpleover: write %s: %s\n", - output == NULL ? "stdout" : output, image.message); - } - - /* else simpleover_process writes an error message */ - } - - else - fprintf(stderr, "simpleover: read %s: %s\n", argv[1], - image.message); - - free(buffer); - } - - else - { - fprintf(stderr, "simpleover: out of memory: %lu bytes\n", - (unsigned long)PNG_IMAGE_SIZE(image)); - - /* This is the only place where a 'free' is required; libpng does - * the cleanup on error and success, but in this case we couldn't - * complete the read because of running out of memory. - */ - png_image_free(&image); - } - } - - else - { - /* Failed to read the first argument: */ - fprintf(stderr, "simpleover: %s: %s\n", argv[1], image.message); - } - } - - else - { - /* Usage message */ - fprintf(stderr, - "simpleover: usage: simpleover background.png [output.png]\n" - " Output 'background.png' as a 24-bit RGB PNG file in 'output.png'\n" - " or, if not given, stdout. 'background.png' will be composited\n" - " on fully saturated green.\n" - "\n" - " Optionally, before output, process additional PNG files:\n" - "\n" - " --sprite=width,height,name {[--at=x,y] {sprite.png}}\n" - " Produce a transparent sprite of size (width,height) and with\n" - " name 'name'.\n" - " For each sprite.png composite it using a Porter-Duff 'Over'\n" - " operation at offset (x,y) in the sprite (defaulting to (0,0)).\n" - " Input PNGs will be truncated to the area of the sprite.\n" - "\n" - " --add='name' {x,y}\n" - " Optionally, before output, composite a sprite, 'name', which\n" - " must have been previously produced using --sprite, at each\n" - " offset (x,y) in the output image. Each sprite must fit\n" - " completely within the output image.\n" - "\n" - " PNG files are processed in the order they occur on the command\n" - " line and thus the first PNG processed appears as the bottommost\n" - " in the output image.\n"); - } - - return result; -} -#endif /* SIMPLIFIED_READ */ diff --git a/contrib/gregbook/COPYING b/contrib/gregbook/COPYING deleted file mode 100644 index a3e977479..000000000 --- a/contrib/gregbook/COPYING +++ /dev/null @@ -1,340 +0,0 @@ - GNU GENERAL PUBLIC LICENSE - Version 2, June 1991 - - Copyright (C) 1989, 1991 Free Software Foundation, Inc. - 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - Everyone is permitted to copy and distribute verbatim copies - of this license document, but changing it is not allowed. - - Preamble - - The licenses for most software are designed to take away your -freedom to share and change it. By contrast, the GNU General Public -License is intended to guarantee your freedom to share and change free -software--to make sure the software is free for all its users. This -General Public License applies to most of the Free Software -Foundation's software and to any other program whose authors commit to -using it. (Some other Free Software Foundation software is covered by -the GNU Library General Public License instead.) You can apply it to -your programs, too. - - When we speak of free software, we are referring to freedom, not -price. Our General Public Licenses are designed to make sure that you -have the freedom to distribute copies of free software (and charge for -this service if you wish), that you receive source code or can get it -if you want it, that you can change the software or use pieces of it -in new free programs; and that you know you can do these things. - - To protect your rights, we need to make restrictions that forbid -anyone to deny you these rights or to ask you to surrender the rights. -These restrictions translate to certain responsibilities for you if you -distribute copies of the software, or if you modify it. - - For example, if you distribute copies of such a program, whether -gratis or for a fee, you must give the recipients all the rights that -you have. You must make sure that they, too, receive or can get the -source code. And you must show them these terms so they know their -rights. - - We protect your rights with two steps: (1) copyright the software, and -(2) offer you this license which gives you legal permission to copy, -distribute and/or modify the software. - - Also, for each author's protection and ours, we want to make certain -that everyone understands that there is no warranty for this free -software. If the software is modified by someone else and passed on, we -want its recipients to know that what they have is not the original, so -that any problems introduced by others will not reflect on the original -authors' reputations. - - Finally, any free program is threatened constantly by software -patents. We wish to avoid the danger that redistributors of a free -program will individually obtain patent licenses, in effect making the -program proprietary. To prevent this, we have made it clear that any -patent must be licensed for everyone's free use or not licensed at all. - - The precise terms and conditions for copying, distribution and -modification follow. - - GNU GENERAL PUBLIC LICENSE - TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION - - 0. This License applies to any program or other work which contains -a notice placed by the copyright holder saying it may be distributed -under the terms of this General Public License. The "Program", below, -refers to any such program or work, and a "work based on the Program" -means either the Program or any derivative work under copyright law: -that is to say, a work containing the Program or a portion of it, -either verbatim or with modifications and/or translated into another -language. (Hereinafter, translation is included without limitation in -the term "modification".) Each licensee is addressed as "you". - -Activities other than copying, distribution and modification are not -covered by this License; they are outside its scope. The act of -running the Program is not restricted, and the output from the Program -is covered only if its contents constitute a work based on the -Program (independent of having been made by running the Program). -Whether that is true depends on what the Program does. - - 1. You may copy and distribute verbatim copies of the Program's -source code as you receive it, in any medium, provided that you -conspicuously and appropriately publish on each copy an appropriate -copyright notice and disclaimer of warranty; keep intact all the -notices that refer to this License and to the absence of any warranty; -and give any other recipients of the Program a copy of this License -along with the Program. - -You may charge a fee for the physical act of transferring a copy, and -you may at your option offer warranty protection in exchange for a fee. - - 2. You may modify your copy or copies of the Program or any portion -of it, thus forming a work based on the Program, and copy and -distribute such modifications or work under the terms of Section 1 -above, provided that you also meet all of these conditions: - - a) You must cause the modified files to carry prominent notices - stating that you changed the files and the date of any change. - - b) You must cause any work that you distribute or publish, that in - whole or in part contains or is derived from the Program or any - part thereof, to be licensed as a whole at no charge to all third - parties under the terms of this License. - - c) If the modified program normally reads commands interactively - when run, you must cause it, when started running for such - interactive use in the most ordinary way, to print or display an - announcement including an appropriate copyright notice and a - notice that there is no warranty (or else, saying that you provide - a warranty) and that users may redistribute the program under - these conditions, and telling the user how to view a copy of this - License. (Exception: if the Program itself is interactive but - does not normally print such an announcement, your work based on - the Program is not required to print an announcement.) - -These requirements apply to the modified work as a whole. If -identifiable sections of that work are not derived from the Program, -and can be reasonably considered independent and separate works in -themselves, then this License, and its terms, do not apply to those -sections when you distribute them as separate works. But when you -distribute the same sections as part of a whole which is a work based -on the Program, the distribution of the whole must be on the terms of -this License, whose permissions for other licensees extend to the -entire whole, and thus to each and every part regardless of who wrote it. - -Thus, it is not the intent of this section to claim rights or contest -your rights to work written entirely by you; rather, the intent is to -exercise the right to control the distribution of derivative or -collective works based on the Program. - -In addition, mere aggregation of another work not based on the Program -with the Program (or with a work based on the Program) on a volume of -a storage or distribution medium does not bring the other work under -the scope of this License. - - 3. You may copy and distribute the Program (or a work based on it, -under Section 2) in object code or executable form under the terms of -Sections 1 and 2 above provided that you also do one of the following: - - a) Accompany it with the complete corresponding machine-readable - source code, which must be distributed under the terms of Sections - 1 and 2 above on a medium customarily used for software interchange; or, - - b) Accompany it with a written offer, valid for at least three - years, to give any third party, for a charge no more than your - cost of physically performing source distribution, a complete - machine-readable copy of the corresponding source code, to be - distributed under the terms of Sections 1 and 2 above on a medium - customarily used for software interchange; or, - - c) Accompany it with the information you received as to the offer - to distribute corresponding source code. (This alternative is - allowed only for noncommercial distribution and only if you - received the program in object code or executable form with such - an offer, in accord with Subsection b above.) - -The source code for a work means the preferred form of the work for -making modifications to it. For an executable work, complete source -code means all the source code for all modules it contains, plus any -associated interface definition files, plus the scripts used to -control compilation and installation of the executable. However, as a -special exception, the source code distributed need not include -anything that is normally distributed (in either source or binary -form) with the major components (compiler, kernel, and so on) of the -operating system on which the executable runs, unless that component -itself accompanies the executable. - -If distribution of executable or object code is made by offering -access to copy from a designated place, then offering equivalent -access to copy the source code from the same place counts as -distribution of the source code, even though third parties are not -compelled to copy the source along with the object code. - - 4. You may not copy, modify, sublicense, or distribute the Program -except as expressly provided under this License. Any attempt -otherwise to copy, modify, sublicense or distribute the Program is -void, and will automatically terminate your rights under this License. -However, parties who have received copies, or rights, from you under -this License will not have their licenses terminated so long as such -parties remain in full compliance. - - 5. You are not required to accept this License, since you have not -signed it. However, nothing else grants you permission to modify or -distribute the Program or its derivative works. These actions are -prohibited by law if you do not accept this License. Therefore, by -modifying or distributing the Program (or any work based on the -Program), you indicate your acceptance of this License to do so, and -all its terms and conditions for copying, distributing or modifying -the Program or works based on it. - - 6. Each time you redistribute the Program (or any work based on the -Program), the recipient automatically receives a license from the -original licensor to copy, distribute or modify the Program subject to -these terms and conditions. You may not impose any further -restrictions on the recipients' exercise of the rights granted herein. -You are not responsible for enforcing compliance by third parties to -this License. - - 7. If, as a consequence of a court judgment or allegation of patent -infringement or for any other reason (not limited to patent issues), -conditions are imposed on you (whether by court order, agreement or -otherwise) that contradict the conditions of this License, they do not -excuse you from the conditions of this License. If you cannot -distribute so as to satisfy simultaneously your obligations under this -License and any other pertinent obligations, then as a consequence you -may not distribute the Program at all. For example, if a patent -license would not permit royalty-free redistribution of the Program by -all those who receive copies directly or indirectly through you, then -the only way you could satisfy both it and this License would be to -refrain entirely from distribution of the Program. - -If any portion of this section is held invalid or unenforceable under -any particular circumstance, the balance of the section is intended to -apply and the section as a whole is intended to apply in other -circumstances. - -It is not the purpose of this section to induce you to infringe any -patents or other property right claims or to contest validity of any -such claims; this section has the sole purpose of protecting the -integrity of the free software distribution system, which is -implemented by public license practices. Many people have made -generous contributions to the wide range of software distributed -through that system in reliance on consistent application of that -system; it is up to the author/donor to decide if he or she is willing -to distribute software through any other system and a licensee cannot -impose that choice. - -This section is intended to make thoroughly clear what is believed to -be a consequence of the rest of this License. - - 8. If the distribution and/or use of the Program is restricted in -certain countries either by patents or by copyrighted interfaces, the -original copyright holder who places the Program under this License -may add an explicit geographical distribution limitation excluding -those countries, so that distribution is permitted only in or among -countries not thus excluded. In such case, this License incorporates -the limitation as if written in the body of this License. - - 9. The Free Software Foundation may publish revised and/or new versions -of the General Public License from time to time. Such new versions will -be similar in spirit to the present version, but may differ in detail to -address new problems or concerns. - -Each version is given a distinguishing version number. If the Program -specifies a version number of this License which applies to it and "any -later version", you have the option of following the terms and conditions -either of that version or of any later version published by the Free -Software Foundation. If the Program does not specify a version number of -this License, you may choose any version ever published by the Free Software -Foundation. - - 10. If you wish to incorporate parts of the Program into other free -programs whose distribution conditions are different, write to the author -to ask for permission. For software which is copyrighted by the Free -Software Foundation, write to the Free Software Foundation; we sometimes -make exceptions for this. Our decision will be guided by the two goals -of preserving the free status of all derivatives of our free software and -of promoting the sharing and reuse of software generally. - - NO WARRANTY - - 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY -FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN -OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES -PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED -OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF -MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS -TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE -PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, -REPAIR OR CORRECTION. - - 12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING -WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR -REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, -INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING -OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED -TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY -YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER -PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE -POSSIBILITY OF SUCH DAMAGES. - - END OF TERMS AND CONDITIONS - - How to Apply These Terms to Your New Programs - - If you develop a new program, and you want it to be of the greatest -possible use to the public, the best way to achieve this is to make it -free software which everyone can redistribute and change under these terms. - - To do so, attach the following notices to the program. It is safest -to attach them to the start of each source file to most effectively -convey the exclusion of warranty; and each file should have at least -the "copyright" line and a pointer to where the full notice is found. - - - Copyright (C) - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - - -Also add information on how to contact you by electronic and paper mail. - -If the program is interactive, make it output a short notice like this -when it starts in an interactive mode: - - Gnomovision version 69, Copyright (C) year name of author - Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'. - This is free software, and you are welcome to redistribute it - under certain conditions; type `show c' for details. - -The hypothetical commands `show w' and `show c' should show the appropriate -parts of the General Public License. Of course, the commands you use may -be called something other than `show w' and `show c'; they could even be -mouse-clicks or menu items--whatever suits your program. - -You should also get your employer (if you work as a programmer) or your -school, if any, to sign a "copyright disclaimer" for the program, if -necessary. Here is a sample; alter the names: - - Yoyodyne, Inc., hereby disclaims all copyright interest in the program - `Gnomovision' (which makes passes at compilers) written by James Hacker. - - , 1 April 1989 - Ty Coon, President of Vice - -This General Public License does not permit incorporating your program into -proprietary programs. If your program is a subroutine library, you may -consider it more useful to permit linking proprietary applications with the -library. If this is what you want to do, use the GNU Library General -Public License instead of this License. diff --git a/contrib/gregbook/LICENSE b/contrib/gregbook/LICENSE deleted file mode 100644 index d9567178c..000000000 --- a/contrib/gregbook/LICENSE +++ /dev/null @@ -1,50 +0,0 @@ - --------------------------------------------------------------------------- - - Copyright (c) 1998-2008 Greg Roelofs. All rights reserved. - - This software is provided "as is," without warranty of any kind, - express or implied. In no event shall the author or contributors - be held liable for any damages arising in any way from the use of - this software. - - The contents of this file are DUAL-LICENSED. You may modify and/or - redistribute this software according to the terms of one of the - following two licenses (at your option): - - - LICENSE 1 ("BSD-like with advertising clause"): - - Permission is granted to anyone to use this software for any purpose, - including commercial applications, and to alter it and redistribute - it freely, subject to the following restrictions: - - 1. Redistributions of source code must retain the above copyright - notice, disclaimer, and this list of conditions. - 2. Redistributions in binary form must reproduce the above copyright - notice, disclaimer, and this list of conditions in the documenta- - tion and/or other materials provided with the distribution. - 3. All advertising materials mentioning features or use of this - software must display the following acknowledgment: - - This product includes software developed by Greg Roelofs - and contributors for the book, "PNG: The Definitive Guide," - published by O'Reilly and Associates. - - - LICENSE 2 (GNU GPL v2 or later): - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software Foundation, - Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - - --------------------------------------------------------------------------- diff --git a/contrib/gregbook/Makefile.mingw32 b/contrib/gregbook/Makefile.mingw32 deleted file mode 100644 index 3a3ff607e..000000000 --- a/contrib/gregbook/Makefile.mingw32 +++ /dev/null @@ -1,131 +0,0 @@ -# Sample makefile for rpng-win / rpng2-win / wpng using mingw32-gcc and make. -# Greg Roelofs -# Last modified: 2 June 2007 -# -# The programs built by this makefile are described in the book, -# "PNG: The Definitive Guide," by Greg Roelofs (O'Reilly and -# Associates, 1999). Go buy a copy, eh? Well, OK, it's not -# generally for sale anymore, but it's the thought that counts, -# right? (Hint: http://www.libpng.org/pub/png/book/ ) -# -# Invoke this makefile from a DOS-prompt window via: -# -# make -f Makefile.mingw32 -# -# This makefile assumes libpng and zlib have already been built or downloaded -# and are in subdirectories at the same level as the current subdirectory -# (as indicated by the PNGDIR and ZDIR macros below). It makes no assumptions -# at all about the mingw32 installation tree (W32DIR). Edit as appropriate. -# -# Note that the names of the dynamic and static libpng and zlib libraries -# used below may change in later releases of the libraries. This makefile -# builds both statically and dynamically linked executables by default. -# (You need only one set, but for testing it can be handy to have both.) - - -# macros -------------------------------------------------------------------- - -#PNGDIR = ../..# for libpng-x.y.z/contrib/gregbook builds -PNGDIR = ../libpng-win32 -PNGINC = -I$(PNGDIR) -PNGLIBd = $(PNGDIR)/libpng.dll.a # dynamically linked -PNGLIBs = $(PNGDIR)/libpng.a # statically linked, local libpng - -#ZDIR = ../../../zlib-win32# for libpng-x.y.z/contrib/gregbook builds -ZDIR = ../zlib-win32 -ZINC = -I$(ZDIR) -ZLIBd = $(ZDIR)/libzdll.a -ZLIBs = $(ZDIR)/libz.a - -# change this to be the path where mingw32 installs its stuff: -W32DIR = -#W32DIR = /usr/local/cross-tools/i386-mingw32msvc -W32INC = -I$(W32DIR)/include -W32LIB = $(W32DIR)/lib/libuser32.a $(W32DIR)/lib/libgdi32.a - -CC = gcc -#CC = i386-mingw32msvc-gcc # e.g., Linux -> Win32 cross-compilation -LD = $(CC) -RM = rm -f -CPPFLAGS = $(INCS) -CFLAGS = -O -Wall $(MINGW_CCFLAGS) -# [note that -Wall is a gcc-specific compilation flag ("most warnings on")] -# [-ansi, -pedantic and -W can also be used] -LDFLAGS = $(MINGW_LDFLAGS) -O = .o -E = .exe - -INCS = $(PNGINC) $(ZINC) $(W32INC) -RLIBSd = $(PNGLIBd) $(ZLIBd) $(W32LIB) -lm -RLIBSs = $(PNGLIBs) $(ZLIBs) $(W32LIB) -lm -WLIBSd = $(PNGLIBd) $(ZLIBd) -WLIBSs = $(PNGLIBs) $(ZLIBs) - -RPNG = rpng-win -RPNG2 = rpng2-win -WPNG = wpng - -ROBJSd = $(RPNG)$(O) readpng.pic$(O) -ROBJS2d = $(RPNG2)$(O) readpng2.pic$(O) -WOBJSd = $(WPNG)$(O) writepng.pic$(O) - -RPNGs = $(RPNG)-static -RPNG2s = $(RPNG2)-static -WPNGs = $(WPNG)-static - -ROBJSs = $(RPNG)$(O) readpng$(O) -ROBJS2s = $(RPNG2)$(O) readpng2$(O) -WOBJSs = $(WPNG)$(O) writepng$(O) - -STATIC_EXES = $(RPNGs)$(E) $(RPNG2s)$(E) $(WPNGs)$(E) -DYNAMIC_EXES = $(RPNG)$(E) $(RPNG2)$(E) $(WPNG)$(E) - -EXES = $(STATIC_EXES) $(DYNAMIC_EXES) - - -# implicit make rules ------------------------------------------------------- - -.c$(O): - $(CC) -c $(CPPFLAGS) $(CFLAGS) $< - -%.pic$(O): %.c - $(CC) -c $(CPPFLAGS) $(CFLAGS) -DPNG_BUILD_DLL -o $@ $< - - -# dependencies -------------------------------------------------------------- - -all: $(EXES) - -$(RPNGs)$(E): $(ROBJSs) - $(LD) $(LDFLAGS) -o $@ $(ROBJSs) $(RLIBSs) - -$(RPNG)$(E): $(ROBJSd) - $(LD) $(LDFLAGS) -o $@ $(ROBJSd) $(RLIBSd) - -$(RPNG2s)$(E): $(ROBJS2s) - $(LD) $(LDFLAGS) -o $@ $(ROBJS2s) $(RLIBSs) - -$(RPNG2)$(E): $(ROBJS2d) - $(LD) $(LDFLAGS) -o $@ $(ROBJS2d) $(RLIBSd) - -$(WPNGs)$(E): $(WOBJSs) - $(LD) $(LDFLAGS) -o $@ $(WOBJSs) $(WLIBSs) - -$(WPNG)$(E): $(WOBJSd) - $(LD) $(LDFLAGS) -o $@ $(WOBJSd) $(WLIBSd) - -$(RPNG)$(O): $(RPNG).c readpng.h -$(RPNG2)$(O): $(RPNG2).c readpng2.h -$(WPNG)$(O): $(WPNG).c writepng.h - -readpng$(O) readpng.pic$(O): readpng.c readpng.h -readpng2$(O) readpng2.pic$(O): readpng2.c readpng2.h -writepng$(O) writepng.pic$(O): writepng.c writepng.h - - -# maintenance --------------------------------------------------------------- - -clean: - $(RM) $(EXES) - $(RM) $(ROBJSs) $(ROBJS2s) $(WOBJSs) - $(RM) $(ROBJSd) $(ROBJS2d) $(WOBJSd) diff --git a/contrib/gregbook/Makefile.sgi b/contrib/gregbook/Makefile.sgi deleted file mode 100644 index 94d61b465..000000000 --- a/contrib/gregbook/Makefile.sgi +++ /dev/null @@ -1,105 +0,0 @@ -# Sample makefile for rpng-x / rpng2-x / wpng for SGI using cc and make. -# Greg Roelofs -# Last modified: 7 March 2002 -# -# The programs built by this makefile are described in the book, -# "PNG: The Definitive Guide," by Greg Roelofs (O'Reilly and -# Associates, 1999). Go buy a copy, eh? Buy some for friends -# and family, too. (Not that this is a blatant plug or anything.) -# -# Invoke this makefile from a shell prompt in the usual way; for example: -# -# make -f Makefile.sgi -# -# This makefile assumes libpng and zlib have already been built or downloaded -# and are both installed in /usr/local/{include,lib} (as indicated by the -# PNG* and Z* macros below). Edit as appropriate--choose only ONE each of -# the PNGINC, PNGLIB, ZINC and ZLIB lines. -# -# This makefile builds dynamically linked executables (against libpng and zlib, -# that is), but that can be changed by uncommenting the appropriate PNGLIB and -# ZLIB lines. - - -# macros -------------------------------------------------------------------- - -PNGINC = -I/usr/local/include/libpng16 -PNGLIB = -L/usr/local/lib -lpng16 # dynamically linked against libpng -#PNGLIB = /usr/local/lib/libpng16.a # statically linked against libpng -# or: -#PNGINC = -I../.. -#PNGLIB = -L../.. -lpng -#PNGLIB = ../../libpng.a - -ZINC = -I/usr/local/include -ZLIB = -L/usr/local/lib -lz # dynamically linked against zlib -#ZLIB = /usr/local/lib/libz.a # statically linked against zlib -#ZINC = -I../zlib -#ZLIB = -L../zlib -lz -#ZLIB = ../../../zlib/libz.a - -XINC = -I/usr/include/X11 # old-style, stock X distributions -XLIB = -L/usr/lib/X11 -lX11 -#XINC = -I/usr/openwin/include # Sun workstations (OpenWindows) -#XLIB = -L/usr/openwin/lib -lX11 -#XINC = -I/usr/X11R6/include # new X distributions (XFree86, etc.) -#XLIB = -L/usr/X11R6/lib -lX11 - -INCS = $(PNGINC) $(ZINC) $(XINC) -RLIBS = $(PNGLIB) $(ZLIB) $(XLIB) -lm -WLIBS = $(PNGLIB) $(ZLIB) - -CC = cc -LD = cc -RM = rm -f -# ABI must be the same as that used to build libpng. -ABI = -CPPFLAGS = -CFLAGS = $(ABI) -O -fullwarn $(INCS) -LDFLAGS = $(ABI) -O = .o -E = - -RPNG = rpng-x -RPNG2 = rpng2-x -WPNG = wpng - -ROBJS = $(RPNG)$(O) readpng$(O) -ROBJS2 = $(RPNG2)$(O) readpng2$(O) -WOBJS = $(WPNG)$(O) writepng$(O) - -EXES = $(RPNG)$(E) $(RPNG2)$(E) $(WPNG)$(E) - - -# implicit make rules ------------------------------------------------------- - -.c$(O): - $(CC) -c $(CPPFLAGS) $(CFLAGS) $< - - -# dependencies -------------------------------------------------------------- - -all: $(EXES) - -$(RPNG)$(E): $(ROBJS) - $(LD) $(LDFLAGS) -o $@ $(ROBJS) $(RLIBS) - -$(RPNG2)$(E): $(ROBJS2) - $(LD) $(LDFLAGS) -o $@ $(ROBJS2) $(RLIBS) - -$(WPNG)$(E): $(WOBJS) - $(LD) $(LDFLAGS) -o $@ $(WOBJS) $(WLIBS) - -$(RPNG)$(O): $(RPNG).c readpng.h -$(RPNG2)$(O): $(RPNG2).c readpng2.h -$(WPNG)$(O): $(WPNG).c writepng.h - -readpng$(O): readpng.c readpng.h -readpng2$(O): readpng2.c readpng2.h -writepng$(O): writepng.c writepng.h - - -# maintenance --------------------------------------------------------------- - -clean: - $(RM) $(EXES) $(ROBJS) $(ROBJS2) $(WOBJS) diff --git a/contrib/gregbook/Makefile.unx b/contrib/gregbook/Makefile.unx deleted file mode 100644 index 1a73e03bf..000000000 --- a/contrib/gregbook/Makefile.unx +++ /dev/null @@ -1,134 +0,0 @@ -# Sample makefile for rpng-x / rpng2-x / wpng using gcc and make. -# Greg Roelofs -# Last modified: 2 June 2007 -# -# The programs built by this makefile are described in the book, -# "PNG: The Definitive Guide," by Greg Roelofs (O'Reilly and -# Associates, 1999). Go buy a copy, eh? Well, OK, it's not -# generally for sale anymore, but it's the thought that counts, -# right? (Hint: http://www.libpng.org/pub/png/book/ ) -# -# Invoke this makefile from a shell prompt in the usual way; for example: -# -# make -f Makefile.unx -# -# This makefile assumes libpng and zlib have already been built or downloaded -# and are installed in /usr/local/{include,lib} or as otherwise indicated by -# the PNG* and Z* macros below. Edit as appropriate--choose only ONE each of -# the PNGINC, PNGLIBd, PNGLIBs, ZINC, ZLIBd and ZLIBs lines. -# -# This makefile builds both dynamically and statically linked executables -# (against libpng and zlib, that is), but that can be changed by modifying -# the "EXES =" line. (You need only one set, but for testing it can be handy -# to have both.) - - -# macros -------------------------------------------------------------------- - -#PNGDIR = /usr/local/lib -#PNGINC = -I/usr/local/include/libpng16 -#PNGLIBd = -L$(PNGDIR) -lpng16 # dynamically linked, installed libpng -#PNGLIBs = $(PNGDIR)/libpng16.a # statically linked, installed libpng -# or: -PNGDIR = ../..# this one is for libpng-x.y.z/contrib/gregbook builds -#PNGDIR = ../libpng -PNGINC = -I$(PNGDIR) -PNGLIBd = -Wl,-rpath,$(PNGDIR) -L$(PNGDIR) -lpng16 # dynamically linked -PNGLIBs = $(PNGDIR)/libpng.a # statically linked, local libpng - -ZDIR = /usr/local/lib -#ZDIR = /usr/lib64 -ZINC = -I/usr/local/include -ZLIBd = -L$(ZDIR) -lz # dynamically linked against zlib -ZLIBs = $(ZDIR)/libz.a # statically linked against zlib -# or: -#ZDIR = ../zlib -#ZINC = -I$(ZDIR) -#ZLIBd = -Wl,-rpath,$(ZDIR) -L$(ZDIR) -lz # -rpath allows in-place testing -#ZLIBs = $(ZDIR)/libz.a - -#XINC = -I/usr/include # old-style, stock X distributions -#XLIB = -L/usr/lib/X11 -lX11 # (including SGI IRIX) -#XINC = -I/usr/openwin/include # Sun workstations (OpenWindows) -#XLIB = -L/usr/openwin/lib -lX11 -XINC = -I/usr/X11R6/include # new X distributions (X.org, etc.) -XLIB = -L/usr/X11R6/lib -lX11 -#XLIB = -L/usr/X11R6/lib64 -lX11 # e.g., Red Hat on AMD64 - -INCS = $(PNGINC) $(ZINC) $(XINC) -RLIBSd = $(PNGLIBd) $(ZLIBd) $(XLIB) -lm -RLIBSs = $(PNGLIBs) $(ZLIBs) $(XLIB) -lm -WLIBSd = $(PNGLIBd) $(ZLIBd) -lm -WLIBSs = $(PNGLIBs) $(ZLIBs) -lm - -CC = gcc -LD = gcc -RM = rm -f -CPPFLAGS = $(INCS) -DFEATURE_LOOP -CFLAGS = -O -Wall -#CFLAGS = -O -W -Wall -Wextra -pedantic -ansi -# [note that -Wall is a gcc-specific compilation flag ("most warnings on")] -# [-ansi, -pedantic, -Wextra, and -W can also be used] -LDFLAGS = -O = .o -E = - -RPNG = rpng-x -RPNG2 = rpng2-x -WPNG = wpng - -RPNGs = $(RPNG)-static -RPNG2s = $(RPNG2)-static -WPNGs = $(WPNG)-static - -ROBJS = $(RPNG)$(O) readpng$(O) -ROBJS2 = $(RPNG2)$(O) readpng2$(O) -WOBJS = $(WPNG)$(O) writepng$(O) - -STATIC_EXES = $(RPNGs)$(E) $(RPNG2s)$(E) $(WPNGs)$(E) -DYNAMIC_EXES = $(RPNG)$(E) $(RPNG2)$(E) $(WPNG)$(E) - -EXES = $(STATIC_EXES) $(DYNAMIC_EXES) - - -# implicit make rules ------------------------------------------------------- - -.c$(O): - $(CC) -c $(CPPFLAGS) $(CFLAGS) $< - - -# dependencies -------------------------------------------------------------- - -all: $(EXES) - -$(RPNGs)$(E): $(ROBJS) - $(LD) $(LDFLAGS) -o $@ $(ROBJS) $(RLIBSs) - -$(RPNG)$(E): $(ROBJS) - $(LD) $(LDFLAGS) -o $@ $(ROBJS) $(RLIBSd) - -$(RPNG2s)$(E): $(ROBJS2) - $(LD) $(LDFLAGS) -o $@ $(ROBJS2) $(RLIBSs) - -$(RPNG2)$(E): $(ROBJS2) - $(LD) $(LDFLAGS) -o $@ $(ROBJS2) $(RLIBSd) - -$(WPNGs)$(E): $(WOBJS) - $(LD) $(LDFLAGS) -o $@ $(WOBJS) $(WLIBSs) - -$(WPNG)$(E): $(WOBJS) - $(LD) $(LDFLAGS) -o $@ $(WOBJS) $(WLIBSd) - -$(RPNG)$(O): $(RPNG).c readpng.h -$(RPNG2)$(O): $(RPNG2).c readpng2.h -$(WPNG)$(O): $(WPNG).c writepng.h - -readpng$(O): readpng.c readpng.h -readpng2$(O): readpng2.c readpng2.h -writepng$(O): writepng.c writepng.h - - -# maintenance --------------------------------------------------------------- - -clean: - $(RM) $(EXES) $(ROBJS) $(ROBJS2) $(WOBJS) diff --git a/contrib/gregbook/Makefile.w32 b/contrib/gregbook/Makefile.w32 deleted file mode 100644 index ab7dcf7ca..000000000 --- a/contrib/gregbook/Makefile.w32 +++ /dev/null @@ -1,114 +0,0 @@ -# Sample makefile for rpng-win / rpng2-win / wpng using MSVC and NMAKE. -# Greg Roelofs -# Last modified: 2 June 2007 -# -# The programs built by this makefile are described in the book, -# "PNG: The Definitive Guide," by Greg Roelofs (O'Reilly and -# Associates, 1999). Go buy a copy, eh? Well, OK, it's not -# generally for sale anymore, but it's the thought that counts, -# right? (Hint: http://www.libpng.org/pub/png/book/ ) -# -# Invoke this makefile from a DOS prompt window via: -# -# %devstudio%\vc\bin\vcvars32.bat -# nmake -nologo -f Makefile.w32 -# -# where %devstudio% is the installation directory for MSVC / DevStudio. If -# you get "environment out of space" errors, create a desktop shortcut with -# "c:\windows\command.com /e:4096" as the program command line and set the -# working directory to this directory. Then double-click to open the new -# DOS-prompt window with a bigger environment and retry the commands above. -# -# This makefile assumes libpng and zlib have already been built or downloaded -# and are in subdirectories at the same level as the current subdirectory -# (as indicated by the PNGPATH and ZPATH macros below). Edit as appropriate. -# -# Note that the names of the dynamic and static libpng and zlib libraries -# used below may change in later releases of the libraries. This makefile -# builds statically linked executables, but that can be changed by uncom- -# menting the appropriate PNGLIB and ZLIB lines. - -!include - - -# macros -------------------------------------------------------------------- - -PNGPATH = ../libpng -PNGINC = -I$(PNGPATH) -#PNGLIB = $(PNGPATH)/pngdll.lib -PNGLIB = $(PNGPATH)/libpng.lib - -ZPATH = ../zlib -ZINC = -I$(ZPATH) -#ZLIB = $(ZPATH)/zlibdll.lib -ZLIB = $(ZPATH)/zlibstat.lib - -WINLIBS = -defaultlib:user32.lib gdi32.lib -# ["real" apps may also need comctl32.lib, comdlg32.lib, winmm.lib, etc.] - -INCS = $(PNGINC) $(ZINC) -RLIBS = $(PNGLIB) $(ZLIB) $(WINLIBS) -WLIBS = $(PNGLIB) $(ZLIB) - -CC = cl -LD = link -RM = del -CPPFLAGS = $(INCS) -CFLAGS = -nologo -O -W3 $(cvars) -# [note that -W3 is an MSVC-specific compilation flag ("all warnings on")] -# [see %devstudio%\vc\include\win32.mak for cvars macro definition] -O = .obj -E = .exe - -RLDFLAGS = -nologo -subsystem:windows -WLDFLAGS = -nologo - -RPNG = rpng-win -RPNG2 = rpng2-win -WPNG = wpng - -ROBJS = $(RPNG)$(O) readpng$(O) -ROBJS2 = $(RPNG2)$(O) readpng2$(O) -WOBJS = $(WPNG)$(O) writepng$(O) - -EXES = $(RPNG)$(E) $(RPNG2)$(E) $(WPNG)$(E) - - -# implicit make rules ------------------------------------------------------- - -.c$(O): - $(CC) -c $(CPPFLAGS) $(CFLAGS) $< - - -# dependencies -------------------------------------------------------------- - -all: $(EXES) - -$(RPNG)$(E): $(ROBJS) - $(LD) $(RLDFLAGS) -out:$@ $(ROBJS) $(RLIBS) - -$(RPNG2)$(E): $(ROBJS2) - $(LD) $(RLDFLAGS) -out:$@ $(ROBJS2) $(RLIBS) - -$(WPNG)$(E): $(WOBJS) - $(LD) $(WLDFLAGS) -out:$@ $(WOBJS) $(WLIBS) - -$(RPNG)$(O): $(RPNG).c readpng.h -$(RPNG2)$(O): $(RPNG2).c readpng2.h -$(WPNG)$(O): $(WPNG).c writepng.h - -readpng$(O): readpng.c readpng.h -readpng2$(O): readpng2.c readpng2.h -writepng$(O): writepng.c writepng.h - - -# maintenance --------------------------------------------------------------- - -clean: -# ideally we could just do this: -# $(RM) $(EXES) $(ROBJS) $(ROBJS2) $(WOBJS) -# ...but the Windows "DEL" command is none too bright, so: - $(RM) r*$(E) - $(RM) w*$(E) - $(RM) r*$(O) - $(RM) w*$(O) diff --git a/contrib/gregbook/README b/contrib/gregbook/README deleted file mode 100644 index 90e28f7ce..000000000 --- a/contrib/gregbook/README +++ /dev/null @@ -1,186 +0,0 @@ - =========================== - PNG: The Definitive Guide - =========================== - - Source Code - -Chapters 13, 14 and 15 of "PNG: The Definitive Guide" discuss three free, -cross-platform demo programs that show how to use the libpng reference -library: rpng, rpng2 and wpng. rpng and rpng2 are viewers; the first is -a very simple example that that shows how a standard file-viewer might use -libpng, while the second is designed to process streaming data and shows -how a web browser might be written. wpng is a simple command-line program -that reads binary PGM and PPM files (the ``raw'' grayscale and RGB subsets -of PBMPLUS/NetPBM) and converts them to PNG. - -The source code for all three demo programs currently compiles under -Unix, OpenVMS, and 32-bit Windows. (Special thanks to Martin Zinser, -zinser at decus.de, for making the necessary changes for OpenVMS and for -providing an appropriate build script.) Build instructions can be found -below. - -Files: - - README this file - LICENSE terms of distribution and reuse (BSD-like or GNU GPL) - COPYING GNU General Public License (GPL) - - Makefile.unx Unix makefile - Makefile.w32 Windows (MSVC) makefile - makevms.com OpenVMS build script - - rpng-win.c Windows front end for the basic viewer - rpng-x.c X Window System (Unix, OpenVMS) front end - readpng.c generic back end for the basic viewer - readpng.h header file for the basic viewer - - rpng2-win.c Windows front end for the progressive viewer - rpng2-x.c X front end for the progressive viewer - readpng2.c generic back end for the progressive viewer - readpng2.h header file for the progressive viewer - - wpng.c generic (text) front end for the converter - writepng.c generic back end for the converter - writepng.h header file for the converter - - toucan.png transparent PNG for testing (by Stefan Schneider) - -Note that, although the programs are designed to be functional, their -primary purpose is to illustrate how to use libpng to add PNG support to -other programs. As such, their user interfaces are crude and definitely -are not intended for everyday use. - -Please see http://www.libpng.org/pub/png/pngbook.html for further infor- -mation and links to the latest version of the source code, and Chapters -13-15 of the book for detailed discussion of the three programs. - -Greg Roelofs -https://pobox.com/~newt/greg_contact.html -16 March 2008 - - -BUILD INSTRUCTIONS - - - Prerequisites (in order of compilation): - - - zlib https://zlib.net/ - - libpng http://www.libpng.org/pub/png/libpng.html - - pngbook http://www.libpng.org/pub/png/book/sources.html - - The pngbook demo programs are explicitly designed to demonstrate proper - coding techniques for using the libpng reference library. As a result, - you need to download and build both zlib (on which libpng depends) and - libpng. A common build setup is to place the zlib, libpng and pngbook - subdirectory trees ("folders") in the same parent directory. Then the - libpng build can refer to files in ../zlib (or ..\zlib or [-.zlib]), - and similarly for the pngbook build. - - Note that all three packages are designed to be built from a command - line by default; those who wish to use a graphical or other integrated - development environments are on their own. - - - - Unix: - - Unpack the latest pngbook sources (which should correspond to this - README file) into a directory and change into that directory. - - Copy Makefile.unx to Makefile and edit the PNG* and Z* variables - appropriately (possibly also the X* variables if necessary). - - make - - There is no "install" target, so copy the three executables somewhere - in your path or run them from the current directory. All three will - print a basic usage screen when run without any command-line arguments; - see the book for more details. - - - - Windows: - - Unpack the latest pngbook sources (which should correspond to this - README file) into a folder, open a "DOS shell" or "command prompt" - or equivalent command-line window, and cd into the folder where you - unpacked the source code. - - For MSVC, set up the necessary environment variables by invoking - - %devstudio%\vc\bin\vcvars32.bat - - where where %devstudio% is the installation directory for MSVC / - DevStudio. If you get "environment out of space" errors under 95/98, - create a desktop shortcut with "c:\windows\command.com /e:4096" as - the program command line and set the working directory to the pngbook - directory. Then double-click to open the new DOS-prompt window with - a bigger environment and retry the commands above. - - Copy Makefile.w32 to Makefile and edit the PNGPATH and ZPATH variables - appropriately (possibly also the "INC" and "LIB" variables if needed). - Note that the names of the dynamic and static libpng and zlib libraries - used in the makefile may change in later releases of the libraries. - Also note that, as of libpng version 1.0.5, MSVC DLL builds do not work. - This makefile therefore builds statically linked executables, but if - the DLL problems ever get fixed, uncommenting the appropriate PNGLIB - and ZLIB lines will build dynamically linked executables instead. - - Do the build by typing - - nmake - - The result should be three executables: rpng-win.exe, rpng2-win.exe, - and wpng.exe. Copy them somewhere in your PATH or run them from the - current folder. Like the Unix versions, the two windowed programs - (rpng and rpng2) now display a usage screen in a console window when - invoked without command-line arguments; this is new behavior as of - the June 2001 release. Note that the programs use the Unix-style "-" - character to specify options, instead of the more common DOS/Windows - "/" character. (For example: "rpng2-win -bgpat 4 foo.png", not - "rpng2-win /bgpat 4 foo.png") - - - - OpenVMS: - - Unpack the pngbook sources into a subdirectory and change into that - subdirectory. - - Edit makevms.com appropriately, specifically the zpath and pngpath - variables. - - @makevms - - To run the programs, they probably first need to be set up as "foreign - symbols," with "disk" and "dir" set appropriately: - - $ rpng == "$disk:[dir]rpng-x.exe" - $ rpng2 == "$disk:[dir]rpng2-x.exe" - $ wpng == "$disk:[dir]wpng.exe" - - All three will print a basic usage screen when run without any command- - line arguments; see the book for more details. Note that the options - style is Unix-like, i.e., preceded by "-" rather than "/". - - -RUNNING THE PROGRAMS: (VERY) BRIEF INTRO - - rpng is a simple PNG viewer that can display transparent PNGs with a - specified background color; for example, - - rpng -bgcolor \#ff0000 toucan.png - - would display the image with a red background. rpng2 is a progressive - viewer that simulates a web browser in some respects; it can display - images against either a background color or a dynamically generated - background image. For example: - - rpng2 -bgpat 16 toucan.png - - wpng is a purely command-line image converter from binary PBMPLUS/NetPBM - format (.pgm or .ppm) to PNG; for example, - - wpng -time < toucan-notrans.ppm > toucan-notrans.png - - would convert the specified PPM file (using redirection) to PNG, auto- - matically setting the PNG modification-time chunk. - - All options can be abbreviated to the shortest unique value; for example, - "-bgc" for -bgcolor (versus "-bgp" for -bgpat), or "-g" for -gamma. diff --git a/contrib/gregbook/makevms.com b/contrib/gregbook/makevms.com deleted file mode 100644 index f32bcaba7..000000000 --- a/contrib/gregbook/makevms.com +++ /dev/null @@ -1,132 +0,0 @@ -$!------------------------------------------------------------------------------ -$! make "PNG: The Definitive Guide" demo programs (for X) under OpenVMS -$! -$! Script created by Martin Zinser for libpng; modified by Greg Roelofs -$! for standalone pngbook source distribution. -$! -$! -$! Set locations where zlib and libpng sources live. -$! -$ zpath = "" -$ pngpath = "" -$! -$ if f$search("[---.zlib]zlib.h").nes."" then zpath = "[---.zlib]" -$ if f$search("[--]png.h").nes."" then pngpath = "[--]" -$! -$ if f$search("[-.zlib]zlib.h").nes."" then zpath = "[-.zlib]" -$ if f$search("[-.libpng]png.h").nes."" then pngpath = "[-.libpng]" -$! -$ if zpath .eqs. "" -$ then -$ write sys$output "zlib include not found. Exiting..." -$ exit 2 -$ endif -$! -$ if pngpath .eqs. "" -$ then -$ write sys$output "libpng include not found. Exiting..." -$ exit 2 -$ endif -$! -$! Look for the compiler used. -$! -$ ccopt="/include=(''zpath',''pngpath')" -$ if f$getsyi("HW_MODEL").ge.1024 -$ then -$ ccopt = "/prefix=all"+ccopt -$ comp = "__decc__=1" -$ if f$trnlnm("SYS").eqs."" then define sys sys$library: -$ else -$ if f$search("SYS$SYSTEM:DECC$COMPILER.EXE").eqs."" -$ then -$ if f$trnlnm("SYS").eqs."" then define sys sys$library: -$ if f$search("SYS$SYSTEM:VAXC.EXE").eqs."" -$ then -$ comp = "__gcc__=1" -$ CC :== GCC -$ else -$ comp = "__vaxc__=1" -$ endif -$ else -$ if f$trnlnm("SYS").eqs."" then define sys decc$library_include: -$ ccopt = "/decc/prefix=all"+ccopt -$ comp = "__decc__=1" -$ endif -$ endif -$ open/write lopt lib.opt -$ write lopt "''pngpath'libpng.olb/lib" -$ write lopt "''zpath'libz.olb/lib" -$ close lopt -$ open/write xopt x11.opt -$ write xopt "sys$library:decw$xlibshr.exe/share" -$ close xopt -$! -$! Build 'em. -$! -$ write sys$output "Compiling PNG book programs ..." -$ CALL MAKE readpng.OBJ "cc ''CCOPT' readpng" - - readpng.c readpng.h -$ CALL MAKE readpng2.OBJ "cc ''CCOPT' readpng2" - - readpng2.c readpng2.h -$ CALL MAKE writepng.OBJ "cc ''CCOPT' writepng" - - writepng.c writepng.h -$ write sys$output "Building rpng-x..." -$ CALL MAKE rpng-x.OBJ "cc ''CCOPT' rpng-x" - - rpng-x.c readpng.h -$ call make rpng-x.exe - - "LINK rpng-x,readpng,lib.opt/opt,x11.opt/opt" - - rpng-x.obj readpng.obj -$ write sys$output "Building rpng2-x..." -$ CALL MAKE rpng2-x.OBJ "cc ''CCOPT' rpng2-x" - - rpng2-x.c readpng2.h -$ call make rpng2-x.exe - - "LINK rpng2-x,readpng2,lib.opt/opt,x11.opt/opt" - - rpng2-x.obj readpng2.obj -$ write sys$output "Building wpng..." -$ CALL MAKE wpng.OBJ "cc ''CCOPT' wpng" - - wpng.c writepng.h -$ call make wpng.exe - - "LINK wpng,writepng,lib.opt/opt" - - wpng.obj writepng.obj -$ exit -$! -$! -$MAKE: SUBROUTINE !SUBROUTINE TO CHECK DEPENDENCIES -$ V = 'F$Verify(0) -$! P1 = What we are trying to make -$! P2 = Command to make it -$! P3 - P8 What it depends on -$ -$ If F$Search(P1) .Eqs. "" Then Goto Makeit -$ Time = F$CvTime(F$File(P1,"RDT")) -$arg=3 -$Loop: -$ Argument = P'arg -$ If Argument .Eqs. "" Then Goto Exit -$ El=0 -$Loop2: -$ File = F$Element(El," ",Argument) -$ If File .Eqs. " " Then Goto Endl -$ AFile = "" -$Loop3: -$ OFile = AFile -$ AFile = F$Search(File) -$ If AFile .Eqs. "" .Or. AFile .Eqs. OFile Then Goto NextEl -$ If F$CvTime(F$File(AFile,"RDT")) .Ges. Time Then Goto Makeit -$ Goto Loop3 -$NextEL: -$ El = El + 1 -$ Goto Loop2 -$EndL: -$ arg=arg+1 -$ If arg .Le. 8 Then Goto Loop -$ Goto Exit -$ -$Makeit: -$ VV=F$VERIFY(0) -$ write sys$output P2 -$ 'P2 -$ VV='F$Verify(VV) -$Exit: -$ If V Then Set Verify -$ENDSUBROUTINE diff --git a/contrib/gregbook/readpng.c b/contrib/gregbook/readpng.c deleted file mode 100644 index fad9b536a..000000000 --- a/contrib/gregbook/readpng.c +++ /dev/null @@ -1,323 +0,0 @@ -/*--------------------------------------------------------------------------- - - rpng - simple PNG display program readpng.c - - --------------------------------------------------------------------------- - - Copyright (c) 1998-2007,2017 Greg Roelofs. All rights reserved. - - This software is provided "as is," without warranty of any kind, - express or implied. In no event shall the author or contributors - be held liable for any damages arising in any way from the use of - this software. - - The contents of this file are DUAL-LICENSED. You may modify and/or - redistribute this software according to the terms of one of the - following two licenses (at your option): - - - LICENSE 1 ("BSD-like with advertising clause"): - - Permission is granted to anyone to use this software for any purpose, - including commercial applications, and to alter it and redistribute - it freely, subject to the following restrictions: - - 1. Redistributions of source code must retain the above copyright - notice, disclaimer, and this list of conditions. - 2. Redistributions in binary form must reproduce the above copyright - notice, disclaimer, and this list of conditions in the documenta- - tion and/or other materials provided with the distribution. - 3. All advertising materials mentioning features or use of this - software must display the following acknowledgment: - - This product includes software developed by Greg Roelofs - and contributors for the book, "PNG: The Definitive Guide," - published by O'Reilly and Associates. - - - LICENSE 2 (GNU GPL v2 or later): - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software Foundation, - Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - - ---------------------------------------------------------------------------*/ - -#include -#include -#include - -#include "png.h" /* libpng header */ -#include "readpng.h" /* typedefs, common macros, public prototypes */ - -/* future versions of libpng will provide this macro: */ -#ifndef png_jmpbuf -# define png_jmpbuf(png_ptr) ((png_ptr)->jmpbuf) -#endif - - -static png_structp png_ptr = NULL; -static png_infop info_ptr = NULL; - -png_uint_32 width, height; -int bit_depth, color_type; -uch *image_data = NULL; - - -void readpng_version_info(void) -{ - fprintf(stderr, " Compiled with libpng %s; using libpng %s.\n", - PNG_LIBPNG_VER_STRING, png_libpng_ver); - fprintf(stderr, " Compiled with zlib %s; using zlib %s.\n", - ZLIB_VERSION, zlib_version); -} - - -/* return value = 0 for success, 1 for bad sig, 2 for bad IHDR, 4 for no mem */ - -int readpng_init(FILE *infile, ulg *pWidth, ulg *pHeight) -{ - uch sig[8]; - - - /* first do a quick check that the file really is a PNG image; could - * have used slightly more general png_sig_cmp() function instead */ - - fread(sig, 1, 8, infile); - if (png_sig_cmp(sig, 0, 8)) - return 1; /* bad signature */ - - - /* could pass pointers to user-defined error handlers instead of NULLs: */ - - png_ptr = png_create_read_struct(png_get_libpng_ver(NULL), NULL, NULL, - NULL); - if (!png_ptr) - return 4; /* out of memory */ - - info_ptr = png_create_info_struct(png_ptr); - if (!info_ptr) { - png_destroy_read_struct(&png_ptr, NULL, NULL); - return 4; /* out of memory */ - } - - - /* we could create a second info struct here (end_info), but it's only - * useful if we want to keep pre- and post-IDAT chunk info separated - * (mainly for PNG-aware image editors and converters) */ - - - /* setjmp() must be called in every function that calls a PNG-reading - * libpng function */ - - if (setjmp(png_jmpbuf(png_ptr))) { - png_destroy_read_struct(&png_ptr, &info_ptr, NULL); - return 2; - } - - - png_init_io(png_ptr, infile); - png_set_sig_bytes(png_ptr, 8); /* we already read the 8 signature bytes */ - - png_read_info(png_ptr, info_ptr); /* read all PNG info up to image data */ - - - /* alternatively, could make separate calls to png_get_image_width(), - * etc., but want bit_depth and color_type for later [don't care about - * compression_type and filter_type => NULLs] */ - - png_get_IHDR(png_ptr, info_ptr, &width, &height, &bit_depth, &color_type, - NULL, NULL, NULL); - *pWidth = width; - *pHeight = height; - - - /* OK, that's all we need for now; return happy */ - - return 0; -} - - - - -/* returns 0 if succeeds, 1 if fails due to no bKGD chunk, 2 if libpng error; - * scales values to 8-bit if necessary */ - -int readpng_get_bgcolor(uch *red, uch *green, uch *blue) -{ - png_color_16p pBackground; - - - /* setjmp() must be called in every function that calls a PNG-reading - * libpng function */ - - if (setjmp(png_jmpbuf(png_ptr))) { - png_destroy_read_struct(&png_ptr, &info_ptr, NULL); - return 2; - } - - - if (!png_get_valid(png_ptr, info_ptr, PNG_INFO_bKGD)) - return 1; - - /* it is not obvious from the libpng documentation, but this function - * takes a pointer to a pointer, and it always returns valid red, green - * and blue values, regardless of color_type: */ - - png_get_bKGD(png_ptr, info_ptr, &pBackground); - - - /* however, it always returns the raw bKGD data, regardless of any - * bit-depth transformations, so check depth and adjust if necessary */ - - if (bit_depth == 16) { - *red = pBackground->red >> 8; - *green = pBackground->green >> 8; - *blue = pBackground->blue >> 8; - } else if (color_type == PNG_COLOR_TYPE_GRAY && bit_depth < 8) { - if (bit_depth == 1) - *red = *green = *blue = pBackground->gray? 255 : 0; - else if (bit_depth == 2) - *red = *green = *blue = (255/3) * pBackground->gray; - else /* bit_depth == 4 */ - *red = *green = *blue = (255/15) * pBackground->gray; - } else { - *red = (uch)pBackground->red; - *green = (uch)pBackground->green; - *blue = (uch)pBackground->blue; - } - - return 0; -} - - - - -/* display_exponent == LUT_exponent * CRT_exponent */ - -uch *readpng_get_image(double display_exponent, int *pChannels, ulg *pRowbytes) -{ - double gamma; - png_uint_32 i, rowbytes; - png_bytepp row_pointers = NULL; - - - /* setjmp() must be called in every function that calls a PNG-reading - * libpng function */ - - if (setjmp(png_jmpbuf(png_ptr))) { - free(image_data); - image_data = NULL; - free(row_pointers); - row_pointers = NULL; - png_destroy_read_struct(&png_ptr, &info_ptr, NULL); - return NULL; - } - - - /* expand palette images to RGB, low-bit-depth grayscale images to 8 bits, - * transparency chunks to full alpha channel; strip 16-bit-per-sample - * images to 8 bits per sample; and convert grayscale to RGB[A] */ - - if (color_type == PNG_COLOR_TYPE_PALETTE) - png_set_expand(png_ptr); - if (color_type == PNG_COLOR_TYPE_GRAY && bit_depth < 8) - png_set_expand(png_ptr); - if (png_get_valid(png_ptr, info_ptr, PNG_INFO_tRNS)) - png_set_expand(png_ptr); -#ifdef PNG_READ_16_TO_8_SUPPORTED - if (bit_depth == 16) -# ifdef PNG_READ_SCALE_16_TO_8_SUPPORTED - png_set_scale_16(png_ptr); -# else - png_set_strip_16(png_ptr); -# endif -#endif - if (color_type == PNG_COLOR_TYPE_GRAY || - color_type == PNG_COLOR_TYPE_GRAY_ALPHA) - png_set_gray_to_rgb(png_ptr); - - - /* unlike the example in the libpng documentation, we have *no* idea where - * this file may have come from--so if it doesn't have a file gamma, don't - * do any correction ("do no harm") */ - - if (png_get_gAMA(png_ptr, info_ptr, &gamma)) - png_set_gamma(png_ptr, display_exponent, gamma); - - - /* all transformations have been registered; now update info_ptr data, - * get rowbytes and channels, and allocate image memory */ - - png_read_update_info(png_ptr, info_ptr); - - *pRowbytes = rowbytes = png_get_rowbytes(png_ptr, info_ptr); - *pChannels = (int)png_get_channels(png_ptr, info_ptr); - - /* Guard against integer overflow */ - if (height > ((size_t)(-1))/rowbytes) { - fprintf(stderr, "readpng: image_data buffer would be too large\n", - return NULL; - } - - if ((image_data = (uch *)malloc(rowbytes*height)) == NULL) { - png_destroy_read_struct(&png_ptr, &info_ptr, NULL); - return NULL; - } - if ((row_pointers = (png_bytepp)malloc(height*sizeof(png_bytep))) == NULL) { - png_destroy_read_struct(&png_ptr, &info_ptr, NULL); - free(image_data); - image_data = NULL; - return NULL; - } - - Trace((stderr, "readpng_get_image: channels = %d, rowbytes = %ld, height = %ld\n", - *pChannels, rowbytes, height)); - - - /* set the individual row_pointers to point at the correct offsets */ - - for (i = 0; i < height; ++i) - row_pointers[i] = image_data + i*rowbytes; - - - /* now we can go ahead and just read the whole image */ - - png_read_image(png_ptr, row_pointers); - - - /* and we're done! (png_read_end() can be omitted if no processing of - * post-IDAT text/time/etc. is desired) */ - - free(row_pointers); - row_pointers = NULL; - - png_read_end(png_ptr, NULL); - - return image_data; -} - - -void readpng_cleanup(int free_image_data) -{ - if (free_image_data && image_data) { - free(image_data); - image_data = NULL; - } - - if (png_ptr && info_ptr) { - png_destroy_read_struct(&png_ptr, &info_ptr, NULL); - png_ptr = NULL; - info_ptr = NULL; - } -} diff --git a/contrib/gregbook/readpng.h b/contrib/gregbook/readpng.h deleted file mode 100644 index fad9fe3b4..000000000 --- a/contrib/gregbook/readpng.h +++ /dev/null @@ -1,88 +0,0 @@ -/*--------------------------------------------------------------------------- - - rpng - simple PNG display program readpng.h - - --------------------------------------------------------------------------- - - Copyright (c) 1998-2007 Greg Roelofs. All rights reserved. - - This software is provided "as is," without warranty of any kind, - express or implied. In no event shall the author or contributors - be held liable for any damages arising in any way from the use of - this software. - - The contents of this file are DUAL-LICENSED. You may modify and/or - redistribute this software according to the terms of one of the - following two licenses (at your option): - - - LICENSE 1 ("BSD-like with advertising clause"): - - Permission is granted to anyone to use this software for any purpose, - including commercial applications, and to alter it and redistribute - it freely, subject to the following restrictions: - - 1. Redistributions of source code must retain the above copyright - notice, disclaimer, and this list of conditions. - 2. Redistributions in binary form must reproduce the above copyright - notice, disclaimer, and this list of conditions in the documenta- - tion and/or other materials provided with the distribution. - 3. All advertising materials mentioning features or use of this - software must display the following acknowledgment: - - This product includes software developed by Greg Roelofs - and contributors for the book, "PNG: The Definitive Guide," - published by O'Reilly and Associates. - - - LICENSE 2 (GNU GPL v2 or later): - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software Foundation, - Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - - ---------------------------------------------------------------------------*/ - -#ifndef TRUE -# define TRUE 1 -# define FALSE 0 -#endif - -#ifndef MAX -# define MAX(a,b) ((a) > (b)? (a) : (b)) -# define MIN(a,b) ((a) < (b)? (a) : (b)) -#endif - -#ifdef DEBUG -# define Trace(x) {fprintf x ; fflush(stderr); fflush(stdout);} -#else -# define Trace(x) ; -#endif - -typedef unsigned char uch; -typedef unsigned short ush; -typedef unsigned long ulg; - - -/* prototypes for public functions in readpng.c */ - -void readpng_version_info(void); - -int readpng_init(FILE *infile, ulg *pWidth, ulg *pHeight); - -int readpng_get_bgcolor(uch *bg_red, uch *bg_green, uch *bg_blue); - -uch *readpng_get_image(double display_exponent, int *pChannels, - ulg *pRowbytes); - -void readpng_cleanup(int free_image_data); diff --git a/contrib/gregbook/readpng2.c b/contrib/gregbook/readpng2.c deleted file mode 100644 index 610b3cd87..000000000 --- a/contrib/gregbook/readpng2.c +++ /dev/null @@ -1,521 +0,0 @@ -/*--------------------------------------------------------------------------- - - rpng2 - progressive-model PNG display program readpng2.c - - --------------------------------------------------------------------------- - - Copyright (c) 1998-2015 Greg Roelofs. All rights reserved. - - This software is provided "as is," without warranty of any kind, - express or implied. In no event shall the author or contributors - be held liable for any damages arising in any way from the use of - this software. - - The contents of this file are DUAL-LICENSED. You may modify and/or - redistribute this software according to the terms of one of the - following two licenses (at your option): - - - LICENSE 1 ("BSD-like with advertising clause"): - - Permission is granted to anyone to use this software for any purpose, - including commercial applications, and to alter it and redistribute - it freely, subject to the following restrictions: - - 1. Redistributions of source code must retain the above copyright - notice, disclaimer, and this list of conditions. - 2. Redistributions in binary form must reproduce the above copyright - notice, disclaimer, and this list of conditions in the documenta- - tion and/or other materials provided with the distribution. - 3. All advertising materials mentioning features or use of this - software must display the following acknowledgment: - - This product includes software developed by Greg Roelofs - and contributors for the book, "PNG: The Definitive Guide," - published by O'Reilly and Associates. - - - LICENSE 2 (GNU GPL v2 or later): - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software Foundation, - Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - - --------------------------------------------------------------------------- - - Changelog: - 2015-11-12 - Check return value of png_get_bKGD() (Glenn R-P) - 2017-04-22 - Guard against integer overflow (Glenn R-P) - - ---------------------------------------------------------------------------*/ - - -#include /* for exit() prototype */ -#include - -#include -#include "png.h" /* libpng header from the local directory */ -#include "readpng2.h" /* typedefs, common macros, public prototypes */ - - -/* local prototypes */ - -static void readpng2_info_callback(png_structp png_ptr, png_infop info_ptr); -static void readpng2_row_callback(png_structp png_ptr, png_bytep new_row, - png_uint_32 row_num, int pass); -static void readpng2_end_callback(png_structp png_ptr, png_infop info_ptr); -static void readpng2_error_handler(png_structp png_ptr, png_const_charp msg); -static void readpng2_warning_handler(png_structp png_ptr, png_const_charp msg); - - - - -void readpng2_version_info(void) -{ - fprintf(stderr, " Compiled with libpng %s; using libpng %s\n", - PNG_LIBPNG_VER_STRING, png_libpng_ver); - - fprintf(stderr, " and with zlib %s; using zlib %s.\n", - ZLIB_VERSION, zlib_version); -} - - - - -int readpng2_check_sig(uch *sig, int num) -{ - return !png_sig_cmp(sig, 0, num); -} - - - - -/* returns 0 for success, 2 for libpng problem, 4 for out of memory */ - -int readpng2_init(mainprog_info *mainprog_ptr) -{ - png_structp png_ptr; /* note: temporary variables! */ - png_infop info_ptr; - - - /* could also replace libpng warning-handler (final NULL), but no need: */ - - png_ptr = png_create_read_struct(png_get_libpng_ver(NULL), mainprog_ptr, - readpng2_error_handler, readpng2_warning_handler); - if (!png_ptr) - return 4; /* out of memory */ - - info_ptr = png_create_info_struct(png_ptr); - if (!info_ptr) { - png_destroy_read_struct(&png_ptr, NULL, NULL); - return 4; /* out of memory */ - } - - - /* we could create a second info struct here (end_info), but it's only - * useful if we want to keep pre- and post-IDAT chunk info separated - * (mainly for PNG-aware image editors and converters) */ - - - /* setjmp() must be called in every function that calls a PNG-reading - * libpng function, unless an alternate error handler was installed-- - * but compatible error handlers must either use longjmp() themselves - * (as in this program) or exit immediately, so here we are: */ - - if (setjmp(mainprog_ptr->jmpbuf)) { - png_destroy_read_struct(&png_ptr, &info_ptr, NULL); - return 2; - } - - -#ifdef PNG_HANDLE_AS_UNKNOWN_SUPPORTED - /* prepare the reader to ignore all recognized chunks whose data won't be - * used, i.e., all chunks recognized by libpng except for IHDR, PLTE, IDAT, - * IEND, tRNS, bKGD, gAMA, and sRGB (small performance improvement) */ - { - /* These byte strings were copied from png.h. If a future version - * of readpng2.c recognizes more chunks, add them to this list. - */ - static const png_byte chunks_to_process[] = { - 98, 75, 71, 68, '\0', /* bKGD */ - 103, 65, 77, 65, '\0', /* gAMA */ - 115, 82, 71, 66, '\0', /* sRGB */ - }; - - /* Ignore all chunks except for IHDR, PLTE, tRNS, IDAT, and IEND */ - png_set_keep_unknown_chunks(png_ptr, -1 /* PNG_HANDLE_CHUNK_NEVER */, - NULL, -1); - - /* But do not ignore chunks in the "chunks_to_process" list */ - png_set_keep_unknown_chunks(png_ptr, - 0 /* PNG_HANDLE_CHUNK_AS_DEFAULT */, chunks_to_process, - sizeof(chunks_to_process)/5); - } -#endif /* PNG_HANDLE_AS_UNKNOWN_SUPPORTED */ - - - /* instead of doing png_init_io() here, now we set up our callback - * functions for progressive decoding */ - - png_set_progressive_read_fn(png_ptr, mainprog_ptr, - readpng2_info_callback, readpng2_row_callback, readpng2_end_callback); - - - /* make sure we save our pointers for use in readpng2_decode_data() */ - - mainprog_ptr->png_ptr = png_ptr; - mainprog_ptr->info_ptr = info_ptr; - - - /* and that's all there is to initialization */ - - return 0; -} - - - - -/* returns 0 for success, 2 for libpng (longjmp) problem */ - -int readpng2_decode_data(mainprog_info *mainprog_ptr, uch *rawbuf, ulg length) -{ - png_structp png_ptr = (png_structp)mainprog_ptr->png_ptr; - png_infop info_ptr = (png_infop)mainprog_ptr->info_ptr; - - - /* setjmp() must be called in every function that calls a PNG-reading - * libpng function */ - - if (setjmp(mainprog_ptr->jmpbuf)) { - png_destroy_read_struct(&png_ptr, &info_ptr, NULL); - mainprog_ptr->png_ptr = NULL; - mainprog_ptr->info_ptr = NULL; - return 2; - } - - - /* hand off the next chunk of input data to libpng for decoding */ - - png_process_data(png_ptr, info_ptr, rawbuf, length); - - return 0; -} - - - - -static void readpng2_info_callback(png_structp png_ptr, png_infop info_ptr) -{ - mainprog_info *mainprog_ptr; - int color_type, bit_depth; - png_uint_32 width, height; -#ifdef PNG_FLOATING_POINT_SUPPORTED - double gamma; -#else - png_fixed_point gamma; -#endif - - - /* setjmp() doesn't make sense here, because we'd either have to exit(), - * longjmp() ourselves, or return control to libpng, which doesn't want - * to see us again. By not doing anything here, libpng will instead jump - * to readpng2_decode_data(), which can return an error value to the main - * program. */ - - - /* retrieve the pointer to our special-purpose struct, using the png_ptr - * that libpng passed back to us (i.e., not a global this time--there's - * no real difference for a single image, but for a multithreaded browser - * decoding several PNG images at the same time, one needs to avoid mixing - * up different images' structs) */ - - mainprog_ptr = png_get_progressive_ptr(png_ptr); - - if (mainprog_ptr == NULL) { /* we be hosed */ - fprintf(stderr, - "readpng2 error: main struct not recoverable in info_callback.\n"); - fflush(stderr); - return; - /* - * Alternatively, we could call our error-handler just like libpng - * does, which would effectively terminate the program. Since this - * can only happen if png_ptr gets redirected somewhere odd or the - * main PNG struct gets wiped, we're probably toast anyway. (If - * png_ptr itself is NULL, we would not have been called.) - */ - } - - - /* this is just like in the non-progressive case */ - - png_get_IHDR(png_ptr, info_ptr, &width, &height, &bit_depth, &color_type, - NULL, NULL, NULL); - mainprog_ptr->width = (ulg)width; - mainprog_ptr->height = (ulg)height; - - - /* since we know we've read all of the PNG file's "header" (i.e., up - * to IDAT), we can check for a background color here */ - - if (mainprog_ptr->need_bgcolor) - { - png_color_16p pBackground; - - /* it is not obvious from the libpng documentation, but this function - * takes a pointer to a pointer, and it always returns valid red, - * green and blue values, regardless of color_type: */ - if (png_get_bKGD(png_ptr, info_ptr, &pBackground)) - { - - /* however, it always returns the raw bKGD data, regardless of any - * bit-depth transformations, so check depth and adjust if necessary - */ - if (bit_depth == 16) { - mainprog_ptr->bg_red = pBackground->red >> 8; - mainprog_ptr->bg_green = pBackground->green >> 8; - mainprog_ptr->bg_blue = pBackground->blue >> 8; - } else if (color_type == PNG_COLOR_TYPE_GRAY && bit_depth < 8) { - if (bit_depth == 1) - mainprog_ptr->bg_red = mainprog_ptr->bg_green = - mainprog_ptr->bg_blue = pBackground->gray? 255 : 0; - else if (bit_depth == 2) - mainprog_ptr->bg_red = mainprog_ptr->bg_green = - mainprog_ptr->bg_blue = (255/3) * pBackground->gray; - else /* bit_depth == 4 */ - mainprog_ptr->bg_red = mainprog_ptr->bg_green = - mainprog_ptr->bg_blue = (255/15) * pBackground->gray; - } else { - mainprog_ptr->bg_red = (uch)pBackground->red; - mainprog_ptr->bg_green = (uch)pBackground->green; - mainprog_ptr->bg_blue = (uch)pBackground->blue; - } - } - } - - - /* as before, let libpng expand palette images to RGB, low-bit-depth - * grayscale images to 8 bits, transparency chunks to full alpha channel; - * strip 16-bit-per-sample images to 8 bits per sample; and convert - * grayscale to RGB[A] */ - - if (color_type == PNG_COLOR_TYPE_PALETTE) - png_set_expand(png_ptr); - if (color_type == PNG_COLOR_TYPE_GRAY && bit_depth < 8) - png_set_expand(png_ptr); - if (png_get_valid(png_ptr, info_ptr, PNG_INFO_tRNS)) - png_set_expand(png_ptr); -#ifdef PNG_READ_16_TO_8_SUPPORTED - if (bit_depth == 16) -# ifdef PNG_READ_SCALE_16_TO_8_SUPPORTED - png_set_scale_16(png_ptr); -# else - png_set_strip_16(png_ptr); -# endif -#endif - if (color_type == PNG_COLOR_TYPE_GRAY || - color_type == PNG_COLOR_TYPE_GRAY_ALPHA) - png_set_gray_to_rgb(png_ptr); - - - /* Unlike the basic viewer, which was designed to operate on local files, - * this program is intended to simulate a web browser--even though we - * actually read from a local file, too. But because we are pretending - * that most of the images originate on the Internet, we follow the recom- - * mendation of the sRGB proposal and treat unlabelled images (no gAMA - * chunk) as existing in the sRGB color space. That is, we assume that - * such images have a file gamma of 0.45455, which corresponds to a PC-like - * display system. This change in assumptions will have no effect on a - * PC-like system, but on a Mac, SGI, NeXT or other system with a non- - * identity lookup table, it will darken unlabelled images, which effec- - * tively favors images from PC-like systems over those originating on - * the local platform. Note that mainprog_ptr->display_exponent is the - * "gamma" value for the entire display system, i.e., the product of - * LUT_exponent and CRT_exponent. */ - -#ifdef PNG_FLOATING_POINT_SUPPORTED - if (png_get_gAMA(png_ptr, info_ptr, &gamma)) - png_set_gamma(png_ptr, mainprog_ptr->display_exponent, gamma); - else - png_set_gamma(png_ptr, mainprog_ptr->display_exponent, 0.45455); -#else - if (png_get_gAMA_fixed(png_ptr, info_ptr, &gamma)) - png_set_gamma_fixed(png_ptr, - (png_fixed_point)(100000*mainprog_ptr->display_exponent+.5), gamma); - else - png_set_gamma_fixed(png_ptr, - (png_fixed_point)(100000*mainprog_ptr->display_exponent+.5), 45455); -#endif - - /* we'll let libpng expand interlaced images, too */ - - mainprog_ptr->passes = png_set_interlace_handling(png_ptr); - - - /* all transformations have been registered; now update info_ptr data and - * then get rowbytes and channels */ - - png_read_update_info(png_ptr, info_ptr); - - mainprog_ptr->rowbytes = (int)png_get_rowbytes(png_ptr, info_ptr); - mainprog_ptr->channels = png_get_channels(png_ptr, info_ptr); - - - /* Call the main program to allocate memory for the image buffer and - * initialize windows and whatnot. (The old-style function-pointer - * invocation is used for compatibility with a few supposedly ANSI - * compilers that nevertheless barf on "fn_ptr()"-style syntax.) */ - - (*mainprog_ptr->mainprog_init)(); - - - /* and that takes care of initialization */ - - return; -} - - - - - -static void readpng2_row_callback(png_structp png_ptr, png_bytep new_row, - png_uint_32 row_num, int pass) -{ - mainprog_info *mainprog_ptr; - - - /* first check whether the row differs from the previous pass; if not, - * nothing to combine or display */ - - if (!new_row) - return; - - - /* retrieve the pointer to our special-purpose struct so we can access - * the old rows and image-display callback function */ - - mainprog_ptr = png_get_progressive_ptr(png_ptr); - - - /* save the pass number for optional use by the front end */ - - mainprog_ptr->pass = pass; - - - /* have libpng either combine the new row data with the existing row data - * from previous passes (if interlaced) or else just copy the new row - * into the main program's image buffer */ - - png_progressive_combine_row(png_ptr, mainprog_ptr->row_pointers[row_num], - new_row); - - - /* finally, call the display routine in the main program with the number - * of the row we just updated */ - - (*mainprog_ptr->mainprog_display_row)(row_num); - - - /* and we're ready for more */ - - return; -} - - - - - -static void readpng2_end_callback(png_structp png_ptr, png_infop info_ptr) -{ - mainprog_info *mainprog_ptr; - - - /* retrieve the pointer to our special-purpose struct */ - - mainprog_ptr = png_get_progressive_ptr(png_ptr); - - - /* let the main program know that it should flush any buffered image - * data to the display now and set a "done" flag or whatever, but note - * that it SHOULD NOT DESTROY THE PNG STRUCTS YET--in other words, do - * NOT call readpng2_cleanup() either here or in the finish_display() - * routine; wait until control returns to the main program via - * readpng2_decode_data() */ - - (*mainprog_ptr->mainprog_finish_display)(); - - - /* all done */ - - (void)info_ptr; /* Unused */ - - return; -} - - - - - -void readpng2_cleanup(mainprog_info *mainprog_ptr) -{ - png_structp png_ptr = (png_structp)mainprog_ptr->png_ptr; - png_infop info_ptr = (png_infop)mainprog_ptr->info_ptr; - - if (png_ptr && info_ptr) - png_destroy_read_struct(&png_ptr, &info_ptr, NULL); - - mainprog_ptr->png_ptr = NULL; - mainprog_ptr->info_ptr = NULL; -} - - -static void readpng2_warning_handler(png_structp png_ptr, png_const_charp msg) -{ - fprintf(stderr, "readpng2 libpng warning: %s\n", msg); - fflush(stderr); - (void)png_ptr; /* Unused */ -} - - -static void readpng2_error_handler(png_structp png_ptr, png_const_charp msg) -{ - mainprog_info *mainprog_ptr; - - /* This function, aside from the extra step of retrieving the "error - * pointer" (below) and the fact that it exists within the application - * rather than within libpng, is essentially identical to libpng's - * default error handler. The second point is critical: since both - * setjmp() and longjmp() are called from the same code, they are - * guaranteed to have compatible notions of how big a jmp_buf is, - * regardless of whether _BSD_SOURCE or anything else has (or has not) - * been defined. */ - - fprintf(stderr, "readpng2 libpng error: %s\n", msg); - fflush(stderr); - - mainprog_ptr = png_get_error_ptr(png_ptr); - if (mainprog_ptr == NULL) { /* we are completely hosed now */ - fprintf(stderr, - "readpng2 severe error: jmpbuf not recoverable; terminating.\n"); - fflush(stderr); - exit(99); - } - - /* Now we have our data structure we can use the information in it - * to return control to our own higher level code (all the points - * where 'setjmp' is called in this file.) This will work with other - * error handling mechanisms as well - libpng always calls png_error - * when it can proceed no further, thus, so long as the error handler - * is intercepted, application code can do its own error recovery. - */ - longjmp(mainprog_ptr->jmpbuf, 1); -} diff --git a/contrib/gregbook/readpng2.h b/contrib/gregbook/readpng2.h deleted file mode 100644 index 6b3660d7c..000000000 --- a/contrib/gregbook/readpng2.h +++ /dev/null @@ -1,116 +0,0 @@ -/*--------------------------------------------------------------------------- - - rpng2 - progressive-model PNG display program readpng2.h - - --------------------------------------------------------------------------- - - Copyright (c) 1998-2008 Greg Roelofs. All rights reserved. - - This software is provided "as is," without warranty of any kind, - express or implied. In no event shall the author or contributors - be held liable for any damages arising in any way from the use of - this software. - - The contents of this file are DUAL-LICENSED. You may modify and/or - redistribute this software according to the terms of one of the - following two licenses (at your option): - - - LICENSE 1 ("BSD-like with advertising clause"): - - Permission is granted to anyone to use this software for any purpose, - including commercial applications, and to alter it and redistribute - it freely, subject to the following restrictions: - - 1. Redistributions of source code must retain the above copyright - notice, disclaimer, and this list of conditions. - 2. Redistributions in binary form must reproduce the above copyright - notice, disclaimer, and this list of conditions in the documenta- - tion and/or other materials provided with the distribution. - 3. All advertising materials mentioning features or use of this - software must display the following acknowledgment: - - This product includes software developed by Greg Roelofs - and contributors for the book, "PNG: The Definitive Guide," - published by O'Reilly and Associates. - - - LICENSE 2 (GNU GPL v2 or later): - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software Foundation, - Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - - ---------------------------------------------------------------------------*/ - -#ifndef TRUE -# define TRUE 1 -# define FALSE 0 -#endif - -#ifndef MAX -# define MAX(a,b) ((a) > (b)? (a) : (b)) -# define MIN(a,b) ((a) < (b)? (a) : (b)) -#endif - -#ifdef DEBUG -# define Trace(x) {fprintf x ; fflush(stderr); fflush(stdout);} -#else -# define Trace(x) ; -#endif - -enum rpng2_states { - kPreInit = 0, - kWindowInit, - kDone -}; - -typedef unsigned char uch; -typedef unsigned short ush; -typedef unsigned long ulg; - -typedef struct _mainprog_info { - double display_exponent; - ulg width; - ulg height; - void *png_ptr; - void *info_ptr; - void (*mainprog_init)(void); - void (*mainprog_display_row)(ulg row_num); - void (*mainprog_finish_display)(void); - uch *image_data; - uch **row_pointers; - jmp_buf jmpbuf; - int passes; /* not used */ - int pass; - int rowbytes; - int channels; - int need_bgcolor; - int state; - uch bg_red; - uch bg_green; - uch bg_blue; -} mainprog_info; - - -/* prototypes for public functions in readpng2.c */ - -void readpng2_version_info(void); - -int readpng2_check_sig(uch *sig, int num); - -int readpng2_init(mainprog_info *mainprog_ptr); - -int readpng2_decode_data(mainprog_info *mainprog_ptr, uch *rawbuf, ulg length); - -void readpng2_cleanup(mainprog_info *mainprog_ptr); diff --git a/contrib/gregbook/readppm.c b/contrib/gregbook/readppm.c deleted file mode 100644 index 52e702777..000000000 --- a/contrib/gregbook/readppm.c +++ /dev/null @@ -1,188 +0,0 @@ -/*--------------------------------------------------------------------------- - - rpng - simple PNG display program readppm.c - - --------------------------------------------------------------------------- - - This is a special-purpose replacement for readpng.c that allows binary - PPM files to be used in place of PNG images. - - --------------------------------------------------------------------------- - - Copyright (c) 1998-2007,2017 Greg Roelofs. All rights reserved. - - This software is provided "as is," without warranty of any kind, - express or implied. In no event shall the author or contributors - be held liable for any damages arising in any way from the use of - this software. - - The contents of this file are DUAL-LICENSED. You may modify and/or - redistribute this software according to the terms of one of the - following two licenses (at your option): - - - LICENSE 1 ("BSD-like with advertising clause"): - - Permission is granted to anyone to use this software for any purpose, - including commercial applications, and to alter it and redistribute - it freely, subject to the following restrictions: - - 1. Redistributions of source code must retain the above copyright - notice, disclaimer, and this list of conditions. - 2. Redistributions in binary form must reproduce the above copyright - notice, disclaimer, and this list of conditions in the documenta- - tion and/or other materials provided with the distribution. - 3. All advertising materials mentioning features or use of this - software must display the following acknowledgment: - - This product includes software developed by Greg Roelofs - and contributors for the book, "PNG: The Definitive Guide," - published by O'Reilly and Associates. - - - LICENSE 2 (GNU GPL v2 or later): - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software Foundation, - Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - - ---------------------------------------------------------------------------*/ - -#include -#include - -#include "readpng.h" /* typedefs, common macros, public prototypes */ - - -ulg width, height; -int bit_depth, color_type, channels; -uch *image_data = NULL; -FILE *saved_infile; - - -void readpng_version_info() -{ - fprintf(stderr, " Compiled without libpng, zlib or PBMPLUS/NetPBM.\n"); -} - - -/* return value = 0 for success, 1 for bad sig, 2 for bad IHDR, 4 for no mem */ - -int readpng_init(FILE *infile, ulg *pWidth, ulg *pHeight) -{ - static uch ppmline[256]; - int maxval; - - - saved_infile = infile; - - fgets(ppmline, 256, infile); - if (ppmline[0] != 'P' || ppmline[1] != '6') { - fprintf(stderr, "ERROR: not a PPM file\n"); - return 1; - } - /* possible color types: P5 = grayscale (0), P6 = RGB (2), P8 = RGBA (6) */ - if (ppmline[1] == '6') { - color_type = 2; - channels = 3; - } else if (ppmline[1] == '8') { - color_type = 6; - channels = 4; - } else /* if (ppmline[1] == '5') */ { - color_type = 0; - channels = 1; - } - - do { - fgets(ppmline, 256, infile); - } while (ppmline[0] == '#'); - sscanf(ppmline, "%lu %lu", &width, &height); - - do { - fgets(ppmline, 256, infile); - } while (ppmline[0] == '#'); - sscanf(ppmline, "%d", &maxval); - if (maxval != 255) { - fprintf(stderr, "ERROR: maxval = %d\n", maxval); - return 2; - } - bit_depth = 8; - - *pWidth = width; - *pHeight = height; - - return 0; -} - - - - -/* returns 0 if succeeds, 1 if fails due to no bKGD chunk, 2 if libpng error; - * scales values to 8-bit if necessary */ - -int readpng_get_bgcolor(uch *red, uch *green, uch *blue) -{ - return 1; -} - - - - -/* display_exponent == LUT_exponent * CRT_exponent */ - -uch *readpng_get_image(double display_exponent, int *pChannels, ulg *pRowbytes) -{ - ulg rowbytes; - - - /* expand palette images to RGB, low-bit-depth grayscale images to 8 bits, - * transparency chunks to full alpha channel; strip 16-bit-per-sample - * images to 8 bits per sample; and convert grayscale to RGB[A] */ - - /* GRR WARNING: grayscale needs to be expanded and channels reset! */ - - *pRowbytes = rowbytes = channels*width; - *pChannels = channels; - - Trace((stderr, "readpng_get_image: rowbytes = %ld, height = %ld\n", rowbytes, height)); - - /* Guard against integer overflow */ - if (height > ((size_t)(-1))/rowbytes) { - fprintf(stderr, PROGNAME ": image_data buffer would be too large\n", - return NULL; - } - - if ((image_data = (uch *)malloc(rowbytes*height)) == NULL) { - return NULL; - } - - /* now we can go ahead and just read the whole image */ - - if (fread(image_data, 1L, rowbytes*height, saved_infile) < - rowbytes*height) { - free (image_data); - image_data = NULL; - return NULL; - } - - return image_data; -} - - -void readpng_cleanup(int free_image_data) -{ - if (free_image_data && image_data) { - free(image_data); - image_data = NULL; - } -} diff --git a/contrib/gregbook/rpng-win.c b/contrib/gregbook/rpng-win.c deleted file mode 100644 index 1a6f87615..000000000 --- a/contrib/gregbook/rpng-win.c +++ /dev/null @@ -1,735 +0,0 @@ -/*--------------------------------------------------------------------------- - - rpng - simple PNG display program rpng-win.c - - This program decodes and displays PNG images, with gamma correction and - optionally with a user-specified background color (in case the image has - transparency). It is very nearly the most basic PNG viewer possible. - This version is for 32-bit Windows; it may compile under 16-bit Windows - with a little tweaking (or maybe not). - - to do: - - handle quoted command-line args (especially filenames with spaces) - - have minimum window width: oh well - - use %.1023s to simplify truncation of title-bar string? - - --------------------------------------------------------------------------- - - Changelog: - - 1.00: initial public release - - 1.01: modified to allow abbreviated options; fixed long/ulong mis- - match; switched to png_jmpbuf() macro - - 1.02: added extra set of parentheses to png_jmpbuf() macro; fixed - command-line parsing bug - - 1.10: enabled "message window"/console (thanks to David Geldreich) - - 2.00: dual-licensed (added GNU GPL) - - 2.01: fixed improper display of usage screen on PNG error(s) - - 2.02: check for integer overflow (Glenn R-P) - - --------------------------------------------------------------------------- - - Copyright (c) 1998-2008, 2017 Greg Roelofs. All rights reserved. - - This software is provided "as is," without warranty of any kind, - express or implied. In no event shall the author or contributors - be held liable for any damages arising in any way from the use of - this software. - - The contents of this file are DUAL-LICENSED. You may modify and/or - redistribute this software according to the terms of one of the - following two licenses (at your option): - - - LICENSE 1 ("BSD-like with advertising clause"): - - Permission is granted to anyone to use this software for any purpose, - including commercial applications, and to alter it and redistribute - it freely, subject to the following restrictions: - - 1. Redistributions of source code must retain the above copyright - notice, disclaimer, and this list of conditions. - 2. Redistributions in binary form must reproduce the above copyright - notice, disclaimer, and this list of conditions in the documenta- - tion and/or other materials provided with the distribution. - 3. All advertising materials mentioning features or use of this - software must display the following acknowledgment: - - This product includes software developed by Greg Roelofs - and contributors for the book, "PNG: The Definitive Guide," - published by O'Reilly and Associates. - - - LICENSE 2 (GNU GPL v2 or later): - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software Foundation, - Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - - ---------------------------------------------------------------------------*/ - -#define PROGNAME "rpng-win" -#define LONGNAME "Simple PNG Viewer for Windows" -#define VERSION "2.01 of 16 March 2008" - -#include -#include -#include -#include -#include -#ifdef __CYGWIN__ -/* getch replacement. Turns out, we don't really need this, - * but leave it here if we ever enable any of the uses of - * _getch in the main code - */ -#include -#include -#include -int repl_getch( void ) -{ - char ch; - int fd = fileno(stdin); - struct termio old_tty, new_tty; - - ioctl(fd, TCGETA, &old_tty); - new_tty = old_tty; - new_tty.c_lflag &= ~(ICANON | ECHO | ISIG); - ioctl(fd, TCSETA, &new_tty); - fread(&ch, 1, sizeof(ch), stdin); - ioctl(fd, TCSETA, &old_tty); - - return ch; -} -#define _getch repl_getch -#else -#include /* only for _getch() */ -#endif - -/* #define DEBUG : this enables the Trace() macros */ - -#include "readpng.h" /* typedefs, common macros, readpng prototypes */ - - -/* could just include png.h, but this macro is the only thing we need - * (name and typedefs changed to local versions); note that side effects - * only happen with alpha (which could easily be avoided with - * "ush acopy = (alpha);") */ - -#define alpha_composite(composite, fg, alpha, bg) { \ - ush temp = ((ush)(fg)*(ush)(alpha) + \ - (ush)(bg)*(ush)(255 - (ush)(alpha)) + (ush)128); \ - (composite) = (uch)((temp + (temp >> 8)) >> 8); \ -} - - -/* local prototypes */ -static int rpng_win_create_window(HINSTANCE hInst, int showmode); -static int rpng_win_display_image(void); -static void rpng_win_cleanup(void); -LRESULT CALLBACK rpng_win_wndproc(HWND, UINT, WPARAM, LPARAM); - - -static char titlebar[1024]; -static char *progname = PROGNAME; -static char *appname = LONGNAME; -static char *filename; -static FILE *infile; - -static char *bgstr; -static uch bg_red=0, bg_green=0, bg_blue=0; - -static double display_exponent; - -static ulg image_width, image_height, image_rowbytes; -static int image_channels; -static uch *image_data; - -/* Windows-specific variables */ -static ulg wimage_rowbytes; -static uch *dib; -static uch *wimage_data; -static BITMAPINFOHEADER *bmih; - -static HWND global_hwnd; - - - - -int WINAPI WinMain(HINSTANCE hInst, HINSTANCE hPrevInst, PSTR cmd, int showmode) -{ - char *args[1024]; /* arbitrary limit, but should suffice */ - char *p, *q, **argv = args; - int argc = 0; - int rc, alen, flen; - int error = 0; - int have_bg = FALSE; - double LUT_exponent; /* just the lookup table */ - double CRT_exponent = 2.2; /* just the monitor */ - double default_display_exponent; /* whole display system */ - MSG msg; - - - filename = (char *)NULL; - -#ifndef __CYGWIN__ - /* First reenable console output, which normally goes to the bit bucket - * for windowed apps. Closing the console window will terminate the - * app. Thanks to David.Geldreich at realviz.com for supplying the magical - * incantation. */ - - AllocConsole(); - freopen("CONOUT$", "a", stderr); - freopen("CONOUT$", "a", stdout); -#endif - - - /* Next set the default value for our display-system exponent, i.e., - * the product of the CRT exponent and the exponent corresponding to - * the frame-buffer's lookup table (LUT), if any. This is not an - * exhaustive list of LUT values (e.g., OpenStep has a lot of weird - * ones), but it should cover 99% of the current possibilities. And - * yes, these ifdefs are completely wasted in a Windows program... */ - -#if defined(NeXT) - LUT_exponent = 1.0 / 2.2; - /* - if (some_next_function_that_returns_gamma(&next_gamma)) - LUT_exponent = 1.0 / next_gamma; - */ -#elif defined(sgi) - LUT_exponent = 1.0 / 1.7; - /* there doesn't seem to be any documented function to get the - * "gamma" value, so we do it the hard way */ - infile = fopen("/etc/config/system.glGammaVal", "r"); - if (infile) { - double sgi_gamma; - - fgets(tmpline, 80, infile); - fclose(infile); - sgi_gamma = atof(tmpline); - if (sgi_gamma > 0.0) - LUT_exponent = 1.0 / sgi_gamma; - } -#elif defined(Macintosh) - LUT_exponent = 1.8 / 2.61; - /* - if (some_mac_function_that_returns_gamma(&mac_gamma)) - LUT_exponent = mac_gamma / 2.61; - */ -#else - LUT_exponent = 1.0; /* assume no LUT: most PCs */ -#endif - - /* the defaults above give 1.0, 1.3, 1.5 and 2.2, respectively: */ - default_display_exponent = LUT_exponent * CRT_exponent; - - - /* If the user has set the SCREEN_GAMMA environment variable as suggested - * (somewhat imprecisely) in the libpng documentation, use that; otherwise - * use the default value we just calculated. Either way, the user may - * override this via a command-line option. */ - - if ((p = getenv("SCREEN_GAMMA")) != NULL) - display_exponent = atof(p); - else - display_exponent = default_display_exponent; - - - /* Windows really hates command lines, so we have to set up our own argv. - * Note that we do NOT bother with quoted arguments here, so don't use - * filenames with spaces in 'em! */ - - argv[argc++] = PROGNAME; - p = cmd; - for (;;) { - if (*p == ' ') - while (*++p == ' ') - ; - /* now p points at the first non-space after some spaces */ - if (*p == '\0') - break; /* nothing after the spaces: done */ - argv[argc++] = q = p; - while (*q && *q != ' ') - ++q; - /* now q points at a space or the end of the string */ - if (*q == '\0') - break; /* last argv already terminated; quit */ - *q = '\0'; /* change space to terminator */ - p = q + 1; - } - argv[argc] = NULL; /* terminate the argv array itself */ - - - /* Now parse the command line for options and the PNG filename. */ - - while (*++argv && !error) { - if (!strncmp(*argv, "-gamma", 2)) { - if (!*++argv) - ++error; - else { - display_exponent = atof(*argv); - if (display_exponent <= 0.0) - ++error; - } - } else if (!strncmp(*argv, "-bgcolor", 2)) { - if (!*++argv) - ++error; - else { - bgstr = *argv; - if (strlen(bgstr) != 7 || bgstr[0] != '#') - ++error; - else - have_bg = TRUE; - } - } else { - if (**argv != '-') { - filename = *argv; - if (argv[1]) /* shouldn't be any more args after filename */ - ++error; - } else - ++error; /* not expecting any other options */ - } - } - - if (!filename) - ++error; - - - /* print usage screen if any errors up to this point */ - - if (error) { -#ifndef __CYGWIN__ - int ch; -#endif - - fprintf(stderr, "\n%s %s: %s\n\n", PROGNAME, VERSION, appname); - readpng_version_info(); - fprintf(stderr, "\n" - "Usage: %s [-gamma exp] [-bgcolor bg] file.png\n" - " exp \ttransfer-function exponent (``gamma'') of the display\n" - "\t\t system in floating-point format (e.g., ``%.1f''); equal\n" - "\t\t to the product of the lookup-table exponent (varies)\n" - "\t\t and the CRT exponent (usually 2.2); must be positive\n" - " bg \tdesired background color in 7-character hex RGB format\n" - "\t\t (e.g., ``#ff7700'' for orange: same as HTML colors);\n" - "\t\t used with transparent images\n" - "\nPress Q, Esc or mouse button 1 after image is displayed to quit.\n" -#ifndef __CYGWIN__ - "Press Q or Esc to quit this usage screen.\n" -#endif - "\n", PROGNAME, default_display_exponent); -#ifndef __CYGWIN__ - do - ch = _getch(); - while (ch != 'q' && ch != 'Q' && ch != 0x1B); -#endif - exit(1); - } - - - if (!(infile = fopen(filename, "rb"))) { - fprintf(stderr, PROGNAME ": can't open PNG file [%s]\n", filename); - ++error; - } else { - if ((rc = readpng_init(infile, &image_width, &image_height)) != 0) { - switch (rc) { - case 1: - fprintf(stderr, PROGNAME - ": [%s] is not a PNG file: incorrect signature\n", - filename); - break; - case 2: - fprintf(stderr, PROGNAME - ": [%s] has bad IHDR (libpng longjmp)\n", filename); - break; - case 4: - fprintf(stderr, PROGNAME ": insufficient memory\n"); - break; - default: - fprintf(stderr, PROGNAME - ": unknown readpng_init() error\n"); - break; - } - ++error; - } - if (error) - fclose(infile); - } - - - if (error) { -#ifndef __CYGWIN__ - int ch; -#endif - - fprintf(stderr, PROGNAME ": aborting.\n"); -#ifndef __CYGWIN__ - do - ch = _getch(); - while (ch != 'q' && ch != 'Q' && ch != 0x1B); -#endif - exit(2); - } else { - fprintf(stderr, "\n%s %s: %s\n", PROGNAME, VERSION, appname); -#ifndef __CYGWIN__ - fprintf(stderr, - "\n [console window: closing this window will terminate %s]\n\n", - PROGNAME); -#endif - } - - - /* set the title-bar string, but make sure buffer doesn't overflow */ - - alen = strlen(appname); - flen = strlen(filename); - if (alen + flen + 3 > 1023) - sprintf(titlebar, "%s: ...%s", appname, filename+(alen+flen+6-1023)); - else - sprintf(titlebar, "%s: %s", appname, filename); - - - /* if the user didn't specify a background color on the command line, - * check for one in the PNG file--if not, the initialized values of 0 - * (black) will be used */ - - if (have_bg) { - unsigned r, g, b; /* this approach quiets compiler warnings */ - - sscanf(bgstr+1, "%2x%2x%2x", &r, &g, &b); - bg_red = (uch)r; - bg_green = (uch)g; - bg_blue = (uch)b; - } else if (readpng_get_bgcolor(&bg_red, &bg_green, &bg_blue) > 1) { - readpng_cleanup(TRUE); - fprintf(stderr, PROGNAME - ": libpng error while checking for background color\n"); - exit(2); - } - - - /* do the basic Windows initialization stuff, make the window and fill it - * with the background color */ - - if (rpng_win_create_window(hInst, showmode)) - exit(2); - - - /* decode the image, all at once */ - - Trace((stderr, "calling readpng_get_image()\n")) - image_data = readpng_get_image(display_exponent, &image_channels, - &image_rowbytes); - Trace((stderr, "done with readpng_get_image()\n")) - - - /* done with PNG file, so clean up to minimize memory usage (but do NOT - * nuke image_data!) */ - - readpng_cleanup(FALSE); - fclose(infile); - - if (!image_data) { - fprintf(stderr, PROGNAME ": unable to decode PNG image\n"); - exit(3); - } - - - /* display image (composite with background if requested) */ - - Trace((stderr, "calling rpng_win_display_image()\n")) - if (rpng_win_display_image()) { - free(image_data); - exit(4); - } - Trace((stderr, "done with rpng_win_display_image()\n")) - - - /* wait for the user to tell us when to quit */ - - printf( -#ifndef __CYGWIN__ - "Done. Press Q, Esc or mouse button 1 (within image window) to quit.\n" -#else - "Done. Press mouse button 1 (within image window) to quit.\n" -#endif - ); - fflush(stdout); - - while (GetMessage(&msg, NULL, 0, 0)) { - TranslateMessage(&msg); - DispatchMessage(&msg); - } - - - /* OK, we're done: clean up all image and Windows resources and go away */ - - rpng_win_cleanup(); - - return msg.wParam; -} - - - - - -static int rpng_win_create_window(HINSTANCE hInst, int showmode) -{ - uch *dest; - int extra_width, extra_height; - ulg i, j; - WNDCLASSEX wndclass; - - -/*--------------------------------------------------------------------------- - Allocate memory for the display-specific version of the image (round up - to multiple of 4 for Windows DIB). - ---------------------------------------------------------------------------*/ - - wimage_rowbytes = ((3*image_width + 3L) >> 2) << 2; - - /* Guard against integer overflow */ - if (image_height > ((size_t)(-1))/wimage_rowbytes) { - fprintf(stderr, PROGNAME ": image_data buffer would be too large\n"); - return 4; /* fail */ - } - - if (!(dib = (uch *)malloc(sizeof(BITMAPINFOHEADER) + - wimage_rowbytes*image_height))) - { - return 4; /* fail */ - } - -/*--------------------------------------------------------------------------- - Initialize the DIB. Negative height means to use top-down BMP ordering - (must be uncompressed, but that's what we want). Bit count of 1, 4 or 8 - implies a colormap of RGBX quads, but 24-bit BMPs just use B,G,R values - directly => wimage_data begins immediately after BMP header. - ---------------------------------------------------------------------------*/ - - memset(dib, 0, sizeof(BITMAPINFOHEADER)); - bmih = (BITMAPINFOHEADER *)dib; - bmih->biSize = sizeof(BITMAPINFOHEADER); - bmih->biWidth = image_width; - bmih->biHeight = -((long)image_height); - bmih->biPlanes = 1; - bmih->biBitCount = 24; - bmih->biCompression = 0; - wimage_data = dib + sizeof(BITMAPINFOHEADER); - -/*--------------------------------------------------------------------------- - Fill in background color (black by default); data are in BGR order. - ---------------------------------------------------------------------------*/ - - for (j = 0; j < image_height; ++j) { - dest = wimage_data + j*wimage_rowbytes; - for (i = image_width; i > 0; --i) { - *dest++ = bg_blue; - *dest++ = bg_green; - *dest++ = bg_red; - } - } - -/*--------------------------------------------------------------------------- - Set the window parameters. - ---------------------------------------------------------------------------*/ - - memset(&wndclass, 0, sizeof(wndclass)); - - wndclass.cbSize = sizeof(wndclass); - wndclass.style = CS_HREDRAW | CS_VREDRAW; - wndclass.lpfnWndProc = rpng_win_wndproc; - wndclass.hInstance = hInst; - wndclass.hIcon = LoadIcon(NULL, IDI_APPLICATION); - wndclass.hCursor = LoadCursor(NULL, IDC_ARROW); - wndclass.hbrBackground = (HBRUSH)GetStockObject(DKGRAY_BRUSH); - wndclass.lpszMenuName = NULL; - wndclass.lpszClassName = progname; - wndclass.hIconSm = LoadIcon(NULL, IDI_APPLICATION); - - RegisterClassEx(&wndclass); - -/*--------------------------------------------------------------------------- - Finally, create the window. - ---------------------------------------------------------------------------*/ - - extra_width = 2*(GetSystemMetrics(SM_CXBORDER) + - GetSystemMetrics(SM_CXDLGFRAME)); - extra_height = 2*(GetSystemMetrics(SM_CYBORDER) + - GetSystemMetrics(SM_CYDLGFRAME)) + - GetSystemMetrics(SM_CYCAPTION); - - global_hwnd = CreateWindow(progname, titlebar, WS_OVERLAPPEDWINDOW, - CW_USEDEFAULT, CW_USEDEFAULT, image_width+extra_width, - image_height+extra_height, NULL, NULL, hInst, NULL); - - ShowWindow(global_hwnd, showmode); - UpdateWindow(global_hwnd); - - return 0; - -} /* end function rpng_win_create_window() */ - - - - - -static int rpng_win_display_image() -{ - uch *src, *dest; - uch r, g, b, a; - ulg i, row, lastrow; - RECT rect; - - - Trace((stderr, "beginning display loop (image_channels == %d)\n", - image_channels)) - Trace((stderr, "(width = %ld, rowbytes = %ld, wimage_rowbytes = %d)\n", - image_width, image_rowbytes, wimage_rowbytes)) - - -/*--------------------------------------------------------------------------- - Blast image data to buffer. This whole routine takes place before the - message loop begins, so there's no real point in any pseudo-progressive - display... - ---------------------------------------------------------------------------*/ - - for (lastrow = row = 0; row < image_height; ++row) { - src = image_data + row*image_rowbytes; - dest = wimage_data + row*wimage_rowbytes; - if (image_channels == 3) { - for (i = image_width; i > 0; --i) { - r = *src++; - g = *src++; - b = *src++; - *dest++ = b; - *dest++ = g; /* note reverse order */ - *dest++ = r; - } - } else /* if (image_channels == 4) */ { - for (i = image_width; i > 0; --i) { - r = *src++; - g = *src++; - b = *src++; - a = *src++; - if (a == 255) { - *dest++ = b; - *dest++ = g; - *dest++ = r; - } else if (a == 0) { - *dest++ = bg_blue; - *dest++ = bg_green; - *dest++ = bg_red; - } else { - /* this macro (copied from png.h) composites the - * foreground and background values and puts the - * result into the first argument; there are no - * side effects with the first argument */ - alpha_composite(*dest++, b, a, bg_blue); - alpha_composite(*dest++, g, a, bg_green); - alpha_composite(*dest++, r, a, bg_red); - } - } - } - /* display after every 16 lines */ - if (((row+1) & 0xf) == 0) { - rect.left = 0L; - rect.top = (LONG)lastrow; - rect.right = (LONG)image_width; /* possibly off by one? */ - rect.bottom = (LONG)lastrow + 16L; /* possibly off by one? */ - InvalidateRect(global_hwnd, &rect, FALSE); - UpdateWindow(global_hwnd); /* similar to XFlush() */ - lastrow = row + 1; - } - } - - Trace((stderr, "calling final image-flush routine\n")) - if (lastrow < image_height) { - rect.left = 0L; - rect.top = (LONG)lastrow; - rect.right = (LONG)image_width; /* possibly off by one? */ - rect.bottom = (LONG)image_height; /* possibly off by one? */ - InvalidateRect(global_hwnd, &rect, FALSE); - UpdateWindow(global_hwnd); /* similar to XFlush() */ - } - -/* - last param determines whether or not background is wiped before paint - InvalidateRect(global_hwnd, NULL, TRUE); - UpdateWindow(global_hwnd); - */ - - return 0; -} - - - - - -static void rpng_win_cleanup() -{ - if (image_data) { - free(image_data); - image_data = NULL; - } - - if (dib) { - free(dib); - dib = NULL; - } -} - - - - - -LRESULT CALLBACK rpng_win_wndproc(HWND hwnd, UINT iMsg, WPARAM wP, LPARAM lP) -{ - HDC hdc; - PAINTSTRUCT ps; - int rc; - - switch (iMsg) { - case WM_CREATE: - /* one-time processing here, if any */ - return 0; - - case WM_PAINT: - hdc = BeginPaint(hwnd, &ps); - /* dest */ - rc = StretchDIBits(hdc, 0, 0, image_width, image_height, - /* source */ - 0, 0, image_width, image_height, - wimage_data, (BITMAPINFO *)bmih, - /* iUsage: no clue */ - 0, SRCCOPY); - EndPaint(hwnd, &ps); - return 0; - - /* wait for the user to tell us when to quit */ - case WM_CHAR: - switch (wP) { /* only need one, so ignore repeat count */ - case 'q': - case 'Q': - case 0x1B: /* Esc key */ - PostQuitMessage(0); - } - return 0; - - case WM_LBUTTONDOWN: /* another way of quitting */ - case WM_DESTROY: - PostQuitMessage(0); - return 0; - } - - return DefWindowProc(hwnd, iMsg, wP, lP); -} diff --git a/contrib/gregbook/rpng-x.c b/contrib/gregbook/rpng-x.c deleted file mode 100644 index 92effaa6d..000000000 --- a/contrib/gregbook/rpng-x.c +++ /dev/null @@ -1,911 +0,0 @@ -/*--------------------------------------------------------------------------- - - rpng - simple PNG display program rpng-x.c - - This program decodes and displays PNG images, with gamma correction and - optionally with a user-specified background color (in case the image has - transparency). It is very nearly the most basic PNG viewer possible. - This version is for the X Window System (tested by author under Unix and - by Martin Zinser under OpenVMS; may work under OS/2 with some tweaking). - - to do: - - 8-bit (colormapped) X support - - use %.1023s to simplify truncation of title-bar string? - - --------------------------------------------------------------------------- - - Changelog: - - 1.01: initial public release - - 1.02: modified to allow abbreviated options; fixed long/ulong mis- - match; switched to png_jmpbuf() macro - - 1.10: added support for non-default visuals; fixed X pixel-conversion - - 1.11: added extra set of parentheses to png_jmpbuf() macro; fixed - command-line parsing bug - - 1.12: fixed some small X memory leaks (thanks to François Petitjean) - - 1.13: fixed XFreeGC() crash bug (thanks to Patrick Welche) - - 1.14: added support for X resources (thanks to Gerhard Niklasch) - - 2.00: dual-licensed (added GNU GPL) - - 2.01: fixed improper display of usage screen on PNG error(s) - - 2.02: Added "void(argc);" statement to quiet pedantic compiler warnings - about unused variable (GR-P) - - 2.03: check for integer overflow (Glenn R-P) - - --------------------------------------------------------------------------- - - Copyright (c) 1998-2008, 2017 Greg Roelofs. All rights reserved. - - This software is provided "as is," without warranty of any kind, - express or implied. In no event shall the author or contributors - be held liable for any damages arising in any way from the use of - this software. - - The contents of this file are DUAL-LICENSED. You may modify and/or - redistribute this software according to the terms of one of the - following two licenses (at your option): - - - LICENSE 1 ("BSD-like with advertising clause"): - - Permission is granted to anyone to use this software for any purpose, - including commercial applications, and to alter it and redistribute - it freely, subject to the following restrictions: - - 1. Redistributions of source code must retain the above copyright - notice, disclaimer, and this list of conditions. - 2. Redistributions in binary form must reproduce the above copyright - notice, disclaimer, and this list of conditions in the documenta- - tion and/or other materials provided with the distribution. - 3. All advertising materials mentioning features or use of this - software must display the following acknowledgment: - - This product includes software developed by Greg Roelofs - and contributors for the book, "PNG: The Definitive Guide," - published by O'Reilly and Associates. - - - LICENSE 2 (GNU GPL v2 or later): - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software Foundation, - Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - - ---------------------------------------------------------------------------*/ - -#define PROGNAME "rpng-x" -#define LONGNAME "Simple PNG Viewer for X" -#define VERSION "2.02 of 15 June 2014" -#define RESNAME "rpng" /* our X resource application name */ -#define RESCLASS "Rpng" /* our X resource class name */ - -#include -#include -#include -#include -#include -#include -#include -#include - -/* #define DEBUG : this enables the Trace() macros */ - -#include "readpng.h" /* typedefs, common macros, readpng prototypes */ - - -/* could just include png.h, but this macro is the only thing we need - * (name and typedefs changed to local versions); note that side effects - * only happen with alpha (which could easily be avoided with - * "ush acopy = (alpha);") */ - -#define alpha_composite(composite, fg, alpha, bg) { \ - ush temp = ((ush)(fg)*(ush)(alpha) + \ - (ush)(bg)*(ush)(255 - (ush)(alpha)) + (ush)128); \ - (composite) = (uch)((temp + (temp >> 8)) >> 8); \ -} - - -/* local prototypes */ -static int rpng_x_create_window(void); -static int rpng_x_display_image(void); -static void rpng_x_cleanup(void); -static int rpng_x_msb(ulg u32val); - - -static char titlebar[1024], *window_name = titlebar; -static char *appname = LONGNAME; -static char *icon_name = PROGNAME; -static char *res_name = RESNAME; -static char *res_class = RESCLASS; -static char *filename; -static FILE *infile; - -static char *bgstr; -static uch bg_red=0, bg_green=0, bg_blue=0; - -static double display_exponent; - -static ulg image_width, image_height, image_rowbytes; -static int image_channels; -static uch *image_data; - -/* X-specific variables */ -static char *displayname; -static XImage *ximage; -static Display *display; -static int depth; -static Visual *visual; -static XVisualInfo *visual_list; -static int RShift, GShift, BShift; -static ulg RMask, GMask, BMask; -static Window window; -static GC gc; -static Colormap colormap; - -static int have_nondefault_visual = FALSE; -static int have_colormap = FALSE; -static int have_window = FALSE; -static int have_gc = FALSE; -/* -ulg numcolors=0, pixels[256]; -ush reds[256], greens[256], blues[256]; - */ - - - - -int main(int argc, char **argv) -{ -#ifdef sgi - char tmpline[80]; -#endif - char *p; - int rc, alen, flen; - int error = 0; - int have_bg = FALSE; - double LUT_exponent; /* just the lookup table */ - double CRT_exponent = 2.2; /* just the monitor */ - double default_display_exponent; /* whole display system */ - XEvent e; - KeySym k; - - - displayname = (char *)NULL; - filename = (char *)NULL; - - - /* First set the default value for our display-system exponent, i.e., - * the product of the CRT exponent and the exponent corresponding to - * the frame-buffer's lookup table (LUT), if any. This is not an - * exhaustive list of LUT values (e.g., OpenStep has a lot of weird - * ones), but it should cover 99% of the current possibilities. */ - -#if defined(NeXT) - LUT_exponent = 1.0 / 2.2; - /* - if (some_next_function_that_returns_gamma(&next_gamma)) - LUT_exponent = 1.0 / next_gamma; - */ -#elif defined(sgi) - LUT_exponent = 1.0 / 1.7; - /* there doesn't seem to be any documented function to get the - * "gamma" value, so we do it the hard way */ - infile = fopen("/etc/config/system.glGammaVal", "r"); - if (infile) { - double sgi_gamma; - - fgets(tmpline, 80, infile); - fclose(infile); - sgi_gamma = atof(tmpline); - if (sgi_gamma > 0.0) - LUT_exponent = 1.0 / sgi_gamma; - } -#elif defined(Macintosh) - LUT_exponent = 1.8 / 2.61; - /* - if (some_mac_function_that_returns_gamma(&mac_gamma)) - LUT_exponent = mac_gamma / 2.61; - */ -#else - LUT_exponent = 1.0; /* assume no LUT: most PCs */ -#endif - - /* the defaults above give 1.0, 1.3, 1.5 and 2.2, respectively: */ - default_display_exponent = LUT_exponent * CRT_exponent; - - - /* If the user has set the SCREEN_GAMMA environment variable as suggested - * (somewhat imprecisely) in the libpng documentation, use that; otherwise - * use the default value we just calculated. Either way, the user may - * override this via a command-line option. */ - - if ((p = getenv("SCREEN_GAMMA")) != NULL) - display_exponent = atof(p); - else - display_exponent = default_display_exponent; - - - /* Now parse the command line for options and the PNG filename. */ - - while (*++argv && !error) { - if (!strncmp(*argv, "-display", 2)) { - if (!*++argv) - ++error; - else - displayname = *argv; - } else if (!strncmp(*argv, "-gamma", 2)) { - if (!*++argv) - ++error; - else { - display_exponent = atof(*argv); - if (display_exponent <= 0.0) - ++error; - } - } else if (!strncmp(*argv, "-bgcolor", 2)) { - if (!*++argv) - ++error; - else { - bgstr = *argv; - if (strlen(bgstr) != 7 || bgstr[0] != '#') - ++error; - else - have_bg = TRUE; - } - } else { - if (**argv != '-') { - filename = *argv; - if (argv[1]) /* shouldn't be any more args after filename */ - ++error; - } else - ++error; /* not expecting any other options */ - } - } - - if (!filename) - ++error; - - - /* print usage screen if any errors up to this point */ - - if (error) { - fprintf(stderr, "\n%s %s: %s\n", PROGNAME, VERSION, appname); - readpng_version_info(); - fprintf(stderr, "\n" - "Usage: %s [-display xdpy] [-gamma exp] [-bgcolor bg] file.png\n" - " xdpy\tname of the target X display (e.g., ``hostname:0'')\n" - " exp \ttransfer-function exponent (``gamma'') of the display\n" - "\t\t system in floating-point format (e.g., ``%.1f''); equal\n", - PROGNAME, default_display_exponent); - - fprintf(stderr, "\n" - "\t\t to the product of the lookup-table exponent (varies)\n" - "\t\t and the CRT exponent (usually 2.2); must be positive\n" - " bg \tdesired background color in 7-character hex RGB format\n" - "\t\t (e.g., ``#ff7700'' for orange: same as HTML colors);\n" - "\t\t used with transparent images\n" - "\nPress Q, Esc or mouse button 1 (within image window, after image\n" - "is displayed) to quit.\n"); - exit(1); - } - - - if (!(infile = fopen(filename, "rb"))) { - fprintf(stderr, PROGNAME ": can't open PNG file [%s]\n", filename); - ++error; - } else { - if ((rc = readpng_init(infile, &image_width, &image_height)) != 0) { - switch (rc) { - case 1: - fprintf(stderr, PROGNAME - ": [%s] is not a PNG file: incorrect signature\n", - filename); - break; - case 2: - fprintf(stderr, PROGNAME - ": [%s] has bad IHDR (libpng longjmp)\n", filename); - break; - case 4: - fprintf(stderr, PROGNAME ": insufficient memory\n"); - break; - default: - fprintf(stderr, PROGNAME - ": unknown readpng_init() error\n"); - break; - } - ++error; - } else { - display = XOpenDisplay(displayname); - if (!display) { - readpng_cleanup(TRUE); - fprintf(stderr, PROGNAME ": can't open X display [%s]\n", - displayname? displayname : "default"); - ++error; - } - } - if (error) - fclose(infile); - } - - - if (error) { - fprintf(stderr, PROGNAME ": aborting.\n"); - exit(2); - } - - - /* set the title-bar string, but make sure buffer doesn't overflow */ - - alen = strlen(appname); - flen = strlen(filename); - if (alen + flen + 3 > 1023) - sprintf(titlebar, "%s: ...%s", appname, filename+(alen+flen+6-1023)); - else - sprintf(titlebar, "%s: %s", appname, filename); - - - /* if the user didn't specify a background color on the command line, - * check for one in the PNG file--if not, the initialized values of 0 - * (black) will be used */ - - if (have_bg) { - unsigned r, g, b; /* this approach quiets compiler warnings */ - - sscanf(bgstr+1, "%2x%2x%2x", &r, &g, &b); - bg_red = (uch)r; - bg_green = (uch)g; - bg_blue = (uch)b; - } else if (readpng_get_bgcolor(&bg_red, &bg_green, &bg_blue) > 1) { - readpng_cleanup(TRUE); - fprintf(stderr, PROGNAME - ": libpng error while checking for background color\n"); - exit(2); - } - - - /* do the basic X initialization stuff, make the window and fill it - * with the background color */ - - if (rpng_x_create_window()) - exit(2); - - - /* decode the image, all at once */ - - Trace((stderr, "calling readpng_get_image()\n")) - image_data = readpng_get_image(display_exponent, &image_channels, - &image_rowbytes); - Trace((stderr, "done with readpng_get_image()\n")) - - - /* done with PNG file, so clean up to minimize memory usage (but do NOT - * nuke image_data!) */ - - readpng_cleanup(FALSE); - fclose(infile); - - if (!image_data) { - fprintf(stderr, PROGNAME ": unable to decode PNG image\n"); - exit(3); - } - - - /* display image (composite with background if requested) */ - - Trace((stderr, "calling rpng_x_display_image()\n")) - if (rpng_x_display_image()) { - free(image_data); - exit(4); - } - Trace((stderr, "done with rpng_x_display_image()\n")) - - - /* wait for the user to tell us when to quit */ - - printf( - "Done. Press Q, Esc or mouse button 1 (within image window) to quit.\n"); - fflush(stdout); - - do - XNextEvent(display, &e); - while (!(e.type == ButtonPress && e.xbutton.button == Button1) && - !(e.type == KeyPress && /* v--- or 1 for shifted keys */ - ((k = XLookupKeysym(&e.xkey, 0)) == XK_q || k == XK_Escape) )); - - - /* OK, we're done: clean up all image and X resources and go away */ - - rpng_x_cleanup(); - - (void)argc; /* Unused */ - - return 0; -} - - - - - -static int rpng_x_create_window(void) -{ - uch *xdata; - int need_colormap = FALSE; - int screen, pad; - ulg bg_pixel = 0L; - ulg attrmask; - Window root; - XEvent e; - XGCValues gcvalues; - XSetWindowAttributes attr; - XTextProperty windowName, *pWindowName = &windowName; - XTextProperty iconName, *pIconName = &iconName; - XVisualInfo visual_info; - XSizeHints *size_hints; - XWMHints *wm_hints; - XClassHint *class_hints; - - - screen = DefaultScreen(display); - depth = DisplayPlanes(display, screen); - root = RootWindow(display, screen); - -#ifdef DEBUG - XSynchronize(display, True); -#endif - -#if 0 -/* GRR: add 8-bit support */ - if (/* depth != 8 && */ depth != 16 && depth != 24 && depth != 32) { - fprintf(stderr, - "screen depth %d not supported (only 16-, 24- or 32-bit TrueColor)\n", - depth); - return 2; - } - - XMatchVisualInfo(display, screen, depth, - (depth == 8)? PseudoColor : TrueColor, &visual_info); - visual = visual_info.visual; -#else - if (depth != 16 && depth != 24 && depth != 32) { - int visuals_matched = 0; - - Trace((stderr, "default depth is %d: checking other visuals\n", - depth)) - - /* 24-bit first */ - visual_info.screen = screen; - visual_info.depth = 24; - visual_list = XGetVisualInfo(display, - VisualScreenMask | VisualDepthMask, &visual_info, &visuals_matched); - if (visuals_matched == 0) { -/* GRR: add 15-, 16- and 32-bit TrueColor visuals (also DirectColor?) */ - fprintf(stderr, "default screen depth %d not supported, and no" - " 24-bit visuals found\n", depth); - return 2; - } - Trace((stderr, "XGetVisualInfo() returned %d 24-bit visuals\n", - visuals_matched)) - visual = visual_list[0].visual; - depth = visual_list[0].depth; -/* - colormap_size = visual_list[0].colormap_size; - visual_class = visual->class; - visualID = XVisualIDFromVisual(visual); - */ - have_nondefault_visual = TRUE; - need_colormap = TRUE; - } else { - XMatchVisualInfo(display, screen, depth, TrueColor, &visual_info); - visual = visual_info.visual; - } -#endif - - RMask = visual->red_mask; - GMask = visual->green_mask; - BMask = visual->blue_mask; - -/* GRR: add/check 8-bit support */ - if (depth == 8 || need_colormap) { - colormap = XCreateColormap(display, root, visual, AllocNone); - if (!colormap) { - fprintf(stderr, "XCreateColormap() failed\n"); - return 2; - } - have_colormap = TRUE; - } - if (depth == 15 || depth == 16) { - RShift = 15 - rpng_x_msb(RMask); /* these are right-shifts */ - GShift = 15 - rpng_x_msb(GMask); - BShift = 15 - rpng_x_msb(BMask); - } else if (depth > 16) { -#define NO_24BIT_MASKS -#ifdef NO_24BIT_MASKS - RShift = rpng_x_msb(RMask) - 7; /* these are left-shifts */ - GShift = rpng_x_msb(GMask) - 7; - BShift = rpng_x_msb(BMask) - 7; -#else - RShift = 7 - rpng_x_msb(RMask); /* these are right-shifts, too */ - GShift = 7 - rpng_x_msb(GMask); - BShift = 7 - rpng_x_msb(BMask); -#endif - } - if (depth >= 15 && (RShift < 0 || GShift < 0 || BShift < 0)) { - fprintf(stderr, "rpng internal logic error: negative X shift(s)!\n"); - return 2; - } - -/*--------------------------------------------------------------------------- - Finally, create the window. - ---------------------------------------------------------------------------*/ - - attr.backing_store = Always; - attr.event_mask = ExposureMask | KeyPressMask | ButtonPressMask; - attrmask = CWBackingStore | CWEventMask; - if (have_nondefault_visual) { - attr.colormap = colormap; - attr.background_pixel = 0; - attr.border_pixel = 1; - attrmask |= CWColormap | CWBackPixel | CWBorderPixel; - } - - window = XCreateWindow(display, root, 0, 0, image_width, image_height, 0, - depth, InputOutput, visual, attrmask, &attr); - - if (window == None) { - fprintf(stderr, "XCreateWindow() failed\n"); - return 2; - } else - have_window = TRUE; - - if (depth == 8) - XSetWindowColormap(display, window, colormap); - - if (!XStringListToTextProperty(&window_name, 1, pWindowName)) - pWindowName = NULL; - if (!XStringListToTextProperty(&icon_name, 1, pIconName)) - pIconName = NULL; - - /* OK if any hints allocation fails; XSetWMProperties() allows NULLs */ - - if ((size_hints = XAllocSizeHints()) != NULL) { - /* window will not be resizable */ - size_hints->flags = PMinSize | PMaxSize; - size_hints->min_width = size_hints->max_width = (int)image_width; - size_hints->min_height = size_hints->max_height = (int)image_height; - } - - if ((wm_hints = XAllocWMHints()) != NULL) { - wm_hints->initial_state = NormalState; - wm_hints->input = True; - /* wm_hints->icon_pixmap = icon_pixmap; */ - wm_hints->flags = StateHint | InputHint /* | IconPixmapHint */ ; - } - - if ((class_hints = XAllocClassHint()) != NULL) { - class_hints->res_name = res_name; - class_hints->res_class = res_class; - } - - XSetWMProperties(display, window, pWindowName, pIconName, NULL, 0, - size_hints, wm_hints, class_hints); - - /* various properties and hints no longer needed; free memory */ - if (pWindowName) - XFree(pWindowName->value); - if (pIconName) - XFree(pIconName->value); - if (size_hints) - XFree(size_hints); - if (wm_hints) - XFree(wm_hints); - if (class_hints) - XFree(class_hints); - - XMapWindow(display, window); - - gc = XCreateGC(display, window, 0, &gcvalues); - have_gc = TRUE; - -/*--------------------------------------------------------------------------- - Fill window with the specified background color. - ---------------------------------------------------------------------------*/ - - if (depth == 24 || depth == 32) { - bg_pixel = ((ulg)bg_red << RShift) | - ((ulg)bg_green << GShift) | - ((ulg)bg_blue << BShift); - } else if (depth == 16) { - bg_pixel = ((((ulg)bg_red << 8) >> RShift) & RMask) | - ((((ulg)bg_green << 8) >> GShift) & GMask) | - ((((ulg)bg_blue << 8) >> BShift) & BMask); - } else /* depth == 8 */ { - - /* GRR: add 8-bit support */ - - } - - XSetForeground(display, gc, bg_pixel); - XFillRectangle(display, window, gc, 0, 0, image_width, image_height); - -/*--------------------------------------------------------------------------- - Wait for first Expose event to do any drawing, then flush. - ---------------------------------------------------------------------------*/ - - do - XNextEvent(display, &e); - while (e.type != Expose || e.xexpose.count); - - XFlush(display); - -/*--------------------------------------------------------------------------- - Allocate memory for the X- and display-specific version of the image. - ---------------------------------------------------------------------------*/ - - if (depth == 24 || depth == 32) { - xdata = (uch *)malloc(4*image_width*image_height); - pad = 32; - } else if (depth == 16) { - xdata = (uch *)malloc(2*image_width*image_height); - pad = 16; - } else /* depth == 8 */ { - xdata = (uch *)malloc(image_width*image_height); - pad = 8; - } - - if (!xdata) { - fprintf(stderr, PROGNAME ": unable to allocate image memory\n"); - return 4; - } - - ximage = XCreateImage(display, visual, depth, ZPixmap, 0, - (char *)xdata, image_width, image_height, pad, 0); - - if (!ximage) { - fprintf(stderr, PROGNAME ": XCreateImage() failed\n"); - free(xdata); - return 3; - } - - /* to avoid testing the byte order every pixel (or doubling the size of - * the drawing routine with a giant if-test), we arbitrarily set the byte - * order to MSBFirst and let Xlib worry about inverting things on little- - * endian machines (like Linux/x86, old VAXen, etc.)--this is not the most - * efficient approach (the giant if-test would be better), but in the - * interest of clarity, we take the easy way out... */ - - ximage->byte_order = MSBFirst; - - return 0; - -} /* end function rpng_x_create_window() */ - - - - - -static int rpng_x_display_image(void) -{ - uch *src; - char *dest; - uch r, g, b, a; - ulg i, row, lastrow = 0; - ulg pixel; - int ximage_rowbytes = ximage->bytes_per_line; -/* int bpp = ximage->bits_per_pixel; */ - - - Trace((stderr, "beginning display loop (image_channels == %d)\n", - image_channels)) - Trace((stderr, " (width = %ld, rowbytes = %ld, ximage_rowbytes = %d)\n", - image_width, image_rowbytes, ximage_rowbytes)) - Trace((stderr, " (bpp = %d)\n", ximage->bits_per_pixel)) - Trace((stderr, " (byte_order = %s)\n", ximage->byte_order == MSBFirst? - "MSBFirst" : (ximage->byte_order == LSBFirst? "LSBFirst" : "unknown"))) - - if (depth == 24 || depth == 32) { - ulg red, green, blue; - - for (lastrow = row = 0; row < image_height; ++row) { - src = image_data + row*image_rowbytes; - dest = ximage->data + row*ximage_rowbytes; - if (image_channels == 3) { - for (i = image_width; i > 0; --i) { - red = *src++; - green = *src++; - blue = *src++; -#ifdef NO_24BIT_MASKS - pixel = (red << RShift) | - (green << GShift) | - (blue << BShift); - /* recall that we set ximage->byte_order = MSBFirst above */ - /* GRR BUG: this assumes bpp == 32, but may be 24: */ - *dest++ = (char)((pixel >> 24) & 0xff); - *dest++ = (char)((pixel >> 16) & 0xff); - *dest++ = (char)((pixel >> 8) & 0xff); - *dest++ = (char)( pixel & 0xff); -#else - red = (RShift < 0)? red << (-RShift) : red >> RShift; - green = (GShift < 0)? green << (-GShift) : green >> GShift; - blue = (BShift < 0)? blue << (-BShift) : blue >> BShift; - pixel = (red & RMask) | (green & GMask) | (blue & BMask); - /* recall that we set ximage->byte_order = MSBFirst above */ - *dest++ = (char)((pixel >> 24) & 0xff); - *dest++ = (char)((pixel >> 16) & 0xff); - *dest++ = (char)((pixel >> 8) & 0xff); - *dest++ = (char)( pixel & 0xff); -#endif - } - } else /* if (image_channels == 4) */ { - for (i = image_width; i > 0; --i) { - r = *src++; - g = *src++; - b = *src++; - a = *src++; - if (a == 255) { - red = r; - green = g; - blue = b; - } else if (a == 0) { - red = bg_red; - green = bg_green; - blue = bg_blue; - } else { - /* this macro (from png.h) composites the foreground - * and background values and puts the result into the - * first argument */ - alpha_composite(red, r, a, bg_red); - alpha_composite(green, g, a, bg_green); - alpha_composite(blue, b, a, bg_blue); - } - pixel = (red << RShift) | - (green << GShift) | - (blue << BShift); - /* recall that we set ximage->byte_order = MSBFirst above */ - *dest++ = (char)((pixel >> 24) & 0xff); - *dest++ = (char)((pixel >> 16) & 0xff); - *dest++ = (char)((pixel >> 8) & 0xff); - *dest++ = (char)( pixel & 0xff); - } - } - /* display after every 16 lines */ - if (((row+1) & 0xf) == 0) { - XPutImage(display, window, gc, ximage, 0, (int)lastrow, 0, - (int)lastrow, image_width, 16); - XFlush(display); - lastrow = row + 1; - } - } - - } else if (depth == 16) { - ush red, green, blue; - - for (lastrow = row = 0; row < image_height; ++row) { - src = image_data + row*image_rowbytes; - dest = ximage->data + row*ximage_rowbytes; - if (image_channels == 3) { - for (i = image_width; i > 0; --i) { - red = ((ush)(*src) << 8); - ++src; - green = ((ush)(*src) << 8); - ++src; - blue = ((ush)(*src) << 8); - ++src; - pixel = ((red >> RShift) & RMask) | - ((green >> GShift) & GMask) | - ((blue >> BShift) & BMask); - /* recall that we set ximage->byte_order = MSBFirst above */ - *dest++ = (char)((pixel >> 8) & 0xff); - *dest++ = (char)( pixel & 0xff); - } - } else /* if (image_channels == 4) */ { - for (i = image_width; i > 0; --i) { - r = *src++; - g = *src++; - b = *src++; - a = *src++; - if (a == 255) { - red = ((ush)r << 8); - green = ((ush)g << 8); - blue = ((ush)b << 8); - } else if (a == 0) { - red = ((ush)bg_red << 8); - green = ((ush)bg_green << 8); - blue = ((ush)bg_blue << 8); - } else { - /* this macro (from png.h) composites the foreground - * and background values and puts the result back into - * the first argument (== fg byte here: safe) */ - alpha_composite(r, r, a, bg_red); - alpha_composite(g, g, a, bg_green); - alpha_composite(b, b, a, bg_blue); - red = ((ush)r << 8); - green = ((ush)g << 8); - blue = ((ush)b << 8); - } - pixel = ((red >> RShift) & RMask) | - ((green >> GShift) & GMask) | - ((blue >> BShift) & BMask); - /* recall that we set ximage->byte_order = MSBFirst above */ - *dest++ = (char)((pixel >> 8) & 0xff); - *dest++ = (char)( pixel & 0xff); - } - } - /* display after every 16 lines */ - if (((row+1) & 0xf) == 0) { - XPutImage(display, window, gc, ximage, 0, (int)lastrow, 0, - (int)lastrow, image_width, 16); - XFlush(display); - lastrow = row + 1; - } - } - - } else /* depth == 8 */ { - - /* GRR: add 8-bit support */ - - } - - Trace((stderr, "calling final XPutImage()\n")) - if (lastrow < image_height) { - XPutImage(display, window, gc, ximage, 0, (int)lastrow, 0, - (int)lastrow, image_width, image_height-lastrow); - XFlush(display); - } - - return 0; -} - - - - -static void rpng_x_cleanup(void) -{ - if (image_data) { - free(image_data); - image_data = NULL; - } - - if (ximage) { - if (ximage->data) { - free(ximage->data); /* we allocated it, so we free it */ - ximage->data = (char *)NULL; /* instead of XDestroyImage() */ - } - XDestroyImage(ximage); - ximage = NULL; - } - - if (have_gc) - XFreeGC(display, gc); - - if (have_window) - XDestroyWindow(display, window); - - if (have_colormap) - XFreeColormap(display, colormap); - - if (have_nondefault_visual) - XFree(visual_list); -} - - - - - -static int rpng_x_msb(ulg u32val) -{ - int i; - - for (i = 31; i >= 0; --i) { - if (u32val & 0x80000000L) - break; - u32val <<= 1; - } - return i; -} diff --git a/contrib/gregbook/rpng2-win.c b/contrib/gregbook/rpng2-win.c deleted file mode 100644 index ed6b526ec..000000000 --- a/contrib/gregbook/rpng2-win.c +++ /dev/null @@ -1,1261 +0,0 @@ -/*--------------------------------------------------------------------------- - - rpng2 - progressive-model PNG display program rpng2-win.c - - This program decodes and displays PNG files progressively, as if it were - a web browser (though the front end is only set up to read from files). - It supports gamma correction, user-specified background colors, and user- - specified background patterns (for transparent images). This version is - for 32-bit Windows; it may compile under 16-bit Windows with a little - tweaking (or maybe not). Thanks to Adam Costello and Pieter S. van der - Meulen for the "diamond" and "radial waves" patterns, respectively. - - to do (someday, maybe): - - handle quoted command-line args (especially filenames with spaces) - - finish resizable checkerboard-gradient (sizes 4-128?) - - use %.1023s to simplify truncation of title-bar string? - - have minimum window width: oh well - - --------------------------------------------------------------------------- - - Changelog: - - 1.01: initial public release - - 1.02: fixed cut-and-paste error in usage screen (oops...) - - 1.03: modified to allow abbreviated options - - 1.04: removed bogus extra argument from usage fprintf() [Glenn R-P?]; - fixed command-line parsing bug - - 1.10: enabled "message window"/console (thanks to David Geldreich) - - 1.20: added runtime MMX-enabling/disabling and new -mmx* options - - 1.21: made minor tweak to usage screen to fit within 25-line console - - 1.22: added AMD64/EM64T support (__x86_64__) - - 2.00: dual-licensed (added GNU GPL) - - 2.01: fixed 64-bit typo in readpng2.c - - 2.02: fixed improper display of usage screen on PNG error(s); fixed - unexpected-EOF and file-read-error cases - - 2.03: removed runtime MMX-enabling/disabling and obsolete -mmx* options - - 2.04: check for integer overflow (Glenn R-P) - - --------------------------------------------------------------------------- - - Copyright (c) 1998-2008, 2017 Greg Roelofs. All rights reserved. - - This software is provided "as is," without warranty of any kind, - express or implied. In no event shall the author or contributors - be held liable for any damages arising in any way from the use of - this software. - - The contents of this file are DUAL-LICENSED. You may modify and/or - redistribute this software according to the terms of one of the - following two licenses (at your option): - - - LICENSE 1 ("BSD-like with advertising clause"): - - Permission is granted to anyone to use this software for any purpose, - including commercial applications, and to alter it and redistribute - it freely, subject to the following restrictions: - - 1. Redistributions of source code must retain the above copyright - notice, disclaimer, and this list of conditions. - 2. Redistributions in binary form must reproduce the above copyright - notice, disclaimer, and this list of conditions in the documenta- - tion and/or other materials provided with the distribution. - 3. All advertising materials mentioning features or use of this - software must display the following acknowledgment: - - This product includes software developed by Greg Roelofs - and contributors for the book, "PNG: The Definitive Guide," - published by O'Reilly and Associates. - - - LICENSE 2 (GNU GPL v2 or later): - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software Foundation, - Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - - ---------------------------------------------------------------------------*/ - -#define PROGNAME "rpng2-win" -#define LONGNAME "Progressive PNG Viewer for Windows" -#define VERSION "2.02 of 16 March 2008" - -#include -#include -#include -#include /* for jmpbuf declaration in readpng2.h */ -#include -#include /* only for PvdM background code */ -#include -#ifdef __CYGWIN__ -/* getch replacement. Turns out, we don't really need this, - * but leave it here if we ever enable any of the uses of - * _getch in the main code - */ -#include -#include -#include -int repl_getch( void ) -{ - char ch; - int fd = fileno(stdin); - struct termio old_tty, new_tty; - - ioctl(fd, TCGETA, &old_tty); - new_tty = old_tty; - new_tty.c_lflag &= ~(ICANON | ECHO | ISIG); - ioctl(fd, TCSETA, &new_tty); - fread(&ch, 1, sizeof(ch), stdin); - ioctl(fd, TCSETA, &old_tty); - - return ch; -} -#define _getch repl_getch -#else -#include /* only for _getch() */ -#endif - -/* all for PvdM background code: */ -#ifndef PI -# define PI 3.141592653589793238 -#endif -#define PI_2 (PI*0.5) -#define INV_PI_360 (360.0 / PI) -#define MAX(a,b) (a>b?a:b) -#define MIN(a,b) (a> 8)) >> 8); \ -} - - -#define INBUFSIZE 4096 /* with pseudo-timing on (1 sec delay/block), this - * block size corresponds roughly to a download - * speed 10% faster than theoretical 33.6K maximum - * (assuming 8 data bits, 1 stop bit and no other - * overhead) */ - -/* local prototypes */ -static void rpng2_win_init(void); -static int rpng2_win_create_window(void); -static int rpng2_win_load_bg_image(void); -static void rpng2_win_display_row(ulg row); -static void rpng2_win_finish_display(void); -static void rpng2_win_cleanup(void); -LRESULT CALLBACK rpng2_win_wndproc(HWND, UINT, WPARAM, LPARAM); - - -static char titlebar[1024]; -static char *progname = PROGNAME; -static char *appname = LONGNAME; -static char *filename; -static FILE *infile; - -static mainprog_info rpng2_info; - -static uch inbuf[INBUFSIZE]; -static int incount; - -static int pat = 6; /* must be less than num_bgpat */ -static int bg_image = 0; -static int bgscale = 16; -static ulg bg_rowbytes; -static uch *bg_data; - -static struct rgb_color { - uch r, g, b; -} rgb[] = { - { 0, 0, 0}, /* 0: black */ - {255, 255, 255}, /* 1: white */ - {173, 132, 57}, /* 2: tan */ - { 64, 132, 0}, /* 3: medium green */ - {189, 117, 1}, /* 4: gold */ - {253, 249, 1}, /* 5: yellow */ - { 0, 0, 255}, /* 6: blue */ - { 0, 0, 120}, /* 7: medium blue */ - {255, 0, 255}, /* 8: magenta */ - { 64, 0, 64}, /* 9: dark magenta */ - {255, 0, 0}, /* 10: red */ - { 64, 0, 0}, /* 11: dark red */ - {255, 127, 0}, /* 12: orange */ - {192, 96, 0}, /* 13: darker orange */ - { 24, 60, 0}, /* 14: dark green-yellow */ - { 85, 125, 200} /* 15: ice blue */ -}; -/* not used for now, but should be for error-checking: -static int num_rgb = sizeof(rgb) / sizeof(struct rgb_color); - */ - -/* - This whole struct is a fairly cheesy way to keep the number of - command-line options to a minimum. The radial-waves background - type is a particularly poor fit to the integer elements of the - struct...but a few macros and a little fixed-point math will do - wonders for ya. - - type bits: - F E D C B A 9 8 7 6 5 4 3 2 1 0 - | | | | | - | | +-+-+-- 0 = sharp-edged checkerboard - | | 1 = soft diamonds - | | 2 = radial waves - | | 3-7 = undefined - | +-- gradient #2 inverted? - +-- alternating columns inverted? - */ -static struct background_pattern { - ush type; - int rgb1_max, rgb1_min; /* or bg_freq, bg_gray */ - int rgb2_max, rgb2_min; /* or bg_bsat, bg_brot (both scaled by 10)*/ -} bg[] = { - {0+8, 2,0, 1,15}, /* checkered: tan/black vs. white/ice blue */ - {0+24, 2,0, 1,0}, /* checkered: tan/black vs. white/black */ - {0+8, 4,5, 0,2}, /* checkered: gold/yellow vs. black/tan */ - {0+8, 4,5, 0,6}, /* checkered: gold/yellow vs. black/blue */ - {0, 7,0, 8,9}, /* checkered: deep blue/black vs. magenta */ - {0+8, 13,0, 5,14}, /* checkered: orange/black vs. yellow */ - {0+8, 12,0, 10,11}, /* checkered: orange/black vs. red */ - {1, 7,0, 8,0}, /* diamonds: deep blue/black vs. magenta */ - {1, 12,0, 11,0}, /* diamonds: orange vs. dark red */ - {1, 10,0, 7,0}, /* diamonds: red vs. medium blue */ - {1, 4,0, 5,0}, /* diamonds: gold vs. yellow */ - {1, 3,0, 0,0}, /* diamonds: medium green vs. black */ - {2, 16, 100, 20, 0}, /* radial: ~hard radial color-beams */ - {2, 18, 100, 10, 2}, /* radial: soft, curved radial color-beams */ - {2, 16, 256, 100, 250}, /* radial: very tight spiral */ - {2, 10000, 256, 11, 0} /* radial: dipole-moire' (almost fractal) */ -}; -static int num_bgpat = sizeof(bg) / sizeof(struct background_pattern); - - -/* Windows-specific global variables (could go in struct, but messy...) */ -static ulg wimage_rowbytes; -static uch *dib; -static uch *wimage_data; -static BITMAPINFOHEADER *bmih; - -static HWND global_hwnd; -static HINSTANCE global_hInst; -static int global_showmode; - - - - -int WINAPI WinMain(HINSTANCE hInst, HINSTANCE hPrevInst, PSTR cmd, int showmode) -{ - char *args[1024]; /* arbitrary limit, but should suffice */ - char **argv = args; - char *p, *q, *bgstr = NULL; - int argc = 0; - int rc, alen, flen; - int error = 0; - int timing = FALSE; - int have_bg = FALSE; - double LUT_exponent; /* just the lookup table */ - double CRT_exponent = 2.2; /* just the monitor */ - double default_display_exponent; /* whole display system */ - MSG msg; - - - /* First initialize a few things, just to be sure--memset takes care of - * default background color (black), booleans (FALSE), pointers (NULL), - * etc. */ - - global_hInst = hInst; - global_showmode = showmode; - filename = (char *)NULL; - memset(&rpng2_info, 0, sizeof(mainprog_info)); - -#ifndef __CYGWIN__ - /* Next reenable console output, which normally goes to the bit bucket - * for windowed apps. Closing the console window will terminate the - * app. Thanks to David.Geldreich at realviz.com for supplying the magical - * incantation. */ - - AllocConsole(); - freopen("CONOUT$", "a", stderr); - freopen("CONOUT$", "a", stdout); -#endif - - /* Set the default value for our display-system exponent, i.e., the - * product of the CRT exponent and the exponent corresponding to - * the frame-buffer's lookup table (LUT), if any. This is not an - * exhaustive list of LUT values (e.g., OpenStep has a lot of weird - * ones), but it should cover 99% of the current possibilities. And - * yes, these ifdefs are completely wasted in a Windows program... */ - -#if defined(NeXT) - /* third-party utilities can modify the default LUT exponent */ - LUT_exponent = 1.0 / 2.2; - /* - if (some_next_function_that_returns_gamma(&next_gamma)) - LUT_exponent = 1.0 / next_gamma; - */ -#elif defined(sgi) - LUT_exponent = 1.0 / 1.7; - /* there doesn't seem to be any documented function to - * get the "gamma" value, so we do it the hard way */ - infile = fopen("/etc/config/system.glGammaVal", "r"); - if (infile) { - double sgi_gamma; - - fgets(tmpline, 80, infile); - fclose(infile); - sgi_gamma = atof(tmpline); - if (sgi_gamma > 0.0) - LUT_exponent = 1.0 / sgi_gamma; - } -#elif defined(Macintosh) - LUT_exponent = 1.8 / 2.61; - /* - if (some_mac_function_that_returns_gamma(&mac_gamma)) - LUT_exponent = mac_gamma / 2.61; - */ -#else - LUT_exponent = 1.0; /* assume no LUT: most PCs */ -#endif - - /* the defaults above give 1.0, 1.3, 1.5 and 2.2, respectively: */ - default_display_exponent = LUT_exponent * CRT_exponent; - - - /* If the user has set the SCREEN_GAMMA environment variable as suggested - * (somewhat imprecisely) in the libpng documentation, use that; otherwise - * use the default value we just calculated. Either way, the user may - * override this via a command-line option. */ - - if ((p = getenv("SCREEN_GAMMA")) != NULL) - rpng2_info.display_exponent = atof(p); - else - rpng2_info.display_exponent = default_display_exponent; - - - /* Windows really hates command lines, so we have to set up our own argv. - * Note that we do NOT bother with quoted arguments here, so don't use - * filenames with spaces in 'em! */ - - argv[argc++] = PROGNAME; - p = cmd; - for (;;) { - if (*p == ' ') - while (*++p == ' ') - ; - /* now p points at the first non-space after some spaces */ - if (*p == '\0') - break; /* nothing after the spaces: done */ - argv[argc++] = q = p; - while (*q && *q != ' ') - ++q; - /* now q points at a space or the end of the string */ - if (*q == '\0') - break; /* last argv already terminated; quit */ - *q = '\0'; /* change space to terminator */ - p = q + 1; - } - argv[argc] = NULL; /* terminate the argv array itself */ - - - /* Now parse the command line for options and the PNG filename. */ - - while (*++argv && !error) { - if (!strncmp(*argv, "-gamma", 2)) { - if (!*++argv) - ++error; - else { - rpng2_info.display_exponent = atof(*argv); - if (rpng2_info.display_exponent <= 0.0) - ++error; - } - } else if (!strncmp(*argv, "-bgcolor", 4)) { - if (!*++argv) - ++error; - else { - bgstr = *argv; - if (strlen(bgstr) != 7 || bgstr[0] != '#') - ++error; - else { - have_bg = TRUE; - bg_image = FALSE; - } - } - } else if (!strncmp(*argv, "-bgpat", 4)) { - if (!*++argv) - ++error; - else { - pat = atoi(*argv) - 1; - if (pat < 0 || pat >= num_bgpat) - ++error; - else { - bg_image = TRUE; - have_bg = FALSE; - } - } - } else if (!strncmp(*argv, "-timing", 2)) { - timing = TRUE; - } else { - if (**argv != '-') { - filename = *argv; - if (argv[1]) /* shouldn't be any more args after filename */ - ++error; - } else - ++error; /* not expecting any other options */ - } - } - - if (!filename) - ++error; - - - /* print usage screen if any errors up to this point */ - - if (error) { -#ifndef __CYGWIN__ - int ch; -#endif - - fprintf(stderr, "\n%s %s: %s\n\n", PROGNAME, VERSION, appname); - readpng2_version_info(); - fprintf(stderr, "\n" - "Usage: %s [-gamma exp] [-bgcolor bg | -bgpat pat] [-timing]\n" - " %*s file.png\n\n" - " exp \ttransfer-function exponent (``gamma'') of the display\n" - "\t\t system in floating-point format (e.g., ``%.1f''); equal\n" - "\t\t to the product of the lookup-table exponent (varies)\n" - "\t\t and the CRT exponent (usually 2.2); must be positive\n" - " bg \tdesired background color in 7-character hex RGB format\n" - "\t\t (e.g., ``#ff7700'' for orange: same as HTML colors);\n" - "\t\t used with transparent images; overrides -bgpat option\n" - " pat \tdesired background pattern number (1-%d); used with\n" - "\t\t transparent images; overrides -bgcolor option\n" - " -timing\tenables delay for every block read, to simulate modem\n" - "\t\t download of image (~36 Kbps)\n" - "\nPress Q, Esc or mouse button 1 after image is displayed to quit.\n" -#ifndef __CYGWIN__ - "Press Q or Esc to quit this usage screen. ", -#else - , -#endif - PROGNAME, -#if (defined(__i386__) || defined(_M_IX86) || defined(__x86_64__)) && \ - !(defined(__CYGWIN__) || defined(__MINGW32__)) - (int)strlen(PROGNAME), " ", -#endif - (int)strlen(PROGNAME), " ", default_display_exponent, num_bgpat); - fflush(stderr); -#ifndef __CYGWIN__ - do - ch = _getch(); - while (ch != 'q' && ch != 'Q' && ch != 0x1B); -#endif - exit(1); - } - - - if (!(infile = fopen(filename, "rb"))) { - fprintf(stderr, PROGNAME ": can't open PNG file [%s]\n", filename); - ++error; - } else { - incount = fread(inbuf, 1, INBUFSIZE, infile); - if (incount < 8 || !readpng2_check_sig(inbuf, 8)) { - fprintf(stderr, PROGNAME - ": [%s] is not a PNG file: incorrect signature\n", - filename); - ++error; - } else if ((rc = readpng2_init(&rpng2_info)) != 0) { - switch (rc) { - case 2: - fprintf(stderr, PROGNAME - ": [%s] has bad IHDR (libpng longjmp)\n", filename); - break; - case 4: - fprintf(stderr, PROGNAME ": insufficient memory\n"); - break; - default: - fprintf(stderr, PROGNAME - ": unknown readpng2_init() error\n"); - break; - } - ++error; - } - if (error) - fclose(infile); - } - - - if (error) { -#ifndef __CYGWIN__ - int ch; -#endif - - fprintf(stderr, PROGNAME ": aborting.\n"); -#ifndef __CYGWIN__ - do - ch = _getch(); - while (ch != 'q' && ch != 'Q' && ch != 0x1B); -#endif - exit(2); - } else { - fprintf(stderr, "\n%s %s: %s\n", PROGNAME, VERSION, appname); -#ifndef __CYGWIN__ - fprintf(stderr, - "\n [console window: closing this window will terminate %s]\n\n", - PROGNAME); -#endif - fflush(stderr); - } - - - /* set the title-bar string, but make sure buffer doesn't overflow */ - - alen = strlen(appname); - flen = strlen(filename); - if (alen + flen + 3 > 1023) - sprintf(titlebar, "%s: ...%s", appname, filename+(alen+flen+6-1023)); - else - sprintf(titlebar, "%s: %s", appname, filename); - - - /* set some final rpng2_info variables before entering main data loop */ - - if (have_bg) { - unsigned r, g, b; /* this approach quiets compiler warnings */ - - sscanf(bgstr+1, "%2x%2x%2x", &r, &g, &b); - rpng2_info.bg_red = (uch)r; - rpng2_info.bg_green = (uch)g; - rpng2_info.bg_blue = (uch)b; - } else - rpng2_info.need_bgcolor = TRUE; - - rpng2_info.state = kPreInit; - rpng2_info.mainprog_init = rpng2_win_init; - rpng2_info.mainprog_display_row = rpng2_win_display_row; - rpng2_info.mainprog_finish_display = rpng2_win_finish_display; - - - /* OK, this is the fun part: call readpng2_decode_data() at the start of - * the loop to deal with our first buffer of data (read in above to verify - * that the file is a PNG image), then loop through the file and continue - * calling the same routine to handle each chunk of data. It in turn - * passes the data to libpng, which will invoke one or more of our call- - * backs as decoded data become available. We optionally call Sleep() for - * one second per iteration to simulate downloading the image via an analog - * modem. */ - - for (;;) { - Trace((stderr, "about to call readpng2_decode_data()\n")) - if (readpng2_decode_data(&rpng2_info, inbuf, incount)) - ++error; - Trace((stderr, "done with readpng2_decode_data()\n")) - - if (error || incount != INBUFSIZE || rpng2_info.state == kDone) { - if (rpng2_info.state == kDone) { - Trace((stderr, "done decoding PNG image\n")) - } else if (ferror(infile)) { - fprintf(stderr, PROGNAME - ": error while reading PNG image file\n"); - exit(3); - } else if (feof(infile)) { - fprintf(stderr, PROGNAME ": end of file reached " - "(unexpectedly) while reading PNG image file\n"); - exit(3); - } else /* if (error) */ { - /* will print error message below */ - } - break; - } - - if (timing) - Sleep(1000L); - - incount = fread(inbuf, 1, INBUFSIZE, infile); - } - - - /* clean up PNG stuff and report any decoding errors */ - - fclose(infile); - Trace((stderr, "about to call readpng2_cleanup()\n")) - readpng2_cleanup(&rpng2_info); - - if (error) { - fprintf(stderr, PROGNAME ": libpng error while decoding PNG image\n"); - exit(3); - } - - - /* wait for the user to tell us when to quit */ - - while (GetMessage(&msg, NULL, 0, 0)) { - TranslateMessage(&msg); - DispatchMessage(&msg); - } - - - /* we're done: clean up all image and Windows resources and go away */ - - Trace((stderr, "about to call rpng2_win_cleanup()\n")) - rpng2_win_cleanup(); - - return msg.wParam; -} - - - - - -/* this function is called by readpng2_info_callback() in readpng2.c, which - * in turn is called by libpng after all of the pre-IDAT chunks have been - * read and processed--i.e., we now have enough info to finish initializing */ - -static void rpng2_win_init() -{ - ulg i; - ulg rowbytes = rpng2_info.rowbytes; - - Trace((stderr, "beginning rpng2_win_init()\n")) - Trace((stderr, " rowbytes = %d\n", rpng2_info.rowbytes)) - Trace((stderr, " width = %ld\n", rpng2_info.width)) - Trace((stderr, " height = %ld\n", rpng2_info.height)) - - /* Guard against integer overflow */ - if (rpng2_info.height > ((size_t)(-1))/rowbytes) { - fprintf(stderr, PROGNAME ": image_data buffer would be too large\n", - readpng2_cleanup(&rpng2_info); - return; - } - - rpng2_info.image_data = (uch *)malloc(rowbytes * rpng2_info.height); - if (!rpng2_info.image_data) { - readpng2_cleanup(&rpng2_info); - return; - } - - rpng2_info.row_pointers = (uch **)malloc(rpng2_info.height * sizeof(uch *)); - if (!rpng2_info.row_pointers) { - free(rpng2_info.image_data); - rpng2_info.image_data = NULL; - readpng2_cleanup(&rpng2_info); - return; - } - - for (i = 0; i < rpng2_info.height; ++i) - rpng2_info.row_pointers[i] = rpng2_info.image_data + i*rowbytes; - -/*--------------------------------------------------------------------------- - Do the basic Windows initialization stuff, make the window, and fill it - with the user-specified, file-specified or default background color. - ---------------------------------------------------------------------------*/ - - if (rpng2_win_create_window()) { - readpng2_cleanup(&rpng2_info); - return; - } - - rpng2_info.state = kWindowInit; -} - - - - - -static int rpng2_win_create_window() -{ - uch bg_red = rpng2_info.bg_red; - uch bg_green = rpng2_info.bg_green; - uch bg_blue = rpng2_info.bg_blue; - uch *dest; - int extra_width, extra_height; - ulg i, j; - WNDCLASSEX wndclass; - RECT rect; - - -/*--------------------------------------------------------------------------- - Allocate memory for the display-specific version of the image (round up - to multiple of 4 for Windows DIB). - ---------------------------------------------------------------------------*/ - - wimage_rowbytes = ((3*rpng2_info.width + 3L) >> 2) << 2; - - if (!(dib = (uch *)malloc(sizeof(BITMAPINFOHEADER) + - wimage_rowbytes*rpng2_info.height))) - { - return 4; /* fail */ - } - -/*--------------------------------------------------------------------------- - Initialize the DIB. Negative height means to use top-down BMP ordering - (must be uncompressed, but that's what we want). Bit count of 1, 4 or 8 - implies a colormap of RGBX quads, but 24-bit BMPs just use B,G,R values - directly => wimage_data begins immediately after BMP header. - ---------------------------------------------------------------------------*/ - - memset(dib, 0, sizeof(BITMAPINFOHEADER)); - bmih = (BITMAPINFOHEADER *)dib; - bmih->biSize = sizeof(BITMAPINFOHEADER); - bmih->biWidth = rpng2_info.width; - bmih->biHeight = -((long)rpng2_info.height); - bmih->biPlanes = 1; - bmih->biBitCount = 24; - bmih->biCompression = 0; - wimage_data = dib + sizeof(BITMAPINFOHEADER); - -/*--------------------------------------------------------------------------- - Fill window with the specified background color (default is black), but - defer loading faked "background image" until window is displayed (may be - slow to compute). Data are in BGR order. - ---------------------------------------------------------------------------*/ - - if (bg_image) { /* just fill with black for now */ - memset(wimage_data, 0, wimage_rowbytes*rpng2_info.height); - } else { - for (j = 0; j < rpng2_info.height; ++j) { - dest = wimage_data + j*wimage_rowbytes; - for (i = rpng2_info.width; i > 0; --i) { - *dest++ = bg_blue; - *dest++ = bg_green; - *dest++ = bg_red; - } - } - } - -/*--------------------------------------------------------------------------- - Set the window parameters. - ---------------------------------------------------------------------------*/ - - memset(&wndclass, 0, sizeof(wndclass)); - - wndclass.cbSize = sizeof(wndclass); - wndclass.style = CS_HREDRAW | CS_VREDRAW; - wndclass.lpfnWndProc = rpng2_win_wndproc; - wndclass.hInstance = global_hInst; - wndclass.hIcon = LoadIcon(NULL, IDI_APPLICATION); - wndclass.hCursor = LoadCursor(NULL, IDC_ARROW); - wndclass.hbrBackground = (HBRUSH)GetStockObject(DKGRAY_BRUSH); - wndclass.lpszMenuName = NULL; - wndclass.lpszClassName = progname; - wndclass.hIconSm = LoadIcon(NULL, IDI_APPLICATION); - - RegisterClassEx(&wndclass); - -/*--------------------------------------------------------------------------- - Finally, create the window. - ---------------------------------------------------------------------------*/ - - extra_width = 2*(GetSystemMetrics(SM_CXBORDER) + - GetSystemMetrics(SM_CXDLGFRAME)); - extra_height = 2*(GetSystemMetrics(SM_CYBORDER) + - GetSystemMetrics(SM_CYDLGFRAME)) + - GetSystemMetrics(SM_CYCAPTION); - - global_hwnd = CreateWindow(progname, titlebar, WS_OVERLAPPEDWINDOW, - CW_USEDEFAULT, CW_USEDEFAULT, rpng2_info.width+extra_width, - rpng2_info.height+extra_height, NULL, NULL, global_hInst, NULL); - - ShowWindow(global_hwnd, global_showmode); - UpdateWindow(global_hwnd); - -/*--------------------------------------------------------------------------- - Now compute the background image and display it. If it fails (memory - allocation), revert to a plain background color. - ---------------------------------------------------------------------------*/ - - if (bg_image) { - static const char *msg = "Computing background image..."; - int x, y, len = strlen(msg); - HDC hdc = GetDC(global_hwnd); - TEXTMETRIC tm; - - GetTextMetrics(hdc, &tm); - x = (rpng2_info.width - len*tm.tmAveCharWidth)/2; - y = (rpng2_info.height - tm.tmHeight)/2; - SetBkMode(hdc, TRANSPARENT); - SetTextColor(hdc, GetSysColor(COLOR_HIGHLIGHTTEXT)); - /* this can still begin out of bounds even if x is positive (???): */ - TextOut(hdc, ((x < 0)? 0 : x), ((y < 0)? 0 : y), msg, len); - ReleaseDC(global_hwnd, hdc); - - rpng2_win_load_bg_image(); /* resets bg_image if fails */ - } - - if (!bg_image) { - for (j = 0; j < rpng2_info.height; ++j) { - dest = wimage_data + j*wimage_rowbytes; - for (i = rpng2_info.width; i > 0; --i) { - *dest++ = bg_blue; - *dest++ = bg_green; - *dest++ = bg_red; - } - } - } - - rect.left = 0L; - rect.top = 0L; - rect.right = (LONG)rpng2_info.width; /* possibly off by one? */ - rect.bottom = (LONG)rpng2_info.height; /* possibly off by one? */ - InvalidateRect(global_hwnd, &rect, FALSE); - UpdateWindow(global_hwnd); /* similar to XFlush() */ - - return 0; - -} /* end function rpng2_win_create_window() */ - - - - - -static int rpng2_win_load_bg_image() -{ - uch *src, *dest; - uch r1, r2, g1, g2, b1, b2; - uch r1_inv, r2_inv, g1_inv, g2_inv, b1_inv, b2_inv; - int k, hmax, max; - int xidx, yidx, yidx_max = (bgscale-1); - int even_odd_vert, even_odd_horiz, even_odd; - int invert_gradient2 = (bg[pat].type & 0x08); - int invert_column; - ulg i, row; - -/*--------------------------------------------------------------------------- - Allocate buffer for fake background image to be used with transparent - images; if this fails, revert to plain background color. - ---------------------------------------------------------------------------*/ - - bg_rowbytes = 3 * rpng2_info.width; - bg_data = (uch *)malloc(bg_rowbytes * rpng2_info.height); - if (!bg_data) { - fprintf(stderr, PROGNAME - ": unable to allocate memory for background image\n"); - bg_image = 0; - return 1; - } - -/*--------------------------------------------------------------------------- - Vertical gradients (ramps) in NxN squares, alternating direction and - colors (N == bgscale). - ---------------------------------------------------------------------------*/ - - if ((bg[pat].type & 0x07) == 0) { - uch r1_min = rgb[bg[pat].rgb1_min].r; - uch g1_min = rgb[bg[pat].rgb1_min].g; - uch b1_min = rgb[bg[pat].rgb1_min].b; - uch r2_min = rgb[bg[pat].rgb2_min].r; - uch g2_min = rgb[bg[pat].rgb2_min].g; - uch b2_min = rgb[bg[pat].rgb2_min].b; - int r1_diff = rgb[bg[pat].rgb1_max].r - r1_min; - int g1_diff = rgb[bg[pat].rgb1_max].g - g1_min; - int b1_diff = rgb[bg[pat].rgb1_max].b - b1_min; - int r2_diff = rgb[bg[pat].rgb2_max].r - r2_min; - int g2_diff = rgb[bg[pat].rgb2_max].g - g2_min; - int b2_diff = rgb[bg[pat].rgb2_max].b - b2_min; - - for (row = 0; row < rpng2_info.height; ++row) { - yidx = row % bgscale; - even_odd_vert = (row / bgscale) & 1; - - r1 = r1_min + (r1_diff * yidx) / yidx_max; - g1 = g1_min + (g1_diff * yidx) / yidx_max; - b1 = b1_min + (b1_diff * yidx) / yidx_max; - r1_inv = r1_min + (r1_diff * (yidx_max-yidx)) / yidx_max; - g1_inv = g1_min + (g1_diff * (yidx_max-yidx)) / yidx_max; - b1_inv = b1_min + (b1_diff * (yidx_max-yidx)) / yidx_max; - - r2 = r2_min + (r2_diff * yidx) / yidx_max; - g2 = g2_min + (g2_diff * yidx) / yidx_max; - b2 = b2_min + (b2_diff * yidx) / yidx_max; - r2_inv = r2_min + (r2_diff * (yidx_max-yidx)) / yidx_max; - g2_inv = g2_min + (g2_diff * (yidx_max-yidx)) / yidx_max; - b2_inv = b2_min + (b2_diff * (yidx_max-yidx)) / yidx_max; - - dest = bg_data + row*bg_rowbytes; - for (i = 0; i < rpng2_info.width; ++i) { - even_odd_horiz = (i / bgscale) & 1; - even_odd = even_odd_vert ^ even_odd_horiz; - invert_column = - (even_odd_horiz && (bg[pat].type & 0x10)); - if (even_odd == 0) { /* gradient #1 */ - if (invert_column) { - *dest++ = r1_inv; - *dest++ = g1_inv; - *dest++ = b1_inv; - } else { - *dest++ = r1; - *dest++ = g1; - *dest++ = b1; - } - } else { /* gradient #2 */ - if ((invert_column && invert_gradient2) || - (!invert_column && !invert_gradient2)) - { - *dest++ = r2; /* not inverted or */ - *dest++ = g2; /* doubly inverted */ - *dest++ = b2; - } else { - *dest++ = r2_inv; - *dest++ = g2_inv; /* singly inverted */ - *dest++ = b2_inv; - } - } - } - } - -/*--------------------------------------------------------------------------- - Soft gradient-diamonds with scale = bgscale. Code contributed by Adam - M. Costello. - ---------------------------------------------------------------------------*/ - - } else if ((bg[pat].type & 0x07) == 1) { - - hmax = (bgscale-1)/2; /* half the max weight of a color */ - max = 2*hmax; /* the max weight of a color */ - - r1 = rgb[bg[pat].rgb1_max].r; - g1 = rgb[bg[pat].rgb1_max].g; - b1 = rgb[bg[pat].rgb1_max].b; - r2 = rgb[bg[pat].rgb2_max].r; - g2 = rgb[bg[pat].rgb2_max].g; - b2 = rgb[bg[pat].rgb2_max].b; - - for (row = 0; row < rpng2_info.height; ++row) { - yidx = row % bgscale; - if (yidx > hmax) - yidx = bgscale-1 - yidx; - dest = bg_data + row*bg_rowbytes; - for (i = 0; i < rpng2_info.width; ++i) { - xidx = i % bgscale; - if (xidx > hmax) - xidx = bgscale-1 - xidx; - k = xidx + yidx; - *dest++ = (k*r1 + (max-k)*r2) / max; - *dest++ = (k*g1 + (max-k)*g2) / max; - *dest++ = (k*b1 + (max-k)*b2) / max; - } - } - -/*--------------------------------------------------------------------------- - Radial "starburst" with azimuthal sinusoids; [eventually number of sinu- - soids will equal bgscale?]. This one is slow but very cool. Code con- - tributed by Pieter S. van der Meulen (originally in Smalltalk). - ---------------------------------------------------------------------------*/ - - } else if ((bg[pat].type & 0x07) == 2) { - uch ch; - int ii, x, y, hw, hh, grayspot; - double freq, rotate, saturate, gray, intensity; - double angle=0.0, aoffset=0.0, maxDist, dist; - double red=0.0, green=0.0, blue=0.0, hue, s, v, f, p, q, t; - - fprintf(stderr, "%s: computing radial background...", - PROGNAME); - fflush(stderr); - - hh = rpng2_info.height / 2; - hw = rpng2_info.width / 2; - - /* variables for radial waves: - * aoffset: number of degrees to rotate hue [CURRENTLY NOT USED] - * freq: number of color beams originating from the center - * grayspot: size of the graying center area (anti-alias) - * rotate: rotation of the beams as a function of radius - * saturate: saturation of beams' shape azimuthally - */ - angle = CLIP(angle, 0.0, 360.0); - grayspot = CLIP(bg[pat].bg_gray, 1, (hh + hw)); - freq = MAX((double)bg[pat].bg_freq, 0.0); - saturate = (double)bg[pat].bg_bsat * 0.1; - rotate = (double)bg[pat].bg_brot * 0.1; - gray = 0.0; - intensity = 0.0; - maxDist = (double)((hw*hw) + (hh*hh)); - - for (row = 0; row < rpng2_info.height; ++row) { - y = row - hh; - dest = bg_data + row*bg_rowbytes; - for (i = 0; i < rpng2_info.width; ++i) { - x = i - hw; - angle = (x == 0)? PI_2 : atan((double)y / (double)x); - gray = (double)MAX(ABS(y), ABS(x)) / grayspot; - gray = MIN(1.0, gray); - dist = (double)((x*x) + (y*y)) / maxDist; - intensity = cos((angle+(rotate*dist*PI)) * freq) * - gray * saturate; - intensity = (MAX(MIN(intensity,1.0),-1.0) + 1.0) * 0.5; - hue = (angle + PI) * INV_PI_360 + aoffset; - s = gray * ((double)(ABS(x)+ABS(y)) / (double)(hw + hh)); - s = MIN(MAX(s,0.0), 1.0); - v = MIN(MAX(intensity,0.0), 1.0); - - if (s == 0.0) { - ch = (uch)(v * 255.0); - *dest++ = ch; - *dest++ = ch; - *dest++ = ch; - } else { - if ((hue < 0.0) || (hue >= 360.0)) - hue -= (((int)(hue / 360.0)) * 360.0); - hue /= 60.0; - ii = (int)hue; - f = hue - (double)ii; - p = (1.0 - s) * v; - q = (1.0 - (s * f)) * v; - t = (1.0 - (s * (1.0 - f))) * v; - if (ii == 0) { red = v; green = t; blue = p; } - else if (ii == 1) { red = q; green = v; blue = p; } - else if (ii == 2) { red = p; green = v; blue = t; } - else if (ii == 3) { red = p; green = q; blue = v; } - else if (ii == 4) { red = t; green = p; blue = v; } - else if (ii == 5) { red = v; green = p; blue = q; } - *dest++ = (uch)(red * 255.0); - *dest++ = (uch)(green * 255.0); - *dest++ = (uch)(blue * 255.0); - } - } - } - fprintf(stderr, "done.\n"); - fflush(stderr); - } - -/*--------------------------------------------------------------------------- - Blast background image to display buffer before beginning PNG decode; - calling function will handle invalidation and UpdateWindow() call. - ---------------------------------------------------------------------------*/ - - for (row = 0; row < rpng2_info.height; ++row) { - src = bg_data + row*bg_rowbytes; - dest = wimage_data + row*wimage_rowbytes; - for (i = rpng2_info.width; i > 0; --i) { - r1 = *src++; - g1 = *src++; - b1 = *src++; - *dest++ = b1; - *dest++ = g1; /* note reverse order */ - *dest++ = r1; - } - } - - return 0; - -} /* end function rpng2_win_load_bg_image() */ - - - - - -static void rpng2_win_display_row(ulg row) -{ - uch bg_red = rpng2_info.bg_red; - uch bg_green = rpng2_info.bg_green; - uch bg_blue = rpng2_info.bg_blue; - uch *src, *src2=NULL, *dest; - uch r, g, b, a; - ulg i; - static int rows=0; - static ulg firstrow; - -/*--------------------------------------------------------------------------- - rows and firstrow simply track how many rows (and which ones) have not - yet been displayed; alternatively, we could call InvalidateRect() for - every row and not bother with the records-keeping. - ---------------------------------------------------------------------------*/ - - Trace((stderr, "beginning rpng2_win_display_row()\n")) - - if (rows == 0) - firstrow = row; /* first row not yet displayed */ - - ++rows; /* count of rows received but not yet displayed */ - -/*--------------------------------------------------------------------------- - Aside from the use of the rpng2_info struct and the lack of an outer - loop (over rows), this routine is identical to rpng_win_display_image() - in the non-progressive version of the program. - ---------------------------------------------------------------------------*/ - - src = rpng2_info.image_data + row*rpng2_info.rowbytes; - if (bg_image) - src2 = bg_data + row*bg_rowbytes; - dest = wimage_data + row*wimage_rowbytes; - - if (rpng2_info.channels == 3) { - for (i = rpng2_info.width; i > 0; --i) { - r = *src++; - g = *src++; - b = *src++; - *dest++ = b; - *dest++ = g; /* note reverse order */ - *dest++ = r; - } - } else /* if (rpng2_info.channels == 4) */ { - for (i = rpng2_info.width; i > 0; --i) { - r = *src++; - g = *src++; - b = *src++; - a = *src++; - if (bg_image) { - bg_red = *src2++; - bg_green = *src2++; - bg_blue = *src2++; - } - if (a == 255) { - *dest++ = b; - *dest++ = g; - *dest++ = r; - } else if (a == 0) { - *dest++ = bg_blue; - *dest++ = bg_green; - *dest++ = bg_red; - } else { - /* this macro (copied from png.h) composites the - * foreground and background values and puts the - * result into the first argument; there are no - * side effects with the first argument */ - alpha_composite(*dest++, b, a, bg_blue); - alpha_composite(*dest++, g, a, bg_green); - alpha_composite(*dest++, r, a, bg_red); - } - } - } - -/*--------------------------------------------------------------------------- - Display after every 16 rows or when on last row. (Region may include - previously displayed lines due to interlacing--i.e., not contiguous.) - ---------------------------------------------------------------------------*/ - - if ((rows & 0xf) == 0 || row == rpng2_info.height-1) { - RECT rect; - - rect.left = 0L; - rect.top = (LONG)firstrow; - rect.right = (LONG)rpng2_info.width; /* possibly off by one? */ - rect.bottom = (LONG)row + 1L; /* possibly off by one? */ - InvalidateRect(global_hwnd, &rect, FALSE); - UpdateWindow(global_hwnd); /* similar to XFlush() */ - rows = 0; - } - -} /* end function rpng2_win_display_row() */ - - - - - -static void rpng2_win_finish_display() -{ - Trace((stderr, "beginning rpng2_win_finish_display()\n")) - - /* last row has already been displayed by rpng2_win_display_row(), so - * we have nothing to do here except set a flag and let the user know - * that the image is done */ - - rpng2_info.state = kDone; - printf( -#ifndef __CYGWIN__ - "Done. Press Q, Esc or mouse button 1 (within image window) to quit.\n" -#else - "Done. Press mouse button 1 (within image window) to quit.\n" -#endif - ); - fflush(stdout); -} - - - - - -static void rpng2_win_cleanup() -{ - if (bg_image && bg_data) { - free(bg_data); - bg_data = NULL; - } - - if (rpng2_info.image_data) { - free(rpng2_info.image_data); - rpng2_info.image_data = NULL; - } - - if (rpng2_info.row_pointers) { - free(rpng2_info.row_pointers); - rpng2_info.row_pointers = NULL; - } - - if (dib) { - free(dib); - dib = NULL; - } -} - - - - - -LRESULT CALLBACK rpng2_win_wndproc(HWND hwnd, UINT iMsg, WPARAM wP, LPARAM lP) -{ - HDC hdc; - PAINTSTRUCT ps; - int rc; - - switch (iMsg) { - case WM_CREATE: - /* one-time processing here, if any */ - return 0; - - case WM_PAINT: - hdc = BeginPaint(hwnd, &ps); - rc = StretchDIBits(hdc, 0, 0, rpng2_info.width, rpng2_info.height, - 0, 0, rpng2_info.width, rpng2_info.height, - wimage_data, (BITMAPINFO *)bmih, - 0, SRCCOPY); - EndPaint(hwnd, &ps); - return 0; - - /* wait for the user to tell us when to quit */ - case WM_CHAR: - switch (wP) { /* only need one, so ignore repeat count */ - case 'q': - case 'Q': - case 0x1B: /* Esc key */ - PostQuitMessage(0); - } - return 0; - - case WM_LBUTTONDOWN: /* another way of quitting */ - case WM_DESTROY: - PostQuitMessage(0); - return 0; - } - - return DefWindowProc(hwnd, iMsg, wP, lP); -} diff --git a/contrib/gregbook/rpng2-x.c b/contrib/gregbook/rpng2-x.c deleted file mode 100644 index af944c0f2..000000000 --- a/contrib/gregbook/rpng2-x.c +++ /dev/null @@ -1,2143 +0,0 @@ -/*--------------------------------------------------------------------------- - - rpng2 - progressive-model PNG display program rpng2-x.c - - This program decodes and displays PNG files progressively, as if it were - a web browser (though the front end is only set up to read from files). - It supports gamma correction, user-specified background colors, and user- - specified background patterns (for transparent images). This version is - for the X Window System (tested by the author under Unix and by Martin - Zinser under OpenVMS; may work under OS/2 with a little tweaking). - - Thanks to Adam Costello and Pieter S. van der Meulen for the "diamond" - and "radial waves" patterns, respectively. - - to do (someday, maybe): - - fix expose/redraw code: don't draw entire row if only part exposed - - 8-bit (colormapped) X support - - finish resizable checkerboard-gradient (sizes 4-128?) - - use %.1023s to simplify truncation of title-bar string? - - --------------------------------------------------------------------------- - - Changelog: - - 1.01: initial public release - - 1.02: modified to allow abbreviated options; fixed char/uchar mismatch - - 1.10: added support for non-default visuals; fixed X pixel-conversion - - 1.11: added -usleep option for demos; fixed command-line parsing bug - - 1.12: added -pause option for demos and testing - - 1.20: added runtime MMX-enabling/disabling and new -mmx* options - - 1.21: fixed some small X memory leaks (thanks to François Petitjean) - - 1.22: fixed XFreeGC() crash bug (thanks to Patrick Welche) - - 1.23: added -bgpat 0 mode (std white/gray checkerboard, 8x8 squares) - - 1.30: added -loop option for -bgpat (ifdef FEATURE_LOOP); fixed bpp = - 24; added support for X resources (thanks to Gerhard Niklasch) - - 1.31: added code to skip unused chunks (thanks to Glenn Randers-Pehrson) - - 1.32: added AMD64/EM64T support (__x86_64__); added basic expose/redraw - handling - - 2.00: dual-licensed (added GNU GPL) - - 2.01: fixed 64-bit typo in readpng2.c; fixed -pause usage description - - 2.02: fixed improper display of usage screen on PNG error(s); fixed - unexpected-EOF and file-read-error cases; fixed Trace() cut-and- - paste bugs - - 2.03: deleted runtime MMX-enabling/disabling and obsolete -mmx* options - - 2.04: Added "void(foo);" statements to quiet pedantic compiler warnings - about unused variables (GR-P) - - 2.05: Use nanosleep() instead of usleep(), which is deprecated (GR-P). - - 2.06: check for integer overflow (Glenn R-P) - --------------------------------------------------------------------------- - - Copyright (c) 1998-2010, 2014-2015, 2017 Greg Roelofs. All rights - reserved. - - This software is provided "as is," without warranty of any kind, - express or implied. In no event shall the author or contributors - be held liable for any damages arising in any way from the use of - this software. - - The contents of this file are DUAL-LICENSED. You may modify and/or - redistribute this software according to the terms of one of the - following two licenses (at your option): - - - LICENSE 1 ("BSD-like with advertising clause"): - - Permission is granted to anyone to use this software for any purpose, - including commercial applications, and to alter it and redistribute - it freely, subject to the following restrictions: - - 1. Redistributions of source code must retain the above copyright - notice, disclaimer, and this list of conditions. - 2. Redistributions in binary form must reproduce the above copyright - notice, disclaimer, and this list of conditions in the documenta- - tion and/or other materials provided with the distribution. - 3. All advertising materials mentioning features or use of this - software must display the following acknowledgment: - - This product includes software developed by Greg Roelofs - and contributors for the book, "PNG: The Definitive Guide," - published by O'Reilly and Associates. - - - LICENSE 2 (GNU GPL v2 or later): - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software Foundation, - Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - - ---------------------------------------------------------------------------*/ - -#define PROGNAME "rpng2-x" -#define LONGNAME "Progressive PNG Viewer for X" -#define VERSION "2.04 of 15 June 2014" -#define RESNAME "rpng2" /* our X resource application name */ -#define RESCLASS "Rpng" /* our X resource class name */ - -#include -#include -#include -#include -#include /* for jmpbuf declaration in readpng2.h */ -#include -#include /* only for PvdM background code */ -#include -#include -#include -#include /* defines XK_* macros */ - -#if _POSIX_C_SOURCE >= 199309L /* have nanosleep() */ -# undef usleep -# define usleep(usec) { \ - struct timespec ts; \ - ts.tv_sec = 0; \ - ts.tv_nsec = (usec) * 1000; \ - nanosleep(&ts, NULL); } -# endif - -#ifndef usleep /* have neither nanosleep() nor usleep() */ -# define usleep(x) sleep(((x)+499999)/1000000) -#endif - -#ifdef VMS -# include -#endif - -/* all for PvdM background code: */ -#ifndef PI -# define PI 3.141592653589793238 -#endif -#define PI_2 (PI*0.5) -#define INV_PI_360 (360.0 / PI) -#define MAX(a,b) (a>b?a:b) -#define MIN(a,b) (a> 8)) >> 8); \ -} - - -#define INBUFSIZE 4096 /* with pseudo-timing on (1 sec delay/block), this - * block size corresponds roughly to a download - * speed 10% faster than theoretical 33.6K maximum - * (assuming 8 data bits, 1 stop bit and no other - * overhead) */ - -/* local prototypes */ -static void rpng2_x_init (void); -static int rpng2_x_create_window (void); -static int rpng2_x_load_bg_image (void); -static void rpng2_x_display_row (ulg row); -static void rpng2_x_finish_display (void); -static void rpng2_x_redisplay_image (ulg startcol, ulg startrow, - ulg width, ulg height); -#ifdef FEATURE_LOOP -static void rpng2_x_reload_bg_image (void); -static int is_number (char *p); -#endif -static void rpng2_x_cleanup (void); -static int rpng2_x_msb (ulg u32val); - - -static char titlebar[1024], *window_name = titlebar; -static char *appname = LONGNAME; -static char *icon_name = PROGNAME; -static char *res_name = RESNAME; -static char *res_class = RESCLASS; -static char *filename; -static FILE *infile; - -static mainprog_info rpng2_info; - -static uch inbuf[INBUFSIZE]; -static int incount; - -static int pat = 6; /* must be less than num_bgpat */ -static int bg_image = 0; -static int bgscale, bgscale_default = 16; -static ulg bg_rowbytes; -static uch *bg_data; - -int pause_after_pass = FALSE; -int demo_timing = FALSE; -ulg usleep_duration = 0L; - -static struct rgb_color { - uch r, g, b; -} rgb[] = { - { 0, 0, 0}, /* 0: black */ - {255, 255, 255}, /* 1: white */ - {173, 132, 57}, /* 2: tan */ - { 64, 132, 0}, /* 3: medium green */ - {189, 117, 1}, /* 4: gold */ - {253, 249, 1}, /* 5: yellow */ - { 0, 0, 255}, /* 6: blue */ - { 0, 0, 120}, /* 7: medium blue */ - {255, 0, 255}, /* 8: magenta */ - { 64, 0, 64}, /* 9: dark magenta */ - {255, 0, 0}, /* 10: red */ - { 64, 0, 0}, /* 11: dark red */ - {255, 127, 0}, /* 12: orange */ - {192, 96, 0}, /* 13: darker orange */ - { 24, 60, 0}, /* 14: dark green-yellow */ - { 85, 125, 200}, /* 15: ice blue */ - {192, 192, 192} /* 16: Netscape/Mosaic gray */ -}; -/* not used for now, but should be for error-checking: -static int num_rgb = sizeof(rgb) / sizeof(struct rgb_color); - */ - -/* - This whole struct is a fairly cheesy way to keep the number of - command-line options to a minimum. The radial-waves background - type is a particularly poor fit to the integer elements of the - struct...but a few macros and a little fixed-point math will do - wonders for ya. - - type bits: - F E D C B A 9 8 7 6 5 4 3 2 1 0 - | | | | | - | | +-+-+-- 0 = sharp-edged checkerboard - | | 1 = soft diamonds - | | 2 = radial waves - | | 3-7 = undefined - | +-- gradient #2 inverted? - +-- alternating columns inverted? - */ -static struct background_pattern { - ush type; - int rgb1_max, rgb1_min; /* or bg_freq, bg_gray */ - int rgb2_max, rgb2_min; /* or bg_bsat, bg_brot (both scaled by 10)*/ -} bg[] = { - {0, 1,1, 16,16}, /* checkered: white vs. light gray (basic) */ - {0+8, 2,0, 1,15}, /* checkered: tan/black vs. white/ice blue */ - {0+24, 2,0, 1,0}, /* checkered: tan/black vs. white/black */ - {0+8, 4,5, 0,2}, /* checkered: gold/yellow vs. black/tan */ - {0+8, 4,5, 0,6}, /* checkered: gold/yellow vs. black/blue */ - {0, 7,0, 8,9}, /* checkered: deep blue/black vs. magenta */ - {0+8, 13,0, 5,14}, /* checkered: orange/black vs. yellow */ - {0+8, 12,0, 10,11}, /* checkered: orange/black vs. red */ - {1, 7,0, 8,0}, /* diamonds: deep blue/black vs. magenta */ - {1, 12,0, 11,0}, /* diamonds: orange vs. dark red */ - {1, 10,0, 7,0}, /* diamonds: red vs. medium blue */ - {1, 4,0, 5,0}, /* diamonds: gold vs. yellow */ - {1, 3,0, 0,0}, /* diamonds: medium green vs. black */ - {2, 16, 100, 20, 0}, /* radial: ~hard radial color-beams */ - {2, 18, 100, 10, 2}, /* radial: soft, curved radial color-beams */ - {2, 16, 256, 100, 250}, /* radial: very tight spiral */ - {2, 10000, 256, 11, 0} /* radial: dipole-moire' (almost fractal) */ -}; -static int num_bgpat = sizeof(bg) / sizeof(struct background_pattern); - - -/* X-specific variables */ -static char *displayname; -static XImage *ximage; -static Display *display; -static int depth; -static Visual *visual; -static XVisualInfo *visual_list; -static int RShift, GShift, BShift; -static ulg RMask, GMask, BMask; -static Window window; -static GC gc; -static Colormap colormap; - -static int have_nondefault_visual = FALSE; -static int have_colormap = FALSE; -static int have_window = FALSE; -static int have_gc = FALSE; - - - - -int main(int argc, char **argv) -{ -#ifdef sgi - char tmpline[80]; -#endif - char *p, *bgstr = NULL; - int rc, alen, flen; - int error = 0; - int timing = FALSE; - int have_bg = FALSE; -#ifdef FEATURE_LOOP - int loop = FALSE; - long loop_interval = -1; /* seconds (100,000 max) */ -#endif - double LUT_exponent; /* just the lookup table */ - double CRT_exponent = 2.2; /* just the monitor */ - double default_display_exponent; /* whole display system */ - XEvent e; - KeySym k; - - - /* First initialize a few things, just to be sure--memset takes care of - * default background color (black), booleans (FALSE), pointers (NULL), - * etc. */ - - displayname = (char *)NULL; - filename = (char *)NULL; - memset(&rpng2_info, 0, sizeof(mainprog_info)); - - - /* Set the default value for our display-system exponent, i.e., the - * product of the CRT exponent and the exponent corresponding to - * the frame-buffer's lookup table (LUT), if any. This is not an - * exhaustive list of LUT values (e.g., OpenStep has a lot of weird - * ones), but it should cover 99% of the current possibilities. */ - -#if defined(NeXT) - /* third-party utilities can modify the default LUT exponent */ - LUT_exponent = 1.0 / 2.2; - /* - if (some_next_function_that_returns_gamma(&next_gamma)) - LUT_exponent = 1.0 / next_gamma; - */ -#elif defined(sgi) - LUT_exponent = 1.0 / 1.7; - /* there doesn't seem to be any documented function to - * get the "gamma" value, so we do it the hard way */ - infile = fopen("/etc/config/system.glGammaVal", "r"); - if (infile) { - double sgi_gamma; - - fgets(tmpline, 80, infile); - fclose(infile); - sgi_gamma = atof(tmpline); - if (sgi_gamma > 0.0) - LUT_exponent = 1.0 / sgi_gamma; - } -#elif defined(Macintosh) - LUT_exponent = 1.8 / 2.61; - /* - if (some_mac_function_that_returns_gamma(&mac_gamma)) - LUT_exponent = mac_gamma / 2.61; - */ -#else - LUT_exponent = 1.0; /* assume no LUT: most PCs */ -#endif - - /* the defaults above give 1.0, 1.3, 1.5 and 2.2, respectively: */ - default_display_exponent = LUT_exponent * CRT_exponent; - - - /* If the user has set the SCREEN_GAMMA environment variable as suggested - * (somewhat imprecisely) in the libpng documentation, use that; otherwise - * use the default value we just calculated. Either way, the user may - * override this via a command-line option. */ - - if ((p = getenv("SCREEN_GAMMA")) != NULL) - rpng2_info.display_exponent = atof(p); - else - rpng2_info.display_exponent = default_display_exponent; - - - /* Now parse the command line for options and the PNG filename. */ - - while (*++argv && !error) { - if (!strncmp(*argv, "-display", 2)) { - if (!*++argv) - ++error; - else - displayname = *argv; - } else if (!strncmp(*argv, "-gamma", 2)) { - if (!*++argv) - ++error; - else { - rpng2_info.display_exponent = atof(*argv); - if (rpng2_info.display_exponent <= 0.0) - ++error; - } - } else if (!strncmp(*argv, "-bgcolor", 4)) { - if (!*++argv) - ++error; - else { - bgstr = *argv; - if (strlen(bgstr) != 7 || bgstr[0] != '#') - ++error; - else { - have_bg = TRUE; - bg_image = FALSE; - } - } - } else if (!strncmp(*argv, "-bgpat", 4)) { - if (!*++argv) - ++error; - else { - pat = atoi(*argv); - if (pat >= 0 && pat < num_bgpat) { - bg_image = TRUE; - have_bg = FALSE; - } else - ++error; - } - } else if (!strncmp(*argv, "-usleep", 2)) { - if (!*++argv) - ++error; - else { - usleep_duration = (ulg)atol(*argv); - demo_timing = TRUE; - } - } else if (!strncmp(*argv, "-pause", 2)) { - pause_after_pass = TRUE; - } else if (!strncmp(*argv, "-timing", 2)) { - timing = TRUE; -#ifdef FEATURE_LOOP - } else if (!strncmp(*argv, "-loop", 2)) { - loop = TRUE; - if (!argv[1] || !is_number(argv[1])) - loop_interval = 2; - else { - ++argv; - loop_interval = atol(*argv); - if (loop_interval < 0) - loop_interval = 2; - else if (loop_interval > 100000) /* bit more than one day */ - loop_interval = 100000; - } -#endif - } else { - if (**argv != '-') { - filename = *argv; - if (argv[1]) /* shouldn't be any more args after filename */ - ++error; - } else - ++error; /* not expecting any other options */ - } - } - - if (!filename) - ++error; - - - /* print usage screen if any errors up to this point */ - - if (error) { - fprintf(stderr, "\n%s %s: %s\n\n", PROGNAME, VERSION, appname); - readpng2_version_info(); - fprintf(stderr, "\n" - "Usage: "); - fprintf(stderr, - "%s [-display xdpy] [-gamma exp] [-bgcolor bg | -bgpat pat]\n" - " %*s [-usleep dur | -timing] [-pause]\n", - PROGNAME, (int)strlen(PROGNAME), " "); - fprintf(stderr, -#ifdef FEATURE_LOOP - " [-loop [sec]]" -#endif - " file.png\n\n"); - fprintf(stderr, - " xdpy\tname of the target X display (e.g., ``hostname:0'')\n" - " exp \ttransfer-function exponent (``gamma'') of the display\n" - "\t\t system in floating-point format (e.g., ``%.1f''); equal\n" - "\t\t to the product of the lookup-table exponent (varies)\n", - default_display_exponent); - fprintf(stderr, - "\t\t and the CRT exponent (usually 2.2); must be positive\n" - " bg \tdesired background color in 7-character hex RGB format\n" - "\t\t (e.g., ``#ff7700'' for orange: same as HTML colors);\n" - "\t\t used with transparent images; overrides -bgpat\n" - " pat \tdesired background pattern number (0-%d); used with\n" - "\t\t transparent images; overrides -bgcolor\n", - num_bgpat-1); -#ifdef FEATURE_LOOP - fprintf(stderr, - " -loop\tloops through background images after initial display\n" - "\t\t is complete (depends on -bgpat)\n" - " sec \tseconds to display each background image (default = 2)\n"); -#endif - fprintf(stderr, - " dur \tduration in microseconds to wait after displaying each\n" - "\t\t row (for demo purposes)\n" - " -timing\tenables delay for every block read, to simulate modem\n" - "\t\t download of image (~36 Kbps)\n" - " -pause\tpauses after displaying each pass until mouse clicked\n" - "\nPress Q, Esc or mouse button 1 (within image window, after image\n" - "is displayed) to quit.\n"); - exit(1); - } - - if (!(infile = fopen(filename, "rb"))) { - fprintf(stderr, PROGNAME ": can't open PNG file [%s]\n", filename); - ++error; - } else { - incount = fread(inbuf, 1, INBUFSIZE, infile); - if (incount < 8 || !readpng2_check_sig(inbuf, 8)) { - fprintf(stderr, PROGNAME - ": [%s] is not a PNG file: incorrect signature\n", - filename); - ++error; - } else if ((rc = readpng2_init(&rpng2_info)) != 0) { - switch (rc) { - case 2: - fprintf(stderr, PROGNAME - ": [%s] has bad IHDR (libpng longjmp)\n", filename); - break; - case 4: - fprintf(stderr, PROGNAME ": insufficient memory\n"); - break; - default: - fprintf(stderr, PROGNAME - ": unknown readpng2_init() error\n"); - break; - } - ++error; - } else { - Trace((stderr, "about to call XOpenDisplay()\n")) - display = XOpenDisplay(displayname); - if (!display) { - readpng2_cleanup(&rpng2_info); - fprintf(stderr, PROGNAME ": can't open X display [%s]\n", - displayname? displayname : "default"); - ++error; - } - } - if (error) - fclose(infile); - } - - - if (error) { - fprintf(stderr, PROGNAME ": aborting.\n"); - exit(2); - } - - - /* set the title-bar string, but make sure buffer doesn't overflow */ - - alen = strlen(appname); - flen = strlen(filename); - if (alen + flen + 3 > 1023) - sprintf(titlebar, "%s: ...%s", appname, filename+(alen+flen+6-1023)); - else - sprintf(titlebar, "%s: %s", appname, filename); - - - /* set some final rpng2_info variables before entering main data loop */ - - if (have_bg) { - unsigned r, g, b; /* this approach quiets compiler warnings */ - - sscanf(bgstr+1, "%2x%2x%2x", &r, &g, &b); - rpng2_info.bg_red = (uch)r; - rpng2_info.bg_green = (uch)g; - rpng2_info.bg_blue = (uch)b; - } else - rpng2_info.need_bgcolor = TRUE; - - rpng2_info.state = kPreInit; - rpng2_info.mainprog_init = rpng2_x_init; - rpng2_info.mainprog_display_row = rpng2_x_display_row; - rpng2_info.mainprog_finish_display = rpng2_x_finish_display; - - - /* OK, this is the fun part: call readpng2_decode_data() at the start of - * the loop to deal with our first buffer of data (read in above to verify - * that the file is a PNG image), then loop through the file and continue - * calling the same routine to handle each chunk of data. It in turn - * passes the data to libpng, which will invoke one or more of our call- - * backs as decoded data become available. We optionally call sleep() for - * one second per iteration to simulate downloading the image via an analog - * modem. */ - - for (;;) { - Trace((stderr, "about to call readpng2_decode_data()\n")) - if (readpng2_decode_data(&rpng2_info, inbuf, incount)) - ++error; - Trace((stderr, "done with readpng2_decode_data()\n")) - - if (error || incount != INBUFSIZE || rpng2_info.state == kDone) { - if (rpng2_info.state == kDone) { - Trace((stderr, "done decoding PNG image\n")) - } else if (ferror(infile)) { - fprintf(stderr, PROGNAME - ": error while reading PNG image file\n"); - exit(3); - } else if (feof(infile)) { - fprintf(stderr, PROGNAME ": end of file reached " - "(unexpectedly) while reading PNG image file\n"); - exit(3); - } else /* if (error) */ { - /* will print error message below */ - } - break; - } - - if (timing) - sleep(1); - - incount = fread(inbuf, 1, INBUFSIZE, infile); - } - - - /* clean up PNG stuff and report any decoding errors */ - - fclose(infile); - Trace((stderr, "about to call readpng2_cleanup()\n")) - readpng2_cleanup(&rpng2_info); - - if (error) { - fprintf(stderr, PROGNAME ": libpng error while decoding PNG image\n"); - exit(3); - } - - -#ifdef FEATURE_LOOP - - if (loop && bg_image) { - Trace((stderr, "entering -loop loop (FEATURE_LOOP)\n")) - for (;;) { - int i, use_sleep; - struct timeval now, then; - - /* get current time and add loop_interval to get target time */ - if (gettimeofday(&then, NULL) == 0) { - then.tv_sec += loop_interval; - use_sleep = FALSE; - } else - use_sleep = TRUE; - - /* do quick check for a quit event but don't wait for it */ - /* GRR BUG: should also check for Expose events and redraw... */ - if (XCheckMaskEvent(display, KeyPressMask | ButtonPressMask, &e)) - if (QUIT(e,k)) - break; - - /* generate next background image */ - if (++pat >= num_bgpat) - pat = 0; - rpng2_x_reload_bg_image(); - - /* wait for timeout, using whatever means are available */ - if (use_sleep || gettimeofday(&now, NULL) != 0) { - for (i = loop_interval; i > 0; --i) { - sleep(1); - /* GRR BUG: also need to check for Expose (and redraw!) */ - if (XCheckMaskEvent(display, KeyPressMask | ButtonPressMask, - &e) && QUIT(e,k)) - break; - } - } else { - /* Y2038 BUG! */ - if (now.tv_sec < then.tv_sec || - (now.tv_sec == then.tv_sec && now.tv_usec < then.tv_usec)) - { - int quit = FALSE; - long seconds_to_go = then.tv_sec - now.tv_sec; - long usleep_usec; - - /* basically chew up most of remaining loop-interval with - * calls to sleep(1) interleaved with checks for quit - * events, but also recalc time-to-go periodically; when - * done, clean up any remaining time with usleep() call - * (could also use SIGALRM, but signals are a pain...) */ - while (seconds_to_go-- > 1) { - int seconds_done = 0; - - for (i = seconds_to_go; i > 0 && !quit; --i) { - sleep(1); - /* GRR BUG: need to check for Expose and redraw */ - if (XCheckMaskEvent(display, KeyPressMask | - ButtonPressMask, &e) && QUIT(e,k)) - quit = TRUE; - if (++seconds_done > 1000) - break; /* time to redo seconds_to_go meas. */ - } - if (quit) - break; - - /* OK, more than 1000 seconds since last check: - * correct the time-to-go measurement for drift */ - if (gettimeofday(&now, NULL) == 0) { - if (now.tv_sec >= then.tv_sec) - break; - seconds_to_go = then.tv_sec - now.tv_sec; - } else - ++seconds_to_go; /* restore what we subtracted */ - } - if (quit) - break; /* breaks outer do-loop, skips redisplay */ - - /* since difference between "now" and "then" is already - * eaten up to within a couple of seconds, don't need to - * worry about overflow--but might have overshot (neg.) */ - if (gettimeofday(&now, NULL) == 0) { - usleep_usec = 1000000L*(then.tv_sec - now.tv_sec) + - then.tv_usec - now.tv_usec; - if (usleep_usec > 0) - usleep((ulg)usleep_usec); - } - } - } - - /* composite image against new background and display (note that - * we do not take into account the time spent doing this...) */ - rpng2_x_redisplay_image (0, 0, rpng2_info.width, rpng2_info.height); - } - - } else /* FALL THROUGH and do the normal thing */ - -#endif /* FEATURE_LOOP */ - - /* wait for the user to tell us when to quit */ - - if (rpng2_info.state >= kWindowInit) { - Trace((stderr, "entering final wait-for-quit-event loop\n")) - do { - XNextEvent(display, &e); - if (e.type == Expose) { - XExposeEvent *ex = (XExposeEvent *)&e; - rpng2_x_redisplay_image (ex->x, ex->y, ex->width, ex->height); - } - } while (!QUIT(e,k)); - } else { - fprintf(stderr, PROGNAME ": init callback never called: probable " - "libpng error while decoding PNG metadata\n"); - exit(4); - } - - - /* we're done: clean up all image and X resources and go away */ - - Trace((stderr, "about to call rpng2_x_cleanup()\n")) - rpng2_x_cleanup(); - - (void)argc; /* Unused */ - - return 0; -} - - - - - -/* this function is called by readpng2_info_callback() in readpng2.c, which - * in turn is called by libpng after all of the pre-IDAT chunks have been - * read and processed--i.e., we now have enough info to finish initializing */ - -static void rpng2_x_init(void) -{ - ulg i; - ulg rowbytes = rpng2_info.rowbytes; - - Trace((stderr, "beginning rpng2_x_init()\n")) - Trace((stderr, " rowbytes = %d\n", rpng2_info.rowbytes)) - Trace((stderr, " width = %ld\n", rpng2_info.width)) - Trace((stderr, " height = %ld\n", rpng2_info.height)) - - /* Guard against integer overflow */ - if (rpng2_info.height > ((size_t)(-1))/rpng2_info.rowbytes) { - fprintf(stderr, PROGNAME ": image_data buffer would be too large\n"); - readpng2_cleanup(&rpng2_info); - return; - } - - rpng2_info.image_data = (uch *)malloc(rowbytes * rpng2_info.height); - if (!rpng2_info.image_data) { - readpng2_cleanup(&rpng2_info); - return; - } - - rpng2_info.row_pointers = (uch **)malloc(rpng2_info.height * sizeof(uch *)); - if (!rpng2_info.row_pointers) { - free(rpng2_info.image_data); - rpng2_info.image_data = NULL; - readpng2_cleanup(&rpng2_info); - return; - } - - for (i = 0; i < rpng2_info.height; ++i) - rpng2_info.row_pointers[i] = rpng2_info.image_data + i*rowbytes; - - - /* do the basic X initialization stuff, make the window, and fill it with - * the user-specified, file-specified or default background color or - * pattern */ - - if (rpng2_x_create_window()) { - - /* GRR TEMPORARY HACK: this is fundamentally no different from cases - * above; libpng should call our error handler to longjmp() back to us - * when png_ptr goes away. If we/it segfault instead, seems like a - * libpng bug... */ - - /* we're here via libpng callback, so if window fails, clean and bail */ - readpng2_cleanup(&rpng2_info); - rpng2_x_cleanup(); - exit(2); - } - - rpng2_info.state = kWindowInit; -} - - - - - -static int rpng2_x_create_window(void) -{ - ulg bg_red = rpng2_info.bg_red; - ulg bg_green = rpng2_info.bg_green; - ulg bg_blue = rpng2_info.bg_blue; - ulg bg_pixel = 0L; - ulg attrmask; - int need_colormap = FALSE; - int screen, pad; - uch *xdata; - Window root; - XEvent e; - XGCValues gcvalues; - XSetWindowAttributes attr; - XTextProperty windowName, *pWindowName = &windowName; - XTextProperty iconName, *pIconName = &iconName; - XVisualInfo visual_info; - XSizeHints *size_hints; - XWMHints *wm_hints; - XClassHint *class_hints; - - - Trace((stderr, "beginning rpng2_x_create_window()\n")) - - screen = DefaultScreen(display); - depth = DisplayPlanes(display, screen); - root = RootWindow(display, screen); - -#ifdef DEBUG - XSynchronize(display, True); -#endif - - if (depth != 16 && depth != 24 && depth != 32) { - int visuals_matched = 0; - - Trace((stderr, "default depth is %d: checking other visuals\n", - depth)) - - /* 24-bit first */ - visual_info.screen = screen; - visual_info.depth = 24; - visual_list = XGetVisualInfo(display, - VisualScreenMask | VisualDepthMask, &visual_info, &visuals_matched); - if (visuals_matched == 0) { -/* GRR: add 15-, 16- and 32-bit TrueColor visuals (also DirectColor?) */ - fprintf(stderr, "default screen depth %d not supported, and no" - " 24-bit visuals found\n", depth); - return 2; - } - Trace((stderr, "XGetVisualInfo() returned %d 24-bit visuals\n", - visuals_matched)) - visual = visual_list[0].visual; - depth = visual_list[0].depth; -/* - colormap_size = visual_list[0].colormap_size; - visual_class = visual->class; - visualID = XVisualIDFromVisual(visual); - */ - have_nondefault_visual = TRUE; - need_colormap = TRUE; - } else { - XMatchVisualInfo(display, screen, depth, TrueColor, &visual_info); - visual = visual_info.visual; - } - - RMask = visual->red_mask; - GMask = visual->green_mask; - BMask = visual->blue_mask; - -/* GRR: add/check 8-bit support */ - if (depth == 8 || need_colormap) { - colormap = XCreateColormap(display, root, visual, AllocNone); - if (!colormap) { - fprintf(stderr, "XCreateColormap() failed\n"); - return 2; - } - have_colormap = TRUE; - if (depth == 8) - bg_image = FALSE; /* gradient just wastes palette entries */ - } - if (depth == 15 || depth == 16) { - RShift = 15 - rpng2_x_msb(RMask); /* these are right-shifts */ - GShift = 15 - rpng2_x_msb(GMask); - BShift = 15 - rpng2_x_msb(BMask); - } else if (depth > 16) { - RShift = rpng2_x_msb(RMask) - 7; /* these are left-shifts */ - GShift = rpng2_x_msb(GMask) - 7; - BShift = rpng2_x_msb(BMask) - 7; - } - if (depth >= 15 && (RShift < 0 || GShift < 0 || BShift < 0)) { - fprintf(stderr, "rpng2 internal logic error: negative X shift(s)!\n"); - return 2; - } - -/*--------------------------------------------------------------------------- - Finally, create the window. - ---------------------------------------------------------------------------*/ - - attr.backing_store = Always; - attr.event_mask = ExposureMask | KeyPressMask | ButtonPressMask; - attrmask = CWBackingStore | CWEventMask; - if (have_nondefault_visual) { - attr.colormap = colormap; - attr.background_pixel = 0; - attr.border_pixel = 1; - attrmask |= CWColormap | CWBackPixel | CWBorderPixel; - } - - window = XCreateWindow(display, root, 0, 0, rpng2_info.width, - rpng2_info.height, 0, depth, InputOutput, visual, attrmask, &attr); - - if (window == None) { - fprintf(stderr, "XCreateWindow() failed\n"); - return 2; - } else - have_window = TRUE; - - if (depth == 8) - XSetWindowColormap(display, window, colormap); - - if (!XStringListToTextProperty(&window_name, 1, pWindowName)) - pWindowName = NULL; - if (!XStringListToTextProperty(&icon_name, 1, pIconName)) - pIconName = NULL; - - /* OK if either hints allocation fails; XSetWMProperties() allows NULLs */ - - if ((size_hints = XAllocSizeHints()) != NULL) { - /* window will not be resizable */ - size_hints->flags = PMinSize | PMaxSize; - size_hints->min_width = size_hints->max_width = (int)rpng2_info.width; - size_hints->min_height = size_hints->max_height = - (int)rpng2_info.height; - } - - if ((wm_hints = XAllocWMHints()) != NULL) { - wm_hints->initial_state = NormalState; - wm_hints->input = True; - /* wm_hints->icon_pixmap = icon_pixmap; */ - wm_hints->flags = StateHint | InputHint /* | IconPixmapHint */ ; - } - - if ((class_hints = XAllocClassHint()) != NULL) { - class_hints->res_name = res_name; - class_hints->res_class = res_class; - } - - XSetWMProperties(display, window, pWindowName, pIconName, NULL, 0, - size_hints, wm_hints, class_hints); - - /* various properties and hints no longer needed; free memory */ - if (pWindowName) - XFree(pWindowName->value); - if (pIconName) - XFree(pIconName->value); - if (size_hints) - XFree(size_hints); - if (wm_hints) - XFree(wm_hints); - if (class_hints) - XFree(class_hints); - - XMapWindow(display, window); - - gc = XCreateGC(display, window, 0, &gcvalues); - have_gc = TRUE; - -/*--------------------------------------------------------------------------- - Allocate memory for the X- and display-specific version of the image. - ---------------------------------------------------------------------------*/ - - if (depth == 24 || depth == 32) { - xdata = (uch *)malloc(4*rpng2_info.width*rpng2_info.height); - pad = 32; - } else if (depth == 16) { - xdata = (uch *)malloc(2*rpng2_info.width*rpng2_info.height); - pad = 16; - } else /* depth == 8 */ { - xdata = (uch *)malloc(rpng2_info.width*rpng2_info.height); - pad = 8; - } - - if (!xdata) { - fprintf(stderr, PROGNAME ": unable to allocate image memory\n"); - return 4; - } - - ximage = XCreateImage(display, visual, depth, ZPixmap, 0, - (char *)xdata, rpng2_info.width, rpng2_info.height, pad, 0); - - if (!ximage) { - fprintf(stderr, PROGNAME ": XCreateImage() failed\n"); - free(xdata); - return 3; - } - - /* to avoid testing the byte order every pixel (or doubling the size of - * the drawing routine with a giant if-test), we arbitrarily set the byte - * order to MSBFirst and let Xlib worry about inverting things on little- - * endian machines (e.g., Linux/x86, old VAXen, etc.)--this is not the - * most efficient approach (the giant if-test would be better), but in - * the interest of clarity, we'll take the easy way out... */ - - ximage->byte_order = MSBFirst; - -/*--------------------------------------------------------------------------- - Fill window with the specified background color (default is black) or - faked "background image" (but latter is disabled if 8-bit; gradients - just waste palette entries). - ---------------------------------------------------------------------------*/ - - if (bg_image) - rpng2_x_load_bg_image(); /* resets bg_image if fails */ - - if (!bg_image) { - if (depth == 24 || depth == 32) { - bg_pixel = (bg_red << RShift) | - (bg_green << GShift) | - (bg_blue << BShift); - } else if (depth == 16) { - bg_pixel = (((bg_red << 8) >> RShift) & RMask) | - (((bg_green << 8) >> GShift) & GMask) | - (((bg_blue << 8) >> BShift) & BMask); - } else /* depth == 8 */ { - - /* GRR: add 8-bit support */ - - } - XSetForeground(display, gc, bg_pixel); - XFillRectangle(display, window, gc, 0, 0, rpng2_info.width, - rpng2_info.height); - } - -/*--------------------------------------------------------------------------- - Wait for first Expose event to do any drawing, then flush and return. - ---------------------------------------------------------------------------*/ - - do - XNextEvent(display, &e); - while (e.type != Expose || e.xexpose.count); - - XFlush(display); - - return 0; - -} /* end function rpng2_x_create_window() */ - - - - - -static int rpng2_x_load_bg_image(void) -{ - uch *src; - char *dest; - uch r1, r2, g1, g2, b1, b2; - uch r1_inv, r2_inv, g1_inv, g2_inv, b1_inv, b2_inv; - int k, hmax, max; - int xidx, yidx, yidx_max; - int even_odd_vert, even_odd_horiz, even_odd; - int invert_gradient2 = (bg[pat].type & 0x08); - int invert_column; - int ximage_rowbytes = ximage->bytes_per_line; - ulg i, row; - ulg pixel; - -/*--------------------------------------------------------------------------- - Allocate buffer for fake background image to be used with transparent - images; if this fails, revert to plain background color. - ---------------------------------------------------------------------------*/ - - bg_rowbytes = 3 * rpng2_info.width; - bg_data = (uch *)malloc(bg_rowbytes * rpng2_info.height); - if (!bg_data) { - fprintf(stderr, PROGNAME - ": unable to allocate memory for background image\n"); - bg_image = 0; - return 1; - } - - bgscale = (pat == 0)? 8 : bgscale_default; - yidx_max = bgscale - 1; - -/*--------------------------------------------------------------------------- - Vertical gradients (ramps) in NxN squares, alternating direction and - colors (N == bgscale). - ---------------------------------------------------------------------------*/ - - if ((bg[pat].type & 0x07) == 0) { - uch r1_min = rgb[bg[pat].rgb1_min].r; - uch g1_min = rgb[bg[pat].rgb1_min].g; - uch b1_min = rgb[bg[pat].rgb1_min].b; - uch r2_min = rgb[bg[pat].rgb2_min].r; - uch g2_min = rgb[bg[pat].rgb2_min].g; - uch b2_min = rgb[bg[pat].rgb2_min].b; - int r1_diff = rgb[bg[pat].rgb1_max].r - r1_min; - int g1_diff = rgb[bg[pat].rgb1_max].g - g1_min; - int b1_diff = rgb[bg[pat].rgb1_max].b - b1_min; - int r2_diff = rgb[bg[pat].rgb2_max].r - r2_min; - int g2_diff = rgb[bg[pat].rgb2_max].g - g2_min; - int b2_diff = rgb[bg[pat].rgb2_max].b - b2_min; - - for (row = 0; row < rpng2_info.height; ++row) { - yidx = (int)(row % bgscale); - even_odd_vert = (int)((row / bgscale) & 1); - - r1 = r1_min + (r1_diff * yidx) / yidx_max; - g1 = g1_min + (g1_diff * yidx) / yidx_max; - b1 = b1_min + (b1_diff * yidx) / yidx_max; - r1_inv = r1_min + (r1_diff * (yidx_max-yidx)) / yidx_max; - g1_inv = g1_min + (g1_diff * (yidx_max-yidx)) / yidx_max; - b1_inv = b1_min + (b1_diff * (yidx_max-yidx)) / yidx_max; - - r2 = r2_min + (r2_diff * yidx) / yidx_max; - g2 = g2_min + (g2_diff * yidx) / yidx_max; - b2 = b2_min + (b2_diff * yidx) / yidx_max; - r2_inv = r2_min + (r2_diff * (yidx_max-yidx)) / yidx_max; - g2_inv = g2_min + (g2_diff * (yidx_max-yidx)) / yidx_max; - b2_inv = b2_min + (b2_diff * (yidx_max-yidx)) / yidx_max; - - dest = (char *)bg_data + row*bg_rowbytes; - for (i = 0; i < rpng2_info.width; ++i) { - even_odd_horiz = (int)((i / bgscale) & 1); - even_odd = even_odd_vert ^ even_odd_horiz; - invert_column = - (even_odd_horiz && (bg[pat].type & 0x10)); - if (even_odd == 0) { /* gradient #1 */ - if (invert_column) { - *dest++ = r1_inv; - *dest++ = g1_inv; - *dest++ = b1_inv; - } else { - *dest++ = r1; - *dest++ = g1; - *dest++ = b1; - } - } else { /* gradient #2 */ - if ((invert_column && invert_gradient2) || - (!invert_column && !invert_gradient2)) - { - *dest++ = r2; /* not inverted or */ - *dest++ = g2; /* doubly inverted */ - *dest++ = b2; - } else { - *dest++ = r2_inv; - *dest++ = g2_inv; /* singly inverted */ - *dest++ = b2_inv; - } - } - } - } - -/*--------------------------------------------------------------------------- - Soft gradient-diamonds with scale = bgscale. Code contributed by Adam - M. Costello. - ---------------------------------------------------------------------------*/ - - } else if ((bg[pat].type & 0x07) == 1) { - - hmax = (bgscale-1)/2; /* half the max weight of a color */ - max = 2*hmax; /* the max weight of a color */ - - r1 = rgb[bg[pat].rgb1_max].r; - g1 = rgb[bg[pat].rgb1_max].g; - b1 = rgb[bg[pat].rgb1_max].b; - r2 = rgb[bg[pat].rgb2_max].r; - g2 = rgb[bg[pat].rgb2_max].g; - b2 = rgb[bg[pat].rgb2_max].b; - - for (row = 0; row < rpng2_info.height; ++row) { - yidx = (int)(row % bgscale); - if (yidx > hmax) - yidx = bgscale-1 - yidx; - dest = (char *)bg_data + row*bg_rowbytes; - for (i = 0; i < rpng2_info.width; ++i) { - xidx = (int)(i % bgscale); - if (xidx > hmax) - xidx = bgscale-1 - xidx; - k = xidx + yidx; - *dest++ = (k*r1 + (max-k)*r2) / max; - *dest++ = (k*g1 + (max-k)*g2) / max; - *dest++ = (k*b1 + (max-k)*b2) / max; - } - } - -/*--------------------------------------------------------------------------- - Radial "starburst" with azimuthal sinusoids; [eventually number of sinu- - soids will equal bgscale?]. This one is slow but very cool. Code con- - tributed by Pieter S. van der Meulen (originally in Smalltalk). - ---------------------------------------------------------------------------*/ - - } else if ((bg[pat].type & 0x07) == 2) { - uch ch; - int ii, x, y, hw, hh, grayspot; - double freq, rotate, saturate, gray, intensity; - double angle=0.0, aoffset=0.0, maxDist, dist; - double red=0.0, green=0.0, blue=0.0, hue, s, v, f, p, q, t; - - fprintf(stderr, "%s: computing radial background...", - PROGNAME); - fflush(stderr); - - hh = (int)(rpng2_info.height / 2); - hw = (int)(rpng2_info.width / 2); - - /* variables for radial waves: - * aoffset: number of degrees to rotate hue [CURRENTLY NOT USED] - * freq: number of color beams originating from the center - * grayspot: size of the graying center area (anti-alias) - * rotate: rotation of the beams as a function of radius - * saturate: saturation of beams' shape azimuthally - */ - angle = CLIP(angle, 0.0, 360.0); - grayspot = CLIP(bg[pat].bg_gray, 1, (hh + hw)); - freq = MAX((double)bg[pat].bg_freq, 0.0); - saturate = (double)bg[pat].bg_bsat * 0.1; - rotate = (double)bg[pat].bg_brot * 0.1; - gray = 0.0; - intensity = 0.0; - maxDist = (double)((hw*hw) + (hh*hh)); - - for (row = 0; row < rpng2_info.height; ++row) { - y = (int)(row - hh); - dest = (char *)bg_data + row*bg_rowbytes; - for (i = 0; i < rpng2_info.width; ++i) { - x = (int)(i - hw); - angle = (x == 0)? PI_2 : atan((double)y / (double)x); - gray = (double)MAX(ABS(y), ABS(x)) / grayspot; - gray = MIN(1.0, gray); - dist = (double)((x*x) + (y*y)) / maxDist; - intensity = cos((angle+(rotate*dist*PI)) * freq) * - gray * saturate; - intensity = (MAX(MIN(intensity,1.0),-1.0) + 1.0) * 0.5; - hue = (angle + PI) * INV_PI_360 + aoffset; - s = gray * ((double)(ABS(x)+ABS(y)) / (double)(hw + hh)); - s = MIN(MAX(s,0.0), 1.0); - v = MIN(MAX(intensity,0.0), 1.0); - - if (s == 0.0) { - ch = (uch)(v * 255.0); - *dest++ = ch; - *dest++ = ch; - *dest++ = ch; - } else { - if ((hue < 0.0) || (hue >= 360.0)) - hue -= (((int)(hue / 360.0)) * 360.0); - hue /= 60.0; - ii = (int)hue; - f = hue - (double)ii; - p = (1.0 - s) * v; - q = (1.0 - (s * f)) * v; - t = (1.0 - (s * (1.0 - f))) * v; - if (ii == 0) { red = v; green = t; blue = p; } - else if (ii == 1) { red = q; green = v; blue = p; } - else if (ii == 2) { red = p; green = v; blue = t; } - else if (ii == 3) { red = p; green = q; blue = v; } - else if (ii == 4) { red = t; green = p; blue = v; } - else if (ii == 5) { red = v; green = p; blue = q; } - *dest++ = (uch)(red * 255.0); - *dest++ = (uch)(green * 255.0); - *dest++ = (uch)(blue * 255.0); - } - } - } - fprintf(stderr, "done.\n"); - fflush(stderr); - } - -/*--------------------------------------------------------------------------- - Blast background image to display buffer before beginning PNG decode. - ---------------------------------------------------------------------------*/ - - if (depth == 24 || depth == 32) { - ulg red, green, blue; - int bpp = ximage->bits_per_pixel; - - for (row = 0; row < rpng2_info.height; ++row) { - src = bg_data + row*bg_rowbytes; - dest = ximage->data + row*ximage_rowbytes; - if (bpp == 32) { /* slightly optimized version */ - for (i = rpng2_info.width; i > 0; --i) { - red = *src++; - green = *src++; - blue = *src++; - pixel = (red << RShift) | - (green << GShift) | - (blue << BShift); - /* recall that we set ximage->byte_order = MSBFirst above */ - *dest++ = (char)((pixel >> 24) & 0xff); - *dest++ = (char)((pixel >> 16) & 0xff); - *dest++ = (char)((pixel >> 8) & 0xff); - *dest++ = (char)( pixel & 0xff); - } - } else { - for (i = rpng2_info.width; i > 0; --i) { - red = *src++; - green = *src++; - blue = *src++; - pixel = (red << RShift) | - (green << GShift) | - (blue << BShift); - /* recall that we set ximage->byte_order = MSBFirst above */ - /* GRR BUG? this assumes bpp == 24 & bits are packed low */ - /* (probably need to use RShift, RMask, etc.) */ - *dest++ = (char)((pixel >> 16) & 0xff); - *dest++ = (char)((pixel >> 8) & 0xff); - *dest++ = (char)( pixel & 0xff); - } - } - } - - } else if (depth == 16) { - ush red, green, blue; - - for (row = 0; row < rpng2_info.height; ++row) { - src = bg_data + row*bg_rowbytes; - dest = ximage->data + row*ximage_rowbytes; - for (i = rpng2_info.width; i > 0; --i) { - red = ((ush)(*src) << 8); ++src; - green = ((ush)(*src) << 8); ++src; - blue = ((ush)(*src) << 8); ++src; - pixel = ((red >> RShift) & RMask) | - ((green >> GShift) & GMask) | - ((blue >> BShift) & BMask); - /* recall that we set ximage->byte_order = MSBFirst above */ - *dest++ = (char)((pixel >> 8) & 0xff); - *dest++ = (char)( pixel & 0xff); - } - } - - } else /* depth == 8 */ { - - /* GRR: add 8-bit support */ - - } - - XPutImage(display, window, gc, ximage, 0, 0, 0, 0, rpng2_info.width, - rpng2_info.height); - - return 0; - -} /* end function rpng2_x_load_bg_image() */ - - - - - -static void rpng2_x_display_row(ulg row) -{ - uch bg_red = rpng2_info.bg_red; - uch bg_green = rpng2_info.bg_green; - uch bg_blue = rpng2_info.bg_blue; - uch *src, *src2=NULL; - char *dest; - uch r, g, b, a; - int ximage_rowbytes = ximage->bytes_per_line; - ulg i, pixel; - static int rows=0, prevpass=(-1); - static ulg firstrow; - -/*--------------------------------------------------------------------------- - rows and firstrow simply track how many rows (and which ones) have not - yet been displayed; alternatively, we could call XPutImage() for every - row and not bother with the records-keeping. - ---------------------------------------------------------------------------*/ - - Trace((stderr, "beginning rpng2_x_display_row()\n")) - - if (rpng2_info.pass != prevpass) { - if (pause_after_pass && rpng2_info.pass > 0) { - XEvent e; - KeySym k; - - fprintf(stderr, - "%s: end of pass %d of 7; click in image window to continue\n", - PROGNAME, prevpass + 1); - do - XNextEvent(display, &e); - while (!QUIT(e,k)); - } - fprintf(stderr, "%s: pass %d of 7\r", PROGNAME, rpng2_info.pass + 1); - fflush(stderr); - prevpass = rpng2_info.pass; - } - - if (rows == 0) - firstrow = row; /* first row that is not yet displayed */ - - ++rows; /* count of rows received but not yet displayed */ - -/*--------------------------------------------------------------------------- - Aside from the use of the rpng2_info struct, the lack of an outer loop - (over rows) and moving the XPutImage() call outside the "if (depth)" - tests, this routine is identical to rpng_x_display_image() in the non- - progressive version of the program. - ---------------------------------------------------------------------------*/ - - if (depth == 24 || depth == 32) { - ulg red, green, blue; - int bpp = ximage->bits_per_pixel; - - src = rpng2_info.image_data + row*rpng2_info.rowbytes; - if (bg_image) - src2 = bg_data + row*bg_rowbytes; - dest = ximage->data + row*ximage_rowbytes; - if (rpng2_info.channels == 3) { - for (i = rpng2_info.width; i > 0; --i) { - red = *src++; - green = *src++; - blue = *src++; - pixel = (red << RShift) | - (green << GShift) | - (blue << BShift); - /* recall that we set ximage->byte_order = MSBFirst above */ - if (bpp == 32) { - *dest++ = (char)((pixel >> 24) & 0xff); - *dest++ = (char)((pixel >> 16) & 0xff); - *dest++ = (char)((pixel >> 8) & 0xff); - *dest++ = (char)( pixel & 0xff); - } else { - /* GRR BUG? this assumes bpp == 24 & bits are packed low */ - /* (probably need to use RShift, RMask, etc.) */ - *dest++ = (char)((pixel >> 16) & 0xff); - *dest++ = (char)((pixel >> 8) & 0xff); - *dest++ = (char)( pixel & 0xff); - } - } - } else /* if (rpng2_info.channels == 4) */ { - for (i = rpng2_info.width; i > 0; --i) { - r = *src++; - g = *src++; - b = *src++; - a = *src++; - if (bg_image) { - bg_red = *src2++; - bg_green = *src2++; - bg_blue = *src2++; - } - if (a == 255) { - red = r; - green = g; - blue = b; - } else if (a == 0) { - red = bg_red; - green = bg_green; - blue = bg_blue; - } else { - /* this macro (from png.h) composites the foreground - * and background values and puts the result into the - * first argument */ - alpha_composite(red, r, a, bg_red); - alpha_composite(green, g, a, bg_green); - alpha_composite(blue, b, a, bg_blue); - } - pixel = (red << RShift) | - (green << GShift) | - (blue << BShift); - /* recall that we set ximage->byte_order = MSBFirst above */ - if (bpp == 32) { - *dest++ = (char)((pixel >> 24) & 0xff); - *dest++ = (char)((pixel >> 16) & 0xff); - *dest++ = (char)((pixel >> 8) & 0xff); - *dest++ = (char)( pixel & 0xff); - } else { - /* GRR BUG? this assumes bpp == 24 & bits are packed low */ - /* (probably need to use RShift, RMask, etc.) */ - *dest++ = (char)((pixel >> 16) & 0xff); - *dest++ = (char)((pixel >> 8) & 0xff); - *dest++ = (char)( pixel & 0xff); - } - } - } - - } else if (depth == 16) { - ush red, green, blue; - - src = rpng2_info.row_pointers[row]; - if (bg_image) - src2 = bg_data + row*bg_rowbytes; - dest = ximage->data + row*ximage_rowbytes; - if (rpng2_info.channels == 3) { - for (i = rpng2_info.width; i > 0; --i) { - red = ((ush)(*src) << 8); - ++src; - green = ((ush)(*src) << 8); - ++src; - blue = ((ush)(*src) << 8); - ++src; - pixel = ((red >> RShift) & RMask) | - ((green >> GShift) & GMask) | - ((blue >> BShift) & BMask); - /* recall that we set ximage->byte_order = MSBFirst above */ - *dest++ = (char)((pixel >> 8) & 0xff); - *dest++ = (char)( pixel & 0xff); - } - } else /* if (rpng2_info.channels == 4) */ { - for (i = rpng2_info.width; i > 0; --i) { - r = *src++; - g = *src++; - b = *src++; - a = *src++; - if (bg_image) { - bg_red = *src2++; - bg_green = *src2++; - bg_blue = *src2++; - } - if (a == 255) { - red = ((ush)r << 8); - green = ((ush)g << 8); - blue = ((ush)b << 8); - } else if (a == 0) { - red = ((ush)bg_red << 8); - green = ((ush)bg_green << 8); - blue = ((ush)bg_blue << 8); - } else { - /* this macro (from png.h) composites the foreground - * and background values and puts the result back into - * the first argument (== fg byte here: safe) */ - alpha_composite(r, r, a, bg_red); - alpha_composite(g, g, a, bg_green); - alpha_composite(b, b, a, bg_blue); - red = ((ush)r << 8); - green = ((ush)g << 8); - blue = ((ush)b << 8); - } - pixel = ((red >> RShift) & RMask) | - ((green >> GShift) & GMask) | - ((blue >> BShift) & BMask); - /* recall that we set ximage->byte_order = MSBFirst above */ - *dest++ = (char)((pixel >> 8) & 0xff); - *dest++ = (char)( pixel & 0xff); - } - } - - } else /* depth == 8 */ { - - /* GRR: add 8-bit support */ - - } - - -/*--------------------------------------------------------------------------- - Display after every 16 rows or when on one of last two rows. (Region - may include previously displayed lines due to interlacing--i.e., not - contiguous. Also, second-to-last row is final one in interlaced images - with odd number of rows.) For demos, flush (and delay) after every 16th - row so "sparse" passes don't go twice as fast. - ---------------------------------------------------------------------------*/ - - if (demo_timing && (row - firstrow >= 16 || row >= rpng2_info.height-2)) { - XPutImage(display, window, gc, ximage, 0, (int)firstrow, 0, - (int)firstrow, rpng2_info.width, row - firstrow + 1); - XFlush(display); - rows = 0; - usleep(usleep_duration); - } else - if (!demo_timing && ((rows & 0xf) == 0 || row >= rpng2_info.height-2)) { - XPutImage(display, window, gc, ximage, 0, (int)firstrow, 0, - (int)firstrow, rpng2_info.width, row - firstrow + 1); - XFlush(display); - rows = 0; - } - -} - - - - - -static void rpng2_x_finish_display(void) -{ - Trace((stderr, "beginning rpng2_x_finish_display()\n")) - - /* last row has already been displayed by rpng2_x_display_row(), so we - * have nothing to do here except set a flag and let the user know that - * the image is done */ - - rpng2_info.state = kDone; - printf( - "Done. Press Q, Esc or mouse button 1 (within image window) to quit.\n"); - fflush(stdout); -} - - - - - -static void rpng2_x_redisplay_image(ulg startcol, ulg startrow, - ulg width, ulg height) -{ - uch bg_red = rpng2_info.bg_red; - uch bg_green = rpng2_info.bg_green; - uch bg_blue = rpng2_info.bg_blue; - uch *src, *src2=NULL; - char *dest; - uch r, g, b, a; - ulg i, row, lastrow = 0; - ulg pixel; - int ximage_rowbytes = ximage->bytes_per_line; - - - Trace((stderr, "beginning display loop (image_channels == %d)\n", - rpng2_info.channels)) - Trace((stderr, " (width = %ld, rowbytes = %d, ximage_rowbytes = %d)\n", - rpng2_info.width, rpng2_info.rowbytes, ximage_rowbytes)) - Trace((stderr, " (bpp = %d)\n", ximage->bits_per_pixel)) - Trace((stderr, " (byte_order = %s)\n", ximage->byte_order == MSBFirst? - "MSBFirst" : (ximage->byte_order == LSBFirst? "LSBFirst" : "unknown"))) - -/*--------------------------------------------------------------------------- - Aside from the use of the rpng2_info struct and of src2 (for background - image), this routine is identical to rpng_x_display_image() in the non- - progressive version of the program--for the simple reason that redisplay - of the image against a new background happens after the image is fully - decoded and therefore is, by definition, non-progressive. - ---------------------------------------------------------------------------*/ - - if (depth == 24 || depth == 32) { - ulg red, green, blue; - int bpp = ximage->bits_per_pixel; - - for (lastrow = row = startrow; row < startrow+height; ++row) { - src = rpng2_info.image_data + row*rpng2_info.rowbytes; - if (bg_image) - src2 = bg_data + row*bg_rowbytes; - dest = ximage->data + row*ximage_rowbytes; - if (rpng2_info.channels == 3) { - for (i = rpng2_info.width; i > 0; --i) { - red = *src++; - green = *src++; - blue = *src++; -#ifdef NO_24BIT_MASKS - pixel = (red << RShift) | - (green << GShift) | - (blue << BShift); - /* recall that we set ximage->byte_order = MSBFirst above */ - if (bpp == 32) { - *dest++ = (char)((pixel >> 24) & 0xff); - *dest++ = (char)((pixel >> 16) & 0xff); - *dest++ = (char)((pixel >> 8) & 0xff); - *dest++ = (char)( pixel & 0xff); - } else { - /* this assumes bpp == 24 & bits are packed low */ - /* (probably need to use RShift, RMask, etc.) */ - *dest++ = (char)((pixel >> 16) & 0xff); - *dest++ = (char)((pixel >> 8) & 0xff); - *dest++ = (char)( pixel & 0xff); - } -#else - red = (RShift < 0)? red << (-RShift) : red >> RShift; - green = (GShift < 0)? green << (-GShift) : green >> GShift; - blue = (BShift < 0)? blue << (-BShift) : blue >> BShift; - pixel = (red & RMask) | (green & GMask) | (blue & BMask); - /* recall that we set ximage->byte_order = MSBFirst above */ - if (bpp == 32) { - *dest++ = (char)((pixel >> 24) & 0xff); - *dest++ = (char)((pixel >> 16) & 0xff); - *dest++ = (char)((pixel >> 8) & 0xff); - *dest++ = (char)( pixel & 0xff); - } else { - /* GRR BUG */ - /* this assumes bpp == 24 & bits are packed low */ - /* (probably need to use RShift/RMask/etc. here, too) */ - *dest++ = (char)((pixel >> 16) & 0xff); - *dest++ = (char)((pixel >> 8) & 0xff); - *dest++ = (char)( pixel & 0xff); - } -#endif - } - - } else /* if (rpng2_info.channels == 4) */ { - for (i = rpng2_info.width; i > 0; --i) { - r = *src++; - g = *src++; - b = *src++; - a = *src++; - if (bg_image) { - bg_red = *src2++; - bg_green = *src2++; - bg_blue = *src2++; - } - if (a == 255) { - red = r; - green = g; - blue = b; - } else if (a == 0) { - red = bg_red; - green = bg_green; - blue = bg_blue; - } else { - /* this macro (from png.h) composites the foreground - * and background values and puts the result into the - * first argument */ - alpha_composite(red, r, a, bg_red); - alpha_composite(green, g, a, bg_green); - alpha_composite(blue, b, a, bg_blue); - } -#ifdef NO_24BIT_MASKS - pixel = (red << RShift) | - (green << GShift) | - (blue << BShift); - /* recall that we set ximage->byte_order = MSBFirst above */ - if (bpp == 32) { - *dest++ = (char)((pixel >> 24) & 0xff); - *dest++ = (char)((pixel >> 16) & 0xff); - *dest++ = (char)((pixel >> 8) & 0xff); - *dest++ = (char)( pixel & 0xff); - } else { - /* this assumes bpp == 24 & bits are packed low */ - /* (probably need to use RShift, RMask, etc.) */ - *dest++ = (char)((pixel >> 16) & 0xff); - *dest++ = (char)((pixel >> 8) & 0xff); - *dest++ = (char)( pixel & 0xff); - } -#else - red = (RShift < 0)? red << (-RShift) : red >> RShift; - green = (GShift < 0)? green << (-GShift) : green >> GShift; - blue = (BShift < 0)? blue << (-BShift) : blue >> BShift; - pixel = (red & RMask) | (green & GMask) | (blue & BMask); - /* recall that we set ximage->byte_order = MSBFirst above */ - if (bpp == 32) { - *dest++ = (char)((pixel >> 24) & 0xff); - *dest++ = (char)((pixel >> 16) & 0xff); - *dest++ = (char)((pixel >> 8) & 0xff); - *dest++ = (char)( pixel & 0xff); - } else { - /* GRR BUG */ - /* this assumes bpp == 24 & bits are packed low */ - /* (probably need to use RShift/RMask/etc. here, too) */ - *dest++ = (char)((pixel >> 16) & 0xff); - *dest++ = (char)((pixel >> 8) & 0xff); - *dest++ = (char)( pixel & 0xff); - } -#endif - } - } - /* display after every 16 lines */ - if (((row+1) & 0xf) == 0) { - XPutImage(display, window, gc, ximage, 0, (int)lastrow, 0, - (int)lastrow, rpng2_info.width, 16); - XFlush(display); - lastrow = row + 1; - } - } - - } else if (depth == 16) { - ush red, green, blue; - - for (lastrow = row = startrow; row < startrow+height; ++row) { - src = rpng2_info.row_pointers[row]; - if (bg_image) - src2 = bg_data + row*bg_rowbytes; - dest = ximage->data + row*ximage_rowbytes; - if (rpng2_info.channels == 3) { - for (i = rpng2_info.width; i > 0; --i) { - red = ((ush)(*src) << 8); - ++src; - green = ((ush)(*src) << 8); - ++src; - blue = ((ush)(*src) << 8); - ++src; - pixel = ((red >> RShift) & RMask) | - ((green >> GShift) & GMask) | - ((blue >> BShift) & BMask); - /* recall that we set ximage->byte_order = MSBFirst above */ - *dest++ = (char)((pixel >> 8) & 0xff); - *dest++ = (char)( pixel & 0xff); - } - } else /* if (rpng2_info.channels == 4) */ { - for (i = rpng2_info.width; i > 0; --i) { - r = *src++; - g = *src++; - b = *src++; - a = *src++; - if (bg_image) { - bg_red = *src2++; - bg_green = *src2++; - bg_blue = *src2++; - } - if (a == 255) { - red = ((ush)r << 8); - green = ((ush)g << 8); - blue = ((ush)b << 8); - } else if (a == 0) { - red = ((ush)bg_red << 8); - green = ((ush)bg_green << 8); - blue = ((ush)bg_blue << 8); - } else { - /* this macro (from png.h) composites the foreground - * and background values and puts the result back into - * the first argument (== fg byte here: safe) */ - alpha_composite(r, r, a, bg_red); - alpha_composite(g, g, a, bg_green); - alpha_composite(b, b, a, bg_blue); - red = ((ush)r << 8); - green = ((ush)g << 8); - blue = ((ush)b << 8); - } - pixel = ((red >> RShift) & RMask) | - ((green >> GShift) & GMask) | - ((blue >> BShift) & BMask); - /* recall that we set ximage->byte_order = MSBFirst above */ - *dest++ = (char)((pixel >> 8) & 0xff); - *dest++ = (char)( pixel & 0xff); - } - } - /* display after every 16 lines */ - if (((row+1) & 0xf) == 0) { - XPutImage(display, window, gc, ximage, 0, (int)lastrow, 0, - (int)lastrow, rpng2_info.width, 16); - XFlush(display); - lastrow = row + 1; - } - } - - } else /* depth == 8 */ { - - /* GRR: add 8-bit support */ - - } - - Trace((stderr, "calling final XPutImage()\n")) - if (lastrow < startrow+height) { - XPutImage(display, window, gc, ximage, 0, (int)lastrow, 0, - (int)lastrow, rpng2_info.width, rpng2_info.height-lastrow); - XFlush(display); - } - - (void)startcol; - (void)width; - -} /* end function rpng2_x_redisplay_image() */ - - - - - -#ifdef FEATURE_LOOP - -static void rpng2_x_reload_bg_image(void) -{ - char *dest; - uch r1, r2, g1, g2, b1, b2; - uch r1_inv, r2_inv, g1_inv, g2_inv, b1_inv, b2_inv; - int k, hmax, max; - int xidx, yidx, yidx_max; - int even_odd_vert, even_odd_horiz, even_odd; - int invert_gradient2 = (bg[pat].type & 0x08); - int invert_column; - ulg i, row; - - - bgscale = (pat == 0)? 8 : bgscale_default; - yidx_max = bgscale - 1; - -/*--------------------------------------------------------------------------- - Vertical gradients (ramps) in NxN squares, alternating direction and - colors (N == bgscale). - ---------------------------------------------------------------------------*/ - - if ((bg[pat].type & 0x07) == 0) { - uch r1_min = rgb[bg[pat].rgb1_min].r; - uch g1_min = rgb[bg[pat].rgb1_min].g; - uch b1_min = rgb[bg[pat].rgb1_min].b; - uch r2_min = rgb[bg[pat].rgb2_min].r; - uch g2_min = rgb[bg[pat].rgb2_min].g; - uch b2_min = rgb[bg[pat].rgb2_min].b; - int r1_diff = rgb[bg[pat].rgb1_max].r - r1_min; - int g1_diff = rgb[bg[pat].rgb1_max].g - g1_min; - int b1_diff = rgb[bg[pat].rgb1_max].b - b1_min; - int r2_diff = rgb[bg[pat].rgb2_max].r - r2_min; - int g2_diff = rgb[bg[pat].rgb2_max].g - g2_min; - int b2_diff = rgb[bg[pat].rgb2_max].b - b2_min; - - for (row = 0; row < rpng2_info.height; ++row) { - yidx = (int)(row % bgscale); - even_odd_vert = (int)((row / bgscale) & 1); - - r1 = r1_min + (r1_diff * yidx) / yidx_max; - g1 = g1_min + (g1_diff * yidx) / yidx_max; - b1 = b1_min + (b1_diff * yidx) / yidx_max; - r1_inv = r1_min + (r1_diff * (yidx_max-yidx)) / yidx_max; - g1_inv = g1_min + (g1_diff * (yidx_max-yidx)) / yidx_max; - b1_inv = b1_min + (b1_diff * (yidx_max-yidx)) / yidx_max; - - r2 = r2_min + (r2_diff * yidx) / yidx_max; - g2 = g2_min + (g2_diff * yidx) / yidx_max; - b2 = b2_min + (b2_diff * yidx) / yidx_max; - r2_inv = r2_min + (r2_diff * (yidx_max-yidx)) / yidx_max; - g2_inv = g2_min + (g2_diff * (yidx_max-yidx)) / yidx_max; - b2_inv = b2_min + (b2_diff * (yidx_max-yidx)) / yidx_max; - - dest = (char *)bg_data + row*bg_rowbytes; - for (i = 0; i < rpng2_info.width; ++i) { - even_odd_horiz = (int)((i / bgscale) & 1); - even_odd = even_odd_vert ^ even_odd_horiz; - invert_column = - (even_odd_horiz && (bg[pat].type & 0x10)); - if (even_odd == 0) { /* gradient #1 */ - if (invert_column) { - *dest++ = r1_inv; - *dest++ = g1_inv; - *dest++ = b1_inv; - } else { - *dest++ = r1; - *dest++ = g1; - *dest++ = b1; - } - } else { /* gradient #2 */ - if ((invert_column && invert_gradient2) || - (!invert_column && !invert_gradient2)) - { - *dest++ = r2; /* not inverted or */ - *dest++ = g2; /* doubly inverted */ - *dest++ = b2; - } else { - *dest++ = r2_inv; - *dest++ = g2_inv; /* singly inverted */ - *dest++ = b2_inv; - } - } - } - } - -/*--------------------------------------------------------------------------- - Soft gradient-diamonds with scale = bgscale. Code contributed by Adam - M. Costello. - ---------------------------------------------------------------------------*/ - - } else if ((bg[pat].type & 0x07) == 1) { - - hmax = (bgscale-1)/2; /* half the max weight of a color */ - max = 2*hmax; /* the max weight of a color */ - - r1 = rgb[bg[pat].rgb1_max].r; - g1 = rgb[bg[pat].rgb1_max].g; - b1 = rgb[bg[pat].rgb1_max].b; - r2 = rgb[bg[pat].rgb2_max].r; - g2 = rgb[bg[pat].rgb2_max].g; - b2 = rgb[bg[pat].rgb2_max].b; - - for (row = 0; row < rpng2_info.height; ++row) { - yidx = (int)(row % bgscale); - if (yidx > hmax) - yidx = bgscale-1 - yidx; - dest = (char *)bg_data + row*bg_rowbytes; - for (i = 0; i < rpng2_info.width; ++i) { - xidx = (int)(i % bgscale); - if (xidx > hmax) - xidx = bgscale-1 - xidx; - k = xidx + yidx; - *dest++ = (k*r1 + (max-k)*r2) / max; - *dest++ = (k*g1 + (max-k)*g2) / max; - *dest++ = (k*b1 + (max-k)*b2) / max; - } - } - -/*--------------------------------------------------------------------------- - Radial "starburst" with azimuthal sinusoids; [eventually number of sinu- - soids will equal bgscale?]. This one is slow but very cool. Code con- - tributed by Pieter S. van der Meulen (originally in Smalltalk). - ---------------------------------------------------------------------------*/ - - } else if ((bg[pat].type & 0x07) == 2) { - uch ch; - int ii, x, y, hw, hh, grayspot; - double freq, rotate, saturate, gray, intensity; - double angle=0.0, aoffset=0.0, maxDist, dist; - double red=0.0, green=0.0, blue=0.0, hue, s, v, f, p, q, t; - - hh = (int)(rpng2_info.height / 2); - hw = (int)(rpng2_info.width / 2); - - /* variables for radial waves: - * aoffset: number of degrees to rotate hue [CURRENTLY NOT USED] - * freq: number of color beams originating from the center - * grayspot: size of the graying center area (anti-alias) - * rotate: rotation of the beams as a function of radius - * saturate: saturation of beams' shape azimuthally - */ - angle = CLIP(angle, 0.0, 360.0); - grayspot = CLIP(bg[pat].bg_gray, 1, (hh + hw)); - freq = MAX((double)bg[pat].bg_freq, 0.0); - saturate = (double)bg[pat].bg_bsat * 0.1; - rotate = (double)bg[pat].bg_brot * 0.1; - gray = 0.0; - intensity = 0.0; - maxDist = (double)((hw*hw) + (hh*hh)); - - for (row = 0; row < rpng2_info.height; ++row) { - y = (int)(row - hh); - dest = (char *)bg_data + row*bg_rowbytes; - for (i = 0; i < rpng2_info.width; ++i) { - x = (int)(i - hw); - angle = (x == 0)? PI_2 : atan((double)y / (double)x); - gray = (double)MAX(ABS(y), ABS(x)) / grayspot; - gray = MIN(1.0, gray); - dist = (double)((x*x) + (y*y)) / maxDist; - intensity = cos((angle+(rotate*dist*PI)) * freq) * - gray * saturate; - intensity = (MAX(MIN(intensity,1.0),-1.0) + 1.0) * 0.5; - hue = (angle + PI) * INV_PI_360 + aoffset; - s = gray * ((double)(ABS(x)+ABS(y)) / (double)(hw + hh)); - s = MIN(MAX(s,0.0), 1.0); - v = MIN(MAX(intensity,0.0), 1.0); - - if (s == 0.0) { - ch = (uch)(v * 255.0); - *dest++ = ch; - *dest++ = ch; - *dest++ = ch; - } else { - if ((hue < 0.0) || (hue >= 360.0)) - hue -= (((int)(hue / 360.0)) * 360.0); - hue /= 60.0; - ii = (int)hue; - f = hue - (double)ii; - p = (1.0 - s) * v; - q = (1.0 - (s * f)) * v; - t = (1.0 - (s * (1.0 - f))) * v; - if (ii == 0) { red = v; green = t; blue = p; } - else if (ii == 1) { red = q; green = v; blue = p; } - else if (ii == 2) { red = p; green = v; blue = t; } - else if (ii == 3) { red = p; green = q; blue = v; } - else if (ii == 4) { red = t; green = p; blue = v; } - else if (ii == 5) { red = v; green = p; blue = q; } - *dest++ = (uch)(red * 255.0); - *dest++ = (uch)(green * 255.0); - *dest++ = (uch)(blue * 255.0); - } - } - } - } - -} /* end function rpng2_x_reload_bg_image() */ - - - - - -static int is_number(char *p) -{ - while (*p) { - if (!isdigit(*p)) - return FALSE; - ++p; - } - return TRUE; -} - -#endif /* FEATURE_LOOP */ - - - - - -static void rpng2_x_cleanup(void) -{ - if (bg_image && bg_data) { - free(bg_data); - bg_data = NULL; - } - - if (rpng2_info.image_data) { - free(rpng2_info.image_data); - rpng2_info.image_data = NULL; - } - - if (rpng2_info.row_pointers) { - free(rpng2_info.row_pointers); - rpng2_info.row_pointers = NULL; - } - - if (ximage) { - if (ximage->data) { - free(ximage->data); /* we allocated it, so we free it */ - ximage->data = (char *)NULL; /* instead of XDestroyImage() */ - } - XDestroyImage(ximage); - ximage = NULL; - } - - if (have_gc) - XFreeGC(display, gc); - - if (have_window) - XDestroyWindow(display, window); - - if (have_colormap) - XFreeColormap(display, colormap); - - if (have_nondefault_visual) - XFree(visual_list); -} - - - - - -static int rpng2_x_msb(ulg u32val) -{ - int i; - - for (i = 31; i >= 0; --i) { - if (u32val & 0x80000000L) - break; - u32val <<= 1; - } - return i; -} diff --git a/contrib/gregbook/toucan.png b/contrib/gregbook/toucan.png deleted file mode 100644 index 03960d4939938541ca3f8efee4bf13ffdecbb2f5..0000000000000000000000000000000000000000 GIT binary patch literal 0 HcmV?d00001 literal 12901 zcma*NWpo@(vMt(@TFlH07Be$5GlRv<%*<@D#mr!V#mp>=(Xz$NEcMklbI#m(>%AXu zud1#cJ2EmWGkdMBijHVyMJYr$JU9RVfG8s^uKIZ``aIKNAOHX`!oF1CrvbDSQ4j%u zMHH|cr5gbN5CCO)b%{^?{|#6GI1B*%zje6(GU5NlRXmX=`N0_(A%xV>KIS3t$)QLv zQPAKaY!jf6!6DFKA+BP;aS(tXOVE|;Uwp<0CBPxek%2QX+9N}6AR78ggv z7y<(tDDvfVZh(LUCaDtRFhN+r_B0_*rDFZ%cgL7s9GZxYKaNytiAy8o< zK4ankJ;1+)_%uHc3!1etPoK|Y|FdGB%Ksn01O8|4J{$jgBVYkwFaQWRFz_wD zcdvi$%1u>K4FFaS4p9LFfgquvVL)(YupoHQKUfBRfZqSbKFR+@Ea>gi5dR;(-VdVC4xLbxrnJC%1@d03#v_sPy`DI z#TlfBgvIoM42mg1!!%U~fzbW3@x?JfxW%NBWH@-~(jYE^qPPz?TWuREkU7XeRz^L5 z)zI>vp=|&8_%|jKPuzGs^^^~C_x@J`fdc-aA1WYukOQ_TO;%<;MIbQ=x!`vn5GPw2 zDEZULr+>x^0FVG=#6{G-*3W$5xfh>5grL|M$^WKI4*jfQiPuZU9gHbtfkr=&WwSL% zv5i1cx)_WYB{v`4mr;p~|&T`^d9t;6jdFSmVAcQM70jBuR z?DCrr)rN21M1F^DwpOHf(0Mmq*4qpki|KZmt3(dweY4NV@07ejk{o^Dj1K4fcG!3) zmiU_>G75d9f^4;3ONXdK8*Syu3Oq-&Fs{+WHBQPe)5^eBia)QXHevUq^>0j=YYxq1 zB+txJ=r8k!mYI=D>GaJw4tvu-T~01;PbspQHcxpxJu_VUW+NH;R(d179U8i_FNCbA zwTha**o3-x!OATw-r&eCuV9z{C@*n8#^%rlbXQfCAf#?XG)O8QO22baFPc2fG>~X| zd~hg+BxsqcH*37}8-u?KBY`s-bLaVS8kzFrX8E&GN^6>mDhQ10CbQ3Lxi=&_;aGYt|XqdtN;~36;Z*~)4-@L|zt7WFJnPXDgMrr8A21>xD4=rh$ zx`f?YYcTI(hX3>x!gd7Bzll48xv8_uIG!QIPa7CH@SCu)u$W9qWmWB{dV;-)lU;gy zrZ~1WzKNTO9kl4yIfN7!cOx6JS>3&o@MfSeR}o<2s$6g5b~aL{=3Thj#yPk%H&T%k zMei>yxv*|_41?~8XXWyxJEjpdU9Ytvo!J9{E6bqAMJ|57^@09uM(LNqjWbvT z=vO{Z`o4IWFz~a-5L!6QqXIU&K;9!WpZ#muwl3C|aK~E3-!kGZ^AhQkMD- zNVB@qHx)LBh%*!J=)fRmn(Md1ij+BYU#uIq!iaudTOu^1NOBc$-e6LMS-%EXuu?gO zOO8z476;7!Q)fx5+da3Z(6O%^&*3B|=+Q5DhO92EIW?TE&H6}N&MUQ|`=)W~N5d8q zeZo`dV`JR*KInu?DgHw(6|6s=R?OM@9kyZPjJBuxf^aGV4I3B)NA54~PWJ?oeO+TU z0{6K^)5-3oX|(o{5Umk8vaAb^um_P!DySz0jftfY9h|BQHZ>4u};|3qQZ&8o^Qu2Et)yj?hmk6_-CjWtv)m5?}1ryI; z&^H#i94EsMvA(`WXZqyIvH9nNpGf%$l`VZgv`n88sQFF55!H0Cc~3rg(wXkcGw_{_ zt;m$MVBwIOexEax%UEk}WVC6%5bw}av9fyUw9l{+f9MLhh%5Jj&KmEsm);H3icisL z+BH8OoOg#*(ZqFs^_+l!;V2TmCV!|!p*b~q6ndvDZ!*IIy8@s%}mJCUoS%mJZR9PUZ3C~-fq zNGyCRYe}(mtu>VkSwi7p?PUWz@tDaz?rliToGWq!+wLxr-p|QvBv5N2^h&_+2R>4| zSwNGJj3cu3rVx(~Wp#6DW4pX2&+z+)@SO;q-lLMB9wnKp&kC;6Z%QCvUGyd zE!hf*uX~bfZv;Btn7@zV%#}1K^HDQ&bktgdP6xNgWpzIc&LS#DXeMRfB|v;|trpze z+7MrXq_F-Vi#&&2W9OHI_p1hh)qt~e1~(j;kQlT)9V(bPqf)j$z zh+EL~V@);)wPv${r7UT@SP;d1+<~o}_4oHzha%+wy6OGz4$ceX(s@_LQ_XE+*{_tj zzY;3hmCedgXs;rJ5L%^xZy81b(eV;PqG5~A8ND9{+ znpdmTKs1^HJ!GU-vo_A1TKW3%II9ZohSLBC=bn?VYBVL1=&QKCq~EIRCxQ^MOA4-4 zeyrWs#@9`2y+J3eb%aat*UPFrBZ%EW)7V5IHb?0ySbF1~QoQwTcNMxB`MKSZR)@qj zr>9I7O6k9U`NfuRLGux8qwmyq03Q48TZB$MnE2Pmo`|4J>K|qsf2ADZi*&y>sTtH` zgcG#o1~}93vpG(tHbJIM7d27Ss~Y;g1~`RAcQ1 z6(#w-bz8cbg=P#SG<0NSRAf|4L}K-42a-$7B^L25OH5?LeQ$2^$bIi;6>;V7W6HC^ zhxv2z!)0W!V+Y7@533S}kAfHDw_#;9tA4Q6qLcl^RqBN;suUJJMVm-Hx?4NAn+}g{ zK1BV_n@+Yco90byI|G;J4EXf`D85l{mgB{$JR?;=aC&dGU{>4TNic0e#d01+hgdP$wU^ zcY>MpA`HFEkY|R($Fb`U3ko-P6v;l)B&MWU#?}HjYHFt@j1l-jxWj*IYd8E?i@&Li zuJ`y`*M5O|v*qA;eOV9Xl1eA^%6t5?x|M{D+)6jQq9c{#!+>Qkeoo@)=61w-{#{{o zDLyWaUqHb3ZG;eF=Et*v9T@mM;TWHXqmS#Z=v!MLs1s?!oU_wi%JzLfUPXmcii$i2 z^RSRY<=lz9%yw)mPf{o=rE|XQV5LtNCI?n}F3ev)`DlT%IL!%hof=Ts7HQBvf?PV^;fC9Pa#k0m4 z0iVD6JFX>pIW9sid^x`xJhs-2!$YYE)mfh|Af?_y#0ONCv@-Yw)gAR%v=I6+)Zxfe zZ^`l)`sT|+Evh{0%F9P#Nx%uxO&oo_e8;&7f%pLQL*M|?8y~QWU|4E`ATAMhE#-dO zv1C7O%XKpi8wN|e%3$_I&7MpsirDxL&C$B@qIq{CBz-L%!J=!)?yu0~t|*vMpQlgO z{1cg~IZ?$9ECKiM=G6f^lViao;%gCOYinJ(*QGB`Z{xkge&b-gQ1gq@N(g%zlkold zww4RGYv&)!zlj-sCgSsUZ)KxQ#NF@n?mm;Z(CO=S*u_On(5(5ARFO(rioF-u6!R;m z-aPhEGlI)Wpl2^IHJ;xGynN_tJ3b}X;$CSnMY7kacWUnLdbU;S-xfV2FQU5wd;42C zPIfQsOI7$bC)97hpYG zlz*F)g1k>t`XksYBS%+CP{Ey4RI}IPda1}Urf)*4ftq2cwHG+%W>VFu7;#qNxYZ%# znlV8}R^QxJlmadtQ)<$5Sp!yvk&#x+JBwX{>H46_@7-EGXMpk0t|X6?c_I}m6lCDQh%|_WqE7pZnbDaOSEZ{Qa1( zpd{GG8=M>bx!l=@oF~R*YmSO~1S_ zC6>fb%f*}0tdeFNWXn=PyvU3&vtEjXB%Bab+Rd>=w`srb0lNO1)_RYzMWFhYs%Zbe=RE7wLoP2KrX)$=J*zBeGHnyS|-{Vs5h2MHbhaC(}d z=J@WzX`^$x5?gM86-h$OjheicqVrnZXUH&3!jtBABkcDuSR^r{z%;QGjZ#o@KeGGo z1@=wf31jmag{sS=3!?W%c`i35#roAw>4~ zWct=gq_&#udL!parJql4W&NpZmY((^WuJ;bi12}!p7~Oz%OYv4Z{X5!C%P`7Y#7pX zFEKqH6=7-KPUBn!7t0|XjOZ98{XHA)^p;(+yWnKWdXT(2E4EMy&+{keYd%b{&Dq}A zxwCBk?o#7~?dh~Qs{XobY82wh~kBrlN ze84+V1R&0b zr5x<+928i$UIrogsj|q!-?QbBXXWa+odPX26FTu0A(YisRrR^gd{PSbeX5OI!4S4w zk<|?j*uhK*7P7N#SbrTl_c11YTh`9fX>8-(G0>0^F~p+ckx5EV|H$P>JeTQ2O!f5W zA!T5=G`uHqjm4HSs^KtW=D?ulv|U*F4G#n#K-$rjECg!}V?X>oS9N>0FQQ zrQg9OM@6bAg$Jws@^zH$7w*#o9~#c+f|*Seqb7|lRsU_3q#r*t)&MrGP-)KUYvK|RYU60s1i{L9 z?5aBC9OH!hMVLkH7Rd-49Hc)r7NaY>TKqY30*7EWwf(b}ZSWg0L&4gSxLA4hyc!mv zHMXW};7c7h>z`=z;s$N1U*&^)*$#X&Yja7})v@x-f;JFXXU6t;b4!vYe>pnY36I|x z!Hi=^ZJWSk2CvqgX~LgrdwCR>Oije)+2Ix5@#HQFk{hRHY$tzqAYly*4Ux!akc*8% z%E>k&}il|nti(BY+KQ0vm0dtd?(fdo1|2P<~omUo%no*-)ni9 zZ@YG^EwV_|&kAemd9EHYIiIeCQJzErP} z7+uU-kDry@itDT}Zgz%OoSzgzl3UQ;szU|`tC}`C&!YE>JTFZ{Al?bzNx-G#S=&pZ z5N_35&;!qr3iq^sXx;q@Jl)d4^sFv%tTu9wy9n_Ho#|&7Ibrxw>Y8Tuyv;_#mVu5= z?US|P%N`)-Ql_+2e=SS5(A(r!~@AZ_st85|gSvyNRx;M*ChZ&bETRn=_sC_(31*z+ASqxYA5j~!7 zz+Z>95r=MK1&J5-92TeZ3%b?cJl9{4GQcLlhi$U4*St8lbI?cqP1(Zd>^6Jx;j`ax zBeid(n5O%%*FAC|1;2iO^fTLuc*^WV4TlSyGxPZ(oj!W|ckPt&@K2}QUwGE5^rC*m zQq2rK1HB)5oHLwA^kM_g;DW3Gm>czJ#{JogNO|IIo;_W~FJ^Dg6GCJi(BjjNK6YjH~xxza9vOb~g!o4Mv!P`6MP4{>zw z3QOeamD+0q;b?H)VE;DzCQqhoc7SYb<=ptC;{xq!<+t-%y8qlaE~lhuZhQ%UZuh-0 zH0QKKc+s{xSX^kk73{>Q+^;8*?$j{3r{!Kf%6@+<_%4DTGPBEfj}qitn~L1$3)xchji99_ z2Agl;!G5)&eh9QjmOZ^N;mbxRR(6Zmx>(Y?p2~#0aQJO+;^1InkN(O~Q$$6?u#%gM zV&lZb+HXAV>Qy%Xup;y3&E4y!ZeTNpVO-uR%VA5Snb-E+a$fW{CSP;2BxjA>oze05R;I6jvp6{YVU|d)H1wqYC zXjHVoD>iiFPCZyfWMK23~DDkHEtAH2vAH{N$^uK_)o0VnG?l;%lz0VD+A* zzdB&N3QJ0G2R$pNzU!x({!3dpr1IEkumm2jh`W}`3)^&s(1jsr>G&=7pC@;w7xZ#G z|3ReXWgvL)j4?`04TF~lK|)G; zBccI|GD3!Ob=%)dsQH1cn$Ka-*Ee^JVC)JENl4h^he0a=GP7?&yE!1jqK1csx*%S| z19T9v^E6c;tz+rWggSS9??Wfx6N+wm{%D*FX8=ekgkyQ|n*QhBe1cjl@)mJKs&qX+ zb7KdGo|}YsX0RA0q~*Jho^0&aQK+}Jj@Gj6$sQawJyy2Vhdc{e*{_TiD{UQyJS^7u z9<0x6+ZZiO$W2N?6$uKz((2WGirarxE?mDEAeoV*Tudz_#7qiwB z761LabLM+@L|Pz~_;9{~O$_3EQ5I3xo!me3(E=qMYw6`398}Qy>BMP;15DgQBA}#1 zIo%R^dNQqg7J}!6{Lkthp7*5^Mb+M!U%9k zqghj=LxtyYi#e+aKRDqr2z{71Ftf2BC+eare&&PBhmR@UM4i|G$zWfw;Opz^B*~J0)8@~4+69)@)}G(p#WrYV zAwQ^Nb_D9!VvwMMGUtBh+OuYop|wP*1>(}+8b6MkB;mX$<;8Pn0 zV>2Ee-+J-4q8J)7qEJw>;Ala=5{(#*t!jgRrg%DBz6!gjdLA#Gc11CaE71a)UfcQL z)tX%XEUFi*K1p%^+Fhq97tflx1fRef9SzvdmQgC;xr&yC5#C;9z~wtGXg9 zlQ(GYUi}smg#HCelqykcW}Jo1QSRo}653-Q%W}Aqnr19;H<_9{AA&F+7e`pCqYrHs z{Mp)Rna4+Db??9eDi<&$rL0t5N^tR7eMWC=pVh>jqwK<&0AOHZLK4bkOc~a}cSBRq@suj` zerx~C24D9&1$^i&l%?nkt~~{%`;x+<6=q$ORhIn#6p!$}G=1=Z&A1DK4Jk0m6>=jM z{SFt?oNELK!+_O>9@D76pR;Sz_iEq&&{n<`Hval4BX_W;s8kc93X6 zF?ZzbH=W@o@DoIk2sLkM-^{4Ko$yOUVuIzJZgSn3#xxyZLVD@9gNvbd^pDX!Mk(Qzoz~Ll&Lk6^sg%k(opS*J6~8ZC~*@ zX`n#qFn|-vf^Mo8P=?urCp^H$E-NwHKO7R-ySS(;>v#&AN|hj+ceZC6%C`k04xWV1L`+NyPfpY?5M z|8pE{@Ysf3zBf9J2u&?QUJiG2bJKJS(|VLCX5QE#lS_{+Z9`<${1}g);tZYH)#STd zSFVJI_aN@muVsB48|g!eiEkwW0k5k|!VC^xrHBCoIdDTkx<%(Zx^;X7J?jx%Q4WR3 z0Fb{dNBo$Mk}_%3w!)i~Ff5$iP+DA*frpAS4{Z_Pr_Yj?lS4+f@76}bsPru-2^0I> zBEwJNz-k*3LBgIOI_MNaQE=YBIQYsW!QY9j@ZEn`MguN(XrOSupJ!bi{ZKJmt|7Lx z?Z=O{F?$FVR(wLR0G%_-01}O^zq&eDo|2eylkDZ}MbkgRq^+x3tOcgzb zOLpmqwIeitcYohla(@T#f8-9$6eDEYujBDVdWs`$d&u9(c`;^A@WD}w+ZK9`Mj0z6 z&cl8Qn$sqepL1?06hZ;S!v$PcR}t6^~-ZC;1>Cip<+N{8R;|dG`qc zv}O9apixC}f+C3=zP>iCVJN_b$6Kn6^kqq*6D| zh=?F+p`PMSqJfi8Y6!MtVj=BMo-wkppKTyMeEAKrn)GyKdd3I`HMqR@>-mo4n`u(e z?9srF>*9ppD_#%OzUqmYzD~{;br8wP=AEtOLzT220VMZBtU5jVaA_O^ zA!DgPg=_t`TT;)Y`DWA_CQb3vv%6nr?+O$?x>?7>Ar+5 zC!}9KHDTUll=4wl7RJt*H0IMqKlAtV`w7^z$_Of|Y}=N*iPP?%8h(+~S{WhUgL+07 zIJspM`uT!&#KRSMd3^STKZZP^(-Vsr7Gj;fo*!{2M#GzP6UNTqNIUQt69f>qXxZ^R7~C`#}tLcUlLm@ z%iWH^ z!5JZ!+tjH37;J@$zqJ5CcLfDJGf82PGo>Wr?eFj;Q%UopnpXtD#=IkRP&D)fR{?`@ZrTF5J2u8d8$ z7|V=dAM?Pz?r)gxtUuh_jK-{Ermi*s63YH zOoPFjCR)xcE6Z9@)$WPnt2rmhN^1$;bxi9c@JQ6_=l$Z=2nqn7vlO=7;lftqEU>b7 zP`y;QAKt~$3fdMRwQyyrbjoWZ*_-lZTib@b_G^8w>6^xC_zs9hXLyZy@4f?i94Vhg z`!BZWtEj3qhtgoyA&>jk`(1$%ouJxvqG!0 z;rmd(r(?L^UAY)oU zys`^7JnJTs5R};PJSWaN88C?;PdnmaDM=a!1zoNcbpbaG+hGcl94!OhJ%Vrc24f;U zn_Ar}JZzz$!0y;;Y1zJn{$^u+&i~oNmc|vEiS2g>$XR~m>#$2Zjz>~vW)L}pVN~0O zkWxHP3etDfsNc>^j;ATZj0=K3X?K7z4btqW^>3qpOp zTOSwMqH{g(q$a2*3+opi_FD%d5&FH04&iWLu~Dw?Oh>ut`A!!_rZ|$ly(JY0I)s2wqK zs4lnwlPS|!tHWJv_E^z8kB}JPNDm0hMdTqBB*hvX9_C3Egx|)B7T~n+-zWR51WFF~ zykOM&Gvu7d%$jn>t}qXVw-0sCx)1l4)Uvd1>qy|xNZ2tzL7cugWy?lA5^(SCVm2*j-lF52V@ z+T%x*`0$QnzCi=sQ)sQE))$@5i!5n_%E;WVC-CQKJ}4QyFA?w54K&f~&R7^d6jIU6 zPj`1xfXC^L*Jscf-{V`m$+~`0;&)~W=mb49C_HNA&mUfMHzy)W1G*D==8R-$N%7Zr zbF6;+e6*#WbR$n3w-0m&PQ^MyQ7YqO`kFbBryEFO%AgS@5>jnOMe3u_t_d?%4X*TH z{5+BTylYAX%v=|+#TsxTno;spmmLhP@5DYGb;_LLVILP@C>fFS;v)~!tu~=`PTn(w z@kq2sccr}peszs_a|jf~@0}a(6)VWFA|VbDn}oBIbW&_Bdy?$OI#a2_7$wSqVNMW8 zQ7moec)LT|o}Km&ELgd(qU71jCs@!EQ?R)buGTAc`(&6qv-!Bwc!oQ3r~BS{UR<7w zzki8DO>^bD?$zuVE?6~FS0Elv9U$D^?!mf^V8)z$rNjVY%ID;{EdFzTiE1K=;e9QkgXl#UrL)nNm{m6wV0io`SMJnp7jViK_}}T?)OW`2<^`_|QGc(qUi8*gRgx z{-!?xiX#CoA7{3v@;VAO`^mfBIAxo(5^u@`?- z)!O(Kd=k9Yde7M2WlPxo!YWbUs9DH}eX_B<*m^qYN+4D&rZb3)BF-KJ&P71fPk}$O zJEdAJIYUf+tAU{x4?>CGnbMGE@jD1gHO+dQh(lR=O z916my -#include -#include -#include /* for jmpbuf declaration in writepng.h */ -#include - -#ifdef DOS_OS2_W32 -# include /* for isatty(), setmode() prototypes */ -# include /* O_BINARY for fdopen() without text translation */ -# ifdef __EMX__ -# ifndef getch -# define getch() _read_kbd(0, 1, 0) /* need getche() */ -# endif -# else /* !__EMX__ */ -# ifdef __GO32__ -# include -# define getch() getkey() /* GRR: need getche() */ -# else -# include /* for getche() console input */ -# endif -# endif /* ?__EMX__ */ -# define FGETS(buf,len,stream) dos_kbd_gets(buf,len) -#else -# include /* for isatty() prototype */ -# define FGETS fgets -#endif - -/* #define DEBUG : this enables the Trace() macros */ - -/* #define FORBID_LATIN1_CTRL : this requires the user to re-enter any - text that includes control characters discouraged by the PNG spec; text - that includes an escape character (27) must be re-entered regardless */ - -#include "writepng.h" /* typedefs, common macros, writepng prototypes */ - - - -/* local prototypes */ - -static int wpng_isvalid_latin1(uch *p, int len); -static void wpng_cleanup(void); - -#ifdef DOS_OS2_W32 - static char *dos_kbd_gets(char *buf, int len); -#endif - - - -static mainprog_info wpng_info; /* lone global */ - - - -int main(int argc, char **argv) -{ -#ifndef DOS_OS2_W32 - FILE *keybd; -#endif -#ifdef sgi - FILE *tmpfile; /* or we could just use keybd, since no overlap */ - char tmpline[80]; -#endif - char *inname = NULL, outname[256]; - char *p, pnmchar, pnmline[256]; - char *bgstr, *textbuf = NULL; - ulg rowbytes; - int rc, len = 0; - int error = 0; - int text = FALSE; - int maxval; - double LUT_exponent; /* just the lookup table */ - double CRT_exponent = 2.2; /* just the monitor */ - double default_display_exponent; /* whole display system */ - double default_gamma = 0.0; - - - wpng_info.infile = NULL; - wpng_info.outfile = NULL; - wpng_info.image_data = NULL; - wpng_info.row_pointers = NULL; - wpng_info.filter = FALSE; - wpng_info.interlaced = FALSE; - wpng_info.have_bg = FALSE; - wpng_info.have_time = FALSE; - wpng_info.have_text = 0; - wpng_info.gamma = 0.0; - - - /* First get the default value for our display-system exponent, i.e., - * the product of the CRT exponent and the exponent corresponding to - * the frame-buffer's lookup table (LUT), if any. If the PNM image - * looks correct on the user's display system, its file gamma is the - * inverse of this value. (Note that this is not an exhaustive list - * of LUT values--e.g., OpenStep has a lot of weird ones--but it should - * cover 99% of the current possibilities. This section must ensure - * that default_display_exponent is positive.) */ - -#if defined(NeXT) - /* third-party utilities can modify the default LUT exponent */ - LUT_exponent = 1.0 / 2.2; - /* - if (some_next_function_that_returns_gamma(&next_gamma)) - LUT_exponent = 1.0 / next_gamma; - */ -#elif defined(sgi) - LUT_exponent = 1.0 / 1.7; - /* there doesn't seem to be any documented function to - * get the "gamma" value, so we do it the hard way */ - tmpfile = fopen("/etc/config/system.glGammaVal", "r"); - if (tmpfile) { - double sgi_gamma; - - fgets(tmpline, 80, tmpfile); - fclose(tmpfile); - sgi_gamma = atof(tmpline); - if (sgi_gamma > 0.0) - LUT_exponent = 1.0 / sgi_gamma; - } -#elif defined(Macintosh) - LUT_exponent = 1.8 / 2.61; - /* - if (some_mac_function_that_returns_gamma(&mac_gamma)) - LUT_exponent = mac_gamma / 2.61; - */ -#else - LUT_exponent = 1.0; /* assume no LUT: most PCs */ -#endif - - /* the defaults above give 1.0, 1.3, 1.5 and 2.2, respectively: */ - default_display_exponent = LUT_exponent * CRT_exponent; - - - /* If the user has set the SCREEN_GAMMA environment variable as suggested - * (somewhat imprecisely) in the libpng documentation, use that; otherwise - * use the default value we just calculated. Either way, the user may - * override this via a command-line option. */ - - if ((p = getenv("SCREEN_GAMMA")) != NULL) { - double exponent = atof(p); - - if (exponent > 0.0) - default_gamma = 1.0 / exponent; - } - - if (default_gamma == 0.0) - default_gamma = 1.0 / default_display_exponent; - - - /* Now parse the command line for options and the PNM filename. */ - - while (*++argv && !error) { - if (!strncmp(*argv, "-i", 2)) { - wpng_info.interlaced = TRUE; - } else if (!strncmp(*argv, "-time", 3)) { - wpng_info.modtime = time(NULL); - wpng_info.have_time = TRUE; - } else if (!strncmp(*argv, "-text", 3)) { - text = TRUE; - } else if (!strncmp(*argv, "-gamma", 2)) { - if (!*++argv) - ++error; - else { - wpng_info.gamma = atof(*argv); - if (wpng_info.gamma <= 0.0) - ++error; - else if (wpng_info.gamma > 1.01) - fprintf(stderr, PROGNAME - " warning: file gammas are usually less than 1.0\n"); - } - } else if (!strncmp(*argv, "-bgcolor", 4)) { - if (!*++argv) - ++error; - else { - bgstr = *argv; - if (strlen(bgstr) != 7 || bgstr[0] != '#') - ++error; - else { - unsigned r, g, b; /* this way quiets compiler warnings */ - - sscanf(bgstr+1, "%2x%2x%2x", &r, &g, &b); - wpng_info.bg_red = (uch)r; - wpng_info.bg_green = (uch)g; - wpng_info.bg_blue = (uch)b; - wpng_info.have_bg = TRUE; - } - } - } else { - if (**argv != '-') { - inname = *argv; - if (argv[1]) /* shouldn't be any more args after filename */ - ++error; - } else - ++error; /* not expecting any other options */ - } - } - - - /* open the input and output files, or register an error and abort */ - - if (!inname) { - if (isatty(0)) { - fprintf(stderr, PROGNAME - ": must give input filename or provide image data via stdin\n"); - ++error; - } else { -#ifdef DOS_OS2_W32 - /* some buggy C libraries require BOTH setmode() and fdopen(bin) */ - setmode(fileno(stdin), O_BINARY); - setmode(fileno(stdout), O_BINARY); -#endif - if ((wpng_info.infile = fdopen(fileno(stdin), "rb")) == NULL) { - fprintf(stderr, PROGNAME - ": unable to reopen stdin in binary mode\n"); - ++error; - } else - if ((wpng_info.outfile = fdopen(fileno(stdout), "wb")) == NULL) { - fprintf(stderr, PROGNAME - ": unable to reopen stdout in binary mode\n"); - fclose(wpng_info.infile); - ++error; - } else - wpng_info.filter = TRUE; - } - } else if ((len = strlen(inname)) > 250) { - fprintf(stderr, PROGNAME ": input filename is too long [%d chars]\n", - len); - ++error; - } else if (!(wpng_info.infile = fopen(inname, "rb"))) { - fprintf(stderr, PROGNAME ": can't open input file [%s]\n", inname); - ++error; - } - - if (!error) { - fgets(pnmline, 256, wpng_info.infile); - if (pnmline[0] != 'P' || ((pnmchar = pnmline[1]) != '5' && - pnmchar != '6' && pnmchar != '8')) - { - fprintf(stderr, PROGNAME - ": input file [%s] is not a binary PGM, PPM or PAM file\n", - inname); - ++error; - } else { - wpng_info.pnmtype = (int)(pnmchar - '0'); - if (wpng_info.pnmtype != 8) - wpng_info.have_bg = FALSE; /* no need for bg if opaque */ - do { - fgets(pnmline, 256, wpng_info.infile); /* lose any comments */ - } while (pnmline[0] == '#'); - sscanf(pnmline, "%ld %ld", &wpng_info.width, &wpng_info.height); - do { - fgets(pnmline, 256, wpng_info.infile); /* more comment lines */ - } while (pnmline[0] == '#'); - sscanf(pnmline, "%d", &maxval); - if (wpng_info.width <= 0L || wpng_info.height <= 0L || - maxval != 255) - { - fprintf(stderr, PROGNAME - ": only positive width/height, maxval == 255 allowed \n"); - ++error; - } - wpng_info.sample_depth = 8; /* <==> maxval 255 */ - - if (!wpng_info.filter) { - /* make outname from inname */ - if ((p = strrchr(inname, '.')) == NULL || - (p - inname) != (len - 4)) - { - strcpy(outname, inname); - strcpy(outname+len, ".png"); - } else { - len -= 4; - strncpy(outname, inname, len); - strcpy(outname+len, ".png"); - } - /* check if outname already exists; if not, open */ - if ((wpng_info.outfile = fopen(outname, "rb")) != NULL) { - fprintf(stderr, PROGNAME ": output file exists [%s]\n", - outname); - fclose(wpng_info.outfile); - ++error; - } else if (!(wpng_info.outfile = fopen(outname, "wb"))) { - fprintf(stderr, PROGNAME ": can't open output file [%s]\n", - outname); - ++error; - } - } - } - if (error) { - fclose(wpng_info.infile); - wpng_info.infile = NULL; - if (wpng_info.filter) { - fclose(wpng_info.outfile); - wpng_info.outfile = NULL; - } - } - } - - - /* if we had any errors, print usage and die horrible death...arrr! */ - - if (error) { - fprintf(stderr, "\n%s %s: %s\n", PROGNAME, VERSION, APPNAME); - writepng_version_info(); - fprintf(stderr, "\n" -"Usage: %s [-gamma exp] [-bgcolor bg] [-text] [-time] [-interlace] pnmfile\n" -"or: ... | %s [-gamma exp] [-bgcolor bg] [-text] [-time] [-interlace] | ...\n" - " exp \ttransfer-function exponent (``gamma'') of the image in\n" - "\t\t floating-point format (e.g., ``%.5f''); if image looks\n" - "\t\t correct on given display system, image gamma is equal to\n" - "\t\t inverse of display-system exponent, i.e., 1 / (LUT * CRT)\n" - "\t\t (where LUT = lookup-table exponent and CRT = CRT exponent;\n" - "\t\t first varies, second is usually 2.2, all are positive)\n" - " bg \tdesired background color for alpha-channel images, in\n" - "\t\t 7-character hex RGB format (e.g., ``#ff7700'' for orange:\n" - "\t\t same as HTML colors)\n" - " -text\tprompt interactively for text info (tEXt chunks)\n" - " -time\tinclude a tIME chunk (last modification time)\n" - " -interlace\twrite interlaced PNG image\n" - "\n" -"pnmfile or stdin must be a binary PGM (`P5'), PPM (`P6') or (extremely\n" -"unofficial and unsupported!) PAM (`P8') file. Currently it is required\n" -"to have maxval == 255 (i.e., no scaling). If pnmfile is specified, it\n" -"is converted to the corresponding PNG file with the same base name but a\n" -"``.png'' extension; files read from stdin are converted and sent to stdout.\n" -"The conversion is progressive (low memory usage) unless interlacing is\n" -"requested; in that case the whole image will be buffered in memory and\n" -"written in one call.\n" - "\n", PROGNAME, PROGNAME, default_gamma); - exit(1); - } - - - /* prepare the text buffers for libpng's use; note that even though - * PNG's png_text struct includes a length field, we don't have to fill - * it out */ - - if (text && -#ifndef DOS_OS2_W32 - (keybd = fdopen(fileno(stderr), "r")) != NULL && -#endif - (textbuf = (char *)malloc((5 + 9)*75)) != NULL) - { - int i, valid, result; - - fprintf(stderr, - "Enter text info (no more than 72 characters per line);\n"); - fprintf(stderr, "to skip a field, hit the key.\n"); - /* note: just leaves len == 1 */ - - do { - valid = TRUE; - p = textbuf + TEXT_TITLE_OFFSET; - fprintf(stderr, " Title: "); - fflush(stderr); - if (FGETS(p, 74, keybd) && (len = strlen(p)) > 1) { - if (p[len-1] == '\n') - p[--len] = '\0'; - wpng_info.title = p; - wpng_info.have_text |= TEXT_TITLE; - if ((result = wpng_isvalid_latin1((uch *)p, len)) >= 0) { - fprintf(stderr, " " PROGNAME " warning: character code" - " %u is %sdiscouraged by the PNG\n specification " - "[first occurrence was at character position #%d]\n", - (unsigned)p[result], (p[result] == 27)? "strongly " : "", - result+1); - fflush(stderr); -#ifdef FORBID_LATIN1_CTRL - wpng_info.have_text &= ~TEXT_TITLE; - valid = FALSE; -#else - if (p[result] == 27) { /* escape character */ - wpng_info.have_text &= ~TEXT_TITLE; - valid = FALSE; - } -#endif - } - } - } while (!valid); - - do { - valid = TRUE; - p = textbuf + TEXT_AUTHOR_OFFSET; - fprintf(stderr, " Author: "); - fflush(stderr); - if (FGETS(p, 74, keybd) && (len = strlen(p)) > 1) { - if (p[len-1] == '\n') - p[--len] = '\0'; - wpng_info.author = p; - wpng_info.have_text |= TEXT_AUTHOR; - if ((result = wpng_isvalid_latin1((uch *)p, len)) >= 0) { - fprintf(stderr, " " PROGNAME " warning: character code" - " %u is %sdiscouraged by the PNG\n specification " - "[first occurrence was at character position #%d]\n", - (unsigned)p[result], (p[result] == 27)? "strongly " : "", - result+1); - fflush(stderr); -#ifdef FORBID_LATIN1_CTRL - wpng_info.have_text &= ~TEXT_AUTHOR; - valid = FALSE; -#else - if (p[result] == 27) { /* escape character */ - wpng_info.have_text &= ~TEXT_AUTHOR; - valid = FALSE; - } -#endif - } - } - } while (!valid); - - do { - valid = TRUE; - p = textbuf + TEXT_DESC_OFFSET; - fprintf(stderr, " Description (up to 9 lines):\n"); - for (i = 1; i < 10; ++i) { - fprintf(stderr, " [%d] ", i); - fflush(stderr); - if (FGETS(p, 74, keybd) && (len = strlen(p)) > 1) - p += len; /* now points at NULL; char before is newline */ - else - break; - } - if ((len = p - (textbuf + TEXT_DESC_OFFSET)) > 1) { - if (p[-1] == '\n') { - p[-1] = '\0'; - --len; - } - wpng_info.desc = textbuf + TEXT_DESC_OFFSET; - wpng_info.have_text |= TEXT_DESC; - p = textbuf + TEXT_DESC_OFFSET; - if ((result = wpng_isvalid_latin1((uch *)p, len)) >= 0) { - fprintf(stderr, " " PROGNAME " warning: character code" - " %u is %sdiscouraged by the PNG\n specification " - "[first occurrence was at character position #%d]\n", - (unsigned)p[result], (p[result] == 27)? "strongly " : "", - result+1); - fflush(stderr); -#ifdef FORBID_LATIN1_CTRL - wpng_info.have_text &= ~TEXT_DESC; - valid = FALSE; -#else - if (p[result] == 27) { /* escape character */ - wpng_info.have_text &= ~TEXT_DESC; - valid = FALSE; - } -#endif - } - } - } while (!valid); - - do { - valid = TRUE; - p = textbuf + TEXT_COPY_OFFSET; - fprintf(stderr, " Copyright: "); - fflush(stderr); - if (FGETS(p, 74, keybd) && (len = strlen(p)) > 1) { - if (p[len-1] == '\n') - p[--len] = '\0'; - wpng_info.copyright = p; - wpng_info.have_text |= TEXT_COPY; - if ((result = wpng_isvalid_latin1((uch *)p, len)) >= 0) { - fprintf(stderr, " " PROGNAME " warning: character code" - " %u is %sdiscouraged by the PNG\n specification " - "[first occurrence was at character position #%d]\n", - (unsigned)p[result], (p[result] == 27)? "strongly " : "", - result+1); - fflush(stderr); -#ifdef FORBID_LATIN1_CTRL - wpng_info.have_text &= ~TEXT_COPY; - valid = FALSE; -#else - if (p[result] == 27) { /* escape character */ - wpng_info.have_text &= ~TEXT_COPY; - valid = FALSE; - } -#endif - } - } - } while (!valid); - - do { - valid = TRUE; - p = textbuf + TEXT_EMAIL_OFFSET; - fprintf(stderr, " E-mail: "); - fflush(stderr); - if (FGETS(p, 74, keybd) && (len = strlen(p)) > 1) { - if (p[len-1] == '\n') - p[--len] = '\0'; - wpng_info.email = p; - wpng_info.have_text |= TEXT_EMAIL; - if ((result = wpng_isvalid_latin1((uch *)p, len)) >= 0) { - fprintf(stderr, " " PROGNAME " warning: character code" - " %u is %sdiscouraged by the PNG\n specification " - "[first occurrence was at character position #%d]\n", - (unsigned)p[result], (p[result] == 27)? "strongly " : "", - result+1); - fflush(stderr); -#ifdef FORBID_LATIN1_CTRL - wpng_info.have_text &= ~TEXT_EMAIL; - valid = FALSE; -#else - if (p[result] == 27) { /* escape character */ - wpng_info.have_text &= ~TEXT_EMAIL; - valid = FALSE; - } -#endif - } - } - } while (!valid); - - do { - valid = TRUE; - p = textbuf + TEXT_URL_OFFSET; - fprintf(stderr, " URL: "); - fflush(stderr); - if (FGETS(p, 74, keybd) && (len = strlen(p)) > 1) { - if (p[len-1] == '\n') - p[--len] = '\0'; - wpng_info.url = p; - wpng_info.have_text |= TEXT_URL; - if ((result = wpng_isvalid_latin1((uch *)p, len)) >= 0) { - fprintf(stderr, " " PROGNAME " warning: character code" - " %u is %sdiscouraged by the PNG\n specification " - "[first occurrence was at character position #%d]\n", - (unsigned)p[result], (p[result] == 27)? "strongly " : "", - result+1); - fflush(stderr); -#ifdef FORBID_LATIN1_CTRL - wpng_info.have_text &= ~TEXT_URL; - valid = FALSE; -#else - if (p[result] == 27) { /* escape character */ - wpng_info.have_text &= ~TEXT_URL; - valid = FALSE; - } -#endif - } - } - } while (!valid); - -#ifndef DOS_OS2_W32 - fclose(keybd); -#endif - - } else if (text) { - fprintf(stderr, PROGNAME ": unable to allocate memory for text\n"); - text = FALSE; - wpng_info.have_text = 0; - } - - - /* allocate libpng stuff, initialize transformations, write pre-IDAT data */ - - if ((rc = writepng_init(&wpng_info)) != 0) { - switch (rc) { - case 2: - fprintf(stderr, PROGNAME - ": libpng initialization problem (longjmp)\n"); - break; - case 4: - fprintf(stderr, PROGNAME ": insufficient memory\n"); - break; - case 11: - fprintf(stderr, PROGNAME - ": internal logic error (unexpected PNM type)\n"); - break; - default: - fprintf(stderr, PROGNAME - ": unknown writepng_init() error\n"); - break; - } - exit(rc); - } - - - /* free textbuf, since it's a completely local variable and all text info - * has just been written to the PNG file */ - - if (text && textbuf) { - free(textbuf); - textbuf = NULL; - } - - - /* calculate rowbytes on basis of image type; note that this becomes much - * more complicated if we choose to support PBM type, ASCII PNM types, or - * 16-bit-per-sample binary data [currently not an official NetPBM type] */ - - if (wpng_info.pnmtype == 5) - rowbytes = wpng_info.width; - else if (wpng_info.pnmtype == 6) - rowbytes = wpng_info.width * 3; - else /* if (wpng_info.pnmtype == 8) */ - rowbytes = wpng_info.width * 4; - - - /* read and write the image, either in its entirety (if writing interlaced - * PNG) or row by row (if non-interlaced) */ - - fprintf(stderr, "Encoding image data...\n"); - fflush(stderr); - - if (wpng_info.interlaced) { - long i; - ulg bytes; - ulg image_bytes; - - /* Guard against integer overflow */ - if (wpng_info_height > ((size_t)(-1)/rowbytes || - wpng_info_height > ((ulg)(-1)/rowbytes) { - fprintf(stderr, PROGNAME ": image_data buffer too large\n"); - writepng_cleanup(&wpng_info); - wpng_cleanup(); - exit(5); - } - - image_bytes = rowbytes * wpng_info.height; - - wpng_info.image_data = (uch *)malloc(image_bytes); - wpng_info.row_pointers = (uch **)malloc(wpng_info.height*sizeof(uch *)); - if (wpng_info.image_data == NULL || wpng_info.row_pointers == NULL) { - fprintf(stderr, PROGNAME ": insufficient memory for image data\n"); - writepng_cleanup(&wpng_info); - wpng_cleanup(); - exit(5); - } - for (i = 0; i < wpng_info.height; ++i) - wpng_info.row_pointers[i] = wpng_info.image_data + i*rowbytes; - bytes = fread(wpng_info.image_data, 1, image_bytes, wpng_info.infile); - if (bytes != image_bytes) { - fprintf(stderr, PROGNAME ": expected %lu bytes, got %lu bytes\n", - image_bytes, bytes); - fprintf(stderr, " (continuing anyway)\n"); - } - if (writepng_encode_image(&wpng_info) != 0) { - fprintf(stderr, PROGNAME - ": libpng problem (longjmp) while writing image data\n"); - writepng_cleanup(&wpng_info); - wpng_cleanup(); - exit(2); - } - - } else /* not interlaced: write progressively (row by row) */ { - long j; - ulg bytes; - - wpng_info.image_data = (uch *)malloc(rowbytes); - if (wpng_info.image_data == NULL) { - fprintf(stderr, PROGNAME ": insufficient memory for row data\n"); - writepng_cleanup(&wpng_info); - wpng_cleanup(); - exit(5); - } - error = 0; - for (j = wpng_info.height; j > 0L; --j) { - bytes = fread(wpng_info.image_data, 1, rowbytes, wpng_info.infile); - if (bytes != rowbytes) { - fprintf(stderr, PROGNAME - ": expected %lu bytes, got %lu bytes (row %ld)\n", rowbytes, - bytes, wpng_info.height-j); - ++error; - break; - } - if (writepng_encode_row(&wpng_info) != 0) { - fprintf(stderr, PROGNAME - ": libpng problem (longjmp) while writing row %ld\n", - wpng_info.height-j); - ++error; - break; - } - } - if (error) { - writepng_cleanup(&wpng_info); - wpng_cleanup(); - exit(2); - } - if (writepng_encode_finish(&wpng_info) != 0) { - fprintf(stderr, PROGNAME ": error on final libpng call\n"); - writepng_cleanup(&wpng_info); - wpng_cleanup(); - exit(2); - } - } - - - /* OK, we're done (successfully): clean up all resources and quit */ - - fprintf(stderr, "Done.\n"); - fflush(stderr); - - writepng_cleanup(&wpng_info); - wpng_cleanup(); - - return 0; -} - - - - - -static int wpng_isvalid_latin1(uch *p, int len) -{ - int i, result = -1; - - for (i = 0; i < len; ++i) { - if (p[i] == 10 || (p[i] > 31 && p[i] < 127) || p[i] > 160) - continue; /* character is completely OK */ - if (result < 0 || (p[result] != 27 && p[i] == 27)) - result = i; /* mark location of first questionable one */ - } /* or of first escape character (bad) */ - - return result; -} - - - - - -static void wpng_cleanup(void) -{ - if (wpng_info.outfile) { - fclose(wpng_info.outfile); - wpng_info.outfile = NULL; - } - - if (wpng_info.infile) { - fclose(wpng_info.infile); - wpng_info.infile = NULL; - } - - if (wpng_info.image_data) { - free(wpng_info.image_data); - wpng_info.image_data = NULL; - } - - if (wpng_info.row_pointers) { - free(wpng_info.row_pointers); - wpng_info.row_pointers = NULL; - } -} - - - - -#ifdef DOS_OS2_W32 - -static char *dos_kbd_gets(char *buf, int len) -{ - int ch, count=0; - - do { - buf[count++] = ch = getche(); - } while (ch != '\r' && count < len-1); - - buf[count--] = '\0'; /* terminate string */ - if (buf[count] == '\r') /* Enter key makes CR, so change to newline */ - buf[count] = '\n'; - - fprintf(stderr, "\n"); /* Enter key does *not* cause a newline */ - fflush(stderr); - - return buf; -} - -#endif /* DOS_OS2_W32 */ diff --git a/contrib/gregbook/writepng.c b/contrib/gregbook/writepng.c deleted file mode 100644 index 055c74374..000000000 --- a/contrib/gregbook/writepng.c +++ /dev/null @@ -1,401 +0,0 @@ -/*--------------------------------------------------------------------------- - - wpng - simple PNG-writing program writepng.c - - --------------------------------------------------------------------------- - - Copyright (c) 1998-2007, 2017 Greg Roelofs. All rights reserved. - - This software is provided "as is," without warranty of any kind, - express or implied. In no event shall the author or contributors - be held liable for any damages arising in any way from the use of - this software. - - The contents of this file are DUAL-LICENSED. You may modify and/or - redistribute this software according to the terms of one of the - following two licenses (at your option): - - - LICENSE 1 ("BSD-like with advertising clause"): - - Permission is granted to anyone to use this software for any purpose, - including commercial applications, and to alter it and redistribute - it freely, subject to the following restrictions: - - 1. Redistributions of source code must retain the above copyright - notice, disclaimer, and this list of conditions. - 2. Redistributions in binary form must reproduce the above copyright - notice, disclaimer, and this list of conditions in the documenta- - tion and/or other materials provided with the distribution. - 3. All advertising materials mentioning features or use of this - software must display the following acknowledgment: - - This product includes software developed by Greg Roelofs - and contributors for the book, "PNG: The Definitive Guide," - published by O'Reilly and Associates. - - - LICENSE 2 (GNU GPL v2 or later): - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software Foundation, - Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - - ---------------------------------------------------------------------------*/ - - -#include /* for exit() prototype */ -#include - -#include "png.h" /* libpng header, includes setjmp.h */ -#include "writepng.h" /* typedefs, common macros, public prototypes */ - - -/* local prototype */ - -static void writepng_error_handler(png_structp png_ptr, png_const_charp msg); - - - -void writepng_version_info(void) -{ - fprintf(stderr, " Compiled with libpng %s; using libpng %s.\n", - PNG_LIBPNG_VER_STRING, png_libpng_ver); - fprintf(stderr, " Compiled with zlib %s; using zlib %s.\n", - ZLIB_VERSION, zlib_version); -} - - - - -/* returns 0 for success, 2 for libpng problem, 4 for out of memory, 11 for - * unexpected pnmtype; note that outfile might be stdout */ - -int writepng_init(mainprog_info *mainprog_ptr) -{ - png_structp png_ptr; /* note: temporary variables! */ - png_infop info_ptr; - int color_type, interlace_type; - - - /* could also replace libpng warning-handler (final NULL), but no need: */ - - png_ptr = png_create_write_struct(png_get_libpng_ver(NULL), mainprog_ptr, - writepng_error_handler, NULL); - if (!png_ptr) - return 4; /* out of memory */ - - info_ptr = png_create_info_struct(png_ptr); - if (!info_ptr) { - png_destroy_write_struct(&png_ptr, NULL); - return 4; /* out of memory */ - } - - - /* setjmp() must be called in every function that calls a PNG-writing - * libpng function, unless an alternate error handler was installed-- - * but compatible error handlers must either use longjmp() themselves - * (as in this program) or some other method to return control to - * application code, so here we go: */ - - if (setjmp(mainprog_ptr->jmpbuf)) { - png_destroy_write_struct(&png_ptr, &info_ptr); - return 2; - } - - - /* make sure outfile is (re)opened in BINARY mode */ - - png_init_io(png_ptr, mainprog_ptr->outfile); - - - /* set the compression levels--in general, always want to leave filtering - * turned on (except for palette images) and allow all of the filters, - * which is the default; want 32K zlib window, unless entire image buffer - * is 16K or smaller (unknown here)--also the default; usually want max - * compression (NOT the default); and remaining compression flags should - * be left alone */ - - png_set_compression_level(png_ptr, Z_BEST_COMPRESSION); -/* - >> this is default for no filtering; Z_FILTERED is default otherwise: - png_set_compression_strategy(png_ptr, Z_DEFAULT_STRATEGY); - >> these are all defaults: - png_set_compression_mem_level(png_ptr, 8); - png_set_compression_window_bits(png_ptr, 15); - png_set_compression_method(png_ptr, 8); - */ - - - /* set the image parameters appropriately */ - - if (mainprog_ptr->pnmtype == 5) - color_type = PNG_COLOR_TYPE_GRAY; - else if (mainprog_ptr->pnmtype == 6) - color_type = PNG_COLOR_TYPE_RGB; - else if (mainprog_ptr->pnmtype == 8) - color_type = PNG_COLOR_TYPE_RGB_ALPHA; - else { - png_destroy_write_struct(&png_ptr, &info_ptr); - return 11; - } - - interlace_type = mainprog_ptr->interlaced? PNG_INTERLACE_ADAM7 : - PNG_INTERLACE_NONE; - - png_set_IHDR(png_ptr, info_ptr, mainprog_ptr->width, mainprog_ptr->height, - mainprog_ptr->sample_depth, color_type, interlace_type, - PNG_COMPRESSION_TYPE_DEFAULT, PNG_FILTER_TYPE_DEFAULT); - - if (mainprog_ptr->gamma > 0.0) - png_set_gAMA(png_ptr, info_ptr, mainprog_ptr->gamma); - - if (mainprog_ptr->have_bg) { /* we know it's RGBA, not gray+alpha */ - png_color_16 background; - - background.red = mainprog_ptr->bg_red; - background.green = mainprog_ptr->bg_green; - background.blue = mainprog_ptr->bg_blue; - png_set_bKGD(png_ptr, info_ptr, &background); - } - - if (mainprog_ptr->have_time) { - png_time modtime; - - png_convert_from_time_t(&modtime, mainprog_ptr->modtime); - png_set_tIME(png_ptr, info_ptr, &modtime); - } - - if (mainprog_ptr->have_text) { - png_text text[6]; - int num_text = 0; - - if (mainprog_ptr->have_text & TEXT_TITLE) { - text[num_text].compression = PNG_TEXT_COMPRESSION_NONE; - text[num_text].key = "Title"; - text[num_text].text = mainprog_ptr->title; - ++num_text; - } - if (mainprog_ptr->have_text & TEXT_AUTHOR) { - text[num_text].compression = PNG_TEXT_COMPRESSION_NONE; - text[num_text].key = "Author"; - text[num_text].text = mainprog_ptr->author; - ++num_text; - } - if (mainprog_ptr->have_text & TEXT_DESC) { - text[num_text].compression = PNG_TEXT_COMPRESSION_NONE; - text[num_text].key = "Description"; - text[num_text].text = mainprog_ptr->desc; - ++num_text; - } - if (mainprog_ptr->have_text & TEXT_COPY) { - text[num_text].compression = PNG_TEXT_COMPRESSION_NONE; - text[num_text].key = "Copyright"; - text[num_text].text = mainprog_ptr->copyright; - ++num_text; - } - if (mainprog_ptr->have_text & TEXT_EMAIL) { - text[num_text].compression = PNG_TEXT_COMPRESSION_NONE; - text[num_text].key = "E-mail"; - text[num_text].text = mainprog_ptr->email; - ++num_text; - } - if (mainprog_ptr->have_text & TEXT_URL) { - text[num_text].compression = PNG_TEXT_COMPRESSION_NONE; - text[num_text].key = "URL"; - text[num_text].text = mainprog_ptr->url; - ++num_text; - } - png_set_text(png_ptr, info_ptr, text, num_text); - } - - - /* write all chunks up to (but not including) first IDAT */ - - png_write_info(png_ptr, info_ptr); - - - /* if we wanted to write any more text info *after* the image data, we - * would set up text struct(s) here and call png_set_text() again, with - * just the new data; png_set_tIME() could also go here, but it would - * have no effect since we already called it above (only one tIME chunk - * allowed) */ - - - /* set up the transformations: for now, just pack low-bit-depth pixels - * into bytes (one, two or four pixels per byte) */ - - png_set_packing(png_ptr); -/* png_set_shift(png_ptr, &sig_bit); to scale low-bit-depth values */ - - - /* make sure we save our pointers for use in writepng_encode_image() */ - - mainprog_ptr->png_ptr = png_ptr; - mainprog_ptr->info_ptr = info_ptr; - - - /* OK, that's all we need to do for now; return happy */ - - return 0; -} - - - - - -/* returns 0 for success, 2 for libpng (longjmp) problem */ - -int writepng_encode_image(mainprog_info *mainprog_ptr) -{ - png_structp png_ptr = (png_structp)mainprog_ptr->png_ptr; - png_infop info_ptr = (png_infop)mainprog_ptr->info_ptr; - - - /* as always, setjmp() must be called in every function that calls a - * PNG-writing libpng function */ - - if (setjmp(mainprog_ptr->jmpbuf)) { - png_destroy_write_struct(&png_ptr, &info_ptr); - mainprog_ptr->png_ptr = NULL; - mainprog_ptr->info_ptr = NULL; - return 2; - } - - - /* and now we just write the whole image; libpng takes care of interlacing - * for us */ - - png_write_image(png_ptr, mainprog_ptr->row_pointers); - - - /* since that's it, we also close out the end of the PNG file now--if we - * had any text or time info to write after the IDATs, second argument - * would be info_ptr, but we optimize slightly by sending NULL pointer: */ - - png_write_end(png_ptr, NULL); - - return 0; -} - - - - - -/* returns 0 if succeeds, 2 if libpng problem */ - -int writepng_encode_row(mainprog_info *mainprog_ptr) /* NON-interlaced only! */ -{ - png_structp png_ptr = (png_structp)mainprog_ptr->png_ptr; - png_infop info_ptr = (png_infop)mainprog_ptr->info_ptr; - - - /* as always, setjmp() must be called in every function that calls a - * PNG-writing libpng function */ - - if (setjmp(mainprog_ptr->jmpbuf)) { - png_destroy_write_struct(&png_ptr, &info_ptr); - mainprog_ptr->png_ptr = NULL; - mainprog_ptr->info_ptr = NULL; - return 2; - } - - - /* image_data points at our one row of image data */ - - png_write_row(png_ptr, mainprog_ptr->image_data); - - return 0; -} - - - - - -/* returns 0 if succeeds, 2 if libpng problem */ - -int writepng_encode_finish(mainprog_info *mainprog_ptr) /* NON-interlaced! */ -{ - png_structp png_ptr = (png_structp)mainprog_ptr->png_ptr; - png_infop info_ptr = (png_infop)mainprog_ptr->info_ptr; - - - /* as always, setjmp() must be called in every function that calls a - * PNG-writing libpng function */ - - if (setjmp(mainprog_ptr->jmpbuf)) { - png_destroy_write_struct(&png_ptr, &info_ptr); - mainprog_ptr->png_ptr = NULL; - mainprog_ptr->info_ptr = NULL; - return 2; - } - - - /* close out PNG file; if we had any text or time info to write after - * the IDATs, second argument would be info_ptr: */ - - png_write_end(png_ptr, NULL); - - return 0; -} - - - - - -void writepng_cleanup(mainprog_info *mainprog_ptr) -{ - png_structp png_ptr = (png_structp)mainprog_ptr->png_ptr; - png_infop info_ptr = (png_infop)mainprog_ptr->info_ptr; - - if (png_ptr && info_ptr) - png_destroy_write_struct(&png_ptr, &info_ptr); -} - - - - - -static void writepng_error_handler(png_structp png_ptr, png_const_charp msg) -{ - mainprog_info *mainprog_ptr; - - /* This function, aside from the extra step of retrieving the "error - * pointer" (below) and the fact that it exists within the application - * rather than within libpng, is essentially identical to libpng's - * default error handler. The second point is critical: since both - * setjmp() and longjmp() are called from the same code, they are - * guaranteed to have compatible notions of how big a jmp_buf is, - * regardless of whether _BSD_SOURCE or anything else has (or has not) - * been defined. */ - - fprintf(stderr, "writepng libpng error: %s\n", msg); - fflush(stderr); - - mainprog_ptr = png_get_error_ptr(png_ptr); - if (mainprog_ptr == NULL) { /* we are completely hosed now */ - fprintf(stderr, - "writepng severe error: jmpbuf not recoverable; terminating.\n"); - fflush(stderr); - exit(99); - } - - /* Now we have our data structure we can use the information in it - * to return control to our own higher level code (all the points - * where 'setjmp' is called in this file.) This will work with other - * error handling mechanisms as well - libpng always calls png_error - * when it can proceed no further, thus, so long as the error handler - * is intercepted, application code can do its own error recovery. - */ - longjmp(mainprog_ptr->jmpbuf, 1); -} diff --git a/contrib/gregbook/writepng.h b/contrib/gregbook/writepng.h deleted file mode 100644 index 78b966b58..000000000 --- a/contrib/gregbook/writepng.h +++ /dev/null @@ -1,133 +0,0 @@ -/*--------------------------------------------------------------------------- - - wpng - simple PNG-writing program writepng.h - - --------------------------------------------------------------------------- - - Copyright (c) 1998-2007 Greg Roelofs. All rights reserved. - - This software is provided "as is," without warranty of any kind, - express or implied. In no event shall the author or contributors - be held liable for any damages arising in any way from the use of - this software. - - The contents of this file are DUAL-LICENSED. You may modify and/or - redistribute this software according to the terms of one of the - following two licenses (at your option): - - - LICENSE 1 ("BSD-like with advertising clause"): - - Permission is granted to anyone to use this software for any purpose, - including commercial applications, and to alter it and redistribute - it freely, subject to the following restrictions: - - 1. Redistributions of source code must retain the above copyright - notice, disclaimer, and this list of conditions. - 2. Redistributions in binary form must reproduce the above copyright - notice, disclaimer, and this list of conditions in the documenta- - tion and/or other materials provided with the distribution. - 3. All advertising materials mentioning features or use of this - software must display the following acknowledgment: - - This product includes software developed by Greg Roelofs - and contributors for the book, "PNG: The Definitive Guide," - published by O'Reilly and Associates. - - - LICENSE 2 (GNU GPL v2 or later): - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software Foundation, - Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - - ---------------------------------------------------------------------------*/ - -#ifndef TRUE -# define TRUE 1 -# define FALSE 0 -#endif - -#ifndef MAX -# define MAX(a,b) ((a) > (b)? (a) : (b)) -# define MIN(a,b) ((a) < (b)? (a) : (b)) -#endif - -#ifdef DEBUG -# define Trace(x) {fprintf x ; fflush(stderr); fflush(stdout);} -#else -# define Trace(x) ; -#endif - -#define TEXT_TITLE 0x01 -#define TEXT_AUTHOR 0x02 -#define TEXT_DESC 0x04 -#define TEXT_COPY 0x08 -#define TEXT_EMAIL 0x10 -#define TEXT_URL 0x20 - -#define TEXT_TITLE_OFFSET 0 -#define TEXT_AUTHOR_OFFSET 72 -#define TEXT_COPY_OFFSET (2*72) -#define TEXT_EMAIL_OFFSET (3*72) -#define TEXT_URL_OFFSET (4*72) -#define TEXT_DESC_OFFSET (5*72) - -typedef unsigned char uch; -typedef unsigned short ush; -typedef unsigned long ulg; - -typedef struct _mainprog_info { - double gamma; - long width; - long height; - time_t modtime; - FILE *infile; - FILE *outfile; - void *png_ptr; - void *info_ptr; - uch *image_data; - uch **row_pointers; - char *title; - char *author; - char *desc; - char *copyright; - char *email; - char *url; - int filter; /* command-line-filter flag, not PNG row filter! */ - int pnmtype; - int sample_depth; - int interlaced; - int have_bg; - int have_time; - int have_text; - jmp_buf jmpbuf; - uch bg_red; - uch bg_green; - uch bg_blue; -} mainprog_info; - - -/* prototypes for public functions in writepng.c */ - -void writepng_version_info(void); - -int writepng_init(mainprog_info *mainprog_ptr); - -int writepng_encode_image(mainprog_info *mainprog_ptr); - -int writepng_encode_row(mainprog_info *mainprog_ptr); - -int writepng_encode_finish(mainprog_info *mainprog_ptr); - -void writepng_cleanup(mainprog_info *mainprog_ptr); diff --git a/contrib/libtests/fakepng.c b/contrib/libtests/fakepng.c deleted file mode 100644 index 6512c1401..000000000 --- a/contrib/libtests/fakepng.c +++ /dev/null @@ -1,65 +0,0 @@ -/* Fake a PNG - just write it out directly. - * - * COPYRIGHT: Written by John Cunningham Bowler, 2014. - * To the extent possible under law, the author has waived all copyright and - * related or neighboring rights to this work. This work is published from: - * United States. - * - */ - -#include -#include /* for crc32 */ - -void -put_uLong(uLong val) -{ - putchar(val >> 24); - putchar(val >> 16); - putchar(val >> 8); - putchar(val >> 0); -} - -void -put_chunk(const unsigned char *chunk, uInt length) -{ - uLong crc; - - put_uLong(length-4); /* Exclude the tag */ - - fwrite(chunk, length, 1, stdout); - - crc = crc32(0, Z_NULL, 0); - put_uLong(crc32(crc, chunk, length)); -} - -const unsigned char signature[] = -{ - 137, 80, 78, 71, 13, 10, 26, 10 -}; - -const unsigned char IHDR[] = -{ - 73, 72, 68, 82, /* IHDR */ - 0, 0, 0, 1, /* width */ - 0, 0, 0, 1, /* height */ - 1, /* bit depth */ - 0, /* color type: greyscale */ - 0, /* compression method */ - 0, /* filter method */ - 0 /* interlace method: none */ -}; - -const unsigned char unknown[] = -{ - 'u', 'n', 'K', 'n' /* "unKn" - private safe to copy */ -}; - -int -main(void) -{ - fwrite(signature, sizeof signature, 1, stdout); - put_chunk(IHDR, sizeof IHDR); - - for (;;) - put_chunk(unknown, sizeof unknown); -} diff --git a/contrib/libtests/gentests.sh b/contrib/libtests/gentests.sh deleted file mode 100755 index f0f8d2395..000000000 --- a/contrib/libtests/gentests.sh +++ /dev/null @@ -1,102 +0,0 @@ -#!/bin/sh -# -# Copyright (c) 2013 John Cunningham Bowler -# -# Last changed in libpng 1.6.0 [February 14, 2013] -# -# This code is released under the libpng license. -# For conditions of distribution and use, see the disclaimer -# and license in png.h -# -# Generate a set of PNG test images. The images are generated in a -# sub-directory called 'tests' by default, however a command line argument will -# change that name. The generation requires a built version of makepng in the -# current directory. -# -usage(){ - exec >&2 - echo "$0 []" - echo ' Generate a set of PNG test files in "directory" ("tests" by default)' - exit 1 -} - -mp="$PWD/makepng" -test -x "$mp" || { - exec >&2 - echo "$0: the 'makepng' program must exist" - echo " in the directory within which this program:" - echo " $mp" - echo " is executed" - usage -} - -# Just one argument: the directory -testdir="tests" -test $# -gt 1 && { - testdir="$1" - shift -} -test $# -eq 0 || usage - -# Take care not to clobber something -if test -e "$testdir" -then - test -d "$testdir" || usage -else - # mkdir -p isn't portable, so do the following - mkdir "$testdir" 2>/dev/null || mkdir -p "$testdir" || usage -fi - -# This fails in a very satisfactory way if it's not accessible -cd "$testdir" -:>"test$$.png" || { - exec >&2 - echo "$testdir: directory not writable" - usage -} -rm "test$$.png" || { - exec >&2 - echo "$testdir: you have create but not write privileges here." - echo " This is unexpected. You have a spurion; "'"'"test$$.png"'"'"." - echo " You need to remove this yourself. Try a different directory." - exit 1 -} - -# Now call makepng ($mp) to create every file we can think of with a -# reasonable name -doit(){ - for gamma in "" --sRGB --linear --1.8 - do - case "$gamma" in - "") - gname=;; - --sRGB) - gname="-srgb";; - --linear) - gname="-lin";; - --1.8) - gname="-18";; - *) - gname="-$gamma";; - esac - "$mp" $gamma "$1" "$2" "test-$1-$2$gname.png" - done -} -# -for ct in gray palette -do - for bd in 1 2 4 8 - do - doit "$ct" "$bd" - done -done -# -doit "gray" "16" -# -for ct in gray-alpha rgb rgb-alpha -do - for bd in 8 16 - do - doit "$ct" "$bd" - done -done diff --git a/contrib/libtests/makepng.c b/contrib/libtests/makepng.c deleted file mode 100644 index 312062bda..000000000 --- a/contrib/libtests/makepng.c +++ /dev/null @@ -1,1941 +0,0 @@ -/* makepng.c */ -#define _ISOC99_SOURCE -/* Copyright: */ -#define COPYRIGHT "\251 2013,2015 John Cunningham Bowler" -/* - * Last changed in libpng 1.6.20 [November 24, 2015] - * - * This code is released under the libpng license. - * For conditions of distribution and use, see the disclaimer - * and license in png.h - * - * Make a test PNG image. The arguments are as follows: - * - * makepng [--sRGB|--linear|--1.8] [--tRNS] [--nofilters] \ - * color-type bit-depth [file-name] - * - * The color-type may be numeric (and must match the numbers used by the PNG - * specification) or one of the format names listed below. The bit-depth is the - * component bit depth, or the pixel bit-depth for a color-mapped image. - * - * Without any options no color-space information is written, with the options - * an sRGB or the appropriate gAMA chunk is written. "1.8" refers to the - * display system used on older Apple computers to correct for high ambient - * light levels in the viewing environment; it applies a transform of - * approximately value^(1/1.45) to the color values and so a gAMA chunk of 65909 - * is written (1.45/2.2). - * - * The image data is generated internally. Unless --color is given the images - * used are as follows: - * - * 1 channel: a square image with a diamond, the least luminous colors are on - * the edge of the image, the most luminous in the center. - * - * 2 channels: the color channel increases in luminosity from top to bottom, the - * alpha channel increases in opacity from left to right. - * - * 3 channels: linear combinations of, from the top-left corner clockwise, - * black, green, white, red. - * - * 4 channels: linear combinations of, from the top-left corner clockwise, - * transparent, red, green, blue. - * - * For color-mapped images a four channel color-map is used and if --tRNS is - * given the PNG file has a tRNS chunk, as follows: - * - * 1-bit: entry 0 is transparent-red, entry 1 is opaque-white - * 2-bit: entry 0: transparent-green - * entry 1: 40%-red - * entry 2: 80%-blue - * entry 3: opaque-white - * 4-bit: the 16 combinations of the 2-bit case - * 8-bit: the 256 combinations of the 4-bit case - * - * The palette always has 2^bit-depth entries and the tRNS chunk one fewer. The - * image is the 1-channel diamond, but using palette index, not luminosity. - * - * For formats other than color-mapped ones if --tRNS is specified a tRNS chunk - * is generated with all channels equal to the low bits of 0x0101. - * - * Image size is determined by the final pixel depth in bits, i.e. channels x - * bit-depth, as follows: - * - * 8 bits or less: 64x64 - * 16 bits: 256x256 - * More than 16 bits: 1024x1024 - * - * Row filtering is the libpng default but may be turned off (the 'none' filter - * is used on every row) with the --nofilters option. - * - * The images are not interlaced. - * - * If file-name is given then the PNG is written to that file, else it is - * written to stdout. Notice that stdout is not supported on systems where, by - * default, it assumes text output; this program makes no attempt to change the - * text mode of stdout! - * - * makepng --color= ... - * - * If --color is given then the whole image has that color, color-mapped images - * will have exactly one palette entry and all image files with be 16x16 in - * size. The color value is 1 to 4 decimal numbers as appropriate for the color - * type. - * - * makepng --small ... - * - * If --small is given the images are no larger than required to include every - * possible pixel value for the format. - * - * For formats with pixels 8 bits or fewer in size the images consist of a - * single row with 2^pixel-depth pixels, one of every possible value. - * - * For formats with 16-bit pixels a 256x256 image is generated containing every - * possible pixel value. - * - * For larger pixel sizes a 256x256 image is generated where the first row - * consists of each pixel that has identical byte values throughout the pixel - * followed by rows where the byte values differ within the pixel. - * - * In all cases the pixel values are arranged in such a way that the SUB and UP - * filters give byte sequences for maximal zlib compression. By default (if - * --nofilters is not given) the SUB filter is used on the first row and the UP - * filter on all following rows. - * - * The --small option is meant to provide good test-case coverage, however the - * images are not easy to examine visually. Without the --small option the - * images contain identical color values; the pixel values are adjusted - * according to the gamma encoding with no gamma encoding being interpreted as - * sRGB. - * - * LICENSING - * ========= - * - * This code is copyright of the authors, see the COPYRIGHT define above. The - * code is licensed as above, using the libpng license. The code generates - * images which are solely the product of the code; the options choose which of - * the many possibilities to generate. The images that result (but not the code - * which generates them) are licensed as defined here: - * - * IMPORTANT: the COPYRIGHT #define must contain ISO-Latin-1 characters, the - * IMAGE_LICENSING #define must contain UTF-8 characters. The 'copyright' - * symbol 0xA9U (\251) in ISO-Latin-1 encoding and 0xC20xA9 (\302\251) in UTF-8. - */ -#define IMAGE_LICENSING "Dedicated to the public domain per Creative Commons "\ - "license \"CC0 1.0\"; https://creativecommons.org/publicdomain/zero/1.0/" - -#include /* for offsetof */ -#include -#include -#include -#include -#include -#include -#include -#include - -#if defined(HAVE_CONFIG_H) && !defined(PNG_NO_CONFIG_H) -# include -#endif - -/* Define the following to use this test against your installed libpng, rather - * than the one being built here: - */ -#ifdef PNG_FREESTANDING_TESTS -# include -#else -# include "../../png.h" -#endif - -#include - -/* Work round for GCC complaints about casting a (double) function result to - * an unsigned: - */ -static unsigned int -flooru(double d) -{ - d = floor(d); - return (unsigned int)d; -} - -static png_byte -floorb(double d) -{ - d = floor(d); - return (png_byte)d; -} - -/* This structure is used for inserting extra chunks (the --insert argument, not - * documented above.) - */ -typedef struct chunk_insert -{ - struct chunk_insert *next; - void (*insert)(png_structp, png_infop, int, png_charpp); - int nparams; - png_charp parameters[1]; -} chunk_insert; - -static unsigned int -channels_of_type(int color_type) -{ - if (color_type & PNG_COLOR_MASK_PALETTE) - return 1; - - else - { - int channels = 1; - - if (color_type & PNG_COLOR_MASK_COLOR) - channels = 3; - - if (color_type & PNG_COLOR_MASK_ALPHA) - return channels + 1; - - else - return channels; - } -} - -static unsigned int -pixel_depth_of_type(int color_type, int bit_depth) -{ - return channels_of_type(color_type) * bit_depth; -} - -static unsigned int -image_size_of_type(int color_type, int bit_depth, unsigned int *colors, - int small) -{ - if (*colors) - return 16; - - else - { - int pixel_depth = pixel_depth_of_type(color_type, bit_depth); - - if (small) - { - if (pixel_depth <= 8) /* there will be one row */ - return 1 << pixel_depth; - - else - return 256; - } - - else if (pixel_depth < 8) - return 64; - - else if (pixel_depth > 16) - return 1024; - - else - return 256; - } -} - -static void -set_color(png_colorp color, png_bytep trans, unsigned int red, - unsigned int green, unsigned int blue, unsigned int alpha, - png_const_bytep gamma_table) -{ - color->red = gamma_table[red]; - color->green = gamma_table[green]; - color->blue = gamma_table[blue]; - *trans = (png_byte)alpha; -} - -static int -generate_palette(png_colorp palette, png_bytep trans, int bit_depth, - png_const_bytep gamma_table, unsigned int *colors) -{ - /* - * 1-bit: entry 0 is transparent-red, entry 1 is opaque-white - * 2-bit: entry 0: transparent-green - * entry 1: 40%-red - * entry 2: 80%-blue - * entry 3: opaque-white - * 4-bit: the 16 combinations of the 2-bit case - * 8-bit: the 256 combinations of the 4-bit case - */ - switch (colors[0]) - { - default: - fprintf(stderr, "makepng: --colors=...: invalid count %u\n", - colors[0]); - exit(1); - - case 1: - set_color(palette+0, trans+0, colors[1], colors[1], colors[1], 255, - gamma_table); - return 1; - - case 2: - set_color(palette+0, trans+0, colors[1], colors[1], colors[1], - colors[2], gamma_table); - return 1; - - case 3: - set_color(palette+0, trans+0, colors[1], colors[2], colors[3], 255, - gamma_table); - return 1; - - case 4: - set_color(palette+0, trans+0, colors[1], colors[2], colors[3], - colors[4], gamma_table); - return 1; - - case 0: - if (bit_depth == 1) - { - set_color(palette+0, trans+0, 255, 0, 0, 0, gamma_table); - set_color(palette+1, trans+1, 255, 255, 255, 255, gamma_table); - return 2; - } - - else - { - unsigned int size = 1U << (bit_depth/2); /* 2, 4 or 16 */ - unsigned int x, y; - volatile unsigned int ip = 0; - - for (x=0; x> 3; - - if (offset < rowbytes && (bit_depth < 16 || offset+1 < rowbytes)) - { - row += offset; - - switch (bit_depth) - { - case 1: - case 2: - case 4: - /* Don't gamma correct - values get smashed */ - { - unsigned int shift = (8 - bit_depth) - (x & 0x7U); - - mask <<= shift; - value = (value << shift) & mask; - *row = (png_byte)((*row & ~mask) | value); - } - return; - - default: - fprintf(stderr, "makepng: bad bit depth (internal error)\n"); - exit(1); - - case 16: - value = flooru(65535*pow(value/65535.,conv)+.5); - *row++ = (png_byte)(value >> 8); - *row = (png_byte)value; - return; - - case 8: - *row = gamma_table[value]; - return; - } - } - - else - { - fprintf(stderr, "makepng: row buffer overflow (internal error)\n"); - exit(1); - } - } - - else - { - fprintf(stderr, "makepng: component overflow (internal error)\n"); - exit(1); - } -} - -static int /* filter mask for row */ -generate_row(png_bytep row, size_t rowbytes, unsigned int y, int color_type, - int bit_depth, png_const_bytep gamma_table, double conv, - unsigned int *colors, int small) -{ - int filters = 0; /* file *MASK*, 0 means the default, not NONE */ - png_uint_32 size_max = - image_size_of_type(color_type, bit_depth, colors, small)-1; - png_uint_32 depth_max = (1U << bit_depth)-1; /* up to 65536 */ - - if (colors[0] == 0) if (small) - { - unsigned int pixel_depth = pixel_depth_of_type(color_type, bit_depth); - - /* For pixel depths less than 16 generate a single row containing all the - * possible pixel values. For 16 generate all 65536 byte pair - * combinations in a 256x256 pixel array. - */ - switch (pixel_depth) - { - case 1: - assert(y == 0 && rowbytes == 1 && size_max == 1); - row[0] = 0x6CU; /* binary: 01101100, only top 2 bits used */ - filters = PNG_FILTER_NONE; - break; - - case 2: - assert(y == 0 && rowbytes == 1 && size_max == 3); - row[0] = 0x1BU; /* binary 00011011, all bits used */ - filters = PNG_FILTER_NONE; - break; - - case 4: - assert(y == 0 && rowbytes == 8 && size_max == 15); - row[0] = 0x01U; - row[1] = 0x23U; /* SUB gives 0x22U for all following bytes */ - row[2] = 0x45U; - row[3] = 0x67U; - row[4] = 0x89U; - row[5] = 0xABU; - row[6] = 0xCDU; - row[7] = 0xEFU; - filters = PNG_FILTER_SUB; - break; - - case 8: - /* The row will have all the pixel values in order starting with - * '1', the SUB filter will change every byte into '1' (including - * the last, which generates pixel value '0'). Since the SUB filter - * has value 1 this should result in maximum compression. - */ - assert(y == 0 && rowbytes == 256 && size_max == 255); - for (;;) - { - row[size_max] = 0xFFU & (size_max+1); - if (size_max == 0) - break; - --size_max; - } - filters = PNG_FILTER_SUB; - break; - - case 16: - /* Rows are generated such that each row has a constant difference - * between the first and second byte of each pixel and so that the - * difference increases by 1 at each row. The rows start with the - * first byte value of 0 and the value increases to 255 across the - * row. - * - * The difference starts at 1, so the first row is: - * - * 0 1 1 2 2 3 3 4 ... 254 255 255 0 - * - * This means that running the SUB filter on the first row produces: - * - * [SUB==1] 0 1 0 1 0 1... - * - * Then the difference is 2 on the next row, giving: - * - * 0 2 1 3 2 4 3 5 ... 254 0 255 1 - * - * When the UP filter is run on this libpng produces: - * - * [UP ==2] 0 1 0 1 0 1... - * - * And so on for all the remain rows to the final two * rows: - * - * row 254: 0 255 1 0 2 1 3 2 4 3 ... 254 253 255 254 - * row 255: 0 0 1 1 2 2 3 3 4 4 ... 254 254 255 255 - */ - assert(rowbytes == 512 && size_max == 255); - for (;;) - { - row[2*size_max ] = 0xFFU & size_max; - row[2*size_max+1] = 0xFFU & (size_max+y+1); - if (size_max == 0) - break; - --size_max; - } - /* The first row must include PNG_FILTER_UP so that libpng knows we - * need to keep it for the following row: - */ - filters = (y == 0 ? PNG_FILTER_SUB+PNG_FILTER_UP : PNG_FILTER_UP); - break; - - case 24: - case 32: - case 48: - case 64: - /* The rows are filled by an alogorithm similar to the above, in the - * first row pixel bytes are all equal, increasing from 0 by 1 for - * each pixel. In the second row the bytes within a pixel are - * incremented 1,3,5,7,... from the previous row byte. Using an odd - * number ensures all the possible byte values are used. - */ - assert(size_max == 255 && rowbytes == 256*(pixel_depth>>3)); - pixel_depth >>= 3; /* now in bytes */ - while (rowbytes > 0) - { - const size_t pixel_index = --rowbytes/pixel_depth; - - if (y == 0) - row[rowbytes] = 0xFFU & pixel_index; - - else - { - const size_t byte_offset = - rowbytes - pixel_index * pixel_depth; - - row[rowbytes] = - 0xFFU & (pixel_index + (byte_offset * 2*y) + 1); - } - } - filters = (y == 0 ? PNG_FILTER_SUB+PNG_FILTER_UP : PNG_FILTER_UP); - break; - - default: - assert(0/*NOT REACHED*/); - } - } - - else switch (channels_of_type(color_type)) - { - /* 1 channel: a square image with a diamond, the least luminous colors are on - * the edge of the image, the most luminous in the center. - */ - case 1: - { - png_uint_32 x; - png_uint_32 base = 2*size_max - abs(2*y-size_max); - - for (x=0; x<=size_max; ++x) - { - png_uint_32 luma = base - abs(2*x-size_max); - - /* 'luma' is now in the range 0..2*size_max, we need - * 0..depth_max - */ - luma = (luma*depth_max + size_max) / (2*size_max); - set_value(row, rowbytes, x, bit_depth, luma, gamma_table, conv); - } - } - break; - - /* 2 channels: the color channel increases in luminosity from top to bottom, - * the alpha channel increases in opacity from left to right. - */ - case 2: - { - png_uint_32 alpha = (depth_max * y * 2 + size_max) / (2 * size_max); - png_uint_32 x; - - for (x=0; x<=size_max; ++x) - { - set_value(row, rowbytes, 2*x, bit_depth, - (depth_max * x * 2 + size_max) / (2 * size_max), gamma_table, - conv); - set_value(row, rowbytes, 2*x+1, bit_depth, alpha, gamma_table, - conv); - } - } - break; - - /* 3 channels: linear combinations of, from the top-left corner clockwise, - * black, green, white, red. - */ - case 3: - { - /* x0: the black->red scale (the value of the red component) at the - * start of the row (blue and green are 0). - * x1: the green->white scale (the value of the red and blue - * components at the end of the row; green is depth_max). - */ - png_uint_32 Y = (depth_max * y * 2 + size_max) / (2 * size_max); - png_uint_32 x; - - /* Interpolate x/depth_max from start to end: - * - * start end difference - * red: Y Y 0 - * green: 0 depth_max depth_max - * blue: 0 Y Y - */ - for (x=0; x<=size_max; ++x) - { - set_value(row, rowbytes, 3*x+0, bit_depth, /* red */ Y, - gamma_table, conv); - set_value(row, rowbytes, 3*x+1, bit_depth, /* green */ - (depth_max * x * 2 + size_max) / (2 * size_max), - gamma_table, conv); - set_value(row, rowbytes, 3*x+2, bit_depth, /* blue */ - (Y * x * 2 + size_max) / (2 * size_max), - gamma_table, conv); - } - } - break; - - /* 4 channels: linear combinations of, from the top-left corner clockwise, - * transparent, red, green, blue. - */ - case 4: - { - /* x0: the transparent->blue scale (the value of the blue and alpha - * components) at the start of the row (red and green are 0). - * x1: the red->green scale (the value of the red and green - * components at the end of the row; blue is 0 and alpha is - * depth_max). - */ - png_uint_32 Y = (depth_max * y * 2 + size_max) / (2 * size_max); - png_uint_32 x; - - /* Interpolate x/depth_max from start to end: - * - * start end difference - * red: 0 depth_max-Y depth_max-Y - * green: 0 Y Y - * blue: Y 0 -Y - * alpha: Y depth_max depth_max-Y - */ - for (x=0; x<=size_max; ++x) - { - set_value(row, rowbytes, 4*x+0, bit_depth, /* red */ - ((depth_max-Y) * x * 2 + size_max) / (2 * size_max), - gamma_table, conv); - set_value(row, rowbytes, 4*x+1, bit_depth, /* green */ - (Y * x * 2 + size_max) / (2 * size_max), - gamma_table, conv); - set_value(row, rowbytes, 4*x+2, bit_depth, /* blue */ - Y - (Y * x * 2 + size_max) / (2 * size_max), - gamma_table, conv); - set_value(row, rowbytes, 4*x+3, bit_depth, /* alpha */ - Y + ((depth_max-Y) * x * 2 + size_max) / (2 * size_max), - gamma_table, conv); - } - } - break; - - default: - fprintf(stderr, "makepng: internal bad channel count\n"); - exit(2); - } - - else if (color_type & PNG_COLOR_MASK_PALETTE) - { - /* Palette with fixed color: the image rows are all 0 and the image width - * is 16. - */ - memset(row, 0, rowbytes); - } - - else if (colors[0] == channels_of_type(color_type)) - switch (channels_of_type(color_type)) - { - case 1: - { - png_uint_32 luma = colors[1]; - png_uint_32 x; - - for (x=0; x<=size_max; ++x) - set_value(row, rowbytes, x, bit_depth, luma, gamma_table, - conv); - } - break; - - case 2: - { - png_uint_32 luma = colors[1]; - png_uint_32 alpha = colors[2]; - png_uint_32 x; - - for (x=0; x 0 && gamma < 1000) - gamma = PNG_FP_1; - - if (gamma > 0) - real_gamma = gamma; - - { - unsigned int i; - - if (real_gamma == 45455) for (i=0; i<256; ++i) - { - gamma_table[i] = (png_byte)i; - conv = 1.; - } - - else - { - /* Convert 'i' from sRGB (45455) to real_gamma, this makes - * the images look the same regardless of the gAMA chunk. - */ - conv = real_gamma; - conv /= 45455; - - gamma_table[0] = 0; - - for (i=1; i<255; ++i) - gamma_table[i] = floorb(pow(i/255.,conv) * 255 + .5); - - gamma_table[255] = 255; - } - } - - png_set_IHDR(png_ptr, info_ptr, size, ysize, bit_depth, color_type, - PNG_INTERLACE_NONE, PNG_COMPRESSION_TYPE_BASE, PNG_FILTER_TYPE_BASE); - - if (color_type & PNG_COLOR_MASK_PALETTE) - { - int npalette; - png_color palette[256]; - png_byte trans[256]; - - npalette = generate_palette(palette, trans, bit_depth, gamma_table, - colors); - png_set_PLTE(png_ptr, info_ptr, palette, npalette); - - if (tRNS) - png_set_tRNS(png_ptr, info_ptr, trans, npalette-1, - NULL/*transparent color*/); - - /* Reset gamma_table to prevent the image rows being changed */ - for (npalette=0; npalette<256; ++npalette) - gamma_table[npalette] = (png_byte)npalette; - } - - else if (tRNS) - { - png_color_16 col; - - col.red = col.green = col.blue = col.gray = - 0x0101U & ((1U< 0) /* Else don't set color space information */ - { - png_set_gAMA_fixed(png_ptr, info_ptr, real_gamma); - - /* Just use the sRGB values here. */ - png_set_cHRM_fixed(png_ptr, info_ptr, - /* color x y */ - /* white */ 31270, 32900, - /* red */ 64000, 33000, - /* green */ 30000, 60000, - /* blue */ 15000, 6000 - ); - } - - /* Insert extra information. */ - while (insert != NULL) - { - insert->insert(png_ptr, info_ptr, insert->nparams, insert->parameters); - insert = insert->next; - } - - /* Write the file header. */ - png_write_info(png_ptr, info_ptr); - - /* Restrict the filters */ - png_set_filter(png_ptr, PNG_FILTER_TYPE_BASE, filters); - - { -# ifdef PNG_WRITE_INTERLACING_SUPPORTED - int passes = png_set_interlace_handling(png_ptr); -# else /* !WRITE_INTERLACING */ - int passes = 1; -# endif /* !WRITE_INTERLACING */ - int pass; - size_t rowbytes = png_get_rowbytes(png_ptr, info_ptr); - - row = malloc(rowbytes); - - if (row == NULL) - png_error(png_ptr, "OOM allocating row buffer"); - - for (pass = 0; pass < passes; ++pass) - { - unsigned int y; - - for (y=0; y 0) - { - /* Round up to a multiple of 4 here to allow an iCCP profile - * to be padded to a 4x boundary. - */ - png_bytep data = malloc((total+3)&~3); - - if (data != NULL) - { - size_t new_size = 0; - - for (;;) - { - ch = getc(fp); - if (ch == EOF) break; - data[new_size++] = (png_byte)ch; - } - - if (ferror(fp) || new_size != total) - { - perror("temporary file"); - fprintf(stderr, "temporary file read error\n"); - free(data); - } - - else - { - (void)fclose(fp); - *result = data; - return total; - } - } - - else - fprintf(stderr, "%s: out of memory loading file\n", name); - } - - else - fprintf(stderr, "%s: empty file\n", name); - } - } - } - - else - { - perror(name); - fprintf(stderr, "%s: open failed\n", name); - } - - fclose(fp); - } - - else - fprintf(stderr, "makepng: %s: could not open temporary file\n", name); - - exit(1); - return 0; -} - -static size_t -load_fake(png_charp param, png_bytepp profile) -{ - char *endptr = NULL; - uint64_t size = strtoull(param, &endptr, 0/*base*/); - - /* The 'fake' format is *[string] */ - if (endptr != NULL && *endptr == '*') - { - size_t len = strlen(++endptr); - size_t result = (size_t)size; - - if (len == 0) len = 1; /* capture the terminating '\0' */ - - /* Now repeat that string to fill 'size' bytes. */ - if (result == size && (*profile = malloc(result)) != NULL) - { - png_bytep out = *profile; - - if (len == 1) - memset(out, *endptr, result); - - else - { - while (size >= len) - { - memcpy(out, endptr, len); - out += len; - size -= len; - } - memcpy(out, endptr, size); - } - - return result; - } - - else - { - fprintf(stderr, "%s: size exceeds system limits\n", param); - exit(1); - } - } - - return 0; -} - -static void -check_param_count(int nparams, int expect) -{ - if (nparams != expect) - { - fprintf(stderr, "bad parameter count (internal error)\n"); - exit(1); - } -} - -static void -insert_iCCP(png_structp png_ptr, png_infop info_ptr, int nparams, - png_charpp params) -{ - png_bytep profile = NULL; - png_uint_32 proflen = 0; - int result; - - check_param_count(nparams, 2); - - switch (params[1][0]) - { - case '<': - { - size_t filelen = load_file(params[1]+1, &profile); - if (filelen > 0xfffffffc) /* Maximum profile length */ - { - fprintf(stderr, "%s: file too long (%lu) for an ICC profile\n", - params[1]+1, (unsigned long)filelen); - exit(1); - } - - proflen = (png_uint_32)filelen; - } - break; - - case '0': case '1': case '2': case '3': case '4': - case '5': case '6': case '7': case '8': case '9': - { - size_t fake_len = load_fake(params[1], &profile); - - if (fake_len > 0) /* else a simple parameter */ - { - if (fake_len > 0xffffffff) /* Maximum profile length */ - { - fprintf(stderr, - "%s: fake data too long (%lu) for an ICC profile\n", - params[1], (unsigned long)fake_len); - exit(1); - } - proflen = (png_uint_32)(fake_len & ~3U); - /* Always fix up the profile length. */ - png_save_uint_32(profile, proflen); - break; - } - } - - default: - fprintf(stderr, "--insert iCCP \"%s\": unrecognized\n", params[1]); - fprintf(stderr, " use '<' to read a file: \" 3) - { - png_uint_32 prof_header = png_get_uint_32(profile); - - if (prof_header != proflen) - { - fprintf(stderr, "--insert iCCP %s: profile length field wrong:\n", - params[1]); - fprintf(stderr, " actual %lu, recorded value %lu (corrected)\n", - (unsigned long)proflen, (unsigned long)prof_header); - png_save_uint_32(profile, proflen); - } - } - - if (result && profile != NULL && proflen >=4) - png_set_iCCP(png_ptr, info_ptr, params[0], PNG_COMPRESSION_TYPE_BASE, - profile, proflen); - - if (profile) - free(profile); - - if (!result) - exit(1); -} - -static void -clear_text(png_text *text, png_charp keyword) -{ - text->compression = -1; /* none */ - text->key = keyword; - text->text = NULL; - text->text_length = 0; /* libpng calculates this */ - text->itxt_length = 0; /* libpng calculates this */ - text->lang = NULL; - text->lang_key = NULL; -} - -static void -set_text(png_structp png_ptr, png_infop info_ptr, png_textp text, - png_charp param) -{ - switch (param[0]) - { - case '<': - { - png_bytep file = NULL; - - text->text_length = load_file(param+1, &file); - text->text = (png_charp)file; - } - break; - - case '0': case '1': case '2': case '3': case '4': - case '5': case '6': case '7': case '8': case '9': - { - png_bytep data = NULL; - size_t fake_len = load_fake(param, &data); - - if (fake_len > 0) /* else a simple parameter */ - { - text->text_length = fake_len; - text->text = (png_charp)data; - break; - } - } - - default: - text->text = param; - break; - } - - png_set_text(png_ptr, info_ptr, text, 1); - - if (text->text != param) - free(text->text); -} - -static void -insert_tEXt(png_structp png_ptr, png_infop info_ptr, int nparams, - png_charpp params) -{ - png_text text; - - check_param_count(nparams, 2); - clear_text(&text, params[0]); - set_text(png_ptr, info_ptr, &text, params[1]); -} - -static void -insert_zTXt(png_structp png_ptr, png_infop info_ptr, int nparams, - png_charpp params) -{ - png_text text; - - check_param_count(nparams, 2); - clear_text(&text, params[0]); - text.compression = 0; /* deflate */ - set_text(png_ptr, info_ptr, &text, params[1]); -} - -static void -insert_iTXt(png_structp png_ptr, png_infop info_ptr, int nparams, - png_charpp params) -{ - png_text text; - - check_param_count(nparams, 4); - clear_text(&text, params[0]); - text.compression = 2; /* iTXt + deflate */ - text.lang = params[1];/* language tag */ - text.lang_key = params[2]; /* translated keyword */ - set_text(png_ptr, info_ptr, &text, params[3]); -} - -static void -insert_hIST(png_structp png_ptr, png_infop info_ptr, int nparams, - png_charpp params) -{ - int i; - png_uint_16 freq[256]; - - /* libpng takes the count from the PLTE count; we don't check it here but we - * do set the array to 0 for unspecified entries. - */ - memset(freq, 0, sizeof freq); - for (i=0; inext = NULL; - cip->insert = insert; - cip->nparams = nparams; - for (i=0; iparameters[i] = list[i]; - - return cip; -} - -static chunk_insert * -find_insert(png_const_charp what, png_charp param) -{ - png_uint_32 chunk = 0; - png_charp parameter_list[1024]; - int i, nparams; - - /* Assemble the chunk name */ - for (i=0; i<4; ++i) - { - char ch = what[i]; - - if ((ch >= 65 && ch <= 90) || (ch >= 97 && ch <= 122)) - chunk = (chunk << 8) + what[i]; - - else - break; - } - - if (i < 4 || what[4] != 0) - { - fprintf(stderr, "makepng --insert \"%s\": invalid chunk name\n", what); - exit(1); - } - - /* Assemble the parameter list. */ - nparams = find_parameters(what, param, parameter_list, 1024); - -# define CHUNK(a,b,c,d) (((a)<<24)+((b)<<16)+((c)<<8)+(d)) - - switch (chunk) - { - case CHUNK(105,67,67,80): /* iCCP */ - if (nparams == 2) - return make_insert(what, insert_iCCP, nparams, parameter_list); - break; - - case CHUNK(116,69,88,116): /* tEXt */ - if (nparams == 2) - return make_insert(what, insert_tEXt, nparams, parameter_list); - break; - - case CHUNK(122,84,88,116): /* zTXt */ - if (nparams == 2) - return make_insert(what, insert_zTXt, nparams, parameter_list); - break; - - case CHUNK(105,84,88,116): /* iTXt */ - if (nparams == 4) - return make_insert(what, insert_iTXt, nparams, parameter_list); - break; - - case CHUNK(104,73,83,84): /* hIST */ - if (nparams <= 256) - return make_insert(what, insert_hIST, nparams, parameter_list); - break; - - case CHUNK(115,66,73,84): /* sBIT */ - if (nparams <= 4) - return make_insert(what, insert_sBIT, nparams, parameter_list); - break; - -#if 0 - case CHUNK(115,80,76,84): /* sPLT */ - return make_insert(what, insert_sPLT, nparams, parameter_list); -#endif - - default: - fprintf(stderr, "makepng --insert \"%s\": unrecognized chunk name\n", - what); - exit(1); - } - - bad_parameter_count(what, nparams); - return NULL; -} - -/* This is necessary because libpng expects writeable strings for things like - * text chunks (maybe this should be fixed...) - */ -static png_charp -strstash(png_const_charp foo) -{ - /* The program indicates a memory allocation error by crashing, this is by - * design. - */ - if (foo != NULL) - { - png_charp bar = malloc(strlen(foo)+1); - return strcpy(bar, foo); - } - - return NULL; -} - -static png_charp -strstash_list(const png_const_charp *text) -{ - size_t foo = 0; - png_charp result, bar; - const png_const_charp *line = text; - - while (*line != NULL) - foo += strlen(*line++); - - result = bar = malloc(foo+1); - - line = text; - while (*line != NULL) - { - foo = strlen(*line); - memcpy(bar, *line++, foo); - bar += foo; - } - - *bar = 0; - return result; -} - -/* These are used to insert Copyright and Licence fields, they allow the text to - * have \n unlike the --insert option. - */ -static chunk_insert * -add_tEXt(const char *key, const png_const_charp *text) -{ - static char what[5] = { 116, 69, 88, 116, 0 }; - png_charp parameter_list[3]; - - parameter_list[0] = strstash(key); - parameter_list[1] = strstash_list(text); - parameter_list[2] = NULL; - - return make_insert(what, insert_tEXt, 2, parameter_list); -} - -static chunk_insert * -add_iTXt(const char *key, const char *language, const char *language_key, - const png_const_charp *text) -{ - static char what[5] = { 105, 84, 88, 116, 0 }; - png_charp parameter_list[5]; - - parameter_list[0] = strstash(key); - parameter_list[1] = strstash(language); - parameter_list[2] = strstash(language_key); - parameter_list[3] = strstash_list(text); - parameter_list[4] = NULL; - - return make_insert(what, insert_iTXt, 4, parameter_list); -} - -/* This is a not-very-good parser for a sequence of numbers (including 0). It - * doesn't accept some apparently valid things, but it accepts all the sensible - * combinations. - */ -static void -parse_color(char *arg, unsigned int *colors) -{ - unsigned int ncolors = 0; - - while (*arg && ncolors < 4) - { - char *ep = arg; - - unsigned long ul = strtoul(arg, &ep, 0); - - if (ul > 65535) - { - fprintf(stderr, "makepng --color=...'%s': too big\n", arg); - exit(1); - } - - if (ep == arg) - { - fprintf(stderr, "makepng --color=...'%s': not a valid color\n", arg); - exit(1); - } - - if (*ep) ++ep; /* skip a separator */ - arg = ep; - - colors[++ncolors] = (unsigned int)ul; /* checked above */ - } - - if (*arg) - { - fprintf(stderr, "makepng --color=...'%s': too many values\n", arg); - exit(1); - } - - *colors = ncolors; -} - -int -main(int argc, char **argv) -{ - FILE *fp = stdout; - const char *file_name = NULL; - int color_type = 8; /* invalid */ - int bit_depth = 32; /* invalid */ - int small = 0; /* make full size images */ - int tRNS = 0; /* don't output a tRNS chunk */ - unsigned int colors[5]; - unsigned int filters = PNG_ALL_FILTERS; - png_fixed_point gamma = 0; /* not set */ - chunk_insert *head_insert = NULL; - chunk_insert **insert_ptr = &head_insert; - - memset(colors, 0, sizeof colors); - - while (--argc > 0) - { - char *arg = *++argv; - - if (strcmp(arg, "--small") == 0) - { - small = 1; - continue; - } - - if (strcmp(arg, "--tRNS") == 0) - { - tRNS = 1; - continue; - } - - if (strcmp(arg, "--sRGB") == 0) - { - gamma = PNG_DEFAULT_sRGB; - continue; - } - - if (strcmp(arg, "--linear") == 0) - { - gamma = PNG_FP_1; - continue; - } - - if (strcmp(arg, "--1.8") == 0) - { - gamma = PNG_GAMMA_MAC_18; - continue; - } - - if (strcmp(arg, "--nofilters") == 0) - { - filters = PNG_FILTER_NONE; - continue; - } - - if (strncmp(arg, "--color=", 8) == 0) - { - parse_color(arg+8, colors); - continue; - } - - if (argc >= 3 && strcmp(arg, "--insert") == 0) - { - png_const_charp what = *++argv; - png_charp param = *++argv; - chunk_insert *new_insert; - - argc -= 2; - - new_insert = find_insert(what, param); - - if (new_insert != NULL) - { - *insert_ptr = new_insert; - insert_ptr = &new_insert->next; - } - - continue; - } - - if (arg[0] == '-') - { - fprintf(stderr, "makepng: %s: invalid option\n", arg); - exit(1); - } - - if (strcmp(arg, "palette") == 0) - { - color_type = PNG_COLOR_TYPE_PALETTE; - continue; - } - - if (strncmp(arg, "gray", 4) == 0) - { - if (arg[4] == 0) - { - color_type = PNG_COLOR_TYPE_GRAY; - continue; - } - - else if (strcmp(arg+4, "a") == 0 || - strcmp(arg+4, "alpha") == 0 || - strcmp(arg+4, "-alpha") == 0) - { - color_type = PNG_COLOR_TYPE_GRAY_ALPHA; - continue; - } - } - - if (strncmp(arg, "rgb", 3) == 0) - { - if (arg[3] == 0) - { - color_type = PNG_COLOR_TYPE_RGB; - continue; - } - - else if (strcmp(arg+3, "a") == 0 || - strcmp(arg+3, "alpha") == 0 || - strcmp(arg+3, "-alpha") == 0) - { - color_type = PNG_COLOR_TYPE_RGB_ALPHA; - continue; - } - } - - if (color_type == 8 && isdigit(arg[0])) - { - color_type = atoi(arg); - if (color_type < 0 || color_type > 6 || color_type == 1 || - color_type == 5) - { - fprintf(stderr, "makepng: %s: not a valid color type\n", arg); - exit(1); - } - - continue; - } - - if (bit_depth == 32 && isdigit(arg[0])) - { - bit_depth = atoi(arg); - if (bit_depth <= 0 || bit_depth > 16 || - (bit_depth & -bit_depth) != bit_depth) - { - fprintf(stderr, "makepng: %s: not a valid bit depth\n", arg); - exit(1); - } - - continue; - } - - if (argc == 1) /* It's the file name */ - { - fp = fopen(arg, "wb"); - if (fp == NULL) - { - fprintf(stderr, "%s: %s: could not open\n", arg, strerror(errno)); - exit(1); - } - - file_name = arg; - continue; - } - - fprintf(stderr, "makepng: %s: unknown argument\n", arg); - exit(1); - } /* argument while loop */ - - if (color_type == 8 || bit_depth == 32) - { - fprintf(stderr, "usage: makepng [--small] [--sRGB|--linear|--1.8] " - "[--color=...] color-type bit-depth [file-name]\n" - " Make a test PNG file, by default writes to stdout.\n" - " Other options are available, UTSL.\n"); - exit(1); - } - - /* Check the colors */ - { - unsigned int lim = (color_type == PNG_COLOR_TYPE_PALETTE ? 255U : - (1U< lim) - { - fprintf(stderr, "makepng: --color=...: %u out of range [0..%u]\n", - colors[i], lim); - exit(1); - } - } - - /* small and colors are incomparible (will probably crash if both are used at - * the same time!) - */ - if (small && colors[0] != 0) - { - fprintf(stderr, "makepng: --color --small: only one at a time!\n"); - exit(1); - } - - /* Restrict the filters for more speed to those we know are used for the - * generated images. - */ - if (filters == PNG_ALL_FILTERS && !small/*small provides defaults*/) - { - if ((color_type & PNG_COLOR_MASK_PALETTE) != 0 || bit_depth < 8) - filters = PNG_FILTER_NONE; - - else if (color_type & PNG_COLOR_MASK_COLOR) /* rgb */ - { - if (bit_depth == 8) - filters &= ~(PNG_FILTER_NONE | PNG_FILTER_AVG); - - else - filters = PNG_FILTER_SUB | PNG_FILTER_PAETH; - } - - else /* gray 8 or 16-bit */ - filters &= ~PNG_FILTER_NONE; - } - - /* Insert standard copyright and licence text. */ - { - static png_const_charp copyright[] = - { - COPYRIGHT, /* ISO-Latin-1 */ - NULL - }; - static png_const_charp licensing[] = - { - IMAGE_LICENSING, /* UTF-8 */ - NULL - }; - - chunk_insert *new_insert; - - new_insert = add_tEXt("Copyright", copyright); - if (new_insert != NULL) - { - *insert_ptr = new_insert; - insert_ptr = &new_insert->next; - } - - new_insert = add_iTXt("Licensing", "en", NULL, licensing); - if (new_insert != NULL) - { - *insert_ptr = new_insert; - insert_ptr = &new_insert->next; - } - } - - { - int ret = write_png(&file_name, fp, color_type, bit_depth, gamma, - head_insert, filters, colors, small, tRNS); - - if (ret != 0 && file_name != NULL) - remove(file_name); - - return ret; - } -} diff --git a/contrib/libtests/pngimage.c b/contrib/libtests/pngimage.c deleted file mode 100644 index f130c043d..000000000 --- a/contrib/libtests/pngimage.c +++ /dev/null @@ -1,1712 +0,0 @@ -/* pngimage.c - * - * Copyright (c) 2015,2016 John Cunningham Bowler - * - * Last changed in libpng 1.6.24 [August 4, 2016] - * - * This code is released under the libpng license. - * For conditions of distribution and use, see the disclaimer - * and license in png.h - * - * Test the png_read_png and png_write_png interfaces. Given a PNG file load it - * using png_read_png and then write with png_write_png. Test all possible - * transforms. - */ -#include -#include -#include -#include -#include -#include - -#if defined(HAVE_CONFIG_H) && !defined(PNG_NO_CONFIG_H) -# include -#endif - -/* Define the following to use this test against your installed libpng, rather - * than the one being built here: - */ -#ifdef PNG_FREESTANDING_TESTS -# include -#else -# include "../../png.h" -#endif - -#ifndef PNG_SETJMP_SUPPORTED -# include /* because png.h did *not* include this */ -#endif - -/* 1.6.1 added support for the configure test harness, which uses 77 to indicate - * a skipped test, in earlier versions we need to succeed on a skipped test, so: - */ -#if PNG_LIBPNG_VER >= 10601 && defined(HAVE_CONFIG_H) -# define SKIP 77 -#else -# define SKIP 0 -#endif - -#if PNG_LIBPNG_VER < 10700 - /* READ_PNG and WRITE_PNG were not defined, so: */ -# ifdef PNG_INFO_IMAGE_SUPPORTED -# ifdef PNG_SEQUENTIAL_READ_SUPPORTED -# define PNG_READ_PNG_SUPPORTED -# endif /* SEQUENTIAL_READ */ -# ifdef PNG_WRITE_SUPPORTED -# define PNG_WRITE_PNG_SUPPORTED -# endif /* WRITE */ -# endif /* INFO_IMAGE */ -#endif /* pre 1.7.0 */ - -#ifdef PNG_READ_PNG_SUPPORTED -/* If a transform is valid on both read and write this implies that if the - * transform is applied to read it must also be applied on write to produce - * meaningful data. This is because these transforms when performed on read - * produce data with a memory format that does not correspond to a PNG format. - * - * Most of these transforms are invertible; after applying the transform on - * write the result is the original PNG data that would have would have been - * read if no transform were applied. - * - * The exception is _SHIFT, which destroys the low order bits marked as not - * significant in a PNG with the sBIT chunk. - * - * The following table lists, for each transform, the conditions under which it - * is expected to do anything. Conditions are defined as follows: - * - * 1) Color mask bits required - simply a mask to AND with color_type; one of - * these must be present for the transform to fire, except that 0 means - * 'always'. - * 2) Color mask bits which must be absent - another mask - none of these must - * be present. - * 3) Bit depths - a mask of component bit depths for the transform to fire. - * 4) 'read' - the transform works in png_read_png. - * 5) 'write' - the transform works in png_write_png. - * 6) PNG_INFO_chunk; a mask of the chunks that must be present for the - * transform to fire. All must be present - the requirement is that - * png_get_valid() & mask == mask, so if mask is 0 there is no requirement. - * - * The condition refers to the original image state - if multiple transforms are - * used together it is possible to cause a transform that wouldn't fire on the - * original image to fire. - */ -static struct transform_info -{ - const char *name; - int transform; - png_uint_32 valid_chunks; -# define CHUNK_NONE 0 -# define CHUNK_sBIT PNG_INFO_sBIT -# define CHUNK_tRNS PNG_INFO_tRNS - png_byte color_mask_required; - png_byte color_mask_absent; -# define COLOR_MASK_X 0 -# define COLOR_MASK_P PNG_COLOR_MASK_PALETTE -# define COLOR_MASK_C PNG_COLOR_MASK_COLOR -# define COLOR_MASK_A PNG_COLOR_MASK_ALPHA -# define COLOR_MASK_ALL (PALETTE+COLOR+ALPHA) /* absent = gray, no alpha */ - png_byte bit_depths; -# define BD_ALL (1 + 2 + 4 + 8 + 16) -# define BD_PAL (1 + 2 + 4 + 8) -# define BD_LOW (1 + 2 + 4) -# define BD_16 16 -# define BD_TRUE (8+16) /* i.e. true-color depths */ - png_byte when; -# define TRANSFORM_R 1 -# define TRANSFORM_W 2 -# define TRANSFORM_RW 3 - png_byte tested; /* the transform was tested somewhere */ -} transform_info[] = -{ - /* List ALL the PNG_TRANSFORM_ macros here. Check for support using the READ - * macros; even if the transform is supported on write it cannot be tested - * without the read support. - */ -# define T(name,chunk,cm_required,cm_absent,bd,when)\ - { #name, PNG_TRANSFORM_ ## name, CHUNK_ ## chunk,\ - COLOR_MASK_ ## cm_required, COLOR_MASK_ ## cm_absent, BD_ ## bd,\ - TRANSFORM_ ## when, 0/*!tested*/ } - -#ifdef PNG_READ_STRIP_16_TO_8_SUPPORTED - T(STRIP_16, NONE, X, X, 16, R), - /* drops the bottom 8 bits when bit depth is 16 */ -#endif -#ifdef PNG_READ_STRIP_ALPHA_SUPPORTED - T(STRIP_ALPHA, NONE, A, X, ALL, R), - /* removes the alpha channel if present */ -#endif -#ifdef PNG_WRITE_PACK_SUPPORTED -# define TRANSFORM_RW_PACK TRANSFORM_RW -#else -# define TRANSFORM_RW_PACK TRANSFORM_R -#endif -#ifdef PNG_READ_PACK_SUPPORTED - T(PACKING, NONE, X, X, LOW, RW_PACK), - /* unpacks low-bit-depth components into 1 byte per component on read, - * reverses this on write. - */ -#endif -#ifdef PNG_WRITE_PACKSWAP_SUPPORTED -# define TRANSFORM_RW_PACKSWAP TRANSFORM_RW -#else -# define TRANSFORM_RW_PACKSWAP TRANSFORM_R -#endif -#ifdef PNG_READ_PACKSWAP_SUPPORTED - T(PACKSWAP, NONE, X, X, LOW, RW_PACKSWAP), - /* reverses the order of low-bit-depth components packed into a byte */ -#endif -#ifdef PNG_READ_EXPAND_SUPPORTED - T(EXPAND, NONE, P, X, ALL, R), - /* expands PLTE PNG files to RGB (no tRNS) or RGBA (tRNS) * - * Note that the 'EXPAND' transform does lots of different things: */ - T(EXPAND, NONE, X, C, ALL, R), - /* expands grayscale PNG files to RGB, or RGBA */ - T(EXPAND, tRNS, X, A, ALL, R), - /* expands the tRNS chunk in files without alpha */ -#endif -#ifdef PNG_WRITE_INVERT_SUPPORTED -# define TRANSFORM_RW_INVERT TRANSFORM_RW -#else -# define TRANSFORM_RW_INVERT TRANSFORM_R -#endif -#ifdef PNG_READ_INVERT_SUPPORTED - T(INVERT_MONO, NONE, X, C, ALL, RW_INVERT), - /* converts gray-scale components to 1..0 from 0..1 */ -#endif -#ifdef PNG_WRITE_SHIFT_SUPPORTED -# define TRANSFORM_RW_SHIFT TRANSFORM_RW -#else -# define TRANSFORM_RW_SHIFT TRANSFORM_R -#endif -#ifdef PNG_READ_SHIFT_SUPPORTED - T(SHIFT, sBIT, X, X, ALL, RW_SHIFT), - /* reduces component values to the original range based on the sBIT chunk, - * this is only partially reversible - the low bits are lost and cannot be - * recovered on write. In fact write code replicates the bits to generate - * new low-order bits. - */ -#endif -#ifdef PNG_WRITE_BGR_SUPPORTED -# define TRANSFORM_RW_BGR TRANSFORM_RW -#else -# define TRANSFORM_RW_BGR TRANSFORM_R -#endif -#ifdef PNG_READ_BGR_SUPPORTED - T(BGR, NONE, C, P, TRUE, RW_BGR), - /* reverses the rgb component values of true-color pixels */ -#endif -#ifdef PNG_WRITE_SWAP_ALPHA_SUPPORTED -# define TRANSFORM_RW_SWAP_ALPHA TRANSFORM_RW -#else -# define TRANSFORM_RW_SWAP_ALPHA TRANSFORM_R -#endif -#ifdef PNG_READ_SWAP_ALPHA_SUPPORTED - T(SWAP_ALPHA, NONE, A, X, TRUE, RW_SWAP_ALPHA), - /* swaps the alpha channel of RGBA or GA pixels to the front - ARGB or - * AG, on write reverses the process. - */ -#endif -#ifdef PNG_WRITE_SWAP_SUPPORTED -# define TRANSFORM_RW_SWAP TRANSFORM_RW -#else -# define TRANSFORM_RW_SWAP TRANSFORM_R -#endif -#ifdef PNG_READ_SWAP_SUPPORTED - T(SWAP_ENDIAN, NONE, X, P, 16, RW_SWAP), - /* byte-swaps 16-bit component values */ -#endif -#ifdef PNG_WRITE_INVERT_ALPHA_SUPPORTED -# define TRANSFORM_RW_INVERT_ALPHA TRANSFORM_RW -#else -# define TRANSFORM_RW_INVERT_ALPHA TRANSFORM_R -#endif -#ifdef PNG_READ_INVERT_ALPHA_SUPPORTED - T(INVERT_ALPHA, NONE, A, X, TRUE, RW_INVERT_ALPHA), - /* converts an alpha channel from 0..1 to 1..0 */ -#endif -#ifdef PNG_WRITE_FILLER_SUPPORTED - T(STRIP_FILLER_BEFORE, NONE, A, P, TRUE, W), /* 'A' for a filler! */ - /* on write skips a leading filler channel; testing requires data with a - * filler channel so this is produced from RGBA or GA images by removing - * the 'alpha' flag from the color type in place. - */ - T(STRIP_FILLER_AFTER, NONE, A, P, TRUE, W), - /* on write strips a trailing filler channel */ -#endif -#ifdef PNG_READ_GRAY_TO_RGB_SUPPORTED - T(GRAY_TO_RGB, NONE, X, C, ALL, R), - /* expands grayscale images to RGB, also causes the palette part of - * 'EXPAND' to happen. Low bit depth grayscale images are expanded to - * 8-bits per component and no attempt is made to convert the image to a - * palette image. While this transform is partially reversible - * png_write_png does not currently support this. - */ - T(GRAY_TO_RGB, NONE, P, X, ALL, R), - /* The 'palette' side effect mentioned above; a bit bogus but this is the - * way the libpng code works. - */ -#endif -#ifdef PNG_READ_EXPAND_16_SUPPORTED - T(EXPAND_16, NONE, X, X, PAL, R), - /* expands images to 16-bits per component, as a side effect expands - * palette images to RGB and expands the tRNS chunk if present, so it can - * modify 16-bit per component images as well: - */ - T(EXPAND_16, tRNS, X, A, 16, R), - /* side effect of EXPAND_16 - expands the tRNS chunk in an RGB or G 16-bit - * image. - */ -#endif -#ifdef PNG_READ_SCALE_16_TO_8_SUPPORTED - T(SCALE_16, NONE, X, X, 16, R), - /* scales 16-bit components to 8-bits. */ -#endif - - { NULL /*name*/, 0, 0, 0, 0, 0, 0, 0/*!tested*/ } - -#undef T -}; - -#define ARRAY_SIZE(a) ((sizeof a)/(sizeof a[0])) -#define TTABLE_SIZE ARRAY_SIZE(transform_info) - -/* Some combinations of options that should be reversible are not; these cases - * are bugs. - */ -static int known_bad_combos[][2] = -{ - /* problem, antidote */ - { PNG_TRANSFORM_SHIFT | PNG_TRANSFORM_INVERT_ALPHA, 0/*antidote*/ } -}; - -static int -is_combo(int transforms) -{ - return transforms & (transforms-1); /* non-zero if more than one set bit */ -} - -static int -first_transform(int transforms) -{ - return transforms & -transforms; /* lowest set bit */ -} - -static int -is_bad_combo(int transforms) -{ - unsigned int i; - - for (i=0; ifirst.next = NULL; - buffer->last = NULL; - buffer->current = NULL; -} - -static void -buffer_destroy_list(struct buffer_list *list) -{ - if (list != NULL) - { - struct buffer_list *next = list->next; - DELETE(list); - buffer_destroy_list(next); - } -} - -static void -buffer_destroy(struct buffer *buffer) -{ - struct buffer_list *list = buffer->first.next; - buffer_init(buffer); - buffer_destroy_list(list); -} - -#ifdef PNG_WRITE_PNG_SUPPORTED -static void -buffer_start_write(struct buffer *buffer) -{ - buffer->last = &buffer->first; - buffer->end_count = 0; - buffer->current = NULL; -} -#endif - -static void -buffer_start_read(struct buffer *buffer) -{ - buffer->current = &buffer->first; - buffer->read_count = 0; -} - -#ifdef ENOMEM /* required by POSIX 1003.1 */ -# define MEMORY ENOMEM -#else -# define MEMORY ERANGE /* required by ANSI-C */ -#endif -static struct buffer * -get_buffer(png_structp pp) - /* Used from libpng callbacks to get the current buffer */ -{ - return (struct buffer*)png_get_io_ptr(pp); -} - -static struct buffer_list * -buffer_extend(struct buffer_list *current) -{ - struct buffer_list *add; - - assert(current->next == NULL); - - add = NEW(struct buffer_list); - if (add == NULL) - return NULL; - - add->next = NULL; - current->next = add; - - return add; -} - -/* Load a buffer from a file; does the equivalent of buffer_start_write. On a - * read error returns an errno value, else returns 0. - */ -static int -buffer_from_file(struct buffer *buffer, FILE *fp) -{ - struct buffer_list *last = &buffer->first; - size_t count = 0; - - for (;;) - { - size_t r = fread(last->buffer+count, 1/*size*/, - (sizeof last->buffer)-count, fp); - - if (r > 0) - { - count += r; - - if (count >= sizeof last->buffer) - { - assert(count == sizeof last->buffer); - count = 0; - - if (last->next == NULL) - { - last = buffer_extend(last); - if (last == NULL) - return MEMORY; - } - - else - last = last->next; - } - } - - else /* fread failed - probably end of file */ - { - if (feof(fp)) - { - buffer->last = last; - buffer->end_count = count; - return 0; /* no error */ - } - - /* Some kind of funky error; errno should be non-zero */ - return errno == 0 ? ERANGE : errno; - } - } -} - -/* This structure is used to control the test of a single file. */ -typedef enum -{ - VERBOSE, /* switches on all messages */ - INFORMATION, - WARNINGS, /* switches on warnings */ - LIBPNG_WARNING, - APP_WARNING, - ERRORS, /* just errors */ - APP_FAIL, /* continuable error - no need to longjmp */ - LIBPNG_ERROR, /* this and higher cause a longjmp */ - LIBPNG_BUG, /* erroneous behavior in libpng */ - APP_ERROR, /* such as out-of-memory in a callback */ - QUIET, /* no normal messages */ - USER_ERROR, /* such as file-not-found */ - INTERNAL_ERROR -} error_level; -#define LEVEL_MASK 0xf /* where the level is in 'options' */ - -#define EXHAUSTIVE 0x010 /* Test all combinations of active options */ -#define STRICT 0x020 /* Fail on warnings as well as errors */ -#define LOG 0x040 /* Log pass/fail to stdout */ -#define CONTINUE 0x080 /* Continue on APP_FAIL errors */ -#define SKIP_BUGS 0x100 /* Skip over known bugs */ -#define LOG_SKIPPED 0x200 /* Log skipped bugs */ -#define FIND_BAD_COMBOS 0x400 /* Attempt to deduce bad combos */ -#define LIST_COMBOS 0x800 /* List combos by name */ - -/* Result masks apply to the result bits in the 'results' field below; these - * bits are simple 1U<options = WARNINGS; /* default to !verbose, !quiet */ - dp->filename = NULL; - dp->operation = NULL; - dp->original_pp = NULL; - dp->original_ip = NULL; - dp->original_rows = NULL; - dp->read_pp = NULL; - dp->read_ip = NULL; - buffer_init(&dp->original_file); - -# ifdef PNG_WRITE_PNG_SUPPORTED - dp->write_pp = NULL; - buffer_init(&dp->written_file); -# endif -} - -static void -display_clean_read(struct display *dp) -{ - if (dp->read_pp != NULL) - png_destroy_read_struct(&dp->read_pp, &dp->read_ip, NULL); -} - -#ifdef PNG_WRITE_PNG_SUPPORTED -static void -display_clean_write(struct display *dp) -{ - if (dp->write_pp != NULL) - png_destroy_write_struct(&dp->write_pp, NULL); -} -#endif - -static void -display_clean(struct display *dp) -{ -# ifdef PNG_WRITE_PNG_SUPPORTED - display_clean_write(dp); -# endif - display_clean_read(dp); - - dp->original_rowbytes = 0; - dp->original_rows = NULL; - dp->chunks = 0; - - png_destroy_read_struct(&dp->original_pp, &dp->original_ip, NULL); - /* leave the filename for error detection */ - dp->results = 0; /* reset for next time */ -} - -static void -display_destroy(struct display *dp) -{ - /* Release any memory held in the display. */ -# ifdef PNG_WRITE_PNG_SUPPORTED - buffer_destroy(&dp->written_file); -# endif - - buffer_destroy(&dp->original_file); -} - -static struct display * -get_dp(png_structp pp) - /* The display pointer is always stored in the png_struct error pointer */ -{ - struct display *dp = (struct display*)png_get_error_ptr(pp); - - if (dp == NULL) - { - fprintf(stderr, "pngimage: internal error (no display)\n"); - exit(99); /* prevents a crash */ - } - - return dp; -} - -/* error handling */ -#ifdef __GNUC__ -# define VGATTR __attribute__((__format__ (__printf__,3,4))) - /* Required to quiet GNUC warnings when the compiler sees a stdarg function - * that calls one of the stdio v APIs. - */ -#else -# define VGATTR -#endif -static void VGATTR -display_log(struct display *dp, error_level level, const char *fmt, ...) - /* 'level' is as above, fmt is a stdio style format string. This routine - * does not return if level is above LIBPNG_WARNING - */ -{ - dp->results |= 1U << level; - - if (level > (error_level)(dp->options & LEVEL_MASK)) - { - const char *lp; - va_list ap; - - switch (level) - { - case INFORMATION: lp = "information"; break; - case LIBPNG_WARNING: lp = "warning(libpng)"; break; - case APP_WARNING: lp = "warning(pngimage)"; break; - case APP_FAIL: lp = "error(continuable)"; break; - case LIBPNG_ERROR: lp = "error(libpng)"; break; - case LIBPNG_BUG: lp = "bug(libpng)"; break; - case APP_ERROR: lp = "error(pngimage)"; break; - case USER_ERROR: lp = "error(user)"; break; - - case INTERNAL_ERROR: /* anything unexpected is an internal error: */ - case VERBOSE: case WARNINGS: case ERRORS: case QUIET: - default: lp = "bug(pngimage)"; break; - } - - fprintf(stderr, "%s: %s: %s", - dp->filename != NULL ? dp->filename : "", lp, dp->operation); - - if (dp->transforms != 0) - { - int tr = dp->transforms; - - if (is_combo(tr)) - { - if (dp->options & LIST_COMBOS) - { - int trx = tr; - - fprintf(stderr, "("); - if (trx) - { - int start = 0; - - while (trx) - { - int trz = trx & -trx; - - if (start) fprintf(stderr, "+"); - fprintf(stderr, "%s", transform_name(trz)); - start = 1; - trx &= ~trz; - } - } - - else - fprintf(stderr, "-"); - fprintf(stderr, ")"); - } - - else - fprintf(stderr, "(0x%x)", tr); - } - - else - fprintf(stderr, "(%s)", transform_name(tr)); - } - - fprintf(stderr, ": "); - - va_start(ap, fmt); - vfprintf(stderr, fmt, ap); - va_end(ap); - - fputc('\n', stderr); - } - /* else do not output any message */ - - /* Errors cause this routine to exit to the fail code */ - if (level > APP_FAIL || (level > ERRORS && !(dp->options & CONTINUE))) - longjmp(dp->error_return, level); -} - -/* error handler callbacks for libpng */ -static void PNGCBAPI -display_warning(png_structp pp, png_const_charp warning) -{ - display_log(get_dp(pp), LIBPNG_WARNING, "%s", warning); -} - -static void PNGCBAPI -display_error(png_structp pp, png_const_charp error) -{ - struct display *dp = get_dp(pp); - - display_log(dp, LIBPNG_ERROR, "%s", error); -} - -static void -display_cache_file(struct display *dp, const char *filename) - /* Does the initial cache of the file. */ -{ - FILE *fp; - int ret; - - dp->filename = filename; - - if (filename != NULL) - { - fp = fopen(filename, "rb"); - if (fp == NULL) - display_log(dp, USER_ERROR, "open failed: %s", strerror(errno)); - } - - else - fp = stdin; - - ret = buffer_from_file(&dp->original_file, fp); - - fclose(fp); - - if (ret != 0) - display_log(dp, APP_ERROR, "read failed: %s", strerror(ret)); -} - -static void -buffer_read(struct display *dp, struct buffer *bp, png_bytep data, - size_t size) -{ - struct buffer_list *last = bp->current; - size_t read_count = bp->read_count; - - while (size > 0) - { - size_t avail; - - if (last == NULL || - (last == bp->last && read_count >= bp->end_count)) - { - display_log(dp, USER_ERROR, "file truncated (%lu bytes)", - (unsigned long)size); - /*NOTREACHED*/ - break; - } - - else if (read_count >= sizeof last->buffer) - { - /* Move to the next buffer: */ - last = last->next; - read_count = 0; - bp->current = last; /* Avoid update outside the loop */ - - /* And do a sanity check (the EOF case is caught above) */ - if (last == NULL) - { - display_log(dp, INTERNAL_ERROR, "damaged buffer list"); - /*NOTREACHED*/ - break; - } - } - - avail = (sizeof last->buffer) - read_count; - if (avail > size) - avail = size; - - memcpy(data, last->buffer + read_count, avail); - read_count += avail; - size -= avail; - data += avail; - } - - bp->read_count = read_count; -} - -static void PNGCBAPI -read_function(png_structp pp, png_bytep data, size_t size) -{ - buffer_read(get_dp(pp), get_buffer(pp), data, size); -} - -static void -read_png(struct display *dp, struct buffer *bp, const char *operation, - int transforms) -{ - png_structp pp; - png_infop ip; - - /* This cleans out any previous read and sets operation and transforms to - * empty. - */ - display_clean_read(dp); - - if (operation != NULL) /* else this is a verify and do not overwrite info */ - { - dp->operation = operation; - dp->transforms = transforms; - } - - dp->read_pp = pp = png_create_read_struct(PNG_LIBPNG_VER_STRING, dp, - display_error, display_warning); - if (pp == NULL) - display_log(dp, LIBPNG_ERROR, "failed to create read struct"); - - /* The png_read_png API requires us to make the info struct, but it does the - * call to png_read_info. - */ - dp->read_ip = ip = png_create_info_struct(pp); - if (ip == NULL) - display_log(dp, LIBPNG_ERROR, "failed to create info struct"); - -# ifdef PNG_SET_USER_LIMITS_SUPPORTED - /* Remove the user limits, if any */ - png_set_user_limits(pp, 0x7fffffff, 0x7fffffff); -# endif - - /* Set the IO handling */ - buffer_start_read(bp); - png_set_read_fn(pp, bp, read_function); - - png_read_png(pp, ip, transforms, NULL/*params*/); - -#if 0 /* crazy debugging */ - { - png_bytep pr = png_get_rows(pp, ip)[0]; - size_t rb = png_get_rowbytes(pp, ip); - size_t cb; - char c = ' '; - - fprintf(stderr, "%.4x %2d (%3lu bytes):", transforms, png_get_bit_depth(pp,ip), (unsigned long)rb); - - for (cb=0; cboriginal_file, "original read", 0/*no transform*/); - - /* Move the result to the 'original' fields */ - dp->original_pp = pp = dp->read_pp, dp->read_pp = NULL; - dp->original_ip = ip = dp->read_ip, dp->read_ip = NULL; - - dp->original_rowbytes = png_get_rowbytes(pp, ip); - if (dp->original_rowbytes == 0) - display_log(dp, LIBPNG_BUG, "png_get_rowbytes returned 0"); - - dp->chunks = png_get_valid(pp, ip, 0xffffffff); - if ((dp->chunks & PNG_INFO_IDAT) == 0) /* set by png_read_png */ - display_log(dp, LIBPNG_BUG, "png_read_png did not set IDAT flag"); - - dp->original_rows = png_get_rows(pp, ip); - if (dp->original_rows == NULL) - display_log(dp, LIBPNG_BUG, "png_read_png did not create row buffers"); - - if (!png_get_IHDR(pp, ip, - &dp->width, &dp->height, &dp->bit_depth, &dp->color_type, - &dp->interlace_method, &dp->compression_method, &dp->filter_method)) - display_log(dp, LIBPNG_BUG, "png_get_IHDR failed"); - - /* 'active' transforms are discovered based on the original image format; - * running one active transform can activate others. At present the code - * does not attempt to determine the closure. - */ - { - png_uint_32 chunks = dp->chunks; - int active = 0, inactive = 0; - int ct = dp->color_type; - int bd = dp->bit_depth; - unsigned int i; - - for (i=0; iactive_transforms = active; - dp->ignored_transforms = inactive; /* excluding write-only transforms */ - } -} - -static int -compare_read(struct display *dp, int applied_transforms) -{ - /* Compare the png_info from read_ip with original_info */ - size_t rowbytes; - png_uint_32 width, height; - int bit_depth, color_type; - int interlace_method, compression_method, filter_method; - const char *e = NULL; - - png_get_IHDR(dp->read_pp, dp->read_ip, &width, &height, &bit_depth, - &color_type, &interlace_method, &compression_method, &filter_method); - -# define C(item) if (item != dp->item) \ - display_log(dp, APP_WARNING, "IHDR " #item "(%lu) changed to %lu",\ - (unsigned long)dp->item, (unsigned long)item), e = #item - - /* The IHDR should be identical: */ - C(width); - C(height); - C(bit_depth); - C(color_type); - C(interlace_method); - C(compression_method); - C(filter_method); - - /* 'e' remains set to the name of the last thing changed: */ - if (e) - display_log(dp, APP_ERROR, "IHDR changed (%s)", e); - - /* All the chunks from the original PNG should be preserved in the output PNG - * because the PNG format has not been changed. - */ - { - unsigned long chunks = - png_get_valid(dp->read_pp, dp->read_ip, 0xffffffff); - - if (chunks != dp->chunks) - display_log(dp, APP_FAIL, "PNG chunks changed from 0x%lx to 0x%lx", - (unsigned long)dp->chunks, chunks); - } - - /* rowbytes should be the same */ - rowbytes = png_get_rowbytes(dp->read_pp, dp->read_ip); - - /* NOTE: on 64-bit systems this may trash the top bits of rowbytes, - * which could lead to weird error messages. - */ - if (rowbytes != dp->original_rowbytes) - display_log(dp, APP_ERROR, "PNG rowbytes changed from %lu to %lu", - (unsigned long)dp->original_rowbytes, (unsigned long)rowbytes); - - /* The rows should be the same too, unless the applied transforms includes - * the shift transform, in which case low bits may have been lost. - */ - { - png_bytepp rows = png_get_rows(dp->read_pp, dp->read_ip); - unsigned int mask; /* mask (if not zero) for the final byte */ - - if (bit_depth < 8) - { - /* Need the stray bits at the end, this depends only on the low bits - * of the image width; overflow does not matter. If the width is an - * exact multiple of 8 bits this gives a mask of 0, not 0xff. - */ - mask = 0xff & (0xff00 >> ((bit_depth * width) & 7)); - } - - else - mask = 0; - - if (rows == NULL) - display_log(dp, LIBPNG_BUG, "png_get_rows returned NULL"); - - if ((applied_transforms & PNG_TRANSFORM_SHIFT) == 0 || - (dp->active_transforms & PNG_TRANSFORM_SHIFT) == 0 || - color_type == PNG_COLOR_TYPE_PALETTE) - { - unsigned long y; - - for (y=0; yoriginal_rows[y]; - - if (memcmp(row, orig, rowbytes-(mask != 0)) != 0 || (mask != 0 && - ((row[rowbytes-1] & mask) != (orig[rowbytes-1] & mask)))) - { - size_t x; - - /* Find the first error */ - for (x=0; x 0x%.2x", - (unsigned long)x, (unsigned long)y, orig[x], row[x]); - return 0; /* don't keep reporting failed rows on 'continue' */ - } - } - } - - else -# ifdef PNG_sBIT_SUPPORTED - { - unsigned long y; - int bpp; /* bits-per-pixel then bytes-per-pixel */ - /* components are up to 8 bytes in size */ - png_byte sig_bits[8]; - png_color_8p sBIT; - - if (png_get_sBIT(dp->read_pp, dp->read_ip, &sBIT) != PNG_INFO_sBIT) - display_log(dp, INTERNAL_ERROR, - "active shift transform but no sBIT in file"); - - switch (color_type) - { - case PNG_COLOR_TYPE_GRAY: - sig_bits[0] = sBIT->gray; - bpp = bit_depth; - break; - - case PNG_COLOR_TYPE_GA: - sig_bits[0] = sBIT->gray; - sig_bits[1] = sBIT->alpha; - bpp = 2 * bit_depth; - break; - - case PNG_COLOR_TYPE_RGB: - sig_bits[0] = sBIT->red; - sig_bits[1] = sBIT->green; - sig_bits[2] = sBIT->blue; - bpp = 3 * bit_depth; - break; - - case PNG_COLOR_TYPE_RGBA: - sig_bits[0] = sBIT->red; - sig_bits[1] = sBIT->green; - sig_bits[2] = sBIT->blue; - sig_bits[3] = sBIT->alpha; - bpp = 4 * bit_depth; - break; - - default: - display_log(dp, LIBPNG_ERROR, "invalid colour type %d", - color_type); - /*NOTREACHED*/ - bpp = 0; - break; - } - - { - int b; - - for (b=0; 8*b bit_depth/*!palette*/) - display_log(dp, LIBPNG_BUG, - "invalid sBIT[%u] value %d returned for PNG bit depth %d", - b, sig_bits[b], bit_depth); - } - } - - if (bpp < 8 && bpp != bit_depth) - { - /* sanity check; this is a grayscale PNG; something is wrong in the - * code above. - */ - display_log(dp, INTERNAL_ERROR, "invalid bpp %u for bit_depth %u", - bpp, bit_depth); - } - - switch (bit_depth) - { - int b; - - case 16: /* Two bytes per component, big-endian */ - for (b = (bpp >> 4); b > 0; --b) - { - unsigned int sig = (unsigned int)(0xffff0000 >> sig_bits[b]); - - sig_bits[2*b+1] = (png_byte)sig; - sig_bits[2*b+0] = (png_byte)(sig >> 8); /* big-endian */ - } - break; - - case 8: /* One byte per component */ - for (b=0; b*8 < bpp; ++b) - sig_bits[b] = (png_byte)(0xff00 >> sig_bits[b]); - break; - - case 1: /* allowed, but dumb */ - /* Value is 1 */ - sig_bits[0] = 0xff; - break; - - case 2: /* Replicate 4 times */ - /* Value is 1 or 2 */ - b = 0x3 & ((0x3<<2) >> sig_bits[0]); - b |= b << 2; - b |= b << 4; - sig_bits[0] = (png_byte)b; - break; - - case 4: /* Relicate twice */ - /* Value is 1, 2, 3 or 4 */ - b = 0xf & ((0xf << 4) >> sig_bits[0]); - b |= b << 4; - sig_bits[0] = (png_byte)b; - break; - - default: - display_log(dp, LIBPNG_BUG, "invalid bit depth %d", bit_depth); - break; - } - - /* Convert bpp to bytes; this gives '1' for low-bit depth grayscale, - * where there are multiple pixels per byte. - */ - bpp = (bpp+7) >> 3; - - /* The mask can be combined with sig_bits[0] */ - if (mask != 0) - { - mask &= sig_bits[0]; - - if (bpp != 1 || mask == 0) - display_log(dp, INTERNAL_ERROR, "mask calculation error %u, %u", - bpp, mask); - } - - for (y=0; yoriginal_rows[y]; - unsigned long x; - - for (x=0; x<(width-(mask!=0)); ++x) - { - int b; - - for (b=0; b%.2x", - x, b, y, orig[-1], row[-1]); - return 0; - } - } - } - - if (mask != 0 && (*row & mask) != (*orig & mask)) - { - display_log(dp, APP_FAIL, - "significant bits at (%lu[end],%lu) changed", x, y); - return 0; - } - } /* for y */ - } -# else /* !sBIT */ - display_log(dp, INTERNAL_ERROR, - "active shift transform but no sBIT support"); -# endif /* !sBIT */ - } - - return 1; /* compare succeeded */ -} - -#ifdef PNG_WRITE_PNG_SUPPORTED -static void -buffer_write(struct display *dp, struct buffer *buffer, png_bytep data, - size_t size) - /* Generic write function used both from the write callback provided to - * libpng and from the generic read code. - */ -{ - /* Write the data into the buffer, adding buffers as required */ - struct buffer_list *last = buffer->last; - size_t end_count = buffer->end_count; - - while (size > 0) - { - size_t avail; - - if (end_count >= sizeof last->buffer) - { - if (last->next == NULL) - { - last = buffer_extend(last); - - if (last == NULL) - display_log(dp, APP_ERROR, "out of memory saving file"); - } - - else - last = last->next; - - buffer->last = last; /* avoid the need to rewrite every time */ - end_count = 0; - } - - avail = (sizeof last->buffer) - end_count; - if (avail > size) - avail = size; - - memcpy(last->buffer + end_count, data, avail); - end_count += avail; - size -= avail; - data += avail; - } - - buffer->end_count = end_count; -} - -static void PNGCBAPI -write_function(png_structp pp, png_bytep data, size_t size) -{ - buffer_write(get_dp(pp), get_buffer(pp), data, size); -} - -static void -write_png(struct display *dp, png_infop ip, int transforms) -{ - display_clean_write(dp); /* safety */ - - buffer_start_write(&dp->written_file); - dp->operation = "write"; - dp->transforms = transforms; - - dp->write_pp = png_create_write_struct(PNG_LIBPNG_VER_STRING, dp, - display_error, display_warning); - - if (dp->write_pp == NULL) - display_log(dp, APP_ERROR, "failed to create write png_struct"); - - png_set_write_fn(dp->write_pp, &dp->written_file, write_function, - NULL/*flush*/); - -# ifdef PNG_SET_USER_LIMITS_SUPPORTED - /* Remove the user limits, if any */ - png_set_user_limits(dp->write_pp, 0x7fffffff, 0x7fffffff); -# endif - - /* Certain transforms require the png_info to be zapped to allow the - * transform to work correctly. - */ - if (transforms & (PNG_TRANSFORM_PACKING| - PNG_TRANSFORM_STRIP_FILLER| - PNG_TRANSFORM_STRIP_FILLER_BEFORE)) - { - int ct = dp->color_type; - - if (transforms & (PNG_TRANSFORM_STRIP_FILLER| - PNG_TRANSFORM_STRIP_FILLER_BEFORE)) - ct &= ~PNG_COLOR_MASK_ALPHA; - - png_set_IHDR(dp->write_pp, ip, dp->width, dp->height, dp->bit_depth, ct, - dp->interlace_method, dp->compression_method, dp->filter_method); - } - - png_write_png(dp->write_pp, ip, transforms, NULL/*params*/); - - /* Clean it on the way out - if control returns to the caller then the - * written_file contains the required data. - */ - display_clean_write(dp); -} -#endif /* WRITE_PNG */ - -static int -skip_transform(struct display *dp, int tr) - /* Helper to test for a bad combo and log it if it is skipped */ -{ - if ((dp->options & SKIP_BUGS) != 0 && is_bad_combo(tr)) - { - /* Log this to stdout if logging is on, otherwise just do an information - * display_log. - */ - if ((dp->options & LOG_SKIPPED) != 0) - { - printf("SKIP: %s transforms ", dp->filename); - - while (tr != 0) - { - int next = first_transform(tr); - tr &= ~next; - - printf("%s", transform_name(next)); - if (tr != 0) - putchar('+'); - } - - putchar('\n'); - } - - else - display_log(dp, INFORMATION, "%s: skipped known bad combo 0x%x", - dp->filename, tr); - - return 1; /* skip */ - } - - return 0; /* don't skip */ -} - -static void -test_one_file(struct display *dp, const char *filename) -{ - /* First cache the file and update the display original file - * information for the new file. - */ - dp->operation = "cache file"; - dp->transforms = 0; - display_cache_file(dp, filename); - update_display(dp); - - /* First test: if there are options that should be ignored for this file - * verify that they really are ignored. - */ - if (dp->ignored_transforms != 0) - { - read_png(dp, &dp->original_file, "ignored transforms", - dp->ignored_transforms); - - /* The result should be identical to the original_rows */ - if (!compare_read(dp, 0/*transforms applied*/)) - return; /* no point testing more */ - } - -#ifdef PNG_WRITE_PNG_SUPPORTED - /* Second test: write the original PNG data out to a new file (to test the - * write side) then read the result back in and make sure that it hasn't - * changed. - */ - dp->operation = "write"; - write_png(dp, dp->original_ip, 0/*transforms*/); - read_png(dp, &dp->written_file, NULL, 0/*transforms*/); - if (!compare_read(dp, 0/*transforms applied*/)) - return; -#endif - - /* Third test: the active options. Test each in turn, or, with the - * EXHAUSTIVE option, test all possible combinations. - */ - { - /* Use unsigned int here because the code below to increment through all - * the possibilities exhaustively has to use a compare and that must be - * unsigned, because some transforms are negative on a 16-bit system. - */ - unsigned int active = dp->active_transforms; - int exhaustive = (dp->options & EXHAUSTIVE) != 0; - unsigned int current = first_transform(active); - unsigned int bad_transforms = 0; - unsigned int bad_combo = ~0U; /* bitwise AND of failing transforms */ - unsigned int bad_combo_list = 0; /* bitwise OR of failures */ - - for (;;) - { - read_png(dp, &dp->original_file, "active transforms", current); - - /* If this involved any irreversible transformations then if we write - * it out with just the reversible transformations and read it in again - * with the same transforms we should get the same thing. At present - * this isn't done - it just seems like a waste of time and it would - * require two sets of read png_struct/png_info. - * - * If there were no irreversible transformations then if we write it - * out and read it back in again (without the reversible transforms) - * we should get back to the place where we started. - */ -#ifdef PNG_WRITE_PNG_SUPPORTED - if ((current & write_transforms) == current) - { - /* All transforms reversible: write the PNG with the transformations - * reversed, then read it back in with no transformations. The - * result should be the same as the original apart from the loss of - * low order bits because of the SHIFT/sBIT transform. - */ - dp->operation = "reversible transforms"; - write_png(dp, dp->read_ip, current); - - /* And if this is read back in, because all the transformations were - * reversible, the result should be the same. - */ - read_png(dp, &dp->written_file, NULL, 0); - if (!compare_read(dp, current/*for the SHIFT/sBIT transform*/)) - { - /* This set of transforms failed. If a single bit is set - if - * there is just one transform - don't include this in further - * 'exhaustive' tests. Notice that each transform is tested on - * its own before testing combos in the exhaustive case. - */ - if (is_combo(current)) - { - bad_combo &= current; - bad_combo_list |= current; - } - - else - bad_transforms |= current; - } - } -#endif - - /* Now move to the next transform */ - if (exhaustive) /* all combinations */ - { - unsigned int next = current; - - do - { - if (next == read_transforms) /* Everything tested */ - goto combo; - - ++next; - } /* skip known bad combos if the relevant option is set; skip - * combos involving known bad single transforms in all cases. - */ - while ( (next & read_transforms) <= current - || (next & active) == 0 /* skip cases that do nothing */ - || (next & bad_transforms) != 0 - || skip_transform(dp, next)); - - assert((next & read_transforms) == next); - current = next; - } - - else /* one at a time */ - { - active &= ~current; - - if (active == 0) - goto combo; - - current = first_transform(active); - } - } - -combo: - if (dp->options & FIND_BAD_COMBOS) - { - /* bad_combos identifies the combos that occur in all failing cases; - * bad_combo_list identifies transforms that do not prevent the - * failure. - */ - if (bad_combo != ~0U) - printf("%s[0x%x]: PROBLEM: 0x%x[0x%x] ANTIDOTE: 0x%x\n", - dp->filename, active, bad_combo, bad_combo_list, - rw_transforms & ~bad_combo_list); - - else - printf("%s: no %sbad combos found\n", dp->filename, - (dp->options & SKIP_BUGS) ? "additional " : ""); - } - } -} - -static int -do_test(struct display *dp, const char *file) - /* Exists solely to isolate the setjmp clobbers */ -{ - int ret = setjmp(dp->error_return); - - if (ret == 0) - { - test_one_file(dp, file); - return 0; - } - - else if (ret < ERRORS) /* shouldn't longjmp on warnings */ - display_log(dp, INTERNAL_ERROR, "unexpected return code %d", ret); - - return ret; -} - -int -main(int argc, char **argv) -{ - /* For each file on the command line test it with a range of transforms */ - int option_end, ilog = 0; - struct display d; - - validate_T(); - display_init(&d); - - for (option_end=1; option_end QUIET) /* abort on user or internal error */ - return 99; - } - - /* Here on any return, including failures, except user/internal issues - */ - { - int pass = (d.options & STRICT) ? - RESULT_STRICT(d.results) : RESULT_RELAXED(d.results); - - if (!pass) - ++errors; - - if (d.options & LOG) - { - int j; - - printf("%s: pngimage ", pass ? "PASS" : "FAIL"); - - for (j=1; j -#include -#include -#include -#include -#include -#include - -#if defined(HAVE_CONFIG_H) && !defined(PNG_NO_CONFIG_H) -# include -#endif - -/* Define the following to use this test against your installed libpng, rather - * than the one being built here: - */ -#ifdef PNG_FREESTANDING_TESTS -# include -#else -# include "../../png.h" -#endif - -/* 1.6.1 added support for the configure test harness, which uses 77 to indicate - * a skipped test, in earlier versions we need to succeed on a skipped test, so: - */ -#if PNG_LIBPNG_VER >= 10601 && defined(HAVE_CONFIG_H) -# define SKIP 77 -#else -# define SKIP 0 -#endif - -#ifdef PNG_SIMPLIFIED_READ_SUPPORTED /* Else nothing can be done */ -#include "../tools/sRGB.h" - -/* KNOWN ISSUES - * - * These defines switch on alternate algorithms for format conversions to match - * the current libpng implementation; they are set to allow pngstest to pass - * even though libpng is producing answers that are not as correct as they - * should be. - */ -#define ALLOW_UNUSED_GPC 0 - /* If true include unused static GPC functions and declare an external array - * of them to hide the fact that they are unused. This is for development - * use while testing the correct function to use to take into account libpng - * misbehavior, such as using a simple power law to correct sRGB to linear. - */ - -/* The following is to support direct compilation of this file as C++ */ -#ifdef __cplusplus -# define voidcast(type, value) static_cast(value) -# define aligncastconst(type, value) \ - static_cast(static_cast(value)) -#else -# define voidcast(type, value) (value) -# define aligncastconst(type, value) ((const void*)(value)) -#endif /* __cplusplus */ - -/* During parallel runs of pngstest each temporary file needs a unique name, - * this is used to permit uniqueness using a command line argument which can be - * up to 22 characters long. - */ -static char tmpf[23] = "TMP"; - -/* Generate random bytes. This uses a boring repeatable algorithm and it - * is implemented here so that it gives the same set of numbers on every - * architecture. It's a linear congruential generator (Knuth or Sedgewick - * "Algorithms") but it comes from the 'feedback taps' table in Horowitz and - * Hill, "The Art of Electronics". - */ -static void -make_random_bytes(png_uint_32* seed, void* pv, size_t size) -{ - png_uint_32 u0 = seed[0], u1 = seed[1]; - png_bytep bytes = voidcast(png_bytep, pv); - - /* There are thirty three bits, the next bit in the sequence is bit-33 XOR - * bit-20. The top 1 bit is in u1, the bottom 32 are in u0. - */ - size_t i; - for (i=0; i> (20-8)) ^ ((u1 << 7) | (u0 >> (32-7)))) & 0xff; - u1 <<= 8; - u1 |= u0 >> 24; - u0 <<= 8; - u0 |= u; - *bytes++ = (png_byte)u; - } - - seed[0] = u0; - seed[1] = u1; -} - -static png_uint_32 color_seed[2]; - -static void -reseed(void) -{ - color_seed[0] = 0x12345678U; - color_seed[1] = 0x9abcdefU; -} - -static void -random_color(png_colorp color) -{ - make_random_bytes(color_seed, color, sizeof *color); -} - -/* Math support - neither Cygwin nor Visual Studio have C99 support and we need - * a predictable rounding function, so make one here: - */ -static double -closestinteger(double x) -{ - return floor(x + .5); -} - -/* Cast support: remove GCC whines. */ -static png_byte -u8d(double d) -{ - d = closestinteger(d); - return (png_byte)d; -} - -static png_uint_16 -u16d(double d) -{ - d = closestinteger(d); - return (png_uint_16)d; -} - -/* sRGB support: use exact calculations rounded to the nearest int, see the - * fesetround() call in main(). sRGB_to_d optimizes the 8 to 16-bit conversion. - */ -static double sRGB_to_d[256]; -static double g22_to_d[256]; - -static void -init_sRGB_to_d(void) -{ - int i; - - sRGB_to_d[0] = 0; - for (i=1; i<255; ++i) - sRGB_to_d[i] = linear_from_sRGB(i/255.); - sRGB_to_d[255] = 1; - - g22_to_d[0] = 0; - for (i=1; i<255; ++i) - g22_to_d[i] = pow(i/255., 1/.45455); - g22_to_d[255] = 1; -} - -static png_byte -sRGB(double linear /*range 0.0 .. 1.0*/) -{ - return u8d(255 * sRGB_from_linear(linear)); -} - -static png_byte -isRGB(int fixed_linear) -{ - return sRGB(fixed_linear / 65535.); -} - -#if 0 /* not used */ -static png_byte -unpremultiply(int component, int alpha) -{ - if (alpha <= component) - return 255; /* Arbitrary, but consistent with the libpng code */ - - else if (alpha >= 65535) - return isRGB(component); - - else - return sRGB((double)component / alpha); -} -#endif - -static png_uint_16 -ilinear(int fixed_srgb) -{ - return u16d(65535 * sRGB_to_d[fixed_srgb]); -} - -static png_uint_16 -ilineara(int fixed_srgb, int alpha) -{ - return u16d((257 * alpha) * sRGB_to_d[fixed_srgb]); -} - -static png_uint_16 -ilinear_g22(int fixed_srgb) -{ - return u16d(65535 * g22_to_d[fixed_srgb]); -} - -#if ALLOW_UNUSED_GPC -static png_uint_16 -ilineara_g22(int fixed_srgb, int alpha) -{ - return u16d((257 * alpha) * g22_to_d[fixed_srgb]); -} -#endif - -static double -YfromRGBint(int ir, int ig, int ib) -{ - double r = ir; - double g = ig; - double b = ib; - return YfromRGB(r, g, b); -} - -#if 0 /* unused */ -/* The error that results from using a 2.2 power law in place of the correct - * sRGB transform, given an 8-bit value which might be either sRGB or power-law. - */ -static int -power_law_error8(int value) -{ - if (value > 0 && value < 255) - { - double vd = value / 255.; - double e = fabs( - pow(sRGB_to_d[value], 1/2.2) - sRGB_from_linear(pow(vd, 2.2))); - - /* Always allow an extra 1 here for rounding errors */ - e = 1+floor(255 * e); - return (int)e; - } - - return 0; -} - -static int error_in_sRGB_roundtrip = 56; /* by experiment */ -static int -power_law_error16(int value) -{ - if (value > 0 && value < 65535) - { - /* Round trip the value through an 8-bit representation but using - * non-matching to/from conversions. - */ - double vd = value / 65535.; - double e = fabs( - pow(sRGB_from_linear(vd), 2.2) - linear_from_sRGB(pow(vd, 1/2.2))); - - /* Always allow an extra 1 here for rounding errors */ - e = error_in_sRGB_roundtrip+floor(65535 * e); - return (int)e; - } - - return 0; -} - -static int -compare_8bit(int v1, int v2, int error_limit, int multiple_algorithms) -{ - int e = abs(v1-v2); - int ev1, ev2; - - if (e <= error_limit) - return 1; - - if (!multiple_algorithms) - return 0; - - ev1 = power_law_error8(v1); - if (e <= ev1) - return 1; - - ev2 = power_law_error8(v2); - if (e <= ev2) - return 1; - - return 0; -} - -static int -compare_16bit(int v1, int v2, int error_limit, int multiple_algorithms) -{ - int e = abs(v1-v2); - int ev1, ev2; - - if (e <= error_limit) - return 1; - - /* "multiple_algorithms" in this case means that a color-map has been - * involved somewhere, so we can deduce that the values were forced to 8-bit - * (like the via_linear case for 8-bit.) - */ - if (!multiple_algorithms) - return 0; - - ev1 = power_law_error16(v1); - if (e <= ev1) - return 1; - - ev2 = power_law_error16(v2); - if (e <= ev2) - return 1; - - return 0; -} -#endif /* unused */ - -#define USE_FILE 1 /* else memory */ -#define USE_STDIO 2 /* else use file name */ -#define STRICT 4 /* fail on warnings too */ -#define VERBOSE 8 -#define KEEP_TMPFILES 16 /* else delete temporary files */ -#define KEEP_GOING 32 -#define ACCUMULATE 64 -#define FAST_WRITE 128 -#define sRGB_16BIT 256 -#define NO_RESEED 512 /* do not reseed on each new file */ -#define GBG_ERROR 1024 /* do not ignore the gamma+background_rgb_to_gray - * libpng warning. */ - -static void -print_opts(png_uint_32 opts) -{ - if (opts & USE_FILE) - printf(" --file"); - if (opts & USE_STDIO) - printf(" --stdio"); - if (!(opts & STRICT)) - printf(" --nostrict"); - if (opts & VERBOSE) - printf(" --verbose"); - if (opts & KEEP_TMPFILES) - printf(" --preserve"); - if (opts & KEEP_GOING) - printf(" --keep-going"); - if (opts & ACCUMULATE) - printf(" --accumulate"); - if (!(opts & FAST_WRITE)) /* --fast is currently the default */ - printf(" --slow"); - if (opts & sRGB_16BIT) - printf(" --sRGB-16bit"); - if (opts & NO_RESEED) - printf(" --noreseed"); -#if PNG_LIBPNG_VER < 10700 /* else on by default */ - if (opts & GBG_ERROR) - printf(" --fault-gbg-warning"); -#endif -} - -#define FORMAT_NO_CHANGE 0x80000000 /* additional flag */ - -/* A name table for all the formats - defines the format of the '+' arguments to - * pngstest. - */ -#define FORMAT_COUNT 64 -#define FORMAT_MASK 0x3f -static const char * const format_names[FORMAT_COUNT] = -{ - "sRGB-gray", - "sRGB-gray+alpha", - "sRGB-rgb", - "sRGB-rgb+alpha", - "linear-gray", - "linear-gray+alpha", - "linear-rgb", - "linear-rgb+alpha", - - "color-mapped-sRGB-gray", - "color-mapped-sRGB-gray+alpha", - "color-mapped-sRGB-rgb", - "color-mapped-sRGB-rgb+alpha", - "color-mapped-linear-gray", - "color-mapped-linear-gray+alpha", - "color-mapped-linear-rgb", - "color-mapped-linear-rgb+alpha", - - "sRGB-gray", - "sRGB-gray+alpha", - "sRGB-bgr", - "sRGB-bgr+alpha", - "linear-gray", - "linear-gray+alpha", - "linear-bgr", - "linear-bgr+alpha", - - "color-mapped-sRGB-gray", - "color-mapped-sRGB-gray+alpha", - "color-mapped-sRGB-bgr", - "color-mapped-sRGB-bgr+alpha", - "color-mapped-linear-gray", - "color-mapped-linear-gray+alpha", - "color-mapped-linear-bgr", - "color-mapped-linear-bgr+alpha", - - "sRGB-gray", - "alpha+sRGB-gray", - "sRGB-rgb", - "alpha+sRGB-rgb", - "linear-gray", - "alpha+linear-gray", - "linear-rgb", - "alpha+linear-rgb", - - "color-mapped-sRGB-gray", - "color-mapped-alpha+sRGB-gray", - "color-mapped-sRGB-rgb", - "color-mapped-alpha+sRGB-rgb", - "color-mapped-linear-gray", - "color-mapped-alpha+linear-gray", - "color-mapped-linear-rgb", - "color-mapped-alpha+linear-rgb", - - "sRGB-gray", - "alpha+sRGB-gray", - "sRGB-bgr", - "alpha+sRGB-bgr", - "linear-gray", - "alpha+linear-gray", - "linear-bgr", - "alpha+linear-bgr", - - "color-mapped-sRGB-gray", - "color-mapped-alpha+sRGB-gray", - "color-mapped-sRGB-bgr", - "color-mapped-alpha+sRGB-bgr", - "color-mapped-linear-gray", - "color-mapped-alpha+linear-gray", - "color-mapped-linear-bgr", - "color-mapped-alpha+linear-bgr", -}; - -/* Decode an argument to a format number. */ -static png_uint_32 -formatof(const char *arg) -{ - char *ep; - unsigned long format = strtoul(arg, &ep, 0); - - if (ep > arg && *ep == 0 && format < FORMAT_COUNT) - return (png_uint_32)format; - - else for (format=0; format < FORMAT_COUNT; ++format) - { - if (strcmp(format_names[format], arg) == 0) - return (png_uint_32)format; - } - - fprintf(stderr, "pngstest: format name '%s' invalid\n", arg); - return FORMAT_COUNT; -} - -/* Bitset/test functions for formats */ -#define FORMAT_SET_COUNT (FORMAT_COUNT / 32) -typedef struct -{ - png_uint_32 bits[FORMAT_SET_COUNT]; -} -format_list; - -static void format_init(format_list *pf) -{ - int i; - for (i=0; ibits[i] = 0; /* All off */ -} - -#if 0 /* currently unused */ -static void format_clear(format_list *pf) -{ - int i; - for (i=0; ibits[i] = 0; -} -#endif - -static int format_is_initial(format_list *pf) -{ - int i; - for (i=0; ibits[i] != 0) - return 0; - - return 1; -} - -static int format_set(format_list *pf, png_uint_32 format) -{ - if (format < FORMAT_COUNT) - return pf->bits[format >> 5] |= ((png_uint_32)1) << (format & 31); - - return 0; -} - -#if 0 /* currently unused */ -static int format_unset(format_list *pf, png_uint_32 format) -{ - if (format < FORMAT_COUNT) - return pf->bits[format >> 5] &= ~((png_uint_32)1) << (format & 31); - - return 0; -} -#endif - -static int format_isset(format_list *pf, png_uint_32 format) -{ - return format < FORMAT_COUNT && - (pf->bits[format >> 5] & (((png_uint_32)1) << (format & 31))) != 0; -} - -static void format_default(format_list *pf, int redundant) -{ - if (redundant) - { - int i; - - /* set everything, including flags that are pointless */ - for (i=0; ibits[i] = ~(png_uint_32)0; - } - - else - { - png_uint_32 f; - - for (f=0; finput_file != NULL) - rewind(image->input_file); -} - -/* Free the image buffer; the buffer is re-used on a re-read, this is just for - * cleanup. - */ -static void -freebuffer(Image *image) -{ - if (image->buffer) free(image->buffer); - image->buffer = NULL; - image->bufsize = 0; - image->allocsize = 0; -} - -/* Delete function; cleans out all the allocated data and the temporary file in - * the image. - */ -static void -freeimage(Image *image) -{ - freebuffer(image); - png_image_free(&image->image); - - if (image->input_file != NULL) - { - fclose(image->input_file); - image->input_file = NULL; - } - - if (image->input_memory != NULL) - { - free(image->input_memory); - image->input_memory = NULL; - image->input_memory_size = 0; - } - - if (image->tmpfile_name[0] != 0 && (image->opts & KEEP_TMPFILES) == 0) - { - (void)remove(image->tmpfile_name); - image->tmpfile_name[0] = 0; - } -} - -/* This is actually a re-initializer; allows an image structure to be re-used by - * freeing everything that relates to an old image. - */ -static void initimage(Image *image, png_uint_32 opts, const char *file_name, - int stride_extra) -{ - freeimage(image); - memset(&image->image, 0, sizeof image->image); - image->opts = opts; - image->file_name = file_name; - image->stride_extra = stride_extra; -} - -/* Make sure the image buffer is big enough; allows re-use of the buffer if the - * image is re-read. - */ -#define BUFFER_INIT8 73 -static void -allocbuffer(Image *image) -{ - size_t size = PNG_IMAGE_BUFFER_SIZE(image->image, image->stride); - - if (size+32 > image->bufsize) - { - freebuffer(image); - image->buffer = voidcast(png_bytep, malloc(size+32)); - if (image->buffer == NULL) - { - fflush(stdout); - fprintf(stderr, - "simpletest: out of memory allocating %lu(+32) byte buffer\n", - (unsigned long)size); - exit(1); - } - image->bufsize = size+32; - } - - memset(image->buffer, 95, image->bufsize); - memset(image->buffer+16, BUFFER_INIT8, size); - image->allocsize = size; -} - -/* Make sure 16 bytes match the given byte. */ -static int -check16(png_const_bytep bp, int b) -{ - int i = 16; - - do - if (*bp != b) return 1; - while (--i); - - return 0; -} - -/* Check for overwrite in the image buffer. */ -static void -checkbuffer(Image *image, const char *arg) -{ - if (check16(image->buffer, 95)) - { - fflush(stdout); - fprintf(stderr, "%s: overwrite at start of image buffer\n", arg); - exit(1); - } - - if (check16(image->buffer+16+image->allocsize, 95)) - { - fflush(stdout); - fprintf(stderr, "%s: overwrite at end of image buffer\n", arg); - exit(1); - } -} - -/* ERROR HANDLING */ -/* Log a terminal error, also frees the libpng part of the image if necessary. - */ -static int -logerror(Image *image, const char *a1, const char *a2, const char *a3) -{ - fflush(stdout); - if (image->image.warning_or_error) - fprintf(stderr, "%s%s%s: %s\n", a1, a2, a3, image->image.message); - - else - fprintf(stderr, "%s%s%s\n", a1, a2, a3); - - if (image->image.opaque != NULL) - { - fprintf(stderr, "%s: image opaque pointer non-NULL on error\n", - image->file_name); - png_image_free(&image->image); - } - - return 0; -} - -/* Log an error and close a file (just a utility to do both things in one - * function call.) - */ -static int -logclose(Image *image, FILE *f, const char *name, const char *operation) -{ - int e = errno; - - fclose(f); - return logerror(image, name, operation, strerror(e)); -} - -/* Make sure the png_image has been freed - validates that libpng is doing what - * the spec says and freeing the image. - */ -static int -checkopaque(Image *image) -{ - if (image->image.opaque != NULL) - { - png_image_free(&image->image); - return logerror(image, image->file_name, ": opaque not NULL", ""); - } - - /* Separate out the gamma+background_rgb_to_gray warning because it may - * produce opaque component errors: - */ - else if (image->image.warning_or_error != 0 && - (strcmp(image->image.message, - "libpng does not support gamma+background+rgb_to_gray") == 0 ? - (image->opts & GBG_ERROR) != 0 : (image->opts & STRICT) != 0)) - return logerror(image, image->file_name, (image->opts & GBG_ERROR) != 0 ? - " --fault-gbg-warning" : " --strict", ""); - - else - return 1; -} - -/* IMAGE COMPARISON/CHECKING */ -/* Compare the pixels of two images, which should be the same but aren't. The - * images must have been checked for a size match. - */ -typedef struct -{ - /* The components, for grayscale images the gray value is in 'g' and if alpha - * is not present 'a' is set to 255 or 65535 according to format. - */ - int r, g, b, a; -} Pixel; - -typedef struct -{ - /* The background as the original sRGB 8-bit value converted to the final - * integer format and as a double precision linear value in the range 0..1 - * for with partially transparent pixels. - */ - int ir, ig, ib; - double dr, dg, db; /* linear r,g,b scaled to 0..1 */ -} Background; - -/* Basic image formats; control the data but not the layout thereof. */ -#define BASE_FORMATS\ - (PNG_FORMAT_FLAG_ALPHA|PNG_FORMAT_FLAG_COLOR|PNG_FORMAT_FLAG_LINEAR) - -/* Read a Pixel from a buffer. The code below stores the correct routine for - * the format in a function pointer, these are the routines: - */ -static void -gp_g8(Pixel *p, png_const_voidp pb) -{ - png_const_bytep pp = voidcast(png_const_bytep, pb); - - p->r = p->g = p->b = pp[0]; - p->a = 255; -} - -static void -gp_ga8(Pixel *p, png_const_voidp pb) -{ - png_const_bytep pp = voidcast(png_const_bytep, pb); - - p->r = p->g = p->b = pp[0]; - p->a = pp[1]; -} - -#ifdef PNG_FORMAT_AFIRST_SUPPORTED -static void -gp_ag8(Pixel *p, png_const_voidp pb) -{ - png_const_bytep pp = voidcast(png_const_bytep, pb); - - p->r = p->g = p->b = pp[1]; - p->a = pp[0]; -} -#endif - -static void -gp_rgb8(Pixel *p, png_const_voidp pb) -{ - png_const_bytep pp = voidcast(png_const_bytep, pb); - - p->r = pp[0]; - p->g = pp[1]; - p->b = pp[2]; - p->a = 255; -} - -#ifdef PNG_FORMAT_BGR_SUPPORTED -static void -gp_bgr8(Pixel *p, png_const_voidp pb) -{ - png_const_bytep pp = voidcast(png_const_bytep, pb); - - p->r = pp[2]; - p->g = pp[1]; - p->b = pp[0]; - p->a = 255; -} -#endif - -static void -gp_rgba8(Pixel *p, png_const_voidp pb) -{ - png_const_bytep pp = voidcast(png_const_bytep, pb); - - p->r = pp[0]; - p->g = pp[1]; - p->b = pp[2]; - p->a = pp[3]; -} - -#ifdef PNG_FORMAT_BGR_SUPPORTED -static void -gp_bgra8(Pixel *p, png_const_voidp pb) -{ - png_const_bytep pp = voidcast(png_const_bytep, pb); - - p->r = pp[2]; - p->g = pp[1]; - p->b = pp[0]; - p->a = pp[3]; -} -#endif - -#ifdef PNG_FORMAT_AFIRST_SUPPORTED -static void -gp_argb8(Pixel *p, png_const_voidp pb) -{ - png_const_bytep pp = voidcast(png_const_bytep, pb); - - p->r = pp[1]; - p->g = pp[2]; - p->b = pp[3]; - p->a = pp[0]; -} -#endif - -#if defined(PNG_FORMAT_AFIRST_SUPPORTED) && defined(PNG_FORMAT_BGR_SUPPORTED) -static void -gp_abgr8(Pixel *p, png_const_voidp pb) -{ - png_const_bytep pp = voidcast(png_const_bytep, pb); - - p->r = pp[3]; - p->g = pp[2]; - p->b = pp[1]; - p->a = pp[0]; -} -#endif - -static void -gp_g16(Pixel *p, png_const_voidp pb) -{ - png_const_uint_16p pp = voidcast(png_const_uint_16p, pb); - - p->r = p->g = p->b = pp[0]; - p->a = 65535; -} - -static void -gp_ga16(Pixel *p, png_const_voidp pb) -{ - png_const_uint_16p pp = voidcast(png_const_uint_16p, pb); - - p->r = p->g = p->b = pp[0]; - p->a = pp[1]; -} - -#ifdef PNG_FORMAT_AFIRST_SUPPORTED -static void -gp_ag16(Pixel *p, png_const_voidp pb) -{ - png_const_uint_16p pp = voidcast(png_const_uint_16p, pb); - - p->r = p->g = p->b = pp[1]; - p->a = pp[0]; -} -#endif - -static void -gp_rgb16(Pixel *p, png_const_voidp pb) -{ - png_const_uint_16p pp = voidcast(png_const_uint_16p, pb); - - p->r = pp[0]; - p->g = pp[1]; - p->b = pp[2]; - p->a = 65535; -} - -#ifdef PNG_FORMAT_BGR_SUPPORTED -static void -gp_bgr16(Pixel *p, png_const_voidp pb) -{ - png_const_uint_16p pp = voidcast(png_const_uint_16p, pb); - - p->r = pp[2]; - p->g = pp[1]; - p->b = pp[0]; - p->a = 65535; -} -#endif - -static void -gp_rgba16(Pixel *p, png_const_voidp pb) -{ - png_const_uint_16p pp = voidcast(png_const_uint_16p, pb); - - p->r = pp[0]; - p->g = pp[1]; - p->b = pp[2]; - p->a = pp[3]; -} - -#ifdef PNG_FORMAT_BGR_SUPPORTED -static void -gp_bgra16(Pixel *p, png_const_voidp pb) -{ - png_const_uint_16p pp = voidcast(png_const_uint_16p, pb); - - p->r = pp[2]; - p->g = pp[1]; - p->b = pp[0]; - p->a = pp[3]; -} -#endif - -#ifdef PNG_FORMAT_AFIRST_SUPPORTED -static void -gp_argb16(Pixel *p, png_const_voidp pb) -{ - png_const_uint_16p pp = voidcast(png_const_uint_16p, pb); - - p->r = pp[1]; - p->g = pp[2]; - p->b = pp[3]; - p->a = pp[0]; -} -#endif - -#if defined(PNG_FORMAT_AFIRST_SUPPORTED) && defined(PNG_FORMAT_BGR_SUPPORTED) -static void -gp_abgr16(Pixel *p, png_const_voidp pb) -{ - png_const_uint_16p pp = voidcast(png_const_uint_16p, pb); - - p->r = pp[3]; - p->g = pp[2]; - p->b = pp[1]; - p->a = pp[0]; -} -#endif - -/* Given a format, return the correct one of the above functions. */ -static void (* -get_pixel(png_uint_32 format))(Pixel *p, png_const_voidp pb) -{ - /* The color-map flag is irrelevant here - the caller of the function - * returned must either pass the buffer or, for a color-mapped image, the - * correct entry in the color-map. - */ - if (format & PNG_FORMAT_FLAG_LINEAR) - { - if (format & PNG_FORMAT_FLAG_COLOR) - { -# ifdef PNG_FORMAT_BGR_SUPPORTED - if (format & PNG_FORMAT_FLAG_BGR) - { - if (format & PNG_FORMAT_FLAG_ALPHA) - { -# ifdef PNG_FORMAT_AFIRST_SUPPORTED - if (format & PNG_FORMAT_FLAG_AFIRST) - return gp_abgr16; - - else -# endif - return gp_bgra16; - } - - else - return gp_bgr16; - } - - else -# endif - { - if (format & PNG_FORMAT_FLAG_ALPHA) - { -# ifdef PNG_FORMAT_AFIRST_SUPPORTED - if (format & PNG_FORMAT_FLAG_AFIRST) - return gp_argb16; - - else -# endif - return gp_rgba16; - } - - else - return gp_rgb16; - } - } - - else - { - if (format & PNG_FORMAT_FLAG_ALPHA) - { -# ifdef PNG_FORMAT_AFIRST_SUPPORTED - if (format & PNG_FORMAT_FLAG_AFIRST) - return gp_ag16; - - else -# endif - return gp_ga16; - } - - else - return gp_g16; - } - } - - else - { - if (format & PNG_FORMAT_FLAG_COLOR) - { -# ifdef PNG_FORMAT_BGR_SUPPORTED - if (format & PNG_FORMAT_FLAG_BGR) - { - if (format & PNG_FORMAT_FLAG_ALPHA) - { -# ifdef PNG_FORMAT_AFIRST_SUPPORTED - if (format & PNG_FORMAT_FLAG_AFIRST) - return gp_abgr8; - - else -# endif - return gp_bgra8; - } - - else - return gp_bgr8; - } - - else -# endif - { - if (format & PNG_FORMAT_FLAG_ALPHA) - { -# ifdef PNG_FORMAT_AFIRST_SUPPORTED - if (format & PNG_FORMAT_FLAG_AFIRST) - return gp_argb8; - - else -# endif - return gp_rgba8; - } - - else - return gp_rgb8; - } - } - - else - { - if (format & PNG_FORMAT_FLAG_ALPHA) - { -# ifdef PNG_FORMAT_AFIRST_SUPPORTED - if (format & PNG_FORMAT_FLAG_AFIRST) - return gp_ag8; - - else -# endif - return gp_ga8; - } - - else - return gp_g8; - } - } -} - -/* Conversion between pixel formats. The code above effectively eliminates the - * component ordering changes leaving three basic changes: - * - * 1) Remove an alpha channel by pre-multiplication or compositing on a - * background color. (Adding an alpha channel is a no-op.) - * - * 2) Remove color by mapping to grayscale. (Grayscale to color is a no-op.) - * - * 3) Convert between 8-bit and 16-bit components. (Both directtions are - * relevant.) - * - * This gives the following base format conversion matrix: - * - * OUT: ----- 8-bit ----- ----- 16-bit ----- - * IN G GA RGB RGBA G GA RGB RGBA - * 8 G . . . . lin lin lin lin - * 8 GA bckg . bckc . pre' pre pre' pre - * 8 RGB g8 g8 . . glin glin lin lin - * 8 RGBA g8b g8 bckc . gpr' gpre pre' pre - * 16 G sRGB sRGB sRGB sRGB . . . . - * 16 GA b16g unpg b16c unpc A . A . - * 16 RGB sG sG sRGB sRGB g16 g16 . . - * 16 RGBA gb16 sGp cb16 sCp g16 g16' A . - * - * 8-bit to 8-bit: - * bckg: composite on gray background - * bckc: composite on color background - * g8: convert sRGB components to sRGB grayscale - * g8b: convert sRGB components to grayscale and composite on gray background - * - * 8-bit to 16-bit: - * lin: make sRGB components linear, alpha := 65535 - * pre: make sRGB components linear and premultiply by alpha (scale alpha) - * pre': as 'pre' but alpha := 65535 - * glin: make sRGB components linear, convert to grayscale, alpha := 65535 - * gpre: make sRGB components grayscale and linear and premultiply by alpha - * gpr': as 'gpre' but alpha := 65535 - * - * 16-bit to 8-bit: - * sRGB: convert linear components to sRGB, alpha := 255 - * unpg: unpremultiply gray component and convert to sRGB (scale alpha) - * unpc: unpremultiply color components and convert to sRGB (scale alpha) - * b16g: composite linear onto gray background and convert the result to sRGB - * b16c: composite linear onto color background and convert the result to sRGB - * sG: convert linear RGB to sRGB grayscale - * sGp: unpremultiply RGB then convert to sRGB grayscale - * sCp: unpremultiply RGB then convert to sRGB - * gb16: composite linear onto background and convert to sRGB grayscale - * (order doesn't matter, the composite and grayscale operations permute) - * cb16: composite linear onto background and convert to sRGB - * - * 16-bit to 16-bit: - * A: set alpha to 65535 - * g16: convert linear RGB to linear grayscale (alpha := 65535) - * g16': as 'g16' but alpha is unchanged - */ -/* Simple copy: */ -static void -gpc_noop(Pixel *out, const Pixel *in, const Background *back) -{ - (void)back; - out->r = in->r; - out->g = in->g; - out->b = in->b; - out->a = in->a; -} - -#if ALLOW_UNUSED_GPC -static void -gpc_nop8(Pixel *out, const Pixel *in, const Background *back) -{ - (void)back; - if (in->a == 0) - out->r = out->g = out->b = 255; - - else - { - out->r = in->r; - out->g = in->g; - out->b = in->b; - } - - out->a = in->a; -} -#endif - -#if ALLOW_UNUSED_GPC -static void -gpc_nop6(Pixel *out, const Pixel *in, const Background *back) -{ - (void)back; - if (in->a == 0) - out->r = out->g = out->b = 65535; - - else - { - out->r = in->r; - out->g = in->g; - out->b = in->b; - } - - out->a = in->a; -} -#endif - -/* 8-bit to 8-bit conversions */ -/* bckg: composite on gray background */ -static void -gpc_bckg(Pixel *out, const Pixel *in, const Background *back) -{ - if (in->a <= 0) - out->r = out->g = out->b = back->ig; - - else if (in->a >= 255) - out->r = out->g = out->b = in->g; - - else - { - double a = in->a / 255.; - - out->r = out->g = out->b = sRGB(sRGB_to_d[in->g] * a + back->dg * (1-a)); - } - - out->a = 255; -} - -/* bckc: composite on color background */ -static void -gpc_bckc(Pixel *out, const Pixel *in, const Background *back) -{ - if (in->a <= 0) - { - out->r = back->ir; - out->g = back->ig; - out->b = back->ib; - } - - else if (in->a >= 255) - { - out->r = in->r; - out->g = in->g; - out->b = in->b; - } - - else - { - double a = in->a / 255.; - - out->r = sRGB(sRGB_to_d[in->r] * a + back->dr * (1-a)); - out->g = sRGB(sRGB_to_d[in->g] * a + back->dg * (1-a)); - out->b = sRGB(sRGB_to_d[in->b] * a + back->db * (1-a)); - } - - out->a = 255; -} - -/* g8: convert sRGB components to sRGB grayscale */ -static void -gpc_g8(Pixel *out, const Pixel *in, const Background *back) -{ - (void)back; - - if (in->r == in->g && in->g == in->b) - out->r = out->g = out->b = in->g; - - else - out->r = out->g = out->b = - sRGB(YfromRGB(sRGB_to_d[in->r], sRGB_to_d[in->g], sRGB_to_d[in->b])); - - out->a = in->a; -} - -/* g8b: convert sRGB components to grayscale and composite on gray background */ -static void -gpc_g8b(Pixel *out, const Pixel *in, const Background *back) -{ - if (in->a <= 0) - out->r = out->g = out->b = back->ig; - - else if (in->a >= 255) - { - if (in->r == in->g && in->g == in->b) - out->r = out->g = out->b = in->g; - - else - out->r = out->g = out->b = sRGB(YfromRGB( - sRGB_to_d[in->r], sRGB_to_d[in->g], sRGB_to_d[in->b])); - } - - else - { - double a = in->a/255.; - - out->r = out->g = out->b = sRGB(a * YfromRGB(sRGB_to_d[in->r], - sRGB_to_d[in->g], sRGB_to_d[in->b]) + back->dg * (1-a)); - } - - out->a = 255; -} - -/* 8-bit to 16-bit conversions */ -/* lin: make sRGB components linear, alpha := 65535 */ -static void -gpc_lin(Pixel *out, const Pixel *in, const Background *back) -{ - (void)back; - - out->r = ilinear(in->r); - - if (in->g == in->r) - { - out->g = out->r; - - if (in->b == in->r) - out->b = out->r; - - else - out->b = ilinear(in->b); - } - - else - { - out->g = ilinear(in->g); - - if (in->b == in->r) - out->b = out->r; - - else if (in->b == in->g) - out->b = out->g; - - else - out->b = ilinear(in->b); - } - - out->a = 65535; -} - -/* pre: make sRGB components linear and premultiply by alpha (scale alpha) */ -static void -gpc_pre(Pixel *out, const Pixel *in, const Background *back) -{ - (void)back; - - out->r = ilineara(in->r, in->a); - - if (in->g == in->r) - { - out->g = out->r; - - if (in->b == in->r) - out->b = out->r; - - else - out->b = ilineara(in->b, in->a); - } - - else - { - out->g = ilineara(in->g, in->a); - - if (in->b == in->r) - out->b = out->r; - - else if (in->b == in->g) - out->b = out->g; - - else - out->b = ilineara(in->b, in->a); - } - - out->a = in->a * 257; -} - -/* pre': as 'pre' but alpha := 65535 */ -static void -gpc_preq(Pixel *out, const Pixel *in, const Background *back) -{ - (void)back; - - out->r = ilineara(in->r, in->a); - - if (in->g == in->r) - { - out->g = out->r; - - if (in->b == in->r) - out->b = out->r; - - else - out->b = ilineara(in->b, in->a); - } - - else - { - out->g = ilineara(in->g, in->a); - - if (in->b == in->r) - out->b = out->r; - - else if (in->b == in->g) - out->b = out->g; - - else - out->b = ilineara(in->b, in->a); - } - - out->a = 65535; -} - -/* glin: make sRGB components linear, convert to grayscale, alpha := 65535 */ -static void -gpc_glin(Pixel *out, const Pixel *in, const Background *back) -{ - (void)back; - - if (in->r == in->g && in->g == in->b) - out->r = out->g = out->b = ilinear(in->g); - - else - out->r = out->g = out->b = u16d(65535 * - YfromRGB(sRGB_to_d[in->r], sRGB_to_d[in->g], sRGB_to_d[in->b])); - - out->a = 65535; -} - -/* gpre: make sRGB components grayscale and linear and premultiply by alpha */ -static void -gpc_gpre(Pixel *out, const Pixel *in, const Background *back) -{ - (void)back; - - if (in->r == in->g && in->g == in->b) - out->r = out->g = out->b = ilineara(in->g, in->a); - - else - out->r = out->g = out->b = u16d(in->a * 257 * - YfromRGB(sRGB_to_d[in->r], sRGB_to_d[in->g], sRGB_to_d[in->b])); - - out->a = 257 * in->a; -} - -/* gpr': as 'gpre' but alpha := 65535 */ -static void -gpc_gprq(Pixel *out, const Pixel *in, const Background *back) -{ - (void)back; - - if (in->r == in->g && in->g == in->b) - out->r = out->g = out->b = ilineara(in->g, in->a); - - else - out->r = out->g = out->b = u16d(in->a * 257 * - YfromRGB(sRGB_to_d[in->r], sRGB_to_d[in->g], sRGB_to_d[in->b])); - - out->a = 65535; -} - -/* 8-bit to 16-bit conversions for gAMA 45455 encoded values */ -/* Lin: make gAMA 45455 components linear, alpha := 65535 */ -static void -gpc_Lin(Pixel *out, const Pixel *in, const Background *back) -{ - (void)back; - - out->r = ilinear_g22(in->r); - - if (in->g == in->r) - { - out->g = out->r; - - if (in->b == in->r) - out->b = out->r; - - else - out->b = ilinear_g22(in->b); - } - - else - { - out->g = ilinear_g22(in->g); - - if (in->b == in->r) - out->b = out->r; - - else if (in->b == in->g) - out->b = out->g; - - else - out->b = ilinear_g22(in->b); - } - - out->a = 65535; -} - -#if ALLOW_UNUSED_GPC -/* Pre: make gAMA 45455 components linear and premultiply by alpha (scale alpha) - */ -static void -gpc_Pre(Pixel *out, const Pixel *in, const Background *back) -{ - (void)back; - - out->r = ilineara_g22(in->r, in->a); - - if (in->g == in->r) - { - out->g = out->r; - - if (in->b == in->r) - out->b = out->r; - - else - out->b = ilineara_g22(in->b, in->a); - } - - else - { - out->g = ilineara_g22(in->g, in->a); - - if (in->b == in->r) - out->b = out->r; - - else if (in->b == in->g) - out->b = out->g; - - else - out->b = ilineara_g22(in->b, in->a); - } - - out->a = in->a * 257; -} -#endif - -#if ALLOW_UNUSED_GPC -/* Pre': as 'Pre' but alpha := 65535 */ -static void -gpc_Preq(Pixel *out, const Pixel *in, const Background *back) -{ - (void)back; - - out->r = ilineara_g22(in->r, in->a); - - if (in->g == in->r) - { - out->g = out->r; - - if (in->b == in->r) - out->b = out->r; - - else - out->b = ilineara_g22(in->b, in->a); - } - - else - { - out->g = ilineara_g22(in->g, in->a); - - if (in->b == in->r) - out->b = out->r; - - else if (in->b == in->g) - out->b = out->g; - - else - out->b = ilineara_g22(in->b, in->a); - } - - out->a = 65535; -} -#endif - -#if ALLOW_UNUSED_GPC -/* Glin: make gAMA 45455 components linear, convert to grayscale, alpha := 65535 - */ -static void -gpc_Glin(Pixel *out, const Pixel *in, const Background *back) -{ - (void)back; - - if (in->r == in->g && in->g == in->b) - out->r = out->g = out->b = ilinear_g22(in->g); - - else - out->r = out->g = out->b = u16d(65535 * - YfromRGB(g22_to_d[in->r], g22_to_d[in->g], g22_to_d[in->b])); - - out->a = 65535; -} -#endif - -#if ALLOW_UNUSED_GPC -/* Gpre: make gAMA 45455 components grayscale and linear and premultiply by - * alpha. - */ -static void -gpc_Gpre(Pixel *out, const Pixel *in, const Background *back) -{ - (void)back; - - if (in->r == in->g && in->g == in->b) - out->r = out->g = out->b = ilineara_g22(in->g, in->a); - - else - out->r = out->g = out->b = u16d(in->a * 257 * - YfromRGB(g22_to_d[in->r], g22_to_d[in->g], g22_to_d[in->b])); - - out->a = 257 * in->a; -} -#endif - -#if ALLOW_UNUSED_GPC -/* Gpr': as 'Gpre' but alpha := 65535 */ -static void -gpc_Gprq(Pixel *out, const Pixel *in, const Background *back) -{ - (void)back; - - if (in->r == in->g && in->g == in->b) - out->r = out->g = out->b = ilineara_g22(in->g, in->a); - - else - out->r = out->g = out->b = u16d(in->a * 257 * - YfromRGB(g22_to_d[in->r], g22_to_d[in->g], g22_to_d[in->b])); - - out->a = 65535; -} -#endif - -/* 16-bit to 8-bit conversions */ -/* sRGB: convert linear components to sRGB, alpha := 255 */ -static void -gpc_sRGB(Pixel *out, const Pixel *in, const Background *back) -{ - (void)back; - - out->r = isRGB(in->r); - - if (in->g == in->r) - { - out->g = out->r; - - if (in->b == in->r) - out->b = out->r; - - else - out->b = isRGB(in->b); - } - - else - { - out->g = isRGB(in->g); - - if (in->b == in->r) - out->b = out->r; - - else if (in->b == in->g) - out->b = out->g; - - else - out->b = isRGB(in->b); - } - - out->a = 255; -} - -/* unpg: unpremultiply gray component and convert to sRGB (scale alpha) */ -static void -gpc_unpg(Pixel *out, const Pixel *in, const Background *back) -{ - (void)back; - - if (in->a <= 128) - { - out->r = out->g = out->b = 255; - out->a = 0; - } - - else - { - out->r = out->g = out->b = sRGB((double)in->g / in->a); - out->a = u8d(in->a / 257.); - } -} - -/* unpc: unpremultiply color components and convert to sRGB (scale alpha) */ -static void -gpc_unpc(Pixel *out, const Pixel *in, const Background *back) -{ - (void)back; - - if (in->a <= 128) - { - out->r = out->g = out->b = 255; - out->a = 0; - } - - else - { - out->r = sRGB((double)in->r / in->a); - out->g = sRGB((double)in->g / in->a); - out->b = sRGB((double)in->b / in->a); - out->a = u8d(in->a / 257.); - } -} - -/* b16g: composite linear onto gray background and convert the result to sRGB */ -static void -gpc_b16g(Pixel *out, const Pixel *in, const Background *back) -{ - if (in->a <= 0) - out->r = out->g = out->b = back->ig; - - else - { - double a = in->a/65535.; - double a1 = 1-a; - - a /= 65535; - out->r = out->g = out->b = sRGB(in->g * a + back->dg * a1); - } - - out->a = 255; -} - -/* b16c: composite linear onto color background and convert the result to sRGB*/ -static void -gpc_b16c(Pixel *out, const Pixel *in, const Background *back) -{ - if (in->a <= 0) - { - out->r = back->ir; - out->g = back->ig; - out->b = back->ib; - } - - else - { - double a = in->a/65535.; - double a1 = 1-a; - - a /= 65535; - out->r = sRGB(in->r * a + back->dr * a1); - out->g = sRGB(in->g * a + back->dg * a1); - out->b = sRGB(in->b * a + back->db * a1); - } - - out->a = 255; -} - -/* sG: convert linear RGB to sRGB grayscale */ -static void -gpc_sG(Pixel *out, const Pixel *in, const Background *back) -{ - (void)back; - - out->r = out->g = out->b = sRGB(YfromRGBint(in->r, in->g, in->b)/65535); - out->a = 255; -} - -/* sGp: unpremultiply RGB then convert to sRGB grayscale */ -static void -gpc_sGp(Pixel *out, const Pixel *in, const Background *back) -{ - (void)back; - - if (in->a <= 128) - { - out->r = out->g = out->b = 255; - out->a = 0; - } - - else - { - out->r = out->g = out->b = sRGB(YfromRGBint(in->r, in->g, in->b)/in->a); - out->a = u8d(in->a / 257.); - } -} - -/* sCp: unpremultiply RGB then convert to sRGB */ -static void -gpc_sCp(Pixel *out, const Pixel *in, const Background *back) -{ - (void)back; - - if (in->a <= 128) - { - out->r = out->g = out->b = 255; - out->a = 0; - } - - else - { - out->r = sRGB((double)in->r / in->a); - out->g = sRGB((double)in->g / in->a); - out->b = sRGB((double)in->b / in->a); - out->a = u8d(in->a / 257.); - } -} - -/* gb16: composite linear onto background and convert to sRGB grayscale */ -/* (order doesn't matter, the composite and grayscale operations permute) */ -static void -gpc_gb16(Pixel *out, const Pixel *in, const Background *back) -{ - if (in->a <= 0) - out->r = out->g = out->b = back->ig; - - else if (in->a >= 65535) - out->r = out->g = out->b = isRGB(in->g); - - else - { - double a = in->a / 65535.; - double a1 = 1-a; - - a /= 65535; - out->r = out->g = out->b = sRGB(in->g * a + back->dg * a1); - } - - out->a = 255; -} - -/* cb16: composite linear onto background and convert to sRGB */ -static void -gpc_cb16(Pixel *out, const Pixel *in, const Background *back) -{ - if (in->a <= 0) - { - out->r = back->ir; - out->g = back->ig; - out->b = back->ib; - } - - else if (in->a >= 65535) - { - out->r = isRGB(in->r); - out->g = isRGB(in->g); - out->b = isRGB(in->b); - } - - else - { - double a = in->a / 65535.; - double a1 = 1-a; - - a /= 65535; - out->r = sRGB(in->r * a + back->dr * a1); - out->g = sRGB(in->g * a + back->dg * a1); - out->b = sRGB(in->b * a + back->db * a1); - } - - out->a = 255; -} - -/* 16-bit to 16-bit conversions */ -/* A: set alpha to 65535 */ -static void -gpc_A(Pixel *out, const Pixel *in, const Background *back) -{ - (void)back; - out->r = in->r; - out->g = in->g; - out->b = in->b; - out->a = 65535; -} - -/* g16: convert linear RGB to linear grayscale (alpha := 65535) */ -static void -gpc_g16(Pixel *out, const Pixel *in, const Background *back) -{ - (void)back; - out->r = out->g = out->b = u16d(YfromRGBint(in->r, in->g, in->b)); - out->a = 65535; -} - -/* g16': as 'g16' but alpha is unchanged */ -static void -gpc_g16q(Pixel *out, const Pixel *in, const Background *back) -{ - (void)back; - out->r = out->g = out->b = u16d(YfromRGBint(in->r, in->g, in->b)); - out->a = in->a; -} - -#if ALLOW_UNUSED_GPC -/* Unused functions (to hide them from GCC unused function warnings) */ -void (* const gpc_unused[]) - (Pixel *out, const Pixel *in, const Background *back) = -{ - gpc_Pre, gpc_Preq, gpc_Glin, gpc_Gpre, gpc_Gprq, gpc_nop8, gpc_nop6 -}; -#endif - -/* OUT: ----- 8-bit ----- ----- 16-bit ----- - * IN G GA RGB RGBA G GA RGB RGBA - * 8 G . . . . lin lin lin lin - * 8 GA bckg . bckc . pre' pre pre' pre - * 8 RGB g8 g8 . . glin glin lin lin - * 8 RGBA g8b g8 bckc . gpr' gpre pre' pre - * 16 G sRGB sRGB sRGB sRGB . . . . - * 16 GA b16g unpg b16c unpc A . A . - * 16 RGB sG sG sRGB sRGB g16 g16 . . - * 16 RGBA gb16 sGp cb16 sCp g16 g16' A . - * - * The matrix is held in an array indexed thus: - * - * gpc_fn[out_format & BASE_FORMATS][in_format & BASE_FORMATS]; - */ -/* This will produce a compile time error if the FORMAT_FLAG values don't - * match the above matrix! - */ -#if PNG_FORMAT_FLAG_ALPHA == 1 && PNG_FORMAT_FLAG_COLOR == 2 &&\ - PNG_FORMAT_FLAG_LINEAR == 4 -static void (* const gpc_fn[8/*in*/][8/*out*/]) - (Pixel *out, const Pixel *in, const Background *back) = -{ -/*out: G-8 GA-8 RGB-8 RGBA-8 G-16 GA-16 RGB-16 RGBA-16 */ - {gpc_noop,gpc_noop,gpc_noop,gpc_noop, gpc_Lin, gpc_Lin, gpc_Lin, gpc_Lin }, - {gpc_bckg,gpc_noop,gpc_bckc,gpc_noop, gpc_preq,gpc_pre, gpc_preq,gpc_pre }, - {gpc_g8, gpc_g8, gpc_noop,gpc_noop, gpc_glin,gpc_glin,gpc_lin, gpc_lin }, - {gpc_g8b, gpc_g8, gpc_bckc,gpc_noop, gpc_gprq,gpc_gpre,gpc_preq,gpc_pre }, - {gpc_sRGB,gpc_sRGB,gpc_sRGB,gpc_sRGB, gpc_noop,gpc_noop,gpc_noop,gpc_noop}, - {gpc_b16g,gpc_unpg,gpc_b16c,gpc_unpc, gpc_A, gpc_noop,gpc_A, gpc_noop}, - {gpc_sG, gpc_sG, gpc_sRGB,gpc_sRGB, gpc_g16, gpc_g16, gpc_noop,gpc_noop}, - {gpc_gb16,gpc_sGp, gpc_cb16,gpc_sCp, gpc_g16, gpc_g16q,gpc_A, gpc_noop} -}; - -/* The array is repeated for the cases where both the input and output are color - * mapped because then different algorithms are used. - */ -static void (* const gpc_fn_colormapped[8/*in*/][8/*out*/]) - (Pixel *out, const Pixel *in, const Background *back) = -{ -/*out: G-8 GA-8 RGB-8 RGBA-8 G-16 GA-16 RGB-16 RGBA-16 */ - {gpc_noop,gpc_noop,gpc_noop,gpc_noop, gpc_lin, gpc_lin, gpc_lin, gpc_lin }, - {gpc_bckg,gpc_noop,gpc_bckc,gpc_noop, gpc_preq,gpc_pre, gpc_preq,gpc_pre }, - {gpc_g8, gpc_g8, gpc_noop,gpc_noop, gpc_glin,gpc_glin,gpc_lin, gpc_lin }, - {gpc_g8b, gpc_g8, gpc_bckc,gpc_noop, gpc_gprq,gpc_gpre,gpc_preq,gpc_pre }, - {gpc_sRGB,gpc_sRGB,gpc_sRGB,gpc_sRGB, gpc_noop,gpc_noop,gpc_noop,gpc_noop}, - {gpc_b16g,gpc_unpg,gpc_b16c,gpc_unpc, gpc_A, gpc_noop,gpc_A, gpc_noop}, - {gpc_sG, gpc_sG, gpc_sRGB,gpc_sRGB, gpc_g16, gpc_g16, gpc_noop,gpc_noop}, - {gpc_gb16,gpc_sGp, gpc_cb16,gpc_sCp, gpc_g16, gpc_g16q,gpc_A, gpc_noop} -}; - -/* The error arrays record the error in the same matrix; 64 entries, however - * the different algorithms used in libpng for colormap and direct conversions - * mean that four separate matrices are used (for each combination of - * colormapped and direct.) - * - * In some cases the conversion between sRGB formats goes via a linear - * intermediate; an sRGB to linear conversion (as above) is followed by a simple - * linear to sRGB step with no other conversions. This is done by a separate - * error array from an arbitrary 'in' format to one of the four basic outputs - * (since final output is always sRGB not colormapped). - * - * These arrays may be modified if the --accumulate flag is set during the run; - * then instead of logging errors they are simply added in. - * - * The three entries are currently for transparent, partially transparent and - * opaque input pixel values. Notice that alpha should be exact in each case. - * - * Errors in alpha should only occur when converting from a direct format - * to a colormapped format, when alpha is effectively smashed (so large - * errors can occur.) There should be no error in the '0' and 'opaque' - * values. The fourth entry in the array is used for the alpha error (and it - * should always be zero for the 'via linear' case since this is never color - * mapped.) - * - * Mapping to a colormap smashes the colors, it is necessary to have separate - * values for these cases because they are much larger; it is very much - * impossible to obtain a reasonable result, these are held in - * gpc_error_to_colormap. - */ -#if PNG_FORMAT_FLAG_COLORMAP == 8 /* extra check also required */ -# include "pngstest-errors.h" /* machine generated */ -#endif /* COLORMAP flag check */ -#endif /* flag checks */ - -typedef struct -{ - /* Basic pixel information: */ - Image* in_image; /* Input image */ - const Image* out_image; /* Output image */ - - /* 'background' is the value passed to the gpc_ routines, it may be NULL if - * it should not be used (*this* program has an error if it crashes as a - * result!) - */ - Background background_color; - const Background* background; - - /* Precalculated values: */ - int in_opaque; /* Value of input alpha that is opaque */ - int is_palette; /* Sample values come from the palette */ - int accumulate; /* Accumulate component errors (don't log) */ - int output_8bit; /* Output is 8-bit (else 16-bit) */ - - void (*in_gp)(Pixel*, png_const_voidp); - void (*out_gp)(Pixel*, png_const_voidp); - - void (*transform)(Pixel *out, const Pixel *in, const Background *back); - /* A function to perform the required transform */ - - void (*from_linear)(Pixel *out, const Pixel *in, const Background *back); - /* For 'via_linear' transforms the final, from linear, step, else NULL */ - - png_uint_16 error[4]; - /* Three error values for transparent, partially transparent and opaque - * input pixels (in turn). - */ - - png_uint_16 *error_ptr; - /* Where these are stored in the static array (for 'accumulate') */ -} -Transform; - -/* Return a 'transform' as above for the given format conversion. */ -static void -transform_from_formats(Transform *result, Image *in_image, - const Image *out_image, png_const_colorp background, int via_linear) -{ - png_uint_32 in_format, out_format; - png_uint_32 in_base, out_base; - - memset(result, 0, sizeof *result); - - /* Store the original images for error messages */ - result->in_image = in_image; - result->out_image = out_image; - - in_format = in_image->image.format; - out_format = out_image->image.format; - - if (in_format & PNG_FORMAT_FLAG_LINEAR) - result->in_opaque = 65535; - else - result->in_opaque = 255; - - result->output_8bit = (out_format & PNG_FORMAT_FLAG_LINEAR) == 0; - - result->is_palette = 0; /* set by caller if required */ - result->accumulate = (in_image->opts & ACCUMULATE) != 0; - - /* The loaders (which need the ordering information) */ - result->in_gp = get_pixel(in_format); - result->out_gp = get_pixel(out_format); - - /* Remove the ordering information: */ - in_format &= BASE_FORMATS | PNG_FORMAT_FLAG_COLORMAP; - in_base = in_format & BASE_FORMATS; - out_format &= BASE_FORMATS | PNG_FORMAT_FLAG_COLORMAP; - out_base = out_format & BASE_FORMATS; - - if (via_linear) - { - /* Check for an error in this program: */ - if (out_format & (PNG_FORMAT_FLAG_LINEAR|PNG_FORMAT_FLAG_COLORMAP)) - { - fprintf(stderr, "internal transform via linear error 0x%x->0x%x\n", - in_format, out_format); - exit(1); - } - - result->transform = gpc_fn[in_base][out_base | PNG_FORMAT_FLAG_LINEAR]; - result->from_linear = gpc_fn[out_base | PNG_FORMAT_FLAG_LINEAR][out_base]; - result->error_ptr = gpc_error_via_linear[in_format][out_format]; - } - - else if (~in_format & out_format & PNG_FORMAT_FLAG_COLORMAP) - { - /* The input is not colormapped but the output is, the errors will - * typically be large (only the grayscale-no-alpha case permits preserving - * even 8-bit values.) - */ - result->transform = gpc_fn[in_base][out_base]; - result->from_linear = NULL; - result->error_ptr = gpc_error_to_colormap[in_base][out_base]; - } - - else - { - /* The caller handles the colormap->pixel value conversion, so the - * transform function just gets a pixel value, however because libpng - * currently contains a different implementation for mapping a colormap if - * both input and output are colormapped we need different conversion - * functions to deal with errors in the libpng implementation. - */ - if (in_format & out_format & PNG_FORMAT_FLAG_COLORMAP) - result->transform = gpc_fn_colormapped[in_base][out_base]; - else - result->transform = gpc_fn[in_base][out_base]; - result->from_linear = NULL; - result->error_ptr = gpc_error[in_format][out_format]; - } - - /* Follow the libpng simplified API rules to work out what to pass to the gpc - * routines as a background value, if one is not required pass NULL so that - * this program crashes in the even of a programming error. - */ - result->background = NULL; /* default: not required */ - - /* Rule 1: background only need be supplied if alpha is to be removed */ - if (in_format & ~out_format & PNG_FORMAT_FLAG_ALPHA) - { - /* The input value is 'NULL' to use the background and (otherwise) an sRGB - * background color (to use a solid color). The code above uses a fixed - * byte value, BUFFER_INIT8, for buffer even for 16-bit output. For - * linear (16-bit) output the sRGB background color is ignored; the - * composition is always on the background (so BUFFER_INIT8 * 257), except - * that for the colormap (i.e. linear colormapped output) black is used. - */ - result->background = &result->background_color; - - if (out_format & PNG_FORMAT_FLAG_LINEAR || via_linear) - { - if (out_format & PNG_FORMAT_FLAG_COLORMAP) - { - result->background_color.ir = - result->background_color.ig = - result->background_color.ib = 0; - result->background_color.dr = - result->background_color.dg = - result->background_color.db = 0; - } - - else - { - result->background_color.ir = - result->background_color.ig = - result->background_color.ib = BUFFER_INIT8 * 257; - result->background_color.dr = - result->background_color.dg = - result->background_color.db = 0; - } - } - - else /* sRGB output */ - { - if (background != NULL) - { - if (out_format & PNG_FORMAT_FLAG_COLOR) - { - result->background_color.ir = background->red; - result->background_color.ig = background->green; - result->background_color.ib = background->blue; - /* TODO: sometimes libpng uses the power law conversion here, how - * to handle this? - */ - result->background_color.dr = sRGB_to_d[background->red]; - result->background_color.dg = sRGB_to_d[background->green]; - result->background_color.db = sRGB_to_d[background->blue]; - } - - else /* grayscale: libpng only looks at 'g' */ - { - result->background_color.ir = - result->background_color.ig = - result->background_color.ib = background->green; - /* TODO: sometimes libpng uses the power law conversion here, how - * to handle this? - */ - result->background_color.dr = - result->background_color.dg = - result->background_color.db = sRGB_to_d[background->green]; - } - } - - else if ((out_format & PNG_FORMAT_FLAG_COLORMAP) == 0) - { - result->background_color.ir = - result->background_color.ig = - result->background_color.ib = BUFFER_INIT8; - /* TODO: sometimes libpng uses the power law conversion here, how - * to handle this? - */ - result->background_color.dr = - result->background_color.dg = - result->background_color.db = sRGB_to_d[BUFFER_INIT8]; - } - - /* Else the output is colormapped and a background color must be - * provided; if pngstest crashes then that is a bug in this program - * (though libpng should png_error as well.) - */ - else - result->background = NULL; - } - } - - if (result->background == NULL) - { - result->background_color.ir = - result->background_color.ig = - result->background_color.ib = -1; /* not used */ - result->background_color.dr = - result->background_color.dg = - result->background_color.db = 1E30; /* not used */ - } - - - /* Copy the error values into the Transform: */ - result->error[0] = result->error_ptr[0]; - result->error[1] = result->error_ptr[1]; - result->error[2] = result->error_ptr[2]; - result->error[3] = result->error_ptr[3]; -} - - -/* Compare two pixels. - * - * OLD error values: -static int error_to_linear = 811; * by experiment * -static int error_to_linear_grayscale = 424; * by experiment * -static int error_to_sRGB = 6; * by experiment * -static int error_to_sRGB_grayscale = 17; * libpng error by calculation + - 2 by experiment * -static int error_in_compose = 2; * by experiment * -static int error_in_premultiply = 1; - * - * The following is *just* the result of a round trip from 8-bit sRGB to linear - * then back to 8-bit sRGB when it is done by libpng. There are two problems: - * - * 1) libpng currently uses a 2.2 power law with no linear segment, this results - * in instability in the low values and even with 16-bit precision sRGB(1) ends - * up mapping to sRGB(0) as a result of rounding in the 16-bit representation. - * This gives an error of 1 in the handling of value 1 only. - * - * 2) libpng currently uses an intermediate 8-bit linear value in gamma - * correction of 8-bit values. This results in many more errors, the worse of - * which is mapping sRGB(14) to sRGB(0). - * - * The general 'error_via_linear' is more complex because of pre-multiplication, - * this compounds the 8-bit errors according to the alpha value of the pixel. - * As a result 256 values are pre-calculated for error_via_linear. - */ -#if 0 -static int error_in_libpng_gamma; -static int error_via_linear[256]; /* Indexed by 8-bit alpha */ - -static void -init_error_via_linear(void) -{ - int alpha; - - error_via_linear[0] = 255; /* transparent pixel */ - - for (alpha=1; alpha<=255; ++alpha) - { - /* 16-bit values less than 128.5 get rounded to 8-bit 0 and so the worst - * case error arises with 16-bit 128.5, work out what sRGB - * (non-associated) value generates 128.5; any value less than this is - * going to map to 0, so the worst error is floor(value). - * - * Note that errors are considerably higher (more than a factor of 2) - * because libpng uses a simple power law for sRGB data at present. - * - * Add .1 for arithmetic errors inside libpng. - */ - double v = floor(255*pow(.5/*(128.5 * 255 / 65535)*/ / alpha, 1/2.2)+.1); - - error_via_linear[alpha] = (int)v; - } - - /* This is actually 14.99, but, despite the closeness to 15, 14 seems to work - * ok in this case. - */ - error_in_libpng_gamma = 14; -} -#endif - -static void -print_pixel(char string[64], const Pixel *pixel, png_uint_32 format) -{ - switch (format & (PNG_FORMAT_FLAG_ALPHA|PNG_FORMAT_FLAG_COLOR)) - { - case 0: - sprintf(string, "%s(%d)", format_names[format], pixel->g); - break; - - case PNG_FORMAT_FLAG_ALPHA: - sprintf(string, "%s(%d,%d)", format_names[format], pixel->g, - pixel->a); - break; - - case PNG_FORMAT_FLAG_COLOR: - sprintf(string, "%s(%d,%d,%d)", format_names[format], - pixel->r, pixel->g, pixel->b); - break; - - case PNG_FORMAT_FLAG_COLOR|PNG_FORMAT_FLAG_ALPHA: - sprintf(string, "%s(%d,%d,%d,%d)", format_names[format], - pixel->r, pixel->g, pixel->b, pixel->a); - break; - - default: - sprintf(string, "invalid-format"); - break; - } -} - -static int -logpixel(const Transform *transform, png_uint_32 x, png_uint_32 y, - const Pixel *in, const Pixel *calc, const Pixel *out, const char *reason) -{ - png_uint_32 in_format = transform->in_image->image.format; - png_uint_32 out_format = transform->out_image->image.format; - - png_uint_32 back_format = out_format & ~PNG_FORMAT_FLAG_ALPHA; - const char *via_linear = ""; - - char pixel_in[64], pixel_calc[64], pixel_out[64], pixel_loc[64]; - char background_info[100]; - - print_pixel(pixel_in, in, in_format); - print_pixel(pixel_calc, calc, out_format); - print_pixel(pixel_out, out, out_format); - - if (transform->is_palette) - sprintf(pixel_loc, "palette: %lu", (unsigned long)y); - else - sprintf(pixel_loc, "%lu,%lu", (unsigned long)x, (unsigned long)y); - - if (transform->from_linear != NULL) - { - via_linear = " (via linear)"; - /* And as a result the *read* format which did any background processing - * was itself linear, so the background color information is also - * linear. - */ - back_format |= PNG_FORMAT_FLAG_LINEAR; - } - - if (transform->background != NULL) - { - Pixel back; - char pixel_back[64]; - - back.r = transform->background->ir; - back.g = transform->background->ig; - back.b = transform->background->ib; - back.a = -1; /* not used */ - - print_pixel(pixel_back, &back, back_format); - sprintf(background_info, " on background %s", pixel_back); - } - - else - background_info[0] = 0; - - if (transform->in_image->file_name != transform->out_image->file_name) - { - char error_buffer[512]; - sprintf(error_buffer, - "(%s) %s error%s:\n %s%s ->\n %s\n not: %s.\n" - "Use --preserve and examine: ", pixel_loc, reason, via_linear, - pixel_in, background_info, pixel_out, pixel_calc); - return logerror(transform->in_image, transform->in_image->file_name, - error_buffer, transform->out_image->file_name); - } - - else - { - char error_buffer[512]; - sprintf(error_buffer, - "(%s) %s error%s:\n %s%s ->\n %s\n not: %s.\n" - " The error happened when reading the original file with this format.", - pixel_loc, reason, via_linear, pixel_in, background_info, pixel_out, - pixel_calc); - return logerror(transform->in_image, transform->in_image->file_name, - error_buffer, ""); - } -} - -static int -cmppixel(Transform *transform, png_const_voidp in, png_const_voidp out, - png_uint_32 x, png_uint_32 y/*or palette index*/) -{ - int maxerr; - png_const_charp errmsg; - Pixel pixel_in, pixel_calc, pixel_out; - - transform->in_gp(&pixel_in, in); - - if (transform->from_linear == NULL) - transform->transform(&pixel_calc, &pixel_in, transform->background); - - else - { - transform->transform(&pixel_out, &pixel_in, transform->background); - transform->from_linear(&pixel_calc, &pixel_out, NULL); - } - - transform->out_gp(&pixel_out, out); - - /* Eliminate the case where the input and output values match exactly. */ - if (pixel_calc.a == pixel_out.a && pixel_calc.r == pixel_out.r && - pixel_calc.g == pixel_out.g && pixel_calc.b == pixel_out.b) - return 1; - - /* Eliminate the case where the output pixel is transparent and the output - * is 8-bit - any component values are valid. Don't check the input alpha - * here to also skip the 16-bit small alpha cases. - */ - if (transform->output_8bit && pixel_calc.a == 0 && pixel_out.a == 0) - return 1; - - /* Check for alpha errors first; an alpha error can damage the components too - * so avoid spurious checks on components if one is found. - */ - errmsg = NULL; - { - int err_a = abs(pixel_calc.a-pixel_out.a); - - if (err_a > transform->error[3]) - { - /* If accumulating check the components too */ - if (transform->accumulate) - transform->error[3] = (png_uint_16)err_a; - - else - errmsg = "alpha"; - } - } - - /* Now if *either* of the output alphas are 0 but alpha is within tolerance - * eliminate the 8-bit component comparison. - */ - if (errmsg == NULL && transform->output_8bit && - (pixel_calc.a == 0 || pixel_out.a == 0)) - return 1; - - if (errmsg == NULL) /* else just signal an alpha error */ - { - int err_r = abs(pixel_calc.r - pixel_out.r); - int err_g = abs(pixel_calc.g - pixel_out.g); - int err_b = abs(pixel_calc.b - pixel_out.b); - int limit; - - if ((err_r | err_g | err_b) == 0) - return 1; /* exact match */ - - /* Mismatch on a component, check the input alpha */ - if (pixel_in.a >= transform->in_opaque) - { - errmsg = "opaque component"; - limit = 2; /* opaque */ - } - - else if (pixel_in.a > 0) - { - errmsg = "alpha component"; - limit = 1; /* partially transparent */ - } - - else - { - errmsg = "transparent component (background)"; - limit = 0; /* transparent */ - } - - maxerr = err_r; - if (maxerr < err_g) maxerr = err_g; - if (maxerr < err_b) maxerr = err_b; - - if (maxerr <= transform->error[limit]) - return 1; /* within the error limits */ - - /* Handle a component mis-match; log it, just return an error code, or - * accumulate it. - */ - if (transform->accumulate) - { - transform->error[limit] = (png_uint_16)maxerr; - return 1; /* to cause the caller to keep going */ - } - } - - /* Failure to match and not accumulating, so the error must be logged. */ - return logpixel(transform, x, y, &pixel_in, &pixel_calc, &pixel_out, errmsg); -} - -static png_byte -component_loc(png_byte loc[4], png_uint_32 format) -{ - /* Given a format return the number of channels and the location of - * each channel. - * - * The mask 'loc' contains the component offset of the channels in the - * following order. Note that if 'format' is grayscale the entries 1-3 must - * all contain the location of the gray channel. - * - * 0: alpha - * 1: red or gray - * 2: green or gray - * 3: blue or gray - */ - png_byte channels; - - if (format & PNG_FORMAT_FLAG_COLOR) - { - channels = 3; - - loc[2] = 1; - -# ifdef PNG_FORMAT_BGR_SUPPORTED - if (format & PNG_FORMAT_FLAG_BGR) - { - loc[1] = 2; - loc[3] = 0; - } - - else -# endif - { - loc[1] = 0; - loc[3] = 2; - } - } - - else - { - channels = 1; - loc[1] = loc[2] = loc[3] = 0; - } - - if (format & PNG_FORMAT_FLAG_ALPHA) - { -# ifdef PNG_FORMAT_AFIRST_SUPPORTED - if (format & PNG_FORMAT_FLAG_AFIRST) - { - loc[0] = 0; - ++loc[1]; - ++loc[2]; - ++loc[3]; - } - - else -# endif - loc[0] = channels; - - ++channels; - } - - else - loc[0] = 4; /* not present */ - - return channels; -} - -/* Compare two images, the original 'a', which was written out then read back in - * to * give image 'b'. The formats may have been changed. - */ -static int -compare_two_images(Image *a, Image *b, int via_linear, - png_const_colorp background) -{ - ptrdiff_t stridea = a->stride; - ptrdiff_t strideb = b->stride; - png_const_bytep rowa = a->buffer+16; - png_const_bytep rowb = b->buffer+16; - png_uint_32 width = a->image.width; - png_uint_32 height = a->image.height; - png_uint_32 formata = a->image.format; - png_uint_32 formatb = b->image.format; - unsigned int a_sample = PNG_IMAGE_SAMPLE_SIZE(formata); - unsigned int b_sample = PNG_IMAGE_SAMPLE_SIZE(formatb); - int alpha_added, alpha_removed; - int bchannels; - png_uint_32 y; - Transform tr; - int btoa[4]={0,0,0,0}; - - /* This should never happen: */ - if (width != b->image.width || height != b->image.height) - return logerror(a, a->file_name, ": width x height changed: ", - b->file_name); - - /* Set up the background and the transform */ - transform_from_formats(&tr, a, b, background, via_linear); - - /* Find the first row and inter-row space. */ - if (!(formata & PNG_FORMAT_FLAG_COLORMAP) && - (formata & PNG_FORMAT_FLAG_LINEAR)) - stridea *= 2; - - if (!(formatb & PNG_FORMAT_FLAG_COLORMAP) && - (formatb & PNG_FORMAT_FLAG_LINEAR)) - strideb *= 2; - - if (stridea < 0) rowa += (height-1) * (-stridea); - if (strideb < 0) rowb += (height-1) * (-strideb); - - /* First shortcut the two colormap case by comparing the image data; if it - * matches then we expect the colormaps to match, although this is not - * absolutely necessary for an image match. If the colormaps fail to match - * then there is a problem in libpng. - */ - if (formata & formatb & PNG_FORMAT_FLAG_COLORMAP) - { - /* Only check colormap entries that actually exist; */ - png_const_bytep ppa, ppb; - int match; - png_byte in_use[256], amax = 0, bmax = 0; - - memset(in_use, 0, sizeof in_use); - - ppa = rowa; - ppb = rowb; - - /* Do this the slow way to accumulate the 'in_use' flags, don't break out - * of the loop until the end; this validates the color-mapped data to - * ensure all pixels are valid color-map indexes. - */ - for (y=0, match=1; y bmax) - bmax = bval; - - if (bval != aval) - match = 0; - - in_use[aval] = 1; - if (aval > amax) - amax = aval; - } - } - - /* If the buffers match then the colormaps must too. */ - if (match) - { - /* Do the color-maps match, entry by entry? Only check the 'in_use' - * entries. An error here should be logged as a color-map error. - */ - png_const_bytep a_cmap = (png_const_bytep)a->colormap; - png_const_bytep b_cmap = (png_const_bytep)b->colormap; - int result = 1; /* match by default */ - - /* This is used in logpixel to get the error message correct. */ - tr.is_palette = 1; - - for (y=0; y<256; ++y, a_cmap += a_sample, b_cmap += b_sample) - if (in_use[y]) - { - /* The colormap entries should be valid, but because libpng doesn't - * do any checking at present the original image may contain invalid - * pixel values. These cause an error here (at present) unless - * accumulating errors in which case the program just ignores them. - */ - if (y >= a->image.colormap_entries) - { - if ((a->opts & ACCUMULATE) == 0) - { - char pindex[9]; - sprintf(pindex, "%lu[%lu]", (unsigned long)y, - (unsigned long)a->image.colormap_entries); - logerror(a, a->file_name, ": bad pixel index: ", pindex); - } - result = 0; - } - - else if (y >= b->image.colormap_entries) - { - if ((b->opts & ACCUMULATE) == 0) - { - char pindex[9]; - sprintf(pindex, "%lu[%lu]", (unsigned long)y, - (unsigned long)b->image.colormap_entries); - logerror(b, b->file_name, ": bad pixel index: ", pindex); - } - result = 0; - } - - /* All the mismatches are logged here; there can only be 256! */ - else if (!cmppixel(&tr, a_cmap, b_cmap, 0, y)) - result = 0; - } - - /* If requested, copy the error values back from the Transform. */ - if (a->opts & ACCUMULATE) - { - tr.error_ptr[0] = tr.error[0]; - tr.error_ptr[1] = tr.error[1]; - tr.error_ptr[2] = tr.error[2]; - tr.error_ptr[3] = tr.error[3]; - result = 1; /* force a continue */ - } - - return result; - } - - /* else the image buffers don't match pixel-wise so compare sample values - * instead, but first validate that the pixel indexes are in range (but - * only if not accumulating, when the error is ignored.) - */ - else if ((a->opts & ACCUMULATE) == 0) - { -# ifdef __GNUC__ -# define BYTE_CHARS 20 /* 2^32: GCC sprintf warning */ -# else -# define BYTE_CHARS 3 /* 2^8: real maximum value */ -# endif - /* Check the original image first, - * TODO: deal with input images with bad pixel values? - */ - if (amax >= a->image.colormap_entries) - { - char pindex[3+2*BYTE_CHARS]; - sprintf(pindex, "%d[%u]", amax, - (png_byte)/*SAFE*/a->image.colormap_entries); - return logerror(a, a->file_name, ": bad pixel index: ", pindex); - } - - else if (bmax >= b->image.colormap_entries) - { - char pindex[3+2*BYTE_CHARS]; - sprintf(pindex, "%d[%u]", bmax, - (png_byte)/*SAFE*/b->image.colormap_entries); - return logerror(b, b->file_name, ": bad pixel index: ", pindex); - } - } - } - - /* We can directly compare pixel values without the need to use the read - * or transform support (i.e. a memory compare) if: - * - * 1) The bit depth has not changed. - * 2) RGB to grayscale has not been done (the reverse is ok; we just compare - * the three RGB values to the original grayscale.) - * 3) An alpha channel has not been removed from an 8-bit format, or the - * 8-bit alpha value of the pixel was 255 (opaque). - * - * If an alpha channel has been *added* then it must have the relevant opaque - * value (255 or 65535). - * - * The fist two the tests (in the order given above) (using the boolean - * equivalence !a && !b == !(a || b)) - */ - if (!(((formata ^ formatb) & PNG_FORMAT_FLAG_LINEAR) | - (formata & (formatb ^ PNG_FORMAT_FLAG_COLOR) & PNG_FORMAT_FLAG_COLOR))) - { - /* Was an alpha channel changed? */ - png_uint_32 alpha_changed = (formata ^ formatb) & PNG_FORMAT_FLAG_ALPHA; - - /* Was an alpha channel removed? (The third test.) If so the direct - * comparison is only possible if the input alpha is opaque. - */ - alpha_removed = (formata & alpha_changed) != 0; - - /* Was an alpha channel added? */ - alpha_added = (formatb & alpha_changed) != 0; - - /* The channels may have been moved between input and output, this finds - * out how, recording the result in the btoa array, which says where in - * 'a' to find each channel of 'b'. If alpha was added then btoa[alpha] - * ends up as 4 (and is not used.) - */ - { - int i; - png_byte aloc[4]; - png_byte bloc[4]; - - /* The following are used only if the formats match, except that - * 'bchannels' is a flag for matching formats. btoa[x] says, for each - * channel in b, where to find the corresponding value in a, for the - * bchannels. achannels may be different for a gray to rgb transform - * (a will be 1 or 2, b will be 3 or 4 channels.) - */ - (void)component_loc(aloc, formata); - bchannels = component_loc(bloc, formatb); - - /* Hence the btoa array. */ - for (i=0; i<4; ++i) if (bloc[i] < 4) - btoa[bloc[i]] = aloc[i]; /* may be '4' for alpha */ - - if (alpha_added) - alpha_added = bloc[0]; /* location of alpha channel in image b */ - - else - alpha_added = 4; /* Won't match an image b channel */ - - if (alpha_removed) - alpha_removed = aloc[0]; /* location of alpha channel in image a */ - - else - alpha_removed = 4; - } - } - - else - { - /* Direct compare is not possible, cancel out all the corresponding local - * variables. - */ - bchannels = 0; - alpha_removed = alpha_added = 4; - btoa[3] = btoa[2] = btoa[1] = btoa[0] = 4; /* 4 == not present */ - } - - for (y=0; ycolormap + a_sample * *ppa++; - else - psa = ppa, ppa += a_sample; - - if (formatb & PNG_FORMAT_FLAG_COLORMAP) - psb = (png_const_bytep)b->colormap + b_sample * *ppb++; - else - psb = ppb, ppb += b_sample; - - /* Do the fast test if possible. */ - if (bchannels) - { - /* Check each 'b' channel against either the corresponding 'a' - * channel or the opaque alpha value, as appropriate. If - * alpha_removed value is set (not 4) then also do this only if the - * 'a' alpha channel (alpha_removed) is opaque; only relevant for - * the 8-bit case. - */ - if (formatb & PNG_FORMAT_FLAG_LINEAR) /* 16-bit checks */ - { - png_const_uint_16p pua = aligncastconst(png_const_uint_16p, psa); - png_const_uint_16p pub = aligncastconst(png_const_uint_16p, psb); - - switch (bchannels) - { - case 4: - if (pua[btoa[3]] != pub[3]) break; - /* FALLTHROUGH */ - case 3: - if (pua[btoa[2]] != pub[2]) break; - /* FALLTHROUGH */ - case 2: - if (pua[btoa[1]] != pub[1]) break; - /* FALLTHROUGH */ - case 1: - if (pua[btoa[0]] != pub[0]) break; - if (alpha_added != 4 && pub[alpha_added] != 65535) break; - continue; /* x loop */ - default: - break; /* impossible */ - } - } - - else if (alpha_removed == 4 || psa[alpha_removed] == 255) - { - switch (bchannels) - { - case 4: - if (psa[btoa[3]] != psb[3]) break; - /* FALLTHROUGH */ - case 3: - if (psa[btoa[2]] != psb[2]) break; - /* FALLTHROUGH */ - case 2: - if (psa[btoa[1]] != psb[1]) break; - /* FALLTHROUGH */ - case 1: - if (psa[btoa[0]] != psb[0]) break; - if (alpha_added != 4 && psb[alpha_added] != 255) break; - continue; /* x loop */ - default: - break; /* impossible */ - } - } - } - - /* If we get to here the fast match failed; do the slow match for this - * pixel. - */ - if (!cmppixel(&tr, psa, psb, x, y) && (a->opts & KEEP_GOING) == 0) - return 0; /* error case */ - } - } - - /* If requested, copy the error values back from the Transform. */ - if (a->opts & ACCUMULATE) - { - tr.error_ptr[0] = tr.error[0]; - tr.error_ptr[1] = tr.error[1]; - tr.error_ptr[2] = tr.error[2]; - tr.error_ptr[3] = tr.error[3]; - } - - return 1; -} - -/* Read the file; how the read gets done depends on which of input_file and - * input_memory have been set. - */ -static int -read_file(Image *image, png_uint_32 format, png_const_colorp background) -{ - memset(&image->image, 0, sizeof image->image); - image->image.version = PNG_IMAGE_VERSION; - - if (image->input_memory != NULL) - { - if (!png_image_begin_read_from_memory(&image->image, image->input_memory, - image->input_memory_size)) - return logerror(image, "memory init: ", image->file_name, ""); - } - -# ifdef PNG_STDIO_SUPPORTED - else if (image->input_file != NULL) - { - if (!png_image_begin_read_from_stdio(&image->image, image->input_file)) - return logerror(image, "stdio init: ", image->file_name, ""); - } - - else - { - if (!png_image_begin_read_from_file(&image->image, image->file_name)) - return logerror(image, "file init: ", image->file_name, ""); - } -# else - else - { - return logerror(image, "unsupported file/stdio init: ", - image->file_name, ""); - } -# endif - - /* This must be set after the begin_read call: */ - if (image->opts & sRGB_16BIT) - image->image.flags |= PNG_IMAGE_FLAG_16BIT_sRGB; - - /* Have an initialized image with all the data we need plus, maybe, an - * allocated file (myfile) or buffer (mybuffer) that need to be freed. - */ - { - int result; - png_uint_32 image_format; - - /* Print both original and output formats. */ - image_format = image->image.format; - - if (image->opts & VERBOSE) - { - printf("%s %lu x %lu %s -> %s", image->file_name, - (unsigned long)image->image.width, - (unsigned long)image->image.height, - format_names[image_format & FORMAT_MASK], - (format & FORMAT_NO_CHANGE) != 0 || image->image.format == format - ? "no change" : format_names[format & FORMAT_MASK]); - - if (background != NULL) - printf(" background(%d,%d,%d)\n", background->red, - background->green, background->blue); - else - printf("\n"); - - fflush(stdout); - } - - /* 'NO_CHANGE' combined with the color-map flag forces the base format - * flags to be set on read to ensure that the original representation is - * not lost in the pass through a colormap format. - */ - if ((format & FORMAT_NO_CHANGE) != 0) - { - if ((format & PNG_FORMAT_FLAG_COLORMAP) != 0 && - (image_format & PNG_FORMAT_FLAG_COLORMAP) != 0) - format = (image_format & ~BASE_FORMATS) | (format & BASE_FORMATS); - - else - format = image_format; - } - - image->image.format = format; - - image->stride = PNG_IMAGE_ROW_STRIDE(image->image) + image->stride_extra; - allocbuffer(image); - - result = png_image_finish_read(&image->image, background, - image->buffer+16, (png_int_32)image->stride, image->colormap); - - checkbuffer(image, image->file_name); - - if (result) - return checkopaque(image); - - else - return logerror(image, image->file_name, ": image read failed", ""); - } -} - -/* Reads from a filename, which must be in image->file_name, but uses - * image->opts to choose the method. The file is always read in its native - * format (the one the simplified API suggests). - */ -static int -read_one_file(Image *image) -{ - if (!(image->opts & USE_FILE) || (image->opts & USE_STDIO)) - { - /* memory or stdio. */ - FILE *f = fopen(image->file_name, "rb"); - - if (f != NULL) - { - if (image->opts & USE_FILE) - image->input_file = f; - - else /* memory */ - { - if (fseek(f, 0, SEEK_END) == 0) - { - long int cb = ftell(f); - - if (cb > 0) - { -#ifndef __COVERITY__ - if ((unsigned long int)cb <= (size_t)~(size_t)0) -#endif - { - png_bytep b = voidcast(png_bytep, malloc((size_t)cb)); - - if (b != NULL) - { - rewind(f); - - if (fread(b, (size_t)cb, 1, f) == 1) - { - fclose(f); - image->input_memory_size = cb; - image->input_memory = b; - } - - else - { - free(b); - return logclose(image, f, image->file_name, - ": read failed: "); - } - } - - else - return logclose(image, f, image->file_name, - ": out of memory: "); - } - - else - return logclose(image, f, image->file_name, - ": file too big for this architecture: "); - /* cb is the length of the file as a (long) and - * this is greater than the maximum amount of - * memory that can be requested from malloc. - */ - } - - else if (cb == 0) - return logclose(image, f, image->file_name, - ": zero length: "); - - else - return logclose(image, f, image->file_name, - ": tell failed: "); - } - - else - return logclose(image, f, image->file_name, ": seek failed: "); - } - } - - else - return logerror(image, image->file_name, ": open failed: ", - strerror(errno)); - } - - return read_file(image, FORMAT_NO_CHANGE, NULL); -} - -#ifdef PNG_SIMPLIFIED_WRITE_SUPPORTED -static int -write_one_file(Image *output, Image *image, int convert_to_8bit) -{ - if (image->opts & FAST_WRITE) - image->image.flags |= PNG_IMAGE_FLAG_FAST; - - if (image->opts & USE_STDIO) - { -#ifdef PNG_SIMPLIFIED_WRITE_STDIO_SUPPORTED -#ifndef __COVERITY__ - FILE *f = tmpfile(); -#else - /* Experimental. Coverity says tmpfile() is insecure because it - * generates predictable names. - * - * It is possible to satisfy Coverity by using mkstemp(); however, - * any platform supporting mkstemp() undoubtedly has a secure tmpfile() - * implementation as well, and doesn't need the fix. Note that - * the fix won't work on platforms that don't support mkstemp(). - * - * https://www.securecoding.cert.org/confluence/display/c/ - * FIO21-C.+Do+not+create+temporary+files+in+shared+directories - * says that most historic implementations of tmpfile() provide - * only a limited number of possible temporary file names - * (usually 26) before file names are recycled. That article also - * provides a secure solution that unfortunately depends upon mkstemp(). - */ - char tmpfile[] = "pngstest-XXXXXX"; - int filedes; - FILE *f; - umask(0177); - filedes = mkstemp(tmpfile); - if (filedes < 0) - f = NULL; - else - { - f = fdopen(filedes,"w+"); - /* Hide the filename immediately and ensure that the file does - * not exist after the program ends - */ - (void) unlink(tmpfile); - } -#endif - - if (f != NULL) - { - if (png_image_write_to_stdio(&image->image, f, convert_to_8bit, - image->buffer+16, (png_int_32)image->stride, image->colormap)) - { - if (fflush(f) == 0) - { - rewind(f); - initimage(output, image->opts, "tmpfile", image->stride_extra); - output->input_file = f; - if (!checkopaque(image)) - return 0; - } - - else - return logclose(image, f, "tmpfile", ": flush: "); - } - - else - { - fclose(f); - return logerror(image, "tmpfile", ": write failed", ""); - } - } - - else - return logerror(image, "tmpfile", ": open: ", strerror(errno)); -#else /* SIMPLIFIED_WRITE_STDIO */ - return logerror(image, "tmpfile", ": open: unsupported", ""); -#endif /* SIMPLIFIED_WRITE_STDIO */ - } - - else if (image->opts & USE_FILE) - { -#ifdef PNG_SIMPLIFIED_WRITE_STDIO_SUPPORTED - static int counter = 0; - char name[32]; - - sprintf(name, "%s%d.png", tmpf, ++counter); - - if (png_image_write_to_file(&image->image, name, convert_to_8bit, - image->buffer+16, (png_int_32)image->stride, image->colormap)) - { - initimage(output, image->opts, output->tmpfile_name, - image->stride_extra); - /* Afterwards, or freeimage will delete it! */ - strcpy(output->tmpfile_name, name); - - if (!checkopaque(image)) - return 0; - } - - else - return logerror(image, name, ": write failed", ""); -#else /* SIMPLIFIED_WRITE_STDIO */ - return logerror(image, "stdio", ": open: unsupported", ""); -#endif /* SIMPLIFIED_WRITE_STDIO */ - } - - else /* use memory */ - { - png_alloc_size_t size; - - if (png_image_write_get_memory_size(image->image, size, convert_to_8bit, - image->buffer+16, (png_int_32)image->stride, image->colormap)) - { - /* This is non-fatal but ignoring it was causing serious problems in - * the macro to be ignored: - */ - if (size > PNG_IMAGE_PNG_SIZE_MAX(image->image)) - return logerror(image, "memory", ": PNG_IMAGE_SIZE_MAX wrong", ""); - - initimage(output, image->opts, "memory", image->stride_extra); - output->input_memory = malloc(size); - - if (output->input_memory != NULL) - { - output->input_memory_size = size; - - if (png_image_write_to_memory(&image->image, output->input_memory, - &output->input_memory_size, convert_to_8bit, image->buffer+16, - (png_int_32)image->stride, image->colormap)) - { - /* This is also non-fatal but it safes safer to error out anyway: - */ - if (size != output->input_memory_size) - return logerror(image, "memory", ": memory size wrong", ""); - } - - else - return logerror(image, "memory", ": write failed", ""); - } - - else - return logerror(image, "memory", ": out of memory", ""); - } - - else - return logerror(image, "memory", ": get size:", ""); - } - - /* 'output' has an initialized temporary image, read this back in and compare - * this against the original: there should be no change since the original - * format was written unmodified unless 'convert_to_8bit' was specified. - * However, if the original image was color-mapped, a simple read will zap - * the linear, color and maybe alpha flags, this will cause spurious failures - * under some circumstances. - */ - if (read_file(output, image->image.format | FORMAT_NO_CHANGE, NULL)) - { - png_uint_32 original_format = image->image.format; - - if (convert_to_8bit) - original_format &= ~PNG_FORMAT_FLAG_LINEAR; - - if ((output->image.format & BASE_FORMATS) != - (original_format & BASE_FORMATS)) - return logerror(image, image->file_name, ": format changed on read: ", - output->file_name); - - return compare_two_images(image, output, 0/*via linear*/, NULL); - } - - else - return logerror(output, output->tmpfile_name, - ": read of new file failed", ""); -} -#endif - -static int -testimage(Image *image, png_uint_32 opts, format_list *pf) -{ - int result; - Image copy; - - /* Copy the original data, stealing it from 'image' */ - checkopaque(image); - copy = *image; - - copy.opts = opts; - copy.buffer = NULL; - copy.bufsize = 0; - copy.allocsize = 0; - - image->input_file = NULL; - image->input_memory = NULL; - image->input_memory_size = 0; - image->tmpfile_name[0] = 0; - - { - png_uint_32 counter; - Image output; - - newimage(&output); - - result = 1; - - /* Use the low bit of 'counter' to indicate whether or not to do alpha - * removal with a background color or by composting onto the image; this - * step gets skipped if it isn't relevant - */ - for (counter=0; counter<2*FORMAT_COUNT; ++counter) - if (format_isset(pf, counter >> 1)) - { - png_uint_32 format = counter >> 1; - - png_color background_color; - png_colorp background = NULL; - - /* If there is a format change that removes the alpha channel then - * the background is relevant. If the output is 8-bit color-mapped - * then a background color *must* be provided, otherwise there are - * two tests to do - one with a color, the other with NULL. The - * NULL test happens second. - */ - if ((counter & 1) == 0) - { - if ((format & PNG_FORMAT_FLAG_ALPHA) == 0 && - (image->image.format & PNG_FORMAT_FLAG_ALPHA) != 0) - { - /* Alpha/transparency will be removed, the background is - * relevant: make it a color the first time - */ - random_color(&background_color); - background = &background_color; - - /* BUT if the output is to a color-mapped 8-bit format then - * the background must always be a color, so increment 'counter' - * to skip the NULL test. - */ - if ((format & PNG_FORMAT_FLAG_COLORMAP) != 0 && - (format & PNG_FORMAT_FLAG_LINEAR) == 0) - ++counter; - } - - /* Otherwise an alpha channel is not being eliminated, just leave - * background NULL and skip the (counter & 1) NULL test. - */ - else - ++counter; - } - /* else just use NULL for background */ - - resetimage(©); - copy.opts = opts; /* in case read_file needs to change it */ - - result = read_file(©, format, background); - if (!result) - break; - - /* Make sure the file just read matches the original file. */ - result = compare_two_images(image, ©, 0/*via linear*/, background); - if (!result) - break; - -# ifdef PNG_SIMPLIFIED_WRITE_SUPPORTED - /* Write the *copy* just made to a new file to make sure the write - * side works ok. Check the conversion to sRGB if the copy is - * linear. - */ - output.opts = opts; - result = write_one_file(&output, ©, 0/*convert to 8bit*/); - if (!result) - break; - - /* Validate against the original too; the background is needed here - * as well so that compare_two_images knows what color was used. - */ - result = compare_two_images(image, &output, 0, background); - if (!result) - break; - - if ((format & PNG_FORMAT_FLAG_LINEAR) != 0 && - (format & PNG_FORMAT_FLAG_COLORMAP) == 0) - { - /* 'output' is linear, convert to the corresponding sRGB format. - */ - output.opts = opts; - result = write_one_file(&output, ©, 1/*convert to 8bit*/); - if (!result) - break; - - /* This may involve a conversion via linear; in the ideal world - * this would round-trip correctly, but libpng 1.5.7 is not the - * ideal world so allow a drift (error_via_linear). - * - * 'image' has an alpha channel but 'output' does not then there - * will a strip-alpha-channel operation (because 'output' is - * linear), handle this by composing on black when doing the - * comparison. - */ - result = compare_two_images(image, &output, 1/*via_linear*/, - background); - if (!result) - break; - } -# endif /* PNG_SIMPLIFIED_WRITE_SUPPORTED */ - } - - freeimage(&output); - } - - freeimage(©); - - return result; -} - -static int -test_one_file(const char *file_name, format_list *formats, png_uint_32 opts, - int stride_extra, int log_pass) -{ - int result; - Image image; - - if (!(opts & NO_RESEED)) - reseed(); /* ensure that the random numbers don't depend on file order */ - newimage(&image); - initimage(&image, opts, file_name, stride_extra); - result = read_one_file(&image); - if (result) - result = testimage(&image, opts, formats); - freeimage(&image); - - /* Ensure that stderr is flushed into any log file */ - fflush(stderr); - - if (log_pass) - { - if (result) - printf("PASS:"); - - else - printf("FAIL:"); - -# ifndef PNG_SIMPLIFIED_WRITE_SUPPORTED - printf(" (no write)"); -# endif - - print_opts(opts); - printf(" %s\n", file_name); - /* stdout may not be line-buffered if it is piped to a file, so: */ - fflush(stdout); - } - - else if (!result) - exit(1); - - return result; -} - -int -main(int argc, char **argv) -{ - png_uint_32 opts = FAST_WRITE | STRICT; - format_list formats; - const char *touch = NULL; - int log_pass = 0; - int redundant = 0; - int stride_extra = 0; - int retval = 0; - int c; - -#if PNG_LIBPNG_VER >= 10700 - /* This error should not exist in 1.7 or later: */ - opts |= GBG_ERROR; -#endif - - init_sRGB_to_d(); -#if 0 - init_error_via_linear(); -#endif - format_init(&formats); - reseed(); /* initialize random number seeds */ - - for (c=1; c= sizeof tmpf) - { - fflush(stdout); - fprintf(stderr, "%s: %s is too long for a temp file prefix\n", - argv[0], argv[c]); - exit(99); - } - - /* Safe: checked above */ - strncpy(tmpf, argv[c], sizeof (tmpf)-1); - } - - else - { - fflush(stdout); - fprintf(stderr, "%s: %s requires a temporary file prefix\n", - argv[0], arg); - exit(99); - } - } - else if (strcmp(arg, "--touch") == 0) - { - if (c+1 < argc) - touch = argv[++c]; - - else - { - fflush(stdout); - fprintf(stderr, "%s: %s requires a file name argument\n", - argv[0], arg); - exit(99); - } - } - else if (arg[0] == '+') - { - png_uint_32 format = formatof(arg+1); - - if (format > FORMAT_COUNT) - exit(99); - - format_set(&formats, format); - } - else if (arg[0] == '-' && arg[1] != 0 && (arg[1] != '0' || arg[2] != 0)) - { - fflush(stdout); - fprintf(stderr, "%s: unknown option: %s\n", argv[0], arg); - exit(99); - } - else - { - if (format_is_initial(&formats)) - format_default(&formats, redundant); - - if (arg[0] == '-') - { - int term = (arg[1] == '0' ? 0 : '\n'); - unsigned int ich = 0; - - /* Loop reading files, use a static buffer to simplify this and just - * stop if the name gets to long. - */ - static char buffer[4096]; - - do - { - int ch = getchar(); - - /* Don't allow '\0' in file names, and terminate with '\n' or, - * for -0, just '\0' (use -print0 to find to make this work!) - */ - if (ch == EOF || ch == term || ch == 0) - { - buffer[ich] = 0; - - if (ich > 0 && !test_one_file(buffer, &formats, opts, - stride_extra, log_pass)) - retval = 1; - - if (ch == EOF) - break; - - ich = 0; - --ich; /* so that the increment below sets it to 0 again */ - } - - else - buffer[ich] = (char)ch; - } while (++ich < sizeof buffer); - - if (ich) - { - buffer[32] = 0; - buffer[4095] = 0; - fprintf(stderr, "%s...%s: file name too long\n", buffer, - buffer+(4096-32)); - exit(99); - } - } - - else if (!test_one_file(arg, &formats, opts, stride_extra, log_pass)) - retval = 1; - } - } - - if (opts & ACCUMULATE) - { - unsigned int in; - - printf("/* contrib/libtests/pngstest-errors.h\n"); - printf(" *\n"); - printf(" * BUILT USING:" PNG_HEADER_VERSION_STRING); - printf(" *\n"); - printf(" * This code is released under the libpng license.\n"); - printf(" * For conditions of distribution and use, see the disclaimer\n"); - printf(" * and license in png.h\n"); - printf(" *\n"); - printf(" * THIS IS A MACHINE GENERATED FILE: do not edit it directly!\n"); - printf(" * Instead run:\n"); - printf(" *\n"); - printf(" * pngstest --accumulate\n"); - printf(" *\n"); - printf(" * on as many PNG files as possible; at least PNGSuite and\n"); - printf(" * contrib/libtests/testpngs.\n"); - printf(" */\n"); - - printf("static png_uint_16 gpc_error[16/*in*/][16/*out*/][4/*a*/] =\n"); - printf("{\n"); - for (in=0; in<16; ++in) - { - unsigned int out; - printf(" { /* input: %s */\n ", format_names[in]); - for (out=0; out<16; ++out) - { - unsigned int alpha; - printf(" {"); - for (alpha=0; alpha<4; ++alpha) - { - printf(" %d", gpc_error[in][out][alpha]); - if (alpha < 3) putchar(','); - } - printf(" }"); - if (out < 15) - { - putchar(','); - if (out % 4 == 3) printf("\n "); - } - } - printf("\n }"); - - if (in < 15) - putchar(','); - else - putchar('\n'); - } - printf("};\n"); - - printf("static png_uint_16 gpc_error_via_linear[16][4/*out*/][4] =\n"); - printf("{\n"); - for (in=0; in<16; ++in) - { - unsigned int out; - printf(" { /* input: %s */\n ", format_names[in]); - for (out=0; out<4; ++out) - { - unsigned int alpha; - printf(" {"); - for (alpha=0; alpha<4; ++alpha) - { - printf(" %d", gpc_error_via_linear[in][out][alpha]); - if (alpha < 3) putchar(','); - } - printf(" }"); - if (out < 3) - putchar(','); - } - printf("\n }"); - - if (in < 15) - putchar(','); - else - putchar('\n'); - } - printf("};\n"); - - printf("static png_uint_16 gpc_error_to_colormap[8/*i*/][8/*o*/][4] =\n"); - printf("{\n"); - for (in=0; in<8; ++in) - { - unsigned int out; - printf(" { /* input: %s */\n ", format_names[in]); - for (out=0; out<8; ++out) - { - unsigned int alpha; - printf(" {"); - for (alpha=0; alpha<4; ++alpha) - { - printf(" %d", gpc_error_to_colormap[in][out][alpha]); - if (alpha < 3) putchar(','); - } - printf(" }"); - if (out < 7) - { - putchar(','); - if (out % 4 == 3) printf("\n "); - } - } - printf("\n }"); - - if (in < 7) - putchar(','); - else - putchar('\n'); - } - printf("};\n"); - printf("/* END MACHINE GENERATED */\n"); - } - - if (retval == 0 && touch != NULL) - { - FILE *fsuccess = fopen(touch, "wt"); - - if (fsuccess != NULL) - { - int error = 0; - fprintf(fsuccess, "PNG simple API tests succeeded\n"); - fflush(fsuccess); - error = ferror(fsuccess); - - if (fclose(fsuccess) || error) - { - fflush(stdout); - fprintf(stderr, "%s: write failed\n", touch); - exit(99); - } - } - - else - { - fflush(stdout); - fprintf(stderr, "%s: open failed\n", touch); - exit(99); - } - } - - return retval; -} - -#else /* !PNG_SIMPLIFIED_READ_SUPPORTED */ -int main(void) -{ - fprintf(stderr, "pngstest: no read support in libpng, test skipped\n"); - /* So the test is skipped: */ - return SKIP; -} -#endif /* PNG_SIMPLIFIED_READ_SUPPORTED */ diff --git a/contrib/libtests/pngunknown.c b/contrib/libtests/pngunknown.c deleted file mode 100644 index 05bdd833d..000000000 --- a/contrib/libtests/pngunknown.c +++ /dev/null @@ -1,1294 +0,0 @@ - -/* pngunknown.c - test the read side unknown chunk handling - * - * Last changed in libpng 1.6.32 [August 24, 2017] - * Copyright (c) 2015,2017 Glenn Randers-Pehrson - * Written by John Cunningham Bowler - * - * This code is released under the libpng license. - * For conditions of distribution and use, see the disclaimer - * and license in png.h - * - * NOTES: - * This is a C program that is intended to be linked against libpng. It - * allows the libpng unknown handling code to be tested by interpreting - * arguments to save or discard combinations of chunks. The program is - * currently just a minimal validation for the built-in libpng facilities. - */ - -#include -#include -#include -#include - -/* Define the following to use this test against your installed libpng, rather - * than the one being built here: - */ -#ifdef PNG_FREESTANDING_TESTS -# include -#else -# include "../../png.h" -#endif - -/* 1.6.1 added support for the configure test harness, which uses 77 to indicate - * a skipped test, in earlier versions we need to succeed on a skipped test, so: - */ -#if PNG_LIBPNG_VER >= 10601 && defined(HAVE_CONFIG_H) -# define SKIP 77 -#else -# define SKIP 0 -#endif - - -/* Since this program tests the ability to change the unknown chunk handling - * these must be defined: - */ -#if defined(PNG_SET_UNKNOWN_CHUNKS_SUPPORTED) &&\ - defined(PNG_STDIO_SUPPORTED) &&\ - defined(PNG_READ_SUPPORTED) - -/* One of these must be defined to allow us to find out what happened. It is - * still useful to set unknown chunk handling without either of these in order - * to cause *known* chunks to be discarded. This can be a significant - * efficiency gain, but it can't really be tested here. - */ -#if defined(PNG_READ_USER_CHUNKS_SUPPORTED) ||\ - defined(PNG_SAVE_UNKNOWN_CHUNKS_SUPPORTED) - -#if PNG_LIBPNG_VER < 10500 -/* This deliberately lacks the const. */ -typedef png_byte *png_const_bytep; - -/* This is copied from 1.5.1 png.h: */ -#define PNG_INTERLACE_ADAM7_PASSES 7 -#define PNG_PASS_START_ROW(pass) (((1U&~(pass))<<(3-((pass)>>1)))&7) -#define PNG_PASS_START_COL(pass) (((1U& (pass))<<(3-(((pass)+1)>>1)))&7) -#define PNG_PASS_ROW_SHIFT(pass) ((pass)>2?(8-(pass))>>1:3) -#define PNG_PASS_COL_SHIFT(pass) ((pass)>1?(7-(pass))>>1:3) -#define PNG_PASS_ROWS(height, pass) (((height)+(((1<>PNG_PASS_ROW_SHIFT(pass)) -#define PNG_PASS_COLS(width, pass) (((width)+(((1<>PNG_PASS_COL_SHIFT(pass)) -#define PNG_ROW_FROM_PASS_ROW(yIn, pass) \ - (((yIn)<>(((7-(off))-(pass))<<2)) & 0xFU) | \ - ((0x01145AF0U>>(((7-(off))-(pass))<<2)) & 0xF0U)) -#define PNG_ROW_IN_INTERLACE_PASS(y, pass) \ - ((PNG_PASS_MASK(pass,0) >> ((y)&7)) & 1) -#define PNG_COL_IN_INTERLACE_PASS(x, pass) \ - ((PNG_PASS_MASK(pass,1) >> ((x)&7)) & 1) - -/* These are needed too for the default build: */ -#define PNG_WRITE_16BIT_SUPPORTED -#define PNG_READ_16BIT_SUPPORTED - -/* This comes from pnglibconf.h after 1.5: */ -#define PNG_FP_1 100000 -#define PNG_GAMMA_THRESHOLD_FIXED\ - ((png_fixed_point)(PNG_GAMMA_THRESHOLD * PNG_FP_1)) -#endif - -#if PNG_LIBPNG_VER < 10600 - /* 1.6.0 constifies many APIs. The following exists to allow pngvalid to be - * compiled against earlier versions. - */ -# define png_const_structp png_structp -#endif - -#if PNG_LIBPNG_VER < 10700 - /* Copied from libpng 1.7.0 png.h */ -#define PNG_u2(b1, b2) (((unsigned int)(b1) << 8) + (b2)) - -#define PNG_U16(b1, b2) ((png_uint_16)PNG_u2(b1, b2)) -#define PNG_U32(b1, b2, b3, b4)\ - (((png_uint_32)PNG_u2(b1, b2) << 16) + PNG_u2(b3, b4)) - -/* Constants for known chunk types. - */ -#define png_IDAT PNG_U32( 73, 68, 65, 84) -#define png_IEND PNG_U32( 73, 69, 78, 68) -#define png_IHDR PNG_U32( 73, 72, 68, 82) -#define png_PLTE PNG_U32( 80, 76, 84, 69) -#define png_bKGD PNG_U32( 98, 75, 71, 68) -#define png_cHRM PNG_U32( 99, 72, 82, 77) -#define png_eXIf PNG_U32(101, 88, 73, 102) /* registered July 2017 */ -#define png_fRAc PNG_U32(102, 82, 65, 99) /* registered, not defined */ -#define png_gAMA PNG_U32(103, 65, 77, 65) -#define png_gIFg PNG_U32(103, 73, 70, 103) -#define png_gIFt PNG_U32(103, 73, 70, 116) /* deprecated */ -#define png_gIFx PNG_U32(103, 73, 70, 120) -#define png_hIST PNG_U32(104, 73, 83, 84) -#define png_iCCP PNG_U32(105, 67, 67, 80) -#define png_iTXt PNG_U32(105, 84, 88, 116) -#define png_oFFs PNG_U32(111, 70, 70, 115) -#define png_pCAL PNG_U32(112, 67, 65, 76) -#define png_pHYs PNG_U32(112, 72, 89, 115) -#define png_sBIT PNG_U32(115, 66, 73, 84) -#define png_sCAL PNG_U32(115, 67, 65, 76) -#define png_sPLT PNG_U32(115, 80, 76, 84) -#define png_sRGB PNG_U32(115, 82, 71, 66) -#define png_sTER PNG_U32(115, 84, 69, 82) -#define png_tEXt PNG_U32(116, 69, 88, 116) -#define png_tIME PNG_U32(116, 73, 77, 69) -#define png_tRNS PNG_U32(116, 82, 78, 83) -#define png_zTXt PNG_U32(122, 84, 88, 116) - -/* Test on flag values as defined in the spec (section 5.4): */ -#define PNG_CHUNK_ANCILLARY(c) (1 & ((c) >> 29)) -#define PNG_CHUNK_CRITICAL(c) (!PNG_CHUNK_ANCILLARY(c)) -#define PNG_CHUNK_PRIVATE(c) (1 & ((c) >> 21)) -#define PNG_CHUNK_RESERVED(c) (1 & ((c) >> 13)) -#define PNG_CHUNK_SAFE_TO_COPY(c) (1 & ((c) >> 5)) - -#endif /* PNG_LIBPNG_VER < 10700 */ - -#ifdef __cplusplus -# define this not_the_cpp_this -# define new not_the_cpp_new -# define voidcast(type, value) static_cast(value) -#else -# define voidcast(type, value) (value) -#endif /* __cplusplus */ - -/* Unused formal parameter errors are removed using the following macro which is - * expected to have no bad effects on performance. - */ -#ifndef UNUSED -# if defined(__GNUC__) || defined(_MSC_VER) -# define UNUSED(param) (void)param; -# else -# define UNUSED(param) -# endif -#endif - -/* Types of chunks not known to libpng */ -#define png_vpAg PNG_U32(118, 112, 65, 103) - -/* Chunk information */ -#define PNG_INFO_tEXt 0x10000000U -#define PNG_INFO_iTXt 0x20000000U -#define PNG_INFO_zTXt 0x40000000U - -#define PNG_INFO_sTER 0x01000000U -#define PNG_INFO_vpAg 0x02000000U - -#define ABSENT 0 -#define START 1 -#define END 2 - -static struct -{ - char name[5]; - png_uint_32 flag; - png_uint_32 tag; - int unknown; /* Chunk not known to libpng */ - int all; /* Chunk set by the '-1' option */ - int position; /* position in pngtest.png */ - int keep; /* unknown handling setting */ -} chunk_info[] = { - /* Critical chunks */ - { "IDAT", PNG_INFO_IDAT, png_IDAT, 0, 0, START, 0 }, /* must be [0] */ - { "PLTE", PNG_INFO_PLTE, png_PLTE, 0, 0, ABSENT, 0 }, - - /* Non-critical chunks that libpng handles */ - /* This is a mess but it seems to be the only way to do it - there is no way - * to check for a definition outside a #if. - */ - { "bKGD", PNG_INFO_bKGD, png_bKGD, -# ifdef PNG_READ_bKGD_SUPPORTED - 0, -# else - 1, -# endif - 1, START, 0 }, - { "cHRM", PNG_INFO_cHRM, png_cHRM, -# ifdef PNG_READ_cHRM_SUPPORTED - 0, -# else - 1, -# endif - 1, START, 0 }, - { "eXIf", PNG_INFO_eXIf, png_eXIf, -# ifdef PNG_READ_eXIf_SUPPORTED - 0, -# else - 1, -# endif - 1, END, 0 }, - { "gAMA", PNG_INFO_gAMA, png_gAMA, -# ifdef PNG_READ_gAMA_SUPPORTED - 0, -# else - 1, -# endif - 1, START, 0 }, - { "hIST", PNG_INFO_hIST, png_hIST, -# ifdef PNG_READ_hIST_SUPPORTED - 0, -# else - 1, -# endif - 1, ABSENT, 0 }, - { "iCCP", PNG_INFO_iCCP, png_iCCP, -# ifdef PNG_READ_iCCP_SUPPORTED - 0, -# else - 1, -# endif - 1, ABSENT, 0 }, - { "iTXt", PNG_INFO_iTXt, png_iTXt, -# ifdef PNG_READ_iTXt_SUPPORTED - 0, -# else - 1, -# endif - 1, ABSENT, 0 }, - { "oFFs", PNG_INFO_oFFs, png_oFFs, -# ifdef PNG_READ_oFFs_SUPPORTED - 0, -# else - 1, -# endif - 1, START, 0 }, - { "pCAL", PNG_INFO_pCAL, png_pCAL, -# ifdef PNG_READ_pCAL_SUPPORTED - 0, -# else - 1, -# endif - 1, START, 0 }, - { "pHYs", PNG_INFO_pHYs, png_pHYs, -# ifdef PNG_READ_pHYs_SUPPORTED - 0, -# else - 1, -# endif - 1, START, 0 }, - { "sBIT", PNG_INFO_sBIT, png_sBIT, -# ifdef PNG_READ_sBIT_SUPPORTED - 0, -# else - 1, -# endif - 1, START, 0 }, - { "sCAL", PNG_INFO_sCAL, png_sCAL, -# ifdef PNG_READ_sCAL_SUPPORTED - 0, -# else - 1, -# endif - 1, START, 0 }, - { "sPLT", PNG_INFO_sPLT, png_sPLT, -# ifdef PNG_READ_sPLT_SUPPORTED - 0, -# else - 1, -# endif - 1, ABSENT, 0 }, - { "sRGB", PNG_INFO_sRGB, png_sRGB, -# ifdef PNG_READ_sRGB_SUPPORTED - 0, -# else - 1, -# endif - 1, START, 0 }, - { "tEXt", PNG_INFO_tEXt, png_tEXt, -# ifdef PNG_READ_tEXt_SUPPORTED - 0, -# else - 1, -# endif - 1, START, 0 }, - { "tIME", PNG_INFO_tIME, png_tIME, -# ifdef PNG_READ_tIME_SUPPORTED - 0, -# else - 1, -# endif - 1, START, 0 }, - { "tRNS", PNG_INFO_tRNS, png_tRNS, -# ifdef PNG_READ_tRNS_SUPPORTED - 0, -# else - 1, -# endif - 0, ABSENT, 0 }, - { "zTXt", PNG_INFO_zTXt, png_zTXt, -# ifdef PNG_READ_zTXt_SUPPORTED - 0, -# else - 1, -# endif - 1, END, 0 }, - - /* No libpng handling */ - { "sTER", PNG_INFO_sTER, png_sTER, 1, 1, START, 0 }, - { "vpAg", PNG_INFO_vpAg, png_vpAg, 1, 0, START, 0 }, -}; - -#define NINFO ((int)((sizeof chunk_info)/(sizeof chunk_info[0]))) - -static void -clear_keep(void) -{ - int i = NINFO; - while (--i >= 0) - chunk_info[i].keep = 0; -} - -static int -find(const char *name) -{ - int i = NINFO; - while (--i >= 0) - { - if (memcmp(chunk_info[i].name, name, 4) == 0) - break; - } - - return i; -} - -static int -findb(const png_byte *name) -{ - int i = NINFO; - while (--i >= 0) - { - if (memcmp(chunk_info[i].name, name, 4) == 0) - break; - } - - return i; -} - -static int -find_by_flag(png_uint_32 flag) -{ - int i = NINFO; - - while (--i >= 0) if (chunk_info[i].flag == flag) return i; - - fprintf(stderr, "pngunknown: internal error\n"); - exit(4); -} - -static int -ancillary(const char *name) -{ - return PNG_CHUNK_ANCILLARY(PNG_U32(name[0], name[1], name[2], name[3])); -} - -#ifdef PNG_SAVE_UNKNOWN_CHUNKS_SUPPORTED -static int -ancillaryb(const png_byte *name) -{ - return PNG_CHUNK_ANCILLARY(PNG_U32(name[0], name[1], name[2], name[3])); -} -#endif - -/* Type of an error_ptr */ -typedef struct -{ - jmp_buf error_return; - png_structp png_ptr; - png_infop info_ptr, end_ptr; - png_uint_32 before_IDAT; - png_uint_32 after_IDAT; - int error_count; - int warning_count; - int keep; /* the default value */ - const char *program; - const char *file; - const char *test; -} display; - -static const char init[] = "initialization"; -static const char cmd[] = "command line"; - -static void -init_display(display *d, const char *program) -{ - memset(d, 0, sizeof *d); - d->png_ptr = NULL; - d->info_ptr = d->end_ptr = NULL; - d->error_count = d->warning_count = 0; - d->program = program; - d->file = program; - d->test = init; -} - -static void -clean_display(display *d) -{ - png_destroy_read_struct(&d->png_ptr, &d->info_ptr, &d->end_ptr); - - /* This must not happen - it might cause an app crash */ - if (d->png_ptr != NULL || d->info_ptr != NULL || d->end_ptr != NULL) - { - fprintf(stderr, "%s(%s): png_destroy_read_struct error\n", d->file, - d->test); - exit(1); - } -} - -PNG_FUNCTION(void, display_exit, (display *d), static PNG_NORETURN) -{ - ++(d->error_count); - - if (d->png_ptr != NULL) - clean_display(d); - - /* During initialization and if this is a single command line argument set - * exit now - there is only one test, otherwise longjmp to do the next test. - */ - if (d->test == init || d->test == cmd) - exit(1); - - longjmp(d->error_return, 1); -} - -static int -display_rc(const display *d, int strict) -{ - return d->error_count + (strict ? d->warning_count : 0); -} - -/* libpng error and warning callbacks */ -PNG_FUNCTION(void, (PNGCBAPI error), (png_structp png_ptr, const char *message), - static PNG_NORETURN) -{ - display *d = (display*)png_get_error_ptr(png_ptr); - - fprintf(stderr, "%s(%s): libpng error: %s\n", d->file, d->test, message); - display_exit(d); -} - -static void PNGCBAPI -warning(png_structp png_ptr, const char *message) -{ - display *d = (display*)png_get_error_ptr(png_ptr); - - fprintf(stderr, "%s(%s): libpng warning: %s\n", d->file, d->test, message); - ++(d->warning_count); -} - -static png_uint_32 -get_valid(display *d, png_infop info_ptr) -{ - png_uint_32 flags = png_get_valid(d->png_ptr, info_ptr, (png_uint_32)~0); - - /* Map the text chunks back into the flags */ - { - png_textp text; - png_uint_32 ntext = png_get_text(d->png_ptr, info_ptr, &text, NULL); - - while (ntext > 0) switch (text[--ntext].compression) - { - case -1: - flags |= PNG_INFO_tEXt; - break; - case 0: - flags |= PNG_INFO_zTXt; - break; - case 1: - case 2: - flags |= PNG_INFO_iTXt; - break; - default: - fprintf(stderr, "%s(%s): unknown text compression %d\n", d->file, - d->test, text[ntext].compression); - display_exit(d); - } - } - - return flags; -} - -#ifdef PNG_READ_USER_CHUNKS_SUPPORTED -static int PNGCBAPI -read_callback(png_structp pp, png_unknown_chunkp pc) -{ - /* This function mimics the behavior of png_set_keep_unknown_chunks by - * returning '0' to keep the chunk and '1' to discard it. - */ - display *d = voidcast(display*, png_get_user_chunk_ptr(pp)); - int chunk = findb(pc->name); - int keep, discard; - - if (chunk < 0) /* not one in our list, so not a known chunk */ - keep = d->keep; - - else - { - keep = chunk_info[chunk].keep; - if (keep == PNG_HANDLE_CHUNK_AS_DEFAULT) - { - /* See the comments in png.h - use the default for unknown chunks, - * do not keep known chunks. - */ - if (chunk_info[chunk].unknown) - keep = d->keep; - - else - keep = PNG_HANDLE_CHUNK_NEVER; - } - } - - switch (keep) - { - default: - fprintf(stderr, "%s(%s): %d: unrecognized chunk option\n", d->file, - d->test, chunk_info[chunk].keep); - display_exit(d); - - case PNG_HANDLE_CHUNK_AS_DEFAULT: - case PNG_HANDLE_CHUNK_NEVER: - discard = 1/*handled; discard*/; - break; - - case PNG_HANDLE_CHUNK_IF_SAFE: - case PNG_HANDLE_CHUNK_ALWAYS: - discard = 0/*not handled; keep*/; - break; - } - - /* Also store information about this chunk in the display, the relevant flag - * is set if the chunk is to be kept ('not handled'.) - */ - if (chunk >= 0) if (!discard) /* stupidity to stop a GCC warning */ - { - png_uint_32 flag = chunk_info[chunk].flag; - - if (pc->location & PNG_AFTER_IDAT) - d->after_IDAT |= flag; - - else - d->before_IDAT |= flag; - } - - /* However if there is no support to store unknown chunks don't ask libpng to - * do it; there will be an png_error. - */ -# ifdef PNG_SAVE_UNKNOWN_CHUNKS_SUPPORTED - return discard; -# else - return 1; /*handled; discard*/ -# endif -} -#endif /* READ_USER_CHUNKS_SUPPORTED */ - -#ifdef PNG_SAVE_UNKNOWN_CHUNKS_SUPPORTED -static png_uint_32 -get_unknown(display *d, png_infop info_ptr, int after_IDAT) -{ - /* Create corresponding 'unknown' flags */ - png_uint_32 flags = 0; - - UNUSED(after_IDAT) - - { - png_unknown_chunkp unknown; - int num_unknown = png_get_unknown_chunks(d->png_ptr, info_ptr, &unknown); - - while (--num_unknown >= 0) - { - int chunk = findb(unknown[num_unknown].name); - - /* Chunks not known to pngunknown must be validated here; since they - * must also be unknown to libpng the 'display->keep' behavior should - * have been used. - */ - if (chunk < 0) switch (d->keep) - { - default: /* impossible */ - case PNG_HANDLE_CHUNK_AS_DEFAULT: - case PNG_HANDLE_CHUNK_NEVER: - fprintf(stderr, "%s(%s): %s: %s: unknown chunk saved\n", - d->file, d->test, d->keep ? "discard" : "default", - unknown[num_unknown].name); - ++(d->error_count); - break; - - case PNG_HANDLE_CHUNK_IF_SAFE: - if (!ancillaryb(unknown[num_unknown].name)) - { - fprintf(stderr, - "%s(%s): if-safe: %s: unknown critical chunk saved\n", - d->file, d->test, unknown[num_unknown].name); - ++(d->error_count); - break; - } - /* FALLTHROUGH */ /* (safe) */ - case PNG_HANDLE_CHUNK_ALWAYS: - break; - } - - else - flags |= chunk_info[chunk].flag; - } - } - - return flags; -} -#else /* SAVE_UNKNOWN_CHUNKS */ -static png_uint_32 -get_unknown(display *d, png_infop info_ptr, int after_IDAT) - /* Otherwise this will return the cached values set by any user callback */ -{ - UNUSED(info_ptr); - - if (after_IDAT) - return d->after_IDAT; - - else - return d->before_IDAT; -} - -# ifndef PNG_READ_USER_CHUNKS_SUPPORTED - /* The #defines above should mean this is never reached, it's just here as - * a check to ensure the logic is correct. - */ -# error No store support and no user chunk support, this will not work -# endif /* READ_USER_CHUNKS */ -#endif /* SAVE_UNKNOWN_CHUNKS */ - -static int -check(FILE *fp, int argc, const char **argv, png_uint_32p flags/*out*/, - display *d, int set_callback) -{ - int i, npasses, ipass; - png_uint_32 height; - - d->keep = PNG_HANDLE_CHUNK_AS_DEFAULT; - d->before_IDAT = 0; - d->after_IDAT = 0; - - /* Some of these errors are permanently fatal and cause an exit here, others - * are per-test and cause an error return. - */ - d->png_ptr = png_create_read_struct(PNG_LIBPNG_VER_STRING, d, error, - warning); - if (d->png_ptr == NULL) - { - fprintf(stderr, "%s(%s): could not allocate png struct\n", d->file, - d->test); - /* Terminate here, this error is not test specific. */ - exit(1); - } - - d->info_ptr = png_create_info_struct(d->png_ptr); - d->end_ptr = png_create_info_struct(d->png_ptr); - if (d->info_ptr == NULL || d->end_ptr == NULL) - { - fprintf(stderr, "%s(%s): could not allocate png info\n", d->file, - d->test); - clean_display(d); - exit(1); - } - - png_init_io(d->png_ptr, fp); - -# ifdef PNG_READ_USER_CHUNKS_SUPPORTED - /* This is only done if requested by the caller; it interferes with the - * standard store/save mechanism. - */ - if (set_callback) - png_set_read_user_chunk_fn(d->png_ptr, d, read_callback); -# else - UNUSED(set_callback) -# endif - - /* Handle each argument in turn; multiple settings are possible for the same - * chunk and multiple calls will occur (the last one should override all - * preceding ones). - */ - for (i=0; i= 10700 &&\ - !defined(PNG_SAVE_UNKNOWN_CHUNKS_SUPPORTED) - if (option < PNG_HANDLE_CHUNK_IF_SAFE) -# endif /* 1.7+ SAVE_UNKNOWN_CHUNKS */ - { - png_byte name[5]; - - memcpy(name, chunk_info[chunk].name, 5); - png_set_keep_unknown_chunks(d->png_ptr, option, name, 1); - chunk_info[chunk].keep = option; - } - continue; - } - - break; - - case 7: /* default */ - if (memcmp(argv[i], "default", 7) == 0) - { -# if PNG_LIBPNG_VER >= 10700 &&\ - !defined(PNG_SAVE_UNKNOWN_CHUNKS_SUPPORTED) - if (option < PNG_HANDLE_CHUNK_IF_SAFE) -# endif /* 1.7+ SAVE_UNKNOWN_CHUNKS */ - png_set_keep_unknown_chunks(d->png_ptr, option, NULL, 0); - - d->keep = option; - continue; - } - - break; - - case 3: /* all */ - if (memcmp(argv[i], "all", 3) == 0) - { -# if PNG_LIBPNG_VER >= 10700 &&\ - !defined(PNG_SAVE_UNKNOWN_CHUNKS_SUPPORTED) - if (option < PNG_HANDLE_CHUNK_IF_SAFE) -# endif /* 1.7+ SAVE_UNKNOWN_CHUNKS */ - png_set_keep_unknown_chunks(d->png_ptr, option, NULL, -1); - - d->keep = option; - - for (chunk = 0; chunk < NINFO; ++chunk) - if (chunk_info[chunk].all) - chunk_info[chunk].keep = option; - continue; - } - - break; - - default: /* some misplaced = */ - - break; - } - } - - fprintf(stderr, "%s(%s): %s: unrecognized chunk argument\n", d->file, - d->test, argv[i]); - display_exit(d); - } - - png_read_info(d->png_ptr, d->info_ptr); - - switch (png_get_interlace_type(d->png_ptr, d->info_ptr)) - { - case PNG_INTERLACE_NONE: - npasses = 1; - break; - - case PNG_INTERLACE_ADAM7: - npasses = PNG_INTERLACE_ADAM7_PASSES; - break; - - default: - /* Hard error because it is not test specific */ - fprintf(stderr, "%s(%s): invalid interlace type\n", d->file, d->test); - clean_display(d); - exit(1); - } - - /* Skip the image data, if IDAT is not being handled then don't do this - * because it will cause a CRC error. - */ - if (chunk_info[0/*IDAT*/].keep == PNG_HANDLE_CHUNK_AS_DEFAULT) - { - png_start_read_image(d->png_ptr); - height = png_get_image_height(d->png_ptr, d->info_ptr); - - if (npasses > 1) - { - png_uint_32 width = png_get_image_width(d->png_ptr, d->info_ptr); - - for (ipass=0; ipass 0) - { - png_uint_32 y; - - for (y=0; ypng_ptr, NULL, NULL); - } - } - } /* interlaced */ - - else /* not interlaced */ - { - png_uint_32 y; - - for (y=0; ypng_ptr, NULL, NULL); - } - } - - png_read_end(d->png_ptr, d->end_ptr); - - flags[0] = get_valid(d, d->info_ptr); - flags[1] = get_unknown(d, d->info_ptr, 0/*before IDAT*/); - - /* Only png_read_png sets PNG_INFO_IDAT! */ - flags[chunk_info[0/*IDAT*/].keep != PNG_HANDLE_CHUNK_AS_DEFAULT] |= - PNG_INFO_IDAT; - - flags[2] = get_valid(d, d->end_ptr); - flags[3] = get_unknown(d, d->end_ptr, 1/*after IDAT*/); - - clean_display(d); - - return d->keep; -} - -static void -check_error(display *d, png_uint_32 flags, const char *message) -{ - while (flags) - { - png_uint_32 flag = flags & -(png_int_32)flags; - int i = find_by_flag(flag); - - fprintf(stderr, "%s(%s): chunk %s: %s\n", d->file, d->test, - chunk_info[i].name, message); - ++(d->error_count); - - flags &= ~flag; - } -} - -static void -check_handling(display *d, int def, png_uint_32 chunks, png_uint_32 known, - png_uint_32 unknown, const char *position, int set_callback) -{ - while (chunks) - { - png_uint_32 flag = chunks & -(png_int_32)chunks; - int i = find_by_flag(flag); - int keep = chunk_info[i].keep; - const char *type; - const char *errorx = NULL; - - if (chunk_info[i].unknown) - { - if (keep == PNG_HANDLE_CHUNK_AS_DEFAULT) - { - type = "UNKNOWN (default)"; - keep = def; - } - - else - type = "UNKNOWN (specified)"; - - if (flag & known) - errorx = "chunk processed"; - - else switch (keep) - { - case PNG_HANDLE_CHUNK_AS_DEFAULT: - if (flag & unknown) - errorx = "DEFAULT: unknown chunk saved"; - break; - - case PNG_HANDLE_CHUNK_NEVER: - if (flag & unknown) - errorx = "DISCARD: unknown chunk saved"; - break; - - case PNG_HANDLE_CHUNK_IF_SAFE: - if (ancillary(chunk_info[i].name)) - { - if (!(flag & unknown)) - errorx = "IF-SAFE: unknown ancillary chunk lost"; - } - - else if (flag & unknown) - errorx = "IF-SAFE: unknown critical chunk saved"; - break; - - case PNG_HANDLE_CHUNK_ALWAYS: - if (!(flag & unknown)) - errorx = "SAVE: unknown chunk lost"; - break; - - default: - errorx = "internal error: bad keep"; - break; - } - } /* unknown chunk */ - - else /* known chunk */ - { - type = "KNOWN"; - - if (flag & known) - { - /* chunk was processed, it won't have been saved because that is - * caught below when checking for inconsistent processing. - */ - if (keep != PNG_HANDLE_CHUNK_AS_DEFAULT) - errorx = "!DEFAULT: known chunk processed"; - } - - else /* not processed */ switch (keep) - { - case PNG_HANDLE_CHUNK_AS_DEFAULT: - errorx = "DEFAULT: known chunk not processed"; - break; - - case PNG_HANDLE_CHUNK_NEVER: - if (flag & unknown) - errorx = "DISCARD: known chunk saved"; - break; - - case PNG_HANDLE_CHUNK_IF_SAFE: - if (ancillary(chunk_info[i].name)) - { - if (!(flag & unknown)) - errorx = "IF-SAFE: known ancillary chunk lost"; - } - - else if (flag & unknown) - errorx = "IF-SAFE: known critical chunk saved"; - break; - - case PNG_HANDLE_CHUNK_ALWAYS: - if (!(flag & unknown)) - errorx = "SAVE: known chunk lost"; - break; - - default: - errorx = "internal error: bad keep (2)"; - break; - } - } - - if (errorx != NULL) - { - ++(d->error_count); - fprintf(stderr, "%s(%s%s): %s %s %s: %s\n", d->file, d->test, - set_callback ? ",callback" : "", - type, chunk_info[i].name, position, errorx); - } - - chunks &= ~flag; - } -} - -static void -perform_one_test(FILE *fp, int argc, const char **argv, - png_uint_32 *default_flags, display *d, int set_callback) -{ - int def; - png_uint_32 flags[2][4]; - - rewind(fp); - clear_keep(); - memcpy(flags[0], default_flags, sizeof flags[0]); - - def = check(fp, argc, argv, flags[1], d, set_callback); - - /* If IDAT is being handled as unknown the image read is skipped and all the - * IDATs after the first end up in the end info struct, so in this case add - * IDAT to the list of unknowns. (Do this after 'check' above sets the - * chunk_info 'keep' fields.) - * - * Note that the flag setting has to be in the 'known' field to avoid - * triggering the consistency check below and the flag must only be set if - * there are multiple IDATs, so if the check above did find an unknown IDAT - * after IDAT. - */ - if (chunk_info[0/*IDAT*/].keep != PNG_HANDLE_CHUNK_AS_DEFAULT && - (flags[1][3] & PNG_INFO_IDAT) != 0) - flags[0][2] |= PNG_INFO_IDAT; - - /* Chunks should either be known or unknown, never both and this should apply - * whether the chunk is before or after the IDAT (actually, the app can - * probably change this by swapping the handling after the image, but this - * test does not do that.) - */ - check_error(d, (flags[0][0]|flags[0][2]) & (flags[0][1]|flags[0][3]), - "chunk handled inconsistently in count tests"); - check_error(d, (flags[1][0]|flags[1][2]) & (flags[1][1]|flags[1][3]), - "chunk handled inconsistently in option tests"); - - /* Now find out what happened to each chunk before and after the IDAT and - * determine if the behavior was correct. First some basic sanity checks, - * any known chunk should be known in the original count, any unknown chunk - * should be either known or unknown in the original. - */ - { - png_uint_32 test; - - test = flags[1][0] & ~flags[0][0]; - check_error(d, test, "new known chunk before IDAT"); - test = flags[1][1] & ~(flags[0][0] | flags[0][1]); - check_error(d, test, "new unknown chunk before IDAT"); - test = flags[1][2] & ~flags[0][2]; - check_error(d, test, "new known chunk after IDAT"); - test = flags[1][3] & ~(flags[0][2] | flags[0][3]); - check_error(d, test, "new unknown chunk after IDAT"); - } - - /* Now each chunk in the original list should have been handled according to - * the options set for that chunk, regardless of whether libpng knows about - * it or not. - */ - check_handling(d, def, flags[0][0] | flags[0][1], flags[1][0], flags[1][1], - "before IDAT", set_callback); - check_handling(d, def, flags[0][2] | flags[0][3], flags[1][2], flags[1][3], - "after IDAT", set_callback); -} - -static void -perform_one_test_safe(FILE *fp, int argc, const char **argv, - png_uint_32 *default_flags, display *d, const char *test) -{ - if (setjmp(d->error_return) == 0) - { - d->test = test; /* allow use of d->error_return */ -# ifdef PNG_SAVE_UNKNOWN_CHUNKS_SUPPORTED - perform_one_test(fp, argc, argv, default_flags, d, 0); -# endif -# ifdef PNG_READ_USER_CHUNKS_SUPPORTED - perform_one_test(fp, argc, argv, default_flags, d, 1); -# endif - d->test = init; /* prevent use of d->error_return */ - } -} - -static const char *standard_tests[] = -{ - "discard", "default=discard", 0, - "save", "default=save", 0, - "if-safe", "default=if-safe", 0, - "vpAg", "vpAg=if-safe", 0, - "sTER", "sTER=if-safe", 0, - "IDAT", "default=discard", "IDAT=save", 0, - "sAPI", "bKGD=save", "cHRM=save", "gAMA=save", "all=discard", "iCCP=save", - "sBIT=save", "sRGB=save", "eXIf=save", 0, - 0/*end*/ -}; - -static PNG_NORETURN void -usage(const char *program, const char *reason) -{ - fprintf(stderr, "pngunknown: %s: usage:\n %s [--strict] " - "--default|{(CHNK|default|all)=(default|discard|if-safe|save)} " - "testfile.png\n", reason, program); - exit(99); -} - -int -main(int argc, const char **argv) -{ - FILE *fp; - png_uint_32 default_flags[4/*valid,unknown{before,after}*/]; - int strict = 0, default_tests = 0; - const char *count_argv = "default=save"; - const char *touch_file = NULL; - display d; - - init_display(&d, argv[0]); - - while (++argv, --argc > 0) - { - if (strcmp(*argv, "--strict") == 0) - strict = 1; - - else if (strcmp(*argv, "--default") == 0) - default_tests = 1; - - else if (strcmp(*argv, "--touch") == 0) - { - if (argc > 1) - touch_file = *++argv, --argc; - - else - usage(d.program, "--touch: missing file name"); - } - - else - break; - } - - /* A file name is required, but there should be no other arguments if - * --default was specified. - */ - if (argc <= 0) - usage(d.program, "missing test file"); - - /* GCC BUG: if (default_tests && argc != 1) triggers some weird GCC argc - * optimization which causes warnings with -Wstrict-overflow! - */ - else if (default_tests) if (argc != 1) - usage(d.program, "extra arguments"); - - /* The name of the test file is the last argument; remove it. */ - d.file = argv[--argc]; - - fp = fopen(d.file, "rb"); - if (fp == NULL) - { - perror(d.file); - exit(99); - } - - /* First find all the chunks, known and unknown, in the test file, a failure - * here aborts the whole test. - * - * If 'save' is supported then the normal saving method should happen, - * otherwise if 'read' is supported then the read callback will do the - * same thing. If both are supported the 'read' callback won't be - * instantiated by default. If 'save' is *not* supported then a user - * callback is required even though we can call png_get_unknown_chunks. - */ - if (check(fp, 1, &count_argv, default_flags, &d, -# ifdef PNG_SAVE_UNKNOWN_CHUNKS_SUPPORTED - 0 -# else - 1 -# endif - ) != PNG_HANDLE_CHUNK_ALWAYS) - { - fprintf(stderr, "%s: %s: internal error\n", d.program, d.file); - exit(99); - } - - /* Now find what the various supplied options cause to change: */ - if (!default_tests) - { - d.test = cmd; /* acts as a flag to say exit, do not longjmp */ -# ifdef PNG_SAVE_UNKNOWN_CHUNKS_SUPPORTED - perform_one_test(fp, argc, argv, default_flags, &d, 0); -# endif -# ifdef PNG_READ_USER_CHUNKS_SUPPORTED - perform_one_test(fp, argc, argv, default_flags, &d, 1); -# endif - d.test = init; - } - - else - { - const char **test = standard_tests; - - /* Set the exit_test pointer here so we can continue after a libpng error. - * NOTE: this leaks memory because the png_struct data from the failing - * test is never freed. - */ - while (*test) - { - const char *this_test = *test++; - const char **next = test; - int count = display_rc(&d, strict), new_count; - const char *result; - int arg_count = 0; - - while (*next) ++next, ++arg_count; - - perform_one_test_safe(fp, arg_count, test, default_flags, &d, - this_test); - - new_count = display_rc(&d, strict); - - if (new_count == count) - result = "PASS"; - - else - result = "FAIL"; - - printf("%s: %s %s\n", result, d.program, this_test); - - test = next+1; - } - } - - fclose(fp); - - if (display_rc(&d, strict) == 0) - { - /* Success, touch the success file if appropriate */ - if (touch_file != NULL) - { - FILE *fsuccess = fopen(touch_file, "wt"); - - if (fsuccess != NULL) - { - int err = 0; - fprintf(fsuccess, "PNG unknown tests succeeded\n"); - fflush(fsuccess); - err = ferror(fsuccess); - - if (fclose(fsuccess) || err) - { - fprintf(stderr, "%s: write failed\n", touch_file); - exit(99); - } - } - - else - { - fprintf(stderr, "%s: open failed\n", touch_file); - exit(99); - } - } - - return 0; - } - - return 1; -} - -#else /* !(READ_USER_CHUNKS || SAVE_UNKNOWN_CHUNKS) */ -int -main(void) -{ - fprintf(stderr, - " test ignored: no support to find out about unknown chunks\n"); - /* So the test is skipped: */ - return SKIP; -} -#endif /* READ_USER_CHUNKS || SAVE_UNKNOWN_CHUNKS */ - -#else /* !(SET_UNKNOWN_CHUNKS && READ) */ -int -main(void) -{ - fprintf(stderr, - " test ignored: no support to modify unknown chunk handling\n"); - /* So the test is skipped: */ - return SKIP; -} -#endif /* SET_UNKNOWN_CHUNKS && READ*/ diff --git a/contrib/libtests/pngvalid.c b/contrib/libtests/pngvalid.c deleted file mode 100644 index 9a2da6a02..000000000 --- a/contrib/libtests/pngvalid.c +++ /dev/null @@ -1,12231 +0,0 @@ - -/* pngvalid.c - validate libpng by constructing then reading png files. - * - * Last changed in libpng 1.6.31 [July 27, 2017] - * Copyright (c) 2014-2017 John Cunningham Bowler - * - * This code is released under the libpng license. - * For conditions of distribution and use, see the disclaimer - * and license in png.h - * - * NOTES: - * This is a C program that is intended to be linked against libpng. It - * generates bitmaps internally, stores them as PNG files (using the - * sequential write code) then reads them back (using the sequential - * read code) and validates that the result has the correct data. - * - * The program can be modified and extended to test the correctness of - * transformations performed by libpng. - */ - -#define _POSIX_SOURCE 1 -#define _ISOC99_SOURCE 1 /* For floating point */ -#define _GNU_SOURCE 1 /* For the floating point exception extension */ -#define _BSD_SOURCE 1 /* For the floating point exception extension */ -#define _DEFAULT_SOURCE 1 /* For the floating point exception extension */ - -#include -#include - -#if defined(HAVE_CONFIG_H) && !defined(PNG_NO_CONFIG_H) -# include -#endif - -#ifdef HAVE_FEENABLEEXCEPT /* from config.h, if included */ -# include -#endif - -#ifndef FE_DIVBYZERO -# define FE_DIVBYZERO 0 -#endif -#ifndef FE_INVALID -# define FE_INVALID 0 -#endif -#ifndef FE_OVERFLOW -# define FE_OVERFLOW 0 -#endif - -/* Define the following to use this test against your installed libpng, rather - * than the one being built here: - */ -#ifdef PNG_FREESTANDING_TESTS -# include -#else -# include "../../png.h" -#endif - -#ifdef PNG_ZLIB_HEADER -# include PNG_ZLIB_HEADER -#else -# include /* For crc32 */ -#endif - -/* 1.6.1 added support for the configure test harness, which uses 77 to indicate - * a skipped test, in earlier versions we need to succeed on a skipped test, so: - */ -#if PNG_LIBPNG_VER >= 10601 && defined(HAVE_CONFIG_H) -# define SKIP 77 -#else -# define SKIP 0 -#endif - -/* pngvalid requires write support and one of the fixed or floating point APIs. - */ -#if defined(PNG_WRITE_SUPPORTED) &&\ - (defined(PNG_FIXED_POINT_SUPPORTED) || defined(PNG_FLOATING_POINT_SUPPORTED)) - -#if PNG_LIBPNG_VER < 10500 -/* This deliberately lacks the const. */ -typedef png_byte *png_const_bytep; - -/* This is copied from 1.5.1 png.h: */ -#define PNG_INTERLACE_ADAM7_PASSES 7 -#define PNG_PASS_START_ROW(pass) (((1U&~(pass))<<(3-((pass)>>1)))&7) -#define PNG_PASS_START_COL(pass) (((1U& (pass))<<(3-(((pass)+1)>>1)))&7) -#define PNG_PASS_ROW_SHIFT(pass) ((pass)>2?(8-(pass))>>1:3) -#define PNG_PASS_COL_SHIFT(pass) ((pass)>1?(7-(pass))>>1:3) -#define PNG_PASS_ROWS(height, pass) (((height)+(((1<>PNG_PASS_ROW_SHIFT(pass)) -#define PNG_PASS_COLS(width, pass) (((width)+(((1<>PNG_PASS_COL_SHIFT(pass)) -#define PNG_ROW_FROM_PASS_ROW(yIn, pass) \ - (((yIn)<>(((7-(off))-(pass))<<2)) & 0xFU) | \ - ((0x01145AF0U>>(((7-(off))-(pass))<<2)) & 0xF0U)) -#define PNG_ROW_IN_INTERLACE_PASS(y, pass) \ - ((PNG_PASS_MASK(pass,0) >> ((y)&7)) & 1) -#define PNG_COL_IN_INTERLACE_PASS(x, pass) \ - ((PNG_PASS_MASK(pass,1) >> ((x)&7)) & 1) - -/* These are needed too for the default build: */ -#define PNG_WRITE_16BIT_SUPPORTED -#define PNG_READ_16BIT_SUPPORTED - -/* This comes from pnglibconf.h after 1.5: */ -#define PNG_FP_1 100000 -#define PNG_GAMMA_THRESHOLD_FIXED\ - ((png_fixed_point)(PNG_GAMMA_THRESHOLD * PNG_FP_1)) -#endif - -#if PNG_LIBPNG_VER < 10600 - /* 1.6.0 constifies many APIs, the following exists to allow pngvalid to be - * compiled against earlier versions. - */ -# define png_const_structp png_structp -#endif - -#ifndef RELEASE_BUILD - /* RELEASE_BUILD is true for releases and release candidates: */ -# define RELEASE_BUILD (PNG_LIBPNG_BUILD_BASE_TYPE >= PNG_LIBPNG_BUILD_RC) -#endif -#if RELEASE_BUILD -# define debugonly(something) -#else /* !RELEASE_BUILD */ -# define debugonly(something) something -#endif /* !RELEASE_BUILD */ - -#include /* For floating point constants */ -#include /* For malloc */ -#include /* For memcpy, memset */ -#include /* For floor */ - -/* Convenience macros. */ -#define CHUNK(a,b,c,d) (((a)<<24)+((b)<<16)+((c)<<8)+(d)) -#define CHUNK_IHDR CHUNK(73,72,68,82) -#define CHUNK_PLTE CHUNK(80,76,84,69) -#define CHUNK_IDAT CHUNK(73,68,65,84) -#define CHUNK_IEND CHUNK(73,69,78,68) -#define CHUNK_cHRM CHUNK(99,72,82,77) -#define CHUNK_gAMA CHUNK(103,65,77,65) -#define CHUNK_sBIT CHUNK(115,66,73,84) -#define CHUNK_sRGB CHUNK(115,82,71,66) - -/* Unused formal parameter errors are removed using the following macro which is - * expected to have no bad effects on performance. - */ -#ifndef UNUSED -# if defined(__GNUC__) || defined(_MSC_VER) -# define UNUSED(param) (void)param; -# else -# define UNUSED(param) -# endif -#endif - -/***************************** EXCEPTION HANDLING *****************************/ -#ifdef PNG_FREESTANDING_TESTS -# include -#else -# include "../visupng/cexcept.h" -#endif - -#ifdef __cplusplus -# define this not_the_cpp_this -# define new not_the_cpp_new -# define voidcast(type, value) static_cast(value) -#else -# define voidcast(type, value) (value) -#endif /* __cplusplus */ - -struct png_store; -define_exception_type(struct png_store*); - -/* The following are macros to reduce typing everywhere where the well known - * name 'the_exception_context' must be defined. - */ -#define anon_context(ps) struct exception_context *the_exception_context = \ - &(ps)->exception_context -#define context(ps,fault) anon_context(ps); png_store *fault - -/* This macro returns the number of elements in an array as an (unsigned int), - * it is necessary to avoid the inability of certain versions of GCC to use - * the value of a compile-time constant when performing range checks. It must - * be passed an array name. - */ -#define ARRAY_SIZE(a) ((unsigned int)((sizeof (a))/(sizeof (a)[0]))) - -/* GCC BUG 66447 (https://gcc.gnu.org/bugzilla/show_bug.cgi?id=66447) requires - * some broken GCC versions to be fixed up to avoid invalid whining about auto - * variables that are *not* changed within the scope of a setjmp being changed. - * - * Feel free to extend the list of broken versions. - */ -#define is_gnu(major,minor)\ - (defined __GNUC__) && __GNUC__ == (major) && __GNUC_MINOR__ == (minor) -#define is_gnu_patch(major,minor,patch)\ - is_gnu(major,minor) && __GNUC_PATCHLEVEL__ == 0 -/* For the moment just do it always; all versions of GCC seem to be broken: */ -#ifdef __GNUC__ - const void * volatile make_volatile_for_gnu; -# define gnu_volatile(x) make_volatile_for_gnu = &x; -#else /* !GNUC broken versions */ -# define gnu_volatile(x) -#endif /* !GNUC broken versions */ - -/******************************* UTILITIES ************************************/ -/* Error handling is particularly problematic in production code - error - * handlers often themselves have bugs which lead to programs that detect - * minor errors crashing. The following functions deal with one very - * common class of errors in error handlers - attempting to format error or - * warning messages into buffers that are too small. - */ -static size_t safecat(char *buffer, size_t bufsize, size_t pos, - const char *cat) -{ - while (pos < bufsize && cat != NULL && *cat != 0) - buffer[pos++] = *cat++; - - if (pos >= bufsize) - pos = bufsize-1; - - buffer[pos] = 0; - return pos; -} - -static size_t safecatn(char *buffer, size_t bufsize, size_t pos, int n) -{ - char number[64]; - sprintf(number, "%d", n); - return safecat(buffer, bufsize, pos, number); -} - -#ifdef PNG_READ_TRANSFORMS_SUPPORTED -static size_t safecatd(char *buffer, size_t bufsize, size_t pos, double d, - int precision) -{ - char number[64]; - sprintf(number, "%.*f", precision, d); - return safecat(buffer, bufsize, pos, number); -} -#endif - -static const char invalid[] = "invalid"; -static const char sep[] = ": "; - -static const char *colour_types[8] = -{ - "grayscale", invalid, "truecolour", "indexed-colour", - "grayscale with alpha", invalid, "truecolour with alpha", invalid -}; - -#ifdef PNG_READ_TRANSFORMS_SUPPORTED -/* Convert a double precision value to fixed point. */ -static png_fixed_point -fix(double d) -{ - d = floor(d * PNG_FP_1 + .5); - return (png_fixed_point)d; -} -#endif /* PNG_READ_SUPPORTED */ - -/* Generate random bytes. This uses a boring repeatable algorithm and it - * is implemented here so that it gives the same set of numbers on every - * architecture. It's a linear congruential generator (Knuth or Sedgewick - * "Algorithms") but it comes from the 'feedback taps' table in Horowitz and - * Hill, "The Art of Electronics" (Pseudo-Random Bit Sequences and Noise - * Generation.) - */ -static void -make_random_bytes(png_uint_32* seed, void* pv, size_t size) -{ - png_uint_32 u0 = seed[0], u1 = seed[1]; - png_bytep bytes = voidcast(png_bytep, pv); - - /* There are thirty three bits, the next bit in the sequence is bit-33 XOR - * bit-20. The top 1 bit is in u1, the bottom 32 are in u0. - */ - size_t i; - for (i=0; i> (20-8)) ^ ((u1 << 7) | (u0 >> (32-7)))) & 0xff; - u1 <<= 8; - u1 |= u0 >> 24; - u0 <<= 8; - u0 |= u; - *bytes++ = (png_byte)u; - } - - seed[0] = u0; - seed[1] = u1; -} - -static void -make_four_random_bytes(png_uint_32* seed, png_bytep bytes) -{ - make_random_bytes(seed, bytes, 4); -} - -#if defined PNG_READ_SUPPORTED || defined PNG_WRITE_tRNS_SUPPORTED ||\ - defined PNG_WRITE_FILTER_SUPPORTED -static void -randomize(void *pv, size_t size) -{ - static png_uint_32 random_seed[2] = {0x56789abc, 0xd}; - make_random_bytes(random_seed, pv, size); -} - -#define R8(this) randomize(&(this), sizeof (this)) - -#ifdef PNG_READ_SUPPORTED -static png_byte -random_byte(void) -{ - unsigned char b1[1]; - randomize(b1, sizeof b1); - return b1[0]; -} -#endif /* READ */ - -static png_uint_16 -random_u16(void) -{ - unsigned char b2[2]; - randomize(b2, sizeof b2); - return png_get_uint_16(b2); -} - -#if defined PNG_READ_RGB_TO_GRAY_SUPPORTED ||\ - defined PNG_READ_FILLER_SUPPORTED -static png_uint_32 -random_u32(void) -{ - unsigned char b4[4]; - randomize(b4, sizeof b4); - return png_get_uint_32(b4); -} -#endif /* READ_FILLER || READ_RGB_TO_GRAY */ - -#endif /* READ || WRITE_tRNS || WRITE_FILTER */ - -#if defined PNG_READ_TRANSFORMS_SUPPORTED ||\ - defined PNG_WRITE_FILTER_SUPPORTED -static unsigned int -random_mod(unsigned int max) -{ - return random_u16() % max; /* 0 .. max-1 */ -} -#endif /* READ_TRANSFORMS || WRITE_FILTER */ - -#if (defined PNG_READ_RGB_TO_GRAY_SUPPORTED) ||\ - (defined PNG_READ_FILLER_SUPPORTED) -static int -random_choice(void) -{ - return random_byte() & 1; -} -#endif /* READ_RGB_TO_GRAY || READ_FILLER */ - -/* A numeric ID based on PNG file characteristics. The 'do_interlace' field - * simply records whether pngvalid did the interlace itself or whether it - * was done by libpng. Width and height must be less than 256. 'palette' is an - * index of the palette to use for formats with a palette otherwise a boolean - * indicating if a tRNS chunk was generated. - */ -#define FILEID(col, depth, palette, interlace, width, height, do_interlace) \ - ((png_uint_32)((col) + ((depth)<<3) + ((palette)<<8) + ((interlace)<<13) + \ - (((do_interlace)!=0)<<15) + ((width)<<16) + ((height)<<24))) - -#define COL_FROM_ID(id) ((png_byte)((id)& 0x7U)) -#define DEPTH_FROM_ID(id) ((png_byte)(((id) >> 3) & 0x1fU)) -#define PALETTE_FROM_ID(id) (((id) >> 8) & 0x1f) -#define INTERLACE_FROM_ID(id) ((png_byte)(((id) >> 13) & 0x3)) -#define DO_INTERLACE_FROM_ID(id) ((int)(((id)>>15) & 1)) -#define WIDTH_FROM_ID(id) (((id)>>16) & 0xff) -#define HEIGHT_FROM_ID(id) (((id)>>24) & 0xff) - -/* Utility to construct a standard name for a standard image. */ -static size_t -standard_name(char *buffer, size_t bufsize, size_t pos, png_byte colour_type, - int bit_depth, unsigned int npalette, int interlace_type, - png_uint_32 w, png_uint_32 h, int do_interlace) -{ - pos = safecat(buffer, bufsize, pos, colour_types[colour_type]); - if (colour_type == 3) /* must have a palette */ - { - pos = safecat(buffer, bufsize, pos, "["); - pos = safecatn(buffer, bufsize, pos, npalette); - pos = safecat(buffer, bufsize, pos, "]"); - } - - else if (npalette != 0) - pos = safecat(buffer, bufsize, pos, "+tRNS"); - - pos = safecat(buffer, bufsize, pos, " "); - pos = safecatn(buffer, bufsize, pos, bit_depth); - pos = safecat(buffer, bufsize, pos, " bit"); - - if (interlace_type != PNG_INTERLACE_NONE) - { - pos = safecat(buffer, bufsize, pos, " interlaced"); - if (do_interlace) - pos = safecat(buffer, bufsize, pos, "(pngvalid)"); - else - pos = safecat(buffer, bufsize, pos, "(libpng)"); - } - - if (w > 0 || h > 0) - { - pos = safecat(buffer, bufsize, pos, " "); - pos = safecatn(buffer, bufsize, pos, w); - pos = safecat(buffer, bufsize, pos, "x"); - pos = safecatn(buffer, bufsize, pos, h); - } - - return pos; -} - -static size_t -standard_name_from_id(char *buffer, size_t bufsize, size_t pos, png_uint_32 id) -{ - return standard_name(buffer, bufsize, pos, COL_FROM_ID(id), - DEPTH_FROM_ID(id), PALETTE_FROM_ID(id), INTERLACE_FROM_ID(id), - WIDTH_FROM_ID(id), HEIGHT_FROM_ID(id), DO_INTERLACE_FROM_ID(id)); -} - -/* Convenience API and defines to list valid formats. Note that 16 bit read and - * write support is required to do 16 bit read tests (we must be able to make a - * 16 bit image to test!) - */ -#ifdef PNG_WRITE_16BIT_SUPPORTED -# define WRITE_BDHI 4 -# ifdef PNG_READ_16BIT_SUPPORTED -# define READ_BDHI 4 -# define DO_16BIT -# endif -#else -# define WRITE_BDHI 3 -#endif -#ifndef DO_16BIT -# define READ_BDHI 3 -#endif - -/* The following defines the number of different palettes to generate for - * each log bit depth of a colour type 3 standard image. - */ -#define PALETTE_COUNT(bit_depth) ((bit_depth) > 4 ? 1U : 16U) - -static int -next_format(png_bytep colour_type, png_bytep bit_depth, - unsigned int* palette_number, int low_depth_gray, int tRNS) -{ - if (*bit_depth == 0) - { - *colour_type = 0; - if (low_depth_gray) - *bit_depth = 1; - else - *bit_depth = 8; - *palette_number = 0; - return 1; - } - - if (*colour_type < 4/*no alpha channel*/) - { - /* Add multiple palettes for colour type 3, one image with tRNS - * and one without for other non-alpha formats: - */ - unsigned int pn = ++*palette_number; - png_byte ct = *colour_type; - - if (((ct == 0/*GRAY*/ || ct/*RGB*/ == 2) && tRNS && pn < 2) || - (ct == 3/*PALETTE*/ && pn < PALETTE_COUNT(*bit_depth))) - return 1; - - /* No: next bit depth */ - *palette_number = 0; - } - - *bit_depth = (png_byte)(*bit_depth << 1); - - /* Palette images are restricted to 8 bit depth */ - if (*bit_depth <= 8 -#ifdef DO_16BIT - || (*colour_type != 3 && *bit_depth <= 16) -#endif - ) - return 1; - - /* Move to the next color type, or return 0 at the end. */ - switch (*colour_type) - { - case 0: - *colour_type = 2; - *bit_depth = 8; - return 1; - - case 2: - *colour_type = 3; - *bit_depth = 1; - return 1; - - case 3: - *colour_type = 4; - *bit_depth = 8; - return 1; - - case 4: - *colour_type = 6; - *bit_depth = 8; - return 1; - - default: - return 0; - } -} - -#ifdef PNG_READ_TRANSFORMS_SUPPORTED -static unsigned int -sample(png_const_bytep row, png_byte colour_type, png_byte bit_depth, - png_uint_32 x, unsigned int sample_index, int swap16, int littleendian) -{ - png_uint_32 bit_index, result; - - /* Find a sample index for the desired sample: */ - x *= bit_depth; - bit_index = x; - - if ((colour_type & 1) == 0) /* !palette */ - { - if (colour_type & 2) - bit_index *= 3; - - if (colour_type & 4) - bit_index += x; /* Alpha channel */ - - /* Multiple channels; select one: */ - if (colour_type & (2+4)) - bit_index += sample_index * bit_depth; - } - - /* Return the sample from the row as an integer. */ - row += bit_index >> 3; - result = *row; - - if (bit_depth == 8) - return result; - - else if (bit_depth > 8) - { - if (swap16) - return (*++row << 8) + result; - else - return (result << 8) + *++row; - } - - /* Less than 8 bits per sample. By default PNG has the big end of - * the egg on the left of the screen, but if littleendian is set - * then the big end is on the right. - */ - bit_index &= 7; - - if (!littleendian) - bit_index = 8-bit_index-bit_depth; - - return (result >> bit_index) & ((1U<> 3] & ~destMask; - unsigned int sourceByte = fromBuffer[fromIndex >> 3]; - - /* Don't rely on << or >> supporting '0' here, just in case: */ - fromIndex &= 7; - if (littleendian) - { - if (fromIndex > 0) sourceByte >>= fromIndex; - if ((toIndex & 7) > 0) sourceByte <<= toIndex & 7; - } - - else - { - if (fromIndex > 0) sourceByte <<= fromIndex; - if ((toIndex & 7) > 0) sourceByte >>= toIndex & 7; - } - - toBuffer[toIndex >> 3] = (png_byte)(destByte | (sourceByte & destMask)); - } - else /* One or more bytes */ - memmove(toBuffer+(toIndex>>3), fromBuffer+(fromIndex>>3), pixelSize>>3); -} - -#ifdef PNG_READ_SUPPORTED -/* Copy a complete row of pixels, taking into account potential partial - * bytes at the end. - */ -static void -row_copy(png_bytep toBuffer, png_const_bytep fromBuffer, unsigned int bitWidth, - int littleendian) -{ - memcpy(toBuffer, fromBuffer, bitWidth >> 3); - - if ((bitWidth & 7) != 0) - { - unsigned int mask; - - toBuffer += bitWidth >> 3; - fromBuffer += bitWidth >> 3; - if (littleendian) - mask = 0xff << (bitWidth & 7); - else - mask = 0xff >> (bitWidth & 7); - *toBuffer = (png_byte)((*toBuffer & mask) | (*fromBuffer & ~mask)); - } -} - -/* Compare pixels - they are assumed to start at the first byte in the - * given buffers. - */ -static int -pixel_cmp(png_const_bytep pa, png_const_bytep pb, png_uint_32 bit_width) -{ -#if PNG_LIBPNG_VER < 10506 - if (memcmp(pa, pb, bit_width>>3) == 0) - { - png_uint_32 p; - - if ((bit_width & 7) == 0) return 0; - - /* Ok, any differences? */ - p = pa[bit_width >> 3]; - p ^= pb[bit_width >> 3]; - - if (p == 0) return 0; - - /* There are, but they may not be significant, remove the bits - * after the end (the low order bits in PNG.) - */ - bit_width &= 7; - p >>= 8-bit_width; - - if (p == 0) return 0; - } -#else - /* From libpng-1.5.6 the overwrite should be fixed, so compare the trailing - * bits too: - */ - if (memcmp(pa, pb, (bit_width+7)>>3) == 0) - return 0; -#endif - - /* Return the index of the changed byte. */ - { - png_uint_32 where = 0; - - while (pa[where] == pb[where]) ++where; - return 1+where; - } -} -#endif /* PNG_READ_SUPPORTED */ - -/*************************** BASIC PNG FILE WRITING ***************************/ -/* A png_store takes data from the sequential writer or provides data - * to the sequential reader. It can also store the result of a PNG - * write for later retrieval. - */ -#define STORE_BUFFER_SIZE 500 /* arbitrary */ -typedef struct png_store_buffer -{ - struct png_store_buffer* prev; /* NOTE: stored in reverse order */ - png_byte buffer[STORE_BUFFER_SIZE]; -} png_store_buffer; - -#define FILE_NAME_SIZE 64 - -typedef struct store_palette_entry /* record of a single palette entry */ -{ - png_byte red; - png_byte green; - png_byte blue; - png_byte alpha; -} store_palette_entry, store_palette[256]; - -typedef struct png_store_file -{ - struct png_store_file* next; /* as many as you like... */ - char name[FILE_NAME_SIZE]; - unsigned int IDAT_bits; /* Number of bits in IDAT size */ - png_uint_32 IDAT_size; /* Total size of IDAT data */ - png_uint_32 id; /* must be correct (see FILEID) */ - size_t datacount; /* In this (the last) buffer */ - png_store_buffer data; /* Last buffer in file */ - int npalette; /* Number of entries in palette */ - store_palette_entry* palette; /* May be NULL */ -} png_store_file; - -/* The following is a pool of memory allocated by a single libpng read or write - * operation. - */ -typedef struct store_pool -{ - struct png_store *store; /* Back pointer */ - struct store_memory *list; /* List of allocated memory */ - png_byte mark[4]; /* Before and after data */ - - /* Statistics for this run. */ - png_alloc_size_t max; /* Maximum single allocation */ - png_alloc_size_t current; /* Current allocation */ - png_alloc_size_t limit; /* Highest current allocation */ - png_alloc_size_t total; /* Total allocation */ - - /* Overall statistics (retained across successive runs). */ - png_alloc_size_t max_max; - png_alloc_size_t max_limit; - png_alloc_size_t max_total; -} store_pool; - -typedef struct png_store -{ - /* For cexcept.h exception handling - simply store one of these; - * the context is a self pointer but it may point to a different - * png_store (in fact it never does in this program.) - */ - struct exception_context - exception_context; - - unsigned int verbose :1; - unsigned int treat_warnings_as_errors :1; - unsigned int expect_error :1; - unsigned int expect_warning :1; - unsigned int saw_warning :1; - unsigned int speed :1; - unsigned int progressive :1; /* use progressive read */ - unsigned int validated :1; /* used as a temporary flag */ - int nerrors; - int nwarnings; - int noptions; /* number of options below: */ - struct { - unsigned char option; /* option number, 0..30 */ - unsigned char setting; /* setting (unset,invalid,on,off) */ - } options[16]; - char test[128]; /* Name of test */ - char error[256]; - - /* Share fields */ - png_uint_32 chunklen; /* Length of chunk+overhead (chunkpos >= 8) */ - png_uint_32 chunktype;/* Type of chunk (valid if chunkpos >= 4) */ - png_uint_32 chunkpos; /* Position in chunk */ - png_uint_32 IDAT_size;/* Accumulated IDAT size in .new */ - unsigned int IDAT_bits;/* Cache of the file store value */ - - /* Read fields */ - png_structp pread; /* Used to read a saved file */ - png_infop piread; - png_store_file* current; /* Set when reading */ - png_store_buffer* next; /* Set when reading */ - size_t readpos; /* Position in *next */ - png_byte* image; /* Buffer for reading interlaced images */ - size_t cb_image; /* Size of this buffer */ - size_t cb_row; /* Row size of the image(s) */ - uLong IDAT_crc; - png_uint_32 IDAT_len; /* Used when re-chunking IDAT chunks */ - png_uint_32 IDAT_pos; /* Used when re-chunking IDAT chunks */ - png_uint_32 image_h; /* Number of rows in a single image */ - store_pool read_memory_pool; - - /* Write fields */ - png_store_file* saved; - png_structp pwrite; /* Used when writing a new file */ - png_infop piwrite; - size_t writepos; /* Position in .new */ - char wname[FILE_NAME_SIZE]; - png_store_buffer new; /* The end of the new PNG file being written. */ - store_pool write_memory_pool; - store_palette_entry* palette; - int npalette; -} png_store; - -/* Initialization and cleanup */ -static void -store_pool_mark(png_bytep mark) -{ - static png_uint_32 store_seed[2] = { 0x12345678, 1}; - - make_four_random_bytes(store_seed, mark); -} - -#ifdef PNG_READ_TRANSFORMS_SUPPORTED -/* Use this for random 32 bit values; this function makes sure the result is - * non-zero. - */ -static png_uint_32 -random_32(void) -{ - - for (;;) - { - png_byte mark[4]; - png_uint_32 result; - - store_pool_mark(mark); - result = png_get_uint_32(mark); - - if (result != 0) - return result; - } -} -#endif /* PNG_READ_SUPPORTED */ - -static void -store_pool_init(png_store *ps, store_pool *pool) -{ - memset(pool, 0, sizeof *pool); - - pool->store = ps; - pool->list = NULL; - pool->max = pool->current = pool->limit = pool->total = 0; - pool->max_max = pool->max_limit = pool->max_total = 0; - store_pool_mark(pool->mark); -} - -static void -store_init(png_store* ps) -{ - memset(ps, 0, sizeof *ps); - init_exception_context(&ps->exception_context); - store_pool_init(ps, &ps->read_memory_pool); - store_pool_init(ps, &ps->write_memory_pool); - ps->verbose = 0; - ps->treat_warnings_as_errors = 0; - ps->expect_error = 0; - ps->expect_warning = 0; - ps->saw_warning = 0; - ps->speed = 0; - ps->progressive = 0; - ps->validated = 0; - ps->nerrors = ps->nwarnings = 0; - ps->pread = NULL; - ps->piread = NULL; - ps->saved = ps->current = NULL; - ps->next = NULL; - ps->readpos = 0; - ps->image = NULL; - ps->cb_image = 0; - ps->cb_row = 0; - ps->image_h = 0; - ps->pwrite = NULL; - ps->piwrite = NULL; - ps->writepos = 0; - ps->chunkpos = 8; - ps->chunktype = 0; - ps->chunklen = 16; - ps->IDAT_size = 0; - ps->IDAT_bits = 0; - ps->new.prev = NULL; - ps->palette = NULL; - ps->npalette = 0; - ps->noptions = 0; -} - -static void -store_freebuffer(png_store_buffer* psb) -{ - if (psb->prev) - { - store_freebuffer(psb->prev); - free(psb->prev); - psb->prev = NULL; - } -} - -static void -store_freenew(png_store *ps) -{ - store_freebuffer(&ps->new); - ps->writepos = 0; - ps->chunkpos = 8; - ps->chunktype = 0; - ps->chunklen = 16; - ps->IDAT_size = 0; - ps->IDAT_bits = 0; - if (ps->palette != NULL) - { - free(ps->palette); - ps->palette = NULL; - ps->npalette = 0; - } -} - -static void -store_storenew(png_store *ps) -{ - png_store_buffer *pb; - - pb = voidcast(png_store_buffer*, malloc(sizeof *pb)); - - if (pb == NULL) - png_error(ps->pwrite, "store new: OOM"); - - *pb = ps->new; - ps->new.prev = pb; - ps->writepos = 0; -} - -static void -store_freefile(png_store_file **ppf) -{ - if (*ppf != NULL) - { - store_freefile(&(*ppf)->next); - - store_freebuffer(&(*ppf)->data); - (*ppf)->datacount = 0; - if ((*ppf)->palette != NULL) - { - free((*ppf)->palette); - (*ppf)->palette = NULL; - (*ppf)->npalette = 0; - } - free(*ppf); - *ppf = NULL; - } -} - -static unsigned int -bits_of(png_uint_32 num) -{ - /* Return the number of bits in 'num' */ - unsigned int b = 0; - - if (num & 0xffff0000U) b += 16U, num >>= 16; - if (num & 0xff00U) b += 8U, num >>= 8; - if (num & 0xf0U) b += 4U, num >>= 4; - if (num & 0xcU) b += 2U, num >>= 2; - if (num & 0x2U) ++b, num >>= 1; - if (num) ++b; - - return b; /* 0..32 */ -} - -/* Main interface to file storage, after writing a new PNG file (see the API - * below) call store_storefile to store the result with the given name and id. - */ -static void -store_storefile(png_store *ps, png_uint_32 id) -{ - png_store_file *pf; - - if (ps->chunkpos != 0U || ps->chunktype != 0U || ps->chunklen != 0U || - ps->IDAT_size == 0) - png_error(ps->pwrite, "storefile: incomplete write"); - - pf = voidcast(png_store_file*, malloc(sizeof *pf)); - if (pf == NULL) - png_error(ps->pwrite, "storefile: OOM"); - safecat(pf->name, sizeof pf->name, 0, ps->wname); - pf->id = id; - pf->data = ps->new; - pf->datacount = ps->writepos; - pf->IDAT_size = ps->IDAT_size; - pf->IDAT_bits = bits_of(ps->IDAT_size); - /* Because the IDAT always has zlib header stuff this must be true: */ - if (pf->IDAT_bits == 0U) - png_error(ps->pwrite, "storefile: 0 sized IDAT"); - ps->new.prev = NULL; - ps->writepos = 0; - ps->chunkpos = 8; - ps->chunktype = 0; - ps->chunklen = 16; - ps->IDAT_size = 0; - pf->palette = ps->palette; - pf->npalette = ps->npalette; - ps->palette = 0; - ps->npalette = 0; - - /* And save it. */ - pf->next = ps->saved; - ps->saved = pf; -} - -/* Generate an error message (in the given buffer) */ -static size_t -store_message(png_store *ps, png_const_structp pp, char *buffer, size_t bufsize, - size_t pos, const char *msg) -{ - if (pp != NULL && pp == ps->pread) - { - /* Reading a file */ - pos = safecat(buffer, bufsize, pos, "read: "); - - if (ps->current != NULL) - { - pos = safecat(buffer, bufsize, pos, ps->current->name); - pos = safecat(buffer, bufsize, pos, sep); - } - } - - else if (pp != NULL && pp == ps->pwrite) - { - /* Writing a file */ - pos = safecat(buffer, bufsize, pos, "write: "); - pos = safecat(buffer, bufsize, pos, ps->wname); - pos = safecat(buffer, bufsize, pos, sep); - } - - else - { - /* Neither reading nor writing (or a memory error in struct delete) */ - pos = safecat(buffer, bufsize, pos, "pngvalid: "); - } - - if (ps->test[0] != 0) - { - pos = safecat(buffer, bufsize, pos, ps->test); - pos = safecat(buffer, bufsize, pos, sep); - } - pos = safecat(buffer, bufsize, pos, msg); - return pos; -} - -/* Verbose output to the error stream: */ -static void -store_verbose(png_store *ps, png_const_structp pp, png_const_charp prefix, - png_const_charp message) -{ - char buffer[512]; - - if (prefix) - fputs(prefix, stderr); - - (void)store_message(ps, pp, buffer, sizeof buffer, 0, message); - fputs(buffer, stderr); - fputc('\n', stderr); -} - -/* Log an error or warning - the relevant count is always incremented. */ -static void -store_log(png_store* ps, png_const_structp pp, png_const_charp message, - int is_error) -{ - /* The warning is copied to the error buffer if there are no errors and it is - * the first warning. The error is copied to the error buffer if it is the - * first error (overwriting any prior warnings). - */ - if (is_error ? (ps->nerrors)++ == 0 : - (ps->nwarnings)++ == 0 && ps->nerrors == 0) - store_message(ps, pp, ps->error, sizeof ps->error, 0, message); - - if (ps->verbose) - store_verbose(ps, pp, is_error ? "error: " : "warning: ", message); -} - -#ifdef PNG_READ_SUPPORTED -/* Internal error function, called with a png_store but no libpng stuff. */ -static void -internal_error(png_store *ps, png_const_charp message) -{ - store_log(ps, NULL, message, 1 /* error */); - - /* And finally throw an exception. */ - { - struct exception_context *the_exception_context = &ps->exception_context; - Throw ps; - } -} -#endif /* PNG_READ_SUPPORTED */ - -/* Functions to use as PNG callbacks. */ -static void PNGCBAPI -store_error(png_structp ppIn, png_const_charp message) /* PNG_NORETURN */ -{ - png_const_structp pp = ppIn; - png_store *ps = voidcast(png_store*, png_get_error_ptr(pp)); - - if (!ps->expect_error) - store_log(ps, pp, message, 1 /* error */); - - /* And finally throw an exception. */ - { - struct exception_context *the_exception_context = &ps->exception_context; - Throw ps; - } -} - -static void PNGCBAPI -store_warning(png_structp ppIn, png_const_charp message) -{ - png_const_structp pp = ppIn; - png_store *ps = voidcast(png_store*, png_get_error_ptr(pp)); - - if (!ps->expect_warning) - store_log(ps, pp, message, 0 /* warning */); - else - ps->saw_warning = 1; -} - -/* These somewhat odd functions are used when reading an image to ensure that - * the buffer is big enough, the png_structp is for errors. - */ -/* Return a single row from the correct image. */ -static png_bytep -store_image_row(const png_store* ps, png_const_structp pp, int nImage, - png_uint_32 y) -{ - size_t coffset = (nImage * ps->image_h + y) * (ps->cb_row + 5) + 2; - - if (ps->image == NULL) - png_error(pp, "no allocated image"); - - if (coffset + ps->cb_row + 3 > ps->cb_image) - png_error(pp, "image too small"); - - return ps->image + coffset; -} - -static void -store_image_free(png_store *ps, png_const_structp pp) -{ - if (ps->image != NULL) - { - png_bytep image = ps->image; - - if (image[-1] != 0xed || image[ps->cb_image] != 0xfe) - { - if (pp != NULL) - png_error(pp, "png_store image overwrite (1)"); - else - store_log(ps, NULL, "png_store image overwrite (2)", 1); - } - - ps->image = NULL; - ps->cb_image = 0; - --image; - free(image); - } -} - -static void -store_ensure_image(png_store *ps, png_const_structp pp, int nImages, - size_t cbRow, png_uint_32 cRows) -{ - size_t cb = nImages * cRows * (cbRow + 5); - - if (ps->cb_image < cb) - { - png_bytep image; - - store_image_free(ps, pp); - - /* The buffer is deliberately mis-aligned. */ - image = voidcast(png_bytep, malloc(cb+2)); - if (image == NULL) - { - /* Called from the startup - ignore the error for the moment. */ - if (pp == NULL) - return; - - png_error(pp, "OOM allocating image buffer"); - } - - /* These magic tags are used to detect overwrites above. */ - ++image; - image[-1] = 0xed; - image[cb] = 0xfe; - - ps->image = image; - ps->cb_image = cb; - } - - /* We have an adequate sized image; lay out the rows. There are 2 bytes at - * the start and three at the end of each (this ensures that the row - * alignment starts out odd - 2+1 and changes for larger images on each row.) - */ - ps->cb_row = cbRow; - ps->image_h = cRows; - - /* For error checking, the whole buffer is set to 10110010 (0xb2 - 178). - * This deliberately doesn't match the bits in the size test image which are - * outside the image; these are set to 0xff (all 1). To make the row - * comparison work in the 'size' test case the size rows are pre-initialized - * to the same value prior to calling 'standard_row'. - */ - memset(ps->image, 178, cb); - - /* Then put in the marks. */ - while (--nImages >= 0) - { - png_uint_32 y; - - for (y=0; yimage; - - if (image[-1] != 0xed || image[ps->cb_image] != 0xfe) - png_error(pp, "image overwrite"); - else - { - size_t cbRow = ps->cb_row; - png_uint_32 rows = ps->image_h; - - image += iImage * (cbRow+5) * ps->image_h; - - image += 2; /* skip image first row markers */ - - for (; rows > 0; --rows) - { - if (image[-2] != 190 || image[-1] != 239) - png_error(pp, "row start overwritten"); - - if (image[cbRow] != 222 || image[cbRow+1] != 173 || - image[cbRow+2] != 17) - png_error(pp, "row end overwritten"); - - image += cbRow+5; - } - } -} -#endif /* PNG_READ_SUPPORTED */ - -static int -valid_chunktype(png_uint_32 chunktype) -{ - /* Each byte in the chunk type must be in one of the ranges 65..90, 97..122 - * (both inclusive), so: - */ - unsigned int i; - - for (i=0; i<4; ++i) - { - unsigned int c = chunktype & 0xffU; - - if (!((c >= 65U && c <= 90U) || (c >= 97U && c <= 122U))) - return 0; - - chunktype >>= 8; - } - - return 1; /* It's valid */ -} - -static void PNGCBAPI -store_write(png_structp ppIn, png_bytep pb, size_t st) -{ - png_const_structp pp = ppIn; - png_store *ps = voidcast(png_store*, png_get_io_ptr(pp)); - size_t writepos = ps->writepos; - png_uint_32 chunkpos = ps->chunkpos; - png_uint_32 chunktype = ps->chunktype; - png_uint_32 chunklen = ps->chunklen; - - if (ps->pwrite != pp) - png_error(pp, "store state damaged"); - - /* Technically this is legal, but in practice libpng never writes more than - * the maximum chunk size at once so if it happens something weird has - * changed inside libpng (probably). - */ - if (st > 0x7fffffffU) - png_error(pp, "unexpected write size"); - - /* Now process the bytes to be written. Do this in units of the space in the - * output (write) buffer or, at the start 4 bytes for the chunk type and - * length limited in any case by the amount of data. - */ - while (st > 0) - { - if (writepos >= STORE_BUFFER_SIZE) - store_storenew(ps), writepos = 0; - - if (chunkpos < 4) - { - png_byte b = *pb++; - --st; - chunklen = (chunklen << 8) + b; - ps->new.buffer[writepos++] = b; - ++chunkpos; - } - - else if (chunkpos < 8) - { - png_byte b = *pb++; - --st; - chunktype = (chunktype << 8) + b; - ps->new.buffer[writepos++] = b; - - if (++chunkpos == 8) - { - chunklen &= 0xffffffffU; - if (chunklen > 0x7fffffffU) - png_error(pp, "chunk length too great"); - - chunktype &= 0xffffffffU; - if (chunktype == CHUNK_IDAT) - { - if (chunklen > ~ps->IDAT_size) - png_error(pp, "pngvalid internal image too large"); - - ps->IDAT_size += chunklen; - } - - else if (!valid_chunktype(chunktype)) - png_error(pp, "invalid chunk type"); - - chunklen += 12; /* for header and CRC */ - } - } - - else /* chunkpos >= 8 */ - { - size_t cb = st; - - if (cb > STORE_BUFFER_SIZE - writepos) - cb = STORE_BUFFER_SIZE - writepos; - - if (cb > chunklen - chunkpos/* bytes left in chunk*/) - cb = (size_t)/*SAFE*/(chunklen - chunkpos); - - memcpy(ps->new.buffer + writepos, pb, cb); - chunkpos += (png_uint_32)/*SAFE*/cb; - pb += cb; - writepos += cb; - st -= cb; - - if (chunkpos >= chunklen) /* must be equal */ - chunkpos = chunktype = chunklen = 0; - } - } /* while (st > 0) */ - - ps->writepos = writepos; - ps->chunkpos = chunkpos; - ps->chunktype = chunktype; - ps->chunklen = chunklen; -} - -static void PNGCBAPI -store_flush(png_structp ppIn) -{ - UNUSED(ppIn) /*DOES NOTHING*/ -} - -#ifdef PNG_READ_SUPPORTED -static size_t -store_read_buffer_size(png_store *ps) -{ - /* Return the bytes available for read in the current buffer. */ - if (ps->next != &ps->current->data) - return STORE_BUFFER_SIZE; - - return ps->current->datacount; -} - -/* Return total bytes available for read. */ -static size_t -store_read_buffer_avail(png_store *ps) -{ - if (ps->current != NULL && ps->next != NULL) - { - png_store_buffer *next = &ps->current->data; - size_t cbAvail = ps->current->datacount; - - while (next != ps->next && next != NULL) - { - next = next->prev; - cbAvail += STORE_BUFFER_SIZE; - } - - if (next != ps->next) - png_error(ps->pread, "buffer read error"); - - if (cbAvail > ps->readpos) - return cbAvail - ps->readpos; - } - - return 0; -} - -static int -store_read_buffer_next(png_store *ps) -{ - png_store_buffer *pbOld = ps->next; - png_store_buffer *pbNew = &ps->current->data; - if (pbOld != pbNew) - { - while (pbNew != NULL && pbNew->prev != pbOld) - pbNew = pbNew->prev; - - if (pbNew != NULL) - { - ps->next = pbNew; - ps->readpos = 0; - return 1; - } - - png_error(ps->pread, "buffer lost"); - } - - return 0; /* EOF or error */ -} - -/* Need separate implementation and callback to allow use of the same code - * during progressive read, where the io_ptr is set internally by libpng. - */ -static void -store_read_imp(png_store *ps, png_bytep pb, size_t st) -{ - if (ps->current == NULL || ps->next == NULL) - png_error(ps->pread, "store state damaged"); - - while (st > 0) - { - size_t cbAvail = store_read_buffer_size(ps) - ps->readpos; - - if (cbAvail > 0) - { - if (cbAvail > st) cbAvail = st; - memcpy(pb, ps->next->buffer + ps->readpos, cbAvail); - st -= cbAvail; - pb += cbAvail; - ps->readpos += cbAvail; - } - - else if (!store_read_buffer_next(ps)) - png_error(ps->pread, "read beyond end of file"); - } -} - -static size_t -store_read_chunk(png_store *ps, png_bytep pb, size_t max, size_t min) -{ - png_uint_32 chunklen = ps->chunklen; - png_uint_32 chunktype = ps->chunktype; - png_uint_32 chunkpos = ps->chunkpos; - size_t st = max; - - if (st > 0) do - { - if (chunkpos >= chunklen) /* end of last chunk */ - { - png_byte buffer[8]; - - /* Read the header of the next chunk: */ - store_read_imp(ps, buffer, 8U); - chunklen = png_get_uint_32(buffer) + 12U; - chunktype = png_get_uint_32(buffer+4U); - chunkpos = 0U; /* Position read so far */ - } - - if (chunktype == CHUNK_IDAT) - { - png_uint_32 IDAT_pos = ps->IDAT_pos; - png_uint_32 IDAT_len = ps->IDAT_len; - png_uint_32 IDAT_size = ps->IDAT_size; - - /* The IDAT headers are constructed here; skip the input header. */ - if (chunkpos < 8U) - chunkpos = 8U; - - if (IDAT_pos == IDAT_len) - { - png_byte random = random_byte(); - - /* Make a new IDAT chunk, if IDAT_len is 0 this is the first IDAT, - * if IDAT_size is 0 this is the end. At present this is set up - * using a random number so that there is a 25% chance before - * the start of the first IDAT chunk being 0 length. - */ - if (IDAT_len == 0U) /* First IDAT */ - { - switch (random & 3U) - { - case 0U: IDAT_len = 12U; break; /* 0 bytes */ - case 1U: IDAT_len = 13U; break; /* 1 byte */ - default: IDAT_len = random_u32(); - IDAT_len %= IDAT_size; - IDAT_len += 13U; /* 1..IDAT_size bytes */ - break; - } - } - - else if (IDAT_size == 0U) /* all IDAT data read */ - { - /* The last (IDAT) chunk should be positioned at the CRC now: */ - if (chunkpos != chunklen-4U) - png_error(ps->pread, "internal: IDAT size mismatch"); - - /* The only option here is to add a zero length IDAT, this - * happens 25% of the time. Because of the check above - * chunklen-4U-chunkpos must be zero, we just need to skip the - * CRC now. - */ - if ((random & 3U) == 0U) - IDAT_len = 12U; /* Output another 0 length IDAT */ - - else - { - /* End of IDATs, skip the CRC to make the code above load the - * next chunk header next time round. - */ - png_byte buffer[4]; - - store_read_imp(ps, buffer, 4U); - chunkpos += 4U; - ps->IDAT_pos = IDAT_pos; - ps->IDAT_len = IDAT_len; - ps->IDAT_size = 0U; - continue; /* Read the next chunk */ - } - } - - else - { - /* Middle of IDATs, use 'random' to determine the number of bits - * to use in the IDAT length. - */ - IDAT_len = random_u32(); - IDAT_len &= (1U << (1U + random % ps->IDAT_bits)) - 1U; - if (IDAT_len > IDAT_size) - IDAT_len = IDAT_size; - IDAT_len += 12U; /* zero bytes may occur */ - } - - IDAT_pos = 0U; - ps->IDAT_crc = 0x35af061e; /* Ie: crc32(0UL, "IDAT", 4) */ - } /* IDAT_pos == IDAT_len */ - - if (IDAT_pos < 8U) /* Return the header */ do - { - png_uint_32 b; - unsigned int shift; - - if (IDAT_pos < 4U) - b = IDAT_len - 12U; - - else - b = CHUNK_IDAT; - - shift = 3U & IDAT_pos; - ++IDAT_pos; - - if (shift < 3U) - b >>= 8U*(3U-shift); - - *pb++ = 0xffU & b; - } - while (--st > 0 && IDAT_pos < 8); - - else if (IDAT_pos < IDAT_len - 4U) /* I.e not the CRC */ - { - if (chunkpos < chunklen-4U) - { - uInt avail = (uInt)-1; - - if (avail > (IDAT_len-4U) - IDAT_pos) - avail = (uInt)/*SAFE*/((IDAT_len-4U) - IDAT_pos); - - if (avail > st) - avail = (uInt)/*SAFE*/st; - - if (avail > (chunklen-4U) - chunkpos) - avail = (uInt)/*SAFE*/((chunklen-4U) - chunkpos); - - store_read_imp(ps, pb, avail); - ps->IDAT_crc = crc32(ps->IDAT_crc, pb, avail); - pb += (size_t)/*SAFE*/avail; - st -= (size_t)/*SAFE*/avail; - chunkpos += (png_uint_32)/*SAFE*/avail; - IDAT_size -= (png_uint_32)/*SAFE*/avail; - IDAT_pos += (png_uint_32)/*SAFE*/avail; - } - - else /* skip the input CRC */ - { - png_byte buffer[4]; - - store_read_imp(ps, buffer, 4U); - chunkpos += 4U; - } - } - - else /* IDAT crc */ do - { - uLong b = ps->IDAT_crc; - unsigned int shift = (IDAT_len - IDAT_pos); /* 4..1 */ - ++IDAT_pos; - - if (shift > 1U) - b >>= 8U*(shift-1U); - - *pb++ = 0xffU & b; - } - while (--st > 0 && IDAT_pos < IDAT_len); - - ps->IDAT_pos = IDAT_pos; - ps->IDAT_len = IDAT_len; - ps->IDAT_size = IDAT_size; - } - - else /* !IDAT */ - { - /* If there is still some pending IDAT data after the IDAT chunks have - * been processed there is a problem: - */ - if (ps->IDAT_len > 0 && ps->IDAT_size > 0) - png_error(ps->pread, "internal: missing IDAT data"); - - if (chunktype == CHUNK_IEND && ps->IDAT_len == 0U) - png_error(ps->pread, "internal: missing IDAT"); - - if (chunkpos < 8U) /* Return the header */ do - { - png_uint_32 b; - unsigned int shift; - - if (chunkpos < 4U) - b = chunklen - 12U; - - else - b = chunktype; - - shift = 3U & chunkpos; - ++chunkpos; - - if (shift < 3U) - b >>= 8U*(3U-shift); - - *pb++ = 0xffU & b; - } - while (--st > 0 && chunkpos < 8); - - else /* Return chunk bytes, including the CRC */ - { - size_t avail = st; - - if (avail > chunklen - chunkpos) - avail = (size_t)/*SAFE*/(chunklen - chunkpos); - - store_read_imp(ps, pb, avail); - pb += avail; - st -= avail; - chunkpos += (png_uint_32)/*SAFE*/avail; - - /* Check for end of chunk and end-of-file; don't try to read a new - * chunk header at this point unless instructed to do so by 'min'. - */ - if (chunkpos >= chunklen && max-st >= min && - store_read_buffer_avail(ps) == 0) - break; - } - } /* !IDAT */ - } - while (st > 0); - - ps->chunklen = chunklen; - ps->chunktype = chunktype; - ps->chunkpos = chunkpos; - - return st; /* space left */ -} - -static void PNGCBAPI -store_read(png_structp ppIn, png_bytep pb, size_t st) -{ - png_const_structp pp = ppIn; - png_store *ps = voidcast(png_store*, png_get_io_ptr(pp)); - - if (ps == NULL || ps->pread != pp) - png_error(pp, "bad store read call"); - - store_read_chunk(ps, pb, st, st); -} - -static void -store_progressive_read(png_store *ps, png_structp pp, png_infop pi) -{ - if (ps->pread != pp || ps->current == NULL || ps->next == NULL) - png_error(pp, "store state damaged (progressive)"); - - /* This is another Horowitz and Hill random noise generator. In this case - * the aim is to stress the progressive reader with truly horrible variable - * buffer sizes in the range 1..500, so a sequence of 9 bit random numbers - * is generated. We could probably just count from 1 to 32767 and get as - * good a result. - */ - while (store_read_buffer_avail(ps) > 0) - { - static png_uint_32 noise = 2; - size_t cb; - png_byte buffer[512]; - - /* Generate 15 more bits of stuff: */ - noise = (noise << 9) | ((noise ^ (noise >> (9-5))) & 0x1ff); - cb = noise & 0x1ff; - cb -= store_read_chunk(ps, buffer, cb, 1); - png_process_data(pp, pi, buffer, cb); - } -} -#endif /* PNG_READ_SUPPORTED */ - -/* The caller must fill this in: */ -static store_palette_entry * -store_write_palette(png_store *ps, int npalette) -{ - if (ps->pwrite == NULL) - store_log(ps, NULL, "attempt to write palette without write stream", 1); - - if (ps->palette != NULL) - png_error(ps->pwrite, "multiple store_write_palette calls"); - - /* This function can only return NULL if called with '0'! */ - if (npalette > 0) - { - ps->palette = voidcast(store_palette_entry*, malloc(npalette * - sizeof *ps->palette)); - - if (ps->palette == NULL) - png_error(ps->pwrite, "store new palette: OOM"); - - ps->npalette = npalette; - } - - return ps->palette; -} - -#ifdef PNG_READ_SUPPORTED -static store_palette_entry * -store_current_palette(png_store *ps, int *npalette) -{ - /* This is an internal error (the call has been made outside a read - * operation.) - */ - if (ps->current == NULL) - { - store_log(ps, ps->pread, "no current stream for palette", 1); - return NULL; - } - - /* The result may be null if there is no palette. */ - *npalette = ps->current->npalette; - return ps->current->palette; -} -#endif /* PNG_READ_SUPPORTED */ - -/***************************** MEMORY MANAGEMENT*** ***************************/ -#ifdef PNG_USER_MEM_SUPPORTED -/* A store_memory is simply the header for an allocated block of memory. The - * pointer returned to libpng is just after the end of the header block, the - * allocated memory is followed by a second copy of the 'mark'. - */ -typedef struct store_memory -{ - store_pool *pool; /* Originating pool */ - struct store_memory *next; /* Singly linked list */ - png_alloc_size_t size; /* Size of memory allocated */ - png_byte mark[4]; /* ID marker */ -} store_memory; - -/* Handle a fatal error in memory allocation. This calls png_error if the - * libpng struct is non-NULL, else it outputs a message and returns. This means - * that a memory problem while libpng is running will abort (png_error) the - * handling of particular file while one in cleanup (after the destroy of the - * struct has returned) will simply keep going and free (or attempt to free) - * all the memory. - */ -static void -store_pool_error(png_store *ps, png_const_structp pp, const char *msg) -{ - if (pp != NULL) - png_error(pp, msg); - - /* Else we have to do it ourselves. png_error eventually calls store_log, - * above. store_log accepts a NULL png_structp - it just changes what gets - * output by store_message. - */ - store_log(ps, pp, msg, 1 /* error */); -} - -static void -store_memory_free(png_const_structp pp, store_pool *pool, store_memory *memory) -{ - /* Note that pp may be NULL (see store_pool_delete below), the caller has - * found 'memory' in pool->list *and* unlinked this entry, so this is a valid - * pointer (for sure), but the contents may have been trashed. - */ - if (memory->pool != pool) - store_pool_error(pool->store, pp, "memory corrupted (pool)"); - - else if (memcmp(memory->mark, pool->mark, sizeof memory->mark) != 0) - store_pool_error(pool->store, pp, "memory corrupted (start)"); - - /* It should be safe to read the size field now. */ - else - { - png_alloc_size_t cb = memory->size; - - if (cb > pool->max) - store_pool_error(pool->store, pp, "memory corrupted (size)"); - - else if (memcmp((png_bytep)(memory+1)+cb, pool->mark, sizeof pool->mark) - != 0) - store_pool_error(pool->store, pp, "memory corrupted (end)"); - - /* Finally give the library a chance to find problems too: */ - else - { - pool->current -= cb; - free(memory); - } - } -} - -static void -store_pool_delete(png_store *ps, store_pool *pool) -{ - if (pool->list != NULL) - { - fprintf(stderr, "%s: %s %s: memory lost (list follows):\n", ps->test, - pool == &ps->read_memory_pool ? "read" : "write", - pool == &ps->read_memory_pool ? (ps->current != NULL ? - ps->current->name : "unknown file") : ps->wname); - ++ps->nerrors; - - do - { - store_memory *next = pool->list; - pool->list = next->next; - next->next = NULL; - - fprintf(stderr, "\t%lu bytes @ %p\n", - (unsigned long)next->size, (const void*)(next+1)); - /* The NULL means this will always return, even if the memory is - * corrupted. - */ - store_memory_free(NULL, pool, next); - } - while (pool->list != NULL); - } - - /* And reset the other fields too for the next time. */ - if (pool->max > pool->max_max) pool->max_max = pool->max; - pool->max = 0; - if (pool->current != 0) /* unexpected internal error */ - fprintf(stderr, "%s: %s %s: memory counter mismatch (internal error)\n", - ps->test, pool == &ps->read_memory_pool ? "read" : "write", - pool == &ps->read_memory_pool ? (ps->current != NULL ? - ps->current->name : "unknown file") : ps->wname); - pool->current = 0; - - if (pool->limit > pool->max_limit) - pool->max_limit = pool->limit; - - pool->limit = 0; - - if (pool->total > pool->max_total) - pool->max_total = pool->total; - - pool->total = 0; - - /* Get a new mark too. */ - store_pool_mark(pool->mark); -} - -/* The memory callbacks: */ -static png_voidp PNGCBAPI -store_malloc(png_structp ppIn, png_alloc_size_t cb) -{ - png_const_structp pp = ppIn; - store_pool *pool = voidcast(store_pool*, png_get_mem_ptr(pp)); - store_memory *new = voidcast(store_memory*, malloc(cb + (sizeof *new) + - (sizeof pool->mark))); - - if (new != NULL) - { - if (cb > pool->max) - pool->max = cb; - - pool->current += cb; - - if (pool->current > pool->limit) - pool->limit = pool->current; - - pool->total += cb; - - new->size = cb; - memcpy(new->mark, pool->mark, sizeof new->mark); - memcpy((png_byte*)(new+1) + cb, pool->mark, sizeof pool->mark); - new->pool = pool; - new->next = pool->list; - pool->list = new; - ++new; - } - - else - { - /* NOTE: the PNG user malloc function cannot use the png_ptr it is passed - * other than to retrieve the allocation pointer! libpng calls the - * store_malloc callback in two basic cases: - * - * 1) From png_malloc; png_malloc will do a png_error itself if NULL is - * returned. - * 2) From png_struct or png_info structure creation; png_malloc is - * to return so cleanup can be performed. - * - * To handle this store_malloc can log a message, but can't do anything - * else. - */ - store_log(pool->store, pp, "out of memory", 1 /* is_error */); - } - - return new; -} - -static void PNGCBAPI -store_free(png_structp ppIn, png_voidp memory) -{ - png_const_structp pp = ppIn; - store_pool *pool = voidcast(store_pool*, png_get_mem_ptr(pp)); - store_memory *this = voidcast(store_memory*, memory), **test; - - /* Because libpng calls store_free with a dummy png_struct when deleting - * png_struct or png_info via png_destroy_struct_2 it is necessary to check - * the passed in png_structp to ensure it is valid, and not pass it to - * png_error if it is not. - */ - if (pp != pool->store->pread && pp != pool->store->pwrite) - pp = NULL; - - /* First check that this 'memory' really is valid memory - it must be in the - * pool list. If it is, use the shared memory_free function to free it. - */ - --this; - for (test = &pool->list; *test != this; test = &(*test)->next) - { - if (*test == NULL) - { - store_pool_error(pool->store, pp, "bad pointer to free"); - return; - } - } - - /* Unlink this entry, *test == this. */ - *test = this->next; - this->next = NULL; - store_memory_free(pp, pool, this); -} -#endif /* PNG_USER_MEM_SUPPORTED */ - -/* Setup functions. */ -/* Cleanup when aborting a write or after storing the new file. */ -static void -store_write_reset(png_store *ps) -{ - if (ps->pwrite != NULL) - { - anon_context(ps); - - Try - png_destroy_write_struct(&ps->pwrite, &ps->piwrite); - - Catch_anonymous - { - /* memory corruption: continue. */ - } - - ps->pwrite = NULL; - ps->piwrite = NULL; - } - - /* And make sure that all the memory has been freed - this will output - * spurious errors in the case of memory corruption above, but this is safe. - */ -# ifdef PNG_USER_MEM_SUPPORTED - store_pool_delete(ps, &ps->write_memory_pool); -# endif - - store_freenew(ps); -} - -/* The following is the main write function, it returns a png_struct and, - * optionally, a png_info suitable for writiing a new PNG file. Use - * store_storefile above to record this file after it has been written. The - * returned libpng structures as destroyed by store_write_reset above. - */ -static png_structp -set_store_for_write(png_store *ps, png_infopp ppi, const char *name) -{ - anon_context(ps); - - Try - { - if (ps->pwrite != NULL) - png_error(ps->pwrite, "write store already in use"); - - store_write_reset(ps); - safecat(ps->wname, sizeof ps->wname, 0, name); - - /* Don't do the slow memory checks if doing a speed test, also if user - * memory is not supported we can't do it anyway. - */ -# ifdef PNG_USER_MEM_SUPPORTED - if (!ps->speed) - ps->pwrite = png_create_write_struct_2(PNG_LIBPNG_VER_STRING, - ps, store_error, store_warning, &ps->write_memory_pool, - store_malloc, store_free); - - else -# endif - ps->pwrite = png_create_write_struct(PNG_LIBPNG_VER_STRING, - ps, store_error, store_warning); - - png_set_write_fn(ps->pwrite, ps, store_write, store_flush); - -# ifdef PNG_SET_OPTION_SUPPORTED - { - int opt; - for (opt=0; optnoptions; ++opt) - if (png_set_option(ps->pwrite, ps->options[opt].option, - ps->options[opt].setting) == PNG_OPTION_INVALID) - png_error(ps->pwrite, "png option invalid"); - } -# endif - - if (ppi != NULL) - *ppi = ps->piwrite = png_create_info_struct(ps->pwrite); - } - - Catch_anonymous - return NULL; - - return ps->pwrite; -} - -/* Cleanup when finished reading (either due to error or in the success case). - * This routine exists even when there is no read support to make the code - * tidier (avoid a mass of ifdefs) and so easier to maintain. - */ -static void -store_read_reset(png_store *ps) -{ -# ifdef PNG_READ_SUPPORTED - if (ps->pread != NULL) - { - anon_context(ps); - - Try - png_destroy_read_struct(&ps->pread, &ps->piread, NULL); - - Catch_anonymous - { - /* error already output: continue */ - } - - ps->pread = NULL; - ps->piread = NULL; - } -# endif - -# ifdef PNG_USER_MEM_SUPPORTED - /* Always do this to be safe. */ - store_pool_delete(ps, &ps->read_memory_pool); -# endif - - ps->current = NULL; - ps->next = NULL; - ps->readpos = 0; - ps->validated = 0; - - ps->chunkpos = 8; - ps->chunktype = 0; - ps->chunklen = 16; - ps->IDAT_size = 0; -} - -#ifdef PNG_READ_SUPPORTED -static void -store_read_set(png_store *ps, png_uint_32 id) -{ - png_store_file *pf = ps->saved; - - while (pf != NULL) - { - if (pf->id == id) - { - ps->current = pf; - ps->next = NULL; - ps->IDAT_size = pf->IDAT_size; - ps->IDAT_bits = pf->IDAT_bits; /* just a cache */ - ps->IDAT_len = 0; - ps->IDAT_pos = 0; - ps->IDAT_crc = 0UL; - store_read_buffer_next(ps); - return; - } - - pf = pf->next; - } - - { - size_t pos; - char msg[FILE_NAME_SIZE+64]; - - pos = standard_name_from_id(msg, sizeof msg, 0, id); - pos = safecat(msg, sizeof msg, pos, ": file not found"); - png_error(ps->pread, msg); - } -} - -/* The main interface for reading a saved file - pass the id number of the file - * to retrieve. Ids must be unique or the earlier file will be hidden. The API - * returns a png_struct and, optionally, a png_info. Both of these will be - * destroyed by store_read_reset above. - */ -static png_structp -set_store_for_read(png_store *ps, png_infopp ppi, png_uint_32 id, - const char *name) -{ - /* Set the name for png_error */ - safecat(ps->test, sizeof ps->test, 0, name); - - if (ps->pread != NULL) - png_error(ps->pread, "read store already in use"); - - store_read_reset(ps); - - /* Both the create APIs can return NULL if used in their default mode - * (because there is no other way of handling an error because the jmp_buf - * by default is stored in png_struct and that has not been allocated!) - * However, given that store_error works correctly in these circumstances - * we don't ever expect NULL in this program. - */ -# ifdef PNG_USER_MEM_SUPPORTED - if (!ps->speed) - ps->pread = png_create_read_struct_2(PNG_LIBPNG_VER_STRING, ps, - store_error, store_warning, &ps->read_memory_pool, store_malloc, - store_free); - - else -# endif - ps->pread = png_create_read_struct(PNG_LIBPNG_VER_STRING, ps, store_error, - store_warning); - - if (ps->pread == NULL) - { - struct exception_context *the_exception_context = &ps->exception_context; - - store_log(ps, NULL, "png_create_read_struct returned NULL (unexpected)", - 1 /*error*/); - - Throw ps; - } - -# ifdef PNG_SET_OPTION_SUPPORTED - { - int opt; - for (opt=0; optnoptions; ++opt) - if (png_set_option(ps->pread, ps->options[opt].option, - ps->options[opt].setting) == PNG_OPTION_INVALID) - png_error(ps->pread, "png option invalid"); - } -# endif - - store_read_set(ps, id); - - if (ppi != NULL) - *ppi = ps->piread = png_create_info_struct(ps->pread); - - return ps->pread; -} -#endif /* PNG_READ_SUPPORTED */ - -/* The overall cleanup of a store simply calls the above then removes all the - * saved files. This does not delete the store itself. - */ -static void -store_delete(png_store *ps) -{ - store_write_reset(ps); - store_read_reset(ps); - store_freefile(&ps->saved); - store_image_free(ps, NULL); -} - -/*********************** PNG FILE MODIFICATION ON READ ************************/ -/* Files may be modified on read. The following structure contains a complete - * png_store together with extra members to handle modification and a special - * read callback for libpng. To use this the 'modifications' field must be set - * to a list of png_modification structures that actually perform the - * modification, otherwise a png_modifier is functionally equivalent to a - * png_store. There is a special read function, set_modifier_for_read, which - * replaces set_store_for_read. - */ -typedef enum modifier_state -{ - modifier_start, /* Initial value */ - modifier_signature, /* Have a signature */ - modifier_IHDR /* Have an IHDR */ -} modifier_state; - -typedef struct CIE_color -{ - /* A single CIE tristimulus value, representing the unique response of a - * standard observer to a variety of light spectra. The observer recognizes - * all spectra that produce this response as the same color, therefore this - * is effectively a description of a color. - */ - double X, Y, Z; -} CIE_color; - -typedef struct color_encoding -{ - /* A description of an (R,G,B) encoding of color (as defined above); this - * includes the actual colors of the (R,G,B) triples (1,0,0), (0,1,0) and - * (0,0,1) plus an encoding value that is used to encode the linear - * components R, G and B to give the actual values R^gamma, G^gamma and - * B^gamma that are stored. - */ - double gamma; /* Encoding (file) gamma of space */ - CIE_color red, green, blue; /* End points */ -} color_encoding; - -#ifdef PNG_READ_SUPPORTED -#if defined PNG_READ_TRANSFORMS_SUPPORTED && defined PNG_READ_cHRM_SUPPORTED -static double -chromaticity_x(CIE_color c) -{ - return c.X / (c.X + c.Y + c.Z); -} - -static double -chromaticity_y(CIE_color c) -{ - return c.Y / (c.X + c.Y + c.Z); -} - -static CIE_color -white_point(const color_encoding *encoding) -{ - CIE_color white; - - white.X = encoding->red.X + encoding->green.X + encoding->blue.X; - white.Y = encoding->red.Y + encoding->green.Y + encoding->blue.Y; - white.Z = encoding->red.Z + encoding->green.Z + encoding->blue.Z; - - return white; -} -#endif /* READ_TRANSFORMS && READ_cHRM */ - -#ifdef PNG_READ_RGB_TO_GRAY_SUPPORTED -static void -normalize_color_encoding(color_encoding *encoding) -{ - const double whiteY = encoding->red.Y + encoding->green.Y + - encoding->blue.Y; - - if (whiteY != 1) - { - encoding->red.X /= whiteY; - encoding->red.Y /= whiteY; - encoding->red.Z /= whiteY; - encoding->green.X /= whiteY; - encoding->green.Y /= whiteY; - encoding->green.Z /= whiteY; - encoding->blue.X /= whiteY; - encoding->blue.Y /= whiteY; - encoding->blue.Z /= whiteY; - } -} -#endif - -#ifdef PNG_READ_TRANSFORMS_SUPPORTED -static size_t -safecat_color_encoding(char *buffer, size_t bufsize, size_t pos, - const color_encoding *e, double encoding_gamma) -{ - if (e != 0) - { - if (encoding_gamma != 0) - pos = safecat(buffer, bufsize, pos, "("); - pos = safecat(buffer, bufsize, pos, "R("); - pos = safecatd(buffer, bufsize, pos, e->red.X, 4); - pos = safecat(buffer, bufsize, pos, ","); - pos = safecatd(buffer, bufsize, pos, e->red.Y, 4); - pos = safecat(buffer, bufsize, pos, ","); - pos = safecatd(buffer, bufsize, pos, e->red.Z, 4); - pos = safecat(buffer, bufsize, pos, "),G("); - pos = safecatd(buffer, bufsize, pos, e->green.X, 4); - pos = safecat(buffer, bufsize, pos, ","); - pos = safecatd(buffer, bufsize, pos, e->green.Y, 4); - pos = safecat(buffer, bufsize, pos, ","); - pos = safecatd(buffer, bufsize, pos, e->green.Z, 4); - pos = safecat(buffer, bufsize, pos, "),B("); - pos = safecatd(buffer, bufsize, pos, e->blue.X, 4); - pos = safecat(buffer, bufsize, pos, ","); - pos = safecatd(buffer, bufsize, pos, e->blue.Y, 4); - pos = safecat(buffer, bufsize, pos, ","); - pos = safecatd(buffer, bufsize, pos, e->blue.Z, 4); - pos = safecat(buffer, bufsize, pos, ")"); - if (encoding_gamma != 0) - pos = safecat(buffer, bufsize, pos, ")"); - } - - if (encoding_gamma != 0) - { - pos = safecat(buffer, bufsize, pos, "^"); - pos = safecatd(buffer, bufsize, pos, encoding_gamma, 5); - } - - return pos; -} -#endif /* READ_TRANSFORMS */ -#endif /* PNG_READ_SUPPORTED */ - -typedef struct png_modifier -{ - png_store this; /* I am a png_store */ - struct png_modification *modifications; /* Changes to make */ - - modifier_state state; /* My state */ - - /* Information from IHDR: */ - png_byte bit_depth; /* From IHDR */ - png_byte colour_type; /* From IHDR */ - - /* While handling PLTE, IDAT and IEND these chunks may be pended to allow - * other chunks to be inserted. - */ - png_uint_32 pending_len; - png_uint_32 pending_chunk; - - /* Test values */ - double *gammas; - unsigned int ngammas; - unsigned int ngamma_tests; /* Number of gamma tests to run*/ - double current_gamma; /* 0 if not set */ - const color_encoding *encodings; - unsigned int nencodings; - const color_encoding *current_encoding; /* If an encoding has been set */ - unsigned int encoding_counter; /* For iteration */ - int encoding_ignored; /* Something overwrote it */ - - /* Control variables used to iterate through possible encodings, the - * following must be set to 0 and tested by the function that uses the - * png_modifier because the modifier only sets it to 1 (true.) - */ - unsigned int repeat :1; /* Repeat this transform test. */ - unsigned int test_uses_encoding :1; - - /* Lowest sbit to test (pre-1.7 libpng fails for sbit < 8) */ - png_byte sbitlow; - - /* Error control - these are the limits on errors accepted by the gamma tests - * below. - */ - double maxout8; /* Maximum output value error */ - double maxabs8; /* Absolute sample error 0..1 */ - double maxcalc8; /* Absolute sample error 0..1 */ - double maxpc8; /* Percentage sample error 0..100% */ - double maxout16; /* Maximum output value error */ - double maxabs16; /* Absolute sample error 0..1 */ - double maxcalc16;/* Absolute sample error 0..1 */ - double maxcalcG; /* Absolute sample error 0..1 */ - double maxpc16; /* Percentage sample error 0..100% */ - - /* This is set by transforms that need to allow a higher limit, it is an - * internal check on pngvalid to ensure that the calculated error limits are - * not ridiculous; without this it is too easy to make a mistake in pngvalid - * that allows any value through. - * - * NOTE: this is not checked in release builds. - */ - double limit; /* limit on error values, normally 4E-3 */ - - /* Log limits - values above this are logged, but not necessarily - * warned. - */ - double log8; /* Absolute error in 8 bits to log */ - double log16; /* Absolute error in 16 bits to log */ - - /* Logged 8 and 16 bit errors ('output' values): */ - double error_gray_2; - double error_gray_4; - double error_gray_8; - double error_gray_16; - double error_color_8; - double error_color_16; - double error_indexed; - - /* Flags: */ - /* Whether to call png_read_update_info, not png_read_start_image, and how - * many times to call it. - */ - int use_update_info; - - /* Whether or not to interlace. */ - int interlace_type :9; /* int, but must store '1' */ - - /* Run the standard tests? */ - unsigned int test_standard :1; - - /* Run the odd-sized image and interlace read/write tests? */ - unsigned int test_size :1; - - /* Run tests on reading with a combination of transforms, */ - unsigned int test_transform :1; - unsigned int test_tRNS :1; /* Includes tRNS images */ - - /* When to use the use_input_precision option, this controls the gamma - * validation code checks. If set any value that is within the transformed - * range input-.5 to input+.5 will be accepted, otherwise the value must be - * within the normal limits. It should not be necessary to set this; the - * result should always be exact within the permitted error limits. - */ - unsigned int use_input_precision :1; - unsigned int use_input_precision_sbit :1; - unsigned int use_input_precision_16to8 :1; - - /* If set assume that the calculation bit depth is set by the input - * precision, not the output precision. - */ - unsigned int calculations_use_input_precision :1; - - /* If set assume that the calculations are done in 16 bits even if the sample - * depth is 8 bits. - */ - unsigned int assume_16_bit_calculations :1; - - /* Which gamma tests to run: */ - unsigned int test_gamma_threshold :1; - unsigned int test_gamma_transform :1; /* main tests */ - unsigned int test_gamma_sbit :1; - unsigned int test_gamma_scale16 :1; - unsigned int test_gamma_background :1; - unsigned int test_gamma_alpha_mode :1; - unsigned int test_gamma_expand16 :1; - unsigned int test_exhaustive :1; - - /* Whether or not to run the low-bit-depth grayscale tests. This fails on - * gamma images in some cases because of gross inaccuracies in the grayscale - * gamma handling for low bit depth. - */ - unsigned int test_lbg :1; - unsigned int test_lbg_gamma_threshold :1; - unsigned int test_lbg_gamma_transform :1; - unsigned int test_lbg_gamma_sbit :1; - unsigned int test_lbg_gamma_composition :1; - - unsigned int log :1; /* Log max error */ - - /* Buffer information, the buffer size limits the size of the chunks that can - * be modified - they must fit (including header and CRC) into the buffer! - */ - size_t flush; /* Count of bytes to flush */ - size_t buffer_count; /* Bytes in buffer */ - size_t buffer_position; /* Position in buffer */ - png_byte buffer[1024]; -} png_modifier; - -/* This returns true if the test should be stopped now because it has already - * failed and it is running silently. - */ -static int fail(png_modifier *pm) -{ - return !pm->log && !pm->this.verbose && (pm->this.nerrors > 0 || - (pm->this.treat_warnings_as_errors && pm->this.nwarnings > 0)); -} - -static void -modifier_init(png_modifier *pm) -{ - memset(pm, 0, sizeof *pm); - store_init(&pm->this); - pm->modifications = NULL; - pm->state = modifier_start; - pm->sbitlow = 1U; - pm->ngammas = 0; - pm->ngamma_tests = 0; - pm->gammas = 0; - pm->current_gamma = 0; - pm->encodings = 0; - pm->nencodings = 0; - pm->current_encoding = 0; - pm->encoding_counter = 0; - pm->encoding_ignored = 0; - pm->repeat = 0; - pm->test_uses_encoding = 0; - pm->maxout8 = pm->maxpc8 = pm->maxabs8 = pm->maxcalc8 = 0; - pm->maxout16 = pm->maxpc16 = pm->maxabs16 = pm->maxcalc16 = 0; - pm->maxcalcG = 0; - pm->limit = 4E-3; - pm->log8 = pm->log16 = 0; /* Means 'off' */ - pm->error_gray_2 = pm->error_gray_4 = pm->error_gray_8 = 0; - pm->error_gray_16 = pm->error_color_8 = pm->error_color_16 = 0; - pm->error_indexed = 0; - pm->use_update_info = 0; - pm->interlace_type = PNG_INTERLACE_NONE; - pm->test_standard = 0; - pm->test_size = 0; - pm->test_transform = 0; -# ifdef PNG_WRITE_tRNS_SUPPORTED - pm->test_tRNS = 1; -# else - pm->test_tRNS = 0; -# endif - pm->use_input_precision = 0; - pm->use_input_precision_sbit = 0; - pm->use_input_precision_16to8 = 0; - pm->calculations_use_input_precision = 0; - pm->assume_16_bit_calculations = 0; - pm->test_gamma_threshold = 0; - pm->test_gamma_transform = 0; - pm->test_gamma_sbit = 0; - pm->test_gamma_scale16 = 0; - pm->test_gamma_background = 0; - pm->test_gamma_alpha_mode = 0; - pm->test_gamma_expand16 = 0; - pm->test_lbg = 1; - pm->test_lbg_gamma_threshold = 1; - pm->test_lbg_gamma_transform = 1; - pm->test_lbg_gamma_sbit = 1; - pm->test_lbg_gamma_composition = 1; - pm->test_exhaustive = 0; - pm->log = 0; - - /* Rely on the memset for all the other fields - there are no pointers */ -} - -#ifdef PNG_READ_TRANSFORMS_SUPPORTED - -/* This controls use of checks that explicitly know how libpng digitizes the - * samples in calculations; setting this circumvents simple error limit checking - * in the rgb_to_gray check, replacing it with an exact copy of the libpng 1.5 - * algorithm. - */ -#define DIGITIZE PNG_LIBPNG_VER < 10700 - -/* If pm->calculations_use_input_precision is set then operations will happen - * with the precision of the input, not the precision of the output depth. - * - * If pm->assume_16_bit_calculations is set then even 8 bit calculations use 16 - * bit precision. This only affects those of the following limits that pertain - * to a calculation - not a digitization operation - unless the following API is - * called directly. - */ -#ifdef PNG_READ_RGB_TO_GRAY_SUPPORTED -#if DIGITIZE -static double digitize(double value, int depth, int do_round) -{ - /* 'value' is in the range 0 to 1, the result is the same value rounded to a - * multiple of the digitization factor - 8 or 16 bits depending on both the - * sample depth and the 'assume' setting. Digitization is normally by - * rounding and 'do_round' should be 1, if it is 0 the digitized value will - * be truncated. - */ - unsigned int digitization_factor = (1U << depth) - 1; - - /* Limiting the range is done as a convenience to the caller - it's easier to - * do it once here than every time at the call site. - */ - if (value <= 0) - value = 0; - - else if (value >= 1) - value = 1; - - value *= digitization_factor; - if (do_round) value += .5; - return floor(value)/digitization_factor; -} -#endif -#endif /* RGB_TO_GRAY */ - -#ifdef PNG_READ_GAMMA_SUPPORTED -static double abserr(const png_modifier *pm, int in_depth, int out_depth) -{ - /* Absolute error permitted in linear values - affected by the bit depth of - * the calculations. - */ - if (pm->assume_16_bit_calculations || - (pm->calculations_use_input_precision ? in_depth : out_depth) == 16) - return pm->maxabs16; - else - return pm->maxabs8; -} - -static double calcerr(const png_modifier *pm, int in_depth, int out_depth) -{ - /* Error in the linear composition arithmetic - only relevant when - * composition actually happens (0 < alpha < 1). - */ - if ((pm->calculations_use_input_precision ? in_depth : out_depth) == 16) - return pm->maxcalc16; - else if (pm->assume_16_bit_calculations) - return pm->maxcalcG; - else - return pm->maxcalc8; -} - -static double pcerr(const png_modifier *pm, int in_depth, int out_depth) -{ - /* Percentage error permitted in the linear values. Note that the specified - * value is a percentage but this routine returns a simple number. - */ - if (pm->assume_16_bit_calculations || - (pm->calculations_use_input_precision ? in_depth : out_depth) == 16) - return pm->maxpc16 * .01; - else - return pm->maxpc8 * .01; -} - -/* Output error - the error in the encoded value. This is determined by the - * digitization of the output so can be +/-0.5 in the actual output value. In - * the expand_16 case with the current code in libpng the expand happens after - * all the calculations are done in 8 bit arithmetic, so even though the output - * depth is 16 the output error is determined by the 8 bit calculation. - * - * This limit is not determined by the bit depth of internal calculations. - * - * The specified parameter does *not* include the base .5 digitization error but - * it is added here. - */ -static double outerr(const png_modifier *pm, int in_depth, int out_depth) -{ - /* There is a serious error in the 2 and 4 bit grayscale transform because - * the gamma table value (8 bits) is simply shifted, not rounded, so the - * error in 4 bit grayscale gamma is up to the value below. This is a hack - * to allow pngvalid to succeed: - * - * TODO: fix this in libpng - */ - if (out_depth == 2) - return .73182-.5; - - if (out_depth == 4) - return .90644-.5; - - if ((pm->calculations_use_input_precision ? in_depth : out_depth) == 16) - return pm->maxout16; - - /* This is the case where the value was calculated at 8-bit precision then - * scaled to 16 bits. - */ - else if (out_depth == 16) - return pm->maxout8 * 257; - - else - return pm->maxout8; -} - -/* This does the same thing as the above however it returns the value to log, - * rather than raising a warning. This is useful for debugging to track down - * exactly what set of parameters cause high error values. - */ -static double outlog(const png_modifier *pm, int in_depth, int out_depth) -{ - /* The command line parameters are either 8 bit (0..255) or 16 bit (0..65535) - * and so must be adjusted for low bit depth grayscale: - */ - if (out_depth <= 8) - { - if (pm->log8 == 0) /* switched off */ - return 256; - - if (out_depth < 8) - return pm->log8 / 255 * ((1<log8; - } - - if ((pm->calculations_use_input_precision ? in_depth : out_depth) == 16) - { - if (pm->log16 == 0) - return 65536; - - return pm->log16; - } - - /* This is the case where the value was calculated at 8-bit precision then - * scaled to 16 bits. - */ - if (pm->log8 == 0) - return 65536; - - return pm->log8 * 257; -} - -/* This complements the above by providing the appropriate quantization for the - * final value. Normally this would just be quantization to an integral value, - * but in the 8 bit calculation case it's actually quantization to a multiple of - * 257! - */ -static int output_quantization_factor(const png_modifier *pm, int in_depth, - int out_depth) -{ - if (out_depth == 16 && in_depth != 16 && - pm->calculations_use_input_precision) - return 257; - else - return 1; -} -#endif /* PNG_READ_GAMMA_SUPPORTED */ - -/* One modification structure must be provided for each chunk to be modified (in - * fact more than one can be provided if multiple separate changes are desired - * for a single chunk.) Modifications include adding a new chunk when a - * suitable chunk does not exist. - * - * The caller of modify_fn will reset the CRC of the chunk and record 'modified' - * or 'added' as appropriate if the modify_fn returns 1 (true). If the - * modify_fn is NULL the chunk is simply removed. - */ -typedef struct png_modification -{ - struct png_modification *next; - png_uint_32 chunk; - - /* If the following is NULL all matching chunks will be removed: */ - int (*modify_fn)(struct png_modifier *pm, - struct png_modification *me, int add); - - /* If the following is set to PLTE, IDAT or IEND and the chunk has not been - * found and modified (and there is a modify_fn) the modify_fn will be called - * to add the chunk before the relevant chunk. - */ - png_uint_32 add; - unsigned int modified :1; /* Chunk was modified */ - unsigned int added :1; /* Chunk was added */ - unsigned int removed :1; /* Chunk was removed */ -} png_modification; - -static void -modification_reset(png_modification *pmm) -{ - if (pmm != NULL) - { - pmm->modified = 0; - pmm->added = 0; - pmm->removed = 0; - modification_reset(pmm->next); - } -} - -static void -modification_init(png_modification *pmm) -{ - memset(pmm, 0, sizeof *pmm); - pmm->next = NULL; - pmm->chunk = 0; - pmm->modify_fn = NULL; - pmm->add = 0; - modification_reset(pmm); -} - -#ifdef PNG_READ_RGB_TO_GRAY_SUPPORTED -static void -modifier_current_encoding(const png_modifier *pm, color_encoding *ce) -{ - if (pm->current_encoding != 0) - *ce = *pm->current_encoding; - - else - memset(ce, 0, sizeof *ce); - - ce->gamma = pm->current_gamma; -} -#endif - -#ifdef PNG_READ_TRANSFORMS_SUPPORTED -static size_t -safecat_current_encoding(char *buffer, size_t bufsize, size_t pos, - const png_modifier *pm) -{ - pos = safecat_color_encoding(buffer, bufsize, pos, pm->current_encoding, - pm->current_gamma); - - if (pm->encoding_ignored) - pos = safecat(buffer, bufsize, pos, "[overridden]"); - - return pos; -} -#endif - -/* Iterate through the usefully testable color encodings. An encoding is one - * of: - * - * 1) Nothing (no color space, no gamma). - * 2) Just a gamma value from the gamma array (including 1.0) - * 3) A color space from the encodings array with the corresponding gamma. - * 4) The same, but with gamma 1.0 (only really useful with 16 bit calculations) - * - * The iterator selects these in turn, the randomizer selects one at random, - * which is used depends on the setting of the 'test_exhaustive' flag. Notice - * that this function changes the colour space encoding so it must only be - * called on completion of the previous test. This is what 'modifier_reset' - * does, below. - * - * After the function has been called the 'repeat' flag will still be set; the - * caller of modifier_reset must reset it at the start of each run of the test! - */ -static unsigned int -modifier_total_encodings(const png_modifier *pm) -{ - return 1 + /* (1) nothing */ - pm->ngammas + /* (2) gamma values to test */ - pm->nencodings + /* (3) total number of encodings */ - /* The following test only works after the first time through the - * png_modifier code because 'bit_depth' is set when the IHDR is read. - * modifier_reset, below, preserves the setting until after it has called - * the iterate function (also below.) - * - * For this reason do not rely on this function outside a call to - * modifier_reset. - */ - ((pm->bit_depth == 16 || pm->assume_16_bit_calculations) ? - pm->nencodings : 0); /* (4) encodings with gamma == 1.0 */ -} - -static void -modifier_encoding_iterate(png_modifier *pm) -{ - if (!pm->repeat && /* Else something needs the current encoding again. */ - pm->test_uses_encoding) /* Some transform is encoding dependent */ - { - if (pm->test_exhaustive) - { - if (++pm->encoding_counter >= modifier_total_encodings(pm)) - pm->encoding_counter = 0; /* This will stop the repeat */ - } - - else - { - /* Not exhaustive - choose an encoding at random; generate a number in - * the range 1..(max-1), so the result is always non-zero: - */ - if (pm->encoding_counter == 0) - pm->encoding_counter = random_mod(modifier_total_encodings(pm)-1)+1; - else - pm->encoding_counter = 0; - } - - if (pm->encoding_counter > 0) - pm->repeat = 1; - } - - else if (!pm->repeat) - pm->encoding_counter = 0; -} - -static void -modifier_reset(png_modifier *pm) -{ - store_read_reset(&pm->this); - pm->limit = 4E-3; - pm->pending_len = pm->pending_chunk = 0; - pm->flush = pm->buffer_count = pm->buffer_position = 0; - pm->modifications = NULL; - pm->state = modifier_start; - modifier_encoding_iterate(pm); - /* The following must be set in the next run. In particular - * test_uses_encodings must be set in the _ini function of each transform - * that looks at the encodings. (Not the 'add' function!) - */ - pm->test_uses_encoding = 0; - pm->current_gamma = 0; - pm->current_encoding = 0; - pm->encoding_ignored = 0; - /* These only become value after IHDR is read: */ - pm->bit_depth = pm->colour_type = 0; -} - -/* The following must be called before anything else to get the encoding set up - * on the modifier. In particular it must be called before the transform init - * functions are called. - */ -static void -modifier_set_encoding(png_modifier *pm) -{ - /* Set the encoding to the one specified by the current encoding counter, - * first clear out all the settings - this corresponds to an encoding_counter - * of 0. - */ - pm->current_gamma = 0; - pm->current_encoding = 0; - pm->encoding_ignored = 0; /* not ignored yet - happens in _ini functions. */ - - /* Now, if required, set the gamma and encoding fields. */ - if (pm->encoding_counter > 0) - { - /* The gammas[] array is an array of screen gammas, not encoding gammas, - * so we need the inverse: - */ - if (pm->encoding_counter <= pm->ngammas) - pm->current_gamma = 1/pm->gammas[pm->encoding_counter-1]; - - else - { - unsigned int i = pm->encoding_counter - pm->ngammas; - - if (i >= pm->nencodings) - { - i %= pm->nencodings; - pm->current_gamma = 1; /* Linear, only in the 16 bit case */ - } - - else - pm->current_gamma = pm->encodings[i].gamma; - - pm->current_encoding = pm->encodings + i; - } - } -} - -/* Enquiry functions to find out what is set. Notice that there is an implicit - * assumption below that the first encoding in the list is the one for sRGB. - */ -static int -modifier_color_encoding_is_sRGB(const png_modifier *pm) -{ - return pm->current_encoding != 0 && pm->current_encoding == pm->encodings && - pm->current_encoding->gamma == pm->current_gamma; -} - -static int -modifier_color_encoding_is_set(const png_modifier *pm) -{ - return pm->current_gamma != 0; -} - -/* The guts of modification are performed during a read. */ -static void -modifier_crc(png_bytep buffer) -{ - /* Recalculate the chunk CRC - a complete chunk must be in - * the buffer, at the start. - */ - uInt datalen = png_get_uint_32(buffer); - uLong crc = crc32(0, buffer+4, datalen+4); - /* The cast to png_uint_32 is safe because a crc32 is always a 32 bit value. - */ - png_save_uint_32(buffer+datalen+8, (png_uint_32)crc); -} - -static void -modifier_setbuffer(png_modifier *pm) -{ - modifier_crc(pm->buffer); - pm->buffer_count = png_get_uint_32(pm->buffer)+12; - pm->buffer_position = 0; -} - -/* Separate the callback into the actual implementation (which is passed the - * png_modifier explicitly) and the callback, which gets the modifier from the - * png_struct. - */ -static void -modifier_read_imp(png_modifier *pm, png_bytep pb, size_t st) -{ - while (st > 0) - { - size_t cb; - png_uint_32 len, chunk; - png_modification *mod; - - if (pm->buffer_position >= pm->buffer_count) switch (pm->state) - { - static png_byte sign[8] = { 137, 80, 78, 71, 13, 10, 26, 10 }; - case modifier_start: - store_read_chunk(&pm->this, pm->buffer, 8, 8); /* signature. */ - pm->buffer_count = 8; - pm->buffer_position = 0; - - if (memcmp(pm->buffer, sign, 8) != 0) - png_error(pm->this.pread, "invalid PNG file signature"); - pm->state = modifier_signature; - break; - - case modifier_signature: - store_read_chunk(&pm->this, pm->buffer, 13+12, 13+12); /* IHDR */ - pm->buffer_count = 13+12; - pm->buffer_position = 0; - - if (png_get_uint_32(pm->buffer) != 13 || - png_get_uint_32(pm->buffer+4) != CHUNK_IHDR) - png_error(pm->this.pread, "invalid IHDR"); - - /* Check the list of modifiers for modifications to the IHDR. */ - mod = pm->modifications; - while (mod != NULL) - { - if (mod->chunk == CHUNK_IHDR && mod->modify_fn && - (*mod->modify_fn)(pm, mod, 0)) - { - mod->modified = 1; - modifier_setbuffer(pm); - } - - /* Ignore removal or add if IHDR! */ - mod = mod->next; - } - - /* Cache information from the IHDR (the modified one.) */ - pm->bit_depth = pm->buffer[8+8]; - pm->colour_type = pm->buffer[8+8+1]; - - pm->state = modifier_IHDR; - pm->flush = 0; - break; - - case modifier_IHDR: - default: - /* Read a new chunk and process it until we see PLTE, IDAT or - * IEND. 'flush' indicates that there is still some data to - * output from the preceding chunk. - */ - if ((cb = pm->flush) > 0) - { - if (cb > st) cb = st; - pm->flush -= cb; - store_read_chunk(&pm->this, pb, cb, cb); - pb += cb; - st -= cb; - if (st == 0) return; - } - - /* No more bytes to flush, read a header, or handle a pending - * chunk. - */ - if (pm->pending_chunk != 0) - { - png_save_uint_32(pm->buffer, pm->pending_len); - png_save_uint_32(pm->buffer+4, pm->pending_chunk); - pm->pending_len = 0; - pm->pending_chunk = 0; - } - else - store_read_chunk(&pm->this, pm->buffer, 8, 8); - - pm->buffer_count = 8; - pm->buffer_position = 0; - - /* Check for something to modify or a terminator chunk. */ - len = png_get_uint_32(pm->buffer); - chunk = png_get_uint_32(pm->buffer+4); - - /* Terminators first, they may have to be delayed for added - * chunks - */ - if (chunk == CHUNK_PLTE || chunk == CHUNK_IDAT || - chunk == CHUNK_IEND) - { - mod = pm->modifications; - - while (mod != NULL) - { - if ((mod->add == chunk || - (mod->add == CHUNK_PLTE && chunk == CHUNK_IDAT)) && - mod->modify_fn != NULL && !mod->modified && !mod->added) - { - /* Regardless of what the modify function does do not run - * this again. - */ - mod->added = 1; - - if ((*mod->modify_fn)(pm, mod, 1 /*add*/)) - { - /* Reset the CRC on a new chunk */ - if (pm->buffer_count > 0) - modifier_setbuffer(pm); - - else - { - pm->buffer_position = 0; - mod->removed = 1; - } - - /* The buffer has been filled with something (we assume) - * so output this. Pend the current chunk. - */ - pm->pending_len = len; - pm->pending_chunk = chunk; - break; /* out of while */ - } - } - - mod = mod->next; - } - - /* Don't do any further processing if the buffer was modified - - * otherwise the code will end up modifying a chunk that was - * just added. - */ - if (mod != NULL) - break; /* out of switch */ - } - - /* If we get to here then this chunk may need to be modified. To - * do this it must be less than 1024 bytes in total size, otherwise - * it just gets flushed. - */ - if (len+12 <= sizeof pm->buffer) - { - size_t s = len+12-pm->buffer_count; - store_read_chunk(&pm->this, pm->buffer+pm->buffer_count, s, s); - pm->buffer_count = len+12; - - /* Check for a modification, else leave it be. */ - mod = pm->modifications; - while (mod != NULL) - { - if (mod->chunk == chunk) - { - if (mod->modify_fn == NULL) - { - /* Remove this chunk */ - pm->buffer_count = pm->buffer_position = 0; - mod->removed = 1; - break; /* Terminate the while loop */ - } - - else if ((*mod->modify_fn)(pm, mod, 0)) - { - mod->modified = 1; - /* The chunk may have been removed: */ - if (pm->buffer_count == 0) - { - pm->buffer_position = 0; - break; - } - modifier_setbuffer(pm); - } - } - - mod = mod->next; - } - } - - else - pm->flush = len+12 - pm->buffer_count; /* data + crc */ - - /* Take the data from the buffer (if there is any). */ - break; - } - - /* Here to read from the modifier buffer (not directly from - * the store, as in the flush case above.) - */ - cb = pm->buffer_count - pm->buffer_position; - - if (cb > st) - cb = st; - - memcpy(pb, pm->buffer + pm->buffer_position, cb); - st -= cb; - pb += cb; - pm->buffer_position += cb; - } -} - -/* The callback: */ -static void PNGCBAPI -modifier_read(png_structp ppIn, png_bytep pb, size_t st) -{ - png_const_structp pp = ppIn; - png_modifier *pm = voidcast(png_modifier*, png_get_io_ptr(pp)); - - if (pm == NULL || pm->this.pread != pp) - png_error(pp, "bad modifier_read call"); - - modifier_read_imp(pm, pb, st); -} - -/* Like store_progressive_read but the data is getting changed as we go so we - * need a local buffer. - */ -static void -modifier_progressive_read(png_modifier *pm, png_structp pp, png_infop pi) -{ - if (pm->this.pread != pp || pm->this.current == NULL || - pm->this.next == NULL) - png_error(pp, "store state damaged (progressive)"); - - /* This is another Horowitz and Hill random noise generator. In this case - * the aim is to stress the progressive reader with truly horrible variable - * buffer sizes in the range 1..500, so a sequence of 9 bit random numbers - * is generated. We could probably just count from 1 to 32767 and get as - * good a result. - */ - for (;;) - { - static png_uint_32 noise = 1; - size_t cb, cbAvail; - png_byte buffer[512]; - - /* Generate 15 more bits of stuff: */ - noise = (noise << 9) | ((noise ^ (noise >> (9-5))) & 0x1ff); - cb = noise & 0x1ff; - - /* Check that this number of bytes are available (in the current buffer.) - * (This doesn't quite work - the modifier might delete a chunk; unlikely - * but possible, it doesn't happen at present because the modifier only - * adds chunks to standard images.) - */ - cbAvail = store_read_buffer_avail(&pm->this); - if (pm->buffer_count > pm->buffer_position) - cbAvail += pm->buffer_count - pm->buffer_position; - - if (cb > cbAvail) - { - /* Check for EOF: */ - if (cbAvail == 0) - break; - - cb = cbAvail; - } - - modifier_read_imp(pm, buffer, cb); - png_process_data(pp, pi, buffer, cb); - } - - /* Check the invariants at the end (if this fails it's a problem in this - * file!) - */ - if (pm->buffer_count > pm->buffer_position || - pm->this.next != &pm->this.current->data || - pm->this.readpos < pm->this.current->datacount) - png_error(pp, "progressive read implementation error"); -} - -/* Set up a modifier. */ -static png_structp -set_modifier_for_read(png_modifier *pm, png_infopp ppi, png_uint_32 id, - const char *name) -{ - /* Do this first so that the modifier fields are cleared even if an error - * happens allocating the png_struct. No allocation is done here so no - * cleanup is required. - */ - pm->state = modifier_start; - pm->bit_depth = 0; - pm->colour_type = 255; - - pm->pending_len = 0; - pm->pending_chunk = 0; - pm->flush = 0; - pm->buffer_count = 0; - pm->buffer_position = 0; - - return set_store_for_read(&pm->this, ppi, id, name); -} - - -/******************************** MODIFICATIONS *******************************/ -/* Standard modifications to add chunks. These do not require the _SUPPORTED - * macros because the chunks can be there regardless of whether this specific - * libpng supports them. - */ -typedef struct gama_modification -{ - png_modification this; - png_fixed_point gamma; -} gama_modification; - -static int -gama_modify(png_modifier *pm, png_modification *me, int add) -{ - UNUSED(add) - /* This simply dumps the given gamma value into the buffer. */ - png_save_uint_32(pm->buffer, 4); - png_save_uint_32(pm->buffer+4, CHUNK_gAMA); - png_save_uint_32(pm->buffer+8, ((gama_modification*)me)->gamma); - return 1; -} - -static void -gama_modification_init(gama_modification *me, png_modifier *pm, double gammad) -{ - double g; - - modification_init(&me->this); - me->this.chunk = CHUNK_gAMA; - me->this.modify_fn = gama_modify; - me->this.add = CHUNK_PLTE; - g = fix(gammad); - me->gamma = (png_fixed_point)g; - me->this.next = pm->modifications; - pm->modifications = &me->this; -} - -typedef struct chrm_modification -{ - png_modification this; - const color_encoding *encoding; - png_fixed_point wx, wy, rx, ry, gx, gy, bx, by; -} chrm_modification; - -static int -chrm_modify(png_modifier *pm, png_modification *me, int add) -{ - UNUSED(add) - /* As with gAMA this just adds the required cHRM chunk to the buffer. */ - png_save_uint_32(pm->buffer , 32); - png_save_uint_32(pm->buffer+ 4, CHUNK_cHRM); - png_save_uint_32(pm->buffer+ 8, ((chrm_modification*)me)->wx); - png_save_uint_32(pm->buffer+12, ((chrm_modification*)me)->wy); - png_save_uint_32(pm->buffer+16, ((chrm_modification*)me)->rx); - png_save_uint_32(pm->buffer+20, ((chrm_modification*)me)->ry); - png_save_uint_32(pm->buffer+24, ((chrm_modification*)me)->gx); - png_save_uint_32(pm->buffer+28, ((chrm_modification*)me)->gy); - png_save_uint_32(pm->buffer+32, ((chrm_modification*)me)->bx); - png_save_uint_32(pm->buffer+36, ((chrm_modification*)me)->by); - return 1; -} - -static void -chrm_modification_init(chrm_modification *me, png_modifier *pm, - const color_encoding *encoding) -{ - CIE_color white = white_point(encoding); - - /* Original end points: */ - me->encoding = encoding; - - /* Chromaticities (in fixed point): */ - me->wx = fix(chromaticity_x(white)); - me->wy = fix(chromaticity_y(white)); - - me->rx = fix(chromaticity_x(encoding->red)); - me->ry = fix(chromaticity_y(encoding->red)); - me->gx = fix(chromaticity_x(encoding->green)); - me->gy = fix(chromaticity_y(encoding->green)); - me->bx = fix(chromaticity_x(encoding->blue)); - me->by = fix(chromaticity_y(encoding->blue)); - - modification_init(&me->this); - me->this.chunk = CHUNK_cHRM; - me->this.modify_fn = chrm_modify; - me->this.add = CHUNK_PLTE; - me->this.next = pm->modifications; - pm->modifications = &me->this; -} - -typedef struct srgb_modification -{ - png_modification this; - png_byte intent; -} srgb_modification; - -static int -srgb_modify(png_modifier *pm, png_modification *me, int add) -{ - UNUSED(add) - /* As above, ignore add and just make a new chunk */ - png_save_uint_32(pm->buffer, 1); - png_save_uint_32(pm->buffer+4, CHUNK_sRGB); - pm->buffer[8] = ((srgb_modification*)me)->intent; - return 1; -} - -static void -srgb_modification_init(srgb_modification *me, png_modifier *pm, png_byte intent) -{ - modification_init(&me->this); - me->this.chunk = CHUNK_sBIT; - - if (intent <= 3) /* if valid, else *delete* sRGB chunks */ - { - me->this.modify_fn = srgb_modify; - me->this.add = CHUNK_PLTE; - me->intent = intent; - } - - else - { - me->this.modify_fn = 0; - me->this.add = 0; - me->intent = 0; - } - - me->this.next = pm->modifications; - pm->modifications = &me->this; -} - -#ifdef PNG_READ_GAMMA_SUPPORTED -typedef struct sbit_modification -{ - png_modification this; - png_byte sbit; -} sbit_modification; - -static int -sbit_modify(png_modifier *pm, png_modification *me, int add) -{ - png_byte sbit = ((sbit_modification*)me)->sbit; - if (pm->bit_depth > sbit) - { - int cb = 0; - switch (pm->colour_type) - { - case 0: - cb = 1; - break; - - case 2: - case 3: - cb = 3; - break; - - case 4: - cb = 2; - break; - - case 6: - cb = 4; - break; - - default: - png_error(pm->this.pread, - "unexpected colour type in sBIT modification"); - } - - png_save_uint_32(pm->buffer, cb); - png_save_uint_32(pm->buffer+4, CHUNK_sBIT); - - while (cb > 0) - (pm->buffer+8)[--cb] = sbit; - - return 1; - } - else if (!add) - { - /* Remove the sBIT chunk */ - pm->buffer_count = pm->buffer_position = 0; - return 1; - } - else - return 0; /* do nothing */ -} - -static void -sbit_modification_init(sbit_modification *me, png_modifier *pm, png_byte sbit) -{ - modification_init(&me->this); - me->this.chunk = CHUNK_sBIT; - me->this.modify_fn = sbit_modify; - me->this.add = CHUNK_PLTE; - me->sbit = sbit; - me->this.next = pm->modifications; - pm->modifications = &me->this; -} -#endif /* PNG_READ_GAMMA_SUPPORTED */ -#endif /* PNG_READ_TRANSFORMS_SUPPORTED */ - -/***************************** STANDARD PNG FILES *****************************/ -/* Standard files - write and save standard files. */ -/* There are two basic forms of standard images. Those which attempt to have - * all the possible pixel values (not possible for 16bpp images, but a range of - * values are produced) and those which have a range of image sizes. The former - * are used for testing transforms, in particular gamma correction and bit - * reduction and increase. The latter are reserved for testing the behavior of - * libpng with respect to 'odd' image sizes - particularly small images where - * rows become 1 byte and interlace passes disappear. - * - * The first, most useful, set are the 'transform' images, the second set of - * small images are the 'size' images. - * - * The transform files are constructed with rows which fit into a 1024 byte row - * buffer. This makes allocation easier below. Further regardless of the file - * format every row has 128 pixels (giving 1024 bytes for 64bpp formats). - * - * Files are stored with no gAMA or sBIT chunks, with a PLTE only when needed - * and with an ID derived from the colour type, bit depth and interlace type - * as above (FILEID). The width (128) and height (variable) are not stored in - * the FILEID - instead the fields are set to 0, indicating a transform file. - * - * The size files ar constructed with rows a maximum of 128 bytes wide, allowing - * a maximum width of 16 pixels (for the 64bpp case.) They also have a maximum - * height of 16 rows. The width and height are stored in the FILEID and, being - * non-zero, indicate a size file. - * - * Because the PNG filter code is typically the largest CPU consumer within - * libpng itself there is a tendency to attempt to optimize it. This results in - * special case code which needs to be validated. To cause this to happen the - * 'size' images are made to use each possible filter, in so far as this is - * possible for smaller images. - * - * For palette image (colour type 3) multiple transform images are stored with - * the same bit depth to allow testing of more colour combinations - - * particularly important for testing the gamma code because libpng uses a - * different code path for palette images. For size images a single palette is - * used. - */ - -/* Make a 'standard' palette. Because there are only 256 entries in a palette - * (maximum) this actually makes a random palette in the hope that enough tests - * will catch enough errors. (Note that the same palette isn't produced every - * time for the same test - it depends on what previous tests have been run - - * but a given set of arguments to pngvalid will always produce the same palette - * at the same test! This is why pseudo-random number generators are useful for - * testing.) - * - * The store must be open for write when this is called, otherwise an internal - * error will occur. This routine contains its own magic number seed, so the - * palettes generated don't change if there are intervening errors (changing the - * calls to the store_mark seed.) - */ -static store_palette_entry * -make_standard_palette(png_store* ps, int npalette, int do_tRNS) -{ - static png_uint_32 palette_seed[2] = { 0x87654321, 9 }; - - int i = 0; - png_byte values[256][4]; - - /* Always put in black and white plus the six primary and secondary colors. - */ - for (; i<8; ++i) - { - values[i][1] = (png_byte)((i&1) ? 255U : 0U); - values[i][2] = (png_byte)((i&2) ? 255U : 0U); - values[i][3] = (png_byte)((i&4) ? 255U : 0U); - } - - /* Then add 62 grays (one quarter of the remaining 256 slots). */ - { - int j = 0; - png_byte random_bytes[4]; - png_byte need[256]; - - need[0] = 0; /*got black*/ - memset(need+1, 1, (sizeof need)-2); /*need these*/ - need[255] = 0; /*but not white*/ - - while (i<70) - { - png_byte b; - - if (j==0) - { - make_four_random_bytes(palette_seed, random_bytes); - j = 4; - } - - b = random_bytes[--j]; - if (need[b]) - { - values[i][1] = b; - values[i][2] = b; - values[i++][3] = b; - } - } - } - - /* Finally add 192 colors at random - don't worry about matches to things we - * already have, chance is less than 1/65536. Don't worry about grays, - * chance is the same, so we get a duplicate or extra gray less than 1 time - * in 170. - */ - for (; i<256; ++i) - make_four_random_bytes(palette_seed, values[i]); - - /* Fill in the alpha values in the first byte. Just use all possible values - * (0..255) in an apparently random order: - */ - { - store_palette_entry *palette; - png_byte selector[4]; - - make_four_random_bytes(palette_seed, selector); - - if (do_tRNS) - for (i=0; i<256; ++i) - values[i][0] = (png_byte)(i ^ selector[0]); - - else - for (i=0; i<256; ++i) - values[i][0] = 255; /* no transparency/tRNS chunk */ - - /* 'values' contains 256 ARGB values, but we only need 'npalette'. - * 'npalette' will always be a power of 2: 2, 4, 16 or 256. In the low - * bit depth cases select colors at random, else it is difficult to have - * a set of low bit depth palette test with any chance of a reasonable - * range of colors. Do this by randomly permuting values into the low - * 'npalette' entries using an XOR mask generated here. This also - * permutes the npalette == 256 case in a potentially useful way (there is - * no relationship between palette index and the color value therein!) - */ - palette = store_write_palette(ps, npalette); - - for (i=0; i 0) - png_set_tRNS(pp, pi, tRNS, j, 0/*color*/); -#endif - } -} - -#ifdef PNG_WRITE_tRNS_SUPPORTED -static void -set_random_tRNS(png_structp pp, png_infop pi, png_byte colour_type, - int bit_depth) -{ - /* To make this useful the tRNS color needs to match at least one pixel. - * Random values are fine for gray, including the 16-bit case where we know - * that the test image contains all the gray values. For RGB we need more - * method as only 65536 different RGB values are generated. - */ - png_color_16 tRNS; - png_uint_16 mask = (png_uint_16)((1U << bit_depth)-1); - - R8(tRNS); /* makes unset fields random */ - - if (colour_type & 2/*RGB*/) - { - if (bit_depth == 8) - { - tRNS.red = random_u16(); - tRNS.green = random_u16(); - tRNS.blue = tRNS.red ^ tRNS.green; - tRNS.red &= mask; - tRNS.green &= mask; - tRNS.blue &= mask; - } - - else /* bit_depth == 16 */ - { - tRNS.red = random_u16(); - tRNS.green = (png_uint_16)(tRNS.red * 257); - tRNS.blue = (png_uint_16)(tRNS.green * 17); - } - } - - else - { - tRNS.gray = random_u16(); - tRNS.gray &= mask; - } - - png_set_tRNS(pp, pi, NULL, 0, &tRNS); -} -#endif - -/* The number of passes is related to the interlace type. There was no libpng - * API to determine this prior to 1.5, so we need an inquiry function: - */ -static int -npasses_from_interlace_type(png_const_structp pp, int interlace_type) -{ - switch (interlace_type) - { - default: - png_error(pp, "invalid interlace type"); - - case PNG_INTERLACE_NONE: - return 1; - - case PNG_INTERLACE_ADAM7: - return PNG_INTERLACE_ADAM7_PASSES; - } -} - -static unsigned int -bit_size(png_const_structp pp, png_byte colour_type, png_byte bit_depth) -{ - switch (colour_type) - { - default: png_error(pp, "invalid color type"); - - case 0: return bit_depth; - - case 2: return 3*bit_depth; - - case 3: return bit_depth; - - case 4: return 2*bit_depth; - - case 6: return 4*bit_depth; - } -} - -#define TRANSFORM_WIDTH 128U -#define TRANSFORM_ROWMAX (TRANSFORM_WIDTH*8U) -#define SIZE_ROWMAX (16*8U) /* 16 pixels, max 8 bytes each - 128 bytes */ -#define STANDARD_ROWMAX TRANSFORM_ROWMAX /* The larger of the two */ -#define SIZE_HEIGHTMAX 16 /* Maximum range of size images */ - -static size_t -transform_rowsize(png_const_structp pp, png_byte colour_type, - png_byte bit_depth) -{ - return (TRANSFORM_WIDTH * bit_size(pp, colour_type, bit_depth)) / 8; -} - -/* transform_width(pp, colour_type, bit_depth) current returns the same number - * every time, so just use a macro: - */ -#define transform_width(pp, colour_type, bit_depth) TRANSFORM_WIDTH - -static png_uint_32 -transform_height(png_const_structp pp, png_byte colour_type, png_byte bit_depth) -{ - switch (bit_size(pp, colour_type, bit_depth)) - { - case 1: - case 2: - case 4: - return 1; /* Total of 128 pixels */ - - case 8: - return 2; /* Total of 256 pixels/bytes */ - - case 16: - return 512; /* Total of 65536 pixels */ - - case 24: - case 32: - return 512; /* 65536 pixels */ - - case 48: - case 64: - return 2048;/* 4 x 65536 pixels. */ -# define TRANSFORM_HEIGHTMAX 2048 - - default: - return 0; /* Error, will be caught later */ - } -} - -#ifdef PNG_READ_SUPPORTED -/* The following can only be defined here, now we have the definitions - * of the transform image sizes. - */ -static png_uint_32 -standard_width(png_const_structp pp, png_uint_32 id) -{ - png_uint_32 width = WIDTH_FROM_ID(id); - UNUSED(pp) - - if (width == 0) - width = transform_width(pp, COL_FROM_ID(id), DEPTH_FROM_ID(id)); - - return width; -} - -static png_uint_32 -standard_height(png_const_structp pp, png_uint_32 id) -{ - png_uint_32 height = HEIGHT_FROM_ID(id); - - if (height == 0) - height = transform_height(pp, COL_FROM_ID(id), DEPTH_FROM_ID(id)); - - return height; -} - -static png_uint_32 -standard_rowsize(png_const_structp pp, png_uint_32 id) -{ - png_uint_32 width = standard_width(pp, id); - - /* This won't overflow: */ - width *= bit_size(pp, COL_FROM_ID(id), DEPTH_FROM_ID(id)); - return (width + 7) / 8; -} -#endif /* PNG_READ_SUPPORTED */ - -static void -transform_row(png_const_structp pp, png_byte buffer[TRANSFORM_ROWMAX], - png_byte colour_type, png_byte bit_depth, png_uint_32 y) -{ - png_uint_32 v = y << 7; - png_uint_32 i = 0; - - switch (bit_size(pp, colour_type, bit_depth)) - { - case 1: - while (i<128/8) buffer[i] = (png_byte)(v & 0xff), v += 17, ++i; - return; - - case 2: - while (i<128/4) buffer[i] = (png_byte)(v & 0xff), v += 33, ++i; - return; - - case 4: - while (i<128/2) buffer[i] = (png_byte)(v & 0xff), v += 65, ++i; - return; - - case 8: - /* 256 bytes total, 128 bytes in each row set as follows: */ - while (i<128) buffer[i] = (png_byte)(v & 0xff), ++v, ++i; - return; - - case 16: - /* Generate all 65536 pixel values in order, which includes the 8 bit - * GA case as well as the 16 bit G case. - */ - while (i<128) - { - buffer[2*i] = (png_byte)((v>>8) & 0xff); - buffer[2*i+1] = (png_byte)(v & 0xff); - ++v; - ++i; - } - - return; - - case 24: - /* 65535 pixels, but rotate the values. */ - while (i<128) - { - /* Three bytes per pixel, r, g, b, make b by r^g */ - buffer[3*i+0] = (png_byte)((v >> 8) & 0xff); - buffer[3*i+1] = (png_byte)(v & 0xff); - buffer[3*i+2] = (png_byte)(((v >> 8) ^ v) & 0xff); - ++v; - ++i; - } - - return; - - case 32: - /* 65535 pixels, r, g, b, a; just replicate */ - while (i<128) - { - buffer[4*i+0] = (png_byte)((v >> 8) & 0xff); - buffer[4*i+1] = (png_byte)(v & 0xff); - buffer[4*i+2] = (png_byte)((v >> 8) & 0xff); - buffer[4*i+3] = (png_byte)(v & 0xff); - ++v; - ++i; - } - - return; - - case 48: - /* y is maximum 2047, giving 4x65536 pixels, make 'r' increase by 1 at - * each pixel, g increase by 257 (0x101) and 'b' by 0x1111: - */ - while (i<128) - { - png_uint_32 t = v++; - buffer[6*i+0] = (png_byte)((t >> 8) & 0xff); - buffer[6*i+1] = (png_byte)(t & 0xff); - t *= 257; - buffer[6*i+2] = (png_byte)((t >> 8) & 0xff); - buffer[6*i+3] = (png_byte)(t & 0xff); - t *= 17; - buffer[6*i+4] = (png_byte)((t >> 8) & 0xff); - buffer[6*i+5] = (png_byte)(t & 0xff); - ++i; - } - - return; - - case 64: - /* As above in the 32 bit case. */ - while (i<128) - { - png_uint_32 t = v++; - buffer[8*i+0] = (png_byte)((t >> 8) & 0xff); - buffer[8*i+1] = (png_byte)(t & 0xff); - buffer[8*i+4] = (png_byte)((t >> 8) & 0xff); - buffer[8*i+5] = (png_byte)(t & 0xff); - t *= 257; - buffer[8*i+2] = (png_byte)((t >> 8) & 0xff); - buffer[8*i+3] = (png_byte)(t & 0xff); - buffer[8*i+6] = (png_byte)((t >> 8) & 0xff); - buffer[8*i+7] = (png_byte)(t & 0xff); - ++i; - } - return; - - default: - break; - } - - png_error(pp, "internal error"); -} - -/* This is just to do the right cast - could be changed to a function to check - * 'bd' but there isn't much point. - */ -#define DEPTH(bd) ((png_byte)(1U << (bd))) - -/* This is just a helper for compiling on minimal systems with no write - * interlacing support. If there is no write interlacing we can't generate test - * cases with interlace: - */ -#ifdef PNG_WRITE_INTERLACING_SUPPORTED -# define INTERLACE_LAST PNG_INTERLACE_LAST -# define check_interlace_type(type) ((void)(type)) -# define set_write_interlace_handling(pp,type) png_set_interlace_handling(pp) -# define do_own_interlace 0 -#elif PNG_LIBPNG_VER < 10700 -# define set_write_interlace_handling(pp,type) (1) -static void -check_interlace_type(int const interlace_type) -{ - /* Prior to 1.7.0 libpng does not support the write of an interlaced image - * unless PNG_WRITE_INTERLACING_SUPPORTED, even with do_interlace so the - * code here does the pixel interlace itself, so: - */ - if (interlace_type != PNG_INTERLACE_NONE) - { - /* This is an internal error - --interlace tests should be skipped, not - * attempted. - */ - fprintf(stderr, "pngvalid: no interlace support\n"); - exit(99); - } -} -# define INTERLACE_LAST (PNG_INTERLACE_NONE+1) -# define do_own_interlace 0 -#else /* libpng 1.7+ */ -# define set_write_interlace_handling(pp,type)\ - npasses_from_interlace_type(pp,type) -# define check_interlace_type(type) ((void)(type)) -# define INTERLACE_LAST PNG_INTERLACE_LAST -# define do_own_interlace 1 -#endif /* WRITE_INTERLACING tests */ - -#if PNG_LIBPNG_VER >= 10700 || defined PNG_WRITE_INTERLACING_SUPPORTED -# define CAN_WRITE_INTERLACE 1 -#else -# define CAN_WRITE_INTERLACE 0 -#endif - -/* Do the same thing for read interlacing; this controls whether read tests do - * their own de-interlace or use libpng. - */ -#ifdef PNG_READ_INTERLACING_SUPPORTED -# define do_read_interlace 0 -#else /* no libpng read interlace support */ -# define do_read_interlace 1 -#endif -/* The following two routines use the PNG interlace support macros from - * png.h to interlace or deinterlace rows. - */ -static void -interlace_row(png_bytep buffer, png_const_bytep imageRow, - unsigned int pixel_size, png_uint_32 w, int pass, int littleendian) -{ - png_uint_32 xin, xout, xstep; - - /* Note that this can, trivially, be optimized to a memcpy on pass 7, the - * code is presented this way to make it easier to understand. In practice - * consult the code in the libpng source to see other ways of doing this. - * - * It is OK for buffer and imageRow to be identical, because 'xin' moves - * faster than 'xout' and we copy up. - */ - xin = PNG_PASS_START_COL(pass); - xstep = 1U<wname); - text.text = copy; - text.text_length = pos; - text.itxt_length = 0; - text.lang = 0; - text.lang_key = 0; - - png_set_text(pp, pi, &text, 1); - } -#endif - - if (colour_type == 3) /* palette */ - init_standard_palette(ps, pp, pi, 1U << bit_depth, 1/*do tRNS*/); - -# ifdef PNG_WRITE_tRNS_SUPPORTED - else if (palette_number) - set_random_tRNS(pp, pi, colour_type, bit_depth); -# endif - - png_write_info(pp, pi); - - if (png_get_rowbytes(pp, pi) != - transform_rowsize(pp, colour_type, bit_depth)) - png_error(pp, "transform row size incorrect"); - - else - { - /* Somewhat confusingly this must be called *after* png_write_info - * because if it is called before, the information in *pp has not been - * updated to reflect the interlaced image. - */ - int npasses = set_write_interlace_handling(pp, interlace_type); - int pass; - - if (npasses != npasses_from_interlace_type(pp, interlace_type)) - png_error(pp, "write: png_set_interlace_handling failed"); - - for (pass=0; pass 0) - interlace_row(buffer, buffer, - bit_size(pp, colour_type, bit_depth), w, pass, - 0/*data always bigendian*/); - else - continue; - } -# endif /* do_own_interlace */ - - choose_random_filter(pp, pass == 0 && y == 0); - png_write_row(pp, buffer); - } - } - } - -#ifdef PNG_TEXT_SUPPORTED - { - static char key[] = "end marker"; - static char comment[] = "end"; - png_text text; - - /* Use a compressed text string to test the correct interaction of text - * compression and IDAT compression. - */ - text.compression = TEXT_COMPRESSION; - text.key = key; - text.text = comment; - text.text_length = (sizeof comment)-1; - text.itxt_length = 0; - text.lang = 0; - text.lang_key = 0; - - png_set_text(pp, pi, &text, 1); - } -#endif - - png_write_end(pp, pi); - - /* And store this under the appropriate id, then clean up. */ - store_storefile(ps, FILEID(colour_type, bit_depth, palette_number, - interlace_type, 0, 0, 0)); - - store_write_reset(ps); - } - - Catch(fault) - { - /* Use the png_store returned by the exception. This may help the compiler - * because 'ps' is not used in this branch of the setjmp. Note that fault - * and ps will always be the same value. - */ - store_write_reset(fault); - } -} - -static void -make_transform_images(png_modifier *pm) -{ - png_byte colour_type = 0; - png_byte bit_depth = 0; - unsigned int palette_number = 0; - - /* This is in case of errors. */ - safecat(pm->this.test, sizeof pm->this.test, 0, "make standard images"); - - /* Use next_format to enumerate all the combinations we test, including - * generating multiple low bit depth palette images. Non-A images (palette - * and direct) are created with and without tRNS chunks. - */ - while (next_format(&colour_type, &bit_depth, &palette_number, 1, 1)) - { - int interlace_type; - - for (interlace_type = PNG_INTERLACE_NONE; - interlace_type < INTERLACE_LAST; ++interlace_type) - { - char name[FILE_NAME_SIZE]; - - standard_name(name, sizeof name, 0, colour_type, bit_depth, - palette_number, interlace_type, 0, 0, do_own_interlace); - make_transform_image(&pm->this, colour_type, bit_depth, palette_number, - interlace_type, name); - } - } -} - -/* Build a single row for the 'size' test images; this fills in only the - * first bit_width bits of the sample row. - */ -static void -size_row(png_byte buffer[SIZE_ROWMAX], png_uint_32 bit_width, png_uint_32 y) -{ - /* height is in the range 1 to 16, so: */ - y = ((y & 1) << 7) + ((y & 2) << 6) + ((y & 4) << 5) + ((y & 8) << 4); - /* the following ensures bits are set in small images: */ - y ^= 0xA5; - - while (bit_width >= 8) - *buffer++ = (png_byte)y++, bit_width -= 8; - - /* There may be up to 7 remaining bits, these go in the most significant - * bits of the byte. - */ - if (bit_width > 0) - { - png_uint_32 mask = (1U<<(8-bit_width))-1; - *buffer = (png_byte)((*buffer & mask) | (y & ~mask)); - } -} - -static void -make_size_image(png_store* const ps, png_byte const colour_type, - png_byte const bit_depth, int const interlace_type, - png_uint_32 const w, png_uint_32 const h, - int const do_interlace) -{ - context(ps, fault); - - check_interlace_type(interlace_type); - - Try - { - png_infop pi; - png_structp pp; - unsigned int pixel_size; - - /* Make a name and get an appropriate id for the store: */ - char name[FILE_NAME_SIZE]; - png_uint_32 id = FILEID(colour_type, bit_depth, 0/*palette*/, - interlace_type, w, h, do_interlace); - - standard_name_from_id(name, sizeof name, 0, id); - pp = set_store_for_write(ps, &pi, name); - - /* In the event of a problem return control to the Catch statement below - * to do the clean up - it is not possible to 'return' directly from a Try - * block. - */ - if (pp == NULL) - Throw ps; - - png_set_IHDR(pp, pi, w, h, bit_depth, colour_type, interlace_type, - PNG_COMPRESSION_TYPE_BASE, PNG_FILTER_TYPE_BASE); - -#ifdef PNG_TEXT_SUPPORTED - { - static char key[] = "image name"; /* must be writeable */ - size_t pos; - png_text text; - char copy[FILE_NAME_SIZE]; - - /* Use a compressed text string to test the correct interaction of text - * compression and IDAT compression. - */ - text.compression = TEXT_COMPRESSION; - text.key = key; - /* Yuck: the text must be writable! */ - pos = safecat(copy, sizeof copy, 0, ps->wname); - text.text = copy; - text.text_length = pos; - text.itxt_length = 0; - text.lang = 0; - text.lang_key = 0; - - png_set_text(pp, pi, &text, 1); - } -#endif - - if (colour_type == 3) /* palette */ - init_standard_palette(ps, pp, pi, 1U << bit_depth, 0/*do tRNS*/); - - png_write_info(pp, pi); - - /* Calculate the bit size, divide by 8 to get the byte size - this won't - * overflow because we know the w values are all small enough even for - * a system where 'unsigned int' is only 16 bits. - */ - pixel_size = bit_size(pp, colour_type, bit_depth); - if (png_get_rowbytes(pp, pi) != ((w * pixel_size) + 7) / 8) - png_error(pp, "size row size incorrect"); - - else - { - int npasses = npasses_from_interlace_type(pp, interlace_type); - png_uint_32 y; - int pass; - png_byte image[16][SIZE_ROWMAX]; - - /* To help consistent error detection make the parts of this buffer - * that aren't set below all '1': - */ - memset(image, 0xff, sizeof image); - - if (!do_interlace && - npasses != set_write_interlace_handling(pp, interlace_type)) - png_error(pp, "write: png_set_interlace_handling failed"); - - /* Prepare the whole image first to avoid making it 7 times: */ - for (y=0; y 0) - { - /* Set to all 1's for error detection (libpng tends to - * set unset things to 0). - */ - memset(tempRow, 0xff, sizeof tempRow); - interlace_row(tempRow, row, pixel_size, w, pass, - 0/*data always bigendian*/); - row = tempRow; - } - else - continue; - } - -# ifdef PNG_WRITE_FILTER_SUPPORTED - /* Only get to here if the row has some pixels in it, set the - * filters to 'all' for the very first row and thereafter to a - * single filter. It isn't well documented, but png_set_filter - * does accept a filter number (per the spec) as well as a bit - * mask. - * - * The code now uses filters at random, except that on the first - * row of an image it ensures that a previous row filter is in - * the set so that libpng allocates the row buffer. - */ - { - int filters = 8 << random_mod(PNG_FILTER_VALUE_LAST); - - if (pass == 0 && y == 0 && - (filters < PNG_FILTER_UP || w == 1U)) - filters |= PNG_FILTER_UP; - - png_set_filter(pp, 0/*method*/, filters); - } -# endif - - png_write_row(pp, row); - } - } - } - -#ifdef PNG_TEXT_SUPPORTED - { - static char key[] = "end marker"; - static char comment[] = "end"; - png_text text; - - /* Use a compressed text string to test the correct interaction of text - * compression and IDAT compression. - */ - text.compression = TEXT_COMPRESSION; - text.key = key; - text.text = comment; - text.text_length = (sizeof comment)-1; - text.itxt_length = 0; - text.lang = 0; - text.lang_key = 0; - - png_set_text(pp, pi, &text, 1); - } -#endif - - png_write_end(pp, pi); - - /* And store this under the appropriate id, then clean up. */ - store_storefile(ps, id); - - store_write_reset(ps); - } - - Catch(fault) - { - /* Use the png_store returned by the exception. This may help the compiler - * because 'ps' is not used in this branch of the setjmp. Note that fault - * and ps will always be the same value. - */ - store_write_reset(fault); - } -} - -static void -make_size(png_store* const ps, png_byte const colour_type, int bdlo, - int const bdhi) -{ - for (; bdlo <= bdhi; ++bdlo) - { - png_uint_32 width; - - for (width = 1; width <= 16; ++width) - { - png_uint_32 height; - - for (height = 1; height <= 16; ++height) - { - /* The four combinations of DIY interlace and interlace or not - - * no interlace + DIY should be identical to no interlace with - * libpng doing it. - */ - make_size_image(ps, colour_type, DEPTH(bdlo), PNG_INTERLACE_NONE, - width, height, 0); - make_size_image(ps, colour_type, DEPTH(bdlo), PNG_INTERLACE_NONE, - width, height, 1); -# ifdef PNG_WRITE_INTERLACING_SUPPORTED - make_size_image(ps, colour_type, DEPTH(bdlo), PNG_INTERLACE_ADAM7, - width, height, 0); -# endif -# if CAN_WRITE_INTERLACE - /* 1.7.0 removes the hack that prevented app write of an interlaced - * image if WRITE_INTERLACE was not supported - */ - make_size_image(ps, colour_type, DEPTH(bdlo), PNG_INTERLACE_ADAM7, - width, height, 1); -# endif - } - } - } -} - -static void -make_size_images(png_store *ps) -{ - /* This is in case of errors. */ - safecat(ps->test, sizeof ps->test, 0, "make size images"); - - /* Arguments are colour_type, low bit depth, high bit depth - */ - make_size(ps, 0, 0, WRITE_BDHI); - make_size(ps, 2, 3, WRITE_BDHI); - make_size(ps, 3, 0, 3 /*palette: max 8 bits*/); - make_size(ps, 4, 3, WRITE_BDHI); - make_size(ps, 6, 3, WRITE_BDHI); -} - -#ifdef PNG_READ_SUPPORTED -/* Return a row based on image id and 'y' for checking: */ -static void -standard_row(png_const_structp pp, png_byte std[STANDARD_ROWMAX], - png_uint_32 id, png_uint_32 y) -{ - if (WIDTH_FROM_ID(id) == 0) - transform_row(pp, std, COL_FROM_ID(id), DEPTH_FROM_ID(id), y); - else - size_row(std, WIDTH_FROM_ID(id) * bit_size(pp, COL_FROM_ID(id), - DEPTH_FROM_ID(id)), y); -} -#endif /* PNG_READ_SUPPORTED */ - -/* Tests - individual test cases */ -/* Like 'make_standard' but errors are deliberately introduced into the calls - * to ensure that they get detected - it should not be possible to write an - * invalid image with libpng! - */ -/* TODO: the 'set' functions can probably all be made to take a - * png_const_structp rather than a modifiable one. - */ -#ifdef PNG_WARNINGS_SUPPORTED -static void -sBIT0_error_fn(png_structp pp, png_infop pi) -{ - /* 0 is invalid... */ - png_color_8 bad; - bad.red = bad.green = bad.blue = bad.gray = bad.alpha = 0; - png_set_sBIT(pp, pi, &bad); -} - -static void -sBIT_error_fn(png_structp pp, png_infop pi) -{ - png_byte bit_depth; - png_color_8 bad; - - if (png_get_color_type(pp, pi) == PNG_COLOR_TYPE_PALETTE) - bit_depth = 8; - - else - bit_depth = png_get_bit_depth(pp, pi); - - /* Now we know the bit depth we can easily generate an invalid sBIT entry */ - bad.red = bad.green = bad.blue = bad.gray = bad.alpha = - (png_byte)(bit_depth+1); - png_set_sBIT(pp, pi, &bad); -} - -static const struct -{ - void (*fn)(png_structp, png_infop); - const char *msg; - unsigned int warning :1; /* the error is a warning... */ -} error_test[] = - { - /* no warnings makes these errors undetectable prior to 1.7.0 */ - { sBIT0_error_fn, "sBIT(0): failed to detect error", - PNG_LIBPNG_VER < 10700 }, - - { sBIT_error_fn, "sBIT(too big): failed to detect error", - PNG_LIBPNG_VER < 10700 }, - }; - -static void -make_error(png_store* const ps, png_byte const colour_type, - png_byte bit_depth, int interlace_type, int test, png_const_charp name) -{ - context(ps, fault); - - check_interlace_type(interlace_type); - - Try - { - png_infop pi; - png_structp pp = set_store_for_write(ps, &pi, name); - png_uint_32 w, h; - gnu_volatile(pp) - - if (pp == NULL) - Throw ps; - - w = transform_width(pp, colour_type, bit_depth); - gnu_volatile(w) - h = transform_height(pp, colour_type, bit_depth); - gnu_volatile(h) - png_set_IHDR(pp, pi, w, h, bit_depth, colour_type, interlace_type, - PNG_COMPRESSION_TYPE_BASE, PNG_FILTER_TYPE_BASE); - - if (colour_type == 3) /* palette */ - init_standard_palette(ps, pp, pi, 1U << bit_depth, 0/*do tRNS*/); - - /* Time for a few errors; these are in various optional chunks, the - * standard tests test the standard chunks pretty well. - */ -# define exception__prev exception_prev_1 -# define exception__env exception_env_1 - Try - { - gnu_volatile(exception__prev) - - /* Expect this to throw: */ - ps->expect_error = !error_test[test].warning; - ps->expect_warning = error_test[test].warning; - ps->saw_warning = 0; - error_test[test].fn(pp, pi); - - /* Normally the error is only detected here: */ - png_write_info(pp, pi); - - /* And handle the case where it was only a warning: */ - if (ps->expect_warning && ps->saw_warning) - Throw ps; - - /* If we get here there is a problem, we have success - no error or - * no warning - when we shouldn't have success. Log an error. - */ - store_log(ps, pp, error_test[test].msg, 1 /*error*/); - } - - Catch (fault) - { /* expected exit */ - } -#undef exception__prev -#undef exception__env - - /* And clear these flags */ - ps->expect_warning = 0; - - if (ps->expect_error) - ps->expect_error = 0; - - else - { - /* Now write the whole image, just to make sure that the detected, or - * undetected, error has not created problems inside libpng. This - * doesn't work if there was a png_error in png_write_info because that - * can abort before PLTE was written. - */ - if (png_get_rowbytes(pp, pi) != - transform_rowsize(pp, colour_type, bit_depth)) - png_error(pp, "row size incorrect"); - - else - { - int npasses = set_write_interlace_handling(pp, interlace_type); - int pass; - - if (npasses != npasses_from_interlace_type(pp, interlace_type)) - png_error(pp, "write: png_set_interlace_handling failed"); - - for (pass=0; pass 0) - interlace_row(buffer, buffer, - bit_size(pp, colour_type, bit_depth), w, pass, - 0/*data always bigendian*/); - else - continue; - } -# endif /* do_own_interlace */ - - png_write_row(pp, buffer); - } - } - } /* image writing */ - - png_write_end(pp, pi); - } - - /* The following deletes the file that was just written. */ - store_write_reset(ps); - } - - Catch(fault) - { - store_write_reset(fault); - } -} - -static int -make_errors(png_modifier* const pm, png_byte const colour_type, - int bdlo, int const bdhi) -{ - for (; bdlo <= bdhi; ++bdlo) - { - int interlace_type; - - for (interlace_type = PNG_INTERLACE_NONE; - interlace_type < INTERLACE_LAST; ++interlace_type) - { - unsigned int test; - char name[FILE_NAME_SIZE]; - - standard_name(name, sizeof name, 0, colour_type, 1<this, colour_type, DEPTH(bdlo), interlace_type, - test, name); - - if (fail(pm)) - return 0; - } - } - } - - return 1; /* keep going */ -} -#endif /* PNG_WARNINGS_SUPPORTED */ - -static void -perform_error_test(png_modifier *pm) -{ -#ifdef PNG_WARNINGS_SUPPORTED /* else there are no cases that work! */ - /* Need to do this here because we just write in this test. */ - safecat(pm->this.test, sizeof pm->this.test, 0, "error test"); - - if (!make_errors(pm, 0, 0, WRITE_BDHI)) - return; - - if (!make_errors(pm, 2, 3, WRITE_BDHI)) - return; - - if (!make_errors(pm, 3, 0, 3)) - return; - - if (!make_errors(pm, 4, 3, WRITE_BDHI)) - return; - - if (!make_errors(pm, 6, 3, WRITE_BDHI)) - return; -#else - UNUSED(pm) -#endif -} - -/* This is just to validate the internal PNG formatting code - if this fails - * then the warning messages the library outputs will probably be garbage. - */ -static void -perform_formatting_test(png_store *ps) -{ -#ifdef PNG_TIME_RFC1123_SUPPORTED - /* The handle into the formatting code is the RFC1123 support; this test does - * nothing if that is compiled out. - */ - context(ps, fault); - - Try - { - png_const_charp correct = "29 Aug 2079 13:53:60 +0000"; - png_const_charp result; -# if PNG_LIBPNG_VER >= 10600 - char timestring[29]; -# endif - png_structp pp; - png_time pt; - - pp = set_store_for_write(ps, NULL, "libpng formatting test"); - - if (pp == NULL) - Throw ps; - - - /* Arbitrary settings: */ - pt.year = 2079; - pt.month = 8; - pt.day = 29; - pt.hour = 13; - pt.minute = 53; - pt.second = 60; /* a leap second */ - -# if PNG_LIBPNG_VER < 10600 - result = png_convert_to_rfc1123(pp, &pt); -# else - if (png_convert_to_rfc1123_buffer(timestring, &pt)) - result = timestring; - - else - result = NULL; -# endif - - if (result == NULL) - png_error(pp, "png_convert_to_rfc1123 failed"); - - if (strcmp(result, correct) != 0) - { - size_t pos = 0; - char msg[128]; - - pos = safecat(msg, sizeof msg, pos, "png_convert_to_rfc1123("); - pos = safecat(msg, sizeof msg, pos, correct); - pos = safecat(msg, sizeof msg, pos, ") returned: '"); - pos = safecat(msg, sizeof msg, pos, result); - pos = safecat(msg, sizeof msg, pos, "'"); - - png_error(pp, msg); - } - - store_write_reset(ps); - } - - Catch(fault) - { - store_write_reset(fault); - } -#else - UNUSED(ps) -#endif -} - -#ifdef PNG_READ_SUPPORTED -/* Because we want to use the same code in both the progressive reader and the - * sequential reader it is necessary to deal with the fact that the progressive - * reader callbacks only have one parameter (png_get_progressive_ptr()), so this - * must contain all the test parameters and all the local variables directly - * accessible to the sequential reader implementation. - * - * The technique adopted is to reinvent part of what Dijkstra termed a - * 'display'; an array of pointers to the stack frames of enclosing functions so - * that a nested function definition can access the local (C auto) variables of - * the functions that contain its definition. In fact C provides the first - * pointer (the local variables - the stack frame pointer) and the last (the - * global variables - the BCPL global vector typically implemented as global - * addresses), this code requires one more pointer to make the display - the - * local variables (and function call parameters) of the function that actually - * invokes either the progressive or sequential reader. - * - * Perhaps confusingly this technique is confounded with classes - the - * 'standard_display' defined here is sub-classed as the 'gamma_display' below. - * A gamma_display is a standard_display, taking advantage of the ANSI-C - * requirement that the pointer to the first member of a structure must be the - * same as the pointer to the structure. This allows us to reuse standard_ - * functions in the gamma test code; something that could not be done with - * nested functions! - */ -typedef struct standard_display -{ - png_store* ps; /* Test parameters (passed to the function) */ - png_byte colour_type; - png_byte bit_depth; - png_byte red_sBIT; /* Input data sBIT values. */ - png_byte green_sBIT; - png_byte blue_sBIT; - png_byte alpha_sBIT; - png_byte interlace_type; - png_byte filler; /* Output has a filler */ - png_uint_32 id; /* Calculated file ID */ - png_uint_32 w; /* Width of image */ - png_uint_32 h; /* Height of image */ - int npasses; /* Number of interlaced passes */ - png_uint_32 pixel_size; /* Width of one pixel in bits */ - png_uint_32 bit_width; /* Width of output row in bits */ - size_t cbRow; /* Bytes in a row of the output image */ - int do_interlace; /* Do interlacing internally */ - int littleendian; /* App (row) data is little endian */ - int is_transparent; /* Transparency information was present. */ - int has_tRNS; /* color type GRAY or RGB with a tRNS chunk. */ - int speed; /* Doing a speed test */ - int use_update_info;/* Call update_info, not start_image */ - struct - { - png_uint_16 red; - png_uint_16 green; - png_uint_16 blue; - } transparent; /* The transparent color, if set. */ - int npalette; /* Number of entries in the palette. */ - store_palette - palette; -} standard_display; - -static void -standard_display_init(standard_display *dp, png_store* ps, png_uint_32 id, - int do_interlace, int use_update_info) -{ - memset(dp, 0, sizeof *dp); - - dp->ps = ps; - dp->colour_type = COL_FROM_ID(id); - dp->bit_depth = DEPTH_FROM_ID(id); - if (dp->bit_depth < 1 || dp->bit_depth > 16) - internal_error(ps, "internal: bad bit depth"); - if (dp->colour_type == 3) - dp->red_sBIT = dp->blue_sBIT = dp->green_sBIT = dp->alpha_sBIT = 8; - else - dp->red_sBIT = dp->blue_sBIT = dp->green_sBIT = dp->alpha_sBIT = - dp->bit_depth; - dp->interlace_type = INTERLACE_FROM_ID(id); - check_interlace_type(dp->interlace_type); - dp->id = id; - /* All the rest are filled in after the read_info: */ - dp->w = 0; - dp->h = 0; - dp->npasses = 0; - dp->pixel_size = 0; - dp->bit_width = 0; - dp->cbRow = 0; - dp->do_interlace = do_interlace; - dp->littleendian = 0; - dp->is_transparent = 0; - dp->speed = ps->speed; - dp->use_update_info = use_update_info; - dp->npalette = 0; - /* Preset the transparent color to black: */ - memset(&dp->transparent, 0, sizeof dp->transparent); - /* Preset the palette to full intensity/opaque throughout: */ - memset(dp->palette, 0xff, sizeof dp->palette); -} - -/* Initialize the palette fields - this must be done later because the palette - * comes from the particular png_store_file that is selected. - */ -static void -standard_palette_init(standard_display *dp) -{ - store_palette_entry *palette = store_current_palette(dp->ps, &dp->npalette); - - /* The remaining entries remain white/opaque. */ - if (dp->npalette > 0) - { - int i = dp->npalette; - memcpy(dp->palette, palette, i * sizeof *palette); - - /* Check for a non-opaque palette entry: */ - while (--i >= 0) - if (palette[i].alpha < 255) - break; - -# ifdef __GNUC__ - /* GCC can't handle the more obviously optimizable version. */ - if (i >= 0) - dp->is_transparent = 1; - else - dp->is_transparent = 0; -# else - dp->is_transparent = (i >= 0); -# endif - } -} - -/* Utility to read the palette from the PNG file and convert it into - * store_palette format. This returns 1 if there is any transparency in the - * palette (it does not check for a transparent colour in the non-palette case.) - */ -static int -read_palette(store_palette palette, int *npalette, png_const_structp pp, - png_infop pi) -{ - png_colorp pal; - png_bytep trans_alpha; - int num; - - pal = 0; - *npalette = -1; - - if (png_get_PLTE(pp, pi, &pal, npalette) & PNG_INFO_PLTE) - { - int i = *npalette; - - if (i <= 0 || i > 256) - png_error(pp, "validate: invalid PLTE count"); - - while (--i >= 0) - { - palette[i].red = pal[i].red; - palette[i].green = pal[i].green; - palette[i].blue = pal[i].blue; - } - - /* Mark the remainder of the entries with a flag value (other than - * white/opaque which is the flag value stored above.) - */ - memset(palette + *npalette, 126, (256-*npalette) * sizeof *palette); - } - - else /* !png_get_PLTE */ - { - if (*npalette != (-1)) - png_error(pp, "validate: invalid PLTE result"); - /* But there is no palette, so record this: */ - *npalette = 0; - memset(palette, 113, sizeof (store_palette)); - } - - trans_alpha = 0; - num = 2; /* force error below */ - if ((png_get_tRNS(pp, pi, &trans_alpha, &num, 0) & PNG_INFO_tRNS) != 0 && - (trans_alpha != NULL || num != 1/*returns 1 for a transparent color*/) && - /* Oops, if a palette tRNS gets expanded png_read_update_info (at least so - * far as 1.5.4) does not remove the trans_alpha pointer, only num_trans, - * so in the above call we get a success, we get a pointer (who knows what - * to) and we get num_trans == 0: - */ - !(trans_alpha != NULL && num == 0)) /* TODO: fix this in libpng. */ - { - int i; - - /* Any of these are crash-worthy - given the implementation of - * png_get_tRNS up to 1.5 an app won't crash if it just checks the - * result above and fails to check that the variables it passed have - * actually been filled in! Note that if the app were to pass the - * last, png_color_16p, variable too it couldn't rely on this. - */ - if (trans_alpha == NULL || num <= 0 || num > 256 || num > *npalette) - png_error(pp, "validate: unexpected png_get_tRNS (palette) result"); - - for (i=0; iis_transparent) - png_error(pp, "validate: palette transparency changed"); - - if (npalette != dp->npalette) - { - size_t pos = 0; - char msg[64]; - - pos = safecat(msg, sizeof msg, pos, "validate: palette size changed: "); - pos = safecatn(msg, sizeof msg, pos, dp->npalette); - pos = safecat(msg, sizeof msg, pos, " -> "); - pos = safecatn(msg, sizeof msg, pos, npalette); - png_error(pp, msg); - } - - { - int i = npalette; /* npalette is aliased */ - - while (--i >= 0) - if (palette[i].red != dp->palette[i].red || - palette[i].green != dp->palette[i].green || - palette[i].blue != dp->palette[i].blue || - palette[i].alpha != dp->palette[i].alpha) - png_error(pp, "validate: PLTE or tRNS chunk changed"); - } -} - -/* By passing a 'standard_display' the progressive callbacks can be used - * directly by the sequential code, the functions suffixed "_imp" are the - * implementations, the functions without the suffix are the callbacks. - * - * The code for the info callback is split into two because this callback calls - * png_read_update_info or png_start_read_image and what gets called depends on - * whether the info needs updating (we want to test both calls in pngvalid.) - */ -static void -standard_info_part1(standard_display *dp, png_structp pp, png_infop pi) -{ - if (png_get_bit_depth(pp, pi) != dp->bit_depth) - png_error(pp, "validate: bit depth changed"); - - if (png_get_color_type(pp, pi) != dp->colour_type) - png_error(pp, "validate: color type changed"); - - if (png_get_filter_type(pp, pi) != PNG_FILTER_TYPE_BASE) - png_error(pp, "validate: filter type changed"); - - if (png_get_interlace_type(pp, pi) != dp->interlace_type) - png_error(pp, "validate: interlacing changed"); - - if (png_get_compression_type(pp, pi) != PNG_COMPRESSION_TYPE_BASE) - png_error(pp, "validate: compression type changed"); - - dp->w = png_get_image_width(pp, pi); - - if (dp->w != standard_width(pp, dp->id)) - png_error(pp, "validate: image width changed"); - - dp->h = png_get_image_height(pp, pi); - - if (dp->h != standard_height(pp, dp->id)) - png_error(pp, "validate: image height changed"); - - /* Record (but don't check at present) the input sBIT according to the colour - * type information. - */ - { - png_color_8p sBIT = 0; - - if (png_get_sBIT(pp, pi, &sBIT) & PNG_INFO_sBIT) - { - int sBIT_invalid = 0; - - if (sBIT == 0) - png_error(pp, "validate: unexpected png_get_sBIT result"); - - if (dp->colour_type & PNG_COLOR_MASK_COLOR) - { - if (sBIT->red == 0 || sBIT->red > dp->bit_depth) - sBIT_invalid = 1; - else - dp->red_sBIT = sBIT->red; - - if (sBIT->green == 0 || sBIT->green > dp->bit_depth) - sBIT_invalid = 1; - else - dp->green_sBIT = sBIT->green; - - if (sBIT->blue == 0 || sBIT->blue > dp->bit_depth) - sBIT_invalid = 1; - else - dp->blue_sBIT = sBIT->blue; - } - - else /* !COLOR */ - { - if (sBIT->gray == 0 || sBIT->gray > dp->bit_depth) - sBIT_invalid = 1; - else - dp->blue_sBIT = dp->green_sBIT = dp->red_sBIT = sBIT->gray; - } - - /* All 8 bits in tRNS for a palette image are significant - see the - * spec. - */ - if (dp->colour_type & PNG_COLOR_MASK_ALPHA) - { - if (sBIT->alpha == 0 || sBIT->alpha > dp->bit_depth) - sBIT_invalid = 1; - else - dp->alpha_sBIT = sBIT->alpha; - } - - if (sBIT_invalid) - png_error(pp, "validate: sBIT value out of range"); - } - } - - /* Important: this is validating the value *before* any transforms have been - * put in place. It doesn't matter for the standard tests, where there are - * no transforms, but it does for other tests where rowbytes may change after - * png_read_update_info. - */ - if (png_get_rowbytes(pp, pi) != standard_rowsize(pp, dp->id)) - png_error(pp, "validate: row size changed"); - - /* Validate the colour type 3 palette (this can be present on other color - * types.) - */ - standard_palette_validate(dp, pp, pi); - - /* In any case always check for a transparent color (notice that the - * colour type 3 case must not give a successful return on the get_tRNS call - * with these arguments!) - */ - { - png_color_16p trans_color = 0; - - if (png_get_tRNS(pp, pi, 0, 0, &trans_color) & PNG_INFO_tRNS) - { - if (trans_color == 0) - png_error(pp, "validate: unexpected png_get_tRNS (color) result"); - - switch (dp->colour_type) - { - case 0: - dp->transparent.red = dp->transparent.green = dp->transparent.blue = - trans_color->gray; - dp->has_tRNS = 1; - break; - - case 2: - dp->transparent.red = trans_color->red; - dp->transparent.green = trans_color->green; - dp->transparent.blue = trans_color->blue; - dp->has_tRNS = 1; - break; - - case 3: - /* Not expected because it should result in the array case - * above. - */ - png_error(pp, "validate: unexpected png_get_tRNS result"); - break; - - default: - png_error(pp, "validate: invalid tRNS chunk with alpha image"); - } - } - } - - /* Read the number of passes - expected to match the value used when - * creating the image (interlaced or not). This has the side effect of - * turning on interlace handling (if do_interlace is not set.) - */ - dp->npasses = npasses_from_interlace_type(pp, dp->interlace_type); - if (!dp->do_interlace) - { -# ifdef PNG_READ_INTERLACING_SUPPORTED - if (dp->npasses != png_set_interlace_handling(pp)) - png_error(pp, "validate: file changed interlace type"); -# else /* !READ_INTERLACING */ - /* This should never happen: the relevant tests (!do_interlace) should - * not be run. - */ - if (dp->npasses > 1) - png_error(pp, "validate: no libpng interlace support"); -# endif /* !READ_INTERLACING */ - } - - /* Caller calls png_read_update_info or png_start_read_image now, then calls - * part2. - */ -} - -/* This must be called *after* the png_read_update_info call to get the correct - * 'rowbytes' value, otherwise png_get_rowbytes will refer to the untransformed - * image. - */ -static void -standard_info_part2(standard_display *dp, png_const_structp pp, - png_const_infop pi, int nImages) -{ - /* Record cbRow now that it can be found. */ - { - png_byte ct = png_get_color_type(pp, pi); - png_byte bd = png_get_bit_depth(pp, pi); - - if (bd >= 8 && (ct == PNG_COLOR_TYPE_RGB || ct == PNG_COLOR_TYPE_GRAY) && - dp->filler) - ct |= 4; /* handle filler as faked alpha channel */ - - dp->pixel_size = bit_size(pp, ct, bd); - } - dp->bit_width = png_get_image_width(pp, pi) * dp->pixel_size; - dp->cbRow = png_get_rowbytes(pp, pi); - - /* Validate the rowbytes here again. */ - if (dp->cbRow != (dp->bit_width+7)/8) - png_error(pp, "bad png_get_rowbytes calculation"); - - /* Then ensure there is enough space for the output image(s). */ - store_ensure_image(dp->ps, pp, nImages, dp->cbRow, dp->h); -} - -static void -standard_info_imp(standard_display *dp, png_structp pp, png_infop pi, - int nImages) -{ - /* Note that the validation routine has the side effect of turning on - * interlace handling in the subsequent code. - */ - standard_info_part1(dp, pp, pi); - - /* And the info callback has to call this (or png_read_update_info - see - * below in the png_modifier code for that variant. - */ - if (dp->use_update_info) - { - /* For debugging the effect of multiple calls: */ - int i = dp->use_update_info; - while (i-- > 0) - png_read_update_info(pp, pi); - } - - else - png_start_read_image(pp); - - /* Validate the height, width and rowbytes plus ensure that sufficient buffer - * exists for decoding the image. - */ - standard_info_part2(dp, pp, pi, nImages); -} - -static void PNGCBAPI -standard_info(png_structp pp, png_infop pi) -{ - standard_display *dp = voidcast(standard_display*, - png_get_progressive_ptr(pp)); - - /* Call with nImages==1 because the progressive reader can only produce one - * image. - */ - standard_info_imp(dp, pp, pi, 1 /*only one image*/); -} - -static void PNGCBAPI -progressive_row(png_structp ppIn, png_bytep new_row, png_uint_32 y, int pass) -{ - png_const_structp pp = ppIn; - const standard_display *dp = voidcast(standard_display*, - png_get_progressive_ptr(pp)); - - /* When handling interlacing some rows will be absent in each pass, the - * callback still gets called, but with a NULL pointer. This is checked - * in the 'else' clause below. We need our own 'cbRow', but we can't call - * png_get_rowbytes because we got no info structure. - */ - if (new_row != NULL) - { - png_bytep row; - - /* In the case where the reader doesn't do the interlace it gives - * us the y in the sub-image: - */ - if (dp->do_interlace && dp->interlace_type == PNG_INTERLACE_ADAM7) - { -#ifdef PNG_USER_TRANSFORM_INFO_SUPPORTED - /* Use this opportunity to validate the png 'current' APIs: */ - if (y != png_get_current_row_number(pp)) - png_error(pp, "png_get_current_row_number is broken"); - - if (pass != png_get_current_pass_number(pp)) - png_error(pp, "png_get_current_pass_number is broken"); -#endif /* USER_TRANSFORM_INFO */ - - y = PNG_ROW_FROM_PASS_ROW(y, pass); - } - - /* Validate this just in case. */ - if (y >= dp->h) - png_error(pp, "invalid y to progressive row callback"); - - row = store_image_row(dp->ps, pp, 0, y); - - /* Combine the new row into the old: */ -#ifdef PNG_READ_INTERLACING_SUPPORTED - if (dp->do_interlace) -#endif /* READ_INTERLACING */ - { - if (dp->interlace_type == PNG_INTERLACE_ADAM7) - deinterlace_row(row, new_row, dp->pixel_size, dp->w, pass, - dp->littleendian); - else - row_copy(row, new_row, dp->pixel_size * dp->w, dp->littleendian); - } -#ifdef PNG_READ_INTERLACING_SUPPORTED - else - png_progressive_combine_row(pp, row, new_row); -#endif /* PNG_READ_INTERLACING_SUPPORTED */ - } - - else if (dp->interlace_type == PNG_INTERLACE_ADAM7 && - PNG_ROW_IN_INTERLACE_PASS(y, pass) && - PNG_PASS_COLS(dp->w, pass) > 0) - png_error(pp, "missing row in progressive de-interlacing"); -} - -static void -sequential_row(standard_display *dp, png_structp pp, png_infop pi, - int iImage, int iDisplay) -{ - int npasses = dp->npasses; - int do_interlace = dp->do_interlace && - dp->interlace_type == PNG_INTERLACE_ADAM7; - png_uint_32 height = standard_height(pp, dp->id); - png_uint_32 width = standard_width(pp, dp->id); - const png_store* ps = dp->ps; - int pass; - - for (pass=0; pass 0 && PNG_ROW_IN_INTERLACE_PASS(y, pass)) - { - /* Read the row into a pair of temporary buffers, then do the - * merge here into the output rows. - */ - png_byte row[STANDARD_ROWMAX], display[STANDARD_ROWMAX]; - - /* The following aids (to some extent) error detection - we can - * see where png_read_row wrote. Use opposite values in row and - * display to make this easier. Don't use 0xff (which is used in - * the image write code to fill unused bits) or 0 (which is a - * likely value to overwrite unused bits with). - */ - memset(row, 0xc5, sizeof row); - memset(display, 0x5c, sizeof display); - - png_read_row(pp, row, display); - - if (iImage >= 0) - deinterlace_row(store_image_row(ps, pp, iImage, y), row, - dp->pixel_size, dp->w, pass, dp->littleendian); - - if (iDisplay >= 0) - deinterlace_row(store_image_row(ps, pp, iDisplay, y), display, - dp->pixel_size, dp->w, pass, dp->littleendian); - } - } - else - png_read_row(pp, - iImage >= 0 ? store_image_row(ps, pp, iImage, y) : NULL, - iDisplay >= 0 ? store_image_row(ps, pp, iDisplay, y) : NULL); - } - } - - /* And finish the read operation (only really necessary if the caller wants - * to find additional data in png_info from chunks after the last IDAT.) - */ - png_read_end(pp, pi); -} - -#ifdef PNG_TEXT_SUPPORTED -static void -standard_check_text(png_const_structp pp, png_const_textp tp, - png_const_charp keyword, png_const_charp text) -{ - char msg[1024]; - size_t pos = safecat(msg, sizeof msg, 0, "text: "); - size_t ok; - - pos = safecat(msg, sizeof msg, pos, keyword); - pos = safecat(msg, sizeof msg, pos, ": "); - ok = pos; - - if (tp->compression != TEXT_COMPRESSION) - { - char buf[64]; - - sprintf(buf, "compression [%d->%d], ", TEXT_COMPRESSION, - tp->compression); - pos = safecat(msg, sizeof msg, pos, buf); - } - - if (tp->key == NULL || strcmp(tp->key, keyword) != 0) - { - pos = safecat(msg, sizeof msg, pos, "keyword \""); - if (tp->key != NULL) - { - pos = safecat(msg, sizeof msg, pos, tp->key); - pos = safecat(msg, sizeof msg, pos, "\", "); - } - - else - pos = safecat(msg, sizeof msg, pos, "null, "); - } - - if (tp->text == NULL) - pos = safecat(msg, sizeof msg, pos, "text lost, "); - - else - { - if (tp->text_length != strlen(text)) - { - char buf[64]; - sprintf(buf, "text length changed[%lu->%lu], ", - (unsigned long)strlen(text), (unsigned long)tp->text_length); - pos = safecat(msg, sizeof msg, pos, buf); - } - - if (strcmp(tp->text, text) != 0) - { - pos = safecat(msg, sizeof msg, pos, "text becomes \""); - pos = safecat(msg, sizeof msg, pos, tp->text); - pos = safecat(msg, sizeof msg, pos, "\" (was \""); - pos = safecat(msg, sizeof msg, pos, text); - pos = safecat(msg, sizeof msg, pos, "\"), "); - } - } - - if (tp->itxt_length != 0) - pos = safecat(msg, sizeof msg, pos, "iTXt length set, "); - - if (tp->lang != NULL) - { - pos = safecat(msg, sizeof msg, pos, "iTXt language \""); - pos = safecat(msg, sizeof msg, pos, tp->lang); - pos = safecat(msg, sizeof msg, pos, "\", "); - } - - if (tp->lang_key != NULL) - { - pos = safecat(msg, sizeof msg, pos, "iTXt keyword \""); - pos = safecat(msg, sizeof msg, pos, tp->lang_key); - pos = safecat(msg, sizeof msg, pos, "\", "); - } - - if (pos > ok) - { - msg[pos-2] = '\0'; /* Remove the ", " at the end */ - png_error(pp, msg); - } -} - -static void -standard_text_validate(standard_display *dp, png_const_structp pp, - png_infop pi, int check_end) -{ - png_textp tp = NULL; - png_uint_32 num_text = png_get_text(pp, pi, &tp, NULL); - - if (num_text == 2 && tp != NULL) - { - standard_check_text(pp, tp, "image name", dp->ps->current->name); - - /* This exists because prior to 1.5.18 the progressive reader left the - * png_struct z_stream unreset at the end of the image, so subsequent - * attempts to use it simply returns Z_STREAM_END. - */ - if (check_end) - standard_check_text(pp, tp+1, "end marker", "end"); - } - - else - { - char msg[64]; - - sprintf(msg, "expected two text items, got %lu", - (unsigned long)num_text); - png_error(pp, msg); - } -} -#else -# define standard_text_validate(dp,pp,pi,check_end) ((void)0) -#endif - -static void -standard_row_validate(standard_display *dp, png_const_structp pp, - int iImage, int iDisplay, png_uint_32 y) -{ - int where; - png_byte std[STANDARD_ROWMAX]; - - /* The row must be pre-initialized to the magic number here for the size - * tests to pass: - */ - memset(std, 178, sizeof std); - standard_row(pp, std, dp->id, y); - - /* At the end both the 'row' and 'display' arrays should end up identical. - * In earlier passes 'row' will be partially filled in, with only the pixels - * that have been read so far, but 'display' will have those pixels - * replicated to fill the unread pixels while reading an interlaced image. - */ - if (iImage >= 0 && - (where = pixel_cmp(std, store_image_row(dp->ps, pp, iImage, y), - dp->bit_width)) != 0) - { - char msg[64]; - sprintf(msg, "PNG image row[%lu][%d] changed from %.2x to %.2x", - (unsigned long)y, where-1, std[where-1], - store_image_row(dp->ps, pp, iImage, y)[where-1]); - png_error(pp, msg); - } - - if (iDisplay >= 0 && - (where = pixel_cmp(std, store_image_row(dp->ps, pp, iDisplay, y), - dp->bit_width)) != 0) - { - char msg[64]; - sprintf(msg, "display row[%lu][%d] changed from %.2x to %.2x", - (unsigned long)y, where-1, std[where-1], - store_image_row(dp->ps, pp, iDisplay, y)[where-1]); - png_error(pp, msg); - } -} - -static void -standard_image_validate(standard_display *dp, png_const_structp pp, int iImage, - int iDisplay) -{ - png_uint_32 y; - - if (iImage >= 0) - store_image_check(dp->ps, pp, iImage); - - if (iDisplay >= 0) - store_image_check(dp->ps, pp, iDisplay); - - for (y=0; yh; ++y) - standard_row_validate(dp, pp, iImage, iDisplay, y); - - /* This avoids false positives if the validation code is never called! */ - dp->ps->validated = 1; -} - -static void PNGCBAPI -standard_end(png_structp ppIn, png_infop pi) -{ - png_const_structp pp = ppIn; - standard_display *dp = voidcast(standard_display*, - png_get_progressive_ptr(pp)); - - UNUSED(pi) - - /* Validate the image - progressive reading only produces one variant for - * interlaced images. - */ - standard_text_validate(dp, pp, pi, - PNG_LIBPNG_VER >= 10518/*check_end: see comments above*/); - standard_image_validate(dp, pp, 0, -1); -} - -/* A single test run checking the standard image to ensure it is not damaged. */ -static void -standard_test(png_store* const psIn, png_uint_32 const id, - int do_interlace, int use_update_info) -{ - standard_display d; - context(psIn, fault); - - /* Set up the display (stack frame) variables from the arguments to the - * function and initialize the locals that are filled in later. - */ - standard_display_init(&d, psIn, id, do_interlace, use_update_info); - - /* Everything is protected by a Try/Catch. The functions called also - * typically have local Try/Catch blocks. - */ - Try - { - png_structp pp; - png_infop pi; - - /* Get a png_struct for reading the image. This will throw an error if it - * fails, so we don't need to check the result. - */ - pp = set_store_for_read(d.ps, &pi, d.id, - d.do_interlace ? (d.ps->progressive ? - "pngvalid progressive deinterlacer" : - "pngvalid sequential deinterlacer") : (d.ps->progressive ? - "progressive reader" : "sequential reader")); - - /* Initialize the palette correctly from the png_store_file. */ - standard_palette_init(&d); - - /* Introduce the correct read function. */ - if (d.ps->progressive) - { - png_set_progressive_read_fn(pp, &d, standard_info, progressive_row, - standard_end); - - /* Now feed data into the reader until we reach the end: */ - store_progressive_read(d.ps, pp, pi); - } - else - { - /* Note that this takes the store, not the display. */ - png_set_read_fn(pp, d.ps, store_read); - - /* Check the header values: */ - png_read_info(pp, pi); - - /* The code tests both versions of the images that the sequential - * reader can produce. - */ - standard_info_imp(&d, pp, pi, 2 /*images*/); - - /* Need the total bytes in the image below; we can't get to this point - * unless the PNG file values have been checked against the expected - * values. - */ - { - sequential_row(&d, pp, pi, 0, 1); - - /* After the last pass loop over the rows again to check that the - * image is correct. - */ - if (!d.speed) - { - standard_text_validate(&d, pp, pi, 1/*check_end*/); - standard_image_validate(&d, pp, 0, 1); - } - else - d.ps->validated = 1; - } - } - - /* Check for validation. */ - if (!d.ps->validated) - png_error(pp, "image read failed silently"); - - /* Successful completion. */ - } - - Catch(fault) - d.ps = fault; /* make sure this hasn't been clobbered. */ - - /* In either case clean up the store. */ - store_read_reset(d.ps); -} - -static int -test_standard(png_modifier* const pm, png_byte const colour_type, - int bdlo, int const bdhi) -{ - for (; bdlo <= bdhi; ++bdlo) - { - int interlace_type; - - for (interlace_type = PNG_INTERLACE_NONE; - interlace_type < INTERLACE_LAST; ++interlace_type) - { - standard_test(&pm->this, FILEID(colour_type, DEPTH(bdlo), 0/*palette*/, - interlace_type, 0, 0, 0), do_read_interlace, pm->use_update_info); - - if (fail(pm)) - return 0; - } - } - - return 1; /* keep going */ -} - -static void -perform_standard_test(png_modifier *pm) -{ - /* Test each colour type over the valid range of bit depths (expressed as - * log2(bit_depth) in turn, stop as soon as any error is detected. - */ - if (!test_standard(pm, 0, 0, READ_BDHI)) - return; - - if (!test_standard(pm, 2, 3, READ_BDHI)) - return; - - if (!test_standard(pm, 3, 0, 3)) - return; - - if (!test_standard(pm, 4, 3, READ_BDHI)) - return; - - if (!test_standard(pm, 6, 3, READ_BDHI)) - return; -} - - -/********************************** SIZE TESTS ********************************/ -static int -test_size(png_modifier* const pm, png_byte const colour_type, - int bdlo, int const bdhi) -{ - /* Run the tests on each combination. - * - * NOTE: on my 32 bit x86 each of the following blocks takes - * a total of 3.5 seconds if done across every combo of bit depth - * width and height. This is a waste of time in practice, hence the - * hinc and winc stuff: - */ - static const png_byte hinc[] = {1, 3, 11, 1, 5}; - static const png_byte winc[] = {1, 9, 5, 7, 1}; - int save_bdlo = bdlo; - - for (; bdlo <= bdhi; ++bdlo) - { - png_uint_32 h, w; - - for (h=1; h<=16; h+=hinc[bdlo]) for (w=1; w<=16; w+=winc[bdlo]) - { - /* First test all the 'size' images against the sequential - * reader using libpng to deinterlace (where required.) This - * validates the write side of libpng. There are four possibilities - * to validate. - */ - standard_test(&pm->this, FILEID(colour_type, DEPTH(bdlo), 0/*palette*/, - PNG_INTERLACE_NONE, w, h, 0), 0/*do_interlace*/, - pm->use_update_info); - - if (fail(pm)) - return 0; - - standard_test(&pm->this, FILEID(colour_type, DEPTH(bdlo), 0/*palette*/, - PNG_INTERLACE_NONE, w, h, 1), 0/*do_interlace*/, - pm->use_update_info); - - if (fail(pm)) - return 0; - - /* Now validate the interlaced read side - do_interlace true, - * in the progressive case this does actually make a difference - * to the code used in the non-interlaced case too. - */ - standard_test(&pm->this, FILEID(colour_type, DEPTH(bdlo), 0/*palette*/, - PNG_INTERLACE_NONE, w, h, 0), 1/*do_interlace*/, - pm->use_update_info); - - if (fail(pm)) - return 0; - -# if CAN_WRITE_INTERLACE - /* Validate the pngvalid code itself: */ - standard_test(&pm->this, FILEID(colour_type, DEPTH(bdlo), 0/*palette*/, - PNG_INTERLACE_ADAM7, w, h, 1), 1/*do_interlace*/, - pm->use_update_info); - - if (fail(pm)) - return 0; -# endif - } - } - - /* Now do the tests of libpng interlace handling, after we have made sure - * that the pngvalid version works: - */ - for (bdlo = save_bdlo; bdlo <= bdhi; ++bdlo) - { - png_uint_32 h, w; - - for (h=1; h<=16; h+=hinc[bdlo]) for (w=1; w<=16; w+=winc[bdlo]) - { -# ifdef PNG_READ_INTERLACING_SUPPORTED - /* Test with pngvalid generated interlaced images first; we have - * already verify these are ok (unless pngvalid has self-consistent - * read/write errors, which is unlikely), so this detects errors in the - * read side first: - */ -# if CAN_WRITE_INTERLACE - standard_test(&pm->this, FILEID(colour_type, DEPTH(bdlo), 0/*palette*/, - PNG_INTERLACE_ADAM7, w, h, 1), 0/*do_interlace*/, - pm->use_update_info); - - if (fail(pm)) - return 0; -# endif -# endif /* READ_INTERLACING */ - -# ifdef PNG_WRITE_INTERLACING_SUPPORTED - /* Test the libpng write side against the pngvalid read side: */ - standard_test(&pm->this, FILEID(colour_type, DEPTH(bdlo), 0/*palette*/, - PNG_INTERLACE_ADAM7, w, h, 0), 1/*do_interlace*/, - pm->use_update_info); - - if (fail(pm)) - return 0; -# endif - -# ifdef PNG_READ_INTERLACING_SUPPORTED -# ifdef PNG_WRITE_INTERLACING_SUPPORTED - /* Test both together: */ - standard_test(&pm->this, FILEID(colour_type, DEPTH(bdlo), 0/*palette*/, - PNG_INTERLACE_ADAM7, w, h, 0), 0/*do_interlace*/, - pm->use_update_info); - - if (fail(pm)) - return 0; -# endif -# endif /* READ_INTERLACING */ - } - } - - return 1; /* keep going */ -} - -static void -perform_size_test(png_modifier *pm) -{ - /* Test each colour type over the valid range of bit depths (expressed as - * log2(bit_depth) in turn, stop as soon as any error is detected. - */ - if (!test_size(pm, 0, 0, READ_BDHI)) - return; - - if (!test_size(pm, 2, 3, READ_BDHI)) - return; - - /* For the moment don't do the palette test - it's a waste of time when - * compared to the grayscale test. - */ -#if 0 - if (!test_size(pm, 3, 0, 3)) - return; -#endif - - if (!test_size(pm, 4, 3, READ_BDHI)) - return; - - if (!test_size(pm, 6, 3, READ_BDHI)) - return; -} - - -/******************************* TRANSFORM TESTS ******************************/ -#ifdef PNG_READ_TRANSFORMS_SUPPORTED -/* A set of tests to validate libpng image transforms. The possibilities here - * are legion because the transforms can be combined in a combinatorial - * fashion. To deal with this some measure of restraint is required, otherwise - * the tests would take forever. - */ -typedef struct image_pixel -{ - /* A local (pngvalid) representation of a PNG pixel, in all its - * various forms. - */ - unsigned int red, green, blue, alpha; /* For non-palette images. */ - unsigned int palette_index; /* For a palette image. */ - png_byte colour_type; /* As in the spec. */ - png_byte bit_depth; /* Defines bit size in row */ - png_byte sample_depth; /* Scale of samples */ - unsigned int have_tRNS :1; /* tRNS chunk may need processing */ - unsigned int swap_rgb :1; /* RGB swapped to BGR */ - unsigned int alpha_first :1; /* Alpha at start, not end */ - unsigned int alpha_inverted :1; /* Alpha channel inverted */ - unsigned int mono_inverted :1; /* Gray channel inverted */ - unsigned int swap16 :1; /* Byte swap 16-bit components */ - unsigned int littleendian :1; /* High bits on right */ - unsigned int sig_bits :1; /* Pixel shifted (sig bits only) */ - - /* For checking the code calculates double precision floating point values - * along with an error value, accumulated from the transforms. Because an - * sBIT setting allows larger error bounds (indeed, by the spec, apparently - * up to just less than +/-1 in the scaled value) the *lowest* sBIT for each - * channel is stored. This sBIT value is folded in to the stored error value - * at the end of the application of the transforms to the pixel. - * - * If sig_bits is set above the red, green, blue and alpha values have been - * scaled so they only contain the significant bits of the component values. - */ - double redf, greenf, bluef, alphaf; - double rede, greene, bluee, alphae; - png_byte red_sBIT, green_sBIT, blue_sBIT, alpha_sBIT; -} image_pixel; - -/* Shared utility function, see below. */ -static void -image_pixel_setf(image_pixel *this, unsigned int rMax, unsigned int gMax, - unsigned int bMax, unsigned int aMax) -{ - this->redf = this->red / (double)rMax; - this->greenf = this->green / (double)gMax; - this->bluef = this->blue / (double)bMax; - this->alphaf = this->alpha / (double)aMax; - - if (this->red < rMax) - this->rede = this->redf * DBL_EPSILON; - else - this->rede = 0; - if (this->green < gMax) - this->greene = this->greenf * DBL_EPSILON; - else - this->greene = 0; - if (this->blue < bMax) - this->bluee = this->bluef * DBL_EPSILON; - else - this->bluee = 0; - if (this->alpha < aMax) - this->alphae = this->alphaf * DBL_EPSILON; - else - this->alphae = 0; -} - -/* Initialize the structure for the next pixel - call this before doing any - * transforms and call it for each pixel since all the fields may need to be - * reset. - */ -static void -image_pixel_init(image_pixel *this, png_const_bytep row, png_byte colour_type, - png_byte bit_depth, png_uint_32 x, store_palette palette, - const image_pixel *format /*from pngvalid transform of input*/) -{ - png_byte sample_depth = - (png_byte)(colour_type == PNG_COLOR_TYPE_PALETTE ? 8 : bit_depth); - unsigned int max = (1U<swap16); - int littleendian = (format != 0 && format->littleendian); - int sig_bits = (format != 0 && format->sig_bits); - - /* Initially just set everything to the same number and the alpha to opaque. - * Note that this currently assumes a simple palette where entry x has colour - * rgb(x,x,x)! - */ - this->palette_index = this->red = this->green = this->blue = - sample(row, colour_type, bit_depth, x, 0, swap16, littleendian); - this->alpha = max; - this->red_sBIT = this->green_sBIT = this->blue_sBIT = this->alpha_sBIT = - sample_depth; - - /* Then override as appropriate: */ - if (colour_type == 3) /* palette */ - { - /* This permits the caller to default to the sample value. */ - if (palette != 0) - { - unsigned int i = this->palette_index; - - this->red = palette[i].red; - this->green = palette[i].green; - this->blue = palette[i].blue; - this->alpha = palette[i].alpha; - } - } - - else /* not palette */ - { - unsigned int i = 0; - - if ((colour_type & 4) != 0 && format != 0 && format->alpha_first) - { - this->alpha = this->red; - /* This handles the gray case for 'AG' pixels */ - this->palette_index = this->red = this->green = this->blue = - sample(row, colour_type, bit_depth, x, 1, swap16, littleendian); - i = 1; - } - - if (colour_type & 2) - { - /* Green is second for both BGR and RGB: */ - this->green = sample(row, colour_type, bit_depth, x, ++i, swap16, - littleendian); - - if (format != 0 && format->swap_rgb) /* BGR */ - this->red = sample(row, colour_type, bit_depth, x, ++i, swap16, - littleendian); - else - this->blue = sample(row, colour_type, bit_depth, x, ++i, swap16, - littleendian); - } - - else /* grayscale */ if (format != 0 && format->mono_inverted) - this->red = this->green = this->blue = this->red ^ max; - - if ((colour_type & 4) != 0) /* alpha */ - { - if (format == 0 || !format->alpha_first) - this->alpha = sample(row, colour_type, bit_depth, x, ++i, swap16, - littleendian); - - if (format != 0 && format->alpha_inverted) - this->alpha ^= max; - } - } - - /* Calculate the scaled values, these are simply the values divided by - * 'max' and the error is initialized to the double precision epsilon value - * from the header file. - */ - image_pixel_setf(this, - sig_bits ? (1U << format->red_sBIT)-1 : max, - sig_bits ? (1U << format->green_sBIT)-1 : max, - sig_bits ? (1U << format->blue_sBIT)-1 : max, - sig_bits ? (1U << format->alpha_sBIT)-1 : max); - - /* Store the input information for use in the transforms - these will - * modify the information. - */ - this->colour_type = colour_type; - this->bit_depth = bit_depth; - this->sample_depth = sample_depth; - this->have_tRNS = 0; - this->swap_rgb = 0; - this->alpha_first = 0; - this->alpha_inverted = 0; - this->mono_inverted = 0; - this->swap16 = 0; - this->littleendian = 0; - this->sig_bits = 0; -} - -#if defined PNG_READ_EXPAND_SUPPORTED || defined PNG_READ_GRAY_TO_RGB_SUPPORTED\ - || defined PNG_READ_EXPAND_SUPPORTED || defined PNG_READ_EXPAND_16_SUPPORTED\ - || defined PNG_READ_BACKGROUND_SUPPORTED -/* Convert a palette image to an rgb image. This necessarily converts the tRNS - * chunk at the same time, because the tRNS will be in palette form. The way - * palette validation works means that the original palette is never updated, - * instead the image_pixel value from the row contains the RGB of the - * corresponding palette entry and *this* is updated. Consequently this routine - * only needs to change the colour type information. - */ -static void -image_pixel_convert_PLTE(image_pixel *this) -{ - if (this->colour_type == PNG_COLOR_TYPE_PALETTE) - { - if (this->have_tRNS) - { - this->colour_type = PNG_COLOR_TYPE_RGB_ALPHA; - this->have_tRNS = 0; - } - else - this->colour_type = PNG_COLOR_TYPE_RGB; - - /* The bit depth of the row changes at this point too (notice that this is - * the row format, not the sample depth, which is separate.) - */ - this->bit_depth = 8; - } -} - -/* Add an alpha channel; this will import the tRNS information because tRNS is - * not valid in an alpha image. The bit depth will invariably be set to at - * least 8 prior to 1.7.0. Palette images will be converted to alpha (using - * the above API). With png_set_background the alpha channel is never expanded - * but this routine is used by pngvalid to simplify code; 'for_background' - * records this. - */ -static void -image_pixel_add_alpha(image_pixel *this, const standard_display *display, - int for_background) -{ - if (this->colour_type == PNG_COLOR_TYPE_PALETTE) - image_pixel_convert_PLTE(this); - - if ((this->colour_type & PNG_COLOR_MASK_ALPHA) == 0) - { - if (this->colour_type == PNG_COLOR_TYPE_GRAY) - { -# if PNG_LIBPNG_VER < 10700 - if (!for_background && this->bit_depth < 8) - this->bit_depth = this->sample_depth = 8; -# endif - - if (this->have_tRNS) - { - /* After 1.7 the expansion of bit depth only happens if there is a - * tRNS chunk to expand at this point. - */ -# if PNG_LIBPNG_VER >= 10700 - if (!for_background && this->bit_depth < 8) - this->bit_depth = this->sample_depth = 8; -# endif - - this->have_tRNS = 0; - - /* Check the input, original, channel value here against the - * original tRNS gray chunk valie. - */ - if (this->red == display->transparent.red) - this->alphaf = 0; - else - this->alphaf = 1; - } - else - this->alphaf = 1; - - this->colour_type = PNG_COLOR_TYPE_GRAY_ALPHA; - } - - else if (this->colour_type == PNG_COLOR_TYPE_RGB) - { - if (this->have_tRNS) - { - this->have_tRNS = 0; - - /* Again, check the exact input values, not the current transformed - * value! - */ - if (this->red == display->transparent.red && - this->green == display->transparent.green && - this->blue == display->transparent.blue) - this->alphaf = 0; - else - this->alphaf = 1; - } - else - this->alphaf = 1; - - this->colour_type = PNG_COLOR_TYPE_RGB_ALPHA; - } - - /* The error in the alpha is zero and the sBIT value comes from the - * original sBIT data (actually it will always be the original bit depth). - */ - this->alphae = 0; - this->alpha_sBIT = display->alpha_sBIT; - } -} -#endif /* transforms that need image_pixel_add_alpha */ - -struct transform_display; -typedef struct image_transform -{ - /* The name of this transform: a string. */ - const char *name; - - /* Each transform can be disabled from the command line: */ - int enable; - - /* The global list of transforms; read only. */ - struct image_transform *const list; - - /* The global count of the number of times this transform has been set on an - * image. - */ - unsigned int global_use; - - /* The local count of the number of times this transform has been set. */ - unsigned int local_use; - - /* The next transform in the list, each transform must call its own next - * transform after it has processed the pixel successfully. - */ - const struct image_transform *next; - - /* A single transform for the image, expressed as a series of function - * callbacks and some space for values. - * - * First a callback to add any required modifications to the png_modifier; - * this gets called just before the modifier is set up for read. - */ - void (*ini)(const struct image_transform *this, - struct transform_display *that); - - /* And a callback to set the transform on the current png_read_struct: - */ - void (*set)(const struct image_transform *this, - struct transform_display *that, png_structp pp, png_infop pi); - - /* Then a transform that takes an input pixel in one PNG format or another - * and modifies it by a pngvalid implementation of the transform (thus - * duplicating the libpng intent without, we hope, duplicating the bugs - * in the libpng implementation!) The png_structp is solely to allow error - * reporting via png_error and png_warning. - */ - void (*mod)(const struct image_transform *this, image_pixel *that, - png_const_structp pp, const struct transform_display *display); - - /* Add this transform to the list and return true if the transform is - * meaningful for this colour type and bit depth - if false then the - * transform should have no effect on the image so there's not a lot of - * point running it. - */ - int (*add)(struct image_transform *this, - const struct image_transform **that, png_byte colour_type, - png_byte bit_depth); -} image_transform; - -typedef struct transform_display -{ - standard_display this; - - /* Parameters */ - png_modifier* pm; - const image_transform* transform_list; - unsigned int max_gamma_8; - - /* Local variables */ - png_byte output_colour_type; - png_byte output_bit_depth; - png_byte unpacked; - - /* Modifications (not necessarily used.) */ - gama_modification gama_mod; - chrm_modification chrm_mod; - srgb_modification srgb_mod; -} transform_display; - -/* Set sRGB, cHRM and gAMA transforms as required by the current encoding. */ -static void -transform_set_encoding(transform_display *this) -{ - /* Set up the png_modifier '_current' fields then use these to determine how - * to add appropriate chunks. - */ - png_modifier *pm = this->pm; - - modifier_set_encoding(pm); - - if (modifier_color_encoding_is_set(pm)) - { - if (modifier_color_encoding_is_sRGB(pm)) - srgb_modification_init(&this->srgb_mod, pm, PNG_sRGB_INTENT_ABSOLUTE); - - else - { - /* Set gAMA and cHRM separately. */ - gama_modification_init(&this->gama_mod, pm, pm->current_gamma); - - if (pm->current_encoding != 0) - chrm_modification_init(&this->chrm_mod, pm, pm->current_encoding); - } - } -} - -/* Three functions to end the list: */ -static void -image_transform_ini_end(const image_transform *this, - transform_display *that) -{ - UNUSED(this) - UNUSED(that) -} - -static void -image_transform_set_end(const image_transform *this, - transform_display *that, png_structp pp, png_infop pi) -{ - UNUSED(this) - UNUSED(that) - UNUSED(pp) - UNUSED(pi) -} - -/* At the end of the list recalculate the output image pixel value from the - * double precision values set up by the preceding 'mod' calls: - */ -static unsigned int -sample_scale(double sample_value, unsigned int scale) -{ - sample_value = floor(sample_value * scale + .5); - - /* Return NaN as 0: */ - if (!(sample_value > 0)) - sample_value = 0; - else if (sample_value > scale) - sample_value = scale; - - return (unsigned int)sample_value; -} - -static void -image_transform_mod_end(const image_transform *this, image_pixel *that, - png_const_structp pp, const transform_display *display) -{ - unsigned int scale = (1U<sample_depth)-1; - int sig_bits = that->sig_bits; - - UNUSED(this) - UNUSED(pp) - UNUSED(display) - - /* At the end recalculate the digitized red green and blue values according - * to the current sample_depth of the pixel. - * - * The sample value is simply scaled to the maximum, checking for over - * and underflow (which can both happen for some image transforms, - * including simple size scaling, though libpng doesn't do that at present. - */ - that->red = sample_scale(that->redf, scale); - - /* This is a bit bogus; really the above calculation should use the red_sBIT - * value, not sample_depth, but because libpng does png_set_shift by just - * shifting the bits we get errors if we don't do it the same way. - */ - if (sig_bits && that->red_sBIT < that->sample_depth) - that->red >>= that->sample_depth - that->red_sBIT; - - /* The error value is increased, at the end, according to the lowest sBIT - * value seen. Common sense tells us that the intermediate integer - * representations are no more accurate than +/- 0.5 in the integral values, - * the sBIT allows the implementation to be worse than this. In addition the - * PNG specification actually permits any error within the range (-1..+1), - * but that is ignored here. Instead the final digitized value is compared, - * below to the digitized value of the error limits - this has the net effect - * of allowing (almost) +/-1 in the output value. It's difficult to see how - * any algorithm that digitizes intermediate results can be more accurate. - */ - that->rede += 1./(2*((1U<red_sBIT)-1)); - - if (that->colour_type & PNG_COLOR_MASK_COLOR) - { - that->green = sample_scale(that->greenf, scale); - if (sig_bits && that->green_sBIT < that->sample_depth) - that->green >>= that->sample_depth - that->green_sBIT; - - that->blue = sample_scale(that->bluef, scale); - if (sig_bits && that->blue_sBIT < that->sample_depth) - that->blue >>= that->sample_depth - that->blue_sBIT; - - that->greene += 1./(2*((1U<green_sBIT)-1)); - that->bluee += 1./(2*((1U<blue_sBIT)-1)); - } - else - { - that->blue = that->green = that->red; - that->bluef = that->greenf = that->redf; - that->bluee = that->greene = that->rede; - } - - if ((that->colour_type & PNG_COLOR_MASK_ALPHA) || - that->colour_type == PNG_COLOR_TYPE_PALETTE) - { - that->alpha = sample_scale(that->alphaf, scale); - that->alphae += 1./(2*((1U<alpha_sBIT)-1)); - } - else - { - that->alpha = scale; /* opaque */ - that->alphaf = 1; /* Override this. */ - that->alphae = 0; /* It's exact ;-) */ - } - - if (sig_bits && that->alpha_sBIT < that->sample_depth) - that->alpha >>= that->sample_depth - that->alpha_sBIT; -} - -/* Static 'end' structure: */ -static image_transform image_transform_end = -{ - "(end)", /* name */ - 1, /* enable */ - 0, /* list */ - 0, /* global_use */ - 0, /* local_use */ - 0, /* next */ - image_transform_ini_end, - image_transform_set_end, - image_transform_mod_end, - 0 /* never called, I want it to crash if it is! */ -}; - -/* Reader callbacks and implementations, where they differ from the standard - * ones. - */ -static void -transform_display_init(transform_display *dp, png_modifier *pm, png_uint_32 id, - const image_transform *transform_list) -{ - memset(dp, 0, sizeof *dp); - - /* Standard fields */ - standard_display_init(&dp->this, &pm->this, id, do_read_interlace, - pm->use_update_info); - - /* Parameter fields */ - dp->pm = pm; - dp->transform_list = transform_list; - dp->max_gamma_8 = 16; - - /* Local variable fields */ - dp->output_colour_type = 255; /* invalid */ - dp->output_bit_depth = 255; /* invalid */ - dp->unpacked = 0; /* not unpacked */ -} - -static void -transform_info_imp(transform_display *dp, png_structp pp, png_infop pi) -{ - /* Reuse the standard stuff as appropriate. */ - standard_info_part1(&dp->this, pp, pi); - - /* Now set the list of transforms. */ - dp->transform_list->set(dp->transform_list, dp, pp, pi); - - /* Update the info structure for these transforms: */ - { - int i = dp->this.use_update_info; - /* Always do one call, even if use_update_info is 0. */ - do - png_read_update_info(pp, pi); - while (--i > 0); - } - - /* And get the output information into the standard_display */ - standard_info_part2(&dp->this, pp, pi, 1/*images*/); - - /* Plus the extra stuff we need for the transform tests: */ - dp->output_colour_type = png_get_color_type(pp, pi); - dp->output_bit_depth = png_get_bit_depth(pp, pi); - - /* If png_set_filler is in action then fake the output color type to include - * an alpha channel where appropriate. - */ - if (dp->output_bit_depth >= 8 && - (dp->output_colour_type == PNG_COLOR_TYPE_RGB || - dp->output_colour_type == PNG_COLOR_TYPE_GRAY) && dp->this.filler) - dp->output_colour_type |= 4; - - /* Validate the combination of colour type and bit depth that we are getting - * out of libpng; the semantics of something not in the PNG spec are, at - * best, unclear. - */ - switch (dp->output_colour_type) - { - case PNG_COLOR_TYPE_PALETTE: - if (dp->output_bit_depth > 8) goto error; - /* FALLTHROUGH */ - case PNG_COLOR_TYPE_GRAY: - if (dp->output_bit_depth == 1 || dp->output_bit_depth == 2 || - dp->output_bit_depth == 4) - break; - /* FALLTHROUGH */ - default: - if (dp->output_bit_depth == 8 || dp->output_bit_depth == 16) - break; - /* FALLTHROUGH */ - error: - { - char message[128]; - size_t pos; - - pos = safecat(message, sizeof message, 0, - "invalid final bit depth: colour type("); - pos = safecatn(message, sizeof message, pos, dp->output_colour_type); - pos = safecat(message, sizeof message, pos, ") with bit depth: "); - pos = safecatn(message, sizeof message, pos, dp->output_bit_depth); - - png_error(pp, message); - } - } - - /* Use a test pixel to check that the output agrees with what we expect - - * this avoids running the whole test if the output is unexpected. This also - * checks for internal errors. - */ - { - image_pixel test_pixel; - - memset(&test_pixel, 0, sizeof test_pixel); - test_pixel.colour_type = dp->this.colour_type; /* input */ - test_pixel.bit_depth = dp->this.bit_depth; - if (test_pixel.colour_type == PNG_COLOR_TYPE_PALETTE) - test_pixel.sample_depth = 8; - else - test_pixel.sample_depth = test_pixel.bit_depth; - /* Don't need sBIT here, but it must be set to non-zero to avoid - * arithmetic overflows. - */ - test_pixel.have_tRNS = dp->this.is_transparent != 0; - test_pixel.red_sBIT = test_pixel.green_sBIT = test_pixel.blue_sBIT = - test_pixel.alpha_sBIT = test_pixel.sample_depth; - - dp->transform_list->mod(dp->transform_list, &test_pixel, pp, dp); - - if (test_pixel.colour_type != dp->output_colour_type) - { - char message[128]; - size_t pos = safecat(message, sizeof message, 0, "colour type "); - - pos = safecatn(message, sizeof message, pos, dp->output_colour_type); - pos = safecat(message, sizeof message, pos, " expected "); - pos = safecatn(message, sizeof message, pos, test_pixel.colour_type); - - png_error(pp, message); - } - - if (test_pixel.bit_depth != dp->output_bit_depth) - { - char message[128]; - size_t pos = safecat(message, sizeof message, 0, "bit depth "); - - pos = safecatn(message, sizeof message, pos, dp->output_bit_depth); - pos = safecat(message, sizeof message, pos, " expected "); - pos = safecatn(message, sizeof message, pos, test_pixel.bit_depth); - - png_error(pp, message); - } - - /* If both bit depth and colour type are correct check the sample depth. - */ - if (test_pixel.colour_type == PNG_COLOR_TYPE_PALETTE && - test_pixel.sample_depth != 8) /* oops - internal error! */ - png_error(pp, "pngvalid: internal: palette sample depth not 8"); - else if (dp->unpacked && test_pixel.bit_depth != 8) - png_error(pp, "pngvalid: internal: bad unpacked pixel depth"); - else if (!dp->unpacked && test_pixel.colour_type != PNG_COLOR_TYPE_PALETTE - && test_pixel.bit_depth != test_pixel.sample_depth) - { - char message[128]; - size_t pos = safecat(message, sizeof message, 0, - "internal: sample depth "); - - /* Because unless something has set 'unpacked' or the image is palette - * mapped we expect the transform to keep sample depth and bit depth - * the same. - */ - pos = safecatn(message, sizeof message, pos, test_pixel.sample_depth); - pos = safecat(message, sizeof message, pos, " expected "); - pos = safecatn(message, sizeof message, pos, test_pixel.bit_depth); - - png_error(pp, message); - } - else if (test_pixel.bit_depth != dp->output_bit_depth) - { - /* This could be a libpng error too; libpng has not produced what we - * expect for the output bit depth. - */ - char message[128]; - size_t pos = safecat(message, sizeof message, 0, - "internal: bit depth "); - - pos = safecatn(message, sizeof message, pos, dp->output_bit_depth); - pos = safecat(message, sizeof message, pos, " expected "); - pos = safecatn(message, sizeof message, pos, test_pixel.bit_depth); - - png_error(pp, message); - } - } -} - -static void PNGCBAPI -transform_info(png_structp pp, png_infop pi) -{ - transform_info_imp(voidcast(transform_display*, png_get_progressive_ptr(pp)), - pp, pi); -} - -static void -transform_range_check(png_const_structp pp, unsigned int r, unsigned int g, - unsigned int b, unsigned int a, unsigned int in_digitized, double in, - unsigned int out, png_byte sample_depth, double err, double limit, - const char *name, double digitization_error) -{ - /* Compare the scaled, digitzed, values of our local calculation (in+-err) - * with the digitized values libpng produced; 'sample_depth' is the actual - * digitization depth of the libpng output colors (the bit depth except for - * palette images where it is always 8.) The check on 'err' is to detect - * internal errors in pngvalid itself. - */ - unsigned int max = (1U< limit ||) !(out >= in_min && out <= in_max)) - { - char message[256]; - size_t pos; - - pos = safecat(message, sizeof message, 0, name); - pos = safecat(message, sizeof message, pos, " output value error: rgba("); - pos = safecatn(message, sizeof message, pos, r); - pos = safecat(message, sizeof message, pos, ","); - pos = safecatn(message, sizeof message, pos, g); - pos = safecat(message, sizeof message, pos, ","); - pos = safecatn(message, sizeof message, pos, b); - pos = safecat(message, sizeof message, pos, ","); - pos = safecatn(message, sizeof message, pos, a); - pos = safecat(message, sizeof message, pos, "): "); - pos = safecatn(message, sizeof message, pos, out); - pos = safecat(message, sizeof message, pos, " expected: "); - pos = safecatn(message, sizeof message, pos, in_digitized); - pos = safecat(message, sizeof message, pos, " ("); - pos = safecatd(message, sizeof message, pos, (in-err)*max, 3); - pos = safecat(message, sizeof message, pos, ".."); - pos = safecatd(message, sizeof message, pos, (in+err)*max, 3); - pos = safecat(message, sizeof message, pos, ")"); - - png_error(pp, message); - } - - UNUSED(limit) -} - -static void -transform_image_validate(transform_display *dp, png_const_structp pp, - png_infop pi) -{ - /* Constants for the loop below: */ - const png_store* const ps = dp->this.ps; - png_byte in_ct = dp->this.colour_type; - png_byte in_bd = dp->this.bit_depth; - png_uint_32 w = dp->this.w; - png_uint_32 h = dp->this.h; - png_byte out_ct = dp->output_colour_type; - png_byte out_bd = dp->output_bit_depth; - png_byte sample_depth = - (png_byte)(out_ct == PNG_COLOR_TYPE_PALETTE ? 8 : out_bd); - png_byte red_sBIT = dp->this.red_sBIT; - png_byte green_sBIT = dp->this.green_sBIT; - png_byte blue_sBIT = dp->this.blue_sBIT; - png_byte alpha_sBIT = dp->this.alpha_sBIT; - int have_tRNS = dp->this.is_transparent; - double digitization_error; - - store_palette out_palette; - png_uint_32 y; - - UNUSED(pi) - - /* Check for row overwrite errors */ - store_image_check(dp->this.ps, pp, 0); - - /* Read the palette corresponding to the output if the output colour type - * indicates a palette, otherwise set out_palette to garbage. - */ - if (out_ct == PNG_COLOR_TYPE_PALETTE) - { - /* Validate that the palette count itself has not changed - this is not - * expected. - */ - int npalette = (-1); - - (void)read_palette(out_palette, &npalette, pp, pi); - if (npalette != dp->this.npalette) - png_error(pp, "unexpected change in palette size"); - - digitization_error = .5; - } - else - { - png_byte in_sample_depth; - - memset(out_palette, 0x5e, sizeof out_palette); - - /* use-input-precision means assume that if the input has 8 bit (or less) - * samples and the output has 16 bit samples the calculations will be done - * with 8 bit precision, not 16. - */ - if (in_ct == PNG_COLOR_TYPE_PALETTE || in_bd < 16) - in_sample_depth = 8; - else - in_sample_depth = in_bd; - - if (sample_depth != 16 || in_sample_depth > 8 || - !dp->pm->calculations_use_input_precision) - digitization_error = .5; - - /* Else calculations are at 8 bit precision, and the output actually - * consists of scaled 8-bit values, so scale .5 in 8 bits to the 16 bits: - */ - else - digitization_error = .5 * 257; - } - - for (y=0; ythis.palette, - NULL); - - in_pixel.red_sBIT = red_sBIT; - in_pixel.green_sBIT = green_sBIT; - in_pixel.blue_sBIT = blue_sBIT; - in_pixel.alpha_sBIT = alpha_sBIT; - in_pixel.have_tRNS = have_tRNS != 0; - - /* For error detection, below. */ - r = in_pixel.red; - g = in_pixel.green; - b = in_pixel.blue; - a = in_pixel.alpha; - - /* This applies the transforms to the input data, including output - * format operations which must be used when reading the output - * pixel that libpng produces. - */ - dp->transform_list->mod(dp->transform_list, &in_pixel, pp, dp); - - /* Read the output pixel and compare it to what we got, we don't - * use the error field here, so no need to update sBIT. in_pixel - * says whether we expect libpng to change the output format. - */ - image_pixel_init(&out_pixel, pRow, out_ct, out_bd, x, out_palette, - &in_pixel); - - /* We don't expect changes to the index here even if the bit depth is - * changed. - */ - if (in_ct == PNG_COLOR_TYPE_PALETTE && - out_ct == PNG_COLOR_TYPE_PALETTE) - { - if (in_pixel.palette_index != out_pixel.palette_index) - png_error(pp, "unexpected transformed palette index"); - } - - /* Check the colours for palette images too - in fact the palette could - * be separately verified itself in most cases. - */ - if (in_pixel.red != out_pixel.red) - transform_range_check(pp, r, g, b, a, in_pixel.red, in_pixel.redf, - out_pixel.red, sample_depth, in_pixel.rede, - dp->pm->limit + 1./(2*((1U<pm->limit + 1./(2*((1U<pm->limit + 1./(2*((1U<pm->limit + 1./(2*((1U<this.ps->validated = 1; -} - -static void PNGCBAPI -transform_end(png_structp ppIn, png_infop pi) -{ - png_const_structp pp = ppIn; - transform_display *dp = voidcast(transform_display*, - png_get_progressive_ptr(pp)); - - if (!dp->this.speed) - transform_image_validate(dp, pp, pi); - else - dp->this.ps->validated = 1; -} - -/* A single test run. */ -static void -transform_test(png_modifier *pmIn, png_uint_32 idIn, - const image_transform* transform_listIn, const char * const name) -{ - transform_display d; - context(&pmIn->this, fault); - - transform_display_init(&d, pmIn, idIn, transform_listIn); - - Try - { - size_t pos = 0; - png_structp pp; - png_infop pi; - char full_name[256]; - - /* Make sure the encoding fields are correct and enter the required - * modifications. - */ - transform_set_encoding(&d); - - /* Add any modifications required by the transform list. */ - d.transform_list->ini(d.transform_list, &d); - - /* Add the color space information, if any, to the name. */ - pos = safecat(full_name, sizeof full_name, pos, name); - pos = safecat_current_encoding(full_name, sizeof full_name, pos, d.pm); - - /* Get a png_struct for reading the image. */ - pp = set_modifier_for_read(d.pm, &pi, d.this.id, full_name); - standard_palette_init(&d.this); - -# if 0 - /* Logging (debugging only) */ - { - char buffer[256]; - - (void)store_message(&d.pm->this, pp, buffer, sizeof buffer, 0, - "running test"); - - fprintf(stderr, "%s\n", buffer); - } -# endif - - /* Introduce the correct read function. */ - if (d.pm->this.progressive) - { - /* Share the row function with the standard implementation. */ - png_set_progressive_read_fn(pp, &d, transform_info, progressive_row, - transform_end); - - /* Now feed data into the reader until we reach the end: */ - modifier_progressive_read(d.pm, pp, pi); - } - else - { - /* modifier_read expects a png_modifier* */ - png_set_read_fn(pp, d.pm, modifier_read); - - /* Check the header values: */ - png_read_info(pp, pi); - - /* Process the 'info' requirements. Only one image is generated */ - transform_info_imp(&d, pp, pi); - - sequential_row(&d.this, pp, pi, -1, 0); - - if (!d.this.speed) - transform_image_validate(&d, pp, pi); - else - d.this.ps->validated = 1; - } - - modifier_reset(d.pm); - } - - Catch(fault) - { - modifier_reset(voidcast(png_modifier*,(void*)fault)); - } -} - -/* The transforms: */ -#define ITSTRUCT(name) image_transform_##name -#define ITDATA(name) image_transform_data_##name -#define image_transform_ini image_transform_default_ini -#define IT(name)\ -static image_transform ITSTRUCT(name) =\ -{\ - #name,\ - 1, /*enable*/\ - &PT, /*list*/\ - 0, /*global_use*/\ - 0, /*local_use*/\ - 0, /*next*/\ - image_transform_ini,\ - image_transform_png_set_##name##_set,\ - image_transform_png_set_##name##_mod,\ - image_transform_png_set_##name##_add\ -} -#define PT ITSTRUCT(end) /* stores the previous transform */ - -/* To save code: */ -extern void image_transform_default_ini(const image_transform *this, - transform_display *that); /* silence GCC warnings */ - -void /* private, but almost always needed */ -image_transform_default_ini(const image_transform *this, - transform_display *that) -{ - this->next->ini(this->next, that); -} - -#ifdef PNG_READ_BACKGROUND_SUPPORTED -static int -image_transform_default_add(image_transform *this, - const image_transform **that, png_byte colour_type, png_byte bit_depth) -{ - UNUSED(colour_type) - UNUSED(bit_depth) - - this->next = *that; - *that = this; - - return 1; -} -#endif - -#ifdef PNG_READ_EXPAND_SUPPORTED -/* png_set_palette_to_rgb */ -static void -image_transform_png_set_palette_to_rgb_set(const image_transform *this, - transform_display *that, png_structp pp, png_infop pi) -{ - png_set_palette_to_rgb(pp); - this->next->set(this->next, that, pp, pi); -} - -static void -image_transform_png_set_palette_to_rgb_mod(const image_transform *this, - image_pixel *that, png_const_structp pp, - const transform_display *display) -{ - if (that->colour_type == PNG_COLOR_TYPE_PALETTE) - image_pixel_convert_PLTE(that); - - this->next->mod(this->next, that, pp, display); -} - -static int -image_transform_png_set_palette_to_rgb_add(image_transform *this, - const image_transform **that, png_byte colour_type, png_byte bit_depth) -{ - UNUSED(bit_depth) - - this->next = *that; - *that = this; - - return colour_type == PNG_COLOR_TYPE_PALETTE; -} - -IT(palette_to_rgb); -#undef PT -#define PT ITSTRUCT(palette_to_rgb) -#endif /* PNG_READ_EXPAND_SUPPORTED */ - -#ifdef PNG_READ_EXPAND_SUPPORTED -/* png_set_tRNS_to_alpha */ -static void -image_transform_png_set_tRNS_to_alpha_set(const image_transform *this, - transform_display *that, png_structp pp, png_infop pi) -{ - png_set_tRNS_to_alpha(pp); - - /* If there was a tRNS chunk that would get expanded and add an alpha - * channel is_transparent must be updated: - */ - if (that->this.has_tRNS) - that->this.is_transparent = 1; - - this->next->set(this->next, that, pp, pi); -} - -static void -image_transform_png_set_tRNS_to_alpha_mod(const image_transform *this, - image_pixel *that, png_const_structp pp, - const transform_display *display) -{ -#if PNG_LIBPNG_VER < 10700 - /* LIBPNG BUG: this always forces palette images to RGB. */ - if (that->colour_type == PNG_COLOR_TYPE_PALETTE) - image_pixel_convert_PLTE(that); -#endif - - /* This effectively does an 'expand' only if there is some transparency to - * convert to an alpha channel. - */ - if (that->have_tRNS) -# if PNG_LIBPNG_VER >= 10700 - if (that->colour_type != PNG_COLOR_TYPE_PALETTE && - (that->colour_type & PNG_COLOR_MASK_ALPHA) == 0) -# endif - image_pixel_add_alpha(that, &display->this, 0/*!for background*/); - -#if PNG_LIBPNG_VER < 10700 - /* LIBPNG BUG: otherwise libpng still expands to 8 bits! */ - else - { - if (that->bit_depth < 8) - that->bit_depth =8; - if (that->sample_depth < 8) - that->sample_depth = 8; - } -#endif - - this->next->mod(this->next, that, pp, display); -} - -static int -image_transform_png_set_tRNS_to_alpha_add(image_transform *this, - const image_transform **that, png_byte colour_type, png_byte bit_depth) -{ - UNUSED(bit_depth) - - this->next = *that; - *that = this; - - /* We don't know yet whether there will be a tRNS chunk, but we know that - * this transformation should do nothing if there already is an alpha - * channel. In addition, after the bug fix in 1.7.0, there is no longer - * any action on a palette image. - */ - return -# if PNG_LIBPNG_VER >= 10700 - colour_type != PNG_COLOR_TYPE_PALETTE && -# endif - (colour_type & PNG_COLOR_MASK_ALPHA) == 0; -} - -IT(tRNS_to_alpha); -#undef PT -#define PT ITSTRUCT(tRNS_to_alpha) -#endif /* PNG_READ_EXPAND_SUPPORTED */ - -#ifdef PNG_READ_GRAY_TO_RGB_SUPPORTED -/* png_set_gray_to_rgb */ -static void -image_transform_png_set_gray_to_rgb_set(const image_transform *this, - transform_display *that, png_structp pp, png_infop pi) -{ - png_set_gray_to_rgb(pp); - /* NOTE: this doesn't result in tRNS expansion. */ - this->next->set(this->next, that, pp, pi); -} - -static void -image_transform_png_set_gray_to_rgb_mod(const image_transform *this, - image_pixel *that, png_const_structp pp, - const transform_display *display) -{ - /* NOTE: we can actually pend the tRNS processing at this point because we - * can correctly recognize the original pixel value even though we have - * mapped the one gray channel to the three RGB ones, but in fact libpng - * doesn't do this, so we don't either. - */ - if ((that->colour_type & PNG_COLOR_MASK_COLOR) == 0 && that->have_tRNS) - image_pixel_add_alpha(that, &display->this, 0/*!for background*/); - - /* Simply expand the bit depth and alter the colour type as required. */ - if (that->colour_type == PNG_COLOR_TYPE_GRAY) - { - /* RGB images have a bit depth at least equal to '8' */ - if (that->bit_depth < 8) - that->sample_depth = that->bit_depth = 8; - - /* And just changing the colour type works here because the green and blue - * channels are being maintained in lock-step with the red/gray: - */ - that->colour_type = PNG_COLOR_TYPE_RGB; - } - - else if (that->colour_type == PNG_COLOR_TYPE_GRAY_ALPHA) - that->colour_type = PNG_COLOR_TYPE_RGB_ALPHA; - - this->next->mod(this->next, that, pp, display); -} - -static int -image_transform_png_set_gray_to_rgb_add(image_transform *this, - const image_transform **that, png_byte colour_type, png_byte bit_depth) -{ - UNUSED(bit_depth) - - this->next = *that; - *that = this; - - return (colour_type & PNG_COLOR_MASK_COLOR) == 0; -} - -IT(gray_to_rgb); -#undef PT -#define PT ITSTRUCT(gray_to_rgb) -#endif /* PNG_READ_GRAY_TO_RGB_SUPPORTED */ - -#ifdef PNG_READ_EXPAND_SUPPORTED -/* png_set_expand */ -static void -image_transform_png_set_expand_set(const image_transform *this, - transform_display *that, png_structp pp, png_infop pi) -{ - png_set_expand(pp); - - if (that->this.has_tRNS) - that->this.is_transparent = 1; - - this->next->set(this->next, that, pp, pi); -} - -static void -image_transform_png_set_expand_mod(const image_transform *this, - image_pixel *that, png_const_structp pp, - const transform_display *display) -{ - /* The general expand case depends on what the colour type is: */ - if (that->colour_type == PNG_COLOR_TYPE_PALETTE) - image_pixel_convert_PLTE(that); - else if (that->bit_depth < 8) /* grayscale */ - that->sample_depth = that->bit_depth = 8; - - if (that->have_tRNS) - image_pixel_add_alpha(that, &display->this, 0/*!for background*/); - - this->next->mod(this->next, that, pp, display); -} - -static int -image_transform_png_set_expand_add(image_transform *this, - const image_transform **that, png_byte colour_type, png_byte bit_depth) -{ - UNUSED(bit_depth) - - this->next = *that; - *that = this; - - /* 'expand' should do nothing for RGBA or GA input - no tRNS and the bit - * depth is at least 8 already. - */ - return (colour_type & PNG_COLOR_MASK_ALPHA) == 0; -} - -IT(expand); -#undef PT -#define PT ITSTRUCT(expand) -#endif /* PNG_READ_EXPAND_SUPPORTED */ - -#ifdef PNG_READ_EXPAND_SUPPORTED -/* png_set_expand_gray_1_2_4_to_8 - * Pre 1.7.0 LIBPNG BUG: this just does an 'expand' - */ -static void -image_transform_png_set_expand_gray_1_2_4_to_8_set( - const image_transform *this, transform_display *that, png_structp pp, - png_infop pi) -{ - png_set_expand_gray_1_2_4_to_8(pp); - /* NOTE: don't expect this to expand tRNS */ - this->next->set(this->next, that, pp, pi); -} - -static void -image_transform_png_set_expand_gray_1_2_4_to_8_mod( - const image_transform *this, image_pixel *that, png_const_structp pp, - const transform_display *display) -{ -#if PNG_LIBPNG_VER < 10700 - image_transform_png_set_expand_mod(this, that, pp, display); -#else - /* Only expand grayscale of bit depth less than 8: */ - if (that->colour_type == PNG_COLOR_TYPE_GRAY && - that->bit_depth < 8) - that->sample_depth = that->bit_depth = 8; - - this->next->mod(this->next, that, pp, display); -#endif /* 1.7 or later */ -} - -static int -image_transform_png_set_expand_gray_1_2_4_to_8_add(image_transform *this, - const image_transform **that, png_byte colour_type, png_byte bit_depth) -{ -#if PNG_LIBPNG_VER < 10700 - return image_transform_png_set_expand_add(this, that, colour_type, - bit_depth); -#else - UNUSED(bit_depth) - - this->next = *that; - *that = this; - - /* This should do nothing unless the color type is gray and the bit depth is - * less than 8: - */ - return colour_type == PNG_COLOR_TYPE_GRAY && bit_depth < 8; -#endif /* 1.7 or later */ -} - -IT(expand_gray_1_2_4_to_8); -#undef PT -#define PT ITSTRUCT(expand_gray_1_2_4_to_8) -#endif /* PNG_READ_EXPAND_SUPPORTED */ - -#ifdef PNG_READ_EXPAND_16_SUPPORTED -/* png_set_expand_16 */ -static void -image_transform_png_set_expand_16_set(const image_transform *this, - transform_display *that, png_structp pp, png_infop pi) -{ - png_set_expand_16(pp); - - /* NOTE: prior to 1.7 libpng does SET_EXPAND as well, so tRNS is expanded. */ -# if PNG_LIBPNG_VER < 10700 - if (that->this.has_tRNS) - that->this.is_transparent = 1; -# endif - - this->next->set(this->next, that, pp, pi); -} - -static void -image_transform_png_set_expand_16_mod(const image_transform *this, - image_pixel *that, png_const_structp pp, - const transform_display *display) -{ - /* Expect expand_16 to expand everything to 16 bits as a result of also - * causing 'expand' to happen. - */ - if (that->colour_type == PNG_COLOR_TYPE_PALETTE) - image_pixel_convert_PLTE(that); - - if (that->have_tRNS) - image_pixel_add_alpha(that, &display->this, 0/*!for background*/); - - if (that->bit_depth < 16) - that->sample_depth = that->bit_depth = 16; - - this->next->mod(this->next, that, pp, display); -} - -static int -image_transform_png_set_expand_16_add(image_transform *this, - const image_transform **that, png_byte colour_type, png_byte bit_depth) -{ - UNUSED(colour_type) - - this->next = *that; - *that = this; - - /* expand_16 does something unless the bit depth is already 16. */ - return bit_depth < 16; -} - -IT(expand_16); -#undef PT -#define PT ITSTRUCT(expand_16) -#endif /* PNG_READ_EXPAND_16_SUPPORTED */ - -#ifdef PNG_READ_SCALE_16_TO_8_SUPPORTED /* API added in 1.5.4 */ -/* png_set_scale_16 */ -static void -image_transform_png_set_scale_16_set(const image_transform *this, - transform_display *that, png_structp pp, png_infop pi) -{ - png_set_scale_16(pp); -# if PNG_LIBPNG_VER < 10700 - /* libpng will limit the gamma table size: */ - that->max_gamma_8 = PNG_MAX_GAMMA_8; -# endif - this->next->set(this->next, that, pp, pi); -} - -static void -image_transform_png_set_scale_16_mod(const image_transform *this, - image_pixel *that, png_const_structp pp, - const transform_display *display) -{ - if (that->bit_depth == 16) - { - that->sample_depth = that->bit_depth = 8; - if (that->red_sBIT > 8) that->red_sBIT = 8; - if (that->green_sBIT > 8) that->green_sBIT = 8; - if (that->blue_sBIT > 8) that->blue_sBIT = 8; - if (that->alpha_sBIT > 8) that->alpha_sBIT = 8; - } - - this->next->mod(this->next, that, pp, display); -} - -static int -image_transform_png_set_scale_16_add(image_transform *this, - const image_transform **that, png_byte colour_type, png_byte bit_depth) -{ - UNUSED(colour_type) - - this->next = *that; - *that = this; - - return bit_depth > 8; -} - -IT(scale_16); -#undef PT -#define PT ITSTRUCT(scale_16) -#endif /* PNG_READ_SCALE_16_TO_8_SUPPORTED (1.5.4 on) */ - -#ifdef PNG_READ_16_TO_8_SUPPORTED /* the default before 1.5.4 */ -/* png_set_strip_16 */ -static void -image_transform_png_set_strip_16_set(const image_transform *this, - transform_display *that, png_structp pp, png_infop pi) -{ - png_set_strip_16(pp); -# if PNG_LIBPNG_VER < 10700 - /* libpng will limit the gamma table size: */ - that->max_gamma_8 = PNG_MAX_GAMMA_8; -# endif - this->next->set(this->next, that, pp, pi); -} - -static void -image_transform_png_set_strip_16_mod(const image_transform *this, - image_pixel *that, png_const_structp pp, - const transform_display *display) -{ - if (that->bit_depth == 16) - { - that->sample_depth = that->bit_depth = 8; - if (that->red_sBIT > 8) that->red_sBIT = 8; - if (that->green_sBIT > 8) that->green_sBIT = 8; - if (that->blue_sBIT > 8) that->blue_sBIT = 8; - if (that->alpha_sBIT > 8) that->alpha_sBIT = 8; - - /* Prior to 1.5.4 png_set_strip_16 would use an 'accurate' method if this - * configuration option is set. From 1.5.4 the flag is never set and the - * 'scale' API (above) must be used. - */ -# ifdef PNG_READ_ACCURATE_SCALE_SUPPORTED -# if PNG_LIBPNG_VER >= 10504 -# error PNG_READ_ACCURATE_SCALE should not be set -# endif - - /* The strip 16 algorithm drops the low 8 bits rather than calculating - * 1/257, so we need to adjust the permitted errors appropriately: - * Notice that this is only relevant prior to the addition of the - * png_set_scale_16 API in 1.5.4 (but 1.5.4+ always defines the above!) - */ - { - const double d = (255-128.5)/65535; - that->rede += d; - that->greene += d; - that->bluee += d; - that->alphae += d; - } -# endif - } - - this->next->mod(this->next, that, pp, display); -} - -static int -image_transform_png_set_strip_16_add(image_transform *this, - const image_transform **that, png_byte colour_type, png_byte bit_depth) -{ - UNUSED(colour_type) - - this->next = *that; - *that = this; - - return bit_depth > 8; -} - -IT(strip_16); -#undef PT -#define PT ITSTRUCT(strip_16) -#endif /* PNG_READ_16_TO_8_SUPPORTED */ - -#ifdef PNG_READ_STRIP_ALPHA_SUPPORTED -/* png_set_strip_alpha */ -static void -image_transform_png_set_strip_alpha_set(const image_transform *this, - transform_display *that, png_structp pp, png_infop pi) -{ - png_set_strip_alpha(pp); - this->next->set(this->next, that, pp, pi); -} - -static void -image_transform_png_set_strip_alpha_mod(const image_transform *this, - image_pixel *that, png_const_structp pp, - const transform_display *display) -{ - if (that->colour_type == PNG_COLOR_TYPE_GRAY_ALPHA) - that->colour_type = PNG_COLOR_TYPE_GRAY; - else if (that->colour_type == PNG_COLOR_TYPE_RGB_ALPHA) - that->colour_type = PNG_COLOR_TYPE_RGB; - - that->have_tRNS = 0; - that->alphaf = 1; - - this->next->mod(this->next, that, pp, display); -} - -static int -image_transform_png_set_strip_alpha_add(image_transform *this, - const image_transform **that, png_byte colour_type, png_byte bit_depth) -{ - UNUSED(bit_depth) - - this->next = *that; - *that = this; - - return (colour_type & PNG_COLOR_MASK_ALPHA) != 0; -} - -IT(strip_alpha); -#undef PT -#define PT ITSTRUCT(strip_alpha) -#endif /* PNG_READ_STRIP_ALPHA_SUPPORTED */ - -#ifdef PNG_READ_RGB_TO_GRAY_SUPPORTED -/* png_set_rgb_to_gray(png_structp, int err_action, double red, double green) - * png_set_rgb_to_gray_fixed(png_structp, int err_action, png_fixed_point red, - * png_fixed_point green) - * png_get_rgb_to_gray_status - * - * The 'default' test here uses values known to be used inside libpng prior to - * 1.7.0: - * - * red: 6968 - * green: 23434 - * blue: 2366 - * - * These values are being retained for compatibility, along with the somewhat - * broken truncation calculation in the fast-and-inaccurate code path. Older - * versions of libpng will fail the accuracy tests below because they use the - * truncation algorithm everywhere. - */ -#define data ITDATA(rgb_to_gray) -static struct -{ - double gamma; /* File gamma to use in processing */ - - /* The following are the parameters for png_set_rgb_to_gray: */ -# ifdef PNG_FLOATING_POINT_SUPPORTED - double red_to_set; - double green_to_set; -# else - png_fixed_point red_to_set; - png_fixed_point green_to_set; -# endif - - /* The actual coefficients: */ - double red_coefficient; - double green_coefficient; - double blue_coefficient; - - /* Set if the coeefficients have been overridden. */ - int coefficients_overridden; -} data; - -#undef image_transform_ini -#define image_transform_ini image_transform_png_set_rgb_to_gray_ini -static void -image_transform_png_set_rgb_to_gray_ini(const image_transform *this, - transform_display *that) -{ - png_modifier *pm = that->pm; - const color_encoding *e = pm->current_encoding; - - UNUSED(this) - - /* Since we check the encoding this flag must be set: */ - pm->test_uses_encoding = 1; - - /* If 'e' is not NULL chromaticity information is present and either a cHRM - * or an sRGB chunk will be inserted. - */ - if (e != 0) - { - /* Coefficients come from the encoding, but may need to be normalized to a - * white point Y of 1.0 - */ - const double whiteY = e->red.Y + e->green.Y + e->blue.Y; - - data.red_coefficient = e->red.Y; - data.green_coefficient = e->green.Y; - data.blue_coefficient = e->blue.Y; - - if (whiteY != 1) - { - data.red_coefficient /= whiteY; - data.green_coefficient /= whiteY; - data.blue_coefficient /= whiteY; - } - } - - else - { - /* The default (built in) coeffcients, as above: */ -# if PNG_LIBPNG_VER < 10700 - data.red_coefficient = 6968 / 32768.; - data.green_coefficient = 23434 / 32768.; - data.blue_coefficient = 2366 / 32768.; -# else - data.red_coefficient = .2126; - data.green_coefficient = .7152; - data.blue_coefficient = .0722; -# endif - } - - data.gamma = pm->current_gamma; - - /* If not set then the calculations assume linear encoding (implicitly): */ - if (data.gamma == 0) - data.gamma = 1; - - /* The arguments to png_set_rgb_to_gray can override the coefficients implied - * by the color space encoding. If doing exhaustive checks do the override - * in each case, otherwise do it randomly. - */ - if (pm->test_exhaustive) - { - /* First time in coefficients_overridden is 0, the following sets it to 1, - * so repeat if it is set. If a test fails this may mean we subsequently - * skip a non-override test, ignore that. - */ - data.coefficients_overridden = !data.coefficients_overridden; - pm->repeat = data.coefficients_overridden != 0; - } - - else - data.coefficients_overridden = random_choice(); - - if (data.coefficients_overridden) - { - /* These values override the color encoding defaults, simply use random - * numbers. - */ - png_uint_32 ru; - double total; - - ru = random_u32(); - data.green_coefficient = total = (ru & 0xffff) / 65535.; - ru >>= 16; - data.red_coefficient = (1 - total) * (ru & 0xffff) / 65535.; - total += data.red_coefficient; - data.blue_coefficient = 1 - total; - -# ifdef PNG_FLOATING_POINT_SUPPORTED - data.red_to_set = data.red_coefficient; - data.green_to_set = data.green_coefficient; -# else - data.red_to_set = fix(data.red_coefficient); - data.green_to_set = fix(data.green_coefficient); -# endif - - /* The following just changes the error messages: */ - pm->encoding_ignored = 1; - } - - else - { - data.red_to_set = -1; - data.green_to_set = -1; - } - - /* Adjust the error limit in the png_modifier because of the larger errors - * produced in the digitization during the gamma handling. - */ - if (data.gamma != 1) /* Use gamma tables */ - { - if (that->this.bit_depth == 16 || pm->assume_16_bit_calculations) - { - /* The computations have the form: - * - * r * rc + g * gc + b * bc - * - * Each component of which is +/-1/65535 from the gamma_to_1 table - * lookup, resulting in a base error of +/-6. The gamma_from_1 - * conversion adds another +/-2 in the 16-bit case and - * +/-(1<<(15-PNG_MAX_GAMMA_8)) in the 8-bit case. - */ -# if PNG_LIBPNG_VER < 10700 - if (that->this.bit_depth < 16) - that->max_gamma_8 = PNG_MAX_GAMMA_8; -# endif - that->pm->limit += pow( - (that->this.bit_depth == 16 || that->max_gamma_8 > 14 ? - 8. : - 6. + (1<<(15-that->max_gamma_8)) - )/65535, data.gamma); - } - - else - { - /* Rounding to 8 bits in the linear space causes massive errors which - * will trigger the error check in transform_range_check. Fix that - * here by taking the gamma encoding into account. - * - * When DIGITIZE is set because a pre-1.7 version of libpng is being - * tested allow a bigger slack. - * - * NOTE: this number only affects the internal limit check in pngvalid, - * it has no effect on the limits applied to the libpng values. - */ -#if DIGITIZE - that->pm->limit += pow( 2.0/255, data.gamma); -#else - that->pm->limit += pow( 1.0/255, data.gamma); -#endif - } - } - - else - { - /* With no gamma correction a large error comes from the truncation of the - * calculation in the 8 bit case, allow for that here. - */ - if (that->this.bit_depth != 16 && !pm->assume_16_bit_calculations) - that->pm->limit += 4E-3; - } -} - -static void -image_transform_png_set_rgb_to_gray_set(const image_transform *this, - transform_display *that, png_structp pp, png_infop pi) -{ - int error_action = 1; /* no error, no defines in png.h */ - -# ifdef PNG_FLOATING_POINT_SUPPORTED - png_set_rgb_to_gray(pp, error_action, data.red_to_set, data.green_to_set); -# else - png_set_rgb_to_gray_fixed(pp, error_action, data.red_to_set, - data.green_to_set); -# endif - -# ifdef PNG_READ_cHRM_SUPPORTED - if (that->pm->current_encoding != 0) - { - /* We have an encoding so a cHRM chunk may have been set; if so then - * check that the libpng APIs give the correct (X,Y,Z) values within - * some margin of error for the round trip through the chromaticity - * form. - */ -# ifdef PNG_FLOATING_POINT_SUPPORTED -# define API_function png_get_cHRM_XYZ -# define API_form "FP" -# define API_type double -# define API_cvt(x) (x) -# else -# define API_function png_get_cHRM_XYZ_fixed -# define API_form "fixed" -# define API_type png_fixed_point -# define API_cvt(x) ((double)(x)/PNG_FP_1) -# endif - - API_type rX, gX, bX; - API_type rY, gY, bY; - API_type rZ, gZ, bZ; - - if ((API_function(pp, pi, &rX, &rY, &rZ, &gX, &gY, &gZ, &bX, &bY, &bZ) - & PNG_INFO_cHRM) != 0) - { - double maxe; - const char *el; - color_encoding e, o; - - /* Expect libpng to return a normalized result, but the original - * color space encoding may not be normalized. - */ - modifier_current_encoding(that->pm, &o); - normalize_color_encoding(&o); - - /* Sanity check the pngvalid code - the coefficients should match - * the normalized Y values of the encoding unless they were - * overridden. - */ - if (data.red_to_set == -1 && data.green_to_set == -1 && - (fabs(o.red.Y - data.red_coefficient) > DBL_EPSILON || - fabs(o.green.Y - data.green_coefficient) > DBL_EPSILON || - fabs(o.blue.Y - data.blue_coefficient) > DBL_EPSILON)) - png_error(pp, "internal pngvalid cHRM coefficient error"); - - /* Generate a colour space encoding. */ - e.gamma = o.gamma; /* not used */ - e.red.X = API_cvt(rX); - e.red.Y = API_cvt(rY); - e.red.Z = API_cvt(rZ); - e.green.X = API_cvt(gX); - e.green.Y = API_cvt(gY); - e.green.Z = API_cvt(gZ); - e.blue.X = API_cvt(bX); - e.blue.Y = API_cvt(bY); - e.blue.Z = API_cvt(bZ); - - /* This should match the original one from the png_modifier, within - * the range permitted by the libpng fixed point representation. - */ - maxe = 0; - el = "-"; /* Set to element name with error */ - -# define CHECK(col,x)\ - {\ - double err = fabs(o.col.x - e.col.x);\ - if (err > maxe)\ - {\ - maxe = err;\ - el = #col "(" #x ")";\ - }\ - } - - CHECK(red,X) - CHECK(red,Y) - CHECK(red,Z) - CHECK(green,X) - CHECK(green,Y) - CHECK(green,Z) - CHECK(blue,X) - CHECK(blue,Y) - CHECK(blue,Z) - - /* Here in both fixed and floating cases to check the values read - * from the cHRm chunk. PNG uses fixed point in the cHRM chunk, so - * we can't expect better than +/-.5E-5 on the result, allow 1E-5. - */ - if (maxe >= 1E-5) - { - size_t pos = 0; - char buffer[256]; - - pos = safecat(buffer, sizeof buffer, pos, API_form); - pos = safecat(buffer, sizeof buffer, pos, " cHRM "); - pos = safecat(buffer, sizeof buffer, pos, el); - pos = safecat(buffer, sizeof buffer, pos, " error: "); - pos = safecatd(buffer, sizeof buffer, pos, maxe, 7); - pos = safecat(buffer, sizeof buffer, pos, " "); - /* Print the color space without the gamma value: */ - pos = safecat_color_encoding(buffer, sizeof buffer, pos, &o, 0); - pos = safecat(buffer, sizeof buffer, pos, " -> "); - pos = safecat_color_encoding(buffer, sizeof buffer, pos, &e, 0); - - png_error(pp, buffer); - } - } - } -# endif /* READ_cHRM */ - - this->next->set(this->next, that, pp, pi); -} - -static void -image_transform_png_set_rgb_to_gray_mod(const image_transform *this, - image_pixel *that, png_const_structp pp, - const transform_display *display) -{ - if ((that->colour_type & PNG_COLOR_MASK_COLOR) != 0) - { - double gray, err; - -# if PNG_LIBPNG_VER < 10700 - if (that->colour_type == PNG_COLOR_TYPE_PALETTE) - image_pixel_convert_PLTE(that); -# endif - - /* Image now has RGB channels... */ -# if DIGITIZE - { - png_modifier *pm = display->pm; - unsigned int sample_depth = that->sample_depth; - unsigned int calc_depth = (pm->assume_16_bit_calculations ? 16 : - sample_depth); - unsigned int gamma_depth = - (sample_depth == 16 ? - display->max_gamma_8 : - (pm->assume_16_bit_calculations ? - display->max_gamma_8 : - sample_depth)); - int isgray; - double r, g, b; - double rlo, rhi, glo, ghi, blo, bhi, graylo, grayhi; - - /* Do this using interval arithmetic, otherwise it is too difficult to - * handle the errors correctly. - * - * To handle the gamma correction work out the upper and lower bounds - * of the digitized value. Assume rounding here - normally the values - * will be identical after this operation if there is only one - * transform, feel free to delete the png_error checks on this below in - * the future (this is just me trying to ensure it works!) - * - * Interval arithmetic is exact, but to implement it it must be - * possible to control the floating point implementation rounding mode. - * This cannot be done in ANSI-C, so instead I reduce the 'lo' values - * by DBL_EPSILON and increase the 'hi' values by the same. - */ -# define DD(v,d,r) (digitize(v*(1-DBL_EPSILON), d, r) * (1-DBL_EPSILON)) -# define DU(v,d,r) (digitize(v*(1+DBL_EPSILON), d, r) * (1+DBL_EPSILON)) - - r = rlo = rhi = that->redf; - rlo -= that->rede; - rlo = DD(rlo, calc_depth, 1/*round*/); - rhi += that->rede; - rhi = DU(rhi, calc_depth, 1/*round*/); - - g = glo = ghi = that->greenf; - glo -= that->greene; - glo = DD(glo, calc_depth, 1/*round*/); - ghi += that->greene; - ghi = DU(ghi, calc_depth, 1/*round*/); - - b = blo = bhi = that->bluef; - blo -= that->bluee; - blo = DD(blo, calc_depth, 1/*round*/); - bhi += that->bluee; - bhi = DU(bhi, calc_depth, 1/*round*/); - - isgray = r==g && g==b; - - if (data.gamma != 1) - { - const double power = 1/data.gamma; - const double abse = .5/(sample_depth == 16 ? 65535 : 255); - - /* If a gamma calculation is done it is done using lookup tables of - * precision gamma_depth, so the already digitized value above may - * need to be further digitized here. - */ - if (gamma_depth != calc_depth) - { - rlo = DD(rlo, gamma_depth, 0/*truncate*/); - rhi = DU(rhi, gamma_depth, 0/*truncate*/); - glo = DD(glo, gamma_depth, 0/*truncate*/); - ghi = DU(ghi, gamma_depth, 0/*truncate*/); - blo = DD(blo, gamma_depth, 0/*truncate*/); - bhi = DU(bhi, gamma_depth, 0/*truncate*/); - } - - /* 'abse' is the error in the gamma table calculation itself. */ - r = pow(r, power); - rlo = DD(pow(rlo, power)-abse, calc_depth, 1); - rhi = DU(pow(rhi, power)+abse, calc_depth, 1); - - g = pow(g, power); - glo = DD(pow(glo, power)-abse, calc_depth, 1); - ghi = DU(pow(ghi, power)+abse, calc_depth, 1); - - b = pow(b, power); - blo = DD(pow(blo, power)-abse, calc_depth, 1); - bhi = DU(pow(bhi, power)+abse, calc_depth, 1); - } - - /* Now calculate the actual gray values. Although the error in the - * coefficients depends on whether they were specified on the command - * line (in which case truncation to 15 bits happened) or not (rounding - * was used) the maximum error in an individual coefficient is always - * 2/32768, because even in the rounding case the requirement that - * coefficients add up to 32768 can cause a larger rounding error. - * - * The only time when rounding doesn't occur in 1.5.5 and later is when - * the non-gamma code path is used for less than 16 bit data. - */ - gray = r * data.red_coefficient + g * data.green_coefficient + - b * data.blue_coefficient; - - { - int do_round = data.gamma != 1 || calc_depth == 16; - const double ce = 2. / 32768; - - graylo = DD(rlo * (data.red_coefficient-ce) + - glo * (data.green_coefficient-ce) + - blo * (data.blue_coefficient-ce), calc_depth, do_round); - if (graylo > gray) /* always accept the right answer */ - graylo = gray; - - grayhi = DU(rhi * (data.red_coefficient+ce) + - ghi * (data.green_coefficient+ce) + - bhi * (data.blue_coefficient+ce), calc_depth, do_round); - if (grayhi < gray) - grayhi = gray; - } - - /* And invert the gamma. */ - if (data.gamma != 1) - { - const double power = data.gamma; - - /* And this happens yet again, shifting the values once more. */ - if (gamma_depth != sample_depth) - { - rlo = DD(rlo, gamma_depth, 0/*truncate*/); - rhi = DU(rhi, gamma_depth, 0/*truncate*/); - glo = DD(glo, gamma_depth, 0/*truncate*/); - ghi = DU(ghi, gamma_depth, 0/*truncate*/); - blo = DD(blo, gamma_depth, 0/*truncate*/); - bhi = DU(bhi, gamma_depth, 0/*truncate*/); - } - - gray = pow(gray, power); - graylo = DD(pow(graylo, power), sample_depth, 1); - grayhi = DU(pow(grayhi, power), sample_depth, 1); - } - -# undef DD -# undef DU - - /* Now the error can be calculated. - * - * If r==g==b because there is no overall gamma correction libpng - * currently preserves the original value. - */ - if (isgray) - err = (that->rede + that->greene + that->bluee)/3; - - else - { - err = fabs(grayhi-gray); - - if (fabs(gray - graylo) > err) - err = fabs(graylo-gray); - -#if !RELEASE_BUILD - /* Check that this worked: */ - if (err > pm->limit) - { - size_t pos = 0; - char buffer[128]; - - pos = safecat(buffer, sizeof buffer, pos, "rgb_to_gray error "); - pos = safecatd(buffer, sizeof buffer, pos, err, 6); - pos = safecat(buffer, sizeof buffer, pos, " exceeds limit "); - pos = safecatd(buffer, sizeof buffer, pos, pm->limit, 6); - png_warning(pp, buffer); - pm->limit = err; - } -#endif /* !RELEASE_BUILD */ - } - } -# else /* !DIGITIZE */ - { - double r = that->redf; - double re = that->rede; - double g = that->greenf; - double ge = that->greene; - double b = that->bluef; - double be = that->bluee; - -# if PNG_LIBPNG_VER < 10700 - /* The true gray case involves no math in earlier versions (not - * true, there was some if gamma correction was happening too.) - */ - if (r == g && r == b) - { - gray = r; - err = re; - if (err < ge) err = ge; - if (err < be) err = be; - } - - else -# endif /* before 1.7 */ - if (data.gamma == 1) - { - /* There is no need to do the conversions to and from linear space, - * so the calculation should be a lot more accurate. There is a - * built in error in the coefficients because they only have 15 bits - * and are adjusted to make sure they add up to 32768. This - * involves a integer calculation with truncation of the form: - * - * ((int)(coefficient * 100000) * 32768)/100000 - * - * This is done to the red and green coefficients (the ones - * provided to the API) then blue is calculated from them so the - * result adds up to 32768. In the worst case this can result in - * a -1 error in red and green and a +2 error in blue. Consequently - * the worst case in the calculation below is 2/32768 error. - * - * TODO: consider fixing this in libpng by rounding the calculation - * limiting the error to 1/32768. - * - * Handling this by adding 2/32768 here avoids needing to increase - * the global error limits to take this into account.) - */ - gray = r * data.red_coefficient + g * data.green_coefficient + - b * data.blue_coefficient; - err = re * data.red_coefficient + ge * data.green_coefficient + - be * data.blue_coefficient + 2./32768 + gray * 5 * DBL_EPSILON; - } - - else - { - /* The calculation happens in linear space, and this produces much - * wider errors in the encoded space. These are handled here by - * factoring the errors in to the calculation. There are two table - * lookups in the calculation and each introduces a quantization - * error defined by the table size. - */ - png_modifier *pm = display->pm; - double in_qe = (that->sample_depth > 8 ? .5/65535 : .5/255); - double out_qe = (that->sample_depth > 8 ? .5/65535 : - (pm->assume_16_bit_calculations ? .5/(1<max_gamma_8) : - .5/255)); - double rhi, ghi, bhi, grayhi; - double g1 = 1/data.gamma; - - rhi = r + re + in_qe; if (rhi > 1) rhi = 1; - r -= re + in_qe; if (r < 0) r = 0; - ghi = g + ge + in_qe; if (ghi > 1) ghi = 1; - g -= ge + in_qe; if (g < 0) g = 0; - bhi = b + be + in_qe; if (bhi > 1) bhi = 1; - b -= be + in_qe; if (b < 0) b = 0; - - r = pow(r, g1)*(1-DBL_EPSILON); rhi = pow(rhi, g1)*(1+DBL_EPSILON); - g = pow(g, g1)*(1-DBL_EPSILON); ghi = pow(ghi, g1)*(1+DBL_EPSILON); - b = pow(b, g1)*(1-DBL_EPSILON); bhi = pow(bhi, g1)*(1+DBL_EPSILON); - - /* Work out the lower and upper bounds for the gray value in the - * encoded space, then work out an average and error. Remove the - * previously added input quantization error at this point. - */ - gray = r * data.red_coefficient + g * data.green_coefficient + - b * data.blue_coefficient - 2./32768 - out_qe; - if (gray <= 0) - gray = 0; - else - { - gray *= (1 - 6 * DBL_EPSILON); - gray = pow(gray, data.gamma) * (1-DBL_EPSILON); - } - - grayhi = rhi * data.red_coefficient + ghi * data.green_coefficient + - bhi * data.blue_coefficient + 2./32768 + out_qe; - grayhi *= (1 + 6 * DBL_EPSILON); - if (grayhi >= 1) - grayhi = 1; - else - grayhi = pow(grayhi, data.gamma) * (1+DBL_EPSILON); - - err = (grayhi - gray) / 2; - gray = (grayhi + gray) / 2; - - if (err <= in_qe) - err = gray * DBL_EPSILON; - - else - err -= in_qe; - -#if !RELEASE_BUILD - /* Validate that the error is within limits (this has caused - * problems before, it's much easier to detect them here.) - */ - if (err > pm->limit) - { - size_t pos = 0; - char buffer[128]; - - pos = safecat(buffer, sizeof buffer, pos, "rgb_to_gray error "); - pos = safecatd(buffer, sizeof buffer, pos, err, 6); - pos = safecat(buffer, sizeof buffer, pos, " exceeds limit "); - pos = safecatd(buffer, sizeof buffer, pos, pm->limit, 6); - png_warning(pp, buffer); - pm->limit = err; - } -#endif /* !RELEASE_BUILD */ - } - } -# endif /* !DIGITIZE */ - - that->bluef = that->greenf = that->redf = gray; - that->bluee = that->greene = that->rede = err; - - /* The sBIT is the minimum of the three colour channel sBITs. */ - if (that->red_sBIT > that->green_sBIT) - that->red_sBIT = that->green_sBIT; - if (that->red_sBIT > that->blue_sBIT) - that->red_sBIT = that->blue_sBIT; - that->blue_sBIT = that->green_sBIT = that->red_sBIT; - - /* And remove the colour bit in the type: */ - if (that->colour_type == PNG_COLOR_TYPE_RGB) - that->colour_type = PNG_COLOR_TYPE_GRAY; - else if (that->colour_type == PNG_COLOR_TYPE_RGB_ALPHA) - that->colour_type = PNG_COLOR_TYPE_GRAY_ALPHA; - } - - this->next->mod(this->next, that, pp, display); -} - -static int -image_transform_png_set_rgb_to_gray_add(image_transform *this, - const image_transform **that, png_byte colour_type, png_byte bit_depth) -{ - UNUSED(bit_depth) - - this->next = *that; - *that = this; - - return (colour_type & PNG_COLOR_MASK_COLOR) != 0; -} - -#undef data -IT(rgb_to_gray); -#undef PT -#define PT ITSTRUCT(rgb_to_gray) -#undef image_transform_ini -#define image_transform_ini image_transform_default_ini -#endif /* PNG_READ_RGB_TO_GRAY_SUPPORTED */ - -#ifdef PNG_READ_BACKGROUND_SUPPORTED -/* png_set_background(png_structp, png_const_color_16p background_color, - * int background_gamma_code, int need_expand, double background_gamma) - * png_set_background_fixed(png_structp, png_const_color_16p background_color, - * int background_gamma_code, int need_expand, - * png_fixed_point background_gamma) - * - * This ignores the gamma (at present.) -*/ -#define data ITDATA(background) -static image_pixel data; - -static void -image_transform_png_set_background_set(const image_transform *this, - transform_display *that, png_structp pp, png_infop pi) -{ - png_byte colour_type, bit_depth; - png_byte random_bytes[8]; /* 8 bytes - 64 bits - the biggest pixel */ - int expand; - png_color_16 back; - - /* We need a background colour, because we don't know exactly what transforms - * have been set we have to supply the colour in the original file format and - * so we need to know what that is! The background colour is stored in the - * transform_display. - */ - R8(random_bytes); - - /* Read the random value, for colour type 3 the background colour is actually - * expressed as a 24bit rgb, not an index. - */ - colour_type = that->this.colour_type; - if (colour_type == 3) - { - colour_type = PNG_COLOR_TYPE_RGB; - bit_depth = 8; - expand = 0; /* passing in an RGB not a pixel index */ - } - - else - { - if (that->this.has_tRNS) - that->this.is_transparent = 1; - - bit_depth = that->this.bit_depth; - expand = 1; - } - - image_pixel_init(&data, random_bytes, colour_type, - bit_depth, 0/*x*/, 0/*unused: palette*/, NULL/*format*/); - - /* Extract the background colour from this image_pixel, but make sure the - * unused fields of 'back' are garbage. - */ - R8(back); - - if (colour_type & PNG_COLOR_MASK_COLOR) - { - back.red = (png_uint_16)data.red; - back.green = (png_uint_16)data.green; - back.blue = (png_uint_16)data.blue; - } - - else - back.gray = (png_uint_16)data.red; - -#ifdef PNG_FLOATING_POINT_SUPPORTED - png_set_background(pp, &back, PNG_BACKGROUND_GAMMA_FILE, expand, 0); -#else - png_set_background_fixed(pp, &back, PNG_BACKGROUND_GAMMA_FILE, expand, 0); -#endif - - this->next->set(this->next, that, pp, pi); -} - -static void -image_transform_png_set_background_mod(const image_transform *this, - image_pixel *that, png_const_structp pp, - const transform_display *display) -{ - /* Check for tRNS first: */ - if (that->have_tRNS && that->colour_type != PNG_COLOR_TYPE_PALETTE) - image_pixel_add_alpha(that, &display->this, 1/*for background*/); - - /* This is only necessary if the alpha value is less than 1. */ - if (that->alphaf < 1) - { - /* Now we do the background calculation without any gamma correction. */ - if (that->alphaf <= 0) - { - that->redf = data.redf; - that->greenf = data.greenf; - that->bluef = data.bluef; - - that->rede = data.rede; - that->greene = data.greene; - that->bluee = data.bluee; - - that->red_sBIT= data.red_sBIT; - that->green_sBIT= data.green_sBIT; - that->blue_sBIT= data.blue_sBIT; - } - - else /* 0 < alpha < 1 */ - { - double alf = 1 - that->alphaf; - - that->redf = that->redf * that->alphaf + data.redf * alf; - that->rede = that->rede * that->alphaf + data.rede * alf + - DBL_EPSILON; - that->greenf = that->greenf * that->alphaf + data.greenf * alf; - that->greene = that->greene * that->alphaf + data.greene * alf + - DBL_EPSILON; - that->bluef = that->bluef * that->alphaf + data.bluef * alf; - that->bluee = that->bluee * that->alphaf + data.bluee * alf + - DBL_EPSILON; - } - - /* Remove the alpha type and set the alpha (not in that order.) */ - that->alphaf = 1; - that->alphae = 0; - } - - if (that->colour_type == PNG_COLOR_TYPE_RGB_ALPHA) - that->colour_type = PNG_COLOR_TYPE_RGB; - else if (that->colour_type == PNG_COLOR_TYPE_GRAY_ALPHA) - that->colour_type = PNG_COLOR_TYPE_GRAY; - /* PNG_COLOR_TYPE_PALETTE is not changed */ - - this->next->mod(this->next, that, pp, display); -} - -#define image_transform_png_set_background_add image_transform_default_add - -#undef data -IT(background); -#undef PT -#define PT ITSTRUCT(background) -#endif /* PNG_READ_BACKGROUND_SUPPORTED */ - -/* png_set_quantize(png_structp, png_colorp palette, int num_palette, - * int maximum_colors, png_const_uint_16p histogram, int full_quantize) - * - * Very difficult to validate this! - */ -/*NOTE: TBD NYI */ - -/* The data layout transforms are handled by swapping our own channel data, - * necessarily these need to happen at the end of the transform list because the - * semantic of the channels changes after these are executed. Some of these, - * like set_shift and set_packing, can't be done at present because they change - * the layout of the data at the sub-sample level so sample() won't get the - * right answer. - */ -/* png_set_invert_alpha */ -#ifdef PNG_READ_INVERT_ALPHA_SUPPORTED -/* Invert the alpha channel - * - * png_set_invert_alpha(png_structrp png_ptr) - */ -static void -image_transform_png_set_invert_alpha_set(const image_transform *this, - transform_display *that, png_structp pp, png_infop pi) -{ - png_set_invert_alpha(pp); - this->next->set(this->next, that, pp, pi); -} - -static void -image_transform_png_set_invert_alpha_mod(const image_transform *this, - image_pixel *that, png_const_structp pp, - const transform_display *display) -{ - if (that->colour_type & 4) - that->alpha_inverted = 1; - - this->next->mod(this->next, that, pp, display); -} - -static int -image_transform_png_set_invert_alpha_add(image_transform *this, - const image_transform **that, png_byte colour_type, png_byte bit_depth) -{ - UNUSED(bit_depth) - - this->next = *that; - *that = this; - - /* Only has an effect on pixels with alpha: */ - return (colour_type & 4) != 0; -} - -IT(invert_alpha); -#undef PT -#define PT ITSTRUCT(invert_alpha) - -#endif /* PNG_READ_INVERT_ALPHA_SUPPORTED */ - -/* png_set_bgr */ -#ifdef PNG_READ_BGR_SUPPORTED -/* Swap R,G,B channels to order B,G,R. - * - * png_set_bgr(png_structrp png_ptr) - * - * This only has an effect on RGB and RGBA pixels. - */ -static void -image_transform_png_set_bgr_set(const image_transform *this, - transform_display *that, png_structp pp, png_infop pi) -{ - png_set_bgr(pp); - this->next->set(this->next, that, pp, pi); -} - -static void -image_transform_png_set_bgr_mod(const image_transform *this, - image_pixel *that, png_const_structp pp, - const transform_display *display) -{ - if (that->colour_type == PNG_COLOR_TYPE_RGB || - that->colour_type == PNG_COLOR_TYPE_RGBA) - that->swap_rgb = 1; - - this->next->mod(this->next, that, pp, display); -} - -static int -image_transform_png_set_bgr_add(image_transform *this, - const image_transform **that, png_byte colour_type, png_byte bit_depth) -{ - UNUSED(bit_depth) - - this->next = *that; - *that = this; - - return colour_type == PNG_COLOR_TYPE_RGB || - colour_type == PNG_COLOR_TYPE_RGBA; -} - -IT(bgr); -#undef PT -#define PT ITSTRUCT(bgr) - -#endif /* PNG_READ_BGR_SUPPORTED */ - -/* png_set_swap_alpha */ -#ifdef PNG_READ_SWAP_ALPHA_SUPPORTED -/* Put the alpha channel first. - * - * png_set_swap_alpha(png_structrp png_ptr) - * - * This only has an effect on GA and RGBA pixels. - */ -static void -image_transform_png_set_swap_alpha_set(const image_transform *this, - transform_display *that, png_structp pp, png_infop pi) -{ - png_set_swap_alpha(pp); - this->next->set(this->next, that, pp, pi); -} - -static void -image_transform_png_set_swap_alpha_mod(const image_transform *this, - image_pixel *that, png_const_structp pp, - const transform_display *display) -{ - if (that->colour_type == PNG_COLOR_TYPE_GA || - that->colour_type == PNG_COLOR_TYPE_RGBA) - that->alpha_first = 1; - - this->next->mod(this->next, that, pp, display); -} - -static int -image_transform_png_set_swap_alpha_add(image_transform *this, - const image_transform **that, png_byte colour_type, png_byte bit_depth) -{ - UNUSED(bit_depth) - - this->next = *that; - *that = this; - - return colour_type == PNG_COLOR_TYPE_GA || - colour_type == PNG_COLOR_TYPE_RGBA; -} - -IT(swap_alpha); -#undef PT -#define PT ITSTRUCT(swap_alpha) - -#endif /* PNG_READ_SWAP_ALPHA_SUPPORTED */ - -/* png_set_swap */ -#ifdef PNG_READ_SWAP_SUPPORTED -/* Byte swap 16-bit components. - * - * png_set_swap(png_structrp png_ptr) - */ -static void -image_transform_png_set_swap_set(const image_transform *this, - transform_display *that, png_structp pp, png_infop pi) -{ - png_set_swap(pp); - this->next->set(this->next, that, pp, pi); -} - -static void -image_transform_png_set_swap_mod(const image_transform *this, - image_pixel *that, png_const_structp pp, - const transform_display *display) -{ - if (that->bit_depth == 16) - that->swap16 = 1; - - this->next->mod(this->next, that, pp, display); -} - -static int -image_transform_png_set_swap_add(image_transform *this, - const image_transform **that, png_byte colour_type, png_byte bit_depth) -{ - UNUSED(colour_type) - - this->next = *that; - *that = this; - - return bit_depth == 16; -} - -IT(swap); -#undef PT -#define PT ITSTRUCT(swap) - -#endif /* PNG_READ_SWAP_SUPPORTED */ - -#ifdef PNG_READ_FILLER_SUPPORTED -/* Add a filler byte to 8-bit Gray or 24-bit RGB images. - * - * png_set_filler, (png_structp png_ptr, png_uint_32 filler, int flags)); - * - * Flags: - * - * PNG_FILLER_BEFORE - * PNG_FILLER_AFTER - */ -#define data ITDATA(filler) -static struct -{ - png_uint_32 filler; - int flags; -} data; - -static void -image_transform_png_set_filler_set(const image_transform *this, - transform_display *that, png_structp pp, png_infop pi) -{ - /* Need a random choice for 'before' and 'after' as well as for the - * filler. The 'filler' value has all 32 bits set, but only bit_depth - * will be used. At this point we don't know bit_depth. - */ - data.filler = random_u32(); - data.flags = random_choice(); - - png_set_filler(pp, data.filler, data.flags); - - /* The standard display handling stuff also needs to know that - * there is a filler, so set that here. - */ - that->this.filler = 1; - - this->next->set(this->next, that, pp, pi); -} - -static void -image_transform_png_set_filler_mod(const image_transform *this, - image_pixel *that, png_const_structp pp, - const transform_display *display) -{ - if (that->bit_depth >= 8 && - (that->colour_type == PNG_COLOR_TYPE_RGB || - that->colour_type == PNG_COLOR_TYPE_GRAY)) - { - unsigned int max = (1U << that->bit_depth)-1; - that->alpha = data.filler & max; - that->alphaf = ((double)that->alpha) / max; - that->alphae = 0; - - /* The filler has been stored in the alpha channel, we must record - * that this has been done for the checking later on, the color - * type is faked to have an alpha channel, but libpng won't report - * this; the app has to know the extra channel is there and this - * was recording in standard_display::filler above. - */ - that->colour_type |= 4; /* alpha added */ - that->alpha_first = data.flags == PNG_FILLER_BEFORE; - } - - this->next->mod(this->next, that, pp, display); -} - -static int -image_transform_png_set_filler_add(image_transform *this, - const image_transform **that, png_byte colour_type, png_byte bit_depth) -{ - this->next = *that; - *that = this; - - return bit_depth >= 8 && (colour_type == PNG_COLOR_TYPE_RGB || - colour_type == PNG_COLOR_TYPE_GRAY); -} - -#undef data -IT(filler); -#undef PT -#define PT ITSTRUCT(filler) - -/* png_set_add_alpha, (png_structp png_ptr, png_uint_32 filler, int flags)); */ -/* Add an alpha byte to 8-bit Gray or 24-bit RGB images. */ -#define data ITDATA(add_alpha) -static struct -{ - png_uint_32 filler; - int flags; -} data; - -static void -image_transform_png_set_add_alpha_set(const image_transform *this, - transform_display *that, png_structp pp, png_infop pi) -{ - /* Need a random choice for 'before' and 'after' as well as for the - * filler. The 'filler' value has all 32 bits set, but only bit_depth - * will be used. At this point we don't know bit_depth. - */ - data.filler = random_u32(); - data.flags = random_choice(); - - png_set_add_alpha(pp, data.filler, data.flags); - this->next->set(this->next, that, pp, pi); -} - -static void -image_transform_png_set_add_alpha_mod(const image_transform *this, - image_pixel *that, png_const_structp pp, - const transform_display *display) -{ - if (that->bit_depth >= 8 && - (that->colour_type == PNG_COLOR_TYPE_RGB || - that->colour_type == PNG_COLOR_TYPE_GRAY)) - { - unsigned int max = (1U << that->bit_depth)-1; - that->alpha = data.filler & max; - that->alphaf = ((double)that->alpha) / max; - that->alphae = 0; - - that->colour_type |= 4; /* alpha added */ - that->alpha_first = data.flags == PNG_FILLER_BEFORE; - } - - this->next->mod(this->next, that, pp, display); -} - -static int -image_transform_png_set_add_alpha_add(image_transform *this, - const image_transform **that, png_byte colour_type, png_byte bit_depth) -{ - this->next = *that; - *that = this; - - return bit_depth >= 8 && (colour_type == PNG_COLOR_TYPE_RGB || - colour_type == PNG_COLOR_TYPE_GRAY); -} - -#undef data -IT(add_alpha); -#undef PT -#define PT ITSTRUCT(add_alpha) - -#endif /* PNG_READ_FILLER_SUPPORTED */ - -/* png_set_packing */ -#ifdef PNG_READ_PACK_SUPPORTED -/* Use 1 byte per pixel in 1, 2, or 4-bit depth files. - * - * png_set_packing(png_structrp png_ptr) - * - * This should only affect grayscale and palette images with less than 8 bits - * per pixel. - */ -static void -image_transform_png_set_packing_set(const image_transform *this, - transform_display *that, png_structp pp, png_infop pi) -{ - png_set_packing(pp); - that->unpacked = 1; - this->next->set(this->next, that, pp, pi); -} - -static void -image_transform_png_set_packing_mod(const image_transform *this, - image_pixel *that, png_const_structp pp, - const transform_display *display) -{ - /* The general expand case depends on what the colour type is, - * low bit-depth pixel values are unpacked into bytes without - * scaling, so sample_depth is not changed. - */ - if (that->bit_depth < 8) /* grayscale or palette */ - that->bit_depth = 8; - - this->next->mod(this->next, that, pp, display); -} - -static int -image_transform_png_set_packing_add(image_transform *this, - const image_transform **that, png_byte colour_type, png_byte bit_depth) -{ - UNUSED(colour_type) - - this->next = *that; - *that = this; - - /* Nothing should happen unless the bit depth is less than 8: */ - return bit_depth < 8; -} - -IT(packing); -#undef PT -#define PT ITSTRUCT(packing) - -#endif /* PNG_READ_PACK_SUPPORTED */ - -/* png_set_packswap */ -#ifdef PNG_READ_PACKSWAP_SUPPORTED -/* Swap pixels packed into bytes; reverses the order on screen so that - * the high order bits correspond to the rightmost pixels. - * - * png_set_packswap(png_structrp png_ptr) - */ -static void -image_transform_png_set_packswap_set(const image_transform *this, - transform_display *that, png_structp pp, png_infop pi) -{ - png_set_packswap(pp); - that->this.littleendian = 1; - this->next->set(this->next, that, pp, pi); -} - -static void -image_transform_png_set_packswap_mod(const image_transform *this, - image_pixel *that, png_const_structp pp, - const transform_display *display) -{ - if (that->bit_depth < 8) - that->littleendian = 1; - - this->next->mod(this->next, that, pp, display); -} - -static int -image_transform_png_set_packswap_add(image_transform *this, - const image_transform **that, png_byte colour_type, png_byte bit_depth) -{ - UNUSED(colour_type) - - this->next = *that; - *that = this; - - return bit_depth < 8; -} - -IT(packswap); -#undef PT -#define PT ITSTRUCT(packswap) - -#endif /* PNG_READ_PACKSWAP_SUPPORTED */ - - -/* png_set_invert_mono */ -#ifdef PNG_READ_INVERT_MONO_SUPPORTED -/* Invert the gray channel - * - * png_set_invert_mono(png_structrp png_ptr) - */ -static void -image_transform_png_set_invert_mono_set(const image_transform *this, - transform_display *that, png_structp pp, png_infop pi) -{ - png_set_invert_mono(pp); - this->next->set(this->next, that, pp, pi); -} - -static void -image_transform_png_set_invert_mono_mod(const image_transform *this, - image_pixel *that, png_const_structp pp, - const transform_display *display) -{ - if (that->colour_type & 4) - that->mono_inverted = 1; - - this->next->mod(this->next, that, pp, display); -} - -static int -image_transform_png_set_invert_mono_add(image_transform *this, - const image_transform **that, png_byte colour_type, png_byte bit_depth) -{ - UNUSED(bit_depth) - - this->next = *that; - *that = this; - - /* Only has an effect on pixels with no colour: */ - return (colour_type & 2) == 0; -} - -IT(invert_mono); -#undef PT -#define PT ITSTRUCT(invert_mono) - -#endif /* PNG_READ_INVERT_MONO_SUPPORTED */ - -#ifdef PNG_READ_SHIFT_SUPPORTED -/* png_set_shift(png_structp, png_const_color_8p true_bits) - * - * The output pixels will be shifted by the given true_bits - * values. - */ -#define data ITDATA(shift) -static png_color_8 data; - -static void -image_transform_png_set_shift_set(const image_transform *this, - transform_display *that, png_structp pp, png_infop pi) -{ - /* Get a random set of shifts. The shifts need to do something - * to test the transform, so they are limited to the bit depth - * of the input image. Notice that in the following the 'gray' - * field is randomized independently. This acts as a check that - * libpng does use the correct field. - */ - unsigned int depth = that->this.bit_depth; - - data.red = (png_byte)/*SAFE*/(random_mod(depth)+1); - data.green = (png_byte)/*SAFE*/(random_mod(depth)+1); - data.blue = (png_byte)/*SAFE*/(random_mod(depth)+1); - data.gray = (png_byte)/*SAFE*/(random_mod(depth)+1); - data.alpha = (png_byte)/*SAFE*/(random_mod(depth)+1); - - png_set_shift(pp, &data); - this->next->set(this->next, that, pp, pi); -} - -static void -image_transform_png_set_shift_mod(const image_transform *this, - image_pixel *that, png_const_structp pp, - const transform_display *display) -{ - /* Copy the correct values into the sBIT fields, libpng does not do - * anything to palette data: - */ - if (that->colour_type != PNG_COLOR_TYPE_PALETTE) - { - that->sig_bits = 1; - - /* The sBIT fields are reset to the values previously sent to - * png_set_shift according to the colour type. - * does. - */ - if (that->colour_type & 2) /* RGB channels */ - { - that->red_sBIT = data.red; - that->green_sBIT = data.green; - that->blue_sBIT = data.blue; - } - - else /* One grey channel */ - that->red_sBIT = that->green_sBIT = that->blue_sBIT = data.gray; - - that->alpha_sBIT = data.alpha; - } - - this->next->mod(this->next, that, pp, display); -} - -static int -image_transform_png_set_shift_add(image_transform *this, - const image_transform **that, png_byte colour_type, png_byte bit_depth) -{ - UNUSED(bit_depth) - - this->next = *that; - *that = this; - - return colour_type != PNG_COLOR_TYPE_PALETTE; -} - -IT(shift); -#undef PT -#define PT ITSTRUCT(shift) - -#endif /* PNG_READ_SHIFT_SUPPORTED */ - -#ifdef THIS_IS_THE_PROFORMA -static void -image_transform_png_set_@_set(const image_transform *this, - transform_display *that, png_structp pp, png_infop pi) -{ - png_set_@(pp); - this->next->set(this->next, that, pp, pi); -} - -static void -image_transform_png_set_@_mod(const image_transform *this, - image_pixel *that, png_const_structp pp, - const transform_display *display) -{ - this->next->mod(this->next, that, pp, display); -} - -static int -image_transform_png_set_@_add(image_transform *this, - const image_transform **that, png_byte colour_type, png_byte bit_depth) -{ - this->next = *that; - *that = this; - - return 1; -} - -IT(@); -#endif - - -/* This may just be 'end' if all the transforms are disabled! */ -static image_transform *const image_transform_first = &PT; - -static void -transform_enable(const char *name) -{ - /* Everything starts out enabled, so if we see an 'enable' disabled - * everything else the first time round. - */ - static int all_disabled = 0; - int found_it = 0; - image_transform *list = image_transform_first; - - while (list != &image_transform_end) - { - if (strcmp(list->name, name) == 0) - { - list->enable = 1; - found_it = 1; - } - else if (!all_disabled) - list->enable = 0; - - list = list->list; - } - - all_disabled = 1; - - if (!found_it) - { - fprintf(stderr, "pngvalid: --transform-enable=%s: unknown transform\n", - name); - exit(99); - } -} - -static void -transform_disable(const char *name) -{ - image_transform *list = image_transform_first; - - while (list != &image_transform_end) - { - if (strcmp(list->name, name) == 0) - { - list->enable = 0; - return; - } - - list = list->list; - } - - fprintf(stderr, "pngvalid: --transform-disable=%s: unknown transform\n", - name); - exit(99); -} - -static void -image_transform_reset_count(void) -{ - image_transform *next = image_transform_first; - int count = 0; - - while (next != &image_transform_end) - { - next->local_use = 0; - next->next = 0; - next = next->list; - ++count; - } - - /* This can only happen if we every have more than 32 transforms (excluding - * the end) in the list. - */ - if (count > 32) abort(); -} - -static int -image_transform_test_counter(png_uint_32 counter, unsigned int max) -{ - /* Test the list to see if there is any point contining, given a current - * counter and a 'max' value. - */ - image_transform *next = image_transform_first; - - while (next != &image_transform_end) - { - /* For max 0 or 1 continue until the counter overflows: */ - counter >>= 1; - - /* Continue if any entry hasn't reacked the max. */ - if (max > 1 && next->local_use < max) - return 1; - next = next->list; - } - - return max <= 1 && counter == 0; -} - -static png_uint_32 -image_transform_add(const image_transform **this, unsigned int max, - png_uint_32 counter, char *name, size_t sizeof_name, size_t *pos, - png_byte colour_type, png_byte bit_depth) -{ - for (;;) /* until we manage to add something */ - { - png_uint_32 mask; - image_transform *list; - - /* Find the next counter value, if the counter is zero this is the start - * of the list. This routine always returns the current counter (not the - * next) so it returns 0 at the end and expects 0 at the beginning. - */ - if (counter == 0) /* first time */ - { - image_transform_reset_count(); - if (max <= 1) - counter = 1; - else - counter = random_32(); - } - else /* advance the counter */ - { - switch (max) - { - case 0: ++counter; break; - case 1: counter <<= 1; break; - default: counter = random_32(); break; - } - } - - /* Now add all these items, if possible */ - *this = &image_transform_end; - list = image_transform_first; - mask = 1; - - /* Go through the whole list adding anything that the counter selects: */ - while (list != &image_transform_end) - { - if ((counter & mask) != 0 && list->enable && - (max == 0 || list->local_use < max)) - { - /* Candidate to add: */ - if (list->add(list, this, colour_type, bit_depth) || max == 0) - { - /* Added, so add to the name too. */ - *pos = safecat(name, sizeof_name, *pos, " +"); - *pos = safecat(name, sizeof_name, *pos, list->name); - } - - else - { - /* Not useful and max>0, so remove it from *this: */ - *this = list->next; - list->next = 0; - - /* And, since we know it isn't useful, stop it being added again - * in this run: - */ - list->local_use = max; - } - } - - mask <<= 1; - list = list->list; - } - - /* Now if anything was added we have something to do. */ - if (*this != &image_transform_end) - return counter; - - /* Nothing added, but was there anything in there to add? */ - if (!image_transform_test_counter(counter, max)) - return 0; - } -} - -static void -perform_transform_test(png_modifier *pm) -{ - png_byte colour_type = 0; - png_byte bit_depth = 0; - unsigned int palette_number = 0; - - while (next_format(&colour_type, &bit_depth, &palette_number, pm->test_lbg, - pm->test_tRNS)) - { - png_uint_32 counter = 0; - size_t base_pos; - char name[64]; - - base_pos = safecat(name, sizeof name, 0, "transform:"); - - for (;;) - { - size_t pos = base_pos; - const image_transform *list = 0; - - /* 'max' is currently hardwired to '1'; this should be settable on the - * command line. - */ - counter = image_transform_add(&list, 1/*max*/, counter, - name, sizeof name, &pos, colour_type, bit_depth); - - if (counter == 0) - break; - - /* The command line can change this to checking interlaced images. */ - do - { - pm->repeat = 0; - transform_test(pm, FILEID(colour_type, bit_depth, palette_number, - pm->interlace_type, 0, 0, 0), list, name); - - if (fail(pm)) - return; - } - while (pm->repeat); - } - } -} -#endif /* PNG_READ_TRANSFORMS_SUPPORTED */ - -/********************************* GAMMA TESTS ********************************/ -#ifdef PNG_READ_GAMMA_SUPPORTED -/* Reader callbacks and implementations, where they differ from the standard - * ones. - */ -typedef struct gamma_display -{ - standard_display this; - - /* Parameters */ - png_modifier* pm; - double file_gamma; - double screen_gamma; - double background_gamma; - png_byte sbit; - int threshold_test; - int use_input_precision; - int scale16; - int expand16; - int do_background; - png_color_16 background_color; - - /* Local variables */ - double maxerrout; - double maxerrpc; - double maxerrabs; -} gamma_display; - -#define ALPHA_MODE_OFFSET 4 - -static void -gamma_display_init(gamma_display *dp, png_modifier *pm, png_uint_32 id, - double file_gamma, double screen_gamma, png_byte sbit, int threshold_test, - int use_input_precision, int scale16, int expand16, - int do_background, const png_color_16 *pointer_to_the_background_color, - double background_gamma) -{ - /* Standard fields */ - standard_display_init(&dp->this, &pm->this, id, do_read_interlace, - pm->use_update_info); - - /* Parameter fields */ - dp->pm = pm; - dp->file_gamma = file_gamma; - dp->screen_gamma = screen_gamma; - dp->background_gamma = background_gamma; - dp->sbit = sbit; - dp->threshold_test = threshold_test; - dp->use_input_precision = use_input_precision; - dp->scale16 = scale16; - dp->expand16 = expand16; - dp->do_background = do_background; - if (do_background && pointer_to_the_background_color != 0) - dp->background_color = *pointer_to_the_background_color; - else - memset(&dp->background_color, 0, sizeof dp->background_color); - - /* Local variable fields */ - dp->maxerrout = dp->maxerrpc = dp->maxerrabs = 0; -} - -static void -gamma_info_imp(gamma_display *dp, png_structp pp, png_infop pi) -{ - /* Reuse the standard stuff as appropriate. */ - standard_info_part1(&dp->this, pp, pi); - - /* If requested strip 16 to 8 bits - this is handled automagically below - * because the output bit depth is read from the library. Note that there - * are interactions with sBIT but, internally, libpng makes sbit at most - * PNG_MAX_GAMMA_8 prior to 1.7 when doing the following. - */ - if (dp->scale16) -# ifdef PNG_READ_SCALE_16_TO_8_SUPPORTED - png_set_scale_16(pp); -# else - /* The following works both in 1.5.4 and earlier versions: */ -# ifdef PNG_READ_16_TO_8_SUPPORTED - png_set_strip_16(pp); -# else - png_error(pp, "scale16 (16 to 8 bit conversion) not supported"); -# endif -# endif - - if (dp->expand16) -# ifdef PNG_READ_EXPAND_16_SUPPORTED - png_set_expand_16(pp); -# else - png_error(pp, "expand16 (8 to 16 bit conversion) not supported"); -# endif - - if (dp->do_background >= ALPHA_MODE_OFFSET) - { -# ifdef PNG_READ_ALPHA_MODE_SUPPORTED - { - /* This tests the alpha mode handling, if supported. */ - int mode = dp->do_background - ALPHA_MODE_OFFSET; - - /* The gamma value is the output gamma, and is in the standard, - * non-inverted, representation. It provides a default for the PNG file - * gamma, but since the file has a gAMA chunk this does not matter. - */ - const double sg = dp->screen_gamma; -# ifndef PNG_FLOATING_POINT_SUPPORTED - png_fixed_point g = fix(sg); -# endif - -# ifdef PNG_FLOATING_POINT_SUPPORTED - png_set_alpha_mode(pp, mode, sg); -# else - png_set_alpha_mode_fixed(pp, mode, g); -# endif - - /* However, for the standard Porter-Duff algorithm the output defaults - * to be linear, so if the test requires non-linear output it must be - * corrected here. - */ - if (mode == PNG_ALPHA_STANDARD && sg != 1) - { -# ifdef PNG_FLOATING_POINT_SUPPORTED - png_set_gamma(pp, sg, dp->file_gamma); -# else - png_fixed_point f = fix(dp->file_gamma); - png_set_gamma_fixed(pp, g, f); -# endif - } - } -# else - png_error(pp, "alpha mode handling not supported"); -# endif - } - - else - { - /* Set up gamma processing. */ -# ifdef PNG_FLOATING_POINT_SUPPORTED - png_set_gamma(pp, dp->screen_gamma, dp->file_gamma); -# else - { - png_fixed_point s = fix(dp->screen_gamma); - png_fixed_point f = fix(dp->file_gamma); - png_set_gamma_fixed(pp, s, f); - } -# endif - - if (dp->do_background) - { -# ifdef PNG_READ_BACKGROUND_SUPPORTED - /* NOTE: this assumes the caller provided the correct background gamma! - */ - const double bg = dp->background_gamma; -# ifndef PNG_FLOATING_POINT_SUPPORTED - png_fixed_point g = fix(bg); -# endif - -# ifdef PNG_FLOATING_POINT_SUPPORTED - png_set_background(pp, &dp->background_color, dp->do_background, - 0/*need_expand*/, bg); -# else - png_set_background_fixed(pp, &dp->background_color, - dp->do_background, 0/*need_expand*/, g); -# endif -# else - png_error(pp, "png_set_background not supported"); -# endif - } - } - - { - int i = dp->this.use_update_info; - /* Always do one call, even if use_update_info is 0. */ - do - png_read_update_info(pp, pi); - while (--i > 0); - } - - /* Now we may get a different cbRow: */ - standard_info_part2(&dp->this, pp, pi, 1 /*images*/); -} - -static void PNGCBAPI -gamma_info(png_structp pp, png_infop pi) -{ - gamma_info_imp(voidcast(gamma_display*, png_get_progressive_ptr(pp)), pp, - pi); -} - -/* Validate a single component value - the routine gets the input and output - * sample values as unscaled PNG component values along with a cache of all the - * information required to validate the values. - */ -typedef struct validate_info -{ - png_const_structp pp; - gamma_display *dp; - png_byte sbit; - int use_input_precision; - int do_background; - int scale16; - unsigned int sbit_max; - unsigned int isbit_shift; - unsigned int outmax; - - double gamma_correction; /* Overall correction required. */ - double file_inverse; /* Inverse of file gamma. */ - double screen_gamma; - double screen_inverse; /* Inverse of screen gamma. */ - - double background_red; /* Linear background value, red or gray. */ - double background_green; - double background_blue; - - double maxabs; - double maxpc; - double maxcalc; - double maxout; - double maxout_total; /* Total including quantization error */ - double outlog; - int outquant; -} -validate_info; - -static void -init_validate_info(validate_info *vi, gamma_display *dp, png_const_structp pp, - int in_depth, int out_depth) -{ - unsigned int outmax = (1U<pp = pp; - vi->dp = dp; - - if (dp->sbit > 0 && dp->sbit < in_depth) - { - vi->sbit = dp->sbit; - vi->isbit_shift = in_depth - dp->sbit; - } - - else - { - vi->sbit = (png_byte)in_depth; - vi->isbit_shift = 0; - } - - vi->sbit_max = (1U << vi->sbit)-1; - - /* This mimics the libpng threshold test, '0' is used to prevent gamma - * correction in the validation test. - */ - vi->screen_gamma = dp->screen_gamma; - if (fabs(vi->screen_gamma-1) < PNG_GAMMA_THRESHOLD) - vi->screen_gamma = vi->screen_inverse = 0; - else - vi->screen_inverse = 1/vi->screen_gamma; - - vi->use_input_precision = dp->use_input_precision; - vi->outmax = outmax; - vi->maxabs = abserr(dp->pm, in_depth, out_depth); - vi->maxpc = pcerr(dp->pm, in_depth, out_depth); - vi->maxcalc = calcerr(dp->pm, in_depth, out_depth); - vi->maxout = outerr(dp->pm, in_depth, out_depth); - vi->outquant = output_quantization_factor(dp->pm, in_depth, out_depth); - vi->maxout_total = vi->maxout + vi->outquant * .5; - vi->outlog = outlog(dp->pm, in_depth, out_depth); - - if ((dp->this.colour_type & PNG_COLOR_MASK_ALPHA) != 0 || - (dp->this.colour_type == 3 && dp->this.is_transparent) || - ((dp->this.colour_type == 0 || dp->this.colour_type == 2) && - dp->this.has_tRNS)) - { - vi->do_background = dp->do_background; - - if (vi->do_background != 0) - { - const double bg_inverse = 1/dp->background_gamma; - double r, g, b; - - /* Caller must at least put the gray value into the red channel */ - r = dp->background_color.red; r /= outmax; - g = dp->background_color.green; g /= outmax; - b = dp->background_color.blue; b /= outmax; - -# if 0 - /* libpng doesn't do this optimization, if we do pngvalid will fail. - */ - if (fabs(bg_inverse-1) >= PNG_GAMMA_THRESHOLD) -# endif - { - r = pow(r, bg_inverse); - g = pow(g, bg_inverse); - b = pow(b, bg_inverse); - } - - vi->background_red = r; - vi->background_green = g; - vi->background_blue = b; - } - } - else /* Do not expect any background processing */ - vi->do_background = 0; - - if (vi->do_background == 0) - vi->background_red = vi->background_green = vi->background_blue = 0; - - vi->gamma_correction = 1/(dp->file_gamma*dp->screen_gamma); - if (fabs(vi->gamma_correction-1) < PNG_GAMMA_THRESHOLD) - vi->gamma_correction = 0; - - vi->file_inverse = 1/dp->file_gamma; - if (fabs(vi->file_inverse-1) < PNG_GAMMA_THRESHOLD) - vi->file_inverse = 0; - - vi->scale16 = dp->scale16; -} - -/* This function handles composition of a single non-alpha component. The - * argument is the input sample value, in the range 0..1, and the alpha value. - * The result is the composed, linear, input sample. If alpha is less than zero - * this is the alpha component and the function should not be called! - */ -static double -gamma_component_compose(int do_background, double input_sample, double alpha, - double background, int *compose) -{ - switch (do_background) - { -#ifdef PNG_READ_BACKGROUND_SUPPORTED - case PNG_BACKGROUND_GAMMA_SCREEN: - case PNG_BACKGROUND_GAMMA_FILE: - case PNG_BACKGROUND_GAMMA_UNIQUE: - /* Standard PNG background processing. */ - if (alpha < 1) - { - if (alpha > 0) - { - input_sample = input_sample * alpha + background * (1-alpha); - if (compose != NULL) - *compose = 1; - } - - else - input_sample = background; - } - break; -#endif - -#ifdef PNG_READ_ALPHA_MODE_SUPPORTED - case ALPHA_MODE_OFFSET + PNG_ALPHA_STANDARD: - case ALPHA_MODE_OFFSET + PNG_ALPHA_BROKEN: - /* The components are premultiplied in either case and the output is - * gamma encoded (to get standard Porter-Duff we expect the output - * gamma to be set to 1.0!) - */ - case ALPHA_MODE_OFFSET + PNG_ALPHA_OPTIMIZED: - /* The optimization is that the partial-alpha entries are linear - * while the opaque pixels are gamma encoded, but this only affects the - * output encoding. - */ - if (alpha < 1) - { - if (alpha > 0) - { - input_sample *= alpha; - if (compose != NULL) - *compose = 1; - } - - else - input_sample = 0; - } - break; -#endif - - default: - /* Standard cases where no compositing is done (so the component - * value is already correct.) - */ - UNUSED(alpha) - UNUSED(background) - UNUSED(compose) - break; - } - - return input_sample; -} - -/* This API returns the encoded *input* component, in the range 0..1 */ -static double -gamma_component_validate(const char *name, const validate_info *vi, - unsigned int id, unsigned int od, - const double alpha /* <0 for the alpha channel itself */, - const double background /* component background value */) -{ - unsigned int isbit = id >> vi->isbit_shift; - unsigned int sbit_max = vi->sbit_max; - unsigned int outmax = vi->outmax; - int do_background = vi->do_background; - - double i; - - /* First check on the 'perfect' result obtained from the digitized input - * value, id, and compare this against the actual digitized result, 'od'. - * 'i' is the input result in the range 0..1: - */ - i = isbit; i /= sbit_max; - - /* Check for the fast route: if we don't do any background composition or if - * this is the alpha channel ('alpha' < 0) or if the pixel is opaque then - * just use the gamma_correction field to correct to the final output gamma. - */ - if (alpha == 1 /* opaque pixel component */ || !do_background -#ifdef PNG_READ_ALPHA_MODE_SUPPORTED - || do_background == ALPHA_MODE_OFFSET + PNG_ALPHA_PNG -#endif - || (alpha < 0 /* alpha channel */ -#ifdef PNG_READ_ALPHA_MODE_SUPPORTED - && do_background != ALPHA_MODE_OFFSET + PNG_ALPHA_BROKEN -#endif - )) - { - /* Then get the gamma corrected version of 'i' and compare to 'od', any - * error less than .5 is insignificant - just quantization of the output - * value to the nearest digital value (nevertheless the error is still - * recorded - it's interesting ;-) - */ - double encoded_sample = i; - double encoded_error; - - /* alpha less than 0 indicates the alpha channel, which is always linear - */ - if (alpha >= 0 && vi->gamma_correction > 0) - encoded_sample = pow(encoded_sample, vi->gamma_correction); - encoded_sample *= outmax; - - encoded_error = fabs(od-encoded_sample); - - if (encoded_error > vi->dp->maxerrout) - vi->dp->maxerrout = encoded_error; - - if (encoded_error < vi->maxout_total && encoded_error < vi->outlog) - return i; - } - - /* The slow route - attempt to do linear calculations. */ - /* There may be an error, or background processing is required, so calculate - * the actual sample values - unencoded light intensity values. Note that in - * practice these are not completely unencoded because they include a - * 'viewing correction' to decrease or (normally) increase the perceptual - * contrast of the image. There's nothing we can do about this - we don't - * know what it is - so assume the unencoded value is perceptually linear. - */ - { - double input_sample = i; /* In range 0..1 */ - double output, error, encoded_sample, encoded_error; - double es_lo, es_hi; - int compose = 0; /* Set to one if composition done */ - int output_is_encoded; /* Set if encoded to screen gamma */ - int log_max_error = 1; /* Check maximum error values */ - png_const_charp pass = 0; /* Reason test passes (or 0 for fail) */ - - /* Convert to linear light (with the above caveat.) The alpha channel is - * already linear. - */ - if (alpha >= 0) - { - int tcompose; - - if (vi->file_inverse > 0) - input_sample = pow(input_sample, vi->file_inverse); - - /* Handle the compose processing: */ - tcompose = 0; - input_sample = gamma_component_compose(do_background, input_sample, - alpha, background, &tcompose); - - if (tcompose) - compose = 1; - } - - /* And similarly for the output value, but we need to check the background - * handling to linearize it correctly. - */ - output = od; - output /= outmax; - - output_is_encoded = vi->screen_gamma > 0; - - if (alpha < 0) /* The alpha channel */ - { -#ifdef PNG_READ_ALPHA_MODE_SUPPORTED - if (do_background != ALPHA_MODE_OFFSET + PNG_ALPHA_BROKEN) -#endif - { - /* In all other cases the output alpha channel is linear already, - * don't log errors here, they are much larger in linear data. - */ - output_is_encoded = 0; - log_max_error = 0; - } - } - -#ifdef PNG_READ_ALPHA_MODE_SUPPORTED - else /* A component */ - { - if (do_background == ALPHA_MODE_OFFSET + PNG_ALPHA_OPTIMIZED && - alpha < 1) /* the optimized case - linear output */ - { - if (alpha > 0) log_max_error = 0; - output_is_encoded = 0; - } - } -#endif - - if (output_is_encoded) - output = pow(output, vi->screen_gamma); - - /* Calculate (or recalculate) the encoded_sample value and repeat the - * check above (unnecessary if we took the fast route, but harmless.) - */ - encoded_sample = input_sample; - if (output_is_encoded) - encoded_sample = pow(encoded_sample, vi->screen_inverse); - encoded_sample *= outmax; - - encoded_error = fabs(od-encoded_sample); - - /* Don't log errors in the alpha channel, or the 'optimized' case, - * neither are significant to the overall perception. - */ - if (log_max_error && encoded_error > vi->dp->maxerrout) - vi->dp->maxerrout = encoded_error; - - if (encoded_error < vi->maxout_total) - { - if (encoded_error < vi->outlog) - return i; - - /* Test passed but error is bigger than the log limit, record why the - * test passed: - */ - pass = "less than maxout:\n"; - } - - /* i: the original input value in the range 0..1 - * - * pngvalid calculations: - * input_sample: linear result; i linearized and composed, range 0..1 - * encoded_sample: encoded result; input_sample scaled to output bit depth - * - * libpng calculations: - * output: linear result; od scaled to 0..1 and linearized - * od: encoded result from libpng - */ - - /* Now we have the numbers for real errors, both absolute values as as a - * percentage of the correct value (output): - */ - error = fabs(input_sample-output); - - if (log_max_error && error > vi->dp->maxerrabs) - vi->dp->maxerrabs = error; - - /* The following is an attempt to ignore the tendency of quantization to - * dominate the percentage errors for lower result values: - */ - if (log_max_error && input_sample > .5) - { - double percentage_error = error/input_sample; - if (percentage_error > vi->dp->maxerrpc) - vi->dp->maxerrpc = percentage_error; - } - - /* Now calculate the digitization limits for 'encoded_sample' using the - * 'max' values. Note that maxout is in the encoded space but maxpc and - * maxabs are in linear light space. - * - * First find the maximum error in linear light space, range 0..1: - */ - { - double tmp = input_sample * vi->maxpc; - if (tmp < vi->maxabs) tmp = vi->maxabs; - /* If 'compose' is true the composition was done in linear space using - * integer arithmetic. This introduces an extra error of +/- 0.5 (at - * least) in the integer space used. 'maxcalc' records this, taking - * into account the possibility that even for 16 bit output 8 bit space - * may have been used. - */ - if (compose && tmp < vi->maxcalc) tmp = vi->maxcalc; - - /* The 'maxout' value refers to the encoded result, to compare with - * this encode input_sample adjusted by the maximum error (tmp) above. - */ - es_lo = encoded_sample - vi->maxout; - - if (es_lo > 0 && input_sample-tmp > 0) - { - double low_value = input_sample-tmp; - if (output_is_encoded) - low_value = pow(low_value, vi->screen_inverse); - low_value *= outmax; - if (low_value < es_lo) es_lo = low_value; - - /* Quantize this appropriately: */ - es_lo = ceil(es_lo / vi->outquant - .5) * vi->outquant; - } - - else - es_lo = 0; - - es_hi = encoded_sample + vi->maxout; - - if (es_hi < outmax && input_sample+tmp < 1) - { - double high_value = input_sample+tmp; - if (output_is_encoded) - high_value = pow(high_value, vi->screen_inverse); - high_value *= outmax; - if (high_value > es_hi) es_hi = high_value; - - es_hi = floor(es_hi / vi->outquant + .5) * vi->outquant; - } - - else - es_hi = outmax; - } - - /* The primary test is that the final encoded value returned by the - * library should be between the two limits (inclusive) that were - * calculated above. - */ - if (od >= es_lo && od <= es_hi) - { - /* The value passes, but we may need to log the information anyway. */ - if (encoded_error < vi->outlog) - return i; - - if (pass == 0) - pass = "within digitization limits:\n"; - } - - { - /* There has been an error in processing, or we need to log this - * value. - */ - double is_lo, is_hi; - - /* pass is set at this point if either of the tests above would have - * passed. Don't do these additional tests here - just log the - * original [es_lo..es_hi] values. - */ - if (pass == 0 && vi->use_input_precision && vi->dp->sbit) - { - /* Ok, something is wrong - this actually happens in current libpng - * 16-to-8 processing. Assume that the input value (id, adjusted - * for sbit) can be anywhere between value-.5 and value+.5 - quite a - * large range if sbit is low. - * - * NOTE: at present because the libpng gamma table stuff has been - * changed to use a rounding algorithm to correct errors in 8-bit - * calculations the precise sbit calculation (a shift) has been - * lost. This can result in up to a +/-1 error in the presence of - * an sbit less than the bit depth. - */ -# if PNG_LIBPNG_VER < 10700 -# define SBIT_ERROR .5 -# else -# define SBIT_ERROR 1. -# endif - double tmp = (isbit - SBIT_ERROR)/sbit_max; - - if (tmp <= 0) - tmp = 0; - - else if (alpha >= 0 && vi->file_inverse > 0 && tmp < 1) - tmp = pow(tmp, vi->file_inverse); - - tmp = gamma_component_compose(do_background, tmp, alpha, background, - NULL); - - if (output_is_encoded && tmp > 0 && tmp < 1) - tmp = pow(tmp, vi->screen_inverse); - - is_lo = ceil(outmax * tmp - vi->maxout_total); - - if (is_lo < 0) - is_lo = 0; - - tmp = (isbit + SBIT_ERROR)/sbit_max; - - if (tmp >= 1) - tmp = 1; - - else if (alpha >= 0 && vi->file_inverse > 0 && tmp < 1) - tmp = pow(tmp, vi->file_inverse); - - tmp = gamma_component_compose(do_background, tmp, alpha, background, - NULL); - - if (output_is_encoded && tmp > 0 && tmp < 1) - tmp = pow(tmp, vi->screen_inverse); - - is_hi = floor(outmax * tmp + vi->maxout_total); - - if (is_hi > outmax) - is_hi = outmax; - - if (!(od < is_lo || od > is_hi)) - { - if (encoded_error < vi->outlog) - return i; - - pass = "within input precision limits:\n"; - } - - /* One last chance. If this is an alpha channel and the 16to8 - * option has been used and 'inaccurate' scaling is used then the - * bit reduction is obtained by simply using the top 8 bits of the - * value. - * - * This is only done for older libpng versions when the 'inaccurate' - * (chop) method of scaling was used. - */ -# ifndef PNG_READ_16_TO_8_ACCURATE_SCALE_SUPPORTED -# if PNG_LIBPNG_VER < 10504 - /* This may be required for other components in the future, - * but at present the presence of gamma correction effectively - * prevents the errors in the component scaling (I don't quite - * understand why, but since it's better this way I care not - * to ask, JB 20110419.) - */ - if (pass == 0 && alpha < 0 && vi->scale16 && vi->sbit > 8 && - vi->sbit + vi->isbit_shift == 16) - { - tmp = ((id >> 8) - .5)/255; - - if (tmp > 0) - { - is_lo = ceil(outmax * tmp - vi->maxout_total); - if (is_lo < 0) is_lo = 0; - } - - else - is_lo = 0; - - tmp = ((id >> 8) + .5)/255; - - if (tmp < 1) - { - is_hi = floor(outmax * tmp + vi->maxout_total); - if (is_hi > outmax) is_hi = outmax; - } - - else - is_hi = outmax; - - if (!(od < is_lo || od > is_hi)) - { - if (encoded_error < vi->outlog) - return i; - - pass = "within 8 bit limits:\n"; - } - } -# endif -# endif - } - else /* !use_input_precision */ - is_lo = es_lo, is_hi = es_hi; - - /* Attempt to output a meaningful error/warning message: the message - * output depends on the background/composite operation being performed - * because this changes what parameters were actually used above. - */ - { - size_t pos = 0; - /* Need either 1/255 or 1/65535 precision here; 3 or 6 decimal - * places. Just use outmax to work out which. - */ - int precision = (outmax >= 1000 ? 6 : 3); - int use_input=1, use_background=0, do_compose=0; - char msg[256]; - - if (pass != 0) - pos = safecat(msg, sizeof msg, pos, "\n\t"); - - /* Set up the various flags, the output_is_encoded flag above - * is also used below. do_compose is just a double check. - */ - switch (do_background) - { -# ifdef PNG_READ_BACKGROUND_SUPPORTED - case PNG_BACKGROUND_GAMMA_SCREEN: - case PNG_BACKGROUND_GAMMA_FILE: - case PNG_BACKGROUND_GAMMA_UNIQUE: - use_background = (alpha >= 0 && alpha < 1); -# endif -# ifdef PNG_READ_ALPHA_MODE_SUPPORTED - /* FALLTHROUGH */ - case ALPHA_MODE_OFFSET + PNG_ALPHA_STANDARD: - case ALPHA_MODE_OFFSET + PNG_ALPHA_BROKEN: - case ALPHA_MODE_OFFSET + PNG_ALPHA_OPTIMIZED: -# endif /* ALPHA_MODE_SUPPORTED */ - do_compose = (alpha > 0 && alpha < 1); - use_input = (alpha != 0); - break; - - default: - break; - } - - /* Check the 'compose' flag */ - if (compose != do_compose) - png_error(vi->pp, "internal error (compose)"); - - /* 'name' is the component name */ - pos = safecat(msg, sizeof msg, pos, name); - pos = safecat(msg, sizeof msg, pos, "("); - pos = safecatn(msg, sizeof msg, pos, id); - if (use_input || pass != 0/*logging*/) - { - if (isbit != id) - { - /* sBIT has reduced the precision of the input: */ - pos = safecat(msg, sizeof msg, pos, ", sbit("); - pos = safecatn(msg, sizeof msg, pos, vi->sbit); - pos = safecat(msg, sizeof msg, pos, "): "); - pos = safecatn(msg, sizeof msg, pos, isbit); - } - pos = safecat(msg, sizeof msg, pos, "/"); - /* The output is either "id/max" or "id sbit(sbit): isbit/max" */ - pos = safecatn(msg, sizeof msg, pos, vi->sbit_max); - } - pos = safecat(msg, sizeof msg, pos, ")"); - - /* A component may have been multiplied (in linear space) by the - * alpha value, 'compose' says whether this is relevant. - */ - if (compose || pass != 0) - { - /* If any form of composition is being done report our - * calculated linear value here (the code above doesn't record - * the input value before composition is performed, so what - * gets reported is the value after composition.) - */ - if (use_input || pass != 0) - { - if (vi->file_inverse > 0) - { - pos = safecat(msg, sizeof msg, pos, "^"); - pos = safecatd(msg, sizeof msg, pos, vi->file_inverse, 2); - } - - else - pos = safecat(msg, sizeof msg, pos, "[linear]"); - - pos = safecat(msg, sizeof msg, pos, "*(alpha)"); - pos = safecatd(msg, sizeof msg, pos, alpha, precision); - } - - /* Now record the *linear* background value if it was used - * (this function is not passed the original, non-linear, - * value but it is contained in the test name.) - */ - if (use_background) - { - pos = safecat(msg, sizeof msg, pos, use_input ? "+" : " "); - pos = safecat(msg, sizeof msg, pos, "(background)"); - pos = safecatd(msg, sizeof msg, pos, background, precision); - pos = safecat(msg, sizeof msg, pos, "*"); - pos = safecatd(msg, sizeof msg, pos, 1-alpha, precision); - } - } - - /* Report the calculated value (input_sample) and the linearized - * libpng value (output) unless this is just a component gamma - * correction. - */ - if (compose || alpha < 0 || pass != 0) - { - pos = safecat(msg, sizeof msg, pos, - pass != 0 ? " =\n\t" : " = "); - pos = safecatd(msg, sizeof msg, pos, input_sample, precision); - pos = safecat(msg, sizeof msg, pos, " (libpng: "); - pos = safecatd(msg, sizeof msg, pos, output, precision); - pos = safecat(msg, sizeof msg, pos, ")"); - - /* Finally report the output gamma encoding, if any. */ - if (output_is_encoded) - { - pos = safecat(msg, sizeof msg, pos, " ^"); - pos = safecatd(msg, sizeof msg, pos, vi->screen_inverse, 2); - pos = safecat(msg, sizeof msg, pos, "(to screen) ="); - } - - else - pos = safecat(msg, sizeof msg, pos, " [screen is linear] ="); - } - - if ((!compose && alpha >= 0) || pass != 0) - { - if (pass != 0) /* logging */ - pos = safecat(msg, sizeof msg, pos, "\n\t[overall:"); - - /* This is the non-composition case, the internal linear - * values are irrelevant (though the log below will reveal - * them.) Output a much shorter warning/error message and report - * the overall gamma correction. - */ - if (vi->gamma_correction > 0) - { - pos = safecat(msg, sizeof msg, pos, " ^"); - pos = safecatd(msg, sizeof msg, pos, vi->gamma_correction, 2); - pos = safecat(msg, sizeof msg, pos, "(gamma correction) ="); - } - - else - pos = safecat(msg, sizeof msg, pos, - " [no gamma correction] ="); - - if (pass != 0) - pos = safecat(msg, sizeof msg, pos, "]"); - } - - /* This is our calculated encoded_sample which should (but does - * not) match od: - */ - pos = safecat(msg, sizeof msg, pos, pass != 0 ? "\n\t" : " "); - pos = safecatd(msg, sizeof msg, pos, is_lo, 1); - pos = safecat(msg, sizeof msg, pos, " < "); - pos = safecatd(msg, sizeof msg, pos, encoded_sample, 1); - pos = safecat(msg, sizeof msg, pos, " (libpng: "); - pos = safecatn(msg, sizeof msg, pos, od); - pos = safecat(msg, sizeof msg, pos, ")"); - pos = safecat(msg, sizeof msg, pos, "/"); - pos = safecatn(msg, sizeof msg, pos, outmax); - pos = safecat(msg, sizeof msg, pos, " < "); - pos = safecatd(msg, sizeof msg, pos, is_hi, 1); - - if (pass == 0) /* The error condition */ - { -# ifdef PNG_WARNINGS_SUPPORTED - png_warning(vi->pp, msg); -# else - store_warning(vi->pp, msg); -# endif - } - - else /* logging this value */ - store_verbose(&vi->dp->pm->this, vi->pp, pass, msg); - } - } - } - - return i; -} - -static void -gamma_image_validate(gamma_display *dp, png_const_structp pp, - png_infop pi) -{ - /* Get some constants derived from the input and output file formats: */ - const png_store* const ps = dp->this.ps; - png_byte in_ct = dp->this.colour_type; - png_byte in_bd = dp->this.bit_depth; - png_uint_32 w = dp->this.w; - png_uint_32 h = dp->this.h; - const size_t cbRow = dp->this.cbRow; - png_byte out_ct = png_get_color_type(pp, pi); - png_byte out_bd = png_get_bit_depth(pp, pi); - - /* There are three sources of error, firstly the quantization in the - * file encoding, determined by sbit and/or the file depth, secondly - * the output (screen) gamma and thirdly the output file encoding. - * - * Since this API receives the screen and file gamma in double - * precision it is possible to calculate an exact answer given an input - * pixel value. Therefore we assume that the *input* value is exact - - * sample/maxsample - calculate the corresponding gamma corrected - * output to the limits of double precision arithmetic and compare with - * what libpng returns. - * - * Since the library must quantize the output to 8 or 16 bits there is - * a fundamental limit on the accuracy of the output of +/-.5 - this - * quantization limit is included in addition to the other limits - * specified by the parameters to the API. (Effectively, add .5 - * everywhere.) - * - * The behavior of the 'sbit' parameter is defined by section 12.5 - * (sample depth scaling) of the PNG spec. That section forces the - * decoder to assume that the PNG values have been scaled if sBIT is - * present: - * - * png-sample = floor( input-sample * (max-out/max-in) + .5); - * - * This means that only a subset of the possible PNG values should - * appear in the input. However, the spec allows the encoder to use a - * variety of approximations to the above and doesn't require any - * restriction of the values produced. - * - * Nevertheless the spec requires that the upper 'sBIT' bits of the - * value stored in a PNG file be the original sample bits. - * Consequently the code below simply scales the top sbit bits by - * (1<this.palette; - int in_is_transparent = dp->this.is_transparent; - int process_tRNS; - int out_npalette = -1; - int out_is_transparent = 0; /* Just refers to the palette case */ - store_palette out_palette; - validate_info vi; - - /* Check for row overwrite errors */ - store_image_check(dp->this.ps, pp, 0); - - /* Supply the input and output sample depths here - 8 for an indexed image, - * otherwise the bit depth. - */ - init_validate_info(&vi, dp, pp, in_ct==3?8:in_bd, out_ct==3?8:out_bd); - - processing = (vi.gamma_correction > 0 && !dp->threshold_test) - || in_bd != out_bd || in_ct != out_ct || vi.do_background; - process_tRNS = dp->this.has_tRNS && vi.do_background; - - /* TODO: FIX THIS: MAJOR BUG! If the transformations all happen inside - * the palette there is no way of finding out, because libpng fails to - * update the palette on png_read_update_info. Indeed, libpng doesn't - * even do the required work until much later, when it doesn't have any - * info pointer. Oops. For the moment 'processing' is turned off if - * out_ct is palette. - */ - if (in_ct == 3 && out_ct == 3) - processing = 0; - - if (processing && out_ct == 3) - out_is_transparent = read_palette(out_palette, &out_npalette, pp, pi); - - for (y=0; ythis.palette[in_index].alpha : - sample(std, in_ct, in_bd, x, samples_per_pixel, 0, 0); - - unsigned int output_alpha = 65536 /* as a flag value */; - - if (out_ct == 3) - { - if (out_is_transparent) - output_alpha = out_palette[out_index].alpha; - } - - else if ((out_ct & PNG_COLOR_MASK_ALPHA) != 0) - output_alpha = sample(pRow, out_ct, out_bd, x, - samples_per_pixel, 0, 0); - - if (output_alpha != 65536) - alpha = gamma_component_validate("alpha", &vi, input_alpha, - output_alpha, -1/*alpha*/, 0/*background*/); - - else /* no alpha in output */ - { - /* This is a copy of the calculation of 'i' above in order to - * have the alpha value to use in the background calculation. - */ - alpha = input_alpha >> vi.isbit_shift; - alpha /= vi.sbit_max; - } - } - - else if (process_tRNS) - { - /* alpha needs to be set appropriately for this pixel, it is - * currently 1 and needs to be 0 for an input pixel which matches - * the values in tRNS. - */ - switch (in_ct) - { - case 0: /* gray */ - if (sample(std, in_ct, in_bd, x, 0, 0, 0) == - dp->this.transparent.red) - alpha = 0; - break; - - case 2: /* RGB */ - if (sample(std, in_ct, in_bd, x, 0, 0, 0) == - dp->this.transparent.red && - sample(std, in_ct, in_bd, x, 1, 0, 0) == - dp->this.transparent.green && - sample(std, in_ct, in_bd, x, 2, 0, 0) == - dp->this.transparent.blue) - alpha = 0; - break; - - default: - break; - } - } - - /* Handle grayscale or RGB components. */ - if ((in_ct & PNG_COLOR_MASK_COLOR) == 0) /* grayscale */ - (void)gamma_component_validate("gray", &vi, - sample(std, in_ct, in_bd, x, 0, 0, 0), - sample(pRow, out_ct, out_bd, x, 0, 0, 0), - alpha/*component*/, vi.background_red); - else /* RGB or palette */ - { - (void)gamma_component_validate("red", &vi, - in_ct == 3 ? in_palette[in_index].red : - sample(std, in_ct, in_bd, x, 0, 0, 0), - out_ct == 3 ? out_palette[out_index].red : - sample(pRow, out_ct, out_bd, x, 0, 0, 0), - alpha/*component*/, vi.background_red); - - (void)gamma_component_validate("green", &vi, - in_ct == 3 ? in_palette[in_index].green : - sample(std, in_ct, in_bd, x, 1, 0, 0), - out_ct == 3 ? out_palette[out_index].green : - sample(pRow, out_ct, out_bd, x, 1, 0, 0), - alpha/*component*/, vi.background_green); - - (void)gamma_component_validate("blue", &vi, - in_ct == 3 ? in_palette[in_index].blue : - sample(std, in_ct, in_bd, x, 2, 0, 0), - out_ct == 3 ? out_palette[out_index].blue : - sample(pRow, out_ct, out_bd, x, 2, 0, 0), - alpha/*component*/, vi.background_blue); - } - } - } - - else if (memcmp(std, pRow, cbRow) != 0) - { - char msg[64]; - - /* No transform is expected on the threshold tests. */ - sprintf(msg, "gamma: below threshold row %lu changed", - (unsigned long)y); - - png_error(pp, msg); - } - } /* row (y) loop */ - - dp->this.ps->validated = 1; -} - -static void PNGCBAPI -gamma_end(png_structp ppIn, png_infop pi) -{ - png_const_structp pp = ppIn; - gamma_display *dp = voidcast(gamma_display*, png_get_progressive_ptr(pp)); - - if (!dp->this.speed) - gamma_image_validate(dp, pp, pi); - else - dp->this.ps->validated = 1; -} - -/* A single test run checking a gamma transformation. - * - * maxabs: maximum absolute error as a fraction - * maxout: maximum output error in the output units - * maxpc: maximum percentage error (as a percentage) - */ -static void -gamma_test(png_modifier *pmIn, png_byte colour_typeIn, - png_byte bit_depthIn, int palette_numberIn, - int interlace_typeIn, - const double file_gammaIn, const double screen_gammaIn, - png_byte sbitIn, int threshold_testIn, - const char *name, - int use_input_precisionIn, int scale16In, - int expand16In, int do_backgroundIn, - const png_color_16 *bkgd_colorIn, double bkgd_gammaIn) -{ - gamma_display d; - context(&pmIn->this, fault); - - gamma_display_init(&d, pmIn, FILEID(colour_typeIn, bit_depthIn, - palette_numberIn, interlace_typeIn, 0, 0, 0), - file_gammaIn, screen_gammaIn, sbitIn, - threshold_testIn, use_input_precisionIn, scale16In, - expand16In, do_backgroundIn, bkgd_colorIn, bkgd_gammaIn); - - Try - { - png_structp pp; - png_infop pi; - gama_modification gama_mod; - srgb_modification srgb_mod; - sbit_modification sbit_mod; - - /* For the moment don't use the png_modifier support here. */ - d.pm->encoding_counter = 0; - modifier_set_encoding(d.pm); /* Just resets everything */ - d.pm->current_gamma = d.file_gamma; - - /* Make an appropriate modifier to set the PNG file gamma to the - * given gamma value and the sBIT chunk to the given precision. - */ - d.pm->modifications = NULL; - gama_modification_init(&gama_mod, d.pm, d.file_gamma); - srgb_modification_init(&srgb_mod, d.pm, 127 /*delete*/); - if (d.sbit > 0) - sbit_modification_init(&sbit_mod, d.pm, d.sbit); - - modification_reset(d.pm->modifications); - - /* Get a png_struct for reading the image. */ - pp = set_modifier_for_read(d.pm, &pi, d.this.id, name); - standard_palette_init(&d.this); - - /* Introduce the correct read function. */ - if (d.pm->this.progressive) - { - /* Share the row function with the standard implementation. */ - png_set_progressive_read_fn(pp, &d, gamma_info, progressive_row, - gamma_end); - - /* Now feed data into the reader until we reach the end: */ - modifier_progressive_read(d.pm, pp, pi); - } - else - { - /* modifier_read expects a png_modifier* */ - png_set_read_fn(pp, d.pm, modifier_read); - - /* Check the header values: */ - png_read_info(pp, pi); - - /* Process the 'info' requirements. Only one image is generated */ - gamma_info_imp(&d, pp, pi); - - sequential_row(&d.this, pp, pi, -1, 0); - - if (!d.this.speed) - gamma_image_validate(&d, pp, pi); - else - d.this.ps->validated = 1; - } - - modifier_reset(d.pm); - - if (d.pm->log && !d.threshold_test && !d.this.speed) - fprintf(stderr, "%d bit %s %s: max error %f (%.2g, %2g%%)\n", - d.this.bit_depth, colour_types[d.this.colour_type], name, - d.maxerrout, d.maxerrabs, 100*d.maxerrpc); - - /* Log the summary values too. */ - if (d.this.colour_type == 0 || d.this.colour_type == 4) - { - switch (d.this.bit_depth) - { - case 1: - break; - - case 2: - if (d.maxerrout > d.pm->error_gray_2) - d.pm->error_gray_2 = d.maxerrout; - - break; - - case 4: - if (d.maxerrout > d.pm->error_gray_4) - d.pm->error_gray_4 = d.maxerrout; - - break; - - case 8: - if (d.maxerrout > d.pm->error_gray_8) - d.pm->error_gray_8 = d.maxerrout; - - break; - - case 16: - if (d.maxerrout > d.pm->error_gray_16) - d.pm->error_gray_16 = d.maxerrout; - - break; - - default: - png_error(pp, "bad bit depth (internal: 1)"); - } - } - - else if (d.this.colour_type == 2 || d.this.colour_type == 6) - { - switch (d.this.bit_depth) - { - case 8: - - if (d.maxerrout > d.pm->error_color_8) - d.pm->error_color_8 = d.maxerrout; - - break; - - case 16: - - if (d.maxerrout > d.pm->error_color_16) - d.pm->error_color_16 = d.maxerrout; - - break; - - default: - png_error(pp, "bad bit depth (internal: 2)"); - } - } - - else if (d.this.colour_type == 3) - { - if (d.maxerrout > d.pm->error_indexed) - d.pm->error_indexed = d.maxerrout; - } - } - - Catch(fault) - modifier_reset(voidcast(png_modifier*,(void*)fault)); -} - -static void gamma_threshold_test(png_modifier *pm, png_byte colour_type, - png_byte bit_depth, int interlace_type, double file_gamma, - double screen_gamma) -{ - size_t pos = 0; - char name[64]; - pos = safecat(name, sizeof name, pos, "threshold "); - pos = safecatd(name, sizeof name, pos, file_gamma, 3); - pos = safecat(name, sizeof name, pos, "/"); - pos = safecatd(name, sizeof name, pos, screen_gamma, 3); - - (void)gamma_test(pm, colour_type, bit_depth, 0/*palette*/, interlace_type, - file_gamma, screen_gamma, 0/*sBIT*/, 1/*threshold test*/, name, - 0 /*no input precision*/, - 0 /*no scale16*/, 0 /*no expand16*/, 0 /*no background*/, 0 /*hence*/, - 0 /*no background gamma*/); -} - -static void -perform_gamma_threshold_tests(png_modifier *pm) -{ - png_byte colour_type = 0; - png_byte bit_depth = 0; - unsigned int palette_number = 0; - - /* Don't test more than one instance of each palette - it's pointless, in - * fact this test is somewhat excessive since libpng doesn't make this - * decision based on colour type or bit depth! - * - * CHANGED: now test two palettes and, as a side effect, images with and - * without tRNS. - */ - while (next_format(&colour_type, &bit_depth, &palette_number, - pm->test_lbg_gamma_threshold, pm->test_tRNS)) - if (palette_number < 2) - { - double test_gamma = 1.0; - while (test_gamma >= .4) - { - /* There's little point testing the interlacing vs non-interlacing, - * but this can be set from the command line. - */ - gamma_threshold_test(pm, colour_type, bit_depth, pm->interlace_type, - test_gamma, 1/test_gamma); - test_gamma *= .95; - } - - /* And a special test for sRGB */ - gamma_threshold_test(pm, colour_type, bit_depth, pm->interlace_type, - .45455, 2.2); - - if (fail(pm)) - return; - } -} - -static void gamma_transform_test(png_modifier *pm, - png_byte colour_type, png_byte bit_depth, - int palette_number, - int interlace_type, const double file_gamma, - const double screen_gamma, png_byte sbit, - int use_input_precision, int scale16) -{ - size_t pos = 0; - char name[64]; - - if (sbit != bit_depth && sbit != 0) - { - pos = safecat(name, sizeof name, pos, "sbit("); - pos = safecatn(name, sizeof name, pos, sbit); - pos = safecat(name, sizeof name, pos, ") "); - } - - else - pos = safecat(name, sizeof name, pos, "gamma "); - - if (scale16) - pos = safecat(name, sizeof name, pos, "16to8 "); - - pos = safecatd(name, sizeof name, pos, file_gamma, 3); - pos = safecat(name, sizeof name, pos, "->"); - pos = safecatd(name, sizeof name, pos, screen_gamma, 3); - - gamma_test(pm, colour_type, bit_depth, palette_number, interlace_type, - file_gamma, screen_gamma, sbit, 0, name, use_input_precision, - scale16, pm->test_gamma_expand16, 0 , 0, 0); -} - -static void perform_gamma_transform_tests(png_modifier *pm) -{ - png_byte colour_type = 0; - png_byte bit_depth = 0; - unsigned int palette_number = 0; - - while (next_format(&colour_type, &bit_depth, &palette_number, - pm->test_lbg_gamma_transform, pm->test_tRNS)) - { - unsigned int i, j; - - for (i=0; ingamma_tests; ++i) for (j=0; jngamma_tests; ++j) - if (i != j) - { - gamma_transform_test(pm, colour_type, bit_depth, palette_number, - pm->interlace_type, 1/pm->gammas[i], pm->gammas[j], 0/*sBIT*/, - pm->use_input_precision, 0 /*do not scale16*/); - - if (fail(pm)) - return; - } - } -} - -static void perform_gamma_sbit_tests(png_modifier *pm) -{ - png_byte sbit; - - /* The only interesting cases are colour and grayscale, alpha is ignored here - * for overall speed. Only bit depths where sbit is less than the bit depth - * are tested. - */ - for (sbit=pm->sbitlow; sbit<(1<test_lbg_gamma_sbit, pm->test_tRNS)) - if ((colour_type & PNG_COLOR_MASK_ALPHA) == 0 && - ((colour_type == 3 && sbit < 8) || - (colour_type != 3 && sbit < bit_depth))) - { - unsigned int i; - - for (i=0; ingamma_tests; ++i) - { - unsigned int j; - - for (j=0; jngamma_tests; ++j) if (i != j) - { - gamma_transform_test(pm, colour_type, bit_depth, npalette, - pm->interlace_type, 1/pm->gammas[i], pm->gammas[j], - sbit, pm->use_input_precision_sbit, 0 /*scale16*/); - - if (fail(pm)) - return; - } - } - } - } -} - -/* Note that this requires a 16 bit source image but produces 8 bit output, so - * we only need the 16bit write support, but the 16 bit images are only - * generated if DO_16BIT is defined. - */ -#ifdef DO_16BIT -static void perform_gamma_scale16_tests(png_modifier *pm) -{ -# ifndef PNG_MAX_GAMMA_8 -# define PNG_MAX_GAMMA_8 11 -# endif -# if defined PNG_MAX_GAMMA_8 || PNG_LIBPNG_VER < 10700 -# define SBIT_16_TO_8 PNG_MAX_GAMMA_8 -# else -# define SBIT_16_TO_8 16 -# endif - /* Include the alpha cases here. Note that sbit matches the internal value - * used by the library - otherwise we will get spurious errors from the - * internal sbit style approximation. - * - * The threshold test is here because otherwise the 16 to 8 conversion will - * proceed *without* gamma correction, and the tests above will fail (but not - * by much) - this could be fixed, it only appears with the -g option. - */ - unsigned int i, j; - for (i=0; ingamma_tests; ++i) - { - for (j=0; jngamma_tests; ++j) - { - if (i != j && - fabs(pm->gammas[j]/pm->gammas[i]-1) >= PNG_GAMMA_THRESHOLD) - { - gamma_transform_test(pm, 0, 16, 0, pm->interlace_type, - 1/pm->gammas[i], pm->gammas[j], SBIT_16_TO_8, - pm->use_input_precision_16to8, 1 /*scale16*/); - - if (fail(pm)) - return; - - gamma_transform_test(pm, 2, 16, 0, pm->interlace_type, - 1/pm->gammas[i], pm->gammas[j], SBIT_16_TO_8, - pm->use_input_precision_16to8, 1 /*scale16*/); - - if (fail(pm)) - return; - - gamma_transform_test(pm, 4, 16, 0, pm->interlace_type, - 1/pm->gammas[i], pm->gammas[j], SBIT_16_TO_8, - pm->use_input_precision_16to8, 1 /*scale16*/); - - if (fail(pm)) - return; - - gamma_transform_test(pm, 6, 16, 0, pm->interlace_type, - 1/pm->gammas[i], pm->gammas[j], SBIT_16_TO_8, - pm->use_input_precision_16to8, 1 /*scale16*/); - - if (fail(pm)) - return; - } - } - } -} -#endif /* 16 to 8 bit conversion */ - -#if defined(PNG_READ_BACKGROUND_SUPPORTED) ||\ - defined(PNG_READ_ALPHA_MODE_SUPPORTED) -static void gamma_composition_test(png_modifier *pm, - png_byte colour_type, png_byte bit_depth, - int palette_number, - int interlace_type, const double file_gamma, - const double screen_gamma, - int use_input_precision, int do_background, - int expand_16) -{ - size_t pos = 0; - png_const_charp base; - double bg; - char name[128]; - png_color_16 background; - - /* Make up a name and get an appropriate background gamma value. */ - switch (do_background) - { - default: - base = ""; - bg = 4; /* should not be used */ - break; - case PNG_BACKGROUND_GAMMA_SCREEN: - base = " bckg(Screen):"; - bg = 1/screen_gamma; - break; - case PNG_BACKGROUND_GAMMA_FILE: - base = " bckg(File):"; - bg = file_gamma; - break; - case PNG_BACKGROUND_GAMMA_UNIQUE: - base = " bckg(Unique):"; - /* This tests the handling of a unique value, the math is such that the - * value tends to be <1, but is neither screen nor file (even if they - * match!) - */ - bg = (file_gamma + screen_gamma) / 3; - break; -#ifdef PNG_READ_ALPHA_MODE_SUPPORTED - case ALPHA_MODE_OFFSET + PNG_ALPHA_PNG: - base = " alpha(PNG)"; - bg = 4; /* should not be used */ - break; - case ALPHA_MODE_OFFSET + PNG_ALPHA_STANDARD: - base = " alpha(Porter-Duff)"; - bg = 4; /* should not be used */ - break; - case ALPHA_MODE_OFFSET + PNG_ALPHA_OPTIMIZED: - base = " alpha(Optimized)"; - bg = 4; /* should not be used */ - break; - case ALPHA_MODE_OFFSET + PNG_ALPHA_BROKEN: - base = " alpha(Broken)"; - bg = 4; /* should not be used */ - break; -#endif - } - - /* Use random background values - the background is always presented in the - * output space (8 or 16 bit components). - */ - if (expand_16 || bit_depth == 16) - { - png_uint_32 r = random_32(); - - background.red = (png_uint_16)r; - background.green = (png_uint_16)(r >> 16); - r = random_32(); - background.blue = (png_uint_16)r; - background.gray = (png_uint_16)(r >> 16); - - /* In earlier libpng versions, those where DIGITIZE is set, any background - * gamma correction in the expand16 case was done using 8-bit gamma - * correction tables, resulting in larger errors. To cope with those - * cases use a 16-bit background value which will handle this gamma - * correction. - */ -# if DIGITIZE - if (expand_16 && (do_background == PNG_BACKGROUND_GAMMA_UNIQUE || - do_background == PNG_BACKGROUND_GAMMA_FILE) && - fabs(bg*screen_gamma-1) > PNG_GAMMA_THRESHOLD) - { - /* The background values will be looked up in an 8-bit table to do - * the gamma correction, so only select values which are an exact - * match for the 8-bit table entries: - */ - background.red = (png_uint_16)((background.red >> 8) * 257); - background.green = (png_uint_16)((background.green >> 8) * 257); - background.blue = (png_uint_16)((background.blue >> 8) * 257); - background.gray = (png_uint_16)((background.gray >> 8) * 257); - } -# endif - } - - else /* 8 bit colors */ - { - png_uint_32 r = random_32(); - - background.red = (png_byte)r; - background.green = (png_byte)(r >> 8); - background.blue = (png_byte)(r >> 16); - background.gray = (png_byte)(r >> 24); - } - - background.index = 193; /* rgb(193,193,193) to detect errors */ - - if (!(colour_type & PNG_COLOR_MASK_COLOR)) - { - /* Because, currently, png_set_background is always called with - * 'need_expand' false in this case and because the gamma test itself - * doesn't cause an expand to 8-bit for lower bit depths the colour must - * be reduced to the correct range. - */ - if (bit_depth < 8) - background.gray &= (png_uint_16)((1U << bit_depth)-1); - - /* Grayscale input, we do not convert to RGB (TBD), so we must set the - * background to gray - else libpng seems to fail. - */ - background.red = background.green = background.blue = background.gray; - } - - pos = safecat(name, sizeof name, pos, "gamma "); - pos = safecatd(name, sizeof name, pos, file_gamma, 3); - pos = safecat(name, sizeof name, pos, "->"); - pos = safecatd(name, sizeof name, pos, screen_gamma, 3); - - pos = safecat(name, sizeof name, pos, base); - if (do_background < ALPHA_MODE_OFFSET) - { - /* Include the background color and gamma in the name: */ - pos = safecat(name, sizeof name, pos, "("); - /* This assumes no expand gray->rgb - the current code won't handle that! - */ - if (colour_type & PNG_COLOR_MASK_COLOR) - { - pos = safecatn(name, sizeof name, pos, background.red); - pos = safecat(name, sizeof name, pos, ","); - pos = safecatn(name, sizeof name, pos, background.green); - pos = safecat(name, sizeof name, pos, ","); - pos = safecatn(name, sizeof name, pos, background.blue); - } - else - pos = safecatn(name, sizeof name, pos, background.gray); - pos = safecat(name, sizeof name, pos, ")^"); - pos = safecatd(name, sizeof name, pos, bg, 3); - } - - gamma_test(pm, colour_type, bit_depth, palette_number, interlace_type, - file_gamma, screen_gamma, 0/*sBIT*/, 0, name, use_input_precision, - 0/*strip 16*/, expand_16, do_background, &background, bg); -} - - -static void -perform_gamma_composition_tests(png_modifier *pm, int do_background, - int expand_16) -{ - png_byte colour_type = 0; - png_byte bit_depth = 0; - unsigned int palette_number = 0; - - /* Skip the non-alpha cases - there is no setting of a transparency colour at - * present. - * - * TODO: incorrect; the palette case sets tRNS and, now RGB and gray do, - * however the palette case fails miserably so is commented out below. - */ - while (next_format(&colour_type, &bit_depth, &palette_number, - pm->test_lbg_gamma_composition, pm->test_tRNS)) - if ((colour_type & PNG_COLOR_MASK_ALPHA) != 0 -#if 0 /* TODO: FIXME */ - /*TODO: FIXME: this should work */ - || colour_type == 3 -#endif - || (colour_type != 3 && palette_number != 0)) - { - unsigned int i, j; - - /* Don't skip the i==j case here - it's relevant. */ - for (i=0; ingamma_tests; ++i) for (j=0; jngamma_tests; ++j) - { - gamma_composition_test(pm, colour_type, bit_depth, palette_number, - pm->interlace_type, 1/pm->gammas[i], pm->gammas[j], - pm->use_input_precision, do_background, expand_16); - - if (fail(pm)) - return; - } - } -} -#endif /* READ_BACKGROUND || READ_ALPHA_MODE */ - -static void -init_gamma_errors(png_modifier *pm) -{ - /* Use -1 to catch tests that were not actually run */ - pm->error_gray_2 = pm->error_gray_4 = pm->error_gray_8 = -1.; - pm->error_color_8 = -1.; - pm->error_indexed = -1.; - pm->error_gray_16 = pm->error_color_16 = -1.; -} - -static void -print_one(const char *leader, double err) -{ - if (err != -1.) - printf(" %s %.5f\n", leader, err); -} - -static void -summarize_gamma_errors(png_modifier *pm, png_const_charp who, int low_bit_depth, - int indexed) -{ - fflush(stderr); - - if (who) - printf("\nGamma correction with %s:\n", who); - - else - printf("\nBasic gamma correction:\n"); - - if (low_bit_depth) - { - print_one(" 2 bit gray: ", pm->error_gray_2); - print_one(" 4 bit gray: ", pm->error_gray_4); - print_one(" 8 bit gray: ", pm->error_gray_8); - print_one(" 8 bit color:", pm->error_color_8); - if (indexed) - print_one(" indexed: ", pm->error_indexed); - } - - print_one("16 bit gray: ", pm->error_gray_16); - print_one("16 bit color:", pm->error_color_16); - - fflush(stdout); -} - -static void -perform_gamma_test(png_modifier *pm, int summary) -{ - /*TODO: remove this*/ - /* Save certain values for the temporary overrides below. */ - unsigned int calculations_use_input_precision = - pm->calculations_use_input_precision; -# ifdef PNG_READ_BACKGROUND_SUPPORTED - double maxout8 = pm->maxout8; -# endif - - /* First some arbitrary no-transform tests: */ - if (!pm->this.speed && pm->test_gamma_threshold) - { - perform_gamma_threshold_tests(pm); - - if (fail(pm)) - return; - } - - /* Now some real transforms. */ - if (pm->test_gamma_transform) - { - if (summary) - { - fflush(stderr); - printf("Gamma correction error summary\n\n"); - printf("The printed value is the maximum error in the pixel values\n"); - printf("calculated by the libpng gamma correction code. The error\n"); - printf("is calculated as the difference between the output pixel\n"); - printf("value (always an integer) and the ideal value from the\n"); - printf("libpng specification (typically not an integer).\n\n"); - - printf("Expect this value to be less than .5 for 8 bit formats,\n"); - printf("less than 1 for formats with fewer than 8 bits and a small\n"); - printf("number (typically less than 5) for the 16 bit formats.\n"); - printf("For performance reasons the value for 16 bit formats\n"); - printf("increases when the image file includes an sBIT chunk.\n"); - fflush(stdout); - } - - init_gamma_errors(pm); - /*TODO: remove this. Necessary because the current libpng - * implementation works in 8 bits: - */ - if (pm->test_gamma_expand16) - pm->calculations_use_input_precision = 1; - perform_gamma_transform_tests(pm); - if (!calculations_use_input_precision) - pm->calculations_use_input_precision = 0; - - if (summary) - summarize_gamma_errors(pm, 0/*who*/, 1/*low bit depth*/, 1/*indexed*/); - - if (fail(pm)) - return; - } - - /* The sbit tests produce much larger errors: */ - if (pm->test_gamma_sbit) - { - init_gamma_errors(pm); - perform_gamma_sbit_tests(pm); - - if (summary) - summarize_gamma_errors(pm, "sBIT", pm->sbitlow < 8U, 1/*indexed*/); - - if (fail(pm)) - return; - } - -#ifdef DO_16BIT /* Should be READ_16BIT_SUPPORTED */ - if (pm->test_gamma_scale16) - { - /* The 16 to 8 bit strip operations: */ - init_gamma_errors(pm); - perform_gamma_scale16_tests(pm); - - if (summary) - { - fflush(stderr); - printf("\nGamma correction with 16 to 8 bit reduction:\n"); - printf(" 16 bit gray: %.5f\n", pm->error_gray_16); - printf(" 16 bit color: %.5f\n", pm->error_color_16); - fflush(stdout); - } - - if (fail(pm)) - return; - } -#endif - -#ifdef PNG_READ_BACKGROUND_SUPPORTED - if (pm->test_gamma_background) - { - init_gamma_errors(pm); - - /*TODO: remove this. Necessary because the current libpng - * implementation works in 8 bits: - */ - if (pm->test_gamma_expand16) - { - pm->calculations_use_input_precision = 1; - pm->maxout8 = .499; /* because the 16 bit background is smashed */ - } - perform_gamma_composition_tests(pm, PNG_BACKGROUND_GAMMA_UNIQUE, - pm->test_gamma_expand16); - if (!calculations_use_input_precision) - pm->calculations_use_input_precision = 0; - pm->maxout8 = maxout8; - - if (summary) - summarize_gamma_errors(pm, "background", 1, 0/*indexed*/); - - if (fail(pm)) - return; - } -#endif - -#ifdef PNG_READ_ALPHA_MODE_SUPPORTED - if (pm->test_gamma_alpha_mode) - { - int do_background; - - init_gamma_errors(pm); - - /*TODO: remove this. Necessary because the current libpng - * implementation works in 8 bits: - */ - if (pm->test_gamma_expand16) - pm->calculations_use_input_precision = 1; - for (do_background = ALPHA_MODE_OFFSET + PNG_ALPHA_STANDARD; - do_background <= ALPHA_MODE_OFFSET + PNG_ALPHA_BROKEN && !fail(pm); - ++do_background) - perform_gamma_composition_tests(pm, do_background, - pm->test_gamma_expand16); - if (!calculations_use_input_precision) - pm->calculations_use_input_precision = 0; - - if (summary) - summarize_gamma_errors(pm, "alpha mode", 1, 0/*indexed*/); - - if (fail(pm)) - return; - } -#endif -} -#endif /* PNG_READ_GAMMA_SUPPORTED */ -#endif /* PNG_READ_SUPPORTED */ - -/* INTERLACE MACRO VALIDATION */ -/* This is copied verbatim from the specification, it is simply the pass - * number in which each pixel in each 8x8 tile appears. The array must - * be indexed adam7[y][x] and notice that the pass numbers are based at - * 1, not 0 - the base libpng uses. - */ -static const -png_byte adam7[8][8] = -{ - { 1,6,4,6,2,6,4,6 }, - { 7,7,7,7,7,7,7,7 }, - { 5,6,5,6,5,6,5,6 }, - { 7,7,7,7,7,7,7,7 }, - { 3,6,4,6,3,6,4,6 }, - { 7,7,7,7,7,7,7,7 }, - { 5,6,5,6,5,6,5,6 }, - { 7,7,7,7,7,7,7,7 } -}; - -/* This routine validates all the interlace support macros in png.h for - * a variety of valid PNG widths and heights. It uses a number of similarly - * named internal routines that feed off the above array. - */ -static png_uint_32 -png_pass_start_row(int pass) -{ - int x, y; - ++pass; - for (y=0; y<8; ++y) for (x=0; x<8; ++x) if (adam7[y][x] == pass) - return y; - return 0xf; -} - -static png_uint_32 -png_pass_start_col(int pass) -{ - int x, y; - ++pass; - for (x=0; x<8; ++x) for (y=0; y<8; ++y) if (adam7[y][x] == pass) - return x; - return 0xf; -} - -static int -png_pass_row_shift(int pass) -{ - int x, y, base=(-1), inc=8; - ++pass; - for (y=0; y<8; ++y) for (x=0; x<8; ++x) if (adam7[y][x] == pass) - { - if (base == (-1)) - base = y; - else if (base == y) - {} - else if (inc == y-base) - base=y; - else if (inc == 8) - inc = y-base, base=y; - else if (inc != y-base) - return 0xff; /* error - more than one 'inc' value! */ - } - - if (base == (-1)) return 0xfe; /* error - no row in pass! */ - - /* The shift is always 1, 2 or 3 - no pass has all the rows! */ - switch (inc) - { -case 2: return 1; -case 4: return 2; -case 8: return 3; -default: break; - } - - /* error - unrecognized 'inc' */ - return (inc << 8) + 0xfd; -} - -static int -png_pass_col_shift(int pass) -{ - int x, y, base=(-1), inc=8; - ++pass; - for (x=0; x<8; ++x) for (y=0; y<8; ++y) if (adam7[y][x] == pass) - { - if (base == (-1)) - base = x; - else if (base == x) - {} - else if (inc == x-base) - base=x; - else if (inc == 8) - inc = x-base, base=x; - else if (inc != x-base) - return 0xff; /* error - more than one 'inc' value! */ - } - - if (base == (-1)) return 0xfe; /* error - no row in pass! */ - - /* The shift is always 1, 2 or 3 - no pass has all the rows! */ - switch (inc) - { -case 1: return 0; /* pass 7 has all the columns */ -case 2: return 1; -case 4: return 2; -case 8: return 3; -default: break; - } - - /* error - unrecognized 'inc' */ - return (inc << 8) + 0xfd; -} - -static png_uint_32 -png_row_from_pass_row(png_uint_32 yIn, int pass) -{ - /* By examination of the array: */ - switch (pass) - { -case 0: return yIn * 8; -case 1: return yIn * 8; -case 2: return yIn * 8 + 4; -case 3: return yIn * 4; -case 4: return yIn * 4 + 2; -case 5: return yIn * 2; -case 6: return yIn * 2 + 1; -default: break; - } - - return 0xff; /* bad pass number */ -} - -static png_uint_32 -png_col_from_pass_col(png_uint_32 xIn, int pass) -{ - /* By examination of the array: */ - switch (pass) - { -case 0: return xIn * 8; -case 1: return xIn * 8 + 4; -case 2: return xIn * 4; -case 3: return xIn * 4 + 2; -case 4: return xIn * 2; -case 5: return xIn * 2 + 1; -case 6: return xIn; -default: break; - } - - return 0xff; /* bad pass number */ -} - -static int -png_row_in_interlace_pass(png_uint_32 y, int pass) -{ - /* Is row 'y' in pass 'pass'? */ - int x; - y &= 7; - ++pass; - for (x=0; x<8; ++x) if (adam7[y][x] == pass) - return 1; - - return 0; -} - -static int -png_col_in_interlace_pass(png_uint_32 x, int pass) -{ - /* Is column 'x' in pass 'pass'? */ - int y; - x &= 7; - ++pass; - for (y=0; y<8; ++y) if (adam7[y][x] == pass) - return 1; - - return 0; -} - -static png_uint_32 -png_pass_rows(png_uint_32 height, int pass) -{ - png_uint_32 tiles = height>>3; - png_uint_32 rows = 0; - unsigned int x, y; - - height &= 7; - ++pass; - for (y=0; y<8; ++y) for (x=0; x<8; ++x) if (adam7[y][x] == pass) - { - rows += tiles; - if (y < height) ++rows; - break; /* i.e. break the 'x', column, loop. */ - } - - return rows; -} - -static png_uint_32 -png_pass_cols(png_uint_32 width, int pass) -{ - png_uint_32 tiles = width>>3; - png_uint_32 cols = 0; - unsigned int x, y; - - width &= 7; - ++pass; - for (x=0; x<8; ++x) for (y=0; y<8; ++y) if (adam7[y][x] == pass) - { - cols += tiles; - if (x < width) ++cols; - break; /* i.e. break the 'y', row, loop. */ - } - - return cols; -} - -static void -perform_interlace_macro_validation(void) -{ - /* The macros to validate, first those that depend only on pass: - * - * PNG_PASS_START_ROW(pass) - * PNG_PASS_START_COL(pass) - * PNG_PASS_ROW_SHIFT(pass) - * PNG_PASS_COL_SHIFT(pass) - */ - int pass; - - for (pass=0; pass<7; ++pass) - { - png_uint_32 m, f, v; - - m = PNG_PASS_START_ROW(pass); - f = png_pass_start_row(pass); - if (m != f) - { - fprintf(stderr, "PNG_PASS_START_ROW(%d) = %u != %x\n", pass, m, f); - exit(99); - } - - m = PNG_PASS_START_COL(pass); - f = png_pass_start_col(pass); - if (m != f) - { - fprintf(stderr, "PNG_PASS_START_COL(%d) = %u != %x\n", pass, m, f); - exit(99); - } - - m = PNG_PASS_ROW_SHIFT(pass); - f = png_pass_row_shift(pass); - if (m != f) - { - fprintf(stderr, "PNG_PASS_ROW_SHIFT(%d) = %u != %x\n", pass, m, f); - exit(99); - } - - m = PNG_PASS_COL_SHIFT(pass); - f = png_pass_col_shift(pass); - if (m != f) - { - fprintf(stderr, "PNG_PASS_COL_SHIFT(%d) = %u != %x\n", pass, m, f); - exit(99); - } - - /* Macros that depend on the image or sub-image height too: - * - * PNG_PASS_ROWS(height, pass) - * PNG_PASS_COLS(width, pass) - * PNG_ROW_FROM_PASS_ROW(yIn, pass) - * PNG_COL_FROM_PASS_COL(xIn, pass) - * PNG_ROW_IN_INTERLACE_PASS(y, pass) - * PNG_COL_IN_INTERLACE_PASS(x, pass) - */ - for (v=0;;) - { - /* The first two tests overflow if the pass row or column is outside - * the possible range for a 32-bit result. In fact the values should - * never be outside the range for a 31-bit result, but checking for 32 - * bits here ensures that if an app uses a bogus pass row or column - * (just so long as it fits in a 32 bit integer) it won't get a - * possibly dangerous overflow. - */ - /* First the base 0 stuff: */ - if (v < png_pass_rows(0xFFFFFFFFU, pass)) - { - m = PNG_ROW_FROM_PASS_ROW(v, pass); - f = png_row_from_pass_row(v, pass); - if (m != f) - { - fprintf(stderr, "PNG_ROW_FROM_PASS_ROW(%u, %d) = %u != %x\n", - v, pass, m, f); - exit(99); - } - } - - if (v < png_pass_cols(0xFFFFFFFFU, pass)) - { - m = PNG_COL_FROM_PASS_COL(v, pass); - f = png_col_from_pass_col(v, pass); - if (m != f) - { - fprintf(stderr, "PNG_COL_FROM_PASS_COL(%u, %d) = %u != %x\n", - v, pass, m, f); - exit(99); - } - } - - m = PNG_ROW_IN_INTERLACE_PASS(v, pass); - f = png_row_in_interlace_pass(v, pass); - if (m != f) - { - fprintf(stderr, "PNG_ROW_IN_INTERLACE_PASS(%u, %d) = %u != %x\n", - v, pass, m, f); - exit(99); - } - - m = PNG_COL_IN_INTERLACE_PASS(v, pass); - f = png_col_in_interlace_pass(v, pass); - if (m != f) - { - fprintf(stderr, "PNG_COL_IN_INTERLACE_PASS(%u, %d) = %u != %x\n", - v, pass, m, f); - exit(99); - } - - /* Then the base 1 stuff: */ - ++v; - m = PNG_PASS_ROWS(v, pass); - f = png_pass_rows(v, pass); - if (m != f) - { - fprintf(stderr, "PNG_PASS_ROWS(%u, %d) = %u != %x\n", - v, pass, m, f); - exit(99); - } - - m = PNG_PASS_COLS(v, pass); - f = png_pass_cols(v, pass); - if (m != f) - { - fprintf(stderr, "PNG_PASS_COLS(%u, %d) = %u != %x\n", - v, pass, m, f); - exit(99); - } - - /* Move to the next v - the stepping algorithm starts skipping - * values above 1024. - */ - if (v > 1024) - { - if (v == PNG_UINT_31_MAX) - break; - - v = (v << 1) ^ v; - if (v >= PNG_UINT_31_MAX) - v = PNG_UINT_31_MAX-1; - } - } - } -} - -/* Test color encodings. These values are back-calculated from the published - * chromaticities. The values are accurate to about 14 decimal places; 15 are - * given. These values are much more accurate than the ones given in the spec, - * which typically don't exceed 4 decimal places. This allows testing of the - * libpng code to its theoretical accuracy of 4 decimal places. (If pngvalid - * used the published errors the 'slack' permitted would have to be +/-.5E-4 or - * more.) - * - * The png_modifier code assumes that encodings[0] is sRGB and treats it - * specially: do not change the first entry in this list! - */ -static const color_encoding test_encodings[] = -{ -/* sRGB: must be first in this list! */ -/*gamma:*/ { 1/2.2, -/*red: */ { 0.412390799265959, 0.212639005871510, 0.019330818715592 }, -/*green:*/ { 0.357584339383878, 0.715168678767756, 0.119194779794626 }, -/*blue: */ { 0.180480788401834, 0.072192315360734, 0.950532152249660} }, -/* Kodak ProPhoto (wide gamut) */ -/*gamma:*/ { 1/1.6 /*approximate: uses 1.8 power law compared to sRGB 2.4*/, -/*red: */ { 0.797760489672303, 0.288071128229293, 0.000000000000000 }, -/*green:*/ { 0.135185837175740, 0.711843217810102, 0.000000000000000 }, -/*blue: */ { 0.031349349581525, 0.000085653960605, 0.825104602510460} }, -/* Adobe RGB (1998) */ -/*gamma:*/ { 1/(2+51./256), -/*red: */ { 0.576669042910131, 0.297344975250536, 0.027031361386412 }, -/*green:*/ { 0.185558237906546, 0.627363566255466, 0.070688852535827 }, -/*blue: */ { 0.188228646234995, 0.075291458493998, 0.991337536837639} }, -/* Adobe Wide Gamut RGB */ -/*gamma:*/ { 1/(2+51./256), -/*red: */ { 0.716500716779386, 0.258728243040113, 0.000000000000000 }, -/*green:*/ { 0.101020574397477, 0.724682314948566, 0.051211818965388 }, -/*blue: */ { 0.146774385252705, 0.016589442011321, 0.773892783545073} }, -/* Fake encoding which selects just the green channel */ -/*gamma:*/ { 1.45/2.2, /* the 'Mac' gamma */ -/*red: */ { 0.716500716779386, 0.000000000000000, 0.000000000000000 }, -/*green:*/ { 0.101020574397477, 1.000000000000000, 0.051211818965388 }, -/*blue: */ { 0.146774385252705, 0.000000000000000, 0.773892783545073} }, -}; - -/* signal handler - * - * This attempts to trap signals and escape without crashing. It needs a - * context pointer so that it can throw an exception (call longjmp) to recover - * from the condition; this is handled by making the png_modifier used by 'main' - * into a global variable. - */ -static png_modifier pm; - -static void signal_handler(int signum) -{ - - size_t pos = 0; - char msg[64]; - - pos = safecat(msg, sizeof msg, pos, "caught signal: "); - - switch (signum) - { - case SIGABRT: - pos = safecat(msg, sizeof msg, pos, "abort"); - break; - - case SIGFPE: - pos = safecat(msg, sizeof msg, pos, "floating point exception"); - break; - - case SIGILL: - pos = safecat(msg, sizeof msg, pos, "illegal instruction"); - break; - - case SIGINT: - pos = safecat(msg, sizeof msg, pos, "interrupt"); - break; - - case SIGSEGV: - pos = safecat(msg, sizeof msg, pos, "invalid memory access"); - break; - - case SIGTERM: - pos = safecat(msg, sizeof msg, pos, "termination request"); - break; - - default: - pos = safecat(msg, sizeof msg, pos, "unknown "); - pos = safecatn(msg, sizeof msg, pos, signum); - break; - } - - store_log(&pm.this, NULL/*png_structp*/, msg, 1/*error*/); - - /* And finally throw an exception so we can keep going, unless this is - * SIGTERM in which case stop now. - */ - if (signum != SIGTERM) - { - struct exception_context *the_exception_context = - &pm.this.exception_context; - - Throw &pm.this; - } - - else - exit(1); -} - -/* main program */ -int main(int argc, char **argv) -{ - int summary = 1; /* Print the error summary at the end */ - int memstats = 0; /* Print memory statistics at the end */ - - /* Create the given output file on success: */ - const char *touch = NULL; - - /* This is an array of standard gamma values (believe it or not I've seen - * every one of these mentioned somewhere.) - * - * In the following list the most useful values are first! - */ - static double - gammas[]={2.2, 1.0, 2.2/1.45, 1.8, 1.5, 2.4, 2.5, 2.62, 2.9}; - - /* This records the command and arguments: */ - size_t cp = 0; - char command[1024]; - - anon_context(&pm.this); - - gnu_volatile(summary) - gnu_volatile(memstats) - gnu_volatile(touch) - - /* Add appropriate signal handlers, just the ANSI specified ones: */ - signal(SIGABRT, signal_handler); - signal(SIGFPE, signal_handler); - signal(SIGILL, signal_handler); - signal(SIGINT, signal_handler); - signal(SIGSEGV, signal_handler); - signal(SIGTERM, signal_handler); - -#ifdef HAVE_FEENABLEEXCEPT - /* Only required to enable FP exceptions on platforms where they start off - * disabled; this is not necessary but if it is not done pngvalid will likely - * end up ignoring FP conditions that other platforms fault. - */ - feenableexcept(FE_DIVBYZERO | FE_INVALID | FE_OVERFLOW); -#endif - - modifier_init(&pm); - - /* Preallocate the image buffer, because we know how big it needs to be, - * note that, for testing purposes, it is deliberately mis-aligned by tag - * bytes either side. All rows have an additional five bytes of padding for - * overwrite checking. - */ - store_ensure_image(&pm.this, NULL, 2, TRANSFORM_ROWMAX, TRANSFORM_HEIGHTMAX); - - /* Don't give argv[0], it's normally some horrible libtool string: */ - cp = safecat(command, sizeof command, cp, "pngvalid"); - - /* Default to error on warning: */ - pm.this.treat_warnings_as_errors = 1; - - /* Default assume_16_bit_calculations appropriately; this tells the checking - * code that 16-bit arithmetic is used for 8-bit samples when it would make a - * difference. - */ - pm.assume_16_bit_calculations = PNG_LIBPNG_VER >= 10700; - - /* Currently 16 bit expansion happens at the end of the pipeline, so the - * calculations are done in the input bit depth not the output. - * - * TODO: fix this - */ - pm.calculations_use_input_precision = 1U; - - /* Store the test gammas */ - pm.gammas = gammas; - pm.ngammas = ARRAY_SIZE(gammas); - pm.ngamma_tests = 0; /* default to off */ - - /* Low bit depth gray images don't do well in the gamma tests, until - * this is fixed turn them off for some gamma cases: - */ -# ifdef PNG_WRITE_tRNS_SUPPORTED - pm.test_tRNS = 1; -# endif - pm.test_lbg = PNG_LIBPNG_VER >= 10600; - pm.test_lbg_gamma_threshold = 1; - pm.test_lbg_gamma_transform = PNG_LIBPNG_VER >= 10600; - pm.test_lbg_gamma_sbit = 1; - pm.test_lbg_gamma_composition = PNG_LIBPNG_VER >= 10700; - - /* And the test encodings */ - pm.encodings = test_encodings; - pm.nencodings = ARRAY_SIZE(test_encodings); - -# if PNG_LIBPNG_VER < 10700 - pm.sbitlow = 8U; /* because libpng doesn't do sBIT below 8! */ -# else - pm.sbitlow = 1U; -# endif - - /* The following allows results to pass if they correspond to anything in the - * transformed range [input-.5,input+.5]; this is is required because of the - * way libpng treates the 16_TO_8 flag when building the gamma tables in - * releases up to 1.6.0. - * - * TODO: review this - */ - pm.use_input_precision_16to8 = 1U; - pm.use_input_precision_sbit = 1U; /* because libpng now rounds sBIT */ - - /* Some default values (set the behavior for 'make check' here). - * These values simply control the maximum error permitted in the gamma - * transformations. The practical limits for human perception are described - * below (the setting for maxpc16), however for 8 bit encodings it isn't - * possible to meet the accepted capabilities of human vision - i.e. 8 bit - * images can never be good enough, regardless of encoding. - */ - pm.maxout8 = .1; /* Arithmetic error in *encoded* value */ - pm.maxabs8 = .00005; /* 1/20000 */ - pm.maxcalc8 = 1./255; /* +/-1 in 8 bits for compose errors */ - pm.maxpc8 = .499; /* I.e., .499% fractional error */ - pm.maxout16 = .499; /* Error in *encoded* value */ - pm.maxabs16 = .00005;/* 1/20000 */ - pm.maxcalc16 =1./65535;/* +/-1 in 16 bits for compose errors */ -# if PNG_LIBPNG_VER < 10700 - pm.maxcalcG = 1./((1<38149 by the following: - */ - pm.maxpc16 = .005; /* I.e., 1/200% - 1/20000 */ - - /* Now parse the command line options. */ - while (--argc >= 1) - { - int catmore = 0; /* Set if the argument has an argument. */ - - /* Record each argument for posterity: */ - cp = safecat(command, sizeof command, cp, " "); - cp = safecat(command, sizeof command, cp, *++argv); - - if (strcmp(*argv, "-v") == 0) - pm.this.verbose = 1; - - else if (strcmp(*argv, "-l") == 0) - pm.log = 1; - - else if (strcmp(*argv, "-q") == 0) - summary = pm.this.verbose = pm.log = 0; - - else if (strcmp(*argv, "-w") == 0 || - strcmp(*argv, "--strict") == 0) - pm.this.treat_warnings_as_errors = 1; /* NOTE: this is the default! */ - - else if (strcmp(*argv, "--nostrict") == 0) - pm.this.treat_warnings_as_errors = 0; - - else if (strcmp(*argv, "--speed") == 0) - pm.this.speed = 1, pm.ngamma_tests = pm.ngammas, pm.test_standard = 0, - summary = 0; - - else if (strcmp(*argv, "--memory") == 0) - memstats = 1; - - else if (strcmp(*argv, "--size") == 0) - pm.test_size = 1; - - else if (strcmp(*argv, "--nosize") == 0) - pm.test_size = 0; - - else if (strcmp(*argv, "--standard") == 0) - pm.test_standard = 1; - - else if (strcmp(*argv, "--nostandard") == 0) - pm.test_standard = 0; - - else if (strcmp(*argv, "--transform") == 0) - pm.test_transform = 1; - - else if (strcmp(*argv, "--notransform") == 0) - pm.test_transform = 0; - -#ifdef PNG_READ_TRANSFORMS_SUPPORTED - else if (strncmp(*argv, "--transform-disable=", - sizeof "--transform-disable") == 0) - { - pm.test_transform = 1; - transform_disable(*argv + sizeof "--transform-disable"); - } - - else if (strncmp(*argv, "--transform-enable=", - sizeof "--transform-enable") == 0) - { - pm.test_transform = 1; - transform_enable(*argv + sizeof "--transform-enable"); - } -#endif /* PNG_READ_TRANSFORMS_SUPPORTED */ - - else if (strcmp(*argv, "--gamma") == 0) - { - /* Just do two gamma tests here (2.2 and linear) for speed: */ - pm.ngamma_tests = 2U; - pm.test_gamma_threshold = 1; - pm.test_gamma_transform = 1; - pm.test_gamma_sbit = 1; - pm.test_gamma_scale16 = 1; - pm.test_gamma_background = 1; /* composition */ - pm.test_gamma_alpha_mode = 1; - } - - else if (strcmp(*argv, "--nogamma") == 0) - pm.ngamma_tests = 0; - - else if (strcmp(*argv, "--gamma-threshold") == 0) - pm.ngamma_tests = 2U, pm.test_gamma_threshold = 1; - - else if (strcmp(*argv, "--nogamma-threshold") == 0) - pm.test_gamma_threshold = 0; - - else if (strcmp(*argv, "--gamma-transform") == 0) - pm.ngamma_tests = 2U, pm.test_gamma_transform = 1; - - else if (strcmp(*argv, "--nogamma-transform") == 0) - pm.test_gamma_transform = 0; - - else if (strcmp(*argv, "--gamma-sbit") == 0) - pm.ngamma_tests = 2U, pm.test_gamma_sbit = 1; - - else if (strcmp(*argv, "--nogamma-sbit") == 0) - pm.test_gamma_sbit = 0; - - else if (strcmp(*argv, "--gamma-16-to-8") == 0) - pm.ngamma_tests = 2U, pm.test_gamma_scale16 = 1; - - else if (strcmp(*argv, "--nogamma-16-to-8") == 0) - pm.test_gamma_scale16 = 0; - - else if (strcmp(*argv, "--gamma-background") == 0) - pm.ngamma_tests = 2U, pm.test_gamma_background = 1; - - else if (strcmp(*argv, "--nogamma-background") == 0) - pm.test_gamma_background = 0; - - else if (strcmp(*argv, "--gamma-alpha-mode") == 0) - pm.ngamma_tests = 2U, pm.test_gamma_alpha_mode = 1; - - else if (strcmp(*argv, "--nogamma-alpha-mode") == 0) - pm.test_gamma_alpha_mode = 0; - - else if (strcmp(*argv, "--expand16") == 0) - pm.test_gamma_expand16 = 1; - - else if (strcmp(*argv, "--noexpand16") == 0) - pm.test_gamma_expand16 = 0; - - else if (strcmp(*argv, "--low-depth-gray") == 0) - pm.test_lbg = pm.test_lbg_gamma_threshold = - pm.test_lbg_gamma_transform = pm.test_lbg_gamma_sbit = - pm.test_lbg_gamma_composition = 1; - - else if (strcmp(*argv, "--nolow-depth-gray") == 0) - pm.test_lbg = pm.test_lbg_gamma_threshold = - pm.test_lbg_gamma_transform = pm.test_lbg_gamma_sbit = - pm.test_lbg_gamma_composition = 0; - -# ifdef PNG_WRITE_tRNS_SUPPORTED - else if (strcmp(*argv, "--tRNS") == 0) - pm.test_tRNS = 1; -# endif - - else if (strcmp(*argv, "--notRNS") == 0) - pm.test_tRNS = 0; - - else if (strcmp(*argv, "--more-gammas") == 0) - pm.ngamma_tests = 3U; - - else if (strcmp(*argv, "--all-gammas") == 0) - pm.ngamma_tests = pm.ngammas; - - else if (strcmp(*argv, "--progressive-read") == 0) - pm.this.progressive = 1; - - else if (strcmp(*argv, "--use-update-info") == 0) - ++pm.use_update_info; /* Can call multiple times */ - - else if (strcmp(*argv, "--interlace") == 0) - { -# if CAN_WRITE_INTERLACE - pm.interlace_type = PNG_INTERLACE_ADAM7; -# else /* !CAN_WRITE_INTERLACE */ - fprintf(stderr, "pngvalid: no write interlace support\n"); - return SKIP; -# endif /* !CAN_WRITE_INTERLACE */ - } - - else if (strcmp(*argv, "--use-input-precision") == 0) - pm.use_input_precision = 1U; - - else if (strcmp(*argv, "--use-calculation-precision") == 0) - pm.use_input_precision = 0; - - else if (strcmp(*argv, "--calculations-use-input-precision") == 0) - pm.calculations_use_input_precision = 1U; - - else if (strcmp(*argv, "--assume-16-bit-calculations") == 0) - pm.assume_16_bit_calculations = 1U; - - else if (strcmp(*argv, "--calculations-follow-bit-depth") == 0) - pm.calculations_use_input_precision = - pm.assume_16_bit_calculations = 0; - - else if (strcmp(*argv, "--exhaustive") == 0) - pm.test_exhaustive = 1; - - else if (argc > 1 && strcmp(*argv, "--sbitlow") == 0) - --argc, pm.sbitlow = (png_byte)atoi(*++argv), catmore = 1; - - else if (argc > 1 && strcmp(*argv, "--touch") == 0) - --argc, touch = *++argv, catmore = 1; - - else if (argc > 1 && strncmp(*argv, "--max", 5) == 0) - { - --argc; - - if (strcmp(5+*argv, "abs8") == 0) - pm.maxabs8 = atof(*++argv); - - else if (strcmp(5+*argv, "abs16") == 0) - pm.maxabs16 = atof(*++argv); - - else if (strcmp(5+*argv, "calc8") == 0) - pm.maxcalc8 = atof(*++argv); - - else if (strcmp(5+*argv, "calc16") == 0) - pm.maxcalc16 = atof(*++argv); - - else if (strcmp(5+*argv, "out8") == 0) - pm.maxout8 = atof(*++argv); - - else if (strcmp(5+*argv, "out16") == 0) - pm.maxout16 = atof(*++argv); - - else if (strcmp(5+*argv, "pc8") == 0) - pm.maxpc8 = atof(*++argv); - - else if (strcmp(5+*argv, "pc16") == 0) - pm.maxpc16 = atof(*++argv); - - else - { - fprintf(stderr, "pngvalid: %s: unknown 'max' option\n", *argv); - exit(99); - } - - catmore = 1; - } - - else if (strcmp(*argv, "--log8") == 0) - --argc, pm.log8 = atof(*++argv), catmore = 1; - - else if (strcmp(*argv, "--log16") == 0) - --argc, pm.log16 = atof(*++argv), catmore = 1; - -#ifdef PNG_SET_OPTION_SUPPORTED - else if (strncmp(*argv, "--option=", 9) == 0) - { - /* Syntax of the argument is