mbedtls/tests/ssl-opt.sh

1438 lines
54 KiB
Bash
Raw Normal View History

2014-02-20 10:01:30 +00:00
#!/bin/sh
# Test various options that are not covered by compat.sh
#
# Here the goal is not to cover every ciphersuite/version, but
# rather specific options (max fragment length, truncated hmac, etc)
# or procedures (session resumption from cache or ticket, renego, etc).
#
# Assumes all options are compiled in.
2014-02-25 16:14:15 +00:00
set -u
# test if it is defined from the environment before assining default
# if yes, assume it means it's a build with all the options we need (SSLv2)
if [ -n "${OPENSSL_CMD:-}" ]; then
OPENSSL_OK=1
else
OPENSSL_OK=0
fi
# default values, can be overriden by the environment
: ${P_SRV:=../programs/ssl/ssl_server2}
: ${P_CLI:=../programs/ssl/ssl_client2}
: ${OPENSSL_CMD:=openssl} # OPENSSL would conflict with the build system
2014-02-20 10:01:30 +00:00
O_SRV="$OPENSSL_CMD s_server -www -cert data_files/server5.crt -key data_files/server5.key"
O_CLI="echo 'GET / HTTP/1.0' | $OPENSSL_CMD s_client"
2014-02-25 16:14:15 +00:00
2014-02-21 08:47:37 +00:00
TESTS=0
FAILS=0
2014-04-07 11:24:21 +00:00
CONFIG_H='../include/polarssl/config.h'
2014-02-26 15:35:27 +00:00
MEMCHECK=0
2014-03-13 18:17:53 +00:00
FILTER='.*'
if [ "$OPENSSL_OK" -gt 0 ]; then
EXCLUDE='^$'
else
EXCLUDE='SSLv2'
fi
2014-02-26 15:35:27 +00:00
print_usage() {
echo "Usage: $0 [options]"
2014-03-13 18:17:53 +00:00
echo -e " -h|--help\tPrint this help."
echo -e " -m|--memcheck\tCheck memory leaks and errors."
echo -e " -f|--filter\tOnly matching tests are executed (default: '$FILTER')"
echo -e " -e|--exclude\tMatching tests are excluded (default: '$EXCLUDE')"
2014-02-26 15:35:27 +00:00
}
get_options() {
while [ $# -gt 0 ]; do
case "$1" in
2014-03-13 18:17:53 +00:00
-f|--filter)
shift; FILTER=$1
;;
-e|--exclude)
shift; EXCLUDE=$1
;;
2014-02-26 15:35:27 +00:00
-m|--memcheck)
MEMCHECK=1
;;
-h|--help)
print_usage
exit 0
;;
*)
2014-05-22 13:47:58 +00:00
echo "Unknown argument: '$1'"
2014-02-26 15:35:27 +00:00
print_usage
exit 1
;;
esac
shift
done
}
2014-02-21 08:20:14 +00:00
# print_name <name>
print_name() {
echo -n "$1 "
LEN=`echo "$1" | wc -c`
LEN=`echo 72 - $LEN | bc`
for i in `seq 1 $LEN`; do echo -n '.'; done
echo -n ' '
2014-02-21 08:47:37 +00:00
TESTS=`echo $TESTS + 1 | bc`
2014-02-21 08:20:14 +00:00
}
# fail <message>
fail() {
echo "FAIL"
2014-02-27 14:37:24 +00:00
echo " ! $1"
2014-02-21 08:47:37 +00:00
2014-05-28 21:06:50 +00:00
cp $SRV_OUT o-srv-${TESTS}.log
cp $CLI_OUT o-cli-${TESTS}.log
2014-02-27 14:37:24 +00:00
echo " ! outputs saved to o-srv-${TESTS}.log and o-cli-${TESTS}.log"
2014-02-21 08:47:37 +00:00
FAILS=`echo $FAILS + 1 | bc`
2014-02-21 08:20:14 +00:00
}
2014-02-25 15:42:31 +00:00
# is_polar <cmd_line>
is_polar() {
echo "$1" | grep 'ssl_server2\|ssl_client2' > /dev/null
}
2014-02-26 15:35:27 +00:00
# has_mem_err <log_file_name>
has_mem_err() {
if ( grep -F 'All heap blocks were freed -- no leaks are possible' "$1" &&
grep -F 'ERROR SUMMARY: 0 errors from 0 contexts' "$1" ) > /dev/null
then
return 1 # false: does not have errors
else
return 0 # true: has errors
fi
}
2014-06-20 16:41:11 +00:00
# wait for server to start: two versions depending on lsof availability
wait_server_start() {
if which lsof >/dev/null; then
# make sure we don't loop forever
( sleep "$DOG_DELAY"; echo "SERVERSTART TIMEOUT"; kill $MAIN_PID ) &
WATCHDOG_PID=$!
# make a tight loop, server usually takes less than 1 sec to start
until lsof -nbi TCP:"$PORT" | grep LISTEN >/dev/null; do :; done
kill $WATCHDOG_PID
wait $WATCHDOG_PID
else
sleep "$START_DELAY"
fi
}
2014-02-25 16:14:15 +00:00
# Usage: run_test name srv_cmd cli_cmd cli_exit [option [...]]
2014-02-20 10:01:30 +00:00
# Options: -s pattern pattern that must be present in server output
# -c pattern pattern that must be present in client output
# -S pattern pattern that must be absent in server output
# -C pattern pattern that must be absent in client output
run_test() {
2014-02-25 16:14:15 +00:00
NAME="$1"
SRV_CMD="$2"
CLI_CMD="$3"
CLI_EXPECT="$4"
shift 4
2014-03-13 18:17:53 +00:00
if echo "$NAME" | grep "$FILTER" | grep -v "$EXCLUDE" >/dev/null; then :
else
return
fi
2014-02-25 16:14:15 +00:00
print_name "$NAME"
2014-02-20 10:01:30 +00:00
2014-02-26 15:35:27 +00:00
# prepend valgrind to our commands if active
if [ "$MEMCHECK" -gt 0 ]; then
if is_polar "$SRV_CMD"; then
SRV_CMD="valgrind --leak-check=full $SRV_CMD"
fi
if is_polar "$CLI_CMD"; then
CLI_CMD="valgrind --leak-check=full $CLI_CMD"
fi
fi
2014-02-20 10:01:30 +00:00
# run the commands
2014-05-28 21:06:50 +00:00
echo "$SRV_CMD" > $SRV_OUT
$SRV_CMD >> $SRV_OUT 2>&1 &
2014-02-20 10:01:30 +00:00
SRV_PID=$!
2014-06-20 16:41:11 +00:00
wait_server_start
2014-05-28 21:06:50 +00:00
echo "$CLI_CMD" > $CLI_OUT
eval "$CLI_CMD" >> $CLI_OUT 2>&1
2014-02-20 10:01:30 +00:00
CLI_EXIT=$?
2014-05-28 21:06:50 +00:00
echo "EXIT: $CLI_EXIT" >> $CLI_OUT
2014-02-25 16:14:15 +00:00
if is_polar "$SRV_CMD"; then
# start watchdog in case SERVERQUIT fails
2014-06-20 16:41:11 +00:00
( sleep "$DOG_DELAY"; echo "SERVERQUIT TIMEOUT"; kill $MAIN_PID ) &
WATCHDOG_PID=$!
# psk is useful when server only has bad certs
$P_CLI request_page=SERVERQUIT tickets=0 auth_mode=none psk=abc123 \
crt_file=data_files/cli2.crt key_file=data_files/cli2.key \
>/dev/null
wait $SRV_PID
kill $WATCHDOG_PID
wait $WATCHDOG_PID
2014-02-25 15:42:31 +00:00
else
kill $SRV_PID
wait $SRV_PID
2014-02-25 15:42:31 +00:00
fi
# check if the client and server went at least to the handshake stage
2014-05-22 13:47:58 +00:00
# (useful to avoid tests with only negative assertions and non-zero
2014-02-25 15:42:31 +00:00
# expected client exit to incorrectly succeed in case of catastrophic
# failure)
2014-02-25 16:14:15 +00:00
if is_polar "$SRV_CMD"; then
2014-05-28 21:06:50 +00:00
if grep "Performing the SSL/TLS handshake" $SRV_OUT >/dev/null; then :;
2014-02-25 15:42:31 +00:00
else
fail "server failed to start"
return
fi
fi
2014-02-25 16:14:15 +00:00
if is_polar "$CLI_CMD"; then
2014-05-28 21:06:50 +00:00
if grep "Performing the SSL/TLS handshake" $CLI_OUT >/dev/null; then :;
2014-02-25 15:42:31 +00:00
else
fail "client failed to start"
return
fi
fi
2014-02-21 08:20:14 +00:00
# check server exit code
if [ $? != 0 ]; then
fail "server fail"
return
fi
2014-02-20 10:01:30 +00:00
# check client exit code
2014-02-25 16:14:15 +00:00
if [ \( "$CLI_EXPECT" = 0 -a "$CLI_EXIT" != 0 \) -o \
\( "$CLI_EXPECT" != 0 -a "$CLI_EXIT" = 0 \) ]
2014-02-20 16:19:59 +00:00
then
2014-02-21 11:12:23 +00:00
fail "bad client exit code"
2014-02-20 10:01:30 +00:00
return
fi
2014-02-26 15:35:27 +00:00
# check other assertions
2014-02-20 10:01:30 +00:00
while [ $# -gt 0 ]
do
case $1 in
"-s")
2014-05-28 21:06:50 +00:00
if grep "$2" $SRV_OUT >/dev/null; then :; else
2014-02-21 08:20:14 +00:00
fail "-s $2"
2014-02-20 10:01:30 +00:00
return
fi
;;
"-c")
2014-05-28 21:06:50 +00:00
if grep "$2" $CLI_OUT >/dev/null; then :; else
2014-02-21 08:20:14 +00:00
fail "-c $2"
2014-02-20 10:01:30 +00:00
return
fi
;;
"-S")
2014-05-28 21:06:50 +00:00
if grep "$2" $SRV_OUT >/dev/null; then
2014-02-21 08:20:14 +00:00
fail "-S $2"
2014-02-20 10:01:30 +00:00
return
fi
;;
"-C")
2014-05-28 21:06:50 +00:00
if grep "$2" $CLI_OUT >/dev/null; then
2014-02-21 08:20:14 +00:00
fail "-C $2"
2014-02-20 10:01:30 +00:00
return
fi
;;
*)
2014-05-22 13:47:58 +00:00
echo "Unknown test: $1" >&2
2014-02-20 10:01:30 +00:00
exit 1
esac
shift 2
done
2014-02-26 15:35:27 +00:00
# check valgrind's results
if [ "$MEMCHECK" -gt 0 ]; then
2014-05-28 21:06:50 +00:00
if is_polar "$SRV_CMD" && has_mem_err $SRV_OUT; then
2014-02-26 15:35:27 +00:00
fail "Server has memory errors"
return
fi
2014-05-28 21:06:50 +00:00
if is_polar "$CLI_CMD" && has_mem_err $CLI_OUT; then
2014-02-26 15:35:27 +00:00
fail "Client has memory errors"
return
fi
fi
2014-02-20 10:01:30 +00:00
# if we're here, everything is ok
echo "PASS"
2014-05-28 21:06:50 +00:00
rm -f $SRV_OUT $CLI_OUT
2014-02-20 10:01:30 +00:00
}
cleanup() {
2014-05-28 21:06:50 +00:00
rm -f $CLI_OUT $SRV_OUT $SESSION
2014-06-20 16:41:11 +00:00
kill $SRV_PID >/dev/null 2>&1
kill $WATCHDOG_PID >/dev/null 2>&1
exit 1
}
2014-02-26 17:21:02 +00:00
#
# MAIN
#
get_options "$@"
# sanity checks, avoid an avalanche of errors
if [ ! -x "$P_SRV" ]; then
echo "Command '$P_SRV' is not an executable file"
exit 1
fi
if [ ! -x "$P_CLI" ]; then
echo "Command '$P_CLI' is not an executable file"
exit 1
fi
if which $OPENSSL_CMD >/dev/null 2>&1; then :; else
echo "Command '$OPENSSL_CMD' not found"
exit 1
fi
# used by watchdog
MAIN_PID="$$"
2014-06-20 16:41:11 +00:00
# be more patient with valgrind
if [ "$MEMCHECK" -gt 0 ]; then
START_DELAY=3
DOG_DELAY=30
else
START_DELAY=1
DOG_DELAY=10
fi
# Pick a "unique" port in the range 10000-19999.
PORT="0000$$"
PORT="1$(echo $PORT | tail -c 4)"
# fix commands to use this port
P_SRV="$P_SRV server_port=$PORT"
P_CLI="$P_CLI server_port=$PORT"
O_SRV="$O_SRV -accept $PORT"
O_CLI="$O_CLI -connect localhost:$PORT"
2014-05-28 21:06:50 +00:00
# Also pick a unique name for intermediate files
SRV_OUT="srv_out.$$"
CLI_OUT="cli_out.$$"
SESSION="session.$$"
trap cleanup INT TERM HUP
2014-02-20 10:01:30 +00:00
2014-02-25 13:18:30 +00:00
# Test for SSLv2 ClientHello
run_test "SSLv2 ClientHello #0 (reference)" \
"$P_SRV debug_level=3" \
2014-02-26 15:33:03 +00:00
"$O_CLI -no_ssl2" \
2014-02-25 13:18:30 +00:00
0 \
-S "parse client hello v2" \
-S "ssl_handshake returned"
# Adding a SSL2-only suite makes OpenSSL client send SSLv2 ClientHello
run_test "SSLv2 ClientHello #1 (actual test)" \
"$P_SRV debug_level=3" \
2014-02-25 16:14:15 +00:00
"$O_CLI -cipher 'DES-CBC-MD5:ALL'" \
2014-02-25 13:18:30 +00:00
0 \
-s "parse client hello v2" \
-S "ssl_handshake returned"
2014-02-20 16:19:59 +00:00
# Tests for Truncated HMAC extension
run_test "Truncated HMAC #0" \
2014-02-25 13:18:30 +00:00
"$P_SRV debug_level=5" \
"$P_CLI trunc_hmac=0 force_ciphersuite=TLS-RSA-WITH-AES-128-CBC-SHA" \
2014-02-20 16:19:59 +00:00
0 \
-s "dumping 'computed mac' (20 bytes)"
run_test "Truncated HMAC #1" \
2014-02-25 13:18:30 +00:00
"$P_SRV debug_level=5" \
"$P_CLI trunc_hmac=1 force_ciphersuite=TLS-RSA-WITH-AES-128-CBC-SHA" \
2014-02-20 10:01:30 +00:00
0 \
2014-02-20 10:43:46 +00:00
-s "dumping 'computed mac' (10 bytes)"
2014-02-20 16:19:59 +00:00
# Tests for Session Tickets
2014-02-25 16:14:15 +00:00
run_test "Session resume using tickets #1 (basic)" \
2014-02-25 13:18:30 +00:00
"$P_SRV debug_level=4 tickets=1" \
"$P_CLI debug_level=4 tickets=1 reconnect=1" \
2014-02-20 10:43:46 +00:00
0 \
2014-02-20 21:50:56 +00:00
-c "client hello, adding session ticket extension" \
-s "found session ticket extension" \
-s "server hello, adding session ticket extension" \
-c "found session_ticket extension" \
-c "parse new session ticket" \
2014-02-20 10:43:46 +00:00
-S "session successfully restored from cache" \
-s "session successfully restored from ticket" \
-s "a session has been resumed" \
-c "a session has been resumed"
2014-02-25 16:14:15 +00:00
run_test "Session resume using tickets #2 (cache disabled)" \
2014-02-25 13:18:30 +00:00
"$P_SRV debug_level=4 tickets=1 cache_max=0" \
"$P_CLI debug_level=4 tickets=1 reconnect=1" \
2014-02-21 08:18:13 +00:00
0 \
-c "client hello, adding session ticket extension" \
-s "found session ticket extension" \
-s "server hello, adding session ticket extension" \
-c "found session_ticket extension" \
-c "parse new session ticket" \
-S "session successfully restored from cache" \
-s "session successfully restored from ticket" \
-s "a session has been resumed" \
-c "a session has been resumed"
2014-02-25 16:14:15 +00:00
run_test "Session resume using tickets #3 (timeout)" \
2014-02-25 13:18:30 +00:00
"$P_SRV debug_level=4 tickets=1 cache_max=0 ticket_timeout=1" \
"$P_CLI debug_level=4 tickets=1 reconnect=1 reco_delay=2" \
2014-02-21 08:18:13 +00:00
0 \
-c "client hello, adding session ticket extension" \
-s "found session ticket extension" \
-s "server hello, adding session ticket extension" \
-c "found session_ticket extension" \
-c "parse new session ticket" \
-S "session successfully restored from cache" \
-S "session successfully restored from ticket" \
-S "a session has been resumed" \
-C "a session has been resumed"
2014-02-26 15:35:27 +00:00
run_test "Session resume using tickets #4 (openssl server)" \
"$O_SRV" \
2014-02-25 16:14:15 +00:00
"$P_CLI debug_level=4 tickets=1 reconnect=1" \
0 \
-c "client hello, adding session ticket extension" \
-c "found session_ticket extension" \
-c "parse new session ticket" \
-c "a session has been resumed"
2014-02-26 15:35:27 +00:00
run_test "Session resume using tickets #5 (openssl client)" \
2014-02-25 16:14:15 +00:00
"$P_SRV debug_level=4 tickets=1" \
2014-05-28 21:06:50 +00:00
"( $O_CLI -sess_out $SESSION; \
$O_CLI -sess_in $SESSION; \
rm -f $SESSION )" \
2014-02-25 16:14:15 +00:00
0 \
-s "found session ticket extension" \
-s "server hello, adding session ticket extension" \
-S "session successfully restored from cache" \
-s "session successfully restored from ticket" \
-s "a session has been resumed"
2014-02-20 21:50:56 +00:00
# Tests for Session Resume based on session-ID and cache
2014-02-20 16:19:59 +00:00
2014-02-20 21:50:56 +00:00
run_test "Session resume using cache #1 (tickets enabled on client)" \
2014-02-25 13:18:30 +00:00
"$P_SRV debug_level=4 tickets=0" \
"$P_CLI debug_level=4 tickets=1 reconnect=1" \
2014-02-20 10:43:46 +00:00
0 \
2014-02-20 21:50:56 +00:00
-c "client hello, adding session ticket extension" \
-s "found session ticket extension" \
-S "server hello, adding session ticket extension" \
-C "found session_ticket extension" \
-C "parse new session ticket" \
2014-02-20 10:43:46 +00:00
-s "session successfully restored from cache" \
-S "session successfully restored from ticket" \
-s "a session has been resumed" \
-c "a session has been resumed"
2014-02-20 21:50:56 +00:00
run_test "Session resume using cache #2 (tickets enabled on server)" \
2014-02-25 13:18:30 +00:00
"$P_SRV debug_level=4 tickets=1" \
"$P_CLI debug_level=4 tickets=0 reconnect=1" \
2014-02-20 10:43:46 +00:00
0 \
2014-02-20 21:50:56 +00:00
-C "client hello, adding session ticket extension" \
-S "found session ticket extension" \
-S "server hello, adding session ticket extension" \
-C "found session_ticket extension" \
-C "parse new session ticket" \
2014-02-20 10:43:46 +00:00
-s "session successfully restored from cache" \
-S "session successfully restored from ticket" \
-s "a session has been resumed" \
-c "a session has been resumed"
2014-02-20 21:50:56 +00:00
run_test "Session resume using cache #3 (cache_max=0)" \
2014-02-25 13:18:30 +00:00
"$P_SRV debug_level=4 tickets=0 cache_max=0" \
"$P_CLI debug_level=4 tickets=0 reconnect=1" \
2014-02-20 21:50:56 +00:00
0 \
-S "session successfully restored from cache" \
-S "session successfully restored from ticket" \
-S "a session has been resumed" \
-C "a session has been resumed"
run_test "Session resume using cache #4 (cache_max=1)" \
2014-02-25 13:18:30 +00:00
"$P_SRV debug_level=4 tickets=0 cache_max=1" \
"$P_CLI debug_level=4 tickets=0 reconnect=1" \
2014-02-20 21:50:56 +00:00
0 \
-s "session successfully restored from cache" \
-S "session successfully restored from ticket" \
-s "a session has been resumed" \
-c "a session has been resumed"
run_test "Session resume using cache #5 (timemout > delay)" \
2014-02-26 15:35:27 +00:00
"$P_SRV debug_level=4 tickets=0" \
2014-02-25 13:18:30 +00:00
"$P_CLI debug_level=4 tickets=0 reconnect=1 reco_delay=0" \
2014-02-20 21:50:56 +00:00
0 \
-s "session successfully restored from cache" \
-S "session successfully restored from ticket" \
-s "a session has been resumed" \
-c "a session has been resumed"
run_test "Session resume using cache #6 (timeout < delay)" \
2014-02-25 13:18:30 +00:00
"$P_SRV debug_level=4 tickets=0 cache_timeout=1" \
"$P_CLI debug_level=4 tickets=0 reconnect=1 reco_delay=2" \
2014-02-20 20:32:41 +00:00
0 \
-S "session successfully restored from cache" \
-S "session successfully restored from ticket" \
2014-02-20 21:50:56 +00:00
-S "a session has been resumed" \
-C "a session has been resumed"
2014-02-20 20:32:41 +00:00
2014-02-20 21:50:56 +00:00
run_test "Session resume using cache #7 (no timeout)" \
2014-02-25 13:18:30 +00:00
"$P_SRV debug_level=4 tickets=0 cache_timeout=0" \
"$P_CLI debug_level=4 tickets=0 reconnect=1 reco_delay=2" \
2014-02-20 20:32:41 +00:00
0 \
-s "session successfully restored from cache" \
-S "session successfully restored from ticket" \
-s "a session has been resumed" \
-c "a session has been resumed"
run_test "Session resume using cache #8 (openssl client)" \
"$P_SRV debug_level=4 tickets=0" \
2014-05-28 21:06:50 +00:00
"( $O_CLI -sess_out $SESSION; \
$O_CLI -sess_in $SESSION; \
rm -f $SESSION )" \
0 \
-s "found session ticket extension" \
-S "server hello, adding session ticket extension" \
-s "session successfully restored from cache" \
-S "session successfully restored from ticket" \
-s "a session has been resumed"
run_test "Session resume using cache #9 (openssl server)" \
"$O_SRV" \
"$P_CLI debug_level=4 tickets=0 reconnect=1" \
0 \
-C "found session_ticket extension" \
-C "parse new session ticket" \
-c "a session has been resumed"
2014-02-20 16:19:59 +00:00
# Tests for Max Fragment Length extension
run_test "Max fragment length #1" \
2014-02-25 13:18:30 +00:00
"$P_SRV debug_level=4" \
"$P_CLI debug_level=4" \
0 \
-C "client hello, adding max_fragment_length extension" \
-S "found max fragment length extension" \
-S "server hello, max_fragment_length extension" \
-C "found max_fragment_length extension"
run_test "Max fragment length #2" \
2014-02-25 13:18:30 +00:00
"$P_SRV debug_level=4" \
"$P_CLI debug_level=4 max_frag_len=4096" \
0 \
-c "client hello, adding max_fragment_length extension" \
-s "found max fragment length extension" \
-s "server hello, max_fragment_length extension" \
-c "found max_fragment_length extension"
run_test "Max fragment length #3" \
2014-02-25 13:18:30 +00:00
"$P_SRV debug_level=4 max_frag_len=4096" \
"$P_CLI debug_level=4" \
0 \
-C "client hello, adding max_fragment_length extension" \
-S "found max fragment length extension" \
-S "server hello, max_fragment_length extension" \
-C "found max_fragment_length extension"
2014-02-20 16:19:59 +00:00
# Tests for renegotiation
run_test "Renegotiation #0 (none)" \
2014-02-25 13:18:30 +00:00
"$P_SRV debug_level=4" \
"$P_CLI debug_level=4" \
2014-02-20 16:19:59 +00:00
0 \
-C "client hello, adding renegotiation extension" \
-s "received TLS_EMPTY_RENEGOTIATION_INFO" \
-S "found renegotiation extension" \
-s "server hello, secure renegotiation extension" \
-c "found renegotiation extension" \
2014-02-26 15:35:27 +00:00
-C "=> renegotiate" \
-S "=> renegotiate" \
2014-02-20 16:19:59 +00:00
-S "write hello request"
run_test "Renegotiation #1 (enabled, client-initiated)" \
"$P_SRV debug_level=4 renegotiation=1" \
"$P_CLI debug_level=4 renegotiation=1 renegotiate=1" \
2014-02-20 16:19:59 +00:00
0 \
-c "client hello, adding renegotiation extension" \
-s "received TLS_EMPTY_RENEGOTIATION_INFO" \
-s "found renegotiation extension" \
-s "server hello, secure renegotiation extension" \
-c "found renegotiation extension" \
2014-02-26 15:35:27 +00:00
-c "=> renegotiate" \
-s "=> renegotiate" \
2014-02-20 16:19:59 +00:00
-S "write hello request"
run_test "Renegotiation #2 (enabled, server-initiated)" \
"$P_SRV debug_level=4 renegotiation=1 renegotiate=1" \
"$P_CLI debug_level=4 renegotiation=1" \
2014-02-20 16:19:59 +00:00
0 \
-c "client hello, adding renegotiation extension" \
-s "received TLS_EMPTY_RENEGOTIATION_INFO" \
-s "found renegotiation extension" \
-s "server hello, secure renegotiation extension" \
-c "found renegotiation extension" \
2014-02-26 15:35:27 +00:00
-c "=> renegotiate" \
-s "=> renegotiate" \
2014-02-20 16:19:59 +00:00
-s "write hello request"
run_test "Renegotiation #3 (enabled, double)" \
"$P_SRV debug_level=4 renegotiation=1 renegotiate=1" \
"$P_CLI debug_level=4 renegotiation=1 renegotiate=1" \
2014-02-20 16:19:59 +00:00
0 \
-c "client hello, adding renegotiation extension" \
-s "received TLS_EMPTY_RENEGOTIATION_INFO" \
-s "found renegotiation extension" \
-s "server hello, secure renegotiation extension" \
-c "found renegotiation extension" \
2014-02-26 15:35:27 +00:00
-c "=> renegotiate" \
-s "=> renegotiate" \
2014-02-20 16:19:59 +00:00
-s "write hello request"
run_test "Renegotiation #4 (client-initiated, server-rejected)" \
2014-02-25 13:18:30 +00:00
"$P_SRV debug_level=4 renegotiation=0" \
"$P_CLI debug_level=4 renegotiation=1 renegotiate=1" \
2014-02-20 16:19:59 +00:00
1 \
-c "client hello, adding renegotiation extension" \
-s "received TLS_EMPTY_RENEGOTIATION_INFO" \
-S "found renegotiation extension" \
-s "server hello, secure renegotiation extension" \
-c "found renegotiation extension" \
2014-02-26 15:35:27 +00:00
-c "=> renegotiate" \
-S "=> renegotiate" \
2014-02-20 16:19:59 +00:00
-S "write hello request"
run_test "Renegotiation #5 (server-initiated, client-rejected)" \
"$P_SRV debug_level=4 renegotiation=1 renegotiate=1" \
2014-02-25 13:18:30 +00:00
"$P_CLI debug_level=4 renegotiation=0" \
2014-02-20 16:19:59 +00:00
0 \
-C "client hello, adding renegotiation extension" \
-s "received TLS_EMPTY_RENEGOTIATION_INFO" \
-S "found renegotiation extension" \
-s "server hello, secure renegotiation extension" \
-c "found renegotiation extension" \
2014-02-26 15:35:27 +00:00
-C "=> renegotiate" \
-S "=> renegotiate" \
2014-02-20 16:19:59 +00:00
-s "write hello request" \
-s "SSL - An unexpected message was received from our peer" \
-s "failed"
2014-02-21 08:47:37 +00:00
2014-02-21 11:12:23 +00:00
# Tests for auth_mode
run_test "Authentication #1 (server badcert, client required)" \
2014-02-25 13:18:30 +00:00
"$P_SRV crt_file=data_files/server5-badsign.crt \
2014-02-21 11:12:23 +00:00
key_file=data_files/server5.key" \
2014-02-25 13:18:30 +00:00
"$P_CLI debug_level=2 auth_mode=required" \
2014-02-21 11:12:23 +00:00
1 \
-c "x509_verify_cert() returned" \
-c "! self-signed or not signed by a trusted CA" \
-c "! ssl_handshake returned" \
-c "X509 - Certificate verification failed"
run_test "Authentication #2 (server badcert, client optional)" \
2014-02-25 13:18:30 +00:00
"$P_SRV crt_file=data_files/server5-badsign.crt \
2014-02-21 11:12:23 +00:00
key_file=data_files/server5.key" \
2014-02-25 13:18:30 +00:00
"$P_CLI debug_level=2 auth_mode=optional" \
2014-02-21 11:12:23 +00:00
0 \
-c "x509_verify_cert() returned" \
-c "! self-signed or not signed by a trusted CA" \
-C "! ssl_handshake returned" \
-C "X509 - Certificate verification failed"
run_test "Authentication #3 (server badcert, client none)" \
2014-02-25 13:18:30 +00:00
"$P_SRV crt_file=data_files/server5-badsign.crt \
2014-02-21 11:12:23 +00:00
key_file=data_files/server5.key" \
2014-02-25 13:18:30 +00:00
"$P_CLI debug_level=2 auth_mode=none" \
2014-02-21 11:12:23 +00:00
0 \
-C "x509_verify_cert() returned" \
-C "! self-signed or not signed by a trusted CA" \
-C "! ssl_handshake returned" \
-C "X509 - Certificate verification failed"
run_test "Authentication #4 (client badcert, server required)" \
2014-02-25 13:18:30 +00:00
"$P_SRV debug_level=4 auth_mode=required" \
"$P_CLI debug_level=4 crt_file=data_files/server5-badsign.crt \
2014-02-21 11:12:23 +00:00
key_file=data_files/server5.key" \
1 \
-S "skip write certificate request" \
-C "skip parse certificate request" \
-c "got a certificate request" \
-C "skip write certificate" \
-C "skip write certificate verify" \
-S "skip parse certificate verify" \
-s "x509_verify_cert() returned" \
-S "! self-signed or not signed by a trusted CA" \
-s "! ssl_handshake returned" \
-c "! ssl_handshake returned" \
-s "X509 - Certificate verification failed"
run_test "Authentication #5 (client badcert, server optional)" \
2014-02-25 13:18:30 +00:00
"$P_SRV debug_level=4 auth_mode=optional" \
"$P_CLI debug_level=4 crt_file=data_files/server5-badsign.crt \
2014-02-21 11:12:23 +00:00
key_file=data_files/server5.key" \
0 \
-S "skip write certificate request" \
-C "skip parse certificate request" \
-c "got a certificate request" \
-C "skip write certificate" \
-C "skip write certificate verify" \
-S "skip parse certificate verify" \
-s "x509_verify_cert() returned" \
-s "! self-signed or not signed by a trusted CA" \
-S "! ssl_handshake returned" \
-C "! ssl_handshake returned" \
-S "X509 - Certificate verification failed"
run_test "Authentication #6 (client badcert, server none)" \
2014-02-25 13:18:30 +00:00
"$P_SRV debug_level=4 auth_mode=none" \
"$P_CLI debug_level=4 crt_file=data_files/server5-badsign.crt \
2014-02-21 11:12:23 +00:00
key_file=data_files/server5.key" \
0 \
-s "skip write certificate request" \
-C "skip parse certificate request" \
-c "got no certificate request" \
-c "skip write certificate" \
-c "skip write certificate verify" \
-s "skip parse certificate verify" \
-S "x509_verify_cert() returned" \
-S "! self-signed or not signed by a trusted CA" \
-S "! ssl_handshake returned" \
-C "! ssl_handshake returned" \
-S "X509 - Certificate verification failed"
2014-02-27 13:58:26 +00:00
run_test "Authentication #7 (client no cert, server optional)" \
"$P_SRV debug_level=4 auth_mode=optional" \
"$P_CLI debug_level=4 crt_file=none key_file=none" \
0 \
-S "skip write certificate request" \
-C "skip parse certificate request" \
-c "got a certificate request" \
-C "skip write certificate$" \
-C "got no certificate to send" \
-S "SSLv3 client has no certificate" \
-c "skip write certificate verify" \
-s "skip parse certificate verify" \
-s "! no client certificate sent" \
-S "! ssl_handshake returned" \
-C "! ssl_handshake returned" \
-S "X509 - Certificate verification failed"
run_test "Authentication #8 (openssl client no cert, server optional)" \
"$P_SRV debug_level=4 auth_mode=optional" \
"$O_CLI" \
0 \
-S "skip write certificate request" \
-s "skip parse certificate verify" \
-s "! no client certificate sent" \
-S "! ssl_handshake returned" \
-S "X509 - Certificate verification failed"
run_test "Authentication #9 (client no cert, openssl server optional)" \
"$O_SRV -verify 10" \
"$P_CLI debug_level=4 crt_file=none key_file=none" \
0 \
-C "skip parse certificate request" \
-c "got a certificate request" \
-C "skip write certificate$" \
-c "skip write certificate verify" \
-C "! ssl_handshake returned"
run_test "Authentication #10 (client no cert, ssl3)" \
"$P_SRV debug_level=4 auth_mode=optional force_version=ssl3" \
"$P_CLI debug_level=4 crt_file=none key_file=none" \
0 \
-S "skip write certificate request" \
-C "skip parse certificate request" \
-c "got a certificate request" \
-C "skip write certificate$" \
-c "skip write certificate verify" \
-c "got no certificate to send" \
-s "SSLv3 client has no certificate" \
-s "skip parse certificate verify" \
-s "! no client certificate sent" \
-S "! ssl_handshake returned" \
-C "! ssl_handshake returned" \
-S "X509 - Certificate verification failed"
2014-02-25 11:26:29 +00:00
# tests for SNI
run_test "SNI #0 (no SNI callback)" \
2014-02-25 13:18:30 +00:00
"$P_SRV debug_level=4 server_addr=127.0.0.1 \
2014-02-25 11:26:29 +00:00
crt_file=data_files/server5.crt key_file=data_files/server5.key" \
2014-02-25 13:18:30 +00:00
"$P_CLI debug_level=0 server_addr=127.0.0.1 \
2014-02-25 11:26:29 +00:00
server_name=localhost" \
0 \
-S "parse ServerName extension" \
-c "issuer name *: C=NL, O=PolarSSL, CN=Polarssl Test EC CA" \
-c "subject name *: C=NL, O=PolarSSL, CN=localhost"
run_test "SNI #1 (matching cert 1)" \
2014-02-25 13:18:30 +00:00
"$P_SRV debug_level=4 server_addr=127.0.0.1 \
2014-02-25 11:26:29 +00:00
crt_file=data_files/server5.crt key_file=data_files/server5.key \
sni=localhost,data_files/server2.crt,data_files/server2.key,polarssl.example,data_files/server1-nospace.crt,data_files/server1.key" \
2014-02-25 13:18:30 +00:00
"$P_CLI debug_level=0 server_addr=127.0.0.1 \
2014-02-25 11:26:29 +00:00
server_name=localhost" \
0 \
-s "parse ServerName extension" \
-c "issuer name *: C=NL, O=PolarSSL, CN=PolarSSL Test CA" \
-c "subject name *: C=NL, O=PolarSSL, CN=localhost"
run_test "SNI #2 (matching cert 2)" \
2014-02-25 13:18:30 +00:00
"$P_SRV debug_level=4 server_addr=127.0.0.1 \
2014-02-25 11:26:29 +00:00
crt_file=data_files/server5.crt key_file=data_files/server5.key \
sni=localhost,data_files/server2.crt,data_files/server2.key,polarssl.example,data_files/server1-nospace.crt,data_files/server1.key" \
2014-02-25 13:18:30 +00:00
"$P_CLI debug_level=0 server_addr=127.0.0.1 \
server_name=polarssl.example" \
2014-02-25 11:26:29 +00:00
0 \
-s "parse ServerName extension" \
-c "issuer name *: C=NL, O=PolarSSL, CN=PolarSSL Test CA" \
-c "subject name *: C=NL, O=PolarSSL, CN=polarssl.example"
2014-02-25 11:26:29 +00:00
run_test "SNI #3 (no matching cert)" \
2014-02-25 13:18:30 +00:00
"$P_SRV debug_level=4 server_addr=127.0.0.1 \
2014-02-25 11:26:29 +00:00
crt_file=data_files/server5.crt key_file=data_files/server5.key \
sni=localhost,data_files/server2.crt,data_files/server2.key,polarssl.example,data_files/server1-nospace.crt,data_files/server1.key" \
2014-02-25 13:18:30 +00:00
"$P_CLI debug_level=0 server_addr=127.0.0.1 \
server_name=nonesuch.example" \
2014-02-25 11:26:29 +00:00
1 \
-s "parse ServerName extension" \
-s "ssl_sni_wrapper() returned" \
-s "ssl_handshake returned" \
-c "ssl_handshake returned" \
-c "SSL - A fatal alert message was received from our peer"
2014-02-26 13:45:12 +00:00
# Tests for non-blocking I/O: exercise a variety of handshake flows
run_test "Non-blocking I/O #1 (basic handshake)" \
"$P_SRV nbio=2 tickets=0 auth_mode=none" \
"$P_CLI nbio=2 tickets=0" \
0 \
-S "ssl_handshake returned" \
-C "ssl_handshake returned" \
-c "Read from server: .* bytes read"
run_test "Non-blocking I/O #2 (client auth)" \
"$P_SRV nbio=2 tickets=0 auth_mode=required" \
"$P_CLI nbio=2 tickets=0" \
0 \
-S "ssl_handshake returned" \
-C "ssl_handshake returned" \
-c "Read from server: .* bytes read"
run_test "Non-blocking I/O #3 (ticket)" \
"$P_SRV nbio=2 tickets=1 auth_mode=none" \
"$P_CLI nbio=2 tickets=1" \
0 \
-S "ssl_handshake returned" \
-C "ssl_handshake returned" \
-c "Read from server: .* bytes read"
run_test "Non-blocking I/O #4 (ticket + client auth)" \
"$P_SRV nbio=2 tickets=1 auth_mode=required" \
"$P_CLI nbio=2 tickets=1" \
0 \
-S "ssl_handshake returned" \
-C "ssl_handshake returned" \
-c "Read from server: .* bytes read"
run_test "Non-blocking I/O #5 (ticket + client auth + resume)" \
"$P_SRV nbio=2 tickets=1 auth_mode=required" \
"$P_CLI nbio=2 tickets=1 reconnect=1" \
0 \
-S "ssl_handshake returned" \
-C "ssl_handshake returned" \
-c "Read from server: .* bytes read"
run_test "Non-blocking I/O #6 (ticket + resume)" \
"$P_SRV nbio=2 tickets=1 auth_mode=none" \
"$P_CLI nbio=2 tickets=1 reconnect=1" \
0 \
-S "ssl_handshake returned" \
-C "ssl_handshake returned" \
-c "Read from server: .* bytes read"
run_test "Non-blocking I/O #7 (session-id resume)" \
"$P_SRV nbio=2 tickets=0 auth_mode=none" \
"$P_CLI nbio=2 tickets=0 reconnect=1" \
0 \
-S "ssl_handshake returned" \
-C "ssl_handshake returned" \
-c "Read from server: .* bytes read"
# Tests for version negotiation
2014-02-26 15:33:03 +00:00
run_test "Version check #1 (all -> 1.2)" \
"$P_SRV" \
"$P_CLI" \
0 \
-S "ssl_handshake returned" \
-C "ssl_handshake returned" \
-s "Protocol is TLSv1.2" \
-c "Protocol is TLSv1.2"
run_test "Version check #2 (cli max 1.1 -> 1.1)" \
"$P_SRV" \
"$P_CLI max_version=tls1_1" \
0 \
-S "ssl_handshake returned" \
-C "ssl_handshake returned" \
-s "Protocol is TLSv1.1" \
-c "Protocol is TLSv1.1"
run_test "Version check #3 (srv max 1.1 -> 1.1)" \
"$P_SRV max_version=tls1_1" \
"$P_CLI" \
0 \
-S "ssl_handshake returned" \
-C "ssl_handshake returned" \
-s "Protocol is TLSv1.1" \
-c "Protocol is TLSv1.1"
run_test "Version check #4 (cli+srv max 1.1 -> 1.1)" \
"$P_SRV max_version=tls1_1" \
"$P_CLI max_version=tls1_1" \
0 \
-S "ssl_handshake returned" \
-C "ssl_handshake returned" \
-s "Protocol is TLSv1.1" \
-c "Protocol is TLSv1.1"
run_test "Version check #5 (cli max 1.1, srv min 1.1 -> 1.1)" \
"$P_SRV min_version=tls1_1" \
"$P_CLI max_version=tls1_1" \
0 \
-S "ssl_handshake returned" \
-C "ssl_handshake returned" \
-s "Protocol is TLSv1.1" \
-c "Protocol is TLSv1.1"
run_test "Version check #6 (cli min 1.1, srv max 1.1 -> 1.1)" \
"$P_SRV max_version=tls1_1" \
"$P_CLI min_version=tls1_1" \
0 \
-S "ssl_handshake returned" \
-C "ssl_handshake returned" \
-s "Protocol is TLSv1.1" \
-c "Protocol is TLSv1.1"
run_test "Version check #7 (cli min 1.2, srv max 1.1 -> fail)" \
"$P_SRV max_version=tls1_1" \
"$P_CLI min_version=tls1_2" \
1 \
-s "ssl_handshake returned" \
-c "ssl_handshake returned" \
-c "SSL - Handshake protocol not within min/max boundaries"
run_test "Version check #8 (srv min 1.2, cli max 1.1 -> fail)" \
"$P_SRV min_version=tls1_2" \
"$P_CLI max_version=tls1_1" \
1 \
-s "ssl_handshake returned" \
-c "ssl_handshake returned" \
-s "SSL - Handshake protocol not within min/max boundaries"
# Tests for ALPN extension
2014-04-07 11:24:21 +00:00
if grep '^#define POLARSSL_SSL_ALPN' $CONFIG_H >/dev/null; then
run_test "ALPN #0 (none)" \
"$P_SRV debug_level=4" \
"$P_CLI debug_level=4" \
0 \
-C "client hello, adding alpn extension" \
-S "found alpn extension" \
-C "got an alert message, type: \\[2:120]" \
-S "server hello, adding alpn extension" \
-C "found alpn extension " \
-C "Application Layer Protocol is" \
-S "Application Layer Protocol is"
run_test "ALPN #1 (client only)" \
"$P_SRV debug_level=4" \
"$P_CLI debug_level=4 alpn=abc,1234" \
0 \
-c "client hello, adding alpn extension" \
-s "found alpn extension" \
-C "got an alert message, type: \\[2:120]" \
-S "server hello, adding alpn extension" \
-C "found alpn extension " \
-c "Application Layer Protocol is (none)" \
-S "Application Layer Protocol is"
run_test "ALPN #2 (server only)" \
"$P_SRV debug_level=4 alpn=abc,1234" \
"$P_CLI debug_level=4" \
0 \
-C "client hello, adding alpn extension" \
-S "found alpn extension" \
-C "got an alert message, type: \\[2:120]" \
-S "server hello, adding alpn extension" \
-C "found alpn extension " \
-C "Application Layer Protocol is" \
-s "Application Layer Protocol is (none)"
run_test "ALPN #3 (both, common cli1-srv1)" \
"$P_SRV debug_level=4 alpn=abc,1234" \
"$P_CLI debug_level=4 alpn=abc,1234" \
0 \
-c "client hello, adding alpn extension" \
-s "found alpn extension" \
-C "got an alert message, type: \\[2:120]" \
-s "server hello, adding alpn extension" \
-c "found alpn extension" \
-c "Application Layer Protocol is abc" \
-s "Application Layer Protocol is abc"
run_test "ALPN #4 (both, common cli2-srv1)" \
"$P_SRV debug_level=4 alpn=abc,1234" \
"$P_CLI debug_level=4 alpn=1234,abc" \
0 \
-c "client hello, adding alpn extension" \
-s "found alpn extension" \
-C "got an alert message, type: \\[2:120]" \
-s "server hello, adding alpn extension" \
-c "found alpn extension" \
-c "Application Layer Protocol is abc" \
-s "Application Layer Protocol is abc"
run_test "ALPN #5 (both, common cli1-srv2)" \
"$P_SRV debug_level=4 alpn=abc,1234" \
"$P_CLI debug_level=4 alpn=1234,abcde" \
0 \
-c "client hello, adding alpn extension" \
-s "found alpn extension" \
-C "got an alert message, type: \\[2:120]" \
-s "server hello, adding alpn extension" \
-c "found alpn extension" \
-c "Application Layer Protocol is 1234" \
-s "Application Layer Protocol is 1234"
run_test "ALPN #6 (both, no common)" \
"$P_SRV debug_level=4 alpn=abc,123" \
"$P_CLI debug_level=4 alpn=1234,abcde" \
1 \
-c "client hello, adding alpn extension" \
-s "found alpn extension" \
-c "got an alert message, type: \\[2:120]" \
-S "server hello, adding alpn extension" \
-C "found alpn extension" \
-C "Application Layer Protocol is 1234" \
-S "Application Layer Protocol is 1234"
2014-04-07 11:24:21 +00:00
fi
# Tests for keyUsage in leaf certificates, part 1:
# server-side certificate/suite selection
run_test "keyUsage srv #1 (RSA, digitalSignature -> (EC)DHE-RSA)" \
"$P_SRV key_file=data_files/server2.key \
crt_file=data_files/server2.ku-ds.crt" \
"$P_CLI" \
0 \
-c "Ciphersuite is TLS-[EC]*DHE-RSA-WITH-"
run_test "keyUsage srv #2 (RSA, keyEncipherment -> RSA)" \
"$P_SRV key_file=data_files/server2.key \
crt_file=data_files/server2.ku-ke.crt" \
"$P_CLI" \
0 \
-c "Ciphersuite is TLS-RSA-WITH-"
# add psk to leave an option for client to send SERVERQUIT
run_test "keyUsage srv #3 (RSA, keyAgreement -> fail)" \
"$P_SRV psk=abc123 key_file=data_files/server2.key \
crt_file=data_files/server2.ku-ka.crt" \
"$P_CLI psk=badbad" \
1 \
-C "Ciphersuite is "
run_test "keyUsage srv #4 (ECDSA, digitalSignature -> ECDHE-ECDSA)" \
"$P_SRV key_file=data_files/server5.key \
crt_file=data_files/server5.ku-ds.crt" \
"$P_CLI" \
0 \
-c "Ciphersuite is TLS-ECDHE-ECDSA-WITH-"
run_test "keyUsage srv #5 (ECDSA, keyAgreement -> ECDH-)" \
"$P_SRV key_file=data_files/server5.key \
crt_file=data_files/server5.ku-ka.crt" \
"$P_CLI" \
0 \
-c "Ciphersuite is TLS-ECDH-"
# add psk to leave an option for client to send SERVERQUIT
run_test "keyUsage srv #6 (ECDSA, keyEncipherment -> fail)" \
"$P_SRV psk=abc123 key_file=data_files/server5.key \
crt_file=data_files/server5.ku-ke.crt" \
"$P_CLI psk=badbad" \
1 \
-C "Ciphersuite is "
# Tests for keyUsage in leaf certificates, part 2:
# client-side checking of server cert
run_test "keyUsage cli #1 (DigitalSignature+KeyEncipherment, RSA: OK)" \
"$O_SRV -key data_files/server2.key \
-cert data_files/server2.ku-ds_ke.crt" \
"$P_CLI debug_level=2 \
force_ciphersuite=TLS-RSA-WITH-AES-128-CBC-SHA" \
0 \
-C "bad certificate (usage extensions)" \
-C "Processing of the Certificate handshake message failed" \
-c "Ciphersuite is TLS-"
run_test "keyUsage cli #2 (DigitalSignature+KeyEncipherment, DHE-RSA: OK)" \
"$O_SRV -key data_files/server2.key \
-cert data_files/server2.ku-ds_ke.crt" \
"$P_CLI debug_level=2 \
force_ciphersuite=TLS-DHE-RSA-WITH-AES-128-CBC-SHA" \
0 \
-C "bad certificate (usage extensions)" \
-C "Processing of the Certificate handshake message failed" \
-c "Ciphersuite is TLS-"
run_test "keyUsage cli #3 (KeyEncipherment, RSA: OK)" \
"$O_SRV -key data_files/server2.key \
-cert data_files/server2.ku-ke.crt" \
"$P_CLI debug_level=2 \
force_ciphersuite=TLS-RSA-WITH-AES-128-CBC-SHA" \
0 \
-C "bad certificate (usage extensions)" \
-C "Processing of the Certificate handshake message failed" \
-c "Ciphersuite is TLS-"
run_test "keyUsage cli #4 (KeyEncipherment, DHE-RSA: fail)" \
"$O_SRV -key data_files/server2.key \
-cert data_files/server2.ku-ke.crt" \
"$P_CLI debug_level=2 \
force_ciphersuite=TLS-DHE-RSA-WITH-AES-128-CBC-SHA" \
1 \
-c "bad certificate (usage extensions)" \
-c "Processing of the Certificate handshake message failed" \
-C "Ciphersuite is TLS-"
run_test "keyUsage cli #5 (DigitalSignature, DHE-RSA: OK)" \
"$O_SRV -key data_files/server2.key \
-cert data_files/server2.ku-ds.crt" \
"$P_CLI debug_level=2 \
force_ciphersuite=TLS-DHE-RSA-WITH-AES-128-CBC-SHA" \
0 \
-C "bad certificate (usage extensions)" \
-C "Processing of the Certificate handshake message failed" \
-c "Ciphersuite is TLS-"
run_test "keyUsage cli #5 (DigitalSignature, RSA: fail)" \
"$O_SRV -key data_files/server2.key \
-cert data_files/server2.ku-ds.crt" \
"$P_CLI debug_level=2 \
force_ciphersuite=TLS-RSA-WITH-AES-128-CBC-SHA" \
1 \
-c "bad certificate (usage extensions)" \
-c "Processing of the Certificate handshake message failed" \
-C "Ciphersuite is TLS-"
# Tests for keyUsage in leaf certificates, part 3:
# server-side checking of client cert
run_test "keyUsage cli-auth #1 (RSA, DigitalSignature: OK)" \
"$P_SRV debug_level=2 auth_mode=optional" \
"$O_CLI -key data_files/server2.key \
-cert data_files/server2.ku-ds.crt" \
0 \
-S "bad certificate (usage extensions)" \
-S "Processing of the Certificate handshake message failed"
run_test "keyUsage cli-auth #2 (RSA, KeyEncipherment: fail (soft))" \
"$P_SRV debug_level=2 auth_mode=optional" \
"$O_CLI -key data_files/server2.key \
-cert data_files/server2.ku-ke.crt" \
0 \
-s "bad certificate (usage extensions)" \
-S "Processing of the Certificate handshake message failed"
run_test "keyUsage cli-auth #3 (RSA, KeyEncipherment: fail (hard))" \
"$P_SRV debug_level=2 auth_mode=required" \
"$O_CLI -key data_files/server2.key \
-cert data_files/server2.ku-ke.crt" \
1 \
-s "bad certificate (usage extensions)" \
-s "Processing of the Certificate handshake message failed"
run_test "keyUsage cli-auth #4 (ECDSA, DigitalSignature: OK)" \
"$P_SRV debug_level=2 auth_mode=optional" \
"$O_CLI -key data_files/server5.key \
-cert data_files/server5.ku-ds.crt" \
0 \
-S "bad certificate (usage extensions)" \
-S "Processing of the Certificate handshake message failed"
run_test "keyUsage cli-auth #5 (ECDSA, KeyAgreement: fail (soft))" \
"$P_SRV debug_level=2 auth_mode=optional" \
"$O_CLI -key data_files/server5.key \
-cert data_files/server5.ku-ka.crt" \
0 \
-s "bad certificate (usage extensions)" \
-S "Processing of the Certificate handshake message failed"
# Tests for extendedKeyUsage, part 1: server-side certificate/suite selection
run_test "extKeyUsage srv #1 (serverAuth -> OK)" \
"$P_SRV key_file=data_files/server5.key \
crt_file=data_files/server5.eku-srv.crt" \
"$P_CLI" \
0
run_test "extKeyUsage srv #2 (serverAuth,clientAuth -> OK)" \
"$P_SRV key_file=data_files/server5.key \
crt_file=data_files/server5.eku-srv.crt" \
"$P_CLI" \
0
run_test "extKeyUsage srv #3 (codeSign,anyEKU -> OK)" \
"$P_SRV key_file=data_files/server5.key \
crt_file=data_files/server5.eku-cs_any.crt" \
"$P_CLI" \
0
# add psk to leave an option for client to send SERVERQUIT
run_test "extKeyUsage srv #4 (codeSign -> fail)" \
"$P_SRV psk=abc123 key_file=data_files/server5.key \
crt_file=data_files/server5.eku-cli.crt" \
"$P_CLI psk=badbad" \
1
# Tests for extendedKeyUsage, part 2: client-side checking of server cert
run_test "extKeyUsage cli #1 (serverAuth -> OK)" \
"$O_SRV -key data_files/server5.key \
-cert data_files/server5.eku-srv.crt" \
"$P_CLI debug_level=2" \
0 \
-C "bad certificate (usage extensions)" \
-C "Processing of the Certificate handshake message failed" \
-c "Ciphersuite is TLS-"
run_test "extKeyUsage cli #2 (serverAuth,clientAuth -> OK)" \
"$O_SRV -key data_files/server5.key \
-cert data_files/server5.eku-srv_cli.crt" \
"$P_CLI debug_level=2" \
0 \
-C "bad certificate (usage extensions)" \
-C "Processing of the Certificate handshake message failed" \
-c "Ciphersuite is TLS-"
run_test "extKeyUsage cli #3 (codeSign,anyEKU -> OK)" \
"$O_SRV -key data_files/server5.key \
-cert data_files/server5.eku-cs_any.crt" \
"$P_CLI debug_level=2" \
0 \
-C "bad certificate (usage extensions)" \
-C "Processing of the Certificate handshake message failed" \
-c "Ciphersuite is TLS-"
run_test "extKeyUsage cli #4 (codeSign -> fail)" \
"$O_SRV -key data_files/server5.key \
-cert data_files/server5.eku-cs.crt" \
"$P_CLI debug_level=2" \
1 \
-c "bad certificate (usage extensions)" \
-c "Processing of the Certificate handshake message failed" \
-C "Ciphersuite is TLS-"
# Tests for extendedKeyUsage, part 3: server-side checking of client cert
run_test "extKeyUsage cli-auth #1 (clientAuth -> OK)" \
"$P_SRV debug_level=2 auth_mode=optional" \
"$O_CLI -key data_files/server5.key \
-cert data_files/server5.eku-cli.crt" \
0 \
-S "bad certificate (usage extensions)" \
-S "Processing of the Certificate handshake message failed"
run_test "extKeyUsage cli-auth #2 (serverAuth,clientAuth -> OK)" \
"$P_SRV debug_level=2 auth_mode=optional" \
"$O_CLI -key data_files/server5.key \
-cert data_files/server5.eku-srv_cli.crt" \
0 \
-S "bad certificate (usage extensions)" \
-S "Processing of the Certificate handshake message failed"
run_test "extKeyUsage cli-auth #3 (codeSign,anyEKU -> OK)" \
"$P_SRV debug_level=2 auth_mode=optional" \
"$O_CLI -key data_files/server5.key \
-cert data_files/server5.eku-cs_any.crt" \
0 \
-S "bad certificate (usage extensions)" \
-S "Processing of the Certificate handshake message failed"
run_test "extKeyUsage cli-auth #4 (codeSign -> fail (soft))" \
"$P_SRV debug_level=2 auth_mode=optional" \
"$O_CLI -key data_files/server5.key \
-cert data_files/server5.eku-cs.crt" \
0 \
-s "bad certificate (usage extensions)" \
-S "Processing of the Certificate handshake message failed"
run_test "extKeyUsage cli-auth #4b (codeSign -> fail (hard))" \
"$P_SRV debug_level=2 auth_mode=required" \
"$O_CLI -key data_files/server5.key \
-cert data_files/server5.eku-cs.crt" \
1 \
-s "bad certificate (usage extensions)" \
-s "Processing of the Certificate handshake message failed"
2014-06-09 09:36:47 +00:00
# Tests for DHM parameters loading
run_test "DHM parameters #0 (reference)" \
"$P_SRV" \
"$P_CLI force_ciphersuite=TLS-DHE-RSA-WITH-AES-128-CBC-SHA \
debug_level=3" \
0 \
-c "value of 'DHM: P ' (2048 bits)" \
-c "value of 'DHM: G ' (2048 bits)"
run_test "DHM parameters #1 (other parameters)" \
"$P_SRV dhm_file=data_files/dhparams.pem" \
"$P_CLI force_ciphersuite=TLS-DHE-RSA-WITH-AES-128-CBC-SHA \
debug_level=3" \
0 \
-c "value of 'DHM: P ' (1024 bits)" \
-c "value of 'DHM: G ' (2 bits)"
2014-06-10 13:00:46 +00:00
# Tests for PSK callback
2014-06-10 13:28:52 +00:00
run_test "PSK callback #0a (psk, no callback)" \
2014-06-10 13:00:46 +00:00
"$P_SRV psk=abc123 psk_identity=foo" \
"$P_CLI force_ciphersuite=TLS-PSK-WITH-AES-128-CBC-SHA \
psk_identity=foo psk=abc123" \
0 \
2014-06-10 13:28:52 +00:00
-S "SSL - The server has no ciphersuites in common" \
-S "SSL - Unknown identity received" \
-S "SSL - Verification of the message MAC failed"
run_test "PSK callback #0b (no psk, no callback)" \
"$P_SRV" \
"$P_CLI force_ciphersuite=TLS-PSK-WITH-AES-128-CBC-SHA \
psk_identity=foo psk=abc123" \
1 \
-s "SSL - The server has no ciphersuites in common" \
2014-06-10 13:00:46 +00:00
-S "SSL - Unknown identity received" \
-S "SSL - Verification of the message MAC failed"
run_test "PSK callback #1 (callback overrides other settings)" \
"$P_SRV psk=abc123 psk_identity=foo psk_list=abc,dead,def,beef" \
"$P_CLI force_ciphersuite=TLS-PSK-WITH-AES-128-CBC-SHA \
psk_identity=foo psk=abc123" \
1 \
2014-06-10 13:28:52 +00:00
-S "SSL - The server has no ciphersuites in common" \
2014-06-10 13:00:46 +00:00
-s "SSL - Unknown identity received" \
-S "SSL - Verification of the message MAC failed"
run_test "PSK callback #2 (first id matches)" \
"$P_SRV psk_list=abc,dead,def,beef" \
"$P_CLI force_ciphersuite=TLS-PSK-WITH-AES-128-CBC-SHA \
psk_identity=abc psk=dead" \
0 \
2014-06-10 13:28:52 +00:00
-S "SSL - The server has no ciphersuites in common" \
2014-06-10 13:00:46 +00:00
-S "SSL - Unknown identity received" \
-S "SSL - Verification of the message MAC failed"
run_test "PSK callback #3 (second id matches)" \
"$P_SRV psk_list=abc,dead,def,beef" \
"$P_CLI force_ciphersuite=TLS-PSK-WITH-AES-128-CBC-SHA \
psk_identity=def psk=beef" \
0 \
2014-06-10 13:28:52 +00:00
-S "SSL - The server has no ciphersuites in common" \
2014-06-10 13:00:46 +00:00
-S "SSL - Unknown identity received" \
-S "SSL - Verification of the message MAC failed"
run_test "PSK callback #4 (no match)" \
"$P_SRV psk_list=abc,dead,def,beef" \
"$P_CLI force_ciphersuite=TLS-PSK-WITH-AES-128-CBC-SHA \
psk_identity=ghi psk=beef" \
1 \
2014-06-10 13:28:52 +00:00
-S "SSL - The server has no ciphersuites in common" \
2014-06-10 13:00:46 +00:00
-s "SSL - Unknown identity received" \
-S "SSL - Verification of the message MAC failed"
run_test "PSK callback #5 (wrong key)" \
"$P_SRV psk_list=abc,dead,def,beef" \
"$P_CLI force_ciphersuite=TLS-PSK-WITH-AES-128-CBC-SHA \
psk_identity=abc psk=beef" \
1 \
2014-06-10 13:28:52 +00:00
-S "SSL - The server has no ciphersuites in common" \
2014-06-10 13:00:46 +00:00
-S "SSL - Unknown identity received" \
-s "SSL - Verification of the message MAC failed"
2014-06-09 09:36:47 +00:00
# Tests for ciphersuites per version
run_test "Per-version suites #1" \
"$P_SRV version_suites=TLS-RSA-WITH-3DES-EDE-CBC-SHA,TLS-RSA-WITH-RC4-128-SHA,TLS-RSA-WITH-AES-128-CBC-SHA,TLS-RSA-WITH-AES-128-GCM-SHA256" \
"$P_CLI force_version=ssl3" \
0 \
-c "Ciphersuite is TLS-RSA-WITH-3DES-EDE-CBC-SHA"
run_test "Per-version suites #2" \
"$P_SRV version_suites=TLS-RSA-WITH-3DES-EDE-CBC-SHA,TLS-RSA-WITH-RC4-128-SHA,TLS-RSA-WITH-AES-128-CBC-SHA,TLS-RSA-WITH-AES-128-GCM-SHA256" \
"$P_CLI force_version=tls1" \
0 \
-c "Ciphersuite is TLS-RSA-WITH-RC4-128-SHA"
run_test "Per-version suites #3" \
"$P_SRV version_suites=TLS-RSA-WITH-3DES-EDE-CBC-SHA,TLS-RSA-WITH-RC4-128-SHA,TLS-RSA-WITH-AES-128-CBC-SHA,TLS-RSA-WITH-AES-128-GCM-SHA256" \
"$P_CLI force_version=tls1_1" \
0 \
-c "Ciphersuite is TLS-RSA-WITH-AES-128-CBC-SHA"
run_test "Per-version suites #4" \
"$P_SRV version_suites=TLS-RSA-WITH-3DES-EDE-CBC-SHA,TLS-RSA-WITH-RC4-128-SHA,TLS-RSA-WITH-AES-128-CBC-SHA,TLS-RSA-WITH-AES-128-GCM-SHA256" \
"$P_CLI force_version=tls1_2" \
0 \
-c "Ciphersuite is TLS-RSA-WITH-AES-128-GCM-SHA256"
2014-06-11 16:32:36 +00:00
# Tests for ssl_get_bytes_avail()
run_test "ssl_get_bytes_avail #1 (no extra data)" \
"$P_SRV" \
"$P_CLI request_size=100" \
0 \
-s "Read from client: 100 bytes read$"
run_test "ssl_get_bytes_avail #2 (extra data)" \
"$P_SRV" \
"$P_CLI request_size=500" \
0 \
-s "Read from client: 500 bytes read (.*+.*)"
2014-02-21 11:12:23 +00:00
# Final report
2014-02-21 08:47:37 +00:00
echo "------------------------------------------------------------------------"
if [ $FAILS = 0 ]; then
echo -n "PASSED"
else
echo -n "FAILED"
fi
PASSES=`echo $TESTS - $FAILS | bc`
2014-02-24 12:20:14 +00:00
echo " ($PASSES / $TESTS tests)"
2014-02-21 08:47:37 +00:00
exit $FAILS