AuroraMiddleware/mbedtls
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

Removing yt ls step in READMEs of examples

Browse Source
This commit is contained in:
Brian Daniels 2015-08-18 10:52:57 -07:00
parent bd6d0aba25
commit 3c405aefc5
5 changed files with 24 additions and 64 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

18
yotta/data/example-authcrypt/README.md
View File

@ -28,27 +28,19 @@ To build and run this example the requirements below are necessary:
yotta target frdm-k64f-gcc
```
4. Check that there are no missing dependencies:
```
$ yt ls
```
If there are, yotta will list them in the terminal. Please install them before proceeding.
5. Build mbedtls and the examples. This will take a long time if it is the first time:
4. Build mbedtls and the examples. This will take a long time if it is the first time:
```
$ yt build
```
6. Copy `build/frdm-k64f-gcc/test/mbedtls-test-example-authcrypt.bin` to your mbed board and wait until the LED next to the USB port stops blinking.
5. Copy `build/frdm-k64f-gcc/test/mbedtls-test-example-authcrypt.bin` to your mbed board and wait until the LED next to the USB port stops blinking.
7. Start the serial terminal emulator and connect to the virtual serial port presented by FRDM-K64F. For settings, use 115200 baud, 8N1, no flow control. **Warning:** for this example, the baud rate is not the default 9600, it is 115200.
6. Start the serial terminal emulator and connect to the virtual serial port presented by FRDM-K64F. For settings, use 115200 baud, 8N1, no flow control. **Warning:** for this example, the baud rate is not the default 9600, it is 115200.
8. Press the reset button on the board.
7. Press the reset button on the board.
9. The output in the terminal window should look like:
8. The output in the terminal window should look like:
```
{{timeout;10}}

18
yotta/data/example-benchmark/README.md
View File

@ -28,27 +28,19 @@ To build and run this example the requirements below are necessary:
yotta target frdm-k64f-gcc
```
4. Check that there are no missing dependencies:
```
$ yt ls
```
If there are, yotta will list them in the terminal. Please install them before proceeding.
5. Build mbedtls and the examples. This will take a long time if it is the first time:
4. Build mbedtls and the examples. This will take a long time if it is the first time:
```
$ yt build
```
6. Copy `build/frdm-k64f-gcc/test/mbedtls-test-example-benchmark.bin` to your mbed board and wait until the LED next to the USB port stops blinking.
5. Copy `build/frdm-k64f-gcc/test/mbedtls-test-example-benchmark.bin` to your mbed board and wait until the LED next to the USB port stops blinking.
7. Start the serial terminal emulator and connect to the virtual serial port presented by FRDM-K64F. For settings, use 115200 baud, 8N1, no flow control. **Warning:** for this example, the baud rate is not the default 9600, it is 115200.
6. Start the serial terminal emulator and connect to the virtual serial port presented by FRDM-K64F. For settings, use 115200 baud, 8N1, no flow control. **Warning:** for this example, the baud rate is not the default 9600, it is 115200.
8. Press the reset button on the board.
7. Press the reset button on the board.
9. The output in the terminal window should look like:
8. The output in the terminal window should look like:
```
{{timeout;150}}

18
yotta/data/example-hashing/README.md
View File

@ -28,27 +28,19 @@ To build and run this example the requirements below are necessary:
yotta target frdm-k64f-gcc
```
4. Check that there are no missing dependencies:
```
$ yt ls
```
If there are, yotta will list them in the terminal. Please install them before proceeding.
5. Build mbedtls and the examples. This will take a long time if it is the first time:
4. Build mbedtls and the examples. This will take a long time if it is the first time:
```
$ yt build
```
6. Copy `build/frdm-k64f-gcc/test/mbedtls-test-example-hashing.bin` to your mbed board and wait until the LED next to the USB port stops blinking.
5. Copy `build/frdm-k64f-gcc/test/mbedtls-test-example-hashing.bin` to your mbed board and wait until the LED next to the USB port stops blinking.
7. Start the serial terminal emulator and connect to the virtual serial port presented by FRDM-K64F. For settings, use 115200 baud, 8N1, no flow control. **Warning:** for this example, the baud rate is not the default 9600, it is 115200.
6. Start the serial terminal emulator and connect to the virtual serial port presented by FRDM-K64F. For settings, use 115200 baud, 8N1, no flow control. **Warning:** for this example, the baud rate is not the default 9600, it is 115200.
8. Press the reset button on the board.
7. Press the reset button on the board.
9. The output in the terminal window should look like:
8. The output in the terminal window should look like:
```
{{timeout;10}}

18
yotta/data/example-selftest/README.md
View File

@ -28,27 +28,19 @@ To build and run this example the requirements below are necessary:
yotta target frdm-k64f-gcc
```
4. Check that there are no missing dependencies:
```
$ yt ls
```
If there are, yotta will list them in the terminal. Please install them before proceeding.
5. Build mbedtls and the examples. This will take a long time if it is the first time:
4. Build mbedtls and the examples. This will take a long time if it is the first time:
```
$ yt build
```
6. Copy `build/frdm-k64f-gcc/test/mbedtls-test-example-selftest.bin` to your mbed board and wait until the LED next to the USB port stops blinking.
5. Copy `build/frdm-k64f-gcc/test/mbedtls-test-example-selftest.bin` to your mbed board and wait until the LED next to the USB port stops blinking.
7. Start the serial terminal emulator and connect to the virtual serial port presented by FRDM-K64F. For settings, use 115200 baud, 8N1, no flow control. **Warning:** for this example, the baud rate is not the default 9600, it is 115200.
6. Start the serial terminal emulator and connect to the virtual serial port presented by FRDM-K64F. For settings, use 115200 baud, 8N1, no flow control. **Warning:** for this example, the baud rate is not the default 9600, it is 115200.
8. Press the reset button on the board.
7. Press the reset button on the board.
9. The output in the terminal window should look like:
8. The output in the terminal window should look like:
```
{{timeout;40}}

16
yotta/data/example-tls-client/README.md
View File

@ -34,27 +34,19 @@ To build and run this example the requirements below are necessary:
yotta target frdm-k64f-gcc
```
5. Check that there are no missing dependencies:
```
$ yt ls
```
If there are, yotta will list them in the terminal. Please install them before proceeding.
5. Build mbedtls and the examples. This will take a long time if it is the first time:
```
$ yt build
```
7. Copy `build/frdm-k64f-gcc/test/mbedtls-test-example-tls-client.bin` to your mbed board and wait until the LED next to the USB port stops blinking.
6. Copy `build/frdm-k64f-gcc/test/mbedtls-test-example-tls-client.bin` to your mbed board and wait until the LED next to the USB port stops blinking.
8. Start the serial terminal emulator and connect to the virtual serial port presented by FRDM-K64F. For settings, use 115200 baud, 8N1, no flow control. **Warning:** for this example, the baud rate is not the default 9600, it is 115200.
7. Start the serial terminal emulator and connect to the virtual serial port presented by FRDM-K64F. For settings, use 115200 baud, 8N1, no flow control. **Warning:** for this example, the baud rate is not the default 9600, it is 115200.
9. Press the reset button on the board.
8. Press the reset button on the board.
10. The output in the terminal window should look like:
9. The output in the terminal window should look like:
```
{timeout;120}}