Pass the "certificate policies" extension to the callback supplied to
mbedtls_x509_crt_parse_der_with_ext_cb() if it contains unsupported
policies. This allows the callback to fully replicate the behaviour
of the deprecated MBEDTLS_X509_ALLOW_UNSUPPORTED_CRITICAL_EXTENSION
configuration.
Signed-off-by: Nicola Di Lieto <nicola.dilieto@gmail.com>
These fields might be shifted accordingly in `ssl_parse_record_header()`
when receiving a connection with CID, so they require a manual update
after calling the generic `mbedtls_ssl_reset_in_out_pointers()`.
This commit also adds a regression test which is run by all.sh.
Signed-off-by: Andrzej Kurek <andrzej.kurek@arm.com>
Also normalize the first line of the copyright headers.
This commit was generated using the following script:
# ========================
#!/bin/sh
# Find scripts
find -path './.git' -prune -o '(' -name '*.c' -o -name '*.cpp' -o -name '*.fmt' -o -name '*.h' ')' -print | xargs sed -i '
# Normalize the first line of the copyright headers (no text on the first line of a block comment)
/^\/\*.*Copyright.*Arm/I {
i\
/*
s/^\// /
}
/Copyright.*Arm/I {
# Print copyright declaration
p
# Read the two lines immediately following the copyright declaration
N
N
# Insert Apache header if it is missing
/SPDX/! i\
* SPDX-License-Identifier: Apache-2.0\
*\
* Licensed under the Apache License, Version 2.0 (the "License"); you may\
* not use this file except in compliance with the License.\
* You may obtain a copy of the License at\
*\
* http://www.apache.org/licenses/LICENSE-2.0\
*\
* Unless required by applicable law or agreed to in writing, software\
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT\
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.\
* See the License for the specific language governing permissions and\
* limitations under the License.
# Clear copyright declaration from buffer
D
}
'
# ========================
Signed-off-by: Bence Szépkúti <bence.szepkuti@arm.com>
Another coverity bug - #350039
When this test discovers a key of the wrong type, it still throws it
through the export function in order to check that it too will detect
this as a not permitted action. For the buffer and buffer length
arguments it passes in a local pointer (which will most likely be NULL),
and the sizeof that pointer, as it knows that they will never be used.
Coverity rightly (imho) flagged this as suspicious - if we are going to
pass in incorrect parameters, at least make them obviously incorrect, and
ones that will not potentially cause errors if the code later changes.
There is, for example safety checks for zero length buffer, but less
protection for an insufficiently sized one.
Signed-off-by: Paul Elliott <paul.elliott@arm.com>
This commit was generated using the following script:
# ========================
#!/bin/sh
# Find scripts
find -path './.git' -prune -o '(' -name '*.gdb' -o -name '*.pl' -o -name '*.py' -o -name '*.sh' ')' -print | xargs sed -i '
# Remove Mbed TLS declaration if it occurs before the copyright line
1,/Copyright.*Arm/I {
/This file is part of/,$ {
/Copyright.*Arm/I! d
}
}
# Convert non-standard header in scripts/abi_check.py to the format used in the other scripts
/"""/,/"""/ {
# Cut copyright declaration
/Copyright.*Arm/I {
h
N
d
}
# Paste copyright declaration
/"""/ {
x
/./ {
s/^/# / # Add #
x # Replace orignal buffer with Copyright declaration
p # Print original buffer, insert newline
i\
s/.*// # Clear original buffer
}
x
}
}
/Copyright.*Arm/I {
# Print copyright declaration
p
# Read the two lines immediately following the copyright declaration
N
N
# Insert Apache header if it is missing
/SPDX/! {
i\
# SPDX-License-Identifier: Apache-2.0\
#\
# Licensed under the Apache License, Version 2.0 (the "License"); you may\
# not use this file except in compliance with the License.\
# You may obtain a copy of the License at\
#\
# http://www.apache.org/licenses/LICENSE-2.0\
#\
# Unless required by applicable law or agreed to in writing, software\
# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT\
# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.\
# See the License for the specific language governing permissions and\
# limitations under the License.
# Insert Mbed TLS declaration if it is missing
/This file is part of/! i\
#\
# This file is part of Mbed TLS (https://tls.mbed.org)
}
# Clear copyright declaration from buffer
D
}
'
# ========================
Signed-off-by: Bence Szépkúti <bence.szepkuti@arm.com>
1. When `ssl_server2` export key functionality fails,
don't exit the server, but reset it, to have the
server recover for next connection.
2. Add text filters for `export keys functionality` test in ssl-opt.sh
to check for additional output, to verify if the export suceeded.
This was discovered in the `ssl-opt.sh` script, where the server exited,
before the test tried to kill the server priocess, resulting in a
`kill: No such process` message.
Fixes#2662
Signed-off-by: Ron Eldor <Ron.Eldor@arm.com>
Command to find the files in which lines have gone
larger than 79 characters due to the renaming:
grep '.\{80\}' \
`git diff-tree --no-commit-id --name-only -r HEAD` \
| grep "\<mbedtls_test_rnd_"
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Command to find the files in which lines have gone
larger than 79 characters due to the renaming:
grep '.\{80\}' \
`git diff-tree --no-commit-id --name-only -r HEAD` \
| grep hexcmp
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Command to find the files in which lines have gone
larger than 79 characters due to the renaming:
grep '.\{80\}' \
`git diff-tree --no-commit-id --name-only -r HEAD` \
| grep unhexify_alloc
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Command to find the files in which lines have gone
larger than 79 characters due to the renaming:
grep '.\{80\}' \
`git diff-tree --no-commit-id --name-only -r HEAD` \
| grep hexify
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
The purpose of random.c file is to contain the helper
functions to generate random numbers that have been
in helpers.function so far.
The purpose of random.h is to contain the interface
exposed by random.c thus helper function prototypes.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
The purpose of helpers.c file is to contain the helper
functions that have been in helpers.function so far and
that are not related to the mechanism of unit test
execution and not related to random number generation
(will be moved in a dedicated file).
The purpose of helpers.h is to contain the interface
exposed by helpers.c thus helper function prototypes.
Make the changes in the build systems (make and cmake)
to build helpers.c and link it to test executables
along with mbedtls library.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Fix for coverity bugs 349041, 349052
Allocated pointers could potentially be leaked in the case of errors.
Signed-off-by: Paul Elliott <paul.elliott@arm.com>
Strict platforms cannot be expected to accept C99 code as valid
when earlier standards versions are selected.
This helps the programs build on Solaris-like platforms (e.g.
illumos).
Fixes#3420
Signed-off-by: nia <nia@netbsd.org>
Just adding an empty file. The purpose of this header
file is to contain the definition of generic macros
used for the purpose of testing.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
In preparation of moving the content of helpers.function
to its own compilation unit, remove/add static qualifiers
where appropriate.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Create an include folder dedicated to include files for
tests. With the upcoming work on tests for PSA crypto
drivers the number of includes specific to tests is going
to increase significantly thus create a dedicated folder.
Don't put the include files in the include folder but in
include/test folder. This way test headers can be included
using a test/* path pattern as mbedtls and psa headers
are included using an mbedtls/* and psa/* path pattern.
This makes explicit the scope of the test headers.
Move the existing includes for tests into include/test and
update the code and build systems (make and cmake)
accordingly.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Add the min/max version negotiation tests from ssl-opt.sh as unit
tests for the sake of utility and easier running of tests during
development
Signed-off-by: Paul Elliott <paul.elliott@arm.com>
Instead, we insert a comment containing GDB_BREAK_HERE in the line we
want to break at, and let the gdb script search for it.
Signed-off-by: Bence Szépkúti <bence.szepkuti@arm.com>
This is a convenience for when we get log files from failed CI runs, or attach
them to bug reports, etc.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
A lot of DTLS test are timing-sensitive, especially those that contain
assertions about retransmission. Sometimes some DTLS test fails intermittently
on the CI with no clear apparent reason; we need more information in the log
to understand the cause of those failures.
Adding a proxy means we'll get timing information from the proxy logs.
An alternative would be to add timing information to the debug output of
ssl_server2 and ssl_client2. But that's more complex because getting
sub-second timing info is outside the scope of the C standard, and our current
timing module only provides a APi for sub-second intervals, not absolute time.
Using the proxy is easier as it's a single point that sees all messages, so
elapsed time is fine here, and it's already implemented in the proxy output.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
While pure sh doesn't have a concept of local variables, we can partially
emulate them by unsetting variables before we exit the function, and use the
convention of giving them lowercase names to distinguish from global
variables.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
Since dd prints everything on stderr, both normal status update and actual
errors when they occur, redirecting that to /dev/null is a trade-off that's
acceptable in quiet mode (typically used on a developer's machine and the
developer will re-run in non-quiet mode if anything fails without sufficient
detail in the output), but not that much in non-quiet mode.
For example, if our dd invocation fails because the disk in full on a CI
machine, we want the error to be reported at the time we invoke dd, and not
later when a seemingly unrelated test fails due to an incorrect seedfile.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
Currently we draw pseudo-random numbers at the beginning and end of the main
loop. With ECP_RESTARTABLE, it's possible that between those two occasions we
returned from the multiplication function, hence lost our internal DRBG
context that lives in this function's stack frame. This would result in the
same pseudo-random numbers being used for blinding in multiple places. While
it's not immediately clear that this would give rise to an attack, it's also
absolutely not clear that it doesn't. So let's avoid that by using a DRBG
context that lives inside the restart context and persists across
return/resume cycles. That way the RESTARTABLE case uses exactly the
same pseudo-random numbers as the non-restartable case.
Testing and compile-time options:
- The case ECP_RESTARTABLE && !ECP_NO_INTERNAL_RNG is already tested by
component_test_no_use_psa_crypto_full_cmake_asan.
- The case ECP_RESTARTABLE && ECP_NO_INTERNAL_RNG didn't have a pre-existing
test so a component is added.
Testing and runtime options: when ECP_RESTARTABLE is enabled, the test suites
already contain cases where restart happens and cases where it doesn't
(because the operation is short enough or because restart is disabled (NULL
restart context)).
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
No effect so far, except on dependency checking, as the feature it's meant to
disable isn't implemented yet (so the descriptions in config.h and the
ChangeLog entry are anticipation for now).
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
Similarly to the recently-added tests for dependencies on CTR_DRBG:
constrained environments will probably want only one DRBG module, and we
should make sure that tests pass in such a configuration.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
Invasive testing strategy
Create a new header `common.h`.
Introduce a configuration option `MBEDTLS_TEST_HOOKS` for test-specific code, to be used in accordance with the invasive testing strategy.
The list in the pre-push hook was redundant with the list of `check_*`
components in all.sh, and unsurprisingly it was outdated.
Missing components were:
- check_recursion
- check_changelog
- check_test_cases
- check_python_files
- check_generate_test_code
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
The primary purpose is to use it to run all.sh -k -q in the pre-push hook, but
this can be useful in any circumstance where you're not interested in the full
output from each component and just want a short summary of which components
were run (and if any failed).
Note that only stdout from components is suppressed, stderr is preserved so
that errors are reported. This means components should avoid printing to
stderr in normal usage (ie in the absence of errors).
Currently all the `check_*` components obey this convention except:
- check_generate_test_code: unittest prints progress to stderr
- check_test_cases: lots of non-fatal warnings printed to stderr
These components will be fixed in follow-up commits.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
People who prefer to rely on HMAC_DRBG (for example because they use it for
deterministic ECDSA and don't want a second DRBG for code size reasons) should
be able to build and run the tests suites without CTR_DRBG.
Ideally we should make sure the level of testing (SSL) is the same regardless
of which DRBG modules is enabled, but that's a more significant piece of work.
For now, just ensure everything builds and `make test` passes.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
While at it, declare deps on ENTROPY as well.
A non-regression test will be added in a follow-up commit.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
Enable branch coverage output in basic_build_test.sh. This
includes enabling branch coverage output to the lcov make target,
which is disabled by default.
Signed-off-by: Dan Handley <dan.handley@arm.com>
TLS 1.3 and DTLS 1.2 + CID hide the real content type of a record
within the record's inner plaintext, while always using the same
content type for the protected record:
- TLS 1.3 always uses ApplicationData
- DTLS 1.2 + CID always uses a special CID content type.
This commit enhances the record encryption unit test to check
that the record content type is indeed correctly hidden.
Signed-off-by: Hanno Becker <hanno.becker@arm.com>
Convert all text files to Unix line endings unless they're Windows
stuff.
Make sure that all text files have a trailing newline.
Remove whitespace at the end of lines.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
We're only interested in files that are committed and pushed to be
included in Mbed TLS, not in any other files that may be lying around.
So ask git for the list of file names.
This script is primarily intended to run on the CI, and there it runs
on a fresh Git checkout plus potentially some other checkouts or
leftovers from a previous part of the CI job. It should also run
reasonably well on developer machines, where there may be various
additional files. In both cases, git is available.
Ad hoc directory exclusions are no longer needed.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Have an explicit list of exemptions for specific checks rather than
whitelisting files to check. Some checks, such as permissions, should
apply to all files.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Now that lifetimes have structures and secure element drivers handle
all the lifetimes with a certain location, update driver registration
to take a location as argument rather than a lifetime.
This commit updates the tests.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
This is supposed to be for GCC (or a compiler with a compatible
command line interface) targeting arm-none-eabi, so name it
accordingly.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Make it possible to use a compiler that isn't in $PATH, or that's
installed with a different name, or even a compiler for a different
target such as arm-linux-gnueabi.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Almost everything the selftest program does is in the test suites. But
just in case run the selftest program itself once in the full
configuration, and once in the default configuration with ASan, in
addition to running it out of box.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Use "no_deprecated" both in the name of the configuration and in the
name of all.sh components, rather than a mixture of "no_deprecated"
and "non_deprecated".
Make all.sh component names more consistent.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
build_deprecated combined the testing of deprecated features, and
testing of the build without deprecated features. Also, it violated the
component naming convention by being called build_xxx but running tests.
Replace it by:
* test_default_no_deprecated: check that you can remove deprecated
features from the default build.
* test_full_no_deprecated: check that the library builds when deprecated
features are disabled (and incidentally that the tests run).
* test_no_deprecated_warning: check that there are no warnings when
deprecated features are disabled and MBEDTLS_DEPRECATED_WARNING
is enabled.
* test_deprecated: test the deprecated features.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
It's deprecated, but not otherwise counter-indicated for the full
config: it doesn't conflict with anything and enabling it doesn't make
testing harder (especially since it defaults off in compat.sh).
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Ensure that there is a build with -pedantic in the full config, not
just in "exotic" configurations.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
<stdio.h> only declares the non-ISO-C function fileno() if an
appropriate POSIX symbol is defined or if using a compiler such as GCC
in non-pedantic mode. Define the appropriate POSIX symbol.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
It started out as be experimental, but it is now robust enough not to
break the rest, so there's no reason to leave it out.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
When parsing a certificate with the basic constraints extension
the max_pathlen that was read from it was incremented regardless
of its value. However, if the max_pathlen is equal to INT_MAX (which
is highly unlikely), an undefined behaviour would occur.
This commit adds a check to ensure that such value is not accepted
as valid. Relevant tests for INT_MAX and INT_MAX-1 are also introduced.
Certificates added in this commit were generated using the
test_suite_x509write, function test_x509_crt_check. Input data taken
from the "Certificate write check Server1 SHA1" test case, so the generated
files are like the "server1.crt", but with the "is_ca" field set to 1 and
max_pathlen as described by the file name.
Signed-off-by: Andrzej Kurek <andrzej.kurek@arm.com>
Enable MBEDTLS_X509_ALLOW_EXTENSIONS_NON_V3 in the full config. There's
no reason to keep it out. We weren't testing it at all on the CI.
Add a missing dependency on !MBEDTLS_X509_ALLOW_EXTENSIONS_NON_V3 to
some test cases that either were testing that v3 extensions are only
accepted in v3 certificates, or where parsing returns a different
error when MBEDTLS_X509_ALLOW_EXTENSIONS_NON_V3 is enabled.
Add a few positive and negative test cases with
MBEDTLS_X509_ALLOW_EXTENSIONS_NON_V3 enabled.
Fix one test case with MBEDTLS_X509_ALLOW_EXTENSIONS_NON_V3 where the
intended output of mbedtls_x509_crt_info had changed in
890819a597 but the test case was missed
because it was never executed.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
The intended logic around MBEDTLS_xxx_ALT is to exclude them from full
because they require the alternative implementation of one or more
library functions, except that MBEDTLS_PLATFORM_xxx_ALT are different:
they're alternative implementations of a platform function and they
have a built-in default, so they should be included in full. Document
this.
Fix a bug whereby MBEDTLS_PLATFORM_xxx_ALT didn't catch symbols where
xxx contains an underscore. As a consequence,
MBEDTLS_PLATFORM_GMTIME_R_ALT and MBEDTLS_PLATFORM_NV_SEED_ALT are now
enabled in the full config. Explicitly exclude
MBEDTLS_PLATFORM_SETUP_TEARDOWN_ALT because it behaves like the
non-platform ones, requiring an extra build-time dependency.
Explicitly exclude MBEDTLS_PLATFORM_NV_SEED_ALT from baremetal
because it requires MBEDTLS_ENTROPY_NV_SEED, and likewise explicitly
unset it from builds that unset MBEDTLS_ENTROPY_NV_SEED.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Simplify the code in minor ways. Each of this changes fixes a warning
from Pylint 2.4 that doesn't appear with Pylint 1.7.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Python 2 is no longer supported upstream. Actively drop compatibility
with Python 2.
Removing the inheritance of a class on object pacifies recent versions
of Pylint (useless-object-inheritance).
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
The "full" configuration excludes some deprecated or experimental
features. Enable the ones that have tests, don't have extra
requirements and don't turn off some other feature.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
The seedfile needs to have the size of the entropy accumulator, which
is 64 bytes (512 bits) since the entropy accumulator uses SHA-512 and
the seed size needs to be the same as the hash output (or larger).
We used to enable MBEDTLS_ENTROPY_FORCE_SHA256 in the full config, so
the entropy accumulator was 256 bits (32 bytes), and therefore a
32-byte seedfile worked. But we no longer turn on this option in the
full config, so the 32-byte seedfile no longer works.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
This commit introduces two changes:
- Add in_msg and out_msg calculations for buffer upsizing. This was previously
considered as unnecessary, but renegotiation using certain ciphersuites needs
this.
- Improving the way out_msg and in_msg pointers are calculated, so that even
if no resizing is introduced, the pointers remain the same;
New tests added:
- various renegotiation schemes with a range of MFL's and ciphersuites;
- an ssl-opt.sh test exercising two things that were problematic: renegotiation
with TLS-ECDHE-ECDSA-WITH-AES-128-CCM-8 and a server MFL that's smaller
than the one negotiated by the client.
Signed-off-by: Andrzej Kurek <andrzej.kurek@arm.com>
Since the server might want to have a different maximum fragment length
for the outgoing messages than the negotiated one - introduce a new way of
computing it. This commit also adds additional ssl-opt.sh tests ensuring
that the maximum fragment lengths are set as expected.
mbedtls_ssl_get_max_frag_len() is now a deprecated function,
being an alias to mbedtls_ssl_get_output_max_frag_len(). The behaviour
of this function is the same as before.
Signed-off-by: Andrzej Kurek <andrzej.kurek@arm.com>
The identifiers of the unmet dependencies of a test case are
stored in a buffer of fixed size that can be potentially to
small to store all the unmet dependencies. Indicate in test
reports if some unmet dependencies are missing.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Fix potential buffer overflow when tracking the unmet dependencies
of a test case. The identifiers of unmet dependencies are stored
in an array of fixed size. Ensure that we don't overrun the array.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Check Windows files for some issues, including permissions. Omit the
checks related to special characters (whitespace, line endings,
encoding) as appropriate.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
To test a file name exactly, prepend a / to the base name.
files_to_check actually checks suffixes, not file names, so rename it
to extensions_to_check.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Fix an intermittent crash when running test suites in non-verbose
mode (i.e. with -v off) and with the outcome file enabled. The
array unmet_dependencies was only filled in verbose mode, but was used
in write_outcome_result regardless.
Since unmet_dependencies only ever contains strings that are integers
written out in decimal, store the integer instead. Do this
unconditionally since it doesn't cost any extra memory.
It would be better to record the dependency names, both in the verbose
output and in the outcome file. But the dependency names are not
currently available at runtime.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
There are currently 4 tests in ssl-opt.sh with either -C "resend" or -S
"resend", that is, asserting that no retransmission will occur. They sometimes
fail on loaded CI machines as one side doesn't send a message fast enough,
causing the other side to retransmit, causing the test to fail.
(For the "reconnect" test there was an other issue causing random failures,
fixed in a previous commit, but even after that fix the test would still
sometimes randomly fail, even if much more rarely.)
While it's a hard problem to fix in a general and perfect way, in practice the
probability of failures can be drastically reduced by making the timeout
values much larger.
For some tests, where retransmissions are actually expected, this would have
the negative effect of increasing the average running time of the test, as
each side would wait for longer before it starts retransmission, so we have a
trade-off between average running time and probability of spurious failures.
But for tests where retransmission is not expected, there is no such trade-off
as the expected running time of the test (assuming the code is correct most of
the time) is not impacted by the timeout value. So the only negative effect of
increasing the timeout value is on the worst-case running time on the test,
which is much less important, as test should only fail quite rarely.
This commit addresses the easy case of tests that don't expect retransmission
by increasing the value of their timeout range to 10s-20s. This value
corresponds to the value used for tests that assert `-S "autoreduction"` which
are in the same case and where the current value seems acceptable so far.
It also represents an increase, compared to the values before this commit, of
a factor 20 for the "reconnect" tests which were frequently observed to fail
in the CI, and of a factor 10 for the first two "DTLS proxy" tests, which were
observed to fail much less frequently, so hopefully the new values are enough
to reduce the probability of spurious failures to an acceptable level.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
The server must check client reachability (we chose to do that by checking a
cookie) before destroying the existing association (RFC 6347 section 4.2.8).
Let's make sure we do, by having a proxy-in-the-middle inject a ClientHello -
the server should notice, but not destroy the connection.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
Conflicts:
* .github/issue_template.md, .github/pull_request_template.md:
The changes in Mbed Crypto are not relevant to Mbed TLS. Keep the
mbedtls versions.
check_python_files was optional in all.sh because we used to have CI
machines where pylint wasn't available. But this had the downside that
check_python_files kept breaking because it wasn't checked in the CI.
Now our CI has pylint and check_python_files should not be optional.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
On some systems, such as Ubuntu up to 19.04, `pylint` is for Python 2
and `pylint3` is for Python 3, so we should not use `pylint` even if
it's available.
Use the Python module instead of the trivial shell wrapper. This way
we can make sure to use the correct Python version.
Fix#3111
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
- "Default" should only be used for tests that actually use the defaults (ie,
not passing options on the command line, except maybe debug/dtls)
- All tests in the "Encrypt then MAC" group should start with that string as a
common prefix
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
Merge the latest state of the target branch (mbedtls/development) into the
pull request to merge mbed-crypto into mbedtls.
Conflicts:
* ChangeLog: add/add conflict. Resolve by using the usual section order.
Add dependencies on !MBEDTLS_SHA512_NO_SHA384 to X.509 and SSL unit
tests that use SHA-384 (identified based on having a description that
contains "SHA384" or "SHA-384").
Rename identifiers containing double-underscore (`__`) to avoid `__`.
The reason to avoid double-underscore is that all identifiers
containing double-underscore are reserved in C++. Rename all such
identifiers that appear in any public header, including ssl_internal.h
which is in principle private but in practice is installed with the
public headers.
This commit makes check-names.sh pass.
```
perl -i -pe 's/\bMBEDTLS_SSL__ECP_RESTARTABLE\b/MBEDTLS_SSL_ECP_RESTARTABLE_ENABLED/g; s/\bMBEDTLS_KEY_EXCHANGE_(_\w+)_(_\w+)\b/MBEDTLS_KEY_EXCHANGE${1}${2}/g' include/mbedtls/*.h library/*.c programs/*/*.c scripts/data_files/rename-1.3-2.0.txt tests/suites/*.function
```
Look for any other invocation of test scripts that was removed: look for a change that removes a line (`^-.*…`) containing one of the names of a test script (without its path because it may be used with a relative path). Look for `ssl-opt.sh` and `compat.sh`, as well any file in `tests/scripts` that only exists in tls.
```
git diff 'HEAD^{/^Merge}~1' HEAD --diff-filter=M -- . ':!library/error.c' ':!library/version_features.c' ':!programs/test/query_config.c' ':!visualc' ':!*.pdf' ':!*.der' | grep -E "^-.*($(comm -23 <(git ls-tree -r --name-only 'HEAD^{/^Merge}~1') <(git ls-tree -r --name-only $(git merge-base upstream-crypto/development 'HEAD^{/^Merge}^2')) | sed -n 's!^tests/scripts/!!p' | sed 's/\./\\./g' | tr '\n' '|')ssl-opt\.sh|compat\.sh)" | grep -v '^---'
```
This only turns up changes in `basic-in-docker.sh`.
The merge of mbed-crypto removed some tls coverage. Restore it. Also
remove references to the `crypto` subdirectory brought by the mbedtls
side of the merge. In more detail:
* `tests/scripts/all.sh`:
* `fuzz` in comments (×2): restore it.
* `CTEST_OUTPUT_ON_FAILURE=1`: don't remove it.
* `cd crypto` for `make clean`: don't restore it.
* `cleanup`: do restore `programs/fuzz/Makefile`. Don't go into `crypto`. Keep only one copy of the calls to `rm` in `cmake_subproject`.
* Comment legacy options: don't remove it.
* `crypto/Makefile` and `pre_check_seedfile`: don't restore either. See below regarding the lack of need for `pre_check_seedfile`.
* blank line in `pre_print_configuration`: restore it.
* blank line before `#### Build and test`: restore it.
* SSL tests in `component_test_full_cmake_gcc_asan` and zlib components: restore it.
* `component_test_no_pem_no_fs` (×2): the merge placed two copies in different locations. Reconcile them: unset PSA storage like in crypto, and call `ssl-opt.sh` like in tls. Put the merged version at the tls location.
* `component_test_everest`: do add it at the tls location.
* `component_test_small_mbedtls_ssl_dtls_max_buffering`: restore the tls value.
* `component_test_new_ecdh_context`…: move `component_test_new_ecdh_context` before `component_test_everest` and add a calls to `compat.sh` and `ssl-opt.sh` like in `component_test_everest`. Remove the redundant crypto-only `component_test_everest`. Don't remove `component_test_psa_collect_statuses`.
* `component_test_full_cmake_clang`: don't remove `clang` in the `msg` call. Don't remove the call to `test_psa_constant_names.py`.
* `component_test_full_make_gcc_o0`: remove it. It's subsumed by `component_test_gcc_opt`.
* `component_build_deprecated`: don't remove anything.
* `component_test_memory_buffer_allocator`: restore `ssl-opt.sh`.
* `component_test_when_no_ciphersuites_have_mac`: restore it.
* `component_test_platform_calloc_macro`: don't restore `unset MBEDTLS_MEMORY_BUFFER_ALLOC_C` which is now redundant. Don't restore explicit flags instead of `$ASAN_CFLAGS`.
* `component_test_aes_fewer_tables`…: don't remove it.
* `component_test_m32_o1`: restore SSL testing.
* `component_test_m32_everest`: restore SSL testing.
* `component_test_min_mpi_window_size`…: don't remove it.
* `component_test_valgrind`: do restore the tls version of the comment.
* `run_component`: don't remove the seedfile creation. This is better than `pre_check_seedfile` (see below).
* `pre_check_seedfile`: don't restore it. `pre_check_seedfile` (from tls) creates a seedfile once and for all. This is not good enough if a component fails in such a way as to leave a broken seedfile, or if a component leaves a seedfile with a size that's wrong for the next component to run. Instead (from crypto), `run_component` creates a sufficiently large seedfile before each component.
Merge `unremove-non-crypto` into `mbedtls/development`. The branch
`unremove-non-crypto` was obtained by starting from `mbed-crypto/development`,
then reverting many commits that removed X.509 and TLS functionality when Mbed
Crypto forked from Mbed TLS (the “unremoval”), then make a few tweaks to
facilitate the merge.
The unremoval step restored old versions of some tls files. If a file doesn't
exist in mbed-crypto, check out the mbedtls version, regardless of what
happened during the unremoval of tls files in the crypto tree. Also
unconditionally take the mbedtls version of a few files where the
modifications are completely project-specific and are not relevant in
mbed-crypto:
* `.github/issue_template.md`: completely different. We may want to reconcile
them independently as a follow-up.
* `.travis.yml`: would only be reverted to an earlier tls version.
* `README.md`: completely different. We may want to reconcile them
independently as a follow-up.
* `doxygen/input/doc_mainpage.h`: the changes in crypto were minimal and not
relevant except as a stopgap as mbed-crypto did not have its own product
versioning in the Doxygen documentation.
* `tests/.jenkins/Jenkinsfile`: completely different.
* `tests/data_files/Makefile`: there were no changes in mbed-crypto,
but the unremoval step restored an old version.
Shell script for everything to do after the merge apart from the conflict
resolution:
```
tls_files=($(comm -23 <(git ls-tree -r --name-only HEAD) <(git ls-tree -r --name-only $(git merge-base upstream-crypto/development MERGE_HEAD))))
tls_files+=($tls_files .github/issue_template.md .travis.yml README.md doxygen/input/doc_mainpage.h tests/.jenkins/Jenkinsfile tests/data_files/Makefile)
git checkout --theirs HEAD -- $tls_files
git add -- $tls_files
```
Resolve the remaining conflicts:
* `library/CMakeLists.txt`:
* Keep the TLS definition of `src_crypto`
* `USE_SHARED_MBEDTLS_LIBRARY`: keep all three libraries, with both
`include` and `crypto/include` in `target_include_directories`, all with
version `2.21.0`.
* `programs/Makefile`:
* Reconcile the APPS lists (add/add from a differently-formatted common
ancestor): insert the `psa/*` from crypto into the tls list.
* Keep the `fuzz` target defined only in tls version.
* Keep the recipe (only in tls version) cleaning `ssl_pthread_server`
stuff for the `clean` target.
* `scripts/config.py`:
* `include_in_full`: add/add conflict. Keep both.
* `tests/scripts/all.sh`:
* `component_test_no_use_psa_crypto_full_cmake_asan`: partially old
version in crypto. Take the tls version.
* `component_test_malloc_0_null` and more: take
`component_test_malloc_0_null` from crypto (with `config.py` rather than
`config.pl`, and with `$ASAN_FLAGS` rather than an explicit list), but
add the call to `ssl-opt.sh` from tls. Take the other components from
crypto.
With this commit, building and running the unit tests with both `make ` and
`cmake` work in the default configuration on Linux. Other platforms, build
systems and configurations are likely not to work, and there is some
regression in test coverage.
There is some loss of functionality because the unremoval step restored older
versions of tls content. This commit contains the latest tls version of
tls-only files, but some changes from the tls side in files that existed on
both sides have regressed. Most problematic changes are hunks that remove some
tls-specific feature and contain either a C preprocessor symbol identifying a
tls-specific module or option, or the name of a tls-specific file. Hunks
that remove a tls-specific preprocessor symbol can be identified with the
regular expression `^-.*MBEDTLS_(ERR_)?(PKCS11|X509|NET|SSL)_`.
Subsequent commits will revert a few parts of the patch from this merge commit
in order to restore the tls functionality that it removes, ensure that the
test coverage includes what was covered in either branch, and fix test
failures.
This reverts commit 9b90f2e294.
Conflicts:
* tests/scripts/all.sh: do the same changes, dancing around the new
outcome file feature and components added in the same places.
Make sure that the components that are getting added back are at the
same locations as where they are now in mbedtls.
This reverts commit 9afb2e9921.
Conflicts:
* include/CMakeLists.txt
* "Make config.h available" comment: there has been a change
adjacent to where it was removed. Just re-add what was removed.
* tests/CMakeLists.txt:
* compat.sh: there has been a change immediately before where it was
removed. Just re-add what was removed.
This reverts commit 120d571e8e.
Conflicts:
* tests/CMakeLists.txt:
* target_include_directories: the instruction whose addition is to
be reverted has changed. Remove what is there now.
This reverts commit b478bb6ddb.
Conflicts:
* tests/CMakeLists.txt: revert the introduction of exe_name, but keep
the addition of ${CMAKE_SOURCE_DIR}/crypto/library/ to
target_include_directories.
This reverts commit d832f187f7.
Conflicts:
* CMakeLists.txt:
* USE_PKCS11_HELPER_LIBRARY: there has been a change immediately before
where it was removed. Just re-add what was removed.
* tests/CMakeLists.txt:
* USE_PKCS11_HELPER_LIBRARY: there has been a change immediately before
where it was removed. Just re-add what was removed.
This reverts commit d874a1fd14.
Conflicts:
* CMakeLists.txt:
* ENABLE_ZLIB_SUPPORT: there has been a change immediately after
where it was removed. Just re-add what was removed.
* tests/CMakeLists.txt:
* ENABLE_ZLIB_SUPPORT: there has been a change immediately after
where it was removed. Just re-add what was removed.
This reverts commit 8298d70bee.
Conflicts:
* library/Makefile: removal of SOEXT_X509 and SOEXT_TLS vs change of
value of SOEXT_CRYPTO. Keep all, with the new value of SOEXT_CRYPTO.
This reverts commit 1ad37309e4.
Conflicts:
* tests/scripts/test-ref-configs.pl:
* config-ccm-psk-tls1_2.h: there has been an addition of
"config-symmetric-only.h" at the place where the configurations
that are added back were removed. Keep this configuration.
This reverts commit 1c66e48670.
Conflicts:
* include/mbedtls/check_config.h:
* MBEDTLS_SSL_PROTO_SSL3: there has been an addition (of
MBEDTLS_SHA512_NO_SHA384) at the place where it was removed. Re-add it
after (alphabetical order).
* MBEDTLS_ENABLE_WEAK_CIPHERSUITES: there has been an addition (of
MBEDTLS_CTR_DRBG_USE_128_BIT_KEY) at the place where it was removed.
Re-add it after (alphabetical order).
* MBEDTLS_SSL_ALL_ALERT_MESSAGES: there has been an addition (of
MBEDTLS_SHA512_SMALLER) at the place where it was removed. Re-add it
after (alphabetical order).
* include/mbedtls/config.h:
* MBEDTLS_ENABLE_WEAK_CIPHERSUITES: there has been an addition (of
MBEDTLS_CTR_DRBG_USE_128_BIT_KEY) at the place where it was removed.
Re-add it after (alphabetical order).
* MBEDTLS_SSL_ALL_ALERT_MESSAGES: there has been an addition (of
MBEDTLS_SHA512_SMALLER) at the place where it was removed. Re-add it
after (alphabetical order).
* library/version_features.c: re-generate by running
scripts/generate_features.pl.
* programs/test/query_config.c: re-generate by running
scripts/generate_query_config.pl.
* scripts/config.pl: this file has been replaced by config.py. Port
the reversed changes to config.py:
* Revert removing three symbols from the list of symbols to
exclude from full.
* Revert removing one symbol (MBEDTLS_NET_C) from the list of symbols
to exclude from baremetal.
* scripts/footprint.sh:
* Re-add the line to unset MBEDTLS_NET_C, but with config.py instead of
config.pl.
* tests/scripts/all.sh:
* component_test_no_platform: re-add the line to unset MBEDTLS_NET_C, but
with config.py instead of config.pl.
* component_build_arm_none_eabi_gcc,
component_build_arm_none_eabi_gcc_no_udbl_division,
component_build_arm_none_eabi_gcc_no_64bit_multiplication,
component_build_armcc: these components now use the baremetal
configuration, so they do not need to turn off MBEDTLS_NET_C explicitly.
This reverts commit bb1f701212.
* include/mbedtls/check_config.h:
* MBEDTLS_X509_RSASSA_PSS_SUPPORT: there has been an addition (of
MBEDTLS_SHA512_NO_SHA384) at the place where it was removed.
Re-add it before MBEDTLS_SHA512_NO_SHA384 to keep it grouped
with MBEDTLS_RSA_C.
Conflicts:
* scripts/config.pl: this file has been replaced by config.py. Port
the reversed changes to config.py:
* Revert removing three symbols from the list of symbols to
exclude from full.
Pylint when installed as a distro package can be installed as pylint3, whilst as
a PEP egg, it can be installed as pylint.
This commit changes the scripts to first use pylint if installed, and optionally
look for pylint3 if not installed. This is to allow a preference for the PEP
version over the distro version, assuming the PEP one is more likely to be
the correct one.
Signed-off-by: Simon Butcher <simon.butcher@arm.com>
Counting of the fragments has been shifted from the writing section to
the reading. This is more reliable because one reading is made for one
fragment and during one write the library can internally divide data
into two fragments
Signed-off-by: Piotr Nowicki <piotr.nowicki@arm.com>
Initialize variables to NULL before doing any operations that might fail.
This fixes a case where the allocation fails on the first context, which
previously made the code free the second, uninitialized context.
Signed-off-by: Andrzej Kurek <andrzej.kurek@arm.com>
Add a conditional buffer resizing feature. Introduce tests exercising
it in various setups (serialization, renegotiation, mfl manipulations).
Signed-off-by: Andrzej Kurek <andrzej.kurek@arm.com>
The .pl version is now a compat wrapper around the .py script. Better call the
.py script directly.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
Adds an additional boundary check to the test parameter bytes_arg in
generate_random() in test_suite_psa_crypto.function.
This is to check against a possible underflow, and to avoid a warning,
"argument ... exceeds maximum object size", (-Werror=alloc-size-larger-than)
that GCC 7 generates.
Signed-off-by: Simon Butcher <simon.butcher@arm.com>
Exercise the feature alone, with record splitting and DTLS connection ID.
Signed-off-by: Andrzej Kurek <andrzej.kurek@arm.com>
Signed-off-by: Darryl Green <darryl.green@arm.com>
For this test it is good to have a handshake messages length as big as
possible, so for the server the certificate verification mode is
changed from default NONE to REQUIRED. It requires the client to send
certificate date to the server during handshake
Signed-off-by: Piotr Nowicki <piotr.nowicki@arm.com>
Create and provide a structure with default options so that the caller won't have
to pass all of the parameters each time the handshake is called. In the future
this can be improved so that the options are passed as a string, just like in
ssl-opt.sh.
Signed-off-by: Andrzej Kurek <andrzej.kurek@arm.com>
The ssl-opt.sh test cases using session resumption tend to fail occasionally
on the CI due to a race condition in how ssl_server2 and ssl_client2 handle
the reconnection cycle.
The server does the following in order:
- S1 send application data
- S2 send a close_notify alert
- S3 close the client socket
- S4 wait for a "new connection" (actually a new datagram)
- S5 start a handshake
The client does the following in order:
- C1 wait for and read application data from the server
- C2 send a close_notify alert
- C3 close the server socket
- C4 reset session data and re-open a server socket
- C5 start a handshake
If the client has been able to send the close_notify (C2) and if has been
delivered to the server before if closes the client socket (S3), when the
server reaches S4, the datagram that we start the new connection will be the
ClientHello and everything will be fine.
However if S3 wins the race and happens before the close_notify is delivered,
in S4 the close_notify is what will be seen as the first datagram in a new
connection, and then in S5 this will rightfully be rejected as not being a
valid ClientHello and the server will close the connection (and go wait for
another one). The client will then fail to read from the socket and exit
non-zero and the ssl-opt.sh harness will correctly report this as a failure.
In order to avoid this race condition in test using ssl_client2 and
ssl_server2, this commits introduces a new command-line option
skip_close_notify to ssl_client2 and uses it in all ssl-opt.sh tests that use
session resumption with DTLS and ssl_server2.
This works because ssl_server2 knows how many messages it expects in each
direction and in what order, and closes the connection after that rather than
relying on close_notify (which is also why there was a race in the first
place).
Tests that use another server (in practice there are two of them, using
OpenSSL as a server) wouldn't work with skip_close_notify, as the server won't
close the connection until the client sends a close_notify, but for the same
reason they don't need it (there is no race between receiving close_notify and
closing as the former is the cause of the later).
An alternative approach would be to make ssl_server2 keep the connection open
until it receives a close_notify. Unfortunately it creates problems for tests
where we simulate a lossy network, as the close_notify could be lost (and the
client can't retransmit it). We could modify udp_proxy with an option to never
drop alert messages, but when TLS 1.3 comes that would no longer work as the
type of messages will be encrypted.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
(Only the top-level ones, ie, for each call to eg asn1_get_mpi(), ensure
there's at least one test case that makes this call fail in one way, but don't
test the various ways to make asn1_get_mpi fail - that should be covered
elsewhere.)
- the new checks added by the previous commits needed exercising
- existing tests sometimes had wrong descriptions or where passing for the
wrong reason (eg with the "length mismatch" test, the function actually
failed before reaching the length check)
- while at it, add tests for the rest as well
The valid minimal-size key was generated with:
openssl genrsa 128 2>/dev/null | openssl rsa -outform der 2>/dev/null | xxd -p
Exercise the library functions with calloc returning NULL for a size
of 0. Make this a separate job with UBSan (and ASan) to detect
places where we try to dereference the result of calloc(0) or to do
things like
buf = calloc(size, 1);
if (buf == NULL && size != 0) return INSUFFICIENT_MEMORY;
memcpy(buf, source, size);
which has undefined behavior when buf is NULL at the memcpy call even
if size is 0.
This is needed because other test components jobs either use the system
malloc which returns non-NULL on Linux and FreeBSD, or the
memory_buffer_alloc malloc which returns NULL but does not give as
useful feedback with ASan (because the whole heap is a single C
object).
As the SSL programs, like ssl_client2 and ssl_server2, are dependent on
SSL and therefore about to be removed, the only consumer of query_config
is the query_compile_time_config test. As such, it makes sense to move
query_config to be next to what uses it.
Goals:
* Build with common compilers with common options, so that we don't
miss a (potentially useful) warning only triggered with certain
build options.
* A previous commit removed -O0 test jobs, leaving only the one with
-m32. We have inline assembly that is disabled with -O0, falling
back to generic C code. This commit restores a test that runs the
generic C code on a 64-bit platform.
Files deleted by us: keep them deleted.
```
git rm $(git status -s | sed -n 's/^DU //p')
```
Individual files with conflicts:
* `README.md`: keep the crypto version.
* `doxygen/input/doc_mainpage.h`: keep the crypto version (with an obsolete Mbed Crypto version number).
* `include/mbedtls/error.h`:
* `ERROR`: similar additions made through parallel commits, with only whitespace differences. Align with the tls version.
* `library/CMakeLists.txt`: keep the crypto version.
* `library/Makefile`: keep the crypto version.
* `scripts/generate_errors.pl`: keep the crypto version (the relevant changes were made through parallel commits).
* `tests/scripts/check-test-cases.py`:
* `Results`: keep the crypto version, which has both the new argument to the constructor (added in crypto only) and the class docstring (added through parallel commits).
* `tests/suites/helpers.function`:
* `ARRAY_LENGTH`, `ASSERT_ALLOC`: additions in the same location. Keep both, in indifferent order.
* `tests/suites/target_test.function`:
* `receive_uint32`: keep the crypto version which has an additional bug fix. The tls changes made in tls are irrelevant after this bug fix.
* `visualc/VS2010/mbedTLS.vcxproj`: run `scripts/generate_visualc_files.pl`.
Review of non-conflicting changes:
* `all.sh`: 1 change.
* zlib test components: don't add them.
* `include/CMakeLists.txt`: 1 change.
* `target_include_directories`: doesn't work as is (different target name). Don't take the change.
* All other non-conflicting changes: take them.
Let the caller decide what certificates and keys are loaded (EC/RSA)
instead of loading both for the server, and an unspecified one
for the client. Use only DER encoding.
