#!/bin/sh # compat.sh # # Copyright (c) 2012-2016, ARM Limited, All Rights Reserved # SPDX-License-Identifier: Apache-2.0 # # Licensed under the Apache License, Version 2.0 (the "License"); you may # not use this file except in compliance with the License. # You may obtain a copy of the License at # # http://www.apache.org/licenses/LICENSE-2.0 # # Unless required by applicable law or agreed to in writing, software # distributed under the License is distributed on an "AS IS" BASIS, WITHOUT # WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. # See the License for the specific language governing permissions and # limitations under the License. # # This file is part of Mbed TLS (https://tls.mbed.org) # # Purpose # # Test interoperbility with OpenSSL, GnuTLS as well as itself. # # Check each common ciphersuite, with each version, both ways (client/server), # with and without client authentication. set -u # Limit the size of each log to 10 GiB, in case of failures with this script # where it may output seemingly unlimited length error logs. ulimit -f 20971520 # initialise counters TESTS=0 FAILED=0 SKIPPED=0 SRVMEM=0 # default commands, can be overridden by the environment : ${M_SRV:=../programs/ssl/ssl_server2} : ${M_CLI:=../programs/ssl/ssl_client2} : ${OPENSSL_CMD:=openssl} # OPENSSL would conflict with the build system : ${GNUTLS_CLI:=gnutls-cli} : ${GNUTLS_SERV:=gnutls-serv} # do we have a recent enough GnuTLS? if ( which $GNUTLS_CLI && which $GNUTLS_SERV ) >/dev/null 2>&1; then G_VER="$( $GNUTLS_CLI --version | head -n1 )" if echo "$G_VER" | grep '@VERSION@' > /dev/null; then # git version PEER_GNUTLS=" GnuTLS" else eval $( echo $G_VER | sed 's/.* \([0-9]*\)\.\([0-9]\)*\.\([0-9]*\)$/MAJOR="\1" MINOR="\2" PATCH="\3"/' ) if [ $MAJOR -lt 3 -o \ \( $MAJOR -eq 3 -a $MINOR -lt 2 \) -o \ \( $MAJOR -eq 3 -a $MINOR -eq 2 -a $PATCH -lt 15 \) ] then PEER_GNUTLS="" else PEER_GNUTLS=" GnuTLS" if [ $MINOR -lt 4 ]; then GNUTLS_MINOR_LT_FOUR='x' fi fi fi else PEER_GNUTLS="" fi # default values for options MODES="tls1 tls1_1 tls1_2 dtls1 dtls1_2" VERIFIES="NO YES" TYPES="ECDSA RSA PSK" FILTER="" # exclude: # - NULL: excluded from our default config # - RC4, single-DES: requires legacy OpenSSL/GnuTLS versions # avoid plain DES but keep 3DES-EDE-CBC (mbedTLS), DES-CBC3 (OpenSSL) # - ARIA: not in default config.h + requires OpenSSL >= 1.1.1 # - ChachaPoly: requires OpenSSL >= 1.1.0 # - 3DES: not in default config EXCLUDE='NULL\|DES\|RC4\|ARCFOUR\|ARIA\|CHACHA20-POLY1305' VERBOSE="" MEMCHECK=0 PEERS="OpenSSL$PEER_GNUTLS mbedTLS" # hidden option: skip DTLS with OpenSSL # (travis CI has a version that doesn't work for us) : ${OSSL_NO_DTLS:=0} print_usage() { echo "Usage: $0" printf " -h|--help\tPrint this help.\n" printf " -f|--filter\tOnly matching ciphersuites are tested (Default: '$FILTER')\n" printf " -e|--exclude\tMatching ciphersuites are excluded (Default: '$EXCLUDE')\n" printf " -m|--modes\tWhich modes to perform (Default: '$MODES')\n" printf " -t|--types\tWhich key exchange type to perform (Default: '$TYPES')\n" printf " -V|--verify\tWhich verification modes to perform (Default: '$VERIFIES')\n" printf " -p|--peers\tWhich peers to use (Default: '$PEERS')\n" printf " \tAlso available: GnuTLS (needs v3.2.15 or higher)\n" printf " -M|--memcheck\tCheck memory leaks and errors.\n" printf " -v|--verbose\tSet verbose output.\n" } get_options() { while [ $# -gt 0 ]; do case "$1" in -f|--filter) shift; FILTER=$1 ;; -e|--exclude) shift; EXCLUDE=$1 ;; -m|--modes) shift; MODES=$1 ;; -t|--types) shift; TYPES=$1 ;; -V|--verify) shift; VERIFIES=$1 ;; -p|--peers) shift; PEERS=$1 ;; -v|--verbose) VERBOSE=1 ;; -M|--memcheck) MEMCHECK=1 ;; -h|--help) print_usage exit 0 ;; *) echo "Unknown argument: '$1'" print_usage exit 1 ;; esac shift done # sanitize some options (modes checked later) VERIFIES="$( echo $VERIFIES | tr [a-z] [A-Z] )" TYPES="$( echo $TYPES | tr [a-z] [A-Z] )" } log() { if [ "X" != "X$VERBOSE" ]; then echo "" echo "$@" fi } # is_dtls is_dtls() { test "$1" = "dtls1" -o "$1" = "dtls1_2" } # minor_ver minor_ver() { case "$1" in ssl3) echo 0 ;; tls1) echo 1 ;; tls1_1|dtls1) echo 2 ;; tls1_2|dtls1_2) echo 3 ;; *) echo "error: invalid mode: $MODE" >&2 # exiting is no good here, typically called in a subshell echo -1 esac } filter() { LIST="$1" NEW_LIST="" if is_dtls "$MODE"; then EXCLMODE="$EXCLUDE"'\|RC4\|ARCFOUR' else EXCLMODE="$EXCLUDE" fi for i in $LIST; do NEW_LIST="$NEW_LIST $( echo "$i" | grep "$FILTER" | grep -v "$EXCLMODE" )" done # normalize whitespace echo "$NEW_LIST" | sed -e 's/[[:space:]][[:space:]]*/ /g' -e 's/^ //' -e 's/ $//' } # OpenSSL 1.0.1h with -Verify wants a ClientCertificate message even for # PSK ciphersuites with DTLS, which is incorrect, so disable them for now check_openssl_server_bug() { if test "X$VERIFY" = "XYES" && is_dtls "$MODE" && \ echo "$1" | grep "^TLS-PSK" >/dev/null; then SKIP_NEXT="YES" fi } filter_ciphersuites() { if [ "X" != "X$FILTER" -o "X" != "X$EXCLUDE" ]; then # Ciphersuite for mbed TLS M_CIPHERS=$( filter "$M_CIPHERS" ) # Ciphersuite for OpenSSL O_CIPHERS=$( filter "$O_CIPHERS" ) # Ciphersuite for GnuTLS G_CIPHERS=$( filter "$G_CIPHERS" ) fi # OpenSSL <1.0.2 doesn't support DTLS 1.2. Check what OpenSSL # supports from the s_server help. (The s_client help isn't # accurate as of 1.0.2g: it supports DTLS 1.2 but doesn't list it. # But the s_server help seems to be accurate.) if ! $OPENSSL_CMD s_server -help 2>&1 | grep -q "^ *-$MODE "; then M_CIPHERS="" O_CIPHERS="" fi # For GnuTLS client -> mbed TLS server, # we need to force IPv4 by connecting to 127.0.0.1 but then auth fails if [ "X$VERIFY" = "XYES" ] && is_dtls "$MODE"; then G_CIPHERS="" fi } reset_ciphersuites() { M_CIPHERS="" O_CIPHERS="" G_CIPHERS="" } # Ciphersuites that can be used with all peers. # Since we currently have three possible peers, each ciphersuite should appear # three times: in each peer's list (with the name that this peer uses). add_common_ciphersuites() { case $TYPE in "ECDSA") if [ `minor_ver "$MODE"` -gt 0 ] then M_CIPHERS="$M_CIPHERS \ TLS-ECDHE-ECDSA-WITH-NULL-SHA \ TLS-ECDHE-ECDSA-WITH-RC4-128-SHA \ TLS-ECDHE-ECDSA-WITH-3DES-EDE-CBC-SHA \ TLS-ECDHE-ECDSA-WITH-AES-128-CBC-SHA \ TLS-ECDHE-ECDSA-WITH-AES-256-CBC-SHA \ " G_CIPHERS="$G_CIPHERS \ +ECDHE-ECDSA:+NULL:+SHA1 \ +ECDHE-ECDSA:+ARCFOUR-128:+SHA1 \ +ECDHE-ECDSA:+3DES-CBC:+SHA1 \ +ECDHE-ECDSA:+AES-128-CBC:+SHA1 \ +ECDHE-ECDSA:+AES-256-CBC:+SHA1 \ " O_CIPHERS="$O_CIPHERS \ ECDHE-ECDSA-NULL-SHA \ ECDHE-ECDSA-RC4-SHA \ ECDHE-ECDSA-DES-CBC3-SHA \ ECDHE-ECDSA-AES128-SHA \ ECDHE-ECDSA-AES256-SHA \ " fi if [ `minor_ver "$MODE"` -ge 3 ] then M_CIPHERS="$M_CIPHERS \ TLS-ECDHE-ECDSA-WITH-AES-128-CBC-SHA256 \ TLS-ECDHE-ECDSA-WITH-AES-256-CBC-SHA384 \ TLS-ECDHE-ECDSA-WITH-AES-128-GCM-SHA256 \ TLS-ECDHE-ECDSA-WITH-AES-256-GCM-SHA384 \ " G_CIPHERS="$G_CIPHERS \ +ECDHE-ECDSA:+AES-128-CBC:+SHA256 \ +ECDHE-ECDSA:+AES-256-CBC:+SHA384 \ +ECDHE-ECDSA:+AES-128-GCM:+AEAD \ +ECDHE-ECDSA:+AES-256-GCM:+AEAD \ " O_CIPHERS="$O_CIPHERS \ ECDHE-ECDSA-AES128-SHA256 \ ECDHE-ECDSA-AES256-SHA384 \ ECDHE-ECDSA-AES128-GCM-SHA256 \ ECDHE-ECDSA-AES256-GCM-SHA384 \ " fi ;; "RSA") M_CIPHERS="$M_CIPHERS \ TLS-DHE-RSA-WITH-AES-128-CBC-SHA \ TLS-DHE-RSA-WITH-AES-256-CBC-SHA \ TLS-DHE-RSA-WITH-CAMELLIA-128-CBC-SHA \ TLS-DHE-RSA-WITH-CAMELLIA-256-CBC-SHA \ TLS-DHE-RSA-WITH-3DES-EDE-CBC-SHA \ TLS-RSA-WITH-AES-256-CBC-SHA \ TLS-RSA-WITH-CAMELLIA-256-CBC-SHA \ TLS-RSA-WITH-AES-128-CBC-SHA \ TLS-RSA-WITH-CAMELLIA-128-CBC-SHA \ TLS-RSA-WITH-3DES-EDE-CBC-SHA \ TLS-RSA-WITH-RC4-128-SHA \ TLS-RSA-WITH-RC4-128-MD5 \ TLS-RSA-WITH-NULL-MD5 \ TLS-RSA-WITH-NULL-SHA \ " G_CIPHERS="$G_CIPHERS \ +DHE-RSA:+AES-128-CBC:+SHA1 \ +DHE-RSA:+AES-256-CBC:+SHA1 \ +DHE-RSA:+CAMELLIA-128-CBC:+SHA1 \ +DHE-RSA:+CAMELLIA-256-CBC:+SHA1 \ +DHE-RSA:+3DES-CBC:+SHA1 \ +RSA:+AES-256-CBC:+SHA1 \ +RSA:+CAMELLIA-256-CBC:+SHA1 \ +RSA:+AES-128-CBC:+SHA1 \ +RSA:+CAMELLIA-128-CBC:+SHA1 \ +RSA:+3DES-CBC:+SHA1 \ +RSA:+ARCFOUR-128:+SHA1 \ +RSA:+ARCFOUR-128:+MD5 \ +RSA:+NULL:+MD5 \ +RSA:+NULL:+SHA1 \ " O_CIPHERS="$O_CIPHERS \ DHE-RSA-AES128-SHA \ DHE-RSA-AES256-SHA \ DHE-RSA-CAMELLIA128-SHA \ DHE-RSA-CAMELLIA256-SHA \ EDH-RSA-DES-CBC3-SHA \ AES256-SHA \ CAMELLIA256-SHA \ AES128-SHA \ CAMELLIA128-SHA \ DES-CBC3-SHA \ RC4-SHA \ RC4-MD5 \ NULL-MD5 \ NULL-SHA \ " if [ `minor_ver "$MODE"` -gt 0 ] then M_CIPHERS="$M_CIPHERS \ TLS-ECDHE-RSA-WITH-AES-128-CBC-SHA \ TLS-ECDHE-RSA-WITH-AES-256-CBC-SHA \ TLS-ECDHE-RSA-WITH-3DES-EDE-CBC-SHA \ TLS-ECDHE-RSA-WITH-RC4-128-SHA \ TLS-ECDHE-RSA-WITH-NULL-SHA \ " G_CIPHERS="$G_CIPHERS \ +ECDHE-RSA:+AES-128-CBC:+SHA1 \ +ECDHE-RSA:+AES-256-CBC:+SHA1 \ +ECDHE-RSA:+3DES-CBC:+SHA1 \ +ECDHE-RSA:+ARCFOUR-128:+SHA1 \ +ECDHE-RSA:+NULL:+SHA1 \ " O_CIPHERS="$O_CIPHERS \ ECDHE-RSA-AES256-SHA \ ECDHE-RSA-AES128-SHA \ ECDHE-RSA-DES-CBC3-SHA \ ECDHE-RSA-RC4-SHA \ ECDHE-RSA-NULL-SHA \ " fi if [ `minor_ver "$MODE"` -ge 3 ] then M_CIPHERS="$M_CIPHERS \ TLS-RSA-WITH-AES-128-CBC-SHA256 \ TLS-DHE-RSA-WITH-AES-128-CBC-SHA256 \ TLS-RSA-WITH-AES-256-CBC-SHA256 \ TLS-DHE-RSA-WITH-AES-256-CBC-SHA256 \ TLS-ECDHE-RSA-WITH-AES-128-CBC-SHA256 \ TLS-ECDHE-RSA-WITH-AES-256-CBC-SHA384 \ TLS-RSA-WITH-AES-128-GCM-SHA256 \ TLS-RSA-WITH-AES-256-GCM-SHA384 \ TLS-DHE-RSA-WITH-AES-128-GCM-SHA256 \ TLS-DHE-RSA-WITH-AES-256-GCM-SHA384 \ TLS-ECDHE-RSA-WITH-AES-128-GCM-SHA256 \ TLS-ECDHE-RSA-WITH-AES-256-GCM-SHA384 \ " G_CIPHERS="$G_CIPHERS \ +RSA:+AES-128-CBC:+SHA256 \ +DHE-RSA:+AES-128-CBC:+SHA256 \ +RSA:+AES-256-CBC:+SHA256 \ +DHE-RSA:+AES-256-CBC:+SHA256 \ +ECDHE-RSA:+AES-128-CBC:+SHA256 \ +ECDHE-RSA:+AES-256-CBC:+SHA384 \ +RSA:+AES-128-GCM:+AEAD \ +RSA:+AES-256-GCM:+AEAD \ +DHE-RSA:+AES-128-GCM:+AEAD \ +DHE-RSA:+AES-256-GCM:+AEAD \ +ECDHE-RSA:+AES-128-GCM:+AEAD \ +ECDHE-RSA:+AES-256-GCM:+AEAD \ " O_CIPHERS="$O_CIPHERS \ NULL-SHA256 \ AES128-SHA256 \ DHE-RSA-AES128-SHA256 \ AES256-SHA256 \ DHE-RSA-AES256-SHA256 \ ECDHE-RSA-AES128-SHA256 \ ECDHE-RSA-AES256-SHA384 \ AES128-GCM-SHA256 \ DHE-RSA-AES128-GCM-SHA256 \ AES256-GCM-SHA384 \ DHE-RSA-AES256-GCM-SHA384 \ ECDHE-RSA-AES128-GCM-SHA256 \ ECDHE-RSA-AES256-GCM-SHA384 \ " fi ;; "PSK") M_CIPHERS="$M_CIPHERS \ TLS-PSK-WITH-RC4-128-SHA \ TLS-PSK-WITH-3DES-EDE-CBC-SHA \ TLS-PSK-WITH-AES-128-CBC-SHA \ TLS-PSK-WITH-AES-256-CBC-SHA \ " G_CIPHERS="$G_CIPHERS \ +PSK:+ARCFOUR-128:+SHA1 \ +PSK:+3DES-CBC:+SHA1 \ +PSK:+AES-128-CBC:+SHA1 \ +PSK:+AES-256-CBC:+SHA1 \ " O_CIPHERS="$O_CIPHERS \ PSK-RC4-SHA \ PSK-3DES-EDE-CBC-SHA \ PSK-AES128-CBC-SHA \ PSK-AES256-CBC-SHA \ " ;; esac } # Ciphersuites usable only with Mbed TLS and OpenSSL # Each ciphersuite should appear two times, once with its OpenSSL name, once # with its Mbed TLS name. # # NOTE: for some reason RSA-PSK doesn't work with OpenSSL, # so RSA-PSK ciphersuites need to go in other sections, see # https://github.com/ARMmbed/mbedtls/issues/1419 # # ChachaPoly suites are here rather than in "common", as they were added in # GnuTLS in 3.5.0 and the CI only has 3.4.x so far. add_openssl_ciphersuites() { case $TYPE in "ECDSA") if [ `minor_ver "$MODE"` -gt 0 ] then M_CIPHERS="$M_CIPHERS \ TLS-ECDH-ECDSA-WITH-NULL-SHA \ TLS-ECDH-ECDSA-WITH-RC4-128-SHA \ TLS-ECDH-ECDSA-WITH-3DES-EDE-CBC-SHA \ TLS-ECDH-ECDSA-WITH-AES-128-CBC-SHA \ TLS-ECDH-ECDSA-WITH-AES-256-CBC-SHA \ " O_CIPHERS="$O_CIPHERS \ ECDH-ECDSA-NULL-SHA \ ECDH-ECDSA-RC4-SHA \ ECDH-ECDSA-DES-CBC3-SHA \ ECDH-ECDSA-AES128-SHA \ ECDH-ECDSA-AES256-SHA \ " fi if [ `minor_ver "$MODE"` -ge 3 ] then M_CIPHERS="$M_CIPHERS \ TLS-ECDH-ECDSA-WITH-AES-128-CBC-SHA256 \ TLS-ECDH-ECDSA-WITH-AES-256-CBC-SHA384 \ TLS-ECDH-ECDSA-WITH-AES-128-GCM-SHA256 \ TLS-ECDH-ECDSA-WITH-AES-256-GCM-SHA384 \ TLS-ECDHE-ECDSA-WITH-ARIA-256-GCM-SHA384 \ TLS-ECDHE-ECDSA-WITH-ARIA-128-GCM-SHA256 \ TLS-ECDHE-ECDSA-WITH-CHACHA20-POLY1305-SHA256 \ " O_CIPHERS="$O_CIPHERS \ ECDH-ECDSA-AES128-SHA256 \ ECDH-ECDSA-AES256-SHA384 \ ECDH-ECDSA-AES128-GCM-SHA256 \ ECDH-ECDSA-AES256-GCM-SHA384 \ ECDHE-ECDSA-ARIA256-GCM-SHA384 \ ECDHE-ECDSA-ARIA128-GCM-SHA256 \ ECDHE-ECDSA-CHACHA20-POLY1305 \ " fi ;; "RSA") M_CIPHERS="$M_CIPHERS \ TLS-RSA-WITH-DES-CBC-SHA \ TLS-DHE-RSA-WITH-DES-CBC-SHA \ " O_CIPHERS="$O_CIPHERS \ DES-CBC-SHA \ EDH-RSA-DES-CBC-SHA \ " if [ `minor_ver "$MODE"` -ge 3 ] then M_CIPHERS="$M_CIPHERS \ TLS-ECDHE-RSA-WITH-ARIA-256-GCM-SHA384 \ TLS-DHE-RSA-WITH-ARIA-256-GCM-SHA384 \ TLS-RSA-WITH-ARIA-256-GCM-SHA384 \ TLS-ECDHE-RSA-WITH-ARIA-128-GCM-SHA256 \ TLS-DHE-RSA-WITH-ARIA-128-GCM-SHA256 \ TLS-RSA-WITH-ARIA-128-GCM-SHA256 \ TLS-DHE-RSA-WITH-CHACHA20-POLY1305-SHA256 \ TLS-ECDHE-RSA-WITH-CHACHA20-POLY1305-SHA256 \ " O_CIPHERS="$O_CIPHERS \ ECDHE-ARIA256-GCM-SHA384 \ DHE-RSA-ARIA256-GCM-SHA384 \ ARIA256-GCM-SHA384 \ ECDHE-ARIA128-GCM-SHA256 \ DHE-RSA-ARIA128-GCM-SHA256 \ ARIA128-GCM-SHA256 \ DHE-RSA-CHACHA20-POLY1305 \ ECDHE-RSA-CHACHA20-POLY1305 \ " fi ;; "PSK") if [ `minor_ver "$MODE"` -ge 3 ] then M_CIPHERS="$M_CIPHERS \ TLS-DHE-PSK-WITH-ARIA-256-GCM-SHA384 \ TLS-DHE-PSK-WITH-ARIA-128-GCM-SHA256 \ TLS-PSK-WITH-ARIA-256-GCM-SHA384 \ TLS-PSK-WITH-ARIA-128-GCM-SHA256 \ TLS-PSK-WITH-CHACHA20-POLY1305-SHA256 \ TLS-ECDHE-PSK-WITH-CHACHA20-POLY1305-SHA256 \ TLS-DHE-PSK-WITH-CHACHA20-POLY1305-SHA256 \ " O_CIPHERS="$O_CIPHERS \ DHE-PSK-ARIA256-GCM-SHA384 \ DHE-PSK-ARIA128-GCM-SHA256 \ PSK-ARIA256-GCM-SHA384 \ PSK-ARIA128-GCM-SHA256 \ DHE-PSK-CHACHA20-POLY1305 \ ECDHE-PSK-CHACHA20-POLY1305 \ PSK-CHACHA20-POLY1305 \ " fi ;; esac } # Ciphersuites usable only with Mbed TLS and GnuTLS # Each ciphersuite should appear two times, once with its GnuTLS name, once # with its Mbed TLS name. add_gnutls_ciphersuites() { case $TYPE in "ECDSA") if [ `minor_ver "$MODE"` -ge 3 ] then M_CIPHERS="$M_CIPHERS \ TLS-ECDHE-ECDSA-WITH-CAMELLIA-128-CBC-SHA256 \ TLS-ECDHE-ECDSA-WITH-CAMELLIA-256-CBC-SHA384 \ TLS-ECDHE-ECDSA-WITH-CAMELLIA-128-GCM-SHA256 \ TLS-ECDHE-ECDSA-WITH-CAMELLIA-256-GCM-SHA384 \ TLS-ECDHE-ECDSA-WITH-AES-128-CCM \ TLS-ECDHE-ECDSA-WITH-AES-256-CCM \ TLS-ECDHE-ECDSA-WITH-AES-128-CCM-8 \ TLS-ECDHE-ECDSA-WITH-AES-256-CCM-8 \ " G_CIPHERS="$G_CIPHERS \ +ECDHE-ECDSA:+CAMELLIA-128-CBC:+SHA256 \ +ECDHE-ECDSA:+CAMELLIA-256-CBC:+SHA384 \ +ECDHE-ECDSA:+CAMELLIA-128-GCM:+AEAD \ +ECDHE-ECDSA:+CAMELLIA-256-GCM:+AEAD \ +ECDHE-ECDSA:+AES-128-CCM:+AEAD \ +ECDHE-ECDSA:+AES-256-CCM:+AEAD \ +ECDHE-ECDSA:+AES-128-CCM-8:+AEAD \ +ECDHE-ECDSA:+AES-256-CCM-8:+AEAD \ " fi ;; "RSA") if [ `minor_ver "$MODE"` -gt 0 ] then M_CIPHERS="$M_CIPHERS \ TLS-RSA-WITH-NULL-SHA256 \ " G_CIPHERS="$G_CIPHERS \ +RSA:+NULL:+SHA256 \ " fi if [ `minor_ver "$MODE"` -ge 3 ] then M_CIPHERS="$M_CIPHERS \ TLS-ECDHE-RSA-WITH-CAMELLIA-128-CBC-SHA256 \ TLS-ECDHE-RSA-WITH-CAMELLIA-256-CBC-SHA384 \ TLS-RSA-WITH-CAMELLIA-128-CBC-SHA256 \ TLS-RSA-WITH-CAMELLIA-256-CBC-SHA256 \ TLS-DHE-RSA-WITH-CAMELLIA-128-CBC-SHA256 \ TLS-DHE-RSA-WITH-CAMELLIA-256-CBC-SHA256 \ TLS-ECDHE-RSA-WITH-CAMELLIA-128-GCM-SHA256 \ TLS-ECDHE-RSA-WITH-CAMELLIA-256-GCM-SHA384 \ TLS-DHE-RSA-WITH-CAMELLIA-128-GCM-SHA256 \ TLS-DHE-RSA-WITH-CAMELLIA-256-GCM-SHA384 \ TLS-RSA-WITH-CAMELLIA-128-GCM-SHA256 \ TLS-RSA-WITH-CAMELLIA-256-GCM-SHA384 \ TLS-RSA-WITH-AES-128-CCM \ TLS-RSA-WITH-AES-256-CCM \ TLS-DHE-RSA-WITH-AES-128-CCM \ TLS-DHE-RSA-WITH-AES-256-CCM \ TLS-RSA-WITH-AES-128-CCM-8 \ TLS-RSA-WITH-AES-256-CCM-8 \ TLS-DHE-RSA-WITH-AES-128-CCM-8 \ TLS-DHE-RSA-WITH-AES-256-CCM-8 \ " G_CIPHERS="$G_CIPHERS \ +ECDHE-RSA:+CAMELLIA-128-CBC:+SHA256 \ +ECDHE-RSA:+CAMELLIA-256-CBC:+SHA384 \ +RSA:+CAMELLIA-128-CBC:+SHA256 \ +RSA:+CAMELLIA-256-CBC:+SHA256 \ +DHE-RSA:+CAMELLIA-128-CBC:+SHA256 \ +DHE-RSA:+CAMELLIA-256-CBC:+SHA256 \ +ECDHE-RSA:+CAMELLIA-128-GCM:+AEAD \ +ECDHE-RSA:+CAMELLIA-256-GCM:+AEAD \ +DHE-RSA:+CAMELLIA-128-GCM:+AEAD \ +DHE-RSA:+CAMELLIA-256-GCM:+AEAD \ +RSA:+CAMELLIA-128-GCM:+AEAD \ +RSA:+CAMELLIA-256-GCM:+AEAD \ +RSA:+AES-128-CCM:+AEAD \ +RSA:+AES-256-CCM:+AEAD \ +RSA:+AES-128-CCM-8:+AEAD \ +RSA:+AES-256-CCM-8:+AEAD \ +DHE-RSA:+AES-128-CCM:+AEAD \ +DHE-RSA:+AES-256-CCM:+AEAD \ +DHE-RSA:+AES-128-CCM-8:+AEAD \ +DHE-RSA:+AES-256-CCM-8:+AEAD \ " fi ;; "PSK") M_CIPHERS="$M_CIPHERS \ TLS-DHE-PSK-WITH-3DES-EDE-CBC-SHA \ TLS-DHE-PSK-WITH-AES-128-CBC-SHA \ TLS-DHE-PSK-WITH-AES-256-CBC-SHA \ TLS-DHE-PSK-WITH-RC4-128-SHA \ " G_CIPHERS="$G_CIPHERS \ +DHE-PSK:+3DES-CBC:+SHA1 \ +DHE-PSK:+AES-128-CBC:+SHA1 \ +DHE-PSK:+AES-256-CBC:+SHA1 \ +DHE-PSK:+ARCFOUR-128:+SHA1 \ " if [ `minor_ver "$MODE"` -gt 0 ] then M_CIPHERS="$M_CIPHERS \ TLS-ECDHE-PSK-WITH-AES-256-CBC-SHA \ TLS-ECDHE-PSK-WITH-AES-128-CBC-SHA \ TLS-ECDHE-PSK-WITH-3DES-EDE-CBC-SHA \ TLS-ECDHE-PSK-WITH-RC4-128-SHA \ TLS-RSA-PSK-WITH-3DES-EDE-CBC-SHA \ TLS-RSA-PSK-WITH-AES-256-CBC-SHA \ TLS-RSA-PSK-WITH-AES-128-CBC-SHA \ TLS-RSA-PSK-WITH-RC4-128-SHA \ " G_CIPHERS="$G_CIPHERS \ +ECDHE-PSK:+3DES-CBC:+SHA1 \ +ECDHE-PSK:+AES-128-CBC:+SHA1 \ +ECDHE-PSK:+AES-256-CBC:+SHA1 \ +ECDHE-PSK:+ARCFOUR-128:+SHA1 \ +RSA-PSK:+3DES-CBC:+SHA1 \ +RSA-PSK:+AES-256-CBC:+SHA1 \ +RSA-PSK:+AES-128-CBC:+SHA1 \ +RSA-PSK:+ARCFOUR-128:+SHA1 \ " fi if [ `minor_ver "$MODE"` -ge 3 ] then M_CIPHERS="$M_CIPHERS \ TLS-ECDHE-PSK-WITH-AES-256-CBC-SHA384 \ TLS-ECDHE-PSK-WITH-CAMELLIA-256-CBC-SHA384 \ TLS-ECDHE-PSK-WITH-AES-128-CBC-SHA256 \ TLS-ECDHE-PSK-WITH-CAMELLIA-128-CBC-SHA256 \ TLS-ECDHE-PSK-WITH-NULL-SHA384 \ TLS-ECDHE-PSK-WITH-NULL-SHA256 \ TLS-PSK-WITH-AES-128-CBC-SHA256 \ TLS-PSK-WITH-AES-256-CBC-SHA384 \ TLS-DHE-PSK-WITH-AES-128-CBC-SHA256 \ TLS-DHE-PSK-WITH-AES-256-CBC-SHA384 \ TLS-PSK-WITH-NULL-SHA256 \ TLS-PSK-WITH-NULL-SHA384 \ TLS-DHE-PSK-WITH-NULL-SHA256 \ TLS-DHE-PSK-WITH-NULL-SHA384 \ TLS-RSA-PSK-WITH-AES-256-CBC-SHA384 \ TLS-RSA-PSK-WITH-AES-128-CBC-SHA256 \ TLS-RSA-PSK-WITH-NULL-SHA256 \ TLS-RSA-PSK-WITH-NULL-SHA384 \ TLS-DHE-PSK-WITH-CAMELLIA-128-CBC-SHA256 \ TLS-DHE-PSK-WITH-CAMELLIA-256-CBC-SHA384 \ TLS-PSK-WITH-CAMELLIA-128-CBC-SHA256 \ TLS-PSK-WITH-CAMELLIA-256-CBC-SHA384 \ TLS-RSA-PSK-WITH-CAMELLIA-256-CBC-SHA384 \ TLS-RSA-PSK-WITH-CAMELLIA-128-CBC-SHA256 \ TLS-PSK-WITH-AES-128-GCM-SHA256 \ TLS-PSK-WITH-AES-256-GCM-SHA384 \ TLS-DHE-PSK-WITH-AES-128-GCM-SHA256 \ TLS-DHE-PSK-WITH-AES-256-GCM-SHA384 \ TLS-PSK-WITH-AES-128-CCM \ TLS-PSK-WITH-AES-256-CCM \ TLS-DHE-PSK-WITH-AES-128-CCM \ TLS-DHE-PSK-WITH-AES-256-CCM \ TLS-PSK-WITH-AES-128-CCM-8 \ TLS-PSK-WITH-AES-256-CCM-8 \ TLS-DHE-PSK-WITH-AES-128-CCM-8 \ TLS-DHE-PSK-WITH-AES-256-CCM-8 \ TLS-RSA-PSK-WITH-CAMELLIA-128-GCM-SHA256 \ TLS-RSA-PSK-WITH-CAMELLIA-256-GCM-SHA384 \ TLS-PSK-WITH-CAMELLIA-128-GCM-SHA256 \ TLS-PSK-WITH-CAMELLIA-256-GCM-SHA384 \ TLS-DHE-PSK-WITH-CAMELLIA-128-GCM-SHA256 \ TLS-DHE-PSK-WITH-CAMELLIA-256-GCM-SHA384 \ TLS-RSA-PSK-WITH-AES-256-GCM-SHA384 \ TLS-RSA-PSK-WITH-AES-128-GCM-SHA256 \ " G_CIPHERS="$G_CIPHERS \ +ECDHE-PSK:+AES-256-CBC:+SHA384 \ +ECDHE-PSK:+CAMELLIA-256-CBC:+SHA384 \ +ECDHE-PSK:+AES-128-CBC:+SHA256 \ +ECDHE-PSK:+CAMELLIA-128-CBC:+SHA256 \ +PSK:+AES-128-CBC:+SHA256 \ +PSK:+AES-256-CBC:+SHA384 \ +DHE-PSK:+AES-128-CBC:+SHA256 \ +DHE-PSK:+AES-256-CBC:+SHA384 \ +RSA-PSK:+AES-256-CBC:+SHA384 \ +RSA-PSK:+AES-128-CBC:+SHA256 \ +DHE-PSK:+CAMELLIA-128-CBC:+SHA256 \ +DHE-PSK:+CAMELLIA-256-CBC:+SHA384 \ +PSK:+CAMELLIA-128-CBC:+SHA256 \ +PSK:+CAMELLIA-256-CBC:+SHA384 \ +RSA-PSK:+CAMELLIA-256-CBC:+SHA384 \ +RSA-PSK:+CAMELLIA-128-CBC:+SHA256 \ +PSK:+AES-128-GCM:+AEAD \ +PSK:+AES-256-GCM:+AEAD \ +DHE-PSK:+AES-128-GCM:+AEAD \ +DHE-PSK:+AES-256-GCM:+AEAD \ +PSK:+AES-128-CCM:+AEAD \ +PSK:+AES-256-CCM:+AEAD \ +DHE-PSK:+AES-128-CCM:+AEAD \ +DHE-PSK:+AES-256-CCM:+AEAD \ +PSK:+AES-128-CCM-8:+AEAD \ +PSK:+AES-256-CCM-8:+AEAD \ +DHE-PSK:+AES-128-CCM-8:+AEAD \ +DHE-PSK:+AES-256-CCM-8:+AEAD \ +RSA-PSK:+CAMELLIA-128-GCM:+AEAD \ +RSA-PSK:+CAMELLIA-256-GCM:+AEAD \ +PSK:+CAMELLIA-128-GCM:+AEAD \ +PSK:+CAMELLIA-256-GCM:+AEAD \ +DHE-PSK:+CAMELLIA-128-GCM:+AEAD \ +DHE-PSK:+CAMELLIA-256-GCM:+AEAD \ +RSA-PSK:+AES-256-GCM:+AEAD \ +RSA-PSK:+AES-128-GCM:+AEAD \ +ECDHE-PSK:+NULL:+SHA384 \ +ECDHE-PSK:+NULL:+SHA256 \ +PSK:+NULL:+SHA256 \ +PSK:+NULL:+SHA384 \ +DHE-PSK:+NULL:+SHA256 \ +DHE-PSK:+NULL:+SHA384 \ +RSA-PSK:+NULL:+SHA256 \ +RSA-PSK:+NULL:+SHA384 \ " fi ;; esac } # Ciphersuites usable only with Mbed TLS (not currently supported by another # peer usable in this script). This provide only very rudimentaty testing, as # this is not interop testing, but it's better than nothing. add_mbedtls_ciphersuites() { case $TYPE in "ECDSA") if [ `minor_ver "$MODE"` -gt 0 ] then M_CIPHERS="$M_CIPHERS \ TLS-ECDH-ECDSA-WITH-CAMELLIA-128-CBC-SHA256 \ TLS-ECDH-ECDSA-WITH-CAMELLIA-256-CBC-SHA384 \ " fi if [ `minor_ver "$MODE"` -ge 3 ] then M_CIPHERS="$M_CIPHERS \ TLS-ECDH-ECDSA-WITH-CAMELLIA-128-GCM-SHA256 \ TLS-ECDH-ECDSA-WITH-CAMELLIA-256-GCM-SHA384 \ TLS-ECDHE-ECDSA-WITH-ARIA-256-CBC-SHA384 \ TLS-ECDHE-ECDSA-WITH-ARIA-128-CBC-SHA256 \ TLS-ECDH-ECDSA-WITH-ARIA-256-GCM-SHA384 \ TLS-ECDH-ECDSA-WITH-ARIA-128-GCM-SHA256 \ TLS-ECDH-ECDSA-WITH-ARIA-256-CBC-SHA384 \ TLS-ECDH-ECDSA-WITH-ARIA-128-CBC-SHA256 \ " fi ;; "RSA") if [ `minor_ver "$MODE"` -ge 3 ] then M_CIPHERS="$M_CIPHERS \ TLS-ECDHE-RSA-WITH-ARIA-256-CBC-SHA384 \ TLS-DHE-RSA-WITH-ARIA-256-CBC-SHA384 \ TLS-ECDHE-RSA-WITH-ARIA-128-CBC-SHA256 \ TLS-DHE-RSA-WITH-ARIA-128-CBC-SHA256 \ TLS-RSA-WITH-ARIA-256-CBC-SHA384 \ TLS-RSA-WITH-ARIA-128-CBC-SHA256 \ " fi ;; "PSK") # *PSK-NULL-SHA suites supported by GnuTLS 3.3.5 but not 3.2.15 M_CIPHERS="$M_CIPHERS \ TLS-PSK-WITH-NULL-SHA \ TLS-DHE-PSK-WITH-NULL-SHA \ " if [ `minor_ver "$MODE"` -gt 0 ] then M_CIPHERS="$M_CIPHERS \ TLS-ECDHE-PSK-WITH-NULL-SHA \ TLS-RSA-PSK-WITH-NULL-SHA \ " fi if [ `minor_ver "$MODE"` -ge 3 ] then M_CIPHERS="$M_CIPHERS \ TLS-RSA-PSK-WITH-ARIA-256-CBC-SHA384 \ TLS-RSA-PSK-WITH-ARIA-128-CBC-SHA256 \ TLS-PSK-WITH-ARIA-256-CBC-SHA384 \ TLS-PSK-WITH-ARIA-128-CBC-SHA256 \ TLS-RSA-PSK-WITH-ARIA-256-GCM-SHA384 \ TLS-RSA-PSK-WITH-ARIA-128-GCM-SHA256 \ TLS-ECDHE-PSK-WITH-ARIA-256-CBC-SHA384 \ TLS-ECDHE-PSK-WITH-ARIA-128-CBC-SHA256 \ TLS-DHE-PSK-WITH-ARIA-256-CBC-SHA384 \ TLS-DHE-PSK-WITH-ARIA-128-CBC-SHA256 \ TLS-RSA-PSK-WITH-CHACHA20-POLY1305-SHA256 \ " fi ;; esac } setup_arguments() { G_MODE="" case "$MODE" in "ssl3") G_PRIO_MODE="+VERS-SSL3.0" ;; "tls1") G_PRIO_MODE="+VERS-TLS1.0" ;; "tls1_1") G_PRIO_MODE="+VERS-TLS1.1" ;; "tls1_2") G_PRIO_MODE="+VERS-TLS1.2" ;; "dtls1") G_PRIO_MODE="+VERS-DTLS1.0" G_MODE="-u" ;; "dtls1_2") G_PRIO_MODE="+VERS-DTLS1.2" G_MODE="-u" ;; *) echo "error: invalid mode: $MODE" >&2 exit 1; esac # GnuTLS < 3.4 will choke if we try to allow CCM-8 if [ -z "${GNUTLS_MINOR_LT_FOUR-}" ]; then G_PRIO_CCM="+AES-256-CCM-8:+AES-128-CCM-8:" else G_PRIO_CCM="" fi M_SERVER_ARGS="server_port=$PORT server_addr=0.0.0.0 force_version=$MODE arc4=1" O_SERVER_ARGS="-accept $PORT -cipher NULL,ALL -$MODE -dhparam data_files/dhparams.pem" G_SERVER_ARGS="-p $PORT --http $G_MODE" G_SERVER_PRIO="NORMAL:${G_PRIO_CCM}+ARCFOUR-128:+NULL:+MD5:+PSK:+DHE-PSK:+ECDHE-PSK:+RSA-PSK:-VERS-TLS-ALL:$G_PRIO_MODE" # with OpenSSL 1.0.1h, -www, -WWW and -HTTP break DTLS handshakes if is_dtls "$MODE"; then O_SERVER_ARGS="$O_SERVER_ARGS" else O_SERVER_ARGS="$O_SERVER_ARGS -www" fi M_CLIENT_ARGS="server_port=$PORT server_addr=127.0.0.1 force_version=$MODE" O_CLIENT_ARGS="-connect localhost:$PORT -$MODE" G_CLIENT_ARGS="-p $PORT --debug 3 $G_MODE" G_CLIENT_PRIO="NONE:$G_PRIO_MODE:+COMP-NULL:+CURVE-ALL:+SIGN-ALL" if [ "X$VERIFY" = "XYES" ]; then M_SERVER_ARGS="$M_SERVER_ARGS ca_file=data_files/test-ca_cat12.crt auth_mode=required" O_SERVER_ARGS="$O_SERVER_ARGS -CAfile data_files/test-ca_cat12.crt -Verify 10" G_SERVER_ARGS="$G_SERVER_ARGS --x509cafile data_files/test-ca_cat12.crt --require-client-cert" M_CLIENT_ARGS="$M_CLIENT_ARGS ca_file=data_files/test-ca_cat12.crt auth_mode=required" O_CLIENT_ARGS="$O_CLIENT_ARGS -CAfile data_files/test-ca_cat12.crt -verify 10" G_CLIENT_ARGS="$G_CLIENT_ARGS --x509cafile data_files/test-ca_cat12.crt" else # don't request a client cert at all M_SERVER_ARGS="$M_SERVER_ARGS ca_file=none auth_mode=none" G_SERVER_ARGS="$G_SERVER_ARGS --disable-client-cert" M_CLIENT_ARGS="$M_CLIENT_ARGS ca_file=none auth_mode=none" O_CLIENT_ARGS="$O_CLIENT_ARGS" G_CLIENT_ARGS="$G_CLIENT_ARGS --insecure" fi case $TYPE in "ECDSA") M_SERVER_ARGS="$M_SERVER_ARGS crt_file=data_files/server5.crt key_file=data_files/server5.key" O_SERVER_ARGS="$O_SERVER_ARGS -cert data_files/server5.crt -key data_files/server5.key" G_SERVER_ARGS="$G_SERVER_ARGS --x509certfile data_files/server5.crt --x509keyfile data_files/server5.key" if [ "X$VERIFY" = "XYES" ]; then M_CLIENT_ARGS="$M_CLIENT_ARGS crt_file=data_files/server6.crt key_file=data_files/server6.key" O_CLIENT_ARGS="$O_CLIENT_ARGS -cert data_files/server6.crt -key data_files/server6.key" G_CLIENT_ARGS="$G_CLIENT_ARGS --x509certfile data_files/server6.crt --x509keyfile data_files/server6.key" else M_CLIENT_ARGS="$M_CLIENT_ARGS crt_file=none key_file=none" fi ;; "RSA") M_SERVER_ARGS="$M_SERVER_ARGS crt_file=data_files/server2.crt key_file=data_files/server2.key" O_SERVER_ARGS="$O_SERVER_ARGS -cert data_files/server2.crt -key data_files/server2.key" G_SERVER_ARGS="$G_SERVER_ARGS --x509certfile data_files/server2.crt --x509keyfile data_files/server2.key" if [ "X$VERIFY" = "XYES" ]; then M_CLIENT_ARGS="$M_CLIENT_ARGS crt_file=data_files/server1.crt key_file=data_files/server1.key" O_CLIENT_ARGS="$O_CLIENT_ARGS -cert data_files/server1.crt -key data_files/server1.key" G_CLIENT_ARGS="$G_CLIENT_ARGS --x509certfile data_files/server1.crt --x509keyfile data_files/server1.key" else M_CLIENT_ARGS="$M_CLIENT_ARGS crt_file=none key_file=none" fi # Allow SHA-1. It's disabled by default for security reasons but # our tests still use certificates signed with it. M_SERVER_ARGS="$M_SERVER_ARGS allow_sha1=1" M_CLIENT_ARGS="$M_CLIENT_ARGS allow_sha1=1" ;; "PSK") # give RSA-PSK-capable server a RSA cert # (should be a separate type, but harder to close with openssl) M_SERVER_ARGS="$M_SERVER_ARGS psk=6162636465666768696a6b6c6d6e6f70 ca_file=none crt_file=data_files/server2.crt key_file=data_files/server2.key" O_SERVER_ARGS="$O_SERVER_ARGS -psk 6162636465666768696a6b6c6d6e6f70 -nocert" G_SERVER_ARGS="$G_SERVER_ARGS --x509certfile data_files/server2.crt --x509keyfile data_files/server2.key --pskpasswd data_files/passwd.psk" M_CLIENT_ARGS="$M_CLIENT_ARGS psk=6162636465666768696a6b6c6d6e6f70 crt_file=none key_file=none" O_CLIENT_ARGS="$O_CLIENT_ARGS -psk 6162636465666768696a6b6c6d6e6f70" G_CLIENT_ARGS="$G_CLIENT_ARGS --pskusername Client_identity --pskkey=6162636465666768696a6b6c6d6e6f70" # Allow SHA-1. It's disabled by default for security reasons but # our tests still use certificates signed with it. M_SERVER_ARGS="$M_SERVER_ARGS allow_sha1=1" M_CLIENT_ARGS="$M_CLIENT_ARGS allow_sha1=1" ;; esac } # is_mbedtls is_mbedtls() { echo "$1" | grep 'ssl_server2\|ssl_client2' > /dev/null } # has_mem_err has_mem_err() { if ( grep -F 'All heap blocks were freed -- no leaks are possible' "$1" && grep -F 'ERROR SUMMARY: 0 errors from 0 contexts' "$1" ) > /dev/null then return 1 # false: does not have errors else return 0 # true: has errors fi } # Wait for process $2 to be listening on port $1 if type lsof >/dev/null 2>/dev/null; then wait_server_start() { START_TIME=$(date +%s) if is_dtls "$MODE"; then proto=UDP else proto=TCP fi while ! lsof -a -n -b -i "$proto:$1" -p "$2" >/dev/null 2>/dev/null; do if [ $(( $(date +%s) - $START_TIME )) -gt $DOG_DELAY ]; then echo "SERVERSTART TIMEOUT" echo "SERVERSTART TIMEOUT" >> $SRV_OUT break fi # Linux and *BSD support decimal arguments to sleep. On other # OSes this may be a tight loop. sleep 0.1 2>/dev/null || true done } else echo "Warning: lsof not available, wait_server_start = sleep" wait_server_start() { sleep 2 } fi # start_server # also saves name and command start_server() { case $1 in [Oo]pen*) SERVER_CMD="$OPENSSL_CMD s_server $O_SERVER_ARGS" ;; [Gg]nu*) SERVER_CMD="$GNUTLS_SERV $G_SERVER_ARGS --priority $G_SERVER_PRIO" ;; mbed*) SERVER_CMD="$M_SRV $M_SERVER_ARGS" if [ "$MEMCHECK" -gt 0 ]; then SERVER_CMD="valgrind --leak-check=full $SERVER_CMD" fi ;; *) echo "error: invalid server name: $1" >&2 exit 1 ;; esac SERVER_NAME=$1 log "$SERVER_CMD" echo "$SERVER_CMD" > $SRV_OUT # for servers without -www or equivalent while :; do echo bla; sleep 1; done | $SERVER_CMD >> $SRV_OUT 2>&1 & PROCESS_ID=$! wait_server_start "$PORT" "$PROCESS_ID" } # terminate the running server stop_server() { kill $PROCESS_ID 2>/dev/null wait $PROCESS_ID 2>/dev/null if [ "$MEMCHECK" -gt 0 ]; then if is_mbedtls "$SERVER_CMD" && has_mem_err $SRV_OUT; then echo " ! Server had memory errors" SRVMEM=$(( $SRVMEM + 1 )) return fi fi rm -f $SRV_OUT } # kill the running server (used when killed by signal) cleanup() { rm -f $SRV_OUT $CLI_OUT kill $PROCESS_ID >/dev/null 2>&1 kill $WATCHDOG_PID >/dev/null 2>&1 exit 1 } # wait for client to terminate and set EXIT # must be called right after starting the client wait_client_done() { CLI_PID=$! ( sleep "$DOG_DELAY"; echo "TIMEOUT" >> $CLI_OUT; kill $CLI_PID ) & WATCHDOG_PID=$! wait $CLI_PID EXIT=$? kill $WATCHDOG_PID wait $WATCHDOG_PID echo "EXIT: $EXIT" >> $CLI_OUT } # run_client run_client() { # announce what we're going to do TESTS=$(( $TESTS + 1 )) VERIF=$(echo $VERIFY | tr '[:upper:]' '[:lower:]') TITLE="`echo $1 | head -c1`->`echo $SERVER_NAME | head -c1`" TITLE="$TITLE $MODE,$VERIF $2" printf "$TITLE " LEN=$(( 72 - `echo "$TITLE" | wc -c` )) for i in `seq 1 $LEN`; do printf '.'; done; printf ' ' # should we skip? if [ "X$SKIP_NEXT" = "XYES" ]; then SKIP_NEXT="NO" echo "SKIP" SKIPPED=$(( $SKIPPED + 1 )) return fi # run the command and interpret result case $1 in [Oo]pen*) CLIENT_CMD="$OPENSSL_CMD s_client $O_CLIENT_ARGS -cipher $2" log "$CLIENT_CMD" echo "$CLIENT_CMD" > $CLI_OUT printf 'GET HTTP/1.0\r\n\r\n' | $CLIENT_CMD >> $CLI_OUT 2>&1 & wait_client_done if [ $EXIT -eq 0 ]; then RESULT=0 else # If the cipher isn't supported... if grep 'Cipher is (NONE)' $CLI_OUT >/dev/null; then RESULT=1 else RESULT=2 fi fi ;; [Gg]nu*) # need to force IPv4 with UDP, but keep localhost for auth if is_dtls "$MODE"; then G_HOST="127.0.0.1" else G_HOST="localhost" fi CLIENT_CMD="$GNUTLS_CLI $G_CLIENT_ARGS --priority $G_PRIO_MODE:$2 $G_HOST" log "$CLIENT_CMD" echo "$CLIENT_CMD" > $CLI_OUT printf 'GET HTTP/1.0\r\n\r\n' | $CLIENT_CMD >> $CLI_OUT 2>&1 & wait_client_done if [ $EXIT -eq 0 ]; then RESULT=0 else RESULT=2 # interpret early failure, with a handshake_failure alert # before the server hello, as "no ciphersuite in common" if grep -F 'Received alert [40]: Handshake failed' $CLI_OUT; then if grep -i 'SERVER HELLO .* was received' $CLI_OUT; then : else RESULT=1 fi fi >/dev/null fi ;; mbed*) CLIENT_CMD="$M_CLI $M_CLIENT_ARGS force_ciphersuite=$2" if [ "$MEMCHECK" -gt 0 ]; then CLIENT_CMD="valgrind --leak-check=full $CLIENT_CMD" fi log "$CLIENT_CMD" echo "$CLIENT_CMD" > $CLI_OUT $CLIENT_CMD >> $CLI_OUT 2>&1 & wait_client_done case $EXIT in # Success "0") RESULT=0 ;; # Ciphersuite not supported "2") RESULT=1 ;; # Error *) RESULT=2 ;; esac if [ "$MEMCHECK" -gt 0 ]; then if is_mbedtls "$CLIENT_CMD" && has_mem_err $CLI_OUT; then RESULT=2 fi fi ;; *) echo "error: invalid client name: $1" >&2 exit 1 ;; esac echo "EXIT: $EXIT" >> $CLI_OUT # report and count result case $RESULT in "0") echo PASS ;; "1") echo SKIP SKIPPED=$(( $SKIPPED + 1 )) ;; "2") echo FAIL cp $SRV_OUT c-srv-${TESTS}.log cp $CLI_OUT c-cli-${TESTS}.log echo " ! outputs saved to c-srv-${TESTS}.log, c-cli-${TESTS}.log" if [ "X${USER:-}" = Xbuildbot -o "X${LOGNAME:-}" = Xbuildbot -o "${LOG_FAILURE_ON_STDOUT:-0}" != 0 ]; then echo " ! server output:" cat c-srv-${TESTS}.log echo " ! ===================================================" echo " ! client output:" cat c-cli-${TESTS}.log fi FAILED=$(( $FAILED + 1 )) ;; esac rm -f $CLI_OUT } # # MAIN # if cd $( dirname $0 ); then :; else echo "cd $( dirname $0 ) failed" >&2 exit 1 fi get_options "$@" # sanity checks, avoid an avalanche of errors if [ ! -x "$M_SRV" ]; then echo "Command '$M_SRV' is not an executable file" >&2 exit 1 fi if [ ! -x "$M_CLI" ]; then echo "Command '$M_CLI' is not an executable file" >&2 exit 1 fi if echo "$PEERS" | grep -i openssl > /dev/null; then if which "$OPENSSL_CMD" >/dev/null 2>&1; then :; else echo "Command '$OPENSSL_CMD' not found" >&2 exit 1 fi fi if echo "$PEERS" | grep -i gnutls > /dev/null; then for CMD in "$GNUTLS_CLI" "$GNUTLS_SERV"; do if which "$CMD" >/dev/null 2>&1; then :; else echo "Command '$CMD' not found" >&2 exit 1 fi done fi for PEER in $PEERS; do case "$PEER" in mbed*|[Oo]pen*|[Gg]nu*) ;; *) echo "Unknown peers: $PEER" >&2 exit 1 esac done # Pick a "unique" port in the range 10000-19999. PORT="0000$$" PORT="1$(echo $PORT | tail -c 5)" # Also pick a unique name for intermediate files SRV_OUT="srv_out.$$" CLI_OUT="cli_out.$$" # client timeout delay: be more patient with valgrind if [ "$MEMCHECK" -gt 0 ]; then DOG_DELAY=30 else DOG_DELAY=10 fi SKIP_NEXT="NO" trap cleanup INT TERM HUP for VERIFY in $VERIFIES; do for MODE in $MODES; do for TYPE in $TYPES; do for PEER in $PEERS; do setup_arguments case "$PEER" in [Oo]pen*) if test "$OSSL_NO_DTLS" -gt 0 && is_dtls "$MODE"; then continue; fi reset_ciphersuites add_common_ciphersuites add_openssl_ciphersuites filter_ciphersuites if [ "X" != "X$M_CIPHERS" ]; then start_server "OpenSSL" for i in $M_CIPHERS; do check_openssl_server_bug $i run_client mbedTLS $i done stop_server fi if [ "X" != "X$O_CIPHERS" ]; then start_server "mbedTLS" for i in $O_CIPHERS; do run_client OpenSSL $i done stop_server fi ;; [Gg]nu*) reset_ciphersuites add_common_ciphersuites add_gnutls_ciphersuites filter_ciphersuites if [ "X" != "X$M_CIPHERS" ]; then start_server "GnuTLS" for i in $M_CIPHERS; do run_client mbedTLS $i done stop_server fi if [ "X" != "X$G_CIPHERS" ]; then start_server "mbedTLS" for i in $G_CIPHERS; do run_client GnuTLS $i done stop_server fi ;; mbed*) reset_ciphersuites add_common_ciphersuites add_openssl_ciphersuites add_gnutls_ciphersuites add_mbedtls_ciphersuites filter_ciphersuites if [ "X" != "X$M_CIPHERS" ]; then start_server "mbedTLS" for i in $M_CIPHERS; do run_client mbedTLS $i done stop_server fi ;; *) echo "Unknown peer: $PEER" >&2 exit 1 ;; esac done done done done echo "------------------------------------------------------------------------" if [ $FAILED -ne 0 -o $SRVMEM -ne 0 ]; then printf "FAILED" else printf "PASSED" fi if [ "$MEMCHECK" -gt 0 ]; then MEMREPORT=", $SRVMEM server memory errors" else MEMREPORT="" fi PASSED=$(( $TESTS - $FAILED )) echo " ($PASSED / $TESTS tests ($SKIPPED skipped$MEMREPORT))" FAILED=$(( $FAILED + $SRVMEM )) exit $FAILED