/** * \file config.h * * \brief Configuration options (set of defines) * * Copyright (C) 2006-2013, Brainspark B.V. * * This file is part of PolarSSL (http://www.polarssl.org) * Lead Maintainer: Paul Bakker * * All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License along * with this program; if not, write to the Free Software Foundation, Inc., * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. * * This set of compile-time options may be used to enable * or disable features selectively, and reduce the global * memory footprint. */ #ifndef POLARSSL_CONFIG_H #define POLARSSL_CONFIG_H #if defined(_MSC_VER) && !defined(_CRT_SECURE_NO_DEPRECATE) #define _CRT_SECURE_NO_DEPRECATE 1 #endif /** * \name SECTION: System support * * This section sets system specific settings. * \{ */ /** * \def POLARSSL_HAVE_INT8 * * The system uses 8-bit wide native integers. * * Uncomment if native integers are 8-bit wide. #define POLARSSL_HAVE_INT8 */ /** * \def POLARSSL_HAVE_INT16 * * The system uses 16-bit wide native integers. * * Uncomment if native integers are 16-bit wide. #define POLARSSL_HAVE_INT16 */ /** * \def POLARSSL_HAVE_LONGLONG * * The compiler supports the 'long long' type. * (Only used on 32-bit platforms) */ #define POLARSSL_HAVE_LONGLONG /** * \def POLARSSL_HAVE_ASM * * The compiler has support for asm() * * Uncomment to enable the use of assembly code. * * Requires support for asm() in compiler. * * Used in: * library/timing.c * library/padlock.c * include/polarssl/bn_mul.h * */ #define POLARSSL_HAVE_ASM /** * \def POLARSSL_HAVE_SSE2 * * CPU supports SSE2 instruction set. * * Uncomment if the CPU supports SSE2 (IA-32 specific). * #define POLARSSL_HAVE_SSE2 */ /** * \def POLARSSL_HAVE_TIME * * System has time.h and time() / localtime() / gettimeofday() * * Comment if your system does not support time functions */ #define POLARSSL_HAVE_TIME /* \} name */ /** * \name SECTION: PolarSSL feature support * * This section sets support for features that are or are not needed * within the modules that are enabled. * \{ */ /** * \def POLARSSL_XXX_ALT * * Uncomment a macro to let PolarSSL use your alternate core implementation of * a symmetric or hash algorithm (e.g. platform specific assembly optimized * implementations). Keep in mind that the function prototypes should remain * the same. * * Example: In case you uncomment POLARSSL_AES_ALT, PolarSSL will no longer * provide the "struct aes_context" definition and omit the base function * declarations and implementations. "aes_alt.h" will be included from * "aes.h" to include the new function definitions. * * Uncomment a macro to enable alternate implementation for core algorithm * functions #define POLARSSL_AES_ALT #define POLARSSL_ARC4_ALT #define POLARSSL_BLOWFISH_ALT #define POLARSSL_CAMELLIA_ALT #define POLARSSL_DES_ALT #define POLARSSL_XTEA_ALT #define POLARSSL_MD2_ALT #define POLARSSL_MD4_ALT #define POLARSSL_MD5_ALT #define POLARSSL_SHA1_ALT #define POLARSSL_SHA256_ALT #define POLARSSL_SHA512_ALT */ /** * \def POLARSSL_AES_ROM_TABLES * * Store the AES tables in ROM. * * Uncomment this macro to store the AES tables in ROM. * #define POLARSSL_AES_ROM_TABLES */ /** * \def POLARSSL_CIPHER_MODE_CBC * * Enable Cipher Block Chaining mode (CBC) for symmetric ciphers. */ #define POLARSSL_CIPHER_MODE_CBC /** * \def POLARSSL_CIPHER_MODE_CFB * * Enable Cipher Feedback mode (CFB) for symmetric ciphers. */ #define POLARSSL_CIPHER_MODE_CFB /** * \def POLARSSL_CIPHER_MODE_CTR * * Enable Counter Block Cipher mode (CTR) for symmetric ciphers. */ #define POLARSSL_CIPHER_MODE_CTR /** * \def POLARSSL_CIPHER_NULL_CIPHER * * Enable NULL cipher. * Warning: Only do so when you know what you are doing. This allows for * encryption or channels without any security! * * Requires POLARSSL_ENABLE_WEAK_CIPHERSUITES as well to enable * the following ciphersuites: * TLS_RSA_WITH_NULL_MD5 * TLS_RSA_WITH_NULL_SHA * TLS_RSA_WITH_NULL_SHA256 * TLS_ECDHE_RSA_WITH_NULL_SHA * TLS_PSK_WITH_NULL * TLS_PSK_WITH_NULL256 * TLS_PSK_WITH_NULL384 * TLS_DHE_PSK_WITH_NULL * TLS_DHE_PSK_WITH_NULL256 * TLS_DHE_PSK_WITH_NULL384 * TLS_RSA_PSK_WITH_NULL * TLS_RSA_PSK_WITH_NULL256 * TLS_RSA_PSK_WITH_NULL384 * * Uncomment this macro to enable the NULL cipher and ciphersuites #define POLARSSL_CIPHER_NULL_CIPHER */ /** * \def POLARSSL_CIPHER_PADDING_XXX * * Uncomment or comment macros to add support for specific padding modes * in the cipher layer with cipher modes that support padding (e.g. CBC) * * If you disable all padding modes, only full blocks can be used with CBC. * * Enable padding modes in the cipher layer. */ #define POLARSSL_CIPHER_PADDING_PKCS7 #define POLARSSL_CIPHER_PADDING_ONE_AND_ZEROS #define POLARSSL_CIPHER_PADDING_ZEROS_AND_LEN #define POLARSSL_CIPHER_PADDING_ZEROS /** * \def POLARSSL_ENABLE_WEAK_CIPHERSUITES * * Enable weak ciphersuites in SSL / TLS * Warning: Only do so when you know what you are doing. This allows for * channels with virtually no security at all! * * This enables the following ciphersuites: * TLS_RSA_WITH_DES_CBC_SHA * TLS_DHE_RSA_WITH_DES_CBC_SHA * * Uncomment this macro to enable weak ciphersuites #define POLARSSL_ENABLE_WEAK_CIPHERSUITES */ /** * \def POLARSSL_ECP_XXXX_ENABLED * * Enables specific curves within the Elliptic Curve module. * By default all supported curves are enables. * * Comment macros to disable the curve and functions for it */ #define POLARSSL_ECP_DP_SECP192R1_ENABLED #define POLARSSL_ECP_DP_SECP224R1_ENABLED #define POLARSSL_ECP_DP_SECP256R1_ENABLED #define POLARSSL_ECP_DP_SECP384R1_ENABLED #define POLARSSL_ECP_DP_SECP521R1_ENABLED /** * \def POLARSSL_KEY_EXCHANGE_PSK_ENABLED * * Enable the PSK based ciphersuite modes in SSL / TLS * * This enables the following ciphersuites (if other requisites are * enabled as well): * TLS_PSK_WITH_RC4_128_SHA * TLS_PSK_WITH_3DES_EDE_CBC_SHA * TLS_PSK_WITH_AES_128_CBC_SHA * TLS_PSK_WITH_AES_256_CBC_SHA * TLS_PSK_WITH_AES_128_CBC_SHA256 * TLS_PSK_WITH_AES_256_CBC_SHA384 * TLS_PSK_WITH_AES_128_GCM_SHA256 * TLS_PSK_WITH_AES_256_GCM_SHA384 */ #define POLARSSL_KEY_EXCHANGE_PSK_ENABLED /** * \def POLARSSL_KEY_EXCHANGE_DHE_PSK_ENABLED * * Enable the DHE-PSK based ciphersuite modes in SSL / TLS * * Requires: POLARSSL_DHM_C * * This enables the following ciphersuites (if other requisites are * enabled as well): * TLS_DHE_PSK_WITH_RC4_128_SHA * TLS_DHE_PSK_WITH_3DES_EDE_CBC_SHA * TLS_DHE_PSK_WITH_AES_128_CBC_SHA * TLS_DHE_PSK_WITH_AES_256_CBC_SHA * TLS_DHE_PSK_WITH_AES_128_CBC_SHA256 * TLS_DHE_PSK_WITH_AES_256_CBC_SHA384 * TLS_DHE_PSK_WITH_AES_128_GCM_SHA256 * TLS_DHE_PSK_WITH_AES_256_GCM_SHA384 */ #define POLARSSL_KEY_EXCHANGE_DHE_PSK_ENABLED /** * \def POLARSSL_KEY_EXCHANGE_RSA_PSK_ENABLED * * Enable the RSA-PSK based ciphersuite modes in SSL / TLS * (NOT YET IMPLEMENTED) * Requires: POLARSSL_RSA_C, POLARSSL_X509_CRT_PARSE_C, POLARSSL_PKCS1_V15 * * This enables the following ciphersuites (if other requisites are * enabled as well): * TLS_RSA_PSK_WITH_RC4_128_SHA * TLS_RSA_PSK_WITH_3DES_EDE_CBC_SHA * TLS_RSA_PSK_WITH_AES_128_CBC_SHA * TLS_RSA_PSK_WITH_AES_256_CBC_SHA * TLS_RSA_PSK_WITH_AES_128_CBC_SHA256 * TLS_RSA_PSK_WITH_AES_256_CBC_SHA384 * TLS_RSA_PSK_WITH_AES_128_GCM_SHA256 * TLS_RSA_PSK_WITH_AES_256_GCM_SHA384 #define POLARSSL_KEY_EXCHANGE_RSA_PSK_ENABLED */ /** * \def POLARSSL_KEY_EXCHANGE_RSA_ENABLED * * Enable the RSA-only based ciphersuite modes in SSL / TLS * * Requires: POLARSSL_RSA_C, POLARSSL_X509_CRT_PARSE_C, POLARSSL_PKCS1_V15 * * This enables the following ciphersuites (if other requisites are * enabled as well): * TLS_RSA_WITH_AES_128_CBC_SHA * TLS_RSA_WITH_AES_256_CBC_SHA * TLS_RSA_WITH_AES_128_CBC_SHA256 * TLS_RSA_WITH_AES_256_CBC_SHA256 * TLS_RSA_WITH_AES_128_GCM_SHA256 * TLS_RSA_WITH_AES_256_GCM_SHA384 * TLS_RSA_WITH_RC4_128_MD5 * TLS_RSA_WITH_RC4_128_SHA * TLS_RSA_WITH_CAMELLIA_128_CBC_SHA * TLS_RSA_WITH_CAMELLIA_256_CBC_SHA * TLS_RSA_WITH_CAMELLIA_128_CBC_SHA256 * TLS_RSA_WITH_CAMELLIA_256_CBC_SHA256 * TLS_RSA_WITH_3DES_EDE_CBC_SHA */ #define POLARSSL_KEY_EXCHANGE_RSA_ENABLED /** * \def POLARSSL_KEY_EXCHANGE_DHE_RSA_ENABLED * * Enable the DHE-RSA based ciphersuite modes in SSL / TLS * * Requires: POLARSSL_DHM_C, POLARSSL_RSA_C, POLARSSL_X509_CRT_PARSE_C, * POLARSSL_PKCS1_V15 * * This enables the following ciphersuites (if other requisites are * enabled as well): * TLS_DHE_RSA_WITH_AES_128_CBC_SHA * TLS_DHE_RSA_WITH_AES_256_CBC_SHA * TLS_DHE_RSA_WITH_AES_128_CBC_SHA256 * TLS_DHE_RSA_WITH_AES_256_CBC_SHA256 * TLS_DHE_RSA_WITH_CAMELLIA_128_CBC_SHA * TLS_DHE_RSA_WITH_CAMELLIA_256_CBC_SHA * TLS_DHE_RSA_WITH_CAMELLIA_128_CBC_SHA256 * TLS_DHE_RSA_WITH_CAMELLIA_256_CBC_SHA256 * TLS_DHE_RSA_WITH_3DES_EDE_CBC_SHA */ #define POLARSSL_KEY_EXCHANGE_DHE_RSA_ENABLED /** * \def POLARSSL_KEY_EXCHANGE_ECDHE_RSA_ENABLED * * Enable the ECDHE-RSA based ciphersuite modes in SSL / TLS * * Requires: POLARSSL_ECDH_C, POLARSSL_RSA_C, POLARSSL_X509_CRT_PARSE_C, * POLARSSL_PKCS1_V15 * * This enables the following ciphersuites (if other requisites are * enabled as well): * TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA * TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA * TLS_ECDHE_RSA_WITH_RC4_128_SHA * TLS_ECDHE_RSA_WITH_3DES_EDE_CBC_SHA * TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256 * TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA384 * TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256 * TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384 * TLS_ECDHE_RSA_WITH_CAMELLIA_128_CBC_SHA256 * TLS_ECDHE_RSA_WITH_CAMELLIA_256_CBC_SHA384 */ #define POLARSSL_KEY_EXCHANGE_ECDHE_RSA_ENABLED /** * \def POLARSSL_KEY_EXCHANGE_ECDHE_ECDSA_ENABLED * * Enable the ECDHE-ECDSA based ciphersuite modes in SSL / TLS * * Requires: POLARSSL_ECDH_C, POLARSSL_ECDSA_C, POLARSSL_X509_CRT_PARSE_C * * This enables the following ciphersuites (if other requisites are * enabled as well): * TLS_ECDHE_ECDSA_WITH_RC4_128_SHA, * TLS_ECDHE_ECDSA_WITH_3DES_EDE_CBC_SHA, * TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA, * TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA, * TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA256, * TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA384, * TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256, * TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384, * TLS_ECDHE_ECDSA_WITH_CAMELLIA_128_CBC_SHA256, * TLS_ECDHE_ECDSA_WITH_CAMELLIA_256_CBC_SHA384, */ #define POLARSSL_KEY_EXCHANGE_ECDHE_ECDSA_ENABLED /** * \def POLARSSL_ERROR_STRERROR_BC * * Make available the backward compatible error_strerror() next to the * current polarssl_strerror(). * * Disable if you run into name conflicts and want to really remove the * error_strerror() */ #define POLARSSL_ERROR_STRERROR_BC /** * \def POLARSSL_ERROR_STRERROR_DUMMY * * Enable a dummy error function to make use of polarssl_strerror() in * third party libraries easier. * * Disable if you run into name conflicts and want to really remove the * polarssl_strerror() */ #define POLARSSL_ERROR_STRERROR_DUMMY /** * \def POLARSSL_GENPRIME * * Requires: POLARSSL_BIGNUM_C, POLARSSL_RSA_C * * Enable the RSA prime-number generation code. */ #define POLARSSL_GENPRIME /** * \def POLARSSL_FS_IO * * Enable functions that use the filesystem. */ #define POLARSSL_FS_IO /** * \def POLARSSL_NO_DEFAULT_ENTROPY_SOURCES * * Do not add default entropy sources. These are the platform specific, * hardclock and HAVEGE based poll functions. * * This is useful to have more control over the added entropy sources in an * application. * * Uncomment this macro to prevent loading of default entropy functions. #define POLARSSL_NO_DEFAULT_ENTROPY_SOURCES */ /** * \def POLARSSL_NO_PLATFORM_ENTROPY * * Do not use built-in platform entropy functions. * This is useful if your platform does not support * standards like the /dev/urandom or Windows CryptoAPI. * * Uncomment this macro to disable the built-in platform entropy functions. #define POLARSSL_NO_PLATFORM_ENTROPY */ /** * \def POLARSSL_MEMORY_DEBUG * * Enable debugging of buffer allocator memory issues. Automatically prints * (to stderr) all (fatal) messages on memory allocation issues. Enables * function for 'debug output' of allocated memory. * * Requires: POLARSSL_MEMORY_BUFFER_ALLOC_C * fprintf() * * Uncomment this macro to let the buffer allocator print out error messages. #define POLARSSL_MEMORY_DEBUG */ /** * \def POLARSSL_MEMORY_BACKTRACE * * Include backtrace information with each allocated block. * * Requires: POLARSSL_MEMORY_BUFFER_ALLOC_C * GLIBC-compatible backtrace() an backtrace_symbols() support * * Uncomment this macro to include backtrace information #define POLARSSL_MEMORY_BACKTRACE */ /** * \def POLARSSL_PKCS1_V15 * * Requires: POLARSSL_RSA_C * * Enable support for PKCS#1 v1.5 encoding. * This enables support for PKCS#1 v1.5 operations. */ #define POLARSSL_PKCS1_V15 /** * \def POLARSSL_PKCS1_V21 * * Requires: POLARSSL_MD_C, POLARSSL_RSA_C * * Enable support for PKCS#1 v2.1 encoding. * This enables support for RSAES-OAEP and RSASSA-PSS operations. */ #define POLARSSL_PKCS1_V21 /** * \def POLARSSL_RSA_NO_CRT * * Do not use the Chinese Remainder Theorem for the RSA private operation. * * Uncomment this macro to disable the use of CRT in RSA. * #define POLARSSL_RSA_NO_CRT */ /** * \def POLARSSL_SELF_TEST * * Enable the checkup functions (*_self_test). */ #define POLARSSL_SELF_TEST /** * \def POLARSSL_SSL_ALL_ALERT_MESSAGES * * Enable sending of alert messages in case of encountered errors as per RFC. * If you choose not to send the alert messages, PolarSSL can still communicate * with other servers, only debugging of failures is harder. * * The advantage of not sending alert messages, is that no information is given * about reasons for failures thus preventing adversaries of gaining intel. * * Enable sending of all alert messages */ #define POLARSSL_SSL_ALERT_MESSAGES /** * \def POLARSSL_SSL_DEBUG_ALL * * Enable the debug messages in SSL module for all issues. * Debug messages have been disabled in some places to prevent timing * attacks due to (unbalanced) debugging function calls. * * If you need all error reporting you should enable this during debugging, * but remove this for production servers that should log as well. * * Uncomment this macro to report all debug messages on errors introducing * a timing side-channel. * #define POLARSSL_SSL_DEBUG_ALL */ /** * \def POLARSSL_SSL_HW_RECORD_ACCEL * * Enable hooking functions in SSL module for hardware acceleration of * individual records. * * Uncomment this macro to enable hooking functions. #define POLARSSL_SSL_HW_RECORD_ACCEL */ /** * \def POLARSSL_SSL_SRV_SUPPORT_SSLV2_CLIENT_HELLO * * Enable support for receiving and parsing SSLv2 Client Hello messages for the * SSL Server module (POLARSSL_SSL_SRV_C) * * Comment this macro to disable support for SSLv2 Client Hello messages. */ #define POLARSSL_SSL_SRV_SUPPORT_SSLV2_CLIENT_HELLO /** * \def POLARSSL_SSL_MAX_FRAGMENT_LENGTH * * Enable support for RFC 6066 max_fragment_length extension in SSL * * Comment this macro to disable support for the max_fragment_length extension */ #define POLARSSL_SSL_MAX_FRAGMENT_LENGTH /** * \def POLARSSL_SSL_PROTO_SSL3 * * Enable support for SSL 3.0 * * Requires: POLARSSL_MD5_C * POLARSSL_SHA1_C * * Comment this macro to disable support for SSL 3.0 */ #define POLARSSL_SSL_PROTO_SSL3 /** * \def POLARSSL_SSL_PROTO_TLS1 * * Enable support for TLS 1.0 * * Requires: POLARSSL_MD5_C * POLARSSL_SHA1_C * * Comment this macro to disable support for TLS 1.0 */ #define POLARSSL_SSL_PROTO_TLS1 /** * \def POLARSSL_SSL_PROTO_TLS1_1 * * Enable support for TLS 1.1 * * Requires: POLARSSL_MD5_C * POLARSSL_SHA1_C * * Comment this macro to disable support for TLS 1.1 */ #define POLARSSL_SSL_PROTO_TLS1_1 /** * \def POLARSSL_SSL_PROTO_TLS1_2 * * Enable support for TLS 1.2 * * Requires: POLARSSL_SHA256_C or POLARSSL_SHA512_C * (Depends on ciphersuites) * * Comment this macro to disable support for TLS 1.2 */ #define POLARSSL_SSL_PROTO_TLS1_2 /** * \def POLARSSL_SSL_SESSION_TICKETS * * Enable support for RFC 5077 session tickets in SSL * * Requires: POLARSSL_AES_C * POLARSSL_SHA256_C * POLARSSL_CIPHER_MODE_CBC * * Comment this macro to disable support for SSL session tickets */ #define POLARSSL_SSL_SESSION_TICKETS /** * \def POLARSSL_SSL_SERVER_NAME_INDICATION * * Enable support for RFC 6066 server name indication (SNI) in SSL * * Comment this macro to disable support for server name indication in SSL */ #define POLARSSL_SSL_SERVER_NAME_INDICATION /** * \def POLARSSL_SSL_TRUNCATED_HMAC * * Enable support for RFC 6066 truncated HMAC in SSL * * Comment this macro to disable support for truncated HMAC in SSL */ #define POLARSSL_SSL_TRUNCATED_HMAC /** * \def POLARSSL_X509_ALLOW_UNSUPPORTED_CRITICAL_EXTENSION * * If set, the X509 parser will not break-off when parsing an X509 certificate * and encountering an unknown critical extension. * * Uncomment to prevent an error. * #define POLARSSL_X509_ALLOW_UNSUPPORTED_CRITICAL_EXTENSION */ /** * \def POLARSSL_ZLIB_SUPPORT * * If set, the SSL/TLS module uses ZLIB to support compression and * decompression of packet data. * * Used in: library/ssl_tls.c * library/ssl_cli.c * library/ssl_srv.c * * This feature requires zlib library and headers to be present. * * Uncomment to enable use of ZLIB #define POLARSSL_ZLIB_SUPPORT */ /* \} name */ /** * \name SECTION: PolarSSL modules * * This section enables or disables entire modules in PolarSSL * \{ */ /** * \def POLARSSL_AES_C * * Enable the AES block cipher. * * Module: library/aes.c * Caller: library/ssl_tls.c * library/pem.c * library/ctr_drbg.c * * This module enables the following ciphersuites (if other requisites are * enabled as well): * TLS_RSA_WITH_AES_128_CBC_SHA * TLS_RSA_WITH_AES_256_CBC_SHA * TLS_DHE_RSA_WITH_AES_128_CBC_SHA * TLS_DHE_RSA_WITH_AES_256_CBC_SHA * TLS_RSA_WITH_AES_128_CBC_SHA256 * TLS_RSA_WITH_AES_256_CBC_SHA256 * TLS_DHE_RSA_WITH_AES_128_CBC_SHA256 * TLS_DHE_RSA_WITH_AES_256_CBC_SHA256 * TLS_RSA_WITH_AES_128_GCM_SHA256 * TLS_RSA_WITH_AES_256_GCM_SHA384 * TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA * TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA * TLS_PSK_WITH_AES_128_CBC_SHA * TLS_PSK_WITH_AES_256_CBC_SHA * * PEM_PARSE uses AES for decrypting encrypted keys. */ #define POLARSSL_AES_C /** * \def POLARSSL_ARC4_C * * Enable the ARCFOUR stream cipher. * * Module: library/arc4.c * Caller: library/ssl_tls.c * * This module enables the following ciphersuites (if other requisites are * enabled as well): * TLS_RSA_WITH_RC4_128_MD5 * TLS_RSA_WITH_RC4_128_SHA * TLS_ECDHE_RSA_WITH_RC4_128_SHA * TLS_PSK_WITH_RC4_128_SHA */ #define POLARSSL_ARC4_C /** * \def POLARSSL_ASN1_PARSE_C * * Enable the generic ASN1 parser. * * Module: library/asn1.c * Caller: library/x509parse.c */ #define POLARSSL_ASN1_PARSE_C /** * \def POLARSSL_ASN1_WRITE_C * * Enable the generic ASN1 writer. * * Module: library/asn1write.c */ #define POLARSSL_ASN1_WRITE_C /** * \def POLARSSL_BASE64_C * * Enable the Base64 module. * * Module: library/base64.c * Caller: library/pem.c * * This module is required for PEM support (required by X.509). */ #define POLARSSL_BASE64_C /** * \def POLARSSL_BIGNUM_C * * Enable the multi-precision integer library. * * Module: library/bignum.c * Caller: library/dhm.c * library/rsa.c * library/ssl_tls.c * library/x509parse.c * * This module is required for RSA and DHM support. */ #define POLARSSL_BIGNUM_C /** * \def POLARSSL_BLOWFISH_C * * Enable the Blowfish block cipher. * * Module: library/blowfish.c */ #define POLARSSL_BLOWFISH_C /** * \def POLARSSL_CAMELLIA_C * * Enable the Camellia block cipher. * * Module: library/camellia.c * Caller: library/ssl_tls.c * * This module enables the following ciphersuites (if other requisites are * enabled as well): * TLS_RSA_WITH_CAMELLIA_128_CBC_SHA * TLS_RSA_WITH_CAMELLIA_256_CBC_SHA * TLS_DHE_RSA_WITH_CAMELLIA_128_CBC_SHA * TLS_DHE_RSA_WITH_CAMELLIA_256_CBC_SHA * TLS_RSA_WITH_CAMELLIA_128_CBC_SHA256 * TLS_RSA_WITH_CAMELLIA_256_CBC_SHA256 * TLS_DHE_RSA_WITH_CAMELLIA_128_CBC_SHA256 * TLS_DHE_RSA_WITH_CAMELLIA_256_CBC_SHA256 */ #define POLARSSL_CAMELLIA_C /** * \def POLARSSL_CERTS_C * * Enable the test certificates. * * Module: library/certs.c * Caller: * * This module is used for testing (ssl_client/server). */ #define POLARSSL_CERTS_C /** * \def POLARSSL_CIPHER_C * * Enable the generic cipher layer. * * Module: library/cipher.c * Caller: library/ssl_tls.c * * Uncomment to enable generic cipher wrappers. */ #define POLARSSL_CIPHER_C /** * \def POLARSSL_CTR_DRBG_C * * Enable the CTR_DRBG AES-256-based random generator * * Module: library/ctr_drbg.c * Caller: * * Requires: POLARSSL_AES_C * * This module provides the CTR_DRBG AES-256 random number generator. */ #define POLARSSL_CTR_DRBG_C /** * \def POLARSSL_DEBUG_C * * Enable the debug functions. * * Module: library/debug.c * Caller: library/ssl_cli.c * library/ssl_srv.c * library/ssl_tls.c * * This module provides debugging functions. */ #define POLARSSL_DEBUG_C /** * \def POLARSSL_DES_C * * Enable the DES block cipher. * * Module: library/des.c * Caller: library/pem.c * library/ssl_tls.c * * This module enables the following ciphersuites (if other requisites are * enabled as well): * TLS_RSA_WITH_3DES_EDE_CBC_SHA * TLS_DHE_RSA_WITH_3DES_EDE_CBC_SHA * TLS_ECDHE_RSA_WITH_3DES_EDE_CBC_SHA * TLS_PSK_WITH_3DES_EDE_CBC_SHA * * PEM_PARSE uses DES/3DES for decrypting encrypted keys. */ #define POLARSSL_DES_C /** * \def POLARSSL_DHM_C * * Enable the Diffie-Hellman-Merkle key exchange. * * Module: library/dhm.c * Caller: library/ssl_cli.c * library/ssl_srv.c * * This module enables the following ciphersuites (if other requisites are * enabled as well): * TLS_DHE_RSA_WITH_DES_CBC_SHA * TLS_DHE_RSA_WITH_3DES_EDE_CBC_SHA * TLS_DHE_RSA_WITH_AES_128_CBC_SHA * TLS_DHE_RSA_WITH_AES_256_CBC_SHA * TLS_DHE_RSA_WITH_AES_128_CBC_SHA256 * TLS_DHE_RSA_WITH_AES_256_CBC_SHA256 * TLS_DHE_RSA_WITH_CAMELLIA_128_CBC_SHA * TLS_DHE_RSA_WITH_CAMELLIA_256_CBC_SHA * TLS_DHE_RSA_WITH_CAMELLIA_128_CBC_SHA256 * TLS_DHE_RSA_WITH_CAMELLIA_256_CBC_SHA256 * TLS_DHE_RSA_WITH_AES_128_GCM_SHA256 * TLS_DHE_RSA_WITH_AES_256_GCM_SHA384 */ #define POLARSSL_DHM_C /** * \def POLARSSL_ECDH_C * * Enable the elliptic curve Diffie-Hellman library. * * Module: library/ecdh.c * Caller: library/ssl_cli.c * library/ssl_srv.c * * This module enables the following ciphersuites (if other requisites are * enabled as well): * TLS_ECDHE_RSA_WITH_NULL_SHA * TLS_ECDHE_RSA_WITH_RC4_128_SHA * TLS_ECDHE_RSA_WITH_3DES_EDE_CBC_SHA * TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA * TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA * * Requires: POLARSSL_ECP_C */ #define POLARSSL_ECDH_C /** * \def POLARSSL_ECDSA_C * * Enable the elliptic curve DSA library. * * Module: library/ecdsa.c * Caller: * * Requires: POLARSSL_ECP_C, POLARSSL_ASN1_WRITE_C, POLARSSL_ASN1_PARSE_C */ #define POLARSSL_ECDSA_C /** * \def POLARSSL_ECP_C * * Enable the elliptic curve over GF(p) library. * * Module: library/ecp.c * Caller: library/ecdh.c * library/ecdsa.c * * Requires: POLARSSL_BIGNUM_C */ #define POLARSSL_ECP_C /** * \def POLARSSL_ENTROPY_C * * Enable the platform-specific entropy code. * * Module: library/entropy.c * Caller: * * Requires: POLARSSL_SHA512_C * * This module provides a generic entropy pool */ #define POLARSSL_ENTROPY_C /** * \def POLARSSL_ERROR_C * * Enable error code to error string conversion. * * Module: library/error.c * Caller: * * This module enables err_strerror(). */ #define POLARSSL_ERROR_C /** * \def POLARSSL_GCM_C * * Enable the Galois/Counter Mode (GCM) for AES * * Module: library/gcm.c * * Requires: POLARSSL_AES_C * * This module enables the following ciphersuites (if other requisites are * enabled as well): * TLS_RSA_WITH_AES_128_GCM_SHA256 * TLS_RSA_WITH_AES_256_GCM_SHA384 */ #define POLARSSL_GCM_C /** * \def POLARSSL_HAVEGE_C * * Enable the HAVEGE random generator. * * Warning: the HAVEGE random generator is not suitable for virtualized * environments * * Warning: the HAVEGE random generator is dependent on timing and specific * processor traits. It is therefore not advised to use HAVEGE as * your applications primary random generator or primary entropy pool * input. As a secondary input to your entropy pool, it IS able add * the (limited) extra entropy it provides. * * Module: library/havege.c * Caller: * * Requires: POLARSSL_TIMING_C * * Uncomment to enable the HAVEGE random generator. #define POLARSSL_HAVEGE_C */ /** * \def POLARSSL_MD_C * * Enable the generic message digest layer. * * Module: library/md.c * Caller: * * Uncomment to enable generic message digest wrappers. */ #define POLARSSL_MD_C /** * \def POLARSSL_MD2_C * * Enable the MD2 hash algorithm * * Module: library/md2.c * Caller: library/x509parse.c * * Uncomment to enable support for (rare) MD2-signed X.509 certs. * #define POLARSSL_MD2_C */ /** * \def POLARSSL_MD4_C * * Enable the MD4 hash algorithm * * Module: library/md4.c * Caller: library/x509parse.c * * Uncomment to enable support for (rare) MD4-signed X.509 certs. * #define POLARSSL_MD4_C */ /** * \def POLARSSL_MD5_C * * Enable the MD5 hash algorithm * * Module: library/md5.c * Caller: library/pem.c * library/ssl_tls.c * library/x509parse.c * * This module is required for SSL/TLS and X.509. * PEM_PARSE uses MD5 for decrypting encrypted keys. */ #define POLARSSL_MD5_C /** * \def POLARSSL_MEMORY_C * * Enable the memory allocation layer. * By default PolarSSL uses the system-provided malloc() and free(). * (As long as POLARSSL_MEMORY_STDMALLOC and POLARSSL_MEMORY_STDFREE * are defined and unmodified) * * This allows different allocators (self-implemented or provided) * * Enable this layer to allow use of alternative memory allocators. #define POLARSSL_MEMORY_C */ /** * The buffer allocator implementation that makes use of a (stack) based * buffer to 'allocate' dynamic memory. (replaces malloc() and free() calls) * * Module: library/memory_buffer_alloc.c * * Requires: POLARSSL_MEMORY_C * * Enable this module to enable the buffer memory allocator. #define POLARSSL_MEMORY_BUFFER_ALLOC_C */ /** * \def POLARSSL_NET_C * * Enable the TCP/IP networking routines. * * Module: library/net.c * * This module provides TCP/IP networking routines. */ #define POLARSSL_NET_C /** * \def POLARSSL_OID_C * * Enable the OID database * * Module: library/oid.c * Caller: library/rsa.c * library/x509parse.c * library/x509write.c * * This modules translates between OIDs and internal values. */ #define POLARSSL_OID_C /** * \def POLARSSL_PADLOCK_C * * Enable VIA Padlock support on x86. * * Module: library/padlock.c * Caller: library/aes.c * * This modules adds support for the VIA PadLock on x86. */ #define POLARSSL_PADLOCK_C /** * \def POLARSSL_PBKDF2_C * * Enable PKCS#5 PBKDF2 key derivation function * DEPRECATED: Use POLARSSL_PKCS5_C instead * * Module: library/pbkdf2.c * * Requires: POLARSSL_PKCS5_C * * This module adds support for the PKCS#5 PBKDF2 key derivation function. */ #define POLARSSL_PBKDF2_C /** * \def POLARSSL_PEM_PARSE_C * * Enable PEM decoding / parsing * * Module: library/pem.c * Caller: library/x509parse.c * library/pkparse.c * * Requires: POLARSSL_BASE64_C * * This modules adds support for decoding / parsing PEM files. */ #define POLARSSL_PEM_PARSE_C /** * \def POLARSSL_PEM_WRITE_C * * Enable PEM encoding / writing * * Module: library/pem.c * Caller: library/x509write.c * library/pkwrite.c * * Requires: POLARSSL_BASE64_C * * This modules adds support for encoding / writing PEM files. */ #define POLARSSL_PEM_WRITE_C /** * \def POLARSSL_PK_C * * Enable the generic public (asymetric) key layer. * * Module: library/pk.c * Caller: library/x509parse.c * library/ssl_tls.c * library/ssl_cli.c * library/ssl_srv.c * * Uncomment to enable generic public key wrappers. */ #define POLARSSL_PK_C /** * \def POLARSSL_PK_PARSE_C * * Enable the generic public (asymetric) key parser. * * Module: library/pkparse.c * Caller: library/x509parse.c * * Requires: POLARSSL_PK_C * * Uncomment to enable generic public key parse functions. */ #define POLARSSL_PK_PARSE_C /** * \def POLARSSL_PK_WRITE_C * * Enable the generic public (asymetric) key write. * * Module: library/pkwrite.c * Caller: library/x509write.c * * Requires: POLARSSL_PK_C * * Uncomment to enable generic public key write functions. */ #define POLARSSL_PK_WRITE_C /** * \def POLARSSL_PKCS5_C * * Enable PKCS#5 functions * * Module: library/pkcs5.c * * Requires: POLARSSL_MD_C * * This module adds support for the PKCS#5 functions. */ #define POLARSSL_PKCS5_C /** * \def POLARSSL_PKCS11_C * * Enable wrapper for PKCS#11 smartcard support. * * Module: library/pkcs11.c * Caller: library/pk.c * * Requires: POLARSSL_PK_C * * This module enables SSL/TLS PKCS #11 smartcard support. * Requires the presence of the PKCS#11 helper library (libpkcs11-helper) #define POLARSSL_PKCS11_C */ /** * \def POLARSSL_PKCS12_C * * Enable PKCS#12 PBE functions * Adds algorithms for parsing PKCS#8 encrypted private keys * * Module: library/pkcs12.c * Caller: library/x509parse.c * * Requires: POLARSSL_ASN1_PARSE_C, POLARSSL_CIPHER_C, POLARSSL_MD_C * Can use: POLARSSL_ARC4_C * * This module enables PKCS#12 functions. */ #define POLARSSL_PKCS12_C /** * \def POLARSSL_RSA_C * * Enable the RSA public-key cryptosystem. * * Module: library/rsa.c * Caller: library/ssl_cli.c * library/ssl_srv.c * library/ssl_tls.c * library/x509.c * * Requires: POLARSSL_BIGNUM_C, POLARSSL_OID_C * * This module is required for SSL/TLS and MD5-signed certificates. */ #define POLARSSL_RSA_C /** * \def POLARSSL_SHA1_C * * Enable the SHA1 cryptographic hash algorithm. * * Module: library/sha1.c * Caller: library/ssl_cli.c * library/ssl_srv.c * library/ssl_tls.c * library/x509parse.c * * This module is required for SSL/TLS and SHA1-signed certificates. */ #define POLARSSL_SHA1_C /** * \def POLARSSL_SHA256_C * * Enable the SHA-224 and SHA-256 cryptographic hash algorithms. * (Used to be POLARSSL_SHA2_C) * * Module: library/sha256.c * Caller: library/md_wrap.c * library/x509parse.c * * This module adds support for SHA-224 and SHA-256. * This module is required for the SSL/TLS 1.2 PRF function. */ #define POLARSSL_SHA256_C /** * \def POLARSSL_SHA512_C * * Enable the SHA-384 and SHA-512 cryptographic hash algorithms. * (Used to be POLARSSL_SHA4_C) * * Module: library/sha512.c * Caller: library/md_wrap.c * library/x509parse.c * * This module adds support for SHA-384 and SHA-512. */ #define POLARSSL_SHA512_C /** * \def POLARSSL_SSL_CACHE_C * * Enable simple SSL cache implementation. * * Module: library/ssl_cache.c * Caller: * * Requires: POLARSSL_SSL_CACHE_C */ #define POLARSSL_SSL_CACHE_C /** * \def POLARSSL_SSL_CLI_C * * Enable the SSL/TLS client code. * * Module: library/ssl_cli.c * Caller: * * Requires: POLARSSL_SSL_TLS_C * * This module is required for SSL/TLS client support. */ #define POLARSSL_SSL_CLI_C /** * \def POLARSSL_SSL_SRV_C * * Enable the SSL/TLS server code. * * Module: library/ssl_srv.c * Caller: * * Requires: POLARSSL_SSL_TLS_C * * This module is required for SSL/TLS server support. */ #define POLARSSL_SSL_SRV_C /** * \def POLARSSL_SSL_TLS_C * * Enable the generic SSL/TLS code. * * Module: library/ssl_tls.c * Caller: library/ssl_cli.c * library/ssl_srv.c * * Requires: POLARSSL_CIPHER_C, POLARSSL_PK_C, POLARSSL_MD_C * and at least one of the POLARSSL_SSL_PROTO_* defines * * This module is required for SSL/TLS. */ #define POLARSSL_SSL_TLS_C /** * \def POLARSSL_TIMING_C * * Enable the portable timing interface. * * Module: library/timing.c * Caller: library/havege.c * * This module is used by the HAVEGE random number generator. */ #define POLARSSL_TIMING_C /** * \def POLARSSL_VERSION_C * * Enable run-time version information. * * Module: library/version.c * * This module provides run-time version information. */ #define POLARSSL_VERSION_C /** * \def POLARSSL_X509_USE_C * * Enable X.509 core for using certificates * * Module: library/x509.c * Caller: library/x509_crl.c * library/x509_crt.c * library/x509_csr.c * * Requires: POLARSSL_ASN1_PARSE_C, POLARSSL_BIGNUM_C, POLARSSL_OID_C, * POLARSSL_PK_PARSE_C * * This module is required for the X.509 parsing modules. */ #define POLARSSL_X509_USE_C /** * \def POLARSSL_X509_CRT_PARSE_C * * Enable X.509 certificate parsing. * * Module: library/x509_crt.c * Caller: library/ssl_cli.c * library/ssl_srv.c * library/ssl_tls.c * * Requires: POLARSSL_X509_USE_C * * This module is required for X.509 certificate parsing. */ #define POLARSSL_X509_CRT_PARSE_C /** * \def POLARSSL_X509_CRL_PARSE_C * * Enable X.509 CRL parsing. * * Module: library/x509_crl.c * Caller: library/x509_crt.c * * Requires: POLARSSL_X509_USE_C * * This module is required for X.509 CRL parsing. */ #define POLARSSL_X509_CRL_PARSE_C /** * \def POLARSSL_X509_CSR_PARSE_C * * Enable X.509 Certificate Signing Request (CSR) parsing. * * Module: library/x509_csr.c * Caller: library/x509_crt_write.c * * Requires: POLARSSL_X509_USE_C * * This module is used for reading X.509 certificate request. */ #define POLARSSL_X509_CSR_PARSE_C /** * \def POLARSSL_X509_CREATE_C * * Enable X.509 core for creating certificates * * Module: library/x509_create.c * * Requires: POLARSSL_BIGNUM_C, POLARSSL_OID_C, POLARSSL_PK_WRITE_C * * This module is the basis for creating X.509 certificates and CSRs. */ #define POLARSSL_X509_CREATE_C /** * \def POLARSSL_X509_CRT_WRITE_C * * Enable creating X.509 certificates. * * Module: library/x509_crt_write.c * * Requires: POLARSSL_CREATE_C * * This module is required for X.509 certificate creation. */ #define POLARSSL_X509_CRT_WRITE_C /** * \def POLARSSL_X509_CSR_WRITE_C * * Enable creating X.509 Certificate Signing Requests (CSR) * * Module: library/x509_csr_write.c * * Requires: POLARSSL_CREATE_C * * This module is required for X.509 certificate request writing. */ #define POLARSSL_X509_CSR_WRITE_C /** * \def POLARSSL_XTEA_C * * Enable the XTEA block cipher. * * Module: library/xtea.c * Caller: */ #define POLARSSL_XTEA_C /* \} name */ /** * \name SECTION: Module configuration options * * This section allows for the setting of module specific sizes and * configuration options. The default values are already present in the * relevant header files and should suffice for the regular use cases. * Our advice is to enable POLARSSL_CONFIG_OPTIONS and change values here * only if you have a good reason and know the consequences. * * If POLARSSL_CONFIG_OPTIONS is undefined here the options in the module * header file take precedence. * * Please check the respective header file for documentation on these * parameters (to prevent duplicate documentation). * * Uncomment POLARSSL_CONFIG_OPTIONS to enable using the values defined here. * \{ */ //#define POLARSSL_CONFIG_OPTIONS /**< Enable config.h module value configuration */ #if defined(POLARSSL_CONFIG_OPTIONS) // MPI / BIGNUM options // #define POLARSSL_MPI_WINDOW_SIZE 6 /**< Maximum windows size used. */ #define POLARSSL_MPI_MAX_SIZE 512 /**< Maximum number of bytes for usable MPIs. */ // CTR_DRBG options // #define CTR_DRBG_ENTROPY_LEN 48 /**< Amount of entropy used per seed by default (48 with SHA-512, 32 with SHA-256) */ #define CTR_DRBG_RESEED_INTERVAL 10000 /**< Interval before reseed is performed by default */ #define CTR_DRBG_MAX_INPUT 256 /**< Maximum number of additional input bytes */ #define CTR_DRBG_MAX_REQUEST 1024 /**< Maximum number of requested bytes per call */ #define CTR_DRBG_MAX_SEED_INPUT 384 /**< Maximum size of (re)seed buffer */ // Entropy options // #define ENTROPY_MAX_SOURCES 20 /**< Maximum number of sources supported */ #define ENTROPY_MAX_GATHER 128 /**< Maximum amount requested from entropy sources */ // Memory options #define MEMORY_ALIGN_MULTIPLE 4 /**< Align on multiples of this value */ #define POLARSSL_MEMORY_STDMALLOC malloc /**< Default allocator to use, can be undefined */ #define POLARSSL_MEMORY_STDFREE free /**< Default free to use, can be undefined */ // SSL Cache options // #define SSL_CACHE_DEFAULT_TIMEOUT 86400 /**< 1 day */ #define SSL_CACHE_DEFAULT_MAX_ENTRIES 50 /**< Maximum entries in cache */ // SSL options // #define SSL_MAX_CONTENT_LEN 16384 /**< Size of the input / output buffer */ #define SSL_DEFAULT_TICKET_LIFETIME 86400 /**< Lifetime of session tickets (if enabled) */ #endif /* POLARSSL_CONFIG_OPTIONS */ /* \} name */ /* * Sanity checks on defines and dependencies */ #if defined(POLARSSL_DHM_C) && !defined(POLARSSL_BIGNUM_C) #error "POLARSSL_DHM_C defined, but not all prerequisites" #endif #if defined(POLARSSL_CTR_DRBG_C) && !defined(POLARSSL_AES_C) #error "POLARSSL_CTR_DRBG_C defined, but not all prerequisites" #endif #if defined(POLARSSL_ECDH_C) && !defined(POLARSSL_ECP_C) #error "POLARSSL_ECDH_C defined, but not all prerequisites" #endif #if defined(POLARSSL_ECDSA_C) && \ ( !defined(POLARSSL_ECP_C) || \ !defined(POLARSSL_ASN1_PARSE_C) || \ !defined(POLARSSL_ASN1_WRITE_C) ) #error "POLARSSL_ECDSA_C defined, but not all prerequisites" #endif #if defined(POLARSSL_ECP_C) && !defined(POLARSSL_BIGNUM_C) #error "POLARSSL_ECP_C defined, but not all prerequisites" #endif #if defined(POLARSSL_ENTROPY_C) && (!defined(POLARSSL_SHA512_C) && \ !defined(POLARSSL_SHA256_C)) #error "POLARSSL_ENTROPY_C defined, but not all prerequisites" #endif #if defined(POLARSSL_ENTROPY_C) && defined(POLARSSL_SHA512_C) && \ defined(POLARSSL_CONFIG_OPTIONS) && (CTR_DRBG_ENTROPY_LEN > 64) #error "CTR_DRBG_ENTROPY_LEN value too high" #endif #if defined(POLARSSL_ENTROPY_C) && !defined(POLARSSL_SHA512_C) && \ defined(POLARSSL_CONFIG_OPTIONS) && (CTR_DRBG_ENTROPY_LEN > 32) #error "CTR_DRBG_ENTROPY_LEN value too high" #endif #if defined(POLARSSL_GCM_C) && !defined(POLARSSL_AES_C) #error "POLARSSL_GCM_C defined, but not all prerequisites" #endif #if defined(POLARSSL_HAVEGE_C) && !defined(POLARSSL_TIMING_C) #error "POLARSSL_HAVEGE_C defined, but not all prerequisites" #endif #if defined(POLARSSL_KEY_EXCHANGE_DHE_PSK_ENABLED) && !defined(POLARSSL_DHM_C) #error "POLARSSL_KEY_EXCHANGE_DHE_PSK_ENABLED defined, but not all prerequisites" #endif #if defined(POLARSSL_KEY_EXCHANGE_DHE_RSA_ENABLED) && \ ( !defined(POLARSSL_DHM_C) || !defined(POLARSSL_RSA_C) || \ !defined(POLARSSL_X509_CRT_PARSE_C) || !defined(POLARSSL_PKCS1_V15) ) #error "POLARSSL_KEY_EXCHANGE_DHE_RSA_ENABLED defined, but not all prerequisites" #endif #if defined(POLARSSL_KEY_EXCHANGE_ECDHE_RSA_ENABLED) && \ ( !defined(POLARSSL_ECDH_C) || !defined(POLARSSL_RSA_C) || \ !defined(POLARSSL_X509_CRT_PARSE_C) || !defined(POLARSSL_PKCS1_V15) ) #error "POLARSSL_KEY_EXCHANGE_ECDHE_RSA_ENABLED defined, but not all prerequisites" #endif #if defined(POLARSSL_KEY_EXCHANGE_ECDHE_ECDSA_ENABLED) && \ ( !defined(POLARSSL_ECDH_C) || !defined(POLARSSL_ECDSA_C) || \ !defined(POLARSSL_X509_CRT_PARSE_C) ) #error "POLARSSL_KEY_EXCHANGE_ECDHE_ECDSA_ENABLED defined, but not all prerequisites" #endif #if defined(POLARSSL_KEY_EXCHANGE_RSA_PSK_ENABLED) && \ ( !defined(POLARSSL_RSA_C) || !defined(POLARSSL_X509_CRT_PARSE_C) ||\ !defined(POLARSSL_PKCS1_V15) ) #error "POLARSSL_KEY_EXCHANGE_RSA_PSK_ENABLED defined, but not all prerequisites" #endif #if defined(POLARSSL_KEY_EXCHANGE_RSA_ENABLED) && \ ( !defined(POLARSSL_RSA_C) || !defined(POLARSSL_X509_CRT_PARSE_C) ||\ !defined(POLARSSL_PKCS1_V15) ) #error "POLARSSL_KEY_EXCHANGE_RSA_ENABLED defined, but not all prerequisites" #endif #if defined(POLARSSL_MEMORY_BUFFER_ALLOC_C) && !defined(POLARSSL_MEMORY_C) #error "POLARSSL_MEMORY_BUFFER_ALLOC_C defined, but not all prerequisites" #endif #if defined(POLARSSL_PBKDF2_C) && !defined(POLARSSL_MD_C) #error "POLARSSL_PBKDF2_C defined, but not all prerequisites" #endif #if defined(POLARSSL_PEM_PARSE_C) && !defined(POLARSSL_BASE64_C) #error "POLARSSL_PEM_PARSE_C defined, but not all prerequisites" #endif #if defined(POLARSSL_PEM_WRITE_C) && !defined(POLARSSL_BASE64_C) #error "POLARSSL_PEM_WRITE_C defined, but not all prerequisites" #endif #if defined(POLARSSL_PK_PARSE_C) && !defined(POLARSSL_PK_C) #error "POLARSSL_PK_PARSE_C defined, but not all prerequisites" #endif #if defined(POLARSSL_PK_WRITE_C) && !defined(POLARSSL_PK_C) #error "POLARSSL_PK_WRITE_C defined, but not all prerequisites" #endif #if defined(POLARSSL_PKCS11_C) && !defined(POLARSSL_PK_C) #error "POLARSSL_PKCS11_C defined, but not all prerequisites" #endif #if defined(POLARSSL_RSA_C) && ( !defined(POLARSSL_BIGNUM_C) || \ !defined(POLARSSL_OID_C) ) #error "POLARSSL_RSA_C defined, but not all prerequisites" #endif #if defined(POLARSSL_SSL_CLI_C) && !defined(POLARSSL_SSL_TLS_C) #error "POLARSSL_SSL_CLI_C defined, but not all prerequisites" #endif #if defined(POLARSSL_SSL_TLS_C) && ( !defined(POLARSSL_CIPHER_C) || \ !defined(POLARSSL_PK_C) || !defined(POLARSSL_MD_C) ) #error "POLARSSL_SSL_TLS_C defined, but not all prerequisites" #endif #if defined(POLARSSL_SSL_SRV_C) && !defined(POLARSSL_SSL_TLS_C) #error "POLARSSL_SSL_SRV_C defined, but not all prerequisites" #endif #if defined(POLARSSL_SSL_TLS_C) && (!defined(POLARSSL_SSL_PROTO_SSL3) && \ !defined(POLARSSL_SSL_PROTO_TLS1) && !defined(POLARSSL_SSL_PROTO_TLS1_1) && \ !defined(POLARSSL_SSL_PROTO_TLS1_2)) #error "POLARSSL_SSL_TLS_C defined, but no protocols are active" #endif #if defined(POLARSSL_SSL_TLS_C) && (defined(POLARSSL_SSL_PROTO_SSL3) && \ defined(POLARSSL_SSL_PROTO_TLS1_1) && !defined(POLARSSL_SSL_PROTO_TLS1)) #error "Illegal protocol selection" #endif #if defined(POLARSSL_SSL_TLS_C) && (defined(POLARSSL_SSL_PROTO_TLS1) && \ defined(POLARSSL_SSL_PROTO_TLS1_2) && !defined(POLARSSL_SSL_PROTO_TLS1_1)) #error "Illegal protocol selection" #endif #if defined(POLARSSL_SSL_TLS_C) && (defined(POLARSSL_SSL_PROTO_SSL3) && \ defined(POLARSSL_SSL_PROTO_TLS1_2) && (!defined(POLARSSL_SSL_PROTO_TLS1) || \ !defined(POLARSSL_SSL_PROTO_TLS1_1))) #error "Illegal protocol selection" #endif #if defined(POLARSSL_SSL_SESSION_TICKETS) && defined(POLARSSL_SSL_TLS_C) && \ ( !defined(POLARSSL_AES_C) || !defined(POLARSSL_SHA256_C) || \ !defined(POLARSSL_CIPHER_MODE_CBC) ) #error "POLARSSL_SSL_SESSION_TICKETS_C defined, but not all prerequisites" #endif #if defined(POLARSSL_X509_USE_C) && ( !defined(POLARSSL_BIGNUM_C) || \ !defined(POLARSSL_OID_C) || !defined(POLARSSL_ASN1_PARSE_C) || \ !defined(POLARSSL_PK_PARSE_C) ) #error "POLARSSL_X509_USE_C defined, but not all prerequisites" #endif #if defined(POLARSSL_X509_CREATE_C) && ( !defined(POLARSSL_BIGNUM_C) || \ !defined(POLARSSL_OID_C) || !defined(POLARSSL_ASN1_WRITE_C) || \ !defined(POLARSSL_PK_WRITE_C) ) #error "POLARSSL_X509_CREATE_C defined, but not all prerequisites" #endif #if defined(POLARSSL_X509_CRT_PARSE_C) && ( !defined(POLARSSL_X509_USE_C) ) #error "POLARSSL_X509_CRT_PARSE_C defined, but not all prerequisites" #endif #if defined(POLARSSL_X509_CRL_PARSE_C) && ( !defined(POLARSSL_X509_USE_C) ) #error "POLARSSL_X509_CRL_PARSE_C defined, but not all prerequisites" #endif #if defined(POLARSSL_X509_CSR_PARSE_C) && ( !defined(POLARSSL_X509_USE_C) ) #error "POLARSSL_X509_CSR_PARSE_C defined, but not all prerequisites" #endif #if defined(POLARSSL_X509_CRT_WRITE_C) && ( !defined(POLARSSL_X509_CREATE_C) ) #error "POLARSSL_X509_CRT_WRITE_C defined, but not all prerequisites" #endif #if defined(POLARSSL_X509_CSR_WRITE_C) && ( !defined(POLARSSL_X509_CREATE_C) ) #error "POLARSSL_X509_CSR_WRITE_C defined, but not all prerequisites" #endif #endif /* config.h */