#!/bin/sh # Test various options that are not covered by compat.sh # # Here the goal is not to cover every ciphersuite/version, but # rather specific options (max fragment length, truncated hmac, etc) # or procedures (session resumption from cache or ticket, renego, etc). # # Assumes a build with default options. set -u # default values, can be overriden by the environment : ${P_SRV:=../programs/ssl/ssl_server2} : ${P_CLI:=../programs/ssl/ssl_client2} : ${P_PXY:=../programs/test/udp_proxy} : ${OPENSSL_CMD:=openssl} # OPENSSL would conflict with the build system : ${GNUTLS_CLI:=gnutls-cli} : ${GNUTLS_SERV:=gnutls-serv} O_SRV="$OPENSSL_CMD s_server -www -cert data_files/server5.crt -key data_files/server5.key" O_CLI="echo 'GET / HTTP/1.0' | $OPENSSL_CMD s_client" G_SRV="$GNUTLS_SERV --x509certfile data_files/server5.crt --x509keyfile data_files/server5.key" G_CLI="echo 'GET / HTTP/1.0' | $GNUTLS_CLI --x509cafile data_files/test-ca_cat12.crt" TESTS=0 FAILS=0 SKIPS=0 CONFIG_H='../include/polarssl/config.h' MEMCHECK=0 FILTER='.*' EXCLUDE='^$' print_usage() { echo "Usage: $0 [options]" printf " -h|--help\tPrint this help.\n" printf " -m|--memcheck\tCheck memory leaks and errors.\n" printf " -f|--filter\tOnly matching tests are executed (default: '$FILTER')\n" printf " -e|--exclude\tMatching tests are excluded (default: '$EXCLUDE')\n" } get_options() { while [ $# -gt 0 ]; do case "$1" in -f|--filter) shift; FILTER=$1 ;; -e|--exclude) shift; EXCLUDE=$1 ;; -m|--memcheck) MEMCHECK=1 ;; -h|--help) print_usage exit 0 ;; *) echo "Unknown argument: '$1'" print_usage exit 1 ;; esac shift done } # skip next test if OpenSSL can't send SSLv2 ClientHello requires_openssl_with_sslv2() { if [ -z "${OPENSSL_HAS_SSL2:-}" ]; then if $OPENSSL_CMD ciphers -ssl2 >/dev/null 2>&1; then OPENSSL_HAS_SSL2="YES" else OPENSSL_HAS_SSL2="NO" fi fi if [ "$OPENSSL_HAS_SSL2" = "NO" ]; then SKIP_NEXT="YES" fi } # skip next test if OpenSSL doesn't support FALLBACK_SCSV requires_openssl_with_fallback_scsv() { if [ -z "${OPENSSL_HAS_FBSCSV:-}" ]; then if $OPENSSL_CMD s_client -help 2>&1 | grep fallback_scsv >/dev/null then OPENSSL_HAS_FBSCSV="YES" else OPENSSL_HAS_FBSCSV="NO" fi fi if [ "$OPENSSL_HAS_FBSCSV" = "NO" ]; then SKIP_NEXT="YES" fi } # skip next test if GnuTLS isn't available requires_gnutls() { if [ -z "${GNUTLS_AVAILABLE:-}" ]; then if ( which "$GNUTLS_CLI" && which "$GNUTLS_SERV" ) >/dev/null; then GNUTLS_AVAILABLE="YES" else GNUTLS_AVAILABLE="NO" fi fi if [ "$GNUTLS_AVAILABLE" = "NO" ]; then SKIP_NEXT="YES" fi } # skip next test if IPv6 isn't available on this host requires_ipv6() { if [ -z "${HAS_IPV6:-}" ]; then $P_SRV server_addr='::1' > $SRV_OUT 2>&1 & SRV_PID=$! sleep 1 kill $SRV_PID >/dev/null 2>&1 if grep "NET - Binding of the socket failed" $SRV_OUT >/dev/null; then HAS_IPV6="NO" else HAS_IPV6="YES" fi rm -r $SRV_OUT fi if [ "$HAS_IPV6" = "NO" ]; then SKIP_NEXT="YES" fi } # skip the next test if valgrind is in use not_with_valgrind() { if [ "$MEMCHECK" -gt 0 ]; then SKIP_NEXT="YES" fi } # multiply the client timeout delay by the given factor for the next test needs_more_time() { CLI_DELAY_FACTOR=$1 } # print_name print_name() { printf "$1 " LEN=$(( 72 - `echo "$1" | wc -c` )) for i in `seq 1 $LEN`; do printf '.'; done printf ' ' TESTS=$(( $TESTS + 1 )) } # fail fail() { echo "FAIL" echo " ! $1" mv $SRV_OUT o-srv-${TESTS}.log mv $CLI_OUT o-cli-${TESTS}.log if [ -n "$PXY_CMD" ]; then mv $PXY_OUT o-pxy-${TESTS}.log fi echo " ! outputs saved to o-XXX-${TESTS}.log" if [ "X${USER:-}" = Xbuildbot -o "X${LOGNAME:-}" = Xbuildbot ]; then echo " ! server output:" cat o-srv-${TESTS}.log echo " ! ========================================================" echo " ! client output:" cat o-cli-${TESTS}.log if [ -n "$PXY_CMD" ]; then echo " ! ========================================================" echo " ! proxy output:" cat o-pxy-${TESTS}.log fi echo "" fi FAILS=$(( $FAILS + 1 )) } # is_polar is_polar() { echo "$1" | grep 'ssl_server2\|ssl_client2' > /dev/null } # openssl s_server doesn't have -www with DTLS check_osrv_dtls() { if echo "$SRV_CMD" | grep 's_server.*-dtls' >/dev/null; then NEEDS_INPUT=1 SRV_CMD="$( echo $SRV_CMD | sed s/-www// )" else NEEDS_INPUT=0 fi } # provide input to commands that need it provide_input() { if [ $NEEDS_INPUT -eq 0 ]; then return fi while true; do echo "HTTP/1.0 200 OK" sleep 1 done } # has_mem_err has_mem_err() { if ( grep -F 'All heap blocks were freed -- no leaks are possible' "$1" && grep -F 'ERROR SUMMARY: 0 errors from 0 contexts' "$1" ) > /dev/null then return 1 # false: does not have errors else return 0 # true: has errors fi } # wait for server to start: two versions depending on lsof availability wait_server_start() { if which lsof >/dev/null; then # make sure we don't loop forever ( sleep "$DOG_DELAY"; echo "SERVERSTART TIMEOUT"; kill $MAIN_PID ) & DOG_PID=$! # make a tight loop, server usually takes less than 1 sec to start if [ "$DTLS" -eq 1 ]; then until lsof -nbi UDP:"$SRV_PORT" 2>/dev/null | grep UDP >/dev/null; do :; done else until lsof -nbi TCP:"$SRV_PORT" 2>/dev/null | grep LISTEN >/dev/null; do :; done fi kill $DOG_PID >/dev/null 2>&1 wait $DOG_PID else sleep "$START_DELAY" fi } # wait for client to terminate and set CLI_EXIT # must be called right after starting the client wait_client_done() { CLI_PID=$! CLI_DELAY=$(( $DOG_DELAY * $CLI_DELAY_FACTOR )) CLI_DELAY_FACTOR=1 ( sleep $CLI_DELAY; echo "TIMEOUT" >> $CLI_OUT; kill $CLI_PID ) & DOG_PID=$! wait $CLI_PID CLI_EXIT=$? kill $DOG_PID >/dev/null 2>&1 wait $DOG_PID echo "EXIT: $CLI_EXIT" >> $CLI_OUT } # check if the given command uses dtls and sets global variable DTLS detect_dtls() { if echo "$1" | grep 'dtls=1\|-dtls1\|-u' >/dev/null; then DTLS=1 else DTLS=0 fi } # Usage: run_test name [-p proxy_cmd] srv_cmd cli_cmd cli_exit [option [...]] # Options: -s pattern pattern that must be present in server output # -c pattern pattern that must be present in client output # -S pattern pattern that must be absent in server output # -C pattern pattern that must be absent in client output run_test() { NAME="$1" shift 1 if echo "$NAME" | grep "$FILTER" | grep -v "$EXCLUDE" >/dev/null; then : else SKIP_NEXT="NO" return fi print_name "$NAME" # should we skip? if [ "X$SKIP_NEXT" = "XYES" ]; then SKIP_NEXT="NO" echo "SKIP" SKIPS=$(( $SKIPS + 1 )) return fi # does this test use a proxy? if [ "X$1" = "X-p" ]; then PXY_CMD="$2" shift 2 else PXY_CMD="" fi # get commands and client output SRV_CMD="$1" CLI_CMD="$2" CLI_EXPECT="$3" shift 3 # fix client port if [ -n "$PXY_CMD" ]; then CLI_CMD=$( echo "$CLI_CMD" | sed s/+SRV_PORT/$PXY_PORT/g ) else CLI_CMD=$( echo "$CLI_CMD" | sed s/+SRV_PORT/$SRV_PORT/g ) fi # update DTLS variable detect_dtls "$SRV_CMD" # prepend valgrind to our commands if active if [ "$MEMCHECK" -gt 0 ]; then if is_polar "$SRV_CMD"; then SRV_CMD="valgrind --leak-check=full $SRV_CMD" fi if is_polar "$CLI_CMD"; then CLI_CMD="valgrind --leak-check=full $CLI_CMD" fi fi # run the commands if [ -n "$PXY_CMD" ]; then echo "$PXY_CMD" > $PXY_OUT $PXY_CMD >> $PXY_OUT 2>&1 & PXY_PID=$! # assume proxy starts faster than server fi check_osrv_dtls echo "$SRV_CMD" > $SRV_OUT provide_input | $SRV_CMD >> $SRV_OUT 2>&1 & SRV_PID=$! wait_server_start echo "$CLI_CMD" > $CLI_OUT eval "$CLI_CMD" >> $CLI_OUT 2>&1 & wait_client_done # terminate the server (and the proxy) kill $SRV_PID wait $SRV_PID if [ -n "$PXY_CMD" ]; then kill $PXY_PID >/dev/null 2>&1 wait $PXY_PID fi # check if the client and server went at least to the handshake stage # (useful to avoid tests with only negative assertions and non-zero # expected client exit to incorrectly succeed in case of catastrophic # failure) if is_polar "$SRV_CMD"; then if grep "Performing the SSL/TLS handshake" $SRV_OUT >/dev/null; then :; else fail "server or client failed to reach handshake stage" return fi fi if is_polar "$CLI_CMD"; then if grep "Performing the SSL/TLS handshake" $CLI_OUT >/dev/null; then :; else fail "server or client failed to reach handshake stage" return fi fi # check server exit code if [ $? != 0 ]; then fail "server fail" return fi # check client exit code if [ \( "$CLI_EXPECT" = 0 -a "$CLI_EXIT" != 0 \) -o \ \( "$CLI_EXPECT" != 0 -a "$CLI_EXIT" = 0 \) ] then fail "bad client exit code (expected $CLI_EXPECT, got $CLI_EXIT)" return fi # check other assertions # lines beginning with == are added by valgrind, ignore them while [ $# -gt 0 ] do case $1 in "-s") if grep -v '^==' $SRV_OUT | grep "$2" >/dev/null; then :; else fail "-s $2" return fi ;; "-c") if grep -v '^==' $CLI_OUT | grep "$2" >/dev/null; then :; else fail "-c $2" return fi ;; "-S") if grep -v '^==' $SRV_OUT | grep "$2" >/dev/null; then fail "-S $2" return fi ;; "-C") if grep -v '^==' $CLI_OUT | grep "$2" >/dev/null; then fail "-C $2" return fi ;; *) echo "Unknown test: $1" >&2 exit 1 esac shift 2 done # check valgrind's results if [ "$MEMCHECK" -gt 0 ]; then if is_polar "$SRV_CMD" && has_mem_err $SRV_OUT; then fail "Server has memory errors" return fi if is_polar "$CLI_CMD" && has_mem_err $CLI_OUT; then fail "Client has memory errors" return fi fi # if we're here, everything is ok echo "PASS" rm -f $SRV_OUT $CLI_OUT $PXY_OUT } cleanup() { rm -f $CLI_OUT $SRV_OUT $PXY_OUT $SESSION test -n "${SRV_PID:-}" && kill $SRV_PID >/dev/null 2>&1 test -n "${PXY_PID:-}" && kill $PXY_PID >/dev/null 2>&1 test -n "${CLI_PID:-}" && kill $CLI_PID >/dev/null 2>&1 test -n "${DOG_PID:-}" && kill $DOG_PID >/dev/null 2>&1 exit 1 } # # MAIN # get_options "$@" # sanity checks, avoid an avalanche of errors if [ ! -x "$P_SRV" ]; then echo "Command '$P_SRV' is not an executable file" exit 1 fi if [ ! -x "$P_CLI" ]; then echo "Command '$P_CLI' is not an executable file" exit 1 fi if [ ! -x "$P_PXY" ]; then echo "Command '$P_PXY' is not an executable file" exit 1 fi if which $OPENSSL_CMD >/dev/null 2>&1; then :; else echo "Command '$OPENSSL_CMD' not found" exit 1 fi # used by watchdog MAIN_PID="$$" # be more patient with valgrind if [ "$MEMCHECK" -gt 0 ]; then START_DELAY=3 DOG_DELAY=30 else START_DELAY=1 DOG_DELAY=10 fi CLI_DELAY_FACTOR=1 # Pick a "unique" server port in the range 10000-19999, and a proxy port PORT_BASE="0000$$" PORT_BASE="$( echo -n $PORT_BASE | tail -c 5 )" SRV_PORT="1$PORT_BASE" PXY_PORT="2$PORT_BASE" unset PORT_BASE # fix commands to use this port, force IPv4 while at it # +SRV_PORT will be replaced by either $SRV_PORT or $PXY_PORT later P_SRV="$P_SRV server_addr=127.0.0.1 server_port=$SRV_PORT" P_CLI="$P_CLI server_addr=127.0.0.1 server_port=+SRV_PORT" P_PXY="$P_PXY server_addr=127.0.0.1 server_port=$SRV_PORT listen_addr=127.0.0.1 listen_port=$PXY_PORT" O_SRV="$O_SRV -accept $SRV_PORT" O_CLI="$O_CLI -connect localhost:+SRV_PORT" G_SRV="$G_SRV -p $SRV_PORT" G_CLI="$G_CLI -p +SRV_PORT localhost" # Also pick a unique name for intermediate files SRV_OUT="srv_out.$$" CLI_OUT="cli_out.$$" PXY_OUT="pxy_out.$$" SESSION="session.$$" SKIP_NEXT="NO" trap cleanup INT TERM HUP # Basic test # Checks that: # - things work with all ciphersuites active (used with config-full in all.sh) # - the expected (highest security) parameters are selected # ("signature_algorithm ext: 6" means SHA-512 (highest common hash)) run_test "Default" \ "$P_SRV debug_level=3" \ "$P_CLI" \ 0 \ -s "Protocol is TLSv1.2" \ -s "Ciphersuite is TLS-ECDHE-ECDSA-WITH-AES-256-GCM-SHA384" \ -s "client hello v3, signature_algorithm ext: 6" \ -s "ECDHE curve: secp521r1" \ -S "error" \ -C "error" # Test for SSLv2 ClientHello requires_openssl_with_sslv2 run_test "SSLv2 ClientHello: reference" \ "$P_SRV debug_level=3" \ "$O_CLI -no_ssl2" \ 0 \ -S "parse client hello v2" \ -S "ssl_handshake returned" # Adding a SSL2-only suite makes OpenSSL client send SSLv2 ClientHello requires_openssl_with_sslv2 run_test "SSLv2 ClientHello: actual test" \ "$P_SRV debug_level=2" \ "$O_CLI -cipher 'DES-CBC-MD5:ALL'" \ 0 \ -s "parse client hello v2" \ -S "ssl_handshake returned" # Tests for Truncated HMAC extension run_test "Truncated HMAC: reference" \ "$P_SRV debug_level=4" \ "$P_CLI trunc_hmac=0 force_ciphersuite=TLS-RSA-WITH-AES-128-CBC-SHA" \ 0 \ -s "dumping 'computed mac' (20 bytes)" run_test "Truncated HMAC: actual test" \ "$P_SRV debug_level=4" \ "$P_CLI trunc_hmac=1 force_ciphersuite=TLS-RSA-WITH-AES-128-CBC-SHA" \ 0 \ -s "dumping 'computed mac' (10 bytes)" # Tests for Encrypt-then-MAC extension run_test "Encrypt then MAC: default" \ "$P_SRV debug_level=3 \ force_ciphersuite=TLS-RSA-WITH-AES-128-CBC-SHA" \ "$P_CLI debug_level=3" \ 0 \ -c "client hello, adding encrypt_then_mac extension" \ -s "found encrypt then mac extension" \ -s "server hello, adding encrypt then mac extension" \ -c "found encrypt_then_mac extension" \ -c "using encrypt then mac" \ -s "using encrypt then mac" run_test "Encrypt then MAC: client enabled, server disabled" \ "$P_SRV debug_level=3 etm=0 \ force_ciphersuite=TLS-RSA-WITH-AES-128-CBC-SHA" \ "$P_CLI debug_level=3 etm=1" \ 0 \ -c "client hello, adding encrypt_then_mac extension" \ -s "found encrypt then mac extension" \ -S "server hello, adding encrypt then mac extension" \ -C "found encrypt_then_mac extension" \ -C "using encrypt then mac" \ -S "using encrypt then mac" run_test "Encrypt then MAC: client enabled, aead cipher" \ "$P_SRV debug_level=3 etm=1 \ force_ciphersuite=TLS-RSA-WITH-AES-128-GCM-SHA256" \ "$P_CLI debug_level=3 etm=1" \ 0 \ -c "client hello, adding encrypt_then_mac extension" \ -s "found encrypt then mac extension" \ -S "server hello, adding encrypt then mac extension" \ -C "found encrypt_then_mac extension" \ -C "using encrypt then mac" \ -S "using encrypt then mac" run_test "Encrypt then MAC: client enabled, stream cipher" \ "$P_SRV debug_level=3 etm=1 \ force_ciphersuite=TLS-RSA-WITH-RC4-128-SHA" \ "$P_CLI debug_level=3 etm=1" \ 0 \ -c "client hello, adding encrypt_then_mac extension" \ -s "found encrypt then mac extension" \ -S "server hello, adding encrypt then mac extension" \ -C "found encrypt_then_mac extension" \ -C "using encrypt then mac" \ -S "using encrypt then mac" run_test "Encrypt then MAC: client disabled, server enabled" \ "$P_SRV debug_level=3 etm=1 \ force_ciphersuite=TLS-RSA-WITH-AES-128-CBC-SHA" \ "$P_CLI debug_level=3 etm=0" \ 0 \ -C "client hello, adding encrypt_then_mac extension" \ -S "found encrypt then mac extension" \ -S "server hello, adding encrypt then mac extension" \ -C "found encrypt_then_mac extension" \ -C "using encrypt then mac" \ -S "using encrypt then mac" run_test "Encrypt then MAC: client SSLv3, server enabled" \ "$P_SRV debug_level=3 \ force_ciphersuite=TLS-RSA-WITH-AES-128-CBC-SHA" \ "$P_CLI debug_level=3 force_version=ssl3" \ 0 \ -C "client hello, adding encrypt_then_mac extension" \ -S "found encrypt then mac extension" \ -S "server hello, adding encrypt then mac extension" \ -C "found encrypt_then_mac extension" \ -C "using encrypt then mac" \ -S "using encrypt then mac" run_test "Encrypt then MAC: client enabled, server SSLv3" \ "$P_SRV debug_level=3 force_version=ssl3 \ force_ciphersuite=TLS-RSA-WITH-AES-128-CBC-SHA" \ "$P_CLI debug_level=3" \ 0 \ -c "client hello, adding encrypt_then_mac extension" \ -s "found encrypt then mac extension" \ -S "server hello, adding encrypt then mac extension" \ -C "found encrypt_then_mac extension" \ -C "using encrypt then mac" \ -S "using encrypt then mac" # Tests for Extended Master Secret extension run_test "Extended Master Secret: default" \ "$P_SRV debug_level=3" \ "$P_CLI debug_level=3" \ 0 \ -c "client hello, adding extended_master_secret extension" \ -s "found extended master secret extension" \ -s "server hello, adding extended master secret extension" \ -c "found extended_master_secret extension" \ -c "using extended master secret" \ -s "using extended master secret" run_test "Extended Master Secret: client enabled, server disabled" \ "$P_SRV debug_level=3 extended_ms=0" \ "$P_CLI debug_level=3 extended_ms=1" \ 0 \ -c "client hello, adding extended_master_secret extension" \ -s "found extended master secret extension" \ -S "server hello, adding extended master secret extension" \ -C "found extended_master_secret extension" \ -C "using extended master secret" \ -S "using extended master secret" run_test "Extended Master Secret: client disabled, server enabled" \ "$P_SRV debug_level=3 extended_ms=1" \ "$P_CLI debug_level=3 extended_ms=0" \ 0 \ -C "client hello, adding extended_master_secret extension" \ -S "found extended master secret extension" \ -S "server hello, adding extended master secret extension" \ -C "found extended_master_secret extension" \ -C "using extended master secret" \ -S "using extended master secret" run_test "Extended Master Secret: client SSLv3, server enabled" \ "$P_SRV debug_level=3" \ "$P_CLI debug_level=3 force_version=ssl3" \ 0 \ -C "client hello, adding extended_master_secret extension" \ -S "found extended master secret extension" \ -S "server hello, adding extended master secret extension" \ -C "found extended_master_secret extension" \ -C "using extended master secret" \ -S "using extended master secret" run_test "Extended Master Secret: client enabled, server SSLv3" \ "$P_SRV debug_level=3 force_version=ssl3" \ "$P_CLI debug_level=3" \ 0 \ -c "client hello, adding extended_master_secret extension" \ -s "found extended master secret extension" \ -S "server hello, adding extended master secret extension" \ -C "found extended_master_secret extension" \ -C "using extended master secret" \ -S "using extended master secret" # Tests for FALLBACK_SCSV run_test "Fallback SCSV: default" \ "$P_SRV" \ "$P_CLI debug_level=3 force_version=tls1_1" \ 0 \ -C "adding FALLBACK_SCSV" \ -S "received FALLBACK_SCSV" \ -S "inapropriate fallback" \ -C "is a fatal alert message (msg 86)" run_test "Fallback SCSV: explicitly disabled" \ "$P_SRV" \ "$P_CLI debug_level=3 force_version=tls1_1 fallback=0" \ 0 \ -C "adding FALLBACK_SCSV" \ -S "received FALLBACK_SCSV" \ -S "inapropriate fallback" \ -C "is a fatal alert message (msg 86)" run_test "Fallback SCSV: enabled" \ "$P_SRV" \ "$P_CLI debug_level=3 force_version=tls1_1 fallback=1" \ 1 \ -c "adding FALLBACK_SCSV" \ -s "received FALLBACK_SCSV" \ -s "inapropriate fallback" \ -c "is a fatal alert message (msg 86)" run_test "Fallback SCSV: enabled, max version" \ "$P_SRV" \ "$P_CLI debug_level=3 fallback=1" \ 0 \ -c "adding FALLBACK_SCSV" \ -s "received FALLBACK_SCSV" \ -S "inapropriate fallback" \ -C "is a fatal alert message (msg 86)" requires_openssl_with_fallback_scsv run_test "Fallback SCSV: default, openssl server" \ "$O_SRV" \ "$P_CLI debug_level=3 force_version=tls1_1 fallback=0" \ 0 \ -C "adding FALLBACK_SCSV" \ -C "is a fatal alert message (msg 86)" requires_openssl_with_fallback_scsv run_test "Fallback SCSV: enabled, openssl server" \ "$O_SRV" \ "$P_CLI debug_level=3 force_version=tls1_1 fallback=1" \ 1 \ -c "adding FALLBACK_SCSV" \ -c "is a fatal alert message (msg 86)" requires_openssl_with_fallback_scsv run_test "Fallback SCSV: disabled, openssl client" \ "$P_SRV" \ "$O_CLI -tls1_1" \ 0 \ -S "received FALLBACK_SCSV" \ -S "inapropriate fallback" requires_openssl_with_fallback_scsv run_test "Fallback SCSV: enabled, openssl client" \ "$P_SRV" \ "$O_CLI -tls1_1 -fallback_scsv" \ 1 \ -s "received FALLBACK_SCSV" \ -s "inapropriate fallback" requires_openssl_with_fallback_scsv run_test "Fallback SCSV: enabled, max version, openssl client" \ "$P_SRV" \ "$O_CLI -fallback_scsv" \ 0 \ -s "received FALLBACK_SCSV" \ -S "inapropriate fallback" # Tests for CBC 1/n-1 record splitting run_test "CBC Record splitting: TLS 1.2, no splitting" \ "$P_SRV" \ "$P_CLI force_ciphersuite=TLS-RSA-WITH-AES-128-CBC-SHA \ request_size=123 force_version=tls1_2" \ 0 \ -s "Read from client: 123 bytes read" \ -S "Read from client: 1 bytes read" \ -S "122 bytes read" run_test "CBC Record splitting: TLS 1.1, no splitting" \ "$P_SRV" \ "$P_CLI force_ciphersuite=TLS-RSA-WITH-AES-128-CBC-SHA \ request_size=123 force_version=tls1_1" \ 0 \ -s "Read from client: 123 bytes read" \ -S "Read from client: 1 bytes read" \ -S "122 bytes read" run_test "CBC Record splitting: TLS 1.0, splitting" \ "$P_SRV" \ "$P_CLI force_ciphersuite=TLS-RSA-WITH-AES-128-CBC-SHA \ request_size=123 force_version=tls1" \ 0 \ -S "Read from client: 123 bytes read" \ -s "Read from client: 1 bytes read" \ -s "122 bytes read" run_test "CBC Record splitting: SSLv3, splitting" \ "$P_SRV" \ "$P_CLI force_ciphersuite=TLS-RSA-WITH-AES-128-CBC-SHA \ request_size=123 force_version=ssl3" \ 0 \ -S "Read from client: 123 bytes read" \ -s "Read from client: 1 bytes read" \ -s "122 bytes read" run_test "CBC Record splitting: TLS 1.0 RC4, no splitting" \ "$P_SRV" \ "$P_CLI force_ciphersuite=TLS-RSA-WITH-RC4-128-SHA \ request_size=123 force_version=tls1" \ 0 \ -s "Read from client: 123 bytes read" \ -S "Read from client: 1 bytes read" \ -S "122 bytes read" run_test "CBC Record splitting: TLS 1.0, splitting disabled" \ "$P_SRV" \ "$P_CLI force_ciphersuite=TLS-RSA-WITH-AES-128-CBC-SHA \ request_size=123 force_version=tls1 recsplit=0" \ 0 \ -s "Read from client: 123 bytes read" \ -S "Read from client: 1 bytes read" \ -S "122 bytes read" # Tests for Session Tickets run_test "Session resume using tickets: basic" \ "$P_SRV debug_level=3 tickets=1" \ "$P_CLI debug_level=3 tickets=1 reconnect=1" \ 0 \ -c "client hello, adding session ticket extension" \ -s "found session ticket extension" \ -s "server hello, adding session ticket extension" \ -c "found session_ticket extension" \ -c "parse new session ticket" \ -S "session successfully restored from cache" \ -s "session successfully restored from ticket" \ -s "a session has been resumed" \ -c "a session has been resumed" run_test "Session resume using tickets: cache disabled" \ "$P_SRV debug_level=3 tickets=1 cache_max=0" \ "$P_CLI debug_level=3 tickets=1 reconnect=1" \ 0 \ -c "client hello, adding session ticket extension" \ -s "found session ticket extension" \ -s "server hello, adding session ticket extension" \ -c "found session_ticket extension" \ -c "parse new session ticket" \ -S "session successfully restored from cache" \ -s "session successfully restored from ticket" \ -s "a session has been resumed" \ -c "a session has been resumed" run_test "Session resume using tickets: timeout" \ "$P_SRV debug_level=3 tickets=1 cache_max=0 ticket_timeout=1" \ "$P_CLI debug_level=3 tickets=1 reconnect=1 reco_delay=2" \ 0 \ -c "client hello, adding session ticket extension" \ -s "found session ticket extension" \ -s "server hello, adding session ticket extension" \ -c "found session_ticket extension" \ -c "parse new session ticket" \ -S "session successfully restored from cache" \ -S "session successfully restored from ticket" \ -S "a session has been resumed" \ -C "a session has been resumed" run_test "Session resume using tickets: openssl server" \ "$O_SRV" \ "$P_CLI debug_level=3 tickets=1 reconnect=1" \ 0 \ -c "client hello, adding session ticket extension" \ -c "found session_ticket extension" \ -c "parse new session ticket" \ -c "a session has been resumed" run_test "Session resume using tickets: openssl client" \ "$P_SRV debug_level=3 tickets=1" \ "( $O_CLI -sess_out $SESSION; \ $O_CLI -sess_in $SESSION; \ rm -f $SESSION )" \ 0 \ -s "found session ticket extension" \ -s "server hello, adding session ticket extension" \ -S "session successfully restored from cache" \ -s "session successfully restored from ticket" \ -s "a session has been resumed" # Tests for Session Resume based on session-ID and cache run_test "Session resume using cache: tickets enabled on client" \ "$P_SRV debug_level=3 tickets=0" \ "$P_CLI debug_level=3 tickets=1 reconnect=1" \ 0 \ -c "client hello, adding session ticket extension" \ -s "found session ticket extension" \ -S "server hello, adding session ticket extension" \ -C "found session_ticket extension" \ -C "parse new session ticket" \ -s "session successfully restored from cache" \ -S "session successfully restored from ticket" \ -s "a session has been resumed" \ -c "a session has been resumed" run_test "Session resume using cache: tickets enabled on server" \ "$P_SRV debug_level=3 tickets=1" \ "$P_CLI debug_level=3 tickets=0 reconnect=1" \ 0 \ -C "client hello, adding session ticket extension" \ -S "found session ticket extension" \ -S "server hello, adding session ticket extension" \ -C "found session_ticket extension" \ -C "parse new session ticket" \ -s "session successfully restored from cache" \ -S "session successfully restored from ticket" \ -s "a session has been resumed" \ -c "a session has been resumed" run_test "Session resume using cache: cache_max=0" \ "$P_SRV debug_level=3 tickets=0 cache_max=0" \ "$P_CLI debug_level=3 tickets=0 reconnect=1" \ 0 \ -S "session successfully restored from cache" \ -S "session successfully restored from ticket" \ -S "a session has been resumed" \ -C "a session has been resumed" run_test "Session resume using cache: cache_max=1" \ "$P_SRV debug_level=3 tickets=0 cache_max=1" \ "$P_CLI debug_level=3 tickets=0 reconnect=1" \ 0 \ -s "session successfully restored from cache" \ -S "session successfully restored from ticket" \ -s "a session has been resumed" \ -c "a session has been resumed" run_test "Session resume using cache: timemout > delay" \ "$P_SRV debug_level=3 tickets=0" \ "$P_CLI debug_level=3 tickets=0 reconnect=1 reco_delay=0" \ 0 \ -s "session successfully restored from cache" \ -S "session successfully restored from ticket" \ -s "a session has been resumed" \ -c "a session has been resumed" run_test "Session resume using cache: timeout < delay" \ "$P_SRV debug_level=3 tickets=0 cache_timeout=1" \ "$P_CLI debug_level=3 tickets=0 reconnect=1 reco_delay=2" \ 0 \ -S "session successfully restored from cache" \ -S "session successfully restored from ticket" \ -S "a session has been resumed" \ -C "a session has been resumed" run_test "Session resume using cache: no timeout" \ "$P_SRV debug_level=3 tickets=0 cache_timeout=0" \ "$P_CLI debug_level=3 tickets=0 reconnect=1 reco_delay=2" \ 0 \ -s "session successfully restored from cache" \ -S "session successfully restored from ticket" \ -s "a session has been resumed" \ -c "a session has been resumed" run_test "Session resume using cache: openssl client" \ "$P_SRV debug_level=3 tickets=0" \ "( $O_CLI -sess_out $SESSION; \ $O_CLI -sess_in $SESSION; \ rm -f $SESSION )" \ 0 \ -s "found session ticket extension" \ -S "server hello, adding session ticket extension" \ -s "session successfully restored from cache" \ -S "session successfully restored from ticket" \ -s "a session has been resumed" run_test "Session resume using cache: openssl server" \ "$O_SRV" \ "$P_CLI debug_level=3 tickets=0 reconnect=1" \ 0 \ -C "found session_ticket extension" \ -C "parse new session ticket" \ -c "a session has been resumed" # Tests for Max Fragment Length extension run_test "Max fragment length: not used, reference" \ "$P_SRV debug_level=3" \ "$P_CLI debug_level=3" \ 0 \ -C "client hello, adding max_fragment_length extension" \ -S "found max fragment length extension" \ -S "server hello, max_fragment_length extension" \ -C "found max_fragment_length extension" run_test "Max fragment length: used by client" \ "$P_SRV debug_level=3" \ "$P_CLI debug_level=3 max_frag_len=4096" \ 0 \ -c "client hello, adding max_fragment_length extension" \ -s "found max fragment length extension" \ -s "server hello, max_fragment_length extension" \ -c "found max_fragment_length extension" run_test "Max fragment length: used by server" \ "$P_SRV debug_level=3 max_frag_len=4096" \ "$P_CLI debug_level=3" \ 0 \ -C "client hello, adding max_fragment_length extension" \ -S "found max fragment length extension" \ -S "server hello, max_fragment_length extension" \ -C "found max_fragment_length extension" requires_gnutls run_test "Max fragment length: gnutls server" \ "$G_SRV" \ "$P_CLI debug_level=3 max_frag_len=4096" \ 0 \ -c "client hello, adding max_fragment_length extension" \ -c "found max_fragment_length extension" run_test "Max fragment length: client, message just fits" \ "$P_SRV debug_level=3" \ "$P_CLI debug_level=3 max_frag_len=2048 request_size=2048" \ 0 \ -c "client hello, adding max_fragment_length extension" \ -s "found max fragment length extension" \ -s "server hello, max_fragment_length extension" \ -c "found max_fragment_length extension" \ -c "2048 bytes written in 1 fragments" \ -s "2048 bytes read" run_test "Max fragment length: client, larger message" \ "$P_SRV debug_level=3" \ "$P_CLI debug_level=3 max_frag_len=2048 request_size=2345" \ 0 \ -c "client hello, adding max_fragment_length extension" \ -s "found max fragment length extension" \ -s "server hello, max_fragment_length extension" \ -c "found max_fragment_length extension" \ -c "2345 bytes written in 2 fragments" \ -s "2048 bytes read" \ -s "297 bytes read" run_test "Max fragment length: client, larger message" \ "$P_SRV debug_level=3 dtls=1" \ "$P_CLI debug_level=3 dtls=1 max_frag_len=2048 request_size=2345" \ 1 \ -c "client hello, adding max_fragment_length extension" \ -s "found max fragment length extension" \ -s "server hello, max_fragment_length extension" \ -c "found max_fragment_length extension" \ -c "fragment larger than.*maximum" # Tests for renegotiation run_test "Renegotiation: none, for reference" \ "$P_SRV debug_level=3 exchanges=2" \ "$P_CLI debug_level=3 exchanges=2" \ 0 \ -C "client hello, adding renegotiation extension" \ -s "received TLS_EMPTY_RENEGOTIATION_INFO" \ -S "found renegotiation extension" \ -s "server hello, secure renegotiation extension" \ -c "found renegotiation extension" \ -C "=> renegotiate" \ -S "=> renegotiate" \ -S "write hello request" run_test "Renegotiation: client-initiated" \ "$P_SRV debug_level=3 exchanges=2 renegotiation=1" \ "$P_CLI debug_level=3 exchanges=2 renegotiation=1 renegotiate=1" \ 0 \ -c "client hello, adding renegotiation extension" \ -s "received TLS_EMPTY_RENEGOTIATION_INFO" \ -s "found renegotiation extension" \ -s "server hello, secure renegotiation extension" \ -c "found renegotiation extension" \ -c "=> renegotiate" \ -s "=> renegotiate" \ -S "write hello request" run_test "Renegotiation: server-initiated" \ "$P_SRV debug_level=3 exchanges=2 renegotiation=1 renegotiate=1" \ "$P_CLI debug_level=3 exchanges=2 renegotiation=1" \ 0 \ -c "client hello, adding renegotiation extension" \ -s "received TLS_EMPTY_RENEGOTIATION_INFO" \ -s "found renegotiation extension" \ -s "server hello, secure renegotiation extension" \ -c "found renegotiation extension" \ -c "=> renegotiate" \ -s "=> renegotiate" \ -s "write hello request" run_test "Renegotiation: double" \ "$P_SRV debug_level=3 exchanges=2 renegotiation=1 renegotiate=1" \ "$P_CLI debug_level=3 exchanges=2 renegotiation=1 renegotiate=1" \ 0 \ -c "client hello, adding renegotiation extension" \ -s "received TLS_EMPTY_RENEGOTIATION_INFO" \ -s "found renegotiation extension" \ -s "server hello, secure renegotiation extension" \ -c "found renegotiation extension" \ -c "=> renegotiate" \ -s "=> renegotiate" \ -s "write hello request" run_test "Renegotiation: client-initiated, server-rejected" \ "$P_SRV debug_level=3 exchanges=2 renegotiation=0" \ "$P_CLI debug_level=3 exchanges=2 renegotiation=1 renegotiate=1" \ 1 \ -c "client hello, adding renegotiation extension" \ -s "received TLS_EMPTY_RENEGOTIATION_INFO" \ -S "found renegotiation extension" \ -s "server hello, secure renegotiation extension" \ -c "found renegotiation extension" \ -c "=> renegotiate" \ -S "=> renegotiate" \ -S "write hello request" \ -c "SSL - Unexpected message at ServerHello in renegotiation" \ -c "failed" run_test "Renegotiation: server-initiated, client-rejected, default" \ "$P_SRV debug_level=3 exchanges=2 renegotiation=1 renegotiate=1" \ "$P_CLI debug_level=3 exchanges=2 renegotiation=0" \ 0 \ -C "client hello, adding renegotiation extension" \ -s "received TLS_EMPTY_RENEGOTIATION_INFO" \ -S "found renegotiation extension" \ -s "server hello, secure renegotiation extension" \ -c "found renegotiation extension" \ -C "=> renegotiate" \ -S "=> renegotiate" \ -s "write hello request" \ -S "SSL - An unexpected message was received from our peer" \ -S "failed" run_test "Renegotiation: server-initiated, client-rejected, not enforced" \ "$P_SRV debug_level=3 exchanges=2 renegotiation=1 renegotiate=1 \ renego_delay=-1" \ "$P_CLI debug_level=3 exchanges=2 renegotiation=0" \ 0 \ -C "client hello, adding renegotiation extension" \ -s "received TLS_EMPTY_RENEGOTIATION_INFO" \ -S "found renegotiation extension" \ -s "server hello, secure renegotiation extension" \ -c "found renegotiation extension" \ -C "=> renegotiate" \ -S "=> renegotiate" \ -s "write hello request" \ -S "SSL - An unexpected message was received from our peer" \ -S "failed" # delay 2 for 1 alert record + 1 application data record run_test "Renegotiation: server-initiated, client-rejected, delay 2" \ "$P_SRV debug_level=3 exchanges=2 renegotiation=1 renegotiate=1 \ renego_delay=2" \ "$P_CLI debug_level=3 exchanges=2 renegotiation=0" \ 0 \ -C "client hello, adding renegotiation extension" \ -s "received TLS_EMPTY_RENEGOTIATION_INFO" \ -S "found renegotiation extension" \ -s "server hello, secure renegotiation extension" \ -c "found renegotiation extension" \ -C "=> renegotiate" \ -S "=> renegotiate" \ -s "write hello request" \ -S "SSL - An unexpected message was received from our peer" \ -S "failed" run_test "Renegotiation: server-initiated, client-rejected, delay 0" \ "$P_SRV debug_level=3 exchanges=2 renegotiation=1 renegotiate=1 \ renego_delay=0" \ "$P_CLI debug_level=3 exchanges=2 renegotiation=0" \ 0 \ -C "client hello, adding renegotiation extension" \ -s "received TLS_EMPTY_RENEGOTIATION_INFO" \ -S "found renegotiation extension" \ -s "server hello, secure renegotiation extension" \ -c "found renegotiation extension" \ -C "=> renegotiate" \ -S "=> renegotiate" \ -s "write hello request" \ -s "SSL - An unexpected message was received from our peer" run_test "Renegotiation: server-initiated, client-accepted, delay 0" \ "$P_SRV debug_level=3 exchanges=2 renegotiation=1 renegotiate=1 \ renego_delay=0" \ "$P_CLI debug_level=3 exchanges=2 renegotiation=1" \ 0 \ -c "client hello, adding renegotiation extension" \ -s "received TLS_EMPTY_RENEGOTIATION_INFO" \ -s "found renegotiation extension" \ -s "server hello, secure renegotiation extension" \ -c "found renegotiation extension" \ -c "=> renegotiate" \ -s "=> renegotiate" \ -s "write hello request" \ -S "SSL - An unexpected message was received from our peer" \ -S "failed" run_test "Renegotiation: periodic, just below period" \ "$P_SRV debug_level=3 exchanges=9 renegotiation=1 renego_period=3" \ "$P_CLI debug_level=3 exchanges=2 renegotiation=1" \ 0 \ -C "client hello, adding renegotiation extension" \ -s "received TLS_EMPTY_RENEGOTIATION_INFO" \ -S "found renegotiation extension" \ -s "server hello, secure renegotiation extension" \ -c "found renegotiation extension" \ -S "record counter limit reached: renegotiate" \ -C "=> renegotiate" \ -S "=> renegotiate" \ -S "write hello request" \ -S "SSL - An unexpected message was received from our peer" \ -S "failed" run_test "Renegotiation: periodic, just above period" \ "$P_SRV debug_level=3 exchanges=9 renegotiation=1 renego_period=3" \ "$P_CLI debug_level=3 exchanges=3 renegotiation=1" \ 0 \ -c "client hello, adding renegotiation extension" \ -s "received TLS_EMPTY_RENEGOTIATION_INFO" \ -s "found renegotiation extension" \ -s "server hello, secure renegotiation extension" \ -c "found renegotiation extension" \ -s "record counter limit reached: renegotiate" \ -c "=> renegotiate" \ -s "=> renegotiate" \ -s "write hello request" \ -S "SSL - An unexpected message was received from our peer" \ -S "failed" run_test "Renegotiation: periodic, two times period" \ "$P_SRV debug_level=3 exchanges=9 renegotiation=1 renego_period=3" \ "$P_CLI debug_level=3 exchanges=6 renegotiation=1" \ 0 \ -c "client hello, adding renegotiation extension" \ -s "received TLS_EMPTY_RENEGOTIATION_INFO" \ -s "found renegotiation extension" \ -s "server hello, secure renegotiation extension" \ -c "found renegotiation extension" \ -s "record counter limit reached: renegotiate" \ -c "=> renegotiate" \ -s "=> renegotiate" \ -s "write hello request" \ -S "SSL - An unexpected message was received from our peer" \ -S "failed" run_test "Renegotiation: periodic, above period, disabled" \ "$P_SRV debug_level=3 exchanges=9 renegotiation=0 renego_period=3" \ "$P_CLI debug_level=3 exchanges=4 renegotiation=1" \ 0 \ -C "client hello, adding renegotiation extension" \ -s "received TLS_EMPTY_RENEGOTIATION_INFO" \ -S "found renegotiation extension" \ -s "server hello, secure renegotiation extension" \ -c "found renegotiation extension" \ -S "record counter limit reached: renegotiate" \ -C "=> renegotiate" \ -S "=> renegotiate" \ -S "write hello request" \ -S "SSL - An unexpected message was received from our peer" \ -S "failed" run_test "Renegotiation: nbio, client-initiated" \ "$P_SRV debug_level=3 nbio=2 exchanges=2 renegotiation=1" \ "$P_CLI debug_level=3 nbio=2 exchanges=2 renegotiation=1 renegotiate=1" \ 0 \ -c "client hello, adding renegotiation extension" \ -s "received TLS_EMPTY_RENEGOTIATION_INFO" \ -s "found renegotiation extension" \ -s "server hello, secure renegotiation extension" \ -c "found renegotiation extension" \ -c "=> renegotiate" \ -s "=> renegotiate" \ -S "write hello request" run_test "Renegotiation: nbio, server-initiated" \ "$P_SRV debug_level=3 nbio=2 exchanges=2 renegotiation=1 renegotiate=1" \ "$P_CLI debug_level=3 nbio=2 exchanges=2 renegotiation=1" \ 0 \ -c "client hello, adding renegotiation extension" \ -s "received TLS_EMPTY_RENEGOTIATION_INFO" \ -s "found renegotiation extension" \ -s "server hello, secure renegotiation extension" \ -c "found renegotiation extension" \ -c "=> renegotiate" \ -s "=> renegotiate" \ -s "write hello request" run_test "Renegotiation: openssl server, client-initiated" \ "$O_SRV -www" \ "$P_CLI debug_level=3 exchanges=1 renegotiation=1 renegotiate=1" \ 0 \ -c "client hello, adding renegotiation extension" \ -c "found renegotiation extension" \ -c "=> renegotiate" \ -C "ssl_hanshake() returned" \ -C "error" \ -c "HTTP/1.0 200 [Oo][Kk]" run_test "Renegotiation: gnutls server strict, client-initiated" \ "$G_SRV --priority=NORMAL:%SAFE_RENEGOTIATION" \ "$P_CLI debug_level=3 exchanges=1 renegotiation=1 renegotiate=1" \ 0 \ -c "client hello, adding renegotiation extension" \ -c "found renegotiation extension" \ -c "=> renegotiate" \ -C "ssl_hanshake() returned" \ -C "error" \ -c "HTTP/1.0 200 [Oo][Kk]" run_test "Renegotiation: gnutls server unsafe, client-initiated default" \ "$G_SRV --priority=NORMAL:%DISABLE_SAFE_RENEGOTIATION" \ "$P_CLI debug_level=3 exchanges=1 renegotiation=1 renegotiate=1" \ 1 \ -c "client hello, adding renegotiation extension" \ -C "found renegotiation extension" \ -c "=> renegotiate" \ -c "ssl_handshake() returned" \ -c "error" \ -C "HTTP/1.0 200 [Oo][Kk]" run_test "Renegotiation: gnutls server unsafe, client-inititated no legacy" \ "$G_SRV --priority=NORMAL:%DISABLE_SAFE_RENEGOTIATION" \ "$P_CLI debug_level=3 exchanges=1 renegotiation=1 renegotiate=1 \ allow_legacy=0" \ 1 \ -c "client hello, adding renegotiation extension" \ -C "found renegotiation extension" \ -c "=> renegotiate" \ -c "ssl_handshake() returned" \ -c "error" \ -C "HTTP/1.0 200 [Oo][Kk]" run_test "Renegotiation: gnutls server unsafe, client-inititated legacy" \ "$G_SRV --priority=NORMAL:%DISABLE_SAFE_RENEGOTIATION" \ "$P_CLI debug_level=3 exchanges=1 renegotiation=1 renegotiate=1 \ allow_legacy=1" \ 0 \ -c "client hello, adding renegotiation extension" \ -C "found renegotiation extension" \ -c "=> renegotiate" \ -C "ssl_hanshake() returned" \ -C "error" \ -c "HTTP/1.0 200 [Oo][Kk]" run_test "Renegotiation: DTLS, client-initiated" \ "$P_SRV debug_level=3 dtls=1 exchanges=2 renegotiation=1" \ "$P_CLI debug_level=3 dtls=1 exchanges=2 renegotiation=1 renegotiate=1" \ 0 \ -c "client hello, adding renegotiation extension" \ -s "received TLS_EMPTY_RENEGOTIATION_INFO" \ -s "found renegotiation extension" \ -s "server hello, secure renegotiation extension" \ -c "found renegotiation extension" \ -c "=> renegotiate" \ -s "=> renegotiate" \ -S "write hello request" run_test "Renegotiation: DTLS, server-initiated" \ "$P_SRV debug_level=3 dtls=1 exchanges=2 renegotiation=1 renegotiate=1" \ "$P_CLI debug_level=3 dtls=1 exchanges=2 renegotiation=1 \ read_timeout=1000 max_resend=2" \ 0 \ -c "client hello, adding renegotiation extension" \ -s "received TLS_EMPTY_RENEGOTIATION_INFO" \ -s "found renegotiation extension" \ -s "server hello, secure renegotiation extension" \ -c "found renegotiation extension" \ -c "=> renegotiate" \ -s "=> renegotiate" \ -s "write hello request" run_test "Renegotiation: DTLS, gnutls server, client-initiated" \ "$G_SRV -u --mtu 4096" \ "$P_CLI debug_level=3 dtls=1 exchanges=1 renegotiation=1 renegotiate=1" \ 0 \ -c "client hello, adding renegotiation extension" \ -c "found renegotiation extension" \ -c "=> renegotiate" \ -C "ssl_handshake returned" \ -C "error" \ -s "Extra-header:" # Test for the "secure renegotation" extension only (no actual renegotiation) run_test "Renego ext: gnutls server strict, client default" \ "$G_SRV --priority=NORMAL:%SAFE_RENEGOTIATION" \ "$P_CLI debug_level=3" \ 0 \ -c "found renegotiation extension" \ -C "error" \ -c "HTTP/1.0 200 [Oo][Kk]" run_test "Renego ext: gnutls server unsafe, client default" \ "$G_SRV --priority=NORMAL:%DISABLE_SAFE_RENEGOTIATION" \ "$P_CLI debug_level=3" \ 0 \ -C "found renegotiation extension" \ -C "error" \ -c "HTTP/1.0 200 [Oo][Kk]" run_test "Renego ext: gnutls server unsafe, client break legacy" \ "$G_SRV --priority=NORMAL:%DISABLE_SAFE_RENEGOTIATION" \ "$P_CLI debug_level=3 allow_legacy=-1" \ 1 \ -C "found renegotiation extension" \ -c "error" \ -C "HTTP/1.0 200 [Oo][Kk]" run_test "Renego ext: gnutls client strict, server default" \ "$P_SRV debug_level=3" \ "$G_CLI --priority=NORMAL:%SAFE_RENEGOTIATION" \ 0 \ -s "received TLS_EMPTY_RENEGOTIATION_INFO\|found renegotiation extension" \ -s "server hello, secure renegotiation extension" run_test "Renego ext: gnutls client unsafe, server default" \ "$P_SRV debug_level=3" \ "$G_CLI --priority=NORMAL:%DISABLE_SAFE_RENEGOTIATION" \ 0 \ -S "received TLS_EMPTY_RENEGOTIATION_INFO\|found renegotiation extension" \ -S "server hello, secure renegotiation extension" run_test "Renego ext: gnutls client unsafe, server break legacy" \ "$P_SRV debug_level=3 allow_legacy=-1" \ "$G_CLI --priority=NORMAL:%DISABLE_SAFE_RENEGOTIATION" \ 1 \ -S "received TLS_EMPTY_RENEGOTIATION_INFO\|found renegotiation extension" \ -S "server hello, secure renegotiation extension" # Tests for auth_mode run_test "Authentication: server badcert, client required" \ "$P_SRV crt_file=data_files/server5-badsign.crt \ key_file=data_files/server5.key" \ "$P_CLI debug_level=1 auth_mode=required" \ 1 \ -c "x509_verify_cert() returned" \ -c "! self-signed or not signed by a trusted CA" \ -c "! ssl_handshake returned" \ -c "X509 - Certificate verification failed" run_test "Authentication: server badcert, client optional" \ "$P_SRV crt_file=data_files/server5-badsign.crt \ key_file=data_files/server5.key" \ "$P_CLI debug_level=1 auth_mode=optional" \ 0 \ -c "x509_verify_cert() returned" \ -c "! self-signed or not signed by a trusted CA" \ -C "! ssl_handshake returned" \ -C "X509 - Certificate verification failed" run_test "Authentication: server badcert, client none" \ "$P_SRV crt_file=data_files/server5-badsign.crt \ key_file=data_files/server5.key" \ "$P_CLI debug_level=1 auth_mode=none" \ 0 \ -C "x509_verify_cert() returned" \ -C "! self-signed or not signed by a trusted CA" \ -C "! ssl_handshake returned" \ -C "X509 - Certificate verification failed" run_test "Authentication: client badcert, server required" \ "$P_SRV debug_level=3 auth_mode=required" \ "$P_CLI debug_level=3 crt_file=data_files/server5-badsign.crt \ key_file=data_files/server5.key" \ 1 \ -S "skip write certificate request" \ -C "skip parse certificate request" \ -c "got a certificate request" \ -C "skip write certificate" \ -C "skip write certificate verify" \ -S "skip parse certificate verify" \ -s "x509_verify_cert() returned" \ -S "! self-signed or not signed by a trusted CA" \ -s "! ssl_handshake returned" \ -c "! ssl_handshake returned" \ -s "X509 - Certificate verification failed" run_test "Authentication: client badcert, server optional" \ "$P_SRV debug_level=3 auth_mode=optional" \ "$P_CLI debug_level=3 crt_file=data_files/server5-badsign.crt \ key_file=data_files/server5.key" \ 0 \ -S "skip write certificate request" \ -C "skip parse certificate request" \ -c "got a certificate request" \ -C "skip write certificate" \ -C "skip write certificate verify" \ -S "skip parse certificate verify" \ -s "x509_verify_cert() returned" \ -s "! self-signed or not signed by a trusted CA" \ -S "! ssl_handshake returned" \ -C "! ssl_handshake returned" \ -S "X509 - Certificate verification failed" run_test "Authentication: client badcert, server none" \ "$P_SRV debug_level=3 auth_mode=none" \ "$P_CLI debug_level=3 crt_file=data_files/server5-badsign.crt \ key_file=data_files/server5.key" \ 0 \ -s "skip write certificate request" \ -C "skip parse certificate request" \ -c "got no certificate request" \ -c "skip write certificate" \ -c "skip write certificate verify" \ -s "skip parse certificate verify" \ -S "x509_verify_cert() returned" \ -S "! self-signed or not signed by a trusted CA" \ -S "! ssl_handshake returned" \ -C "! ssl_handshake returned" \ -S "X509 - Certificate verification failed" run_test "Authentication: client no cert, server optional" \ "$P_SRV debug_level=3 auth_mode=optional" \ "$P_CLI debug_level=3 crt_file=none key_file=none" \ 0 \ -S "skip write certificate request" \ -C "skip parse certificate request" \ -c "got a certificate request" \ -C "skip write certificate$" \ -C "got no certificate to send" \ -S "SSLv3 client has no certificate" \ -c "skip write certificate verify" \ -s "skip parse certificate verify" \ -s "! no client certificate sent" \ -S "! ssl_handshake returned" \ -C "! ssl_handshake returned" \ -S "X509 - Certificate verification failed" run_test "Authentication: openssl client no cert, server optional" \ "$P_SRV debug_level=3 auth_mode=optional" \ "$O_CLI" \ 0 \ -S "skip write certificate request" \ -s "skip parse certificate verify" \ -s "! no client certificate sent" \ -S "! ssl_handshake returned" \ -S "X509 - Certificate verification failed" run_test "Authentication: client no cert, openssl server optional" \ "$O_SRV -verify 10" \ "$P_CLI debug_level=3 crt_file=none key_file=none" \ 0 \ -C "skip parse certificate request" \ -c "got a certificate request" \ -C "skip write certificate$" \ -c "skip write certificate verify" \ -C "! ssl_handshake returned" run_test "Authentication: client no cert, ssl3" \ "$P_SRV debug_level=3 auth_mode=optional force_version=ssl3" \ "$P_CLI debug_level=3 crt_file=none key_file=none" \ 0 \ -S "skip write certificate request" \ -C "skip parse certificate request" \ -c "got a certificate request" \ -C "skip write certificate$" \ -c "skip write certificate verify" \ -c "got no certificate to send" \ -s "SSLv3 client has no certificate" \ -s "skip parse certificate verify" \ -s "! no client certificate sent" \ -S "! ssl_handshake returned" \ -C "! ssl_handshake returned" \ -S "X509 - Certificate verification failed" # tests for SNI run_test "SNI: no SNI callback" \ "$P_SRV debug_level=3 \ crt_file=data_files/server5.crt key_file=data_files/server5.key" \ "$P_CLI server_name=localhost" \ 0 \ -S "parse ServerName extension" \ -c "issuer name *: C=NL, O=PolarSSL, CN=Polarssl Test EC CA" \ -c "subject name *: C=NL, O=PolarSSL, CN=localhost" run_test "SNI: matching cert 1" \ "$P_SRV debug_level=3 \ crt_file=data_files/server5.crt key_file=data_files/server5.key \ sni=localhost,data_files/server2.crt,data_files/server2.key,polarssl.example,data_files/server1-nospace.crt,data_files/server1.key" \ "$P_CLI server_name=localhost" \ 0 \ -s "parse ServerName extension" \ -c "issuer name *: C=NL, O=PolarSSL, CN=PolarSSL Test CA" \ -c "subject name *: C=NL, O=PolarSSL, CN=localhost" run_test "SNI: matching cert 2" \ "$P_SRV debug_level=3 \ crt_file=data_files/server5.crt key_file=data_files/server5.key \ sni=localhost,data_files/server2.crt,data_files/server2.key,polarssl.example,data_files/server1-nospace.crt,data_files/server1.key" \ "$P_CLI server_name=polarssl.example" \ 0 \ -s "parse ServerName extension" \ -c "issuer name *: C=NL, O=PolarSSL, CN=PolarSSL Test CA" \ -c "subject name *: C=NL, O=PolarSSL, CN=polarssl.example" run_test "SNI: no matching cert" \ "$P_SRV debug_level=3 \ crt_file=data_files/server5.crt key_file=data_files/server5.key \ sni=localhost,data_files/server2.crt,data_files/server2.key,polarssl.example,data_files/server1-nospace.crt,data_files/server1.key" \ "$P_CLI server_name=nonesuch.example" \ 1 \ -s "parse ServerName extension" \ -s "ssl_sni_wrapper() returned" \ -s "ssl_handshake returned" \ -c "ssl_handshake returned" \ -c "SSL - A fatal alert message was received from our peer" # Tests for non-blocking I/O: exercise a variety of handshake flows run_test "Non-blocking I/O: basic handshake" \ "$P_SRV nbio=2 tickets=0 auth_mode=none" \ "$P_CLI nbio=2 tickets=0" \ 0 \ -S "ssl_handshake returned" \ -C "ssl_handshake returned" \ -c "Read from server: .* bytes read" run_test "Non-blocking I/O: client auth" \ "$P_SRV nbio=2 tickets=0 auth_mode=required" \ "$P_CLI nbio=2 tickets=0" \ 0 \ -S "ssl_handshake returned" \ -C "ssl_handshake returned" \ -c "Read from server: .* bytes read" run_test "Non-blocking I/O: ticket" \ "$P_SRV nbio=2 tickets=1 auth_mode=none" \ "$P_CLI nbio=2 tickets=1" \ 0 \ -S "ssl_handshake returned" \ -C "ssl_handshake returned" \ -c "Read from server: .* bytes read" run_test "Non-blocking I/O: ticket + client auth" \ "$P_SRV nbio=2 tickets=1 auth_mode=required" \ "$P_CLI nbio=2 tickets=1" \ 0 \ -S "ssl_handshake returned" \ -C "ssl_handshake returned" \ -c "Read from server: .* bytes read" run_test "Non-blocking I/O: ticket + client auth + resume" \ "$P_SRV nbio=2 tickets=1 auth_mode=required" \ "$P_CLI nbio=2 tickets=1 reconnect=1" \ 0 \ -S "ssl_handshake returned" \ -C "ssl_handshake returned" \ -c "Read from server: .* bytes read" run_test "Non-blocking I/O: ticket + resume" \ "$P_SRV nbio=2 tickets=1 auth_mode=none" \ "$P_CLI nbio=2 tickets=1 reconnect=1" \ 0 \ -S "ssl_handshake returned" \ -C "ssl_handshake returned" \ -c "Read from server: .* bytes read" run_test "Non-blocking I/O: session-id resume" \ "$P_SRV nbio=2 tickets=0 auth_mode=none" \ "$P_CLI nbio=2 tickets=0 reconnect=1" \ 0 \ -S "ssl_handshake returned" \ -C "ssl_handshake returned" \ -c "Read from server: .* bytes read" # Tests for version negotiation run_test "Version check: all -> 1.2" \ "$P_SRV" \ "$P_CLI" \ 0 \ -S "ssl_handshake returned" \ -C "ssl_handshake returned" \ -s "Protocol is TLSv1.2" \ -c "Protocol is TLSv1.2" run_test "Version check: cli max 1.1 -> 1.1" \ "$P_SRV" \ "$P_CLI max_version=tls1_1" \ 0 \ -S "ssl_handshake returned" \ -C "ssl_handshake returned" \ -s "Protocol is TLSv1.1" \ -c "Protocol is TLSv1.1" run_test "Version check: srv max 1.1 -> 1.1" \ "$P_SRV max_version=tls1_1" \ "$P_CLI" \ 0 \ -S "ssl_handshake returned" \ -C "ssl_handshake returned" \ -s "Protocol is TLSv1.1" \ -c "Protocol is TLSv1.1" run_test "Version check: cli+srv max 1.1 -> 1.1" \ "$P_SRV max_version=tls1_1" \ "$P_CLI max_version=tls1_1" \ 0 \ -S "ssl_handshake returned" \ -C "ssl_handshake returned" \ -s "Protocol is TLSv1.1" \ -c "Protocol is TLSv1.1" run_test "Version check: cli max 1.1, srv min 1.1 -> 1.1" \ "$P_SRV min_version=tls1_1" \ "$P_CLI max_version=tls1_1" \ 0 \ -S "ssl_handshake returned" \ -C "ssl_handshake returned" \ -s "Protocol is TLSv1.1" \ -c "Protocol is TLSv1.1" run_test "Version check: cli min 1.1, srv max 1.1 -> 1.1" \ "$P_SRV max_version=tls1_1" \ "$P_CLI min_version=tls1_1" \ 0 \ -S "ssl_handshake returned" \ -C "ssl_handshake returned" \ -s "Protocol is TLSv1.1" \ -c "Protocol is TLSv1.1" run_test "Version check: cli min 1.2, srv max 1.1 -> fail" \ "$P_SRV max_version=tls1_1" \ "$P_CLI min_version=tls1_2" \ 1 \ -s "ssl_handshake returned" \ -c "ssl_handshake returned" \ -c "SSL - Handshake protocol not within min/max boundaries" run_test "Version check: srv min 1.2, cli max 1.1 -> fail" \ "$P_SRV min_version=tls1_2" \ "$P_CLI max_version=tls1_1" \ 1 \ -s "ssl_handshake returned" \ -c "ssl_handshake returned" \ -s "SSL - Handshake protocol not within min/max boundaries" # Tests for ALPN extension if grep '^#define POLARSSL_SSL_ALPN' $CONFIG_H >/dev/null; then run_test "ALPN: none" \ "$P_SRV debug_level=3" \ "$P_CLI debug_level=3" \ 0 \ -C "client hello, adding alpn extension" \ -S "found alpn extension" \ -C "got an alert message, type: \\[2:120]" \ -S "server hello, adding alpn extension" \ -C "found alpn extension " \ -C "Application Layer Protocol is" \ -S "Application Layer Protocol is" run_test "ALPN: client only" \ "$P_SRV debug_level=3" \ "$P_CLI debug_level=3 alpn=abc,1234" \ 0 \ -c "client hello, adding alpn extension" \ -s "found alpn extension" \ -C "got an alert message, type: \\[2:120]" \ -S "server hello, adding alpn extension" \ -C "found alpn extension " \ -c "Application Layer Protocol is (none)" \ -S "Application Layer Protocol is" run_test "ALPN: server only" \ "$P_SRV debug_level=3 alpn=abc,1234" \ "$P_CLI debug_level=3" \ 0 \ -C "client hello, adding alpn extension" \ -S "found alpn extension" \ -C "got an alert message, type: \\[2:120]" \ -S "server hello, adding alpn extension" \ -C "found alpn extension " \ -C "Application Layer Protocol is" \ -s "Application Layer Protocol is (none)" run_test "ALPN: both, common cli1-srv1" \ "$P_SRV debug_level=3 alpn=abc,1234" \ "$P_CLI debug_level=3 alpn=abc,1234" \ 0 \ -c "client hello, adding alpn extension" \ -s "found alpn extension" \ -C "got an alert message, type: \\[2:120]" \ -s "server hello, adding alpn extension" \ -c "found alpn extension" \ -c "Application Layer Protocol is abc" \ -s "Application Layer Protocol is abc" run_test "ALPN: both, common cli2-srv1" \ "$P_SRV debug_level=3 alpn=abc,1234" \ "$P_CLI debug_level=3 alpn=1234,abc" \ 0 \ -c "client hello, adding alpn extension" \ -s "found alpn extension" \ -C "got an alert message, type: \\[2:120]" \ -s "server hello, adding alpn extension" \ -c "found alpn extension" \ -c "Application Layer Protocol is abc" \ -s "Application Layer Protocol is abc" run_test "ALPN: both, common cli1-srv2" \ "$P_SRV debug_level=3 alpn=abc,1234" \ "$P_CLI debug_level=3 alpn=1234,abcde" \ 0 \ -c "client hello, adding alpn extension" \ -s "found alpn extension" \ -C "got an alert message, type: \\[2:120]" \ -s "server hello, adding alpn extension" \ -c "found alpn extension" \ -c "Application Layer Protocol is 1234" \ -s "Application Layer Protocol is 1234" run_test "ALPN: both, no common" \ "$P_SRV debug_level=3 alpn=abc,123" \ "$P_CLI debug_level=3 alpn=1234,abcde" \ 1 \ -c "client hello, adding alpn extension" \ -s "found alpn extension" \ -c "got an alert message, type: \\[2:120]" \ -S "server hello, adding alpn extension" \ -C "found alpn extension" \ -C "Application Layer Protocol is 1234" \ -S "Application Layer Protocol is 1234" fi # Tests for keyUsage in leaf certificates, part 1: # server-side certificate/suite selection run_test "keyUsage srv: RSA, digitalSignature -> (EC)DHE-RSA" \ "$P_SRV key_file=data_files/server2.key \ crt_file=data_files/server2.ku-ds.crt" \ "$P_CLI" \ 0 \ -c "Ciphersuite is TLS-[EC]*DHE-RSA-WITH-" run_test "keyUsage srv: RSA, keyEncipherment -> RSA" \ "$P_SRV key_file=data_files/server2.key \ crt_file=data_files/server2.ku-ke.crt" \ "$P_CLI" \ 0 \ -c "Ciphersuite is TLS-RSA-WITH-" run_test "keyUsage srv: RSA, keyAgreement -> fail" \ "$P_SRV key_file=data_files/server2.key \ crt_file=data_files/server2.ku-ka.crt" \ "$P_CLI" \ 1 \ -C "Ciphersuite is " run_test "keyUsage srv: ECDSA, digitalSignature -> ECDHE-ECDSA" \ "$P_SRV key_file=data_files/server5.key \ crt_file=data_files/server5.ku-ds.crt" \ "$P_CLI" \ 0 \ -c "Ciphersuite is TLS-ECDHE-ECDSA-WITH-" run_test "keyUsage srv: ECDSA, keyAgreement -> ECDH-" \ "$P_SRV key_file=data_files/server5.key \ crt_file=data_files/server5.ku-ka.crt" \ "$P_CLI" \ 0 \ -c "Ciphersuite is TLS-ECDH-" run_test "keyUsage srv: ECDSA, keyEncipherment -> fail" \ "$P_SRV key_file=data_files/server5.key \ crt_file=data_files/server5.ku-ke.crt" \ "$P_CLI" \ 1 \ -C "Ciphersuite is " # Tests for keyUsage in leaf certificates, part 2: # client-side checking of server cert run_test "keyUsage cli: DigitalSignature+KeyEncipherment, RSA: OK" \ "$O_SRV -key data_files/server2.key \ -cert data_files/server2.ku-ds_ke.crt" \ "$P_CLI debug_level=1 \ force_ciphersuite=TLS-RSA-WITH-AES-128-CBC-SHA" \ 0 \ -C "bad certificate (usage extensions)" \ -C "Processing of the Certificate handshake message failed" \ -c "Ciphersuite is TLS-" run_test "keyUsage cli: DigitalSignature+KeyEncipherment, DHE-RSA: OK" \ "$O_SRV -key data_files/server2.key \ -cert data_files/server2.ku-ds_ke.crt" \ "$P_CLI debug_level=1 \ force_ciphersuite=TLS-DHE-RSA-WITH-AES-128-CBC-SHA" \ 0 \ -C "bad certificate (usage extensions)" \ -C "Processing of the Certificate handshake message failed" \ -c "Ciphersuite is TLS-" run_test "keyUsage cli: KeyEncipherment, RSA: OK" \ "$O_SRV -key data_files/server2.key \ -cert data_files/server2.ku-ke.crt" \ "$P_CLI debug_level=1 \ force_ciphersuite=TLS-RSA-WITH-AES-128-CBC-SHA" \ 0 \ -C "bad certificate (usage extensions)" \ -C "Processing of the Certificate handshake message failed" \ -c "Ciphersuite is TLS-" run_test "keyUsage cli: KeyEncipherment, DHE-RSA: fail" \ "$O_SRV -key data_files/server2.key \ -cert data_files/server2.ku-ke.crt" \ "$P_CLI debug_level=1 \ force_ciphersuite=TLS-DHE-RSA-WITH-AES-128-CBC-SHA" \ 1 \ -c "bad certificate (usage extensions)" \ -c "Processing of the Certificate handshake message failed" \ -C "Ciphersuite is TLS-" run_test "keyUsage cli: DigitalSignature, DHE-RSA: OK" \ "$O_SRV -key data_files/server2.key \ -cert data_files/server2.ku-ds.crt" \ "$P_CLI debug_level=1 \ force_ciphersuite=TLS-DHE-RSA-WITH-AES-128-CBC-SHA" \ 0 \ -C "bad certificate (usage extensions)" \ -C "Processing of the Certificate handshake message failed" \ -c "Ciphersuite is TLS-" run_test "keyUsage cli: DigitalSignature, RSA: fail" \ "$O_SRV -key data_files/server2.key \ -cert data_files/server2.ku-ds.crt" \ "$P_CLI debug_level=1 \ force_ciphersuite=TLS-RSA-WITH-AES-128-CBC-SHA" \ 1 \ -c "bad certificate (usage extensions)" \ -c "Processing of the Certificate handshake message failed" \ -C "Ciphersuite is TLS-" # Tests for keyUsage in leaf certificates, part 3: # server-side checking of client cert run_test "keyUsage cli-auth: RSA, DigitalSignature: OK" \ "$P_SRV debug_level=1 auth_mode=optional" \ "$O_CLI -key data_files/server2.key \ -cert data_files/server2.ku-ds.crt" \ 0 \ -S "bad certificate (usage extensions)" \ -S "Processing of the Certificate handshake message failed" run_test "keyUsage cli-auth: RSA, KeyEncipherment: fail (soft)" \ "$P_SRV debug_level=1 auth_mode=optional" \ "$O_CLI -key data_files/server2.key \ -cert data_files/server2.ku-ke.crt" \ 0 \ -s "bad certificate (usage extensions)" \ -S "Processing of the Certificate handshake message failed" run_test "keyUsage cli-auth: RSA, KeyEncipherment: fail (hard)" \ "$P_SRV debug_level=1 auth_mode=required" \ "$O_CLI -key data_files/server2.key \ -cert data_files/server2.ku-ke.crt" \ 1 \ -s "bad certificate (usage extensions)" \ -s "Processing of the Certificate handshake message failed" run_test "keyUsage cli-auth: ECDSA, DigitalSignature: OK" \ "$P_SRV debug_level=1 auth_mode=optional" \ "$O_CLI -key data_files/server5.key \ -cert data_files/server5.ku-ds.crt" \ 0 \ -S "bad certificate (usage extensions)" \ -S "Processing of the Certificate handshake message failed" run_test "keyUsage cli-auth: ECDSA, KeyAgreement: fail (soft)" \ "$P_SRV debug_level=1 auth_mode=optional" \ "$O_CLI -key data_files/server5.key \ -cert data_files/server5.ku-ka.crt" \ 0 \ -s "bad certificate (usage extensions)" \ -S "Processing of the Certificate handshake message failed" # Tests for extendedKeyUsage, part 1: server-side certificate/suite selection run_test "extKeyUsage srv: serverAuth -> OK" \ "$P_SRV key_file=data_files/server5.key \ crt_file=data_files/server5.eku-srv.crt" \ "$P_CLI" \ 0 run_test "extKeyUsage srv: serverAuth,clientAuth -> OK" \ "$P_SRV key_file=data_files/server5.key \ crt_file=data_files/server5.eku-srv.crt" \ "$P_CLI" \ 0 run_test "extKeyUsage srv: codeSign,anyEKU -> OK" \ "$P_SRV key_file=data_files/server5.key \ crt_file=data_files/server5.eku-cs_any.crt" \ "$P_CLI" \ 0 # add psk to leave an option for client to send SERVERQUIT run_test "extKeyUsage srv: codeSign -> fail" \ "$P_SRV psk=abc123 key_file=data_files/server5.key \ crt_file=data_files/server5.eku-cli.crt" \ "$P_CLI psk=badbad" \ 1 # Tests for extendedKeyUsage, part 2: client-side checking of server cert run_test "extKeyUsage cli: serverAuth -> OK" \ "$O_SRV -key data_files/server5.key \ -cert data_files/server5.eku-srv.crt" \ "$P_CLI debug_level=1" \ 0 \ -C "bad certificate (usage extensions)" \ -C "Processing of the Certificate handshake message failed" \ -c "Ciphersuite is TLS-" run_test "extKeyUsage cli: serverAuth,clientAuth -> OK" \ "$O_SRV -key data_files/server5.key \ -cert data_files/server5.eku-srv_cli.crt" \ "$P_CLI debug_level=1" \ 0 \ -C "bad certificate (usage extensions)" \ -C "Processing of the Certificate handshake message failed" \ -c "Ciphersuite is TLS-" run_test "extKeyUsage cli: codeSign,anyEKU -> OK" \ "$O_SRV -key data_files/server5.key \ -cert data_files/server5.eku-cs_any.crt" \ "$P_CLI debug_level=1" \ 0 \ -C "bad certificate (usage extensions)" \ -C "Processing of the Certificate handshake message failed" \ -c "Ciphersuite is TLS-" run_test "extKeyUsage cli: codeSign -> fail" \ "$O_SRV -key data_files/server5.key \ -cert data_files/server5.eku-cs.crt" \ "$P_CLI debug_level=1" \ 1 \ -c "bad certificate (usage extensions)" \ -c "Processing of the Certificate handshake message failed" \ -C "Ciphersuite is TLS-" # Tests for extendedKeyUsage, part 3: server-side checking of client cert run_test "extKeyUsage cli-auth: clientAuth -> OK" \ "$P_SRV debug_level=1 auth_mode=optional" \ "$O_CLI -key data_files/server5.key \ -cert data_files/server5.eku-cli.crt" \ 0 \ -S "bad certificate (usage extensions)" \ -S "Processing of the Certificate handshake message failed" run_test "extKeyUsage cli-auth: serverAuth,clientAuth -> OK" \ "$P_SRV debug_level=1 auth_mode=optional" \ "$O_CLI -key data_files/server5.key \ -cert data_files/server5.eku-srv_cli.crt" \ 0 \ -S "bad certificate (usage extensions)" \ -S "Processing of the Certificate handshake message failed" run_test "extKeyUsage cli-auth: codeSign,anyEKU -> OK" \ "$P_SRV debug_level=1 auth_mode=optional" \ "$O_CLI -key data_files/server5.key \ -cert data_files/server5.eku-cs_any.crt" \ 0 \ -S "bad certificate (usage extensions)" \ -S "Processing of the Certificate handshake message failed" run_test "extKeyUsage cli-auth: codeSign -> fail (soft)" \ "$P_SRV debug_level=1 auth_mode=optional" \ "$O_CLI -key data_files/server5.key \ -cert data_files/server5.eku-cs.crt" \ 0 \ -s "bad certificate (usage extensions)" \ -S "Processing of the Certificate handshake message failed" run_test "extKeyUsage cli-auth: codeSign -> fail (hard)" \ "$P_SRV debug_level=1 auth_mode=required" \ "$O_CLI -key data_files/server5.key \ -cert data_files/server5.eku-cs.crt" \ 1 \ -s "bad certificate (usage extensions)" \ -s "Processing of the Certificate handshake message failed" # Tests for DHM parameters loading run_test "DHM parameters: reference" \ "$P_SRV" \ "$P_CLI force_ciphersuite=TLS-DHE-RSA-WITH-AES-128-CBC-SHA \ debug_level=3" \ 0 \ -c "value of 'DHM: P ' (2048 bits)" \ -c "value of 'DHM: G ' (2048 bits)" run_test "DHM parameters: other parameters" \ "$P_SRV dhm_file=data_files/dhparams.pem" \ "$P_CLI force_ciphersuite=TLS-DHE-RSA-WITH-AES-128-CBC-SHA \ debug_level=3" \ 0 \ -c "value of 'DHM: P ' (1024 bits)" \ -c "value of 'DHM: G ' (2 bits)" # Tests for PSK callback run_test "PSK callback: psk, no callback" \ "$P_SRV psk=abc123 psk_identity=foo" \ "$P_CLI force_ciphersuite=TLS-PSK-WITH-AES-128-CBC-SHA \ psk_identity=foo psk=abc123" \ 0 \ -S "SSL - The server has no ciphersuites in common" \ -S "SSL - Unknown identity received" \ -S "SSL - Verification of the message MAC failed" run_test "PSK callback: no psk, no callback" \ "$P_SRV" \ "$P_CLI force_ciphersuite=TLS-PSK-WITH-AES-128-CBC-SHA \ psk_identity=foo psk=abc123" \ 1 \ -s "SSL - The server has no ciphersuites in common" \ -S "SSL - Unknown identity received" \ -S "SSL - Verification of the message MAC failed" run_test "PSK callback: callback overrides other settings" \ "$P_SRV psk=abc123 psk_identity=foo psk_list=abc,dead,def,beef" \ "$P_CLI force_ciphersuite=TLS-PSK-WITH-AES-128-CBC-SHA \ psk_identity=foo psk=abc123" \ 1 \ -S "SSL - The server has no ciphersuites in common" \ -s "SSL - Unknown identity received" \ -S "SSL - Verification of the message MAC failed" run_test "PSK callback: first id matches" \ "$P_SRV psk_list=abc,dead,def,beef" \ "$P_CLI force_ciphersuite=TLS-PSK-WITH-AES-128-CBC-SHA \ psk_identity=abc psk=dead" \ 0 \ -S "SSL - The server has no ciphersuites in common" \ -S "SSL - Unknown identity received" \ -S "SSL - Verification of the message MAC failed" run_test "PSK callback: second id matches" \ "$P_SRV psk_list=abc,dead,def,beef" \ "$P_CLI force_ciphersuite=TLS-PSK-WITH-AES-128-CBC-SHA \ psk_identity=def psk=beef" \ 0 \ -S "SSL - The server has no ciphersuites in common" \ -S "SSL - Unknown identity received" \ -S "SSL - Verification of the message MAC failed" run_test "PSK callback: no match" \ "$P_SRV psk_list=abc,dead,def,beef" \ "$P_CLI force_ciphersuite=TLS-PSK-WITH-AES-128-CBC-SHA \ psk_identity=ghi psk=beef" \ 1 \ -S "SSL - The server has no ciphersuites in common" \ -s "SSL - Unknown identity received" \ -S "SSL - Verification of the message MAC failed" run_test "PSK callback: wrong key" \ "$P_SRV psk_list=abc,dead,def,beef" \ "$P_CLI force_ciphersuite=TLS-PSK-WITH-AES-128-CBC-SHA \ psk_identity=abc psk=beef" \ 1 \ -S "SSL - The server has no ciphersuites in common" \ -S "SSL - Unknown identity received" \ -s "SSL - Verification of the message MAC failed" # Tests for ciphersuites per version run_test "Per-version suites: SSL3" \ "$P_SRV version_suites=TLS-RSA-WITH-3DES-EDE-CBC-SHA,TLS-RSA-WITH-RC4-128-SHA,TLS-RSA-WITH-AES-128-CBC-SHA,TLS-RSA-WITH-AES-128-GCM-SHA256" \ "$P_CLI force_version=ssl3" \ 0 \ -c "Ciphersuite is TLS-RSA-WITH-3DES-EDE-CBC-SHA" run_test "Per-version suites: TLS 1.0" \ "$P_SRV version_suites=TLS-RSA-WITH-3DES-EDE-CBC-SHA,TLS-RSA-WITH-RC4-128-SHA,TLS-RSA-WITH-AES-128-CBC-SHA,TLS-RSA-WITH-AES-128-GCM-SHA256" \ "$P_CLI force_version=tls1" \ 0 \ -c "Ciphersuite is TLS-RSA-WITH-RC4-128-SHA" run_test "Per-version suites: TLS 1.1" \ "$P_SRV version_suites=TLS-RSA-WITH-3DES-EDE-CBC-SHA,TLS-RSA-WITH-RC4-128-SHA,TLS-RSA-WITH-AES-128-CBC-SHA,TLS-RSA-WITH-AES-128-GCM-SHA256" \ "$P_CLI force_version=tls1_1" \ 0 \ -c "Ciphersuite is TLS-RSA-WITH-AES-128-CBC-SHA" run_test "Per-version suites: TLS 1.2" \ "$P_SRV version_suites=TLS-RSA-WITH-3DES-EDE-CBC-SHA,TLS-RSA-WITH-RC4-128-SHA,TLS-RSA-WITH-AES-128-CBC-SHA,TLS-RSA-WITH-AES-128-GCM-SHA256" \ "$P_CLI force_version=tls1_2" \ 0 \ -c "Ciphersuite is TLS-RSA-WITH-AES-128-GCM-SHA256" # Tests for ssl_get_bytes_avail() run_test "ssl_get_bytes_avail: no extra data" \ "$P_SRV" \ "$P_CLI request_size=100" \ 0 \ -s "Read from client: 100 bytes read$" run_test "ssl_get_bytes_avail: extra data" \ "$P_SRV" \ "$P_CLI request_size=500" \ 0 \ -s "Read from client: 500 bytes read (.*+.*)" # Tests for small packets run_test "Small packet SSLv3 BlockCipher" \ "$P_SRV" \ "$P_CLI request_size=1 force_version=ssl3 \ force_ciphersuite=TLS-RSA-WITH-AES-256-CBC-SHA" \ 0 \ -s "Read from client: 1 bytes read" run_test "Small packet SSLv3 StreamCipher" \ "$P_SRV" \ "$P_CLI request_size=1 force_version=ssl3 \ force_ciphersuite=TLS-RSA-WITH-RC4-128-SHA" \ 0 \ -s "Read from client: 1 bytes read" run_test "Small packet TLS 1.0 BlockCipher" \ "$P_SRV" \ "$P_CLI request_size=1 force_version=tls1 \ force_ciphersuite=TLS-RSA-WITH-AES-256-CBC-SHA" \ 0 \ -s "Read from client: 1 bytes read" run_test "Small packet TLS 1.0 BlockCipher without EtM" \ "$P_SRV" \ "$P_CLI request_size=1 force_version=tls1 etm=0 \ force_ciphersuite=TLS-RSA-WITH-AES-256-CBC-SHA" \ 0 \ -s "Read from client: 1 bytes read" run_test "Small packet TLS 1.0 BlockCipher truncated MAC" \ "$P_SRV" \ "$P_CLI request_size=1 force_version=tls1 \ force_ciphersuite=TLS-RSA-WITH-AES-256-CBC-SHA \ trunc_hmac=1" \ 0 \ -s "Read from client: 1 bytes read" run_test "Small packet TLS 1.0 StreamCipher truncated MAC" \ "$P_SRV" \ "$P_CLI request_size=1 force_version=tls1 \ force_ciphersuite=TLS-RSA-WITH-RC4-128-SHA \ trunc_hmac=1" \ 0 \ -s "Read from client: 1 bytes read" run_test "Small packet TLS 1.1 BlockCipher" \ "$P_SRV" \ "$P_CLI request_size=1 force_version=tls1_1 \ force_ciphersuite=TLS-RSA-WITH-AES-256-CBC-SHA" \ 0 \ -s "Read from client: 1 bytes read" run_test "Small packet TLS 1.1 BlockCipher without EtM" \ "$P_SRV" \ "$P_CLI request_size=1 force_version=tls1_1 etm=0 \ force_ciphersuite=TLS-RSA-WITH-AES-256-CBC-SHA" \ 0 \ -s "Read from client: 1 bytes read" run_test "Small packet TLS 1.1 StreamCipher" \ "$P_SRV" \ "$P_CLI request_size=1 force_version=tls1_1 \ force_ciphersuite=TLS-RSA-WITH-RC4-128-SHA" \ 0 \ -s "Read from client: 1 bytes read" run_test "Small packet TLS 1.1 BlockCipher truncated MAC" \ "$P_SRV" \ "$P_CLI request_size=1 force_version=tls1_1 \ force_ciphersuite=TLS-RSA-WITH-AES-256-CBC-SHA \ trunc_hmac=1" \ 0 \ -s "Read from client: 1 bytes read" run_test "Small packet TLS 1.1 StreamCipher truncated MAC" \ "$P_SRV" \ "$P_CLI request_size=1 force_version=tls1_1 \ force_ciphersuite=TLS-RSA-WITH-RC4-128-SHA \ trunc_hmac=1" \ 0 \ -s "Read from client: 1 bytes read" run_test "Small packet TLS 1.2 BlockCipher" \ "$P_SRV" \ "$P_CLI request_size=1 force_version=tls1_2 \ force_ciphersuite=TLS-RSA-WITH-AES-256-CBC-SHA" \ 0 \ -s "Read from client: 1 bytes read" run_test "Small packet TLS 1.2 BlockCipher without EtM" \ "$P_SRV" \ "$P_CLI request_size=1 force_version=tls1_2 etm=0 \ force_ciphersuite=TLS-RSA-WITH-AES-256-CBC-SHA" \ 0 \ -s "Read from client: 1 bytes read" run_test "Small packet TLS 1.2 BlockCipher larger MAC" \ "$P_SRV" \ "$P_CLI request_size=1 force_version=tls1_2 \ force_ciphersuite=TLS-ECDHE-RSA-WITH-AES-256-CBC-SHA384" \ 0 \ -s "Read from client: 1 bytes read" run_test "Small packet TLS 1.2 BlockCipher truncated MAC" \ "$P_SRV" \ "$P_CLI request_size=1 force_version=tls1_2 \ force_ciphersuite=TLS-RSA-WITH-AES-256-CBC-SHA \ trunc_hmac=1" \ 0 \ -s "Read from client: 1 bytes read" run_test "Small packet TLS 1.2 StreamCipher" \ "$P_SRV" \ "$P_CLI request_size=1 force_version=tls1_2 \ force_ciphersuite=TLS-RSA-WITH-RC4-128-SHA" \ 0 \ -s "Read from client: 1 bytes read" run_test "Small packet TLS 1.2 StreamCipher truncated MAC" \ "$P_SRV" \ "$P_CLI request_size=1 force_version=tls1_2 \ force_ciphersuite=TLS-RSA-WITH-RC4-128-SHA \ trunc_hmac=1" \ 0 \ -s "Read from client: 1 bytes read" run_test "Small packet TLS 1.2 AEAD" \ "$P_SRV" \ "$P_CLI request_size=1 force_version=tls1_2 \ force_ciphersuite=TLS-RSA-WITH-AES-256-CCM" \ 0 \ -s "Read from client: 1 bytes read" run_test "Small packet TLS 1.2 AEAD shorter tag" \ "$P_SRV" \ "$P_CLI request_size=1 force_version=tls1_2 \ force_ciphersuite=TLS-RSA-WITH-AES-256-CCM-8" \ 0 \ -s "Read from client: 1 bytes read" # Test for large packets run_test "Large packet SSLv3 BlockCipher" \ "$P_SRV" \ "$P_CLI request_size=16384 force_version=ssl3 recsplit=0 \ force_ciphersuite=TLS-RSA-WITH-AES-256-CBC-SHA" \ 0 \ -s "Read from client: 16384 bytes read" run_test "Large packet SSLv3 StreamCipher" \ "$P_SRV" \ "$P_CLI request_size=16384 force_version=ssl3 \ force_ciphersuite=TLS-RSA-WITH-RC4-128-SHA" \ 0 \ -s "Read from client: 16384 bytes read" run_test "Large packet TLS 1.0 BlockCipher" \ "$P_SRV" \ "$P_CLI request_size=16384 force_version=tls1 recsplit=0 \ force_ciphersuite=TLS-RSA-WITH-AES-256-CBC-SHA" \ 0 \ -s "Read from client: 16384 bytes read" run_test "Large packet TLS 1.0 BlockCipher truncated MAC" \ "$P_SRV" \ "$P_CLI request_size=16384 force_version=tls1 recsplit=0 \ force_ciphersuite=TLS-RSA-WITH-AES-256-CBC-SHA \ trunc_hmac=1" \ 0 \ -s "Read from client: 16384 bytes read" run_test "Large packet TLS 1.0 StreamCipher truncated MAC" \ "$P_SRV" \ "$P_CLI request_size=16384 force_version=tls1 \ force_ciphersuite=TLS-RSA-WITH-RC4-128-SHA \ trunc_hmac=1" \ 0 \ -s "Read from client: 16384 bytes read" run_test "Large packet TLS 1.1 BlockCipher" \ "$P_SRV" \ "$P_CLI request_size=16384 force_version=tls1_1 \ force_ciphersuite=TLS-RSA-WITH-AES-256-CBC-SHA" \ 0 \ -s "Read from client: 16384 bytes read" run_test "Large packet TLS 1.1 StreamCipher" \ "$P_SRV" \ "$P_CLI request_size=16384 force_version=tls1_1 \ force_ciphersuite=TLS-RSA-WITH-RC4-128-SHA" \ 0 \ -s "Read from client: 16384 bytes read" run_test "Large packet TLS 1.1 BlockCipher truncated MAC" \ "$P_SRV" \ "$P_CLI request_size=16384 force_version=tls1_1 \ force_ciphersuite=TLS-RSA-WITH-AES-256-CBC-SHA \ trunc_hmac=1" \ 0 \ -s "Read from client: 16384 bytes read" run_test "Large packet TLS 1.1 StreamCipher truncated MAC" \ "$P_SRV" \ "$P_CLI request_size=16384 force_version=tls1_1 \ force_ciphersuite=TLS-RSA-WITH-RC4-128-SHA \ trunc_hmac=1" \ 0 \ -s "Read from client: 16384 bytes read" run_test "Large packet TLS 1.2 BlockCipher" \ "$P_SRV" \ "$P_CLI request_size=16384 force_version=tls1_2 \ force_ciphersuite=TLS-RSA-WITH-AES-256-CBC-SHA" \ 0 \ -s "Read from client: 16384 bytes read" run_test "Large packet TLS 1.2 BlockCipher larger MAC" \ "$P_SRV" \ "$P_CLI request_size=16384 force_version=tls1_2 \ force_ciphersuite=TLS-ECDHE-RSA-WITH-AES-256-CBC-SHA384" \ 0 \ -s "Read from client: 16384 bytes read" run_test "Large packet TLS 1.2 BlockCipher truncated MAC" \ "$P_SRV" \ "$P_CLI request_size=16384 force_version=tls1_2 \ force_ciphersuite=TLS-RSA-WITH-AES-256-CBC-SHA \ trunc_hmac=1" \ 0 \ -s "Read from client: 16384 bytes read" run_test "Large packet TLS 1.2 StreamCipher" \ "$P_SRV" \ "$P_CLI request_size=16384 force_version=tls1_2 \ force_ciphersuite=TLS-RSA-WITH-RC4-128-SHA" \ 0 \ -s "Read from client: 16384 bytes read" run_test "Large packet TLS 1.2 StreamCipher truncated MAC" \ "$P_SRV" \ "$P_CLI request_size=16384 force_version=tls1_2 \ force_ciphersuite=TLS-RSA-WITH-RC4-128-SHA \ trunc_hmac=1" \ 0 \ -s "Read from client: 16384 bytes read" run_test "Large packet TLS 1.2 AEAD" \ "$P_SRV" \ "$P_CLI request_size=16384 force_version=tls1_2 \ force_ciphersuite=TLS-RSA-WITH-AES-256-CCM" \ 0 \ -s "Read from client: 16384 bytes read" run_test "Large packet TLS 1.2 AEAD shorter tag" \ "$P_SRV" \ "$P_CLI request_size=16384 force_version=tls1_2 \ force_ciphersuite=TLS-RSA-WITH-AES-256-CCM-8" \ 0 \ -s "Read from client: 16384 bytes read" # Tests for DTLS HelloVerifyRequest run_test "DTLS cookie: enabled" \ "$P_SRV dtls=1 debug_level=2" \ "$P_CLI dtls=1 debug_level=2" \ 0 \ -s "cookie verification failed" \ -s "cookie verification passed" \ -S "cookie verification skipped" \ -c "received hello verify request" \ -s "hello verification requested" \ -S "SSL - The requested feature is not available" run_test "DTLS cookie: disabled" \ "$P_SRV dtls=1 debug_level=2 cookies=0" \ "$P_CLI dtls=1 debug_level=2" \ 0 \ -S "cookie verification failed" \ -S "cookie verification passed" \ -s "cookie verification skipped" \ -C "received hello verify request" \ -S "hello verification requested" \ -S "SSL - The requested feature is not available" run_test "DTLS cookie: default (failing)" \ "$P_SRV dtls=1 debug_level=2 cookies=-1" \ "$P_CLI dtls=1 debug_level=2 hs_timeout=100-400" \ 1 \ -s "cookie verification failed" \ -S "cookie verification passed" \ -S "cookie verification skipped" \ -C "received hello verify request" \ -S "hello verification requested" \ -s "SSL - The requested feature is not available" requires_ipv6 run_test "DTLS cookie: enabled, IPv6" \ "$P_SRV dtls=1 debug_level=2 server_addr=::1" \ "$P_CLI dtls=1 debug_level=2 server_addr=::1" \ 0 \ -s "cookie verification failed" \ -s "cookie verification passed" \ -S "cookie verification skipped" \ -c "received hello verify request" \ -s "hello verification requested" \ -S "SSL - The requested feature is not available" run_test "DTLS cookie: enabled, nbio" \ "$P_SRV dtls=1 nbio=2 debug_level=2" \ "$P_CLI dtls=1 nbio=2 debug_level=2" \ 0 \ -s "cookie verification failed" \ -s "cookie verification passed" \ -S "cookie verification skipped" \ -c "received hello verify request" \ -s "hello verification requested" \ -S "SSL - The requested feature is not available" # Tests for various cases of client authentication with DTLS # (focused on handshake flows and message parsing) run_test "DTLS client auth: required" \ "$P_SRV dtls=1 auth_mode=required" \ "$P_CLI dtls=1" \ 0 \ -s "Verifying peer X.509 certificate... ok" run_test "DTLS client auth: optional, client has no cert" \ "$P_SRV dtls=1 auth_mode=optional" \ "$P_CLI dtls=1 crt_file=none key_file=none" \ 0 \ -s "! no client certificate sent" run_test "DTLS client auth: optional, client has no cert" \ "$P_SRV dtls=1 auth_mode=none" \ "$P_CLI dtls=1 crt_file=none key_file=none debug_level=2" \ 0 \ -c "skip write certificate$" \ -s "! no client certificate sent" # Tests for receiving fragmented handshake messages with DTLS requires_gnutls run_test "DTLS reassembly: no fragmentation (gnutls server)" \ "$G_SRV -u --mtu 2048 -a" \ "$P_CLI dtls=1 debug_level=2" \ 0 \ -C "found fragmented DTLS handshake message" \ -C "error" requires_gnutls run_test "DTLS reassembly: some fragmentation (gnutls server)" \ "$G_SRV -u --mtu 512" \ "$P_CLI dtls=1 debug_level=2" \ 0 \ -c "found fragmented DTLS handshake message" \ -C "error" requires_gnutls run_test "DTLS reassembly: more fragmentation (gnutls server)" \ "$G_SRV -u --mtu 128" \ "$P_CLI dtls=1 debug_level=2" \ 0 \ -c "found fragmented DTLS handshake message" \ -C "error" requires_gnutls run_test "DTLS reassembly: more fragmentation, nbio (gnutls server)" \ "$G_SRV -u --mtu 128" \ "$P_CLI dtls=1 nbio=2 debug_level=2" \ 0 \ -c "found fragmented DTLS handshake message" \ -C "error" requires_gnutls run_test "DTLS reassembly: fragmentation, renego (gnutls server)" \ "$G_SRV -u --mtu 256" \ "$P_CLI debug_level=3 dtls=1 renegotiation=1 renegotiate=1" \ 0 \ -c "found fragmented DTLS handshake message" \ -c "client hello, adding renegotiation extension" \ -c "found renegotiation extension" \ -c "=> renegotiate" \ -C "ssl_handshake returned" \ -C "error" \ -s "Extra-header:" requires_gnutls run_test "DTLS reassembly: fragmentation, nbio, renego (gnutls server)" \ "$G_SRV -u --mtu 256" \ "$P_CLI debug_level=3 nbio=2 dtls=1 renegotiation=1 renegotiate=1" \ 0 \ -c "found fragmented DTLS handshake message" \ -c "client hello, adding renegotiation extension" \ -c "found renegotiation extension" \ -c "=> renegotiate" \ -C "ssl_handshake returned" \ -C "error" \ -s "Extra-header:" run_test "DTLS reassembly: no fragmentation (openssl server)" \ "$O_SRV -dtls1 -mtu 2048" \ "$P_CLI dtls=1 debug_level=2" \ 0 \ -C "found fragmented DTLS handshake message" \ -C "error" run_test "DTLS reassembly: some fragmentation (openssl server)" \ "$O_SRV -dtls1 -mtu 768" \ "$P_CLI dtls=1 debug_level=2" \ 0 \ -c "found fragmented DTLS handshake message" \ -C "error" run_test "DTLS reassembly: more fragmentation (openssl server)" \ "$O_SRV -dtls1 -mtu 256" \ "$P_CLI dtls=1 debug_level=2" \ 0 \ -c "found fragmented DTLS handshake message" \ -C "error" run_test "DTLS reassembly: fragmentation, nbio (openssl server)" \ "$O_SRV -dtls1 -mtu 256" \ "$P_CLI dtls=1 nbio=2 debug_level=2" \ 0 \ -c "found fragmented DTLS handshake message" \ -C "error" # Tests for specific things with "unreliable" UDP connection not_with_valgrind # spurious resend due to timeout run_test "DTLS proxy: reference" \ -p "$P_PXY" \ "$P_SRV dtls=1 debug_level=2" \ "$P_CLI dtls=1 debug_level=2" \ 0 \ -C "replayed record" \ -S "replayed record" \ -C "record from another epoch" \ -S "record from another epoch" \ -C "discarding invalid record" \ -S "discarding invalid record" \ -S "resend" \ -s "Extra-header:" \ -c "HTTP/1.0 200 OK" not_with_valgrind # spurious resend due to timeout run_test "DTLS proxy: duplicate every packet" \ -p "$P_PXY duplicate=1" \ "$P_SRV dtls=1 debug_level=2" \ "$P_CLI dtls=1 debug_level=2" \ 0 \ -c "replayed record" \ -s "replayed record" \ -c "discarding invalid record" \ -s "discarding invalid record" \ -S "resend" \ -s "Extra-header:" \ -c "HTTP/1.0 200 OK" run_test "DTLS proxy: duplicate every packet, server anti-replay off" \ -p "$P_PXY duplicate=1" \ "$P_SRV dtls=1 debug_level=2 anti_replay=0" \ "$P_CLI dtls=1 debug_level=2" \ 0 \ -c "replayed record" \ -S "replayed record" \ -c "discarding invalid record" \ -s "discarding invalid record" \ -c "resend" \ -s "resend" \ -s "Extra-header:" \ -c "HTTP/1.0 200 OK" run_test "DTLS proxy: inject invalid AD record, default badmac_limit" \ -p "$P_PXY bad_ad=1" \ "$P_SRV dtls=1 debug_level=1" \ "$P_CLI dtls=1 debug_level=1 read_timeout=100" \ 0 \ -c "discarding invalid record (mac)" \ -s "discarding invalid record (mac)" \ -s "Extra-header:" \ -c "HTTP/1.0 200 OK" \ -S "too many records with bad MAC" \ -S "Verification of the message MAC failed" run_test "DTLS proxy: inject invalid AD record, badmac_limit 1" \ -p "$P_PXY bad_ad=1" \ "$P_SRV dtls=1 debug_level=1 badmac_limit=1" \ "$P_CLI dtls=1 debug_level=1 read_timeout=100" \ 1 \ -C "discarding invalid record (mac)" \ -S "discarding invalid record (mac)" \ -S "Extra-header:" \ -C "HTTP/1.0 200 OK" \ -s "too many records with bad MAC" \ -s "Verification of the message MAC failed" run_test "DTLS proxy: inject invalid AD record, badmac_limit 2" \ -p "$P_PXY bad_ad=1" \ "$P_SRV dtls=1 debug_level=1 badmac_limit=2" \ "$P_CLI dtls=1 debug_level=1 read_timeout=100" \ 0 \ -c "discarding invalid record (mac)" \ -s "discarding invalid record (mac)" \ -s "Extra-header:" \ -c "HTTP/1.0 200 OK" \ -S "too many records with bad MAC" \ -S "Verification of the message MAC failed" run_test "DTLS proxy: inject invalid AD record, badmac_limit 2, exchanges 2"\ -p "$P_PXY bad_ad=1" \ "$P_SRV dtls=1 debug_level=1 badmac_limit=2 exchanges=2" \ "$P_CLI dtls=1 debug_level=1 read_timeout=100 exchanges=2" \ 1 \ -c "discarding invalid record (mac)" \ -s "discarding invalid record (mac)" \ -s "Extra-header:" \ -c "HTTP/1.0 200 OK" \ -s "too many records with bad MAC" \ -s "Verification of the message MAC failed" run_test "DTLS proxy: delay ChangeCipherSpec" \ -p "$P_PXY delay_ccs=1" \ "$P_SRV dtls=1 debug_level=1" \ "$P_CLI dtls=1 debug_level=1" \ 0 \ -c "record from another epoch" \ -s "record from another epoch" \ -c "discarding invalid record" \ -s "discarding invalid record" \ -s "Extra-header:" \ -c "HTTP/1.0 200 OK" # Tests for "randomly unreliable connection": try a variety of flows and peers needs_more_time 2 run_test "DTLS proxy: 3d (drop, delay, duplicate), \"short\" PSK handshake" \ -p "$P_PXY drop=5 delay=5 duplicate=5" \ "$P_SRV dtls=1 hs_timeout=250-10000 tickets=0 auth_mode=none \ psk=abc123" \ "$P_CLI dtls=1 hs_timeout=250-10000 tickets=0 psk=abc123 \ force_ciphersuite=TLS-PSK-WITH-AES-128-CCM-8" \ 0 \ -s "Extra-header:" \ -c "HTTP/1.0 200 OK" needs_more_time 2 run_test "DTLS proxy: 3d, \"short\" RSA handshake" \ -p "$P_PXY drop=5 delay=5 duplicate=5" \ "$P_SRV dtls=1 hs_timeout=250-10000 tickets=0 auth_mode=none" \ "$P_CLI dtls=1 hs_timeout=250-10000 tickets=0 \ force_ciphersuite=TLS-RSA-WITH-AES-128-CBC-SHA" \ 0 \ -s "Extra-header:" \ -c "HTTP/1.0 200 OK" needs_more_time 2 run_test "DTLS proxy: 3d, \"short\" (no ticket, no cli_auth) FS handshake" \ -p "$P_PXY drop=5 delay=5 duplicate=5" \ "$P_SRV dtls=1 hs_timeout=250-10000 tickets=0 auth_mode=none" \ "$P_CLI dtls=1 hs_timeout=250-10000 tickets=0" \ 0 \ -s "Extra-header:" \ -c "HTTP/1.0 200 OK" needs_more_time 2 run_test "DTLS proxy: 3d, FS, client auth" \ -p "$P_PXY drop=5 delay=5 duplicate=5" \ "$P_SRV dtls=1 hs_timeout=250-10000 tickets=0 auth_mode=required" \ "$P_CLI dtls=1 hs_timeout=250-10000 tickets=0" \ 0 \ -s "Extra-header:" \ -c "HTTP/1.0 200 OK" needs_more_time 2 run_test "DTLS proxy: 3d, FS, ticket" \ -p "$P_PXY drop=5 delay=5 duplicate=5" \ "$P_SRV dtls=1 hs_timeout=250-10000 tickets=1 auth_mode=none" \ "$P_CLI dtls=1 hs_timeout=250-10000 tickets=1" \ 0 \ -s "Extra-header:" \ -c "HTTP/1.0 200 OK" needs_more_time 2 run_test "DTLS proxy: 3d, max handshake (FS, ticket + client auth)" \ -p "$P_PXY drop=5 delay=5 duplicate=5" \ "$P_SRV dtls=1 hs_timeout=250-10000 tickets=1 auth_mode=required" \ "$P_CLI dtls=1 hs_timeout=250-10000 tickets=1" \ 0 \ -s "Extra-header:" \ -c "HTTP/1.0 200 OK" needs_more_time 2 run_test "DTLS proxy: 3d, max handshake, nbio" \ -p "$P_PXY drop=5 delay=5 duplicate=5" \ "$P_SRV dtls=1 hs_timeout=250-10000 nbio=2 tickets=1 \ auth_mode=required" \ "$P_CLI dtls=1 hs_timeout=250-10000 nbio=2 tickets=1" \ 0 \ -s "Extra-header:" \ -c "HTTP/1.0 200 OK" needs_more_time 4 run_test "DTLS proxy: 3d, min handshake, resumption" \ -p "$P_PXY drop=5 delay=5 duplicate=5" \ "$P_SRV dtls=1 hs_timeout=250-10000 tickets=0 auth_mode=none \ psk=abc123 debug_level=3" \ "$P_CLI dtls=1 hs_timeout=250-10000 tickets=0 psk=abc123 \ debug_level=3 reconnect=1 read_timeout=1000 max_resend=10 \ force_ciphersuite=TLS-PSK-WITH-AES-128-CCM-8" \ 0 \ -s "a session has been resumed" \ -c "a session has been resumed" \ -s "Extra-header:" \ -c "HTTP/1.0 200 OK" needs_more_time 4 run_test "DTLS proxy: 3d, min handshake, resumption, nbio" \ -p "$P_PXY drop=5 delay=5 duplicate=5" \ "$P_SRV dtls=1 hs_timeout=250-10000 tickets=0 auth_mode=none \ psk=abc123 debug_level=3 nbio=2" \ "$P_CLI dtls=1 hs_timeout=250-10000 tickets=0 psk=abc123 \ debug_level=3 reconnect=1 read_timeout=1000 max_resend=10 \ force_ciphersuite=TLS-PSK-WITH-AES-128-CCM-8 nbio=2" \ 0 \ -s "a session has been resumed" \ -c "a session has been resumed" \ -s "Extra-header:" \ -c "HTTP/1.0 200 OK" needs_more_time 4 run_test "DTLS proxy: 3d, min handshake, client-initiated renego" \ -p "$P_PXY drop=5 delay=5 duplicate=5" \ "$P_SRV dtls=1 hs_timeout=250-10000 tickets=0 auth_mode=none \ psk=abc123 renegotiation=1 debug_level=2" \ "$P_CLI dtls=1 hs_timeout=250-10000 tickets=0 psk=abc123 \ renegotiate=1 debug_level=2 \ force_ciphersuite=TLS-PSK-WITH-AES-128-CCM-8" \ 0 \ -c "=> renegotiate" \ -s "=> renegotiate" \ -s "Extra-header:" \ -c "HTTP/1.0 200 OK" needs_more_time 4 run_test "DTLS proxy: 3d, min handshake, client-initiated renego, nbio" \ -p "$P_PXY drop=5 delay=5 duplicate=5" \ "$P_SRV dtls=1 hs_timeout=250-10000 tickets=0 auth_mode=none \ psk=abc123 renegotiation=1 debug_level=2" \ "$P_CLI dtls=1 hs_timeout=250-10000 tickets=0 psk=abc123 \ renegotiate=1 debug_level=2 \ force_ciphersuite=TLS-PSK-WITH-AES-128-CCM-8" \ 0 \ -c "=> renegotiate" \ -s "=> renegotiate" \ -s "Extra-header:" \ -c "HTTP/1.0 200 OK" needs_more_time 4 run_test "DTLS proxy: 3d, min handshake, server-initiated renego" \ -p "$P_PXY drop=5 delay=5 duplicate=5" \ "$P_SRV dtls=1 hs_timeout=250-10000 tickets=0 auth_mode=none \ psk=abc123 renegotiate=1 renegotiation=1 exchanges=4 \ debug_level=2" \ "$P_CLI dtls=1 hs_timeout=250-10000 tickets=0 psk=abc123 \ renegotiation=1 exchanges=4 debug_level=2 \ force_ciphersuite=TLS-PSK-WITH-AES-128-CCM-8" \ 0 \ -c "=> renegotiate" \ -s "=> renegotiate" \ -s "Extra-header:" \ -c "HTTP/1.0 200 OK" needs_more_time 4 run_test "DTLS proxy: 3d, min handshake, server-initiated renego, nbio" \ -p "$P_PXY drop=5 delay=5 duplicate=5" \ "$P_SRV dtls=1 hs_timeout=250-10000 tickets=0 auth_mode=none \ psk=abc123 renegotiate=1 renegotiation=1 exchanges=4 \ debug_level=2 nbio=2" \ "$P_CLI dtls=1 hs_timeout=250-10000 tickets=0 psk=abc123 \ renegotiation=1 exchanges=4 debug_level=2 nbio=2 \ force_ciphersuite=TLS-PSK-WITH-AES-128-CCM-8" \ 0 \ -c "=> renegotiate" \ -s "=> renegotiate" \ -s "Extra-header:" \ -c "HTTP/1.0 200 OK" needs_more_time 6 run_test "DTLS proxy: 3d, openssl server" \ -p "$P_PXY drop=5 delay=5 duplicate=5 protect_hvr=1" \ "$O_SRV -dtls1 -mtu 2048" \ "$P_CLI dtls=1 hs_timeout=250-60000" \ 0 \ -s "Extra-header:" \ -c "HTTP/1.0 200 OK" needs_more_time 6 run_test "DTLS proxy: 3d, openssl server, fragmentation" \ -p "$P_PXY drop=5 delay=5 duplicate=5 protect_hvr=1" \ "$O_SRV -dtls1 -mtu 768" \ "$P_CLI dtls=1 hs_timeout=250-60000" \ 0 \ -s "Extra-header:" \ -c "HTTP/1.0 200 OK" needs_more_time 6 run_test "DTLS proxy: 3d, openssl server, fragmentation, nbio" \ -p "$P_PXY drop=5 delay=5 duplicate=5 protect_hvr=1" \ "$O_SRV -dtls1 -mtu 768" \ "$P_CLI dtls=1 hs_timeout=250-60000 nbio=2" \ 0 \ -s "Extra-header:" \ -c "HTTP/1.0 200 OK" needs_more_time 6 run_test "DTLS proxy: 3d, gnutls server" \ -p "$P_PXY drop=5 delay=5 duplicate=5" \ "$G_SRV -u --mtu 2048 -a" \ "$P_CLI dtls=1 hs_timeout=250-60000" \ 0 \ -s "Extra-header:" \ -c "Extra-header:" needs_more_time 6 run_test "DTLS proxy: 3d, gnutls server, fragmentation" \ -p "$P_PXY drop=5 delay=5 duplicate=5" \ "$G_SRV -u --mtu 512" \ "$P_CLI dtls=1 hs_timeout=250-60000" \ 0 \ -s "Extra-header:" \ -c "Extra-header:" needs_more_time 6 run_test "DTLS proxy: 3d, gnutls server, fragmentation, nbio" \ -p "$P_PXY drop=5 delay=5 duplicate=5" \ "$G_SRV -u --mtu 512" \ "$P_CLI dtls=1 hs_timeout=250-60000 nbio=2" \ 0 \ -s "Extra-header:" \ -c "Extra-header:" # Final report echo "------------------------------------------------------------------------" if [ $FAILS = 0 ]; then printf "PASSED" else printf "FAILED" fi PASSES=$(( $TESTS - $FAILS )) echo " ($PASSES / $TESTS tests ($SKIPS skipped))" exit $FAILS