mbedtls/library/psa_crypto_mac.h
Ronald Cron 5601cd2cf1 psa: test driver: Move driver test entry points prototypes
In preparation of the driver test entry points to be
provided by a test driver library, move their prototypes
to tests directory.

Signed-off-by: Ronald Cron <ronald.cron@arm.com>
2021-12-06 07:50:27 +01:00

277 lines
12 KiB
C

/*
* PSA MAC layer on top of Mbed TLS software crypto
*/
/*
* Copyright The Mbed TLS Contributors
* SPDX-License-Identifier: Apache-2.0
*
* Licensed under the Apache License, Version 2.0 (the "License"); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#ifndef PSA_CRYPTO_MAC_H
#define PSA_CRYPTO_MAC_H
#include <psa/crypto.h>
/** Calculate the MAC (message authentication code) of a message using Mbed TLS.
*
* \note The signature of this function is that of a PSA driver mac_compute
* entry point. This function behaves as a mac_compute entry point as
* defined in the PSA driver interface specification for transparent
* drivers.
*
* \param[in] attributes The attributes of the key to use for the
* operation.
* \param[in] key_buffer The buffer containing the key to use for
* computing the MAC. This buffer contains the key
* in export representation as defined by
* psa_export_key() (i.e. the raw key bytes).
* \param key_buffer_size Size of the \p key_buffer buffer in bytes.
* \param alg The MAC algorithm to use (\c PSA_ALG_XXX value
* such that #PSA_ALG_IS_MAC(\p alg) is true).
* \param[in] input Buffer containing the input message.
* \param input_length Size of the \p input buffer in bytes.
* \param[out] mac Buffer where the MAC value is to be written.
* \param mac_size Size of the \p mac buffer in bytes.
* \param[out] mac_length On success, the number of bytes
* that make up the MAC value.
*
* \retval #PSA_SUCCESS
* Success.
* \retval #PSA_ERROR_NOT_SUPPORTED
* \p alg is not supported.
* \retval #PSA_ERROR_BUFFER_TOO_SMALL
* \p mac_size is too small
* \retval #PSA_ERROR_INSUFFICIENT_MEMORY
* \retval #PSA_ERROR_CORRUPTION_DETECTED
*/
psa_status_t mbedtls_psa_mac_compute(
const psa_key_attributes_t *attributes,
const uint8_t *key_buffer,
size_t key_buffer_size,
psa_algorithm_t alg,
const uint8_t *input,
size_t input_length,
uint8_t *mac,
size_t mac_size,
size_t *mac_length);
/** Set up a multipart MAC calculation operation using Mbed TLS.
*
* \note The signature of this function is that of a PSA driver mac_sign_setup
* entry point. This function behaves as a mac_sign_setup entry point as
* defined in the PSA driver interface specification for transparent
* drivers.
*
* \param[in,out] operation The operation object to set up. It must have
* been initialized and not yet in use.
* \param[in] attributes The attributes of the key to use for the
* operation.
* \param[in] key_buffer The buffer containing the key to use for
* computing the MAC. This buffer contains the key
* in export representation as defined by
* psa_export_key() (i.e. the raw key bytes).
* \param key_buffer_size Size of the \p key_buffer buffer in bytes.
* \param alg The MAC algorithm to use (\c PSA_ALG_XXX value
* such that #PSA_ALG_IS_MAC(\p alg) is true).
*
* \retval #PSA_SUCCESS
* Success.
* \retval #PSA_ERROR_NOT_SUPPORTED
* \p alg is not supported.
* \retval #PSA_ERROR_INSUFFICIENT_MEMORY
* \retval #PSA_ERROR_CORRUPTION_DETECTED
* \retval #PSA_ERROR_BAD_STATE
* The operation state is not valid (it must be inactive).
*/
psa_status_t mbedtls_psa_mac_sign_setup(
mbedtls_psa_mac_operation_t *operation,
const psa_key_attributes_t *attributes,
const uint8_t *key_buffer,
size_t key_buffer_size,
psa_algorithm_t alg);
/** Set up a multipart MAC verification operation using Mbed TLS.
*
* \note The signature of this function is that of a PSA driver mac_verify_setup
* entry point. This function behaves as a mac_verify_setup entry point as
* defined in the PSA driver interface specification for transparent
* drivers.
*
* \param[in,out] operation The operation object to set up. It must have
* been initialized and not yet in use.
* \param[in] attributes The attributes of the key to use for the
* operation.
* \param[in] key_buffer The buffer containing the key to use for
* computing the MAC. This buffer contains the key
* in export representation as defined by
* psa_export_key() (i.e. the raw key bytes).
* \param key_buffer_size Size of the \p key_buffer buffer in bytes.
* \param alg The MAC algorithm to use (\c PSA_ALG_XXX value
* such that #PSA_ALG_IS_MAC(\p alg) is true).
*
* \retval #PSA_SUCCESS
* Success.
* \retval #PSA_ERROR_NOT_SUPPORTED
* \p alg is not supported.
* \retval #PSA_ERROR_INSUFFICIENT_MEMORY
* \retval #PSA_ERROR_CORRUPTION_DETECTED
* \retval #PSA_ERROR_BAD_STATE
* The operation state is not valid (it must be inactive).
*/
psa_status_t mbedtls_psa_mac_verify_setup(
mbedtls_psa_mac_operation_t *operation,
const psa_key_attributes_t *attributes,
const uint8_t *key_buffer,
size_t key_buffer_size,
psa_algorithm_t alg);
/** Add a message fragment to a multipart MAC operation using Mbed TLS.
*
* \note The signature of this function is that of a PSA driver mac_update
* entry point. This function behaves as a mac_update entry point as
* defined in the PSA driver interface specification for transparent
* drivers.
*
* The PSA core calls mbedtls_psa_mac_sign_setup() or
* mbedtls_psa_mac_verify_setup() before calling this function.
*
* If this function returns an error status, the PSA core aborts the
* operation by calling mbedtls_psa_mac_abort().
*
* \param[in,out] operation Active MAC operation.
* \param[in] input Buffer containing the message fragment to add to
* the MAC calculation.
* \param input_length Size of the \p input buffer in bytes.
*
* \retval #PSA_SUCCESS
* Success.
* \retval #PSA_ERROR_BAD_STATE
* The operation state is not valid (it must be active).
* \retval #PSA_ERROR_INSUFFICIENT_MEMORY
* \retval #PSA_ERROR_CORRUPTION_DETECTED
*/
psa_status_t mbedtls_psa_mac_update(
mbedtls_psa_mac_operation_t *operation,
const uint8_t *input,
size_t input_length );
/** Finish the calculation of the MAC of a message using Mbed TLS.
*
* \note The signature of this function is that of a PSA driver mac_sign_finish
* entry point. This function behaves as a mac_sign_finish entry point as
* defined in the PSA driver interface specification for transparent
* drivers.
*
* The PSA core calls mbedtls_psa_mac_sign_setup() before calling this function.
* This function calculates the MAC of the message formed by concatenating
* the inputs passed to preceding calls to mbedtls_psa_mac_update().
*
* Whether this function returns successfully or not, the PSA core subsequently
* aborts the operation by calling mbedtls_psa_mac_abort().
*
* \param[in,out] operation Active MAC operation.
* \param[out] mac Buffer where the MAC value is to be written.
* \param mac_size Output size requested for the MAC algorithm. The PSA
* core guarantees this is a valid MAC length for the
* algorithm and key combination passed to
* mbedtls_psa_mac_sign_setup(). It also guarantees the
* \p mac buffer is large enough to contain the
* requested output size.
* \param[out] mac_length On success, the number of bytes output to buffer
* \p mac, which will be equal to the requested length
* \p mac_size.
*
* \retval #PSA_SUCCESS
* Success.
* \retval #PSA_ERROR_BAD_STATE
* The operation state is not valid (it must be an active mac sign
* operation).
* \retval #PSA_ERROR_BUFFER_TOO_SMALL
* The size of the \p mac buffer is too small. A sufficient buffer size
* can be determined by calling PSA_MAC_LENGTH().
* \retval #PSA_ERROR_INSUFFICIENT_MEMORY
* \retval #PSA_ERROR_CORRUPTION_DETECTED
*/
psa_status_t mbedtls_psa_mac_sign_finish(
mbedtls_psa_mac_operation_t *operation,
uint8_t *mac,
size_t mac_size,
size_t *mac_length );
/** Finish the calculation of the MAC of a message and compare it with
* an expected value using Mbed TLS.
*
* \note The signature of this function is that of a PSA driver
* mac_verify_finish entry point. This function behaves as a
* mac_verify_finish entry point as defined in the PSA driver interface
* specification for transparent drivers.
*
* The PSA core calls mbedtls_psa_mac_verify_setup() before calling this
* function. This function calculates the MAC of the message formed by
* concatenating the inputs passed to preceding calls to
* mbedtls_psa_mac_update(). It then compares the calculated MAC with the
* expected MAC passed as a parameter to this function.
*
* Whether this function returns successfully or not, the PSA core subsequently
* aborts the operation by calling mbedtls_psa_mac_abort().
*
* \param[in,out] operation Active MAC operation.
* \param[in] mac Buffer containing the expected MAC value.
* \param mac_length Length in bytes of the expected MAC value. The PSA
* core guarantees that this length is a valid MAC
* length for the algorithm and key combination passed
* to mbedtls_psa_mac_verify_setup().
*
* \retval #PSA_SUCCESS
* The expected MAC is identical to the actual MAC of the message.
* \retval #PSA_ERROR_INVALID_SIGNATURE
* The MAC of the message was calculated successfully, but it
* differs from the expected MAC.
* \retval #PSA_ERROR_BAD_STATE
* The operation state is not valid (it must be an active mac verify
* operation).
* \retval #PSA_ERROR_INSUFFICIENT_MEMORY
* \retval #PSA_ERROR_CORRUPTION_DETECTED
*/
psa_status_t mbedtls_psa_mac_verify_finish(
mbedtls_psa_mac_operation_t *operation,
const uint8_t *mac,
size_t mac_length );
/** Abort a MAC operation using Mbed TLS.
*
* Aborting an operation frees all associated resources except for the
* \p operation structure itself. Once aborted, the operation object
* can be reused for another operation by calling
* mbedtls_psa_mac_sign_setup() or mbedtls_psa_mac_verify_setup() again.
*
* The PSA core may call this function any time after the operation object has
* been initialized by one of the methods described in
* #mbedtls_psa_mac_operation_t.
*
* In particular, calling mbedtls_psa_mac_abort() after the operation has been
* terminated by a call to mbedtls_psa_mac_abort(),
* mbedtls_psa_mac_sign_finish() or mbedtls_psa_mac_verify_finish() is safe and
* has no effect.
*
* \param[in,out] operation Initialized MAC operation.
*
* \retval #PSA_SUCCESS
* \retval #PSA_ERROR_CORRUPTION_DETECTED
*/
psa_status_t mbedtls_psa_mac_abort(
mbedtls_psa_mac_operation_t *operation );
#endif /* PSA_CRYPTO_MAC_H */