AuroraMiddleware/mbedtls
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
39461b04f6
mbedtls/tests/compat.sh
Gilles Peskine 6eece5b666 Exclude DTLS 1.2 only with older OpenSSL 
compat.sh used to skip OpenSSL altogether for DTLS 1.2, because older
versions of OpenSSL didn't support it. But these days it is supported.

We don't want to use DTLS 1.2 with OpenSSL unconditionally, because we
still use legacy versions of OpenSSL to test with legacy ciphers. So
check whether the version we're using supports it.
2019-08-13 10:36:14 +02:00

1418 lines
54 KiB
Bash
Executable File
Raw Blame History

#!/bin/sh
# compat.sh
#
# This file is part of mbed TLS (https://tls.mbed.org)
#
# Copyright (c) 2012-2016, ARM Limited, All Rights Reserved
#
# Purpose
#
# Test interoperbility with OpenSSL, GnuTLS as well as itself.
#
# Check each common ciphersuite, with each version, both ways (client/server),
# with and without client authentication.
set -u
# Limit the size of each log to 10 GiB, in case of failures with this script
# where it may output seemingly unlimited length error logs.
ulimit -f 20971520
# initialise counters
TESTS=0
FAILED=0
SKIPPED=0
SRVMEM=0
# default commands, can be overridden by the environment
: ${M_SRV:=../programs/ssl/ssl_server2}
: ${M_CLI:=../programs/ssl/ssl_client2}
: ${OPENSSL_CMD:=openssl} # OPENSSL would conflict with the build system
: ${GNUTLS_CLI:=gnutls-cli}
: ${GNUTLS_SERV:=gnutls-serv}
# do we have a recent enough GnuTLS?
if ( which $GNUTLS_CLI && which $GNUTLS_SERV ) >/dev/null 2>&1; then
G_VER="$( $GNUTLS_CLI --version | head -n1 )"
if echo "$G_VER" | grep '@VERSION@' > /dev/null; then # git version
PEER_GNUTLS=" GnuTLS"
else
eval $( echo $G_VER | sed 's/.* \([0-9]*\)\.\([0-9]\)*\.\([0-9]*\)$/MAJOR="\1" MINOR="\2" PATCH="\3"/' )
if [ $MAJOR -lt 3 -o \
\( $MAJOR -eq 3 -a $MINOR -lt 2 \) -o \
\( $MAJOR -eq 3 -a $MINOR -eq 2 -a $PATCH -lt 15 \) ]
then
PEER_GNUTLS=""
else
PEER_GNUTLS=" GnuTLS"
if [ $MINOR -lt 4 ]; then
GNUTLS_MINOR_LT_FOUR='x'
fi
fi
fi
else
PEER_GNUTLS=""
fi
# default values for options
MODES="tls1 tls1_1 tls1_2 dtls1 dtls1_2"
VERIFIES="NO YES"
TYPES="ECDSA RSA PSK"
FILTER=""
# exclude:
# - NULL: excluded from our default config
# - RC4, single-DES: requires legacy OpenSSL/GnuTLS versions
# avoid plain DES but keep 3DES-EDE-CBC (mbedTLS), DES-CBC3 (OpenSSL)
# - ARIA: not in default config.h + requires OpenSSL >= 1.1.1
# - ChachaPoly: requires OpenSSL >= 1.1.0
# - 3DES: not in default config
EXCLUDE='NULL\|DES\|RC4\|ARCFOUR\|ARIA\|CHACHA20-POLY1305'
VERBOSE=""
MEMCHECK=0
PEERS="OpenSSL$PEER_GNUTLS mbedTLS"
# hidden option: skip DTLS with OpenSSL
# (travis CI has a version that doesn't work for us)
: ${OSSL_NO_DTLS:=0}
print_usage() {
echo "Usage: $0"
printf " -h|--help\tPrint this help.\n"
printf " -f|--filter\tOnly matching ciphersuites are tested (Default: '$FILTER')\n"
printf " -e|--exclude\tMatching ciphersuites are excluded (Default: '$EXCLUDE')\n"
printf " -m|--modes\tWhich modes to perform (Default: '$MODES')\n"
printf " -t|--types\tWhich key exchange type to perform (Default: '$TYPES')\n"
printf " -V|--verify\tWhich verification modes to perform (Default: '$VERIFIES')\n"
printf " -p|--peers\tWhich peers to use (Default: '$PEERS')\n"
printf " \tAlso available: GnuTLS (needs v3.2.15 or higher)\n"
printf " -M|--memcheck\tCheck memory leaks and errors.\n"
printf " -v|--verbose\tSet verbose output.\n"
}
get_options() {
while [ $# -gt 0 ]; do
case "$1" in
-f|--filter)
shift; FILTER=$1
;;
-e|--exclude)
shift; EXCLUDE=$1
;;
-m|--modes)
shift; MODES=$1
;;
-t|--types)
shift; TYPES=$1
;;
-V|--verify)
shift; VERIFIES=$1
;;
-p|--peers)
shift; PEERS=$1
;;
-v|--verbose)
VERBOSE=1
;;
-M|--memcheck)
MEMCHECK=1
;;
-h|--help)
print_usage
exit 0
;;
*)
echo "Unknown argument: '$1'"
print_usage
exit 1
;;
esac
shift
done
# sanitize some options (modes checked later)
VERIFIES="$( echo $VERIFIES | tr [a-z] [A-Z] )"
TYPES="$( echo $TYPES | tr [a-z] [A-Z] )"
}
log() {
if [ "X" != "X$VERBOSE" ]; then
echo ""
echo "$@"
fi
}
# is_dtls <mode>
is_dtls()
{
test "$1" = "dtls1" -o "$1" = "dtls1_2"
}
# minor_ver <mode>
minor_ver()
{
case "$1" in
ssl3)
echo 0
;;
tls1)
echo 1
;;
tls1_1|dtls1)
echo 2
;;
tls1_2|dtls1_2)
echo 3
;;
*)
echo "error: invalid mode: $MODE" >&2
# exiting is no good here, typically called in a subshell
echo -1
esac
}
filter()
{
LIST="$1"
NEW_LIST=""
if is_dtls "$MODE"; then
EXCLMODE="$EXCLUDE"'\|RC4\|ARCFOUR'
else
EXCLMODE="$EXCLUDE"
fi
for i in $LIST;
do
NEW_LIST="$NEW_LIST $( echo "$i" | grep "$FILTER" | grep -v "$EXCLMODE" )"
done
# normalize whitespace
echo "$NEW_LIST" | sed -e 's/[[:space:]][[:space:]]*/ /g' -e 's/^ //' -e 's/ $//'
}
# OpenSSL 1.0.1h with -Verify wants a ClientCertificate message even for
# PSK ciphersuites with DTLS, which is incorrect, so disable them for now
check_openssl_server_bug()
{
if test "X$VERIFY" = "XYES" && is_dtls "$MODE" && \
echo "$1" | grep "^TLS-PSK" >/dev/null;
then
SKIP_NEXT="YES"
fi
}
filter_ciphersuites()
{
if [ "X" != "X$FILTER" -o "X" != "X$EXCLUDE" ];
then
# Ciphersuite for mbed TLS
M_CIPHERS=$( filter "$M_CIPHERS" )
# Ciphersuite for OpenSSL
O_CIPHERS=$( filter "$O_CIPHERS" )
# Ciphersuite for GnuTLS
G_CIPHERS=$( filter "$G_CIPHERS" )
fi
# OpenSSL <1.0.2 doesn't support DTLS 1.2. Check what OpenSSL
# supports from the s_server help. (The s_client help isn't
# accurate as of 1.0.2g: it supports DTLS 1.2 but doesn't list it.
# But the s_server help seems to be accurate.)
if ! $OPENSSL_CMD s_server -help 2>&1 | grep -q "^ *-$MODE "; then
M_CIPHERS=""
O_CIPHERS=""
fi
# For GnuTLS client -> mbed TLS server,
# we need to force IPv4 by connecting to 127.0.0.1 but then auth fails
if [ "X$VERIFY" = "XYES" ] && is_dtls "$MODE"; then
G_CIPHERS=""
fi
}
reset_ciphersuites()
{
M_CIPHERS=""
O_CIPHERS=""
G_CIPHERS=""
}
# Ciphersuites that can be used with all peers.
# Since we currently have three possible peers, each ciphersuite should appear
# three times: in each peer's list (with the name that this peer uses).
add_common_ciphersuites()
{
case $TYPE in
"ECDSA")
if [ `minor_ver "$MODE"` -gt 0 ]
then
M_CIPHERS="$M_CIPHERS \
TLS-ECDHE-ECDSA-WITH-NULL-SHA \
TLS-ECDHE-ECDSA-WITH-RC4-128-SHA \
TLS-ECDHE-ECDSA-WITH-3DES-EDE-CBC-SHA \
TLS-ECDHE-ECDSA-WITH-AES-128-CBC-SHA \
TLS-ECDHE-ECDSA-WITH-AES-256-CBC-SHA \
"
G_CIPHERS="$G_CIPHERS \
+ECDHE-ECDSA:+NULL:+SHA1 \
+ECDHE-ECDSA:+ARCFOUR-128:+SHA1 \
+ECDHE-ECDSA:+3DES-CBC:+SHA1 \
+ECDHE-ECDSA:+AES-128-CBC:+SHA1 \
+ECDHE-ECDSA:+AES-256-CBC:+SHA1 \
"
O_CIPHERS="$O_CIPHERS \
ECDHE-ECDSA-NULL-SHA \
ECDHE-ECDSA-RC4-SHA \
ECDHE-ECDSA-DES-CBC3-SHA \
ECDHE-ECDSA-AES128-SHA \
ECDHE-ECDSA-AES256-SHA \
"
fi
if [ `minor_ver "$MODE"` -ge 3 ]
then
M_CIPHERS="$M_CIPHERS \
TLS-ECDHE-ECDSA-WITH-AES-128-CBC-SHA256 \
TLS-ECDHE-ECDSA-WITH-AES-256-CBC-SHA384 \
TLS-ECDHE-ECDSA-WITH-AES-128-GCM-SHA256 \
TLS-ECDHE-ECDSA-WITH-AES-256-GCM-SHA384 \
"
G_CIPHERS="$G_CIPHERS \
+ECDHE-ECDSA:+AES-128-CBC:+SHA256 \
+ECDHE-ECDSA:+AES-256-CBC:+SHA384 \
+ECDHE-ECDSA:+AES-128-GCM:+AEAD \
+ECDHE-ECDSA:+AES-256-GCM:+AEAD \
"
O_CIPHERS="$O_CIPHERS \
ECDHE-ECDSA-AES128-SHA256 \
ECDHE-ECDSA-AES256-SHA384 \
ECDHE-ECDSA-AES128-GCM-SHA256 \
ECDHE-ECDSA-AES256-GCM-SHA384 \
"
fi
;;
"RSA")
M_CIPHERS="$M_CIPHERS \
TLS-DHE-RSA-WITH-AES-128-CBC-SHA \
TLS-DHE-RSA-WITH-AES-256-CBC-SHA \
TLS-DHE-RSA-WITH-CAMELLIA-128-CBC-SHA \
TLS-DHE-RSA-WITH-CAMELLIA-256-CBC-SHA \
TLS-DHE-RSA-WITH-3DES-EDE-CBC-SHA \
TLS-RSA-WITH-AES-256-CBC-SHA \
TLS-RSA-WITH-CAMELLIA-256-CBC-SHA \
TLS-RSA-WITH-AES-128-CBC-SHA \
TLS-RSA-WITH-CAMELLIA-128-CBC-SHA \
TLS-RSA-WITH-3DES-EDE-CBC-SHA \
TLS-RSA-WITH-RC4-128-SHA \
TLS-RSA-WITH-RC4-128-MD5 \
TLS-RSA-WITH-NULL-MD5 \
TLS-RSA-WITH-NULL-SHA \
"
G_CIPHERS="$G_CIPHERS \
+DHE-RSA:+AES-128-CBC:+SHA1 \
+DHE-RSA:+AES-256-CBC:+SHA1 \
+DHE-RSA:+CAMELLIA-128-CBC:+SHA1 \
+DHE-RSA:+CAMELLIA-256-CBC:+SHA1 \
+DHE-RSA:+3DES-CBC:+SHA1 \
+RSA:+AES-256-CBC:+SHA1 \
+RSA:+CAMELLIA-256-CBC:+SHA1 \
+RSA:+AES-128-CBC:+SHA1 \
+RSA:+CAMELLIA-128-CBC:+SHA1 \
+RSA:+3DES-CBC:+SHA1 \
+RSA:+ARCFOUR-128:+SHA1 \
+RSA:+ARCFOUR-128:+MD5 \
+RSA:+NULL:+MD5 \
+RSA:+NULL:+SHA1 \
"
O_CIPHERS="$O_CIPHERS \
DHE-RSA-AES128-SHA \
DHE-RSA-AES256-SHA \
DHE-RSA-CAMELLIA128-SHA \
DHE-RSA-CAMELLIA256-SHA \
EDH-RSA-DES-CBC3-SHA \
AES256-SHA \
CAMELLIA256-SHA \
AES128-SHA \
CAMELLIA128-SHA \
DES-CBC3-SHA \
RC4-SHA \
RC4-MD5 \
NULL-MD5 \
NULL-SHA \
"
if [ `minor_ver "$MODE"` -gt 0 ]
then
M_CIPHERS="$M_CIPHERS \
TLS-ECDHE-RSA-WITH-AES-128-CBC-SHA \
TLS-ECDHE-RSA-WITH-AES-256-CBC-SHA \
TLS-ECDHE-RSA-WITH-3DES-EDE-CBC-SHA \
TLS-ECDHE-RSA-WITH-RC4-128-SHA \
TLS-ECDHE-RSA-WITH-NULL-SHA \
"
G_CIPHERS="$G_CIPHERS \
+ECDHE-RSA:+AES-128-CBC:+SHA1 \
+ECDHE-RSA:+AES-256-CBC:+SHA1 \
+ECDHE-RSA:+3DES-CBC:+SHA1 \
+ECDHE-RSA:+ARCFOUR-128:+SHA1 \
+ECDHE-RSA:+NULL:+SHA1 \
"
O_CIPHERS="$O_CIPHERS \
ECDHE-RSA-AES256-SHA \
ECDHE-RSA-AES128-SHA \
ECDHE-RSA-DES-CBC3-SHA \
ECDHE-RSA-RC4-SHA \
ECDHE-RSA-NULL-SHA \
"
fi
if [ `minor_ver "$MODE"` -ge 3 ]
then
M_CIPHERS="$M_CIPHERS \
TLS-RSA-WITH-AES-128-CBC-SHA256 \
TLS-DHE-RSA-WITH-AES-128-CBC-SHA256 \
TLS-RSA-WITH-AES-256-CBC-SHA256 \
TLS-DHE-RSA-WITH-AES-256-CBC-SHA256 \
TLS-ECDHE-RSA-WITH-AES-128-CBC-SHA256 \
TLS-ECDHE-RSA-WITH-AES-256-CBC-SHA384 \
TLS-RSA-WITH-AES-128-GCM-SHA256 \
TLS-RSA-WITH-AES-256-GCM-SHA384 \
TLS-DHE-RSA-WITH-AES-128-GCM-SHA256 \
TLS-DHE-RSA-WITH-AES-256-GCM-SHA384 \
TLS-ECDHE-RSA-WITH-AES-128-GCM-SHA256 \
TLS-ECDHE-RSA-WITH-AES-256-GCM-SHA384 \
"
G_CIPHERS="$G_CIPHERS \
+RSA:+AES-128-CBC:+SHA256 \
+DHE-RSA:+AES-128-CBC:+SHA256 \
+RSA:+AES-256-CBC:+SHA256 \
+DHE-RSA:+AES-256-CBC:+SHA256 \
+ECDHE-RSA:+AES-128-CBC:+SHA256 \
+ECDHE-RSA:+AES-256-CBC:+SHA384 \
+RSA:+AES-128-GCM:+AEAD \
+RSA:+AES-256-GCM:+AEAD \
+DHE-RSA:+AES-128-GCM:+AEAD \
+DHE-RSA:+AES-256-GCM:+AEAD \
+ECDHE-RSA:+AES-128-GCM:+AEAD \
+ECDHE-RSA:+AES-256-GCM:+AEAD \
"
O_CIPHERS="$O_CIPHERS \
NULL-SHA256 \
AES128-SHA256 \
DHE-RSA-AES128-SHA256 \
AES256-SHA256 \
DHE-RSA-AES256-SHA256 \
ECDHE-RSA-AES128-SHA256 \
ECDHE-RSA-AES256-SHA384 \
AES128-GCM-SHA256 \
DHE-RSA-AES128-GCM-SHA256 \
AES256-GCM-SHA384 \
DHE-RSA-AES256-GCM-SHA384 \
ECDHE-RSA-AES128-GCM-SHA256 \
ECDHE-RSA-AES256-GCM-SHA384 \
"
fi
;;
"PSK")
M_CIPHERS="$M_CIPHERS \
TLS-PSK-WITH-RC4-128-SHA \
TLS-PSK-WITH-3DES-EDE-CBC-SHA \
TLS-PSK-WITH-AES-128-CBC-SHA \
TLS-PSK-WITH-AES-256-CBC-SHA \
"
G_CIPHERS="$G_CIPHERS \
+PSK:+ARCFOUR-128:+SHA1 \
+PSK:+3DES-CBC:+SHA1 \
+PSK:+AES-128-CBC:+SHA1 \
+PSK:+AES-256-CBC:+SHA1 \
"
O_CIPHERS="$O_CIPHERS \
PSK-RC4-SHA \
PSK-3DES-EDE-CBC-SHA \
PSK-AES128-CBC-SHA \
PSK-AES256-CBC-SHA \
"
;;
esac
}
# Ciphersuites usable only with Mbed TLS and OpenSSL
# Each ciphersuite should appear two times, once with its OpenSSL name, once
# with its Mbed TLS name.
#
# NOTE: for some reason RSA-PSK doesn't work with OpenSSL,
# so RSA-PSK ciphersuites need to go in other sections, see
# https://github.com/ARMmbed/mbedtls/issues/1419
#
# ChachaPoly suites are here rather than in "common", as they were added in
# GnuTLS in 3.5.0 and the CI only has 3.4.x so far.
add_openssl_ciphersuites()
{
case $TYPE in
"ECDSA")
if [ `minor_ver "$MODE"` -gt 0 ]
then
M_CIPHERS="$M_CIPHERS \
TLS-ECDH-ECDSA-WITH-NULL-SHA \
TLS-ECDH-ECDSA-WITH-RC4-128-SHA \
TLS-ECDH-ECDSA-WITH-3DES-EDE-CBC-SHA \
TLS-ECDH-ECDSA-WITH-AES-128-CBC-SHA \
TLS-ECDH-ECDSA-WITH-AES-256-CBC-SHA \
"
O_CIPHERS="$O_CIPHERS \
ECDH-ECDSA-NULL-SHA \
ECDH-ECDSA-RC4-SHA \
ECDH-ECDSA-DES-CBC3-SHA \
ECDH-ECDSA-AES128-SHA \
ECDH-ECDSA-AES256-SHA \
"
fi
if [ `minor_ver "$MODE"` -ge 3 ]
then
M_CIPHERS="$M_CIPHERS \
TLS-ECDH-ECDSA-WITH-AES-128-CBC-SHA256 \
TLS-ECDH-ECDSA-WITH-AES-256-CBC-SHA384 \
TLS-ECDH-ECDSA-WITH-AES-128-GCM-SHA256 \
TLS-ECDH-ECDSA-WITH-AES-256-GCM-SHA384 \
TLS-ECDHE-ECDSA-WITH-ARIA-256-GCM-SHA384 \
TLS-ECDHE-ECDSA-WITH-ARIA-128-GCM-SHA256 \
TLS-ECDHE-ECDSA-WITH-CHACHA20-POLY1305-SHA256 \
"
O_CIPHERS="$O_CIPHERS \
ECDH-ECDSA-AES128-SHA256 \
ECDH-ECDSA-AES256-SHA384 \
ECDH-ECDSA-AES128-GCM-SHA256 \
ECDH-ECDSA-AES256-GCM-SHA384 \
ECDHE-ECDSA-ARIA256-GCM-SHA384 \
ECDHE-ECDSA-ARIA128-GCM-SHA256 \
ECDHE-ECDSA-CHACHA20-POLY1305 \
"
fi
;;
"RSA")
M_CIPHERS="$M_CIPHERS \
TLS-RSA-WITH-DES-CBC-SHA \
TLS-DHE-RSA-WITH-DES-CBC-SHA \
"
O_CIPHERS="$O_CIPHERS \
DES-CBC-SHA \
EDH-RSA-DES-CBC-SHA \
"
if [ `minor_ver "$MODE"` -ge 3 ]
then
M_CIPHERS="$M_CIPHERS \
TLS-ECDHE-RSA-WITH-ARIA-256-GCM-SHA384 \
TLS-DHE-RSA-WITH-ARIA-256-GCM-SHA384 \
TLS-RSA-WITH-ARIA-256-GCM-SHA384 \
TLS-ECDHE-RSA-WITH-ARIA-128-GCM-SHA256 \
TLS-DHE-RSA-WITH-ARIA-128-GCM-SHA256 \
TLS-RSA-WITH-ARIA-128-GCM-SHA256 \
TLS-DHE-RSA-WITH-CHACHA20-POLY1305-SHA256 \
TLS-ECDHE-RSA-WITH-CHACHA20-POLY1305-SHA256 \
"
O_CIPHERS="$O_CIPHERS \
ECDHE-ARIA256-GCM-SHA384 \
DHE-RSA-ARIA256-GCM-SHA384 \
ARIA256-GCM-SHA384 \
ECDHE-ARIA128-GCM-SHA256 \
DHE-RSA-ARIA128-GCM-SHA256 \
ARIA128-GCM-SHA256 \
DHE-RSA-CHACHA20-POLY1305 \
ECDHE-RSA-CHACHA20-POLY1305 \
"
fi
;;
"PSK")
if [ `minor_ver "$MODE"` -ge 3 ]
then
M_CIPHERS="$M_CIPHERS \
TLS-DHE-PSK-WITH-ARIA-256-GCM-SHA384 \
TLS-DHE-PSK-WITH-ARIA-128-GCM-SHA256 \
TLS-PSK-WITH-ARIA-256-GCM-SHA384 \
TLS-PSK-WITH-ARIA-128-GCM-SHA256 \
TLS-PSK-WITH-CHACHA20-POLY1305-SHA256 \
TLS-ECDHE-PSK-WITH-CHACHA20-POLY1305-SHA256 \
TLS-DHE-PSK-WITH-CHACHA20-POLY1305-SHA256 \
"
O_CIPHERS="$O_CIPHERS \
DHE-PSK-ARIA256-GCM-SHA384 \
DHE-PSK-ARIA128-GCM-SHA256 \
PSK-ARIA256-GCM-SHA384 \
PSK-ARIA128-GCM-SHA256 \
DHE-PSK-CHACHA20-POLY1305 \
ECDHE-PSK-CHACHA20-POLY1305 \
PSK-CHACHA20-POLY1305 \
"
fi
;;
esac
}
# Ciphersuites usable only with Mbed TLS and GnuTLS
# Each ciphersuite should appear two times, once with its GnuTLS name, once
# with its Mbed TLS name.
add_gnutls_ciphersuites()
{
case $TYPE in
"ECDSA")
if [ `minor_ver "$MODE"` -ge 3 ]
then
M_CIPHERS="$M_CIPHERS \
TLS-ECDHE-ECDSA-WITH-CAMELLIA-128-CBC-SHA256 \
TLS-ECDHE-ECDSA-WITH-CAMELLIA-256-CBC-SHA384 \
TLS-ECDHE-ECDSA-WITH-CAMELLIA-128-GCM-SHA256 \
TLS-ECDHE-ECDSA-WITH-CAMELLIA-256-GCM-SHA384 \
TLS-ECDHE-ECDSA-WITH-AES-128-CCM \
TLS-ECDHE-ECDSA-WITH-AES-256-CCM \
TLS-ECDHE-ECDSA-WITH-AES-128-CCM-8 \
TLS-ECDHE-ECDSA-WITH-AES-256-CCM-8 \
"
G_CIPHERS="$G_CIPHERS \
+ECDHE-ECDSA:+CAMELLIA-128-CBC:+SHA256 \
+ECDHE-ECDSA:+CAMELLIA-256-CBC:+SHA384 \
+ECDHE-ECDSA:+CAMELLIA-128-GCM:+AEAD \
+ECDHE-ECDSA:+CAMELLIA-256-GCM:+AEAD \
+ECDHE-ECDSA:+AES-128-CCM:+AEAD \
+ECDHE-ECDSA:+AES-256-CCM:+AEAD \
+ECDHE-ECDSA:+AES-128-CCM-8:+AEAD \
+ECDHE-ECDSA:+AES-256-CCM-8:+AEAD \
"
fi
;;
"RSA")
if [ `minor_ver "$MODE"` -gt 0 ]
then
M_CIPHERS="$M_CIPHERS \
TLS-RSA-WITH-NULL-SHA256 \
"
G_CIPHERS="$G_CIPHERS \
+RSA:+NULL:+SHA256 \
"
fi
if [ `minor_ver "$MODE"` -ge 3 ]
then
M_CIPHERS="$M_CIPHERS \
TLS-ECDHE-RSA-WITH-CAMELLIA-128-CBC-SHA256 \
TLS-ECDHE-RSA-WITH-CAMELLIA-256-CBC-SHA384 \
TLS-RSA-WITH-CAMELLIA-128-CBC-SHA256 \
TLS-RSA-WITH-CAMELLIA-256-CBC-SHA256 \
TLS-DHE-RSA-WITH-CAMELLIA-128-CBC-SHA256 \
TLS-DHE-RSA-WITH-CAMELLIA-256-CBC-SHA256 \
TLS-ECDHE-RSA-WITH-CAMELLIA-128-GCM-SHA256 \
TLS-ECDHE-RSA-WITH-CAMELLIA-256-GCM-SHA384 \
TLS-DHE-RSA-WITH-CAMELLIA-128-GCM-SHA256 \
TLS-DHE-RSA-WITH-CAMELLIA-256-GCM-SHA384 \
TLS-RSA-WITH-CAMELLIA-128-GCM-SHA256 \
TLS-RSA-WITH-CAMELLIA-256-GCM-SHA384 \
TLS-RSA-WITH-AES-128-CCM \
TLS-RSA-WITH-AES-256-CCM \
TLS-DHE-RSA-WITH-AES-128-CCM \
TLS-DHE-RSA-WITH-AES-256-CCM \
TLS-RSA-WITH-AES-128-CCM-8 \
TLS-RSA-WITH-AES-256-CCM-8 \
TLS-DHE-RSA-WITH-AES-128-CCM-8 \
TLS-DHE-RSA-WITH-AES-256-CCM-8 \
"
G_CIPHERS="$G_CIPHERS \
+ECDHE-RSA:+CAMELLIA-128-CBC:+SHA256 \
+ECDHE-RSA:+CAMELLIA-256-CBC:+SHA384 \
+RSA:+CAMELLIA-128-CBC:+SHA256 \
+RSA:+CAMELLIA-256-CBC:+SHA256 \
+DHE-RSA:+CAMELLIA-128-CBC:+SHA256 \
+DHE-RSA:+CAMELLIA-256-CBC:+SHA256 \
+ECDHE-RSA:+CAMELLIA-128-GCM:+AEAD \
+ECDHE-RSA:+CAMELLIA-256-GCM:+AEAD \
+DHE-RSA:+CAMELLIA-128-GCM:+AEAD \
+DHE-RSA:+CAMELLIA-256-GCM:+AEAD \
+RSA:+CAMELLIA-128-GCM:+AEAD \
+RSA:+CAMELLIA-256-GCM:+AEAD \
+RSA:+AES-128-CCM:+AEAD \
+RSA:+AES-256-CCM:+AEAD \
+RSA:+AES-128-CCM-8:+AEAD \
+RSA:+AES-256-CCM-8:+AEAD \
+DHE-RSA:+AES-128-CCM:+AEAD \
+DHE-RSA:+AES-256-CCM:+AEAD \
+DHE-RSA:+AES-128-CCM-8:+AEAD \
+DHE-RSA:+AES-256-CCM-8:+AEAD \
"
fi
;;
"PSK")
M_CIPHERS="$M_CIPHERS \
TLS-DHE-PSK-WITH-3DES-EDE-CBC-SHA \
TLS-DHE-PSK-WITH-AES-128-CBC-SHA \
TLS-DHE-PSK-WITH-AES-256-CBC-SHA \
TLS-DHE-PSK-WITH-RC4-128-SHA \
"
G_CIPHERS="$G_CIPHERS \
+DHE-PSK:+3DES-CBC:+SHA1 \
+DHE-PSK:+AES-128-CBC:+SHA1 \
+DHE-PSK:+AES-256-CBC:+SHA1 \
+DHE-PSK:+ARCFOUR-128:+SHA1 \
"
if [ `minor_ver "$MODE"` -gt 0 ]
then
M_CIPHERS="$M_CIPHERS \
TLS-ECDHE-PSK-WITH-AES-256-CBC-SHA \
TLS-ECDHE-PSK-WITH-AES-128-CBC-SHA \
TLS-ECDHE-PSK-WITH-3DES-EDE-CBC-SHA \
TLS-ECDHE-PSK-WITH-RC4-128-SHA \
TLS-RSA-PSK-WITH-3DES-EDE-CBC-SHA \
TLS-RSA-PSK-WITH-AES-256-CBC-SHA \
TLS-RSA-PSK-WITH-AES-128-CBC-SHA \
TLS-RSA-PSK-WITH-RC4-128-SHA \
"
G_CIPHERS="$G_CIPHERS \
+ECDHE-PSK:+3DES-CBC:+SHA1 \
+ECDHE-PSK:+AES-128-CBC:+SHA1 \
+ECDHE-PSK:+AES-256-CBC:+SHA1 \
+ECDHE-PSK:+ARCFOUR-128:+SHA1 \
+RSA-PSK:+3DES-CBC:+SHA1 \
+RSA-PSK:+AES-256-CBC:+SHA1 \
+RSA-PSK:+AES-128-CBC:+SHA1 \
+RSA-PSK:+ARCFOUR-128:+SHA1 \
"
fi
if [ `minor_ver "$MODE"` -ge 3 ]
then
M_CIPHERS="$M_CIPHERS \
TLS-ECDHE-PSK-WITH-AES-256-CBC-SHA384 \
TLS-ECDHE-PSK-WITH-CAMELLIA-256-CBC-SHA384 \
TLS-ECDHE-PSK-WITH-AES-128-CBC-SHA256 \
TLS-ECDHE-PSK-WITH-CAMELLIA-128-CBC-SHA256 \
TLS-ECDHE-PSK-WITH-NULL-SHA384 \
TLS-ECDHE-PSK-WITH-NULL-SHA256 \
TLS-PSK-WITH-AES-128-CBC-SHA256 \
TLS-PSK-WITH-AES-256-CBC-SHA384 \
TLS-DHE-PSK-WITH-AES-128-CBC-SHA256 \
TLS-DHE-PSK-WITH-AES-256-CBC-SHA384 \
TLS-PSK-WITH-NULL-SHA256 \
TLS-PSK-WITH-NULL-SHA384 \
TLS-DHE-PSK-WITH-NULL-SHA256 \
TLS-DHE-PSK-WITH-NULL-SHA384 \
TLS-RSA-PSK-WITH-AES-256-CBC-SHA384 \
TLS-RSA-PSK-WITH-AES-128-CBC-SHA256 \
TLS-RSA-PSK-WITH-NULL-SHA256 \
TLS-RSA-PSK-WITH-NULL-SHA384 \
TLS-DHE-PSK-WITH-CAMELLIA-128-CBC-SHA256 \
TLS-DHE-PSK-WITH-CAMELLIA-256-CBC-SHA384 \
TLS-PSK-WITH-CAMELLIA-128-CBC-SHA256 \
TLS-PSK-WITH-CAMELLIA-256-CBC-SHA384 \
TLS-RSA-PSK-WITH-CAMELLIA-256-CBC-SHA384 \
TLS-RSA-PSK-WITH-CAMELLIA-128-CBC-SHA256 \
TLS-PSK-WITH-AES-128-GCM-SHA256 \
TLS-PSK-WITH-AES-256-GCM-SHA384 \
TLS-DHE-PSK-WITH-AES-128-GCM-SHA256 \
TLS-DHE-PSK-WITH-AES-256-GCM-SHA384 \
TLS-PSK-WITH-AES-128-CCM \
TLS-PSK-WITH-AES-256-CCM \
TLS-DHE-PSK-WITH-AES-128-CCM \
TLS-DHE-PSK-WITH-AES-256-CCM \
TLS-PSK-WITH-AES-128-CCM-8 \
TLS-PSK-WITH-AES-256-CCM-8 \
TLS-DHE-PSK-WITH-AES-128-CCM-8 \
TLS-DHE-PSK-WITH-AES-256-CCM-8 \
TLS-RSA-PSK-WITH-CAMELLIA-128-GCM-SHA256 \
TLS-RSA-PSK-WITH-CAMELLIA-256-GCM-SHA384 \
TLS-PSK-WITH-CAMELLIA-128-GCM-SHA256 \
TLS-PSK-WITH-CAMELLIA-256-GCM-SHA384 \
TLS-DHE-PSK-WITH-CAMELLIA-128-GCM-SHA256 \
TLS-DHE-PSK-WITH-CAMELLIA-256-GCM-SHA384 \
TLS-RSA-PSK-WITH-AES-256-GCM-SHA384 \
TLS-RSA-PSK-WITH-AES-128-GCM-SHA256 \
"
G_CIPHERS="$G_CIPHERS \
+ECDHE-PSK:+AES-256-CBC:+SHA384 \
+ECDHE-PSK:+CAMELLIA-256-CBC:+SHA384 \
+ECDHE-PSK:+AES-128-CBC:+SHA256 \
+ECDHE-PSK:+CAMELLIA-128-CBC:+SHA256 \
+PSK:+AES-128-CBC:+SHA256 \
+PSK:+AES-256-CBC:+SHA384 \
+DHE-PSK:+AES-128-CBC:+SHA256 \
+DHE-PSK:+AES-256-CBC:+SHA384 \
+RSA-PSK:+AES-256-CBC:+SHA384 \
+RSA-PSK:+AES-128-CBC:+SHA256 \
+DHE-PSK:+CAMELLIA-128-CBC:+SHA256 \
+DHE-PSK:+CAMELLIA-256-CBC:+SHA384 \
+PSK:+CAMELLIA-128-CBC:+SHA256 \
+PSK:+CAMELLIA-256-CBC:+SHA384 \
+RSA-PSK:+CAMELLIA-256-CBC:+SHA384 \
+RSA-PSK:+CAMELLIA-128-CBC:+SHA256 \
+PSK:+AES-128-GCM:+AEAD \
+PSK:+AES-256-GCM:+AEAD \
+DHE-PSK:+AES-128-GCM:+AEAD \
+DHE-PSK:+AES-256-GCM:+AEAD \
+PSK:+AES-128-CCM:+AEAD \
+PSK:+AES-256-CCM:+AEAD \
+DHE-PSK:+AES-128-CCM:+AEAD \
+DHE-PSK:+AES-256-CCM:+AEAD \
+PSK:+AES-128-CCM-8:+AEAD \
+PSK:+AES-256-CCM-8:+AEAD \
+DHE-PSK:+AES-128-CCM-8:+AEAD \
+DHE-PSK:+AES-256-CCM-8:+AEAD \
+RSA-PSK:+CAMELLIA-128-GCM:+AEAD \
+RSA-PSK:+CAMELLIA-256-GCM:+AEAD \
+PSK:+CAMELLIA-128-GCM:+AEAD \
+PSK:+CAMELLIA-256-GCM:+AEAD \
+DHE-PSK:+CAMELLIA-128-GCM:+AEAD \
+DHE-PSK:+CAMELLIA-256-GCM:+AEAD \
+RSA-PSK:+AES-256-GCM:+AEAD \
+RSA-PSK:+AES-128-GCM:+AEAD \
+ECDHE-PSK:+NULL:+SHA384 \
+ECDHE-PSK:+NULL:+SHA256 \
+PSK:+NULL:+SHA256 \
+PSK:+NULL:+SHA384 \
+DHE-PSK:+NULL:+SHA256 \
+DHE-PSK:+NULL:+SHA384 \
+RSA-PSK:+NULL:+SHA256 \
+RSA-PSK:+NULL:+SHA384 \
"
fi
;;
esac
}
# Ciphersuites usable only with Mbed TLS (not currently supported by another
# peer usable in this script). This provide only very rudimentaty testing, as
# this is not interop testing, but it's better than nothing.
add_mbedtls_ciphersuites()
{
case $TYPE in
"ECDSA")
if [ `minor_ver "$MODE"` -gt 0 ]
then
M_CIPHERS="$M_CIPHERS \
TLS-ECDH-ECDSA-WITH-CAMELLIA-128-CBC-SHA256 \
TLS-ECDH-ECDSA-WITH-CAMELLIA-256-CBC-SHA384 \
"
fi
if [ `minor_ver "$MODE"` -ge 3 ]
then
M_CIPHERS="$M_CIPHERS \
TLS-ECDH-ECDSA-WITH-CAMELLIA-128-GCM-SHA256 \
TLS-ECDH-ECDSA-WITH-CAMELLIA-256-GCM-SHA384 \
TLS-ECDHE-ECDSA-WITH-ARIA-256-CBC-SHA384 \
TLS-ECDHE-ECDSA-WITH-ARIA-128-CBC-SHA256 \
TLS-ECDH-ECDSA-WITH-ARIA-256-GCM-SHA384 \
TLS-ECDH-ECDSA-WITH-ARIA-128-GCM-SHA256 \
TLS-ECDH-ECDSA-WITH-ARIA-256-CBC-SHA384 \
TLS-ECDH-ECDSA-WITH-ARIA-128-CBC-SHA256 \
"
fi
;;
"RSA")
if [ `minor_ver "$MODE"` -ge 3 ]
then
M_CIPHERS="$M_CIPHERS \
TLS-ECDHE-RSA-WITH-ARIA-256-CBC-SHA384 \
TLS-DHE-RSA-WITH-ARIA-256-CBC-SHA384 \
TLS-ECDHE-RSA-WITH-ARIA-128-CBC-SHA256 \
TLS-DHE-RSA-WITH-ARIA-128-CBC-SHA256 \
TLS-RSA-WITH-ARIA-256-CBC-SHA384 \
TLS-RSA-WITH-ARIA-128-CBC-SHA256 \
"
fi
;;
"PSK")
# *PSK-NULL-SHA suites supported by GnuTLS 3.3.5 but not 3.2.15
M_CIPHERS="$M_CIPHERS \
TLS-PSK-WITH-NULL-SHA \
TLS-DHE-PSK-WITH-NULL-SHA \
"
if [ `minor_ver "$MODE"` -gt 0 ]
then
M_CIPHERS="$M_CIPHERS \
TLS-ECDHE-PSK-WITH-NULL-SHA \
TLS-RSA-PSK-WITH-NULL-SHA \
"
fi
if [ `minor_ver "$MODE"` -ge 3 ]
then
M_CIPHERS="$M_CIPHERS \
TLS-RSA-PSK-WITH-ARIA-256-CBC-SHA384 \
TLS-RSA-PSK-WITH-ARIA-128-CBC-SHA256 \
TLS-PSK-WITH-ARIA-256-CBC-SHA384 \
TLS-PSK-WITH-ARIA-128-CBC-SHA256 \
TLS-RSA-PSK-WITH-ARIA-256-GCM-SHA384 \
TLS-RSA-PSK-WITH-ARIA-128-GCM-SHA256 \
TLS-ECDHE-PSK-WITH-ARIA-256-CBC-SHA384 \
TLS-ECDHE-PSK-WITH-ARIA-128-CBC-SHA256 \
TLS-DHE-PSK-WITH-ARIA-256-CBC-SHA384 \
TLS-DHE-PSK-WITH-ARIA-128-CBC-SHA256 \
TLS-RSA-PSK-WITH-CHACHA20-POLY1305-SHA256 \
"
fi
;;
esac
}
setup_arguments()
{
G_MODE=""
case "$MODE" in
"ssl3")
G_PRIO_MODE="+VERS-SSL3.0"
;;
"tls1")
G_PRIO_MODE="+VERS-TLS1.0"
;;
"tls1_1")
G_PRIO_MODE="+VERS-TLS1.1"
;;
"tls1_2")
G_PRIO_MODE="+VERS-TLS1.2"
;;
"dtls1")
G_PRIO_MODE="+VERS-DTLS1.0"
G_MODE="-u"
;;
"dtls1_2")
G_PRIO_MODE="+VERS-DTLS1.2"
G_MODE="-u"
;;
*)
echo "error: invalid mode: $MODE" >&2
exit 1;
esac
# GnuTLS < 3.4 will choke if we try to allow CCM-8
if [ -z "${GNUTLS_MINOR_LT_FOUR-}" ]; then
G_PRIO_CCM="+AES-256-CCM-8:+AES-128-CCM-8:"
else
G_PRIO_CCM=""
fi
M_SERVER_ARGS="server_port=$PORT server_addr=0.0.0.0 force_version=$MODE arc4=1"
O_SERVER_ARGS="-accept $PORT -cipher NULL,ALL -$MODE -dhparam data_files/dhparams.pem"
G_SERVER_ARGS="-p $PORT --http $G_MODE"
G_SERVER_PRIO="NORMAL:${G_PRIO_CCM}+ARCFOUR-128:+NULL:+MD5:+PSK:+DHE-PSK:+ECDHE-PSK:+RSA-PSK:-VERS-TLS-ALL:$G_PRIO_MODE"
# with OpenSSL 1.0.1h, -www, -WWW and -HTTP break DTLS handshakes
if is_dtls "$MODE"; then
O_SERVER_ARGS="$O_SERVER_ARGS"
else
O_SERVER_ARGS="$O_SERVER_ARGS -www"
fi
M_CLIENT_ARGS="server_port=$PORT server_addr=127.0.0.1 force_version=$MODE"
O_CLIENT_ARGS="-connect localhost:$PORT -$MODE"
G_CLIENT_ARGS="-p $PORT --debug 3 $G_MODE"
G_CLIENT_PRIO="NONE:$G_PRIO_MODE:+COMP-NULL:+CURVE-ALL:+SIGN-ALL"
if [ "X$VERIFY" = "XYES" ];
then
M_SERVER_ARGS="$M_SERVER_ARGS ca_file=data_files/test-ca_cat12.crt auth_mode=required"
O_SERVER_ARGS="$O_SERVER_ARGS -CAfile data_files/test-ca_cat12.crt -Verify 10"
G_SERVER_ARGS="$G_SERVER_ARGS --x509cafile data_files/test-ca_cat12.crt --require-client-cert"
M_CLIENT_ARGS="$M_CLIENT_ARGS ca_file=data_files/test-ca_cat12.crt auth_mode=required"
O_CLIENT_ARGS="$O_CLIENT_ARGS -CAfile data_files/test-ca_cat12.crt -verify 10"
G_CLIENT_ARGS="$G_CLIENT_ARGS --x509cafile data_files/test-ca_cat12.crt"
else
# don't request a client cert at all
M_SERVER_ARGS="$M_SERVER_ARGS ca_file=none auth_mode=none"
G_SERVER_ARGS="$G_SERVER_ARGS --disable-client-cert"
M_CLIENT_ARGS="$M_CLIENT_ARGS ca_file=none auth_mode=none"
O_CLIENT_ARGS="$O_CLIENT_ARGS"
G_CLIENT_ARGS="$G_CLIENT_ARGS --insecure"
fi
case $TYPE in
"ECDSA")
M_SERVER_ARGS="$M_SERVER_ARGS crt_file=data_files/server5.crt key_file=data_files/server5.key"
O_SERVER_ARGS="$O_SERVER_ARGS -cert data_files/server5.crt -key data_files/server5.key"
G_SERVER_ARGS="$G_SERVER_ARGS --x509certfile data_files/server5.crt --x509keyfile data_files/server5.key"
if [ "X$VERIFY" = "XYES" ]; then
M_CLIENT_ARGS="$M_CLIENT_ARGS crt_file=data_files/server6.crt key_file=data_files/server6.key"
O_CLIENT_ARGS="$O_CLIENT_ARGS -cert data_files/server6.crt -key data_files/server6.key"
G_CLIENT_ARGS="$G_CLIENT_ARGS --x509certfile data_files/server6.crt --x509keyfile data_files/server6.key"
else
M_CLIENT_ARGS="$M_CLIENT_ARGS crt_file=none key_file=none"
fi
;;
"RSA")
M_SERVER_ARGS="$M_SERVER_ARGS crt_file=data_files/server2.crt key_file=data_files/server2.key"
O_SERVER_ARGS="$O_SERVER_ARGS -cert data_files/server2.crt -key data_files/server2.key"
G_SERVER_ARGS="$G_SERVER_ARGS --x509certfile data_files/server2.crt --x509keyfile data_files/server2.key"
if [ "X$VERIFY" = "XYES" ]; then
M_CLIENT_ARGS="$M_CLIENT_ARGS crt_file=data_files/server1.crt key_file=data_files/server1.key"
O_CLIENT_ARGS="$O_CLIENT_ARGS -cert data_files/server1.crt -key data_files/server1.key"
G_CLIENT_ARGS="$G_CLIENT_ARGS --x509certfile data_files/server1.crt --x509keyfile data_files/server1.key"
else
M_CLIENT_ARGS="$M_CLIENT_ARGS crt_file=none key_file=none"
fi
# Allow SHA-1. It's disabled by default for security reasons but
# our tests still use certificates signed with it.
M_SERVER_ARGS="$M_SERVER_ARGS allow_sha1=1"
M_CLIENT_ARGS="$M_CLIENT_ARGS allow_sha1=1"
;;
"PSK")
# give RSA-PSK-capable server a RSA cert
# (should be a separate type, but harder to close with openssl)
M_SERVER_ARGS="$M_SERVER_ARGS psk=6162636465666768696a6b6c6d6e6f70 ca_file=none crt_file=data_files/server2.crt key_file=data_files/server2.key"
O_SERVER_ARGS="$O_SERVER_ARGS -psk 6162636465666768696a6b6c6d6e6f70 -nocert"
G_SERVER_ARGS="$G_SERVER_ARGS --x509certfile data_files/server2.crt --x509keyfile data_files/server2.key --pskpasswd data_files/passwd.psk"
M_CLIENT_ARGS="$M_CLIENT_ARGS psk=6162636465666768696a6b6c6d6e6f70 crt_file=none key_file=none"
O_CLIENT_ARGS="$O_CLIENT_ARGS -psk 6162636465666768696a6b6c6d6e6f70"
G_CLIENT_ARGS="$G_CLIENT_ARGS --pskusername Client_identity --pskkey=6162636465666768696a6b6c6d6e6f70"
# Allow SHA-1. It's disabled by default for security reasons but
# our tests still use certificates signed with it.
M_SERVER_ARGS="$M_SERVER_ARGS allow_sha1=1"
M_CLIENT_ARGS="$M_CLIENT_ARGS allow_sha1=1"
;;
esac
}
# is_mbedtls <cmd_line>
is_mbedtls() {
echo "$1" | grep 'ssl_server2\|ssl_client2' > /dev/null
}
# has_mem_err <log_file_name>
has_mem_err() {
if ( grep -F 'All heap blocks were freed -- no leaks are possible' "$1" &&
grep -F 'ERROR SUMMARY: 0 errors from 0 contexts' "$1" ) > /dev/null
then
return 1 # false: does not have errors
else
return 0 # true: has errors
fi
}
# Wait for process $2 to be listening on port $1
if type lsof >/dev/null 2>/dev/null; then
wait_server_start() {
START_TIME=$(date +%s)
if is_dtls "$MODE"; then
proto=UDP
else
proto=TCP
fi
while ! lsof -a -n -b -i "$proto:$1" -p "$2" >/dev/null 2>/dev/null; do
if [ $(( $(date +%s) - $START_TIME )) -gt $DOG_DELAY ]; then
echo "SERVERSTART TIMEOUT"
echo "SERVERSTART TIMEOUT" >> $SRV_OUT
break
fi
# Linux and *BSD support decimal arguments to sleep. On other
# OSes this may be a tight loop.
sleep 0.1 2>/dev/null || true
done
}
else
echo "Warning: lsof not available, wait_server_start = sleep"
wait_server_start() {
sleep 2
}
fi
# start_server <name>
# also saves name and command
start_server() {
case $1 in
[Oo]pen*)
SERVER_CMD="$OPENSSL_CMD s_server $O_SERVER_ARGS"
;;
[Gg]nu*)
SERVER_CMD="$GNUTLS_SERV $G_SERVER_ARGS --priority $G_SERVER_PRIO"
;;
mbed*)
SERVER_CMD="$M_SRV $M_SERVER_ARGS"
if [ "$MEMCHECK" -gt 0 ]; then
SERVER_CMD="valgrind --leak-check=full $SERVER_CMD"
fi
;;
*)
echo "error: invalid server name: $1" >&2
exit 1
;;
esac
SERVER_NAME=$1
log "$SERVER_CMD"
echo "$SERVER_CMD" > $SRV_OUT
# for servers without -www or equivalent
while :; do echo bla; sleep 1; done | $SERVER_CMD >> $SRV_OUT 2>&1 &
PROCESS_ID=$!
wait_server_start "$PORT" "$PROCESS_ID"
}
# terminate the running server
stop_server() {
kill $PROCESS_ID 2>/dev/null
wait $PROCESS_ID 2>/dev/null
if [ "$MEMCHECK" -gt 0 ]; then
if is_mbedtls "$SERVER_CMD" && has_mem_err $SRV_OUT; then
echo " ! Server had memory errors"
SRVMEM=$(( $SRVMEM + 1 ))
return
fi
fi
rm -f $SRV_OUT
}
# kill the running server (used when killed by signal)
cleanup() {
rm -f $SRV_OUT $CLI_OUT
kill $PROCESS_ID >/dev/null 2>&1
kill $WATCHDOG_PID >/dev/null 2>&1
exit 1
}
# wait for client to terminate and set EXIT
# must be called right after starting the client
wait_client_done() {
CLI_PID=$!
( sleep "$DOG_DELAY"; echo "TIMEOUT" >> $CLI_OUT; kill $CLI_PID ) &
WATCHDOG_PID=$!
wait $CLI_PID
EXIT=$?
kill $WATCHDOG_PID
wait $WATCHDOG_PID
echo "EXIT: $EXIT" >> $CLI_OUT
}
# run_client <name> <cipher>
run_client() {
# announce what we're going to do
TESTS=$(( $TESTS + 1 ))
VERIF=$(echo $VERIFY | tr '[:upper:]' '[:lower:]')
TITLE="`echo $1 | head -c1`->`echo $SERVER_NAME | head -c1`"
TITLE="$TITLE $MODE,$VERIF $2"
printf "$TITLE "
LEN=$(( 72 - `echo "$TITLE" | wc -c` ))
for i in `seq 1 $LEN`; do printf '.'; done; printf ' '
# should we skip?
if [ "X$SKIP_NEXT" = "XYES" ]; then
SKIP_NEXT="NO"
echo "SKIP"
SKIPPED=$(( $SKIPPED + 1 ))
return
fi
# run the command and interpret result
case $1 in
[Oo]pen*)
CLIENT_CMD="$OPENSSL_CMD s_client $O_CLIENT_ARGS -cipher $2"
log "$CLIENT_CMD"
echo "$CLIENT_CMD" > $CLI_OUT
printf 'GET HTTP/1.0\r\n\r\n' | $CLIENT_CMD >> $CLI_OUT 2>&1 &
wait_client_done
if [ $EXIT -eq 0 ]; then
RESULT=0
else
# If the cipher isn't supported...
if grep 'Cipher is (NONE)' $CLI_OUT >/dev/null; then
RESULT=1
else
RESULT=2
fi
fi
;;
[Gg]nu*)
# need to force IPv4 with UDP, but keep localhost for auth
if is_dtls "$MODE"; then
G_HOST="127.0.0.1"
else
G_HOST="localhost"
fi
CLIENT_CMD="$GNUTLS_CLI $G_CLIENT_ARGS --priority $G_PRIO_MODE:$2 $G_HOST"
log "$CLIENT_CMD"
echo "$CLIENT_CMD" > $CLI_OUT
printf 'GET HTTP/1.0\r\n\r\n' | $CLIENT_CMD >> $CLI_OUT 2>&1 &
wait_client_done
if [ $EXIT -eq 0 ]; then
RESULT=0
else
RESULT=2
# interpret early failure, with a handshake_failure alert
# before the server hello, as "no ciphersuite in common"
if grep -F 'Received alert [40]: Handshake failed' $CLI_OUT; then
if grep -i 'SERVER HELLO .* was received' $CLI_OUT; then :
else
RESULT=1
fi
fi >/dev/null
fi
;;
mbed*)
CLIENT_CMD="$M_CLI $M_CLIENT_ARGS force_ciphersuite=$2"
if [ "$MEMCHECK" -gt 0 ]; then
CLIENT_CMD="valgrind --leak-check=full $CLIENT_CMD"
fi
log "$CLIENT_CMD"
echo "$CLIENT_CMD" > $CLI_OUT
$CLIENT_CMD >> $CLI_OUT 2>&1 &
wait_client_done
case $EXIT in
# Success
"0") RESULT=0 ;;
# Ciphersuite not supported
"2") RESULT=1 ;;
# Error
*) RESULT=2 ;;
esac
if [ "$MEMCHECK" -gt 0 ]; then
if is_mbedtls "$CLIENT_CMD" && has_mem_err $CLI_OUT; then
RESULT=2
fi
fi
;;
*)
echo "error: invalid client name: $1" >&2
exit 1
;;
esac
echo "EXIT: $EXIT" >> $CLI_OUT
# report and count result
case $RESULT in
"0")
echo PASS
;;
"1")
echo SKIP
SKIPPED=$(( $SKIPPED + 1 ))
;;
"2")
echo FAIL
cp $SRV_OUT c-srv-${TESTS}.log
cp $CLI_OUT c-cli-${TESTS}.log
echo " ! outputs saved to c-srv-${TESTS}.log, c-cli-${TESTS}.log"
if [ "X${USER:-}" = Xbuildbot -o "X${LOGNAME:-}" = Xbuildbot -o "${LOG_FAILURE_ON_STDOUT:-0}" != 0 ]; then
echo " ! server output:"
cat c-srv-${TESTS}.log
echo " ! ==================================================="
echo " ! client output:"
cat c-cli-${TESTS}.log
fi
FAILED=$(( $FAILED + 1 ))
;;
esac
rm -f $CLI_OUT
}
#
# MAIN
#
if cd $( dirname $0 ); then :; else
echo "cd $( dirname $0 ) failed" >&2
exit 1
fi
get_options "$@"
# sanity checks, avoid an avalanche of errors
if [ ! -x "$M_SRV" ]; then
echo "Command '$M_SRV' is not an executable file" >&2
exit 1
fi
if [ ! -x "$M_CLI" ]; then
echo "Command '$M_CLI' is not an executable file" >&2
exit 1
fi
if echo "$PEERS" | grep -i openssl > /dev/null; then
if which "$OPENSSL_CMD" >/dev/null 2>&1; then :; else
echo "Command '$OPENSSL_CMD' not found" >&2
exit 1
fi
fi
if echo "$PEERS" | grep -i gnutls > /dev/null; then
for CMD in "$GNUTLS_CLI" "$GNUTLS_SERV"; do
if which "$CMD" >/dev/null 2>&1; then :; else
echo "Command '$CMD' not found" >&2
exit 1
fi
done
fi
for PEER in $PEERS; do
case "$PEER" in
mbed*|[Oo]pen*|[Gg]nu*)
;;
*)
echo "Unknown peers: $PEER" >&2
exit 1
esac
done
# Pick a "unique" port in the range 10000-19999.
PORT="0000$$"
PORT="1$(echo $PORT | tail -c 5)"
# Also pick a unique name for intermediate files
SRV_OUT="srv_out.$$"
CLI_OUT="cli_out.$$"
# client timeout delay: be more patient with valgrind
if [ "$MEMCHECK" -gt 0 ]; then
DOG_DELAY=30
else
DOG_DELAY=10
fi
SKIP_NEXT="NO"
trap cleanup INT TERM HUP
for VERIFY in $VERIFIES; do
for MODE in $MODES; do
for TYPE in $TYPES; do
for PEER in $PEERS; do
setup_arguments
case "$PEER" in
[Oo]pen*)
if test "$OSSL_NO_DTLS" -gt 0 && is_dtls "$MODE"; then
continue;
fi
reset_ciphersuites
add_common_ciphersuites
add_openssl_ciphersuites
filter_ciphersuites
if [ "X" != "X$M_CIPHERS" ]; then
start_server "OpenSSL"
for i in $M_CIPHERS; do
check_openssl_server_bug $i
run_client mbedTLS $i
done
stop_server
fi
if [ "X" != "X$O_CIPHERS" ]; then
start_server "mbedTLS"
for i in $O_CIPHERS; do
run_client OpenSSL $i
done
stop_server
fi
;;
[Gg]nu*)
reset_ciphersuites
add_common_ciphersuites
add_gnutls_ciphersuites
filter_ciphersuites
if [ "X" != "X$M_CIPHERS" ]; then
start_server "GnuTLS"
for i in $M_CIPHERS; do
run_client mbedTLS $i
done
stop_server
fi
if [ "X" != "X$G_CIPHERS" ]; then
start_server "mbedTLS"
for i in $G_CIPHERS; do
run_client GnuTLS $i
done
stop_server
fi
;;
mbed*)
reset_ciphersuites
add_common_ciphersuites
add_openssl_ciphersuites
add_gnutls_ciphersuites
add_mbedtls_ciphersuites
filter_ciphersuites
if [ "X" != "X$M_CIPHERS" ]; then
start_server "mbedTLS"
for i in $M_CIPHERS; do
run_client mbedTLS $i
done
stop_server
fi
;;
*)
echo "Unknown peer: $PEER" >&2
exit 1
;;
esac
done
done
done
done
echo "------------------------------------------------------------------------"
if [ $FAILED -ne 0 -o $SRVMEM -ne 0 ];
then
printf "FAILED"
else
printf "PASSED"
fi
if [ "$MEMCHECK" -gt 0 ]; then
MEMREPORT=", $SRVMEM server memory errors"
else
MEMREPORT=""
fi
PASSED=$(( $TESTS - $FAILED ))
echo " ($PASSED / $TESTS tests ($SKIPPED skipped$MEMREPORT))"
FAILED=$(( $FAILED + $SRVMEM ))
exit $FAILED
Reference in New Issue View Git Blame Copy Permalink