AuroraMiddleware/mbedtls
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
47943aee91
mbedtls/tests/ssl-opt.sh
Manuel Pégourié-Gonnard 4b7027a8da Avoid race condition in test 
Apparently openssl s_server does not flush stdout, anyway sometimes the client
receives the reply and exits, thus terminating the test, before is request is
visible on the server's stdout. So, just don't check that, checking the
client's output and exit code is already enough.
2015-08-10 13:18:48 +02:00

3302 lines
128 KiB
Bash
Executable File
Raw Blame History

#!/bin/sh
# Test various options that are not covered by compat.sh
#
# Here the goal is not to cover every ciphersuite/version, but
# rather specific options (max fragment length, truncated hmac, etc)
# or procedures (session resumption from cache or ticket, renego, etc).
#
# Assumes a build with default options.
set -u
# default values, can be overriden by the environment
: ${P_SRV:=../programs/ssl/ssl_server2}
: ${P_CLI:=../programs/ssl/ssl_client2}
: ${P_PXY:=../programs/test/udp_proxy}
: ${OPENSSL_CMD:=openssl} # OPENSSL would conflict with the build system
: ${GNUTLS_CLI:=gnutls-cli}
: ${GNUTLS_SERV:=gnutls-serv}
O_SRV="$OPENSSL_CMD s_server -www -cert data_files/server5.crt -key data_files/server5.key"
O_CLI="echo 'GET / HTTP/1.0' | $OPENSSL_CMD s_client"
G_SRV="$GNUTLS_SERV --x509certfile data_files/server5.crt --x509keyfile data_files/server5.key"
G_CLI="echo 'GET / HTTP/1.0' | $GNUTLS_CLI --x509cafile data_files/test-ca_cat12.crt"
TESTS=0
FAILS=0
SKIPS=0
CONFIG_H='../include/mbedtls/config.h'
MEMCHECK=0
FILTER='.*'
EXCLUDE='^$'
print_usage() {
echo "Usage: $0 [options]"
printf " -h|--help\tPrint this help.\n"
printf " -m|--memcheck\tCheck memory leaks and errors.\n"
printf " -f|--filter\tOnly matching tests are executed (default: '$FILTER')\n"
printf " -e|--exclude\tMatching tests are excluded (default: '$EXCLUDE')\n"
}
get_options() {
while [ $# -gt 0 ]; do
case "$1" in
-f|--filter)
shift; FILTER=$1
;;
-e|--exclude)
shift; EXCLUDE=$1
;;
-m|--memcheck)
MEMCHECK=1
;;
-h|--help)
print_usage
exit 0
;;
*)
echo "Unknown argument: '$1'"
print_usage
exit 1
;;
esac
shift
done
}
# skip next test if the flag is not enabled in config.h
requires_config_enabled() {
if grep "^#define $1" $CONFIG_H > /dev/null; then :; else
SKIP_NEXT="YES"
fi
}
# skip next test if OpenSSL doesn't support FALLBACK_SCSV
requires_openssl_with_fallback_scsv() {
if [ -z "${OPENSSL_HAS_FBSCSV:-}" ]; then
if $OPENSSL_CMD s_client -help 2>&1 | grep fallback_scsv >/dev/null
then
OPENSSL_HAS_FBSCSV="YES"
else
OPENSSL_HAS_FBSCSV="NO"
fi
fi
if [ "$OPENSSL_HAS_FBSCSV" = "NO" ]; then
SKIP_NEXT="YES"
fi
}
# skip next test if GnuTLS isn't available
requires_gnutls() {
if [ -z "${GNUTLS_AVAILABLE:-}" ]; then
if ( which "$GNUTLS_CLI" && which "$GNUTLS_SERV" ) >/dev/null 2>&1; then
GNUTLS_AVAILABLE="YES"
else
GNUTLS_AVAILABLE="NO"
fi
fi
if [ "$GNUTLS_AVAILABLE" = "NO" ]; then
SKIP_NEXT="YES"
fi
}
# skip next test if IPv6 isn't available on this host
requires_ipv6() {
if [ -z "${HAS_IPV6:-}" ]; then
$P_SRV server_addr='::1' > $SRV_OUT 2>&1 &
SRV_PID=$!
sleep 1
kill $SRV_PID >/dev/null 2>&1
if grep "NET - Binding of the socket failed" $SRV_OUT >/dev/null; then
HAS_IPV6="NO"
else
HAS_IPV6="YES"
fi
rm -r $SRV_OUT
fi
if [ "$HAS_IPV6" = "NO" ]; then
SKIP_NEXT="YES"
fi
}
# skip the next test if valgrind is in use
not_with_valgrind() {
if [ "$MEMCHECK" -gt 0 ]; then
SKIP_NEXT="YES"
fi
}
# multiply the client timeout delay by the given factor for the next test
needs_more_time() {
CLI_DELAY_FACTOR=$1
}
# print_name <name>
print_name() {
printf "$1 "
LEN=$(( 72 - `echo "$1" | wc -c` ))
for i in `seq 1 $LEN`; do printf '.'; done
printf ' '
TESTS=$(( $TESTS + 1 ))
}
# fail <message>
fail() {
echo "FAIL"
echo " ! $1"
mv $SRV_OUT o-srv-${TESTS}.log
mv $CLI_OUT o-cli-${TESTS}.log
if [ -n "$PXY_CMD" ]; then
mv $PXY_OUT o-pxy-${TESTS}.log
fi
echo " ! outputs saved to o-XXX-${TESTS}.log"
if [ "X${USER:-}" = Xbuildbot -o "X${LOGNAME:-}" = Xbuildbot ]; then
echo " ! server output:"
cat o-srv-${TESTS}.log
echo " ! ========================================================"
echo " ! client output:"
cat o-cli-${TESTS}.log
if [ -n "$PXY_CMD" ]; then
echo " ! ========================================================"
echo " ! proxy output:"
cat o-pxy-${TESTS}.log
fi
echo ""
fi
FAILS=$(( $FAILS + 1 ))
}
# is_polar <cmd_line>
is_polar() {
echo "$1" | grep 'ssl_server2\|ssl_client2' > /dev/null
}
# openssl s_server doesn't have -www with DTLS
check_osrv_dtls() {
if echo "$SRV_CMD" | grep 's_server.*-dtls' >/dev/null; then
NEEDS_INPUT=1
SRV_CMD="$( echo $SRV_CMD | sed s/-www// )"
else
NEEDS_INPUT=0
fi
}
# provide input to commands that need it
provide_input() {
if [ $NEEDS_INPUT -eq 0 ]; then
return
fi
while true; do
echo "HTTP/1.0 200 OK"
sleep 1
done
}
# has_mem_err <log_file_name>
has_mem_err() {
if ( grep -F 'All heap blocks were freed -- no leaks are possible' "$1" &&
grep -F 'ERROR SUMMARY: 0 errors from 0 contexts' "$1" ) > /dev/null
then
return 1 # false: does not have errors
else
return 0 # true: has errors
fi
}
# wait for server to start: two versions depending on lsof availability
wait_server_start() {
if which lsof >/dev/null 2>&1; then
START_TIME=$( date +%s )
DONE=0
# make a tight loop, server usually takes less than 1 sec to start
if [ "$DTLS" -eq 1 ]; then
while [ $DONE -eq 0 ]; do
if lsof -nbi UDP:"$SRV_PORT" 2>/dev/null | grep UDP >/dev/null
then
DONE=1
elif [ $(( $( date +%s ) - $START_TIME )) -gt $DOG_DELAY ]; then
echo "SERVERSTART TIMEOUT"
echo "SERVERSTART TIMEOUT" >> $SRV_OUT
DONE=1
fi
done
else
while [ $DONE -eq 0 ]; do
if lsof -nbi TCP:"$SRV_PORT" 2>/dev/null | grep LISTEN >/dev/null
then
DONE=1
elif [ $(( $( date +%s ) - $START_TIME )) -gt $DOG_DELAY ]; then
echo "SERVERSTART TIMEOUT"
echo "SERVERSTART TIMEOUT" >> $SRV_OUT
DONE=1
fi
done
fi
else
sleep "$START_DELAY"
fi
}
# wait for client to terminate and set CLI_EXIT
# must be called right after starting the client
wait_client_done() {
CLI_PID=$!
CLI_DELAY=$(( $DOG_DELAY * $CLI_DELAY_FACTOR ))
CLI_DELAY_FACTOR=1
( sleep $CLI_DELAY; echo "===CLIENT_TIMEOUT===" >> $CLI_OUT; kill $CLI_PID ) &
DOG_PID=$!
wait $CLI_PID
CLI_EXIT=$?
kill $DOG_PID >/dev/null 2>&1
wait $DOG_PID
echo "EXIT: $CLI_EXIT" >> $CLI_OUT
}
# check if the given command uses dtls and sets global variable DTLS
detect_dtls() {
if echo "$1" | grep 'dtls=1\|-dtls1\|-u' >/dev/null; then
DTLS=1
else
DTLS=0
fi
}
# Usage: run_test name [-p proxy_cmd] srv_cmd cli_cmd cli_exit [option [...]]
# Options: -s pattern pattern that must be present in server output
# -c pattern pattern that must be present in client output
# -S pattern pattern that must be absent in server output
# -C pattern pattern that must be absent in client output
run_test() {
NAME="$1"
shift 1
if echo "$NAME" | grep "$FILTER" | grep -v "$EXCLUDE" >/dev/null; then :
else
SKIP_NEXT="NO"
return
fi
print_name "$NAME"
# should we skip?
if [ "X$SKIP_NEXT" = "XYES" ]; then
SKIP_NEXT="NO"
echo "SKIP"
SKIPS=$(( $SKIPS + 1 ))
return
fi
# does this test use a proxy?
if [ "X$1" = "X-p" ]; then
PXY_CMD="$2"
shift 2
else
PXY_CMD=""
fi
# get commands and client output
SRV_CMD="$1"
CLI_CMD="$2"
CLI_EXPECT="$3"
shift 3
# fix client port
if [ -n "$PXY_CMD" ]; then
CLI_CMD=$( echo "$CLI_CMD" | sed s/+SRV_PORT/$PXY_PORT/g )
else
CLI_CMD=$( echo "$CLI_CMD" | sed s/+SRV_PORT/$SRV_PORT/g )
fi
# update DTLS variable
detect_dtls "$SRV_CMD"
# prepend valgrind to our commands if active
if [ "$MEMCHECK" -gt 0 ]; then
if is_polar "$SRV_CMD"; then
SRV_CMD="valgrind --leak-check=full $SRV_CMD"
fi
if is_polar "$CLI_CMD"; then
CLI_CMD="valgrind --leak-check=full $CLI_CMD"
fi
fi
TIMES_LEFT=2
while [ $TIMES_LEFT -gt 0 ]; do
TIMES_LEFT=$(( $TIMES_LEFT - 1 ))
# run the commands
if [ -n "$PXY_CMD" ]; then
echo "$PXY_CMD" > $PXY_OUT
$PXY_CMD >> $PXY_OUT 2>&1 &
PXY_PID=$!
# assume proxy starts faster than server
fi
check_osrv_dtls
echo "$SRV_CMD" > $SRV_OUT
provide_input | $SRV_CMD >> $SRV_OUT 2>&1 &
SRV_PID=$!
wait_server_start
echo "$CLI_CMD" > $CLI_OUT
eval "$CLI_CMD" >> $CLI_OUT 2>&1 &
wait_client_done
# terminate the server (and the proxy)
kill $SRV_PID
wait $SRV_PID
if [ -n "$PXY_CMD" ]; then
kill $PXY_PID >/dev/null 2>&1
wait $PXY_PID
fi
# retry only on timeouts
if grep '===CLIENT_TIMEOUT===' $CLI_OUT >/dev/null; then
printf "RETRY "
else
TIMES_LEFT=0
fi
done
# check if the client and server went at least to the handshake stage
# (useful to avoid tests with only negative assertions and non-zero
# expected client exit to incorrectly succeed in case of catastrophic
# failure)
if is_polar "$SRV_CMD"; then
if grep "Performing the SSL/TLS handshake" $SRV_OUT >/dev/null; then :;
else
fail "server or client failed to reach handshake stage"
return
fi
fi
if is_polar "$CLI_CMD"; then
if grep "Performing the SSL/TLS handshake" $CLI_OUT >/dev/null; then :;
else
fail "server or client failed to reach handshake stage"
return
fi
fi
# check server exit code
if [ $? != 0 ]; then
fail "server fail"
return
fi
# check client exit code
if [ \( "$CLI_EXPECT" = 0 -a "$CLI_EXIT" != 0 \) -o \
\( "$CLI_EXPECT" != 0 -a "$CLI_EXIT" = 0 \) ]
then
fail "bad client exit code (expected $CLI_EXPECT, got $CLI_EXIT)"
return
fi
# check other assertions
# lines beginning with == are added by valgrind, ignore them
while [ $# -gt 0 ]
do
case $1 in
"-s")
if grep -v '^==' $SRV_OUT | grep "$2" >/dev/null; then :; else
fail "-s $2"
return
fi
;;
"-c")
if grep -v '^==' $CLI_OUT | grep "$2" >/dev/null; then :; else
fail "-c $2"
return
fi
;;
"-S")
if grep -v '^==' $SRV_OUT | grep "$2" >/dev/null; then
fail "-S $2"
return
fi
;;
"-C")
if grep -v '^==' $CLI_OUT | grep "$2" >/dev/null; then
fail "-C $2"
return
fi
;;
*)
echo "Unknown test: $1" >&2
exit 1
esac
shift 2
done
# check valgrind's results
if [ "$MEMCHECK" -gt 0 ]; then
if is_polar "$SRV_CMD" && has_mem_err $SRV_OUT; then
fail "Server has memory errors"
return
fi
if is_polar "$CLI_CMD" && has_mem_err $CLI_OUT; then
fail "Client has memory errors"
return
fi
fi
# if we're here, everything is ok
echo "PASS"
rm -f $SRV_OUT $CLI_OUT $PXY_OUT
}
cleanup() {
rm -f $CLI_OUT $SRV_OUT $PXY_OUT $SESSION
test -n "${SRV_PID:-}" && kill $SRV_PID >/dev/null 2>&1
test -n "${PXY_PID:-}" && kill $PXY_PID >/dev/null 2>&1
test -n "${CLI_PID:-}" && kill $CLI_PID >/dev/null 2>&1
test -n "${DOG_PID:-}" && kill $DOG_PID >/dev/null 2>&1
exit 1
}
#
# MAIN
#
if cd $( dirname $0 ); then :; else
echo "cd $( dirname $0 ) failed" >&2
exit 1
fi
get_options "$@"
# sanity checks, avoid an avalanche of errors
if [ ! -x "$P_SRV" ]; then
echo "Command '$P_SRV' is not an executable file"
exit 1
fi
if [ ! -x "$P_CLI" ]; then
echo "Command '$P_CLI' is not an executable file"
exit 1
fi
if [ ! -x "$P_PXY" ]; then
echo "Command '$P_PXY' is not an executable file"
exit 1
fi
if which $OPENSSL_CMD >/dev/null 2>&1; then :; else
echo "Command '$OPENSSL_CMD' not found"
exit 1
fi
# used by watchdog
MAIN_PID="$$"
# be more patient with valgrind
if [ "$MEMCHECK" -gt 0 ]; then
START_DELAY=3
DOG_DELAY=30
else
START_DELAY=1
DOG_DELAY=10
fi
CLI_DELAY_FACTOR=1
# Pick a "unique" server port in the range 10000-19999, and a proxy port
PORT_BASE="0000$$"
PORT_BASE="$( printf $PORT_BASE | tail -c 4 )"
SRV_PORT="1$PORT_BASE"
PXY_PORT="2$PORT_BASE"
unset PORT_BASE
# fix commands to use this port, force IPv4 while at it
# +SRV_PORT will be replaced by either $SRV_PORT or $PXY_PORT later
P_SRV="$P_SRV server_addr=127.0.0.1 server_port=$SRV_PORT"
P_CLI="$P_CLI server_addr=127.0.0.1 server_port=+SRV_PORT"
P_PXY="$P_PXY server_addr=127.0.0.1 server_port=$SRV_PORT listen_addr=127.0.0.1 listen_port=$PXY_PORT"
O_SRV="$O_SRV -accept $SRV_PORT -dhparam data_files/dhparams.pem"
O_CLI="$O_CLI -connect localhost:+SRV_PORT"
G_SRV="$G_SRV -p $SRV_PORT"
G_CLI="$G_CLI -p +SRV_PORT localhost"
# Also pick a unique name for intermediate files
SRV_OUT="srv_out.$$"
CLI_OUT="cli_out.$$"
PXY_OUT="pxy_out.$$"
SESSION="session.$$"
SKIP_NEXT="NO"
trap cleanup INT TERM HUP
# Basic test
# Checks that:
# - things work with all ciphersuites active (used with config-full in all.sh)
# - the expected (highest security) parameters are selected
# ("signature_algorithm ext: 6" means SHA-512 (highest common hash))
run_test "Default" \
"$P_SRV debug_level=3" \
"$P_CLI" \
0 \
-s "Protocol is TLSv1.2" \
-s "Ciphersuite is TLS-ECDHE-ECDSA-WITH-AES-256-GCM-SHA384" \
-s "client hello v3, signature_algorithm ext: 6" \
-s "ECDHE curve: secp521r1" \
-S "error" \
-C "error"
run_test "Default, DTLS" \
"$P_SRV dtls=1" \
"$P_CLI dtls=1" \
0 \
-s "Protocol is DTLSv1.2" \
-s "Ciphersuite is TLS-ECDHE-ECDSA-WITH-AES-256-GCM-SHA384"
# Tests for rc4 option
run_test "RC4: server disabled, client enabled" \
"$P_SRV" \
"$P_CLI force_ciphersuite=TLS-RSA-WITH-RC4-128-SHA" \
1 \
-s "SSL - The server has no ciphersuites in common"
run_test "RC4: server half, client enabled" \
"$P_SRV arc4=1" \
"$P_CLI force_ciphersuite=TLS-RSA-WITH-RC4-128-SHA" \
1 \
-s "SSL - The server has no ciphersuites in common"
run_test "RC4: server enabled, client disabled" \
"$P_SRV force_ciphersuite=TLS-RSA-WITH-RC4-128-SHA" \
"$P_CLI" \
1 \
-s "SSL - The server has no ciphersuites in common"
run_test "RC4: both enabled" \
"$P_SRV force_ciphersuite=TLS-RSA-WITH-RC4-128-SHA" \
"$P_CLI force_ciphersuite=TLS-RSA-WITH-RC4-128-SHA" \
0 \
-S "SSL - None of the common ciphersuites is usable" \
-S "SSL - The server has no ciphersuites in common"
# Tests for Truncated HMAC extension
run_test "Truncated HMAC: client default, server default" \
"$P_SRV debug_level=4" \
"$P_CLI force_ciphersuite=TLS-RSA-WITH-AES-128-CBC-SHA" \
0 \
-s "dumping 'computed mac' (20 bytes)" \
-S "dumping 'computed mac' (10 bytes)"
run_test "Truncated HMAC: client disabled, server default" \
"$P_SRV debug_level=4" \
"$P_CLI force_ciphersuite=TLS-RSA-WITH-AES-128-CBC-SHA \
trunc_hmac=0" \
0 \
-s "dumping 'computed mac' (20 bytes)" \
-S "dumping 'computed mac' (10 bytes)"
run_test "Truncated HMAC: client enabled, server default" \
"$P_SRV debug_level=4" \
"$P_CLI force_ciphersuite=TLS-RSA-WITH-AES-128-CBC-SHA \
trunc_hmac=1" \
0 \
-s "dumping 'computed mac' (20 bytes)" \
-S "dumping 'computed mac' (10 bytes)"
run_test "Truncated HMAC: client enabled, server disabled" \
"$P_SRV debug_level=4 trunc_hmac=0" \
"$P_CLI force_ciphersuite=TLS-RSA-WITH-AES-128-CBC-SHA \
trunc_hmac=1" \
0 \
-s "dumping 'computed mac' (20 bytes)" \
-S "dumping 'computed mac' (10 bytes)"
run_test "Truncated HMAC: client enabled, server enabled" \
"$P_SRV debug_level=4 trunc_hmac=1" \
"$P_CLI force_ciphersuite=TLS-RSA-WITH-AES-128-CBC-SHA \
trunc_hmac=1" \
0 \
-S "dumping 'computed mac' (20 bytes)" \
-s "dumping 'computed mac' (10 bytes)"
# Tests for Encrypt-then-MAC extension
run_test "Encrypt then MAC: default" \
"$P_SRV debug_level=3 \
force_ciphersuite=TLS-RSA-WITH-AES-128-CBC-SHA" \
"$P_CLI debug_level=3" \
0 \
-c "client hello, adding encrypt_then_mac extension" \
-s "found encrypt then mac extension" \
-s "server hello, adding encrypt then mac extension" \
-c "found encrypt_then_mac extension" \
-c "using encrypt then mac" \
-s "using encrypt then mac"
run_test "Encrypt then MAC: client enabled, server disabled" \
"$P_SRV debug_level=3 etm=0 \
force_ciphersuite=TLS-RSA-WITH-AES-128-CBC-SHA" \
"$P_CLI debug_level=3 etm=1" \
0 \
-c "client hello, adding encrypt_then_mac extension" \
-s "found encrypt then mac extension" \
-S "server hello, adding encrypt then mac extension" \
-C "found encrypt_then_mac extension" \
-C "using encrypt then mac" \
-S "using encrypt then mac"
run_test "Encrypt then MAC: client enabled, aead cipher" \
"$P_SRV debug_level=3 etm=1 \
force_ciphersuite=TLS-RSA-WITH-AES-128-GCM-SHA256" \
"$P_CLI debug_level=3 etm=1" \
0 \
-c "client hello, adding encrypt_then_mac extension" \
-s "found encrypt then mac extension" \
-S "server hello, adding encrypt then mac extension" \
-C "found encrypt_then_mac extension" \
-C "using encrypt then mac" \
-S "using encrypt then mac"
run_test "Encrypt then MAC: client enabled, stream cipher" \
"$P_SRV debug_level=3 etm=1 \
force_ciphersuite=TLS-RSA-WITH-RC4-128-SHA" \
"$P_CLI debug_level=3 etm=1 arc4=1 force_ciphersuite=TLS-RSA-WITH-RC4-128-SHA" \
0 \
-c "client hello, adding encrypt_then_mac extension" \
-s "found encrypt then mac extension" \
-S "server hello, adding encrypt then mac extension" \
-C "found encrypt_then_mac extension" \
-C "using encrypt then mac" \
-S "using encrypt then mac"
run_test "Encrypt then MAC: client disabled, server enabled" \
"$P_SRV debug_level=3 etm=1 \
force_ciphersuite=TLS-RSA-WITH-AES-128-CBC-SHA" \
"$P_CLI debug_level=3 etm=0" \
0 \
-C "client hello, adding encrypt_then_mac extension" \
-S "found encrypt then mac extension" \
-S "server hello, adding encrypt then mac extension" \
-C "found encrypt_then_mac extension" \
-C "using encrypt then mac" \
-S "using encrypt then mac"
run_test "Encrypt then MAC: client SSLv3, server enabled" \
"$P_SRV debug_level=3 min_version=ssl3 \
force_ciphersuite=TLS-RSA-WITH-AES-128-CBC-SHA" \
"$P_CLI debug_level=3 force_version=ssl3" \
0 \
-C "client hello, adding encrypt_then_mac extension" \
-S "found encrypt then mac extension" \
-S "server hello, adding encrypt then mac extension" \
-C "found encrypt_then_mac extension" \
-C "using encrypt then mac" \
-S "using encrypt then mac"
run_test "Encrypt then MAC: client enabled, server SSLv3" \
"$P_SRV debug_level=3 force_version=ssl3 \
force_ciphersuite=TLS-RSA-WITH-AES-128-CBC-SHA" \
"$P_CLI debug_level=3 min_version=ssl3" \
0 \
-c "client hello, adding encrypt_then_mac extension" \
-s "found encrypt then mac extension" \
-S "server hello, adding encrypt then mac extension" \
-C "found encrypt_then_mac extension" \
-C "using encrypt then mac" \
-S "using encrypt then mac"
# Tests for Extended Master Secret extension
run_test "Extended Master Secret: default" \
"$P_SRV debug_level=3" \
"$P_CLI debug_level=3" \
0 \
-c "client hello, adding extended_master_secret extension" \
-s "found extended master secret extension" \
-s "server hello, adding extended master secret extension" \
-c "found extended_master_secret extension" \
-c "using extended master secret" \
-s "using extended master secret"
run_test "Extended Master Secret: client enabled, server disabled" \
"$P_SRV debug_level=3 extended_ms=0" \
"$P_CLI debug_level=3 extended_ms=1" \
0 \
-c "client hello, adding extended_master_secret extension" \
-s "found extended master secret extension" \
-S "server hello, adding extended master secret extension" \
-C "found extended_master_secret extension" \
-C "using extended master secret" \
-S "using extended master secret"
run_test "Extended Master Secret: client disabled, server enabled" \
"$P_SRV debug_level=3 extended_ms=1" \
"$P_CLI debug_level=3 extended_ms=0" \
0 \
-C "client hello, adding extended_master_secret extension" \
-S "found extended master secret extension" \
-S "server hello, adding extended master secret extension" \
-C "found extended_master_secret extension" \
-C "using extended master secret" \
-S "using extended master secret"
run_test "Extended Master Secret: client SSLv3, server enabled" \
"$P_SRV debug_level=3 min_version=ssl3" \
"$P_CLI debug_level=3 force_version=ssl3" \
0 \
-C "client hello, adding extended_master_secret extension" \
-S "found extended master secret extension" \
-S "server hello, adding extended master secret extension" \
-C "found extended_master_secret extension" \
-C "using extended master secret" \
-S "using extended master secret"
run_test "Extended Master Secret: client enabled, server SSLv3" \
"$P_SRV debug_level=3 force_version=ssl3" \
"$P_CLI debug_level=3 min_version=ssl3" \
0 \
-c "client hello, adding extended_master_secret extension" \
-s "found extended master secret extension" \
-S "server hello, adding extended master secret extension" \
-C "found extended_master_secret extension" \
-C "using extended master secret" \
-S "using extended master secret"
# Tests for FALLBACK_SCSV
run_test "Fallback SCSV: default" \
"$P_SRV debug_level=2" \
"$P_CLI debug_level=3 force_version=tls1_1" \
0 \
-C "adding FALLBACK_SCSV" \
-S "received FALLBACK_SCSV" \
-S "inapropriate fallback" \
-C "is a fatal alert message (msg 86)"
run_test "Fallback SCSV: explicitly disabled" \
"$P_SRV debug_level=2" \
"$P_CLI debug_level=3 force_version=tls1_1 fallback=0" \
0 \
-C "adding FALLBACK_SCSV" \
-S "received FALLBACK_SCSV" \
-S "inapropriate fallback" \
-C "is a fatal alert message (msg 86)"
run_test "Fallback SCSV: enabled" \
"$P_SRV debug_level=2" \
"$P_CLI debug_level=3 force_version=tls1_1 fallback=1" \
1 \
-c "adding FALLBACK_SCSV" \
-s "received FALLBACK_SCSV" \
-s "inapropriate fallback" \
-c "is a fatal alert message (msg 86)"
run_test "Fallback SCSV: enabled, max version" \
"$P_SRV debug_level=2" \
"$P_CLI debug_level=3 fallback=1" \
0 \
-c "adding FALLBACK_SCSV" \
-s "received FALLBACK_SCSV" \
-S "inapropriate fallback" \
-C "is a fatal alert message (msg 86)"
requires_openssl_with_fallback_scsv
run_test "Fallback SCSV: default, openssl server" \
"$O_SRV" \
"$P_CLI debug_level=3 force_version=tls1_1 fallback=0" \
0 \
-C "adding FALLBACK_SCSV" \
-C "is a fatal alert message (msg 86)"
requires_openssl_with_fallback_scsv
run_test "Fallback SCSV: enabled, openssl server" \
"$O_SRV" \
"$P_CLI debug_level=3 force_version=tls1_1 fallback=1" \
1 \
-c "adding FALLBACK_SCSV" \
-c "is a fatal alert message (msg 86)"
requires_openssl_with_fallback_scsv
run_test "Fallback SCSV: disabled, openssl client" \
"$P_SRV debug_level=2" \
"$O_CLI -tls1_1" \
0 \
-S "received FALLBACK_SCSV" \
-S "inapropriate fallback"
requires_openssl_with_fallback_scsv
run_test "Fallback SCSV: enabled, openssl client" \
"$P_SRV debug_level=2" \
"$O_CLI -tls1_1 -fallback_scsv" \
1 \
-s "received FALLBACK_SCSV" \
-s "inapropriate fallback"
requires_openssl_with_fallback_scsv
run_test "Fallback SCSV: enabled, max version, openssl client" \
"$P_SRV debug_level=2" \
"$O_CLI -fallback_scsv" \
0 \
-s "received FALLBACK_SCSV" \
-S "inapropriate fallback"
# Tests for CBC 1/n-1 record splitting
run_test "CBC Record splitting: TLS 1.2, no splitting" \
"$P_SRV" \
"$P_CLI force_ciphersuite=TLS-RSA-WITH-AES-128-CBC-SHA \
request_size=123 force_version=tls1_2" \
0 \
-s "Read from client: 123 bytes read" \
-S "Read from client: 1 bytes read" \
-S "122 bytes read"
run_test "CBC Record splitting: TLS 1.1, no splitting" \
"$P_SRV" \
"$P_CLI force_ciphersuite=TLS-RSA-WITH-AES-128-CBC-SHA \
request_size=123 force_version=tls1_1" \
0 \
-s "Read from client: 123 bytes read" \
-S "Read from client: 1 bytes read" \
-S "122 bytes read"
run_test "CBC Record splitting: TLS 1.0, splitting" \
"$P_SRV" \
"$P_CLI force_ciphersuite=TLS-RSA-WITH-AES-128-CBC-SHA \
request_size=123 force_version=tls1" \
0 \
-S "Read from client: 123 bytes read" \
-s "Read from client: 1 bytes read" \
-s "122 bytes read"
run_test "CBC Record splitting: SSLv3, splitting" \
"$P_SRV min_version=ssl3" \
"$P_CLI force_ciphersuite=TLS-RSA-WITH-AES-128-CBC-SHA \
request_size=123 force_version=ssl3" \
0 \
-S "Read from client: 123 bytes read" \
-s "Read from client: 1 bytes read" \
-s "122 bytes read"
run_test "CBC Record splitting: TLS 1.0 RC4, no splitting" \
"$P_SRV arc4=1 force_ciphersuite=TLS-RSA-WITH-RC4-128-SHA" \
"$P_CLI force_ciphersuite=TLS-RSA-WITH-RC4-128-SHA \
request_size=123 force_version=tls1" \
0 \
-s "Read from client: 123 bytes read" \
-S "Read from client: 1 bytes read" \
-S "122 bytes read"
run_test "CBC Record splitting: TLS 1.0, splitting disabled" \
"$P_SRV" \
"$P_CLI force_ciphersuite=TLS-RSA-WITH-AES-128-CBC-SHA \
request_size=123 force_version=tls1 recsplit=0" \
0 \
-s "Read from client: 123 bytes read" \
-S "Read from client: 1 bytes read" \
-S "122 bytes read"
run_test "CBC Record splitting: TLS 1.0, splitting, nbio" \
"$P_SRV nbio=2" \
"$P_CLI nbio=2 force_ciphersuite=TLS-RSA-WITH-AES-128-CBC-SHA \
request_size=123 force_version=tls1" \
0 \
-S "Read from client: 123 bytes read" \
-s "Read from client: 1 bytes read" \
-s "122 bytes read"
# Tests for Session Tickets
run_test "Session resume using tickets: basic" \
"$P_SRV debug_level=3 tickets=1" \
"$P_CLI debug_level=3 tickets=1 reconnect=1" \
0 \
-c "client hello, adding session ticket extension" \
-s "found session ticket extension" \
-s "server hello, adding session ticket extension" \
-c "found session_ticket extension" \
-c "parse new session ticket" \
-S "session successfully restored from cache" \
-s "session successfully restored from ticket" \
-s "a session has been resumed" \
-c "a session has been resumed"
run_test "Session resume using tickets: cache disabled" \
"$P_SRV debug_level=3 tickets=1 cache_max=0" \
"$P_CLI debug_level=3 tickets=1 reconnect=1" \
0 \
-c "client hello, adding session ticket extension" \
-s "found session ticket extension" \
-s "server hello, adding session ticket extension" \
-c "found session_ticket extension" \
-c "parse new session ticket" \
-S "session successfully restored from cache" \
-s "session successfully restored from ticket" \
-s "a session has been resumed" \
-c "a session has been resumed"
run_test "Session resume using tickets: timeout" \
"$P_SRV debug_level=3 tickets=1 cache_max=0 ticket_timeout=1" \
"$P_CLI debug_level=3 tickets=1 reconnect=1 reco_delay=2" \
0 \
-c "client hello, adding session ticket extension" \
-s "found session ticket extension" \
-s "server hello, adding session ticket extension" \
-c "found session_ticket extension" \
-c "parse new session ticket" \
-S "session successfully restored from cache" \
-S "session successfully restored from ticket" \
-S "a session has been resumed" \
-C "a session has been resumed"
run_test "Session resume using tickets: openssl server" \
"$O_SRV" \
"$P_CLI debug_level=3 tickets=1 reconnect=1" \
0 \
-c "client hello, adding session ticket extension" \
-c "found session_ticket extension" \
-c "parse new session ticket" \
-c "a session has been resumed"
run_test "Session resume using tickets: openssl client" \
"$P_SRV debug_level=3 tickets=1" \
"( $O_CLI -sess_out $SESSION; \
$O_CLI -sess_in $SESSION; \
rm -f $SESSION )" \
0 \
-s "found session ticket extension" \
-s "server hello, adding session ticket extension" \
-S "session successfully restored from cache" \
-s "session successfully restored from ticket" \
-s "a session has been resumed"
# Tests for Session Resume based on session-ID and cache
run_test "Session resume using cache: tickets enabled on client" \
"$P_SRV debug_level=3 tickets=0" \
"$P_CLI debug_level=3 tickets=1 reconnect=1" \
0 \
-c "client hello, adding session ticket extension" \
-s "found session ticket extension" \
-S "server hello, adding session ticket extension" \
-C "found session_ticket extension" \
-C "parse new session ticket" \
-s "session successfully restored from cache" \
-S "session successfully restored from ticket" \
-s "a session has been resumed" \
-c "a session has been resumed"
run_test "Session resume using cache: tickets enabled on server" \
"$P_SRV debug_level=3 tickets=1" \
"$P_CLI debug_level=3 tickets=0 reconnect=1" \
0 \
-C "client hello, adding session ticket extension" \
-S "found session ticket extension" \
-S "server hello, adding session ticket extension" \
-C "found session_ticket extension" \
-C "parse new session ticket" \
-s "session successfully restored from cache" \
-S "session successfully restored from ticket" \
-s "a session has been resumed" \
-c "a session has been resumed"
run_test "Session resume using cache: cache_max=0" \
"$P_SRV debug_level=3 tickets=0 cache_max=0" \
"$P_CLI debug_level=3 tickets=0 reconnect=1" \
0 \
-S "session successfully restored from cache" \
-S "session successfully restored from ticket" \
-S "a session has been resumed" \
-C "a session has been resumed"
run_test "Session resume using cache: cache_max=1" \
"$P_SRV debug_level=3 tickets=0 cache_max=1" \
"$P_CLI debug_level=3 tickets=0 reconnect=1" \
0 \
-s "session successfully restored from cache" \
-S "session successfully restored from ticket" \
-s "a session has been resumed" \
-c "a session has been resumed"
run_test "Session resume using cache: timeout > delay" \
"$P_SRV debug_level=3 tickets=0" \
"$P_CLI debug_level=3 tickets=0 reconnect=1 reco_delay=0" \
0 \
-s "session successfully restored from cache" \
-S "session successfully restored from ticket" \
-s "a session has been resumed" \
-c "a session has been resumed"
run_test "Session resume using cache: timeout < delay" \
"$P_SRV debug_level=3 tickets=0 cache_timeout=1" \
"$P_CLI debug_level=3 tickets=0 reconnect=1 reco_delay=2" \
0 \
-S "session successfully restored from cache" \
-S "session successfully restored from ticket" \
-S "a session has been resumed" \
-C "a session has been resumed"
run_test "Session resume using cache: no timeout" \
"$P_SRV debug_level=3 tickets=0 cache_timeout=0" \
"$P_CLI debug_level=3 tickets=0 reconnect=1 reco_delay=2" \
0 \
-s "session successfully restored from cache" \
-S "session successfully restored from ticket" \
-s "a session has been resumed" \
-c "a session has been resumed"
run_test "Session resume using cache: openssl client" \
"$P_SRV debug_level=3 tickets=0" \
"( $O_CLI -sess_out $SESSION; \
$O_CLI -sess_in $SESSION; \
rm -f $SESSION )" \
0 \
-s "found session ticket extension" \
-S "server hello, adding session ticket extension" \
-s "session successfully restored from cache" \
-S "session successfully restored from ticket" \
-s "a session has been resumed"
run_test "Session resume using cache: openssl server" \
"$O_SRV" \
"$P_CLI debug_level=3 tickets=0 reconnect=1" \
0 \
-C "found session_ticket extension" \
-C "parse new session ticket" \
-c "a session has been resumed"
# Tests for Max Fragment Length extension
run_test "Max fragment length: not used, reference" \
"$P_SRV debug_level=3" \
"$P_CLI debug_level=3" \
0 \
-C "client hello, adding max_fragment_length extension" \
-S "found max fragment length extension" \
-S "server hello, max_fragment_length extension" \
-C "found max_fragment_length extension"
run_test "Max fragment length: used by client" \
"$P_SRV debug_level=3" \
"$P_CLI debug_level=3 max_frag_len=4096" \
0 \
-c "client hello, adding max_fragment_length extension" \
-s "found max fragment length extension" \
-s "server hello, max_fragment_length extension" \
-c "found max_fragment_length extension"
run_test "Max fragment length: used by server" \
"$P_SRV debug_level=3 max_frag_len=4096" \
"$P_CLI debug_level=3" \
0 \
-C "client hello, adding max_fragment_length extension" \
-S "found max fragment length extension" \
-S "server hello, max_fragment_length extension" \
-C "found max_fragment_length extension"
requires_gnutls
run_test "Max fragment length: gnutls server" \
"$G_SRV" \
"$P_CLI debug_level=3 max_frag_len=4096" \
0 \
-c "client hello, adding max_fragment_length extension" \
-c "found max_fragment_length extension"
run_test "Max fragment length: client, message just fits" \
"$P_SRV debug_level=3" \
"$P_CLI debug_level=3 max_frag_len=2048 request_size=2048" \
0 \
-c "client hello, adding max_fragment_length extension" \
-s "found max fragment length extension" \
-s "server hello, max_fragment_length extension" \
-c "found max_fragment_length extension" \
-c "2048 bytes written in 1 fragments" \
-s "2048 bytes read"
run_test "Max fragment length: client, larger message" \
"$P_SRV debug_level=3" \
"$P_CLI debug_level=3 max_frag_len=2048 request_size=2345" \
0 \
-c "client hello, adding max_fragment_length extension" \
-s "found max fragment length extension" \
-s "server hello, max_fragment_length extension" \
-c "found max_fragment_length extension" \
-c "2345 bytes written in 2 fragments" \
-s "2048 bytes read" \
-s "297 bytes read"
run_test "Max fragment length: DTLS client, larger message" \
"$P_SRV debug_level=3 dtls=1" \
"$P_CLI debug_level=3 dtls=1 max_frag_len=2048 request_size=2345" \
1 \
-c "client hello, adding max_fragment_length extension" \
-s "found max fragment length extension" \
-s "server hello, max_fragment_length extension" \
-c "found max_fragment_length extension" \
-c "fragment larger than.*maximum"
# Tests for renegotiation
run_test "Renegotiation: none, for reference" \
"$P_SRV debug_level=3 exchanges=2 auth_mode=optional" \
"$P_CLI debug_level=3 exchanges=2" \
0 \
-C "client hello, adding renegotiation extension" \
-s "received TLS_EMPTY_RENEGOTIATION_INFO" \
-S "found renegotiation extension" \
-s "server hello, secure renegotiation extension" \
-c "found renegotiation extension" \
-C "=> renegotiate" \
-S "=> renegotiate" \
-S "write hello request"
run_test "Renegotiation: client-initiated" \
"$P_SRV debug_level=3 exchanges=2 renegotiation=1 auth_mode=optional" \
"$P_CLI debug_level=3 exchanges=2 renegotiation=1 renegotiate=1" \
0 \
-c "client hello, adding renegotiation extension" \
-s "received TLS_EMPTY_RENEGOTIATION_INFO" \
-s "found renegotiation extension" \
-s "server hello, secure renegotiation extension" \
-c "found renegotiation extension" \
-c "=> renegotiate" \
-s "=> renegotiate" \
-S "write hello request"
run_test "Renegotiation: server-initiated" \
"$P_SRV debug_level=3 exchanges=2 renegotiation=1 auth_mode=optional renegotiate=1" \
"$P_CLI debug_level=3 exchanges=2 renegotiation=1" \
0 \
-c "client hello, adding renegotiation extension" \
-s "received TLS_EMPTY_RENEGOTIATION_INFO" \
-s "found renegotiation extension" \
-s "server hello, secure renegotiation extension" \
-c "found renegotiation extension" \
-c "=> renegotiate" \
-s "=> renegotiate" \
-s "write hello request"
run_test "Renegotiation: double" \
"$P_SRV debug_level=3 exchanges=2 renegotiation=1 auth_mode=optional renegotiate=1" \
"$P_CLI debug_level=3 exchanges=2 renegotiation=1 renegotiate=1" \
0 \
-c "client hello, adding renegotiation extension" \
-s "received TLS_EMPTY_RENEGOTIATION_INFO" \
-s "found renegotiation extension" \
-s "server hello, secure renegotiation extension" \
-c "found renegotiation extension" \
-c "=> renegotiate" \
-s "=> renegotiate" \
-s "write hello request"
run_test "Renegotiation: client-initiated, server-rejected" \
"$P_SRV debug_level=3 exchanges=2 renegotiation=0 auth_mode=optional" \
"$P_CLI debug_level=3 exchanges=2 renegotiation=1 renegotiate=1" \
1 \
-c "client hello, adding renegotiation extension" \
-s "received TLS_EMPTY_RENEGOTIATION_INFO" \
-S "found renegotiation extension" \
-s "server hello, secure renegotiation extension" \
-c "found renegotiation extension" \
-c "=> renegotiate" \
-S "=> renegotiate" \
-S "write hello request" \
-c "SSL - Unexpected message at ServerHello in renegotiation" \
-c "failed"
run_test "Renegotiation: server-initiated, client-rejected, default" \
"$P_SRV debug_level=3 exchanges=2 renegotiation=1 renegotiate=1 auth_mode=optional" \
"$P_CLI debug_level=3 exchanges=2 renegotiation=0" \
0 \
-C "client hello, adding renegotiation extension" \
-s "received TLS_EMPTY_RENEGOTIATION_INFO" \
-S "found renegotiation extension" \
-s "server hello, secure renegotiation extension" \
-c "found renegotiation extension" \
-C "=> renegotiate" \
-S "=> renegotiate" \
-s "write hello request" \
-S "SSL - An unexpected message was received from our peer" \
-S "failed"
run_test "Renegotiation: server-initiated, client-rejected, not enforced" \
"$P_SRV debug_level=3 exchanges=2 renegotiation=1 renegotiate=1 \
renego_delay=-1 auth_mode=optional" \
"$P_CLI debug_level=3 exchanges=2 renegotiation=0" \
0 \
-C "client hello, adding renegotiation extension" \
-s "received TLS_EMPTY_RENEGOTIATION_INFO" \
-S "found renegotiation extension" \
-s "server hello, secure renegotiation extension" \
-c "found renegotiation extension" \
-C "=> renegotiate" \
-S "=> renegotiate" \
-s "write hello request" \
-S "SSL - An unexpected message was received from our peer" \
-S "failed"
# delay 2 for 1 alert record + 1 application data record
run_test "Renegotiation: server-initiated, client-rejected, delay 2" \
"$P_SRV debug_level=3 exchanges=2 renegotiation=1 renegotiate=1 \
renego_delay=2 auth_mode=optional" \
"$P_CLI debug_level=3 exchanges=2 renegotiation=0" \
0 \
-C "client hello, adding renegotiation extension" \
-s "received TLS_EMPTY_RENEGOTIATION_INFO" \
-S "found renegotiation extension" \
-s "server hello, secure renegotiation extension" \
-c "found renegotiation extension" \
-C "=> renegotiate" \
-S "=> renegotiate" \
-s "write hello request" \
-S "SSL - An unexpected message was received from our peer" \
-S "failed"
run_test "Renegotiation: server-initiated, client-rejected, delay 0" \
"$P_SRV debug_level=3 exchanges=2 renegotiation=1 renegotiate=1 \
renego_delay=0 auth_mode=optional" \
"$P_CLI debug_level=3 exchanges=2 renegotiation=0" \
0 \
-C "client hello, adding renegotiation extension" \
-s "received TLS_EMPTY_RENEGOTIATION_INFO" \
-S "found renegotiation extension" \
-s "server hello, secure renegotiation extension" \
-c "found renegotiation extension" \
-C "=> renegotiate" \
-S "=> renegotiate" \
-s "write hello request" \
-s "SSL - An unexpected message was received from our peer"
run_test "Renegotiation: server-initiated, client-accepted, delay 0" \
"$P_SRV debug_level=3 exchanges=2 renegotiation=1 renegotiate=1 \
renego_delay=0 auth_mode=optional" \
"$P_CLI debug_level=3 exchanges=2 renegotiation=1" \
0 \
-c "client hello, adding renegotiation extension" \
-s "received TLS_EMPTY_RENEGOTIATION_INFO" \
-s "found renegotiation extension" \
-s "server hello, secure renegotiation extension" \
-c "found renegotiation extension" \
-c "=> renegotiate" \
-s "=> renegotiate" \
-s "write hello request" \
-S "SSL - An unexpected message was received from our peer" \
-S "failed"
run_test "Renegotiation: periodic, just below period" \
"$P_SRV debug_level=3 exchanges=9 renegotiation=1 renego_period=3 auth_mode=optional" \
"$P_CLI debug_level=3 exchanges=2 renegotiation=1" \
0 \
-C "client hello, adding renegotiation extension" \
-s "received TLS_EMPTY_RENEGOTIATION_INFO" \
-S "found renegotiation extension" \
-s "server hello, secure renegotiation extension" \
-c "found renegotiation extension" \
-S "record counter limit reached: renegotiate" \
-C "=> renegotiate" \
-S "=> renegotiate" \
-S "write hello request" \
-S "SSL - An unexpected message was received from our peer" \
-S "failed"
# one extra exchange to be able to complete renego
run_test "Renegotiation: periodic, just above period" \
"$P_SRV debug_level=3 exchanges=9 renegotiation=1 renego_period=3 auth_mode=optional" \
"$P_CLI debug_level=3 exchanges=4 renegotiation=1" \
0 \
-c "client hello, adding renegotiation extension" \
-s "received TLS_EMPTY_RENEGOTIATION_INFO" \
-s "found renegotiation extension" \
-s "server hello, secure renegotiation extension" \
-c "found renegotiation extension" \
-s "record counter limit reached: renegotiate" \
-c "=> renegotiate" \
-s "=> renegotiate" \
-s "write hello request" \
-S "SSL - An unexpected message was received from our peer" \
-S "failed"
run_test "Renegotiation: periodic, two times period" \
"$P_SRV debug_level=3 exchanges=9 renegotiation=1 renego_period=3 auth_mode=optional" \
"$P_CLI debug_level=3 exchanges=7 renegotiation=1" \
0 \
-c "client hello, adding renegotiation extension" \
-s "received TLS_EMPTY_RENEGOTIATION_INFO" \
-s "found renegotiation extension" \
-s "server hello, secure renegotiation extension" \
-c "found renegotiation extension" \
-s "record counter limit reached: renegotiate" \
-c "=> renegotiate" \
-s "=> renegotiate" \
-s "write hello request" \
-S "SSL - An unexpected message was received from our peer" \
-S "failed"
run_test "Renegotiation: periodic, above period, disabled" \
"$P_SRV debug_level=3 exchanges=9 renegotiation=0 renego_period=3 auth_mode=optional" \
"$P_CLI debug_level=3 exchanges=4 renegotiation=1" \
0 \
-C "client hello, adding renegotiation extension" \
-s "received TLS_EMPTY_RENEGOTIATION_INFO" \
-S "found renegotiation extension" \
-s "server hello, secure renegotiation extension" \
-c "found renegotiation extension" \
-S "record counter limit reached: renegotiate" \
-C "=> renegotiate" \
-S "=> renegotiate" \
-S "write hello request" \
-S "SSL - An unexpected message was received from our peer" \
-S "failed"
run_test "Renegotiation: nbio, client-initiated" \
"$P_SRV debug_level=3 nbio=2 exchanges=2 renegotiation=1 auth_mode=optional" \
"$P_CLI debug_level=3 nbio=2 exchanges=2 renegotiation=1 renegotiate=1" \
0 \
-c "client hello, adding renegotiation extension" \
-s "received TLS_EMPTY_RENEGOTIATION_INFO" \
-s "found renegotiation extension" \
-s "server hello, secure renegotiation extension" \
-c "found renegotiation extension" \
-c "=> renegotiate" \
-s "=> renegotiate" \
-S "write hello request"
run_test "Renegotiation: nbio, server-initiated" \
"$P_SRV debug_level=3 nbio=2 exchanges=2 renegotiation=1 renegotiate=1 auth_mode=optional" \
"$P_CLI debug_level=3 nbio=2 exchanges=2 renegotiation=1" \
0 \
-c "client hello, adding renegotiation extension" \
-s "received TLS_EMPTY_RENEGOTIATION_INFO" \
-s "found renegotiation extension" \
-s "server hello, secure renegotiation extension" \
-c "found renegotiation extension" \
-c "=> renegotiate" \
-s "=> renegotiate" \
-s "write hello request"
run_test "Renegotiation: openssl server, client-initiated" \
"$O_SRV -www" \
"$P_CLI debug_level=3 exchanges=1 renegotiation=1 renegotiate=1" \
0 \
-c "client hello, adding renegotiation extension" \
-c "found renegotiation extension" \
-c "=> renegotiate" \
-C "ssl_hanshake() returned" \
-C "error" \
-c "HTTP/1.0 200 [Oo][Kk]"
requires_gnutls
run_test "Renegotiation: gnutls server strict, client-initiated" \
"$G_SRV --priority=NORMAL:%SAFE_RENEGOTIATION" \
"$P_CLI debug_level=3 exchanges=1 renegotiation=1 renegotiate=1" \
0 \
-c "client hello, adding renegotiation extension" \
-c "found renegotiation extension" \
-c "=> renegotiate" \
-C "ssl_hanshake() returned" \
-C "error" \
-c "HTTP/1.0 200 [Oo][Kk]"
requires_gnutls
run_test "Renegotiation: gnutls server unsafe, client-initiated default" \
"$G_SRV --priority=NORMAL:%DISABLE_SAFE_RENEGOTIATION" \
"$P_CLI debug_level=3 exchanges=1 renegotiation=1 renegotiate=1" \
1 \
-c "client hello, adding renegotiation extension" \
-C "found renegotiation extension" \
-c "=> renegotiate" \
-c "mbedtls_ssl_handshake() returned" \
-c "error" \
-C "HTTP/1.0 200 [Oo][Kk]"
requires_gnutls
run_test "Renegotiation: gnutls server unsafe, client-inititated no legacy" \
"$G_SRV --priority=NORMAL:%DISABLE_SAFE_RENEGOTIATION" \
"$P_CLI debug_level=3 exchanges=1 renegotiation=1 renegotiate=1 \
allow_legacy=0" \
1 \
-c "client hello, adding renegotiation extension" \
-C "found renegotiation extension" \
-c "=> renegotiate" \
-c "mbedtls_ssl_handshake() returned" \
-c "error" \
-C "HTTP/1.0 200 [Oo][Kk]"
requires_gnutls
run_test "Renegotiation: gnutls server unsafe, client-inititated legacy" \
"$G_SRV --priority=NORMAL:%DISABLE_SAFE_RENEGOTIATION" \
"$P_CLI debug_level=3 exchanges=1 renegotiation=1 renegotiate=1 \
allow_legacy=1" \
0 \
-c "client hello, adding renegotiation extension" \
-C "found renegotiation extension" \
-c "=> renegotiate" \
-C "ssl_hanshake() returned" \
-C "error" \
-c "HTTP/1.0 200 [Oo][Kk]"
run_test "Renegotiation: DTLS, client-initiated" \
"$P_SRV debug_level=3 dtls=1 exchanges=2 renegotiation=1" \
"$P_CLI debug_level=3 dtls=1 exchanges=2 renegotiation=1 renegotiate=1" \
0 \
-c "client hello, adding renegotiation extension" \
-s "received TLS_EMPTY_RENEGOTIATION_INFO" \
-s "found renegotiation extension" \
-s "server hello, secure renegotiation extension" \
-c "found renegotiation extension" \
-c "=> renegotiate" \
-s "=> renegotiate" \
-S "write hello request"
run_test "Renegotiation: DTLS, server-initiated" \
"$P_SRV debug_level=3 dtls=1 exchanges=2 renegotiation=1 renegotiate=1" \
"$P_CLI debug_level=3 dtls=1 exchanges=2 renegotiation=1 \
read_timeout=1000 max_resend=2" \
0 \
-c "client hello, adding renegotiation extension" \
-s "received TLS_EMPTY_RENEGOTIATION_INFO" \
-s "found renegotiation extension" \
-s "server hello, secure renegotiation extension" \
-c "found renegotiation extension" \
-c "=> renegotiate" \
-s "=> renegotiate" \
-s "write hello request"
requires_gnutls
run_test "Renegotiation: DTLS, gnutls server, client-initiated" \
"$G_SRV -u --mtu 4096" \
"$P_CLI debug_level=3 dtls=1 exchanges=1 renegotiation=1 renegotiate=1" \
0 \
-c "client hello, adding renegotiation extension" \
-c "found renegotiation extension" \
-c "=> renegotiate" \
-C "mbedtls_ssl_handshake returned" \
-C "error" \
-s "Extra-header:"
# Test for the "secure renegotation" extension only (no actual renegotiation)
requires_gnutls
run_test "Renego ext: gnutls server strict, client default" \
"$G_SRV --priority=NORMAL:%SAFE_RENEGOTIATION" \
"$P_CLI debug_level=3" \
0 \
-c "found renegotiation extension" \
-C "error" \
-c "HTTP/1.0 200 [Oo][Kk]"
requires_gnutls
run_test "Renego ext: gnutls server unsafe, client default" \
"$G_SRV --priority=NORMAL:%DISABLE_SAFE_RENEGOTIATION" \
"$P_CLI debug_level=3" \
0 \
-C "found renegotiation extension" \
-C "error" \
-c "HTTP/1.0 200 [Oo][Kk]"
requires_gnutls
run_test "Renego ext: gnutls server unsafe, client break legacy" \
"$G_SRV --priority=NORMAL:%DISABLE_SAFE_RENEGOTIATION" \
"$P_CLI debug_level=3 allow_legacy=-1" \
1 \
-C "found renegotiation extension" \
-c "error" \
-C "HTTP/1.0 200 [Oo][Kk]"
requires_gnutls
run_test "Renego ext: gnutls client strict, server default" \
"$P_SRV debug_level=3" \
"$G_CLI --priority=NORMAL:%SAFE_RENEGOTIATION" \
0 \
-s "received TLS_EMPTY_RENEGOTIATION_INFO\|found renegotiation extension" \
-s "server hello, secure renegotiation extension"
requires_gnutls
run_test "Renego ext: gnutls client unsafe, server default" \
"$P_SRV debug_level=3" \
"$G_CLI --priority=NORMAL:%DISABLE_SAFE_RENEGOTIATION" \
0 \
-S "received TLS_EMPTY_RENEGOTIATION_INFO\|found renegotiation extension" \
-S "server hello, secure renegotiation extension"
requires_gnutls
run_test "Renego ext: gnutls client unsafe, server break legacy" \
"$P_SRV debug_level=3 allow_legacy=-1" \
"$G_CLI --priority=NORMAL:%DISABLE_SAFE_RENEGOTIATION" \
1 \
-S "received TLS_EMPTY_RENEGOTIATION_INFO\|found renegotiation extension" \
-S "server hello, secure renegotiation extension"
# Tests for auth_mode
run_test "Authentication: server badcert, client required" \
"$P_SRV crt_file=data_files/server5-badsign.crt \
key_file=data_files/server5.key" \
"$P_CLI debug_level=1 auth_mode=required" \
1 \
-c "x509_verify_cert() returned" \
-c "! The certificate is not correctly signed by the trusted CA" \
-c "! mbedtls_ssl_handshake returned" \
-c "X509 - Certificate verification failed"
run_test "Authentication: server badcert, client optional" \
"$P_SRV crt_file=data_files/server5-badsign.crt \
key_file=data_files/server5.key" \
"$P_CLI debug_level=1 auth_mode=optional" \
0 \
-c "x509_verify_cert() returned" \
-c "! The certificate is not correctly signed by the trusted CA" \
-C "! mbedtls_ssl_handshake returned" \
-C "X509 - Certificate verification failed"
run_test "Authentication: server badcert, client none" \
"$P_SRV crt_file=data_files/server5-badsign.crt \
key_file=data_files/server5.key" \
"$P_CLI debug_level=1 auth_mode=none" \
0 \
-C "x509_verify_cert() returned" \
-C "! The certificate is not correctly signed by the trusted CA" \
-C "! mbedtls_ssl_handshake returned" \
-C "X509 - Certificate verification failed"
run_test "Authentication: client badcert, server required" \
"$P_SRV debug_level=3 auth_mode=required" \
"$P_CLI debug_level=3 crt_file=data_files/server5-badsign.crt \
key_file=data_files/server5.key" \
1 \
-S "skip write certificate request" \
-C "skip parse certificate request" \
-c "got a certificate request" \
-C "skip write certificate" \
-C "skip write certificate verify" \
-S "skip parse certificate verify" \
-s "x509_verify_cert() returned" \
-s "! The certificate is not correctly signed by the trusted CA" \
-s "! mbedtls_ssl_handshake returned" \
-c "! mbedtls_ssl_handshake returned" \
-s "X509 - Certificate verification failed"
run_test "Authentication: client badcert, server optional" \
"$P_SRV debug_level=3 auth_mode=optional" \
"$P_CLI debug_level=3 crt_file=data_files/server5-badsign.crt \
key_file=data_files/server5.key" \
0 \
-S "skip write certificate request" \
-C "skip parse certificate request" \
-c "got a certificate request" \
-C "skip write certificate" \
-C "skip write certificate verify" \
-S "skip parse certificate verify" \
-s "x509_verify_cert() returned" \
-s "! The certificate is not correctly signed by the trusted CA" \
-S "! mbedtls_ssl_handshake returned" \
-C "! mbedtls_ssl_handshake returned" \
-S "X509 - Certificate verification failed"
run_test "Authentication: client badcert, server none" \
"$P_SRV debug_level=3 auth_mode=none" \
"$P_CLI debug_level=3 crt_file=data_files/server5-badsign.crt \
key_file=data_files/server5.key" \
0 \
-s "skip write certificate request" \
-C "skip parse certificate request" \
-c "got no certificate request" \
-c "skip write certificate" \
-c "skip write certificate verify" \
-s "skip parse certificate verify" \
-S "x509_verify_cert() returned" \
-S "! The certificate is not correctly signed by the trusted CA" \
-S "! mbedtls_ssl_handshake returned" \
-C "! mbedtls_ssl_handshake returned" \
-S "X509 - Certificate verification failed"
run_test "Authentication: client no cert, server optional" \
"$P_SRV debug_level=3 auth_mode=optional" \
"$P_CLI debug_level=3 crt_file=none key_file=none" \
0 \
-S "skip write certificate request" \
-C "skip parse certificate request" \
-c "got a certificate request" \
-C "skip write certificate$" \
-C "got no certificate to send" \
-S "SSLv3 client has no certificate" \
-c "skip write certificate verify" \
-s "skip parse certificate verify" \
-s "! Certificate was missing" \
-S "! mbedtls_ssl_handshake returned" \
-C "! mbedtls_ssl_handshake returned" \
-S "X509 - Certificate verification failed"
run_test "Authentication: openssl client no cert, server optional" \
"$P_SRV debug_level=3 auth_mode=optional" \
"$O_CLI" \
0 \
-S "skip write certificate request" \
-s "skip parse certificate verify" \
-s "! Certificate was missing" \
-S "! mbedtls_ssl_handshake returned" \
-S "X509 - Certificate verification failed"
run_test "Authentication: client no cert, openssl server optional" \
"$O_SRV -verify 10" \
"$P_CLI debug_level=3 crt_file=none key_file=none" \
0 \
-C "skip parse certificate request" \
-c "got a certificate request" \
-C "skip write certificate$" \
-c "skip write certificate verify" \
-C "! mbedtls_ssl_handshake returned"
run_test "Authentication: client no cert, ssl3" \
"$P_SRV debug_level=3 auth_mode=optional force_version=ssl3" \
"$P_CLI debug_level=3 crt_file=none key_file=none min_version=ssl3" \
0 \
-S "skip write certificate request" \
-C "skip parse certificate request" \
-c "got a certificate request" \
-C "skip write certificate$" \
-c "skip write certificate verify" \
-c "got no certificate to send" \
-s "SSLv3 client has no certificate" \
-s "skip parse certificate verify" \
-s "! Certificate was missing" \
-S "! mbedtls_ssl_handshake returned" \
-C "! mbedtls_ssl_handshake returned" \
-S "X509 - Certificate verification failed"
# Tests for certificate selection based on SHA verson
run_test "Certificate hash: client TLS 1.2 -> SHA-2" \
"$P_SRV crt_file=data_files/server5.crt \
key_file=data_files/server5.key \
crt_file2=data_files/server5-sha1.crt \
key_file2=data_files/server5.key" \
"$P_CLI force_version=tls1_2" \
0 \
-c "signed using.*ECDSA with SHA256" \
-C "signed using.*ECDSA with SHA1"
run_test "Certificate hash: client TLS 1.1 -> SHA-1" \
"$P_SRV crt_file=data_files/server5.crt \
key_file=data_files/server5.key \
crt_file2=data_files/server5-sha1.crt \
key_file2=data_files/server5.key" \
"$P_CLI force_version=tls1_1" \
0 \
-C "signed using.*ECDSA with SHA256" \
-c "signed using.*ECDSA with SHA1"
run_test "Certificate hash: client TLS 1.0 -> SHA-1" \
"$P_SRV crt_file=data_files/server5.crt \
key_file=data_files/server5.key \
crt_file2=data_files/server5-sha1.crt \
key_file2=data_files/server5.key" \
"$P_CLI force_version=tls1" \
0 \
-C "signed using.*ECDSA with SHA256" \
-c "signed using.*ECDSA with SHA1"
run_test "Certificate hash: client TLS 1.1, no SHA-1 -> SHA-2 (order 1)" \
"$P_SRV crt_file=data_files/server5.crt \
key_file=data_files/server5.key \
crt_file2=data_files/server6.crt \
key_file2=data_files/server6.key" \
"$P_CLI force_version=tls1_1" \
0 \
-c "serial number.*09" \
-c "signed using.*ECDSA with SHA256" \
-C "signed using.*ECDSA with SHA1"
run_test "Certificate hash: client TLS 1.1, no SHA-1 -> SHA-2 (order 2)" \
"$P_SRV crt_file=data_files/server6.crt \
key_file=data_files/server6.key \
crt_file2=data_files/server5.crt \
key_file2=data_files/server5.key" \
"$P_CLI force_version=tls1_1" \
0 \
-c "serial number.*0A" \
-c "signed using.*ECDSA with SHA256" \
-C "signed using.*ECDSA with SHA1"
# tests for SNI
run_test "SNI: no SNI callback" \
"$P_SRV debug_level=3 \
crt_file=data_files/server5.crt key_file=data_files/server5.key" \
"$P_CLI server_name=localhost" \
0 \
-S "parse ServerName extension" \
-c "issuer name *: C=NL, O=PolarSSL, CN=Polarssl Test EC CA" \
-c "subject name *: C=NL, O=PolarSSL, CN=localhost"
run_test "SNI: matching cert 1" \
"$P_SRV debug_level=3 \
crt_file=data_files/server5.crt key_file=data_files/server5.key \
sni=localhost,data_files/server2.crt,data_files/server2.key,-,-,-,polarssl.example,data_files/server1-nospace.crt,data_files/server1.key,-,-,-" \
"$P_CLI server_name=localhost" \
0 \
-s "parse ServerName extension" \
-c "issuer name *: C=NL, O=PolarSSL, CN=PolarSSL Test CA" \
-c "subject name *: C=NL, O=PolarSSL, CN=localhost"
run_test "SNI: matching cert 2" \
"$P_SRV debug_level=3 \
crt_file=data_files/server5.crt key_file=data_files/server5.key \
sni=localhost,data_files/server2.crt,data_files/server2.key,-,-,-,polarssl.example,data_files/server1-nospace.crt,data_files/server1.key,-,-,-" \
"$P_CLI server_name=polarssl.example" \
0 \
-s "parse ServerName extension" \
-c "issuer name *: C=NL, O=PolarSSL, CN=PolarSSL Test CA" \
-c "subject name *: C=NL, O=PolarSSL, CN=polarssl.example"
run_test "SNI: no matching cert" \
"$P_SRV debug_level=3 \
crt_file=data_files/server5.crt key_file=data_files/server5.key \
sni=localhost,data_files/server2.crt,data_files/server2.key,-,-,-,polarssl.example,data_files/server1-nospace.crt,data_files/server1.key,-,-,-" \
"$P_CLI server_name=nonesuch.example" \
1 \
-s "parse ServerName extension" \
-s "ssl_sni_wrapper() returned" \
-s "mbedtls_ssl_handshake returned" \
-c "mbedtls_ssl_handshake returned" \
-c "SSL - A fatal alert message was received from our peer"
run_test "SNI: client auth no override: optional" \
"$P_SRV debug_level=3 auth_mode=optional \
crt_file=data_files/server5.crt key_file=data_files/server5.key \
sni=localhost,data_files/server2.crt,data_files/server2.key,-,-,-" \
"$P_CLI debug_level=3 server_name=localhost" \
0 \
-S "skip write certificate request" \
-C "skip parse certificate request" \
-c "got a certificate request" \
-C "skip write certificate" \
-C "skip write certificate verify" \
-S "skip parse certificate verify"
run_test "SNI: client auth override: none -> optional" \
"$P_SRV debug_level=3 auth_mode=none \
crt_file=data_files/server5.crt key_file=data_files/server5.key \
sni=localhost,data_files/server2.crt,data_files/server2.key,-,-,optional" \
"$P_CLI debug_level=3 server_name=localhost" \
0 \
-S "skip write certificate request" \
-C "skip parse certificate request" \
-c "got a certificate request" \
-C "skip write certificate" \
-C "skip write certificate verify" \
-S "skip parse certificate verify"
run_test "SNI: client auth override: optional -> none" \
"$P_SRV debug_level=3 auth_mode=optional \
crt_file=data_files/server5.crt key_file=data_files/server5.key \
sni=localhost,data_files/server2.crt,data_files/server2.key,-,-,none" \
"$P_CLI debug_level=3 server_name=localhost" \
0 \
-s "skip write certificate request" \
-C "skip parse certificate request" \
-c "got no certificate request" \
-c "skip write certificate" \
-c "skip write certificate verify" \
-s "skip parse certificate verify"
run_test "SNI: CA no override" \
"$P_SRV debug_level=3 auth_mode=optional \
crt_file=data_files/server5.crt key_file=data_files/server5.key \
ca_file=data_files/test-ca.crt \
sni=localhost,data_files/server2.crt,data_files/server2.key,-,-,required" \
"$P_CLI debug_level=3 server_name=localhost \
crt_file=data_files/server6.crt key_file=data_files/server6.key" \
1 \
-S "skip write certificate request" \
-C "skip parse certificate request" \
-c "got a certificate request" \
-C "skip write certificate" \
-C "skip write certificate verify" \
-S "skip parse certificate verify" \
-s "x509_verify_cert() returned" \
-s "! The certificate is not correctly signed by the trusted CA" \
-S "The certificate has been revoked (is on a CRL)"
run_test "SNI: CA override" \
"$P_SRV debug_level=3 auth_mode=optional \
crt_file=data_files/server5.crt key_file=data_files/server5.key \
ca_file=data_files/test-ca.crt \
sni=localhost,data_files/server2.crt,data_files/server2.key,data_files/test-ca2.crt,-,required" \
"$P_CLI debug_level=3 server_name=localhost \
crt_file=data_files/server6.crt key_file=data_files/server6.key" \
0 \
-S "skip write certificate request" \
-C "skip parse certificate request" \
-c "got a certificate request" \
-C "skip write certificate" \
-C "skip write certificate verify" \
-S "skip parse certificate verify" \
-S "x509_verify_cert() returned" \
-S "! The certificate is not correctly signed by the trusted CA" \
-S "The certificate has been revoked (is on a CRL)"
run_test "SNI: CA override with CRL" \
"$P_SRV debug_level=3 auth_mode=optional \
crt_file=data_files/server5.crt key_file=data_files/server5.key \
ca_file=data_files/test-ca.crt \
sni=localhost,data_files/server2.crt,data_files/server2.key,data_files/test-ca2.crt,data_files/crl-ec-sha256.pem,required" \
"$P_CLI debug_level=3 server_name=localhost \
crt_file=data_files/server6.crt key_file=data_files/server6.key" \
1 \
-S "skip write certificate request" \
-C "skip parse certificate request" \
-c "got a certificate request" \
-C "skip write certificate" \
-C "skip write certificate verify" \
-S "skip parse certificate verify" \
-s "x509_verify_cert() returned" \
-S "! The certificate is not correctly signed by the trusted CA" \
-s "The certificate has been revoked (is on a CRL)"
# Tests for non-blocking I/O: exercise a variety of handshake flows
run_test "Non-blocking I/O: basic handshake" \
"$P_SRV nbio=2 tickets=0 auth_mode=none" \
"$P_CLI nbio=2 tickets=0" \
0 \
-S "mbedtls_ssl_handshake returned" \
-C "mbedtls_ssl_handshake returned" \
-c "Read from server: .* bytes read"
run_test "Non-blocking I/O: client auth" \
"$P_SRV nbio=2 tickets=0 auth_mode=required" \
"$P_CLI nbio=2 tickets=0" \
0 \
-S "mbedtls_ssl_handshake returned" \
-C "mbedtls_ssl_handshake returned" \
-c "Read from server: .* bytes read"
run_test "Non-blocking I/O: ticket" \
"$P_SRV nbio=2 tickets=1 auth_mode=none" \
"$P_CLI nbio=2 tickets=1" \
0 \
-S "mbedtls_ssl_handshake returned" \
-C "mbedtls_ssl_handshake returned" \
-c "Read from server: .* bytes read"
run_test "Non-blocking I/O: ticket + client auth" \
"$P_SRV nbio=2 tickets=1 auth_mode=required" \
"$P_CLI nbio=2 tickets=1" \
0 \
-S "mbedtls_ssl_handshake returned" \
-C "mbedtls_ssl_handshake returned" \
-c "Read from server: .* bytes read"
run_test "Non-blocking I/O: ticket + client auth + resume" \
"$P_SRV nbio=2 tickets=1 auth_mode=required" \
"$P_CLI nbio=2 tickets=1 reconnect=1" \
0 \
-S "mbedtls_ssl_handshake returned" \
-C "mbedtls_ssl_handshake returned" \
-c "Read from server: .* bytes read"
run_test "Non-blocking I/O: ticket + resume" \
"$P_SRV nbio=2 tickets=1 auth_mode=none" \
"$P_CLI nbio=2 tickets=1 reconnect=1" \
0 \
-S "mbedtls_ssl_handshake returned" \
-C "mbedtls_ssl_handshake returned" \
-c "Read from server: .* bytes read"
run_test "Non-blocking I/O: session-id resume" \
"$P_SRV nbio=2 tickets=0 auth_mode=none" \
"$P_CLI nbio=2 tickets=0 reconnect=1" \
0 \
-S "mbedtls_ssl_handshake returned" \
-C "mbedtls_ssl_handshake returned" \
-c "Read from server: .* bytes read"
# Tests for version negotiation
run_test "Version check: all -> 1.2" \
"$P_SRV" \
"$P_CLI" \
0 \
-S "mbedtls_ssl_handshake returned" \
-C "mbedtls_ssl_handshake returned" \
-s "Protocol is TLSv1.2" \
-c "Protocol is TLSv1.2"
run_test "Version check: cli max 1.1 -> 1.1" \
"$P_SRV" \
"$P_CLI max_version=tls1_1" \
0 \
-S "mbedtls_ssl_handshake returned" \
-C "mbedtls_ssl_handshake returned" \
-s "Protocol is TLSv1.1" \
-c "Protocol is TLSv1.1"
run_test "Version check: srv max 1.1 -> 1.1" \
"$P_SRV max_version=tls1_1" \
"$P_CLI" \
0 \
-S "mbedtls_ssl_handshake returned" \
-C "mbedtls_ssl_handshake returned" \
-s "Protocol is TLSv1.1" \
-c "Protocol is TLSv1.1"
run_test "Version check: cli+srv max 1.1 -> 1.1" \
"$P_SRV max_version=tls1_1" \
"$P_CLI max_version=tls1_1" \
0 \
-S "mbedtls_ssl_handshake returned" \
-C "mbedtls_ssl_handshake returned" \
-s "Protocol is TLSv1.1" \
-c "Protocol is TLSv1.1"
run_test "Version check: cli max 1.1, srv min 1.1 -> 1.1" \
"$P_SRV min_version=tls1_1" \
"$P_CLI max_version=tls1_1" \
0 \
-S "mbedtls_ssl_handshake returned" \
-C "mbedtls_ssl_handshake returned" \
-s "Protocol is TLSv1.1" \
-c "Protocol is TLSv1.1"
run_test "Version check: cli min 1.1, srv max 1.1 -> 1.1" \
"$P_SRV max_version=tls1_1" \
"$P_CLI min_version=tls1_1" \
0 \
-S "mbedtls_ssl_handshake returned" \
-C "mbedtls_ssl_handshake returned" \
-s "Protocol is TLSv1.1" \
-c "Protocol is TLSv1.1"
run_test "Version check: cli min 1.2, srv max 1.1 -> fail" \
"$P_SRV max_version=tls1_1" \
"$P_CLI min_version=tls1_2" \
1 \
-s "mbedtls_ssl_handshake returned" \
-c "mbedtls_ssl_handshake returned" \
-c "SSL - Handshake protocol not within min/max boundaries"
run_test "Version check: srv min 1.2, cli max 1.1 -> fail" \
"$P_SRV min_version=tls1_2" \
"$P_CLI max_version=tls1_1" \
1 \
-s "mbedtls_ssl_handshake returned" \
-c "mbedtls_ssl_handshake returned" \
-s "SSL - Handshake protocol not within min/max boundaries"
# Tests for ALPN extension
run_test "ALPN: none" \
"$P_SRV debug_level=3" \
"$P_CLI debug_level=3" \
0 \
-C "client hello, adding alpn extension" \
-S "found alpn extension" \
-C "got an alert message, type: \\[2:120]" \
-S "server hello, adding alpn extension" \
-C "found alpn extension " \
-C "Application Layer Protocol is" \
-S "Application Layer Protocol is"
run_test "ALPN: client only" \
"$P_SRV debug_level=3" \
"$P_CLI debug_level=3 alpn=abc,1234" \
0 \
-c "client hello, adding alpn extension" \
-s "found alpn extension" \
-C "got an alert message, type: \\[2:120]" \
-S "server hello, adding alpn extension" \
-C "found alpn extension " \
-c "Application Layer Protocol is (none)" \
-S "Application Layer Protocol is"
run_test "ALPN: server only" \
"$P_SRV debug_level=3 alpn=abc,1234" \
"$P_CLI debug_level=3" \
0 \
-C "client hello, adding alpn extension" \
-S "found alpn extension" \
-C "got an alert message, type: \\[2:120]" \
-S "server hello, adding alpn extension" \
-C "found alpn extension " \
-C "Application Layer Protocol is" \
-s "Application Layer Protocol is (none)"
run_test "ALPN: both, common cli1-srv1" \
"$P_SRV debug_level=3 alpn=abc,1234" \
"$P_CLI debug_level=3 alpn=abc,1234" \
0 \
-c "client hello, adding alpn extension" \
-s "found alpn extension" \
-C "got an alert message, type: \\[2:120]" \
-s "server hello, adding alpn extension" \
-c "found alpn extension" \
-c "Application Layer Protocol is abc" \
-s "Application Layer Protocol is abc"
run_test "ALPN: both, common cli2-srv1" \
"$P_SRV debug_level=3 alpn=abc,1234" \
"$P_CLI debug_level=3 alpn=1234,abc" \
0 \
-c "client hello, adding alpn extension" \
-s "found alpn extension" \
-C "got an alert message, type: \\[2:120]" \
-s "server hello, adding alpn extension" \
-c "found alpn extension" \
-c "Application Layer Protocol is abc" \
-s "Application Layer Protocol is abc"
run_test "ALPN: both, common cli1-srv2" \
"$P_SRV debug_level=3 alpn=abc,1234" \
"$P_CLI debug_level=3 alpn=1234,abcde" \
0 \
-c "client hello, adding alpn extension" \
-s "found alpn extension" \
-C "got an alert message, type: \\[2:120]" \
-s "server hello, adding alpn extension" \
-c "found alpn extension" \
-c "Application Layer Protocol is 1234" \
-s "Application Layer Protocol is 1234"
run_test "ALPN: both, no common" \
"$P_SRV debug_level=3 alpn=abc,123" \
"$P_CLI debug_level=3 alpn=1234,abcde" \
1 \
-c "client hello, adding alpn extension" \
-s "found alpn extension" \
-c "got an alert message, type: \\[2:120]" \
-S "server hello, adding alpn extension" \
-C "found alpn extension" \
-C "Application Layer Protocol is 1234" \
-S "Application Layer Protocol is 1234"
# Tests for keyUsage in leaf certificates, part 1:
# server-side certificate/suite selection
run_test "keyUsage srv: RSA, digitalSignature -> (EC)DHE-RSA" \
"$P_SRV key_file=data_files/server2.key \
crt_file=data_files/server2.ku-ds.crt" \
"$P_CLI" \
0 \
-c "Ciphersuite is TLS-[EC]*DHE-RSA-WITH-"
run_test "keyUsage srv: RSA, keyEncipherment -> RSA" \
"$P_SRV key_file=data_files/server2.key \
crt_file=data_files/server2.ku-ke.crt" \
"$P_CLI" \
0 \
-c "Ciphersuite is TLS-RSA-WITH-"
run_test "keyUsage srv: RSA, keyAgreement -> fail" \
"$P_SRV key_file=data_files/server2.key \
crt_file=data_files/server2.ku-ka.crt" \
"$P_CLI" \
1 \
-C "Ciphersuite is "
run_test "keyUsage srv: ECDSA, digitalSignature -> ECDHE-ECDSA" \
"$P_SRV key_file=data_files/server5.key \
crt_file=data_files/server5.ku-ds.crt" \
"$P_CLI" \
0 \
-c "Ciphersuite is TLS-ECDHE-ECDSA-WITH-"
run_test "keyUsage srv: ECDSA, keyAgreement -> ECDH-" \
"$P_SRV key_file=data_files/server5.key \
crt_file=data_files/server5.ku-ka.crt" \
"$P_CLI" \
0 \
-c "Ciphersuite is TLS-ECDH-"
run_test "keyUsage srv: ECDSA, keyEncipherment -> fail" \
"$P_SRV key_file=data_files/server5.key \
crt_file=data_files/server5.ku-ke.crt" \
"$P_CLI" \
1 \
-C "Ciphersuite is "
# Tests for keyUsage in leaf certificates, part 2:
# client-side checking of server cert
run_test "keyUsage cli: DigitalSignature+KeyEncipherment, RSA: OK" \
"$O_SRV -key data_files/server2.key \
-cert data_files/server2.ku-ds_ke.crt" \
"$P_CLI debug_level=1 \
force_ciphersuite=TLS-RSA-WITH-AES-128-CBC-SHA" \
0 \
-C "bad certificate (usage extensions)" \
-C "Processing of the Certificate handshake message failed" \
-c "Ciphersuite is TLS-"
run_test "keyUsage cli: DigitalSignature+KeyEncipherment, DHE-RSA: OK" \
"$O_SRV -key data_files/server2.key \
-cert data_files/server2.ku-ds_ke.crt" \
"$P_CLI debug_level=1 \
force_ciphersuite=TLS-DHE-RSA-WITH-AES-128-CBC-SHA" \
0 \
-C "bad certificate (usage extensions)" \
-C "Processing of the Certificate handshake message failed" \
-c "Ciphersuite is TLS-"
run_test "keyUsage cli: KeyEncipherment, RSA: OK" \
"$O_SRV -key data_files/server2.key \
-cert data_files/server2.ku-ke.crt" \
"$P_CLI debug_level=1 \
force_ciphersuite=TLS-RSA-WITH-AES-128-CBC-SHA" \
0 \
-C "bad certificate (usage extensions)" \
-C "Processing of the Certificate handshake message failed" \
-c "Ciphersuite is TLS-"
run_test "keyUsage cli: KeyEncipherment, DHE-RSA: fail" \
"$O_SRV -key data_files/server2.key \
-cert data_files/server2.ku-ke.crt" \
"$P_CLI debug_level=1 \
force_ciphersuite=TLS-DHE-RSA-WITH-AES-128-CBC-SHA" \
1 \
-c "bad certificate (usage extensions)" \
-c "Processing of the Certificate handshake message failed" \
-C "Ciphersuite is TLS-"
run_test "keyUsage cli: KeyEncipherment, DHE-RSA: fail, soft" \
"$O_SRV -key data_files/server2.key \
-cert data_files/server2.ku-ke.crt" \
"$P_CLI debug_level=1 auth_mode=optional \
force_ciphersuite=TLS-DHE-RSA-WITH-AES-128-CBC-SHA" \
0 \
-c "bad certificate (usage extensions)" \
-C "Processing of the Certificate handshake message failed" \
-c "Ciphersuite is TLS-" \
-c "! Usage does not match the keyUsage extension"
run_test "keyUsage cli: DigitalSignature, DHE-RSA: OK" \
"$O_SRV -key data_files/server2.key \
-cert data_files/server2.ku-ds.crt" \
"$P_CLI debug_level=1 \
force_ciphersuite=TLS-DHE-RSA-WITH-AES-128-CBC-SHA" \
0 \
-C "bad certificate (usage extensions)" \
-C "Processing of the Certificate handshake message failed" \
-c "Ciphersuite is TLS-"
run_test "keyUsage cli: DigitalSignature, RSA: fail" \
"$O_SRV -key data_files/server2.key \
-cert data_files/server2.ku-ds.crt" \
"$P_CLI debug_level=1 \
force_ciphersuite=TLS-RSA-WITH-AES-128-CBC-SHA" \
1 \
-c "bad certificate (usage extensions)" \
-c "Processing of the Certificate handshake message failed" \
-C "Ciphersuite is TLS-"
run_test "keyUsage cli: DigitalSignature, RSA: fail, soft" \
"$O_SRV -key data_files/server2.key \
-cert data_files/server2.ku-ds.crt" \
"$P_CLI debug_level=1 auth_mode=optional \
force_ciphersuite=TLS-RSA-WITH-AES-128-CBC-SHA" \
0 \
-c "bad certificate (usage extensions)" \
-C "Processing of the Certificate handshake message failed" \
-c "Ciphersuite is TLS-" \
-c "! Usage does not match the keyUsage extension"
# Tests for keyUsage in leaf certificates, part 3:
# server-side checking of client cert
run_test "keyUsage cli-auth: RSA, DigitalSignature: OK" \
"$P_SRV debug_level=1 auth_mode=optional" \
"$O_CLI -key data_files/server2.key \
-cert data_files/server2.ku-ds.crt" \
0 \
-S "bad certificate (usage extensions)" \
-S "Processing of the Certificate handshake message failed"
run_test "keyUsage cli-auth: RSA, KeyEncipherment: fail (soft)" \
"$P_SRV debug_level=1 auth_mode=optional" \
"$O_CLI -key data_files/server2.key \
-cert data_files/server2.ku-ke.crt" \
0 \
-s "bad certificate (usage extensions)" \
-S "Processing of the Certificate handshake message failed"
run_test "keyUsage cli-auth: RSA, KeyEncipherment: fail (hard)" \
"$P_SRV debug_level=1 auth_mode=required" \
"$O_CLI -key data_files/server2.key \
-cert data_files/server2.ku-ke.crt" \
1 \
-s "bad certificate (usage extensions)" \
-s "Processing of the Certificate handshake message failed"
run_test "keyUsage cli-auth: ECDSA, DigitalSignature: OK" \
"$P_SRV debug_level=1 auth_mode=optional" \
"$O_CLI -key data_files/server5.key \
-cert data_files/server5.ku-ds.crt" \
0 \
-S "bad certificate (usage extensions)" \
-S "Processing of the Certificate handshake message failed"
run_test "keyUsage cli-auth: ECDSA, KeyAgreement: fail (soft)" \
"$P_SRV debug_level=1 auth_mode=optional" \
"$O_CLI -key data_files/server5.key \
-cert data_files/server5.ku-ka.crt" \
0 \
-s "bad certificate (usage extensions)" \
-S "Processing of the Certificate handshake message failed"
# Tests for extendedKeyUsage, part 1: server-side certificate/suite selection
run_test "extKeyUsage srv: serverAuth -> OK" \
"$P_SRV key_file=data_files/server5.key \
crt_file=data_files/server5.eku-srv.crt" \
"$P_CLI" \
0
run_test "extKeyUsage srv: serverAuth,clientAuth -> OK" \
"$P_SRV key_file=data_files/server5.key \
crt_file=data_files/server5.eku-srv.crt" \
"$P_CLI" \
0
run_test "extKeyUsage srv: codeSign,anyEKU -> OK" \
"$P_SRV key_file=data_files/server5.key \
crt_file=data_files/server5.eku-cs_any.crt" \
"$P_CLI" \
0
run_test "extKeyUsage srv: codeSign -> fail" \
"$P_SRV key_file=data_files/server5.key \
crt_file=data_files/server5.eku-cli.crt" \
"$P_CLI" \
1
# Tests for extendedKeyUsage, part 2: client-side checking of server cert
run_test "extKeyUsage cli: serverAuth -> OK" \
"$O_SRV -key data_files/server5.key \
-cert data_files/server5.eku-srv.crt" \
"$P_CLI debug_level=1" \
0 \
-C "bad certificate (usage extensions)" \
-C "Processing of the Certificate handshake message failed" \
-c "Ciphersuite is TLS-"
run_test "extKeyUsage cli: serverAuth,clientAuth -> OK" \
"$O_SRV -key data_files/server5.key \
-cert data_files/server5.eku-srv_cli.crt" \
"$P_CLI debug_level=1" \
0 \
-C "bad certificate (usage extensions)" \
-C "Processing of the Certificate handshake message failed" \
-c "Ciphersuite is TLS-"
run_test "extKeyUsage cli: codeSign,anyEKU -> OK" \
"$O_SRV -key data_files/server5.key \
-cert data_files/server5.eku-cs_any.crt" \
"$P_CLI debug_level=1" \
0 \
-C "bad certificate (usage extensions)" \
-C "Processing of the Certificate handshake message failed" \
-c "Ciphersuite is TLS-"
run_test "extKeyUsage cli: codeSign -> fail" \
"$O_SRV -key data_files/server5.key \
-cert data_files/server5.eku-cs.crt" \
"$P_CLI debug_level=1" \
1 \
-c "bad certificate (usage extensions)" \
-c "Processing of the Certificate handshake message failed" \
-C "Ciphersuite is TLS-"
# Tests for extendedKeyUsage, part 3: server-side checking of client cert
run_test "extKeyUsage cli-auth: clientAuth -> OK" \
"$P_SRV debug_level=1 auth_mode=optional" \
"$O_CLI -key data_files/server5.key \
-cert data_files/server5.eku-cli.crt" \
0 \
-S "bad certificate (usage extensions)" \
-S "Processing of the Certificate handshake message failed"
run_test "extKeyUsage cli-auth: serverAuth,clientAuth -> OK" \
"$P_SRV debug_level=1 auth_mode=optional" \
"$O_CLI -key data_files/server5.key \
-cert data_files/server5.eku-srv_cli.crt" \
0 \
-S "bad certificate (usage extensions)" \
-S "Processing of the Certificate handshake message failed"
run_test "extKeyUsage cli-auth: codeSign,anyEKU -> OK" \
"$P_SRV debug_level=1 auth_mode=optional" \
"$O_CLI -key data_files/server5.key \
-cert data_files/server5.eku-cs_any.crt" \
0 \
-S "bad certificate (usage extensions)" \
-S "Processing of the Certificate handshake message failed"
run_test "extKeyUsage cli-auth: codeSign -> fail (soft)" \
"$P_SRV debug_level=1 auth_mode=optional" \
"$O_CLI -key data_files/server5.key \
-cert data_files/server5.eku-cs.crt" \
0 \
-s "bad certificate (usage extensions)" \
-S "Processing of the Certificate handshake message failed"
run_test "extKeyUsage cli-auth: codeSign -> fail (hard)" \
"$P_SRV debug_level=1 auth_mode=required" \
"$O_CLI -key data_files/server5.key \
-cert data_files/server5.eku-cs.crt" \
1 \
-s "bad certificate (usage extensions)" \
-s "Processing of the Certificate handshake message failed"
# Tests for DHM parameters loading
run_test "DHM parameters: reference" \
"$P_SRV" \
"$P_CLI force_ciphersuite=TLS-DHE-RSA-WITH-AES-128-CBC-SHA \
debug_level=3" \
0 \
-c "value of 'DHM: P ' (2048 bits)" \
-c "value of 'DHM: G ' (2048 bits)"
run_test "DHM parameters: other parameters" \
"$P_SRV dhm_file=data_files/dhparams.pem" \
"$P_CLI force_ciphersuite=TLS-DHE-RSA-WITH-AES-128-CBC-SHA \
debug_level=3" \
0 \
-c "value of 'DHM: P ' (1024 bits)" \
-c "value of 'DHM: G ' (2 bits)"
# Tests for DHM client-side size checking
run_test "DHM size: server default, client default, OK" \
"$P_SRV" \
"$P_CLI force_ciphersuite=TLS-DHE-RSA-WITH-AES-128-CBC-SHA \
debug_level=1" \
0 \
-C "DHM prime too short:"
run_test "DHM size: server default, client 2048, OK" \
"$P_SRV" \
"$P_CLI force_ciphersuite=TLS-DHE-RSA-WITH-AES-128-CBC-SHA \
debug_level=1 dhmlen=2048" \
0 \
-C "DHM prime too short:"
run_test "DHM size: server 1024, client default, OK" \
"$P_SRV dhm_file=data_files/dhparams.pem" \
"$P_CLI force_ciphersuite=TLS-DHE-RSA-WITH-AES-128-CBC-SHA \
debug_level=1" \
0 \
-C "DHM prime too short:"
run_test "DHM size: server 1000, client default, rejected" \
"$P_SRV dhm_file=data_files/dh.1000.pem" \
"$P_CLI force_ciphersuite=TLS-DHE-RSA-WITH-AES-128-CBC-SHA \
debug_level=1" \
1 \
-c "DHM prime too short:"
run_test "DHM size: server default, client 2049, rejected" \
"$P_SRV" \
"$P_CLI force_ciphersuite=TLS-DHE-RSA-WITH-AES-128-CBC-SHA \
debug_level=1 dhmlen=2049" \
1 \
-c "DHM prime too short:"
# Tests for PSK callback
run_test "PSK callback: psk, no callback" \
"$P_SRV psk=abc123 psk_identity=foo" \
"$P_CLI force_ciphersuite=TLS-PSK-WITH-AES-128-CBC-SHA \
psk_identity=foo psk=abc123" \
0 \
-S "SSL - None of the common ciphersuites is usable" \
-S "SSL - Unknown identity received" \
-S "SSL - Verification of the message MAC failed"
run_test "PSK callback: no psk, no callback" \
"$P_SRV" \
"$P_CLI force_ciphersuite=TLS-PSK-WITH-AES-128-CBC-SHA \
psk_identity=foo psk=abc123" \
1 \
-s "SSL - None of the common ciphersuites is usable" \
-S "SSL - Unknown identity received" \
-S "SSL - Verification of the message MAC failed"
run_test "PSK callback: callback overrides other settings" \
"$P_SRV psk=abc123 psk_identity=foo psk_list=abc,dead,def,beef" \
"$P_CLI force_ciphersuite=TLS-PSK-WITH-AES-128-CBC-SHA \
psk_identity=foo psk=abc123" \
1 \
-S "SSL - None of the common ciphersuites is usable" \
-s "SSL - Unknown identity received" \
-S "SSL - Verification of the message MAC failed"
run_test "PSK callback: first id matches" \
"$P_SRV psk_list=abc,dead,def,beef" \
"$P_CLI force_ciphersuite=TLS-PSK-WITH-AES-128-CBC-SHA \
psk_identity=abc psk=dead" \
0 \
-S "SSL - None of the common ciphersuites is usable" \
-S "SSL - Unknown identity received" \
-S "SSL - Verification of the message MAC failed"
run_test "PSK callback: second id matches" \
"$P_SRV psk_list=abc,dead,def,beef" \
"$P_CLI force_ciphersuite=TLS-PSK-WITH-AES-128-CBC-SHA \
psk_identity=def psk=beef" \
0 \
-S "SSL - None of the common ciphersuites is usable" \
-S "SSL - Unknown identity received" \
-S "SSL - Verification of the message MAC failed"
run_test "PSK callback: no match" \
"$P_SRV psk_list=abc,dead,def,beef" \
"$P_CLI force_ciphersuite=TLS-PSK-WITH-AES-128-CBC-SHA \
psk_identity=ghi psk=beef" \
1 \
-S "SSL - None of the common ciphersuites is usable" \
-s "SSL - Unknown identity received" \
-S "SSL - Verification of the message MAC failed"
run_test "PSK callback: wrong key" \
"$P_SRV psk_list=abc,dead,def,beef" \
"$P_CLI force_ciphersuite=TLS-PSK-WITH-AES-128-CBC-SHA \
psk_identity=abc psk=beef" \
1 \
-S "SSL - None of the common ciphersuites is usable" \
-S "SSL - Unknown identity received" \
-s "SSL - Verification of the message MAC failed"
# Tests for ciphersuites per version
run_test "Per-version suites: SSL3" \
"$P_SRV min_version=ssl3 version_suites=TLS-RSA-WITH-3DES-EDE-CBC-SHA,TLS-RSA-WITH-AES-256-CBC-SHA,TLS-RSA-WITH-AES-128-CBC-SHA,TLS-RSA-WITH-AES-128-GCM-SHA256" \
"$P_CLI force_version=ssl3" \
0 \
-c "Ciphersuite is TLS-RSA-WITH-3DES-EDE-CBC-SHA"
run_test "Per-version suites: TLS 1.0" \
"$P_SRV arc4=1 version_suites=TLS-RSA-WITH-3DES-EDE-CBC-SHA,TLS-RSA-WITH-AES-256-CBC-SHA,TLS-RSA-WITH-AES-128-CBC-SHA,TLS-RSA-WITH-AES-128-GCM-SHA256" \
"$P_CLI force_version=tls1 arc4=1" \
0 \
-c "Ciphersuite is TLS-RSA-WITH-AES-256-CBC-SHA"
run_test "Per-version suites: TLS 1.1" \
"$P_SRV version_suites=TLS-RSA-WITH-3DES-EDE-CBC-SHA,TLS-RSA-WITH-AES-256-CBC-SHA,TLS-RSA-WITH-AES-128-CBC-SHA,TLS-RSA-WITH-AES-128-GCM-SHA256" \
"$P_CLI force_version=tls1_1" \
0 \
-c "Ciphersuite is TLS-RSA-WITH-AES-128-CBC-SHA"
run_test "Per-version suites: TLS 1.2" \
"$P_SRV version_suites=TLS-RSA-WITH-3DES-EDE-CBC-SHA,TLS-RSA-WITH-AES-256-CBC-SHA,TLS-RSA-WITH-AES-128-CBC-SHA,TLS-RSA-WITH-AES-128-GCM-SHA256" \
"$P_CLI force_version=tls1_2" \
0 \
-c "Ciphersuite is TLS-RSA-WITH-AES-128-GCM-SHA256"
# Test for ClientHello without extensions
requires_gnutls
run_test "ClientHello without extensions" \
"$P_SRV debug_level=3" \
"$G_CLI --priority=NORMAL:%NO_EXTENSIONS:%DISABLE_SAFE_RENEGOTIATION" \
0 \
-s "dumping 'client hello extensions' (0 bytes)"
# Tests for mbedtls_ssl_get_bytes_avail()
run_test "mbedtls_ssl_get_bytes_avail: no extra data" \
"$P_SRV" \
"$P_CLI request_size=100" \
0 \
-s "Read from client: 100 bytes read$"
run_test "mbedtls_ssl_get_bytes_avail: extra data" \
"$P_SRV" \
"$P_CLI request_size=500" \
0 \
-s "Read from client: 500 bytes read (.*+.*)"
# Tests for small packets
run_test "Small packet SSLv3 BlockCipher" \
"$P_SRV min_version=ssl3" \
"$P_CLI request_size=1 force_version=ssl3 \
force_ciphersuite=TLS-RSA-WITH-AES-256-CBC-SHA" \
0 \
-s "Read from client: 1 bytes read"
run_test "Small packet SSLv3 StreamCipher" \
"$P_SRV min_version=ssl3 arc4=1 force_ciphersuite=TLS-RSA-WITH-RC4-128-SHA" \
"$P_CLI request_size=1 force_version=ssl3 \
force_ciphersuite=TLS-RSA-WITH-RC4-128-SHA" \
0 \
-s "Read from client: 1 bytes read"
run_test "Small packet TLS 1.0 BlockCipher" \
"$P_SRV" \
"$P_CLI request_size=1 force_version=tls1 \
force_ciphersuite=TLS-RSA-WITH-AES-256-CBC-SHA" \
0 \
-s "Read from client: 1 bytes read"
run_test "Small packet TLS 1.0 BlockCipher without EtM" \
"$P_SRV" \
"$P_CLI request_size=1 force_version=tls1 etm=0 \
force_ciphersuite=TLS-RSA-WITH-AES-256-CBC-SHA" \
0 \
-s "Read from client: 1 bytes read"
run_test "Small packet TLS 1.0 BlockCipher truncated MAC" \
"$P_SRV" \
"$P_CLI request_size=1 force_version=tls1 \
force_ciphersuite=TLS-RSA-WITH-AES-256-CBC-SHA \
trunc_hmac=1" \
0 \
-s "Read from client: 1 bytes read"
run_test "Small packet TLS 1.0 StreamCipher truncated MAC" \
"$P_SRV arc4=1 force_ciphersuite=TLS-RSA-WITH-RC4-128-SHA" \
"$P_CLI request_size=1 force_version=tls1 \
force_ciphersuite=TLS-RSA-WITH-RC4-128-SHA \
trunc_hmac=1" \
0 \
-s "Read from client: 1 bytes read"
run_test "Small packet TLS 1.1 BlockCipher" \
"$P_SRV" \
"$P_CLI request_size=1 force_version=tls1_1 \
force_ciphersuite=TLS-RSA-WITH-AES-256-CBC-SHA" \
0 \
-s "Read from client: 1 bytes read"
run_test "Small packet TLS 1.1 BlockCipher without EtM" \
"$P_SRV" \
"$P_CLI request_size=1 force_version=tls1_1 etm=0 \
force_ciphersuite=TLS-RSA-WITH-AES-256-CBC-SHA" \
0 \
-s "Read from client: 1 bytes read"
run_test "Small packet TLS 1.1 StreamCipher" \
"$P_SRV arc4=1 force_ciphersuite=TLS-RSA-WITH-RC4-128-SHA" \
"$P_CLI request_size=1 force_version=tls1_1 \
force_ciphersuite=TLS-RSA-WITH-RC4-128-SHA" \
0 \
-s "Read from client: 1 bytes read"
run_test "Small packet TLS 1.1 BlockCipher truncated MAC" \
"$P_SRV" \
"$P_CLI request_size=1 force_version=tls1_1 \
force_ciphersuite=TLS-RSA-WITH-AES-256-CBC-SHA \
trunc_hmac=1" \
0 \
-s "Read from client: 1 bytes read"
run_test "Small packet TLS 1.1 StreamCipher truncated MAC" \
"$P_SRV arc4=1 force_ciphersuite=TLS-RSA-WITH-RC4-128-SHA" \
"$P_CLI request_size=1 force_version=tls1_1 \
force_ciphersuite=TLS-RSA-WITH-RC4-128-SHA \
trunc_hmac=1" \
0 \
-s "Read from client: 1 bytes read"
run_test "Small packet TLS 1.2 BlockCipher" \
"$P_SRV" \
"$P_CLI request_size=1 force_version=tls1_2 \
force_ciphersuite=TLS-RSA-WITH-AES-256-CBC-SHA" \
0 \
-s "Read from client: 1 bytes read"
run_test "Small packet TLS 1.2 BlockCipher without EtM" \
"$P_SRV" \
"$P_CLI request_size=1 force_version=tls1_2 etm=0 \
force_ciphersuite=TLS-RSA-WITH-AES-256-CBC-SHA" \
0 \
-s "Read from client: 1 bytes read"
run_test "Small packet TLS 1.2 BlockCipher larger MAC" \
"$P_SRV" \
"$P_CLI request_size=1 force_version=tls1_2 \
force_ciphersuite=TLS-ECDHE-RSA-WITH-AES-256-CBC-SHA384" \
0 \
-s "Read from client: 1 bytes read"
run_test "Small packet TLS 1.2 BlockCipher truncated MAC" \
"$P_SRV" \
"$P_CLI request_size=1 force_version=tls1_2 \
force_ciphersuite=TLS-RSA-WITH-AES-256-CBC-SHA \
trunc_hmac=1" \
0 \
-s "Read from client: 1 bytes read"
run_test "Small packet TLS 1.2 StreamCipher" \
"$P_SRV arc4=1 force_ciphersuite=TLS-RSA-WITH-RC4-128-SHA" \
"$P_CLI request_size=1 force_version=tls1_2 \
force_ciphersuite=TLS-RSA-WITH-RC4-128-SHA" \
0 \
-s "Read from client: 1 bytes read"
run_test "Small packet TLS 1.2 StreamCipher truncated MAC" \
"$P_SRV arc4=1 force_ciphersuite=TLS-RSA-WITH-RC4-128-SHA" \
"$P_CLI request_size=1 force_version=tls1_2 \
force_ciphersuite=TLS-RSA-WITH-RC4-128-SHA \
trunc_hmac=1" \
0 \
-s "Read from client: 1 bytes read"
run_test "Small packet TLS 1.2 AEAD" \
"$P_SRV" \
"$P_CLI request_size=1 force_version=tls1_2 \
force_ciphersuite=TLS-RSA-WITH-AES-256-CCM" \
0 \
-s "Read from client: 1 bytes read"
run_test "Small packet TLS 1.2 AEAD shorter tag" \
"$P_SRV" \
"$P_CLI request_size=1 force_version=tls1_2 \
force_ciphersuite=TLS-RSA-WITH-AES-256-CCM-8" \
0 \
-s "Read from client: 1 bytes read"
# Test for large packets
run_test "Large packet SSLv3 BlockCipher" \
"$P_SRV min_version=ssl3" \
"$P_CLI request_size=16384 force_version=ssl3 recsplit=0 \
force_ciphersuite=TLS-RSA-WITH-AES-256-CBC-SHA" \
0 \
-s "Read from client: 16384 bytes read"
run_test "Large packet SSLv3 StreamCipher" \
"$P_SRV min_version=ssl3 arc4=1 force_ciphersuite=TLS-RSA-WITH-RC4-128-SHA" \
"$P_CLI request_size=16384 force_version=ssl3 \
force_ciphersuite=TLS-RSA-WITH-RC4-128-SHA" \
0 \
-s "Read from client: 16384 bytes read"
run_test "Large packet TLS 1.0 BlockCipher" \
"$P_SRV" \
"$P_CLI request_size=16384 force_version=tls1 recsplit=0 \
force_ciphersuite=TLS-RSA-WITH-AES-256-CBC-SHA" \
0 \
-s "Read from client: 16384 bytes read"
run_test "Large packet TLS 1.0 BlockCipher truncated MAC" \
"$P_SRV" \
"$P_CLI request_size=16384 force_version=tls1 recsplit=0 \
force_ciphersuite=TLS-RSA-WITH-AES-256-CBC-SHA \
trunc_hmac=1" \
0 \
-s "Read from client: 16384 bytes read"
run_test "Large packet TLS 1.0 StreamCipher truncated MAC" \
"$P_SRV arc4=1 force_ciphersuite=TLS-RSA-WITH-RC4-128-SHA" \
"$P_CLI request_size=16384 force_version=tls1 \
force_ciphersuite=TLS-RSA-WITH-RC4-128-SHA \
trunc_hmac=1" \
0 \
-s "Read from client: 16384 bytes read"
run_test "Large packet TLS 1.1 BlockCipher" \
"$P_SRV" \
"$P_CLI request_size=16384 force_version=tls1_1 \
force_ciphersuite=TLS-RSA-WITH-AES-256-CBC-SHA" \
0 \
-s "Read from client: 16384 bytes read"
run_test "Large packet TLS 1.1 StreamCipher" \
"$P_SRV arc4=1 force_ciphersuite=TLS-RSA-WITH-RC4-128-SHA" \
"$P_CLI request_size=16384 force_version=tls1_1 \
force_ciphersuite=TLS-RSA-WITH-RC4-128-SHA" \
0 \
-s "Read from client: 16384 bytes read"
run_test "Large packet TLS 1.1 BlockCipher truncated MAC" \
"$P_SRV" \
"$P_CLI request_size=16384 force_version=tls1_1 \
force_ciphersuite=TLS-RSA-WITH-AES-256-CBC-SHA \
trunc_hmac=1" \
0 \
-s "Read from client: 16384 bytes read"
run_test "Large packet TLS 1.1 StreamCipher truncated MAC" \
"$P_SRV arc4=1 force_ciphersuite=TLS-RSA-WITH-RC4-128-SHA" \
"$P_CLI request_size=16384 force_version=tls1_1 \
force_ciphersuite=TLS-RSA-WITH-RC4-128-SHA \
trunc_hmac=1" \
0 \
-s "Read from client: 16384 bytes read"
run_test "Large packet TLS 1.2 BlockCipher" \
"$P_SRV" \
"$P_CLI request_size=16384 force_version=tls1_2 \
force_ciphersuite=TLS-RSA-WITH-AES-256-CBC-SHA" \
0 \
-s "Read from client: 16384 bytes read"
run_test "Large packet TLS 1.2 BlockCipher larger MAC" \
"$P_SRV" \
"$P_CLI request_size=16384 force_version=tls1_2 \
force_ciphersuite=TLS-ECDHE-RSA-WITH-AES-256-CBC-SHA384" \
0 \
-s "Read from client: 16384 bytes read"
run_test "Large packet TLS 1.2 BlockCipher truncated MAC" \
"$P_SRV" \
"$P_CLI request_size=16384 force_version=tls1_2 \
force_ciphersuite=TLS-RSA-WITH-AES-256-CBC-SHA \
trunc_hmac=1" \
0 \
-s "Read from client: 16384 bytes read"
run_test "Large packet TLS 1.2 StreamCipher" \
"$P_SRV arc4=1 force_ciphersuite=TLS-RSA-WITH-RC4-128-SHA" \
"$P_CLI request_size=16384 force_version=tls1_2 \
force_ciphersuite=TLS-RSA-WITH-RC4-128-SHA" \
0 \
-s "Read from client: 16384 bytes read"
run_test "Large packet TLS 1.2 StreamCipher truncated MAC" \
"$P_SRV arc4=1 force_ciphersuite=TLS-RSA-WITH-RC4-128-SHA" \
"$P_CLI request_size=16384 force_version=tls1_2 \
force_ciphersuite=TLS-RSA-WITH-RC4-128-SHA \
trunc_hmac=1" \
0 \
-s "Read from client: 16384 bytes read"
run_test "Large packet TLS 1.2 AEAD" \
"$P_SRV" \
"$P_CLI request_size=16384 force_version=tls1_2 \
force_ciphersuite=TLS-RSA-WITH-AES-256-CCM" \
0 \
-s "Read from client: 16384 bytes read"
run_test "Large packet TLS 1.2 AEAD shorter tag" \
"$P_SRV" \
"$P_CLI request_size=16384 force_version=tls1_2 \
force_ciphersuite=TLS-RSA-WITH-AES-256-CCM-8" \
0 \
-s "Read from client: 16384 bytes read"
# Tests for DTLS HelloVerifyRequest
run_test "DTLS cookie: enabled" \
"$P_SRV dtls=1 debug_level=2" \
"$P_CLI dtls=1 debug_level=2" \
0 \
-s "cookie verification failed" \
-s "cookie verification passed" \
-S "cookie verification skipped" \
-c "received hello verify request" \
-s "hello verification requested" \
-S "SSL - The requested feature is not available"
run_test "DTLS cookie: disabled" \
"$P_SRV dtls=1 debug_level=2 cookies=0" \
"$P_CLI dtls=1 debug_level=2" \
0 \
-S "cookie verification failed" \
-S "cookie verification passed" \
-s "cookie verification skipped" \
-C "received hello verify request" \
-S "hello verification requested" \
-S "SSL - The requested feature is not available"
run_test "DTLS cookie: default (failing)" \
"$P_SRV dtls=1 debug_level=2 cookies=-1" \
"$P_CLI dtls=1 debug_level=2 hs_timeout=100-400" \
1 \
-s "cookie verification failed" \
-S "cookie verification passed" \
-S "cookie verification skipped" \
-C "received hello verify request" \
-S "hello verification requested" \
-s "SSL - The requested feature is not available"
requires_ipv6
run_test "DTLS cookie: enabled, IPv6" \
"$P_SRV dtls=1 debug_level=2 server_addr=::1" \
"$P_CLI dtls=1 debug_level=2 server_addr=::1" \
0 \
-s "cookie verification failed" \
-s "cookie verification passed" \
-S "cookie verification skipped" \
-c "received hello verify request" \
-s "hello verification requested" \
-S "SSL - The requested feature is not available"
run_test "DTLS cookie: enabled, nbio" \
"$P_SRV dtls=1 nbio=2 debug_level=2" \
"$P_CLI dtls=1 nbio=2 debug_level=2" \
0 \
-s "cookie verification failed" \
-s "cookie verification passed" \
-S "cookie verification skipped" \
-c "received hello verify request" \
-s "hello verification requested" \
-S "SSL - The requested feature is not available"
# Tests for various cases of client authentication with DTLS
# (focused on handshake flows and message parsing)
run_test "DTLS client auth: required" \
"$P_SRV dtls=1 auth_mode=required" \
"$P_CLI dtls=1" \
0 \
-s "Verifying peer X.509 certificate... ok"
run_test "DTLS client auth: optional, client has no cert" \
"$P_SRV dtls=1 auth_mode=optional" \
"$P_CLI dtls=1 crt_file=none key_file=none" \
0 \
-s "! Certificate was missing"
run_test "DTLS client auth: none, client has no cert" \
"$P_SRV dtls=1 auth_mode=none" \
"$P_CLI dtls=1 crt_file=none key_file=none debug_level=2" \
0 \
-c "skip write certificate$" \
-s "! Certificate verification was skipped"
run_test "DTLS wrong PSK: badmac alert" \
"$P_SRV dtls=1 psk=abc123 force_ciphersuite=TLS-PSK-WITH-AES-128-GCM-SHA256" \
"$P_CLI dtls=1 psk=abc124" \
1 \
-s "SSL - Verification of the message MAC failed" \
-c "SSL - A fatal alert message was received from our peer"
# Tests for receiving fragmented handshake messages with DTLS
requires_gnutls
run_test "DTLS reassembly: no fragmentation (gnutls server)" \
"$G_SRV -u --mtu 2048 -a" \
"$P_CLI dtls=1 debug_level=2" \
0 \
-C "found fragmented DTLS handshake message" \
-C "error"
requires_gnutls
run_test "DTLS reassembly: some fragmentation (gnutls server)" \
"$G_SRV -u --mtu 512" \
"$P_CLI dtls=1 debug_level=2" \
0 \
-c "found fragmented DTLS handshake message" \
-C "error"
requires_gnutls
run_test "DTLS reassembly: more fragmentation (gnutls server)" \
"$G_SRV -u --mtu 128" \
"$P_CLI dtls=1 debug_level=2" \
0 \
-c "found fragmented DTLS handshake message" \
-C "error"
requires_gnutls
run_test "DTLS reassembly: more fragmentation, nbio (gnutls server)" \
"$G_SRV -u --mtu 128" \
"$P_CLI dtls=1 nbio=2 debug_level=2" \
0 \
-c "found fragmented DTLS handshake message" \
-C "error"
requires_gnutls
run_test "DTLS reassembly: fragmentation, renego (gnutls server)" \
"$G_SRV -u --mtu 256" \
"$P_CLI debug_level=3 dtls=1 renegotiation=1 renegotiate=1" \
0 \
-c "found fragmented DTLS handshake message" \
-c "client hello, adding renegotiation extension" \
-c "found renegotiation extension" \
-c "=> renegotiate" \
-C "mbedtls_ssl_handshake returned" \
-C "error" \
-s "Extra-header:"
requires_gnutls
run_test "DTLS reassembly: fragmentation, nbio, renego (gnutls server)" \
"$G_SRV -u --mtu 256" \
"$P_CLI debug_level=3 nbio=2 dtls=1 renegotiation=1 renegotiate=1" \
0 \
-c "found fragmented DTLS handshake message" \
-c "client hello, adding renegotiation extension" \
-c "found renegotiation extension" \
-c "=> renegotiate" \
-C "mbedtls_ssl_handshake returned" \
-C "error" \
-s "Extra-header:"
run_test "DTLS reassembly: no fragmentation (openssl server)" \
"$O_SRV -dtls1 -mtu 2048" \
"$P_CLI dtls=1 debug_level=2" \
0 \
-C "found fragmented DTLS handshake message" \
-C "error"
run_test "DTLS reassembly: some fragmentation (openssl server)" \
"$O_SRV -dtls1 -mtu 768" \
"$P_CLI dtls=1 debug_level=2" \
0 \
-c "found fragmented DTLS handshake message" \
-C "error"
run_test "DTLS reassembly: more fragmentation (openssl server)" \
"$O_SRV -dtls1 -mtu 256" \
"$P_CLI dtls=1 debug_level=2" \
0 \
-c "found fragmented DTLS handshake message" \
-C "error"
run_test "DTLS reassembly: fragmentation, nbio (openssl server)" \
"$O_SRV -dtls1 -mtu 256" \
"$P_CLI dtls=1 nbio=2 debug_level=2" \
0 \
-c "found fragmented DTLS handshake message" \
-C "error"
# Tests for specific things with "unreliable" UDP connection
not_with_valgrind # spurious resend due to timeout
run_test "DTLS proxy: reference" \
-p "$P_PXY" \
"$P_SRV dtls=1 debug_level=2" \
"$P_CLI dtls=1 debug_level=2" \
0 \
-C "replayed record" \
-S "replayed record" \
-C "record from another epoch" \
-S "record from another epoch" \
-C "discarding invalid record" \
-S "discarding invalid record" \
-S "resend" \
-s "Extra-header:" \
-c "HTTP/1.0 200 OK"
not_with_valgrind # spurious resend due to timeout
run_test "DTLS proxy: duplicate every packet" \
-p "$P_PXY duplicate=1" \
"$P_SRV dtls=1 debug_level=2" \
"$P_CLI dtls=1 debug_level=2" \
0 \
-c "replayed record" \
-s "replayed record" \
-c "discarding invalid record" \
-s "discarding invalid record" \
-S "resend" \
-s "Extra-header:" \
-c "HTTP/1.0 200 OK"
run_test "DTLS proxy: duplicate every packet, server anti-replay off" \
-p "$P_PXY duplicate=1" \
"$P_SRV dtls=1 debug_level=2 anti_replay=0" \
"$P_CLI dtls=1 debug_level=2" \
0 \
-c "replayed record" \
-S "replayed record" \
-c "discarding invalid record" \
-s "discarding invalid record" \
-c "resend" \
-s "resend" \
-s "Extra-header:" \
-c "HTTP/1.0 200 OK"
run_test "DTLS proxy: inject invalid AD record, default badmac_limit" \
-p "$P_PXY bad_ad=1" \
"$P_SRV dtls=1 debug_level=1" \
"$P_CLI dtls=1 debug_level=1 read_timeout=100" \
0 \
-c "discarding invalid record (mac)" \
-s "discarding invalid record (mac)" \
-s "Extra-header:" \
-c "HTTP/1.0 200 OK" \
-S "too many records with bad MAC" \
-S "Verification of the message MAC failed"
run_test "DTLS proxy: inject invalid AD record, badmac_limit 1" \
-p "$P_PXY bad_ad=1" \
"$P_SRV dtls=1 debug_level=1 badmac_limit=1" \
"$P_CLI dtls=1 debug_level=1 read_timeout=100" \
1 \
-C "discarding invalid record (mac)" \
-S "discarding invalid record (mac)" \
-S "Extra-header:" \
-C "HTTP/1.0 200 OK" \
-s "too many records with bad MAC" \
-s "Verification of the message MAC failed"
run_test "DTLS proxy: inject invalid AD record, badmac_limit 2" \
-p "$P_PXY bad_ad=1" \
"$P_SRV dtls=1 debug_level=1 badmac_limit=2" \
"$P_CLI dtls=1 debug_level=1 read_timeout=100" \
0 \
-c "discarding invalid record (mac)" \
-s "discarding invalid record (mac)" \
-s "Extra-header:" \
-c "HTTP/1.0 200 OK" \
-S "too many records with bad MAC" \
-S "Verification of the message MAC failed"
run_test "DTLS proxy: inject invalid AD record, badmac_limit 2, exchanges 2"\
-p "$P_PXY bad_ad=1" \
"$P_SRV dtls=1 debug_level=1 badmac_limit=2 exchanges=2" \
"$P_CLI dtls=1 debug_level=1 read_timeout=100 exchanges=2" \
1 \
-c "discarding invalid record (mac)" \
-s "discarding invalid record (mac)" \
-s "Extra-header:" \
-c "HTTP/1.0 200 OK" \
-s "too many records with bad MAC" \
-s "Verification of the message MAC failed"
run_test "DTLS proxy: delay ChangeCipherSpec" \
-p "$P_PXY delay_ccs=1" \
"$P_SRV dtls=1 debug_level=1" \
"$P_CLI dtls=1 debug_level=1" \
0 \
-c "record from another epoch" \
-s "record from another epoch" \
-c "discarding invalid record" \
-s "discarding invalid record" \
-s "Extra-header:" \
-c "HTTP/1.0 200 OK"
# Tests for "randomly unreliable connection": try a variety of flows and peers
needs_more_time 2
run_test "DTLS proxy: 3d (drop, delay, duplicate), \"short\" PSK handshake" \
-p "$P_PXY drop=5 delay=5 duplicate=5" \
"$P_SRV dtls=1 hs_timeout=250-10000 tickets=0 auth_mode=none \
psk=abc123" \
"$P_CLI dtls=1 hs_timeout=250-10000 tickets=0 psk=abc123 \
force_ciphersuite=TLS-PSK-WITH-AES-128-CCM-8" \
0 \
-s "Extra-header:" \
-c "HTTP/1.0 200 OK"
needs_more_time 2
run_test "DTLS proxy: 3d, \"short\" RSA handshake" \
-p "$P_PXY drop=5 delay=5 duplicate=5" \
"$P_SRV dtls=1 hs_timeout=250-10000 tickets=0 auth_mode=none" \
"$P_CLI dtls=1 hs_timeout=250-10000 tickets=0 \
force_ciphersuite=TLS-RSA-WITH-AES-128-CBC-SHA" \
0 \
-s "Extra-header:" \
-c "HTTP/1.0 200 OK"
needs_more_time 2
run_test "DTLS proxy: 3d, \"short\" (no ticket, no cli_auth) FS handshake" \
-p "$P_PXY drop=5 delay=5 duplicate=5" \
"$P_SRV dtls=1 hs_timeout=250-10000 tickets=0 auth_mode=none" \
"$P_CLI dtls=1 hs_timeout=250-10000 tickets=0" \
0 \
-s "Extra-header:" \
-c "HTTP/1.0 200 OK"
needs_more_time 2
run_test "DTLS proxy: 3d, FS, client auth" \
-p "$P_PXY drop=5 delay=5 duplicate=5" \
"$P_SRV dtls=1 hs_timeout=250-10000 tickets=0 auth_mode=required" \
"$P_CLI dtls=1 hs_timeout=250-10000 tickets=0" \
0 \
-s "Extra-header:" \
-c "HTTP/1.0 200 OK"
needs_more_time 2
run_test "DTLS proxy: 3d, FS, ticket" \
-p "$P_PXY drop=5 delay=5 duplicate=5" \
"$P_SRV dtls=1 hs_timeout=250-10000 tickets=1 auth_mode=none" \
"$P_CLI dtls=1 hs_timeout=250-10000 tickets=1" \
0 \
-s "Extra-header:" \
-c "HTTP/1.0 200 OK"
needs_more_time 2
run_test "DTLS proxy: 3d, max handshake (FS, ticket + client auth)" \
-p "$P_PXY drop=5 delay=5 duplicate=5" \
"$P_SRV dtls=1 hs_timeout=250-10000 tickets=1 auth_mode=required" \
"$P_CLI dtls=1 hs_timeout=250-10000 tickets=1" \
0 \
-s "Extra-header:" \
-c "HTTP/1.0 200 OK"
needs_more_time 2
run_test "DTLS proxy: 3d, max handshake, nbio" \
-p "$P_PXY drop=5 delay=5 duplicate=5" \
"$P_SRV dtls=1 hs_timeout=250-10000 nbio=2 tickets=1 \
auth_mode=required" \
"$P_CLI dtls=1 hs_timeout=250-10000 nbio=2 tickets=1" \
0 \
-s "Extra-header:" \
-c "HTTP/1.0 200 OK"
needs_more_time 4
run_test "DTLS proxy: 3d, min handshake, resumption" \
-p "$P_PXY drop=5 delay=5 duplicate=5" \
"$P_SRV dtls=1 hs_timeout=250-10000 tickets=0 auth_mode=none \
psk=abc123 debug_level=3" \
"$P_CLI dtls=1 hs_timeout=250-10000 tickets=0 psk=abc123 \
debug_level=3 reconnect=1 read_timeout=1000 max_resend=10 \
force_ciphersuite=TLS-PSK-WITH-AES-128-CCM-8" \
0 \
-s "a session has been resumed" \
-c "a session has been resumed" \
-s "Extra-header:" \
-c "HTTP/1.0 200 OK"
needs_more_time 4
run_test "DTLS proxy: 3d, min handshake, resumption, nbio" \
-p "$P_PXY drop=5 delay=5 duplicate=5" \
"$P_SRV dtls=1 hs_timeout=250-10000 tickets=0 auth_mode=none \
psk=abc123 debug_level=3 nbio=2" \
"$P_CLI dtls=1 hs_timeout=250-10000 tickets=0 psk=abc123 \
debug_level=3 reconnect=1 read_timeout=1000 max_resend=10 \
force_ciphersuite=TLS-PSK-WITH-AES-128-CCM-8 nbio=2" \
0 \
-s "a session has been resumed" \
-c "a session has been resumed" \
-s "Extra-header:" \
-c "HTTP/1.0 200 OK"
needs_more_time 4
run_test "DTLS proxy: 3d, min handshake, client-initiated renego" \
-p "$P_PXY drop=5 delay=5 duplicate=5" \
"$P_SRV dtls=1 hs_timeout=250-10000 tickets=0 auth_mode=none \
psk=abc123 renegotiation=1 debug_level=2" \
"$P_CLI dtls=1 hs_timeout=250-10000 tickets=0 psk=abc123 \
renegotiate=1 debug_level=2 \
force_ciphersuite=TLS-PSK-WITH-AES-128-CCM-8" \
0 \
-c "=> renegotiate" \
-s "=> renegotiate" \
-s "Extra-header:" \
-c "HTTP/1.0 200 OK"
needs_more_time 4
run_test "DTLS proxy: 3d, min handshake, client-initiated renego, nbio" \
-p "$P_PXY drop=5 delay=5 duplicate=5" \
"$P_SRV dtls=1 hs_timeout=250-10000 tickets=0 auth_mode=none \
psk=abc123 renegotiation=1 debug_level=2" \
"$P_CLI dtls=1 hs_timeout=250-10000 tickets=0 psk=abc123 \
renegotiate=1 debug_level=2 \
force_ciphersuite=TLS-PSK-WITH-AES-128-CCM-8" \
0 \
-c "=> renegotiate" \
-s "=> renegotiate" \
-s "Extra-header:" \
-c "HTTP/1.0 200 OK"
needs_more_time 4
run_test "DTLS proxy: 3d, min handshake, server-initiated renego" \
-p "$P_PXY drop=5 delay=5 duplicate=5" \
"$P_SRV dtls=1 hs_timeout=250-10000 tickets=0 auth_mode=none \
psk=abc123 renegotiate=1 renegotiation=1 exchanges=4 \
debug_level=2" \
"$P_CLI dtls=1 hs_timeout=250-10000 tickets=0 psk=abc123 \
renegotiation=1 exchanges=4 debug_level=2 \
force_ciphersuite=TLS-PSK-WITH-AES-128-CCM-8" \
0 \
-c "=> renegotiate" \
-s "=> renegotiate" \
-s "Extra-header:" \
-c "HTTP/1.0 200 OK"
needs_more_time 4
run_test "DTLS proxy: 3d, min handshake, server-initiated renego, nbio" \
-p "$P_PXY drop=5 delay=5 duplicate=5" \
"$P_SRV dtls=1 hs_timeout=250-10000 tickets=0 auth_mode=none \
psk=abc123 renegotiate=1 renegotiation=1 exchanges=4 \
debug_level=2 nbio=2" \
"$P_CLI dtls=1 hs_timeout=250-10000 tickets=0 psk=abc123 \
renegotiation=1 exchanges=4 debug_level=2 nbio=2 \
force_ciphersuite=TLS-PSK-WITH-AES-128-CCM-8" \
0 \
-c "=> renegotiate" \
-s "=> renegotiate" \
-s "Extra-header:" \
-c "HTTP/1.0 200 OK"
needs_more_time 6
run_test "DTLS proxy: 3d, openssl server" \
-p "$P_PXY drop=5 delay=5 duplicate=5 protect_hvr=1" \
"$O_SRV -dtls1 -mtu 2048" \
"$P_CLI dtls=1 hs_timeout=250-60000 tickets=0" \
0 \
-c "HTTP/1.0 200 OK"
needs_more_time 8
run_test "DTLS proxy: 3d, openssl server, fragmentation" \
-p "$P_PXY drop=5 delay=5 duplicate=5 protect_hvr=1" \
"$O_SRV -dtls1 -mtu 768" \
"$P_CLI dtls=1 hs_timeout=250-60000 tickets=0" \
0 \
-c "HTTP/1.0 200 OK"
needs_more_time 8
run_test "DTLS proxy: 3d, openssl server, fragmentation, nbio" \
-p "$P_PXY drop=5 delay=5 duplicate=5 protect_hvr=1" \
"$O_SRV -dtls1 -mtu 768" \
"$P_CLI dtls=1 hs_timeout=250-60000 nbio=2 tickets=0" \
0 \
-c "HTTP/1.0 200 OK"
requires_gnutls
needs_more_time 6
run_test "DTLS proxy: 3d, gnutls server" \
-p "$P_PXY drop=5 delay=5 duplicate=5" \
"$G_SRV -u --mtu 2048 -a" \
"$P_CLI dtls=1 hs_timeout=250-60000" \
0 \
-s "Extra-header:" \
-c "Extra-header:"
requires_gnutls
needs_more_time 8
run_test "DTLS proxy: 3d, gnutls server, fragmentation" \
-p "$P_PXY drop=5 delay=5 duplicate=5" \
"$G_SRV -u --mtu 512" \
"$P_CLI dtls=1 hs_timeout=250-60000" \
0 \
-s "Extra-header:" \
-c "Extra-header:"
requires_gnutls
needs_more_time 8
run_test "DTLS proxy: 3d, gnutls server, fragmentation, nbio" \
-p "$P_PXY drop=5 delay=5 duplicate=5" \
"$G_SRV -u --mtu 512" \
"$P_CLI dtls=1 hs_timeout=250-60000 nbio=2" \
0 \
-s "Extra-header:" \
-c "Extra-header:"
# Final report
echo "------------------------------------------------------------------------"
if [ $FAILS = 0 ]; then
printf "PASSED"
else
printf "FAILED"
fi
PASSES=$(( $TESTS - $FAILS ))
echo " ($PASSES / $TESTS tests ($SKIPS skipped))"
exit $FAILS
Reference in New Issue View Git Blame Copy Permalink