AuroraMiddleware/mbedtls
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
9752aadd85
mbedtls/library/ssl_misc.h
Hanno Becker 9752aadd85 Make query API for state of MFL extension internal 
This commit makes the API

- mbedtls_ssl_get_output_max_frag_len()
- mbedtls_ssl_get_input_max_frag_len()
- mbedtls_ssl_get__max_frag_len()

for querying the state of the Maximum Fragment Length
extension internal.

Rationale: The value those APIs provide to the user is in
upper bounds for the size of incoming and outgoing records,
which can be used to size application data buffers apporpriately
before passing them to mbedtls_ssl_{read,write}(). However,
there are other factors which influence such upper bounds,
such as the MTU or other extensions (specifically, the
record_size_limit extension which is still to be implemented)
which should be taken into account.

There should be more general APIs for querying the maximum
size of incoming and outgoing records.

For the maximum size of outgoing records, we already have such,
namely mbedtls_ssl_get_max_out_record_payload().

For the maximum size of incoming records, a new API will be
added in a subsequent commit.

Signed-off-by: Hanno Becker <hanno.becker@arm.com>
2021-05-23 06:03:55 +01:00

1311 lines
52 KiB
C
Raw Blame History

/**
* \file ssl_misc.h
*
* \brief Internal functions shared by the SSL modules
*/
/*
* Copyright The Mbed TLS Contributors
* SPDX-License-Identifier: Apache-2.0
*
* Licensed under the Apache License, Version 2.0 (the "License"); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#ifndef MBEDTLS_SSL_MISC_H
#define MBEDTLS_SSL_MISC_H
#if !defined(MBEDTLS_CONFIG_FILE)
#include "mbedtls/config.h"
#else
#include MBEDTLS_CONFIG_FILE
#endif
#include "mbedtls/ssl.h"
#include "mbedtls/cipher.h"
#if defined(MBEDTLS_USE_PSA_CRYPTO)
#include "psa/crypto.h"
#endif
#if defined(MBEDTLS_MD5_C)
#include "mbedtls/md5.h"
#endif
#if defined(MBEDTLS_SHA1_C)
#include "mbedtls/sha1.h"
#endif
#if defined(MBEDTLS_SHA256_C)
#include "mbedtls/sha256.h"
#endif
#if defined(MBEDTLS_SHA512_C)
#include "mbedtls/sha512.h"
#endif
#if defined(MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED)
#include "mbedtls/ecjpake.h"
#endif
#if defined(MBEDTLS_USE_PSA_CRYPTO)
#include "psa/crypto.h"
#include "mbedtls/psa_util.h"
#endif /* MBEDTLS_USE_PSA_CRYPTO */
#if ( defined(__ARMCC_VERSION) || defined(_MSC_VER) ) && \
!defined(inline) && !defined(__cplusplus)
#define inline __inline
#endif
/* Determine minimum supported version */
#define MBEDTLS_SSL_MIN_MAJOR_VERSION MBEDTLS_SSL_MAJOR_VERSION_3
#if defined(MBEDTLS_SSL_PROTO_TLS1)
#define MBEDTLS_SSL_MIN_MINOR_VERSION MBEDTLS_SSL_MINOR_VERSION_1
#else
#if defined(MBEDTLS_SSL_PROTO_TLS1_1)
#define MBEDTLS_SSL_MIN_MINOR_VERSION MBEDTLS_SSL_MINOR_VERSION_2
#else
#if defined(MBEDTLS_SSL_PROTO_TLS1_2)
#define MBEDTLS_SSL_MIN_MINOR_VERSION MBEDTLS_SSL_MINOR_VERSION_3
#endif /* MBEDTLS_SSL_PROTO_TLS1_2 */
#endif /* MBEDTLS_SSL_PROTO_TLS1_1 */
#endif /* MBEDTLS_SSL_PROTO_TLS1 */
#define MBEDTLS_SSL_MIN_VALID_MINOR_VERSION MBEDTLS_SSL_MINOR_VERSION_1
#define MBEDTLS_SSL_MIN_VALID_MAJOR_VERSION MBEDTLS_SSL_MAJOR_VERSION_3
/* Determine maximum supported version */
#define MBEDTLS_SSL_MAX_MAJOR_VERSION MBEDTLS_SSL_MAJOR_VERSION_3
#if defined(MBEDTLS_SSL_PROTO_TLS1_2)
#define MBEDTLS_SSL_MAX_MINOR_VERSION MBEDTLS_SSL_MINOR_VERSION_3
#else
#if defined(MBEDTLS_SSL_PROTO_TLS1_1)
#define MBEDTLS_SSL_MAX_MINOR_VERSION MBEDTLS_SSL_MINOR_VERSION_2
#else
#if defined(MBEDTLS_SSL_PROTO_TLS1)
#define MBEDTLS_SSL_MAX_MINOR_VERSION MBEDTLS_SSL_MINOR_VERSION_1
#else
#endif /* MBEDTLS_SSL_PROTO_TLS1 */
#endif /* MBEDTLS_SSL_PROTO_TLS1_1 */
#endif /* MBEDTLS_SSL_PROTO_TLS1_2 */
/* Shorthand for restartable ECC */
#if defined(MBEDTLS_ECP_RESTARTABLE) && \
defined(MBEDTLS_SSL_CLI_C) && \
defined(MBEDTLS_SSL_PROTO_TLS1_2) && \
defined(MBEDTLS_KEY_EXCHANGE_ECDHE_ECDSA_ENABLED)
#define MBEDTLS_SSL_ECP_RESTARTABLE_ENABLED
#endif
#define MBEDTLS_SSL_INITIAL_HANDSHAKE 0
#define MBEDTLS_SSL_RENEGOTIATION_IN_PROGRESS 1 /* In progress */
#define MBEDTLS_SSL_RENEGOTIATION_DONE 2 /* Done or aborted */
#define MBEDTLS_SSL_RENEGOTIATION_PENDING 3 /* Requested (server only) */
/*
* DTLS retransmission states, see RFC 6347 4.2.4
*
* The SENDING state is merged in PREPARING for initial sends,
* but is distinct for resends.
*
* Note: initial state is wrong for server, but is not used anyway.
*/
#define MBEDTLS_SSL_RETRANS_PREPARING 0
#define MBEDTLS_SSL_RETRANS_SENDING 1
#define MBEDTLS_SSL_RETRANS_WAITING 2
#define MBEDTLS_SSL_RETRANS_FINISHED 3
/*
* Allow extra bytes for record, authentication and encryption overhead:
* counter (8) + header (5) + IV(16) + MAC (16-48) + padding (0-256).
*/
#if defined(MBEDTLS_SSL_PROTO_TLS1) || \
defined(MBEDTLS_SSL_PROTO_TLS1_1) || \
defined(MBEDTLS_SSL_PROTO_TLS1_2)
#define MBEDTLS_SSL_PROTO_TLS1_2_OR_EARLIER
#endif
#if defined(MBEDTLS_SSL_PROTO_TLS1_2_OR_EARLIER)
/* This macro determines whether CBC is supported. */
#if defined(MBEDTLS_CIPHER_MODE_CBC) && \
( defined(MBEDTLS_AES_C) || \
defined(MBEDTLS_CAMELLIA_C) || \
defined(MBEDTLS_ARIA_C) || \
defined(MBEDTLS_DES_C) )
#define MBEDTLS_SSL_SOME_SUITES_USE_CBC
#endif
/* This macro determines whether a ciphersuite using a
* stream cipher can be used. */
#if defined(MBEDTLS_CIPHER_NULL_CIPHER)
#define MBEDTLS_SSL_SOME_SUITES_USE_STREAM
#endif
/* This macro determines whether the CBC construct used in TLS 1.0-1.2 is supported. */
#if defined(MBEDTLS_SSL_SOME_SUITES_USE_CBC) && \
( defined(MBEDTLS_SSL_PROTO_TLS1) || \
defined(MBEDTLS_SSL_PROTO_TLS1_1) || \
defined(MBEDTLS_SSL_PROTO_TLS1_2) )
#define MBEDTLS_SSL_SOME_SUITES_USE_TLS_CBC
#endif
#if defined(MBEDTLS_SSL_SOME_SUITES_USE_STREAM) || \
defined(MBEDTLS_SSL_SOME_SUITES_USE_CBC)
#define MBEDTLS_SSL_SOME_SUITES_USE_MAC
#endif
#endif /* MBEDTLS_SSL_PROTO_TLS1_2_OR_EARLIER */
#if defined(MBEDTLS_SSL_SOME_SUITES_USE_MAC)
/* Ciphersuites using HMAC */
#if defined(MBEDTLS_SHA384_C)
#define MBEDTLS_SSL_MAC_ADD 48 /* SHA-384 used for HMAC */
#elif defined(MBEDTLS_SHA256_C)
#define MBEDTLS_SSL_MAC_ADD 32 /* SHA-256 used for HMAC */
#else
#define MBEDTLS_SSL_MAC_ADD 20 /* SHA-1 used for HMAC */
#endif
#else /* MBEDTLS_SSL_SOME_SUITES_USE_MAC */
/* AEAD ciphersuites: GCM and CCM use a 128 bits tag */
#define MBEDTLS_SSL_MAC_ADD 16
#endif
#if defined(MBEDTLS_CIPHER_MODE_CBC)
#define MBEDTLS_SSL_PADDING_ADD 256
#else
#define MBEDTLS_SSL_PADDING_ADD 0
#endif
#if defined(MBEDTLS_SSL_DTLS_CONNECTION_ID)
#define MBEDTLS_SSL_MAX_CID_EXPANSION MBEDTLS_SSL_CID_PADDING_GRANULARITY
#else
#define MBEDTLS_SSL_MAX_CID_EXPANSION 0
#endif
#define MBEDTLS_SSL_PAYLOAD_OVERHEAD ( MBEDTLS_MAX_IV_LENGTH + \
MBEDTLS_SSL_MAC_ADD + \
MBEDTLS_SSL_PADDING_ADD + \
MBEDTLS_SSL_MAX_CID_EXPANSION \
)
#define MBEDTLS_SSL_IN_PAYLOAD_LEN ( MBEDTLS_SSL_PAYLOAD_OVERHEAD + \
( MBEDTLS_SSL_IN_CONTENT_LEN ) )
#define MBEDTLS_SSL_OUT_PAYLOAD_LEN ( MBEDTLS_SSL_PAYLOAD_OVERHEAD + \
( MBEDTLS_SSL_OUT_CONTENT_LEN ) )
/* The maximum number of buffered handshake messages. */
#define MBEDTLS_SSL_MAX_BUFFERED_HS 4
/* Maximum length we can advertise as our max content length for
RFC 6066 max_fragment_length extension negotiation purposes
(the lesser of both sizes, if they are unequal.)
*/
#define MBEDTLS_TLS_EXT_ADV_CONTENT_LEN ( \
(MBEDTLS_SSL_IN_CONTENT_LEN > MBEDTLS_SSL_OUT_CONTENT_LEN) \
? ( MBEDTLS_SSL_OUT_CONTENT_LEN ) \
: ( MBEDTLS_SSL_IN_CONTENT_LEN ) \
)
/* Maximum size in bytes of list in sig-hash algorithm ext., RFC 5246 */
#define MBEDTLS_SSL_MAX_SIG_HASH_ALG_LIST_LEN 65534
/* Maximum size in bytes of list in supported elliptic curve ext., RFC 4492 */
#define MBEDTLS_SSL_MAX_CURVE_LIST_LEN 65535
/*
* Check that we obey the standard's message size bounds
*/
#if MBEDTLS_SSL_IN_CONTENT_LEN > 16384
#error "Bad configuration - incoming record content too large."
#endif
#if MBEDTLS_SSL_OUT_CONTENT_LEN > 16384
#error "Bad configuration - outgoing record content too large."
#endif
#if MBEDTLS_SSL_IN_PAYLOAD_LEN > MBEDTLS_SSL_IN_CONTENT_LEN + 2048
#error "Bad configuration - incoming protected record payload too large."
#endif
#if MBEDTLS_SSL_OUT_PAYLOAD_LEN > MBEDTLS_SSL_OUT_CONTENT_LEN + 2048
#error "Bad configuration - outgoing protected record payload too large."
#endif
/* Calculate buffer sizes */
/* Note: Even though the TLS record header is only 5 bytes
long, we're internally using 8 bytes to store the
implicit sequence number. */
#define MBEDTLS_SSL_HEADER_LEN 13
#if !defined(MBEDTLS_SSL_DTLS_CONNECTION_ID)
#define MBEDTLS_SSL_IN_BUFFER_LEN \
( ( MBEDTLS_SSL_HEADER_LEN ) + ( MBEDTLS_SSL_IN_PAYLOAD_LEN ) )
#else
#define MBEDTLS_SSL_IN_BUFFER_LEN \
( ( MBEDTLS_SSL_HEADER_LEN ) + ( MBEDTLS_SSL_IN_PAYLOAD_LEN ) \
+ ( MBEDTLS_SSL_CID_IN_LEN_MAX ) )
#endif
#if !defined(MBEDTLS_SSL_DTLS_CONNECTION_ID)
#define MBEDTLS_SSL_OUT_BUFFER_LEN \
( ( MBEDTLS_SSL_HEADER_LEN ) + ( MBEDTLS_SSL_OUT_PAYLOAD_LEN ) )
#else
#define MBEDTLS_SSL_OUT_BUFFER_LEN \
( ( MBEDTLS_SSL_HEADER_LEN ) + ( MBEDTLS_SSL_OUT_PAYLOAD_LEN ) \
+ ( MBEDTLS_SSL_CID_OUT_LEN_MAX ) )
#endif
#if defined(MBEDTLS_SSL_MAX_FRAGMENT_LENGTH)
/**
* \brief Return the maximum fragment length (payload, in bytes) for
* the output buffer. For the client, this is the configured
* value. For the server, it is the minimum of two - the
* configured value and the negotiated one.
*
* \sa mbedtls_ssl_conf_max_frag_len()
* \sa mbedtls_ssl_get_max_out_record_payload()
*
* \param ssl SSL context
*
* \return Current maximum fragment length for the output buffer.
*/
size_t mbedtls_ssl_get_output_max_frag_len( const mbedtls_ssl_context *ssl );
/**
* \brief Return the maximum fragment length (payload, in bytes) for
* the input buffer. This is the negotiated maximum fragment
* length, or, if there is none, MBEDTLS_SSL_MAX_CONTENT_LEN.
* If it is not defined either, the value is 2^14. This function
* works as its predecessor, \c mbedtls_ssl_get_max_frag_len().
*
* \sa mbedtls_ssl_conf_max_frag_len()
* \sa mbedtls_ssl_get_max_in_record_payload()
*
* \param ssl SSL context
*
* \return Current maximum fragment length for the output buffer.
*/
size_t mbedtls_ssl_get_input_max_frag_len( const mbedtls_ssl_context *ssl );
#endif /* MBEDTLS_SSL_MAX_FRAGMENT_LENGTH */
#if defined(MBEDTLS_SSL_VARIABLE_BUFFER_LENGTH)
static inline size_t mbedtls_ssl_get_output_buflen( const mbedtls_ssl_context *ctx )
{
#if defined (MBEDTLS_SSL_DTLS_CONNECTION_ID)
return mbedtls_ssl_get_output_max_frag_len( ctx )
+ MBEDTLS_SSL_HEADER_LEN + MBEDTLS_SSL_PAYLOAD_OVERHEAD
+ MBEDTLS_SSL_CID_OUT_LEN_MAX;
#else
return mbedtls_ssl_get_output_max_frag_len( ctx )
+ MBEDTLS_SSL_HEADER_LEN + MBEDTLS_SSL_PAYLOAD_OVERHEAD;
#endif
}
static inline size_t mbedtls_ssl_get_input_buflen( const mbedtls_ssl_context *ctx )
{
#if defined (MBEDTLS_SSL_DTLS_CONNECTION_ID)
return mbedtls_ssl_get_input_max_frag_len( ctx )
+ MBEDTLS_SSL_HEADER_LEN + MBEDTLS_SSL_PAYLOAD_OVERHEAD
+ MBEDTLS_SSL_CID_IN_LEN_MAX;
#else
return mbedtls_ssl_get_input_max_frag_len( ctx )
+ MBEDTLS_SSL_HEADER_LEN + MBEDTLS_SSL_PAYLOAD_OVERHEAD;
#endif
}
#endif
/*
* TLS extension flags (for extensions with outgoing ServerHello content
* that need it (e.g. for RENEGOTIATION_INFO the server already knows because
* of state of the renegotiation flag, so no indicator is required)
*/
#define MBEDTLS_TLS_EXT_SUPPORTED_POINT_FORMATS_PRESENT (1 << 0)
#define MBEDTLS_TLS_EXT_ECJPAKE_KKPP_OK (1 << 1)
/**
* \brief This function checks if the remaining size in a buffer is
* greater or equal than a needed space.
*
* \param cur Pointer to the current position in the buffer.
* \param end Pointer to one past the end of the buffer.
* \param need Needed space in bytes.
*
* \return Zero if the needed space is available in the buffer, non-zero
* otherwise.
*/
static inline int mbedtls_ssl_chk_buf_ptr( const uint8_t *cur,
const uint8_t *end, size_t need )
{
return( ( cur > end ) || ( need > (size_t)( end - cur ) ) );
}
/**
* \brief This macro checks if the remaining size in a buffer is
* greater or equal than a needed space. If it is not the case,
* it returns an SSL_BUFFER_TOO_SMALL error.
*
* \param cur Pointer to the current position in the buffer.
* \param end Pointer to one past the end of the buffer.
* \param need Needed space in bytes.
*
*/
#define MBEDTLS_SSL_CHK_BUF_PTR( cur, end, need ) \
do { \
if( mbedtls_ssl_chk_buf_ptr( ( cur ), ( end ), ( need ) ) != 0 ) \
{ \
return( MBEDTLS_ERR_SSL_BUFFER_TOO_SMALL ); \
} \
} while( 0 )
#ifdef __cplusplus
extern "C" {
#endif
#if defined(MBEDTLS_SSL_PROTO_TLS1_2) && \
defined(MBEDTLS_KEY_EXCHANGE_WITH_CERT_ENABLED)
/*
* Abstraction for a grid of allowed signature-hash-algorithm pairs.
*/
struct mbedtls_ssl_sig_hash_set_t
{
/* At the moment, we only need to remember a single suitable
* hash algorithm per signature algorithm. As long as that's
* the case - and we don't need a general lookup function -
* we can implement the sig-hash-set as a map from signatures
* to hash algorithms. */
mbedtls_md_type_t rsa;
mbedtls_md_type_t ecdsa;
};
#endif /* MBEDTLS_SSL_PROTO_TLS1_2 &&
MBEDTLS_KEY_EXCHANGE_WITH_CERT_ENABLED */
typedef int mbedtls_ssl_tls_prf_cb( const unsigned char *secret, size_t slen,
const char *label,
const unsigned char *random, size_t rlen,
unsigned char *dstbuf, size_t dlen );
/* cipher.h exports the maximum IV, key and block length from
* all ciphers enabled in the config, regardless of whether those
* ciphers are actually usable in SSL/TLS. Notably, XTS is enabled
* in the default configuration and uses 64 Byte keys, but it is
* not used for record protection in SSL/TLS.
*
* In order to prevent unnecessary inflation of key structures,
* we introduce SSL-specific variants of the max-{key,block,IV}
* macros here which are meant to only take those ciphers into
* account which can be negotiated in SSL/TLS.
*
* Since the current definitions of MBEDTLS_MAX_{KEY|BLOCK|IV}_LENGTH
* in cipher.h are rough overapproximations of the real maxima, here
* we content ourselves with replicating those overapproximations
* for the maximum block and IV length, and excluding XTS from the
* computation of the maximum key length. */
#define MBEDTLS_SSL_MAX_BLOCK_LENGTH 16
#define MBEDTLS_SSL_MAX_IV_LENGTH 16
#define MBEDTLS_SSL_MAX_KEY_LENGTH 32
/**
* \brief The data structure holding the cryptographic material (key and IV)
* used for record protection in TLS 1.3.
*/
struct mbedtls_ssl_key_set
{
/*! The key for client->server records. */
unsigned char client_write_key[ MBEDTLS_SSL_MAX_KEY_LENGTH ];
/*! The key for server->client records. */
unsigned char server_write_key[ MBEDTLS_SSL_MAX_KEY_LENGTH ];
/*! The IV for client->server records. */
unsigned char client_write_iv[ MBEDTLS_SSL_MAX_IV_LENGTH ];
/*! The IV for server->client records. */
unsigned char server_write_iv[ MBEDTLS_SSL_MAX_IV_LENGTH ];
size_t key_len; /*!< The length of client_write_key and
* server_write_key, in Bytes. */
size_t iv_len; /*!< The length of client_write_iv and
* server_write_iv, in Bytes. */
};
typedef struct mbedtls_ssl_key_set mbedtls_ssl_key_set;
/*
* This structure contains the parameters only needed during handshake.
*/
struct mbedtls_ssl_handshake_params
{
/*
* Handshake specific crypto variables
*/
#if defined(MBEDTLS_SSL_PROTO_TLS1_2) && \
defined(MBEDTLS_KEY_EXCHANGE_WITH_CERT_ENABLED)
mbedtls_ssl_sig_hash_set_t hash_algs; /*!< Set of suitable sig-hash pairs */
#endif
#if defined(MBEDTLS_DHM_C)
mbedtls_dhm_context dhm_ctx; /*!< DHM key exchange */
#endif
/* Adding guard for MBEDTLS_ECDSA_C to ensure no compile errors due
* to guards also being in ssl_srv.c and ssl_cli.c. There is a gap
* in functionality that access to ecdh_ctx structure is needed for
* MBEDTLS_ECDSA_C which does not seem correct.
*/
#if defined(MBEDTLS_ECDH_C) || defined(MBEDTLS_ECDSA_C)
mbedtls_ecdh_context ecdh_ctx; /*!< ECDH key exchange */
#if defined(MBEDTLS_USE_PSA_CRYPTO)
psa_key_type_t ecdh_psa_type;
uint16_t ecdh_bits;
psa_key_id_t ecdh_psa_privkey;
unsigned char ecdh_psa_peerkey[MBEDTLS_PSA_MAX_EC_PUBKEY_LENGTH];
size_t ecdh_psa_peerkey_len;
#endif /* MBEDTLS_USE_PSA_CRYPTO */
#endif /* MBEDTLS_ECDH_C || MBEDTLS_ECDSA_C */
#if defined(MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED)
mbedtls_ecjpake_context ecjpake_ctx; /*!< EC J-PAKE key exchange */
#if defined(MBEDTLS_SSL_CLI_C)
unsigned char *ecjpake_cache; /*!< Cache for ClientHello ext */
size_t ecjpake_cache_len; /*!< Length of cached data */
#endif
#endif /* MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED */
#if defined(MBEDTLS_ECDH_C) || defined(MBEDTLS_ECDSA_C) || \
defined(MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED)
const mbedtls_ecp_curve_info **curves; /*!< Supported elliptic curves */
#endif
#if defined(MBEDTLS_KEY_EXCHANGE_SOME_PSK_ENABLED)
#if defined(MBEDTLS_USE_PSA_CRYPTO)
psa_key_id_t psk_opaque; /*!< Opaque PSK from the callback */
#endif /* MBEDTLS_USE_PSA_CRYPTO */
unsigned char *psk; /*!< PSK from the callback */
size_t psk_len; /*!< Length of PSK from callback */
#endif /* MBEDTLS_KEY_EXCHANGE_SOME_PSK_ENABLED */
#if defined(MBEDTLS_X509_CRT_PARSE_C)
mbedtls_ssl_key_cert *key_cert; /*!< chosen key/cert pair (server) */
#if defined(MBEDTLS_SSL_SERVER_NAME_INDICATION)
int sni_authmode; /*!< authmode from SNI callback */
mbedtls_ssl_key_cert *sni_key_cert; /*!< key/cert list from SNI */
mbedtls_x509_crt *sni_ca_chain; /*!< trusted CAs from SNI callback */
mbedtls_x509_crl *sni_ca_crl; /*!< trusted CAs CRLs from SNI */
#endif /* MBEDTLS_SSL_SERVER_NAME_INDICATION */
#endif /* MBEDTLS_X509_CRT_PARSE_C */
#if defined(MBEDTLS_SSL_ECP_RESTARTABLE_ENABLED)
int ecrs_enabled; /*!< Handshake supports EC restart? */
mbedtls_x509_crt_restart_ctx ecrs_ctx; /*!< restart context */
enum { /* this complements ssl->state with info on intra-state operations */
ssl_ecrs_none = 0, /*!< nothing going on (yet) */
ssl_ecrs_crt_verify, /*!< Certificate: crt_verify() */
ssl_ecrs_ske_start_processing, /*!< ServerKeyExchange: pk_verify() */
ssl_ecrs_cke_ecdh_calc_secret, /*!< ClientKeyExchange: ECDH step 2 */
ssl_ecrs_crt_vrfy_sign, /*!< CertificateVerify: pk_sign() */
} ecrs_state; /*!< current (or last) operation */
mbedtls_x509_crt *ecrs_peer_cert; /*!< The peer's CRT chain. */
size_t ecrs_n; /*!< place for saving a length */
#endif
#if defined(MBEDTLS_X509_CRT_PARSE_C) && \
!defined(MBEDTLS_SSL_KEEP_PEER_CERTIFICATE)
mbedtls_pk_context peer_pubkey; /*!< The public key from the peer. */
#endif /* MBEDTLS_X509_CRT_PARSE_C && !MBEDTLS_SSL_KEEP_PEER_CERTIFICATE */
#if defined(MBEDTLS_SSL_PROTO_DTLS)
unsigned int out_msg_seq; /*!< Outgoing handshake sequence number */
unsigned int in_msg_seq; /*!< Incoming handshake sequence number */
unsigned char *verify_cookie; /*!< Cli: HelloVerifyRequest cookie
Srv: unused */
unsigned char verify_cookie_len; /*!< Cli: cookie length
Srv: flag for sending a cookie */
uint32_t retransmit_timeout; /*!< Current value of timeout */
unsigned char retransmit_state; /*!< Retransmission state */
mbedtls_ssl_flight_item *flight; /*!< Current outgoing flight */
mbedtls_ssl_flight_item *cur_msg; /*!< Current message in flight */
unsigned char *cur_msg_p; /*!< Position in current message */
unsigned int in_flight_start_seq; /*!< Minimum message sequence in the
flight being received */
mbedtls_ssl_transform *alt_transform_out; /*!< Alternative transform for
resending messages */
unsigned char alt_out_ctr[8]; /*!< Alternative record epoch/counter
for resending messages */
#if defined(MBEDTLS_SSL_DTLS_CONNECTION_ID)
/* The state of CID configuration in this handshake. */
uint8_t cid_in_use; /*!< This indicates whether the use of the CID extension
* has been negotiated. Possible values are
* #MBEDTLS_SSL_CID_ENABLED and
* #MBEDTLS_SSL_CID_DISABLED. */
unsigned char peer_cid[ MBEDTLS_SSL_CID_OUT_LEN_MAX ]; /*! The peer's CID */
uint8_t peer_cid_len; /*!< The length of
* \c peer_cid. */
#endif /* MBEDTLS_SSL_DTLS_CONNECTION_ID */
struct
{
size_t total_bytes_buffered; /*!< Cumulative size of heap allocated
* buffers used for message buffering. */
uint8_t seen_ccs; /*!< Indicates if a CCS message has
* been seen in the current flight. */
struct mbedtls_ssl_hs_buffer
{
unsigned is_valid : 1;
unsigned is_fragmented : 1;
unsigned is_complete : 1;
unsigned char *data;
size_t data_len;
} hs[MBEDTLS_SSL_MAX_BUFFERED_HS];
struct
{
unsigned char *data;
size_t len;
unsigned epoch;
} future_record;
} buffering;
uint16_t mtu; /*!< Handshake mtu, used to fragment outgoing messages */
#endif /* MBEDTLS_SSL_PROTO_DTLS */
/*
* Checksum contexts
*/
#if defined(MBEDTLS_SSL_PROTO_TLS1) || defined(MBEDTLS_SSL_PROTO_TLS1_1)
mbedtls_md5_context fin_md5;
mbedtls_sha1_context fin_sha1;
#endif
#if defined(MBEDTLS_SSL_PROTO_TLS1_2)
#if defined(MBEDTLS_SHA256_C)
#if defined(MBEDTLS_USE_PSA_CRYPTO)
psa_hash_operation_t fin_sha256_psa;
#else
mbedtls_sha256_context fin_sha256;
#endif
#endif
#if defined(MBEDTLS_SHA384_C)
#if defined(MBEDTLS_USE_PSA_CRYPTO)
psa_hash_operation_t fin_sha384_psa;
#else
mbedtls_sha512_context fin_sha512;
#endif
#endif
#endif /* MBEDTLS_SSL_PROTO_TLS1_2 */
void (*update_checksum)(mbedtls_ssl_context *, const unsigned char *, size_t);
void (*calc_verify)(const mbedtls_ssl_context *, unsigned char *, size_t *);
void (*calc_finished)(mbedtls_ssl_context *, unsigned char *, int);
mbedtls_ssl_tls_prf_cb *tls_prf;
mbedtls_ssl_ciphersuite_t const *ciphersuite_info;
size_t pmslen; /*!< premaster length */
unsigned char randbytes[64]; /*!< random bytes */
unsigned char premaster[MBEDTLS_PREMASTER_SIZE];
/*!< premaster secret */
int resume; /*!< session resume indicator*/
int max_major_ver; /*!< max. major version client*/
int max_minor_ver; /*!< max. minor version client*/
int cli_exts; /*!< client extension presence*/
#if defined(MBEDTLS_SSL_SESSION_TICKETS)
int new_session_ticket; /*!< use NewSessionTicket? */
#endif /* MBEDTLS_SSL_SESSION_TICKETS */
#if defined(MBEDTLS_SSL_EXTENDED_MASTER_SECRET)
int extended_ms; /*!< use Extended Master Secret? */
#endif
#if defined(MBEDTLS_SSL_ASYNC_PRIVATE)
unsigned int async_in_progress : 1; /*!< an asynchronous operation is in progress */
#endif /* MBEDTLS_SSL_ASYNC_PRIVATE */
#if defined(MBEDTLS_SSL_ASYNC_PRIVATE)
/** Asynchronous operation context. This field is meant for use by the
* asynchronous operation callbacks (mbedtls_ssl_config::f_async_sign_start,
* mbedtls_ssl_config::f_async_decrypt_start,
* mbedtls_ssl_config::f_async_resume, mbedtls_ssl_config::f_async_cancel).
* The library does not use it internally. */
void *user_async_ctx;
#endif /* MBEDTLS_SSL_ASYNC_PRIVATE */
};
typedef struct mbedtls_ssl_hs_buffer mbedtls_ssl_hs_buffer;
/*
* Representation of decryption/encryption transformations on records
*
* There are the following general types of record transformations:
* - Stream transformations (TLS versions <= 1.2 only)
* Transformation adding a MAC and applying a stream-cipher
* to the authenticated message.
* - CBC block cipher transformations ([D]TLS versions <= 1.2 only)
* In addition to the distinction of the order of encryption and
* authentication, there's a fundamental difference between the
* handling in TLS 1.0 and TLS 1.1 and TLS 1.2: For TLS 1.0,
* the final IV after processing a record is used
* as the IV for the next record. No explicit IV is contained
* in an encrypted record. The IV for the first record is extracted
* at key extraction time. In contrast, for TLS 1.1 and 1.2, no
* IV is generated at key extraction time, but every encrypted
* record is explicitly prefixed by the IV with which it was encrypted.
* - AEAD transformations ([D]TLS versions >= 1.2 only)
* These come in two fundamentally different versions, the first one
* used in TLS 1.2, excluding ChaChaPoly ciphersuites, and the second
* one used for ChaChaPoly ciphersuites in TLS 1.2 as well as for TLS 1.3.
* In the first transformation, the IV to be used for a record is obtained
* as the concatenation of an explicit, static 4-byte IV and the 8-byte
* record sequence number, and explicitly prepending this sequence number
* to the encrypted record. In contrast, in the second transformation
* the IV is obtained by XOR'ing a static IV obtained at key extraction
* time with the 8-byte record sequence number, without prepending the
* latter to the encrypted record.
*
* Additionally, DTLS 1.2 + CID as well as TLS 1.3 use an inner plaintext
* which allows to add flexible length padding and to hide a record's true
* content type.
*
* In addition to type and version, the following parameters are relevant:
* - The symmetric cipher algorithm to be used.
* - The (static) encryption/decryption keys for the cipher.
* - For stream/CBC, the type of message digest to be used.
* - For stream/CBC, (static) encryption/decryption keys for the digest.
* - For AEAD transformations, the size (potentially 0) of an explicit,
* random initialization vector placed in encrypted records.
* - For some transformations (currently AEAD and CBC in TLS 1.0)
* an implicit IV. It may be static (e.g. AEAD) or dynamic (e.g. CBC)
* and (if present) is combined with the explicit IV in a transformation-
* dependent way (e.g. appending in TLS 1.2 and XOR'ing in TLS 1.3).
* - For stream/CBC, a flag determining the order of encryption and MAC.
* - The details of the transformation depend on the SSL/TLS version.
* - The length of the authentication tag.
*
* Note: Except for CBC in TLS 1.0, these parameters are
* constant across multiple encryption/decryption operations.
* For CBC, the implicit IV needs to be updated after each
* operation.
*
* The struct below refines this abstract view as follows:
* - The cipher underlying the transformation is managed in
* cipher contexts cipher_ctx_{enc/dec}, which must have the
* same cipher type. The mode of these cipher contexts determines
* the type of the transformation in the sense above: e.g., if
* the type is MBEDTLS_CIPHER_AES_256_CBC resp. MBEDTLS_CIPHER_AES_192_GCM
* then the transformation has type CBC resp. AEAD.
* - The cipher keys are never stored explicitly but
* are maintained within cipher_ctx_{enc/dec}.
* - For stream/CBC transformations, the message digest contexts
* used for the MAC's are stored in md_ctx_{enc/dec}. These contexts
* are unused for AEAD transformations.
* - For stream/CBC transformations and versions >= TLS 1.0, the
* MAC keys are not stored explicitly but maintained within
* md_ctx_{enc/dec}.
* - The mac_enc and mac_dec fields are unused for EAD transformations or
* transformations >= TLS 1.0.
* - For transformations using an implicit IV maintained within
* the transformation context, its contents are stored within
* iv_{enc/dec}.
* - The value of ivlen indicates the length of the IV.
* This is redundant in case of stream/CBC transformations
* which always use 0 resp. the cipher's block length as the
* IV length, but is needed for AEAD ciphers and may be
* different from the underlying cipher's block length
* in this case.
* - The field fixed_ivlen is nonzero for AEAD transformations only
* and indicates the length of the static part of the IV which is
* constant throughout the communication, and which is stored in
* the first fixed_ivlen bytes of the iv_{enc/dec} arrays.
* Note: For CBC in TLS 1.0, the fields iv_{enc/dec}
* still store IV's for continued use across multiple transformations,
* so it is not true that fixed_ivlen == 0 means that iv_{enc/dec} are
* not being used!
* - minor_ver denotes the SSL/TLS version
* - For stream/CBC transformations, maclen denotes the length of the
* authentication tag, while taglen is unused and 0.
* - For AEAD transformations, taglen denotes the length of the
* authentication tag, while maclen is unused and 0.
* - For CBC transformations, encrypt_then_mac determines the
* order of encryption and authentication. This field is unused
* in other transformations.
*
*/
struct mbedtls_ssl_transform
{
/*
* Session specific crypto layer
*/
size_t minlen; /*!< min. ciphertext length */
size_t ivlen; /*!< IV length */
size_t fixed_ivlen; /*!< Fixed part of IV (AEAD) */
size_t maclen; /*!< MAC(CBC) len */
size_t taglen; /*!< TAG(AEAD) len */
unsigned char iv_enc[16]; /*!< IV (encryption) */
unsigned char iv_dec[16]; /*!< IV (decryption) */
#if defined(MBEDTLS_SSL_SOME_SUITES_USE_MAC)
mbedtls_md_context_t md_ctx_enc; /*!< MAC (encryption) */
mbedtls_md_context_t md_ctx_dec; /*!< MAC (decryption) */
#if defined(MBEDTLS_SSL_ENCRYPT_THEN_MAC)
int encrypt_then_mac; /*!< flag for EtM activation */
#endif
#endif /* MBEDTLS_SSL_SOME_SUITES_USE_MAC */
mbedtls_cipher_context_t cipher_ctx_enc; /*!< encryption context */
mbedtls_cipher_context_t cipher_ctx_dec; /*!< decryption context */
int minor_ver;
#if defined(MBEDTLS_SSL_DTLS_CONNECTION_ID)
uint8_t in_cid_len;
uint8_t out_cid_len;
unsigned char in_cid [ MBEDTLS_SSL_CID_OUT_LEN_MAX ];
unsigned char out_cid[ MBEDTLS_SSL_CID_OUT_LEN_MAX ];
#endif /* MBEDTLS_SSL_DTLS_CONNECTION_ID */
#if defined(MBEDTLS_SSL_CONTEXT_SERIALIZATION)
/* We need the Hello random bytes in order to re-derive keys from the
* Master Secret and other session info, see ssl_populate_transform() */
unsigned char randbytes[64]; /*!< ServerHello.random+ClientHello.random */
#endif /* MBEDTLS_SSL_CONTEXT_SERIALIZATION */
};
/*
* Return 1 if the transform uses an AEAD cipher, 0 otherwise.
* Equivalently, return 0 if a separate MAC is used, 1 otherwise.
*/
static inline int mbedtls_ssl_transform_uses_aead(
const mbedtls_ssl_transform *transform )
{
#if defined(MBEDTLS_SSL_SOME_SUITES_USE_MAC)
return( transform->maclen == 0 && transform->taglen != 0 );
#else
(void) transform;
return( 1 );
#endif
}
/*
* Internal representation of record frames
*
* Instances come in two flavors:
* (1) Encrypted
* These always have data_offset = 0
* (2) Unencrypted
* These have data_offset set to the amount of
* pre-expansion during record protection. Concretely,
* this is the length of the fixed part of the explicit IV
* used for encryption, or 0 if no explicit IV is used
* (e.g. for CBC in TLS 1.0, or stream ciphers).
*
* The reason for the data_offset in the unencrypted case
* is to allow for in-place conversion of an unencrypted to
* an encrypted record. If the offset wasn't included, the
* encrypted content would need to be shifted afterwards to
* make space for the fixed IV.
*
*/
#if MBEDTLS_SSL_CID_OUT_LEN_MAX > MBEDTLS_SSL_CID_IN_LEN_MAX
#define MBEDTLS_SSL_CID_LEN_MAX MBEDTLS_SSL_CID_OUT_LEN_MAX
#else
#define MBEDTLS_SSL_CID_LEN_MAX MBEDTLS_SSL_CID_IN_LEN_MAX
#endif
typedef struct
{
uint8_t ctr[8]; /* In TLS: The implicit record sequence number.
* In DTLS: The 2-byte epoch followed by
* the 6-byte sequence number.
* This is stored as a raw big endian byte array
* as opposed to a uint64_t because we rarely
* need to perform arithmetic on this, but do
* need it as a Byte array for the purpose of
* MAC computations. */
uint8_t type; /* The record content type. */
uint8_t ver[2]; /* SSL/TLS version as present on the wire.
* Convert to internal presentation of versions
* using mbedtls_ssl_read_version() and
* mbedtls_ssl_write_version().
* Keep wire-format for MAC computations. */
unsigned char *buf; /* Memory buffer enclosing the record content */
size_t buf_len; /* Buffer length */
size_t data_offset; /* Offset of record content */
size_t data_len; /* Length of record content */
#if defined(MBEDTLS_SSL_DTLS_CONNECTION_ID)
uint8_t cid_len; /* Length of the CID (0 if not present) */
unsigned char cid[ MBEDTLS_SSL_CID_LEN_MAX ]; /* The CID */
#endif /* MBEDTLS_SSL_DTLS_CONNECTION_ID */
} mbedtls_record;
#if defined(MBEDTLS_X509_CRT_PARSE_C)
/*
* List of certificate + private key pairs
*/
struct mbedtls_ssl_key_cert
{
mbedtls_x509_crt *cert; /*!< cert */
mbedtls_pk_context *key; /*!< private key */
mbedtls_ssl_key_cert *next; /*!< next key/cert pair */
};
#endif /* MBEDTLS_X509_CRT_PARSE_C */
#if defined(MBEDTLS_SSL_PROTO_DTLS)
/*
* List of handshake messages kept around for resending
*/
struct mbedtls_ssl_flight_item
{
unsigned char *p; /*!< message, including handshake headers */
size_t len; /*!< length of p */
unsigned char type; /*!< type of the message: handshake or CCS */
mbedtls_ssl_flight_item *next; /*!< next handshake message(s) */
};
#endif /* MBEDTLS_SSL_PROTO_DTLS */
#if defined(MBEDTLS_SSL_PROTO_TLS1_2) && \
defined(MBEDTLS_KEY_EXCHANGE_WITH_CERT_ENABLED)
/* Find an entry in a signature-hash set matching a given hash algorithm. */
mbedtls_md_type_t mbedtls_ssl_sig_hash_set_find( mbedtls_ssl_sig_hash_set_t *set,
mbedtls_pk_type_t sig_alg );
/* Add a signature-hash-pair to a signature-hash set */
void mbedtls_ssl_sig_hash_set_add( mbedtls_ssl_sig_hash_set_t *set,
mbedtls_pk_type_t sig_alg,
mbedtls_md_type_t md_alg );
/* Allow exactly one hash algorithm for each signature. */
void mbedtls_ssl_sig_hash_set_const_hash( mbedtls_ssl_sig_hash_set_t *set,
mbedtls_md_type_t md_alg );
/* Setup an empty signature-hash set */
static inline void mbedtls_ssl_sig_hash_set_init( mbedtls_ssl_sig_hash_set_t *set )
{
mbedtls_ssl_sig_hash_set_const_hash( set, MBEDTLS_MD_NONE );
}
#endif /* MBEDTLS_SSL_PROTO_TLS1_2) &&
MBEDTLS_KEY_EXCHANGE_WITH_CERT_ENABLED */
/**
* \brief Free referenced items in an SSL transform context and clear
* memory
*
* \param transform SSL transform context
*/
void mbedtls_ssl_transform_free( mbedtls_ssl_transform *transform );
/**
* \brief Free referenced items in an SSL handshake context and clear
* memory
*
* \param ssl SSL context
*/
void mbedtls_ssl_handshake_free( mbedtls_ssl_context *ssl );
int mbedtls_ssl_handshake_client_step( mbedtls_ssl_context *ssl );
int mbedtls_ssl_handshake_server_step( mbedtls_ssl_context *ssl );
void mbedtls_ssl_handshake_wrapup( mbedtls_ssl_context *ssl );
int mbedtls_ssl_send_fatal_handshake_failure( mbedtls_ssl_context *ssl );
void mbedtls_ssl_reset_checksum( mbedtls_ssl_context *ssl );
int mbedtls_ssl_derive_keys( mbedtls_ssl_context *ssl );
int mbedtls_ssl_handle_message_type( mbedtls_ssl_context *ssl );
int mbedtls_ssl_prepare_handshake_record( mbedtls_ssl_context *ssl );
void mbedtls_ssl_update_handshake_status( mbedtls_ssl_context *ssl );
/**
* \brief Update record layer
*
* This function roughly separates the implementation
* of the logic of (D)TLS from the implementation
* of the secure transport.
*
* \param ssl The SSL context to use.
* \param update_hs_digest This indicates if the handshake digest
* should be automatically updated in case
* a handshake message is found.
*
* \return 0 or non-zero error code.
*
* \note A clarification on what is called 'record layer' here
* is in order, as many sensible definitions are possible:
*
* The record layer takes as input an untrusted underlying
* transport (stream or datagram) and transforms it into
* a serially multiplexed, secure transport, which
* conceptually provides the following:
*
* (1) Three datagram based, content-agnostic transports
* for handshake, alert and CCS messages.
* (2) One stream- or datagram-based transport
* for application data.
* (3) Functionality for changing the underlying transform
* securing the contents.
*
* The interface to this functionality is given as follows:
*
* a Updating
* [Currently implemented by mbedtls_ssl_read_record]
*
* Check if and on which of the four 'ports' data is pending:
* Nothing, a controlling datagram of type (1), or application
* data (2). In any case data is present, internal buffers
* provide access to the data for the user to process it.
* Consumption of type (1) datagrams is done automatically
* on the next update, invalidating that the internal buffers
* for previous datagrams, while consumption of application
* data (2) is user-controlled.
*
* b Reading of application data
* [Currently manual adaption of ssl->in_offt pointer]
*
* As mentioned in the last paragraph, consumption of data
* is different from the automatic consumption of control
* datagrams (1) because application data is treated as a stream.
*
* c Tracking availability of application data
* [Currently manually through decreasing ssl->in_msglen]
*
* For efficiency and to retain datagram semantics for
* application data in case of DTLS, the record layer
* provides functionality for checking how much application
* data is still available in the internal buffer.
*
* d Changing the transformation securing the communication.
*
* Given an opaque implementation of the record layer in the
* above sense, it should be possible to implement the logic
* of (D)TLS on top of it without the need to know anything
* about the record layer's internals. This is done e.g.
* in all the handshake handling functions, and in the
* application data reading function mbedtls_ssl_read.
*
* \note The above tries to give a conceptual picture of the
* record layer, but the current implementation deviates
* from it in some places. For example, our implementation of
* the update functionality through mbedtls_ssl_read_record
* discards datagrams depending on the current state, which
* wouldn't fall under the record layer's responsibility
* following the above definition.
*
*/
int mbedtls_ssl_read_record( mbedtls_ssl_context *ssl,
unsigned update_hs_digest );
int mbedtls_ssl_fetch_input( mbedtls_ssl_context *ssl, size_t nb_want );
int mbedtls_ssl_write_handshake_msg( mbedtls_ssl_context *ssl );
int mbedtls_ssl_write_record( mbedtls_ssl_context *ssl, uint8_t force_flush );
int mbedtls_ssl_flush_output( mbedtls_ssl_context *ssl );
int mbedtls_ssl_parse_certificate( mbedtls_ssl_context *ssl );
int mbedtls_ssl_write_certificate( mbedtls_ssl_context *ssl );
int mbedtls_ssl_parse_change_cipher_spec( mbedtls_ssl_context *ssl );
int mbedtls_ssl_write_change_cipher_spec( mbedtls_ssl_context *ssl );
int mbedtls_ssl_parse_finished( mbedtls_ssl_context *ssl );
int mbedtls_ssl_write_finished( mbedtls_ssl_context *ssl );
void mbedtls_ssl_optimize_checksum( mbedtls_ssl_context *ssl,
const mbedtls_ssl_ciphersuite_t *ciphersuite_info );
#if defined(MBEDTLS_KEY_EXCHANGE_SOME_PSK_ENABLED)
int mbedtls_ssl_psk_derive_premaster( mbedtls_ssl_context *ssl, mbedtls_key_exchange_type_t key_ex );
/**
* Get the first defined PSK by order of precedence:
* 1. handshake PSK set by \c mbedtls_ssl_set_hs_psk() in the PSK callback
* 2. static PSK configured by \c mbedtls_ssl_conf_psk()
* Return a code and update the pair (PSK, PSK length) passed to this function
*/
static inline int mbedtls_ssl_get_psk( const mbedtls_ssl_context *ssl,
const unsigned char **psk, size_t *psk_len )
{
if( ssl->handshake->psk != NULL && ssl->handshake->psk_len > 0 )
{
*psk = ssl->handshake->psk;
*psk_len = ssl->handshake->psk_len;
}
else if( ssl->conf->psk != NULL && ssl->conf->psk_len > 0 )
{
*psk = ssl->conf->psk;
*psk_len = ssl->conf->psk_len;
}
else
{
*psk = NULL;
*psk_len = 0;
return( MBEDTLS_ERR_SSL_PRIVATE_KEY_REQUIRED );
}
return( 0 );
}
#if defined(MBEDTLS_USE_PSA_CRYPTO)
/**
* Get the first defined opaque PSK by order of precedence:
* 1. handshake PSK set by \c mbedtls_ssl_set_hs_psk_opaque() in the PSK
* callback
* 2. static PSK configured by \c mbedtls_ssl_conf_psk_opaque()
* Return an opaque PSK
*/
static inline psa_key_id_t mbedtls_ssl_get_opaque_psk(
const mbedtls_ssl_context *ssl )
{
if( ! mbedtls_svc_key_id_is_null( ssl->handshake->psk_opaque ) )
return( ssl->handshake->psk_opaque );
if( ! mbedtls_svc_key_id_is_null( ssl->conf->psk_opaque ) )
return( ssl->conf->psk_opaque );
return( MBEDTLS_SVC_KEY_ID_INIT );
}
#endif /* MBEDTLS_USE_PSA_CRYPTO */
#endif /* MBEDTLS_KEY_EXCHANGE_SOME_PSK_ENABLED */
#if defined(MBEDTLS_PK_C)
unsigned char mbedtls_ssl_sig_from_pk( mbedtls_pk_context *pk );
unsigned char mbedtls_ssl_sig_from_pk_alg( mbedtls_pk_type_t type );
mbedtls_pk_type_t mbedtls_ssl_pk_alg_from_sig( unsigned char sig );
#endif
mbedtls_md_type_t mbedtls_ssl_md_alg_from_hash( unsigned char hash );
unsigned char mbedtls_ssl_hash_from_md_alg( int md );
int mbedtls_ssl_set_calc_verify_md( mbedtls_ssl_context *ssl, int md );
#if defined(MBEDTLS_ECP_C)
int mbedtls_ssl_check_curve( const mbedtls_ssl_context *ssl, mbedtls_ecp_group_id grp_id );
#endif
#if defined(MBEDTLS_KEY_EXCHANGE_WITH_CERT_ENABLED)
int mbedtls_ssl_check_sig_hash( const mbedtls_ssl_context *ssl,
mbedtls_md_type_t md );
#endif
#if defined(MBEDTLS_SSL_DTLS_SRTP)
static inline mbedtls_ssl_srtp_profile mbedtls_ssl_check_srtp_profile_value
( const uint16_t srtp_profile_value )
{
switch( srtp_profile_value )
{
case MBEDTLS_TLS_SRTP_AES128_CM_HMAC_SHA1_80:
case MBEDTLS_TLS_SRTP_AES128_CM_HMAC_SHA1_32:
case MBEDTLS_TLS_SRTP_NULL_HMAC_SHA1_80:
case MBEDTLS_TLS_SRTP_NULL_HMAC_SHA1_32:
return srtp_profile_value;
default: break;
}
return( MBEDTLS_TLS_SRTP_UNSET );
}
#endif
#if defined(MBEDTLS_X509_CRT_PARSE_C)
static inline mbedtls_pk_context *mbedtls_ssl_own_key( mbedtls_ssl_context *ssl )
{
mbedtls_ssl_key_cert *key_cert;
if( ssl->handshake != NULL && ssl->handshake->key_cert != NULL )
key_cert = ssl->handshake->key_cert;
else
key_cert = ssl->conf->key_cert;
return( key_cert == NULL ? NULL : key_cert->key );
}
static inline mbedtls_x509_crt *mbedtls_ssl_own_cert( mbedtls_ssl_context *ssl )
{
mbedtls_ssl_key_cert *key_cert;
if( ssl->handshake != NULL && ssl->handshake->key_cert != NULL )
key_cert = ssl->handshake->key_cert;
else
key_cert = ssl->conf->key_cert;
return( key_cert == NULL ? NULL : key_cert->cert );
}
/*
* Check usage of a certificate wrt extensions:
* keyUsage, extendedKeyUsage (later), and nSCertType (later).
*
* Warning: cert_endpoint is the endpoint of the cert (ie, of our peer when we
* check a cert we received from them)!
*
* Return 0 if everything is OK, -1 if not.
*/
int mbedtls_ssl_check_cert_usage( const mbedtls_x509_crt *cert,
const mbedtls_ssl_ciphersuite_t *ciphersuite,
int cert_endpoint,
uint32_t *flags );
#endif /* MBEDTLS_X509_CRT_PARSE_C */
void mbedtls_ssl_write_version( int major, int minor, int transport,
unsigned char ver[2] );
void mbedtls_ssl_read_version( int *major, int *minor, int transport,
const unsigned char ver[2] );
static inline size_t mbedtls_ssl_in_hdr_len( const mbedtls_ssl_context *ssl )
{
#if !defined(MBEDTLS_SSL_PROTO_DTLS)
((void) ssl);
#endif
#if defined(MBEDTLS_SSL_PROTO_DTLS)
if( ssl->conf->transport == MBEDTLS_SSL_TRANSPORT_DATAGRAM )
{
return( 13 );
}
else
#endif /* MBEDTLS_SSL_PROTO_DTLS */
{
return( 5 );
}
}
static inline size_t mbedtls_ssl_out_hdr_len( const mbedtls_ssl_context *ssl )
{
return( (size_t) ( ssl->out_iv - ssl->out_hdr ) );
}
static inline size_t mbedtls_ssl_hs_hdr_len( const mbedtls_ssl_context *ssl )
{
#if defined(MBEDTLS_SSL_PROTO_DTLS)
if( ssl->conf->transport == MBEDTLS_SSL_TRANSPORT_DATAGRAM )
return( 12 );
#else
((void) ssl);
#endif
return( 4 );
}
#if defined(MBEDTLS_SSL_PROTO_DTLS)
void mbedtls_ssl_send_flight_completed( mbedtls_ssl_context *ssl );
void mbedtls_ssl_recv_flight_completed( mbedtls_ssl_context *ssl );
int mbedtls_ssl_resend( mbedtls_ssl_context *ssl );
int mbedtls_ssl_flight_transmit( mbedtls_ssl_context *ssl );
#endif
/* Visible for testing purposes only */
#if defined(MBEDTLS_SSL_DTLS_ANTI_REPLAY)
int mbedtls_ssl_dtls_replay_check( mbedtls_ssl_context const *ssl );
void mbedtls_ssl_dtls_replay_update( mbedtls_ssl_context *ssl );
#endif
int mbedtls_ssl_session_copy( mbedtls_ssl_session *dst,
const mbedtls_ssl_session *src );
/* constant-time buffer comparison */
static inline int mbedtls_ssl_safer_memcmp( const void *a, const void *b, size_t n )
{
size_t i;
volatile const unsigned char *A = (volatile const unsigned char *) a;
volatile const unsigned char *B = (volatile const unsigned char *) b;
volatile unsigned char diff = 0;
for( i = 0; i < n; i++ )
{
/* Read volatile data in order before computing diff.
* This avoids IAR compiler warning:
* 'the order of volatile accesses is undefined ..' */
unsigned char x = A[i], y = B[i];
diff |= x ^ y;
}
return( diff );
}
#if defined(MBEDTLS_SSL_PROTO_TLS1) || defined(MBEDTLS_SSL_PROTO_TLS1_1)
int mbedtls_ssl_get_key_exchange_md_ssl_tls( mbedtls_ssl_context *ssl,
unsigned char *output,
unsigned char *data, size_t data_len );
#endif /* MBEDTLS_SSL_PROTO_TLS1 || MBEDTLS_SSL_PROTO_TLS1_1 */
#if defined(MBEDTLS_SSL_PROTO_TLS1) || defined(MBEDTLS_SSL_PROTO_TLS1_1) || \
defined(MBEDTLS_SSL_PROTO_TLS1_2)
/* The hash buffer must have at least MBEDTLS_MD_MAX_SIZE bytes of length. */
int mbedtls_ssl_get_key_exchange_md_tls1_2( mbedtls_ssl_context *ssl,
unsigned char *hash, size_t *hashlen,
unsigned char *data, size_t data_len,
mbedtls_md_type_t md_alg );
#endif /* MBEDTLS_SSL_PROTO_TLS1 || MBEDTLS_SSL_PROTO_TLS1_1 || \
MBEDTLS_SSL_PROTO_TLS1_2 */
#ifdef __cplusplus
}
#endif
void mbedtls_ssl_transform_init( mbedtls_ssl_transform *transform );
int mbedtls_ssl_encrypt_buf( mbedtls_ssl_context *ssl,
mbedtls_ssl_transform *transform,
mbedtls_record *rec,
int (*f_rng)(void *, unsigned char *, size_t),
void *p_rng );
int mbedtls_ssl_decrypt_buf( mbedtls_ssl_context const *ssl,
mbedtls_ssl_transform *transform,
mbedtls_record *rec );
/* Length of the "epoch" field in the record header */
static inline size_t mbedtls_ssl_ep_len( const mbedtls_ssl_context *ssl )
{
#if defined(MBEDTLS_SSL_PROTO_DTLS)
if( ssl->conf->transport == MBEDTLS_SSL_TRANSPORT_DATAGRAM )
return( 2 );
#else
((void) ssl);
#endif
return( 0 );
}
#if defined(MBEDTLS_SSL_PROTO_DTLS)
int mbedtls_ssl_resend_hello_request( mbedtls_ssl_context *ssl );
#endif /* MBEDTLS_SSL_PROTO_DTLS */
void mbedtls_ssl_set_timer( mbedtls_ssl_context *ssl, uint32_t millisecs );
int mbedtls_ssl_check_timer( mbedtls_ssl_context *ssl );
void mbedtls_ssl_reset_in_out_pointers( mbedtls_ssl_context *ssl );
void mbedtls_ssl_update_out_pointers( mbedtls_ssl_context *ssl,
mbedtls_ssl_transform *transform );
void mbedtls_ssl_update_in_pointers( mbedtls_ssl_context *ssl );
int mbedtls_ssl_session_reset_int( mbedtls_ssl_context *ssl, int partial );
#if defined(MBEDTLS_SSL_DTLS_ANTI_REPLAY)
void mbedtls_ssl_dtls_replay_reset( mbedtls_ssl_context *ssl );
#endif
void mbedtls_ssl_handshake_wrapup_free_hs_transform( mbedtls_ssl_context *ssl );
#if defined(MBEDTLS_SSL_RENEGOTIATION)
int mbedtls_ssl_start_renegotiation( mbedtls_ssl_context *ssl );
#endif /* MBEDTLS_SSL_RENEGOTIATION */
#if defined(MBEDTLS_SSL_PROTO_DTLS)
size_t mbedtls_ssl_get_current_mtu( const mbedtls_ssl_context *ssl );
void mbedtls_ssl_buffering_free( mbedtls_ssl_context *ssl );
void mbedtls_ssl_flight_free( mbedtls_ssl_flight_item *flight );
#endif /* MBEDTLS_SSL_PROTO_DTLS */
#endif /* ssl_misc.h */
Reference in New Issue View Git Blame Copy Permalink