AuroraMiddleware/qt5base-lts
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
2a60c4b99f
qt5base-lts/mkspecs/common/mac.conf

52 lines
1.4 KiB
Plaintext
Raw Normal View History

Distinguish between 'mac' and 'macx' qmake scopes The former applies both on Mac OS X and iOS, but 'macx' is specific to Mac OS X. ios.conf and macx.conf now share most of their settings in the common mac.conf. We set the default QMAKE_MAC_SDK before loading mac.conf, so that any overrides in the device config will apply afterwards. This means configure's mkspec parsing will be able to read the QMAKE_MAC_SDK. Change-Id: I0c7e26a6a0103e19b23ef152aa9e4ab461cee632 Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com> Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
2013-03-02 14:46:37 +00:00
#
Refer to Apple products by their actual names. This is a comment-only change. Change-Id: I2432b1135ef21d781c9486df06699710f2696ee3 Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
2013-07-09 14:07:07 +00:00
# qmake configuration common to OS X and iOS
Distinguish between 'mac' and 'macx' qmake scopes The former applies both on Mac OS X and iOS, but 'macx' is specific to Mac OS X. ios.conf and macx.conf now share most of their settings in the common mac.conf. We set the default QMAKE_MAC_SDK before loading mac.conf, so that any overrides in the device config will apply afterwards. This means configure's mkspec parsing will be able to read the QMAKE_MAC_SDK. Change-Id: I0c7e26a6a0103e19b23ef152aa9e4ab461cee632 Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com> Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
2013-03-02 14:46:37 +00:00
#
!load(device_config): error(Could not successfully load device configuration)
Add osx and darwin scopes to qmake. This gives us better consistency across the Qt ecosystem. Change-Id: Ie12ebb6e8c826ed2e0445eb37de0b79595da41c2 Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
2013-07-09 14:09:38 +00:00
QMAKE_PLATFORM += mac darwin
Distinguish between 'mac' and 'macx' qmake scopes The former applies both on Mac OS X and iOS, but 'macx' is specific to Mac OS X. ios.conf and macx.conf now share most of their settings in the common mac.conf. We set the default QMAKE_MAC_SDK before loading mac.conf, so that any overrides in the device config will apply afterwards. This means configure's mkspec parsing will be able to read the QMAKE_MAC_SDK. Change-Id: I0c7e26a6a0103e19b23ef152aa9e4ab461cee632 Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com> Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
2013-03-02 14:46:37 +00:00
Remove iOS/OS X duplication Move common configuration to mac Change-Id: Ic4a6ad896ac6fd46a0914a267ba87adecc6b37e4 Reviewed-by: Jake Petroules <jake.petroules@theqtcompany.com>
2016-02-15 21:30:40 +00:00
MAKEFILE_GENERATOR = UNIX
Merge remote-tracking branch 'origin/5.7' into dev Conflicts: mkspecs/common/mac.conf mkspecs/features/configure_base.prf mkspecs/features/configure.prf mkspecs/macx-clang-32/qmake.conf mkspecs/macx-clang/qmake.conf mkspecs/macx-ios-clang/qmake.conf src/network/ssl/qsslsocket_openssl_symbols_p.h Change-Id: I768b592e8e589662b1fdb9b8cbd633fef26845b6
2016-06-23 11:23:57 +00:00
CONFIG += app_bundle incremental global_init_link_order lib_version_first sdk
Remove iOS/OS X duplication Move common configuration to mac Change-Id: Ic4a6ad896ac6fd46a0914a267ba87adecc6b37e4 Reviewed-by: Jake Petroules <jake.petroules@theqtcompany.com>
2016-02-15 21:30:40 +00:00
QMAKE_INCREMENTAL_STYLE = sublib
move inclusions of unix.conf (and related files) near the top that way we can override the values defined there. Change-Id: Ib9bce596d9fd43875b26a97c5489ee9d0d46b77c Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
2015-09-29 10:39:08 +00:00
include(unix.conf)
Distinguish between 'mac' and 'macx' qmake scopes The former applies both on Mac OS X and iOS, but 'macx' is specific to Mac OS X. ios.conf and macx.conf now share most of their settings in the common mac.conf. We set the default QMAKE_MAC_SDK before loading mac.conf, so that any overrides in the device config will apply afterwards. This means configure's mkspec parsing will be able to read the QMAKE_MAC_SDK. Change-Id: I0c7e26a6a0103e19b23ef152aa9e4ab461cee632 Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com> Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
2013-03-02 14:46:37 +00:00
QMAKE_RESOURCE = /Developer/Tools/Rez
QMAKE_EXTENSION_SHLIB = dylib
QMAKE_LIBDIR =
Fix determination of OpenGL include paths on macOS, take 3 The sysrootification of QMAKE_INCDIR_OPENGL on macOS must happen only once. Commit 49ef3773 addressed this but stored the sysrootified QMAKE_INCDIR_OPENGL in qt_lib_gui_private.pri. For installer packages, these paths are the paths of the build machine and most likely wrong on the user's machine. This reverts commit 4949ef377349ba4dae840c2d5caa36e2d516707baa and restores the sysrootification in sdk.prf. The original include paths are assigned to QMAKE_EXPORT_INCDIR_OPENGL and stored as QMAKE_INCDIR_OPENGL in qt_lib_gui_private.pri. Fixes: QTBUG-75374 Task-number: QTBUG-73736 Change-Id: I4c0f65866d60660c632363dba3adc7ea2e344bfc Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
2019-04-25 10:51:49 +00:00
# sdk.prf will prefix the proper SDK sysroot
Fix '=' alignment and replace tabs in *.conf (whitespace only change) Replace all tabs with proper space characters and consistently align the '=' characters. The default alignment for the '=' of 25 characters has been left as is to get a minimal diff. Lines with the '=' further to the right and those belonging to 'proper code (TM)' have not been touched. The work was mostly done using the following python script (might come in handy again...): import sys, re indent_eq = 25 + 0*4 # 25 characters was the most widely used indentation for the '=' character p = re.compile(r'(\w+)[ \t]*([\-\+]?)(=$|= )[ \t]*(.*$)') for fn in sys.argv[1:]: with open(fn, 'r+') as f: lines = [] nl_count = 0 continuity_indent = None for l in f: m = p.match(l) nl = l if m: n_spaces = max(m.start(3), indent_eq - 1) - len(m.group(2)) - len(m.group(1)) if m.group(2) and m.start(2) >= indent_eq-1 and m.start(2) % 4 == 0: n_spaces -= 1 # left-shift '+=' by one if the '+' is aligned to a multiple of 4 n_spaces = max(1, n_spaces) # we want at least one space before '='/'+=' nl = m.group(1) + ' '*n_spaces + ''.join(m.group(2,3,4)) + '\n' continuity_indent = nl.find('= ') + 2 if l[-2] == '\\' else None # remember indent on '\\$' elif continuity_indent: nl = ' '*continuity_indent + l.lstrip() if l[-2] != '\\': # check when to stop the continuation continuity_indent = None elif l.startswith('#'): nl = l.expandtabs(2) if l != nl: nl_count += 1 lines.append(nl) if nl_count > 0: print fn, nl_count, len(lines) f.seek(0) f.writelines(lines) f.truncate() Change-Id: I1d2870d0a2fe2e30d398c140fe523e69dd20c81b Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
2013-03-19 01:57:31 +00:00
QMAKE_INCDIR_OPENGL = \
Distinguish between 'mac' and 'macx' qmake scopes The former applies both on Mac OS X and iOS, but 'macx' is specific to Mac OS X. ios.conf and macx.conf now share most of their settings in the common mac.conf. We set the default QMAKE_MAC_SDK before loading mac.conf, so that any overrides in the device config will apply afterwards. This means configure's mkspec parsing will be able to read the QMAKE_MAC_SDK. Change-Id: I0c7e26a6a0103e19b23ef152aa9e4ab461cee632 Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com> Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
2013-03-02 14:46:37 +00:00
/System/Library/Frameworks/OpenGL.framework/Headers \
/System/Library/Frameworks/AGL.framework/Headers/
QMAKE_FIX_RPATH = install_name_tool -id
Enable rpath support on OS X and iOS platform This is done by defining QMAKE_LFLAGS_RPATH for compilers for Apple platform. Task-number: QTBUG-31814 Change-Id: I9040df341ad46395d6ab71bc760ba7a5ee5ff291 Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com> Reviewed-by: Jake Petroules <jake.petroules@petroules.com>
2014-08-07 11:03:00 +00:00
QMAKE_LFLAGS_RPATH = -Wl,-rpath,
Strip bootstrapped binaries of unused sections This matches the -ffunction-sections from bootstrap.pro, which tells the compiler to create a section for each function. The -gc-sections option tells the linker to drop what wasn't used (normally, it only drops entire files). Before (on Linux, built with -O3, no LTO): text data bss dec hex filename 1746385 7920 3750 1758055 1ad367 bin/moc 1444101 6664 1894 1452659 162a73 bin/rcc 4407725 1568 4896 4414189 435aed bin/qmake After: text data bss dec hex filename 1131655 6520 3494 1141669 116ba5 bin/moc 1027043 5480 1766 1034289 fc831 bin/rcc 3578489 1656 5313 3585458 36b5b2 bin/qmake Gain: 35% on moc, 28% on rcc, 19% on qmake Before (on OS X): __TEXT __DATA __OBJC others dec hex 1495040 12288 0 4294993008 4296500336 100176470 bin/moc 1265664 8192 0 4294983904 4296257760 10013b0e0 bin/rcc 5279744 81920 0 4297912320 4303273984 1007ec000 bin/qmake After: __TEXT __DATA __OBJC others dec hex 806912 8192 0 4294988132 4295803236 1000cc164 bin/moc 720896 8192 0 4294979764 4295708852 1000b50b4 bin/rcc 4841472 77824 0 4295580688 4300499984 100546c10 bin/qmake Gain: 46% on moc, 43% on rcc, 8% on qmake. Change-Id: Icc7cdc9fd6f5db15537b4adabaac7e7a27e539d4 Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
2014-05-06 18:27:06 +00:00
QMAKE_LFLAGS_GCSECTIONS = -Wl,-dead_strip
Distinguish between 'mac' and 'macx' qmake scopes The former applies both on Mac OS X and iOS, but 'macx' is specific to Mac OS X. ios.conf and macx.conf now share most of their settings in the common mac.conf. We set the default QMAKE_MAC_SDK before loading mac.conf, so that any overrides in the device config will apply afterwards. This means configure's mkspec parsing will be able to read the QMAKE_MAC_SDK. Change-Id: I0c7e26a6a0103e19b23ef152aa9e4ab461cee632 Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com> Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
2013-03-02 14:46:37 +00:00
support relative paths in QMAKE_RPATHDIR ... and make use of it in qt.prf. [ChangeLog][qmake][Unix] Added support for relative paths in QMAKE_RPATHDIR. Note that this technically breaks backwards compatibility, as relative paths were previously silently resolved against $$_PRO_FILE_PWD_. This was not documented and seems rather useless, so i'm not worried. Change-Id: I855042a8962ab34ad4617899a5b9825af0087f8a Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com> Reviewed-by: Jake Petroules <jake.petroules@theqtcompany.com> Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
2015-09-29 18:06:05 +00:00
QMAKE_LFLAGS_REL_RPATH =
QMAKE_REL_RPATH_BASE = @loader_path
Fix '=' alignment and replace tabs in *.conf (whitespace only change) Replace all tabs with proper space characters and consistently align the '=' characters. The default alignment for the '=' of 25 characters has been left as is to get a minimal diff. Lines with the '=' further to the right and those belonging to 'proper code (TM)' have not been touched. The work was mostly done using the following python script (might come in handy again...): import sys, re indent_eq = 25 + 0*4 # 25 characters was the most widely used indentation for the '=' character p = re.compile(r'(\w+)[ \t]*([\-\+]?)(=$|= )[ \t]*(.*$)') for fn in sys.argv[1:]: with open(fn, 'r+') as f: lines = [] nl_count = 0 continuity_indent = None for l in f: m = p.match(l) nl = l if m: n_spaces = max(m.start(3), indent_eq - 1) - len(m.group(2)) - len(m.group(1)) if m.group(2) and m.start(2) >= indent_eq-1 and m.start(2) % 4 == 0: n_spaces -= 1 # left-shift '+=' by one if the '+' is aligned to a multiple of 4 n_spaces = max(1, n_spaces) # we want at least one space before '='/'+=' nl = m.group(1) + ' '*n_spaces + ''.join(m.group(2,3,4)) + '\n' continuity_indent = nl.find('= ') + 2 if l[-2] == '\\' else None # remember indent on '\\$' elif continuity_indent: nl = ' '*continuity_indent + l.lstrip() if l[-2] != '\\': # check when to stop the continuation continuity_indent = None elif l.startswith('#'): nl = l.expandtabs(2) if l != nl: nl_count += 1 lines.append(nl) if nl_count > 0: print fn, nl_count, len(lines) f.seek(0) f.writelines(lines) f.truncate() Change-Id: I1d2870d0a2fe2e30d398c140fe523e69dd20c81b Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
2013-03-19 01:57:31 +00:00
QMAKE_LIBS_DYNLOAD =
QMAKE_LIBS_OPENGL = -framework OpenGL -framework AGL
QMAKE_LIBS_THREAD =
Distinguish between 'mac' and 'macx' qmake scopes The former applies both on Mac OS X and iOS, but 'macx' is specific to Mac OS X. ios.conf and macx.conf now share most of their settings in the common mac.conf. We set the default QMAKE_MAC_SDK before loading mac.conf, so that any overrides in the device config will apply afterwards. This means configure's mkspec parsing will be able to read the QMAKE_MAC_SDK. Change-Id: I0c7e26a6a0103e19b23ef152aa9e4ab461cee632 Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com> Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
2013-03-02 14:46:37 +00:00
Add support for building QtWayland on macOS Change-Id: Ibed63a01abf32e10a31c610996ae93d3bd9ce153 Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io> Reviewed-by: Paul Olav Tvete <paul.tvete@qt.io>
2018-05-17 10:58:53 +00:00
QMAKE_INCDIR_WAYLAND =
QMAKE_LIBS_WAYLAND_CLIENT = -lwayland-client
QMAKE_LIBS_WAYLAND_SERVER = -lwayland-server
QMAKE_LIBDIR_WAYLAND =
QMAKE_DEFINES_WAYLAND =
QMAKE_WAYLAND_SCANNER = wayland-scanner
Add the ability for qmake to build Xcode asset catalogs This essentially emulates Xcode behavior for QMAKE_BUNDLE_DATA. This is mostly for our own internal use. No documentation is provided. Variables introduced: - QMAKE_ASSET_CATALOGS - QMAKE_ASSET_CATALOGS_APP_ICON - QMAKE_ASSET_CATALOGS_BUILD_PATH - QMAKE_ASSET_CATALOGS_INSTALL_PATH Change-Id: I9577415d637f022d05f301c5a0d799483cd2a963 Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
2016-05-04 09:08:44 +00:00
QMAKE_ACTOOL = actool
qmake: Add support for separate debug info on Apple platforms. This makes the -separate-debug-info configure optional functional, which generates dSYM debug info bundles for Qt libraries on Apple platforms. Task-number: QTBUG-37952 Done-with: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com> Change-Id: Ia247674740bf450130a15db926df07fa9007e2ca Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
2016-04-07 03:37:44 +00:00
QMAKE_DSYMUTIL = dsymutil
mkspecs: Allow specifying a CROSS_COMPILE for mac/clang targets This allows distinguishing between these tools and tools for the host, when cross compiling. While mac tools normally only are available on macOS, there are third party efforts to port them to other platforms. In these cases, it might be useful to use a prefix (either some sort of triplet prefix, or an absolute path) to distinguish between the host build platform compilers/tools and the ones for the cross target. The use of this variable matches the one used in a lot of other mkspecs, and shouldn't cause any issues for those who aren't setting it. Change-Id: Iaeba571d955ea79ed1249989fcc525eb1eaf1f5c Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io> Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
2018-06-14 12:54:37 +00:00
QMAKE_STRIP = $${CROSS_COMPILE}strip
Set library strip flags on Apple platforms This was missed in ab599a39313c22fd14cc5466cea5c61bbcdbba8e when QMAKE_STRIP was set as a side effect of adding support for separate debug info. Task-number: QTBUG-54212 Change-Id: I86dd040dbefec4c58879c7d029ed89dd8bad3daf Reviewed-by: Thiago Macieira <thiago.macieira@intel.com> Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
2016-06-23 23:16:06 +00:00
QMAKE_STRIPFLAGS_LIB += -S -x
qmake: Add support for separate debug info on Apple platforms. This makes the -separate-debug-info configure optional functional, which generates dSYM debug info bundles for Qt libraries on Apple platforms. Task-number: QTBUG-37952 Done-with: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com> Change-Id: Ia247674740bf450130a15db926df07fa9007e2ca Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
2016-04-07 03:37:44 +00:00
mkspecs: Allow specifying a CROSS_COMPILE for mac/clang targets This allows distinguishing between these tools and tools for the host, when cross compiling. While mac tools normally only are available on macOS, there are third party efforts to port them to other platforms. In these cases, it might be useful to use a prefix (either some sort of triplet prefix, or an absolute path) to distinguish between the host build platform compilers/tools and the ones for the cross target. The use of this variable matches the one used in a lot of other mkspecs, and shouldn't cause any issues for those who aren't setting it. Change-Id: Iaeba571d955ea79ed1249989fcc525eb1eaf1f5c Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io> Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
2018-06-14 12:54:37 +00:00
QMAKE_AR = $${CROSS_COMPILE}ar cq
QMAKE_RANLIB = $${CROSS_COMPILE}ranlib -s
QMAKE_NM = $${CROSS_COMPILE}nm -P
Reference in New Issue Copy Permalink