Implement developer / non-prefix builds
A non-prefix build is a build where you don't have to run
make install.
To do a non-prefix build, pass -DFEATURE_developer_build=ON when
invoking CMake on qtbase. Note that this of course also enables
developer build features (private tests, etc).
When doing a non-prefix build, the CMAKE_INSTALL_PREFIX cache variable
will point to the qtbase build directory.
Tests can be run without installing Qt (QPA plugins are picked up from
the build dir).
This patch stops installation of any files by forcing the
make "install" target be a no-op.
When invoking cmake on the qtsvg module (or any other module),
the CMAKE_INSTALL_PREFIX variable should be set to the qtbase build
directory.
The developer-build feature is propagated via the QtCore Config file,
so that when building other modules, you don't have to specify it
on the command line again.
As a result of the change, all libraries, plugins, tools, include dirs,
CMake Config files, CMake Targets files, Macro files, etc,
will be placed in the qtbase build directory, mimicking the file layout
of an installed Qt file layout.
Only examples and tests are kept in the separate module build
directories, which is equivalent to how qmake does it.
The following global variables contain paths for the
appropriate prefix or non prefix builds:
QT_BUILD_DIR, QT_INSTALL_DIR, QT_CONFIG_BUILD_DIR,
QT_CONFIG_INSTALL_DIR. These should be used by developers
when deciding where files should be placed.
All usages of install() are replaced by qt_install(), which has some
additional logic on how to handle associationg of CMake targets to
export names.
When installing files, some consideration should be taken if
qt_copy_or_install() needs to be used instead of qt_install(),
which takes care of copying files from the source dir to the build dir
when doing non-prefix builds.
Tested with qtbase and qtsvg, developer builds, non-developer builds
and static developer builds on Windows, Linux and macOS.
Task-number: QTBUG-75581
Change-Id: I0ed27fb6467662dd24fb23aee6b95dd2c9c4061f
Reviewed-by: Kevin Funk <kevin.funk@kdab.com>
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
2019-05-08 12:45:41 +00:00
|
|
|
set(__GlobalConfig_path_suffix "${INSTALL_CMAKE_NAMESPACE}")
|
|
|
|
|
qt_path_join(__GlobalConfig_build_dir ${QT_CONFIG_BUILD_DIR} ${__GlobalConfig_path_suffix})
|
|
|
|
|
qt_path_join(__GlobalConfig_install_dir ${QT_CONFIG_INSTALL_DIR} ${__GlobalConfig_path_suffix})
|
2019-07-03 14:40:01 +00:00
|
|
|
set(__GlobalConfig_install_dir_absolute "${__GlobalConfig_install_dir}")
|
CMake: Make build system of installed Qt more relocatable
Aka handle CMAKE_INSTALL_PREFIX in a more relocatable way.
The following story inspired this change.
If a user wants to build a Qt repo into a different install prefix
than the usual Qt one, this will fail configuration because we
look for various things like syncqt, qdoc, etc relative to
CMAKE_INSTALL_PREFIX, which will now point to a different location
where none of the above tools are located.
The intent for such a use case is to support building Qt packages with
Conan, which sets a random install prefix when configuring a repo.
The idea is to derive the qt prefix dynamically from the
QtBuildInternals package location. Essentially it's a reverse relative
path from the QtBuildInternalsConfig.cmake file to the install prefix
that was specified when initially configuring qtbase.
Once the dynamic prefix is computed (so we know where the possibly
relocated Qt is), we can find tools like syncqt and qdoc.
This is an initial attempt to support a use case like that.
More design work will probably needed in case if tools / libs need to
be found in a location different than the Qt install prefix (so
support for multiple install prefixes / search paths).
An example of such a case would be when building qtdeclarative and
qtquickcontrols2 as Conan packages in one go. Most likely the
qmltyperegistrar tool will be located in the random install prefix
set by Conan, so building qtquickcontrols2 might fail due to not
finding the tool in the original Qt install prefix.
As to the implementation details, the change does the following:
- Dynamically computes and sets the
QT_BUILD_INTERNALS_RELOCATABLE_INSTALL_PREFIX variable when
find_package()'ing QtBuildInternals. It's an absolute path
pointing to where the relocated Qt is.
- When building qtbase this variable is not yet available (due
to QtBuildInternalsExtra not existing), in that case we set
the variable to the absolute path of CMAKE_INSTALL_PREFIX
(but only for the initial qtbase configuration).
- Remove QT_BUILD_INTERNALS_ORIGINAL_INSTALL_PREFIX which was used
for standalone tests purposes. It's not needed now that we compute
the location of the Qt prefix dynamically.
- The Unixy qt-cmake and qt-cmake-private shell scripts now
use a relative path to find the toolchain file we created.
- The toolchain file also dynamically computes the location of the Qt
packages, and adds them to CMAKE_PREFIX_PATH.
- A lot of existing CMAKE_INSTALL_PREFIX uses are replaced with
QT_BUILD_INTERNALS_RELOCATABLE_INSTALL_PREFIX. This includes finding
tool locations, mkspecs dir, path environment setup for tools, etc.
- Some places still use CMAKE_PREFIX_PATH in the following cases
- When determining paths while configuring qtbase (valid cases)
- When I wasn't sure what the behavior should be, so I left them
as-is (an example is documentation generation, do we want to
install it into the random Conan prefix, or into the main prefix?
Currently it installs in the random prefix).
Note that relocating a Qt installation does not work for non-prefix /
non-installed builds, due to hardcoded paths to include directories
and libraries in generated FooTargets.cmake files.
Task-number: QTBUG-83999
Change-Id: I87d6558729db93121b1715771034b03ce3295923
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
2020-05-05 08:30:35 +00:00
|
|
|
set(__qt_bin_dir_absolute "${QT_INSTALL_DIR}/${INSTALL_BINDIR}")
|
2021-04-26 13:45:29 +00:00
|
|
|
set(__qt_libexec_dir_absolute "${QT_INSTALL_DIR}/${INSTALL_LIBEXECDIR}")
|
2019-07-03 14:40:01 +00:00
|
|
|
if(QT_WILL_INSTALL)
|
|
|
|
|
# Need to prepend the install prefix when doing prefix builds, because the config install dir
|
|
|
|
|
# is relative then.
|
|
|
|
|
qt_path_join(__GlobalConfig_install_dir_absolute
|
CMake: Make build system of installed Qt more relocatable
Aka handle CMAKE_INSTALL_PREFIX in a more relocatable way.
The following story inspired this change.
If a user wants to build a Qt repo into a different install prefix
than the usual Qt one, this will fail configuration because we
look for various things like syncqt, qdoc, etc relative to
CMAKE_INSTALL_PREFIX, which will now point to a different location
where none of the above tools are located.
The intent for such a use case is to support building Qt packages with
Conan, which sets a random install prefix when configuring a repo.
The idea is to derive the qt prefix dynamically from the
QtBuildInternals package location. Essentially it's a reverse relative
path from the QtBuildInternalsConfig.cmake file to the install prefix
that was specified when initially configuring qtbase.
Once the dynamic prefix is computed (so we know where the possibly
relocated Qt is), we can find tools like syncqt and qdoc.
This is an initial attempt to support a use case like that.
More design work will probably needed in case if tools / libs need to
be found in a location different than the Qt install prefix (so
support for multiple install prefixes / search paths).
An example of such a case would be when building qtdeclarative and
qtquickcontrols2 as Conan packages in one go. Most likely the
qmltyperegistrar tool will be located in the random install prefix
set by Conan, so building qtquickcontrols2 might fail due to not
finding the tool in the original Qt install prefix.
As to the implementation details, the change does the following:
- Dynamically computes and sets the
QT_BUILD_INTERNALS_RELOCATABLE_INSTALL_PREFIX variable when
find_package()'ing QtBuildInternals. It's an absolute path
pointing to where the relocated Qt is.
- When building qtbase this variable is not yet available (due
to QtBuildInternalsExtra not existing), in that case we set
the variable to the absolute path of CMAKE_INSTALL_PREFIX
(but only for the initial qtbase configuration).
- Remove QT_BUILD_INTERNALS_ORIGINAL_INSTALL_PREFIX which was used
for standalone tests purposes. It's not needed now that we compute
the location of the Qt prefix dynamically.
- The Unixy qt-cmake and qt-cmake-private shell scripts now
use a relative path to find the toolchain file we created.
- The toolchain file also dynamically computes the location of the Qt
packages, and adds them to CMAKE_PREFIX_PATH.
- A lot of existing CMAKE_INSTALL_PREFIX uses are replaced with
QT_BUILD_INTERNALS_RELOCATABLE_INSTALL_PREFIX. This includes finding
tool locations, mkspecs dir, path environment setup for tools, etc.
- Some places still use CMAKE_PREFIX_PATH in the following cases
- When determining paths while configuring qtbase (valid cases)
- When I wasn't sure what the behavior should be, so I left them
as-is (an example is documentation generation, do we want to
install it into the random Conan prefix, or into the main prefix?
Currently it installs in the random prefix).
Note that relocating a Qt installation does not work for non-prefix /
non-installed builds, due to hardcoded paths to include directories
and libraries in generated FooTargets.cmake files.
Task-number: QTBUG-83999
Change-Id: I87d6558729db93121b1715771034b03ce3295923
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
2020-05-05 08:30:35 +00:00
|
|
|
${QT_BUILD_INTERNALS_RELOCATABLE_INSTALL_PREFIX}
|
|
|
|
|
${__GlobalConfig_install_dir_absolute})
|
|
|
|
|
qt_path_join(__qt_bin_dir_absolute
|
|
|
|
|
${QT_BUILD_INTERNALS_RELOCATABLE_INSTALL_PREFIX} ${__qt_bin_dir_absolute})
|
2021-04-26 13:45:29 +00:00
|
|
|
qt_path_join(__qt_libexec_dir_absolute
|
|
|
|
|
${QT_BUILD_INTERNALS_RELOCATABLE_INSTALL_PREFIX} ${__qt_libexec_dir_absolute})
|
2019-07-03 14:40:01 +00:00
|
|
|
endif()
|
CMake: Make build system of installed Qt more relocatable
Aka handle CMAKE_INSTALL_PREFIX in a more relocatable way.
The following story inspired this change.
If a user wants to build a Qt repo into a different install prefix
than the usual Qt one, this will fail configuration because we
look for various things like syncqt, qdoc, etc relative to
CMAKE_INSTALL_PREFIX, which will now point to a different location
where none of the above tools are located.
The intent for such a use case is to support building Qt packages with
Conan, which sets a random install prefix when configuring a repo.
The idea is to derive the qt prefix dynamically from the
QtBuildInternals package location. Essentially it's a reverse relative
path from the QtBuildInternalsConfig.cmake file to the install prefix
that was specified when initially configuring qtbase.
Once the dynamic prefix is computed (so we know where the possibly
relocated Qt is), we can find tools like syncqt and qdoc.
This is an initial attempt to support a use case like that.
More design work will probably needed in case if tools / libs need to
be found in a location different than the Qt install prefix (so
support for multiple install prefixes / search paths).
An example of such a case would be when building qtdeclarative and
qtquickcontrols2 as Conan packages in one go. Most likely the
qmltyperegistrar tool will be located in the random install prefix
set by Conan, so building qtquickcontrols2 might fail due to not
finding the tool in the original Qt install prefix.
As to the implementation details, the change does the following:
- Dynamically computes and sets the
QT_BUILD_INTERNALS_RELOCATABLE_INSTALL_PREFIX variable when
find_package()'ing QtBuildInternals. It's an absolute path
pointing to where the relocated Qt is.
- When building qtbase this variable is not yet available (due
to QtBuildInternalsExtra not existing), in that case we set
the variable to the absolute path of CMAKE_INSTALL_PREFIX
(but only for the initial qtbase configuration).
- Remove QT_BUILD_INTERNALS_ORIGINAL_INSTALL_PREFIX which was used
for standalone tests purposes. It's not needed now that we compute
the location of the Qt prefix dynamically.
- The Unixy qt-cmake and qt-cmake-private shell scripts now
use a relative path to find the toolchain file we created.
- The toolchain file also dynamically computes the location of the Qt
packages, and adds them to CMAKE_PREFIX_PATH.
- A lot of existing CMAKE_INSTALL_PREFIX uses are replaced with
QT_BUILD_INTERNALS_RELOCATABLE_INSTALL_PREFIX. This includes finding
tool locations, mkspecs dir, path environment setup for tools, etc.
- Some places still use CMAKE_PREFIX_PATH in the following cases
- When determining paths while configuring qtbase (valid cases)
- When I wasn't sure what the behavior should be, so I left them
as-is (an example is documentation generation, do we want to
install it into the random Conan prefix, or into the main prefix?
Currently it installs in the random prefix).
Note that relocating a Qt installation does not work for non-prefix /
non-installed builds, due to hardcoded paths to include directories
and libraries in generated FooTargets.cmake files.
Task-number: QTBUG-83999
Change-Id: I87d6558729db93121b1715771034b03ce3295923
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
2020-05-05 08:30:35 +00:00
|
|
|
# Compute relative path from $qt_prefix/bin dir to global CMake config install dir, to use in the
|
|
|
|
|
# unix-y qt-cmake shell script, to make it work even if the installed Qt is relocated.
|
|
|
|
|
file(RELATIVE_PATH
|
|
|
|
|
__GlobalConfig_relative_path_from_bin_dir_to_cmake_config_dir
|
|
|
|
|
${__qt_bin_dir_absolute} ${__GlobalConfig_install_dir_absolute})
|
2018-10-24 13:20:27 +00:00
|
|
|
|
2019-06-14 10:59:07 +00:00
|
|
|
# Generate and install Qt6 config file.
|
2020-11-30 07:46:49 +00:00
|
|
|
qt_internal_get_min_new_policy_cmake_version(min_new_policy_version)
|
|
|
|
|
qt_internal_get_max_new_policy_cmake_version(max_new_policy_version)
|
2018-10-24 13:20:27 +00:00
|
|
|
configure_package_config_file(
|
|
|
|
|
"${PROJECT_SOURCE_DIR}/cmake/QtConfig.cmake.in"
|
Implement developer / non-prefix builds
A non-prefix build is a build where you don't have to run
make install.
To do a non-prefix build, pass -DFEATURE_developer_build=ON when
invoking CMake on qtbase. Note that this of course also enables
developer build features (private tests, etc).
When doing a non-prefix build, the CMAKE_INSTALL_PREFIX cache variable
will point to the qtbase build directory.
Tests can be run without installing Qt (QPA plugins are picked up from
the build dir).
This patch stops installation of any files by forcing the
make "install" target be a no-op.
When invoking cmake on the qtsvg module (or any other module),
the CMAKE_INSTALL_PREFIX variable should be set to the qtbase build
directory.
The developer-build feature is propagated via the QtCore Config file,
so that when building other modules, you don't have to specify it
on the command line again.
As a result of the change, all libraries, plugins, tools, include dirs,
CMake Config files, CMake Targets files, Macro files, etc,
will be placed in the qtbase build directory, mimicking the file layout
of an installed Qt file layout.
Only examples and tests are kept in the separate module build
directories, which is equivalent to how qmake does it.
The following global variables contain paths for the
appropriate prefix or non prefix builds:
QT_BUILD_DIR, QT_INSTALL_DIR, QT_CONFIG_BUILD_DIR,
QT_CONFIG_INSTALL_DIR. These should be used by developers
when deciding where files should be placed.
All usages of install() are replaced by qt_install(), which has some
additional logic on how to handle associationg of CMake targets to
export names.
When installing files, some consideration should be taken if
qt_copy_or_install() needs to be used instead of qt_install(),
which takes care of copying files from the source dir to the build dir
when doing non-prefix builds.
Tested with qtbase and qtsvg, developer builds, non-developer builds
and static developer builds on Windows, Linux and macOS.
Task-number: QTBUG-75581
Change-Id: I0ed27fb6467662dd24fb23aee6b95dd2c9c4061f
Reviewed-by: Kevin Funk <kevin.funk@kdab.com>
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
2019-05-08 12:45:41 +00:00
|
|
|
"${__GlobalConfig_build_dir}/${INSTALL_CMAKE_NAMESPACE}Config.cmake"
|
|
|
|
|
INSTALL_DESTINATION "${__GlobalConfig_install_dir}"
|
2018-10-24 13:20:27 +00:00
|
|
|
)
|
Implement developer / non-prefix builds
A non-prefix build is a build where you don't have to run
make install.
To do a non-prefix build, pass -DFEATURE_developer_build=ON when
invoking CMake on qtbase. Note that this of course also enables
developer build features (private tests, etc).
When doing a non-prefix build, the CMAKE_INSTALL_PREFIX cache variable
will point to the qtbase build directory.
Tests can be run without installing Qt (QPA plugins are picked up from
the build dir).
This patch stops installation of any files by forcing the
make "install" target be a no-op.
When invoking cmake on the qtsvg module (or any other module),
the CMAKE_INSTALL_PREFIX variable should be set to the qtbase build
directory.
The developer-build feature is propagated via the QtCore Config file,
so that when building other modules, you don't have to specify it
on the command line again.
As a result of the change, all libraries, plugins, tools, include dirs,
CMake Config files, CMake Targets files, Macro files, etc,
will be placed in the qtbase build directory, mimicking the file layout
of an installed Qt file layout.
Only examples and tests are kept in the separate module build
directories, which is equivalent to how qmake does it.
The following global variables contain paths for the
appropriate prefix or non prefix builds:
QT_BUILD_DIR, QT_INSTALL_DIR, QT_CONFIG_BUILD_DIR,
QT_CONFIG_INSTALL_DIR. These should be used by developers
when deciding where files should be placed.
All usages of install() are replaced by qt_install(), which has some
additional logic on how to handle associationg of CMake targets to
export names.
When installing files, some consideration should be taken if
qt_copy_or_install() needs to be used instead of qt_install(),
which takes care of copying files from the source dir to the build dir
when doing non-prefix builds.
Tested with qtbase and qtsvg, developer builds, non-developer builds
and static developer builds on Windows, Linux and macOS.
Task-number: QTBUG-75581
Change-Id: I0ed27fb6467662dd24fb23aee6b95dd2c9c4061f
Reviewed-by: Kevin Funk <kevin.funk@kdab.com>
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
2019-05-08 12:45:41 +00:00
|
|
|
|
2018-10-24 13:20:27 +00:00
|
|
|
write_basic_package_version_file(
|
Implement developer / non-prefix builds
A non-prefix build is a build where you don't have to run
make install.
To do a non-prefix build, pass -DFEATURE_developer_build=ON when
invoking CMake on qtbase. Note that this of course also enables
developer build features (private tests, etc).
When doing a non-prefix build, the CMAKE_INSTALL_PREFIX cache variable
will point to the qtbase build directory.
Tests can be run without installing Qt (QPA plugins are picked up from
the build dir).
This patch stops installation of any files by forcing the
make "install" target be a no-op.
When invoking cmake on the qtsvg module (or any other module),
the CMAKE_INSTALL_PREFIX variable should be set to the qtbase build
directory.
The developer-build feature is propagated via the QtCore Config file,
so that when building other modules, you don't have to specify it
on the command line again.
As a result of the change, all libraries, plugins, tools, include dirs,
CMake Config files, CMake Targets files, Macro files, etc,
will be placed in the qtbase build directory, mimicking the file layout
of an installed Qt file layout.
Only examples and tests are kept in the separate module build
directories, which is equivalent to how qmake does it.
The following global variables contain paths for the
appropriate prefix or non prefix builds:
QT_BUILD_DIR, QT_INSTALL_DIR, QT_CONFIG_BUILD_DIR,
QT_CONFIG_INSTALL_DIR. These should be used by developers
when deciding where files should be placed.
All usages of install() are replaced by qt_install(), which has some
additional logic on how to handle associationg of CMake targets to
export names.
When installing files, some consideration should be taken if
qt_copy_or_install() needs to be used instead of qt_install(),
which takes care of copying files from the source dir to the build dir
when doing non-prefix builds.
Tested with qtbase and qtsvg, developer builds, non-developer builds
and static developer builds on Windows, Linux and macOS.
Task-number: QTBUG-75581
Change-Id: I0ed27fb6467662dd24fb23aee6b95dd2c9c4061f
Reviewed-by: Kevin Funk <kevin.funk@kdab.com>
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
2019-05-08 12:45:41 +00:00
|
|
|
${__GlobalConfig_build_dir}/${INSTALL_CMAKE_NAMESPACE}ConfigVersion.cmake
|
2018-10-24 13:20:27 +00:00
|
|
|
VERSION ${PROJECT_VERSION}
|
|
|
|
|
COMPATIBILITY AnyNewerVersion
|
|
|
|
|
)
|
|
|
|
|
|
Implement developer / non-prefix builds
A non-prefix build is a build where you don't have to run
make install.
To do a non-prefix build, pass -DFEATURE_developer_build=ON when
invoking CMake on qtbase. Note that this of course also enables
developer build features (private tests, etc).
When doing a non-prefix build, the CMAKE_INSTALL_PREFIX cache variable
will point to the qtbase build directory.
Tests can be run without installing Qt (QPA plugins are picked up from
the build dir).
This patch stops installation of any files by forcing the
make "install" target be a no-op.
When invoking cmake on the qtsvg module (or any other module),
the CMAKE_INSTALL_PREFIX variable should be set to the qtbase build
directory.
The developer-build feature is propagated via the QtCore Config file,
so that when building other modules, you don't have to specify it
on the command line again.
As a result of the change, all libraries, plugins, tools, include dirs,
CMake Config files, CMake Targets files, Macro files, etc,
will be placed in the qtbase build directory, mimicking the file layout
of an installed Qt file layout.
Only examples and tests are kept in the separate module build
directories, which is equivalent to how qmake does it.
The following global variables contain paths for the
appropriate prefix or non prefix builds:
QT_BUILD_DIR, QT_INSTALL_DIR, QT_CONFIG_BUILD_DIR,
QT_CONFIG_INSTALL_DIR. These should be used by developers
when deciding where files should be placed.
All usages of install() are replaced by qt_install(), which has some
additional logic on how to handle associationg of CMake targets to
export names.
When installing files, some consideration should be taken if
qt_copy_or_install() needs to be used instead of qt_install(),
which takes care of copying files from the source dir to the build dir
when doing non-prefix builds.
Tested with qtbase and qtsvg, developer builds, non-developer builds
and static developer builds on Windows, Linux and macOS.
Task-number: QTBUG-75581
Change-Id: I0ed27fb6467662dd24fb23aee6b95dd2c9c4061f
Reviewed-by: Kevin Funk <kevin.funk@kdab.com>
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
2019-05-08 12:45:41 +00:00
|
|
|
qt_install(FILES
|
|
|
|
|
"${__GlobalConfig_build_dir}/${INSTALL_CMAKE_NAMESPACE}Config.cmake"
|
|
|
|
|
"${__GlobalConfig_build_dir}/${INSTALL_CMAKE_NAMESPACE}ConfigVersion.cmake"
|
|
|
|
|
DESTINATION "${__GlobalConfig_install_dir}"
|
|
|
|
|
COMPONENT Devel
|
|
|
|
|
)
|
|
|
|
|
|
2020-03-18 18:09:00 +00:00
|
|
|
# Configure and install the QtBuildInternals package.
|
|
|
|
|
set(__build_internals_path_suffix "${INSTALL_CMAKE_NAMESPACE}BuildInternals")
|
|
|
|
|
qt_path_join(__build_internals_build_dir ${QT_CONFIG_BUILD_DIR} ${__build_internals_path_suffix})
|
|
|
|
|
qt_path_join(__build_internals_install_dir ${QT_CONFIG_INSTALL_DIR}
|
|
|
|
|
${__build_internals_path_suffix})
|
|
|
|
|
set(__build_internals_standalone_test_template_dir "QtStandaloneTestTemplateProject")
|
|
|
|
|
|
|
|
|
|
configure_file(
|
|
|
|
|
"${CMAKE_CURRENT_SOURCE_DIR}/cmake/QtBuildInternals/QtBuildInternalsConfig.cmake"
|
|
|
|
|
"${__build_internals_build_dir}/${INSTALL_CMAKE_NAMESPACE}BuildInternalsConfig.cmake"
|
|
|
|
|
@ONLY
|
|
|
|
|
)
|
|
|
|
|
|
|
|
|
|
qt_install(FILES
|
|
|
|
|
"${__build_internals_build_dir}/${INSTALL_CMAKE_NAMESPACE}BuildInternalsConfig.cmake"
|
|
|
|
|
"${__build_internals_build_dir}/QtBuildInternalsExtra.cmake"
|
|
|
|
|
DESTINATION "${__build_internals_install_dir}"
|
|
|
|
|
COMPONENT Devel
|
|
|
|
|
)
|
|
|
|
|
qt_copy_or_install(
|
|
|
|
|
DIRECTORY
|
|
|
|
|
"${CMAKE_CURRENT_SOURCE_DIR}/cmake/QtBuildInternals/${__build_internals_standalone_test_template_dir}"
|
|
|
|
|
DESTINATION "${__build_internals_install_dir}")
|
|
|
|
|
|
|
|
|
|
set_property(DIRECTORY APPEND PROPERTY CMAKE_CONFIGURE_DEPENDS
|
|
|
|
|
"${CMAKE_CURRENT_SOURCE_DIR}/cmake/QtBuildInternals/${__build_internals_standalone_test_template_dir}/CMakeLists.txt")
|
|
|
|
|
|
2020-10-12 08:55:18 +00:00
|
|
|
include(QtToolchainHelpers)
|
|
|
|
|
qt_internal_create_toolchain_file()
|
2019-06-21 12:58:52 +00:00
|
|
|
|
2020-10-12 08:55:18 +00:00
|
|
|
include(QtWrapperScriptHelpers)
|
|
|
|
|
qt_internal_create_wrapper_scripts()
|
2020-05-15 09:38:53 +00:00
|
|
|
|
2018-10-24 13:20:27 +00:00
|
|
|
## Library to hold global features:
|
2019-01-10 09:50:38 +00:00
|
|
|
## These features are stored and accessed via Qt::GlobalConfig, but the
|
|
|
|
|
## files always lived in Qt::Core, so we keep it that way
|
|
|
|
|
add_library(GlobalConfig INTERFACE)
|
|
|
|
|
target_include_directories(GlobalConfig INTERFACE
|
2020-08-06 07:56:58 +00:00
|
|
|
$<BUILD_INTERFACE:${PROJECT_BINARY_DIR}/include>
|
|
|
|
|
$<BUILD_INTERFACE:${PROJECT_BINARY_DIR}/include/QtCore>
|
2020-05-05 14:57:58 +00:00
|
|
|
$<INSTALL_INTERFACE:${INSTALL_INCLUDEDIR}>
|
|
|
|
|
$<INSTALL_INTERFACE:${INSTALL_INCLUDEDIR}/QtCore>
|
2019-01-10 09:50:38 +00:00
|
|
|
)
|
2019-05-16 07:46:29 +00:00
|
|
|
qt_feature_module_begin(NO_MODULE
|
2018-10-24 13:20:27 +00:00
|
|
|
PUBLIC_FILE src/corelib/global/qconfig.h
|
|
|
|
|
PRIVATE_FILE src/corelib/global/qconfig_p.h
|
|
|
|
|
)
|
|
|
|
|
include("${CMAKE_CURRENT_SOURCE_DIR}/configure.cmake")
|
2019-04-08 15:23:57 +00:00
|
|
|
|
|
|
|
|
# Do what mkspecs/features/uikit/default_pre.prf does, aka enable sse2 for
|
|
|
|
|
# simulator_and_device_builds.
|
CMake: Fix building multi-arch universal macOS Qt
Use the same approach we use for iOS, which is to set multiple
CMAKE_OSX_ARCHITECTURES values and let the clang front end
deal with lipo-ing the final libraries.
For now, Qt can be configured to build universal macOS libraries by
passing 2 architectures to CMake, either via:
-DCMAKE_OSX_ARCHITECTURES="x86_64;arm64"
or
-DCMAKE_OSX_ARCHITECTURES="arm64;x86_64"
Currently we recommend specifying the intel x86_64 arch as the first
one, to get an intel slice configuration that is comparable to a
non-universal intel build.
Specifying the arm64 slice first could pessimize optimizations and
reduce the feature set for the intel slice due to the limitation
that we run configure tests only once.
The first specified architecture is the one used to do all the
configure tests.
It 'mostly' defines the common feature set of both architecture
slices, with the excepion of some special handling for sse2 and
neon instructions.
In the future we might want to run at least the Qt architecture config
test for all specified architectures, so that we can extract all the
supported sub-arches and instruction sets in a reliable way.
For now, we use the same sse2 hack as for iOS simulator_and_device
builds, otherwise QtGui fails to link due to missing
qt_memfill32_sse2 and other symbols.
The hack is somewhat augmented to ensure that reconfiguration
still succeeds (same issue happened with iOS). Previously the sse2
feature condition was broken due to force setting the feature
to be ON. Now the condition also checks for a special
QT_FORCE_FEATURE_sse2 variable which we set internally.
Note that we shouldn't build for arm64e, because the binaries
get killed when running on AS with the following message:
kernel: exec_mach_imgact: not running binary built against
preview arm64e ABI.
Aslo, by default, we disable the arm64 slice for qt sql plugins,
mostly because the CI provisioned sql libraries that we depend on only
contain x86_64 slices, and trying to build the sql plugins for both
slices will fail with linker errors.
This behavior can be disabled for all targets marked by
qt_internal_force_macos_intel_arch, by setting the
QT_FORCE_MACOS_ALL_ARCHES CMake option to ON.
To disble it per-target one can set
QT_FORCE_MACOS_ALL_ARCHES_${target} to ON.
Task-number: QTBUG-85447
Change-Id: Iccb5dfcc1a21a8a8292bd3817df0ea46c3445f75
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
2021-03-24 15:03:35 +00:00
|
|
|
|
|
|
|
|
qt_internal_get_first_osx_arch(__qt_osx_first_arch)
|
|
|
|
|
set(__qt_apple_silicon_arches "arm64;arm64e")
|
|
|
|
|
if((UIKIT AND NOT QT_UIKIT_SDK)
|
|
|
|
|
OR (MACOS AND QT_IS_MACOS_UNIVERSAL
|
|
|
|
|
AND __qt_osx_first_arch IN_LIST __qt_apple_silicon_arches))
|
|
|
|
|
set(QT_FORCE_FEATURE_sse2 ON CACHE INTERNAL "Force enable sse2 due to platform requirements.")
|
2019-04-08 15:23:57 +00:00
|
|
|
set(__QtFeature_custom_enabled_cache_variables
|
|
|
|
|
TEST_subarch_sse2
|
|
|
|
|
FEATURE_sse2
|
|
|
|
|
QT_FEATURE_sse2)
|
|
|
|
|
endif()
|
|
|
|
|
|
CMake: Fix building multi-arch universal macOS Qt
Use the same approach we use for iOS, which is to set multiple
CMAKE_OSX_ARCHITECTURES values and let the clang front end
deal with lipo-ing the final libraries.
For now, Qt can be configured to build universal macOS libraries by
passing 2 architectures to CMake, either via:
-DCMAKE_OSX_ARCHITECTURES="x86_64;arm64"
or
-DCMAKE_OSX_ARCHITECTURES="arm64;x86_64"
Currently we recommend specifying the intel x86_64 arch as the first
one, to get an intel slice configuration that is comparable to a
non-universal intel build.
Specifying the arm64 slice first could pessimize optimizations and
reduce the feature set for the intel slice due to the limitation
that we run configure tests only once.
The first specified architecture is the one used to do all the
configure tests.
It 'mostly' defines the common feature set of both architecture
slices, with the excepion of some special handling for sse2 and
neon instructions.
In the future we might want to run at least the Qt architecture config
test for all specified architectures, so that we can extract all the
supported sub-arches and instruction sets in a reliable way.
For now, we use the same sse2 hack as for iOS simulator_and_device
builds, otherwise QtGui fails to link due to missing
qt_memfill32_sse2 and other symbols.
The hack is somewhat augmented to ensure that reconfiguration
still succeeds (same issue happened with iOS). Previously the sse2
feature condition was broken due to force setting the feature
to be ON. Now the condition also checks for a special
QT_FORCE_FEATURE_sse2 variable which we set internally.
Note that we shouldn't build for arm64e, because the binaries
get killed when running on AS with the following message:
kernel: exec_mach_imgact: not running binary built against
preview arm64e ABI.
Aslo, by default, we disable the arm64 slice for qt sql plugins,
mostly because the CI provisioned sql libraries that we depend on only
contain x86_64 slices, and trying to build the sql plugins for both
slices will fail with linker errors.
This behavior can be disabled for all targets marked by
qt_internal_force_macos_intel_arch, by setting the
QT_FORCE_MACOS_ALL_ARCHES CMake option to ON.
To disble it per-target one can set
QT_FORCE_MACOS_ALL_ARCHES_${target} to ON.
Task-number: QTBUG-85447
Change-Id: Iccb5dfcc1a21a8a8292bd3817df0ea46c3445f75
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
2021-03-24 15:03:35 +00:00
|
|
|
if(MACOS AND QT_IS_MACOS_UNIVERSAL AND __qt_osx_first_arch STREQUAL "x86_64")
|
|
|
|
|
set(QT_FORCE_FEATURE_neon ON CACHE INTERNAL "Force enable neon due to platform requirements.")
|
|
|
|
|
set(__QtFeature_custom_enabled_cache_variables
|
|
|
|
|
TEST_subarch_neon
|
|
|
|
|
FEATURE_neon
|
|
|
|
|
QT_FEATURE_neon)
|
|
|
|
|
endif()
|
|
|
|
|
|
Implement developer / non-prefix builds
A non-prefix build is a build where you don't have to run
make install.
To do a non-prefix build, pass -DFEATURE_developer_build=ON when
invoking CMake on qtbase. Note that this of course also enables
developer build features (private tests, etc).
When doing a non-prefix build, the CMAKE_INSTALL_PREFIX cache variable
will point to the qtbase build directory.
Tests can be run without installing Qt (QPA plugins are picked up from
the build dir).
This patch stops installation of any files by forcing the
make "install" target be a no-op.
When invoking cmake on the qtsvg module (or any other module),
the CMAKE_INSTALL_PREFIX variable should be set to the qtbase build
directory.
The developer-build feature is propagated via the QtCore Config file,
so that when building other modules, you don't have to specify it
on the command line again.
As a result of the change, all libraries, plugins, tools, include dirs,
CMake Config files, CMake Targets files, Macro files, etc,
will be placed in the qtbase build directory, mimicking the file layout
of an installed Qt file layout.
Only examples and tests are kept in the separate module build
directories, which is equivalent to how qmake does it.
The following global variables contain paths for the
appropriate prefix or non prefix builds:
QT_BUILD_DIR, QT_INSTALL_DIR, QT_CONFIG_BUILD_DIR,
QT_CONFIG_INSTALL_DIR. These should be used by developers
when deciding where files should be placed.
All usages of install() are replaced by qt_install(), which has some
additional logic on how to handle associationg of CMake targets to
export names.
When installing files, some consideration should be taken if
qt_copy_or_install() needs to be used instead of qt_install(),
which takes care of copying files from the source dir to the build dir
when doing non-prefix builds.
Tested with qtbase and qtsvg, developer builds, non-developer builds
and static developer builds on Windows, Linux and macOS.
Task-number: QTBUG-75581
Change-Id: I0ed27fb6467662dd24fb23aee6b95dd2c9c4061f
Reviewed-by: Kevin Funk <kevin.funk@kdab.com>
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
2019-05-08 12:45:41 +00:00
|
|
|
qt_feature_module_end(GlobalConfig OUT_VAR_PREFIX "__GlobalConfig_")
|
2018-10-24 13:20:27 +00:00
|
|
|
|
2019-05-29 14:56:49 +00:00
|
|
|
qt_generate_global_config_pri_file()
|
2019-08-28 13:15:50 +00:00
|
|
|
qt_generate_global_module_pri_file()
|
2020-06-26 18:45:11 +00:00
|
|
|
qt_generate_global_device_pri_file()
|
2020-06-18 08:07:22 +00:00
|
|
|
qt_generate_qmake_wrapper_for_target()
|
2019-05-29 14:56:49 +00:00
|
|
|
|
2019-01-10 09:50:38 +00:00
|
|
|
add_library(Qt::GlobalConfig ALIAS GlobalConfig)
|
|
|
|
|
|
|
|
|
|
add_library(GlobalConfigPrivate INTERFACE)
|
|
|
|
|
target_link_libraries(GlobalConfigPrivate INTERFACE GlobalConfig)
|
|
|
|
|
target_include_directories(GlobalConfigPrivate INTERFACE
|
2020-08-06 07:56:58 +00:00
|
|
|
$<BUILD_INTERFACE:${PROJECT_BINARY_DIR}/include/QtCore/${PROJECT_VERSION}>
|
|
|
|
|
$<BUILD_INTERFACE:${PROJECT_BINARY_DIR}/include/QtCore/${PROJECT_VERSION}/QtCore>
|
2020-05-05 14:57:58 +00:00
|
|
|
$<INSTALL_INTERFACE:${INSTALL_INCLUDEDIR}/QtCore/${PROJECT_VERSION}>
|
|
|
|
|
$<INSTALL_INTERFACE:${INSTALL_INCLUDEDIR}/QtCore/${PROJECT_VERSION}/QtCore>
|
2019-01-10 09:50:38 +00:00
|
|
|
)
|
|
|
|
|
add_library(Qt::GlobalConfigPrivate ALIAS GlobalConfigPrivate)
|
|
|
|
|
|
2021-04-29 10:47:52 +00:00
|
|
|
include(QtPlatformTargetHelpers)
|
2020-10-12 08:55:18 +00:00
|
|
|
qt_internal_setup_public_platform_target()
|
2020-05-12 12:57:23 +00:00
|
|
|
|
2019-06-24 12:59:21 +00:00
|
|
|
# defines PlatformCommonInternal PlatformModuleInternal PlatformPluginInternal PlatformToolInternal
|
2019-06-05 14:05:50 +00:00
|
|
|
include(QtInternalTargets)
|
2021-06-03 11:51:48 +00:00
|
|
|
qt_internal_run_common_config_tests()
|
2019-06-05 14:05:50 +00:00
|
|
|
|
2019-06-24 12:59:21 +00:00
|
|
|
set(__export_targets Platform
|
|
|
|
|
GlobalConfig
|
|
|
|
|
GlobalConfigPrivate
|
|
|
|
|
PlatformCommonInternal
|
|
|
|
|
PlatformModuleInternal
|
|
|
|
|
PlatformPluginInternal
|
2020-07-27 08:17:04 +00:00
|
|
|
PlatformAppInternal
|
2019-06-24 12:59:21 +00:00
|
|
|
PlatformToolInternal)
|
Implement developer / non-prefix builds
A non-prefix build is a build where you don't have to run
make install.
To do a non-prefix build, pass -DFEATURE_developer_build=ON when
invoking CMake on qtbase. Note that this of course also enables
developer build features (private tests, etc).
When doing a non-prefix build, the CMAKE_INSTALL_PREFIX cache variable
will point to the qtbase build directory.
Tests can be run without installing Qt (QPA plugins are picked up from
the build dir).
This patch stops installation of any files by forcing the
make "install" target be a no-op.
When invoking cmake on the qtsvg module (or any other module),
the CMAKE_INSTALL_PREFIX variable should be set to the qtbase build
directory.
The developer-build feature is propagated via the QtCore Config file,
so that when building other modules, you don't have to specify it
on the command line again.
As a result of the change, all libraries, plugins, tools, include dirs,
CMake Config files, CMake Targets files, Macro files, etc,
will be placed in the qtbase build directory, mimicking the file layout
of an installed Qt file layout.
Only examples and tests are kept in the separate module build
directories, which is equivalent to how qmake does it.
The following global variables contain paths for the
appropriate prefix or non prefix builds:
QT_BUILD_DIR, QT_INSTALL_DIR, QT_CONFIG_BUILD_DIR,
QT_CONFIG_INSTALL_DIR. These should be used by developers
when deciding where files should be placed.
All usages of install() are replaced by qt_install(), which has some
additional logic on how to handle associationg of CMake targets to
export names.
When installing files, some consideration should be taken if
qt_copy_or_install() needs to be used instead of qt_install(),
which takes care of copying files from the source dir to the build dir
when doing non-prefix builds.
Tested with qtbase and qtsvg, developer builds, non-developer builds
and static developer builds on Windows, Linux and macOS.
Task-number: QTBUG-75581
Change-Id: I0ed27fb6467662dd24fb23aee6b95dd2c9c4061f
Reviewed-by: Kevin Funk <kevin.funk@kdab.com>
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
2019-05-08 12:45:41 +00:00
|
|
|
set(__export_name "${INSTALL_CMAKE_NAMESPACE}Targets")
|
|
|
|
|
qt_install(TARGETS ${__export_targets} EXPORT "${__export_name}")
|
|
|
|
|
qt_install(EXPORT ${__export_name}
|
|
|
|
|
NAMESPACE ${QT_CMAKE_EXPORT_NAMESPACE}::
|
|
|
|
|
DESTINATION "${__GlobalConfig_install_dir}")
|
2018-10-24 13:20:27 +00:00
|
|
|
|
Implement developer / non-prefix builds
A non-prefix build is a build where you don't have to run
make install.
To do a non-prefix build, pass -DFEATURE_developer_build=ON when
invoking CMake on qtbase. Note that this of course also enables
developer build features (private tests, etc).
When doing a non-prefix build, the CMAKE_INSTALL_PREFIX cache variable
will point to the qtbase build directory.
Tests can be run without installing Qt (QPA plugins are picked up from
the build dir).
This patch stops installation of any files by forcing the
make "install" target be a no-op.
When invoking cmake on the qtsvg module (or any other module),
the CMAKE_INSTALL_PREFIX variable should be set to the qtbase build
directory.
The developer-build feature is propagated via the QtCore Config file,
so that when building other modules, you don't have to specify it
on the command line again.
As a result of the change, all libraries, plugins, tools, include dirs,
CMake Config files, CMake Targets files, Macro files, etc,
will be placed in the qtbase build directory, mimicking the file layout
of an installed Qt file layout.
Only examples and tests are kept in the separate module build
directories, which is equivalent to how qmake does it.
The following global variables contain paths for the
appropriate prefix or non prefix builds:
QT_BUILD_DIR, QT_INSTALL_DIR, QT_CONFIG_BUILD_DIR,
QT_CONFIG_INSTALL_DIR. These should be used by developers
when deciding where files should be placed.
All usages of install() are replaced by qt_install(), which has some
additional logic on how to handle associationg of CMake targets to
export names.
When installing files, some consideration should be taken if
qt_copy_or_install() needs to be used instead of qt_install(),
which takes care of copying files from the source dir to the build dir
when doing non-prefix builds.
Tested with qtbase and qtsvg, developer builds, non-developer builds
and static developer builds on Windows, Linux and macOS.
Task-number: QTBUG-75581
Change-Id: I0ed27fb6467662dd24fb23aee6b95dd2c9c4061f
Reviewed-by: Kevin Funk <kevin.funk@kdab.com>
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
2019-05-08 12:45:41 +00:00
|
|
|
qt_internal_export_modern_cmake_config_targets_file(TARGETS ${__export_targets}
|
2019-05-03 10:30:09 +00:00
|
|
|
EXPORT_NAME_PREFIX ${INSTALL_CMAKE_NAMESPACE}
|
Implement developer / non-prefix builds
A non-prefix build is a build where you don't have to run
make install.
To do a non-prefix build, pass -DFEATURE_developer_build=ON when
invoking CMake on qtbase. Note that this of course also enables
developer build features (private tests, etc).
When doing a non-prefix build, the CMAKE_INSTALL_PREFIX cache variable
will point to the qtbase build directory.
Tests can be run without installing Qt (QPA plugins are picked up from
the build dir).
This patch stops installation of any files by forcing the
make "install" target be a no-op.
When invoking cmake on the qtsvg module (or any other module),
the CMAKE_INSTALL_PREFIX variable should be set to the qtbase build
directory.
The developer-build feature is propagated via the QtCore Config file,
so that when building other modules, you don't have to specify it
on the command line again.
As a result of the change, all libraries, plugins, tools, include dirs,
CMake Config files, CMake Targets files, Macro files, etc,
will be placed in the qtbase build directory, mimicking the file layout
of an installed Qt file layout.
Only examples and tests are kept in the separate module build
directories, which is equivalent to how qmake does it.
The following global variables contain paths for the
appropriate prefix or non prefix builds:
QT_BUILD_DIR, QT_INSTALL_DIR, QT_CONFIG_BUILD_DIR,
QT_CONFIG_INSTALL_DIR. These should be used by developers
when deciding where files should be placed.
All usages of install() are replaced by qt_install(), which has some
additional logic on how to handle associationg of CMake targets to
export names.
When installing files, some consideration should be taken if
qt_copy_or_install() needs to be used instead of qt_install(),
which takes care of copying files from the source dir to the build dir
when doing non-prefix builds.
Tested with qtbase and qtsvg, developer builds, non-developer builds
and static developer builds on Windows, Linux and macOS.
Task-number: QTBUG-75581
Change-Id: I0ed27fb6467662dd24fb23aee6b95dd2c9c4061f
Reviewed-by: Kevin Funk <kevin.funk@kdab.com>
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
2019-05-08 12:45:41 +00:00
|
|
|
CONFIG_INSTALL_DIR
|
|
|
|
|
${__GlobalConfig_install_dir})
|
2019-05-03 10:30:09 +00:00
|
|
|
|
2021-04-28 13:25:18 +00:00
|
|
|
# Install internal CMake files.
|
|
|
|
|
# The functions defined inside can not be used in public projects.
|
|
|
|
|
# They can only be used while building Qt itself.
|
Implement developer / non-prefix builds
A non-prefix build is a build where you don't have to run
make install.
To do a non-prefix build, pass -DFEATURE_developer_build=ON when
invoking CMake on qtbase. Note that this of course also enables
developer build features (private tests, etc).
When doing a non-prefix build, the CMAKE_INSTALL_PREFIX cache variable
will point to the qtbase build directory.
Tests can be run without installing Qt (QPA plugins are picked up from
the build dir).
This patch stops installation of any files by forcing the
make "install" target be a no-op.
When invoking cmake on the qtsvg module (or any other module),
the CMAKE_INSTALL_PREFIX variable should be set to the qtbase build
directory.
The developer-build feature is propagated via the QtCore Config file,
so that when building other modules, you don't have to specify it
on the command line again.
As a result of the change, all libraries, plugins, tools, include dirs,
CMake Config files, CMake Targets files, Macro files, etc,
will be placed in the qtbase build directory, mimicking the file layout
of an installed Qt file layout.
Only examples and tests are kept in the separate module build
directories, which is equivalent to how qmake does it.
The following global variables contain paths for the
appropriate prefix or non prefix builds:
QT_BUILD_DIR, QT_INSTALL_DIR, QT_CONFIG_BUILD_DIR,
QT_CONFIG_INSTALL_DIR. These should be used by developers
when deciding where files should be placed.
All usages of install() are replaced by qt_install(), which has some
additional logic on how to handle associationg of CMake targets to
export names.
When installing files, some consideration should be taken if
qt_copy_or_install() needs to be used instead of qt_install(),
which takes care of copying files from the source dir to the build dir
when doing non-prefix builds.
Tested with qtbase and qtsvg, developer builds, non-developer builds
and static developer builds on Windows, Linux and macOS.
Task-number: QTBUG-75581
Change-Id: I0ed27fb6467662dd24fb23aee6b95dd2c9c4061f
Reviewed-by: Kevin Funk <kevin.funk@kdab.com>
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
2019-05-08 12:45:41 +00:00
|
|
|
qt_copy_or_install(FILES
|
2019-09-24 09:42:15 +00:00
|
|
|
cmake/ModuleDescription.json.in
|
2020-03-23 13:43:02 +00:00
|
|
|
cmake/Qt3rdPartyLibraryConfig.cmake.in
|
2020-08-13 15:37:47 +00:00
|
|
|
cmake/Qt3rdPartyLibraryHelpers.cmake
|
2020-11-23 15:19:39 +00:00
|
|
|
cmake/QtAndroidHelpers.cmake
|
2020-08-13 15:37:47 +00:00
|
|
|
cmake/QtAppHelpers.cmake
|
|
|
|
|
cmake/QtAutogenHelpers.cmake
|
Implement developer / non-prefix builds
A non-prefix build is a build where you don't have to run
make install.
To do a non-prefix build, pass -DFEATURE_developer_build=ON when
invoking CMake on qtbase. Note that this of course also enables
developer build features (private tests, etc).
When doing a non-prefix build, the CMAKE_INSTALL_PREFIX cache variable
will point to the qtbase build directory.
Tests can be run without installing Qt (QPA plugins are picked up from
the build dir).
This patch stops installation of any files by forcing the
make "install" target be a no-op.
When invoking cmake on the qtsvg module (or any other module),
the CMAKE_INSTALL_PREFIX variable should be set to the qtbase build
directory.
The developer-build feature is propagated via the QtCore Config file,
so that when building other modules, you don't have to specify it
on the command line again.
As a result of the change, all libraries, plugins, tools, include dirs,
CMake Config files, CMake Targets files, Macro files, etc,
will be placed in the qtbase build directory, mimicking the file layout
of an installed Qt file layout.
Only examples and tests are kept in the separate module build
directories, which is equivalent to how qmake does it.
The following global variables contain paths for the
appropriate prefix or non prefix builds:
QT_BUILD_DIR, QT_INSTALL_DIR, QT_CONFIG_BUILD_DIR,
QT_CONFIG_INSTALL_DIR. These should be used by developers
when deciding where files should be placed.
All usages of install() are replaced by qt_install(), which has some
additional logic on how to handle associationg of CMake targets to
export names.
When installing files, some consideration should be taken if
qt_copy_or_install() needs to be used instead of qt_install(),
which takes care of copying files from the source dir to the build dir
when doing non-prefix builds.
Tested with qtbase and qtsvg, developer builds, non-developer builds
and static developer builds on Windows, Linux and macOS.
Task-number: QTBUG-75581
Change-Id: I0ed27fb6467662dd24fb23aee6b95dd2c9c4061f
Reviewed-by: Kevin Funk <kevin.funk@kdab.com>
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
2019-05-08 12:45:41 +00:00
|
|
|
cmake/QtBuild.cmake
|
2019-11-21 12:33:28 +00:00
|
|
|
cmake/QtBuildInformation.cmake
|
2020-08-13 15:37:47 +00:00
|
|
|
cmake/QtCMakeHelpers.cmake
|
2020-10-30 16:42:34 +00:00
|
|
|
cmake/QtCMakeVersionHelpers.cmake
|
Implement developer / non-prefix builds
A non-prefix build is a build where you don't have to run
make install.
To do a non-prefix build, pass -DFEATURE_developer_build=ON when
invoking CMake on qtbase. Note that this of course also enables
developer build features (private tests, etc).
When doing a non-prefix build, the CMAKE_INSTALL_PREFIX cache variable
will point to the qtbase build directory.
Tests can be run without installing Qt (QPA plugins are picked up from
the build dir).
This patch stops installation of any files by forcing the
make "install" target be a no-op.
When invoking cmake on the qtsvg module (or any other module),
the CMAKE_INSTALL_PREFIX variable should be set to the qtbase build
directory.
The developer-build feature is propagated via the QtCore Config file,
so that when building other modules, you don't have to specify it
on the command line again.
As a result of the change, all libraries, plugins, tools, include dirs,
CMake Config files, CMake Targets files, Macro files, etc,
will be placed in the qtbase build directory, mimicking the file layout
of an installed Qt file layout.
Only examples and tests are kept in the separate module build
directories, which is equivalent to how qmake does it.
The following global variables contain paths for the
appropriate prefix or non prefix builds:
QT_BUILD_DIR, QT_INSTALL_DIR, QT_CONFIG_BUILD_DIR,
QT_CONFIG_INSTALL_DIR. These should be used by developers
when deciding where files should be placed.
All usages of install() are replaced by qt_install(), which has some
additional logic on how to handle associationg of CMake targets to
export names.
When installing files, some consideration should be taken if
qt_copy_or_install() needs to be used instead of qt_install(),
which takes care of copying files from the source dir to the build dir
when doing non-prefix builds.
Tested with qtbase and qtsvg, developer builds, non-developer builds
and static developer builds on Windows, Linux and macOS.
Task-number: QTBUG-75581
Change-Id: I0ed27fb6467662dd24fb23aee6b95dd2c9c4061f
Reviewed-by: Kevin Funk <kevin.funk@kdab.com>
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
2019-05-08 12:45:41 +00:00
|
|
|
cmake/QtCompilerFlags.cmake
|
|
|
|
|
cmake/QtCompilerOptimization.cmake
|
2020-08-03 14:28:16 +00:00
|
|
|
cmake/QtConfigDependencies.cmake.in
|
2020-10-23 11:06:51 +00:00
|
|
|
cmake/QtDeferredDependenciesHelpers.cmake
|
2020-08-13 15:37:47 +00:00
|
|
|
cmake/QtDbusHelpers.cmake
|
|
|
|
|
cmake/QtDocsHelpers.cmake
|
|
|
|
|
cmake/QtExecutableHelpers.cmake
|
CMake: Introduce qt_configure_file
It has the same kind of signature as file(GENERATE) but
creates the files at configure time rather than generation time.
CMake provides a few ways to generate files
file(WRITE) -> always overrides content
configure_file() -> only overrides if content changes, creates file
at configure time, can only take a file as input
file(GENERATE) -> only overrides if content changes, creats file
at generation time, can take a string or file
as input
Because dealing with an input file is a hassle (need to create one,
make sure it's installed, make sure it's used correctly in the
various build types like super-build, non-prefix-build, etc)
people tend to use file(GENERATE) instead, which can take a string
argument, and is thus easier to use.
Unfortunately that introduces subtle bugs because the
file is created at generation time, but there are existence
checks which are done at configuration time.
Thus qt_configure_file allows creation of files at configure time,
without having to provide an input file. Underneath it uses
configure_file(). Once CMake 3.18 is released, the implementation
can be switched to use file(CONFIGURE).
Change-Id: Ic8f8d88541ef0b25d01af143352c8c9ba390ad5f
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
2020-03-20 14:03:54 +00:00
|
|
|
cmake/QtFileConfigure.txt.in
|
2020-08-13 15:37:47 +00:00
|
|
|
cmake/QtFindPackageHelpers.cmake
|
|
|
|
|
cmake/QtFindWrapConfigExtra.cmake.in
|
|
|
|
|
cmake/QtFindWrapHelper.cmake
|
|
|
|
|
cmake/QtFinishPrlFile.cmake
|
|
|
|
|
cmake/QtFlagHandlingHelpers.cmake
|
|
|
|
|
cmake/QtFrameworkHelpers.cmake
|
2020-04-22 19:01:32 +00:00
|
|
|
cmake/QtGenerateExtPri.cmake
|
2020-07-30 17:17:09 +00:00
|
|
|
cmake/QtGenerateLibHelpers.cmake
|
2020-08-13 15:37:47 +00:00
|
|
|
cmake/QtGenerateLibPri.cmake
|
|
|
|
|
cmake/QtGlobalStateHelpers.cmake
|
2020-08-26 20:19:55 +00:00
|
|
|
cmake/QtHeadersClean.cmake
|
2020-08-13 15:37:47 +00:00
|
|
|
cmake/QtInstallHelpers.cmake
|
2020-10-12 08:55:18 +00:00
|
|
|
cmake/QtJavaHelpers.cmake
|
2020-08-13 15:37:47 +00:00
|
|
|
cmake/QtLalrHelpers.cmake
|
Implement developer / non-prefix builds
A non-prefix build is a build where you don't have to run
make install.
To do a non-prefix build, pass -DFEATURE_developer_build=ON when
invoking CMake on qtbase. Note that this of course also enables
developer build features (private tests, etc).
When doing a non-prefix build, the CMAKE_INSTALL_PREFIX cache variable
will point to the qtbase build directory.
Tests can be run without installing Qt (QPA plugins are picked up from
the build dir).
This patch stops installation of any files by forcing the
make "install" target be a no-op.
When invoking cmake on the qtsvg module (or any other module),
the CMAKE_INSTALL_PREFIX variable should be set to the qtbase build
directory.
The developer-build feature is propagated via the QtCore Config file,
so that when building other modules, you don't have to specify it
on the command line again.
As a result of the change, all libraries, plugins, tools, include dirs,
CMake Config files, CMake Targets files, Macro files, etc,
will be placed in the qtbase build directory, mimicking the file layout
of an installed Qt file layout.
Only examples and tests are kept in the separate module build
directories, which is equivalent to how qmake does it.
The following global variables contain paths for the
appropriate prefix or non prefix builds:
QT_BUILD_DIR, QT_INSTALL_DIR, QT_CONFIG_BUILD_DIR,
QT_CONFIG_INSTALL_DIR. These should be used by developers
when deciding where files should be placed.
All usages of install() are replaced by qt_install(), which has some
additional logic on how to handle associationg of CMake targets to
export names.
When installing files, some consideration should be taken if
qt_copy_or_install() needs to be used instead of qt_install(),
which takes care of copying files from the source dir to the build dir
when doing non-prefix builds.
Tested with qtbase and qtsvg, developer builds, non-developer builds
and static developer builds on Windows, Linux and macOS.
Task-number: QTBUG-75581
Change-Id: I0ed27fb6467662dd24fb23aee6b95dd2c9c4061f
Reviewed-by: Kevin Funk <kevin.funk@kdab.com>
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
2019-05-08 12:45:41 +00:00
|
|
|
cmake/QtModuleConfig.cmake.in
|
|
|
|
|
cmake/QtModuleDependencies.cmake.in
|
2020-08-13 15:37:47 +00:00
|
|
|
cmake/QtModuleHelpers.cmake
|
Implement developer / non-prefix builds
A non-prefix build is a build where you don't have to run
make install.
To do a non-prefix build, pass -DFEATURE_developer_build=ON when
invoking CMake on qtbase. Note that this of course also enables
developer build features (private tests, etc).
When doing a non-prefix build, the CMAKE_INSTALL_PREFIX cache variable
will point to the qtbase build directory.
Tests can be run without installing Qt (QPA plugins are picked up from
the build dir).
This patch stops installation of any files by forcing the
make "install" target be a no-op.
When invoking cmake on the qtsvg module (or any other module),
the CMAKE_INSTALL_PREFIX variable should be set to the qtbase build
directory.
The developer-build feature is propagated via the QtCore Config file,
so that when building other modules, you don't have to specify it
on the command line again.
As a result of the change, all libraries, plugins, tools, include dirs,
CMake Config files, CMake Targets files, Macro files, etc,
will be placed in the qtbase build directory, mimicking the file layout
of an installed Qt file layout.
Only examples and tests are kept in the separate module build
directories, which is equivalent to how qmake does it.
The following global variables contain paths for the
appropriate prefix or non prefix builds:
QT_BUILD_DIR, QT_INSTALL_DIR, QT_CONFIG_BUILD_DIR,
QT_CONFIG_INSTALL_DIR. These should be used by developers
when deciding where files should be placed.
All usages of install() are replaced by qt_install(), which has some
additional logic on how to handle associationg of CMake targets to
export names.
When installing files, some consideration should be taken if
qt_copy_or_install() needs to be used instead of qt_install(),
which takes care of copying files from the source dir to the build dir
when doing non-prefix builds.
Tested with qtbase and qtsvg, developer builds, non-developer builds
and static developer builds on Windows, Linux and macOS.
Task-number: QTBUG-75581
Change-Id: I0ed27fb6467662dd24fb23aee6b95dd2c9c4061f
Reviewed-by: Kevin Funk <kevin.funk@kdab.com>
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
2019-05-08 12:45:41 +00:00
|
|
|
cmake/QtModuleToolsConfig.cmake.in
|
2020-08-13 15:37:47 +00:00
|
|
|
cmake/QtModuleToolsDependencies.cmake.in
|
2019-12-06 13:29:18 +00:00
|
|
|
cmake/QtModuleToolsVersionlessTargets.cmake.in
|
2020-08-13 15:37:47 +00:00
|
|
|
cmake/QtNoLinkTargetHelpers.cmake
|
|
|
|
|
cmake/QtPlatformAndroid.cmake
|
|
|
|
|
cmake/QtPlatformSupport.cmake
|
2019-06-04 13:37:55 +00:00
|
|
|
cmake/QtPluginConfig.cmake.in
|
|
|
|
|
cmake/QtPluginDependencies.cmake.in
|
2020-08-13 15:37:47 +00:00
|
|
|
cmake/QtPluginHelpers.cmake
|
|
|
|
|
cmake/QtPlugins.cmake.in
|
|
|
|
|
cmake/QtPostProcess.cmake
|
2020-08-14 08:24:57 +00:00
|
|
|
cmake/QtPostProcessHelpers.cmake
|
2020-08-13 15:37:47 +00:00
|
|
|
cmake/QtPrecompiledHeadersHelpers.cmake
|
|
|
|
|
cmake/QtPriHelpers.cmake
|
|
|
|
|
cmake/QtPrlHelpers.cmake
|
2021-04-29 10:47:52 +00:00
|
|
|
cmake/QtPlatformTargetHelpers.cmake
|
2020-08-31 08:38:53 +00:00
|
|
|
cmake/QtProcessConfigureArgs.cmake
|
2020-08-13 15:37:47 +00:00
|
|
|
cmake/QtQmakeHelpers.cmake
|
|
|
|
|
cmake/QtResourceHelpers.cmake
|
|
|
|
|
cmake/QtRpathHelpers.cmake
|
|
|
|
|
cmake/QtSanitizerHelpers.cmake
|
|
|
|
|
cmake/QtScopeFinalizerHelpers.cmake
|
|
|
|
|
cmake/QtSeparateDebugInfo.Info.plist.in
|
|
|
|
|
cmake/QtSeparateDebugInfo.cmake
|
|
|
|
|
cmake/QtSetup.cmake
|
|
|
|
|
cmake/QtSimdHelpers.cmake
|
2021-05-06 14:27:48 +00:00
|
|
|
cmake/QtSingleRepoTargetSetBuildHelpers.cmake
|
2020-08-13 15:37:47 +00:00
|
|
|
cmake/QtStandaloneTestsConfig.cmake.in
|
|
|
|
|
cmake/QtSyncQtHelpers.cmake
|
|
|
|
|
cmake/QtTargetHelpers.cmake
|
|
|
|
|
cmake/QtTestHelpers.cmake
|
2020-10-12 08:55:18 +00:00
|
|
|
cmake/QtToolchainHelpers.cmake
|
2020-08-13 15:37:47 +00:00
|
|
|
cmake/QtToolHelpers.cmake
|
2020-09-03 08:29:41 +00:00
|
|
|
cmake/QtWasmHelpers.cmake
|
2020-10-12 08:55:18 +00:00
|
|
|
cmake/QtWrapperScriptHelpers.cmake
|
2020-10-29 10:34:32 +00:00
|
|
|
cmake/QtWriteArgsFile.cmake
|
Implement developer / non-prefix builds
A non-prefix build is a build where you don't have to run
make install.
To do a non-prefix build, pass -DFEATURE_developer_build=ON when
invoking CMake on qtbase. Note that this of course also enables
developer build features (private tests, etc).
When doing a non-prefix build, the CMAKE_INSTALL_PREFIX cache variable
will point to the qtbase build directory.
Tests can be run without installing Qt (QPA plugins are picked up from
the build dir).
This patch stops installation of any files by forcing the
make "install" target be a no-op.
When invoking cmake on the qtsvg module (or any other module),
the CMAKE_INSTALL_PREFIX variable should be set to the qtbase build
directory.
The developer-build feature is propagated via the QtCore Config file,
so that when building other modules, you don't have to specify it
on the command line again.
As a result of the change, all libraries, plugins, tools, include dirs,
CMake Config files, CMake Targets files, Macro files, etc,
will be placed in the qtbase build directory, mimicking the file layout
of an installed Qt file layout.
Only examples and tests are kept in the separate module build
directories, which is equivalent to how qmake does it.
The following global variables contain paths for the
appropriate prefix or non prefix builds:
QT_BUILD_DIR, QT_INSTALL_DIR, QT_CONFIG_BUILD_DIR,
QT_CONFIG_INSTALL_DIR. These should be used by developers
when deciding where files should be placed.
All usages of install() are replaced by qt_install(), which has some
additional logic on how to handle associationg of CMake targets to
export names.
When installing files, some consideration should be taken if
qt_copy_or_install() needs to be used instead of qt_install(),
which takes care of copying files from the source dir to the build dir
when doing non-prefix builds.
Tested with qtbase and qtsvg, developer builds, non-developer builds
and static developer builds on Windows, Linux and macOS.
Task-number: QTBUG-75581
Change-Id: I0ed27fb6467662dd24fb23aee6b95dd2c9c4061f
Reviewed-by: Kevin Funk <kevin.funk@kdab.com>
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
2019-05-08 12:45:41 +00:00
|
|
|
DESTINATION "${__GlobalConfig_install_dir}"
|
2018-10-24 13:20:27 +00:00
|
|
|
)
|
Implement developer / non-prefix builds
A non-prefix build is a build where you don't have to run
make install.
To do a non-prefix build, pass -DFEATURE_developer_build=ON when
invoking CMake on qtbase. Note that this of course also enables
developer build features (private tests, etc).
When doing a non-prefix build, the CMAKE_INSTALL_PREFIX cache variable
will point to the qtbase build directory.
Tests can be run without installing Qt (QPA plugins are picked up from
the build dir).
This patch stops installation of any files by forcing the
make "install" target be a no-op.
When invoking cmake on the qtsvg module (or any other module),
the CMAKE_INSTALL_PREFIX variable should be set to the qtbase build
directory.
The developer-build feature is propagated via the QtCore Config file,
so that when building other modules, you don't have to specify it
on the command line again.
As a result of the change, all libraries, plugins, tools, include dirs,
CMake Config files, CMake Targets files, Macro files, etc,
will be placed in the qtbase build directory, mimicking the file layout
of an installed Qt file layout.
Only examples and tests are kept in the separate module build
directories, which is equivalent to how qmake does it.
The following global variables contain paths for the
appropriate prefix or non prefix builds:
QT_BUILD_DIR, QT_INSTALL_DIR, QT_CONFIG_BUILD_DIR,
QT_CONFIG_INSTALL_DIR. These should be used by developers
when deciding where files should be placed.
All usages of install() are replaced by qt_install(), which has some
additional logic on how to handle associationg of CMake targets to
export names.
When installing files, some consideration should be taken if
qt_copy_or_install() needs to be used instead of qt_install(),
which takes care of copying files from the source dir to the build dir
when doing non-prefix builds.
Tested with qtbase and qtsvg, developer builds, non-developer builds
and static developer builds on Windows, Linux and macOS.
Task-number: QTBUG-75581
Change-Id: I0ed27fb6467662dd24fb23aee6b95dd2c9c4061f
Reviewed-by: Kevin Funk <kevin.funk@kdab.com>
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
2019-05-08 12:45:41 +00:00
|
|
|
|
2021-06-03 11:51:48 +00:00
|
|
|
# Install public config.tests files.
|
|
|
|
|
qt_copy_or_install(DIRECTORY
|
|
|
|
|
"cmake/config.tests"
|
|
|
|
|
DESTINATION "${__GlobalConfig_install_dir}"
|
|
|
|
|
)
|
|
|
|
|
|
2021-04-28 13:25:18 +00:00
|
|
|
# Install public CMake files.
|
|
|
|
|
# The functions defined inside can be used in both public projects and while building Qt.
|
|
|
|
|
# Usually we put such functions into Qt6CoreMacros.cmake, but that's getting bloated.
|
|
|
|
|
# These files will be included by Qt6Config.cmake.
|
|
|
|
|
set(__public_cmake_helpers
|
|
|
|
|
cmake/QtFeature.cmake
|
|
|
|
|
cmake/QtFeatureCommon.cmake
|
2021-05-19 17:46:24 +00:00
|
|
|
cmake/QtPublicFinalizerHelpers.cmake
|
2021-04-28 13:25:18 +00:00
|
|
|
cmake/QtPublicPluginHelpers.cmake
|
2021-04-29 10:47:52 +00:00
|
|
|
cmake/QtPublicTargetHelpers.cmake
|
|
|
|
|
cmake/QtPublicWalkLibsHelpers.cmake
|
2021-06-14 14:24:57 +00:00
|
|
|
cmake/QtPublicFindPackageHelpers.cmake
|
2021-04-28 13:25:18 +00:00
|
|
|
)
|
|
|
|
|
|
|
|
|
|
qt_copy_or_install(FILES ${__public_cmake_helpers} DESTINATION "${__GlobalConfig_install_dir}")
|
|
|
|
|
|
|
|
|
|
# In prefix builds we also need to copy the files into the build config directory, so that the
|
|
|
|
|
# build-dir Qt6Config.cmake finds the files when building examples in-tree.
|
|
|
|
|
if(QT_WILL_INSTALL)
|
|
|
|
|
foreach(_public_cmake_helper ${__public_cmake_helpers})
|
|
|
|
|
file(COPY "${_public_cmake_helper}" DESTINATION "${__GlobalConfig_build_dir}")
|
|
|
|
|
endforeach()
|
|
|
|
|
endif()
|
Implement developer / non-prefix builds
A non-prefix build is a build where you don't have to run
make install.
To do a non-prefix build, pass -DFEATURE_developer_build=ON when
invoking CMake on qtbase. Note that this of course also enables
developer build features (private tests, etc).
When doing a non-prefix build, the CMAKE_INSTALL_PREFIX cache variable
will point to the qtbase build directory.
Tests can be run without installing Qt (QPA plugins are picked up from
the build dir).
This patch stops installation of any files by forcing the
make "install" target be a no-op.
When invoking cmake on the qtsvg module (or any other module),
the CMAKE_INSTALL_PREFIX variable should be set to the qtbase build
directory.
The developer-build feature is propagated via the QtCore Config file,
so that when building other modules, you don't have to specify it
on the command line again.
As a result of the change, all libraries, plugins, tools, include dirs,
CMake Config files, CMake Targets files, Macro files, etc,
will be placed in the qtbase build directory, mimicking the file layout
of an installed Qt file layout.
Only examples and tests are kept in the separate module build
directories, which is equivalent to how qmake does it.
The following global variables contain paths for the
appropriate prefix or non prefix builds:
QT_BUILD_DIR, QT_INSTALL_DIR, QT_CONFIG_BUILD_DIR,
QT_CONFIG_INSTALL_DIR. These should be used by developers
when deciding where files should be placed.
All usages of install() are replaced by qt_install(), which has some
additional logic on how to handle associationg of CMake targets to
export names.
When installing files, some consideration should be taken if
qt_copy_or_install() needs to be used instead of qt_install(),
which takes care of copying files from the source dir to the build dir
when doing non-prefix builds.
Tested with qtbase and qtsvg, developer builds, non-developer builds
and static developer builds on Windows, Linux and macOS.
Task-number: QTBUG-75581
Change-Id: I0ed27fb6467662dd24fb23aee6b95dd2c9c4061f
Reviewed-by: Kevin Funk <kevin.funk@kdab.com>
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
2019-05-08 12:45:41 +00:00
|
|
|
|
2019-02-13 08:45:57 +00:00
|
|
|
# TODO: Check whether this is the right place to install these
|
Implement developer / non-prefix builds
A non-prefix build is a build where you don't have to run
make install.
To do a non-prefix build, pass -DFEATURE_developer_build=ON when
invoking CMake on qtbase. Note that this of course also enables
developer build features (private tests, etc).
When doing a non-prefix build, the CMAKE_INSTALL_PREFIX cache variable
will point to the qtbase build directory.
Tests can be run without installing Qt (QPA plugins are picked up from
the build dir).
This patch stops installation of any files by forcing the
make "install" target be a no-op.
When invoking cmake on the qtsvg module (or any other module),
the CMAKE_INSTALL_PREFIX variable should be set to the qtbase build
directory.
The developer-build feature is propagated via the QtCore Config file,
so that when building other modules, you don't have to specify it
on the command line again.
As a result of the change, all libraries, plugins, tools, include dirs,
CMake Config files, CMake Targets files, Macro files, etc,
will be placed in the qtbase build directory, mimicking the file layout
of an installed Qt file layout.
Only examples and tests are kept in the separate module build
directories, which is equivalent to how qmake does it.
The following global variables contain paths for the
appropriate prefix or non prefix builds:
QT_BUILD_DIR, QT_INSTALL_DIR, QT_CONFIG_BUILD_DIR,
QT_CONFIG_INSTALL_DIR. These should be used by developers
when deciding where files should be placed.
All usages of install() are replaced by qt_install(), which has some
additional logic on how to handle associationg of CMake targets to
export names.
When installing files, some consideration should be taken if
qt_copy_or_install() needs to be used instead of qt_install(),
which takes care of copying files from the source dir to the build dir
when doing non-prefix builds.
Tested with qtbase and qtsvg, developer builds, non-developer builds
and static developer builds on Windows, Linux and macOS.
Task-number: QTBUG-75581
Change-Id: I0ed27fb6467662dd24fb23aee6b95dd2c9c4061f
Reviewed-by: Kevin Funk <kevin.funk@kdab.com>
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
2019-05-08 12:45:41 +00:00
|
|
|
qt_copy_or_install(DIRECTORY cmake/3rdparty DESTINATION "${__GlobalConfig_install_dir}")
|
Write find_dependency() calls in Qt Module config files
This change introduces a new function called qt_find_package()
which can take an extra option called PROVIDED_TARGETS, which
associates targets with the package that defines those targets.
This is done by setting the INTERFACE_QT_PACKAGE_NAME and
INTERFACE_QT_PACKAGE_VERSION properties on the imported targets.
This information allows us to generate appropriate find_dependency()
calls in a module's Config file for third party libraries.
For example when an application links against QtCore, it should also
link against zlib and atomic libraries. In order to do that, the
library locations first have to be found by CMake. This is achieved by
embedding find_dependency(ZLIB) and find_dependency(Atomic) in
Qt5CoreDependencies.cmake which is included by Qt5CoreConfig.cmake.
The latter is picked up when an application project contains
find_package(Qt5Core), and thus all linking dependencies are resolved.
The information 'which package provides which targets' is contained
in the python json2cmake conversion script. The generated output of
the script contains qt_find_package() calls that represent that
information.
The Qt5CoreDependencies.cmake file and which which dependencies it
contains is generated at the QtPostProcess stop.
Note that for non-static Qt builds, we only need to propagate public
3rd party libraries. For static builds, we need all third party
libraries.
In order for the INTERFACE_QT_PACKAGE_NAME property to be read in any
scope, the targets on which the property is set, have to be GLOBAL.
Also for applications and other modules to find all required third
party libraries, we have to install all our custom Find modules, and
make sure they define INTERFACE IMPORTED libraries, and not just
IMPORTED libraries.
Change-Id: I694d6e32d05b96d5e241df0156fc79d0029426aa
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
2019-04-24 15:14:25 +00:00
|
|
|
|
|
|
|
|
# Install our custom Find modules, which will be used by the find_dependency() calls
|
|
|
|
|
# inside the generated ModuleDependencies cmake files.
|
Implement developer / non-prefix builds
A non-prefix build is a build where you don't have to run
make install.
To do a non-prefix build, pass -DFEATURE_developer_build=ON when
invoking CMake on qtbase. Note that this of course also enables
developer build features (private tests, etc).
When doing a non-prefix build, the CMAKE_INSTALL_PREFIX cache variable
will point to the qtbase build directory.
Tests can be run without installing Qt (QPA plugins are picked up from
the build dir).
This patch stops installation of any files by forcing the
make "install" target be a no-op.
When invoking cmake on the qtsvg module (or any other module),
the CMAKE_INSTALL_PREFIX variable should be set to the qtbase build
directory.
The developer-build feature is propagated via the QtCore Config file,
so that when building other modules, you don't have to specify it
on the command line again.
As a result of the change, all libraries, plugins, tools, include dirs,
CMake Config files, CMake Targets files, Macro files, etc,
will be placed in the qtbase build directory, mimicking the file layout
of an installed Qt file layout.
Only examples and tests are kept in the separate module build
directories, which is equivalent to how qmake does it.
The following global variables contain paths for the
appropriate prefix or non prefix builds:
QT_BUILD_DIR, QT_INSTALL_DIR, QT_CONFIG_BUILD_DIR,
QT_CONFIG_INSTALL_DIR. These should be used by developers
when deciding where files should be placed.
All usages of install() are replaced by qt_install(), which has some
additional logic on how to handle associationg of CMake targets to
export names.
When installing files, some consideration should be taken if
qt_copy_or_install() needs to be used instead of qt_install(),
which takes care of copying files from the source dir to the build dir
when doing non-prefix builds.
Tested with qtbase and qtsvg, developer builds, non-developer builds
and static developer builds on Windows, Linux and macOS.
Task-number: QTBUG-75581
Change-Id: I0ed27fb6467662dd24fb23aee6b95dd2c9c4061f
Reviewed-by: Kevin Funk <kevin.funk@kdab.com>
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
2019-05-08 12:45:41 +00:00
|
|
|
qt_copy_or_install(DIRECTORY cmake/
|
|
|
|
|
DESTINATION "${__GlobalConfig_install_dir}"
|
Write find_dependency() calls in Qt Module config files
This change introduces a new function called qt_find_package()
which can take an extra option called PROVIDED_TARGETS, which
associates targets with the package that defines those targets.
This is done by setting the INTERFACE_QT_PACKAGE_NAME and
INTERFACE_QT_PACKAGE_VERSION properties on the imported targets.
This information allows us to generate appropriate find_dependency()
calls in a module's Config file for third party libraries.
For example when an application links against QtCore, it should also
link against zlib and atomic libraries. In order to do that, the
library locations first have to be found by CMake. This is achieved by
embedding find_dependency(ZLIB) and find_dependency(Atomic) in
Qt5CoreDependencies.cmake which is included by Qt5CoreConfig.cmake.
The latter is picked up when an application project contains
find_package(Qt5Core), and thus all linking dependencies are resolved.
The information 'which package provides which targets' is contained
in the python json2cmake conversion script. The generated output of
the script contains qt_find_package() calls that represent that
information.
The Qt5CoreDependencies.cmake file and which which dependencies it
contains is generated at the QtPostProcess stop.
Note that for non-static Qt builds, we only need to propagate public
3rd party libraries. For static builds, we need all third party
libraries.
In order for the INTERFACE_QT_PACKAGE_NAME property to be read in any
scope, the targets on which the property is set, have to be GLOBAL.
Also for applications and other modules to find all required third
party libraries, we have to install all our custom Find modules, and
make sure they define INTERFACE IMPORTED libraries, and not just
IMPORTED libraries.
Change-Id: I694d6e32d05b96d5e241df0156fc79d0029426aa
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
2019-04-24 15:14:25 +00:00
|
|
|
FILES_MATCHING PATTERN "Find*.cmake"
|
|
|
|
|
PATTERN "tests" EXCLUDE
|
|
|
|
|
PATTERN "3rdparty" EXCLUDE
|
|
|
|
|
)
|
2019-05-15 11:57:15 +00:00
|
|
|
|
2020-03-16 12:36:47 +00:00
|
|
|
if(MACOS)
|
cmake: Add default Info.plist for macOS with some important keys
The default Info.plist shipped with CMake lacks an NSPrincipalClass
entry, which is crucial for making macOS apps run in full resolution
on retina screens.
We make sure the file is only picked up on macOS, not iOS and friends,
since those platforms require another principal class. If needed we can
extract the value out as a CMake variable and use the same file for all
Apple platforms. Doing so would assume all keys are single-platform
only, so if that's not the case we need platform-specific files.
We should probably extract the package type out as a variable too,
so that the file can be used for both apps, plugins, and frameworks,
but doing so requires setting up that variable somewhere based on
the target type, which CMake doesn't allow in an easy way.
The file itself is based on the file CMake ships, combined with
keys inherited from Qt's existing plist templates for qmake, and
adjusted to match what Xcode generates by default these days.
Change-Id: I3f5109e5fff63cdbd109a99d4008948d4bd2102b
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
2020-03-11 20:45:50 +00:00
|
|
|
qt_copy_or_install(FILES
|
|
|
|
|
cmake/macos/MacOSXBundleInfo.plist.in
|
|
|
|
|
DESTINATION "${__GlobalConfig_install_dir}/macos"
|
|
|
|
|
)
|
2021-04-14 16:16:44 +00:00
|
|
|
elseif(IOS)
|
|
|
|
|
qt_copy_or_install(FILES
|
|
|
|
|
cmake/ios/MacOSXBundleInfo.plist.in
|
|
|
|
|
DESTINATION "${__GlobalConfig_install_dir}/ios"
|
|
|
|
|
)
|
cmake: Add default Info.plist for macOS with some important keys
The default Info.plist shipped with CMake lacks an NSPrincipalClass
entry, which is crucial for making macOS apps run in full resolution
on retina screens.
We make sure the file is only picked up on macOS, not iOS and friends,
since those platforms require another principal class. If needed we can
extract the value out as a CMake variable and use the same file for all
Apple platforms. Doing so would assume all keys are single-platform
only, so if that's not the case we need platform-specific files.
We should probably extract the package type out as a variable too,
so that the file can be used for both apps, plugins, and frameworks,
but doing so requires setting up that variable somewhere based on
the target type, which CMake doesn't allow in an easy way.
The file itself is based on the file CMake ships, combined with
keys inherited from Qt's existing plist templates for qmake, and
adjusted to match what Xcode generates by default these days.
Change-Id: I3f5109e5fff63cdbd109a99d4008948d4bd2102b
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
2020-03-11 20:45:50 +00:00
|
|
|
endif()
|
2020-08-18 16:13:03 +00:00
|
|
|
|
|
|
|
|
# Install CI support files to libexec.
|
|
|
|
|
qt_path_join(__qt_libexec_install_dir "${QT_INSTALL_DIR}" "${INSTALL_LIBEXECDIR}")
|
|
|
|
|
qt_copy_or_install(FILES coin/instructions/qmake/ensure_pro_file.cmake
|
|
|
|
|
DESTINATION "${__qt_libexec_install_dir}")
|
