AuroraMiddleware/qt5base-lts
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
707129fd5a
qt5base-lts/coin/instructions/cmake_build_and_upload_test_artifacts.yaml

30 lines
999 B
YAML
Raw Normal View History

Share most common part of module_config.yaml Change-Id: Ieea5b662e039cff24e26a127b4a3a8610ed588cc Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
2019-08-22 06:21:24 +00:00
type: Group
instructions:
- type: ChangeDirectory
Make standalone tests build via top level repo project Previously repo/tests/CMakeLists.txt was a standalone project on which CMake could be called. This was useful for Coin to be able to build and package only tests, but was a bit troublesome because that means having to specify the usual boilerplate like minimum CMake version, which packages to find in every tests.pro project. Instead of having a separate standalone project, modify the top level project and associated CMake code to allow passing a special QT_BUILD_STANDALONE_TESTS variable, which causes the top level project to build only tests, and find Qt in the previously installed qt location. This also means that when building a repo, we generate a ${repo_name}TestsConfig.cmake file which does find_package on all the modules that have been built as part of that repo. So that when standalone tests bare built for that repo, the modules are automatically found. qt_set_up_standalone_tests_build() is modified to be a no-op because it is not needed anymore. Its usage should be removed from all the other repos, and then removed from qtbase. Non-adjusted tests/CMakeLists.txt projects in other repositories should still be buildable with the current code, until they are updated to the new format. Adjust the Coin build instructions to build the standalone tests in a separate directory. Adjust pro2cmake to generate new structure for the tests/tests.pro projects. Adjust the qtbase tests project. Fixes: QTBUG-79239 Change-Id: Ib4b66bc772d8876cdcbae1e90ce5a5a5234fa675 Reviewed-by: Qt CMake Build Bot Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
2019-11-01 10:48:23 +00:00
directory: "{{.SourceDir}}"
- type: MakeDirectory
CMake: Build standalone tests out of source in Coin Due to a bug in upstream CMake regarding relative paths being encoded into the build.ninja file when performing in source builds, we need to build the tests in a standalone directory outside of the source directory. Failing to do so will cause the source directory for the test to be incorrect which can cause tests to fails and never read the BLACKLIST.txt file. See the mentioned issue for details. Task-number: QTBUG-82820 Change-Id: Ie5c178a92369d6b9decff625bd9641e53088a9fa Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
2020-03-11 13:17:50 +00:00
directory: "{{.SourceDir}}_standalone_tests"
Make standalone tests build via top level repo project Previously repo/tests/CMakeLists.txt was a standalone project on which CMake could be called. This was useful for Coin to be able to build and package only tests, but was a bit troublesome because that means having to specify the usual boilerplate like minimum CMake version, which packages to find in every tests.pro project. Instead of having a separate standalone project, modify the top level project and associated CMake code to allow passing a special QT_BUILD_STANDALONE_TESTS variable, which causes the top level project to build only tests, and find Qt in the previously installed qt location. This also means that when building a repo, we generate a ${repo_name}TestsConfig.cmake file which does find_package on all the modules that have been built as part of that repo. So that when standalone tests bare built for that repo, the modules are automatically found. qt_set_up_standalone_tests_build() is modified to be a no-op because it is not needed anymore. Its usage should be removed from all the other repos, and then removed from qtbase. Non-adjusted tests/CMakeLists.txt projects in other repositories should still be buildable with the current code, until they are updated to the new format. Adjust the Coin build instructions to build the standalone tests in a separate directory. Adjust pro2cmake to generate new structure for the tests/tests.pro projects. Adjust the qtbase tests project. Fixes: QTBUG-79239 Change-Id: Ib4b66bc772d8876cdcbae1e90ce5a5a5234fa675 Reviewed-by: Qt CMake Build Bot Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
2019-11-01 10:48:23 +00:00
- type: SetBuildDirectory
CMake: Build standalone tests out of source in Coin Due to a bug in upstream CMake regarding relative paths being encoded into the build.ninja file when performing in source builds, we need to build the tests in a standalone directory outside of the source directory. Failing to do so will cause the source directory for the test to be incorrect which can cause tests to fails and never read the BLACKLIST.txt file. See the mentioned issue for details. Task-number: QTBUG-82820 Change-Id: Ie5c178a92369d6b9decff625bd9641e53088a9fa Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
2020-03-11 13:17:50 +00:00
directory: "{{.SourceDir}}_standalone_tests"
Make standalone tests build via top level repo project Previously repo/tests/CMakeLists.txt was a standalone project on which CMake could be called. This was useful for Coin to be able to build and package only tests, but was a bit troublesome because that means having to specify the usual boilerplate like minimum CMake version, which packages to find in every tests.pro project. Instead of having a separate standalone project, modify the top level project and associated CMake code to allow passing a special QT_BUILD_STANDALONE_TESTS variable, which causes the top level project to build only tests, and find Qt in the previously installed qt location. This also means that when building a repo, we generate a ${repo_name}TestsConfig.cmake file which does find_package on all the modules that have been built as part of that repo. So that when standalone tests bare built for that repo, the modules are automatically found. qt_set_up_standalone_tests_build() is modified to be a no-op because it is not needed anymore. Its usage should be removed from all the other repos, and then removed from qtbase. Non-adjusted tests/CMakeLists.txt projects in other repositories should still be buildable with the current code, until they are updated to the new format. Adjust the Coin build instructions to build the standalone tests in a separate directory. Adjust pro2cmake to generate new structure for the tests/tests.pro projects. Adjust the qtbase tests project. Fixes: QTBUG-79239 Change-Id: Ib4b66bc772d8876cdcbae1e90ce5a5a5234fa675 Reviewed-by: Qt CMake Build Bot Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
2019-11-01 10:48:23 +00:00
- type: ChangeDirectory
directory: "{{.BuildDir}}"
Share most common part of module_config.yaml Change-Id: Ieea5b662e039cff24e26a127b4a3a8610ed588cc Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
2019-08-22 06:21:24 +00:00
- type: EnvironmentVariable
variableName: COIN_CMAKE_ARGS
Make standalone tests build via top level repo project Previously repo/tests/CMakeLists.txt was a standalone project on which CMake could be called. This was useful for Coin to be able to build and package only tests, but was a bit troublesome because that means having to specify the usual boilerplate like minimum CMake version, which packages to find in every tests.pro project. Instead of having a separate standalone project, modify the top level project and associated CMake code to allow passing a special QT_BUILD_STANDALONE_TESTS variable, which causes the top level project to build only tests, and find Qt in the previously installed qt location. This also means that when building a repo, we generate a ${repo_name}TestsConfig.cmake file which does find_package on all the modules that have been built as part of that repo. So that when standalone tests bare built for that repo, the modules are automatically found. qt_set_up_standalone_tests_build() is modified to be a no-op because it is not needed anymore. Its usage should be removed from all the other repos, and then removed from qtbase. Non-adjusted tests/CMakeLists.txt projects in other repositories should still be buildable with the current code, until they are updated to the new format. Adjust the Coin build instructions to build the standalone tests in a separate directory. Adjust pro2cmake to generate new structure for the tests/tests.pro projects. Adjust the qtbase tests project. Fixes: QTBUG-79239 Change-Id: Ib4b66bc772d8876cdcbae1e90ce5a5a5234fa675 Reviewed-by: Qt CMake Build Bot Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
2019-11-01 10:48:23 +00:00
variableValue: "-DQT_BUILD_STANDALONE_TESTS=ON -S {{.SourceDir}} -B ."
Share most common part of module_config.yaml Change-Id: Ieea5b662e039cff24e26a127b4a3a8610ed588cc Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
2019-08-22 06:21:24 +00:00
- !include "{{qt/qtbase}}/call_cmake.yaml"
- type: ExecuteCommand
CMake: Pass --verbose flag to ninja To allow seeing the exact compiler flags when build in Coin. We do the same for qmake builds. Change-Id: I8c43f35b95d722d914aaeaa8860720a3a0578737 Reviewed-by: Leander Beernaert <leander.beernaert@qt.io> Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
2020-03-13 15:56:41 +00:00
command: "{{.Env.ENV_PREFIX}} cmake --build . --parallel -v"
Share most common part of module_config.yaml Change-Id: Ieea5b662e039cff24e26a127b4a3a8610ed588cc Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
2019-08-22 06:21:24 +00:00
maxTimeInSeconds: 6000
coin: increase the timeout between output for all Change-Id: I3906a08f5e0cce9abeeafbb67a83d31fbf67c703 Reviewed-by: Toni Saario <toni.saario@qt.io> Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
2019-09-03 11:33:57 +00:00
maxTimeBetweenOutput: 1200
Share most common part of module_config.yaml Change-Id: Ieea5b662e039cff24e26a127b4a3a8610ed588cc Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
2019-08-22 06:21:24 +00:00
userMessageOnFailure: >
coin: remove contact person for cmake issues Change-Id: Id274bf821f424077e7259ed42433f2ef88153c36 Reviewed-by: Toni Saario <toni.saario@qt.io> Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
2020-02-13 09:40:41 +00:00
Failed to build sources. In the current state bug can be everywhere.
Share most common part of module_config.yaml Change-Id: Ieea5b662e039cff24e26a127b4a3a8610ed588cc Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
2019-08-22 06:21:24 +00:00
- type: UploadTestArtifact
transferType: UploadModuleTestsArtifact
Make standalone tests build via top level repo project Previously repo/tests/CMakeLists.txt was a standalone project on which CMake could be called. This was useful for Coin to be able to build and package only tests, but was a bit troublesome because that means having to specify the usual boilerplate like minimum CMake version, which packages to find in every tests.pro project. Instead of having a separate standalone project, modify the top level project and associated CMake code to allow passing a special QT_BUILD_STANDALONE_TESTS variable, which causes the top level project to build only tests, and find Qt in the previously installed qt location. This also means that when building a repo, we generate a ${repo_name}TestsConfig.cmake file which does find_package on all the modules that have been built as part of that repo. So that when standalone tests bare built for that repo, the modules are automatically found. qt_set_up_standalone_tests_build() is modified to be a no-op because it is not needed anymore. Its usage should be removed from all the other repos, and then removed from qtbase. Non-adjusted tests/CMakeLists.txt projects in other repositories should still be buildable with the current code, until they are updated to the new format. Adjust the Coin build instructions to build the standalone tests in a separate directory. Adjust pro2cmake to generate new structure for the tests/tests.pro projects. Adjust the qtbase tests project. Fixes: QTBUG-79239 Change-Id: Ib4b66bc772d8876cdcbae1e90ce5a5a5234fa675 Reviewed-by: Qt CMake Build Bot Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
2019-11-01 10:48:23 +00:00
archiveDirectory: "{{.BuildDir}}"
Share most common part of module_config.yaml Change-Id: Ieea5b662e039cff24e26a127b4a3a8610ed588cc Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
2019-08-22 06:21:24 +00:00
maxTimeInSeconds: 1200
maxTimeBetweenOutput: 1200
disable_if:
condition: property
property: configureArgs
contains_value: "-DBUILD_SHARED_LIBS=OFF"
Reference in New Issue Copy Permalink