AuroraMiddleware/qt5base-lts
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
8078a04e19
qt5base-lts/mkspecs/common/mac.conf

30 lines
737 B
Plaintext
Raw Normal View History

Distinguish between 'mac' and 'macx' qmake scopes The former applies both on Mac OS X and iOS, but 'macx' is specific to Mac OS X. ios.conf and macx.conf now share most of their settings in the common mac.conf. We set the default QMAKE_MAC_SDK before loading mac.conf, so that any overrides in the device config will apply afterwards. This means configure's mkspec parsing will be able to read the QMAKE_MAC_SDK. Change-Id: I0c7e26a6a0103e19b23ef152aa9e4ab461cee632 Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com> Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
2013-03-02 14:46:37 +00:00
#
# qmake configuration for common Mac OS (OSX and iOS)
#
!load(device_config): error(Could not successfully load device configuration)
Fix '=' alignment and replace tabs in *.conf (whitespace only change) Replace all tabs with proper space characters and consistently align the '=' characters. The default alignment for the '=' of 25 characters has been left as is to get a minimal diff. Lines with the '=' further to the right and those belonging to 'proper code (TM)' have not been touched. The work was mostly done using the following python script (might come in handy again...): import sys, re indent_eq = 25 + 0*4 # 25 characters was the most widely used indentation for the '=' character p = re.compile(r'(\w+)[ \t]*([\-\+]?)(=$|= )[ \t]*(.*$)') for fn in sys.argv[1:]: with open(fn, 'r+') as f: lines = [] nl_count = 0 continuity_indent = None for l in f: m = p.match(l) nl = l if m: n_spaces = max(m.start(3), indent_eq - 1) - len(m.group(2)) - len(m.group(1)) if m.group(2) and m.start(2) >= indent_eq-1 and m.start(2) % 4 == 0: n_spaces -= 1 # left-shift '+=' by one if the '+' is aligned to a multiple of 4 n_spaces = max(1, n_spaces) # we want at least one space before '='/'+=' nl = m.group(1) + ' '*n_spaces + ''.join(m.group(2,3,4)) + '\n' continuity_indent = nl.find('= ') + 2 if l[-2] == '\\' else None # remember indent on '\\$' elif continuity_indent: nl = ' '*continuity_indent + l.lstrip() if l[-2] != '\\': # check when to stop the continuation continuity_indent = None elif l.startswith('#'): nl = l.expandtabs(2) if l != nl: nl_count += 1 lines.append(nl) if nl_count > 0: print fn, nl_count, len(lines) f.seek(0) f.writelines(lines) f.truncate() Change-Id: I1d2870d0a2fe2e30d398c140fe523e69dd20c81b Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
2013-03-19 01:57:31 +00:00
QMAKE_PLATFORM += mac
Distinguish between 'mac' and 'macx' qmake scopes The former applies both on Mac OS X and iOS, but 'macx' is specific to Mac OS X. ios.conf and macx.conf now share most of their settings in the common mac.conf. We set the default QMAKE_MAC_SDK before loading mac.conf, so that any overrides in the device config will apply afterwards. This means configure's mkspec parsing will be able to read the QMAKE_MAC_SDK. Change-Id: I0c7e26a6a0103e19b23ef152aa9e4ab461cee632 Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com> Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
2013-03-02 14:46:37 +00:00
QMAKE_RESOURCE = /Developer/Tools/Rez
QMAKE_EXTENSION_SHLIB = dylib
QMAKE_LIBDIR =
# sdk.prf will prefix the proper SDK sysroot
Fix '=' alignment and replace tabs in *.conf (whitespace only change) Replace all tabs with proper space characters and consistently align the '=' characters. The default alignment for the '=' of 25 characters has been left as is to get a minimal diff. Lines with the '=' further to the right and those belonging to 'proper code (TM)' have not been touched. The work was mostly done using the following python script (might come in handy again...): import sys, re indent_eq = 25 + 0*4 # 25 characters was the most widely used indentation for the '=' character p = re.compile(r'(\w+)[ \t]*([\-\+]?)(=$|= )[ \t]*(.*$)') for fn in sys.argv[1:]: with open(fn, 'r+') as f: lines = [] nl_count = 0 continuity_indent = None for l in f: m = p.match(l) nl = l if m: n_spaces = max(m.start(3), indent_eq - 1) - len(m.group(2)) - len(m.group(1)) if m.group(2) and m.start(2) >= indent_eq-1 and m.start(2) % 4 == 0: n_spaces -= 1 # left-shift '+=' by one if the '+' is aligned to a multiple of 4 n_spaces = max(1, n_spaces) # we want at least one space before '='/'+=' nl = m.group(1) + ' '*n_spaces + ''.join(m.group(2,3,4)) + '\n' continuity_indent = nl.find('= ') + 2 if l[-2] == '\\' else None # remember indent on '\\$' elif continuity_indent: nl = ' '*continuity_indent + l.lstrip() if l[-2] != '\\': # check when to stop the continuation continuity_indent = None elif l.startswith('#'): nl = l.expandtabs(2) if l != nl: nl_count += 1 lines.append(nl) if nl_count > 0: print fn, nl_count, len(lines) f.seek(0) f.writelines(lines) f.truncate() Change-Id: I1d2870d0a2fe2e30d398c140fe523e69dd20c81b Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
2013-03-19 01:57:31 +00:00
QMAKE_INCDIR_OPENGL = \
Distinguish between 'mac' and 'macx' qmake scopes The former applies both on Mac OS X and iOS, but 'macx' is specific to Mac OS X. ios.conf and macx.conf now share most of their settings in the common mac.conf. We set the default QMAKE_MAC_SDK before loading mac.conf, so that any overrides in the device config will apply afterwards. This means configure's mkspec parsing will be able to read the QMAKE_MAC_SDK. Change-Id: I0c7e26a6a0103e19b23ef152aa9e4ab461cee632 Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com> Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
2013-03-02 14:46:37 +00:00
/System/Library/Frameworks/OpenGL.framework/Headers \
/System/Library/Frameworks/AGL.framework/Headers/
QMAKE_FIX_RPATH = install_name_tool -id
Fix '=' alignment and replace tabs in *.conf (whitespace only change) Replace all tabs with proper space characters and consistently align the '=' characters. The default alignment for the '=' of 25 characters has been left as is to get a minimal diff. Lines with the '=' further to the right and those belonging to 'proper code (TM)' have not been touched. The work was mostly done using the following python script (might come in handy again...): import sys, re indent_eq = 25 + 0*4 # 25 characters was the most widely used indentation for the '=' character p = re.compile(r'(\w+)[ \t]*([\-\+]?)(=$|= )[ \t]*(.*$)') for fn in sys.argv[1:]: with open(fn, 'r+') as f: lines = [] nl_count = 0 continuity_indent = None for l in f: m = p.match(l) nl = l if m: n_spaces = max(m.start(3), indent_eq - 1) - len(m.group(2)) - len(m.group(1)) if m.group(2) and m.start(2) >= indent_eq-1 and m.start(2) % 4 == 0: n_spaces -= 1 # left-shift '+=' by one if the '+' is aligned to a multiple of 4 n_spaces = max(1, n_spaces) # we want at least one space before '='/'+=' nl = m.group(1) + ' '*n_spaces + ''.join(m.group(2,3,4)) + '\n' continuity_indent = nl.find('= ') + 2 if l[-2] == '\\' else None # remember indent on '\\$' elif continuity_indent: nl = ' '*continuity_indent + l.lstrip() if l[-2] != '\\': # check when to stop the continuation continuity_indent = None elif l.startswith('#'): nl = l.expandtabs(2) if l != nl: nl_count += 1 lines.append(nl) if nl_count > 0: print fn, nl_count, len(lines) f.seek(0) f.writelines(lines) f.truncate() Change-Id: I1d2870d0a2fe2e30d398c140fe523e69dd20c81b Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
2013-03-19 01:57:31 +00:00
QMAKE_LFLAGS_RPATH =
Distinguish between 'mac' and 'macx' qmake scopes The former applies both on Mac OS X and iOS, but 'macx' is specific to Mac OS X. ios.conf and macx.conf now share most of their settings in the common mac.conf. We set the default QMAKE_MAC_SDK before loading mac.conf, so that any overrides in the device config will apply afterwards. This means configure's mkspec parsing will be able to read the QMAKE_MAC_SDK. Change-Id: I0c7e26a6a0103e19b23ef152aa9e4ab461cee632 Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com> Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
2013-03-02 14:46:37 +00:00
Fix '=' alignment and replace tabs in *.conf (whitespace only change) Replace all tabs with proper space characters and consistently align the '=' characters. The default alignment for the '=' of 25 characters has been left as is to get a minimal diff. Lines with the '=' further to the right and those belonging to 'proper code (TM)' have not been touched. The work was mostly done using the following python script (might come in handy again...): import sys, re indent_eq = 25 + 0*4 # 25 characters was the most widely used indentation for the '=' character p = re.compile(r'(\w+)[ \t]*([\-\+]?)(=$|= )[ \t]*(.*$)') for fn in sys.argv[1:]: with open(fn, 'r+') as f: lines = [] nl_count = 0 continuity_indent = None for l in f: m = p.match(l) nl = l if m: n_spaces = max(m.start(3), indent_eq - 1) - len(m.group(2)) - len(m.group(1)) if m.group(2) and m.start(2) >= indent_eq-1 and m.start(2) % 4 == 0: n_spaces -= 1 # left-shift '+=' by one if the '+' is aligned to a multiple of 4 n_spaces = max(1, n_spaces) # we want at least one space before '='/'+=' nl = m.group(1) + ' '*n_spaces + ''.join(m.group(2,3,4)) + '\n' continuity_indent = nl.find('= ') + 2 if l[-2] == '\\' else None # remember indent on '\\$' elif continuity_indent: nl = ' '*continuity_indent + l.lstrip() if l[-2] != '\\': # check when to stop the continuation continuity_indent = None elif l.startswith('#'): nl = l.expandtabs(2) if l != nl: nl_count += 1 lines.append(nl) if nl_count > 0: print fn, nl_count, len(lines) f.seek(0) f.writelines(lines) f.truncate() Change-Id: I1d2870d0a2fe2e30d398c140fe523e69dd20c81b Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
2013-03-19 01:57:31 +00:00
QMAKE_LIBS_DYNLOAD =
QMAKE_LIBS_OPENGL = -framework OpenGL -framework AGL
QMAKE_LIBS_THREAD =
Distinguish between 'mac' and 'macx' qmake scopes The former applies both on Mac OS X and iOS, but 'macx' is specific to Mac OS X. ios.conf and macx.conf now share most of their settings in the common mac.conf. We set the default QMAKE_MAC_SDK before loading mac.conf, so that any overrides in the device config will apply afterwards. This means configure's mkspec parsing will be able to read the QMAKE_MAC_SDK. Change-Id: I0c7e26a6a0103e19b23ef152aa9e4ab461cee632 Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com> Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
2013-03-02 14:46:37 +00:00
Fix '=' alignment and replace tabs in *.conf (whitespace only change) Replace all tabs with proper space characters and consistently align the '=' characters. The default alignment for the '=' of 25 characters has been left as is to get a minimal diff. Lines with the '=' further to the right and those belonging to 'proper code (TM)' have not been touched. The work was mostly done using the following python script (might come in handy again...): import sys, re indent_eq = 25 + 0*4 # 25 characters was the most widely used indentation for the '=' character p = re.compile(r'(\w+)[ \t]*([\-\+]?)(=$|= )[ \t]*(.*$)') for fn in sys.argv[1:]: with open(fn, 'r+') as f: lines = [] nl_count = 0 continuity_indent = None for l in f: m = p.match(l) nl = l if m: n_spaces = max(m.start(3), indent_eq - 1) - len(m.group(2)) - len(m.group(1)) if m.group(2) and m.start(2) >= indent_eq-1 and m.start(2) % 4 == 0: n_spaces -= 1 # left-shift '+=' by one if the '+' is aligned to a multiple of 4 n_spaces = max(1, n_spaces) # we want at least one space before '='/'+=' nl = m.group(1) + ' '*n_spaces + ''.join(m.group(2,3,4)) + '\n' continuity_indent = nl.find('= ') + 2 if l[-2] == '\\' else None # remember indent on '\\$' elif continuity_indent: nl = ' '*continuity_indent + l.lstrip() if l[-2] != '\\': # check when to stop the continuation continuity_indent = None elif l.startswith('#'): nl = l.expandtabs(2) if l != nl: nl_count += 1 lines.append(nl) if nl_count > 0: print fn, nl_count, len(lines) f.seek(0) f.writelines(lines) f.truncate() Change-Id: I1d2870d0a2fe2e30d398c140fe523e69dd20c81b Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
2013-03-19 01:57:31 +00:00
QMAKE_AR = ar cq
QMAKE_RANLIB = ranlib -s
Distinguish between 'mac' and 'macx' qmake scopes The former applies both on Mac OS X and iOS, but 'macx' is specific to Mac OS X. ios.conf and macx.conf now share most of their settings in the common mac.conf. We set the default QMAKE_MAC_SDK before loading mac.conf, so that any overrides in the device config will apply afterwards. This means configure's mkspec parsing will be able to read the QMAKE_MAC_SDK. Change-Id: I0c7e26a6a0103e19b23ef152aa9e4ab461cee632 Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com> Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
2013-03-02 14:46:37 +00:00
include(unix.conf)
Reference in New Issue Copy Permalink