AuroraMiddleware/qt5base-lts
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
8ab59fd8b3
qt5base-lts/cmake/QtAutoDetect.cmake

196 lines
8.6 KiB
CMake
Raw Normal View History

Add auto detection routines for android Add QtAutoDectect cmake which has routines to handle the vcpkg detection as well as set up some android configuration parameters. The latter will contribute towards keeping the cmake configuration commands shorter when targeting android. Change-Id: I721291c8dce39b5c298565a46867ddcab2df90e8 Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
2019-06-27 13:27:14 +00:00
#
# Collection of auto dection routines to improve the user eperience when
# building Qt from source.
#
Make standalone tests build via top level repo project Previously repo/tests/CMakeLists.txt was a standalone project on which CMake could be called. This was useful for Coin to be able to build and package only tests, but was a bit troublesome because that means having to specify the usual boilerplate like minimum CMake version, which packages to find in every tests.pro project. Instead of having a separate standalone project, modify the top level project and associated CMake code to allow passing a special QT_BUILD_STANDALONE_TESTS variable, which causes the top level project to build only tests, and find Qt in the previously installed qt location. This also means that when building a repo, we generate a ${repo_name}TestsConfig.cmake file which does find_package on all the modules that have been built as part of that repo. So that when standalone tests bare built for that repo, the modules are automatically found. qt_set_up_standalone_tests_build() is modified to be a no-op because it is not needed anymore. Its usage should be removed from all the other repos, and then removed from qtbase. Non-adjusted tests/CMakeLists.txt projects in other repositories should still be buildable with the current code, until they are updated to the new format. Adjust the Coin build instructions to build the standalone tests in a separate directory. Adjust pro2cmake to generate new structure for the tests/tests.pro projects. Adjust the qtbase tests project. Fixes: QTBUG-79239 Change-Id: Ib4b66bc772d8876cdcbae1e90ce5a5a5234fa675 Reviewed-by: Qt CMake Build Bot Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
2019-11-01 10:48:23 +00:00
# Make sure to not run detection when building standalone tests, because the detection was already
# done when initially configuring qtbase.
Add auto detection routines for android Add QtAutoDectect cmake which has routines to handle the vcpkg detection as well as set up some android configuration parameters. The latter will contribute towards keeping the cmake configuration commands shorter when targeting android. Change-Id: I721291c8dce39b5c298565a46867ddcab2df90e8 Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
2019-06-27 13:27:14 +00:00
function(qt_auto_detect_android)
Make standalone tests build via top level repo project Previously repo/tests/CMakeLists.txt was a standalone project on which CMake could be called. This was useful for Coin to be able to build and package only tests, but was a bit troublesome because that means having to specify the usual boilerplate like minimum CMake version, which packages to find in every tests.pro project. Instead of having a separate standalone project, modify the top level project and associated CMake code to allow passing a special QT_BUILD_STANDALONE_TESTS variable, which causes the top level project to build only tests, and find Qt in the previously installed qt location. This also means that when building a repo, we generate a ${repo_name}TestsConfig.cmake file which does find_package on all the modules that have been built as part of that repo. So that when standalone tests bare built for that repo, the modules are automatically found. qt_set_up_standalone_tests_build() is modified to be a no-op because it is not needed anymore. Its usage should be removed from all the other repos, and then removed from qtbase. Non-adjusted tests/CMakeLists.txt projects in other repositories should still be buildable with the current code, until they are updated to the new format. Adjust the Coin build instructions to build the standalone tests in a separate directory. Adjust pro2cmake to generate new structure for the tests/tests.pro projects. Adjust the qtbase tests project. Fixes: QTBUG-79239 Change-Id: Ib4b66bc772d8876cdcbae1e90ce5a5a5234fa675 Reviewed-by: Qt CMake Build Bot Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
2019-11-01 10:48:23 +00:00
if(DEFINED CMAKE_TOOLCHAIN_FILE AND NOT DEFINED QT_AUTODETECT_ANDROID
AND NOT QT_BUILD_STANDALONE_TESTS)
Add auto detection routines for android Add QtAutoDectect cmake which has routines to handle the vcpkg detection as well as set up some android configuration parameters. The latter will contribute towards keeping the cmake configuration commands shorter when targeting android. Change-Id: I721291c8dce39b5c298565a46867ddcab2df90e8 Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
2019-06-27 13:27:14 +00:00
file(READ ${CMAKE_TOOLCHAIN_FILE} toolchain_file_content OFFSET 0 LIMIT 80)
string(FIND ${toolchain_file_content} "The Android Open Source Project" find_result REVERSE)
if (NOT ${find_result} EQUAL -1)
set(android_detected TRUE)
else()
set(android_detected FALSE)
endif()
if(android_detected)
message(STATUS "Android toolchain file detected, checking configuration defaults...")
if(NOT DEFINED ANDROID_NATIVE_API_LEVEL)
message(STATUS "ANDROID_NATIVE_API_LEVEL was not specified, using API level 21 as default")
set(ANDROID_NATIVE_API_LEVEL 21 CACHE STRING "")
endif()
if(NOT DEFINED ANDROID_STL)
set(ANDROID_STL "c++_shared" CACHE STRING "")
endif()
endif()
set(QT_AUTODETECT_ANDROID ${android_detected} CACHE STRING "")
elseif (QT_AUTODETECT_ANDROID)
message(STATUS "Android toolchain file detected")
endif()
endfunction()
function(qt_auto_detect_vpckg)
Make standalone tests build via top level repo project Previously repo/tests/CMakeLists.txt was a standalone project on which CMake could be called. This was useful for Coin to be able to build and package only tests, but was a bit troublesome because that means having to specify the usual boilerplate like minimum CMake version, which packages to find in every tests.pro project. Instead of having a separate standalone project, modify the top level project and associated CMake code to allow passing a special QT_BUILD_STANDALONE_TESTS variable, which causes the top level project to build only tests, and find Qt in the previously installed qt location. This also means that when building a repo, we generate a ${repo_name}TestsConfig.cmake file which does find_package on all the modules that have been built as part of that repo. So that when standalone tests bare built for that repo, the modules are automatically found. qt_set_up_standalone_tests_build() is modified to be a no-op because it is not needed anymore. Its usage should be removed from all the other repos, and then removed from qtbase. Non-adjusted tests/CMakeLists.txt projects in other repositories should still be buildable with the current code, until they are updated to the new format. Adjust the Coin build instructions to build the standalone tests in a separate directory. Adjust pro2cmake to generate new structure for the tests/tests.pro projects. Adjust the qtbase tests project. Fixes: QTBUG-79239 Change-Id: Ib4b66bc772d8876cdcbae1e90ce5a5a5234fa675 Reviewed-by: Qt CMake Build Bot Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
2019-11-01 10:48:23 +00:00
if(DEFINED ENV{VCPKG_ROOT} AND NOT QT_BUILD_STANDALONE_TESTS)
Add auto detection routines for android Add QtAutoDectect cmake which has routines to handle the vcpkg detection as well as set up some android configuration parameters. The latter will contribute towards keeping the cmake configuration commands shorter when targeting android. Change-Id: I721291c8dce39b5c298565a46867ddcab2df90e8 Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
2019-06-27 13:27:14 +00:00
set(vcpkg_toolchain_file "$ENV{VCPKG_ROOT}/scripts/buildsystems/vcpkg.cmake")
get_filename_component(vcpkg_toolchain_file "${vcpkg_toolchain_file}" ABSOLUTE)
if(DEFINED CMAKE_TOOLCHAIN_FILE)
get_filename_component(supplied_toolchain_file "${CMAKE_TOOLCHAIN_FILE}" ABSOLUTE)
if(NOT supplied_toolchain_file STREQUAL vcpkg_toolchain_file)
set(VCPKG_CHAINLOAD_TOOLCHAIN_FILE "${CMAKE_TOOLCHAIN_FILE}" CACHE STRING "")
endif()
unset(supplied_toolchain_file)
endif()
set(CMAKE_TOOLCHAIN_FILE "${vcpkg_toolchain_file}" CACHE STRING "" FORCE)
message(STATUS "Using vcpkg from $ENV{VCPKG_ROOT}")
if(DEFINED ENV{VCPKG_DEFAULT_TRIPLET} AND NOT DEFINED VCPKG_TARGET_TRIPLET)
set(VCPKG_TARGET_TRIPLET "$ENV{VCPKG_DEFAULT_TRIPLET}" CACHE STRING "")
message(STATUS "Using vcpkg triplet ${VCPKG_TARGET_TRIPLET}")
endif()
unset(vcpkg_toolchain_file)
Make standalone tests build via top level repo project Previously repo/tests/CMakeLists.txt was a standalone project on which CMake could be called. This was useful for Coin to be able to build and package only tests, but was a bit troublesome because that means having to specify the usual boilerplate like minimum CMake version, which packages to find in every tests.pro project. Instead of having a separate standalone project, modify the top level project and associated CMake code to allow passing a special QT_BUILD_STANDALONE_TESTS variable, which causes the top level project to build only tests, and find Qt in the previously installed qt location. This also means that when building a repo, we generate a ${repo_name}TestsConfig.cmake file which does find_package on all the modules that have been built as part of that repo. So that when standalone tests bare built for that repo, the modules are automatically found. qt_set_up_standalone_tests_build() is modified to be a no-op because it is not needed anymore. Its usage should be removed from all the other repos, and then removed from qtbase. Non-adjusted tests/CMakeLists.txt projects in other repositories should still be buildable with the current code, until they are updated to the new format. Adjust the Coin build instructions to build the standalone tests in a separate directory. Adjust pro2cmake to generate new structure for the tests/tests.pro projects. Adjust the qtbase tests project. Fixes: QTBUG-79239 Change-Id: Ib4b66bc772d8876cdcbae1e90ce5a5a5234fa675 Reviewed-by: Qt CMake Build Bot Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
2019-11-01 10:48:23 +00:00
message(STATUS "CMAKE_TOOLCHAIN_FILE is: ${CMAKE_TOOLCHAIN_FILE}")
if(DEFINED VCPKG_CHAINLOAD_TOOLCHAIN_FILE)
message(STATUS "VCPKG_CHAINLOAD_TOOLCHAIN_FILE is: ${VCPKG_CHAINLOAD_TOOLCHAIN_FILE}")
endif()
Add auto detection routines for android Add QtAutoDectect cmake which has routines to handle the vcpkg detection as well as set up some android configuration parameters. The latter will contribute towards keeping the cmake configuration commands shorter when targeting android. Change-Id: I721291c8dce39b5c298565a46867ddcab2df90e8 Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
2019-06-27 13:27:14 +00:00
endif()
endfunction()
Add initial support for cross-building to iOS Tested locally with the following configurations: - iOS device builds (arm64) - iOS simulator builds (x86_64) - iOS simulator_and_device builds (fat arm64 and x86_64 archives) All iOS builds currently require a custom vcpkg fork which contains fixes for building the required 3rd party libraries. qtsvg, qtdeclarative, qtgraphicaleffects and qtquickcontrols2 have also been tested to build successfully. simulator_and_device builds are also supported, but require an umerged patch in upstream CMake as well as further patches to vcpkg. Task-number: QTBUG-75576 Change-Id: Icd29913fbbd52a60e07ea5253fd9c7af7f8ce44c Reviewed-by: Cristian Adam <cristian.adam@qt.io> Reviewed-by: Qt CMake Build Bot Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
2019-04-08 15:23:57 +00:00
function(qt_auto_detect_ios)
if(CMAKE_SYSTEM_NAME STREQUAL iOS
OR CMAKE_SYSTEM_NAME STREQUAL watchOS
OR CMAKE_SYSTEM_NAME STREQUAL tvOS)
message(STATUS "Using internal CMake ${CMAKE_SYSTEM_NAME} toolchain file.")
Add auto detection routines for android Add QtAutoDectect cmake which has routines to handle the vcpkg detection as well as set up some android configuration parameters. The latter will contribute towards keeping the cmake configuration commands shorter when targeting android. Change-Id: I721291c8dce39b5c298565a46867ddcab2df90e8 Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
2019-06-27 13:27:14 +00:00
Add initial support for cross-building to iOS Tested locally with the following configurations: - iOS device builds (arm64) - iOS simulator builds (x86_64) - iOS simulator_and_device builds (fat arm64 and x86_64 archives) All iOS builds currently require a custom vcpkg fork which contains fixes for building the required 3rd party libraries. qtsvg, qtdeclarative, qtgraphicaleffects and qtquickcontrols2 have also been tested to build successfully. simulator_and_device builds are also supported, but require an umerged patch in upstream CMake as well as further patches to vcpkg. Task-number: QTBUG-75576 Change-Id: Icd29913fbbd52a60e07ea5253fd9c7af7f8ce44c Reviewed-by: Cristian Adam <cristian.adam@qt.io> Reviewed-by: Qt CMake Build Bot Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
2019-04-08 15:23:57 +00:00
# The QT_UIKIT_SDK check simulates the input.sdk condition for simulator_and_device in
# configure.json.
# If the variable is explicitly provided, assume simulator_and_device to be off.
if(QT_UIKIT_SDK)
set(simulator_and_device OFF)
elseif(QT_FORCE_SIMULATOR_AND_DEVICE)
# TODO: Once we get simulator_and_device support in upstream CMake, only then allow
# usage of simulator_and_device without forcing.
set(simulator_and_device ON)
else()
# If QT_UIKIT_SDK is not provided, default to simulator.
set(simulator_and_device OFF)
set(QT_UIKIT_SDK "iphonesimulator" CACHE "STRING" "Chosen uikit SDK.")
endif()
message(STATUS "simulator_and_device set to: \"${simulator_and_device}\".")
# Choose relevant architectures.
# Using a non xcode generator requires explicit setting of the
# architectures, otherwise compilation fails with unknown defines.
if(CMAKE_SYSTEM_NAME STREQUAL iOS)
if(simulator_and_device)
set(osx_architectures "arm64;x86_64")
elseif(QT_UIKIT_SDK STREQUAL "iphoneos")
set(osx_architectures "arm64")
elseif(QT_UIKIT_SDK STREQUAL "iphonesimulator")
set(osx_architectures "x86_64")
else()
if(NOT DEFINED QT_UIKIT_SDK)
message(FATAL_ERROR "Please proviude a value for -DQT_UIKIT_SDK."
" Possible values: iphoneos, iphonesimulator.")
else()
message(FATAL_ERROR
"Unknown SDK argument given to QT_UIKIT_SDK: ${QT_UIKIT_SDK}.")
endif()
endif()
elseif(CMAKE_SYSTEM_NAME STREQUAL tvOS)
if(simulator_and_device)
set(osx_architectures "arm64;x86_64")
elseif(QT_UIKIT_SDK STREQUAL "appletvos")
set(osx_architectures "arm64")
elseif(QT_UIKIT_SDK STREQUAL "appletvsimulator")
set(osx_architectures "x86_64")
else()
if(NOT DEFINED QT_UIKIT_SDK)
message(FATAL_ERROR "Please proviude a value for -DQT_UIKIT_SDK."
" Possible values: appletvos, appletvsimulator.")
else()
message(FATAL_ERROR
"Unknown SDK argument given to QT_UIKIT_SDK: ${QT_UIKIT_SDK}.")
endif()
endif()
elseif(CMAKE_SYSTEM_NAME STREQUAL watchOS)
if(simulator_and_device)
set(osx_architectures "armv7k;i386")
elseif(QT_UIKIT_SDK STREQUAL "watchos")
set(osx_architectures "armv7k")
elseif(QT_UIKIT_SDK STREQUAL "watchsimulator")
set(osx_architectures "i386")
else()
if(NOT DEFINED QT_UIKIT_SDK)
message(FATAL_ERROR "Please proviude a value for -DQT_UIKIT_SDK."
" Possible values: watchos, watchsimulator.")
else()
message(FATAL_ERROR
"Unknown SDK argument given to QT_UIKIT_SDK: ${QT_UIKIT_SDK}.")
endif()
endif()
endif()
# For non simulator_and_device builds, we need to explicitly set the SYSROOT aka the sdk
# value.
if(QT_UIKIT_SDK)
set(CMAKE_OSX_SYSROOT "${QT_UIKIT_SDK}" CACHE STRING "")
endif()
message(STATUS "CMAKE_OSX_SYSROOT set to: \"${CMAKE_OSX_SYSROOT}\".")
message(STATUS "CMAKE_OSX_ARCHITECTURES set to: \"${osx_architectures}\".")
set(CMAKE_OSX_ARCHITECTURES "${osx_architectures}" CACHE STRING "")
if(NOT DEFINED BUILD_SHARED_LIBS)
set(BUILD_SHARED_LIBS OFF CACHE BOOL "Build Qt statically or dynamically" FORCE)
endif()
if(BUILD_SHARED_LIBS)
message(FATAL_ERROR
"Building Qt for ${CMAKE_SYSTEM_NAME} as shared libraries is not supported.")
endif()
endif()
endfunction()
Add initial support for CMake "Ninja Multi-Config" generator This allows doing debug_and_release builds with Ninja on all platforms. The "Ninja Multi-Config generator" is available starting with CMake 3.17. Desired configurations can be set via CMAKE_CONFIGURATION_TYPES. Possible values: "Release, Debug, RelWithDebInfo, MinRelSize". For example -DCMAKE_CONFIGURATION_TYPES="Release;Debug". The first configuration is the 'default' configuration which is built when calling ninja with no arguments. To build all targets of a certain configuration use "ninja all:Release" or "ninja all:Debug". To build all targets in all configurations use "ninja all:all". Note that the first configuration influences which configuration of tools will be used when building the libraries for all configurations. In simple terms, when configured with -DCMAKE_CONFIGURATION_TYPES="Release;Debug" the release version of moc is used by AUTOMOC. When configured with -DCMAKE_CONFIGURATION_TYPES="Debug;Release" the debug version of moc is used by AUTOMOC. Framework builds and Ninja Multi-Config don't currently work together due to multiple bugs in CMake, which ends up generating an invalid ninja file with duplicate rules. There are also issues with placement of the debug artifacts. This will be handled in a follow up patch after CMake is fixed. Task-number: QTBUG-76899 Change-Id: If224adc0b71b7d1d6606738101536146aa866cd7 Reviewed-by: Qt CMake Build Bot Reviewed-by: Leander Beernaert <leander.beernaert@qt.io> Reviewed-by: Cristian Adam <cristian.adam@qt.io>
2019-12-06 14:12:17 +00:00
function(qt_auto_detect_cmake_config)
if(CMAKE_CONFIGURATION_TYPES)
# Allow users to specify this option.
if(NOT QT_MULTI_CONFIG_FIRST_CONFIG)
list(GET CMAKE_CONFIGURATION_TYPES 0 first_config_type)
set(QT_MULTI_CONFIG_FIRST_CONFIG "${first_config_type}")
set(QT_MULTI_CONFIG_FIRST_CONFIG "${first_config_type}" PARENT_SCOPE)
endif()
set(CMAKE_TRY_COMPILE_CONFIGURATION "${QT_MULTI_CONFIG_FIRST_CONFIG}" PARENT_SCOPE)
if(CMAKE_GENERATOR STREQUAL "Ninja Multi-Config")
set(CMAKE_NINJA_MULTI_CROSS_CONFIG_ENABLE ON PARENT_SCOPE)
set(CMAKE_NINJA_MULTI_DEFAULT_BUILD_TYPE "${QT_MULTI_CONFIG_FIRST_CONFIG}" PARENT_SCOPE)
endif()
endif()
endfunction()
Set a default value for CMAKE_OSX_DEPLOYMENT_TARGET This replicates the behavior of QMAKE_MACOSX_DEPLOYMENT_TARGET in qmake. Change-Id: I273cd26994f2edfc52dc7b6278252c37b65b2356 Reviewed-by: Cristian Adam <cristian.adam@qt.io> Reviewed-by: Lars Knoll <lars.knoll@qt.io> Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
2020-02-14 10:40:03 +00:00
function(qt_auto_detect_darwin)
if(APPLE)
# If no CMAKE_OSX_DEPLOYMENT_TARGET is provided, default
# to a value that we choose. This replicates the behavior
# in mkspecs/common/macx.conf where
# QMAKE_MACOSX_DEPLOYMENT_TARGET is set.
CMake: Set minimum deployment target only for host macOS A future change will come that sets it for iOS and friends. Change-Id: I74b688ee62d24137e3cdf5475e1a9e858698ccf0 Reviewed-by: Leander Beernaert <leander.beernaert@qt.io> Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
2020-02-21 14:47:01 +00:00
# Currently only set for macOS, and not the mobile platforms.
if(NOT CMAKE_OSX_DEPLOYMENT_TARGET AND NOT CMAKE_SYSTEM_NAME)
Set a default value for CMAKE_OSX_DEPLOYMENT_TARGET This replicates the behavior of QMAKE_MACOSX_DEPLOYMENT_TARGET in qmake. Change-Id: I273cd26994f2edfc52dc7b6278252c37b65b2356 Reviewed-by: Cristian Adam <cristian.adam@qt.io> Reviewed-by: Lars Knoll <lars.knoll@qt.io> Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
2020-02-14 10:40:03 +00:00
set(CMAKE_OSX_DEPLOYMENT_TARGET "10.14" CACHE STRING
"Minimum OS X version to target for deployment (at runtime); newer APIs weak linked. Set to empty string for default value.")
endif()
message(STATUS "CMAKE_OSX_DEPLOYMENT_TARGET set to: \"${CMAKE_OSX_DEPLOYMENT_TARGET}\".")
endif()
endfunction()
Add initial support for CMake "Ninja Multi-Config" generator This allows doing debug_and_release builds with Ninja on all platforms. The "Ninja Multi-Config generator" is available starting with CMake 3.17. Desired configurations can be set via CMAKE_CONFIGURATION_TYPES. Possible values: "Release, Debug, RelWithDebInfo, MinRelSize". For example -DCMAKE_CONFIGURATION_TYPES="Release;Debug". The first configuration is the 'default' configuration which is built when calling ninja with no arguments. To build all targets of a certain configuration use "ninja all:Release" or "ninja all:Debug". To build all targets in all configurations use "ninja all:all". Note that the first configuration influences which configuration of tools will be used when building the libraries for all configurations. In simple terms, when configured with -DCMAKE_CONFIGURATION_TYPES="Release;Debug" the release version of moc is used by AUTOMOC. When configured with -DCMAKE_CONFIGURATION_TYPES="Debug;Release" the debug version of moc is used by AUTOMOC. Framework builds and Ninja Multi-Config don't currently work together due to multiple bugs in CMake, which ends up generating an invalid ninja file with duplicate rules. There are also issues with placement of the debug artifacts. This will be handled in a follow up patch after CMake is fixed. Task-number: QTBUG-76899 Change-Id: If224adc0b71b7d1d6606738101536146aa866cd7 Reviewed-by: Qt CMake Build Bot Reviewed-by: Leander Beernaert <leander.beernaert@qt.io> Reviewed-by: Cristian Adam <cristian.adam@qt.io>
2019-12-06 14:12:17 +00:00
qt_auto_detect_cmake_config()
Set a default value for CMAKE_OSX_DEPLOYMENT_TARGET This replicates the behavior of QMAKE_MACOSX_DEPLOYMENT_TARGET in qmake. Change-Id: I273cd26994f2edfc52dc7b6278252c37b65b2356 Reviewed-by: Cristian Adam <cristian.adam@qt.io> Reviewed-by: Lars Knoll <lars.knoll@qt.io> Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
2020-02-14 10:40:03 +00:00
qt_auto_detect_darwin()
Add initial support for cross-building to iOS Tested locally with the following configurations: - iOS device builds (arm64) - iOS simulator builds (x86_64) - iOS simulator_and_device builds (fat arm64 and x86_64 archives) All iOS builds currently require a custom vcpkg fork which contains fixes for building the required 3rd party libraries. qtsvg, qtdeclarative, qtgraphicaleffects and qtquickcontrols2 have also been tested to build successfully. simulator_and_device builds are also supported, but require an umerged patch in upstream CMake as well as further patches to vcpkg. Task-number: QTBUG-75576 Change-Id: Icd29913fbbd52a60e07ea5253fd9c7af7f8ce44c Reviewed-by: Cristian Adam <cristian.adam@qt.io> Reviewed-by: Qt CMake Build Bot Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
2019-04-08 15:23:57 +00:00
qt_auto_detect_ios()
Add auto detection routines for android Add QtAutoDectect cmake which has routines to handle the vcpkg detection as well as set up some android configuration parameters. The latter will contribute towards keeping the cmake configuration commands shorter when targeting android. Change-Id: I721291c8dce39b5c298565a46867ddcab2df90e8 Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
2019-06-27 13:27:14 +00:00
qt_auto_detect_android()
qt_auto_detect_vpckg()
Reference in New Issue Copy Permalink