AuroraMiddleware/qt5base-lts
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
aefb5c5a56
qt5base-lts/tests/auto/testlib/selftests/expected_float.txt

412 lines
24 KiB
Plaintext
Raw Normal View History

Split subtest selftest This test was attempting to verify two completely unrelated things, so this commit splits it into two tests. Also, printf calls are replaced by qDebug so that the test does not bypass the testlib loggers. Change-Id: I1a202af38ce2c69690a32d93405ba604ec6cabee Reviewed-on: http://codereview.qt-project.org/5178 Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
2011-09-20 01:56:31 +00:00
********* Start testing of tst_float *********
generate_expected_output.py: update generated expected_* files In selftests.qrc, imposed alphabetic order (on stem of name, then on suffix, effectively treating . as sorting before any letter) while removing old tests and adding new tests and data. Updated all non-csv files and added many missing files. (Not clear on csv support status; the script seems to have dropped it after 5.6, but the test still uses it.) Left expected_crashes* alone (no new files added, no update to old) as I don't get results resembling those anticipated. Omitted printdatatagswithglobaltags, printdatatags due to dangling hspace on output lines, which upset sanity-bot. A change to the test cpp is needed to make it viable to skip that dangling hspace. Change-Id: Iab3fb626c44a91c249b2fb626c12c75ea0317098 Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
2016-07-29 11:18:24 +00:00
Config: Using QtTest library
Split subtest selftest This test was attempting to verify two completely unrelated things, so this commit splits it into two tests. Also, printf calls are replaced by qDebug so that the test does not bypass the testlib loggers. Change-Id: I1a202af38ce2c69690a32d93405ba604ec6cabee Reviewed-on: http://codereview.qt-project.org/5178 Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
2011-09-20 01:56:31 +00:00
PASS : tst_float::initTestCase()
Add testlib selftests for double and for non-finite float and double Tidied up the existing float tests in the process. (In particular, s/SUCCESS/PASS/ since that matches real test output.) These verify that QCOMPARE() handles floats and doubles as intended. Extended the existing qFuzzyCompare tests to probe the boundaries of the ranges of values of both types, in the process. Revised the toString<double> that qCompare() uses to give enough precision to actually show some of the differences being tested there (12 digits, to match what qFuzzyCompare tests, so as to show different values rather than, e.g. 1e12 for both expected and actual) and to give consistent results for infinities and NaN (MinGW had eccentric versions for these, leading to different output from tests, which thus failed); did the latter also for toString<float> and fixed stray zeros in MinGW's exponents (which made a kludge in tst_selftest.cpp redundant, so I removed that, too). That's further complicated handling of floating-point types, so let's just keep an eye on how expensive that's getting by adding a benchmark test for QTest::toString(). Unfortunately, default settings only get runs that take modest numbers of milliseconds (some as low as 40) while increasing this with -minumumvalue 100 or more gets the process killed - and I'm unable to find out who's doing the killing (it's not QProcess::kill, ::kill or the QtTest WatchDog, as far as I can tell). So results are rather noisy; the integral tests exhibit speed-ups by factors up to 5, and slow-downs by factors up to 100, between runs with and without this change, which does not affec the integral tests. The relatively modest slow-downs and speed-ups in the floating point tests thus seem likely to be happenstance rather than signal. Change-Id: I4a6bbbab6a43bf14a4089e96238a7c8da2c3127e Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
2019-01-14 19:50:41 +00:00
FAIL! : tst_float::doubleComparisons(should FAIL 1) Compared doubles are not the same (fuzzy compare)
Actual (operandLeft) : 1
Expected (operandRight): 3
Loc: [qtbase/tests/auto/testlib/selftests/float/tst_float.cpp(0)]
QtTestLib: unify handling of float and double using suitable templates The QTest::qCompare() implementations were almost duplicates; pull the common code out into a templated version. Tweaked the QTest::toString() specialization for float and double (a macro) and fixed a bous modifier in double's format. The doubleComparisons and floatComparisons tests in the tst_float.cpp selftest shared a large block of tests in common, aside from the difference of type. Break this out into a templated static function to save duplication. This prepares the way for using the same templated code for qfloat16. Change-Id: I2823fd006910c5ff88335d625d1fa05cb7753513 Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
2019-02-21 19:53:15 +00:00
PASS : tst_float::doubleComparisons(should PASS 1)
Add testlib selftests for double and for non-finite float and double Tidied up the existing float tests in the process. (In particular, s/SUCCESS/PASS/ since that matches real test output.) These verify that QCOMPARE() handles floats and doubles as intended. Extended the existing qFuzzyCompare tests to probe the boundaries of the ranges of values of both types, in the process. Revised the toString<double> that qCompare() uses to give enough precision to actually show some of the differences being tested there (12 digits, to match what qFuzzyCompare tests, so as to show different values rather than, e.g. 1e12 for both expected and actual) and to give consistent results for infinities and NaN (MinGW had eccentric versions for these, leading to different output from tests, which thus failed); did the latter also for toString<float> and fixed stray zeros in MinGW's exponents (which made a kludge in tst_selftest.cpp redundant, so I removed that, too). That's further complicated handling of floating-point types, so let's just keep an eye on how expensive that's getting by adding a benchmark test for QTest::toString(). Unfortunately, default settings only get runs that take modest numbers of milliseconds (some as low as 40) while increasing this with -minumumvalue 100 or more gets the process killed - and I'm unable to find out who's doing the killing (it's not QProcess::kill, ::kill or the QtTest WatchDog, as far as I can tell). So results are rather noisy; the integral tests exhibit speed-ups by factors up to 5, and slow-downs by factors up to 100, between runs with and without this change, which does not affec the integral tests. The relatively modest slow-downs and speed-ups in the floating point tests thus seem likely to be happenstance rather than signal. Change-Id: I4a6bbbab6a43bf14a4089e96238a7c8da2c3127e Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
2019-01-14 19:50:41 +00:00
FAIL! : tst_float::doubleComparisons(should FAIL 2) Compared doubles are not the same (fuzzy compare)
Actual (operandLeft) : 1e-07
Expected (operandRight): 3e-07
Loc: [qtbase/tests/auto/testlib/selftests/float/tst_float.cpp(0)]
PASS : tst_float::doubleComparisons(should PASS 2)
FAIL! : tst_float::doubleComparisons(should FAIL 3) Compared doubles are not the same (fuzzy compare)
Actual (operandLeft) : 999999999999
Expected (operandRight): 999999999998
Loc: [qtbase/tests/auto/testlib/selftests/float/tst_float.cpp(0)]
PASS : tst_float::doubleComparisons(should PASS 3)
FAIL! : tst_float::doubleComparisons(should FAIL 4) Compared doubles are not the same (fuzzy compare)
QCOMPARE: treat values as equal if qFuzzyIsNull(each) We hope this shall avoid some flaky failures noticed in quick tests, e.g. tst_QQuickMenu::Material::subMenuPosition(cascading,flip) was recently seen failing with 3.88e-11 != 0. This required some revision to test data in the testlib selftest for floats; the resulting expected output differs in details but not in which tests pass or fail. QEMU, naturally, made life difficult, requiring special-case code in the test-driver. [ChangeLog][QtTestLib][QCOMPARE] QCOMPARE() now treats its values as equal when qFuzzyIsNull() is true for both of them. Change-Id: Icc6ad5164b609937eddbe39cc69120f0abf0f3b4 Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org> Reviewed-by: Mitch Curtis <mitch.curtis@qt.io>
2020-04-15 11:10:31 +00:00
Actual (operandLeft) : 1e-12
Expected (operandRight): 9.99999999999e-13
Add testlib selftests for double and for non-finite float and double Tidied up the existing float tests in the process. (In particular, s/SUCCESS/PASS/ since that matches real test output.) These verify that QCOMPARE() handles floats and doubles as intended. Extended the existing qFuzzyCompare tests to probe the boundaries of the ranges of values of both types, in the process. Revised the toString<double> that qCompare() uses to give enough precision to actually show some of the differences being tested there (12 digits, to match what qFuzzyCompare tests, so as to show different values rather than, e.g. 1e12 for both expected and actual) and to give consistent results for infinities and NaN (MinGW had eccentric versions for these, leading to different output from tests, which thus failed); did the latter also for toString<float> and fixed stray zeros in MinGW's exponents (which made a kludge in tst_selftest.cpp redundant, so I removed that, too). That's further complicated handling of floating-point types, so let's just keep an eye on how expensive that's getting by adding a benchmark test for QTest::toString(). Unfortunately, default settings only get runs that take modest numbers of milliseconds (some as low as 40) while increasing this with -minumumvalue 100 or more gets the process killed - and I'm unable to find out who's doing the killing (it's not QProcess::kill, ::kill or the QtTest WatchDog, as far as I can tell). So results are rather noisy; the integral tests exhibit speed-ups by factors up to 5, and slow-downs by factors up to 100, between runs with and without this change, which does not affec the integral tests. The relatively modest slow-downs and speed-ups in the floating point tests thus seem likely to be happenstance rather than signal. Change-Id: I4a6bbbab6a43bf14a4089e96238a7c8da2c3127e Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
2019-01-14 19:50:41 +00:00
Loc: [qtbase/tests/auto/testlib/selftests/float/tst_float.cpp(0)]
PASS : tst_float::doubleComparisons(should PASS 4)
FAIL! : tst_float::doubleComparisons(should FAIL 5) Compared doubles are not the same (fuzzy compare)
Actual (operandLeft) : 9.99999999999e+306
Expected (operandRight): 9.99999999997e+306
Loc: [qtbase/tests/auto/testlib/selftests/float/tst_float.cpp(0)]
PASS : tst_float::doubleComparisons(should PASS: NaN == NaN)
FAIL! : tst_float::doubleComparisons(should FAIL: NaN != 0) Compared doubles are not the same (fuzzy compare)
Actual (operandLeft) : nan
Expected (operandRight): 0
Loc: [qtbase/tests/auto/testlib/selftests/float/tst_float.cpp(0)]
FAIL! : tst_float::doubleComparisons(should FAIL: 0 != NaN) Compared doubles are not the same (fuzzy compare)
Actual (operandLeft) : 0
Expected (operandRight): nan
Loc: [qtbase/tests/auto/testlib/selftests/float/tst_float.cpp(0)]
FAIL! : tst_float::doubleComparisons(should FAIL: NaN != 1) Compared doubles are not the same (fuzzy compare)
Actual (operandLeft) : nan
Expected (operandRight): 1
Loc: [qtbase/tests/auto/testlib/selftests/float/tst_float.cpp(0)]
FAIL! : tst_float::doubleComparisons(should FAIL: 1 != NaN) Compared doubles are not the same (fuzzy compare)
Actual (operandLeft) : 1
Expected (operandRight): nan
Loc: [qtbase/tests/auto/testlib/selftests/float/tst_float.cpp(0)]
PASS : tst_float::doubleComparisons(should PASS: inf == inf)
PASS : tst_float::doubleComparisons(should PASS: -inf == -inf)
FAIL! : tst_float::doubleComparisons(should FAIL: inf != -inf) Compared doubles are not the same (fuzzy compare)
Actual (operandLeft) : inf
Expected (operandRight): -inf
Loc: [qtbase/tests/auto/testlib/selftests/float/tst_float.cpp(0)]
FAIL! : tst_float::doubleComparisons(should FAIL: -inf != inf) Compared doubles are not the same (fuzzy compare)
Actual (operandLeft) : -inf
Expected (operandRight): inf
Loc: [qtbase/tests/auto/testlib/selftests/float/tst_float.cpp(0)]
FAIL! : tst_float::doubleComparisons(should FAIL: inf != nan) Compared doubles are not the same (fuzzy compare)
Actual (operandLeft) : inf
Expected (operandRight): nan
Loc: [qtbase/tests/auto/testlib/selftests/float/tst_float.cpp(0)]
FAIL! : tst_float::doubleComparisons(should FAIL: nan != inf) Compared doubles are not the same (fuzzy compare)
Actual (operandLeft) : nan
Expected (operandRight): inf
Loc: [qtbase/tests/auto/testlib/selftests/float/tst_float.cpp(0)]
FAIL! : tst_float::doubleComparisons(should FAIL: -inf != nan) Compared doubles are not the same (fuzzy compare)
Actual (operandLeft) : -inf
Expected (operandRight): nan
Loc: [qtbase/tests/auto/testlib/selftests/float/tst_float.cpp(0)]
FAIL! : tst_float::doubleComparisons(should FAIL: nan != -inf) Compared doubles are not the same (fuzzy compare)
Actual (operandLeft) : nan
Expected (operandRight): -inf
Loc: [qtbase/tests/auto/testlib/selftests/float/tst_float.cpp(0)]
FAIL! : tst_float::doubleComparisons(should FAIL: inf != 0) Compared doubles are not the same (fuzzy compare)
Actual (operandLeft) : inf
Expected (operandRight): 0
Loc: [qtbase/tests/auto/testlib/selftests/float/tst_float.cpp(0)]
FAIL! : tst_float::doubleComparisons(should FAIL: 0 != inf) Compared doubles are not the same (fuzzy compare)
Actual (operandLeft) : 0
Expected (operandRight): inf
Loc: [qtbase/tests/auto/testlib/selftests/float/tst_float.cpp(0)]
FAIL! : tst_float::doubleComparisons(should FAIL: -inf != 0) Compared doubles are not the same (fuzzy compare)
Actual (operandLeft) : -inf
Expected (operandRight): 0
Loc: [qtbase/tests/auto/testlib/selftests/float/tst_float.cpp(0)]
FAIL! : tst_float::doubleComparisons(should FAIL: 0 != -inf) Compared doubles are not the same (fuzzy compare)
Actual (operandLeft) : 0
Expected (operandRight): -inf
Loc: [qtbase/tests/auto/testlib/selftests/float/tst_float.cpp(0)]
FAIL! : tst_float::doubleComparisons(should FAIL: inf != 1) Compared doubles are not the same (fuzzy compare)
Actual (operandLeft) : inf
Expected (operandRight): 1
Loc: [qtbase/tests/auto/testlib/selftests/float/tst_float.cpp(0)]
FAIL! : tst_float::doubleComparisons(should FAIL: 1 != inf) Compared doubles are not the same (fuzzy compare)
Actual (operandLeft) : 1
Expected (operandRight): inf
Loc: [qtbase/tests/auto/testlib/selftests/float/tst_float.cpp(0)]
FAIL! : tst_float::doubleComparisons(should FAIL: -inf != 1) Compared doubles are not the same (fuzzy compare)
Actual (operandLeft) : -inf
Expected (operandRight): 1
Loc: [qtbase/tests/auto/testlib/selftests/float/tst_float.cpp(0)]
FAIL! : tst_float::doubleComparisons(should FAIL: 1 != -inf) Compared doubles are not the same (fuzzy compare)
Actual (operandLeft) : 1
Expected (operandRight): -inf
Loc: [qtbase/tests/auto/testlib/selftests/float/tst_float.cpp(0)]
FAIL! : tst_float::doubleComparisons(should FAIL: inf != max) Compared doubles are not the same (fuzzy compare)
Actual (operandLeft) : inf
Expected (operandRight): 1.79769313486e+308
Loc: [qtbase/tests/auto/testlib/selftests/float/tst_float.cpp(0)]
FAIL! : tst_float::doubleComparisons(should FAIL: inf != -max) Compared doubles are not the same (fuzzy compare)
Actual (operandLeft) : inf
Expected (operandRight): -1.79769313486e+308
Loc: [qtbase/tests/auto/testlib/selftests/float/tst_float.cpp(0)]
FAIL! : tst_float::doubleComparisons(should FAIL: max != inf) Compared doubles are not the same (fuzzy compare)
Actual (operandLeft) : 1.79769313486e+308
Expected (operandRight): inf
Loc: [qtbase/tests/auto/testlib/selftests/float/tst_float.cpp(0)]
FAIL! : tst_float::doubleComparisons(should FAIL: -max != inf) Compared doubles are not the same (fuzzy compare)
Actual (operandLeft) : -1.79769313486e+308
Expected (operandRight): inf
Loc: [qtbase/tests/auto/testlib/selftests/float/tst_float.cpp(0)]
FAIL! : tst_float::doubleComparisons(should FAIL: -inf != max) Compared doubles are not the same (fuzzy compare)
Actual (operandLeft) : -inf
Expected (operandRight): 1.79769313486e+308
Loc: [qtbase/tests/auto/testlib/selftests/float/tst_float.cpp(0)]
FAIL! : tst_float::doubleComparisons(should FAIL: -inf != -max) Compared doubles are not the same (fuzzy compare)
Actual (operandLeft) : -inf
Expected (operandRight): -1.79769313486e+308
Loc: [qtbase/tests/auto/testlib/selftests/float/tst_float.cpp(0)]
FAIL! : tst_float::doubleComparisons(should FAIL: max != -inf) Compared doubles are not the same (fuzzy compare)
Actual (operandLeft) : 1.79769313486e+308
Expected (operandRight): -inf
Loc: [qtbase/tests/auto/testlib/selftests/float/tst_float.cpp(0)]
FAIL! : tst_float::doubleComparisons(should FAIL: -max != -inf) Compared doubles are not the same (fuzzy compare)
Actual (operandLeft) : -1.79769313486e+308
Expected (operandRight): -inf
Loc: [qtbase/tests/auto/testlib/selftests/float/tst_float.cpp(0)]
Improve float selftest Correct a bug in the test and use unique names for data rows. The bug was that the test assumed that QCOMPARE for float values 100001 and 100002 would fail, but it actually succeeds. QCOMPARE for floats uses qFuzzyCompare(), which succeeds if the numbers differ by no more than 1/100,000th of the smaller value. Thus QCOMPARE(100001, 100002) passes, while QCOMPARE(99998, 99999) fails. Change-Id: Ia35d3126c2e3ebe91d64daa309048514a365d9fb Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
2012-02-03 05:43:28 +00:00
FAIL! : tst_float::floatComparisons(should FAIL 1) Compared floats are not the same (fuzzy compare)
TestLib: align the colons so the "actual" and "expected" align too Before: FAIL! tst_testcase::testcase: Compared values are not the same Actual (actual): F0O Expected (expected): FOO Now: FAIL! tst_testcase::testcase: Compared values are not the same Actual (actual) : F0O Expected (expected): FOO Change-Id: I6f0768e4ef53e065b85a56879cecbad06fa34aef Reviewed-by: Jason McDonald <macadder1@gmail.com>
2013-07-01 22:58:40 +00:00
Actual (operandLeft) : 1
Split subtest selftest This test was attempting to verify two completely unrelated things, so this commit splits it into two tests. Also, printf calls are replaced by qDebug so that the test does not bypass the testlib loggers. Change-Id: I1a202af38ce2c69690a32d93405ba604ec6cabee Reviewed-on: http://codereview.qt-project.org/5178 Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
2011-09-20 01:56:31 +00:00
Expected (operandRight): 3
generate_expected_output.py: update generated expected_* files In selftests.qrc, imposed alphabetic order (on stem of name, then on suffix, effectively treating . as sorting before any letter) while removing old tests and adding new tests and data. Updated all non-csv files and added many missing files. (Not clear on csv support status; the script seems to have dropped it after 5.6, but the test still uses it.) Left expected_crashes* alone (no new files added, no update to old) as I don't get results resembling those anticipated. Omitted printdatatagswithglobaltags, printdatatags due to dangling hspace on output lines, which upset sanity-bot. A change to the test cpp is needed to make it viable to skip that dangling hspace. Change-Id: Iab3fb626c44a91c249b2fb626c12c75ea0317098 Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
2016-07-29 11:18:24 +00:00
Loc: [qtbase/tests/auto/testlib/selftests/float/tst_float.cpp(0)]
Add testlib selftests for double and for non-finite float and double Tidied up the existing float tests in the process. (In particular, s/SUCCESS/PASS/ since that matches real test output.) These verify that QCOMPARE() handles floats and doubles as intended. Extended the existing qFuzzyCompare tests to probe the boundaries of the ranges of values of both types, in the process. Revised the toString<double> that qCompare() uses to give enough precision to actually show some of the differences being tested there (12 digits, to match what qFuzzyCompare tests, so as to show different values rather than, e.g. 1e12 for both expected and actual) and to give consistent results for infinities and NaN (MinGW had eccentric versions for these, leading to different output from tests, which thus failed); did the latter also for toString<float> and fixed stray zeros in MinGW's exponents (which made a kludge in tst_selftest.cpp redundant, so I removed that, too). That's further complicated handling of floating-point types, so let's just keep an eye on how expensive that's getting by adding a benchmark test for QTest::toString(). Unfortunately, default settings only get runs that take modest numbers of milliseconds (some as low as 40) while increasing this with -minumumvalue 100 or more gets the process killed - and I'm unable to find out who's doing the killing (it's not QProcess::kill, ::kill or the QtTest WatchDog, as far as I can tell). So results are rather noisy; the integral tests exhibit speed-ups by factors up to 5, and slow-downs by factors up to 100, between runs with and without this change, which does not affec the integral tests. The relatively modest slow-downs and speed-ups in the floating point tests thus seem likely to be happenstance rather than signal. Change-Id: I4a6bbbab6a43bf14a4089e96238a7c8da2c3127e Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
2019-01-14 19:50:41 +00:00
PASS : tst_float::floatComparisons(should PASS 1)
Improve float selftest Correct a bug in the test and use unique names for data rows. The bug was that the test assumed that QCOMPARE for float values 100001 and 100002 would fail, but it actually succeeds. QCOMPARE for floats uses qFuzzyCompare(), which succeeds if the numbers differ by no more than 1/100,000th of the smaller value. Thus QCOMPARE(100001, 100002) passes, while QCOMPARE(99998, 99999) fails. Change-Id: Ia35d3126c2e3ebe91d64daa309048514a365d9fb Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
2012-02-03 05:43:28 +00:00
FAIL! : tst_float::floatComparisons(should FAIL 2) Compared floats are not the same (fuzzy compare)
QCOMPARE: treat values as equal if qFuzzyIsNull(each) We hope this shall avoid some flaky failures noticed in quick tests, e.g. tst_QQuickMenu::Material::subMenuPosition(cascading,flip) was recently seen failing with 3.88e-11 != 0. This required some revision to test data in the testlib selftest for floats; the resulting expected output differs in details but not in which tests pass or fail. QEMU, naturally, made life difficult, requiring special-case code in the test-driver. [ChangeLog][QtTestLib][QCOMPARE] QCOMPARE() now treats its values as equal when qFuzzyIsNull() is true for both of them. Change-Id: Icc6ad5164b609937eddbe39cc69120f0abf0f3b4 Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org> Reviewed-by: Mitch Curtis <mitch.curtis@qt.io>
2020-04-15 11:10:31 +00:00
Actual (operandLeft) : 1e-05
Expected (operandRight): 3e-05
generate_expected_output.py: update generated expected_* files In selftests.qrc, imposed alphabetic order (on stem of name, then on suffix, effectively treating . as sorting before any letter) while removing old tests and adding new tests and data. Updated all non-csv files and added many missing files. (Not clear on csv support status; the script seems to have dropped it after 5.6, but the test still uses it.) Left expected_crashes* alone (no new files added, no update to old) as I don't get results resembling those anticipated. Omitted printdatatagswithglobaltags, printdatatags due to dangling hspace on output lines, which upset sanity-bot. A change to the test cpp is needed to make it viable to skip that dangling hspace. Change-Id: Iab3fb626c44a91c249b2fb626c12c75ea0317098 Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
2016-07-29 11:18:24 +00:00
Loc: [qtbase/tests/auto/testlib/selftests/float/tst_float.cpp(0)]
Add testlib selftests for double and for non-finite float and double Tidied up the existing float tests in the process. (In particular, s/SUCCESS/PASS/ since that matches real test output.) These verify that QCOMPARE() handles floats and doubles as intended. Extended the existing qFuzzyCompare tests to probe the boundaries of the ranges of values of both types, in the process. Revised the toString<double> that qCompare() uses to give enough precision to actually show some of the differences being tested there (12 digits, to match what qFuzzyCompare tests, so as to show different values rather than, e.g. 1e12 for both expected and actual) and to give consistent results for infinities and NaN (MinGW had eccentric versions for these, leading to different output from tests, which thus failed); did the latter also for toString<float> and fixed stray zeros in MinGW's exponents (which made a kludge in tst_selftest.cpp redundant, so I removed that, too). That's further complicated handling of floating-point types, so let's just keep an eye on how expensive that's getting by adding a benchmark test for QTest::toString(). Unfortunately, default settings only get runs that take modest numbers of milliseconds (some as low as 40) while increasing this with -minumumvalue 100 or more gets the process killed - and I'm unable to find out who's doing the killing (it's not QProcess::kill, ::kill or the QtTest WatchDog, as far as I can tell). So results are rather noisy; the integral tests exhibit speed-ups by factors up to 5, and slow-downs by factors up to 100, between runs with and without this change, which does not affec the integral tests. The relatively modest slow-downs and speed-ups in the floating point tests thus seem likely to be happenstance rather than signal. Change-Id: I4a6bbbab6a43bf14a4089e96238a7c8da2c3127e Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
2019-01-14 19:50:41 +00:00
PASS : tst_float::floatComparisons(should PASS 2)
Improve float selftest Correct a bug in the test and use unique names for data rows. The bug was that the test assumed that QCOMPARE for float values 100001 and 100002 would fail, but it actually succeeds. QCOMPARE for floats uses qFuzzyCompare(), which succeeds if the numbers differ by no more than 1/100,000th of the smaller value. Thus QCOMPARE(100001, 100002) passes, while QCOMPARE(99998, 99999) fails. Change-Id: Ia35d3126c2e3ebe91d64daa309048514a365d9fb Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
2012-02-03 05:43:28 +00:00
FAIL! : tst_float::floatComparisons(should FAIL 3) Compared floats are not the same (fuzzy compare)
Add testlib selftests for double and for non-finite float and double Tidied up the existing float tests in the process. (In particular, s/SUCCESS/PASS/ since that matches real test output.) These verify that QCOMPARE() handles floats and doubles as intended. Extended the existing qFuzzyCompare tests to probe the boundaries of the ranges of values of both types, in the process. Revised the toString<double> that qCompare() uses to give enough precision to actually show some of the differences being tested there (12 digits, to match what qFuzzyCompare tests, so as to show different values rather than, e.g. 1e12 for both expected and actual) and to give consistent results for infinities and NaN (MinGW had eccentric versions for these, leading to different output from tests, which thus failed); did the latter also for toString<float> and fixed stray zeros in MinGW's exponents (which made a kludge in tst_selftest.cpp redundant, so I removed that, too). That's further complicated handling of floating-point types, so let's just keep an eye on how expensive that's getting by adding a benchmark test for QTest::toString(). Unfortunately, default settings only get runs that take modest numbers of milliseconds (some as low as 40) while increasing this with -minumumvalue 100 or more gets the process killed - and I'm unable to find out who's doing the killing (it's not QProcess::kill, ::kill or the QtTest WatchDog, as far as I can tell). So results are rather noisy; the integral tests exhibit speed-ups by factors up to 5, and slow-downs by factors up to 100, between runs with and without this change, which does not affec the integral tests. The relatively modest slow-downs and speed-ups in the floating point tests thus seem likely to be happenstance rather than signal. Change-Id: I4a6bbbab6a43bf14a4089e96238a7c8da2c3127e Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
2019-01-14 19:50:41 +00:00
Actual (operandLeft) : 99999
Expected (operandRight): 99998
Loc: [qtbase/tests/auto/testlib/selftests/float/tst_float.cpp(0)]
PASS : tst_float::floatComparisons(should PASS 3)
FAIL! : tst_float::floatComparisons(should FAIL 4) Compared floats are not the same (fuzzy compare)
QCOMPARE: treat values as equal if qFuzzyIsNull(each) We hope this shall avoid some flaky failures noticed in quick tests, e.g. tst_QQuickMenu::Material::subMenuPosition(cascading,flip) was recently seen failing with 3.88e-11 != 0. This required some revision to test data in the testlib selftest for floats; the resulting expected output differs in details but not in which tests pass or fail. QEMU, naturally, made life difficult, requiring special-case code in the test-driver. [ChangeLog][QtTestLib][QCOMPARE] QCOMPARE() now treats its values as equal when qFuzzyIsNull() is true for both of them. Change-Id: Icc6ad5164b609937eddbe39cc69120f0abf0f3b4 Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org> Reviewed-by: Mitch Curtis <mitch.curtis@qt.io>
2020-04-15 11:10:31 +00:00
Actual (operandLeft) : 1.00001e-05
Expected (operandRight): 9.9999e-06
Add testlib selftests for double and for non-finite float and double Tidied up the existing float tests in the process. (In particular, s/SUCCESS/PASS/ since that matches real test output.) These verify that QCOMPARE() handles floats and doubles as intended. Extended the existing qFuzzyCompare tests to probe the boundaries of the ranges of values of both types, in the process. Revised the toString<double> that qCompare() uses to give enough precision to actually show some of the differences being tested there (12 digits, to match what qFuzzyCompare tests, so as to show different values rather than, e.g. 1e12 for both expected and actual) and to give consistent results for infinities and NaN (MinGW had eccentric versions for these, leading to different output from tests, which thus failed); did the latter also for toString<float> and fixed stray zeros in MinGW's exponents (which made a kludge in tst_selftest.cpp redundant, so I removed that, too). That's further complicated handling of floating-point types, so let's just keep an eye on how expensive that's getting by adding a benchmark test for QTest::toString(). Unfortunately, default settings only get runs that take modest numbers of milliseconds (some as low as 40) while increasing this with -minumumvalue 100 or more gets the process killed - and I'm unable to find out who's doing the killing (it's not QProcess::kill, ::kill or the QtTest WatchDog, as far as I can tell). So results are rather noisy; the integral tests exhibit speed-ups by factors up to 5, and slow-downs by factors up to 100, between runs with and without this change, which does not affec the integral tests. The relatively modest slow-downs and speed-ups in the floating point tests thus seem likely to be happenstance rather than signal. Change-Id: I4a6bbbab6a43bf14a4089e96238a7c8da2c3127e Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
2019-01-14 19:50:41 +00:00
Loc: [qtbase/tests/auto/testlib/selftests/float/tst_float.cpp(0)]
PASS : tst_float::floatComparisons(should PASS 4)
FAIL! : tst_float::floatComparisons(should FAIL 5) Compared floats are not the same (fuzzy compare)
Actual (operandLeft) : 9.9999e+37
Expected (operandRight): 9.9997e+37
Loc: [qtbase/tests/auto/testlib/selftests/float/tst_float.cpp(0)]
PASS : tst_float::floatComparisons(should PASS: NaN == NaN)
FAIL! : tst_float::floatComparisons(should FAIL: NaN != 0) Compared floats are not the same (fuzzy compare)
Actual (operandLeft) : nan
Expected (operandRight): 0
Loc: [qtbase/tests/auto/testlib/selftests/float/tst_float.cpp(0)]
FAIL! : tst_float::floatComparisons(should FAIL: 0 != NaN) Compared floats are not the same (fuzzy compare)
Actual (operandLeft) : 0
Expected (operandRight): nan
Loc: [qtbase/tests/auto/testlib/selftests/float/tst_float.cpp(0)]
FAIL! : tst_float::floatComparisons(should FAIL: NaN != 1) Compared floats are not the same (fuzzy compare)
Actual (operandLeft) : nan
Expected (operandRight): 1
Loc: [qtbase/tests/auto/testlib/selftests/float/tst_float.cpp(0)]
FAIL! : tst_float::floatComparisons(should FAIL: 1 != NaN) Compared floats are not the same (fuzzy compare)
Actual (operandLeft) : 1
Expected (operandRight): nan
Loc: [qtbase/tests/auto/testlib/selftests/float/tst_float.cpp(0)]
PASS : tst_float::floatComparisons(should PASS: inf == inf)
PASS : tst_float::floatComparisons(should PASS: -inf == -inf)
FAIL! : tst_float::floatComparisons(should FAIL: inf != -inf) Compared floats are not the same (fuzzy compare)
Actual (operandLeft) : inf
Expected (operandRight): -inf
Loc: [qtbase/tests/auto/testlib/selftests/float/tst_float.cpp(0)]
FAIL! : tst_float::floatComparisons(should FAIL: -inf != inf) Compared floats are not the same (fuzzy compare)
Actual (operandLeft) : -inf
Expected (operandRight): inf
Loc: [qtbase/tests/auto/testlib/selftests/float/tst_float.cpp(0)]
FAIL! : tst_float::floatComparisons(should FAIL: inf != nan) Compared floats are not the same (fuzzy compare)
Actual (operandLeft) : inf
Expected (operandRight): nan
Loc: [qtbase/tests/auto/testlib/selftests/float/tst_float.cpp(0)]
FAIL! : tst_float::floatComparisons(should FAIL: nan != inf) Compared floats are not the same (fuzzy compare)
Actual (operandLeft) : nan
Expected (operandRight): inf
Loc: [qtbase/tests/auto/testlib/selftests/float/tst_float.cpp(0)]
FAIL! : tst_float::floatComparisons(should FAIL: -inf != nan) Compared floats are not the same (fuzzy compare)
Actual (operandLeft) : -inf
Expected (operandRight): nan
Loc: [qtbase/tests/auto/testlib/selftests/float/tst_float.cpp(0)]
FAIL! : tst_float::floatComparisons(should FAIL: nan != -inf) Compared floats are not the same (fuzzy compare)
Actual (operandLeft) : nan
Expected (operandRight): -inf
Loc: [qtbase/tests/auto/testlib/selftests/float/tst_float.cpp(0)]
FAIL! : tst_float::floatComparisons(should FAIL: inf != 0) Compared floats are not the same (fuzzy compare)
Actual (operandLeft) : inf
Expected (operandRight): 0
Loc: [qtbase/tests/auto/testlib/selftests/float/tst_float.cpp(0)]
FAIL! : tst_float::floatComparisons(should FAIL: 0 != inf) Compared floats are not the same (fuzzy compare)
Actual (operandLeft) : 0
Expected (operandRight): inf
Loc: [qtbase/tests/auto/testlib/selftests/float/tst_float.cpp(0)]
FAIL! : tst_float::floatComparisons(should FAIL: -inf != 0) Compared floats are not the same (fuzzy compare)
Actual (operandLeft) : -inf
Expected (operandRight): 0
Loc: [qtbase/tests/auto/testlib/selftests/float/tst_float.cpp(0)]
FAIL! : tst_float::floatComparisons(should FAIL: 0 != -inf) Compared floats are not the same (fuzzy compare)
Actual (operandLeft) : 0
Expected (operandRight): -inf
Loc: [qtbase/tests/auto/testlib/selftests/float/tst_float.cpp(0)]
FAIL! : tst_float::floatComparisons(should FAIL: inf != 1) Compared floats are not the same (fuzzy compare)
Actual (operandLeft) : inf
Expected (operandRight): 1
Loc: [qtbase/tests/auto/testlib/selftests/float/tst_float.cpp(0)]
FAIL! : tst_float::floatComparisons(should FAIL: 1 != inf) Compared floats are not the same (fuzzy compare)
Actual (operandLeft) : 1
Expected (operandRight): inf
Loc: [qtbase/tests/auto/testlib/selftests/float/tst_float.cpp(0)]
FAIL! : tst_float::floatComparisons(should FAIL: -inf != 1) Compared floats are not the same (fuzzy compare)
Actual (operandLeft) : -inf
Expected (operandRight): 1
Loc: [qtbase/tests/auto/testlib/selftests/float/tst_float.cpp(0)]
FAIL! : tst_float::floatComparisons(should FAIL: 1 != -inf) Compared floats are not the same (fuzzy compare)
Actual (operandLeft) : 1
Expected (operandRight): -inf
Loc: [qtbase/tests/auto/testlib/selftests/float/tst_float.cpp(0)]
FAIL! : tst_float::floatComparisons(should FAIL: inf != max) Compared floats are not the same (fuzzy compare)
Actual (operandLeft) : inf
Expected (operandRight): 3.40282e+38
Loc: [qtbase/tests/auto/testlib/selftests/float/tst_float.cpp(0)]
FAIL! : tst_float::floatComparisons(should FAIL: inf != -max) Compared floats are not the same (fuzzy compare)
Actual (operandLeft) : inf
Expected (operandRight): -3.40282e+38
Loc: [qtbase/tests/auto/testlib/selftests/float/tst_float.cpp(0)]
FAIL! : tst_float::floatComparisons(should FAIL: max != inf) Compared floats are not the same (fuzzy compare)
Actual (operandLeft) : 3.40282e+38
Expected (operandRight): inf
Loc: [qtbase/tests/auto/testlib/selftests/float/tst_float.cpp(0)]
FAIL! : tst_float::floatComparisons(should FAIL: -max != inf) Compared floats are not the same (fuzzy compare)
Actual (operandLeft) : -3.40282e+38
Expected (operandRight): inf
Loc: [qtbase/tests/auto/testlib/selftests/float/tst_float.cpp(0)]
FAIL! : tst_float::floatComparisons(should FAIL: -inf != max) Compared floats are not the same (fuzzy compare)
Actual (operandLeft) : -inf
Expected (operandRight): 3.40282e+38
Loc: [qtbase/tests/auto/testlib/selftests/float/tst_float.cpp(0)]
FAIL! : tst_float::floatComparisons(should FAIL: -inf != -max) Compared floats are not the same (fuzzy compare)
Actual (operandLeft) : -inf
Expected (operandRight): -3.40282e+38
Loc: [qtbase/tests/auto/testlib/selftests/float/tst_float.cpp(0)]
FAIL! : tst_float::floatComparisons(should FAIL: max != -inf) Compared floats are not the same (fuzzy compare)
Actual (operandLeft) : 3.40282e+38
Expected (operandRight): -inf
Loc: [qtbase/tests/auto/testlib/selftests/float/tst_float.cpp(0)]
FAIL! : tst_float::floatComparisons(should FAIL: -max != -inf) Compared floats are not the same (fuzzy compare)
Actual (operandLeft) : -3.40282e+38
Expected (operandRight): -inf
generate_expected_output.py: update generated expected_* files In selftests.qrc, imposed alphabetic order (on stem of name, then on suffix, effectively treating . as sorting before any letter) while removing old tests and adding new tests and data. Updated all non-csv files and added many missing files. (Not clear on csv support status; the script seems to have dropped it after 5.6, but the test still uses it.) Left expected_crashes* alone (no new files added, no update to old) as I don't get results resembling those anticipated. Omitted printdatatagswithglobaltags, printdatatags due to dangling hspace on output lines, which upset sanity-bot. A change to the test cpp is needed to make it viable to skip that dangling hspace. Change-Id: Iab3fb626c44a91c249b2fb626c12c75ea0317098 Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
2016-07-29 11:18:24 +00:00
Loc: [qtbase/tests/auto/testlib/selftests/float/tst_float.cpp(0)]
Add qfloat16 support to QCOMPARE Change-Id: Ide06f215a888328308a06e7e48edd666f790a5f0 Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io> Reviewed-by: Lars Knoll <lars.knoll@qt.io>
2018-11-09 13:05:35 +00:00
FAIL! : tst_float::float16Comparisons(should FAIL 1) Compared qfloat16s are not the same (fuzzy compare)
Actual (operandLeft) : 1
Expected (operandRight): 3
Loc: [qtbase/tests/auto/testlib/selftests/float/tst_float.cpp(0)]
QtTestLib: handle float16 the same as double and float In QCOMPARE, handle NaNs and infinities the way tests want them handled, rather than by strict IEEE rules. In particular, if a test expects NaN, this lets it treat that just like any other expected value, despite NaN != NaN as float16 values. Likewise, format infinities and NaNs specially in toString() so that they're reported consistently. Enable the qfloat16 tests that depend on this QCOMPARE() behavior. Refise the testlib selftest's float test to test qfloat16 the same way it tests float and double (and format the test the same way). This is a follow-up to 37f617c405a. Change-Id: I433256a09b1657e6725d68d07c5f80d805bf586a Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
2018-11-21 13:36:08 +00:00
PASS : tst_float::float16Comparisons(should PASS 1)
Add qfloat16 support to QCOMPARE Change-Id: Ide06f215a888328308a06e7e48edd666f790a5f0 Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io> Reviewed-by: Lars Knoll <lars.knoll@qt.io>
2018-11-09 13:05:35 +00:00
FAIL! : tst_float::float16Comparisons(should FAIL 2) Compared qfloat16s are not the same (fuzzy compare)
Update float16 part of TestLib selftest In commit 9bad096c091b2c2106c2f325dfca74be111eee58 I gave qFuzzyIsNull(qfloat16) a more forgiving threshold, consistent with qFloatCompare(qfloat16, qfloat16)'s fractional threshold. The selftest failed to catch two of the tests failing, so fix one of them to use different values, and remove one. Updated test expection for txt and deleted for other formats, as they're skipped (in tst_selftests.cpp) for this test. Refined the generator script to know about this test only being tested for txt. Pick-to: 6.2 Change-Id: I109547cf92178bb9f5ff0b06e0b3bb40c881b41b Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
2021-07-28 11:30:03 +00:00
Actual (operandLeft) : 0.01
Expected (operandRight): 0.03
Add qfloat16 support to QCOMPARE Change-Id: Ide06f215a888328308a06e7e48edd666f790a5f0 Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io> Reviewed-by: Lars Knoll <lars.knoll@qt.io>
2018-11-09 13:05:35 +00:00
Loc: [qtbase/tests/auto/testlib/selftests/float/tst_float.cpp(0)]
QtTestLib: handle float16 the same as double and float In QCOMPARE, handle NaNs and infinities the way tests want them handled, rather than by strict IEEE rules. In particular, if a test expects NaN, this lets it treat that just like any other expected value, despite NaN != NaN as float16 values. Likewise, format infinities and NaNs specially in toString() so that they're reported consistently. Enable the qfloat16 tests that depend on this QCOMPARE() behavior. Refise the testlib selftest's float test to test qfloat16 the same way it tests float and double (and format the test the same way). This is a follow-up to 37f617c405a. Change-Id: I433256a09b1657e6725d68d07c5f80d805bf586a Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
2018-11-21 13:36:08 +00:00
PASS : tst_float::float16Comparisons(should PASS 2)
Add qfloat16 support to QCOMPARE Change-Id: Ide06f215a888328308a06e7e48edd666f790a5f0 Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io> Reviewed-by: Lars Knoll <lars.knoll@qt.io>
2018-11-09 13:05:35 +00:00
FAIL! : tst_float::float16Comparisons(should FAIL 3) Compared qfloat16s are not the same (fuzzy compare)
Actual (operandLeft) : 98
Expected (operandRight): 99
Loc: [qtbase/tests/auto/testlib/selftests/float/tst_float.cpp(0)]
QtTestLib: handle float16 the same as double and float In QCOMPARE, handle NaNs and infinities the way tests want them handled, rather than by strict IEEE rules. In particular, if a test expects NaN, this lets it treat that just like any other expected value, despite NaN != NaN as float16 values. Likewise, format infinities and NaNs specially in toString() so that they're reported consistently. Enable the qfloat16 tests that depend on this QCOMPARE() behavior. Refise the testlib selftest's float test to test qfloat16 the same way it tests float and double (and format the test the same way). This is a follow-up to 37f617c405a. Change-Id: I433256a09b1657e6725d68d07c5f80d805bf586a Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
2018-11-21 13:36:08 +00:00
PASS : tst_float::float16Comparisons(should PASS 3)
FAIL! : tst_float::float16Comparisons(should FAIL 4) Compared qfloat16s are not the same (fuzzy compare)
Update float16 part of TestLib selftest In commit 9bad096c091b2c2106c2f325dfca74be111eee58 I gave qFuzzyIsNull(qfloat16) a more forgiving threshold, consistent with qFloatCompare(qfloat16, qfloat16)'s fractional threshold. The selftest failed to catch two of the tests failing, so fix one of them to use different values, and remove one. Updated test expection for txt and deleted for other formats, as they're skipped (in tst_selftests.cpp) for this test. Refined the generator script to know about this test only being tested for txt. Pick-to: 6.2 Change-Id: I109547cf92178bb9f5ff0b06e0b3bb40c881b41b Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
2021-07-28 11:30:03 +00:00
Actual (operandLeft) : 0.01
Expected (operandRight): 0.0097
QtTestLib: handle float16 the same as double and float In QCOMPARE, handle NaNs and infinities the way tests want them handled, rather than by strict IEEE rules. In particular, if a test expects NaN, this lets it treat that just like any other expected value, despite NaN != NaN as float16 values. Likewise, format infinities and NaNs specially in toString() so that they're reported consistently. Enable the qfloat16 tests that depend on this QCOMPARE() behavior. Refise the testlib selftest's float test to test qfloat16 the same way it tests float and double (and format the test the same way). This is a follow-up to 37f617c405a. Change-Id: I433256a09b1657e6725d68d07c5f80d805bf586a Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
2018-11-21 13:36:08 +00:00
Loc: [qtbase/tests/auto/testlib/selftests/float/tst_float.cpp(0)]
PASS : tst_float::float16Comparisons(should PASS 4)
FAIL! : tst_float::float16Comparisons(should FAIL 5) Compared qfloat16s are not the same (fuzzy compare)
Actual (operandLeft) : 5.94e+04
Expected (operandRight): 5.88e+04
Loc: [qtbase/tests/auto/testlib/selftests/float/tst_float.cpp(0)]
PASS : tst_float::float16Comparisons(should PASS: NaN == NaN)
FAIL! : tst_float::float16Comparisons(should FAIL: NaN != 0) Compared qfloat16s are not the same (fuzzy compare)
Actual (operandLeft) : nan
Expected (operandRight): 0
Loc: [qtbase/tests/auto/testlib/selftests/float/tst_float.cpp(0)]
FAIL! : tst_float::float16Comparisons(should FAIL: 0 != NaN) Compared qfloat16s are not the same (fuzzy compare)
Actual (operandLeft) : 0
Expected (operandRight): nan
Loc: [qtbase/tests/auto/testlib/selftests/float/tst_float.cpp(0)]
FAIL! : tst_float::float16Comparisons(should FAIL: NaN != 1) Compared qfloat16s are not the same (fuzzy compare)
Actual (operandLeft) : nan
Expected (operandRight): 1
Loc: [qtbase/tests/auto/testlib/selftests/float/tst_float.cpp(0)]
FAIL! : tst_float::float16Comparisons(should FAIL: 1 != NaN) Compared qfloat16s are not the same (fuzzy compare)
Actual (operandLeft) : 1
Expected (operandRight): nan
Loc: [qtbase/tests/auto/testlib/selftests/float/tst_float.cpp(0)]
PASS : tst_float::float16Comparisons(should PASS: inf == inf)
PASS : tst_float::float16Comparisons(should PASS: -inf == -inf)
FAIL! : tst_float::float16Comparisons(should FAIL: inf != -inf) Compared qfloat16s are not the same (fuzzy compare)
Actual (operandLeft) : inf
Expected (operandRight): -inf
Loc: [qtbase/tests/auto/testlib/selftests/float/tst_float.cpp(0)]
FAIL! : tst_float::float16Comparisons(should FAIL: -inf != inf) Compared qfloat16s are not the same (fuzzy compare)
Actual (operandLeft) : -inf
Expected (operandRight): inf
Loc: [qtbase/tests/auto/testlib/selftests/float/tst_float.cpp(0)]
FAIL! : tst_float::float16Comparisons(should FAIL: inf != nan) Compared qfloat16s are not the same (fuzzy compare)
Actual (operandLeft) : inf
Expected (operandRight): nan
Loc: [qtbase/tests/auto/testlib/selftests/float/tst_float.cpp(0)]
FAIL! : tst_float::float16Comparisons(should FAIL: nan != inf) Compared qfloat16s are not the same (fuzzy compare)
Actual (operandLeft) : nan
Expected (operandRight): inf
Loc: [qtbase/tests/auto/testlib/selftests/float/tst_float.cpp(0)]
FAIL! : tst_float::float16Comparisons(should FAIL: -inf != nan) Compared qfloat16s are not the same (fuzzy compare)
Actual (operandLeft) : -inf
Expected (operandRight): nan
Loc: [qtbase/tests/auto/testlib/selftests/float/tst_float.cpp(0)]
FAIL! : tst_float::float16Comparisons(should FAIL: nan != -inf) Compared qfloat16s are not the same (fuzzy compare)
Actual (operandLeft) : nan
Expected (operandRight): -inf
Loc: [qtbase/tests/auto/testlib/selftests/float/tst_float.cpp(0)]
FAIL! : tst_float::float16Comparisons(should FAIL: inf != 0) Compared qfloat16s are not the same (fuzzy compare)
Actual (operandLeft) : inf
Expected (operandRight): 0
Loc: [qtbase/tests/auto/testlib/selftests/float/tst_float.cpp(0)]
FAIL! : tst_float::float16Comparisons(should FAIL: 0 != inf) Compared qfloat16s are not the same (fuzzy compare)
Actual (operandLeft) : 0
Expected (operandRight): inf
Loc: [qtbase/tests/auto/testlib/selftests/float/tst_float.cpp(0)]
FAIL! : tst_float::float16Comparisons(should FAIL: -inf != 0) Compared qfloat16s are not the same (fuzzy compare)
Actual (operandLeft) : -inf
Expected (operandRight): 0
Loc: [qtbase/tests/auto/testlib/selftests/float/tst_float.cpp(0)]
FAIL! : tst_float::float16Comparisons(should FAIL: 0 != -inf) Compared qfloat16s are not the same (fuzzy compare)
Actual (operandLeft) : 0
Expected (operandRight): -inf
Loc: [qtbase/tests/auto/testlib/selftests/float/tst_float.cpp(0)]
FAIL! : tst_float::float16Comparisons(should FAIL: inf != 1) Compared qfloat16s are not the same (fuzzy compare)
Actual (operandLeft) : inf
Expected (operandRight): 1
Loc: [qtbase/tests/auto/testlib/selftests/float/tst_float.cpp(0)]
FAIL! : tst_float::float16Comparisons(should FAIL: 1 != inf) Compared qfloat16s are not the same (fuzzy compare)
Actual (operandLeft) : 1
Expected (operandRight): inf
Loc: [qtbase/tests/auto/testlib/selftests/float/tst_float.cpp(0)]
FAIL! : tst_float::float16Comparisons(should FAIL: -inf != 1) Compared qfloat16s are not the same (fuzzy compare)
Actual (operandLeft) : -inf
Expected (operandRight): 1
Loc: [qtbase/tests/auto/testlib/selftests/float/tst_float.cpp(0)]
FAIL! : tst_float::float16Comparisons(should FAIL: 1 != -inf) Compared qfloat16s are not the same (fuzzy compare)
Actual (operandLeft) : 1
Expected (operandRight): -inf
Loc: [qtbase/tests/auto/testlib/selftests/float/tst_float.cpp(0)]
FAIL! : tst_float::float16Comparisons(should FAIL: inf != max) Compared qfloat16s are not the same (fuzzy compare)
Actual (operandLeft) : inf
Expected (operandRight): 6.55e+04
Loc: [qtbase/tests/auto/testlib/selftests/float/tst_float.cpp(0)]
FAIL! : tst_float::float16Comparisons(should FAIL: inf != -max) Compared qfloat16s are not the same (fuzzy compare)
Actual (operandLeft) : inf
Expected (operandRight): -6.55e+04
Loc: [qtbase/tests/auto/testlib/selftests/float/tst_float.cpp(0)]
FAIL! : tst_float::float16Comparisons(should FAIL: max != inf) Compared qfloat16s are not the same (fuzzy compare)
Actual (operandLeft) : 6.55e+04
Expected (operandRight): inf
Loc: [qtbase/tests/auto/testlib/selftests/float/tst_float.cpp(0)]
FAIL! : tst_float::float16Comparisons(should FAIL: -max != inf) Compared qfloat16s are not the same (fuzzy compare)
Actual (operandLeft) : -6.55e+04
Expected (operandRight): inf
Loc: [qtbase/tests/auto/testlib/selftests/float/tst_float.cpp(0)]
FAIL! : tst_float::float16Comparisons(should FAIL: -inf != max) Compared qfloat16s are not the same (fuzzy compare)
Actual (operandLeft) : -inf
Expected (operandRight): 6.55e+04
Loc: [qtbase/tests/auto/testlib/selftests/float/tst_float.cpp(0)]
FAIL! : tst_float::float16Comparisons(should FAIL: -inf != -max) Compared qfloat16s are not the same (fuzzy compare)
Actual (operandLeft) : -inf
Expected (operandRight): -6.55e+04
Loc: [qtbase/tests/auto/testlib/selftests/float/tst_float.cpp(0)]
FAIL! : tst_float::float16Comparisons(should FAIL: max != -inf) Compared qfloat16s are not the same (fuzzy compare)
Actual (operandLeft) : 6.55e+04
Expected (operandRight): -inf
Loc: [qtbase/tests/auto/testlib/selftests/float/tst_float.cpp(0)]
FAIL! : tst_float::float16Comparisons(should FAIL: -max != -inf) Compared qfloat16s are not the same (fuzzy compare)
Actual (operandLeft) : -6.55e+04
Expected (operandRight): -inf
Loc: [qtbase/tests/auto/testlib/selftests/float/tst_float.cpp(0)]
Split subtest selftest This test was attempting to verify two completely unrelated things, so this commit splits it into two tests. Also, printf calls are replaced by qDebug so that the test does not bypass the testlib loggers. Change-Id: I1a202af38ce2c69690a32d93405ba604ec6cabee Reviewed-on: http://codereview.qt-project.org/5178 Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
2011-09-20 01:56:31 +00:00
FAIL! : tst_float::compareFloatTests(1e0) Compared floats are not the same (fuzzy compare)
testlib: Improve formatting of QCOMPARE failure messages. Make the various versions of the failure message align consistently so that it's a little easier to compare the actual and expected values. Of course, the value won't align nicely unless the "actual" and "expected" strings are the same length, but at least this commit makes that consistent across all versions of the message. Change-Id: If9ce231df3b5d279a06f6458fdb5da0aa4586068 Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
2012-03-08 01:30:10 +00:00
Actual (t1): 1
Split subtest selftest This test was attempting to verify two completely unrelated things, so this commit splits it into two tests. Also, printf calls are replaced by qDebug so that the test does not bypass the testlib loggers. Change-Id: I1a202af38ce2c69690a32d93405ba604ec6cabee Reviewed-on: http://codereview.qt-project.org/5178 Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
2011-09-20 01:56:31 +00:00
Expected (t3): 3
generate_expected_output.py: update generated expected_* files In selftests.qrc, imposed alphabetic order (on stem of name, then on suffix, effectively treating . as sorting before any letter) while removing old tests and adding new tests and data. Updated all non-csv files and added many missing files. (Not clear on csv support status; the script seems to have dropped it after 5.6, but the test still uses it.) Left expected_crashes* alone (no new files added, no update to old) as I don't get results resembling those anticipated. Omitted printdatatagswithglobaltags, printdatatags due to dangling hspace on output lines, which upset sanity-bot. A change to the test cpp is needed to make it viable to skip that dangling hspace. Change-Id: Iab3fb626c44a91c249b2fb626c12c75ea0317098 Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
2016-07-29 11:18:24 +00:00
Loc: [qtbase/tests/auto/testlib/selftests/float/tst_float.cpp(0)]
QCOMPARE: treat values as equal if qFuzzyIsNull(each) We hope this shall avoid some flaky failures noticed in quick tests, e.g. tst_QQuickMenu::Material::subMenuPosition(cascading,flip) was recently seen failing with 3.88e-11 != 0. This required some revision to test data in the testlib selftest for floats; the resulting expected output differs in details but not in which tests pass or fail. QEMU, naturally, made life difficult, requiring special-case code in the test-driver. [ChangeLog][QtTestLib][QCOMPARE] QCOMPARE() now treats its values as equal when qFuzzyIsNull() is true for both of them. Change-Id: Icc6ad5164b609937eddbe39cc69120f0abf0f3b4 Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org> Reviewed-by: Mitch Curtis <mitch.curtis@qt.io>
2020-04-15 11:10:31 +00:00
FAIL! : tst_float::compareFloatTests(1e-5) Compared floats are not the same (fuzzy compare)
Actual (t1): 1e-05
Expected (t3): 3e-05
generate_expected_output.py: update generated expected_* files In selftests.qrc, imposed alphabetic order (on stem of name, then on suffix, effectively treating . as sorting before any letter) while removing old tests and adding new tests and data. Updated all non-csv files and added many missing files. (Not clear on csv support status; the script seems to have dropped it after 5.6, but the test still uses it.) Left expected_crashes* alone (no new files added, no update to old) as I don't get results resembling those anticipated. Omitted printdatatagswithglobaltags, printdatatags due to dangling hspace on output lines, which upset sanity-bot. A change to the test cpp is needed to make it viable to skip that dangling hspace. Change-Id: Iab3fb626c44a91c249b2fb626c12c75ea0317098 Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
2016-07-29 11:18:24 +00:00
Loc: [qtbase/tests/auto/testlib/selftests/float/tst_float.cpp(0)]
Split subtest selftest This test was attempting to verify two completely unrelated things, so this commit splits it into two tests. Also, printf calls are replaced by qDebug so that the test does not bypass the testlib loggers. Change-Id: I1a202af38ce2c69690a32d93405ba604ec6cabee Reviewed-on: http://codereview.qt-project.org/5178 Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
2011-09-20 01:56:31 +00:00
FAIL! : tst_float::compareFloatTests(1e+7) Compared floats are not the same (fuzzy compare)
testlib: Improve formatting of QCOMPARE failure messages. Make the various versions of the failure message align consistently so that it's a little easier to compare the actual and expected values. Of course, the value won't align nicely unless the "actual" and "expected" strings are the same length, but at least this commit makes that consistent across all versions of the message. Change-Id: If9ce231df3b5d279a06f6458fdb5da0aa4586068 Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
2012-03-08 01:30:10 +00:00
Actual (t1): 1e+07
Split subtest selftest This test was attempting to verify two completely unrelated things, so this commit splits it into two tests. Also, printf calls are replaced by qDebug so that the test does not bypass the testlib loggers. Change-Id: I1a202af38ce2c69690a32d93405ba604ec6cabee Reviewed-on: http://codereview.qt-project.org/5178 Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
2011-09-20 01:56:31 +00:00
Expected (t3): 3e+07
generate_expected_output.py: update generated expected_* files In selftests.qrc, imposed alphabetic order (on stem of name, then on suffix, effectively treating . as sorting before any letter) while removing old tests and adding new tests and data. Updated all non-csv files and added many missing files. (Not clear on csv support status; the script seems to have dropped it after 5.6, but the test still uses it.) Left expected_crashes* alone (no new files added, no update to old) as I don't get results resembling those anticipated. Omitted printdatatagswithglobaltags, printdatatags due to dangling hspace on output lines, which upset sanity-bot. A change to the test cpp is needed to make it viable to skip that dangling hspace. Change-Id: Iab3fb626c44a91c249b2fb626c12c75ea0317098 Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
2016-07-29 11:18:24 +00:00
Loc: [qtbase/tests/auto/testlib/selftests/float/tst_float.cpp(0)]
Split subtest selftest This test was attempting to verify two completely unrelated things, so this commit splits it into two tests. Also, printf calls are replaced by qDebug so that the test does not bypass the testlib loggers. Change-Id: I1a202af38ce2c69690a32d93405ba604ec6cabee Reviewed-on: http://codereview.qt-project.org/5178 Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
2011-09-20 01:56:31 +00:00
PASS : tst_float::cleanupTestCase()
QtTestLib: handle float16 the same as double and float In QCOMPARE, handle NaNs and infinities the way tests want them handled, rather than by strict IEEE rules. In particular, if a test expects NaN, this lets it treat that just like any other expected value, despite NaN != NaN as float16 values. Likewise, format infinities and NaNs specially in toString() so that they're reported consistently. Enable the qfloat16 tests that depend on this QCOMPARE() behavior. Refise the testlib selftest's float test to test qfloat16 the same way it tests float and double (and format the test the same way). This is a follow-up to 37f617c405a. Change-Id: I433256a09b1657e6725d68d07c5f80d805bf586a Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
2018-11-21 13:36:08 +00:00
Totals: 23 passed, 96 failed, 0 skipped, 0 blacklisted, 0ms
Split subtest selftest This test was attempting to verify two completely unrelated things, so this commit splits it into two tests. Also, printf calls are replaced by qDebug so that the test does not bypass the testlib loggers. Change-Id: I1a202af38ce2c69690a32d93405ba604ec6cabee Reviewed-on: http://codereview.qt-project.org/5178 Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
2011-09-20 01:56:31 +00:00
********* Finished testing of tst_float *********
Reference in New Issue Copy Permalink