qt5base-lts/bin/createpackage.pl

440 lines
16 KiB
Perl
Raw Normal View History

#!/usr/bin/perl
#############################################################################
##
## Copyright (C) 2011 Nokia Corporation and/or its subsidiary(-ies).
## All rights reserved.
## Contact: Nokia Corporation (qt-info@nokia.com)
##
## This file is part of the S60 port of the Qt Toolkit.
##
## $QT_BEGIN_LICENSE:LGPL$
## GNU Lesser General Public License Usage
## This file may be used under the terms of the GNU Lesser General Public
## License version 2.1 as published by the Free Software Foundation and
## appearing in the file LICENSE.LGPL included in the packaging of this
## file. Please review the following information to ensure the GNU Lesser
## General Public License version 2.1 requirements will be met:
## http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
##
## In addition, as a special exception, Nokia gives you certain additional
## rights. These rights are described in the Nokia Qt LGPL Exception
## version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
##
## GNU General Public License Usage
## Alternatively, this file may be used under the terms of the GNU General
## Public License version 3.0 as published by the Free Software Foundation
## and appearing in the file LICENSE.GPL included in the packaging of this
## file. Please review the following information to ensure the GNU General
## Public License version 3.0 requirements will be met:
## http://www.gnu.org/copyleft/gpl.html.
##
## Other Usage
## Alternatively, this file may be used in accordance with the terms and
## conditions contained in a signed written agreement between you and Nokia.
##
##
##
##
##
## $QT_END_LICENSE$
##
#############################################################################
############################################################################################
#
# Convenience script for creating signed packages you can install on your phone.
#
############################################################################################
use strict;
# use a command-line parsing module
use Getopt::Long;
# Use file name parsing module
use File::Basename;
# Use File::Spec services mainly rel2abs
use File::Spec;
# Use File::Path - to make stub sis target directory
use File::Path;
# use CWD abs_bath, which is exported only on request
use Cwd 'abs_path';
use File::Copy;
sub Usage() {
print <<ENDUSAGESTRING;
==============================================================================================
Convenience script for creating signed packages you can install on your phone.
Usage: createpackage.pl [options] templatepkg [target]-[platform] [certificate key [passphrase]]
Where supported options are as follows:
[-i|install] = Install the package right away using PC suite.
[-p|preprocess] = Only preprocess the template .pkg file.
[-c|certfile <file>] = The file containing certificate information for signing.
The file can have several certificates, each specified in
separate line. The certificate, key and passphrase in line
must be ';' separated. Lines starting with '#' are treated
as a comments. Also empty lines are ignored. The paths in
<file> can be absolute or relative to <file>.
[-u|unsigned] = Preserves the unsigned package.
[-o|only-unsigned] = Creates only unsigned package.
[-s|stub] = Generates stub sis for ROM.
[-n|sisname <name>] = Specifies the final sis name.
[-g|gcce-is-armv5] = Convert gcce platform to armv5.
[-d|dont-patch] = Skip automatic patching of capabilities and pkg file if default certificate
is used. Instead non-self-signable capabilities just cause warnings.
[-t|tmp-dir <path>] = Specifies temporary directory to be used for package creation.
Defaults to 'createpackage_tmp' under same directory as templatepkg.
Where parameters are as follows:
templatepkg = Name of .pkg file template
target = Either debug or release
platform = One of the supported platform
winscw | gcce | armv5 | armv6 | armv7
Note that when packaging binaries built using gcce and symbian-sbsv2
mkspec, armv5 must be used for platform instead of gcce.
certificate = The certificate file used for signing
key = The certificate's private key file
passphrase = The passphrase of the certificate's private key file
Example:
createpackage.pl fluidlauncher_template.pkg release-armv5
Example with certfile:
createpackage.pl -c=mycerts.txt fluidlauncher_template.pkg release-armv5
Content of 'mycerts.txt' must be something like this:
# This is comment line, also the empty lines are ignored
rd.cer;rd-key.pem
.\\cert\\mycert.cer;.\\cert\\mykey.key;yourpassword
X:\\QtS60\\s60installs\\selfsigned.cer;X:\\QtS60\\s60installs\\selfsigned.key
If no certificate and key files are provided, either a RnD certificate or
a self-signed certificate from QtDir\\src\\s60installs directory is used.
In the latter case the resulting package will also be automatically patched
using patch_capabilities.pl script, which makes it unsuitable for distribution.
Always specify certificates explicitly if you wish to distribute your package.
==============================================================================================
ENDUSAGESTRING
exit();
}
# Read given options
my $install = "";
my $preprocessonly = "";
my $certfile = "";
my $preserveUnsigned = "";
my $stub = "";
my $signed_sis_name = "";
my $onlyUnsigned = "";
my $convertGcce = "";
my $dontPatchCaps = "";
my $tempPackageDir = "";
unless (GetOptions('i|install' => \$install,
'p|preprocess' => \$preprocessonly,
'c|certfile=s' => \$certfile,
'u|unsigned' => \$preserveUnsigned,
'o|only-unsigned' => \$onlyUnsigned,
's|stub' => \$stub,
'n|sisname=s' => \$signed_sis_name,
'g|gcce-is-armv5' => \$convertGcce,
'd|dont-patch' => \$dontPatchCaps,
't|tmp-dir=s' => \$tempPackageDir,)) {
Usage();
}
my $epocroot = $ENV{EPOCROOT};
my $epocToolsDir = "";
if ($epocroot ne "") {
$epocroot =~ s,\\,/,g;
if ($epocroot =~ m,[^/]$,) {
$epocroot = $epocroot."/";
}
$epocToolsDir = "${epocroot}epoc32/tools/";
}
my $certfilepath = abs_path(dirname($certfile));
# Read params to variables
my $templatepkg = $ARGV[0];
my $targetplatform = lc $ARGV[1];
if ($targetplatform eq "") {
$targetplatform = "-";
}
my @tmpvalues = split('-', $targetplatform);
my $target;
$target = $tmpvalues[0] or $target = "";
my $platform;
$platform = $tmpvalues[1] or $platform = "";
if ($platform =~ m/^gcce$/i) {
if (($convertGcce ne "")) {
$platform = "armv5";
} elsif ($ENV{SBS_HOME}) {
# Print a informative note in case suspected misuse is detected.
print "\nNote: You should use armv5 as platform or specify -g parameter to convert platform\n";
print " when packaging gcce binaries built using symbian-sbsv2 mkspec.\n\n";
}
}
# Convert visual target to real target (debug->udeb and release->urel)
$target =~ s/debug/udeb/i;
$target =~ s/release/urel/i;
my $certificate;
$certificate = $ARGV[2] or $certificate = "";
my $key;
$key = $ARGV[3] or $key = "";
my $passphrase;
$passphrase = $ARGV[4] or $passphrase = "";
if ($tempPackageDir eq "") {
my ($templateVolume, $templatePath, $templateFileName) = File::Spec->splitpath($templatepkg);
$tempPackageDir = File::Spec->catpath($templateVolume, $templatePath."createpackage_tmp", "");
}
mkpath($tempPackageDir);
# Generate output pkg basename (i.e. file name without extension)
my $pkgoutputbasename = $templatepkg;
$pkgoutputbasename =~ s/_template/_$targetplatform/g;
$pkgoutputbasename =~ s/_installer\.pkg/_installer___temp\.pkg/g;
$pkgoutputbasename =~ s/\.pkg//g;
# Store output file names to variables
my ($dummy1, $dummy2, $pkgoutput) = File::Spec->splitpath($pkgoutputbasename.".pkg");
$pkgoutput = $tempPackageDir."/".$pkgoutput;
my $sisoutputbasename;
if ($signed_sis_name eq "") {
$sisoutputbasename = $pkgoutputbasename;
$sisoutputbasename =~ s/_$targetplatform//g;
$sisoutputbasename =~ s/_installer___temp/_installer/g;
$signed_sis_name = $sisoutputbasename.".sis";
} else {
$sisoutputbasename = $signed_sis_name;
if ($sisoutputbasename =~ m/(\.sis$|\.sisx$)/i) {
$sisoutputbasename =~ s/$1//i;
} else {
$signed_sis_name = $signed_sis_name.".sis";
}
}
my $installer_unsigned_app_sis_name = "";
my $installer_app_sis_name = "";
if ($templatepkg =~ m/_installer\.pkg$/i && $onlyUnsigned) {
$installer_unsigned_app_sis_name = $templatepkg;
$installer_unsigned_app_sis_name =~ s/_installer.pkg$/_unsigned.sis/i;
$installer_app_sis_name = $installer_unsigned_app_sis_name;
$installer_app_sis_name =~ s/_unsigned.sis$/.sis/;
}
my $unsigned_sis_name = $sisoutputbasename."_unsigned.sis";
my $stub_sis_name = $sisoutputbasename.".sis";
my $certtext = $certificate;
# Check some pre-conditions and print error messages if needed.
unless (length($templatepkg)) {
print "\nERROR: Template PKG filename is not defined!\n";
Usage();
}
# Check template exist
stat($templatepkg);
unless( -e _ ) {
print "\nERROR: Package description file '$templatepkg' does not exist!\n";
Usage();
}
# Check certifcate preconditions and set default certificate variables if needed
if (length($certificate)) {
unless(length($key)) {
print "\nERROR: Custom certificate key file parameter missing.!\n";
Usage();
}
} else {
#If no certificate is given, check default options
my $scriptpath = dirname(__FILE__);
my $certpath = File::Spec->catdir($scriptpath, File::Spec->updir(), "src/s60installs");
unless (-e $certpath) {
my $qmakeCmd = File::Spec->catfile($scriptpath, "qmake");
$certpath = `$qmakeCmd -query QT_INSTALL_PREFIX`;
$certpath =~ s/\s+$//;
$certpath = File::Spec->catdir($certpath, "src/s60installs");
}
$certtext = "RnD";
$certificate = File::Spec->catfile($certpath, "rd.cer");
$key = File::Spec->catfile($certpath, "rd-key.pem");
stat($certificate);
unless( -e _ ) {
$certtext = "Self Signed";
$certificate = File::Spec->catfile($certpath, "selfsigned.cer");
$key = File::Spec->catfile($certpath, "selfsigned.key");
}
}
# Read the certificates from file to two dimensional array
my @certificates;
if (length($certfile)) {
open CERTFILE, "<$certfile" or die $!;
while(<CERTFILE>){
s/#.*//; # ignore comments by erasing them
next if /^(\s)*$/; # skip blank lines
chomp; # remove trailing newline characters
my @certinfo = split(';', $_); # split row to certinfo
# Trim spaces
for(@certinfo) {
s/^\s+//;
s/\s+$//;
}
# Do some validation
unless(scalar(@certinfo) >= 2 && scalar(@certinfo) <= 3 && length($certinfo[0]) && length($certinfo[1]) ) {
print "\nERROR: $certfile line '$_' does not contain valid information!\n";
Usage();
}
push @certificates, [@certinfo]; # push data to two dimensional array
}
}
# Remove any existing .sis packages
unlink $unsigned_sis_name;
if (!$onlyUnsigned) {
unlink $signed_sis_name;
}
unlink $pkgoutput;
# Preprocess PKG
local $/;
# read template file
open( TEMPLATE, $templatepkg) or die "ERROR: '$templatepkg': $!";
$_=<TEMPLATE>;
close (TEMPLATE);
# If the pkg file does not contain macros, there is no need for platform or target.
if (m/\$\(PLATFORM\)/) {
unless (length($platform) && length($target)) {
print "\nERROR: Platform or target is not defined!\n";
Usage();
}
}
# replace the PKG variables
s/\$\(PLATFORM\)/$platform/gm;
s/\$\(TARGET\)/$target/gm;
if ($installer_unsigned_app_sis_name ne "") {
s/$installer_app_sis_name\"/$installer_unsigned_app_sis_name\"/;
}
#write the output
open( OUTPUT, ">$pkgoutput" ) or die "ERROR: '$pkgoutput' $!";
print OUTPUT $_;
close OUTPUT;
if ($preprocessonly) {
# Copy preprocessed file from tmp dir to pkg file dir
my ($templateVolume, $templatePath, $templateFileName) = File::Spec->splitpath($templatepkg);
my ($dummy1, $dummy2, $copyFileName) = File::Spec->splitpath($pkgoutput);
my $copyTarget = File::Spec->catpath($templateVolume, $templatePath, $copyFileName);
copy($pkgoutput, $copyTarget) or die "Preprocessed pkg file '$pkgoutput' cannot be copied.";
exit;
}
if($stub) {
if(!($epocroot)) { die("ERROR: EPOCROOT must be set to create stub sis files"); }
my $systeminstall = "${epocroot}epoc32/data/z/system/install";
mkpath($systeminstall);
my $stub_sis_name = $systeminstall."/".$stub_sis_name;
# Create stub SIS.
system ("${epocToolsDir}makesis -s $pkgoutput $stub_sis_name");
} else {
if ($certtext eq "Self Signed"
&& !@certificates
&& $templatepkg !~ m/_installer\.pkg$/i
&& !$onlyUnsigned) {
my $patch_capabilities = File::Spec->catfile(dirname($0), "patch_capabilities");
if ($dontPatchCaps) {
system ("$patch_capabilities -c $pkgoutput") and print ("Warning: Package check for self-signing viability failed. Installing the package on a device will most likely fail!\n\n");
} else {
print("Auto-patching self-signed package.\n");
system ("$patch_capabilities -t $tempPackageDir $pkgoutput") and die ("ERROR: Automatic patching failed");
}
}
# Create SIS.
# The 'and' is because system uses 0 to indicate success.
system ("${epocToolsDir}makesis $pkgoutput $unsigned_sis_name") and die ("ERROR: makesis failed");
print("\n");
my $targetInsert = "";
if ($targetplatform ne "-") {
$targetInsert = " for $targetplatform";
}
if ($onlyUnsigned) {
stat($unsigned_sis_name);
if( -e _ ) {
print ("Successfully created unsigned package ${unsigned_sis_name}${targetInsert}!\n");
} else {
print ("\nUnsigned package creation failed!\n");
}
print ("\n");
exit;
}
# Sign SIS with certificate info given as an argument.
my $relcert = File::Spec->abs2rel($certificate);
my $relkey = File::Spec->abs2rel($key);
# The 'and' is because system uses 0 to indicate success.
system ("${epocToolsDir}signsis $unsigned_sis_name $signed_sis_name $relcert $relkey $passphrase") and die ("ERROR: signsis failed");
# Check if creating signed SIS Succeeded
stat($signed_sis_name);
if( -e _ ) {
print ("Successfully created signed package ${signed_sis_name}${targetInsert} using certificate: $certtext!\n");
# Sign with additional certificates & keys
for my $row ( @certificates ) {
# Get certificate absolute file names, relative paths are relative to certfilepath
my $relcert = File::Spec->abs2rel(File::Spec->rel2abs( $row->[0], $certfilepath));
my $relkey = File::Spec->abs2rel(File::Spec->rel2abs( $row->[1], $certfilepath));
system ("${epocToolsDir}signsis $signed_sis_name $signed_sis_name $relcert $relkey $row->[2]");
print ("\tAdditionally signed the SIS with certificate: $row->[0]!\n");
}
# remove temporary unsigned sis
if (!$preserveUnsigned) {
unlink $unsigned_sis_name;
}
# Install the sis if requested
if ($install) {
print ("\nInstalling $signed_sis_name...\n");
system ("$signed_sis_name");
}
} else {
# Lets leave the generated PKG for problem solving purposes
print ("\nSIS creation failed!\n");
}
print ("\n");
}
#end of file