AuroraMiddleware/qt5base-lts
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
e005e99005
qt5base-lts/mkspecs/features/qt_module_pris.prf

201 lines
8.2 KiB
Plaintext
Raw Normal View History

mark a bunch of features as internal Change-Id: I5ad28827ff317985414e859263af85ceec31207c Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
2012-12-11 21:08:15 +00:00
#
# W A R N I N G
# -------------
#
# This file is not part of the Qt API. It exists purely as an
# implementation detail. It may change from version to version
# without notice, or even be removed.
#
# We mean it.
#
qt_module_fwdpri.prf => qt_module_pris.prf move the regular pri file creation into the "sub-prf" and rename it accordingly. the original reason for the split was the deep magic in activeqt (and phonon), which is gone now. Change-Id: If40e941afc9293725630ed6bcf3e4ef18a692f66 Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
2013-01-28 20:07:14 +00:00
load(qt_build_paths)
fix non-git non-prefix shadow builds turns out we need forwarding .pris in this case: without them, QT_MODULE_INCLUDE_BASE points into the build dir, so we fail to find the pre-generated headers. an alternative would be writing primary module .pris which already take that into account, but that would just add even more arcane code paths. Task-number: QTBUG-51521 Change-Id: I59f2a0d3f2095c9dfa0a8d1cabfc007a30bd2d23 Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
2016-03-01 20:08:51 +00:00
force_independent|split_incpath: \
redo include path logic for pre-generated headers make the include dir in the source tree the "main" include path, as that's where the majority of the headers is. then selectively add the shadowed dirs. Change-Id: I03ad13cfcf77175c141b94d41b1221740d851faf Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
2013-06-07 14:23:25 +00:00
CONFIG += need_fwd_pri
rewrite handling of private modules instead of being magic attributes of the main modules, the privates are now proper modules of their own. this cleans up some code paths, is more mappable to other build tools, and enables private modules to depend on other private modules. note that the library path is needed even in the "empty" private modules, as in the framework case that's where headers are found. consequently, the modules need to be explicitly marked with the new "no_link" flag. this required some reorganization of qtAddModule(). Change-Id: I8e4f44a609f8d639cc01bcb658256870a627eb63 Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
2013-10-21 19:05:35 +00:00
mod_work_pfx = $$MODULE_QMAKE_OUTDIR/mkspecs/modules
redo include path logic for pre-generated headers make the include dir in the source tree the "main" include path, as that's where the majority of the headers is. then selectively add the shadowed dirs. Change-Id: I03ad13cfcf77175c141b94d41b1221740d851faf Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
2013-06-07 14:23:25 +00:00
need_fwd_pri: \
rewrite handling of private modules instead of being magic attributes of the main modules, the privates are now proper modules of their own. this cleans up some code paths, is more mappable to other build tools, and enables private modules to depend on other private modules. note that the library path is needed even in the "empty" private modules, as in the framework case that's where headers are found. consequently, the modules need to be explicitly marked with the new "no_link" flag. this required some reorganization of qtAddModule(). Change-Id: I8e4f44a609f8d639cc01bcb658256870a627eb63 Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
2013-10-21 19:05:35 +00:00
mod_inst_pfx = $$MODULE_QMAKE_OUTDIR/mkspecs/modules-inst
don't create forwarding module pris for non-prefix builds as everything is built inside the common build/install dir, there is no point in the fwd pri stuff. as a "side effect", this makes it more straight-forward to relocate non-prefix builds, which is the default on windows. Task-number: QTBUG-28827 Change-Id: I010246a9ad87cf74974dc168768b1a8625f73260 Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
2013-01-28 19:25:44 +00:00
else: \
rewrite handling of private modules instead of being magic attributes of the main modules, the privates are now proper modules of their own. this cleans up some code paths, is more mappable to other build tools, and enables private modules to depend on other private modules. note that the library path is needed even in the "empty" private modules, as in the framework case that's where headers are found. consequently, the modules need to be explicitly marked with the new "no_link" flag. this required some reorganization of qtAddModule(). Change-Id: I8e4f44a609f8d639cc01bcb658256870a627eb63 Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
2013-10-21 19:05:35 +00:00
mod_inst_pfx = $$mod_work_pfx
!internal_module {
MODULE_ID = $$MODULE
don't try to include non-existing private module .pri amends b8f79e7095d1. Change-Id: If4358634a66947d7644224466b239e470d15afda Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
2015-04-16 16:09:01 +00:00
mods_to_load = $$MODULE
!no_private_module {
MODULE_PRIVATE_PRI = $$mod_inst_pfx/qt_lib_$${MODULE}_private.pri
mods_to_load += $${MODULE}_private
}
rewrite handling of private modules instead of being magic attributes of the main modules, the privates are now proper modules of their own. this cleans up some code paths, is more mappable to other build tools, and enables private modules to depend on other private modules. note that the library path is needed even in the "empty" private modules, as in the framework case that's where headers are found. consequently, the modules need to be explicitly marked with the new "no_link" flag. this required some reorganization of qtAddModule(). Change-Id: I8e4f44a609f8d639cc01bcb658256870a627eb63 Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
2013-10-21 19:05:35 +00:00
} else {
MODULE_ID = $${MODULE}_private
mods_to_load = $${MODULE}_private
}
need_fwd_pri: \
pris_to_load = $$MODULE_ID
else: \
pris_to_load = $$mods_to_load
MODULE_PRI = $$mod_inst_pfx/qt_lib_$${MODULE_ID}.pri
MODULE_FWD_PRI = $$mod_work_pfx/qt_lib_$${MODULE_ID}.pri
qt_module_fwdpri.prf => qt_module_pris.prf move the regular pri file creation into the "sub-prf" and rename it accordingly. the original reason for the split was the deep magic in activeqt (and phonon), which is gone now. Change-Id: If40e941afc9293725630ed6bcf3e4ef18a692f66 Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
2013-01-28 20:07:14 +00:00
generate fwd-pris in qt_module_config, not in syncqt the forwarding pri is loaded even if it was still created by syncqt, so a top-level qmake -r will still catch it even in the future. Change-Id: I2e4b556cd06eb88be9ee378662a2e6e1bff67ad7 Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
2012-04-16 12:13:12 +00:00
!build_pass {
qt_module_fwdpri.prf => qt_module_pris.prf move the regular pri file creation into the "sub-prf" and rename it accordingly. the original reason for the split was the deep magic in activeqt (and phonon), which is gone now. Change-Id: If40e941afc9293725630ed6bcf3e4ef18a692f66 Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
2013-01-28 20:07:14 +00:00
# Create a module .pri file
install host libraries into -hostprefix ... and introduce -hostlibdir configure option for symmetry. the libraries built for the host have no business in the target prefix. in principle this code would even support dynamically linked host libraries, but that's currently unused. Task-number: QTBUG-30591 Change-Id: I8e600fa4911a020fb0e87fbf7ef2f35647c7c4d5 Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com> Reviewed-by: Ivan Romanov <drizt@land.ru>
2013-05-08 13:30:56 +00:00
host_build: \
module_libs = "\$\$QT_MODULE_HOST_LIB_BASE"
qt_module_fwdpri.prf => qt_module_pris.prf move the regular pri file creation into the "sub-prf" and rename it accordingly. the original reason for the split was the deep magic in activeqt (and phonon), which is gone now. Change-Id: If40e941afc9293725630ed6bcf3e4ef18a692f66 Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
2013-01-28 20:07:14 +00:00
else: \
install host libraries into -hostprefix ... and introduce -hostlibdir configure option for symmetry. the libraries built for the host have no business in the target prefix. in principle this code would even support dynamically linked host libraries, but that's currently unused. Task-number: QTBUG-30591 Change-Id: I8e600fa4911a020fb0e87fbf7ef2f35647c7c4d5 Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com> Reviewed-by: Ivan Romanov <drizt@land.ru>
2013-05-08 13:30:56 +00:00
module_libs = "\$\$QT_MODULE_LIB_BASE"
export private module's deps as run deps of the public module this is necessary for: - generating -rpath-link arguments when link_prl is not used. link_prl is enabled by default, so this has no effect on most projects. - deployment purposes, which is hypothetical as of now. Change-Id: I9e629f3eef93c4edf12efc016ecc27dbe2186d61 Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
2016-03-03 13:29:53 +00:00
# In addition to the library's private deps, the private module's deps
# are logically runtime deps of the public module.
runtime_deps = $$QT_PRIVATE $$QT_FOR_PRIVATE
!isEmpty(runtime_deps): \
module_rundep = "QT.$${MODULE_ID}.run_depends = $$replace(runtime_deps, -private$, _private)"
fix lack of rpath-link when using modules from final location if the libraries are in a non-standard location, but no rpath is used, rpath-link is needed. this is often the case for non-prefix builds (which have no forwarding pris any more). as we cannot store absolute paths in the final pris, we need to store the module names, and resolve them only at use time. Change-Id: I1538b5d531611c76a2d7058a3b2ff683bdcbe427 Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
2013-02-01 16:30:31 +00:00
else: \
module_rundep =
make module .pri files more flexible save the actual library/framework name and framework paths in the .pri file instead of computing them again at use time in qt.prf. qt_no_framework_direct_includes inherently requires a use-time decision, so this ugliness remains. Change-Id: I09b2775e7d8e1d52e3af0d663e1babde10ae4814 Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com> Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
2015-11-19 16:11:05 +00:00
module_build_type = v2
make headers-only modules work for framework builds Change-Id: I00125883335c5b8cc556b4e4c964e11c55aa989b Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com> Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
2015-04-27 16:20:04 +00:00
static: \
make module .pri files more flexible save the actual library/framework name and framework paths in the .pri file instead of computing them again at use time in qt.prf. qt_no_framework_direct_includes inherently requires a use-time decision, so this ugliness remains. Change-Id: I09b2775e7d8e1d52e3af0d663e1babde10ae4814 Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com> Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
2015-11-19 16:11:05 +00:00
module_build_type += staticlib
lib_bundle {
module_build_type += lib_bundle
MODULE_FRAMEWORKS = " \$\$QT_MODULE_LIB_BASE"
}
make requirement for -private suffix explicit, take 2 the previous attempt broke ActiveQt, as it actually has public modules without headers (they are provided by a common base module). so explicitly mark the internal modules as such instead of applying heuristics. Change-Id: I8d8a2ee66f02c3444da2036a497e7f382f089f62 Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
2013-07-04 16:20:44 +00:00
internal_module: \
module_build_type += internal_module
Fix linking of sources without LTCG to a static lib with LTCG Whenever a binary is created and linked against a static lib that was compiled with LTCG, the final linking step requires the compiler flags so that the pre-compiled data in the shared library can get properly compiled. This could happen for a static build of Qt with LTCG, but also happens frequently for Qt's own build when linking regular libraries and applications against QtBootstrap or QtPlatformSupport. The linking fails when the target is a shared library (example: QtWaylandClient linking against QtPlatformSupport). The .prl file actually contains the "ltcg" flag, so the best solution would actually be to process that flag there and add link_ltcg if any dependent .prl has "ltcg", but I couldn't find out how to do that. Change-Id: I4a75a14d1dcb8c2089a427285e25d5555df7d7d3 Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
2014-11-23 05:00:34 +00:00
ltcg: \
module_build_type += ltcg
make module .pri files more flexible save the actual library/framework name and framework paths in the .pri file instead of computing them again at use time in qt.prf. qt_no_framework_direct_includes inherently requires a use-time decision, so this ugliness remains. Change-Id: I09b2775e7d8e1d52e3af0d663e1babde10ae4814 Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com> Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
2015-11-19 16:11:05 +00:00
module_module =
!equals(TEMPLATE, aux) {
module_module = $$TARGET$$QT_LIBINFIX
!lib_bundle: module_module ~= s,^Qt,Qt$$QT_MAJOR_VERSION,
}
qt_module_fwdpri.prf => qt_module_pris.prf move the regular pri file creation into the "sub-prf" and rename it accordingly. the original reason for the split was the deep magic in activeqt (and phonon), which is gone now. Change-Id: If40e941afc9293725630ed6bcf3e4ef18a692f66 Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
2013-01-28 20:07:14 +00:00
!isEmpty(MODULE_CONFIG): \
rewrite handling of private modules instead of being magic attributes of the main modules, the privates are now proper modules of their own. this cleans up some code paths, is more mappable to other build tools, and enables private modules to depend on other private modules. note that the library path is needed even in the "empty" private modules, as in the framework case that's where headers are found. consequently, the modules need to be explicitly marked with the new "no_link" flag. this required some reorganization of qtAddModule(). Change-Id: I8e4f44a609f8d639cc01bcb658256870a627eb63 Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
2013-10-21 19:05:35 +00:00
module_config = "QT.$${MODULE_ID}.CONFIG = $$MODULE_CONFIG"
qt_module_fwdpri.prf => qt_module_pris.prf move the regular pri file creation into the "sub-prf" and rename it accordingly. the original reason for the split was the deep magic in activeqt (and phonon), which is gone now. Change-Id: If40e941afc9293725630ed6bcf3e4ef18a692f66 Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
2013-01-28 20:07:14 +00:00
else: \
module_config =
automatically link plugins belonging to qt modules when building static apps the plugins already declare which modules they belong to. additionally, we allow plugins to declare which modules they "extend" - e.g., while the Quick accessibility plugin belongs to Gui's 'accessiblity' type, it makes no sense to link it unless Quick is actually linked. finally, it is possible to manually override the plugins which are linked for a particular type, by setting QTPLUGIN.<type> (to '-' if no plugins of this type should be linked at all). Task-number: QTBUG-35195 Change-Id: I8273d167a046eb3f3c1c584dc6e3798212a2fa31 Reviewed-by: Fawzi Mohamed <fawzi.mohamed@digia.com> Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com> Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
2014-04-02 20:17:40 +00:00
!isEmpty(MODULE_PLUGIN_TYPES): \
module_plugtypes = "QT.$${MODULE_ID}.plugin_types = $$replace(MODULE_PLUGIN_TYPES, /.*$, )"
else: \
module_plugtypes =
add support for explicitly declaring the module master header when a module delegates to another module (as the activeqt ones do), it doesn't have a master header to be included. we could derive the real master header by doing a transitive dependency resolution and some filtering, but that seems unnecessarily complex. Task-number: QTBUG-41892 Change-Id: Ie7ce51a837ac06e929b204ec734206c11b3ae241 Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com> Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
2014-10-13 12:47:13 +00:00
!isEmpty(MODULE_MASTER_HEADER): \
module_master = "QT.$${MODULE_ID}.master_header = $$MODULE_MASTER_HEADER"
else: \
module_master =
qt_module_fwdpri.prf => qt_module_pris.prf move the regular pri file creation into the "sub-prf" and rename it accordingly. the original reason for the split was the deep magic in activeqt (and phonon), which is gone now. Change-Id: If40e941afc9293725630ed6bcf3e4ef18a692f66 Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
2013-01-28 20:07:14 +00:00
MODULE_PRI_CONT = \
rewrite handling of private modules instead of being magic attributes of the main modules, the privates are now proper modules of their own. this cleans up some code paths, is more mappable to other build tools, and enables private modules to depend on other private modules. note that the library path is needed even in the "empty" private modules, as in the framework case that's where headers are found. consequently, the modules need to be explicitly marked with the new "no_link" flag. this required some reorganization of qtAddModule(). Change-Id: I8e4f44a609f8d639cc01bcb658256870a627eb63 Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
2013-10-21 19:05:35 +00:00
"QT.$${MODULE_ID}.VERSION = $${VERSION}" \
"QT.$${MODULE_ID}.MAJOR_VERSION = $$section(VERSION, ., 0, 0)" \
"QT.$${MODULE_ID}.MINOR_VERSION = $$section(VERSION, ., 1, 1)" \
"QT.$${MODULE_ID}.PATCH_VERSION = $$section(VERSION, ., 2, 2)" \
qt_module_fwdpri.prf => qt_module_pris.prf move the regular pri file creation into the "sub-prf" and rename it accordingly. the original reason for the split was the deep magic in activeqt (and phonon), which is gone now. Change-Id: If40e941afc9293725630ed6bcf3e4ef18a692f66 Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
2013-01-28 20:07:14 +00:00
"" \
rewrite handling of private modules instead of being magic attributes of the main modules, the privates are now proper modules of their own. this cleans up some code paths, is more mappable to other build tools, and enables private modules to depend on other private modules. note that the library path is needed even in the "empty" private modules, as in the framework case that's where headers are found. consequently, the modules need to be explicitly marked with the new "no_link" flag. this required some reorganization of qtAddModule(). Change-Id: I8e4f44a609f8d639cc01bcb658256870a627eb63 Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
2013-10-21 19:05:35 +00:00
"QT.$${MODULE_ID}.name = $$TARGET" \
make module .pri files more flexible save the actual library/framework name and framework paths in the .pri file instead of computing them again at use time in qt.prf. qt_no_framework_direct_includes inherently requires a use-time decision, so this ugliness remains. Change-Id: I09b2775e7d8e1d52e3af0d663e1babde10ae4814 Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com> Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
2015-11-19 16:11:05 +00:00
"QT.$${MODULE_ID}.module = $$module_module" \
rewrite handling of private modules instead of being magic attributes of the main modules, the privates are now proper modules of their own. this cleans up some code paths, is more mappable to other build tools, and enables private modules to depend on other private modules. note that the library path is needed even in the "empty" private modules, as in the framework case that's where headers are found. consequently, the modules need to be explicitly marked with the new "no_link" flag. this required some reorganization of qtAddModule(). Change-Id: I8e4f44a609f8d639cc01bcb658256870a627eb63 Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
2013-10-21 19:05:35 +00:00
"QT.$${MODULE_ID}.libs = $$module_libs" \
add support for explicitly declaring the module master header when a module delegates to another module (as the activeqt ones do), it doesn't have a master header to be included. we could derive the real master header by doing a transitive dependency resolution and some filtering, but that seems unnecessarily complex. Task-number: QTBUG-41892 Change-Id: Ie7ce51a837ac06e929b204ec734206c11b3ae241 Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com> Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
2014-10-13 12:47:13 +00:00
$$module_master \
make module .pri files more flexible save the actual library/framework name and framework paths in the .pri file instead of computing them again at use time in qt.prf. qt_no_framework_direct_includes inherently requires a use-time decision, so this ugliness remains. Change-Id: I09b2775e7d8e1d52e3af0d663e1babde10ae4814 Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com> Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
2015-11-19 16:11:05 +00:00
"QT.$${MODULE_ID}.includes = $$MODULE_INCLUDES" \
"QT.$${MODULE_ID}.frameworks =$$MODULE_FRAMEWORKS"
install host libraries into -hostprefix ... and introduce -hostlibdir configure option for symmetry. the libraries built for the host have no business in the target prefix. in principle this code would even support dynamically linked host libraries, but that's currently unused. Task-number: QTBUG-30591 Change-Id: I8e600fa4911a020fb0e87fbf7ef2f35647c7c4d5 Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com> Reviewed-by: Ivan Romanov <drizt@land.ru>
2013-05-08 13:30:56 +00:00
!host_build: MODULE_PRI_CONT += \
rewrite handling of private modules instead of being magic attributes of the main modules, the privates are now proper modules of their own. this cleans up some code paths, is more mappable to other build tools, and enables private modules to depend on other private modules. note that the library path is needed even in the "empty" private modules, as in the framework case that's where headers are found. consequently, the modules need to be explicitly marked with the new "no_link" flag. this required some reorganization of qtAddModule(). Change-Id: I8e4f44a609f8d639cc01bcb658256870a627eb63 Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
2013-10-21 19:05:35 +00:00
"QT.$${MODULE_ID}.bins = \$\$QT_MODULE_BIN_BASE" \
"QT.$${MODULE_ID}.libexecs = \$\$QT_MODULE_LIBEXEC_BASE" \
"QT.$${MODULE_ID}.plugins = \$\$QT_MODULE_PLUGIN_BASE" \
"QT.$${MODULE_ID}.imports = \$\$QT_MODULE_IMPORT_BASE" \
make better use of $$MODULE_PLUGIN_TYPES the module project files declare what plugins they need, as that is necessary for automatic android deployment. enable wider usage of this by making the information available from the module .pri files. caveat: the variable is called "types", but is in fact paths, so there can be particular plugins named. use this new facility to replace the egregious hard-coded list of plugin-to-module mappings from create_cmake. possible todo: automate populating DEPLOYMENT (for wince, and whatever else). Change-Id: Ibb9c07cfe2b0008905204cbeb81e9c8e2ae4dc69 Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
2013-10-23 10:40:05 +00:00
"QT.$${MODULE_ID}.qml = \$\$QT_MODULE_QML_BASE" \
automatically link plugins belonging to qt modules when building static apps the plugins already declare which modules they belong to. additionally, we allow plugins to declare which modules they "extend" - e.g., while the Quick accessibility plugin belongs to Gui's 'accessiblity' type, it makes no sense to link it unless Quick is actually linked. finally, it is possible to manually override the plugins which are linked for a particular type, by setting QTPLUGIN.<type> (to '-' if no plugins of this type should be linked at all). Task-number: QTBUG-35195 Change-Id: I8273d167a046eb3f3c1c584dc6e3798212a2fa31 Reviewed-by: Fawzi Mohamed <fawzi.mohamed@digia.com> Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com> Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
2014-04-02 20:17:40 +00:00
$$module_plugtypes
install host libraries into -hostprefix ... and introduce -hostlibdir configure option for symmetry. the libraries built for the host have no business in the target prefix. in principle this code would even support dynamically linked host libraries, but that's currently unused. Task-number: QTBUG-30591 Change-Id: I8e600fa4911a020fb0e87fbf7ef2f35647c7c4d5 Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com> Reviewed-by: Ivan Romanov <drizt@land.ru>
2013-05-08 13:30:56 +00:00
MODULE_PRI_CONT += \
rewrite handling of private modules instead of being magic attributes of the main modules, the privates are now proper modules of their own. this cleans up some code paths, is more mappable to other build tools, and enables private modules to depend on other private modules. note that the library path is needed even in the "empty" private modules, as in the framework case that's where headers are found. consequently, the modules need to be explicitly marked with the new "no_link" flag. this required some reorganization of qtAddModule(). Change-Id: I8e4f44a609f8d639cc01bcb658256870a627eb63 Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
2013-10-21 19:05:35 +00:00
"QT.$${MODULE_ID}.depends =$$join(MODULE_DEPENDS, " ", " ")" \
fix lack of rpath-link when using modules from final location if the libraries are in a non-standard location, but no rpath is used, rpath-link is needed. this is often the case for non-prefix builds (which have no forwarding pris any more). as we cannot store absolute paths in the final pris, we need to store the module names, and resolve them only at use time. Change-Id: I1538b5d531611c76a2d7058a3b2ff683bdcbe427 Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
2013-02-01 16:30:31 +00:00
$$module_rundep \
rewrite handling of private modules instead of being magic attributes of the main modules, the privates are now proper modules of their own. this cleans up some code paths, is more mappable to other build tools, and enables private modules to depend on other private modules. note that the library path is needed even in the "empty" private modules, as in the framework case that's where headers are found. consequently, the modules need to be explicitly marked with the new "no_link" flag. this required some reorganization of qtAddModule(). Change-Id: I8e4f44a609f8d639cc01bcb658256870a627eb63 Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
2013-10-21 19:05:35 +00:00
"QT.$${MODULE_ID}.module_config =$$join(module_build_type, " ", " ")" \
qt_module_fwdpri.prf => qt_module_pris.prf move the regular pri file creation into the "sub-prf" and rename it accordingly. the original reason for the split was the deep magic in activeqt (and phonon), which is gone now. Change-Id: If40e941afc9293725630ed6bcf3e4ef18a692f66 Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
2013-01-28 20:07:14 +00:00
$$module_config \
support spaces in build and install dirs spaces in the source dir are not supported for now, as that requires some more profound refactoring of the bootstrap makefiles. Change-Id: Ie0c07a1558b8326f642f2ea144bc1cd85ee761af Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
2014-11-27 13:12:40 +00:00
"QT.$${MODULE_ID}.DEFINES = $$val_escape(MODULE_DEFINES)" \
qt_module_fwdpri.prf => qt_module_pris.prf move the regular pri file creation into the "sub-prf" and rename it accordingly. the original reason for the split was the deep magic in activeqt (and phonon), which is gone now. Change-Id: If40e941afc9293725630ed6bcf3e4ef18a692f66 Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
2013-01-28 20:07:14 +00:00
"" \
enumerate modules in QT_MODULES, not QT_CONFIG QT_CONFIG is supposed to contain configure output, not a list of modules. for example, enumerating modules is not cleanly possible if modules are mixed with other flags. the conflation was merely historical, due to webkit and phonon doing it this way in the preliminary qt4 modularization. we now have a much cleaner way to query modules (qtHaveModule(<module>), or less recently, !isEmpty(QT.<module>.name)), which is already used throughout Qt. the old way was supposed to be removed for 5.0 already, but it slipped. better do it now, before people actually start using it. Change-Id: Iabdf0cdfaab9cd674f634f4c6ece105b2039c850 Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
2013-03-01 12:11:06 +00:00
"QT_MODULES += $$MODULE"
winrt: Add capabilities as specified by modules So far no capabilities (but internetClient for Windows 10) were added by default, which forced developers to always manually edit the WINRT_MANIFEST.capabilities(_device) property. This allowed to leave out non-required capabilities and keep the created manifest clean, examples being microphone for multimedia. However, this also breaks first user experience as deeper knowledge about this topic is required. Furthermore this is inconsistent with other platforms like Android, where all capabilities are set by default and developers need to edit the manifest manually in any case. With this change, modules can define the capability set to enable all features in the module. If developers want to disable some again, they need to adapt the generated manifest. From our experience this needs to be done in any case, latest at publishing stage when the store manipulates the manifest. Task-number: QTBUG-38802 Change-Id: I6d522268ee0afbfa00a30dbdd5e6ec9f415bebf3 Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
2016-03-17 09:29:43 +00:00
winrt: MODULE_PRI_CONT += \
"QT.$${MODULE_ID}.winrt_capabilities =$$join(MODULE_WINRT_CAPABILITIES, " ", " ")" \
"QT.$${MODULE_ID}.winrt_capabilities_device =$$join(MODULE_WINRT_CAPABILITIES_DEVICE, " ", " ")"
qt_module_fwdpri.prf => qt_module_pris.prf move the regular pri file creation into the "sub-prf" and rename it accordingly. the original reason for the split was the deep magic in activeqt (and phonon), which is gone now. Change-Id: If40e941afc9293725630ed6bcf3e4ef18a692f66 Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
2013-01-28 20:07:14 +00:00
write_file($$MODULE_PRI, MODULE_PRI_CONT)|error("Aborting.")
make it possible to suppress the creation of a private module while every "real" module has private headers, a very small headers-only module could reasonably have none. entirely hypothetically, of course. ;) Change-Id: Ib51a66858fb7d62f45fe2928625c25aa1ffc2827 Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com> Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
2015-03-16 12:05:46 +00:00
!internal_module:!no_private_module {
make module .pri files more flexible save the actual library/framework name and framework paths in the .pri file instead of computing them again at use time in qt.prf. qt_no_framework_direct_includes inherently requires a use-time decision, so this ugliness remains. Change-Id: I09b2775e7d8e1d52e3af0d663e1babde10ae4814 Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com> Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
2015-11-19 16:11:05 +00:00
module_build_type += internal_module
unbreak propagation of dependencies on private modules most module project files define two logical modules: a public one and the corresponding private one. these are really separate modules as far as qmake is concerned (even though the private one contains just headers), and consequently have separate dependencies - QT and QT_FOR_PRIVATE. as public modules cannot depend on private ones, all private dependencies would have to go to QT_FOR_PRIVATE, and a dependency on the respective public module would have to be added to QT. this would be a bit tedious, so we have a convenience feature which allows putting private dependencies into QT, but automatically "downgrades" them to their public counterpart when creating the public module's .pri file. however, we failed to put verbatim versions of these private dependencies into the private modules, which meant that these dependencies were not pulled in transitively by the private modules' users. note that this entirely unrelated to QT_PRIVATE - this one defines the private (non-propagated) dependencies of the module's implementation, i.e., the libraries (and headers) that are not part of the link interface. there is no QT_PRIVATE_FOR_PRIVATE, because there is obviously no point in assigning the dependencies to a particular logical submodule when neither one inherits them as far as the qt module system is concerned. Change-Id: Ib056b47dde3341ef9a52ffff13efaf8ef8e6817b Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com> Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
2016-01-08 17:45:21 +00:00
private_deps = $$QT
private_deps -= $$MODULE_DEPENDS
private_deps += $$MODULE $$QT_FOR_PRIVATE
private_deps ~= s,-private$,_private,g
rewrite handling of private modules instead of being magic attributes of the main modules, the privates are now proper modules of their own. this cleans up some code paths, is more mappable to other build tools, and enables private modules to depend on other private modules. note that the library path is needed even in the "empty" private modules, as in the framework case that's where headers are found. consequently, the modules need to be explicitly marked with the new "no_link" flag. this required some reorganization of qtAddModule(). Change-Id: I8e4f44a609f8d639cc01bcb658256870a627eb63 Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
2013-10-21 19:05:35 +00:00
MODULE_PRIVATE_PRI_CONT = \
"QT.$${MODULE}_private.VERSION = $${VERSION}" \
"QT.$${MODULE}_private.MAJOR_VERSION = $$section(VERSION, ., 0, 0)" \
"QT.$${MODULE}_private.MINOR_VERSION = $$section(VERSION, ., 1, 1)" \
"QT.$${MODULE}_private.PATCH_VERSION = $$section(VERSION, ., 2, 2)" \
"" \
"QT.$${MODULE}_private.name = $${TARGET}" \ # Same name as base module
make module .pri files more flexible save the actual library/framework name and framework paths in the .pri file instead of computing them again at use time in qt.prf. qt_no_framework_direct_includes inherently requires a use-time decision, so this ugliness remains. Change-Id: I09b2775e7d8e1d52e3af0d663e1babde10ae4814 Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com> Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
2015-11-19 16:11:05 +00:00
"QT.$${MODULE}_private.module =" \
rewrite handling of private modules instead of being magic attributes of the main modules, the privates are now proper modules of their own. this cleans up some code paths, is more mappable to other build tools, and enables private modules to depend on other private modules. note that the library path is needed even in the "empty" private modules, as in the framework case that's where headers are found. consequently, the modules need to be explicitly marked with the new "no_link" flag. this required some reorganization of qtAddModule(). Change-Id: I8e4f44a609f8d639cc01bcb658256870a627eb63 Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
2013-10-21 19:05:35 +00:00
"QT.$${MODULE}_private.libs = $$module_libs" \
"QT.$${MODULE}_private.includes = $$MODULE_PRIVATE_INCLUDES" \
make module .pri files more flexible save the actual library/framework name and framework paths in the .pri file instead of computing them again at use time in qt.prf. qt_no_framework_direct_includes inherently requires a use-time decision, so this ugliness remains. Change-Id: I09b2775e7d8e1d52e3af0d663e1babde10ae4814 Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com> Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
2015-11-19 16:11:05 +00:00
"QT.$${MODULE}_private.frameworks =" \
unbreak propagation of dependencies on private modules most module project files define two logical modules: a public one and the corresponding private one. these are really separate modules as far as qmake is concerned (even though the private one contains just headers), and consequently have separate dependencies - QT and QT_FOR_PRIVATE. as public modules cannot depend on private ones, all private dependencies would have to go to QT_FOR_PRIVATE, and a dependency on the respective public module would have to be added to QT. this would be a bit tedious, so we have a convenience feature which allows putting private dependencies into QT, but automatically "downgrades" them to their public counterpart when creating the public module's .pri file. however, we failed to put verbatim versions of these private dependencies into the private modules, which meant that these dependencies were not pulled in transitively by the private modules' users. note that this entirely unrelated to QT_PRIVATE - this one defines the private (non-propagated) dependencies of the module's implementation, i.e., the libraries (and headers) that are not part of the link interface. there is no QT_PRIVATE_FOR_PRIVATE, because there is obviously no point in assigning the dependencies to a particular logical submodule when neither one inherits them as far as the qt module system is concerned. Change-Id: Ib056b47dde3341ef9a52ffff13efaf8ef8e6817b Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com> Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
2016-01-08 17:45:21 +00:00
"QT.$${MODULE}_private.depends = $$private_deps" \
rewrite handling of private modules instead of being magic attributes of the main modules, the privates are now proper modules of their own. this cleans up some code paths, is more mappable to other build tools, and enables private modules to depend on other private modules. note that the library path is needed even in the "empty" private modules, as in the framework case that's where headers are found. consequently, the modules need to be explicitly marked with the new "no_link" flag. this required some reorganization of qtAddModule(). Change-Id: I8e4f44a609f8d639cc01bcb658256870a627eb63 Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
2013-10-21 19:05:35 +00:00
"QT.$${MODULE}_private.module_config =$$join(module_build_type, " ", " ")"
write_file($$MODULE_PRIVATE_PRI, MODULE_PRIVATE_PRI_CONT)|error("Aborting.")
}
MODULE_PRI_FILES = $$MODULE_PRI $$MODULE_PRIVATE_PRI
generate fwd-pris in qt_module_config, not in syncqt the forwarding pri is loaded even if it was still created by syncqt, so a top-level qmake -r will still catch it even in the future. Change-Id: I2e4b556cd06eb88be9ee378662a2e6e1bff67ad7 Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
2012-04-16 12:13:12 +00:00
redo include path logic for pre-generated headers make the include dir in the source tree the "main" include path, as that's where the majority of the headers is. then selectively add the shadowed dirs. Change-Id: I03ad13cfcf77175c141b94d41b1221740d851faf Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
2013-06-07 14:23:25 +00:00
need_fwd_pri {
rework include path construction in the module system the main objective was to fix the bootstrap modules in framework builds. bootstrapped modules which "borrow" headers from "proper" modules can specify this in a clean way now. a side effect of this is that the bootstrap-dbus module now has its own syncqt call. most includepath-related setup from qt_module_pris.prf was moved to qt_module_headers.prf. Change-Id: Ie0d8192cfac1a8cdae0ddd0bc0cd8c3092b1e85b Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com> Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
2015-11-18 16:19:46 +00:00
!git_build: \
redo include path logic for pre-generated headers make the include dir in the source tree the "main" include path, as that's where the majority of the headers is. then selectively add the shadowed dirs. Change-Id: I03ad13cfcf77175c141b94d41b1221740d851faf Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
2013-06-07 14:23:25 +00:00
MODULE_BASE_INCDIR = $$MODULE_BASE_INDIR
else: \
MODULE_BASE_INCDIR = $$MODULE_BASE_OUTDIR
generate fwd-pris in qt_module_config, not in syncqt the forwarding pri is loaded even if it was still created by syncqt, so a top-level qmake -r will still catch it even in the future. Change-Id: I2e4b556cd06eb88be9ee378662a2e6e1bff67ad7 Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
2012-04-16 12:13:12 +00:00
don't create forwarding module pris for non-prefix builds as everything is built inside the common build/install dir, there is no point in the fwd pri stuff. as a "side effect", this makes it more straight-forward to relocate non-prefix builds, which is the default on windows. Task-number: QTBUG-28827 Change-Id: I010246a9ad87cf74974dc168768b1a8625f73260 Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
2013-01-28 19:25:44 +00:00
# Create a forwarding module .pri file
MODULE_FWD_PRI_CONT = \
support spaces in build and install dirs spaces in the source dir are not supported for now, as that requires some more profound refactoring of the bootstrap makefiles. Change-Id: Ie0c07a1558b8326f642f2ea144bc1cd85ee761af Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
2014-11-27 13:12:40 +00:00
"QT_MODULE_BIN_BASE = $$val_escape(MODULE_BASE_OUTDIR)/bin" \
"QT_MODULE_INCLUDE_BASE = $$val_escape(MODULE_BASE_INCDIR)/include" \
"QT_MODULE_IMPORT_BASE = $$val_escape(MODULE_BASE_OUTDIR)/imports" \
"QT_MODULE_QML_BASE = $$val_escape(MODULE_BASE_OUTDIR)/qml" \
"QT_MODULE_LIB_BASE = $$val_escape(MODULE_BASE_OUTDIR)/lib" \
"QT_MODULE_HOST_LIB_BASE = $$val_escape(MODULE_BASE_OUTDIR)/lib" \
"QT_MODULE_LIBEXEC_BASE = $$val_escape(MODULE_BASE_OUTDIR)/libexec" \
"QT_MODULE_PLUGIN_BASE = $$val_escape(MODULE_BASE_OUTDIR)/plugins" \
"include($$val_escape(MODULE_PRI))" \
make module-by-module build work when old builds are installed when doing a module-by-module build, we need to also use includes and libraries from the install tree, as it contains the current module's dependencies. but a pre-existing installation of the current module must not be found first, as it would cause trouble latest when it was somehow incompatible. but purely topological sorting of the dependencies could cause the locations to be mixed up. therefore we give modules which are part of the current build a priority boost. Change-Id: I8fdbb46f0a2a630781c8a2177468039c1122151a Reviewed-by: Giulio Camuffo <giulio.camuffo@jollamobile.com> Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
2014-07-25 17:44:50 +00:00
"QT.$${MODULE_ID}.priority = 1"
make it possible to suppress the creation of a private module while every "real" module has private headers, a very small headers-only module could reasonably have none. entirely hypothetically, of course. ;) Change-Id: Ib51a66858fb7d62f45fe2928625c25aa1ffc2827 Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com> Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
2015-03-16 12:05:46 +00:00
!internal_module:!no_private_module: MODULE_FWD_PRI_CONT += \
support spaces in build and install dirs spaces in the source dir are not supported for now, as that requires some more profound refactoring of the bootstrap makefiles. Change-Id: Ie0c07a1558b8326f642f2ea144bc1cd85ee761af Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
2014-11-27 13:12:40 +00:00
"include($$val_escape(MODULE_PRIVATE_PRI))" \
make module-by-module build work when old builds are installed when doing a module-by-module build, we need to also use includes and libraries from the install tree, as it contains the current module's dependencies. but a pre-existing installation of the current module must not be found first, as it would cause trouble latest when it was somehow incompatible. but purely topological sorting of the dependencies could cause the locations to be mixed up. therefore we give modules which are part of the current build a priority boost. Change-Id: I8fdbb46f0a2a630781c8a2177468039c1122151a Reviewed-by: Giulio Camuffo <giulio.camuffo@jollamobile.com> Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
2014-07-25 17:44:50 +00:00
"QT.$${MODULE}_private.priority = 1"
rework include path construction in the module system the main objective was to fix the bootstrap modules in framework builds. bootstrapped modules which "borrow" headers from "proper" modules can specify this in a clean way now. a side effect of this is that the bootstrap-dbus module now has its own syncqt call. most includepath-related setup from qt_module_pris.prf was moved to qt_module_headers.prf. Change-Id: Ie0d8192cfac1a8cdae0ddd0bc0cd8c3092b1e85b Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com> Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
2015-11-18 16:19:46 +00:00
!isEmpty(MODULE_FWD_INCLUDES) {
!lib_bundle: \
pls = +
MODULE_FWD_PRI_CONT += \
"QT.$${MODULE_ID}.includes $$pls= $$MODULE_FWD_INCLUDES"
!internal_module: \
MODULE_FWD_PRI_CONT += \
"QT.$${MODULE}_private.includes $$pls= $$MODULE_FWD_PRIVATE_INCLUDES"
}
don't create forwarding module pris for non-prefix builds as everything is built inside the common build/install dir, there is no point in the fwd pri stuff. as a "side effect", this makes it more straight-forward to relocate non-prefix builds, which is the default on windows. Task-number: QTBUG-28827 Change-Id: I010246a9ad87cf74974dc168768b1a8625f73260 Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
2013-01-28 19:25:44 +00:00
write_file($$MODULE_FWD_PRI, MODULE_FWD_PRI_CONT)|error("Aborting.")
touch($$MODULE_FWD_PRI, $$MODULE_PRI)
MODULE_PRI_FILES += $$MODULE_FWD_PRI
redo include path logic for pre-generated headers make the include dir in the source tree the "main" include path, as that's where the majority of the headers is. then selectively add the shadowed dirs. Change-Id: I03ad13cfcf77175c141b94d41b1221740d851faf Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
2013-06-07 14:23:25 +00:00
} else {
don't create forwarding module pris for non-prefix builds as everything is built inside the common build/install dir, there is no point in the fwd pri stuff. as a "side effect", this makes it more straight-forward to relocate non-prefix builds, which is the default on windows. Task-number: QTBUG-28827 Change-Id: I010246a9ad87cf74974dc168768b1a8625f73260 Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
2013-01-28 19:25:44 +00:00
update some comments relating to forwarding module pri files Change-Id: I3486f949fee2ac977e3cde669188790e5f4b3167 Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
2013-06-07 12:06:24 +00:00
# This is needed for the direct include() below. Mirrors qt_config.prf
don't create forwarding module pris for non-prefix builds as everything is built inside the common build/install dir, there is no point in the fwd pri stuff. as a "side effect", this makes it more straight-forward to relocate non-prefix builds, which is the default on windows. Task-number: QTBUG-28827 Change-Id: I010246a9ad87cf74974dc168768b1a8625f73260 Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
2013-01-28 19:25:44 +00:00
QT_MODULE_BIN_BASE = $$[QT_INSTALL_BINS]
QT_MODULE_INCLUDE_BASE = $$[QT_INSTALL_HEADERS]
QT_MODULE_IMPORT_BASE = $$[QT_INSTALL_IMPORTS]
QT_MODULE_QML_BASE = $$[QT_INSTALL_QML]
QT_MODULE_LIB_BASE = $$[QT_INSTALL_LIBS]
install host libraries into -hostprefix ... and introduce -hostlibdir configure option for symmetry. the libraries built for the host have no business in the target prefix. in principle this code would even support dynamically linked host libraries, but that's currently unused. Task-number: QTBUG-30591 Change-Id: I8e600fa4911a020fb0e87fbf7ef2f35647c7c4d5 Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com> Reviewed-by: Ivan Romanov <drizt@land.ru>
2013-05-08 13:30:56 +00:00
QT_MODULE_HOST_LIB_BASE = $$[QT_HOST_LIBS]
don't create forwarding module pris for non-prefix builds as everything is built inside the common build/install dir, there is no point in the fwd pri stuff. as a "side effect", this makes it more straight-forward to relocate non-prefix builds, which is the default on windows. Task-number: QTBUG-28827 Change-Id: I010246a9ad87cf74974dc168768b1a8625f73260 Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
2013-01-28 19:25:44 +00:00
QT_MODULE_LIBEXEC_BASE = $$[QT_INSTALL_LIBEXECS]
QT_MODULE_PLUGIN_BASE = $$[QT_INSTALL_PLUGINS]
generate fwd-pris in qt_module_config, not in syncqt the forwarding pri is loaded even if it was still created by syncqt, so a top-level qmake -r will still catch it even in the future. Change-Id: I2e4b556cd06eb88be9ee378662a2e6e1bff67ad7 Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
2012-04-16 12:13:12 +00:00
}
don't create forwarding module pris for non-prefix builds as everything is built inside the common build/install dir, there is no point in the fwd pri stuff. as a "side effect", this makes it more straight-forward to relocate non-prefix builds, which is the default on windows. Task-number: QTBUG-28827 Change-Id: I010246a9ad87cf74974dc168768b1a8625f73260 Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
2013-01-28 19:25:44 +00:00
# Then, inject the new module into the current cache state
!contains(QMAKE_INTERNAL_INCLUDED_FILES, $$MODULE_PRI): \ # before the actual include()!
cache(QMAKE_INTERNAL_INCLUDED_FILES, add transient, MODULE_PRI_FILES)
rewrite handling of private modules instead of being magic attributes of the main modules, the privates are now proper modules of their own. this cleans up some code paths, is more mappable to other build tools, and enables private modules to depend on other private modules. note that the library path is needed even in the "empty" private modules, as in the framework case that's where headers are found. consequently, the modules need to be explicitly marked with the new "no_link" flag. this required some reorganization of qtAddModule(). Change-Id: I8e4f44a609f8d639cc01bcb658256870a627eb63 Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
2013-10-21 19:05:35 +00:00
for(pri, pris_to_load): \
include($$mod_work_pfx/qt_lib_$${pri}.pri)
for(mod, mods_to_load) {
for(var, $$list(VERSION MAJOR_VERSION MINOR_VERSION PATCH_VERSION \
make module .pri files more flexible save the actual library/framework name and framework paths in the .pri file instead of computing them again at use time in qt.prf. qt_no_framework_direct_includes inherently requires a use-time decision, so this ugliness remains. Change-Id: I09b2775e7d8e1d52e3af0d663e1babde10ae4814 Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com> Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
2015-11-19 16:11:05 +00:00
name module depends run_depends plugin_types module_config CONFIG DEFINES \
priority includes bins libs frameworks libexecs plugins imports qml \
winrt: Add capabilities as specified by modules So far no capabilities (but internetClient for Windows 10) were added by default, which forced developers to always manually edit the WINRT_MANIFEST.capabilities(_device) property. This allowed to leave out non-required capabilities and keep the created manifest clean, examples being microphone for multimedia. However, this also breaks first user experience as deeper knowledge about this topic is required. Furthermore this is inconsistent with other platforms like Android, where all capabilities are set by default and developers need to edit the manifest manually in any case. With this change, modules can define the capability set to enable all features in the module. If developers want to disable some again, they need to adapt the generated manifest. From our experience this needs to be done in any case, latest at publishing stage when the store manipulates the manifest. Task-number: QTBUG-38802 Change-Id: I6d522268ee0afbfa00a30dbdd5e6ec9f415bebf3 Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
2016-03-17 09:29:43 +00:00
winrt_capabilities winrt_capabilities_device \
rewrite handling of private modules instead of being magic attributes of the main modules, the privates are now proper modules of their own. this cleans up some code paths, is more mappable to other build tools, and enables private modules to depend on other private modules. note that the library path is needed even in the "empty" private modules, as in the framework case that's where headers are found. consequently, the modules need to be explicitly marked with the new "no_link" flag. this required some reorganization of qtAddModule(). Change-Id: I8e4f44a609f8d639cc01bcb658256870a627eb63 Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
2013-10-21 19:05:35 +00:00
)):defined(QT.$${mod}.$$var, var):cache(QT.$${mod}.$$var, transient)
}
enumerate modules in QT_MODULES, not QT_CONFIG QT_CONFIG is supposed to contain configure output, not a list of modules. for example, enumerating modules is not cleanly possible if modules are mixed with other flags. the conflation was merely historical, due to webkit and phonon doing it this way in the preliminary qt4 modularization. we now have a much cleaner way to query modules (qtHaveModule(<module>), or less recently, !isEmpty(QT.<module>.name)), which is already used throughout Qt. the old way was supposed to be removed for 5.0 already, but it slipped. better do it now, before people actually start using it. Change-Id: Iabdf0cdfaab9cd674f634f4c6ece105b2039c850 Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
2013-03-01 12:11:06 +00:00
cache(QT_MODULES, transient)
generate fwd-pris in qt_module_config, not in syncqt the forwarding pri is loaded even if it was still created by syncqt, so a top-level qmake -r will still catch it even in the future. Change-Id: I2e4b556cd06eb88be9ee378662a2e6e1bff67ad7 Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
2012-04-16 12:13:12 +00:00
} # !build_pass
# Schedule the regular .pri file for installation
CONFIG += qt_install_module
Reference in New Issue Copy Permalink