2022-07-05 11:26:52 +00:00
|
|
|
# Copyright (C) 2022 The Qt Company Ltd.
|
2022-08-19 13:21:34 +00:00
|
|
|
# SPDX-License-Identifier: BSD-3-Clause
|
2022-07-05 11:26:52 +00:00
|
|
|
|
2019-11-01 10:48:23 +00:00
|
|
|
# Generated from tests.pro.
|
Allow building the tests directory as a standalone CMake project
At the moment, Coin builds tests as a separate qmake invocation
against an installed Qt. We need to support the same with CMake.
Change the tests subdirectory to be a standalone CMake project when
CMake does not detect an existing QtTest target while processing the
subdirectory. If the target exists, it means we are building the whole
repo, if the target does not exist, we need to call find_package
to find the installed Qt.
Refactor and move around a few things to make standalone tests build
successfully:
- add a new macro to set up paths to find QtSetup
- add a new macro to find all macOS frameworks
- add a new macro to set up building tests
- add a new macro that actually builds the tests
- export the INSTALL_CMAKE_NAMESPACE value into the BuildInternals
Config file
- export the CMAKE_BUILD_TYPE value, because a test project doesn't
have a .git subdir and thus defaults to be built in Release
mode, even though qtbase might have been built in Debug, so to
avoid the mixing, the propagate the build type
- stop overriding INSTALL_CMAKE_NAMESPACE and
QT_CMAKE_EXPORT_NAMESPACE inside QtSetup if they are set, because
the tests project doesn't specify a major version, and if we
override the values, the moc / uic targets don't get the correct
major version prefix and configuration fails
Change-Id: Ibdb03687302567fe325a15f6d1cb922c76240675
Fixes: QTBUG-75090
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
2019-05-22 08:22:08 +00:00
|
|
|
|
2019-11-01 10:48:23 +00:00
|
|
|
if(QT_BUILD_STANDALONE_TESTS)
|
|
|
|
|
# Add qt_find_package calls for extra dependencies that need to be found when building
|
|
|
|
|
# the standalone tests here.
|
|
|
|
|
# special case begin
|
2020-10-02 13:38:47 +00:00
|
|
|
|
|
|
|
|
# Needed for early feature values, despite it being found later on in qt_build_tests().
|
|
|
|
|
# Needs to be find_package, not qt_find_package, because qt_find_package doesn't handle finding
|
|
|
|
|
# component for a super-package that has already been found.
|
|
|
|
|
find_package(Qt6 ${PROJECT_VERSION} CONFIG REQUIRED COMPONENTS Core)
|
|
|
|
|
|
|
|
|
|
# Modify the optimization flags specifically for qtbase standalone tests. Other projects
|
|
|
|
|
# are handled by qt_enable_cmake_languages().
|
|
|
|
|
qt_internal_set_up_config_optimizations_like_in_qmake()
|
|
|
|
|
|
Allow building the tests directory as a standalone CMake project
At the moment, Coin builds tests as a separate qmake invocation
against an installed Qt. We need to support the same with CMake.
Change the tests subdirectory to be a standalone CMake project when
CMake does not detect an existing QtTest target while processing the
subdirectory. If the target exists, it means we are building the whole
repo, if the target does not exist, we need to call find_package
to find the installed Qt.
Refactor and move around a few things to make standalone tests build
successfully:
- add a new macro to set up paths to find QtSetup
- add a new macro to find all macOS frameworks
- add a new macro to set up building tests
- add a new macro that actually builds the tests
- export the INSTALL_CMAKE_NAMESPACE value into the BuildInternals
Config file
- export the CMAKE_BUILD_TYPE value, because a test project doesn't
have a .git subdir and thus defaults to be built in Release
mode, even though qtbase might have been built in Debug, so to
avoid the mixing, the propagate the build type
- stop overriding INSTALL_CMAKE_NAMESPACE and
QT_CMAKE_EXPORT_NAMESPACE inside QtSetup if they are set, because
the tests project doesn't specify a major version, and if we
override the values, the moc / uic targets don't get the correct
major version prefix and configuration fails
Change-Id: Ibdb03687302567fe325a15f6d1cb922c76240675
Fixes: QTBUG-75090
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
2019-05-22 08:22:08 +00:00
|
|
|
qt_find_package(WrapDBus1 PROVIDED_TARGETS dbus-1)
|
2019-10-04 10:44:10 +00:00
|
|
|
qt_find_package(ICU COMPONENTS i18n uc data PROVIDED_TARGETS ICU::i18n ICU::uc ICU::data)
|
CMake: Handle finding of OpenSSL headers correctly
In Coin when provisioning for Android, we download and configure
the OpenSSL package, but don't actually build it. This means that
find_package(OpenSSL) can find the headers, but not the library,
and thus the package is marked as not found.
Previously the openssl_headers feature used the result of finding
the OpenSSL package, which led to it being disabled in the above
described Android case.
Introduce 2 new find scripts FindWrapOpenSSL and
FindWrapOpenSSLHeaders. FindWrapOpenSSLHeaders wraps FindOpenSSL,
and checks if the headers were found, regardless of the OpenSSL_FOUND
value, which can be used for implementing the openssl_headers feature.
FindWrapOpenSSL uses FindWrapOpenSSLHeaders, and simply wraps the
OpenSSL target if available.
The find scripts also have to set CMAKE_FIND_ROOT_PATH for Android.
Otherwise when someone passes in an OPENSSL_ROOT_DIR, its value will
always be prepended to the Android sysroot, causing the package not
to be found.
Adjust the mapping in helper.py to use the targets created by these
find scripts. This also replaces the openssl/nolink target.
Adjust the projects and tests to use the new target names.
Adjust the compile tests for dtls and oscp to use the
WrapOpenSSLHeaders target, so that the features can be enabled even
if the library is dlopen-ed (like on Android).
Task-number: QTBUG-83371
Change-Id: I738600e5aafef47a57e1db070be40116ca8ab995
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
2020-04-07 15:54:49 +00:00
|
|
|
qt_find_package(WrapOpenSSL PROVIDED_TARGETS WrapOpenSSL::WrapOpenSSL)
|
|
|
|
|
qt_find_package(WrapOpenSSLHeaders PROVIDED_TARGETS WrapOpenSSLHeaders::WrapOpenSSLHeaders)
|
2019-11-01 10:48:23 +00:00
|
|
|
# special case end
|
Allow building the tests directory as a standalone CMake project
At the moment, Coin builds tests as a separate qmake invocation
against an installed Qt. We need to support the same with CMake.
Change the tests subdirectory to be a standalone CMake project when
CMake does not detect an existing QtTest target while processing the
subdirectory. If the target exists, it means we are building the whole
repo, if the target does not exist, we need to call find_package
to find the installed Qt.
Refactor and move around a few things to make standalone tests build
successfully:
- add a new macro to set up paths to find QtSetup
- add a new macro to find all macOS frameworks
- add a new macro to set up building tests
- add a new macro that actually builds the tests
- export the INSTALL_CMAKE_NAMESPACE value into the BuildInternals
Config file
- export the CMAKE_BUILD_TYPE value, because a test project doesn't
have a .git subdir and thus defaults to be built in Release
mode, even though qtbase might have been built in Debug, so to
avoid the mixing, the propagate the build type
- stop overriding INSTALL_CMAKE_NAMESPACE and
QT_CMAKE_EXPORT_NAMESPACE inside QtSetup if they are set, because
the tests project doesn't specify a major version, and if we
override the values, the moc / uic targets don't get the correct
major version prefix and configuration fails
Change-Id: Ibdb03687302567fe325a15f6d1cb922c76240675
Fixes: QTBUG-75090
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
2019-05-22 08:22:08 +00:00
|
|
|
endif()
|
|
|
|
|
qt_build_tests()
|
