AuroraMiddleware/qt5base-lts
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
efba2530f9
qt5base-lts/mkspecs/devices/linux-rasp-pi-g++/qmake.conf

53 lines
1.6 KiB
Plaintext
Raw Normal View History

Adds a list of supported platforms in PI mkspec Change-Id: I7e67ffc41c7a389750e1ab342a570a1dda8ff077 Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
2017-03-14 07:01:37 +00:00
# qmake configuration for:
# - Raspberry PI
# - Raspberry PI Zero
Adjust wiki links to the new redirect it looks nicer this way Change-Id: I872976bdef5f581187a758aa92b02e2f5f32b130 Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
2015-03-03 10:27:28 +00:00
# http://wiki.qt.io/RaspberryPi
device: Add device support for the Broadcom Raspberry PI Add mkspec for the Raspberry PI platform to be used in conjunction with the -device support in configure. This allows you to build Qt with the application libraries provided by the Raspberry PI foundation. The Raspberry PI is described here: http://en.wikipedia.org/wiki/Raspberry_Pi and its use with Qt is documented here: http://wiki.qt-project.org/Devices/RaspberryPi Change-Id: Ib8d11d0a469edaaf34ccc04cf33a42a725fc2bdb Reviewed-by: Girish Ramakrishnan <girish.1.ramakrishnan@nokia.com> Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
2012-03-28 19:23:50 +00:00
Generalize common device properties out of Raspberry Pi spec Change-Id: I58cc9c9219bf3e9ed8e7401cb66f968306d7bfc9 Reviewed-by: Donald Carr <donald.carr@nokia.com> Reviewed-by: Girish Ramakrishnan <girish.1.ramakrishnan@nokia.com>
2012-05-31 03:18:26 +00:00
include(../common/linux_device_pre.conf)
device: Add device support for the Broadcom Raspberry PI Add mkspec for the Raspberry PI platform to be used in conjunction with the -device support in configure. This allows you to build Qt with the application libraries provided by the Raspberry PI foundation. The Raspberry PI is described here: http://en.wikipedia.org/wiki/Raspberry_Pi and its use with Qt is documented here: http://wiki.qt-project.org/Devices/RaspberryPi Change-Id: Ib8d11d0a469edaaf34ccc04cf33a42a725fc2bdb Reviewed-by: Girish Ramakrishnan <girish.1.ramakrishnan@nokia.com> Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
2012-03-28 19:23:50 +00:00
make mkspecs not mess up -rpath-link adding shared install paths via QMAKE_LFLAGS in the spec has the tiny side effect that they are searched _first_, which is generally a really bad idea - they should be _last_. for that purpose, introduce QMAKE_RPATHLINKDIR_POST, and migrate all specs to use it. QMAKE_RPATHDIR_POST is added for consistency, but not actually used. Task-number: QTBUG-59457 Change-Id: Iac6cda5e9111ef8cca454a69861fe8408bb40589 Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
2017-05-16 16:06:24 +00:00
QMAKE_RPATHLINKDIR_POST += $$[QT_SYSROOT]/opt/vc/lib
Introduce Arch Linux specific link line to pi mkspec Change-Id: I77c99a2f5e25c28ad2d4a13e3b56d3603cd5bb64 Reviewed-by: Girish Ramakrishnan <girish.1.ramakrishnan@nokia.com>
2012-05-04 21:38:12 +00:00
Clean up Raspberry Pi spec Introduce platform libs hook to handle/allow device specific initialization and the associated symbol resolution Change-Id: I098b07dcb581390d369d9165c6cedc7ace1e088a Reviewed-by: Girish Ramakrishnan <girish.1.ramakrishnan@nokia.com>
2012-05-17 22:49:57 +00:00
QMAKE_LIBDIR_OPENGL_ES2 = $$[QT_SYSROOT]/opt/vc/lib
QMAKE_LIBDIR_EGL = $$QMAKE_LIBDIR_OPENGL_ES2
RaspberryPi: Enable building with OpenVG support Change-Id: Ib803e1d98b5d81d142b20d18e92d88942b9c4af5 Reviewed-by: Laszlo Agocs <laszlo.agocs@theqtcompany.com>
2015-11-04 22:13:44 +00:00
QMAKE_LIBDIR_OPENVG = $$QMAKE_LIBDIR_OPENGL_ES2
device: Add device support for the Broadcom Raspberry PI Add mkspec for the Raspberry PI platform to be used in conjunction with the -device support in configure. This allows you to build Qt with the application libraries provided by the Raspberry PI foundation. The Raspberry PI is described here: http://en.wikipedia.org/wiki/Raspberry_Pi and its use with Qt is documented here: http://wiki.qt-project.org/Devices/RaspberryPi Change-Id: Ib8d11d0a469edaaf34ccc04cf33a42a725fc2bdb Reviewed-by: Girish Ramakrishnan <girish.1.ramakrishnan@nokia.com> Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
2012-03-28 19:23:50 +00:00
raspberry pi: add /opt/vc/include/interface/vmcs_host/linux to GL includes This matches upstream changes on https://github.com/raspberrypi/firmware/ Change-Id: Ie28c2fa574d5cd097c033926970db40e8904e42e Reviewed-by: Thomas McGuire <thomas.mcguire@kdab.com>
2013-03-09 13:57:43 +00:00
QMAKE_INCDIR_EGL = $$[QT_SYSROOT]/opt/vc/include \
$$[QT_SYSROOT]/opt/vc/include/interface/vcos/pthreads \
$$[QT_SYSROOT]/opt/vc/include/interface/vmcs_host/linux
device: Add device support for the Broadcom Raspberry PI Add mkspec for the Raspberry PI platform to be used in conjunction with the -device support in configure. This allows you to build Qt with the application libraries provided by the Raspberry PI foundation. The Raspberry PI is described here: http://en.wikipedia.org/wiki/Raspberry_Pi and its use with Qt is documented here: http://wiki.qt-project.org/Devices/RaspberryPi Change-Id: Ib8d11d0a469edaaf34ccc04cf33a42a725fc2bdb Reviewed-by: Girish Ramakrishnan <girish.1.ramakrishnan@nokia.com> Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
2012-03-28 19:23:50 +00:00
QMAKE_INCDIR_OPENGL_ES2 = $${QMAKE_INCDIR_EGL}
RaspberryPi: Enable building with OpenVG support Change-Id: Ib803e1d98b5d81d142b20d18e92d88942b9c4af5 Reviewed-by: Laszlo Agocs <laszlo.agocs@theqtcompany.com>
2015-11-04 22:13:44 +00:00
QMAKE_INCDIR_OPENVG = $${QMAKE_INCDIR_EGL}
device: Add device support for the Broadcom Raspberry PI Add mkspec for the Raspberry PI platform to be used in conjunction with the -device support in configure. This allows you to build Qt with the application libraries provided by the Raspberry PI foundation. The Raspberry PI is described here: http://en.wikipedia.org/wiki/Raspberry_Pi and its use with Qt is documented here: http://wiki.qt-project.org/Devices/RaspberryPi Change-Id: Ib8d11d0a469edaaf34ccc04cf33a42a725fc2bdb Reviewed-by: Girish Ramakrishnan <girish.1.ramakrishnan@nokia.com> Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
2012-03-28 19:23:50 +00:00
Clean up Raspberry Pi spec Introduce platform libs hook to handle/allow device specific initialization and the associated symbol resolution Change-Id: I098b07dcb581390d369d9165c6cedc7ace1e088a Reviewed-by: Girish Ramakrishnan <girish.1.ramakrishnan@nokia.com>
2012-05-17 22:49:57 +00:00
QMAKE_LIBS_EGL = -lEGL -lGLESv2
RaspberryPi: Enable building with OpenVG support Change-Id: Ib803e1d98b5d81d142b20d18e92d88942b9c4af5 Reviewed-by: Laszlo Agocs <laszlo.agocs@theqtcompany.com>
2015-11-04 22:13:44 +00:00
QMAKE_LIBS_OPENVG = -lEGL -lOpenVG -lGLESv2
Clean up Raspberry Pi spec Introduce platform libs hook to handle/allow device specific initialization and the associated symbol resolution Change-Id: I098b07dcb581390d369d9165c6cedc7ace1e088a Reviewed-by: Girish Ramakrishnan <girish.1.ramakrishnan@nokia.com>
2012-05-17 22:49:57 +00:00
Turn bcm_host library into makeSpec source The bcm_host library couldn't be detected anymore. Let the makespec provide LIBDIR, INCDIR and LIBS for bcm_host to fix this. Change-Id: I4bc268504dc48edaf2884f1c14b745260fd9112c Fixes: QTBUG-73727 Reviewed-by: Kai Koehne <kai.koehne@qt.io>
2019-02-11 14:00:09 +00:00
QMAKE_INCDIR_BCM_HOST = $$[QT_SYSROOT]/opt/vc/include
QMAKE_LIBDIR_BCM_HOST = $$[QT_SYSROOT]/opt/vc/lib
QMAKE_LIBS_BCM_HOST = -lbcm_host
Update Raspberry Pi mkspec Hard float enabled Raspbian image is now primary platform provided by the Raspberry Pi foundation. Change-Id: I2d59ad26fac459907b4f51764975a3e6e29c6033 Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com> Reviewed-by: Thomas Senyk <thomas.senyk@pelagicore.com> Reviewed-by: Girish Ramakrishnan <girish.1.ramakrishnan@nokia.com>
2012-07-11 18:21:24 +00:00
contains(DISTRO, squeeze) {
#Debian Squeeze: Legacy everything
QMAKE_LIBS_OPENGL_ES2 = -lGLESv2 -lEGL
Clean up Raspberry Pi spec Introduce platform libs hook to handle/allow device specific initialization and the associated symbol resolution Change-Id: I098b07dcb581390d369d9165c6cedc7ace1e088a Reviewed-by: Girish Ramakrishnan <girish.1.ramakrishnan@nokia.com>
2012-05-17 22:49:57 +00:00
} else:contains(DISTRO, arch) {
#On principle: no wizardry required
} else {
Update Raspberry Pi mkspec Hard float enabled Raspbian image is now primary platform provided by the Raspberry Pi foundation. Change-Id: I2d59ad26fac459907b4f51764975a3e6e29c6033 Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com> Reviewed-by: Thomas Senyk <thomas.senyk@pelagicore.com> Reviewed-by: Girish Ramakrishnan <girish.1.ramakrishnan@nokia.com>
2012-07-11 18:21:24 +00:00
#This is not strictly necessary
DISTRO_OPTS += deb-multi-arch
DISTRO_OPTS += hard-float
Clean up Raspberry Pi spec Introduce platform libs hook to handle/allow device specific initialization and the associated symbol resolution Change-Id: I098b07dcb581390d369d9165c6cedc7ace1e088a Reviewed-by: Girish Ramakrishnan <girish.1.ramakrishnan@nokia.com>
2012-05-17 22:49:57 +00:00
}
Fix '=' alignment and replace tabs in *.conf (whitespace only change) Replace all tabs with proper space characters and consistently align the '=' characters. The default alignment for the '=' of 25 characters has been left as is to get a minimal diff. Lines with the '=' further to the right and those belonging to 'proper code (TM)' have not been touched. The work was mostly done using the following python script (might come in handy again...): import sys, re indent_eq = 25 + 0*4 # 25 characters was the most widely used indentation for the '=' character p = re.compile(r'(\w+)[ \t]*([\-\+]?)(=$|= )[ \t]*(.*$)') for fn in sys.argv[1:]: with open(fn, 'r+') as f: lines = [] nl_count = 0 continuity_indent = None for l in f: m = p.match(l) nl = l if m: n_spaces = max(m.start(3), indent_eq - 1) - len(m.group(2)) - len(m.group(1)) if m.group(2) and m.start(2) >= indent_eq-1 and m.start(2) % 4 == 0: n_spaces -= 1 # left-shift '+=' by one if the '+' is aligned to a multiple of 4 n_spaces = max(1, n_spaces) # we want at least one space before '='/'+=' nl = m.group(1) + ' '*n_spaces + ''.join(m.group(2,3,4)) + '\n' continuity_indent = nl.find('= ') + 2 if l[-2] == '\\' else None # remember indent on '\\$' elif continuity_indent: nl = ' '*continuity_indent + l.lstrip() if l[-2] != '\\': # check when to stop the continuation continuity_indent = None elif l.startswith('#'): nl = l.expandtabs(2) if l != nl: nl_count += 1 lines.append(nl) if nl_count > 0: print fn, nl_count, len(lines) f.seek(0) f.writelines(lines) f.truncate() Change-Id: I1d2870d0a2fe2e30d398c140fe523e69dd20c81b Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
2013-03-19 01:57:31 +00:00
QMAKE_CFLAGS += \
Clean up Raspberry Pi spec Introduce platform libs hook to handle/allow device specific initialization and the associated symbol resolution Change-Id: I098b07dcb581390d369d9165c6cedc7ace1e088a Reviewed-by: Girish Ramakrishnan <girish.1.ramakrishnan@nokia.com>
2012-05-17 22:49:57 +00:00
-marm \
device: Add device support for the Broadcom Raspberry PI Add mkspec for the Raspberry PI platform to be used in conjunction with the -device support in configure. This allows you to build Qt with the application libraries provided by the Raspberry PI foundation. The Raspberry PI is described here: http://en.wikipedia.org/wiki/Raspberry_Pi and its use with Qt is documented here: http://wiki.qt-project.org/Devices/RaspberryPi Change-Id: Ib8d11d0a469edaaf34ccc04cf33a42a725fc2bdb Reviewed-by: Girish Ramakrishnan <girish.1.ramakrishnan@nokia.com> Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
2012-03-28 19:23:50 +00:00
-mfpu=vfp \
-mtune=arm1176jzf-s \
-march=armv6zk \
-mabi=aapcs-linux
Apply compiler platform flags to debug builds as well Compiler flags like CPU architecture and FPU should be set on QMAKE_CFLAGS instead of QMAKE_CFLAGS_RELEASE, as the latter only applies to release builds Change-Id: I2e729a9e413934e904fc2810394e118940b8557f Reviewed-by: Girish Ramakrishnan <girish.1.ramakrishnan@nokia.com>
2012-05-16 22:59:00 +00:00
QMAKE_CXXFLAGS = $$QMAKE_CFLAGS
device: Add device support for the Broadcom Raspberry PI Add mkspec for the Raspberry PI platform to be used in conjunction with the -device support in configure. This allows you to build Qt with the application libraries provided by the Raspberry PI foundation. The Raspberry PI is described here: http://en.wikipedia.org/wiki/Raspberry_Pi and its use with Qt is documented here: http://wiki.qt-project.org/Devices/RaspberryPi Change-Id: Ib8d11d0a469edaaf34ccc04cf33a42a725fc2bdb Reviewed-by: Girish Ramakrishnan <girish.1.ramakrishnan@nokia.com> Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
2012-03-28 19:23:50 +00:00
eglfs: Pluginize RPi, iMX6 and Mali backends eglfs does not depend on the device makespecs anymore when it comes to these device integration backends (hooks). Instead, backends are autodetected by configure. The name of the preferred plugin is still set in the device makespecs. This is optional. When not set and there is more than one plugin present in the system, the environment variable QT_QPA_EGLFS_INTEGRATION will have to be set at runtime. In the absence of that, the order is undefined. Change-Id: Ie1ced2c9aa1beff2adb13b4fdea7c499cb5a6aab Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com> Reviewed-by: Andy Nichols <andy.nichols@theqtcompany.com>
2015-03-02 15:09:22 +00:00
# Preferred eglfs backend
EGLFS_DEVICE_INTEGRATION = eglfs_brcm
device: Add device support for the Broadcom Raspberry PI Add mkspec for the Raspberry PI platform to be used in conjunction with the -device support in configure. This allows you to build Qt with the application libraries provided by the Raspberry PI foundation. The Raspberry PI is described here: http://en.wikipedia.org/wiki/Raspberry_Pi and its use with Qt is documented here: http://wiki.qt-project.org/Devices/RaspberryPi Change-Id: Ib8d11d0a469edaaf34ccc04cf33a42a725fc2bdb Reviewed-by: Girish Ramakrishnan <girish.1.ramakrishnan@nokia.com> Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
2012-03-28 19:23:50 +00:00
Fixed mkspecs/devices/linux_device_post.conf for non-arm platforms. Now arm specific -mfloat-abi flag is added to compiler flags only for arm architecture in linux_arm_device_post.conf. Change-Id: Ie77ac6e0717d9d1fd9c14e1d6a26e86f08ab418c Reviewed-by: Jarosław Staniek <staniek@kde.org> Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
2013-07-18 20:45:47 +00:00
include(../common/linux_arm_device_post.conf)
Adjust device mkspecs to use qpa default plugin var Change-Id: If7be3517a423324e744805e8508eb9277a600ed4 Reviewed-by: Girish Ramakrishnan <girish.1.ramakrishnan@nokia.com>
2012-04-19 23:40:02 +00:00
device: Add device support for the Broadcom Raspberry PI Add mkspec for the Raspberry PI platform to be used in conjunction with the -device support in configure. This allows you to build Qt with the application libraries provided by the Raspberry PI foundation. The Raspberry PI is described here: http://en.wikipedia.org/wiki/Raspberry_Pi and its use with Qt is documented here: http://wiki.qt-project.org/Devices/RaspberryPi Change-Id: Ib8d11d0a469edaaf34ccc04cf33a42a725fc2bdb Reviewed-by: Girish Ramakrishnan <girish.1.ramakrishnan@nokia.com> Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
2012-03-28 19:23:50 +00:00
load(qt_config)
Reference in New Issue Copy Permalink