qt5base-lts/bin/syncqt

#!/usr/bin/perl -w
#############################################################################
##
## Copyright (C) 2011 Nokia Corporation and/or its subsidiary(-ies).
## All rights reserved.
## Contact: Nokia Corporation (qt-info@nokia.com)
##
## This file is part of the build configuration tools of the Qt Toolkit.
##
## $QT_BEGIN_LICENSE:LGPL$
## GNU Lesser General Public License Usage
## This file may be used under the terms of the GNU Lesser General Public
## License version 2.1 as published by the Free Software Foundation and
## appearing in the file LICENSE.LGPL included in the packaging of this
## file. Please review the following information to ensure the GNU Lesser
## General Public License version 2.1 requirements will be met:
## http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
##
## In addition, as a special exception, Nokia gives you certain additional
## rights. These rights are described in the Nokia Qt LGPL Exception
## version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
##
## GNU General Public License Usage
## Alternatively, this file may be used under the terms of the GNU General
## Public License version 3.0 as published by the Free Software Foundation
## and appearing in the file LICENSE.GPL included in the packaging of this
## file. Please review the following information to ensure the GNU General
## Public License version 3.0 requirements will be met:
## http://www.gnu.org/copyleft/gpl.html.
##
## Other Usage
## Alternatively, this file may be used in accordance with the terms and
## conditions contained in a signed written agreement between you and Nokia.
##
##
##
##
##
## $QT_END_LICENSE$
##
#############################################################################

#
# Synchronizes Qt header files - internal development tool.
#

# use packages -------------------------------------------------------
use File::Basename;
use File::Path;
use Cwd;
use Cwd 'abs_path';
use Config;
use strict;
use English qw(-no_match_vars );

# set output basedir to be where ever syncqt is run from
our $out_basedir = getcwd();
$out_basedir =~ s=\\=/=g;
our $basedir;
our $quoted_basedir;


# try to figure out where QtBase is located
# normally the script location should be enough, if not fall back to
# QTDIR environment variable. If that doesn't work, later ask the
# user to use the -qtdir option explicitly.
my $qtbasedir = $ENV{"QTDIR"};
$qtbasedir = dirname(dirname($0)) if (!$qtbasedir);
$qtbasedir =~ s=\\=/=g if (defined $qtbasedir);

# will be defined based on the modules sync.profile
our (%modules, %moduleheaders, @allmoduleheadersprivate, %classnames, %mastercontent, %modulepris, %explicitheaders, %deprecatedheaders);

# global variables (modified by options)
my $isunix = 0;
my $module = 0;
my $showonly = 0;
my $verbose_level = 1;
my $remove_stale = 1;
my $force_win = 0;
my $force_relative = 0;
my $check_includes = 0;
my $copy_headers = 0;
my $create_uic_class_map = 0;
my $create_private_headers = 1;
my $module_fwd = "";
my $cache_module_fwd = 0;
my $developer_build = 0;
my $no_module_version_header = 0;
my $makefile_generator = "";
my @modules_to_sync ;
$force_relative = 1 if ( -d "/System/Library/Frameworks" );


# functions ----------------------------------------------------------

######################################################################
# Syntax:  showUsage()
# Params:  -none-
#
# Purpose: Show the usage of the script.
# Returns: -none-
######################################################################
sub showUsage
{
    print "$0 usage:\n";
    print "  <module directory>    Specifies which module to sync header files for (required for shadow builds!)\n\n";

    print "  -copy                 Copy headers instead of include-fwd(default: " . ($copy_headers ? "yes" : "no") . ")\n";
    print "  -remove-stale         Removes stale headers              (default: " . ($remove_stale ? "yes" : "no") . ")\n";
    print "  -relative             Force relative symlinks            (default: " . ($force_relative ? "yes" : "no") . ")\n";
    print "  -windows              Force platform to Windows          (default: " . ($force_win ? "yes" : "no") . ")\n";
    print "  -showonly             Show action but not perform        (default: " . ($showonly ? "yes" : "no") . ")\n";
    print "  -outdir <PATH>        Specify output directory for sync  (default: $out_basedir)\n";
    print "  -qtdir <PATH>         Set the path to QtBase             (detected: " . (defined $qtbasedir ? $qtbasedir : "-none-") . ")\n";
    print "  -quiet                Only report problems, not activity (same as -verbose 0)\n";
    print "  -v, -verbose <level>  Sets the verbosity level (max. 4)  (default: $verbose_level)\n";
    print "                        The short form increases the level by +1\n";
    print "  -separate-module <NAME>:<PROFILEDIR>:<HEADERDIR>\n";
    print "                        Create headers for <NAME> with original headers in\n";
    print "                        <HEADERDIR> relative to <PROFILEDIR> \n";
    print "  -private              Force copy private headers         (default: " . ($create_private_headers ? "yes" : "no") . ")\n";
    print "  -module-fwd <PATH>    Create fwd includes for module pri files in the given\n";
    print "                        path (default: none)\n";
    print "  -cache-module-fwd     Create a .qmake.cache file to cache the location of the\n";
    print "                        fwd includes\n";
    print "  -developer-build      Point libraries and binaries to a common directory for\n";
    print "                        easy development\n";
    print "  -no-module-version-header\n";
    print "                        Don't create module version header file\n";
    print "  -generator <PATH>     Specify the makefile generator setting (e.g. 'UNIX')\n";
    print "  -help                 This help\n";
    exit 0;
}

######################################################################
# Syntax:  checkUnix()
# Params:  -none-
#
# Purpose: Check if script runs on a Unix system or not. Cygwin
#          systems are _not_ detected as Unix systems.
# Returns: 1 if a unix system, else 0.
######################################################################
sub checkUnix {
    my ($r) = 0;
    if ( $force_win != 0) {
        return 0;
    } elsif ( -f "/bin/uname" ) {
        $r = 1;
        (-f "\\bin\\uname") && ($r = 0);
    } elsif ( -f "/usr/bin/uname" ) {
        $r = 1;
        (-f "\\usr\\bin\\uname") && ($r = 0);
    }
    if($r) {
        $_ = $Config{'osname'};
        $r = 0 if( /(ms)|(cyg)win/i );
    }
    return $r;
}

sub checkRelative {
    my ($dir) = @_;
    return 0 if($dir =~ /^\//);
    return 0 if(!checkUnix() && $dir =~ /[a-zA-Z]:[\/\\]/);
    return 1;
}

######################################################################
# Syntax:  shouldMasterInclude(iheader)
# Params:  iheader, string, filename to verify inclusion
#
# Purpose: Determines if header should be in the master include file.
# Returns: 0 if file contains "#pragma qt_no_master_include" or not
#          able to open, else 1.
######################################################################
sub shouldMasterInclude {
    my ($iheader) = @_;
    return 0 if(basename($iheader) =~ /_/);
    return 0 if(basename($iheader) =~ /qconfig/);
    if(open(F, "<$iheader")) {
        while(<F>) {
            chomp;
            return 0 if(/^\#pragma qt_no_master_include$/);
        }
        close(F);
    } else {
        return 0;
    }
    return 1;
}

######################################################################
# Syntax:  classNames(iheader)
# Params:  iheader, string, filename to parse for classname "symlinks"
#
# Purpose: Scans through iheader to find all classnames that should be
#          synced into library's include structure.
# Returns: List of all class names in a file.
######################################################################
sub classNames {
    my @ret;
    my ($iheader) = @_;

    my $classname = $classnames{basename($iheader)};
    push @ret, $classname if ($classname);

    my $parsable = "";
    if(open(F, "<$iheader")) {
        while(<F>) {
            my $line = $_;
            chomp $line;
                        chop $line if ($line =~ /\r$/);
            if($line =~ /^\#/) {
                if($line =~ /\\$/) {
                    while($line = <F>) {
                        chomp $line;
                        last unless($line =~ /\\$/);
                    }
                }
                return @ret if($line =~ m/^#pragma qt_sync_stop_processing/);
                push(@ret, $1) if($line =~ m/^#pragma qt_class\(([^)]*)\)[\r\n]*$/);
                $line = 0;
            }
            if($line) {
                $line =~ s,//.*$,,; #remove c++ comments
                $line .= ";" if($line =~ m/^Q_[A-Z_]*\(.*\)[\r\n]*$/); #qt macro
                $line .= ";" if($line =~ m/^QT_(BEGIN|END)_HEADER[\r\n]*$/); #qt macro
                $line .= ";" if($line =~ m/^QT_(BEGIN|END)_NAMESPACE[\r\n]*$/); #qt macro
                $line .= ";" if($line =~ m/^QT_MODULE\(.*\)[\r\n]*$/); # QT_MODULE macro
                $parsable .= " " . $line;
            }
        }
        close(F);
    }

    my $last_definition = 0;
    my @namespaces;
    for(my $i = 0; $i < length($parsable); $i++) {
        my $definition = 0;
        my $character = substr($parsable, $i, 1);
        if($character eq "/" && substr($parsable, $i+1, 1) eq "*") { #I parse like this for greedy reasons
            for($i+=2; $i < length($parsable); $i++) {
                my $end = substr($parsable, $i, 2);
                if($end eq "*/") {
                    $last_definition = $i+2;
                    $i++;
                    last;
                }
            }
        } elsif($character eq "{") {
            my $brace_depth = 1;
            my $block_start = $i + 1;
          BLOCK: for($i+=1; $i < length($parsable); $i++) {
              my $ignore = substr($parsable, $i, 1);
              if($ignore eq "{") {
                  $brace_depth++;
              } elsif($ignore eq "}") {
                  $brace_depth--;
                  unless($brace_depth) {
                      for(my $i2 = $i+1; $i2 < length($parsable); $i2++) {
                          my $end = substr($parsable, $i2, 1);
                          if($end eq ";" || $end ne " ") {
                              $definition = substr($parsable, $last_definition, $block_start - $last_definition) . "}";
                              $i = $i2 if($end eq ";");
                              $last_definition = $i + 1;
                              last BLOCK;
                          }
                      }
                  }
              }
          }
        } elsif($character eq ";") {
            $definition = substr($parsable, $last_definition, $i - $last_definition + 1);
            $last_definition = $i + 1;
        } elsif($character eq "}") {
            # a naked } must be a namespace ending
            # if it's not a namespace, it's eaten by the loop above
            pop @namespaces;
            $last_definition = $i + 1;
        }

        if (substr($parsable, $last_definition, $i - $last_definition + 1) =~ m/ namespace ([^ ]*) /
            && substr($parsable, $i+1, 1) eq "{") {
            push @namespaces, $1;

            # Eat the opening { so that the condensing loop above doesn't see it
            $i++;
            $last_definition = $i + 1;
        }

        if($definition) {
            $definition =~ s=[\n\r]==g;
            my @symbols;
            if($definition =~ m/^ *typedef *.*\(\*([^\)]*)\)\(.*\);$/) {
                push @symbols, $1;
            } elsif($definition =~ m/^ *typedef +(.*) +([^ ]*);$/) {
                push @symbols, $2;
            } elsif($definition =~ m/^ *(template *<.*> *)?(class|struct) +([^ ]* +)?([^<\s]+) ?(<[^>]*> ?)?\s*((,|:)\s*(public|protected|private) *.*)? *\{\}$/) {
                push @symbols, $4;
            } elsif($definition =~ m/^ *Q_DECLARE_.*ITERATOR\((.*)\);$/) {
                push @symbols, "Q" . $1 . "Iterator";
                push @symbols, "QMutable" . $1 . "Iterator";
            }

            foreach my $symbol (@symbols) {
                $symbol = (join("::", @namespaces) . "::" . $symbol) if (scalar @namespaces);
                push @ret, $symbol
                    if ($symbol =~ /^Q[^:]*$/           # no-namespace, starting with Q
                        || $symbol =~ /^Phonon::/);     # or in the Phonon namespace
            }
        }
    }
    return @ret;
}

sub make_path {
    my ($dir, $lib, $be_verbose) = @_;
    unless(-e $dir) {
        mkpath $dir;
        $dir = "<outbase>" . substr($dir, length($out_basedir)) if ($be_verbose < 3);
        print "$lib: mkpath $dir\n" if ($be_verbose > 1);
    }
}

######################################################################
# Syntax:  syncHeader(header, iheader, copy, timestamp)
# Params:  header, string, filename to create "symlink" for
#          iheader, string, destination name of symlink
#          copy, forces header to be a copy of iheader
#          timestamp, the requested modification time if copying
#
# Purpose: Syncronizes header to iheader
# Returns: 1 if successful, else 0.
######################################################################
sub syncHeader {
    my ($lib, $header, $iheader, $copy, $ts) = @_;
    $iheader =~ s=\\=/=g;
    $header =~ s=\\=/=g;
    return copyFile($lib, $iheader, $header) if($copy);

    unless(-e $header) {
        my $header_dir = dirname($header);
        make_path($header_dir, $lib, $verbose_level);

        #write it
        my $iheader_out = fixPaths($iheader, $header_dir);
        open HEADER, ">$header" || die "Could not open $header for writing!\n";
        print HEADER "#include \"$iheader_out\"\n";
        close HEADER;
        if(defined($ts)) {
            utime(time, $ts, $header) or die "$iheader, $header";
        }
        return 1;
    }
    return 0;
}

######################################################################
# Syntax:  fixPaths(file, dir)
# Params:  file, string, filepath to be made relative to dir
#          dir, string, dirpath for point of origin
#
# Purpose: file is made relative (if possible) of dir.
# Returns: String with the above applied conversion.
######################################################################
sub fixPaths {
    my ($file, $dir) = @_;
    $file =~ s=\\=/=g;
    $dir =~ s=\\=/=g;

    #setup
    my $ret = $file;
    $ret =~ s,/cygdrive/([a-zA-Z])/,$1:/,g;
    my $file_dir = dirname($file);
    if($file_dir eq ".") {
        $file_dir = getcwd();
        $file_dir =~ s=\\=/=g;
    }
    $file_dir =~ s,/cygdrive/([a-zA-Z])/,$1:/,g;
    if($dir eq ".") {
        $dir = getcwd();
        $dir =~ s=\\=/=g;
    }
    $dir =~ s,/cygdrive/([a-zA-Z])/,$1:/,g;
    return basename($file) if($file_dir eq $dir);

    #guts
    while ($file_dir =~ s,/[^/]+/\.\./,/,) {}
    while ($dir =~ s,/[^/]+/\.\./,/,) {}
    my $match_dir = 0;
    for(my $i = 1; $i < length($file_dir); $i++) {
        my $slash = index($file_dir, "/", $i);
        last if($slash == -1);
        my $tmp = substr($file_dir, 0, $slash);
        last unless($dir =~ m,^\Q$tmp\E/,);
        $match_dir = $tmp;
        $i = $slash;
    }
    if($match_dir) {
        my $after = substr($dir, length($match_dir));
        my $count = ($after =~ tr,/,,);
        my $dots = "";
        for(my $i = 0; $i < $count; $i++) {
            $dots .= "../";
        }
        $ret =~ s,^\Q$match_dir\E,$dots,;
    }
    $ret =~ s,/+,/,g;
    return $ret;
}

######################################################################
# Syntax:  fileContents(filename)
# Params:  filename, string, filename of file to return contents
#
# Purpose: Get the contents of a file.
# Returns: String with contents of the file, or empty string if file
#          doens't exist.
# Warning: Dies if it does exist but script cannot get read access.
######################################################################
sub fileContents {
    my ($filename) = @_;
    my $filecontents = "";
    if (-e $filename) {
        open(I, "< $filename") || die "Could not open $filename for reading, read block?";
        local $/;
        binmode I;
        $filecontents = <I>;
        close I;
    }
    return $filecontents;
}

######################################################################
# Syntax:  fileCompare(file1, file2)
# Params:  file1, string, filename of first file
#          file2, string, filename of second file
#
# Purpose: Determines if files are equal, and which one is newer.
# Returns: 0 if files are equal no matter the timestamp, -1 if file1
#          is newer, 1 if file2 is newer.
######################################################################
sub fileCompare {
    my ($file1, $file2) = @_;
    my $file1contents = fileContents($file1);
    my $file2contents = fileContents($file2);
    if (! -e $file1) { return 1; }
    if (! -e $file2) { return -1; }
    return $file1contents ne $file2contents ? (stat($file2))[9] <=> (stat($file1))[9] : 0;
}

######################################################################
# Syntax:  copyFile(file, ifile)
# Params:  file, string, filename to create duplicate for
#          ifile, string, destination name of duplicate
#
# Purpose: Keeps files in sync so changes in the newer file will be
#          written to the other.
# Returns: 1 if files were synced, else 0.
# Warning: Dies if script cannot get write access.
######################################################################
sub copyFile
{
    my ($lib, $file,$ifile, $copy,$knowdiff,$filecontents,$ifilecontents) = @_;
    # Bi-directional synchronization
    open( I, "< " . $file ) || die "Could not open $file for reading";
    local $/;
    binmode I;
    $filecontents = <I>;
    close I;
    if ( open(I, "< " . $ifile) ) {
        local $/;
        binmode I;
        $ifilecontents = <I>;
        close I;
        $copy = fileCompare($file, $ifile);
        $knowdiff = 0,
    } else {
        $copy = -1;
        $knowdiff = 1;
    }

    if ( $knowdiff || ($filecontents ne $ifilecontents) ) {
        if ( $copy > 0 ) {
            my $file_dir = dirname($file);
            make_path($file_dir, $lib, $verbose_level);
            open(O, "> " . $file) || die "Could not open $file for writing (no write permission?)";
            local $/;
            binmode O;
            print O $ifilecontents;
            close O;
            utime time, (stat($ifile))[9], $file;
            return 1;
        } elsif ( $copy < 0 ) {
            my $ifile_dir = dirname($ifile);
            make_path($ifile_dir, $lib, $verbose_level);
            open(O, "> " . $ifile) || die "Could not open $ifile for writing (no write permission?)";
            local $/;
            binmode O;
            print O $filecontents;
            close O;
            utime time, (stat($file))[9], $ifile;
            return 1;
        }
    }
    return 0;
}

######################################################################
# Syntax:  symlinkFile(file, ifile)
# Params:  file, string, filename to create "symlink" for
#          ifile, string, destination name of symlink
#
# Purpose: File is symlinked to ifile (or copied if filesystem doesn't
#          support symlink).
# Returns: 1 on success, else 0.
######################################################################
sub symlinkFile
{
    my ($lib, $file, $ifile) = @_;

    if ($isunix) {
        print "$lib: symlink created for $file " if ($verbose_level);
        if ( $force_relative && ($ifile =~ /^$quoted_basedir/)) {
            my $t = getcwd();
            my $c = -1;
            my $p = "../";
            $t =~ s-^$quoted_basedir/--;
            $p .= "../" while( ($c = index( $t, "/", $c + 1)) != -1 );
            $file =~ s-^$quoted_basedir/-$p-;
            print " ($file)\n" if($verbose_level);
        }
        print "\n" if($verbose_level);
        return symlink($file, $ifile);
    }
    return copyFile($lib, $file, $ifile);
}

######################################################################
# Syntax:  findFiles(dir, match, descend)
# Params:  dir, string, directory to search for name
#          match, string, regular expression to match in dir
#          descend, integer, 0 = non-recursive search
#                            1 = recurse search into subdirectories
#
# Purpose: Finds files matching a regular expression.
# Returns: List of matching files.
#
# Examples:
#   findFiles("/usr","\.cpp$",1)  - finds .cpp files in /usr and below
#   findFiles("/tmp","^#",0)      - finds #* files in /tmp
######################################################################
sub findFiles {
    my ($dir,$match,$descend) = @_;
    my ($file,$p,@files);
    local(*D);
    $dir =~ s=\\=/=g;
    ($dir eq "") && ($dir = ".");
    if ( opendir(D,$dir) ) {
        if ( $dir eq "." ) {
            $dir = "";
        } else {
            ($dir =~ /\/$/) || ($dir .= "/");
        }
        foreach $file ( sort readdir(D) ) {
            next if ( $file  =~ /^\.\.?$/ );
            $p = $file;
            ($file =~ /$match/) && (push @files, $p);
            if ( $descend && -d $p && ! -l $p ) {
                push @files, &findFiles($p,$match,$descend);
            }
        }
        closedir(D);
    }
    return @files;
}

######################################################################
# Syntax:  loadSyncProfile()
#
# Purpose: Locates the sync.profile.
# Returns: Hashmap of module name -> directory.
######################################################################
sub loadSyncProfile {
    my ($srcbase, $outbase) = @_;
    if ($verbose_level) {
        print("<srcbase> = $$srcbase \n");
        print("<outbase> = $$outbase \n");
    }

    my $syncprofile = "$$srcbase/sync.profile";
    my $result;
    unless ($result = do "$syncprofile") {
        die "syncqt couldn't parse $syncprofile: $@" if $@;
        die "syncqt couldn't execute $syncprofile: $!" unless defined $result;
    }
    return $result;
}

sub locateSyncProfile
{
    my ($directory) = @_;
    my $syncprofile;
    $directory = abs_path($directory);
    while(!defined $syncprofile) {
        local(*D);
        if (opendir(D, $directory)) {
            foreach my $file (sort readdir(D)) {
                next if ($file =~ /^\.\.?$/);
                $syncprofile = "$directory/$file" if ($file =~ /^sync\.profile$/);
                last if (defined $syncprofile);
            }
            closedir(D);
        }
        last if (defined $syncprofile || $directory eq "/" || $directory =~ /^?:[\/\\]$/);
        $directory = dirname($directory);
    }
    return $syncprofile;
}

# check if this is an in-source build, and if so use that as the basedir too
$basedir = locateSyncProfile($out_basedir);
if ($basedir) {
    $basedir = dirname($basedir) ;
    $basedir =~ s=\\=/=g;
    $quoted_basedir = "\Q$basedir";
}

# --------------------------------------------------------------------
# "main" function
# --------------------------------------------------------------------

while ( @ARGV ) {
    my $var = 0;
    my $val = 0;

    #parse
    my $arg = shift @ARGV;
    if ($arg eq "-h" || $arg eq "-help" || $arg eq "-?" || $arg eq "?") {
        $var = "show_help";
        $val = "yes";
    } elsif($arg eq "-copy") {
        $var = "copy";
        $val = "yes";
    } elsif($arg eq "-o" || $arg eq "-outdir") {
        $var = "output";
        $val = shift @ARGV;
    } elsif($arg eq "-showonly" || $arg eq "-remove-stale" || $arg eq "-windows" ||
            $arg eq "-relative" || $arg eq "-check-includes") {
        $var = substr($arg, 1);
        $val = "yes";
    } elsif($arg eq "-module-fwd") {
        $var = "module_fwd";
        $val = shift @ARGV;
    } elsif($arg eq "-cache-module-fwd") {
        $var = "cache_module_fwd";
        $val = "yes";
    } elsif($arg eq "-developer-build") {
        $var = "developer_build";
        $val = "yes";
    } elsif($arg eq "-no-module-version-header") {
        $var = "no_module_version_header";
        $val = "yes";
    } elsif($arg =~ /^-no-(.*)$/) {
        $var = $1;
        $val = "no";
        #these are for commandline compat
    } elsif($arg eq "-inc") {
        $var = "output";
        $val = shift @ARGV;
    } elsif($arg eq "-module") {
        $var = "module";
        $val = shift @ARGV;
    } elsif($arg eq "-separate-module") {
        $var = "separate-module";
        $val = shift @ARGV;
    } elsif($arg eq "-show") {
        $var = "showonly";
        $val = "yes";
    } elsif($arg eq "-quiet") {
        $var = "verbose";
        $val = "0";
    } elsif($arg eq "-v") {
        $var = "verbose";
        $val = "yes";
    } elsif($arg eq "-verbose") {
        $var = "verbose";
        $val = shift @ARGV;
    } elsif($arg eq "-private") {
        $var = "create_private_headers";
        $val = "yes";
    } elsif($arg eq "-qtdir") {
        $var = "qtdir";
        $val = shift @ARGV;
    } elsif($arg eq "-base-dir") {
        # skip, it's been dealt with at the top of the file
        shift @ARGV;
        next;
    } elsif($arg eq "-generator") {
        $var = "makefile_generator";
        $val = shift @ARGV;
    } elsif($arg =~/^-/) {
        print "Unknown option: $arg\n\n" if(!$var);
        showUsage();
    } else {
        $basedir = locateSyncProfile($arg);
        die "Could not find a sync.profile for '$arg'\n" if (!$basedir);
        $basedir = dirname($basedir);
        $basedir =~ s=\\=/=g;
        $quoted_basedir = "\Q$basedir";
        $var = "ignore";
    }

    #do something
    if(!$var || $var eq "show_help") {
        print "Unknown option: $arg\n\n" if(!$var);
        showUsage();
    } elsif ($var eq "copy") {
        if($val eq "yes") {
            $copy_headers++;
        } elsif($showonly) {
            $copy_headers--;
        }
    } elsif ($var eq "showonly") {
        if($val eq "yes") {
            $showonly++;
        } elsif($showonly) {
            $showonly--;
        }
    } elsif ($var eq "verbose") {
        if($val eq "yes") {
            $verbose_level++;
        } elsif($val eq "no" && $verbose_level) {
            $verbose_level--;
        } else {
            $verbose_level = int($val);
        }
    } elsif ($var eq "check-includes") {
        if($val eq "yes") {
            $check_includes++;
        } elsif($check_includes) {
            $check_includes--;
        }
    } elsif ($var eq "remove-stale") {
        if($val eq "yes") {
            $remove_stale++;
        } elsif($remove_stale) {
            $remove_stale--;
        }
    } elsif ($var eq "windows") {
        if($val eq "yes") {
            $force_win++;
        } elsif($force_win) {
            $force_win--;
        }
    } elsif ($var eq "relative") {
        if($val eq "yes") {
            $force_relative++;
        } elsif($force_relative) {
            $force_relative--;
        }
    } elsif ($var eq "module") {
        print "module :$val:\n" if($verbose_level);
        die "No such module: $val" unless(defined $modules{$val});
        push @modules_to_sync, $val;
    } elsif ($var eq "separate-module") {
        my ($module, $prodir, $headerdir) = split(/:/, $val);
        $modules{$module} = $prodir;
        push @modules_to_sync, $module;
        $moduleheaders{$module} = $headerdir;
        $create_uic_class_map = 0;
    } elsif ($var eq "qtdir") {
        if($val) {
            $qtbasedir = $val;
            $qtbasedir =~ s=\\=/=g;
        } else {
            die "The -qtdir option requires an argument";
        }
    } elsif ($var eq "module_fwd") {
        $module_fwd = $val;
    } elsif ($var eq "cache_module_fwd") {
        $cache_module_fwd = 1;
    } elsif ($var eq "developer_build") {
        $developer_build = 1;
    } elsif ($var eq "makefile_generator") {
            $makefile_generator = $val;
    } elsif ($var eq "no_module_version_header") {
            $no_module_version_header = 1;
    } elsif ($var eq "output") {
        my $outdir = $val;
        if(checkRelative($outdir)) {
            $out_basedir = getcwd();
            chomp $out_basedir;
            $out_basedir .= "/" . $outdir;
        } else {
            $out_basedir = $outdir;
        }
        # \ -> /
        $out_basedir =~ s=\\=/=g;
    }
}

# if the $qtbasedir neither has 'qtbase' somewhere in its path, nor a
# '.qmake.cache' file in its directory, we assume it's not a valid path
# (remember that a yet-to-be-built qtbase doesn't have this file either,
# thus the 'qtbase' path check!)
die "Cannot automatically detect/use provided path to QtBase's build directory!\n" .
    "QTDIR detected/provided: " . (defined $qtbasedir ? $qtbasedir : "-none-") . "\n" .
    "Please -qtdir option to provide the correct path.\nsyncqt failed"
        if (!$qtbasedir || !-d "$qtbasedir/mkspecs");

# if we have no $basedir we cannot be sure which sources you want, so die
die "Could not find any sync.profile for your module!\nPass <module directory> to syncqt to sync your header files.\nsyncqt failed" if (!$basedir);

my $class_lib_map_contents = "";
our @ignore_headers = ();
our @ignore_for_master_contents = ();
our @ignore_for_include_check = ();
our @ignore_for_qt_begin_header_check = ();
our @ignore_for_qt_begin_namespace_check = ();
our @ignore_for_qt_module_check = ();
my %colliding_headers = ();
my %inject_headers = ( "$basedir/src/corelib/global" => ( "qconfig.h" ) ); # all from build dir

# load the module's sync.profile here, before we can
loadSyncProfile(\$basedir, \$out_basedir);

@modules_to_sync = keys(%modules) if($#modules_to_sync == -1);

my %allmoduleheadersprivate = map { $_ => 1 } @allmoduleheadersprivate;

$isunix = checkUnix; #cache checkUnix

foreach my $lib (@modules_to_sync) {
    #iteration info
    my $dir = $modules{$lib};
    my $module_version = "";
    my $module_major_version = 0;
    my $module_minor_version = 0;
    my $module_patch_version = 0;

    if (-e "$modulepris{$lib}") {
        my $content = fileContents($modulepris{$lib});
        my @version_rows = grep(/QT\..*\.VERSION/, split('\n', $content));
        if(@version_rows) {
            # We only pick the first one, since each module need a separate .pri file
            $module_version = $version_rows[0];
            chomp $module_version;
            $module_version =~ s/^\s*QT\..*\.VERSION\s*=\s*([^#]+).*$/$1/;
            $module_version =~ s/\s+$//;
            my @versions = split(/\./, $module_version);
            $module_major_version = int($versions[0]);
            chomp $module_major_version;
            $module_minor_version = int($versions[1]);
            chomp $module_minor_version;
            $module_patch_version = int($versions[2]);
            chomp $module_patch_version;
        }
    }
    print "$lib: WARNING: Module\'s pri missing QT.<module>.VERSION variable! Private headers not versioned!\n" if (!$module_version);

    my $pathtoheaders = "";
    $pathtoheaders = $moduleheaders{$lib} if ($moduleheaders{$lib});

    my $allheadersprivate = 0;
    $allheadersprivate = 1 if $allmoduleheadersprivate{$lib};

    #information used after the syncing
    my $pri_install_classes = "";
    my $pri_install_files = "";
    my $pri_install_pfiles = "";

    my $libcapitals = $lib;
    $libcapitals =~ y/a-z/A-Z/;
    my $master_contents = "#ifndef QT_".$libcapitals."_MODULE_H\n#define QT_".$libcapitals."_MODULE_H\n";

    #get dependencies
    if(-e "$dir/" . basename($dir) . ".pro") {
        if(open(F, "<$dir/" . basename($dir) . ".pro")) {
            while(my $line = <F>) {
                chomp $line;
                if($line =~ /^ *QT *\+?= *([^\r\n]*)/) {
                    foreach(split(/ /, $1)) {
                        $_ =~ s/-private$//;
                        my $content = $mastercontent{$_};
                        $master_contents .= $content if ($content);
                    }
                }
            }
            close(F);
        }
    }

    #remove the old files
    if($remove_stale) {
        my @subdirs = ("$out_basedir/include/$lib");
        foreach my $subdir (@subdirs) {
            if (opendir DIR, $subdir) {
                foreach my $t (sort readdir(DIR)) {
                    my $file = "$subdir/$t";
                    if(-d $file) {
                        push @subdirs, $file unless($t eq "." || $t eq "..");
                    } else {
                        my @files = ($file);
                        #push @files, "$out_basedir/include/Qt/$t" if(-e "$out_basedir/include/Qt/$t");
                        foreach my $file (@files) {
                           my $remove_file = 0;
                           if(open(F, "<$file")) {
                                while(my $line = <F>) {
                                    chomp $line;
                                    if($line =~ /^\#include \"([^\"]*)\"$/) {
                                        my $include = $1;
                                        $include = $subdir . "/" . $include unless(substr($include, 0, 1) eq "/");
                                        $remove_file = 1 unless(-e $include);
                                    } else {
                                        $remove_file = 0;
                                        last;
                                    }
                                }
                                close(F);
                                unlink $file if($remove_file);
                            }
                        }
                    }
                }
                closedir DIR;
            }

        }
    }

    # create the version header files for each module
    unless ($no_module_version_header) {
        my $modulepri = $modulepris{$lib};
        if (-e $modulepri) {
            my $modulepriname = basename($modulepri);
            # FIXME: this creates a file in the source location for shadow-builds
            my $moduleversionheader = "$modules{$lib}/" . lc($lib) . "version.h";
            my $modulehexstring = sprintf("0x%02X%02X%02X", $module_major_version, $module_minor_version, $module_patch_version);
            open MODULE_VERSION_HEADER_FILE, ">$moduleversionheader" or die "Can't open $moduleversionheader for writing";
            print MODULE_VERSION_HEADER_FILE "/* This file was generated by syncqt with the info from sync.profile. */\n";
            print MODULE_VERSION_HEADER_FILE "#ifndef QT_". uc($lib) . "_VERSION_H\n";
            print MODULE_VERSION_HEADER_FILE "#define QT_". uc($lib) . "_VERSION_H\n";
            print MODULE_VERSION_HEADER_FILE "\n";
            print MODULE_VERSION_HEADER_FILE "#define " .uc($lib) . "_VERSION_STR \"" . $module_version . "\"\n";
            print MODULE_VERSION_HEADER_FILE "\n";
            print MODULE_VERSION_HEADER_FILE "#define " .uc($lib) . "_VERSION $modulehexstring\n", ;
            print MODULE_VERSION_HEADER_FILE "\n";
            print MODULE_VERSION_HEADER_FILE "#endif // QT_". uc($lib) . "_VERSION_H\n";
            close MODULE_VERSION_HEADER_FILE;
            $moduleversionheader = "<srcbase>" . substr($moduleversionheader, length($basedir)) if ($verbose_level < 2);
            print "$lib: created version header $moduleversionheader\n" if($verbose_level);
        } elsif ($modulepri) {
            print "$lib: WARNING: Module\'s pri file '$modulepri' not found.\n$lib: Skipped creating module version header.\n";
        }
    }

    #create the new ones
    foreach my $current_dir (split(/;/, $dir)) {
        my @headers_paths = split(/;/, $pathtoheaders);
        if (@headers_paths) {
            @headers_paths = map { "$current_dir/$_" } @headers_paths;
        } else {
            push @headers_paths, $current_dir;
        }

        foreach my $headers_dir (@headers_paths) {
            #calc subdirs
            my @subdirs = ($headers_dir);
            foreach my $subdir (@subdirs) {
                opendir DIR, $subdir or next;
                foreach my $t (sort readdir(DIR)) {
                    push @subdirs, "$subdir/$t" if(-d "$subdir/$t" && !($t eq ".") &&
                                                   !($t eq "..") && !($t eq ".obj") &&
                                                   !($t eq ".moc") && !($t eq ".rcc") &&
                                                   !($t eq ".uic") && !($t eq "build"));
                }
                closedir DIR;
            }

            #calc files and "copy" them
            foreach my $subdir (@subdirs) {
                my @headers = findFiles($subdir, "^[-a-z0-9_]*\\.h\$" , 0);
                if (defined $inject_headers{$subdir}) {
                    foreach my $if ($inject_headers{$subdir}) {
                        @headers = grep(!/^\Q$if\E$/, @headers); #in case we configure'd previously
                        push @headers, "*".$if;
                    }
                }
                my $header_dirname = "";
                foreach my $header (@headers) {
                    my $shadow = ($header =~ s/^\*//);
                    $header = 0 if($header =~ /^ui_.*.h/);
                    foreach (@ignore_headers) {
                        $header = 0 if($header eq $_);
                    }
                    if($header) {
                        my $header_copies = 0;
                        #figure out if it is a public header
                        my $public_header = $header;
                        if($allheadersprivate || $public_header =~ /_p.h$/ || $public_header =~ /_pch.h$/) {
                            $public_header = 0;
                        } else {
                            foreach (@ignore_for_master_contents) {
                                $public_header = 0 if($header eq $_);
                            }
                        }

                        my $iheader = $subdir . "/" . $header;
                        $iheader =~ s/^\Q$basedir\E/$out_basedir/ if ($shadow);
                        my @classes = $public_header ? classNames($iheader) : ();
                        if($showonly) {
                            print "$header [$lib]\n";
                            foreach(@classes) {
                                print "SYMBOL: $_\n";
                            }
                        } else {
                            my $ts = (stat($iheader))[9];
                            #find out all the places it goes..
                            my @headers;
                            if ($public_header) {
                                @headers = ( "$out_basedir/include/$lib/$header" );
                                foreach my $full_class (@classes) {
                                    my $header_base = basename($header);
                                    # Strip namespaces:
                                    my $class = $full_class;
                                    $class =~ s/^.*:://;
    #                               if ($class =~ m/::/) {
    #                                  class =~ s,::,/,g;
    #                               }

                                    if (defined $explicitheaders{$lib}{$class}) {
                                        $header_copies++ if(syncHeader($lib, "$out_basedir/include/$lib/$class", "$out_basedir/include/$lib/$explicitheaders{$lib}{$class}", 0, $ts));
                                    } else {
                                        $class_lib_map_contents .= "QT_CLASS_LIB($full_class, $lib, $header_base)\n";
                                        $header_copies++ if(syncHeader($lib, "$out_basedir/include/$lib/$class", "$out_basedir/include/$lib/$header", 0, $ts));
                                    }

                                    # KDE-Compat headers for Phonon
                                    if ($lib eq "phonon") {
                                        $header_copies++ if (syncHeader($lib, "$out_basedir/include/phonon_compat/Phonon/$class", "$out_basedir/include/$lib/$header", 0, $ts));
                                    }
                                }

                                if ($explicitheaders{$lib}{basename($header)}) {
                                    $header_copies++ if(syncHeader($lib, "$out_basedir/include/$lib/$explicitheaders{$lib}{basename($header)}", "$out_basedir/include/$lib/$header", 0, $ts));
                                }

                            } elsif ($create_private_headers) {
                                if ($module_version) {
                                    @headers = ( "$out_basedir/include/$lib/$module_version/$lib/private/$header" );
                                } else {
                                    @headers = ( "$out_basedir/include/$lib/private/$header" );
                                }
                            }
                            foreach(@headers) { #sync them
                                $header_copies++ if(syncHeader($lib, $_, $iheader, $copy_headers && !$shadow, $ts));
                            }

                            if($public_header) {
                                #put it into the master file
                                $master_contents .= "#include \"$public_header\"\n" if(shouldMasterInclude($iheader));

                                #deal with the install directives
                                if($public_header) {
                                    my $pri_install_iheader = fixPaths($iheader, $current_dir);
                                    foreach my $class (@classes) {
                                        # Strip namespaces:
                                        $class =~ s/^.*:://;
    #                                   if ($class =~ m/::/) {
    #                                       $class =~ s,::,/,g;
    #                                   }
                                        my $class_header = fixPaths("$out_basedir/include/$lib/$class",
                                                                    $current_dir) . " ";
                                        $pri_install_classes .= $class_header
                                                                    unless($pri_install_classes =~ $class_header);
                                    }
                                    if ($explicitheaders{$lib}{basename($iheader)}) {
                                        my $compat_header = fixPaths("$out_basedir/include/$lib/$explicitheaders{$lib}{basename($iheader)}", $current_dir) . " ";
                                        $pri_install_files .= $compat_header unless($pri_install_files =~ $compat_header);
                                    }
                                    $pri_install_files.= "$pri_install_iheader ";;
                                }
                            }
                            else {
                                my $pri_install_iheader = fixPaths($iheader, $current_dir);
                                $pri_install_pfiles.= "$pri_install_iheader ";;
                            }
                        }

                        if ($verbose_level && $header_copies) {
                            my $new_header_dirname = dirname($iheader);
                            $new_header_dirname = "<srcbase>" . substr($new_header_dirname, length($basedir)) if ($new_header_dirname && $verbose_level < 2);
                            my $header_base = basename($iheader);
                            if ($verbose_level < 3) {
                                my $line_prefix = ",";
                                if ($new_header_dirname ne $header_dirname) {
                                    $line_prefix = "$lib: created fwd-include header(s) for $new_header_dirname/ {";
                                    $line_prefix = " }\n".$line_prefix if ($header_dirname);
                                    $header_dirname = $new_header_dirname;
                                } else {
                                    $line_prefix = ",";
                                }
                                print "$line_prefix $header_base ($header_copies)";
                            } else { # $verbose_level >= 3
                                $iheader = "<srcbase>" . substr($iheader, length($basedir)) if ($verbose_level == 3);
                                print "$lib: created $header_copies fwd-include headers for $iheader\n";
                            }
                        }
                    }
                }
                print " }\n" if ($header_dirname && $verbose_level > 0 && $verbose_level < 3);
            }
        }
    }

    # close the master include:
    $master_contents .= "#endif\n";

    unless($showonly) {
        # create deprecated headers
        my $first = 1;
        while (my ($header, $include) = each %{$deprecatedheaders{$lib}}) {
            my $public_header = 0;
            $public_header = 1 unless ($allheadersprivate || ($header =~ /_p\.h$/));
            next unless ($public_header || $create_private_headers);

            my $header_path = "$out_basedir/include/$lib/";
            unless ($public_header) {
                if ($module_version) {
                    $header_path .= "$module_version/$lib/private/";
                } else {
                    $header_path .= "private/";
                }
            }
            $header_path .= "$header";

            unless (-e $header_path) {
                my $guard = "DEPRECATED_HEADER_" . $lib . "_" . $header;
                $guard =~ s/([^a-zA-Z0-9_])/_/g;

                open HEADER, ">$header_path" || die "Could not open $header_path for writing!\n";
                print HEADER "#ifndef $guard\n";
                print HEADER "#define $guard\n";
                my $warning = "Header <$lib/";
                $warning .= "private/" unless ($public_header);
                $warning .= "$header> is deprecated. Please include <$include> instead.";
                print HEADER "#warning $warning\n";
                print HEADER "#include <$include>\n";
                if ($public_header) {
                    print HEADER "#if 0\n";
                    print HEADER "#pragma qt_no_master_include\n";
                    print HEADER "#endif\n";
                }
                print HEADER "#endif\n";
                close HEADER;

                if ($verbose_level < 3) {
                    my $line_prefix = ",";
                    $line_prefix = "$lib: created deprecated header(s) {" if ($first);
                    print "$line_prefix $header";
                } else {
                    print "$lib: created deprecated header $header => $include\n";
                }

                my $addendum = fixPaths($header_path, $dir) . " ";
                if ($public_header) {
                    $pri_install_files .=  $addendum;
                } else {
                    $pri_install_pfiles .=  $addendum;
                }
                $first = 0;
            }
        }
        if ($verbose_level < 3) {
            print " }\n" unless ($first);
        }

        my @master_includes;
        push @master_includes, "$out_basedir/include/$lib/$lib";
        push @master_includes, "$out_basedir/include/phonon_compat/Phonon/Phonon" if ($lib eq "phonon");
        foreach my $master_include (@master_includes) {
            #generate the "master" include file
            my @tmp = split(/;/,$modules{$lib});
            $pri_install_files .= fixPaths($master_include, $tmp[0]) . " "; #get the master file installed too
            if($master_include && -e $master_include) {
                open MASTERINCLUDE, "<$master_include";
                local $/;
                binmode MASTERINCLUDE;
                my $oldmaster = <MASTERINCLUDE>;
                close MASTERINCLUDE;
                $oldmaster =~ s/\r//g; # remove \r's , so comparison is ok on all platforms
                $master_include = 0 if($oldmaster eq $master_contents);
            }
            if($master_include && $master_contents) {
                my $master_dir = dirname($master_include);
                make_path($master_dir, $lib, $verbose_level);
                open MASTERINCLUDE, ">$master_include";
                print MASTERINCLUDE $master_contents;
                close MASTERINCLUDE;
                print "$lib: created header (master) file\n" if($verbose_level);
            }
        }

        #handle the headers.pri for each module
        my $headers_pri_contents = "";
        $headers_pri_contents .= "SYNCQT.HEADER_FILES = $pri_install_files\n";
        $headers_pri_contents .= "SYNCQT.HEADER_CLASSES = $pri_install_classes\n";
        $headers_pri_contents .= "SYNCQT.PRIVATE_HEADER_FILES = $pri_install_pfiles\n";
        my $headers_pri_file = "$out_basedir/include/$lib/headers.pri";
        if(-e $headers_pri_file) {
            open HEADERS_PRI_FILE, "<$headers_pri_file";
            local $/;
            binmode HEADERS_PRI_FILE;
            my $old_headers_pri_contents = <HEADERS_PRI_FILE>;
            close HEADERS_PRI_FILE;
            $old_headers_pri_contents =~ s/\r//g; # remove \r's , so comparison is ok on all platforms
            $headers_pri_file = 0 if($old_headers_pri_contents eq $headers_pri_contents);
        }
        if($headers_pri_file && $master_contents) {
            my $headers_pri_dir = dirname($headers_pri_file);
            make_path($headers_pri_dir, $lib, $verbose_level);
            open HEADERS_PRI_FILE, ">$headers_pri_file";
            print HEADERS_PRI_FILE $headers_pri_contents;
            close HEADERS_PRI_FILE;
            print "$lib: created headers.pri file\n" if($verbose_level);
        }

        # create forwarding module pri in qtbase/mkspecs/modules
        if ($module_fwd) {
            my $modulepri = $modulepris{$lib};
            if (-e $modulepri) {
                my $modulepriname = basename($modulepri);
                make_path($module_fwd, $lib, $verbose_level);
                my $moduleprifwd = "$module_fwd/$modulepriname";
                my $mod_base = $developer_build ? $basedir : $out_basedir;
                my $mod_component_base = $developer_build ? $qtbasedir : $out_basedir;
                open MODULE_PRI_FILE, ">$moduleprifwd" or die("Could not open $moduleprifwd for writing");
                print MODULE_PRI_FILE "QT_MODULE_BASE = $mod_base\n";
                print MODULE_PRI_FILE "QT_MODULE_BIN_BASE = $mod_component_base/bin\n";
                print MODULE_PRI_FILE "QT_MODULE_INCLUDE_BASE = $out_basedir/include\n";
                print MODULE_PRI_FILE "QT_MODULE_IMPORT_BASE = $mod_component_base/imports\n";
                print MODULE_PRI_FILE "QT_MODULE_LIB_BASE = $mod_component_base/lib\n";
                print MODULE_PRI_FILE "QT_MODULE_PLUGIN_BASE = $mod_component_base/plugins\n";
                print MODULE_PRI_FILE "include($modulepri)\n";
                close MODULE_PRI_FILE;
                utime(time, (stat($modulepri))[9], $moduleprifwd);
                if ($cache_module_fwd) {
                    my $cacheStatement = "QMAKE_EXTRA_MODULE_FORWARDS = \"$module_fwd\"";
                    my $cacheFile = "$out_basedir/.qmake.cache";
                    my $existingQmakeCache = fileContents($cacheFile);
                    # Skip if it's already there.
                    if ($existingQmakeCache !~ $cacheStatement) {
                        open QMAKE_CACHE_FILE, ">>$cacheFile" or die("Could not open $cacheFile for writing");
                        print QMAKE_CACHE_FILE "$cacheStatement\n";
                        close(QMAKE_CACHE_FILE);
                    }
                }
            } elsif ($modulepri) {
                print "$lib: WARNING: Module\'s pri file '$modulepri' not found.\n$lib: Skipped creating forwarding pri.\n";
            }
        }
    }
}
unless($showonly || !$create_uic_class_map) {
    my $class_lib_map = "$out_basedir/src/tools/uic/qclass_lib_map.h";
    if(-e $class_lib_map) {
        open CLASS_LIB_MAP, "<$class_lib_map";
        local $/;
        binmode CLASS_LIB_MAP;
        my $old_class_lib_map_contents = <CLASS_LIB_MAP>;
        close CLASS_LIB_MAP;
        $old_class_lib_map_contents =~ s/\r//g; # remove \r's , so comparison is ok on all platforms
        $class_lib_map = 0 if($old_class_lib_map_contents eq $class_lib_map_contents);
    }
    if($class_lib_map) {
        my $class_lib_map_dir = dirname($class_lib_map);
        make_path($class_lib_map_dir, "<outdir>", $verbose_level);
        open CLASS_LIB_MAP, ">$class_lib_map";
        print CLASS_LIB_MAP $class_lib_map_contents;
        close CLASS_LIB_MAP;
    }
}

if($check_includes) {
    for my $lib (keys(%modules)) {
            #calc subdirs
            my @subdirs = ($modules{$lib});
            foreach my $subdir (@subdirs) {
                opendir DIR, $subdir or die "Huh, directory ".$subdir." cannot be opened.";
                foreach my $t (sort readdir(DIR)) {
                    push @subdirs, "$subdir/$t" if(-d "$subdir/$t" && !($t eq ".") &&
                                                   !($t eq "..") && !($t eq ".obj") &&
                                                   !($t eq ".moc") && !($t eq ".rcc") &&
                                                   !($t eq ".uic") && !($t eq "build"));
                }
                closedir DIR;
            }

            foreach my $subdir (@subdirs) {
                my $header_skip_qt_module_test = 0;
                foreach(@ignore_for_qt_module_check) {
                    foreach (split(/;/, $_)) {
                        $header_skip_qt_module_test = 1 if ($subdir =~ /^$_/);
                    }
                }
                my @headers = findFiles($subdir, "^[-a-z0-9_]*\\.h\$" , 0);
                foreach my $header (@headers) {
                    my $header_skip_qt_begin_header_test = 0;
                    my $header_skip_qt_begin_namespace_test = 0;
                    $header = 0 if($header =~ /^ui_.*.h/);
                    foreach (@ignore_headers) {
                        $header = 0 if($header eq $_);
                    }
                    if($header) {
                        my $public_header = $header;
                        if($public_header =~ /_p.h$/ || $public_header =~ /_pch.h$/) {
                            $public_header = 0;
                        } else {
                            foreach (@ignore_for_master_contents) {
                                $public_header = 0 if($header eq $_);
                            }
                            if($public_header) {
                                foreach (@ignore_for_include_check) {
                                    $public_header = 0 if($header eq $_);
                                }
                                foreach(@ignore_for_qt_begin_header_check) {
                                    $header_skip_qt_begin_header_test = 1 if ($header eq $_);
                                }
                                foreach(@ignore_for_qt_begin_namespace_check) {
                                    $header_skip_qt_begin_namespace_test = 1 if ($header eq $_);
                                }
                            }
                        }

                        my $iheader = $subdir . "/" . $header;
                        if($public_header) {
                            if(open(F, "<$iheader")) {
                                my $qt_module_found = 0;
                                my $qt_begin_header_found = 0;
                                my $qt_end_header_found = 0;
                                my $qt_begin_namespace_found = 0;
                                my $qt_end_namespace_found = 0;
                                my $line;
                                while($line = <F>) {
                                    chomp $line;
                                    my $output_line = 1;
                                    if($line =~ /^ *\# *pragma (qt_no_included_check|qt_sync_stop_processing)/) {
                                        last;
                                    } elsif($line =~ /^ *\# *include/) {
                                        my $include = $line;
                                        if($line =~ /<.*>/) {
                                            $include =~ s,.*<(.*)>.*,$1,;
                                        } elsif($line =~ /".*"/) {
                                            $include =~ s,.*"(.*)".*,$1,;
                                        } else {
                                            $include = 0;
                                        }
                                        if($include) {
                                            for my $trylib (keys(%modules)) {
                                                if(-e "$out_basedir/include/$trylib/$include") {
                                                    print "$lib: WARNING: $iheader includes $include when it should include $trylib/$include\n";
                                                }
                                            }
                                        }
                                    } elsif ($header_skip_qt_begin_header_test == 0 and $line =~ /^QT_BEGIN_HEADER\s*$/) {
                                        $qt_begin_header_found = 1;
                                    } elsif ($header_skip_qt_begin_header_test == 0 and $line =~ /^QT_END_HEADER\s*$/) {
                                        $qt_end_header_found = 1;
                                    } elsif ($header_skip_qt_begin_namespace_test == 0 and $line =~ /^QT_BEGIN_NAMESPACE\s*$/) {
                                        $qt_begin_namespace_found = 1;
                                    } elsif ($header_skip_qt_begin_namespace_test == 0 and $line =~ /^QT_END_NAMESPACE\s*$/) {
                                        $qt_end_namespace_found = 1;
                                    } elsif ($header_skip_qt_module_test == 0 and $line =~ /^QT_MODULE\(.*\)\s*$/) {
                                        $qt_module_found = 1;
                                    }
                                }
                                if ($header_skip_qt_begin_header_test == 0) {
                                    if ($qt_begin_header_found == 0) {
                                        print "$lib: WARNING: $iheader does not include QT_BEGIN_HEADER\n";
                                    }

                                    if ($qt_begin_header_found && $qt_end_header_found == 0) {
                                        print "$lib: WARNING: $iheader has QT_BEGIN_HEADER but no QT_END_HEADER\n";
                                    }
                                }

                                if ($header_skip_qt_begin_namespace_test == 0) {
                                    if ($qt_begin_namespace_found == 0) {
                                        print "$lib: WARNING: $iheader does not include QT_BEGIN_NAMESPACE\n";
                                    }

                                    if ($qt_begin_namespace_found && $qt_end_namespace_found == 0) {
                                        print "$lib: WARNING: $iheader has QT_BEGIN_NAMESPACE but no QT_END_NAMESPACE\n";
                                    }
                                }

                                if ($header_skip_qt_module_test == 0) {
                                    if ($qt_module_found == 0) {
                                        print "$lib: WARNING: $iheader does not include QT_MODULE\n";
                                    }
                                }
                                close(F);
                            }
                        }
                    }
                }
            }
    }
}

# Do configure tests now (pass some things along)
# fatal tests have a non zero return
# If the generator is not set (e.g. someone invoking syncqt as part of configure etc, then don't run tests either)
unless ($showonly || $makefile_generator eq '') {
    my $configtests = dirname($0)."/qtmodule-configtests";
    if (! -f $configtests) {
        $configtests = $qtbasedir."/bin/qtmodule-configtests";
    }
    if (! -f $configtests) {
        warn "Unable to locate qtmodule-configtests script - config tests disabled.\n";
    } else {
        if (system($EXECUTABLE_NAME, $configtests, $basedir, $out_basedir, $qtbasedir, $makefile_generator)) {
            die "$configtests exited with status $?";
        }
    }
}

exit 0;