diff --git a/config_help.txt b/config_help.txt new file mode 100644 index 0000000000..971e932657 --- /dev/null +++ b/config_help.txt @@ -0,0 +1,433 @@ +Usage: configure [options] + +Installation options: + + These are optional, but you may specify install directories. + + -prefix ...... The deployment directory, as seen on the target device. + (default /usr/local/Qt-$QT_VERSION, $PWD if -developer-build is active) + + -extprefix ... The installation directory, as seen on the host machine. + (default SYSROOT/PREFIX) + + -hostprefix [dir] .. The installation directory for build tools running on the + host machine. If [dir] is not given, the current build + directory will be used. (default EXTPREFIX) + + You may use these to change the layout of the install. Note that all directories + except -sysconfdir should be located under -prefix/-hostprefix: + + -bindir ......... User executables will be installed to + (default PREFIX/bin) + -headerdir ...... Headers will be installed to + (default PREFIX/include) + -libdir ......... Libraries will be installed to + (default PREFIX/lib) + -archdatadir .... Arch-dependent data used by Qt will be installed to + (default PREFIX) + -plugindir ...... Plugins will be installed to + (default ARCHDATADIR/plugins) + -libexecdir ..... Program executables will be installed to + (default ARCHDATADIR/libexec, ARCHDATADIR/bin for MinGW) + -importdir ...... Imports for QML1 will be installed to + (default ARCHDATADIR/imports) + -qmldir ......... Imports for QML2 will be installed to + (default ARCHDATADIR/qml) + -datadir ........ Arch-independent data used by Qt will be installed to + (default PREFIX) + -docdir ......... Documentation will be installed to + (default DATADIR/doc) + -translationdir . Translations of Qt programs will be installed to + (default DATADIR/translations) + -sysconfdir ..... Settings used by Qt programs will be looked for in + (default PREFIX/etc/xdg) + -examplesdir .... Examples will be installed to + (default PREFIX/examples) + -testsdir ....... Tests will be installed to + (default PREFIX/tests) + + -hostbindir ..... Host executables will be installed to + (default HOSTPREFIX/bin) + -hostlibdir ..... Host libraries will be installed to + (default HOSTPREFIX/lib) + -hostdatadir .... Data used by qmake will be installed to + (default HOSTPREFIX) + +Configure options: + + The defaults (*) are usually acceptable. A plus (+) denotes a default value + that needs to be evaluated. If the evaluation succeeds, the feature is + included. Here is a short explanation of each option: + + * -release ............. Compile and link Qt with debugging turned off. + -debug ............... Compile and link Qt with debugging turned on. + -debug-and-release ... Compile and link two versions of Qt, with and without + debugging turned on (Apple platforms only). + + -force-debug-info .... Create symbol files for release builds. + + -developer-build ..... Compile and link Qt with Qt developer options (including auto-tests exporting) + + * -no-optimized-tools .. Do not build optimized host tools even in debug build. + -optimized-tools ..... Build optimized host tools even in debug build. + + -opensource .......... Compile and link the Open-Source Edition of Qt. + -commercial .......... Compile and link the Commercial Edition of Qt. + + -confirm-license ..... Automatically acknowledge the license (use with + either -opensource or -commercial) + + -c++std .... Compile Qt with C++ standard edition (c++11, c++14, c++1z) + Default: highest supported + + * -shared .............. Create and use shared Qt libraries. + -static .............. Create and use static Qt libraries. + + -no-accessibility .... Do not compile Accessibility support. + Disabling accessibility is not recommended, as it will break QStyle + and may break other internal parts of Qt. + With this switch you create a source incompatible version of Qt, + which is unsupported. + + -accessibility ....... Compile Accessibility support. + + -no-sql- ..... Disable SQL . + -sql- Enable SQL plugin. + + Possible values for : + [db2, ibase, mysql, oci, odbc, psql, sqlite, sqlite2, tds] + + -system-sqlite ....... Use sqlite from the operating system. + + -no-qml-debug ........ Do not build the in-process QML debugging support. + + -qml-debug ........... Build the QML debugging support. + + -platform target ..... The operating system and compiler you are building + on (default detected from host system). + + See the README file for a list of supported + operating systems and compilers. + + -no-sse2 ............. Do not compile with use of SSE2 instructions. + -no-sse3 ............. Do not compile with use of SSE3 instructions. + -no-ssse3 ............ Do not compile with use of SSSE3 instructions. + -no-sse4.1 ........... Do not compile with use of SSE4.1 instructions. + -no-sse4.2 ........... Do not compile with use of SSE4.2 instructions. + -no-avx .............. Do not compile with use of AVX instructions. + -no-avx2 ............. Do not compile with use of AVX2 instructions. + -no-avx512 ........... Do not compile with use of AVX512 instructions. + -no-mips_dsp ......... Do not compile with use of MIPS DSP instructions. + -no-mips_dspr2 ....... Do not compile with use of MIPS DSP rev2 instructions. + + -qtnamespace .. Wraps all Qt library code in 'namespace {...}'. + -qtlibinfix .. Renames all libQt*.so to libQt*.so. + + -testcocoon .......... Instrument Qt with the TestCocoon code coverage tool. + -gcov ................ Instrument Qt with the GCov code coverage tool. + + -D .......... Add an explicit define to the preprocessor. + -I .......... Add an explicit include path. + -L .......... Add an explicit library path. + + + -pkg-config .......... Use pkg-config to detect include and library paths. By default, + configure determines whether to use pkg-config or not with + some heuristics such as checking the environment variables. + -no-pkg-config ....... Disable use of pkg-config. + -force-pkg-config .... Force usage of pkg-config (skips pkg-config usability + detection heuristic). + + -help, -h ............ Display this information. + +Third Party Libraries: + + -qt-zlib ............. Use the zlib bundled with Qt. + + -system-zlib ......... Use zlib from the operating system. + See http://www.gzip.org/zlib + + -no-mtdev ............ Do not compile mtdev support. + + -mtdev ............... Enable mtdev support. + + + -no-journald ......... Do not send logging output to journald. + -journald ............ Send logging output to journald. + + + -no-syslog ........... Do not send logging output to syslog. + -syslog .............. Send logging output to syslog. + + -no-gif .............. Do not compile GIF reading support. + + -no-libpng ........... Do not compile PNG support. + -qt-libpng ........... Use the libpng bundled with Qt. + + -system-libpng ....... Use libpng from the operating system. + See http://www.libpng.org/pub/png + + -no-libjpeg .......... Do not compile JPEG support. + -qt-libjpeg .......... Use the libjpeg bundled with Qt. + + -system-libjpeg ...... Use libjpeg from the operating system. + See http://www.ijg.org + + -no-doubleconversion ..... Use sscanf_l and snprintf_l for (imprecise) double conversion. + -qt-doubleconversion ..... Use the libdouble-conversion bundled with Qt. + + -system-doubleconversion . Use the libdouble-conversion provided by the system. + See https://github.com/google/double-conversion + + -no-freetype ......... Do not compile in Freetype2 support. + -qt-freetype ......... Use the libfreetype bundled with Qt. + + -system-freetype...... Use the libfreetype provided by the system (enabled if -fontconfig is active). + See http://www.freetype.org + + -no-harfbuzz ......... Do not compile HarfBuzz-NG support. + -qt-harfbuzz ......... Use HarfBuzz-NG bundled with Qt to do text shaping. + It can still be disabled by setting + the QT_HARFBUZZ environment variable to "old". + + -system-harfbuzz ..... Use HarfBuzz-NG from the operating system + to do text shaping. It can still be disabled + by setting the QT_HARFBUZZ environment variable to "old". + See http://www.harfbuzz.org + + -no-openssl .......... Do not compile support for OpenSSL. + + -openssl ............. Enable run-time OpenSSL support. + -openssl-linked ...... Enabled linked OpenSSL support. + + -no-libproxy ......... Do not compile support for libproxy + + -libproxy ............ Use libproxy from the operating system. + + -qt-pcre ............. Use the PCRE library bundled with Qt. + + -system-pcre ......... Use the PCRE library from the operating system. + + -qt-xcb .............. Use xcb- libraries bundled with Qt. + (libxcb.so will still be used from operating system). + + -system-xcb .......... Use xcb- libraries from the operating system. + + -xkb-config-root ..... Set default XKB config root. This option is used only together with -qt-xkbcommon-x11. + -qt-xkbcommon-x11 .... Use the xkbcommon library bundled with Qt in combination with xcb. + + -system-xkbcommon-x11 Use the xkbcommon library from the operating system in combination with xcb. + + -no-xkbcommon-evdev .. Do not use X-less xkbcommon when compiling libinput support. + * -xkbcommon-evdev ..... Use X-less xkbcommon when compiling libinput support. + + -no-xinput2 .......... Do not compile XInput2 support. + * -xinput2 ............. Compile XInput2 support. + + -no-xcb-xlib.......... Do not compile Xcb-Xlib support. + * -xcb-xlib............. Compile Xcb-Xlib support. + + -no-glib ............. Do not compile Glib support. + + -glib ................ Compile Glib support. + + -no-pulseaudio ....... Do not compile PulseAudio support. + + -pulseaudio .......... Compile PulseAudio support. + + -no-alsa ............. Do not compile ALSA support. + + -alsa ................ Compile ALSA support. + + -no-gtk .............. Do not compile GTK platform theme support. + + -gtk ................. Compile GTK platform theme support. + +Additional options: + + -make ......... Add part to the list of parts to be built at make time. + (defaults to: libs tools examples) + -nomake ....... Exclude part from the list of parts to be built. + + -skip ....... Exclude an entire module from the build. + + -no-compile-examples . Install only the sources of examples. + + -no-gui .............. Don't build the Qt GUI module and dependencies. + + -gui ................. Build the Qt GUI module and dependencies. + + -no-widgets .......... Don't build the Qt Widgets module and dependencies. + + -widgets ............. Build the Qt Widgets module and dependencies. + + -R .......... Add an explicit runtime library path to the Qt + libraries. + -l .......... Add an explicit library. + + -no-rpath ............ Do not use the library install path as a runtime + library path. On Apple platforms, this implies using + absolute install names (based in -libdir) for dynamic + libraries and frameworks. + + -rpath ............... Link Qt libraries and executables using the library + install path as a runtime library path. Equivalent + to -R install_libpath + + -continue ............ Continue as far as possible if an error occurs. + + -verbose, -v ......... Print verbose information about each step of the + configure process. + + -silent .............. Reduce the build output so that warnings and errors + can be seen more easily. + + -no-nis .............. Do not compile NIS support. + * -nis ................. Compile NIS support. + + -no-cups ............. Do not compile CUPS support. + * -cups ................ Compile CUPS support. + Requires cups/cups.h and libcups.so.2. + + -no-iconv ............ Do not compile support for iconv(3). + * -iconv ............... Compile support for iconv(3). + + -no-evdev ............ Do not compile support for evdev. + * -evdev ............... Compile support for evdev. + + -no-tslib ............ Do not compile support for tslib. + * -tslib ............... Compile support for tslib. + + -no-icu .............. Do not compile support for ICU libraries. + + -icu ................. Compile support for ICU libraries. + + -no-fontconfig ....... Do not compile FontConfig support. + + -fontconfig .......... Compile FontConfig support. + + -no-strip ............ Do not strip binaries and libraries of unneeded symbols. + * -strip ............... Strip binaries and libraries of unneeded symbols when installing. + + * -no-pch .............. Do not use precompiled header support. + -pch ................. Use precompiled header support. + + * -no-ltcg Do not use Link Time Code Generation + -ltcg Use Link Time Code Generation. + + -no-dbus ............. Do not compile the Qt D-Bus module. + + -dbus-linked ......... Compile the Qt D-Bus module and link to libdbus-1. + -dbus-runtime ........ Compile the Qt D-Bus module and dynamically load libdbus-1. + + -reduce-relocations .. Reduce relocations in the libraries through extra + linker optimizations (Qt/X11 and Qt for Embedded Linux only; + experimental; needs GNU ld >= 2.18). + + -no-use-gold-linker .. Do not link using the GNU gold linker. + + -use-gold-linker ..... Link using the GNU gold linker if available. + + -force-asserts ....... Force Q_ASSERT to be enabled even in release builds. + + -sanitize [address|thread|memory|undefined] Enables the specified compiler sanitizer. + + -device ............... Cross-compile for device (experimental) + -device-option ... Add device specific options for the device mkspec + (experimental) + + -host-option ..... Add host specific options for the host mkspec + + * -no-separate-debug-info ...... Do not store debug information in a separate file. + -separate-debug-info ......... Strip debug information into a separate file. + + -no-xcb .............. Do not compile Xcb (X protocol C-language Binding) support. + * -xcb ................. Compile Xcb support. + + -no-eglfs ............ Do not compile EGLFS (EGL Full Screen/Single Surface) support. + * -eglfs ............... Compile EGLFS support. + + -no-kms .............. Do not compile backends for KMS. + * -kms ................. Compile backends for KMS. + + -no-gbm .............. Do not compile backends for GBM. + * -gbm ................. Compile backends for GBM. + + -no-directfb ......... Do not compile DirectFB support. + * -directfb ............ Compile DirectFB support. + + -no-linuxfb .......... Do not compile Linux Framebuffer support. + * -linuxfb ............. Compile Linux Framebuffer support. + + * -no-mirclient......... Do not compile Mir client support. + -mirclient............ Compile Mir client support. + + -qpa .......... Sets the default QPA platform (e.g xcb, cocoa, windows). + + -xplatform target .... The target platform when cross-compiling. + + -sysroot ....... Sets as the target compiler's and qmake's sysroot and also sets pkg-config paths. + -no-gcc-sysroot ...... When using -sysroot, it disables the passing of --sysroot to the compiler + + -external-hostbindir .. Path to Qt tools built for this machine. Use this when -platform + does not match the current system, i.e., to make a Canadian Cross Build. + + -no-feature- Do not compile in . + -feature- ... Compile in . The available features + are described in src/corelib/global/qfeatures.txt + + -qreal [double|float] typedef qreal to the specified type. The default is double. + Note that changing this flag affects binary compatibility. + + -no-opengl ........... Do not support OpenGL. + -opengl ........ Enable OpenGL support + With no parameter, this will attempt to auto-detect + OpenGL ES 2.0 and higher, or regular desktop OpenGL. + Use es2 for to override auto-detection. + + -no-libinput ......... Do not support libinput. + * -libinput ............ Enable libinput support. + + -no-gstreamer ........ Do not support GStreamer. + + -gstreamer . Enable GStreamer support + With no parameter, this will attempt to auto-detect GStreamer 0.10 and + 1.0. GStreamer 1.0 is used by default when available. + Use 0.10 or 1.0 for to override auto-detection. + + * -no-system-proxies ... Do not use system network proxies by default. + -system-proxies ...... Use system network proxies by default. + + -no-warnings-are-errors Make warnings be treated normally + -warnings-are-errors Make warnings be treated as errors + (enabled if -developer-build is active) + +QNX options: + + -no-slog2 ........... Do not compile with slog2 support. + -slog2 .............. Compile with slog2 support. + + -no-pps ............. Do not compile with pps support. + -pps ................ Compile with pps support. + + -no-imf ............. Do not compile with imf support. + -imf ................ Compile with imf support. + + -no-lgmon ........... Do not compile with lgmon support. + -lgmon .............. Compile with lgmon support. + +Apple platform options: + + -Fstring ............ Add an explicit framework path. + -fw string .......... Add an explicit framework. + + * -framework .......... Build Qt as a series of frameworks and + link tools against those frameworks. + -no-framework ....... Do not build Qt as a series of frameworks. + + * -securetransport .... Use SecureTransport instead of OpenSSL + + -no-securetransport . Do not use SecureTransport, either use OpenSSL or do not use any SSL backend + at all (if combined with -no-openssl). + + -sdk .......... Build Qt using Apple provided SDK . The argument should be + one of the available SDKs as listed by 'xcodebuild -showsdks'. + Note that the argument applies only to Qt libraries and applications built + using the target mkspec - not host tools such as qmake, moc, rcc, etc. + +Android options: + + -android-sdk path .............. The Android SDK root path. + (default $ANDROID_SDK_ROOT) + + -android-ndk path .............. The Android NDK root path. + (default $ANDROID_NDK_ROOT) + + -android-ndk-platform .......... Sets the android platform + + -android-ndk-host .............. Sets the android NDK host (linux-x86, linux-x86_64, etc.) + (default $ANDROID_NDK_HOST) + + -android-arch .................. Sets the android architecture (armeabi, armeabi-v7a, x86, mips, + arm64-v8a, x86_64, mips64) + + -android-toolchain-version ..... Sets the android toolchain version + + -no-android-style-assets ....... Do not compile in the code which automatically extracts + style assets from the run-time device. Setting this will + make the Android style behave incorrectly, but will enable + compatibility with the LGPL2.1 license. + * -android-style-assets .......... Compile the code which automatically extracts style assets + from the run-time device. This option will make the + Android platform plugin incompatible with the LGPL2.1. diff --git a/configure b/configure index 56f4a5b9b4..eac848d692 100755 --- a/configure +++ b/configure @@ -2170,447 +2170,9 @@ done #------------------------------------------------------------------------------- if [ "$OPT_HELP" = "yes" ]; then - cat < ...... The deployment directory, as seen on the target device. - (default /usr/local/Qt-${QT_VERSION}, \$PWD if -developer-build is active) - - -extprefix ... The installation directory, as seen on the host machine. - (default SYSROOT/PREFIX) - - -hostprefix [dir] .. The installation directory for build tools running on the - host machine. If [dir] is not given, the current build - directory will be used. (default EXTPREFIX) - - You may use these to change the layout of the install. Note that all directories - except -sysconfdir should be located under -prefix/-hostprefix: - - -bindir ......... User executables will be installed to - (default PREFIX/bin) - -headerdir ...... Headers will be installed to - (default PREFIX/include) - -libdir ......... Libraries will be installed to - (default PREFIX/lib) - -archdatadir .... Arch-dependent data used by Qt will be installed to - (default PREFIX) - -plugindir ...... Plugins will be installed to - (default ARCHDATADIR/plugins) - -libexecdir ..... Program executables will be installed to - (default ARCHDATADIR/libexec, ARCHDATADIR/bin for MinGW) - -importdir ...... Imports for QML1 will be installed to - (default ARCHDATADIR/imports) - -qmldir ......... Imports for QML2 will be installed to - (default ARCHDATADIR/qml) - -datadir ........ Arch-independent data used by Qt will be installed to - (default PREFIX) - -docdir ......... Documentation will be installed to - (default DATADIR/doc) - -translationdir . Translations of Qt programs will be installed to - (default DATADIR/translations) - -sysconfdir ..... Settings used by Qt programs will be looked for in - (default PREFIX/etc/xdg) - -examplesdir .... Examples will be installed to - (default PREFIX/examples) - -testsdir ....... Tests will be installed to - (default PREFIX/tests) - - -hostbindir .. Host executables will be installed to - (default HOSTPREFIX/bin) - -hostlibdir .. Host libraries will be installed to - (default HOSTPREFIX/lib) - -hostdatadir . Data used by qmake will be installed to - (default HOSTPREFIX) - -Configure options: - - The defaults (*) are usually acceptable. A plus (+) denotes a default value - that needs to be evaluated. If the evaluation succeeds, the feature is - included. Here is a short explanation of each option: - - * -release ........... Compile and link Qt with debugging turned off. - -debug ............. Compile and link Qt with debugging turned on. - -debug-and-release . Compile and link two versions of Qt, with and without - debugging turned on (Mac only). - - -force-debug-info .. Create symbol files for release builds. - - -developer-build ... Compile and link Qt with Qt developer options (including auto-tests exporting) - - * -no-optimized-tools ... Do not build optimized host tools even in debug build. - -optimized-tools ...... Build optimized host tools even in debug build. - - -opensource ........ Compile and link the Open-Source Edition of Qt. - -commercial ........ Compile and link the Commercial Edition of Qt. - - -confirm-license ... Automatically acknowledge the license (use with - either -opensource or -commercial) - - -c++std .. Compile Qt with C++ standard edition (c++11, c++14, c++1z) - Default: highest supported - - * -shared ............ Create and use shared Qt libraries. - -static ............ Create and use static Qt libraries. - - -no-accessibility .. Do not compile Accessibility support. - Disabling accessibility is not recommended, as it will break QStyle - and may break other internal parts of Qt. - With this switch you create a source incompatible version of Qt, - which is unsupported. - + -accessibility ..... Compile Accessibility support. - - -no-sql- ... Disable SQL . - -sql- Enable SQL plugin. - - Possible values for : - [$CFG_SQL_AVAILABLE ] - - -system-sqlite ..... Use sqlite from the operating system. - - -no-qml-debug ...... Do not build the in-process QML debugging support. - + -qml-debug ......... Build the QML debugging support. - - -platform target ... The operating system and compiler you are building - on (default detected from host system). - - See the README file for a list of supported - operating systems and compilers. - - -no-sse2 ........... Do not compile with use of SSE2 instructions. - -no-sse3 ........... Do not compile with use of SSE3 instructions. - -no-ssse3 .......... Do not compile with use of SSSE3 instructions. - -no-sse4.1 ......... Do not compile with use of SSE4.1 instructions. - -no-sse4.2 ......... Do not compile with use of SSE4.2 instructions. - -no-avx ............ Do not compile with use of AVX instructions. - -no-avx2 ........... Do not compile with use of AVX2 instructions. - -no-avx512 ......... Do not compile with use of AVX512 instructions. - -no-mips_dsp ....... Do not compile with use of MIPS DSP instructions. - -no-mips_dspr2 ..... Do not compile with use of MIPS DSP rev2 instructions. - - -qtnamespace Wraps all Qt library code in 'namespace {...}'. - -qtlibinfix Renames all libQt*.so to libQt*.so. - - -testcocoon ........ Instrument Qt with the TestCocoon code coverage tool. - -gcov .............. Instrument Qt with the GCov code coverage tool. - - -D ........ Add an explicit define to the preprocessor. - -I ........ Add an explicit include path. - -L ........ Add an explicit library path. - - + -pkg-config ........ Use pkg-config to detect include and library paths. By default, - configure determines whether to use pkg-config or not with - some heuristics such as checking the environment variables. - -no-pkg-config ..... Disable use of pkg-config. - -force-pkg-config .. Force usage of pkg-config (skips pkg-config usability - detection heuristic). - - -help, -h .......... Display this information. - -Third Party Libraries: - - -qt-zlib ............ Use the zlib bundled with Qt. - + -system-zlib ........ Use zlib from the operating system. - See http://www.gzip.org/zlib - - -no-mtdev ........... Do not compile mtdev support. - + -mtdev .............. Enable mtdev support. - - + -no-journald ........ Do not send logging output to journald. - -journald ........... Send logging output to journald. - - + -no-syslog .......... Do not send logging output to syslog. - -syslog ............. Send logging output to syslog. - - -no-gif ............. Do not compile GIF reading support. - - -no-libpng .......... Do not compile PNG support. - -qt-libpng .......... Use the libpng bundled with Qt. - + -system-libpng ...... Use libpng from the operating system. - See http://www.libpng.org/pub/png - - -no-libjpeg ......... Do not compile JPEG support. - -qt-libjpeg ......... Use the libjpeg bundled with Qt. - + -system-libjpeg ..... Use libjpeg from the operating system. - See http://www.ijg.org - - -no-doubleconversion ..... Use sscanf_l and snprintf_l for (imprecise) double conversion. - -qt-doubleconversion ..... Use the libdouble-conversion bundled with Qt. - + -system-doubleconversion . Use the libdouble-conversion provided by the system. - See https://github.com/google/double-conversion - - -no-freetype ........ Do not compile in Freetype2 support. - -qt-freetype ........ Use the libfreetype bundled with Qt. - + -system-freetype..... Use the libfreetype provided by the system (enabled if -fontconfig is active). - See http://www.freetype.org - - -no-harfbuzz ........ Do not compile HarfBuzz-NG support. - -qt-harfbuzz ........ Use HarfBuzz-NG bundled with Qt to do text shaping. - It can still be disabled by setting - the QT_HARFBUZZ environment variable to "old". - + -system-harfbuzz .... Use HarfBuzz-NG from the operating system - to do text shaping. It can still be disabled - by setting the QT_HARFBUZZ environment variable to "old". - See http://www.harfbuzz.org - - -no-openssl ......... Do not compile support for OpenSSL. - + -openssl ............ Enable run-time OpenSSL support. - -openssl-linked ..... Enabled linked OpenSSL support. - - -no-libproxy ....... Do not compile support for libproxy - + -libproxy .......... Use libproxy from the operating system. - - -qt-pcre ............ Use the PCRE library bundled with Qt. - + -system-pcre ........ Use the PCRE library from the operating system. - - -qt-xcb ............. Use xcb- libraries bundled with Qt. - (libxcb.so will still be used from operating system). - + -system-xcb ......... Use xcb- libraries from the operating system. - - -xkb-config-root .... Set default XKB config root. This option is used only together with -qt-xkbcommon-x11. - -qt-xkbcommon-x11 ... Use the xkbcommon library bundled with Qt in combination with xcb. - + -system-xkbcommon-x11 Use the xkbcommon library from the operating system in combination with xcb. - - -no-xkbcommon-evdev . Do not use X-less xkbcommon when compiling libinput support. - * -xkbcommon-evdev .... Use X-less xkbcommon when compiling libinput support. - - -no-xinput2 ......... Do not compile XInput2 support. - * -xinput2 ............ Compile XInput2 support. - - -no-xcb-xlib......... Do not compile Xcb-Xlib support. - * -xcb-xlib............ Compile Xcb-Xlib support. - - -no-glib ............ Do not compile Glib support. - + -glib ............... Compile Glib support. - - -no-pulseaudio ...... Do not compile PulseAudio support. - + -pulseaudio ......... Compile PulseAudio support. - - -no-alsa ............ Do not compile ALSA support. - + -alsa ............... Compile ALSA support. - - -no-gtk ............. Do not compile GTK platform theme support. - + -gtk ................ Compile GTK platform theme support. - -Additional options: - - -make ....... Add part to the list of parts to be built at make time. - (defaults to: $QT_DEFAULT_BUILD_PARTS) - -nomake ..... Exclude part from the list of parts to be built. - - -skip ..... Exclude an entire module from the build. - - -no-compile-examples ... Install only the sources of examples. - - -no-gui ............ Don't build the Qt GUI module and dependencies. - + -gui ............... Build the Qt GUI module and dependencies. - - -no-widgets ........ Don't build the Qt Widgets module and dependencies. - + -widgets ........... Build the Qt Widgets module and dependencies. - - -R ........ Add an explicit runtime library path to the Qt - libraries. - -l ........ Add an explicit library. - - -no-rpath .......... Do not use the library install path as a runtime - library path. On Apple platforms, this implies using - absolute install names (based in -libdir) for dynamic - libraries and frameworks. - + -rpath ............. Link Qt libraries and executables using the library - install path as a runtime library path. Equivalent - to -R install_libpath - - -continue .......... Continue as far as possible if an error occurs. - - -verbose, -v ....... Print verbose information about each step of the - configure process. - - -silent ............ Reduce the build output so that warnings and errors - can be seen more easily. - - -no-nis ............ Do not compile NIS support. - * -nis ............... Compile NIS support. - - -no-cups ........... Do not compile CUPS support. - * -cups .............. Compile CUPS support. - Requires cups/cups.h and libcups.so.2. - - -no-iconv .......... Do not compile support for iconv(3). - * -iconv ............. Compile support for iconv(3). - - -no-evdev .......... Do not compile support for evdev. - * -evdev ............. Compile support for evdev. - - -no-tslib .......... Do not compile support for tslib. - * -tslib ............. Compile support for tslib. - - -no-icu ............ Do not compile support for ICU libraries. - + -icu ............... Compile support for ICU libraries. - - -no-fontconfig ..... Do not compile FontConfig support. - + -fontconfig ........ Compile FontConfig support. - - -no-strip .......... Do not strip binaries and libraries of unneeded symbols. - * -strip ............. Strip binaries and libraries of unneeded symbols when installing. - - * -no-pch ............ Do not use precompiled header support. - -pch ............... Use precompiled header support. - - * -no-ltcg Do not use Link Time Code Generation - -ltcg Use Link Time Code Generation. - - -no-dbus ........... Do not compile the Qt D-Bus module. - + -dbus-linked ....... Compile the Qt D-Bus module and link to libdbus-1. - -dbus-runtime ...... Compile the Qt D-Bus module and dynamically load libdbus-1. - - -reduce-relocations ..... Reduce relocations in the libraries through extra - linker optimizations (Qt/X11 and Qt for Embedded Linux only; - experimental; needs GNU ld >= 2.18). - - -no-use-gold-linker ..... Do not link using the GNU gold linker. - + -use-gold-linker ........ Link using the GNU gold linker if available. - - -force-asserts ........ Force Q_ASSERT to be enabled even in release builds. - - -sanitize [address|thread|memory|undefined] Enables the specified compiler sanitizer. - - -device ............... Cross-compile for device (experimental) - -device-option ... Add device specific options for the device mkspec - (experimental) - - -host-option ..... Add host specific options for the host mkspec - - * -no-separate-debug-info . Do not store debug information in a separate file. - -separate-debug-info .... Strip debug information into a separate file. - - -no-xcb ............ Do not compile Xcb (X protocol C-language Binding) support. - * -xcb ............... Compile Xcb support. - - -no-eglfs .......... Do not compile EGLFS (EGL Full Screen/Single Surface) support. - * -eglfs ............. Compile EGLFS support. - - -no-kms ............ Do not compile backends for KMS. - * -kms ............... Compile backends for KMS. - - -no-gbm ............ Do not compile backends for GBM. - * -gbm ............... Compile backends for GBM. - - -no-directfb ....... Do not compile DirectFB support. - * -directfb .......... Compile DirectFB support. - - -no-linuxfb ........ Do not compile Linux Framebuffer support. - * -linuxfb ........... Compile Linux Framebuffer support. - - * -no-mirclient....... Do not compile Mir client support. - -mirclient.......... Compile Mir client support. - - -qpa ......... Sets the default QPA platform (e.g xcb, cocoa, windows). - - -xplatform target ... The target platform when cross-compiling. - - -sysroot ...... Sets as the target compiler's and qmake's sysroot and also sets pkg-config paths. - -no-gcc-sysroot ..... When using -sysroot, it disables the passing of --sysroot to the compiler - - -external-hostbindir .. Path to Qt tools built for this machine. Use this when -platform - does not match the current system, i.e., to make a Canadian Cross Build. - - -no-feature- Do not compile in . - -feature- .. Compile in . The available features - are described in src/corelib/global/qfeatures.txt - - -qreal [double|float] typedef qreal to the specified type. The default is double. - Note that changing this flag affects binary compatibility. - - -no-opengl .......... Do not support OpenGL. - -opengl ....... Enable OpenGL support - With no parameter, this will attempt to auto-detect - OpenGL ES 2.0 and higher, or regular desktop OpenGL. - Use es2 for to override auto-detection. - - -no-libinput ........ Do not support libinput. - * -libinput ........... Enable libinput support. - - -no-gstreamer ....... Do not support GStreamer. - + -gstreamer Enable GStreamer support - With no parameter, this will attempt to auto-detect GStreamer 0.10 and - 1.0. GStreamer 1.0 is used by default when available. - Use 0.10 or 1.0 for to override auto-detection. - - * -no-system-proxies .. Do not use system network proxies by default. - -system-proxies ..... Use system network proxies by default. - - -no-warnings-are-errors Make warnings be treated normally - -warnings-are-errors Make warnings be treated as errors - (enabled if -developer-build is active) - -QNX options: - - -no-slog2 .......... Do not compile with slog2 support. - -slog2 ............. Compile with slog2 support. - - -no-pps ............ Do not compile with pps support. - -pps ............... Compile with pps support. - - -no-imf ............ Do not compile with imf support. - -imf ............... Compile with imf support. - - -no-lgmon .......... Do not compile with lgmon support. - -lgmon ............. Compile with lgmon support. - -MacOS/iOS options: - - -Fstring ........... Add an explicit framework path. - -fw string ......... Add an explicit framework. - - * -framework ......... Build Qt as a series of frameworks and - link tools against those frameworks. - -no-framework ...... Do not build Qt as a series of frameworks. - - * -securetransport ... Use SecureTransport instead of OpenSSL - - -no-securetransport Do not use SecureTransport, either use OpenSSL or do not use any SSL backend - at all (if combined with -no-openssl). - - -sdk ......... Build Qt using Apple provided SDK . The argument should be - one of the available SDKs as listed by 'xcodebuild -showsdks'. - Note that the argument applies only to Qt libraries and applications built - using the target mkspec - not host tools such as qmake, moc, rcc, etc. - -Android options: - - -android-sdk path .............. The Android SDK root path. - (default \$ANDROID_SDK_ROOT) - - -android-ndk path .............. The Android NDK root path. - (default \$ANDROID_NDK_ROOT) - - -android-ndk-platform .......... Sets the android platform - (default $CFG_DEFAULT_ANDROID_PLATFORM) - - -android-ndk-host .............. Sets the android NDK host (linux-x86, linux-x86_64, etc.) - (default \$ANDROID_NDK_HOST) - - -android-arch .................. Sets the android architecture (armeabi, armeabi-v7a, x86, mips, - arm64-v8a, x86_64, mips64) - (default $CFG_DEFAULT_ANDROID_TARGET_ARCH) - - -android-toolchain-version ..... Sets the android toolchain version - (default $CFG_DEFAULT_ANDROID_NDK_TOOLCHAIN_VERSION) - - -no-android-style-assets ....... Do not compile in the code which automatically extracts - style assets from the run-time device. Setting this will - make the Android style behave incorrectly, but will enable - compatibility with the LGPL2.1 license. - * -android-style-assets .......... Compile the code which automatically extracts style assets - from the run-time device. This option will make the - Android platform plugin incompatible with the LGPL2.1. -EOF - - exit 0 -fi # Help + cat $relpath/config_help.txt + exit 0 +fi #------------------------------------------------------------------------------- # platform detection