On NTFS, a junction point can be created and deleted by the mklink and
rmdir commands, respectively. If a directory is not identified
correctly as a junction, then applications will likely try to remove
it using recursive methods, leading to fatal data loss.
With this change, Qt can identify file system entries as junctions,
allowing applications to use the correct file system operation to
remove it.
The test needs to delay the cleaning up of junctions and files it
creates until the checks are complete; since they might fail and make
the test function return prematurely, use a scope guard.
[ChangeLog][QtCore][QFileInfo] Add QFileInfo::isJunction so that
applications can recognize NTFS file system entries as junctions
Task-number: QTBUG-75869
Change-Id: I3c208245afbd9fb7555515fb776ff63b133ca858
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
It was converted over ARGB32PM, when it should have been directly
converted to not lose accuracy, instead there was an unnecessary direct
ARGB32->RGB30 conversion, which was converted to the necessary type.
This also improves the selection of conversion over ARGB32PM or RGBA64PM
for ARGB32 and RGBA8888 by using 32-bit conversion when alpha is not
relevant.
Change-Id: I5990d8a23b2909d3910d8c1213fa46477742b052
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
Since the test was fatuous for i == 0, iterate from i = 1, instead.
Change-Id: I9b9c1b7b10639aefdd74f48051d592da4f84dc85
Reviewed-by: Jesus Fernandez <jsfdez@gmail.com>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
It doesn't make a lot of sense to have two names for the
same role. Use 'fileIcon' exclusively for the Qt::Decoration/
FileIconRole.
Change-Id: Icaa46ba4aa61efc56ba007a14bab5e59ea26cd35
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
You can save a "skeletal" document with list items to fill in later,
the same as you can do in HTML or ODF format. Reading them back via
QTextDocument::fromMarkdown() isn't always perfect though.
Fixes: QTBUG-79217
Change-Id: Iacdb3e6792250ebdead05f314c9e3d00546eeb9f
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
The markdown parser generates empty lists in some cases when a character
that can be used as a bullet is found on a line by itself.
cbEnterBlock() and cbLeaveBlock() are called symmetrically in such cases.
QStack::pop() on an empty stack triggers an assert, so push and pop need
to be done symmetrically too. But it's difficult to actually create the
list as soon as the MD_BLOCK_UL or MD_BLOCK_OL callback occurs, without
breaking the case fixed in 7224d0e427 (and
probably other cases). That's because QTextCursor::insertList() creates
a list item at the same time as it creates the list itself, and also
inherits block formatting from the previous block. We now insert empty
lists with empty items whenever the need for that is detected though,
and there's a failsafe to prevent popping in case something still goes
wrong with that logic. We aren't strict about reproducing the original
markdown when regenerating it via toMarkdown(), but it's getting closer.
Fixes: QTBUG-78870
Change-Id: Ided194ce7aec2710c60dbac42761ee4169ed9b78
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Robert Loehning <robert.loehning@qt.io>
If a font with only a family set is resolved with one that has been setup
with setFamilies() then the family needs to be prepended to the families
list after resolving. This is so that the font still prefers the one set
as just a family with no famillies set.
This also amends the QFontDialog test to account for this too.
[ChangeLog][QtGui][Text] Resolving a font that just has a family set
with families set will prepend the family to the families so that it
is still the first preference for the font.
Task-number: QTBUG-46322
Change-Id: Icc4005732f95b2b4c684e592b06b31e133270e44
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
In qmake syntax there should be a colon or curly braces following a condition.
Change-Id: Ibd989662aef6320cec8093e7c6103bf8362b8255
Reviewed-by: Liang Qi <liang.qi@qt.io>
OpenSSL 1.0.2 will stop receiving all support at the end
of 2019. Qt 5.15 is our next LTS thus makes sense remove
OpenSSL 1.0.2 support there. This also allows us quite
a significant cleanup of an old heavily if-defed code
and all 'pre11' suffixed source files.
[ChangeLog][QtNetwork][SSL] Removed OpenSSL 1.0.x support, now 1.1.x is required
Change-Id: I70c70c56cbd8aeff793afe793335696d1b1b7408
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Call adjustedFormat() as advised by the docs: "Applications are advised
to set this format on their QWindow in order to avoid potential BAD_MATCH
failures."
Task-number: QTBUG-79659
Change-Id: Ibf415fb0ee64bdd3f01d4ba744244bce811c0d27
Reviewed-by: Paul Olav Tvete <paul.tvete@qt.io>
Had to teach the update program to accept category Lm as for
Joining_Transparent, for the sake of a new ArabicShaping.txt entry.
Added three new Unicode versions, several new scripts and a new
word-break class.
Updated UCD's test data for tst_QTextBoundaryFinder. This left 57
tests failing; I have commented out the data rows for those tests,
pending someone with more knowledge addressing this.
Task-number: QTBUG-79631
Task-number: QTBUG-79418
Change-Id: Ic33d3b3551195d47a84d98e84020f57a68f0b201
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
Do this by templating the floating-point tests, which removes some
existing duplication as well as avoiding new duplication. Did some
renaming in the process. Added some tests of fuzzyCompare that come
closer to its boundary. Increased number of tests from 69 to 97. Use
std::numeric_limits to replace assorted hard-coded constants and old
C-library boundary-value macros.
It turns out MSVC's float conflates quiet and signaling NaN (although
MinGW's doesn't); and WebAssembly's old fastcomp compiler conflates
NaNs for both float and double; so XFAIL the test for distinct NaNs in
those cases.
Change-Id: I0a1c0d2f68f75d51b8cda9e3ddfe7fa9c190a3e2
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Erik Verbruggen <erik.verbruggen@me.com>
Binary JSON is said to become deprecated. Therefore, add support
for CBOR. Binary JSON is still supported for deserialization, so
all existing .qsb files will continue to work, as long as the
binaryjson feature is enabled in the Qt build.
Also makes QShaderDescription comparable. This is important for
tests in particular.
A nice side effect of using CBOR is that .qsb files become smaller.
For a typical Qt Quick material shader this can mean a reduction of
300 bytes or more.
Task-number: QTBUG-79576
Change-Id: I5547c0266e3e8128c9653e954e47487352267f71
Reviewed-by: Paul Olav Tvete <paul.tvete@qt.io>
Testes file load and save, computes a sha256 hash
for verifying file content.
Change-Id: Id7f697c4dfd41e051442350f4050f04b493cfc18
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
When a window is closed, then it will cause the child windows to be
closed as well as a result. Therefore in order to ensure that they are
shown again as a result, we need to remove the WA_WState_ExplicitShowHide
attribute if the widget was not already hidden before. This enables us to
test for this attribute when calling showChildren(), so that if the
window has a windowHandle then we can make sure that this widget is shown
again.
Fixes: QTBUG-73021
Change-Id: I1186242b889899dfcd38d782a67567348e2055ee
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
Cleanup QDataWidgetMapper/QFileIconProvider/ItemEditorFactory autotests:
- use range-based for loops
- use nullptr
- use member initialization
- use new signal/slot syntax
- use static invocations
- use override
Change-Id: I1a36ea2da7de1cfa5d5d4e305ef508fda3a6c460
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
If a transfer timeout is set for QNetworkRequest, downloads
and uploads are aborted if the timeout expires and bytes
haven't been transmitted in either direction.
Task-number: QTBUG-3443
Change-Id: I702d223d673f0c6612343dc9d053815acfcb61b8
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Released on October 4th.
Adds Windows names for two time zones, Qyzylorda and Volgograd.
Added languages Chickasaw (cic), Muscogee (mus) and Silesian (szl).
Norwegian number formatting has flipped back to using colon rather
than dot as time separator; it's flipped back and forth over the last
several CLDR releases. The dot form is present as a variant, the
colon form was long given as the normal pattern, then went away; but
now it's back as a contributed draft and that's what we pick up.
The MS-Win time-zone ID script was iterating a dict, causing random
reshuffling when new entries are added. Fixed that by doing the
critical iteration in sorted order.
Omitted locales ccp_BD and ccp_IN due to QTBUG-69324.
Task-number: QTBUG-79418
Change-Id: I43869ee1810ecc1fe876523947ddcbcddf4e550a
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
While I was looking into a bug related to problems building the test
without GUI, I noticed a lot of spurious #include lines so tidied up a
bit. Split some long lines, while I was about it.
Change-Id: Id87eb6f612c6b174f8240dfe9c00e0929244fb6c
Reviewed-by: Albert Astals Cid <albert.astals.cid@kdab.com>
Thanks to Dmitriy Purgin for pointing out the serialization one.
Task-number: QTBUG-79353
Change-Id: Ia3d750b17ddd8fbb7a83a55df7e4546ca78c358b
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
The qmake config for tst_QString tried to impose QT_NO_CAST_TO_ASCII
on it, but the source file explicitly #undef-s this symbol and its
friends. Leave the define commented out in the .pro so that a comment
can explain why it's no good.
Change-Id: I7620f4e104f0cdab05fdc246b903c40026e63d76
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Test QT_CONFIG(icu) in the code instead of testing qtConfig(icu) in
the profile and setting an extra define just to shadow what's already
defined. Also remove the matching define from qcollator.pro, whose
test code didn't use it.
Noticed while reviewing the conversions to CMake.
Change-Id: I19d3b1026b2a8f50ec424c450614e721500fd38a
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
See the comment in the test for details.
Change-Id: Ie3d356e476ba0419d304bccd396fc18a831a30cd
Reviewed-by: Paul Olav Tvete <paul.tvete@qt.io>
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
When the first column is hidden or not visible in the current viewport,
it is not possible to deselect the current row.
Fix it by passing the correct column to
QItemSelectionModel::selectedRows() when testing if the current index is
selected.
Fixes: QTBUG-79092
Change-Id: I9d8082d2b29ad2f799156aee910c6ff6e3217771
Reviewed-by: David Faure <david.faure@kdab.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
stat() and friends expect a null-terminated C string. There is no way to
generate anything useful from a string that has null bytes in the
middle. It's important to catch this early, as otherwise, for example, a
QDir::exists() on such a path can return true, as the path is silently
truncated.
Extend the checks for empty file names to windows and add checks for null
bytes.
Change-Id: Ie9794c3a7c4fd57f9a66bdbbab8b45a08b6f9170
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
During the creation of a raster paint engine in QImage::paintEngine(),
the QImage will be detached. At least old gcc versions would get
confused so that the newly created paintengine would end up in the old
QImage copy insteads of the newly detached one. Work around by
dropping the temporary engine pointer.
Fixes: QTBUG-79383
Change-Id: I27b1f24312269bc2bcc641dc4334397a92e3bfbb
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
The default font on Windows ("Times" is not found) does not have
a ligature for "fi", so the test would not actually be testing
what it was supposed to on this platform, and would pass even
when the code was buggy.
To enable the test on Windows, we select a standard font which
has the ligature (Calibri).
Change-Id: Ic117cd8e549aa729a0cd68006d7c180c6c89c053
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Either by testing for platform name or window activation.
After this gets in, we can enable widget tests in the Wayland bot, which
hopefully will reduce the number of regressions in the Wayland plugin.
Fixes: QTBUG-62188
Change-Id: I71ce8abd6b5891e5b953126b1c35345892585931
Reviewed-by: Paul Olav Tvete <paul.tvete@qt.io>
For some scalings, setClipRect(QRect) would produce a clip one pixel
different from setClipRect(QRectF) because of different
rounding. Ditto for setClipRegion. Fix by making sure to transform
QRectFs instead of QRects.
Fixes: QTBUG-78962
Fixes: QTBUG-78963
Change-Id: I0be721133858c30769ec6d81e978962a3d6b70cf
Reviewed-by: Christoph Cullmann <cullmann@kde.org>
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
CMake will complain that we have a duplicate test name otherwise.
Generally it makes a lot of sense to name the test binary the same as
the test itself.
Change-Id: I27c4b51e6a2869f025e1100f1a9dd6b54ebdaf55
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Mitch Curtis <mitch.curtis@qt.io>
Reviewed-by: Morten Kristensen <me@mortens.dev>
Reviewed-by: Liang Qi <liang.qi@qt.io>
Makes the tests pass on Wayland.
Task-number: QTBUG-62188
Change-Id: I5860c1ae6dd3d15632d827f4e357cb6c2cc9c5e3
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
This makes the test pass on Wayland.
Task-number: QTBUG-62188
Change-Id: Ib67cf8913055bbe753f71791095aff035342c18d
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
This is part of the migration of qtbase from QRexExp to
QRegularExpression.
[ChangeLog][QtCore][QAbstractItemModel] The match() method now
supports the new Qt::RegularExpression match flag value. This
will allow users to use either a string or a fully configured
QRegularExpression when doing searches. In the second case,
the case sensitivity flag will be ignored if passed.
Task-number: QTBUG-72587
Change-Id: I07c8d72a661c48b7f4fcf13ef8e95980bcdcb998
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
