Windows 8 no longer allows for negative values to WM_NCCALCSIZE
to shrink the title bar.
Task-number: QTBUG-28435
Change-Id: I2e2e5e6aea9cc6781be4e9b06c9547e1e5ec86cb
Reviewed-by: Miikka Heikkinen <miikka.heikkinen@digia.com>
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Add custom frames which are added to the system frame to
the platform plugin. Make them settable when creating a platform
window using dynamic properties and per window properties
of the platform native interface.
Use this in favor of the native event handling changing the frame
in wizard_win.cpp since that caused the frame/backing store sizes
of the QWindow to be wrong.
Task-number: QTBUG-28099
Change-Id: Idd6416cf1b0eb629f56663088b0ce17162e1739d
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Fixes breakage introduced by cdc436ebe6 .
Top level widgets with translucent backgrounds were invisible since
opacity was set to 0.
Task-number: QTBUG-28531
Change-Id: I97058ac1b971422f3bda3a5ffed479ec55bfe5d4
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
CGRect == NSRect only in 64-bit mode.
Change-Id: I069b5b050ccf02654a65375c3ab0f58f7d5cc659
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
Don't autorelease in the elementWithInterface function,
rename it to createElementWithInterface. The element
can then be released immediately or autoreleased ("delete
later").
Change-Id: I155a85404c34d756c1752eb7c24a7fb0f3cf2e77
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
'timex' is not a Qt class, so there is no need to check it.
Change-Id: Ic77b3518e5a7eaf2c2bc7dcd98d1f9aebf4b655d
Reviewed-by: Caroline Chao <caroline.chao@digia.com>
Instead of testing the "windows" and "motif" styles, that test should
actually test the scrollBarRanges for all available styles. To be able
to do that, the magic numbers 16 (width/height of scrollbars) and 4
(spacing for the faux motif style) were replaced and instead of setting
the explicit values in the data the "number of scrollbars/spacings to
add/remove" is saved in a struct and the value of these (depending
on the style) is obtained in the test run.
This change does not also cause the fusion style to also be tested but
also fixes this test for Windows 7 and 8 (Aero) where the scrollbar
width/height is not 16 but 17.
Task-number: QTBUG-28611
Task-number: QTBUG-29002
Change-Id: I5d103018fde81cee6e6e89cd414426768b2dc8e7
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
It mustn't be installed and it mustn't be available in the master
include. It's an assembler header anyway.
Also, take the opportunity to add the "We mean it".
Change-Id: Id4233e5bda458714a0d329549afe499d861acc56
Reviewed-by: Adrian Perez de Castro <aperez@igalia.com>
Reviewed-by: Sergio Ahumada <sergio.ahumada@digia.com>
This definition was missing. It's clear MSVC supports this feature
because it has been in use in qtconcurrentrun.h under an #ifdef
Q_COMPILER_DECLTYPE, which is defined for MSVC.
Change-Id: Id76198b2be8bba13fd00c65d6d4f73d3ef601449
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
QQnxCliboard::setMimeData was not cleaning the system clipboard aproppriately
when m_mimeData != 0 but m_mimeData->userMimeData == 0, as it would return
early before the empty_clipboard() statement.
Also, we need to emit the dataChanged() signal after the clipboard has been
cleared as well.
Change-Id: Ie06609e6e3a0a0135f1cdb6cf4c90b490ef2fc28
Reviewed-by: Kevin Krammer <kevin.krammer@kdab.com>
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
Fully decorated windows cannot be smaller than 160x30 (Large fonts).
Enlarge Windows or remove Window frame to get rid of decorations.
Task-number: QTBUG-28611
Change-Id: Idb6ee94fb8d0760d5f97042b3084557f11e9fdf9
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Adds an auto test that verifies that the replies to POST and PUT
requests are not cached even though they contain a max-age header and
that subsequent GET requests are reloaded from the server.
Change-Id: I188ae1200cb5551e164722c0f479719be8d11bfb
Reviewed-by: Peter Hartmann <phartmann@rim.com>
these variables are somewhat magic: they are relative to DESTDIR, and
they also specify the installation location relative to target.path.
the actual output directories are created by other code.
Change-Id: Iead3006057516f5a49b6fd4bd8996a062c984fce
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Both qdoc and Q_QDOC are used in source code, which looks not good.
Change-Id: I4f3a71670278b0758d92bfa5db086a07e1b1acfd
Reviewed-by: hjk <qthjk@ovi.com>
Reviewed-by: Paul Olav Tvete <paul.tvete@digia.com>
qApp->topLevelAt() returns the QShapedPixmapWindow that the DnD
operation created, but what we want is the QWidgetWindow.
QWidgetWindow has the code to handle QDragMove events.
In Qt4, QShapedPixmapWidget had a parent, so was never returned
by qApp->topLevelWidgets().
In Qt5 we must filter it out. Bug is visible in the QNX plugin,
which is the only user of QSimpleDrag.
Change-Id: I920da86f3a1a92ce8e087f5948292fa4c68d4d81
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
A regression caused by 79a389 - it should only draw a styled frame for
text input widgets.
Task-number: QTBUG-28876
Change-Id: I5cda920b7db55f35e0ab6cee460c0e27951d29b9
Reviewed-by: Jonathan Liu <net147@gmail.com>
Reviewed-by: Jens Bache-Wiig <jens.bache-wiig@digia.com>
Cross bulding on unix for mingw exploits the fact that makefiles
generated for mingw work with plain make. There is no mingw32-make, so
this is the only option.
Arguably, plain make could also be used in an MSYS environment,
perhaps detected by MINGW_IN_SHELL, but there might be good reasons I
don't know about not to do this.
Change-Id: I694c74046a307c2887af1c30cca36f95e242adc1
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
This match type doesn't do any match at all; it's only necessary to
properly introduce default constructors for QRegularExpressionMatch
and QRegularExpressionMatchIterator (since they return the match type
that created them).
Change-Id: Ibfe92459c7fdd23129cf3afe073cd443c461ddeb
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Provide addition/subtraction for QMargins as well as
multiplication and division for int/qreal similar
to QPoint. Add unary minus.
Change-Id: If4eb831cfd610b34b5ca361619b1636031811d0a
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
Reviewed-by: Mitch Curtis <mitch.curtis@digia.com>
- Addition of a QMargin to a QRect.
- Removal of a QMargin from a QRect.
- Remove implementation from Windows platform plugin.
Change-Id: Iae54bc13e94a7ece48853b1d3f3de2bfc154d2dd
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
Reviewed-by: Mitch Curtis <mitch.curtis@digia.com>
Check that the regular expression, the match type and the match options
returned by QRegularExpression/QRegularExpressionIterator are the
same ones passed to match / globalMatch.
Change-Id: Ibd282379bb60b53d614b1d56a7e08b3d6c236da6
Reviewed-by: Jason McDonald <macadder1@gmail.com>
QRegExp and QRegularExpression are totally independent, therefore
using two different defines is the right thing to do.
Also, document the new define in qfeatures.{txt,h}.
Change-Id: Ice4826ea543f4b22f1cc27bf31ed6e043d0c43b0
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
The operator<= and operator>= overloads for QPoint are used only with
Q_ASSERT. Clang was correct that they are not used.
Even though they are inline, Clang reports the functions as unused
because they were inside an anonymous namespace. So take the off the
namespace. They are correct for external use, should they be exported
by accident (which they aren't now).
painting/qpathsimplifier.cpp:76:13: error: unused function 'operator<='
[-Werror,-Wunused-function]
inline bool operator <= (const QPoint &a, const QPoint &b)
Change-Id: I67415621e777fd0d59cbdede26c34d8bb13f7346
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
It is not relevant that it has been part of the class since Qt 4.6. It has
always been internal until now. The release where it became public API (5.1)
is what is relevant.
Change-Id: Ib740f3ed6df190884a94fb2c11dd74cd7edb7b1a
Reviewed-by: Venugopal Shivashankar <venugopal.shivashankar@digia.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
QRegularExpression counterpart for QRegExpValidator.
Change-Id: Ib391e73dd49e32aeb9b48e6f2217b67a17a83a11
Reviewed-by: David Faure <david.faure@kdab.com>
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
- Add initial set of amd64 data
- Add QtWidgets to global.cfg
Task-number: QTQAINFRA-321
Change-Id: I9bffaa00ac01976546629988ac69965383eb2efd
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Add additional tests for the updates in the Qt4.8 qlocale data (CLDRv2.0) already existing in Qt5 locale data (CLDRv22.1):
- The NumberingSystem for some Indic and Slovak locales.
- The Month/Day name in Irish/Gaelic locale.
- The AM/PM Text in Turkish locale.
Change-Id: Iaea4f13ec79f94ab937b97f8ae60eb8d8f217c4b
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
These types are either built-in or 'automatically declared' and so
don't need to be explicitly declared as metatypes.
Change-Id: Ifd116dee32a450ff89a9a1011e26b434765d6e95
Reviewed-by: David Faure <david.faure@kdab.com>
std::forward and std::move are not yet supported by the NDK.
Change-Id: I1df1b5e88717c0d27a280862b98eb68262927f2b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
These types are either built-in or 'automatically declared' and so
don't need to be explicitly declared as metatypes.
Change-Id: Ibe8e2ec867afb4051a3c7eef806d9cd86945928b
Reviewed-by: David Faure <david.faure@kdab.com>
This is a refactoring leftover from commit
bb86e77cc437b92d49692bb7026c57626d77079f in qt/qt.git.
Change-Id: I04993faca44ad0ffca2ae163049770c29d232a47
Reviewed-by: Zeno Albisser <zeno.albisser@digia.com>
Reviewed-by: Denis Dzyubenko <denis@ddenis.info>
These types are either built-in or 'automatically declared' and so
don't need to be explicitly declared as metatypes.
Change-Id: I95b8b4b674e85b2b3c374931f6231d60f35be984
Reviewed-by: David Faure <david.faure@kdab.com>
These types are either built-in or 'automatically declared' and so
don't need to be explicitly declared as metatypes.
Change-Id: I54523eb854619917123d8816d3cd6c3a1f5b4c55
Reviewed-by: David Faure <david.faure@kdab.com>
Make the settings path to be relative to $prefix, instead of absolute.
And update the configure -help output to match the actual code.
Change-Id: I71e4ad6e3db046fec95ef057ae7f7bc566bc5794
Reviewed-by: Sune Vuorela <sune@vuorela.dk>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
