The Android tests were marked insignificant for some days, due to an
emulator issue, these tests slipped during that time. Exclude them now
to bring Android tests.
Task-number: QTBUG-89402
Pick-to: 6.0
Change-Id: I96d0f87b36975b7e2c83956b04b6569a03a781a9
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
This patch adds native support for SQL_REAL (float) and SQL_SMALLINT
(short). Previously those datatypes were mapped to double and integer.
[ChangeLog][QtSql] The ODBC driver now properly maps QMetaType::Float to
real sql datatype and QMetaType::Short to smallint
Fixes: QTBUG-8963
Fixes: QTBUG-57279
Change-Id: Ifec4c609734dbe6165c1ebdadb461c2aae47ba78
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
SecureTransport does not allow deprecated digest algorithms, and
(depending on ST version) it may or may not accept our server's
certificate.
Funnily enough, they 'fluctuate' between versions again and again.
Fixes: QTBUG-89922
Change-Id: Ie5fbfca316806bd5000ce2d128b81b718bb36624
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
With the introduction of QKeyCombination, the result of |'ing together
a set of modifiers and a key goes always through the same QKeySequence
constructor, no matter the order.
The implicit conversion through int when the wrong order is used
causes a compiler warning as that conversion is deprecated. So remove
that test case.
Pick-to: 6.0
Change-Id: I04e27bcd51723ee0efc77e52e45ca3eb8bac5fc7
Reviewed-by: Mitch Curtis <mitch.curtis@qt.io>
Test data causes the QBitArray to be read as 0 byte length. Same issue
on all 32bit systems, removing android blacklisting as this was the only
one failing there.
Task-number: QTBUG-87660
Change-Id: I63f0c1c6fa4e2242e6ebe70f50e422ab0fbf1c88
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Most tests fail when running on QEMU ARMv7, but not on target HW or
QEMU ARM64.
Task-number: QTBUG-89819
Change-Id: I686268c200cce1a44a717b80c2970f608be44636
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Remove the qmake project files for most of Qt.
Leave the qmake project files for examples, because we still test those
in the CI to ensure qmake does not regress.
Also leave the qmake project files for utils and other minor parts that
lack CMake project files.
Task-number: QTBUG-88742
Change-Id: I6cdf059e6204816f617f9624f3ea9822703f73cc
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
systemTimeZoneChange() fails also on 32bit QEMU ARMv7.
Task-number: QTBUG-87663
Change-Id: I5c006a8637edff0a95b1f9b76d2c58006aeae6d6
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The test case fails also on QEMU ARMv7.
Task-number: QTBUG-88705
Change-Id: Ibe8c777f0205b298f6b9a27c067dd552253fcf33
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
The alignment has been recently updated but never correctly tested,
as test has either been disabled or marked as insignificant.
Change-Id: If6e529c290b2057f58c3b27c89279d9e90728ad4
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: hjk <hjk@qt.io>
As lists of QStrings and QByteArrays are sequentially iterable the base
types should really also be.
The only problem is that they don't have methods to remove items from
the back or the front, but that is well within what we can support with
QSequentialIterable.
Change-Id: I2ab551e7b11a092aba363fb4012d131bbc4b11b4
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
This is standard for all test cases. It matters, because cmake targets
are generated, and e.g.
$ ninja tst_qabstractitemmodeltester
should do what the user expects.
Change-Id: Iac8160c53d5005382e61c03b7daceaba0a4c2596
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: David Skoland <david.skoland@qt.io>
QMultiHash::equal_range crashes when called in a const member function.
The Data `d` is a NULL pointer when calling equal_range()
before inserting data into an empty QMultiHash.
Then calling`d->find` crashes.
Fixes: QTBUG-89687
Pick-to: 6.0
Change-Id: I10c3d196cbc72aed8c8c922ef16534bba51037b7
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
The spec hasn't changed, but I made the same mistake in xdgmime
(the reference implementation) and in Qt: when multiple globs match,
and the result from magic sniffing is unrelated to any of those globs,
then I used the magic result, but that's wrong, globs have priority
and one of them should be picked up.
This is now fixed in xdgmime
(https://gitlab.freedesktop.org/xdg/xdgmime/-/merge_requests/3)
and in the expected results in shared-mime-info
(https://gitlab.freedesktop.org/xdg/shared-mime-info/-/merge_requests/99)
which this commit is also tested against.
This change also optimizes QMimeBinaryProvider::addFileNameMatches
to have the same logic as xdgmime for glob matching:
literals > extensions > other globs
As soon as one category matches, we can stop there.
This makes no difference in the overall results, in practice.
The user bug report (against the Qt implementation, actually)
is https://gitlab.freedesktop.org/xdg/shared-mime-info/-/issues/138
as well as https://bugs.kde.org/show_bug.cgi?id=411718
Pick-to: 6.0 5.15
Change-Id: Ia0a34080427daff43c732609443ee6df8f41447c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Fix indentation in tst_qlockfile and remove QtTest include in
tst_qcheckbox.
Change-Id: Idf630c6337859dbcc8f644010b941bfe55bb0633
Reviewed-by: David Faure <david.faure@kdab.com>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Previously it only worked when isNull() was false, which is true for
very short lines, even though length() may be non-zero.
[ChangeLog][QtCore][QLineF] QLineF::setLength() will now set the
length if the line's length() is non-zero. Previously, it was
documented to only set the length if isNull() was false; this is a
fuzzy check, so isNull() could be true for a line with non-zero
length().
Fixes: QTBUG-89569
Pick-to: 6.0 5.15
Change-Id: I803e622ad09c85815dde25df8dd3ba6dfcba0714
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
QAbstractItemView::selectionCommand() returned the wrong SelectionFlags
when no event is given since c4366ff018.
Therefore re-add the call to QGuiApplication::keyboardModifiers() when
no event is given and add a unittest for them so it's not removed again.
Fixes: QTBUG-89711
Change-Id: I107357df08c4ff1b1a14d49523401c5e7b428f56
Pick-to: 6.0
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
[ChangeLog][QtCore][QProcess] Added support for
setStandardOutputProcess() with startDetached().
Change-Id: I61278cdb7084127f583c8c017688da392017b44c
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
[ChangeLog][QtCore][QProcess] Added support for QProcess::MergedChannels
mode with startDetached().
Change-Id: I953ad2063322015332269522a297f8e2842e438c
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
In 1947, Germany had not only a summer time but also a
"Hochsommerzeit", a high summer time. This patch adds a test
creating a QDateTime in the time gap at the beginning of this
Hochsommerzeit on May 11, 1947.
Pick-to: 6.0
Change-Id: Ib81a23914965f092c3e3195e4c7258e5a4e0b30e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Blacklist qfont tests that don't work correctly with qemu.
Task-number: QTQAINFRA-3836
Change-Id: I7f5d4b07428febb0adb82d38203226b5c56a2ad5
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
Complete search and replace of QtTest and QtTest/QtTest with QTest, as
QtTest includes the whole module. Replace all such instances with
correct header includes. See Jira task for more discussion.
Fixes: QTBUG-88831
Change-Id: I981cfae18a1cabcabcabee376016b086d9d01f44
Pick-to: 6.0
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Avoid possible memory leaks by creating the checkbox on the stack, adopt
coding style.
Change-Id: I25f8b9048c8318d2897fd942492254a036c3a706
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
After 6be398 few tests fail/crash with qtcharts.
Fix issue on reallocateAndGraw and avoid accessing
flags on invalid header.
Data::allocate can return invalid header and dataptr,
which takes place if capacity is 0. In code before 6be398
clone method checks if header is not null before resetting
flags. However after b76fbb4 resetting flags is no longer
needed since it is done in allocateGrow.
Task-number: QTBUG-89092
Pick-to: 6.0
Change-Id: I2fde781dad7a0694a5f17ab716f647c2e35f4ff0
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
It has been failing consistently, recently.
Pick-to: 6.0
Change-Id: I71b2e8857c3d5ce86ad17864c95aac7265ed9a8a
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
This adds functionality for marking properties (QProperty and related
classes) manually as dirty. This facilliates the integration of bindable
properties with non-binable properties and makes it possible for
bindable properties to change due to external events.
Fixes: QTBUG-89167
Change-Id: I256cf154d914149dacb6cadaba92b13c88c9d027
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
SIOCGIFNAME is now supported on QEMU.
This reverts commit 42b3ed763f.
Change-Id: I79caa371dc798464ab76851d2ea3189ec9eb0c57
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Remove a second argument to the setSocket(qintptr, bool) function as
it makes the API harder to understand.
Change-Id: Ib1852a4e9d96adde35bfbf0fe03b386d9ded395a
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Amend aa136d46e1 that changed qRound()
implementation to use __builtin_round() functions on ARM64 which do
not fail "round largest representable float less than 0.5" test,
unlike the simple version of qRound() used elsewhere.
Change-Id: Ic66cb0f826d91cd6a85ad72b646c79ded1c0eeca
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Fixed the following warnings:
- empty expression statement has no effect; remove unnecessary ';'
to silence this warning
- zero as null pointer constant
- no previous extern declaration for non-static variable
- use of old-style cast
- integer conversion warnings
Change-Id: Ieb31b127ce8e3b543aaf88a8e8fc463dcc8bc4e3
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Apparently some library definitions went overboard, link them directly.
Pick-to: 6.0
Change-Id: I009737f7e3edff5619241b700a627dc4e25e6018
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
After f08492c6fd was
merged this bug would manifest as an entry appearing twice
in the chain when a updating an existing entry (insert with
an existing key). This could sometimes result in crashes later
as the list filled up and the list was used in trim() to remove
various entries.
Fixes: QTBUG-89176
Pick-to: 6.0
Change-Id: Ide80160fb4317dc0aefe79eec5dce7ec6813e790
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Historic QDateTime behavior when being asked to create a
QDateTime in the DST gap was to interpret the given date
as if it was in the time before that gap, mapping it to a point
in time after the gap. This has changed with
a04411119e .
Since then, the given date is interpreted as if it was in the
time after the gap, thus being mapped to a point in time
before the gap.
This patch restores the historic behavior.
This was not caught by Coin because machines ran in timezone
"Atlantic/Reykjavik" which does not have DST since 1967.
This patch changes tests to always run in "Europe/Oslo".
Driveby: Test function "findSpring" did some operations in
local time, even though being asked to work in a specific
time zone. Fixed that.
Fixes: QTBUG-86960
Fixes: QTBUG-89208
Pick-to: 6.0 5.15
Change-Id: Iecce5898bf9711a10e7dfc0a25e4bbeaed1c8ade
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Technically, having a single constructor limits the use-cases for this
class. We should take into account that:
- an opened socket descriptor must be available at the moment of
construction;
- the constructor unconditionally enables the notifier (the possible
solution
notifier = new QSocketNotifier(...);
notifier->setEnabled(false);
is suboptimal due to heavy operations inside the event dispatcher);
- for these reasons, QSocketNotifier most often cannot be a member of
another class (we have an extra allocation and indirect access).
This patch addresses this shortcoming by making it possible to set the
socket descriptor at a later point:
[ChangeLog][QtCore][QSocketNotifier] Added setSocket() and an additional
constructor which requires no socket.
Change-Id: I2eb2edf33ddafe99e528aac7d3774ade40795e7a
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Added overloads of .then()/.onFailed()/.onCanceled() which take a
pointer of a context object, and invoke the continuations in the
object's thread.
Task-number: QTBUG-86794
Change-Id: I0f3cbb0500695673fc4087af5d4b96b416e3e1ce
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Leena Miettinen <riitta-leena.miettinen@qt.io>
QTableViewPrivate::heightHintForIndex()/widthHintForIndex() did not
honor spans and therefore returned too big values.
Fixes: QTBUG-89116
Change-Id: I52948902b7eaaa27c092ed39da68950c3840e8e4
Pick-to: 5.15
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
/dev/zero and /dev/null are expected to always be present in any system
(even containers). Unlike /dev/null, you *can* read from /dev/zero so
test that QIODevice doesn't think it is random-access because of that.
/dev/tty is also always present but has an interesting semantic. Could
also try /dev/full, /dev/random and /dev/urandom.
Change-Id: Ia2aa807ffa8a4c798425fffd15d84b60573f2c26
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
This is the most basic way to represent custom transfer functions.
Change-Id: I529fb647ece82c03e85ef77b056d9daf13fe5a61
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
Otherwise, it would report that lastIndexOf of an empty pattern
in an empty string doesn't exist. Next commit adds extensive autotests;
for now, disable a broken autotest (which already features a comment
about why it's broken).
Change-Id: I9a0e5c0142007f81f5cf93e356c8bd82f00066f7
Pick-to: 5.15 6.0
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
There's an assertion. Found by Google fuzz scan of CBOR data.
Pick-to: 6.0 5.15
Change-Id: I55083c2909f64a1f8868fffd164f1ff3af71605b
Reviewed-by: David Faure <david.faure@kdab.com>
There is an off by one in the implementation of count(): a match
must be attempted even at the very end of the string, because
a 0-length match can happen there. While at it, improve
the documentation on the counter-intuitive behavior of count(),
which doesn't merely count how many times a regexp matches
into a string using ordinary global matching.
[ChangeLog][QtCore][QString] Fixed a corner case when using
QString::count(QRegularExpression), causing an empty in the
last position not to be accounted for in the returned result.
Change-Id: I064497839a96979abfbac2d0a96546ce160bbc46
Pick-to: 5.15 6.0
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
test_QFINDTESTDATA is a test which is built and run in the source
tree. It tests usage of relative paths of the Ninja generator, which
only occurs when building in the source tree, so this test cannot
be done outside of the source tree.
Developer's expectation is, however, that an out-of-source build
does not change the source tree. Having "git status" showing
differences after running the tests is irritating. This patch removes
the in-source build files after executing the test.
Change-Id: Ia9fd368c9d54b97a415b63254b45e17bc95ecf45
Reviewed-by: Craig Scott <craig.scott@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
When an eager binding triggers a setBinding call, we end up with a
special kind of binding loop:
setBinding() -> evaluate -> notifyObserver
^ |
| /
----------------------------
We now catch set condition, and set the binding status to BindingLoop
(with a distinct description).
Task-number: QTBUG-87153
Task-number: QTBUG-87733
Pick-to: 6.0
Change-Id: I9f9915797d82eab820fc279baceaf89d7e5a3f4a
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
tst_QLineEdit::QTBUG13520_textNotVisible checks that text is visible
if a QLineEdit is set to Qt::AlignRight. To do that, it writes
some text into a line edit and checks afterwards that the first
character is in the left half of the window. This fails if the window
is larger than twice the length of the text used and thus might fail
in multiple situations where Qt is not in full control over the size
of the windows created, as is the case with tiling window managers.
This patch changes the test to not check for the first character in
the left half of the window, but instead check for the first character
be approximately at the expected position.
Pick-to: 6.0
Change-Id: I18f6de356ea20f4744f3a58cd2b1d76f6a9545a4
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
cborlargedatavalidation.cpp:93:60: warning: format ‘%llx’ expects argument of type ‘long long unsigned int’, but argument 2 has type ‘qsizetype’ {aka ‘int’} [-Wformat=]
93 | QTest::addRow("bytearray-too-big-for-qbytearray-%llx", v)
| ~~~^ ~
| | |
| | qsizetype {aka int}
| long long unsigned int
| %x
The cast to size_t is required to make the 64-bit not complain due to
the long vs long long difference.
Pick-to: 5.15 6.0
Change-Id: I00b01c01a66748508ea1fffd164a9add2a2650cf
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
I don't know which of the previous commits caused this: as far as I can
tell, this test should never have passed.
Pick-to: 5.15 6.0
Change-Id: I55083c2909f64a1f8868fffd164e7e8c24eec1f8
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Because CBOR strings are encoded in UTF-8, it's possible that the string
that won't fit a QString in UTF-16 would still fit QByteArray in UTF-8
(e.g., anything US-ASCII and most Latin text).
The previous solution was an improvement because we used to read into a
QByteArray then convert the QByteArray to QString, thus using 3x the
amount of memory (1x in QByteArray, 2x in QString). The previous commit
skipped the middle allocation and made the regular readString() function
do the decoding either directly on source memory or by reading in small
chunks (16 kB).
Future improvement for Qt 6.1: add readStringChunk(char16_t *, qsizetype)
so we can do the validation / skipping at O(1) memory.
Pick-to: 5.15 6.0
Change-Id: I7b9b97ae9b32412abdc6fffd1645458c655cc566
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Looking at grafana it rarely fails in dev so unblacklisting it.
Though it is a little more flaky after switching to http 2 by default
because then we only have one channel and more requests end up queued in
the same channel, which will get errored out when the server
disconnects.
Task-number: QTBUG-88943
Change-Id: If5d6335864ce6bbc35f519b2c6d7068e4181afd2
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
headFromHttp hasn't been flaky since 5.14 times according to grafana,
does not fail locally.
Same situation with ioHttpRedirect as above.
ioHttpRedirectMultipartPost has not failed on Windows since october
2019, assumed stable now.
backgroundRequestInterruption no longer exists.
ioPostToHttpFromSocket would fail in debug MSVC builds but was
fixed in 710886fbdd.
Task-number: QTBUG-88943
Change-Id: Ida640179ef15a3452291745e4e94a71a385f57ae
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
The intention was always that you can define properties that do
not require a changed signal. But having to explicitly pass
a nullptr as signal parameter into the macro is ugly, so
use the cool QT_OVERLOADED_MACRO to make it optional.
Pick-to: 6.0
Change-Id: I0ce366d043850f983c968d73c544d89933c48df9
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Similar to the previous commit which applied to QCborStreamReader, don't
allocate too much data before checking that the stream actually has that
much.
Pick-to: 5.15 6.0
Fixes: QTBUG-88256
Change-Id: I7b9b97ae9b32412abdc6fffd16454b7568a063ba
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
By calling the internal readStringChunk() function with a QByteArray
pointer, QCborStreamReader::readByteArray() can now avoid allocating the
resulting buffer until the internals have confirmed that there is
sufficient data in the incoming buffer. As a result, we first detect the
EOF condition before we conclude the payload would have been too big for
QByteArray (validation()) test. Meanwhile, the hugeDeviceValidation()
test ends up with a few conditions where it would have copied 1 GB of
data, so limit that too.
We make a choice of reporting OOM vs DataTooLarge only if QByteArray
fails to allocate in the first place (QByteArray::resize() ->
Q_CHECK_PTR -> qBadAlloc, QtCore is always built with exceptions on).
The QCborValue unit test needed a temporary work around until we apply
the same allocation fix (see next commit).
Pick-to: 5.15 6.0
Fixes: QTBUG-88253
Change-Id: I7b9b97ae9b32412abdc6fffd164523eeae49cdfe
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Previously a default constructor was required for the result type
of mappedReduced() and filteredReduced(), even if a default value
was provided.
This patch fixes the problem.
The issue was in the ResultReporter type, that was calling
QList::resize() to adjust the size of expected reported results.
A default-value parameter was added to the class, so that
a corresponding overload of QList::resize could be invoked.
Task-number: QTBUG-88452
Change-Id: I51113753e314d76aa74d201b5a7e327a6ca75f47
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
QColors were not premultiplied before being set.
Pick-to: 6.0 5.15 5.12
Change-Id: Id3765b6932a72374ddfd788fae4bb628a4edf0b7
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Just like it was done in the .pro file.
Pick-to: 6.0
Change-Id: I7def52127f4bab6f0ef490ac7eee2de2da479352
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
If a QBindable is created from a computed property, it is not possible
to actually set a value or a binding. If we try to do it anyway, we'd
get a crash. Thus we now check whether the function pointer is null
before invoking it.
Pick-to: 6.0
Task-number: QTBUG-87153
Change-Id: I5bedb9080ccf79d9b8166b80d5733d095ed76f8d
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
The hash and equality operators used need to be consistent with
each other. Unfortunately, QPMI::operator==() is not suitable to do
this. So specialize qHashEquals() for QPMI.
Fixes: QTBUG-88966
Change-Id: If5f19a722ae9fc4e78e93537e7ea15726f148768
Reviewed-by: Jarek Kobus <jaroslaw.kobus@qt.io>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
(cherry picked from commit 83e95956ed58e88b11e2cc3cb61c5beacb7985db)
Reviewed-by: Qt Cherry-pick Bot <cherrypick_bot@qt-project.org>
Amend 53b7cb1bd7, match() is only used
to provoke data races.
Change-Id: Id20b11fedf7f20e74baab15bbb60c995c1a0c794
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
It was previously untested
Task-number: QTBUG-88183
Pick-to: 6.0
Change-Id: Icc59fc632957a75cac8c7f5e2a1aed88a1c9ff9d
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
The test in general is fine, but it was making an assumption that the
first 5 readyRead emissions would never result in the whole message
being received. In certain scenarios with slowdown however it was still
possible that we would receive the whole message after just a few
readyReady emissions. While I didn't check it's most likely due to a
mechanic in the QNetworkReply machinery where we suppress some
emissions if we know there's more data just about to be available.
Task-number: QTBUG-88943
Change-Id: I0cf06edb34d4e86cc8a42c0f1cd7e8c35765f6ee
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
It's not _wrong_ to time out when connecting to something unreachable
(it's just a different way of handling it) so we shouldn't fail when
this happens either.
In local testing (windows) it times out after 8 seconds, so bump
the timer to 10 seconds. On systems where it's faster there'll be
no difference as long as things don't go wrong.
Pick-to: 6.0
Fixes: QTBUG-89089
Change-Id: I8437cf8e4fbecedea2391ed87fdce1213085b964
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Add test for qRound that covers some edge cases for rounding. Note that
as of right now, this test fails and the docs have been updated to warn
that it should not be depended on for strict correctness.
Change-Id: I1a61bca47abd77855fe7c13ded44e913cc7e8722
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Which contains a lot of 'macos'/'osx' black-listed auto-tests. They
mostly fail with SecureTransport (on BigSur) because SecTrustEvaluate()
does not like our old certificate. Instead, since SecureTransport
is deprecated anyway and we are not planning to develop it in future,
skip the related auto-test depending on QT_CONFIG(securetransport).
Task-number: QTBUG-88943
Change-Id: I5f6cb7b2d0ea15c445603c1ff3e1700f123c28d1
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
It was blacklisted due to the issue there. The issue is resolved, but
the blacklist stayed.
Task-number: QTBUG-88943
Change-Id: I7d9a660a17c1463dd8b654752ed5787fe5f5af24
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
If the first font in the families list happens to have been
disambiguated because of duplicates, two things went wrong:
1. hasFamily() would return false for the font family, because
it does not disambiguate when checking for the family name and
only checks if the families list contains the exact string.
2. Adding aliases to the full disambiguated string is not supported,
only the family name.
The first issue has been reported separately as QTBUG-89068.
The test failure is fixed by just avoiding the fonts that
are ambiguous in the test, as it really doesn't matter which
font we pick.
Fixes: QTBUG-89008
Pick-to: 5.15 6.0
Change-Id: I829778c2e7bb6090475c34dcf9cdce58862729d6
Reviewed-by: Liang Qi <liang.qi@qt.io>
Use a trick similar to the one we use for their ranged
constructors: support predicates that either take a
container's iterator, or that take a std::pair (for STL
compatibility).
[ChangeLog][QtCore][QMap] Added removeIf() and erase_if().
[ChangeLog][QtCore][QMultiMap] Added removeIf() and erase_if().
[ChangeLog][QtCore][QHash] Added removeIf() and erase_if().
[ChangeLog][QtCore][QMultiHash] Added removeIf() and erase_if().
Change-Id: Ie40aadf6217d7a4126a626c390d530812ebcf020
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The requests will remove themselves once they get deleted
but since the deletion is done through a _queued_ invokeMethod
to 'deleteLater' we will call
QHttpNetworkConnection::_q_startNextRequest first which may
end up starting a reconnect of the TCP socket which we had the error on.
In this specific instance it manifested as a race condition where we
either don't get a proxyAuthorizationRequired signal at all (it was
emitted while we didn't have any valid replies), or we get the signal
emitted too late and it gets emitted on whatever the next reply was.
Task-number: QTBUG-88417
Pick-to: 5.15 6.0
Change-Id: If3f8ececc5550f1868c90124559cb8e3029646d8
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
We already have all we need in QHash to support this, so the addition
is simple enough.
Add test checking how many copies and/or moves are needed for a single
insert.
As a drive-by: remove some unneeded static_cast
Change-Id: Iaf768657644afa45f78f5c81ffcf89ba9607be96
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
In preparation for the next changes.
Change-Id: Ibe0635dfa040842073749aa3e2ae140f27dc983a
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Add QMetaType::hasRegisteredDataStreamOperators() to complement
the method to check whether a data stream operator exists.
Fixes: QTBUG-82916
Change-Id: Ib2f841131b7c401d5a3ae76d49104e41697c4eac
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
QHeaderView sorting may be triggered when the user performs
some mouse interactions that should really not result in sorting.
Generally speaking, this happens when the user:
* presses on a non-movable section (A)
* moves on another section (B)
* releases on that section
resulting in B becoming sorted / flipping sorting.
(Non-movable is required, otherwise dragging would cause section moving,
not sorting.)
To make the matter worse, QHeaderView doesn't check that the release
happens within its geometry. This makes sense when moving sections: one
is able to drag a section horizontally/vertically even if the mouse
leaves the QHeaderView.
But when not moving sections, this means that one can
* press on section (A),
* move the mouse anywhere vertically (for a horizontal bar, mut.mut
for a vertical) above or below another section (B), that is,
outside QHeaderView's geometry
* release the mouse
and cause B to be sorted.
Fix it by
1) remembering which one was the section that the user originally
clicked on; that's the only one that can possibly become sorted
(if we're not moving and other conditions hold). No other variable
seemed to remember this.
2) on release, check that it happens within that section's geometry.
If so, sort.
Pick-to: 6.0 5.15
Change-Id: Icfb67662221efbde019711f933781ee1e7d9ac43
Reviewed-by: Christian Ehrlicher <ch.ehrlicher@gmx.de>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Avoid spurious bindings by resetting the binding state before calling
the setter of eager properties.
Fixes: QTBUG-88999
Pick-to: 6.0
Change-Id: I1e3b5662307d906598335a21d306be9c606529d4
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Currently untested
The socks case is odd: after accepting the first connection it shows as
unconnected. Details as for why is unknown, out of scope of adding this
test.
Pick-to: 6.0
Change-Id: I0e7658f23b89f3af8db379b001ee33a844f3bec4
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
It didn't initially have tests. To avoid relying on realizing
breakage implicitly through other classes we'll just add tests instead.
Task-number: QTBUG-88183
Pick-to: 6.0
Change-Id: I7449dc1f9a118d4b7a8158a2c34563dbd9c43c66
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
