Before this change, the QMetaType for T const* where T is derived from
QObject would not store the static QMetaObject of T. This commit changes
this. As a consequence, the metatype system can now convert between
const and non-const pointers to QObject. Note that this allows casting
const away; but so does C++ with const_cast.
In addition, a new flag, QMetaType::IsImmutable is introduced, and used
to tag the metatypes of pointer to const types. This allows code to
discern between pointers to mutable and const QObjects, which is
relevant for the QML engine.
Task-number: QTBUG-82354
Change-Id: I3e4e4f39f565bd99a65e161528ce5304df73d6d6
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
After QPoint(F), it's now the time of QSize(F) and QVectorND,
which can be unambiguously decomposed.
[ChangeLog][QtCore][QSize] QSize is now usable in a structured
binding declaration.
[ChangeLog][QtCore][QSizeF] QSizeF is now usable in a structured
binding declaration.
[ChangeLog][QtGui][QVector2D] QVector2D is now usable in a
structured binding declaration.
[ChangeLog][QtGui][QVector3D] QVector3D is now usable in a
structured binding declaration.
[ChangeLog][QtGui][QVector4D] QVector4D is now usable in a
structured binding declaration.
Change-Id: I67bb152f4210f2be27607179cd2ec522174cc483
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
When attaching a continuation with the default (QtFuture::Launch::Sync)
policy, it will be launched in the same thread where the parent has
been executing, or in the thread where the parent lives, if the
continuation is attached after the parent has already finished. Fixed
the test-case to make sure the continuations are attached while the
parent is still running, so that they can be resolved in the parent's
context.
Fixes: QTBUG-91373
Pick-to: 6.1
Change-Id: I82b3b0c47b76d121b44bd512659c08b3b474e351
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Reviewed-by: Jarek Kobus <jaroslaw.kobus@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
In QTimeZonePrivate::dataForLocalTime(), mistrust the Android
backend's hasDaylightTime(), as it has a comment saying it only knows
about future transitions, not past. This caller of it really needs to
query "has ever had a transition", which this doesn't answer. Many
zones that have no plans for future transitions have had transitions
in the past; these were failing the transitionEachZone() test.
In the process, refine the test itself, making sure we catch some
quirk cases that shouldn't arise and making the debug message on
failure more informative (while eliding the zone name, as this is part
of the test name anyway, so added to the output by qDebug() itself).
Fixes: QTBUG-69131
Change-Id: I88a0528182c247acb8b6327b40516178e455bcc0
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
We haven't used the spawn functionality on QNX since Qt 5.7 (commit
005a8bfbf0) because that's when we dropped
support for QNX 6.5.0.
Change-Id: Ic90d8429a0eb4837971dfffd1664f9712bdce2d8
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
And set *pid to -1.
[ChangeLog][QtCore][QProcess] If a startDetached() fails to start the
target application, the QProcess object should now have a proper error
string in errorString().
Pick-to: 6.1
Change-Id: Ic90d8429a0eb4837971dfffd1664e825ffcb923e
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
That qWarning cannot be in the child process (we don't know if a user
logger is fork-no-exec-safe) and the failure to chdir() should be
reported as a failure in QProcess::startDetached() instead.
Change-Id: Ic90d8429a0eb4837971dfffd1664e7577c81610b
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Reviewed-by: David Llewellyn-Jones <david.llewellyn-jones@jolla.com>
I get a warning about the variable t_var being set but not used.
This patch fixes the warning.
Change-Id: Ib2df5ed2dddd283eb87f71a8b85951d1f67f04f2
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The QTimeZone tests have some helper functions to test details of a
QTZP instance; these use QCOMPARE(), so may return early on failure.
The callers then need to notice the failure and, in their turn, also
return.
Change-Id: I0a188e9641ced70c9ffedd95e91f39681fad768a
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Its back-end lacks transition data, so the test can't possibly
succeed. Make the skip conditional on the tested zone having
transitions, so that the test will come back into play if we ever gain
support for transitions on Android.
Fixes: QTBUG-69129
Change-Id: Ie4f96601b8b18cd496efbde7cf2557875cf3c1c9
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
A recent change ( a7ca8b1a28 )
led to failure of binding removal in setInterval().
This was fixed by introducing setterScope.
This patch add unit tests for this regression.
Change-Id: Ic8da1f2d82ad6c8ccd81c9b1eff72d42cf75f28a
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Apparently we used to have (back in 2007, only on Windows,
incompatibly with what we were then using on Unix) a TextDate format
(only for QDateTime, QDate used what it still uses) that put the
day-of-month number, with a dot after it, before the month's short
name. We have retained parsing of this format, on all platforms, ever
since.
It no longer matches the format we now use (since 5.2, in 2013, commit
61b56a89a1, which harmonised the format
with Unix and QDate); now seems like a good time to stop complicating
our parser for its sake.
[ChangeLog][QtCore][QDateTime] The parsing of Qt::TextDate in
QDateTime::fromString() no longer supports the old TextDate format
used (only) on Windows by Qt < 5.2 ("ddd d. MMM yyyy" with an
"HH:mm:ss" time either appended or inserted before "yyyy").
Change-Id: I73a798ab78f187543e415119cc4a11f1cfd73820
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Since fromString() can't parse the (ambiguous at the best of times;
also backend-dependent and thus potentially system-locale-dependent)
abbreviations currently produced (since 5.9) and can parse UTC-based
offsets, the OffsetName of the zone is a more robust format for the
zone-suffix. This also makes it possible to consistently use the C
locale, compatibly with everything else about post-6.0 date-time
serialization.
[ChangeLog][QtCore][QDateTime] When spec is Qt::TimeZone, the
offset-suffix now used for the toString(Qt::TextDate) format is now a
UTC-based offset string, compatible with the parsing (now) supported
by fromString(). The zone-abbreviation suffix in use since 5.9 was not
parseable.
Change-Id: I4024ae87980c6d3590c68a67b8d1c8f433e36855
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
There are GMT-offset zones whose convention for the sign of the offset
is the reverse of what we are (still) using, which is the usual
convention for UTC-offset zone: for example, the Olson Database's
Etc/GMT+3 has offset -3 hours in the UTC-based system we use, so we
give it suffix GMT-0300. The UTC-based suffix is also what we use as
the abbreviation for OffsetFromUTC() in toString().
For now this only adds support for parsing a planned future form: the
old form using GMT is retained, to give client code some chance to
prepare for a backwards-compatible transition. Although the GMT prefix
is matched case-insensitively, only match UTC if fully upper-case;
there is no meaningful precedent for case-insensitive usage here.
[ChangeLog][QtCore][QDateTime] The Qt::TextDate format now recognizes
UTC-based offset suffixes in addition to suffixes based on the
deprecated alias GMT. This prepares for toString() to use such
UTC-based suffixes for time-zones (fromString() cannot parse the
present abbreviation suffix). A future release of Qt shall use
UTC-based suffixes in place of the present GMT-based suffixes (which
conflict with GMT-based IANA zone names) for Qt::LocalTime and
Qt::OffsetFromUTC time-specs. Client code is encouraged to use and
recognize UTC-based zone suffixes in preparation for that transition,
unless compatibility with versions before 6.2 is required.
Change-Id: I5a42a488f1232a30f4b427b7954759283423b9b3
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The emulation detection has been usable only on qtbase tests, move it to
QTest so that it can be used in other modules as well.
Pick-to: 6.1
Change-Id: I4b2321b7856414d7b1cfd5e6b1405a633c6bb878
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
It's the QScopedPointer test, so we want to test deprecated APIs.
Change-Id: I029103b3150c576cba9b395aafc571b9fccc914a
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Instead of an XFAIL, actually test what we expect will happen for the
test, namely that the milliseconds will be lost. In the process,
verify that milliseconds since epoch also matches what was expected,
change an "expecting empty" condition to check for the "invalid"
test-case to which it's actually relevant and note that this test-case
shall need amended when we update our ISODate support to the 2019
update, which extends the year range.
Task-number: QTBUG-56552
Pick-to: 6.1 6.0 5.15
Change-Id: I680aa31ee0dcc8fadabb5d4cd6c083a8afd48573
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The test verified that a LocalTime's time since Epoch changes when the
system time-zone changes. This works when the QDateTime object is in
short form and recomputes its offset from UTC every time it is needed,
but fails with a pimpled QDateTime, as this caches its offset from UTC
when it is created, saving the recomputation which - in the far more
usual case where the system time-zone does not change in the lifetime
of a QDateTime object - would normally produce the same result.
Changed the test to use a newly-created QDateTime constructed with the
same parameters, which doesn't have the cached out-of-date knowledge
of its zone offset. Removed the XFAIL. Made the test data-driven and
added test-cases: one so close to the Epoch that it should be short
even on 32-bit systems, one so far that it's pimpled even on 64-bit
systems (used in reproducing the issue in order to debug it).
This then revealed that Android 5 doesn't seem to support the POSIX
zone IDs used by this test, so it now verifies that LocalTime has the
expected offset from UTC after zone changes, QSKIP()ping if not.
Documented that the behavior of LocalTime is undefined after a change
to the system time-zone. Cleaned up the existing doc of Qt::TimeSpec
in the process.
Fixes: QTBUG-89889
Pick-to: 6.1 6.0 5.15
Change-Id: I1058f47a1ff3ee1c326f3579ac80bd8bab242e28
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The initial implementation and the commit
c00ab6f8ea was wrong:
* env->findClass() in fact returns a global reference, and in any
case we shouldn't be calling that, instead QJniObject would be
enough.
* The size param provided to env->RegisterNatives was wrong.
* A test for registerNativeMethods() is added to ensure such break
is not repeated again.
Task-number: QTBUG-89633
Pick-to: 6.1
Change-Id: I4d3a6a9270755f465c40add25521fb750dd4de0a
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
The system locale of a macOS application is not affected by environment
variables like LANG. Yet, we were reporting a name determined from
environment variables as the fallbackUiLocale(), rather than one based
on the language and country of the actual system locale.
This lead, via the usual CLDR likely-subtag fallback, to claiming the
system locale's name, language, script and country were those obtained
from these environment variables, even when they were at odds with the
actual locale being used by the system, which was being used for some
queries.
Worse yet, any data not supplied by these queries was being obtained
from the same CLDR locale as the name, making for an inconsistent mix
of locale data.
While we cannot avoid the likely-subtag fallback step for fallback
data, it is more consistent to use the actual system locale's name
as start-point for that fallback.
At the same time, add support for the language, script and country
queries, so that the QLocale::system() describes itself faithfully,
instead of claiming to be the locale that results from that fallback.
If we want to support LANG or other environment variable overrides,
they should be handled by the layer above the system locale, by
changing the default locale of the Qt application, as if the user
had called QLocale::setDefault().
[ChangeLog][QtCore][QLocale] QLocale::system() on macOS no longer
pretends to support LANG or other environment variables as overrides,
as this is not a feature that the system locale on macOS supports.
To override the locale of an application, use QLocale::setDefault(),
or pass -AppleLocale en_US.
Fixes: QTBUG-90971
Change-Id: Ibdaf5ff9a2050f61233a88eabf3c29094f7757f1
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Previously the only test was that it produced no warnings,
if anyone paused to read the output to notice them.
Change-Id: I225ca99c7ec316186702c0fdb355585374c014a4
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Somehow QList::fill(t, newSize) introduced a regression in Qt6:
when newSize < QList::size() we should resize to the newSize.
This is aligned with QVector::fill() in 5.15 and std::vector::assign()
While 6.0 is already out, picking it to 6.0.x could save someone who
haven't migrated yet as well as fix some accidental bugs in Qt's code
[ChangeLog][QtCore][QList] Fixed QList::fill() regression introduced in
6.0: calling fill() with size < current list size wouldn't truncate the
list
Fixes: QTBUG-91042
Pick-to: 6.0 6.1
Change-Id: Ic166e2c5e42390b61df1030f7c705e344433f7f2
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
gcc 9 consumed enourmous amounts of memory building the test, regularly
dying on a VM with 4GB RAM. Splitting it up helps.
As a drive-by, use inline static variables, and rename the header used by
other tests to tst_qmetatype_common.h.
Change-Id: Ib716d8e3506aac6c87845e57b04cb1a4f6c68387
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Amend ac970d48fd and use
QEXPECT_FAILURE for systemTimeZone test on 32bit systems.
Task-number: QTBUG-89889
Change-Id: I0eed35df871c69a20bcd7c544fc0e9a48dd8db7b
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Dating from the origins of our support for the zoneinfo file format,
the mapping of POSIX's day-numbering (0 = Sunday through 6 = Saturday,
see [*]) to Qt's (1 = Monday through 7 = Sunday) was done by mapping 0
to 1, when it should have been 7.
[*] http://www.gnu.org/software/libc/manual/html_node/TZ-Variable.html
Corrected a QTimeZone test that trusted the results it got without
checking which day of the week those were: they were all Mondays.
Verified that the corrected dates are in fact Sundays.
Checked the zone abbreviations, too.
Fixes: QTBUG-90553
Pick-to: 6.0 5.15
Change-Id: I84b4b14f9892ff687918cd3c42c7c9807e45313c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Introduction of QObjectCompatProperty requires every write to
the property to be examined whether it is OK or should be replaced
by a setValueBypassingBindings/markDirty combination. The existence
of operator= make this difficult as it is easy to miss places where
it is written. By not having operator=, we can help developers
make sure they had a conscious decision about each write to the
property.
Change-Id: Ia61ea4722eb0bab26ce7684b85dd03d710cd1751
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
This reverts commit 8f8405e046.
Reason for revert: Appears not entirely thread-safe and caused QTBUG-90705
Change-Id: I390c0b1a555a18e6a095b52010371d017071e26b
Fixes: QTBUG-90705
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
This is in line with QML where
import QtQuick 2.15
Rectangle {
width: 100
height: 100
color: "red"
Rectangle {
id: inner
x: 10
y: x
width: 50
height: 50
onYChanged: { console.log("hey"); inner.x = 10}
TapHandler {
onTapped: inner.x = 20
}
}
}
results in a binding loop warning when the tap handler triggers. While
the change handler would only run once, we cannot statically determine
if we need to loop once, twice, or if there actually is a diverging
loop. Thus we unconditionally warn about the binding loop and stop
executing the binding.
As a drive-by, verify in the related test that a change handler which
overwrites its properties binding itself removes the binding.
Change-Id: I5372019c2389ab724c49cd7489ecbd3ebced1c69
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
As part of Qt 6 restructring for the extras modules, this change exposes
the Jni APIs which are very important for Android platform. This patch
adds the APIs QJniObject, QJniEnvironment, QJniExceptionCleaner based
from private QtCore and QtAndroidExtras.
The Jni interface is cross-platform which justifies the name, but
currently, this API is used mainly for Android, and the naming comes
generic without Android keyword to avoid any future limitation on
supporting other platforms.
[ChangeLog][QtCore] Add new QJniObject, QJniEnvironment and
QJniExceptionCleaner APIs.
Task-number: QTBUG-89482
Fixes: QTBUG-89633
Change-Id: I4382dd53a225375759b9d042f6035a4a9810572b
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
We missed takeBinding as a supported operation on Q(Untyped)Bindable.
To avoid adding version checks to code dealing with QBindableInterface,
we simply synthesize takeBinding as a combination of binding to retrieve
the binding and setBinding with a default-constructed
QUntypedPropertyBinding.
Change-Id: I43803a0dfe210353d0235f0373d2257f75ffe534
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
We have plenty of places where we add some squares and take a square
root; this may be done more accurately and faster by hypot().
Introduce QHypotHelper to handle hypot with more than 3 parameters,
and with 3 when the C++17 version is missing (which it never should
be). Include an overload taking arbitrarily many valus and ensure that
we can use qHypot() with qfloat16. Illustrate with some example uses,
add some tests.
[ChangeLog][QtCore][QMath] Header <QMath> now provides qHypot(), an
implementation of std::hypot() taking arbitrarily many numeric values,
including support for qfloat16, while avoiding the overflow and
underflow problems that arise when naively taking the square root of a
sum of squares.
Change-Id: Ia4e3913fe83fc27d17d8e7f1a52f03ad445c1fed
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Ported all properties, except activeThreadCount. Marking it dirty may
cause a re-evaluation of properties depending on it, which may reault in
a deadlock in case of trying to read activeThreadCount property which is
being marked as dirty.
Task-number: QTBUG-85520
Change-Id: Id073b0895c89a9e6b05b57ad520db994e550a1c9
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
- Add move constructors to QRegularExpression, QRegularExpressionMatch
and QRegularExpressionMatchIterator.
- Update the documentation to explicitly state that only destructor
and assignment operators can be called for a moved-from object
Task-number: QTBUG-86634
Change-Id: I06b4f54e300541033a9a18339c97338717a06da0
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Alex Blasche <alexander.blasche@qt.io>
Make stricter alignment requirements for the allocated header
This strict alignment allows reallocateUnaligned() to property account
for the padding occurring in cases when
alignof(QArrayData) < alignof(T) <= alignof(std::max_align_t), which
happens to be the case on e.g. 32-bit platforms with specific alignment
requirements.
This adds 4 bytes (the difference between alignof(std::max_align_t) and
sizeof(QArrayData)) of overhead for QString, QByteArray and certain QLists
on 32-bit systems.
Task-number: QTBUG-90359
Pick-to: 6.0
Change-Id: I8176a4cc79f100ee772b09425e88fe8ff3ae226a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
This complements patch a148c7b5d71d244, where languageToCode(),
countryToCode() scriptToCode() methods were introduced, with matching
codeToLanguage(), codeToCountry(), and codeToScript() methods.
This allows us to remove the use of private Qt Core API in Qt Linguist.
[ChangeLog][QtCore][QLocale] Added static codeToLanguage(),
codeToCountry(), codeToScript() methods that convert ISO code strings
to the respective enum values.
Change-Id: If5c0843a718c006ade086a6f74ceb86ac6e0fce4
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Qt is now always built with CMake.
The "cmake" keyword for QtTest blacklists remains for now. Removal is
tracked in QTBUG-90545.
Change-Id: I0011d56176a07c82698b2eb9aa330e77efa6cd34
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
To optimize certain operations, it can be useful to know whether we are
currently evaluating a binding. For instance, we have properties whose
storage is only alloctaed on-demand when they are set. However, we would
also allocate them if they are used in a binding context, as we would
otherwise not properly track the dependency. Using
isAnyBindingEvaluating in the getter, we can detect this
situation, and avoid the allocation if it returns false.
This API is private for now, as it exposes some internals of the
property system and should be used with care. As it needs to access the
TLS variable, it also has a non-negligible cost.
Change-Id: I373aabee644fe7020b2ffba7d6a0ad9a1e1b4ec0
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
The timeout defaults to 0, give it 5s.
Pick-to: 6.0
Change-Id: I975810a1ecee8bb8b3a3f143f1379a9a09589a40
Reviewed-by: Alex Trotsenko <alex1973tr@gmail.com>
The test has been failing frequently, recently.
Pick-to: 6.0
Change-Id: I3ae00a64f67e4b6a0b5ade0c660805f4d12f8317
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
