According to the CMake documentation, IMPORTED_TARGET should be
specified before the moduleSpec, and after QUIET.
Additionally, double-quote the moduleSpec everywhere, since before, it
was only quoted in some cases.
While this is not required for pkg_check_modules to work, it unifies the
coding style.
Pick-to: 6.5
Change-Id: Ic8ad708a8146f9b39ee40e9a719412441e231452
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
When encountering a batchable target, only add its defines to the
sources that the target contains. Otherwise, the defines interfere
with other tests in the batch.
Fixes: QTBUG-109848
Change-Id: I35d1665d29bb0ce93b82059f7f3b715070539d21
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
Set the RUNTIME_OUTPUT_DIRECTORY for configure-time executables so
executable will be located inside the QT_BUILD_DIR. This allows to
re-build syncqt and make sure ithat ts binary is replaced and located
in the libexec directory.
Comment on how to rebuild syncqt. Configure-time tools reserve the
original tool name for the imported executable. To re-build syncqt use
'syncqt_build' target.
Task-number: QTBUG-109792
Change-Id: Id7d912b1d75d18d82cb2a69fbd62b89440120d78
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
All current modules are free of qAsConst, make sure new ones will be,
too.
Change-Id: Iae3c67bca86eddf62ae664b00ff39a9b513d7290
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
qt-cmake-standalone-test uses add_subdirectory call when evaluating the
project. This leads to an error if users try to use path to
CMakeLists.txt as an argument, instead of directory when configuring
standalone tests with qt-cmake-standalone-test. It makes sense to check
if the user-specified path points to CMakeLists.txt and cut the
filename part when calling add_subdirectory.
Pick-to: 6.5 6.4 6.2
Change-Id: I6b9ac0ca8323eaf11f219eb1e6bed3057120a231
Reviewed-by: Amir Masoud Abdol <amir.abdol@qt.io>
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
...to 'name'.
It's clear from the context that this is the name of a module.
Pick-to: 6.5
Change-Id: I07700a4413ceb12695c153e16d0a2dcded615d11
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
syncqt arguments contain full paths and may exceed the supported
command line size on some platforms. Use a single rsp file to pass
all arguments to syncqt.
Added the missing end-of-line terminators for error messages.
Pick-to: 6.5
Change-Id: I60ad0f6770458d5256e67f042a63a3c16cd5ecb5
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
Make options for enabling "simd128" and "exceptions" public:
-feature-wasm-simd128
-feature-wasm-exceptions
Make sure both appear in the config summary and feature
list. Move the exceptions code so that they are next to
each other in the cmake file.
Pick-to: 6.5
Change-Id: I3975b56703f40f7ffff270754535bc2eb5bfe488
Reviewed-by: Mikołaj Boc <Mikolaj.Boc@qt.io>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Qt 6.5 will require emscripten 3.1.25. This is not the
most recent version (3.1.27 at the time of writing),
however .26 and .27 make changes to stack layout and size
which require further investigation.
Change-Id: Ibe285ef160d450d6b2c63a7fb71d3561b0032e37
Reviewed-by: Aleksandr Reviakin <aleksandr.reviakin@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Lorn Potter <lorn.potter@gmail.com>
This makes sure the browser only uses a basic password store and
doesn't try to do anything fancy with the OS pass store, since it
causes an issue on opensuse (kwallet isn't set up in CI).
Change-Id: Ib48a15f4834fa9bb26cf8cf3fff9bb4d0fd0238a
Reviewed-by: Mikołaj Boc <Mikolaj.Boc@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Static Qt builds are not covered by BC guarantees, but since all
'libraries' are linked into a single executable, we face in all users
of the library the same ODR violation that we faced within the
implementation DLL: we can't define the same symbol as inline in some
TUs and out-of-line in others.
In the past, we decided to always inline in static builds, but that
breaks users which, by Hyrum's Law, have come to depend on the
non-existent BC guarantees for static Qt builds.
By switching to never inline¹ in static builds, we restore BC for such
users. The performance issues should be minimal, since LTO will anyway
inline whatever it wants, independent on how it was declared.
¹ except when the deprecation point has passed over the Qt version the
API was inlined (-disable-deprecated-up-to configure switch).
[ChangeLog][QtCore] Restored binary compatibility for static Qt
builds broken by the QT_INLINE_SINCE mechanism. Qt still does not
guarantee BC for static build configurations otherwise.
Fixes: QTBUG-109449
Pick-to: 6.5 6.4
Change-Id: Ie3fa62621b74dc5e9dac301b9882c0e3c3999eaf
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
We've ported all qExchange() to std::exchange by now, across all
modules, but the one in QScopedValueRollback was left behind, because
it requires C++20's version of std::exchange (constexpr).
Since q20::exchange was not approved, replace the qExchange() here
with two moves and add a comment to port to std::exchange() once we
can depend on C++20.
Then add QT_NO_QEXCHANGE to avoid new uses from creeping in.
Change-Id: I488e252433e78fb2766639dbe77a22a55196cfd1
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
The .bat extension was already handled for, __qt_cmake_private_path,
and adding the extra one was causing an issue where
qt-cmake-standalone-test was calling qt-cmake-private.bat.bat!
Amends 8aae821b5a
Pick-to: 6.5
Change-Id: I9c374440c89c617e31f369fde8f041e5c1d17a03
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This simplifies deployment and eliminates the possibility
for duplicate downloads due to the browser/server not
understanding symlinks.
Change-Id: Ife22c052c424f309d76ff0f9118c01e98426da95
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
We agreed that qt-configure-module needs to come back to bin/ as it's
user-facing.
Amends d77ce33082
[ChangeLog][CMake] Upon further consideration, qt-configure-module
was deemed user-facing, and was thus moved back to ./bin on
all platforms.
Task-number: QTBUG-107621
Change-Id: I1f7874436e5b3988242091fc0303ea828f29d5c6
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
When collecting the dependencies of a target, it can happen that we
encounter a target that is not visible in the current directory scope.
This can usually be fixed by moving the corresponding find_package call
to a higher directory.
Detect this situation and print a warning with instruction how to
silence this warning: either by fixing the situation or by setting
QT_SILENCE_MISSING_DEPENDENCY_TARGET_WARNING.
Fixes: QTBUG-108286
Change-Id: I9033fedbd81ef0710b7cc11fab0e94e67c74ff86
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This mimics CMake's policy support. The policy state is stored in an
internal __QT_INTERNAL_POLICY_<policy> variable; by using normal
variables, we gain support for stacking for free.
Policies can be explicitly en- or disable via qt6_policy; that command
also has a GET mode to retrieve them again.
Furthermore, one can now pass min and max version to
qt6_standard_project_setup, to opt in to a certain set of defaults
introduced in a given Qt version.
We add support for policies in QtModuleHelpers, so that we can check for
known policies while building Qt itself.
No actual policies exist yet; but a follow up commit will introduce one
for qt_add_qml_module.
Change-Id: I57a0404c9193926dd499f94cc5f73e359355c0b3
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Qt Creator maintains a mapping from Qt version to Android NDK version
and other build information. It's simpler to let the Qt build write the
Android build information into modules/Core.json and have Qt Creator use
this information.
This adds the following properties to the module JSON files:
- built_with.android.api_version
- built_with.android.ndk.version
Task-number: QTBUG-108292
Change-Id: I0febda5192289c5afb1a098880b31bef6317db35
Reviewed-by: Marcus Tillmanns <marcus.tillmanns@qt.io>
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
The module description JSON files contain architecture-specific
information. Therefore they should reside below INSTALL_ARCHDATADIR
instead of INSTALL_DATADIR.
Moving these files should be unproblematic as there are no known users
of these files.
Change-Id: Ibff1f7b6ce2d1633ebce33861358ad5d1cae2beb
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
At the moment when doing a non-prefix build and changing some of those
files, CMake will not update the changes to the build folder unless
done manually or a re-configure is done manually.
qt_copy_or_install() only does copy those files at configure time once,
and using CMAKE_CONFIGURE_DEPENDS would be an overkill here and even
a bit of an extra annoyance, so in this case having a custom command
seem to be suitable.
Done-with: Alexey Edelev <alexey.edelev@qt.io>
Change-Id: I55aa9e9d3eea32a4bb54c64abd4cbdcb891c44b6
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
It looks like adding dependencies to interface libraries is either not
fixed or broken in CMake versions newer than 3.20. Remove the CMake
version check to ensure that 'lib_pri' targets are executed. This will
restore the initial behavior.
Amends cfcc4ef8ed
Pick-to: 6.2 6.4
Fixes: QTBUG-109240
Fixes: QTBUG-109239
Change-Id: I8c5b317fcdd0a715a1a668b4e955df1acfe4be8b
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Upstream commits:
db46fc981fd8c1a46d923aeaf2187dfcc8b50099
1e9e1c508e177b6466282dfad273cf6cfcdf5c76
One useful change is removing the "XINPUT from XCB is experimental"
warning, it's been around and the default for ages.
Task-number: QTBUG-109183
Change-Id: Ie66aa76c5e3ce83d5d654cfa8279a946c7486602
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
By adding a CMake option() that is OFF by default.
Change-Id: Ic66cae5bb9739ae1db3e534f671cc1e9e4b09647
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
The argument allows to ignore the condition for source files if they
are used in the Qt code without corresponding guards. The header files
of this kind usually have internal guards, that suppress the error
at the location where they are used, so AUTOGEN is skipped for these
header files to suppress the warnings from CMake. If file belongs to
a module, it will display AUTHOR_WARNING which should urge Qt
maintainers to guard the use of the source file properly.
Task-number: QTBUG-103196
Change-Id: I7b4c12031a5d19ff15868d4782c0d396ef7aed8c
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
This will enable all qt internal tools to be able to access files
on paths longer than 255 characters.
Two examples that were not working before: moc and windeployqt.
Fixes: QTBUG-109207
Change-Id: I93f9770f1d3c4f3f2cca4655e4bed89c95b9786b
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
In CMake versions older than 3.20 add_dependencies have no effect
when adding interface libraries. So need to add the '_lib_pri'
targets to ALL to make sure that the related rules executed.
Amends 190e58e1f4
Pick-to: 6.2 6.4
Fixes: QTBUG-109240
Fixes: QTBUG-109239
Change-Id: I7c565ce3bc15e549569317454c2f7caac823cf66
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
In cross builds, we are not creating versioned links for qt tools. This
patch addresses that. I've changed the signature of the
`qt_internal_install_versioned_link` such that it can be used for
non-target as well, so in cross build the qmake or qtmake.bat can be
processed with the same function.
Fixes: QTBUG-109024
Change-Id: I246621c18325d084622ca92b422e815ed06f1381
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
As far as I can tell nothing uses TYPE anymore.
[ChangeLog][QtCore][CMake] The deprecated TYPE option of the
qt_add_plugin() has been removed. You can specify the plugin
type using the PLUGIN_TYPE option instead.
Change-Id: I786fbc772a23ae0037d9a4cf68018e3af5cb061d
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This adds a new platform named wasm-emscripten-64
which sets the build and link argument -MEMORY64
You may see this warning, please ignore at your own discretion:
em++: warning: -sMEMORY64 is still experimental. Many features may not work.
[-Wexperimental]
Fixes: QTBUG-104891
Change-Id: I8d3150d239ba72dbef5c2352e0171d6cfbe51b59
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
PPS_LIBRARY and PPS_INCLUDE_DIR cannot be empty at this point (otherwise
PPS_FOUND would be FALSE). But it's arguably good practice to puth paths
in quotes.
Task-number: QTBUG-108930
Pick-to: 6.4
Change-Id: I87128da50f37cd6aa1a66811261a05ceb8c3e790
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
After this change, private CMake scripts are mostly live in
`libexec/`, except the `qt-cmake` which will stay in `bin/`.
This doesn't affect the Windows configuration.
- `qt-cmake` stays in `bin/`
- `qt-configure-module` moves into `libexec/`
- `qt-cmake-private` moves into `libexec/`
- `qt-cmake-private-install.cmake` moves into `libexec/`
- `qt-cmake-standalone-test` moves into `libexec/`
- `qt-internal-configure-test` moves into `libexec/`
In cases where `QT_GENERATE_WRAPPER_SCRIPTS_FOR_ALL_HOSTS` is set to
ON, e.g., ANDROID, WASM, both Batch and Bash files will be generated
and placed in `bin/` and `libexec/` accordingly; in both cases,
qt-cmake and qt-cmake.bat will be in `bin/` anyway.
[ChangeLog][CMake] The private Qt CMake scripts, i.e.,
qt-configure-module, qt-cmake-private, qt-cmake-private-install.cmake,
qt-cmake-standalone-test and qt-internal-configure-test were moved
into $prefix/libexec on Unix platforms.
Fixes: QTBUG-107621
Change-Id: Ic4f4ec85f64d2ede0e208bca928959e30be906a6
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
pcre2-16 is not the target name provided by the upstream Config file. It is PCRE2::16BIT.
2410fbe386/cmake/pcre2-config.cmake.in (L122)
Pick-to: 6.2 6.4
Change-Id: I89f167e11bf1c72c9fae474ddd12380636ac5df8
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
When we use MSVC to build static libraries, enabling LTCG will
generate very large output, for example, Qt's bundled 3rd party
libraries can be greater than 100MB per file (some of them even >200MB!).
This is not good if we are building a shared version of Qt and
enabling LTCG at the same time. On Windows Qt's bundled 3rd party
dependencies will be built as static libraries and they will make
the final Qt package way too large. From my side, if I only build
a release version, the package size is usually around 500MB but
when LTCG is enabled, it become over 2GB. The exe and dlls' size
don't vary much, but there are many large static libraries.
Fixes: QTBUG-108719
Change-Id: Ic521f500b9c24389524e96a8cdc2e7b3427b51a9
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Amir Masoud Abdol <amir.abdol@qt.io>
Introduce the variable QT_SKIP_SETUP_DEPLOYMENT to turn off the
generation of deployment support files. Set this variable when building
Qt - but only if we're not building examples.
This avoids a warning about missing patchelf when building Qt with CMake
< 3.21.
Change-Id: I8ff5491eb314ff870c210884fbf90dd4c9ad0219
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
An MSVC debug-and-release build of Qt with the MySQL plugin requires
separate builds of the MySQL client library: a debug and a release
build. There was no way to specify the debug version of the library.
Now, it's possible to configure Qt like this:
cmake ... \
-DMySQL_ROOT=D:\mysql-connector-c-6.1.11-winx64 \
-DMySQL_LIBRARY_DIR=D:\mysql-connector-c-6.1.11-winx64\lib\vs14
This will automatically detect the include dir and the debug and release
library files. We expect that the debug build of the MySQL client
library resides in a "debug" subdirectory below MySQL_LIBRARY_DIR.
If the automatic detection doesn't work to due a different layout on the
build machine, one can set the variable MySQL_LIBRARY_DEBUG to specify
the debug variant of the MySQL client library.
[ChangeLog][CMake] If pkg-config is not used, a debug build of the MySQL
client library can be specified with
-DMySQL_LIBRARY_DEBUG=<path-to-library>. The debug and release variants
of the library are automatically detected. Setting MySQL_ROOT and
MySQL_LIBRARY_DIR is sufficient in most cases.
Pick-to: 6.2 6.4
Task-number: QTQAINFRA-4999
Change-Id: I663fb8ac1dbd07bc73484791be9cc21bff2f4a9b
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Amir Masoud Abdol <amir.abdol@qt.io>
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
This is done to avoid cmake syntax errors when adding new tests.
Change-Id: I8106b13a865b990c52e09573488881bd18e64c7f
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
It looks like these targets used to manage some custom commands that
belong to HEADER_MODULES. We don't currently have a need to use them,
so we clean up the code.
Change-Id: I8095f4de2c91a6c310cccb9b89514c2ce77e32f0
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
There is no reason for adding dependency to the custom
'_pri_dep_timestamp' target instead of the INTERFACE_LIBRARY target
itself. This will close the chains of dependency between repo targets
and the HEADER_MODULE dependencies.
Pick-to: 6.4 6.2
Fixes: QTBUG-108815
Change-Id: I0e170d3e0e42d342881beb8aca1cc5a764425826
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Building repo targets may be incomplete as we skip adding
INTERFACE_LIBRARIES as dependencies. This leads to the missing
artifacts belonging to HEADER_MODULES. It seems reasonable and safe to
include INTERFACE_LIBRARIES in the list of dependencies of the repo targets.
Pick-to: 6.4 6.2
Task-number: QTBUG-108815
Change-Id: I83f44018f42dcf2fb1e3299461e17ef53e79c2e5
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
Add the '-mimetype-database-compression' command line argument that
allows to select the preferred compression type for the mime type
database, including 'none' compression type, which avoids mime type
database compression even if respective compression APIs are present
in the system. The argument has the CMake alias called
'INPUT_mimetype_database_compression'.
Change-Id: I66daddae7014d109fa175a5f397e984928f4ee47
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
In the case of re-doing, `configure` and `configure.bat` pass an extra
parameter to the `QtProcessConfigureArgs.cmake`. As a result, CMake
removes CMakeCache.txt and CMakeFiles/ before the reconfiguration. If
the user is using CMake 3.24 or newer, this is achieved by passing
the `--fresh` option to CMake call. In older CMake(s), CMakeCache.txt
and CMakeFiles/ found in CMAKE_BINARY_DIR will be removed using a
file(REMOVE_RECURSIVE call.
[ChangeLog] The -redo option now additionally removes existing
CMakeCache.txt file, and CMakeFiles/ directory, and recreates them from
scratch.
Task-number: QTBUG-108287
Change-Id: I11a5c8f9df1247d11eb7097552e6764463583346
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
macOS Catalina (10.15) has reached its end-of-life, and is no longer
supported with bug fixes or security updates by Apple.
Change-Id: I65d0f572785bc77a563be925cf64823c20b9e015
Reviewed-by: Liang Qi <liang.qi@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
