They are needed for older compilers that doesn't support
the __fp16 extension. Reverts under the assumptions other
compilers will optimize it away.
This reverts commit 6dc7e468df.
Task-number: QTBUG-63693
Change-Id: If780de001d8c12df0db12caaf62505f16e01b663
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
On high DPI (e.g Apple Retina) user resizes of
QDockWidgets (with custom titlebars) could fail.
There was a cursor position check in mouse
move event bailing out if the cursor pos was not within
the widget.
The problem was that we could be on the edge
(or maybe even cross it?). Furthermore there is (/was)
no similar check when setting the cursor
to be a resize cursor, so users will obviously expect
the resize to occur.
This solves a part of QTBUG-63526
[ChangeLog][QtWidgets][QDockWidget] Fixed an issue
in QDockWidgets where the widget would not resize
despite showing a resize cursor.
Task-number: QTBUG-63526
Change-Id: Ifa842a109071552506da3a82822d903dc252c8cd
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
Commit ba1b73175b tried
blacklisting this autotest in Windows 7 only. This however
does not work. We can't pin point blacklisting to a specific
Windows version.
Task-number: QTBUG-63122
Change-Id: I5edb5b56fd86ad194214818a838db9cfd6be2ad1
Reviewed-by: Simo Fält <simo.falt@qt.io>
This autotest has been blacklisted already in RHEL 7.1
and RHEL 7.2. This one extends it to 7.3 and 7.4.
Task-number: QTBUG-52523
Change-Id: I3e2d8cd882d9f7dc58a65bde88e3aa16438b13c3
Reviewed-by: Simo Fält <simo.falt@qt.io>
308 Permanent Redirect was introduced after redirection support was
initially added to Qt.
[ChangeLog][QtNetwork][QNetworkAccessManager] Added support for HTTP status 308.
Task-number: QTBUG-63075
Change-Id: I1c6cda331d776237113ef8854de9abfe7e41ed3e
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Partially revert a72513cab7.
The value is too small for Chinese fonts.
Task-number: QTBUG-63654
Change-Id: If020bfc3044258b7abfd9d463bc9b292a9cc0839
Reviewed-by: Alessandro Portale <alessandro.portale@qt.io>
We're not going to crash to avoid core dumps getting recorded by
systemd, filling up filesystems or showing dialog boxes. We just need to
exit without running destructors. Now, exit() isn't supposed to run
function-scope destructors, so just in case we use _exit().
Change-Id: I0b48fc8e90304e0dacc3fffd14e909ff248ce1a1
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Documentation is missing the specialized event type names in the
non-client mouse event enum description.
Task-number: QTBUG-55018
Change-Id: Ica35994e13fc9a637a52eeca361898f8669fdbd1
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Leena Miettinen <riitta-leena.miettinen@qt.io>
If the datagram reception failed, we forgot to set the buffer back to
empty. The returned QNetworkDatagram did report isValid() == false, but
it was possible to get the .data() and check its size, getting nonsense.
Tests in the next commit.
Change-Id: I638cf58bfa7b4e5fb386fffd14ea91adf2133d47
Reviewed-by: Jesus Fernandez <Jesus.Fernandez@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Amends c1cece8e54
For some reason, this was missed in the original change. This is now
outright prohibited in the watchOS 4 SDK and will cause a compilation
error on that platform.
Change-Id: Iaa2edf6256a54ca11dec9f1efd8a4d18ba7dc046
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Use the FreeType LCD rendering path with 2.8.1 even when it has lcd-
filtering disabled. This gives us proper subpixel rendering even with
a freetype build with the patented lcd-filtering code disabled.
The code is also simplified by removing the long pointless
ifdefs for 10+ year old versions of freetype.
Change-Id: I487e465317cb984b6e33c7bcc497f27cf29f9bcd
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
We should calculate the pen width based on the scaling similar to how
it is done for normal lines, otherwise we get the scaling applied
twice.
Task-number: QTBUG-61777
Change-Id: Iba71d55971a1d29537d2c9ff33749223a06160de
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
For gridlayout items the x position is rounded, but the QRectF changes
the width to keep the right edge. The width is yet calculated exactly
for the text so we need to preserve it.
Task-number: QTBUG-61244
Change-Id: I823ba742c9ab299740232b5d9b4ad5713e1782c4
Reviewed-by: Jan Arve Sæther <jan-arve.saether@qt.io>
This fixes a regression introduced in 8e70241dcc.
Task-number: QTBUG-63631
Change-Id: I5a2c23e06b790a482e1542ac2db3dcf25927caf2
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
If the native visual was BGR888, the XCB plugin would assert as soon as
it needed to find the corresponding QImage format. Fix by adding the
required mapping in qt_xcb_imageFormatForVisual().
Task-number: QTBUG-62840
Change-Id: Idd9eb01a60f605ad004d5b0c3025ded63ed64271
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
329a029c36 made ::raise and ::lower do nothing
for topmost and bottommost windows. This made it impossible to
e.g. raise one topmost window above another topmost window using
QWindow::raise.
Task-number: QTBUG-62021
Change-Id: I5f60816cbc48d69c0411e3bd68852d8bd8e300bb
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
<future> is needed by QThread::create. Instead of a fragile series
of preprocessor tests, move its detection to a configure test.
This dramatically simplifies the code, but on the other hand ties
the availability of QThread::create() to the system used to compile
Qt (rather the one used to compile an application).
Change-Id: If1b06363379bf29126cfa68f2a0651cbb78a67f7
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Commits aba336c2b4 (in Qt 5.2) and
aba336c2b4 (in 5.6) both tried to deal
with this problem, with different levels of success. This is the third
attempt (and hopefully the charm).
Instead of modifying the path that the user provides, go straight ahead
and declare it invalid. This is supported by RFC 3986, which declares
this expansion impossible:
relative-part = "//" authority path-abempty
/ path-absolute
/ path-noscheme
/ path-empty
path-abempty = *( "/" segment )
path-absolute = "/" [ segment-nz *( "/" segment ) ]
path-noscheme = segment-nz-nc *( "/" segment )
The "path-abempty" and "path-noscheme" cases are the two issues we
already handle. This commit adds the third one: path-absolute, which
requires that the first segment of the path be of non-zero length.
That is, it is now possible again to have http://example.com//path
constructed piece-wise, without it producing http://example.com/path.
Additionally, it catches the case of http://example.com//path parsed
from full URL then followed by setAuthority("").
Change-Id: I69f37f9304f24709a823fffd14e67a5e7212ddcd
Reviewed-by: David Faure <david.faure@kdab.com>
We don't support Windows versions prior to 7 nor Windows CE anymore.
Change-Id: I638cf58bfa7b4e5fb386fffd14ea930155d67689
Reviewed-by: Jesus Fernandez <Jesus.Fernandez@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
That was stupid for two reasons. First, applicationName() can be changed
by the user by calling QCoreApplication::setApplicationName(), so if
that happens, we won't be able to properly identify a lock belonging to a
given application because the name changed.
Second, because applicationName() is not what we compare to. Instead,
let's use processNameByPid() on both content creation and verification.
[ChangeLog][QtCore][QLockFile] Fixed a bug that would cause QLockFile
mis-identify valid lock files as stale if the application name was set
with QCoreApplication::setApplicationName().
Change-Id: I0b48fc8e90304e0dacc3fffd14e912a5c98c87e7
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
We duplicated both the creation of the contents and the check if the
file was stale. Centralize everything in qlockfile.cpp.
Change-Id: I0b48fc8e90304e0dacc3fffd14e91174af79841f
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
F_SETLK is bad. Explanation in the comment. And flock(2) does work with
NFS on Linux, so let's just stick to that, which is simpler.
We only use the file locks when we attempt to delete an apparently stale
lock: that is, for a lock file that is at least staleLockTime old.
Change-Id: I0b48fc8e90304e0dacc3fffd14e908c8c4c9d59b
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: David Faure <david.faure@kdab.com>
It's confusing to keep it along with an unrelated class. Let's keep it
in its own file like for most other platform plugins.
Change-Id: I449ee061ff9fd5dc7ef06cadd633414d6b16358f
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@qt.io>
It's been for years that QMenu's rounded corners in qmacstyle_mac were
done via QWidget::setMask(QRegion). Unfortunately, QRegion mask does not
work well with retina displays and also does not support translucency.
That's why in this change we explicitly make QMenu's background
transparent and then draw a rectangle with rounded corners in
QMacStyle::drawPrimitive(PE_PanelMenu). This not only gives much better
result than the mask-based approach, but also de-HIThemes QMenu.
As a consequence, QComboBoxPrivateContainer doesn't get any mask from
QMacStyle anymore. Therefore, when the mask is empty, we need to paint
PE_PanelMenu before invoking QFrame's paint event handler.
Made-with: Gabriel de Dietrich <gabriel.dedietrich@qt.io>
Change-Id: Ia9236176113f23b86e45507fa6ddf77236084ce3
Reviewed-by: Oleg Yadrov <oleg.yadrov@qt.io>
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@qt.io>
The qWaitFor functions themselves can not trigger a test failure, as that
will not result in the test function exiting early, so every single call
to qWaitFor needs to be wrapped in a QVERIFY.
Change-Id: Id15a1549f31d06cdbf788e1d84ea431c28636ec8
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The resources allocated by QPlatformBackingStore are owned by the class,
and should be allocated in a context the class also owns. This removes
the asymmetry of having to pass in a context to composeAndFlush, while
having to make the same context current before destroying the platform
backingstore.
The context owned by QPlatformBackingStore is shared with the associated
window though a new QWindowPrivate::shareContext() API.
The result is that on e.g. iOS, the backingstore does not need to tie
the resource allocation of QPlatformBackingStore to the global share
context, but can instead tie them to the per-window context, and hence
clean them up after each window is closed.
Task-number: QTBUG-56653
Change-Id: Ic1bcae50dafeeafaa8d16a7febd83b840ec6367a
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
The test tst_QXmlSimpleReader::inputFromSocket() is failing with
"QTestLib: This test case check ("(((server->listening)))") failed
because the requested timeout (5000 ms) was too short, 11700 ms would
have been sufficient this time".
Increased the timeout, since it's better to wait than to fail.
Task-number: QTBUG-63539
Change-Id: I804549648ea834e41d3c87871f5bab90f209385c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The call to CGImageCreateCopyWithColorSpace took a naked toCGImage(),
which left the resulting CGImageRef without a release, causing the
extra ref by toCGImage() to never be derefed, and a subsequent detach
of the image data on the next paint event.
Wrapping the call in a QCFType<CGImageRef> solves the problem. The code
has also been moved directly into QCocoaBackingStore::flush(), as there
is no need to keep the CGImageRef a member.
A local autorelease pool has been added to QCocoaBackingStore::flush(),
so that the NSImage used for blitting the backingstore is released upon
exit of the function, thereby releasing the corresponding CGImageRef.
Note that for layered mode, the QImage will still detach, as the view's
layer.contents property keeps a reference to the image data until being
replaced in a subsequent flush.
Task-number: QTBUG-63559
Change-Id: I06b9298f65a84deae7cc2eff617ba75c92ec3b87
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
[ChangeLog][iOS] The minimum deployment target for applications is now
iOS 10.0.
Change-Id: Icb37e4eaecbf6f62fd3c9293b2abf19a0954a02d
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
When many runnables are executed, this improves the
performance by not resizing the queue for each runnable,
which was the case in the previous version, because of
many calls to QVector::takeFirst().
Also add a test that makes sure tryTake() is safe to
call and does not leave the queue in a bad state that
tries to use nullptr entries.
Change-Id: I608134ecfa9cfc03db4878dcbd6f9c1107e13e90
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
We can't qWaitForWindowExposed on native menu bars. Other test
functions in this file are already disabling the native manu bar.
Task-number: QTBUG-24326
Change-Id: Iecf907ca84589159417d0d942c911485a41af164
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
A "compound widget" is a widget that has a focus proxy set to an inner
child. This is normal for complex black-box components where focus handling
is delegated to the children. Since the compound can have several
children, a local tab order might exist between them.
The current implementation of setTabOrder had no idea about
compound widgets. As such, when connecting two compounds in the
tab chain, it would just break up their inner tab order and
cause tabbing to ignore children other than the proxy.
The new implementation recognizes compound widgets, and add some
extra code to figure out the correct tab targets. This way, the
local tab order between the children will be preserved.
This implementation was inspired by the patches of Marek Wieckowski posted
in the linked bug report, and later modified by Nikita Krupenko.
[ChangeLog][Widgets] QWidget::setTabOrder() will now preserve the local
tab order inside a widget if it has a focus proxy set to an inner child.
Task-number: QTBUG-10907
Change-Id: I0673d39d70ec8c6bf64af30bf978d67c651b2f3c
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
That's no longer a thing on macOS. We still keep it around for
QMdiSubWindow, but we should support 4-edge resizing there as
do native windows.
In practice, because of WA_MacOpaqueSizeGrip, we were already
rendering the size grip manually instead of relying on HITheme.
Change-Id: If613a14f03dc650b457688f3f2f57631b5fb30a3
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
NSBox is good enough for this and pixel equivalent with
the previous HITheme calls.
Change-Id: I32b2a1cc8a9cd2a6ef17d1e01032540344808ebc
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
That switch following the if looked a bit corny.
Also made cocoaCells hash mutable to get rid of the
const_cast(this) in QMSP::cocoaCell().
Change-Id: I4facec827409314cf1214152c19efb9688715eb2
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
The original test was using QSslSocket::waitForEncrypted function, which
is apparently a bad idea on Windows: connecting to 'www.qt.io' we have
to verify certs and there is no guarantee a given Windows VM has the required
CA certificate ready in its cert store. In such cases we start a background
thread (aka CA fetcher's thread) and it calls a (potentially blocking for
a significant amount of time) function (CryptoAPI). When finished, this
thread reports the results via queued connection, which does not work
if we are sitting in a tiny-loop inside waitForEncrypted. Re-factor
the test to use signals/slots and a normally running event loop.
Also, the last test makes a wrong assumption about Windows - fixed.
Task-number: QTBUG-63481
Change-Id: I4abe9cda2a6c52d841ac858cccb6bf068e550cb8
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
When the query is forward-only then nextIndex() is always 0, therefore
the cache values need to be cleared beforehand so that they are not
reused when the next row is retrieved.
Task-number: QTBUG-57765
Change-Id: I49e8427b24ec2d932e5b387699ac7f3496e9a48c
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Window icons on macOS are tied to document windows, and should not show
up unless a represented filename has also been set according to the HIG.
We follow this, and no longer create a document button based on the window
title if one did no exists. We also fall back to using the filename of
the file if a title has not been set, including being able to restore
this default title after setting a custom title.
The icon is no longer reset to nil after setting a QIcon(), which would
remove the icon completely, but instead we restore the default behavior
of showing the default filetype icon of the file.
Finally, the two callbacks in QNSWindowDelegate dealing with the document
icon/title popups and drags have been taught to look for spaces in the
represented filename. This allows clients who really want the old
behavior of setting an icon without caring about the filename to set
the filename to a single space character, which will prevent the
dropdowna and drag from occurring.
The reason for not tying this behavior to the existence of the file in
the filesystem is that being able to represent a file that is yet to
be saved is a valid usecase.
Task-number: QTBUG-63338
Change-Id: I7d4377c6358226fb6058f8c2b3c28588eec77ce5
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
