otherwise test de-duplication between modules doesn't work.
Change-Id: I2c6222d853108df223758aa8907dc8d004efd87f
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
especially during debugging, it is often necessary to re-run only one
(or a few) tests, where -recheck-all would be wasteful.
Task-number: QTBUG-64059
Change-Id: I9410894dec4289ff832d7f75e04f9b60fe76c57c
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Enable xcb QPA plugin when XQuartz is available. This is done
in a single build, alongside the Cocoa version.
We delegate part of the configuration stage to pkg-config, so
this becomes a requirement. Ensure that
PKG_CONFIG_PATH=/opt/X11/lib/pkgconfig:/opt/X11/share/pkgconfig
is in your environment, or pkg-config is properly set up.
Tested with the following configure options:
configure \
-pkg-config \
-fontconfig -system-freetype \
-system-xcb -xkb -no-opengl \
-qt-xkbcommon -qt-xkbcommon-x11
Change-Id: I2eb5a0491172368afc4c629c540cbef08580348d
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
it could be somewhat surprising that specifying variant-specific libs
would not clear the common libs, so do that. of course, the default
for the common libs could theoretically contain common deps of the
variant-specific libs, in which case clearing them would be surprising
in turn - luckily, we have no such case.
Change-Id: Ifca08b9e1949c6a0cefed6931ade4021927d7c90
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
... and not only when the source explicitly specifies build variants.
Change-Id: Iac6c8fda8f431d5fb50fada8338d1b660ab040d7
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
unlike for the other fields, we forgot to eval() the values of the
build-specific library values, leading to over-quoting of values which
require any quoting at all.
amends c0cc50520.
Task-number: QTBUG-62521
Change-Id: I4dfce31040dd09248d3f9dd4294f7fb147c13bdd
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
qtConfLibrary_inline() used to set $${1}.builds.$${b}.libs, while
everything else assumed no such .libs suffix. fix the former.
amends 9172143f52.
Task-number: QTBUG-61431
Started-by: Konstantin Ritt <ritt.ks@gmail.com>
Change-Id: I0bd81591c46266d81baa9c12315411183bbc7a63
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
It seems the compiler supports /arch:AVX512 and /arch:AVX512F but none
of the other switches (and neither are documented). And when you pass
those, you also get Conflict Detection (CD), Double & Quad (DQ), Byte &
Word (BW) and Vector Length (VL), which matches the ICC switch
"-xCORE-AVX512". Unlike ICC, there doesn't seem to be an option to
enable only the common part of AVX-512.
Support for Intel Xeon Phi's current features (Exponential &
Reciprocation and Prefetch) and future ones (IFMA, VBMI, 4FMAPS, 4VNNI
and VPOPCNTDQ) seems to be missing altogether.
See https://blogs.msdn.microsoft.com/vcblog/2017/07/11/microsoft-visual-studio-2017-supports-intel-avx-512/
Change-Id: I98105cd9616b8097957db680d73eb1f86e487e6d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Common changes to mingw-w64, ICC on Windows and MSVC toolchains:
- update toolchains description similar to 'gcc-base.conf'.
Change-Id: Ie456c6cec86c0d1c0107ca84a0fa7855666df91e
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
For source packages that don't have a .git subdirectory, syncqt is
executed before configure, with outdir set to srcdir, and this
caused path misalignments for injected headers in qt_module.prf
when generating makefile rules.
The fix is to change syncqt to always output injected header
paths relative to the source dir.
Task-number: QTBUG-64539
Change-Id: Ia2296e44494093dbf124729062f430ad6fca7262
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
This fixes an issue where a build error may be introduced by a simulator
being selected whose OS version is lower than the application's
minimum deployment target.
Task-number: QTBUG-64456
Change-Id: Ic7c834a1473c183ebb910bc01a416fe1e23a5a14
Reviewed-by: Eike Ziller <eike.ziller@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
We want to know when a plugin uses deprecated Qt APIs, especially
deprecations in the QPA APIs, which today is not the case, so
platform plugins have no idea that they should transition.
Change-Id: If9d3d95dc6f1f4178b103f177c9eb8326767ffab
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
Xcode 9 introduced the main thread checker, which detects invalid
use of AppKit, UIKit, and other APIs from background threads.
https://developer.apple.com/documentation/code_diagnostics/main_thread_checker
In our case these are accesses to e.g. [UIView layer] and
[UIScreen scaleFactor] from the render thread of QtQuick,
things we should look at, but that might not be easily solvable.
In any case, these are not warnings the user can do anything about,
so in lack of a per-library disable of the checker, we have to
globally disable it for the whole Xcode project.
Task-number: QTBUG-63822
Change-Id: Ibfcdf23891cf6bfbbc9b9b3349e4c256c273c7de
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
Bundle data source files which don't exist at qmake time need to be
handled specially. This also required splitting the generated list of
public headers, as was already done for private ones.
Task-number: QTBUG-60413
Change-Id: I97acfa88622da6b73839b8f976f73ace3cb10223
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
This warning used to be part of -Wconversion, but that generates too
more noise than we're willing to fix now (like conversion from qint64 to
int). The float conversion does trigger for conversion from double to
float, as shown in all the QVectorND uses of float, but more
importantly, it triggers on passing floats to ints.
Change-Id: I69f37f9304f24709a823fffd14e69cfd33f75988
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
SYSTEM is used for system() calls, while SHELL is used in the target
Makefiles.
Task-number: QTBUG-62985
Change-Id: Ia75d3939c59c98699359421166433e8b4a6ee35e
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
I need to include linxx/if.h from elsewhere and these two files conflict
by defining the same types (struct ifreq, struct ifmap, struct ifconf,
etc.)
Change-Id: I0a103569c81b4711a649fffd14eb2f6dbbef83b6
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
[ChangeLog][iOS] The minimum deployment target for applications is now
iOS 10.0.
Change-Id: Icb37e4eaecbf6f62fd3c9293b2abf19a0954a02d
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
This guarantees that we have proper version checks in place for APIs on
Apple platforms that are not necessarily available on the deployment
target.
Change-Id: I10060f8b910f2bb790aa4a9c6f8c5cdc14d7cf06
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This definition causes a build error if concrt.h is included.
According to Microsoft [1], this macro is unsupported. It was added in
f5908363 to silence compiler warnings that are generated when exceptions
are turned off and certain STL headers are included.
We specifically disable the warnings in question now.
[1] https://blogs.msdn.microsoft.com/vcblog/2015/07/14/stl-fixes-in-vs-2015-part-2/
Task-number: QTBUG-63409
Change-Id: I567d5d46292fbd7898394e217bb0987fbcdca9de
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
We obviously should check the variable we're about to get the data from.
Amends 1216f596bd.
Change-Id: Ibe87138b9c9aa99837b4fbf3769cd26ca1aaacb9
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
If MOC_INCLUDEPATH exceeds a certain limit, its content is written into
a file named mocinclude.opt, which is then passed to moc as a response
file. That moc parameter was not properly quoted, and the moc call
failed for paths containing spaces.
Task-number: QTBUG-63197
Change-Id: Ib0542d80ce1bab239e0e6b6e24fadd11007b1846
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Amends cab060631
Task-number: QTBUG-62995
Change-Id: I374153ec34abad0585d2bcab0f699b42600be6ef
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@qt.io>
This removes the pre-dexed JAR files activated by the absence of the
bundled_jar_file CONFIG option, as versions of Android >= 5 no longer
support this deployment mechanism.
Now, the "bundled" JARs simply become normal JARs containing class
files, and are neither activated by a bundled_jar_file CONFIG entry nor
do they have a -bundled suffix in the file's base name.
Task-number: QTBUG-62995
Change-Id: I3fa6819259be365b7a697f7db1d1d01a94032395
Reviewed-by: BogDan Vatra <bogdan@kdab.com>
Enabled via configure --ccache, or CONFIG += ccache in 3rd party
projects.
Ensures that we use the right sloppiness and other ccache options
during compilation.
Task-number: QTBUG-31034
Change-Id: I696b3d3f0398873a29b93d1bc2b4d4e06ef23dc9
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Conflicts:
examples/examples.pro
qmake/library/qmakebuiltins.cpp
src/corelib/global/qglobal.cpp
Re-apply b525ec2 to qrandom.cpp(code movement in 030782e)
src/corelib/global/qnamespace.qdoc
src/corelib/global/qrandom.cpp
src/gui/kernel/qwindow.cpp
Re-apply a3d59c7 to QWindowPrivate::setVisible() (code movement in d7a9e08)
src/network/ssl/qsslkey_openssl.cpp
src/plugins/platforms/android/androidjniinput.cpp
src/plugins/platforms/xcb/qxcbconnection.cpp
src/plugins/platforms/xcb/qxcbconnection_xi2.cpp
src/widgets/widgets/qmenu.cpp
tests/auto/widgets/kernel/qwidget_window/tst_qwidget_window.cpp
Change-Id: If7ab427804408877a93cbe02079fca58e568bfd3
Define the lib dependencies for corelib in corelib.pro, where they
belong.
Change-Id: I973d3b0c571782d869b27dea243e899db4dddc43
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
When a ObjC++ QObject subclass is listed in the regular HEADERS, qmake
creates a .cpp file. The moc file will then fail to compile, as it
requries ObjC++ headers. Using Q_FORWARD_DECLARE_OBJC_CLASS() can be
used to let the class be parsed by The compiler, but link will still
fail, as the generated methods (e.g. signals) must be built with ObjC++
compiler, in case they have ObjC parameters:
Q_FORWARD_DECLARE_OBJC_CLASS(NSString);
class MyClass: public QObject {
Q_OBJECT
signals:
void objcSignal(NSString * myObj);
};
The canonical workaround for that is including the .cpp file into the
corresponding .mm file. This also offers a compilation speed advantage,
but is somewhat counter-intuitive.
Therefore, we introduce a separate variable which instructs moc to create
.mm files directly.
Task-number: QTBUG-1581
Change-Id: Ia98af58006efd168ea37f3a63c396979e7e81baa
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
clang+libc++ is the only supported way by Google nowadays.
libstdc++ is too old and already fails to build some C++11 apps
e.g. missing std::to_string().
android-g++ mkspec still uses libstdc++ and g++.
Use -isystem to include system headers instead of QMAKE_INCDIR_POST (-I).
Task-number: QTBUG-60455
Change-Id: Iba8b04594c2e5e2832e6cf480e4e52ff31ad4106
Reviewed-by: Sérgio Martins <sergio.martins@kdab.com>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
Otherwise 3.8.1 is treated as not recent enough than the required 2.8.3
Change-Id: I198fc7d54e3da935fd163c9b9bb7dc12b986d1c2
Reviewed-by: Konstantin Tokarev <annulen@yandex.ru>
So far this only covered the QT_xxx_LIB define, but not any other defines
a module might export (such as QT_NO_QML_DEBUGGER which hasn't been ported
to the new configure system yet).
Change-Id: I8aae2354fed77a6f0e527ad8d63d25654bb067d0
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
Reviewed-by: Kevin Funk <kevin.funk@kdab.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
QMAKE_LINK_OBJECT_MAX is actually a property of the host, not the
target.
this works around binutil's inability to use thin LTO objects in
conjunction with an MRI script
(https://sourceware.org/bugzilla/show_bug.cgi?id=21702).
Task-number: QTBUG-61335
Change-Id: I90a1334b9c905c433b35546e8f3f3b5089d2c65b
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
doing so is somewhat likely to cause follow-up issues, as it turns the
source tree into a build tree as a side effect.
note that this change does not affect building examples inside an
install tree, even if doing that is still ugly.
Change-Id: I386bf2ab959269f55553c70b7551dd9afec2bcba
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
qt_example_installs.prf is loaded by every sub-project inside the qt
tree, as qt_build_config adds it.
Change-Id: Ice7e81b280b6964ed5cc1b9f1501bf74df737d7e
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
don't complain about library inline sources which have 'builds' but no
'libs'.
Task-number: QTBUG-62150
Change-Id: Ib215d438fc02ebdafde95f31cd48088b1bafc663
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
there doesn't appear to be a reason for the former complexity.
QMAKE_CONFIG_LOG was already assigned the simple way.
Change-Id: I6b7e3b5b97c7647237841fa5e16c4959079edc16
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
it's unclear where to look for the error when the message talks about
'g++' when '${CROSS_COMPILE}g++' would have been expected. help it by
saying whether it was supposed to be the host or target compiler.
this also centralizes the error emissions in a function.
Change-Id: I454c6ff7c0e7dd945dcee0de01e2818caeeb7409
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
Replaced dependency to libdl.a with libshm_client.a. Defined symbols
'shm_area_password' and 'shm_area_name' internally. The build for
INTEGRITY is static only so libdl.a is not needed.
Change-Id: I7e34528835132d79ea582a30cf9ff61cdda198da
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Rolland Dudemaine <rolland@ghs.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This will allow Qt Quick applications to use the integrated GPU on
compatible Apple hardware, which helps preserve battery life.
Change-Id: I9224bd408930e2ed3dd8a022432512e78d69c195
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
This makes editing the templates easier since they can be read
alphabetically.
Change-Id: I6af5e4f13718ba1145c2dec1f8a05bc600ea937a
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
... and use it when building shared libraries and plugins.
It prevents application crashes in cases when libraries and
plugins are unloaded and their strings are still used by
the main application.
Task-number: QTBUG-51602
Change-Id: I4af79183f18c5ed6142d55af02a36fe4334f3fee
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
We're adding a lot of unnecessary files that end up later as cargo-cult,
for at most a handful of lines. So instead move the testcases directly
into the .json file.
The following sources were not inlined, because multiple tests share
them, and the inlining infra does not support that (yet):
- avx512
- openssl
- gnu-libiconv/sun-libiconv (there is also a command line option to
select the exact variant, which makes it hard/impossible to properly
coalesce the library sources)
The following sources were not inlined because of "complications":
- verifyspec contains a lengthy function in the project file
- stl contains lots of code in the source file
- xlocalescanprint includes a private header from the source tree via a
relative path, which we can't do, as the test's physical location is
variable.
- corewlan uses objective c++, which the inline system doesn't support
reduce_relocs and reduce_exports now create libraries with main(), which
is weird enough, but doesn't hurt.
Done-with: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Change-Id: Ic3a088f9f08a4fd7ae91fffd14ce8a262021cca0
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
For clang -Os is very similar to -O2 and doesn't really reduce size much.
-Oz is usually what you want to use with clang for code reduction.
Now clang binaries are only 9% bigger than gcc's, instead of 22%.
Change-Id: Ib0ba560be26db68aeb21c13df4b151b7fbd81431
Reviewed-by: BogDan Vatra <bogdan@kdab.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Move the logic to set default values for VERSION,
QMAKE_TARGET_DESCRIPTION to qt_app.prf. This way,
a lot more executables get sane defaults.
Change-Id: I8394418c118a8877cec792eddc8894397c0fbf2d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Make the tool description even simpler so that e.g. moc shows up as
"Qt Moc". The 'description' is shown in various places as the mere
title, so it shouldn't be too verbose.
This augments change ad68bf51e7.
Task-number: QTBUG-61970
Change-Id: I4b30b95a10d597a9a8a2c388c2381ea38a340be6
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Instead of expanding the VULKAN_SDK environment variable at Makefile
processing time, expand it at qmake time, so that a resolved include
path is passed to WebEngine's build system GN.
Task-number: QTBUG-61823
Change-Id: I63bd661350883d22af2ccdeb7c360ed0d8d881c8
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
Change f046ed395a set the default values of VERSION and
QMAKE_TARGET_DESCRIPTION for Qt tools to generic ones. The version and
description is shown in the properties of the executable, but also
used for crash reports. For the latter it wasn't clear anymore which
tool actually crashed.
The patch therefore adds the executable name to the generic description.
Tools can still overwrite the description on their own.
Task-number: QTBUG-61970
Change-Id: I8366db22f88f0d6575e7f482f030b3c4f05af6c5
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
silent.prf modifies the compiler commands by prefixing them with a
silencing echo command. For MSVC, the used $< syntax is only valid in
inference rules. However, the PCH rule is not an inference
rule and breaks when silent.prf is used.
Remove the echo command for MSVC. The compiler already outputs the
currently compiled file. There's no need to do it twice.
Task-number: QTBUG-61688
Change-Id: I7e2c1211e471c9c149c16cac8e87406e88ee2d97
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
The script will look for the most recent Qt Creator version on the system,
and pick up the LLDB summary providers from there, allowing pretty-printing
of Qt types inside LLDB/Xcode.
LLDB will detect the file when loading the dSYM, and inform the user that
the file can be loaded to enable the formatters. The script can be loaded
automatically by adding the following setting in ~/.lldbinit:
settings set target.load-script-from-symbol-file true
Which comes as a slight security risk, as other libraries might have
scripts of their own. The alternative is to load the script directly
from ~/.lldbinit:
command script import "<path to debug script in dSYM>"
With an optional target.load-script-from-symbol-file set to false, to
silence the warning when loading the dSYM bundle.
Change-Id: I01ba51dab725a8d0a58f1ad1749742443b639cc5
Reviewed-by: hjk <hjk@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
With 4183475080, Qt fails to build if
qmake is unable to detect the compiler's default include and
library search paths. Clang on non-Darwin systems was missing working
code for the detection.
Unlike GCC, Clang on its own does not print the library search paths
when called with the -v option.
On Darwin, the -Wl,-v option will reach ld64, which will print those paths.
However, neither GNU ld nor gold will print anything useful with just
-v. GNU ld has a --verbose option that does print some search paths, but
those are not the ones used when ld is invoked (via collect2) by GCC or
Clang, so it can't be used.
To make Clang print its library search paths one can use
-print-search-dirs, which however doesn't print include search paths. So
amend the existing code in order to make a second call to clang on
non-Darwin systems. This second call is used for library path detection,
and fixes the build on non-Darwin (tested on Linux).
Change-Id: Ic858f908ee1a2e0eb307abb074daee0ded38abd5
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
It is considered slightly faster than the default mode[1],
but on Windows it causes trouble when aborting the build,
it leaves behind zero-sized object files which cause link
error. See discussion in the bug-make mailing list[2].
[1] https://stackoverflow.com/a/1512947/764870
[2] http://lists.gnu.org/archive/html/bug-make/2017-06/msg00066.html
Change-Id: I7aa0b328a8c743fdfe9b0aece02b329066515076
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
It prints the warning even if we surround the affected code with
QT_WARNING_DISABLE_GCC("-Wstringop-overflow") (see e4eaa62943),
so we have no alternative other than to disable the warning completely.
Change-Id: Ia3e896da908f42939148fffd14c488c4006040e6
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
System headers like tchar.h need the _UNICODE define, not UNICODE.
While qplatformdefs.h already provides _UNICODE when UNICODE is
defined, users might want to include tchar.h without Qt includes.
This is consistent with Visual Studio's default defines.
Task-number: QTBUG-61411
Change-Id: I2f604368080270d840f0dbb2cf273805d2ba5239
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The strings in Windows VersionInformation resources should be
capitalized by convention, and the entries are usually not terminated
by a dot. However, "Ltd." is an abbreviation and should be
dot-terminated.
Change-Id: Ibea3443ac38846e29a3e77ab3e8d5d77b9370272
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
This creates a VersionInfo resource on Windows for Qt's tool
executables similar to what Qt's DLLs contain.
Task-number: QTBUG-55755
Change-Id: I9e5d7bedaec9d14f29a9eeeb6697b07241f860d8
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Any version prior to 2015 is not supported anymore.
Change-Id: I9ccc87fc506521b560fda1b4c88f9c3aebd7a485
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Introduce uap3 namespace which is used for newly introduced
capabilities. In addition, the autodetection of namespaces for
capabilities within the uap namespace is disabled in Visual Studio
lately. Hence, the output needs to be more verbose including the
namespace for a capability.
Task-number: QTBUG-60899
Change-Id: Ia1ccf825d4c257d2661e34c195c45fd37e0b6413
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
uikit/sdk.prf replaces QMAKE_MAC_SDK_PATH with a make expansion of that
variable, which of course does not work when we use the contents
directly.
amends 6d5489f5d.
Task-number: QTBUG-61690
Change-Id: Id77dff8ee7d737dd35f74cc7d39faaa50b4b1ab9
Reviewed-by: Eike Ziller <eike.ziller@qt.io>
Some users don't want to download the full Xcode installation which can
weigh upwards of 5 GB download and 20 GB installed.
[ChangeLog][macOS / iOS] Qt can now be built using just the Xcode
Command Line Tools, without needing to install the full Xcode IDE.
Task-number: QTBUG-35928
Task-number: QTBUG-41908
Change-Id: I6d13c9a03ab9087b3ab56e8547f53f0cc2806c7b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
