The init()/cleanup() code in tst_qfiledialog and tst_qfiledialog2
currently differs and fails to clean up the settings file
since it only removes the legacy settings under the Qt group
and instantiates a new QFileDialog while the QSettings class
is still in scope. Also, it has no means of clearing the
setLastVisitedDirectory(), which causes the
tst_QFiledialog::completer() and tst_QFiledialog::history() tests
to interfere, leaving the settings in an invalid state.
tst_qfiledialog2 does not use QStandardPaths::setTestModeEnabled(().
- Ensure the last visited URL is always clean by
making QFileDialogPrivate::setLastVisitedDirectory()
static and calling it from init().
- Introduce a cleanupSettingsFile() function to the tests that
cleans both groups and call it from initTestCase() and cleanup()
to ensure a clean state.
- Add QStandardPaths::setTestModeEnabled() to tst_qfiledialog2.
Fixes sporadic test fails when executing
tst_QFiledialog::completer() and tst_QFiledialog::history()
in a sequence.
Task-number: QTBUG-45764
Change-Id: I24de3caabf77be067b385d64ff11b7a07fe12b72
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
This one has not been unsed for ages (since Qt3?).
Change-Id: Iaf514db1b698b34a303f34c150b72db989eb176c
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Many times set but never used.
Change-Id: I297f21d4b9878e5f9559a2dfdb2d3de34107bb7d
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
1. Checking if `db->count == 0` inside the
`for (int x = 0; x < db->count; ++x)` loop makes absolutely no sense;
2. The family gets loaded just a line above (ensurePopulated()).
Change-Id: I72dbd42565c4f5a5d9ff8879f10ee0ece7298fa7
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
There is no sense in comparing fonts with different resolve_mask-s.
Change-Id: Icfdaf494fce8a59b7138d96fdf7354cc0514ca6a
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
When resolve_mask is 0, the font inherits just everything, and there is
no need in checking for any resolved attributes;
the resolved font always inherits dpi, so do not check it either.
Change-Id: Ie5d7ced0859d46a9237447e29051a22569480a51
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
These values were added as part of upgrading to Unicode 7.0
Change-Id: Ib208828a7685ba4f89f0e2f06033f74c8ff13532
Reviewed-by: Andy Shaw <andy.shaw@theqtcompany.com>
The flags are the same across all GCC flavors so put the definition
in the common gcc-base.conf instead of duplicating it in g++-base.conf
and clang.conf
Change-Id: I1ba2c3c314d3a02b559c384aecef74240f69f659
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@theqtcompany.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
In Android 5.1 the field name for the inset state member in
InsetDrawable changed from mInsetState to mState.
Task-number: QTBUG-45714
Change-Id: I0ebada1ef90954013e5357cbd10df925f8f05295
Reviewed-by: BogDan Vatra <bogdan@kde.org>
Completes the inplace converters so that we can rely on inplace
conversions to succede as long as the image depth is the same.
Change-Id: Ia1ae34b5de1bc16e87ff5403bdacfcae44a22791
Reviewed-by: Gunnar Sletta <gunnar@sletta.org>
Some inplace conversions would not set the requested image format in
the returned image, due to the same conversion being used for several
destination formats.
This patch ensures all inplace conversions return the right format,
and adds testing infrastructure to easily test iterate over all formats
so that they all can be tested.
Change-Id: I68ab17a713ddb2aa8ed6aaf0a0a1ec8bbcb56090
Reviewed-by: Gunnar Sletta <gunnar@sletta.org>
- Introduce QDebugStateSaver for all debug operators.
- Remove the "Flags=" from enumerations since their type is now output
by default.
- Added some spaces since the previous formatting relied on space=true
as a result of some debug operators erroneously returning debug.space(),
which is now fixed in qtbase.
- Fixed formatting, added noquote() where necessary, added some newlines,
used stream modifiers instead of QString::number(n, 16) to output
hex numbers.
- Fix indentation.
Change-Id: I64123a4262916e21448cda2aa61ae1100f07291a
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
The one converters from RGB30 was misplaced in the method table, and
the unpremultiplication from A2RGB30 to RGB30 had an underflow mistake
when alpha was 2.
Change-Id: I92c11ede28611a3dbdce72aca1898845c120c209
Reviewed-by: Gunnar Sletta <gunnar@sletta.org>
X server may return an empty physical screen size, for example
on VNC, Xephyr or some not very well supported hardware.
In this case it's possible to use the size of the virtual desktop,
but until now it was done only in the QXcbScreen constructor.
Move it to QXcbScreen::updateGeometry() and calculate physical screen
size using the DPI of the virtual desktop.
Task-number: QTBUG-45564
Change-Id: I6b757818a2fcefdd7b2c0aa31b840a88d625d6ae
Reviewed-by: Daniel Vrátil <dvratil@redhat.com>
Reviewed-by: Paul Olav Tvete <paul.tvete@theqtcompany.com>
Doing a build on OS X without -developer-build fails.
Change-Id: I49c178ab2428177d9dd94f84620595a4bc132244
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Change-Id: I27eaacb532114dd188c4ffff13d6c95e1026b99d
Reviewed-by: Gunnar Sletta <gunnar@sletta.org>
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Due to a behavior change.
This reverts commit 9157087334.
This reverts commit 16c32c6dfb.
Task-number: QTBUG-37946
Task-number: QTBUG-45552
Task-number: QTBUG-43563
Change-Id: Idf8df7d8f22465e8f6b51acb68993ac97208b184
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Reviewed-by: Gunnar Sletta <gunnar@sletta.org>
Changed state in MouseRelease so that QTreeView
does not end up in wrong state if drag is started
but not completed.
Task-number: QTBUG-44773
Change-Id: I0b665d2944f2b696bc4b7e79689d110aefa3f194
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
Suppress QMAKE_LFLAGS_BSYMBOLIC_FUNC (-Bsymbolic-functions for g++)
by default since it causes crashes with gcc 5.X. Since applications
compiled with gcc 5.X might run against Qt compiled with gcc 4.9.X
and CLANG might also be affected, turn it off by default.
Task-number: QTBUG-45755
Change-Id: I5704c3156db6b6f74e1c14576e5d02bcbd3082a4
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Reviewed-by: BogDan Vatra <bogdan@kde.org>
There is no reason to use the more expensive ARGB32 conversions when
there is no alpha channel involved.
Change-Id: Ifcb325352b8c806ef755db385121a2939c5825b2
Reviewed-by: Gunnar Sletta <gunnar@sletta.org>
Done by using in-place removal from the list of transitions using
iterators.
Change-Id: I6dced4b214b49b3dcd3ba19ca4cd81a601f81bb6
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
Fixed issue that text/uri-list mimedata got from QMimeData::data()
was corrupted after setting it back via QMimeData::setData()
Change-Id: I2377523a9286519402ab9127ed7f3fa66e39a679
Task-number: QTBUG-45486
Reviewed-by: David Faure <david.faure@kdab.com>
Some QImage methods were not preserving image metadata, or only
preserving some of it. This adds the missing parts and adds a test for
metadata.
Change-Id: Ib5892a23e49dfde5ea26074d3deaa887fa930c6b
Reviewed-by: Gunnar Sletta <gunnar@sletta.org>
Remove the insignificant_tests CONFIG option in favor of a BLACKLIST
file. The tests blacklisted have been found using CI builds logs.
Change-Id: I34374ed7269f941c330c65d97fe083c83d3df461
Task-number: QTBUG-33574
Task-number: QTBUG-30943
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
In certain situations, when reading a large amount of data from
sequential devices with QIODevice::readAll(), content was lost when
passing a qint64 value > QByteArray::MaxSize into QByteArray::resize(),
which takes an int. The result of the conversion to int is either negative or
calculated mod 2^32. In any case, it will at some point be < QByteArray::size(),
which prompts QByteArray to truncate, losing already-read content.
Fix by adding an explicit size check before calling QByteArray::resize().
This shows once more that an API that uses int for sizes is dangerous.
Esp. on 64-bit platforms.
Change-Id: I30fbfad0bf37476c34141b6f3786e7e0fc8e1e74
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
The test keeps failing, perfectly when run singly btw. However the approach of
sending mouse move events is inherently fragile due to the use of
QCursor::setPos and the expectation that that produces the correct sequence of
mouse move events.
Change-Id: I12ba1afcfd3fab965b8f93d5def48b435fd2ff33
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Swap title and message parameters in the QBalloonTip::showBalloon() call.
It was wrong in f277c07467 on xcb platform.
Task-number: QTBUG-43428
Change-Id: I18e354703d9fa9c196b2789e6df263debdb7ce06
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
QMAKE_BUNDLE_DATA itself does as well, and it can refer to versioned
resources.
Change-Id: I3d9bf23c2ff81dbb1cd929f3f0e0ce1e67f3258a
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
CMake INTERFACE targets may only have whitelisted properties, and
FRAMEWORK is not in the whitelist in released CMake versions.
Change-Id: I27cd0cfbe1b52f25c91bf1b3c0d55879bed91bdf
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Stephen Kelly <steveire@gmail.com>
This enables rendering of Emoji symbols.
Task-number: QTBUG-45811
Change-Id: I7cb128dab717870929e02ea9ec253f36fef29804
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Remove a superfluous implementation of
VcprojGenerator::replaceExtraCompilerVariables.
The implementation in the base class is exactly the same.
Use that instead.
Change-Id: Ie7d995be1b0d55fbefd15ae6b7a992237d97839c
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
The foreign window implementation was trying to handle parent/child
relationships, but it's not supported by the platform implementation
and was therefore causing more problems then it was solving. E.g.,
even simple use cases, such as the parent moving or re-sizing its
geometry would not be handle correctly.
With this change the parent/child relationship is removed and the
geometry of the foreign window will always expect the geometry to
be in the global coordinate system.
Task-number: QTBUG-43391
Change-Id: I02a1f9cb9eb9fb5ace9b7e912c523bda7c5bfd5c
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
Remove the insignificant_test CONFIG option in favor of a BLACKLIST
file. This test has been found failing on OpenSuse in CI.
Change-Id: Ibc6af3c30277fec7e422e8bbeccd9437de2a61ce
Task-number: QTBUG-23837
Reviewed-by: Kai Koehne <kai.koehne@theqtcompany.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@theqtcompany.com>
As per GL_EXT_swap_control this results in BadWindow.
Task-number: QTBUG-45705
Change-Id: Ia3e3f66f326d8f6145d82f33f964b0d6996f0959
Reviewed-by: Gunnar Sletta <gunnar@sletta.org>
For classes declared in a namespace, QDoc needs to take account
the fact that its base classes typically are not qualified with
the namespace name if those base classes are from the same
namespace.
There already was code for this, but it was disabled by a macro.
This change re-enables it, and adds an additional check to
restart the search in valid namespaces only.
Change-Id: Ia07dcb783b59de5fc9ddcfd43000a63c6c74ebe1
Reviewed-by: Martin Smith <martin.smith@digia.com>
Since Qt 5.0 (commit 09dd19df) sign is ignored when testing
whether a QPointF or QSizeF is null.
This updates the documentation accordingly.
Change-Id: I3de1c748f3caa63b8bd8990006de5ba572eac83e
Task-number: QTBUG-45669
Reviewed-by: Mitch Curtis <mitch.curtis@digia.com>
Reviewed-by: Venugopal Shivashankar <venugopal.shivashankar@digia.com>
When QDoc constructs the full path to a documentation node, it
must construct a clean anchor reference. Intra-page links use
a different code path, so the links e.g. from Member Functions
list to their detailed descriptions always work, but using the
link command to link to functions with certain characters (such
as 'operator==') failed because the node name was used as-is and
not sanitized ('operator-eq-eq').
This change moves HtmlGenerator::cleanRef() static function to
its parent class, Generator, and takes it into use in
Generator::fullDocumentLocation().
Change-Id: Ic939ffa3ae0f4495ef2a30eff0d4a1de65ea3e8f
Task-number: QTBUG-45629
Reviewed-by: Martin Smith <martin.smith@digia.com>
Use QWidget::move() to position floating dock widgets.
Add a test for QMainWindow::restoreDockWidget().
Task-number: QTBUG-45780
Change-Id: I945917728a663916e8c225b9d3d2a75fa508d68f
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
...and port to the remaining one.
Can't do the same for QMatrix4x4, because that class is exported.
Change-Id: I5448921af9e9194532be1b9f8d739b5c418a5e0b
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
The compiler-generated one is just fine.
Change-Id: Iaacc56d4224c69b66823cc64640a00117c44d3cc
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
recent change ad03511256 made r be
arbitrary, not just -1, 0, +1, and now it doesn't make sense to have two
unneeded unconditional branches in the sort-by-size case
Change-Id: I9d80210846e89e3e8c574f0c32e04b05202b8a5b
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Even with SSE4 optimized unpremultiply it is still significantly faster
to skip the calculation on alpha values 0 and 255.
Change-Id: Iafe658fea8eacf35a857f292952b0c1ee056139c
Reviewed-by: Gunnar Sletta <gunnar@sletta.org>
On OS X 10.10. This test in tst_QComboBox is currently failing in CI.
Change-Id: Ie326f79a900c3ae926c7ebe5bb5880dd422cee60
Task-number: QTBUG-45531
Reviewed-by: David Faure <david.faure@kdab.com>
this makes the distclean targets work throughout qt.
the dreaded confclean target is aliased to distclean.
Task-number: QTBUG-8202
Task-number: QTBUG-20566
Change-Id: I7ac8e3b5b0110825dc93e4fa885281db91c6cf83
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
